From 5a6996172e6294ea37054b1a9caa3a923a8fe399 Mon Sep 17 00:00:00 2001 From: Rainer Orth Date: Mon, 6 Aug 2018 16:05:16 +0200 Subject: Update dg-extract-results.* from gcc When looking at the gdb.sum file produced by dg-extract-results.sh on Solaris 11/x86, I noticed some wrong sorting, like this: PASS: gdb.ada/addr_arith.exp: print something'address + 0 PASS: gdb.ada/addr_arith.exp: print 0 + something'address PASS: gdb.ada/addr_arith.exp: print something'address - 0 PASS: gdb.ada/addr_arith.exp: print 0 - something'address Looking closer, I noticed that while dg-extract-results.sh had been copied over from contrib in the gcc repo, the corresponding dg-extract-results.py file had not. The latter not only fixes the sorting problem I'd observed, but is also way faster than the shell version (like a factor of 50 faster). Therefore I propose to update both files from the gcc repo. The changes to the .sh version are trivial, just counting the number of DejaGnu ERROR lines, too. The files are moved to toplevel contrib: * This way, they can easily be used should someone decide to parallelize one or more of the binutils, gas, or ld testsuites. * They are less easily overlooked for updates from the gcc repo when they reside in the same place in both. * The test_summary script needs to live in contrib since the toplevel Makefile's mail-report.log target expects it there. Tested on amd64-pc-solaris2.11 with make -j16 check and make -j16 -k RACY_ITER=5 check gdb/testsuite: * dg-extract-results.sh: Move to toplevel contrib. * Makefile.in (check-parallel): Reflect dg-extract-results.sh move. * Makefile.in (check-parallel-racy): Likewise. contrib: * dg-extract-results.sh: Move from gdb/testsuite. Update from gcc repo. * dg-extract-results.py: New from gcc repo. --- contrib/ChangeLog | 5 + contrib/dg-extract-results.py | 592 ++++++++++++++++++++++++++++++++++++++++++ contrib/dg-extract-results.sh | 459 ++++++++++++++++++++++++++++++++ 3 files changed, 1056 insertions(+) create mode 100644 contrib/ChangeLog create mode 100644 contrib/dg-extract-results.py create mode 100755 contrib/dg-extract-results.sh (limited to 'contrib') diff --git a/contrib/ChangeLog b/contrib/ChangeLog new file mode 100644 index 0000000..8ce6765 --- /dev/null +++ b/contrib/ChangeLog @@ -0,0 +1,5 @@ +2018-08-06 Rainer Orth + + * dg-extract-results.sh: Move from gdb/testsuite. + Update from gcc repo. + * dg-extract-results.py: New from gcc repo. diff --git a/contrib/dg-extract-results.py b/contrib/dg-extract-results.py new file mode 100644 index 0000000..4b02a5b --- /dev/null +++ b/contrib/dg-extract-results.py @@ -0,0 +1,592 @@ +#!/usr/bin/python +# +# Copyright (C) 2014 Free Software Foundation, Inc. +# +# This script is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3, or (at your option) +# any later version. + +import sys +import getopt +import re +import io +from datetime import datetime +from operator import attrgetter + +# True if unrecognised lines should cause a fatal error. Might want to turn +# this on by default later. +strict = False + +# True if the order of .log segments should match the .sum file, false if +# they should keep the original order. +sort_logs = True + +# A version of open() that is safe against whatever binary output +# might be added to the log. +def safe_open (filename): + if sys.version_info >= (3, 0): + return open (filename, 'r', errors = 'surrogateescape') + return open (filename, 'r') + +# Force stdout to handle escape sequences from a safe_open file. +if sys.version_info >= (3, 0): + sys.stdout = io.TextIOWrapper (sys.stdout.buffer, + errors = 'surrogateescape') + +class Named: + def __init__ (self, name): + self.name = name + +class ToolRun (Named): + def __init__ (self, name): + Named.__init__ (self, name) + # The variations run for this tool, mapped by --target_board name. + self.variations = dict() + + # Return the VariationRun for variation NAME. + def get_variation (self, name): + if name not in self.variations: + self.variations[name] = VariationRun (name) + return self.variations[name] + +class VariationRun (Named): + def __init__ (self, name): + Named.