From 062b7c0c141b6d28a037c6acf3a822539e701827 Mon Sep 17 00:00:00 2001 From: Kazu Hirata Date: Thu, 19 Dec 2002 01:11:31 +0000 Subject: * doc/c-alpha.texi: Fix typos. * doc/c-arm.texi: Likewise. * doc/c-d10v.texi: Likewise. * doc/c-i370.texi: Likewise. * doc/c-i960.texi: Likewise. * doc/c-ia64.texi: Likewise. * doc/c-mmix.texi: Likewise. * doc/c-ns32k.texi: Likewise. * doc/c-pdp11.texi: Likewise. * doc/c-pj.texi: Likewise. * doc/c-sh64.texi: Likewise. * doc/c-sparc.texi: Likewise. * doc/c-tic54x.texi: Likewise. * doc/c-v850.texi: Likewise. * doc/c-vax.texi: Likewise. * doc/internals.texi: Likewise. --- gas/doc/c-alpha.texi | 2 +- gas/doc/c-arm.texi | 2 +- gas/doc/c-d10v.texi | 2 +- gas/doc/c-i370.texi | 4 ++-- gas/doc/c-i960.texi | 2 +- gas/doc/c-ia64.texi | 2 +- gas/doc/c-mmix.texi | 2 +- gas/doc/c-ns32k.texi | 2 +- gas/doc/c-pdp11.texi | 6 +++--- gas/doc/c-pj.texi | 2 +- gas/doc/c-sh64.texi | 2 +- gas/doc/c-sparc.texi | 2 +- gas/doc/c-tic54x.texi | 8 ++++---- gas/doc/c-v850.texi | 2 +- gas/doc/c-vax.texi | 2 +- gas/doc/internals.texi | 12 ++++++------ 16 files changed, 27 insertions(+), 27 deletions(-) (limited to 'gas/doc') diff --git a/gas/doc/c-alpha.texi b/gas/doc/c-alpha.texi index 5b52c5a..359dfcc 100644 --- a/gas/doc/c-alpha.texi +++ b/gas/doc/c-alpha.texi @@ -413,7 +413,7 @@ is in effect. When @code{at} is in effect, a warning will be generated if @code{$at} is used by the programmer. @item macro -Enables the expasion of macro instructions. Note that variants of real +Enables the expansion of macro instructions. Note that variants of real instructions, such as @code{br label} vs @code{br $31,label} are considered alternate forms and not macros. diff --git a/gas/doc/c-arm.texi b/gas/doc/c-arm.texi index 0b52370..5b67f97 100644 --- a/gas/doc/c-arm.texi +++ b/gas/doc/c-arm.texi @@ -289,7 +289,7 @@ The ARM family uses @sc{ieee} floating-point numbers. This is the generic @var{.align} directive. For the ARM however if the first argument is zero (ie no alignment is needed) the assembler will behave as if the argument had been 2 (ie pad to the next four byte -boundary). This is for compatability with ARM's own assembler. +boundary). This is for compatibility with ARM's own assembler. @cindex @code{req} directive, ARM @item @var{name} .req @var{register name} diff --git a/gas/doc/c-d10v.texi b/gas/doc/c-d10v.texi index 9b3072c..0db379c 100644 --- a/gas/doc/c-d10v.texi +++ b/gas/doc/c-d10v.texi @@ -227,7 +227,7 @@ Any symbol followed by @code{@@word} will be replaced by the symbol's value shifted right by 2. This is used in situations such as loading a register with the address of a function (or any other code fragment). For example, if you want to load a register with the location of the function @code{main} then -jump to that function, you could do it as follws: +jump to that function, you could do it as follows: @smallexample @group ldi r2, main@@word diff --git a/gas/doc/c-i370.texi b/gas/doc/c-i370.texi index e5947d7..0c28f44 100644 --- a/gas/doc/c-i370.texi +++ b/gas/doc/c-i370.texi @@ -73,7 +73,7 @@ for r3 and rpgt or r.pgt for r4. @samp{*} is the current location counter. Unlike @samp{.} it is always relative to the last USING directive. Note that this means that -expressions cannot use multiplication, as any occurence of @samp{*} +expressions cannot use multiplication, as any occurrence of @samp{*} will be interpreted as a location counter. All labels are relative to the last USING. Thus, branches to a label @@ -103,7 +103,7 @@ directive). @cindex floating point, ESA/390 (@sc{ieee}) @cindex ESA/390 floating point (@sc{ieee}) The assembler generates only @sc{ieee} floating-point numbers. The older -floiating point formats are not supported. +floating point formats are not supported. @node ESA/390 Directives diff --git a/gas/doc/c-i960.texi b/gas/doc/c-i960.texi index c39d3c5..dad2fc4 100644 --- a/gas/doc/c-i960.texi +++ b/gas/doc/c-i960.texi @@ -76,7 +76,7 @@ number of times the branch @emph{was} taken. @cindex branch statistics table, i960 A table of every such @code{Label} is also generated, so that the external postprocessor @code{gbr960} (supplied by Intel) can locate all -the counters. This table is always labelled @samp{__BRANCH_TABLE__}; +the counters. This table is always labeled @samp{__BRANCH_TABLE__}; this is a local symbol to permit collecting statistics for many separate object files. The table is word aligned, and begins with a two-word header. The first word, initialized to 0, is used in maintaining linked diff --git a/gas/doc/c-ia64.texi b/gas/doc/c-ia64.texi index 0885f1b..61f7c84 100644 --- a/gas/doc/c-ia64.texi +++ b/gas/doc/c-ia64.texi @@ -44,7 +44,7 @@ flag in the ELF file header. This option instructs the assembler to mark the resulting object file as using the ``constant GP without function descriptor'' data model. This model is like the ``constant GP'' model, except that it -additionaly does away with function descriptors. What this means is +additionally does away with function descriptors. What this means is that the address of a function refers directly to the function's code entry-point. Normally, such an address would refer to a function descriptor, which contains both the code entry-point and the GP-value diff --git a/gas/doc/c-mmix.texi b/gas/doc/c-mmix.texi index e3622ac..d1b3016 100644 --- a/gas/doc/c-mmix.texi +++ b/gas/doc/c-mmix.texi @@ -65,7 +65,7 @@ at link time if the operand does not fit. The @code{mmixal} documentation (@pxref{mmixsite}) specifies that global registers allocated with the @samp{GREG} directive (@pxref{MMIX-greg}) and initialized to the same non-zero value, will refer to the same global -register. This isn't strictly enforcable in @code{@value{AS}} since the +register. This isn't strictly enforceable in @code{@value{AS}} since the final addresses aren't known until link-time, but it will do an effort unless the @samp{--no-merge-gregs} option is specified. (Register merging isn't yet implemented in @code{@value{LD}}.) diff --git a/gas/doc/c-ns32k.texi b/gas/doc/c-ns32k.texi index aee17df..a80075c 100644 --- a/gas/doc/c-ns32k.texi +++ b/gas/doc/c-ns32k.texi @@ -16,7 +16,7 @@ is compiled. @section Syntax I don't know anything about the 32x32 syntax assembled by -@code{@value{AS}}. Someone who undersands the processor (I've never seen +@code{@value{AS}}. Someone who understands the processor (I've never seen one) and the possible syntaxes should write this section. @section Floating Point diff --git a/gas/doc/c-pdp11.texi b/gas/doc/c-pdp11.texi index 0412238..a9d9c8a 100644 --- a/gas/doc/c-pdp11.texi +++ b/gas/doc/c-pdp11.texi @@ -40,7 +40,7 @@ Generate position-independent (or position-dependent) code. The default is to generate position-independent code. @end table -@subsection Instruction Set Extention Options +@subsection Instruction Set Extension Options These options enables or disables the use of extensions over the base line instruction set as introduced by the first PDP-11 CPU: the KA11. @@ -63,7 +63,7 @@ Disable all instruction set extensions. @cindex -mcis @cindex -mno-cis @item -mcis | -mno-cis -Enable (or disable) the use of the commersial instruction set, which +Enable (or disable) the use of the commercial instruction set, which consists of these instructions: @code{ADDNI}, @code{ADDN}, @code{ADDPI}, @code{ADDP}, @code{ASHNI}, @code{ASHN}, @code{ASHPI}, @code{ASHP}, @code{CMPCI}, @code{CMPC}, @code{CMPNI}, @code{CMPN}, @code{CMPPI}, @@ -96,7 +96,7 @@ consists of these instructions: @code{ASHC}, @code{ASH}, @code{DIV}, @cindex -mno-kev11 @item -mfis | -mkev11 @itemx -mno-fis | -mno-kev11 -Enable (or diasble) the use of the KEV11 floating-point instructions: +Enable (or disable) the use of the KEV11 floating-point instructions: @code{FADD}, @code{FDIV}, @code{FMUL}, and @code{FSUB}. @cindex -mfpp diff --git a/gas/doc/c-pj.texi