__init__ (self, name) + # A segment of text before the harness runs start, describing which + # baseboard files were loaded for the target. + self.header = None + # The harnesses run for this variation, mapped by filename. + self.harnesses = dict() + # A list giving the number of times each type of result has + # been seen. + self.counts = [] + + # Return the HarnessRun for harness NAME. + def get_harness (self, name): + if name not in self.harnesses: + self.harnesses[name] = HarnessRun (name) + return self.harnesses[name] + +class HarnessRun (Named): + def __init__ (self, name): + Named.__init__ (self, name) + # Segments of text that make up the harness run, mapped by a test-based + # key that can be used to order them. + self.segments = dict() + # Segments of text that make up the harness run but which have + # no recognized test results. These are typically harnesses that + # are completely skipped for the target. + self.empty = [] + # A list of results. Each entry is a pair in which the first element + # is a unique sorting key and in which the second is the full + # PASS/FAIL line. + self.results = [] + + # Add a segment of text to the harness run. If the segment includes + # test results, KEY is an example of one of them, and can be used to + # combine the individual segments in order. If the segment has no + # test results (e.g. because the harness doesn't do anything for the + # current configuration) then KEY is None instead. In that case + # just collect the segments in the order that we see them. + def add_segment (self, key, segment): + if key: + assert key not in self.segments + self.segments[key] = segment + else: + self.empty.append (segment) + +class Segment: + def __init__ (self, filename, start): + self.filename = filename + self.start = start + self.lines = 0 + +class Prog: + def __init__ (self): + # The variations specified on the command line. + self.variations = [] + # The variations seen in the input files. + self.known_variations = set() + # The tools specified on the command line. + self.tools = [] + # Whether to create .sum rather than .log output. + self.do_sum = True + # Regexps used while parsing. + self.test_run_re = re.compile (r'^Test Run By (\S+) on (.*)$') + self.tool_re = re.compile (r'^\t\t=== (.*) tests ===$') + self.result_re = re.compile (r'^(PASS|XPASS|FAIL|XFAIL|UNRESOLVED' + r'|WARNING|ERROR|UNSUPPORTED|UNTESTED' + r'|KFAIL):\s*(.+)') + self.completed_re = re.compile (r'.* completed at (.*)') + # Pieces of text to write at the head of the output. + # start_line is a pair in which the first element is a datetime + # and in which the second is the associated 'Test Run By' line. + self.start_line = None + self.native_line = '' + self.target_line = '' + self.host_line = '' + self.acats_premable = '' + # Pieces of text to write at the end of the output. + # end_line is like start_line but for the 'runtest completed' line. + self.acats_failures = [] + self.version_output = '' + self.end_line = None + # Known summary types. + self.count_names = [ + '# of DejaGnu errors\t\t', + '# of expected passes\t\t', + '# of unexpected failures\t', + '# of unexpected successes\t', + '# of expected failures\t\t', + '# of unknown successes\t\t', + '# of known failures\t\t', + '# of untested testcases\t\t', + '# of unresolved testcases\t', + '# of unsupported tests\t\t' + ] + self.runs = dict() + + def usage (self): + name = sys.argv[0] + sys.stderr.write ('Usage: ' + name + + ''' [-t tool] [-l variant-list] [-L] log-or-sum-file ... + + tool The tool (e.g. g++, libffi) for which to create a + new test summary file. If not specified then output + is created for all tools. + variant-list One or more test variant names. If the list is + not specified then one is constructed from all + variants in the files for . + sum-file A test summary file with the format of those + created by runtest from DejaGnu. + If -L is used, merge *.log files instead of *.sum. In this + mode the exact order of lines may not be preserved, just different + Running *.exp chunks should be in correct order. +''') + sys.exit (1) + + def fatal (self, what, string): + if not what: + what = sys.argv[0] + sys.stderr.write (what + ': ' + string + '\n') + sys.exit (1) + + # Parse the command-line arguments. + def parse_cmdline (self): + try: + (options, self.files) = getopt.getopt (sys.argv[1:], 'l:t:L') + if len (self.files) == 0: + self.usage() + for (option, value) in options: + if option == '-l': + self.variations.append (value) + elif option == '-t': + self.tools.append (value) + else: + self.do_sum = False + except getopt.GetoptError as e: + self.fatal (None, e.msg) + + # Try to parse time string TIME, returning an arbitrary time on failure. + # Getting this right is just a nice-to-have so failures should be silent. + def parse_time (self, time): + try: + return datetime.strptime (time, '%c') + except ValueError: + return datetime.now() + + # Parse an integer and abort on failure. + def parse_int (self, filename, value): + try: + return int (value) + except ValueError: + self.fatal (filename, 'expected an integer, got: ' + value) + + # Return a list that represents no test results. + def zero_counts (self): + return [0 for x in self.count_names] + + # Return the ToolRun for tool NAME. + def get_tool (self, name): + if name not in self.runs: + self.runs[name] = ToolRun (name) + return self.runs[name] + + # Add the result counts in list FROMC to TOC. + def accumulate_counts (self, toc, fromc): + for i in range (len (self.count_names)): + toc[i] += fromc[i] + + # Parse the list of variations after 'Schedule of variations:'. + # Return the number seen. + def parse_variations (self, filename, file): + num_variations = 0 + while True: + line = file.readline() + if line == '': + self.fatal (filename, 'could not parse variation list') + if line == '\n': + break + self.known_variations.add (line.strip()) + num_variations += 1 + return num_variations + + # Parse from the first line after 'Running target ...' to the end + # of the run's summary. + def parse_run (self, filename, file, tool, variation, num_variations): + header = None + harness = None + segment = None + final_using = 0 + + # If this is the first run for this variation, add any text before + # the first harness to the header. + if not variation.header: + segment = Segment (filename, file.tell()) + variation.header = segment + + # Parse the rest of the summary (the '# of ' lines). + if len (variation.counts) == 0: + variation.counts = self.zero_counts() + + # Parse up until the first line of the summary. + if num_variations == 1: + end = '\t\t=== ' + tool.name + ' Summary ===\n' + else: + end = ('\t\t=== ' + tool.name + ' Summary for ' + + variation.name + ' ===\n') + while True: + line = file.readline() + if line == '': + self.fatal (filename, 'no recognised summary line') + if line == end: + break + + # Look for the start of a new harness. + if line.startswith ('Running ') and line.endswith (' ...\n'): + # Close off the current harness segment, if any. + if harness: + segment.lines -= final_using + harness.add_segment (first_key, segment) + name = line[len ('Running '):-len(' ...\n')] + harness = variation.get_harness (name) + segment = Segment (filename, file.tell()) + first_key = None + final_using = 0 + continue + + # Record test results. Associate the first test result with + # the harness segment, so that if a run for a particular harness + # has been split up, we can reassemble the individual segments + # in a sensible order. + # + # dejagnu sometimes issues warnings about the testing environment + # before running any tests. Treat them as part of the header + # rather than as a test result. + match = self.result_re.match (line) + if match and (harness or not line.startswith ('WARNING:')): + if not harness: + self.fatal (filename, 'saw test result before harness name') + name = match.group (2) + # Ugly hack to get the right order for gfortran. + if name.startswith ('gfortran.dg/g77/'): + name = 'h' + name + key = (name, len (harness.results)) + harness.results.append ((key, line)) + if not first_key and sort_logs: + first_key = key + if line.startswith ('ERROR: (DejaGnu)'): + for i in range (len (self.count_names)): + if 'DejaGnu errors' in self.count_names[i]: + variation.counts[i] += 1 + break + + # 'Using ...' lines are only interesting in a header. Splitting + # the test up into parallel runs leads to more 'Using ...' lines + # than there would be in a single log. + if line.startswith ('Using '): + final_using += 1 + else: + final_using = 0 + + # Add other text to the current segment, if any. + if segment: + segment.lines += 1 + + # Close off the final harness segment, if any. + if harness: + segment.lines -= final_using + harness.add_segment (first_key, segment) + + while True: + before = file.tell() + line = file.readline() + if line == '': + break + if line == '\n': + continue + if not line.startswith ('# '): + file.seek (before) + break + found = False + for i in range (len (self.count_names)): + if line.startswith (self.count_names[i]): + count = line[len (self.count_names[i]):-1].strip() + variation.counts[i] += self.parse_int (filename, count) + found = True + break + if not found: + self.fatal (filename, 'unknown test result: ' + line[:-1]) + + # Parse an acats run, which uses a different format from dejagnu. + # We have just skipped over '=== acats configuration ==='. + def parse_acats_run (self, filename, file): + # Parse the preamble, which describes the configuration and logs + # the creation of support files. + record = (self.acats_premable == '') + if record: + self.acats_premable = '\t\t=== acats configuration ===\n' + while True: + line = file.readline() + if line == '': + self.fatal (filename, 'could not parse acats preamble') + if line == '\t\t=== acats tests ===\n': + break + if record: + self.acats_premable += line + + # Parse the test results themselves, using a dummy variation name. + tool = self.get_tool ('acats') + variation = tool.get_variation ('none') + self.parse_run (filename, file, tool, variation, 1) + + # Parse the failure list. + while True: + before = file.tell() + line = file.readline() + if line.startswith ('*** FAILURES: '): + self.acats_failures.append (line[len ('*** FAILURES: '):-1]) + continue + file.seek (before) + break + + # Parse the final summary at the end of a log in order to capture + # the version output that follows it. + def parse_final_summary (self, filename, file): + record = (self.version_output == '') + while True: + line = file.readline() + if line == '': + break + if line.startswith ('# of '): + continue + if record: + self.version_output += line + if line == '\n': + break + + # Parse a .log or .sum file. + def parse_file (self, filename, file): + tool = None + target = None + num_variations = 1 + while True: + line = file.readline() + if line == '': + return + + # Parse the list of variations, which comes before the test + # runs themselves. + if line.startswith ('Schedule of variations:'): + num_variations = self.parse_variations (filename, file) + continue + + # Parse a testsuite run for one tool/variation combination. + if line.startswith ('Running target '): + name = line[len ('Running target '):-1] + if not tool: + self.fatal (filename, 'could not parse tool name') + if name not in self.known_variations: + self.fatal (filename, 'unknown target: ' + name) + self.parse_run (filename, file, tool, + tool.get_variation (name), + num_variations) + # If there is only one variation then there is no separate + # summary for it. Record any following version output. + if num_variations == 1: + self.parse_final_summary (filename, file) + continue + + # Parse the start line. In the case where several files are being + # parsed, pick the one with the earliest time. + match = self.test_run_re.match (line) + if match: + time = self.parse_time (match.group (2)) + if not self.start_line or self.start_line[0] > time: + self.start_line = (time, line) + continue + + # Parse the form used for native testing. + if line.startswith ('Native configuration is '): + self.native_line = line + continue + + # Parse the target triplet. + if line.startswith ('Target is '): + self.target_line = line + continue + + # Parse the host triplet. + if line.startswith ('Host is '): + self.host_line = line + continue + + # Parse the acats premable. + if line == '\t\t=== acats configuration ===\n': + self.parse_acats_run (filename, file) + continue + + # Parse the tool name. + match = self.tool_re.match (line) + if match: + tool = self.get_tool (match.group (1)) + continue + + # Skip over the final summary (which we instead create from + # individual runs) and parse the version output. + if tool and line == '\t\t=== ' + tool.name + ' Summary ===\n': + if file.readline() != '\n': + self.fatal (filename, 'expected blank line after summary') + self.parse_final_summary (filename, file) + continue + + # Parse the completion line. In the case where several files + # are being parsed, pick the one with the latest time. + match = self.completed_re.match (line) + if match: + time = self.parse_time (match.group (1)) + if not self.end_line or self.end_line[0] < time: + self.end_line = (time, line) + continue + + # Sanity check to make sure that important text doesn't get + # dropped accidentally. + if strict and line.strip() != '': + self.fatal (filename, 'unrecognised line: ' + line[:-1]) + + # Output a segment of