b/gas/doc/c-pj.texi index fc7b948..76d38d2 100644 --- a/gas/doc/c-pj.texi +++ b/gas/doc/c-pj.texi @@ -15,7 +15,7 @@ @cindex PJ options @cindex options, PJ -@code{@value{AS}} has two addiitional command-line options for the picoJava +@code{@value{AS}} has two additional command-line options for the picoJava architecture. @table @code @item -ml diff --git a/gas/doc/c-sh64.texi b/gas/doc/c-sh64.texi index 02045a8..0107ff3 100644 --- a/gas/doc/c-sh64.texi +++ b/gas/doc/c-sh64.texi @@ -144,7 +144,7 @@ example: In that example, the first longword may or may not have the least significant bit set depending on whether the label is an SHmedia label or an SHcompact label. The second longword will be the actual address -of the label, regardless of what type of lable it is. +of the label, regardless of what type of label it is. @node SH64 Directives @section SH64 Machine Directives diff --git a/gas/doc/c-sparc.texi b/gas/doc/c-sparc.texi index 624c21e..c34950e 100644 --- a/gas/doc/c-sparc.texi +++ b/gas/doc/c-sparc.texi @@ -162,7 +162,7 @@ line is also ignored. This directive declares use of a global application or system register. It must be followed by a register name %g2, %g3, %g6 or %g7, comma and the symbol name for that register. If symbol name is @code{#scratch}, -it is a scratch register, if it is @code{#ignore}, it just surpresses any +it is a scratch register, if it is @code{#ignore}, it just suppresses any errors about using undeclared global register, but does not emit any information about it into the object file. This can be useful e.g. if you save the register before use and restore it after. diff --git a/gas/doc/c-tic54x.texi b/gas/doc/c-tic54x.texi index 52079d6..500f278 100644 --- a/gas/doc/c-tic54x.texi +++ b/gas/doc/c-tic54x.texi @@ -618,7 +618,7 @@ equivalent of those, and the structure offset is adjusted accordingly. @code{.field} and @code{.string} are also allowed; the size of @code{.field} is one bit, and @code{.string} is considered to be one word in size. Only element descriptors, structure/union tags, -@code{.align} and conditioanl assembly directies are allowed within +@code{.align} and conditional assembly directives are allowed within @code{.struct}/@code{.endstruct}. @code{.align} aligns member offsets to word boundaries only. @var{ssize}, if provided, will always be assigned the size of the structure. @@ -650,7 +650,7 @@ Starting offset for the union is always zero. @cindex @code{usect} directive, C54X @item [@var{symbol}] .usect "@var{section_name}", @var{size}, [,[@var{blocking_flag}] [,@var{alignment_flag}]] -Reserve space for variables in a named, uninitialzed section (similar to +Reserve space for variables in a named, uninitialized section (similar to .bss). @code{.usect} allows definitions sections independent of .bss. @var{symbol} points to the first location reserved by this allocation. The symbol may be used as a variable name. @var{size} is the allocated @@ -692,7 +692,7 @@ If the number of arguments passed the macro invocation exceeds the number of parameters defined, the last parameter is assigned the string equivalent of all remaining arguments. If fewer arguments are given than parameters, the missing parameters are assigned empty strings. To -include a comma in an argument, you must enclose the agument in quotes. +include a comma in an argument, you must enclose the argument in quotes. @cindex subsym builtins, C54X @cindex C54X subsym builtins @@ -764,4 +764,4 @@ Returns the reference point of the structure or union represented by The following symbols are recognized as memory-mapped registers: @table @code -@end table \ No newline at end of file +@end table diff --git a/gas/doc/c-v850.texi b/gas/doc/c-v850.texi index f67ad5c..432f3ba 100644 --- a/gas/doc/c-v850.texi +++ b/gas/doc/c-v850.texi @@ -281,7 +281,7 @@ address of the label 'here' and store it into register 6: @samp{movea lo(here), r6, r6} The reason for this special behaviour is that movea performs a sign -extention on its immediate operand. So for example if the address of +extension on its immediate operand. So for example if the address of 'here' was 0xFFFFFFFF then without the special behaviour of the hi() pseudo-op the movhi instruction would put 0xFFFF0000 into r6, then the movea instruction would takes its immediate operand, 0xFFFF, sign extend diff --git a/gas/doc/c-vax.texi b/gas/doc/c-vax.texi index b4d5d3e..59d82d2 100644 --- a/gas/doc/c-vax.texi +++ b/gas/doc/c-vax.texi @@ -2,7 +2,7 @@ @c Free Software Foundation, Inc. @c This is part of the GAS manual. @c For copying conditions, see the file as.texinfo. -@c VAX/VMS description exhanced and corrected by Klaus K"aempf, kkaempf@progis.de +@c VAX/VMS description enhanced and corrected by Klaus K"aempf, kkaempf@progis.de @ifset GENERIC @node Vax-Dependent @chapter VAX Dependent Features diff --git a/gas/doc/internals.texi b/gas/doc/internals.texi index 23f2fce..0d54d4f 100644 --- a/gas/doc/internals.texi +++ b/gas/doc/internals.texi @@ -1421,7 +1421,7 @@ colon, the adjoining tokens can be distinguished. This option affects the preprocessor so that whitespace around colons is preserved. This is useful when colons might be removed from the input after preprocessing but before assembling, so that adjoining tokens can still be distinguished if there is -whitespace, or concatentated if there is not. +whitespace, or concatenated if there is not. @item tc_frob_section @cindex tc_frob_section @@ -1437,7 +1437,7 @@ symbols. @item tc_frob_symbol @cindex tc_frob_symbol If you define this macro, GAS will call it for each symbol. You can indicate -that the symbol should not be included in the object file by definining this +that the symbol should not be included in the object file by defining this macro to set its second argument to a non-zero value. @item tc_frob_file @@ -1548,7 +1548,7 @@ another. @item obj_sec_sym_ok_for_reloc @cindex obj_sec_sym_ok_for_reloc You may define this macro to indicate that it is OK to use a section symbol in -a relocateion entry. If it is not, GAS will define a new symbol at the start +a relocation entry. If it is not, GAS will define a new symbol at the start of a section. @item EMIT_SECTION_SYMBOLS @@ -1590,7 +1590,7 @@ symbols. @item obj_frob_symbol @cindex obj_frob_symbol If you define this macro, GAS will call it for each symbol. You can indicate -that the symbol should not be included in the object file by definining this +that the symbol should not be included in the object file by defining this macro to set its second argument to a non-zero value. @item obj_frob_file @@ -1652,7 +1652,7 @@ case, don't describe the smaller-range, inferior mode. The @code{fr_subtype} field of a frag is an index into a CPU-specific relaxation table. That table entry indicates the range of values that can be stored, the number of bytes that will have to be added to the frag to -accomodate the addressing mode, and the index of the next entry to examine if +accommodate the addressing mode, and the index of the next entry to examine if the value to be stored is outside the range accessible by the current addressing mode. The @code{fr_symbol} field of the frag indicates what symbol is to be accessed; the @code{fr_offset} field is added in. @@ -1740,7 +1740,7 @@ It can be accessed via @code{fr_opcode} or @code{fr_fix}. If you generate frags separately for the basic insn opcode and any relaxable operands, do not call @code{fix_new} thinking you can emit fixups for the -opcode field from the relaxable frag. It is not garanteed to be the same frag. +opcode field from the relaxable frag. It is not guaranteed to be the same frag. If you need to emit fixups for the opcode field from inspection of the relaxable frag, then you need to generate a common frag for both the basic opcode and relaxable fields, or you need to provide the frag for the opcode to -- cgit v1.1