text. + def output_segment (self, segment): + with safe_open (segment.filename) as file: + file.seek (segment.start) + for i in range (segment.lines): + sys.stdout.write (file.readline()) + + # Output a summary giving the number of times each type of result has + # been seen. + def output_summary (self, tool, counts): + for i in range (len (self.count_names)): + name = self.count_names[i] + # dejagnu only prints result types that were seen at least once, + # but acats always prints a number of unexpected failures. + if (counts[i] > 0 + or (tool.name == 'acats' + and name.startswith ('# of unexpected failures'))): + sys.stdout.write ('%s%d\n' % (name, counts[i])) + + # Output unified .log or .sum information for a particular variation, + # with a summary at the end. + def output_variation (self, tool, variation): + self.output_segment (variation.header) + for harness in sorted (variation.harnesses.values(), + key = attrgetter ('name')): + sys.stdout.write ('Running ' + harness.name + ' ...\n') + if self.do_sum: + harness.results.sort() + for (key, line) in harness.results: + sys.stdout.write (line) + else: + # Rearrange the log segments into test order (but without + # rearranging text within those segments). + for key in sorted (harness.segments.keys()): + self.output_segment (harness.segments[key]) + for segment in harness.empty: + self.output_segment (segment) + if len (self.variations) > 1: + sys.stdout.write ('\t\t=== ' + tool.name + ' Summary for ' + + variation.name + ' ===\n\n') + self.output_summary (tool, variation.counts) + + # Output unified .log or .sum information for a particular tool, + # with a summary at the end. + def output_tool (self, tool): + counts = self.zero_counts() + if tool.name == 'acats': + # acats doesn't use variations, so just output everything. + # It also has a different approach to whitespace. + sys.stdout.write ('\t\t=== ' + tool.name + ' tests ===\n') + for variation in tool.variations.values(): + self.output_variation (tool, variation) + self.accumulate_counts (counts, variation.counts) + sys.stdout.write ('\t\t=== ' + tool.name + ' Summary ===\n') + else: + # Output the results in the usual dejagnu runtest format. + sys.stdout.write ('\n\t\t=== ' + tool.name + ' tests ===\n\n' + 'Schedule of variations:\n') + for name in self.variations: + if name in tool.variations: + sys.stdout.write (' ' + name + '\n') + sys.stdout.write ('\n') + for name in self.variations: + if name in tool.variations: + variation = tool.variations[name] + sys.stdout.write ('Running target ' + + variation.name + '\n') + self.output_variation (tool, variation) + self.accumulate_counts (counts, variation.counts) + sys.stdout.write ('\n\t\t=== ' + tool.name + ' Summary ===\n\n') + self.output_summary (tool, counts) + + def main (self): + self.parse_cmdline() + try: + # Parse the input files. + for filename in self.files: + with safe_open (filename) as file: + self.parse_file (filename, file) + + # Decide what to output. + if len (self.variations) == 0: + self.variations = sorted (self.known_variations) + else: + for name in self.variations: + if name not in self.known_variations: + self.fatal (None, 'no results for ' + name) + if len (self.tools) == 0: + self.tools = sorted (self.runs.keys()) + + # Output the header. + if self.start_line: + sys.stdout.write (self.start_line[1]) + sys.stdout.write (self.native_line) + sys.stdout.write (self.target_line) + sys.stdout.write (self.host_line) + sys.stdout.write (self.acats_premable) + + # Output the main body. + for name in self.tools: + if name not in self.runs: + self.fatal (None, 'no results for ' + name) + self.output_tool (self.runs[name]) + + # Output the footer. + if len (self.acats_failures) > 0: + sys.stdout.write ('*** FAILURES: ' + + ' '.join (self.acats_failures) + '\n') + sys.stdout.write (self.version_output) + if self.end_line: + sys.stdout.write (self.end_line[1]) + except IOError as e: + self.fatal (e.filename, e.strerror) + +Prog().main() diff --git a/contrib/dg-extract-results.sh b/contrib/dg-extract-results.sh new file mode 100755 index 0000000..6ee3d26 --- /dev/null +++ b/contrib/dg-extract-results.sh @@ -0,0 +1,459 @@ +#! /bin/sh + +# For a specified tool and optional list of test variants, extract +# test results from one or more test summary (.sum) files and combine +# the results into a new test summary file, sent to the standard output. +# The resulting file can be used with test result comparison scripts for +# results from tests that were run in parallel. See usage() below. + +# Copyright (C) 2008, 2009, 2010, 2012 Free Software Foundation +# Contributed by Janis Johnson +# +# This file is part of GCC. +# +# GCC is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3, or (at your option) +# any later version. +# +# GCC is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GCC; see the file COPYING. If not, write to +# the Free Software Foundation, 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301, USA. + +PROGNAME=dg-extract-results.sh + +# Try to use the python version if possible, since it tends to be faster. +PYTHON_VER=`echo "$0" | sed 's/sh$/py/'` +if test "$PYTHON_VER" != "$0" && + test -f "$PYTHON_VER" && + python -c 'import sys, getopt, re, io, datetime, operator; sys.exit (0 if sys.version_info >= (2, 6) else 1)' \ + > /dev/null 2> /dev/null; then + exec python $PYTHON_VER "$@" +fi + +usage() { + cat <&2 +Usage: $PROGNAME [-t tool] [-l variant-list] [-L] sum-file ... + + tool The tool (e.g. g++, libffi) for which to create a + new test summary file. If not specified then all + specified sum files must be for the same tool. + variant-list One or more test variant names. If the list is + not specified then one is constructed from all + variants in the files for . + sum-file A test summary file with the format of those + created by runtest from DejaGnu. + If -L is used, merge *.log files instead of *.sum. In this + mode the exact order of lines may not be preserved, just different + Running *.exp chunks should be in correct order. +EOF +} + +# Write a message to the standard error. + +msg() { + echo "$@" >&2 +} + +# Parse the command-line options. + +VARIANTS="" +TOOL="" +MODE="sum" + +while getopts "l:t:L" ARG; do + case $ARG in + l) VARIANTS="${VARIANTS} ${OPTARG}";; + t) test -z "$TOOL" || (msg "${PROGNAME}: only one tool can be specified"; exit 1); + TOOL="${OPTARG}";; + L) MODE="log";; + \?) usage; exit 0;; + esac +done +shift `expr ${OPTIND} - 1` + +if test $# -lt 1 ; then + usage + exit 1 +fi + +TMPDIR=${TMPDIR-/tmp} +SUM_FILES="$@" +FIRST_SUM=$1 +TMP= +trap 'EXIT_STATUS=$?; rm -rf $TMP && exit $EXIT_STATUS' 0 +# Create a (secure) tmp directory for tmp files. +{ + TMP=`(umask 077 && mktemp -d -q "${TMPDIR}/dg-combine-results-$$-XXXXXX") 2>/dev/null` && + test -n "$TMP" && test -d "$TMP" +} || +{ + TMP=${TMPDIR}/dg-combine-results-$$-$RANDOM + (umask 077 && mkdir $TMP) +} || +{ + msg "${PROGNAME}: cannot create a temporary directory" + { (exit 1); exit 1; } +} + +# Find a good awk. + +if test -z "$AWK" ; then + for AWK in gawk nawk awk + do + if type $AWK 2>&1 | grep 'not found' > /dev/null 2>&1 ; then + : + else + break + fi + done +fi + +# Verify that the specified summary files exist. + +ERROR=0 +for FILE in $SUM_FILES +do + if ! test -f $FILE ; then + msg "${PROGNAME}: file $FILE does not exist." + ERROR=1 + fi +done +test $ERROR -eq 0 || exit 1 + +# Test if grep supports the '--text' option + +GREP=grep + +if echo -e '\x00foo\x00' | $GREP --text foo > /dev/null 2>&1 ; then + GREP="grep --text" +else + # Our grep does not recognize the '--text' option. We have to + # treat our files in order to remove any non-printable character. + for file in $SUM_FILES ; do + mv $file ${file}.orig + cat -v ${file}.orig > $file + done +fi + +if [ -z "$TOOL" ]; then + # If no tool was specified, all specified summary files must be for + # the same tool. + + CNT=`$GREP '=== .* tests ===' $SUM_FILES | $AWK '{ print $3 }' | sort -u | wc -l` + if [ $CNT -eq 1 ]; then + TOOL=`$GREP '=== .* tests ===' $FIRST_SUM | $AWK '{ print $2 }'` + else + msg "${PROGNAME}: sum files are for multiple tools, specify a tool" + msg "" + usage + exit 1 + fi +else + # Ignore the specified summary files that are not for this tool. This + # should keep the relevant files in the same order. + + SUM_FILES=`$GREP -l "=== $TOOL" $SUM_FILES` + if test -z "$SUM_FILES" ; then + msg "${PROGNAME}: none of the specified files are results for $TOOL" + exit 1 + fi +fi + +if [ "$TOOL" = acats ]; then + # Acats *.sum or *.log files aren't dejagnu generated, and they have + # somewhat different format. + ACATS_AWK=${TMP}/acats.awk + cat < $ACATS_AWK +BEGIN { + print_prologue=1; curfile=""; insummary=0 + passcnt=0; failcnt=0; unsupcnt=0; failures="" +} +/^[ \t]*=== acats configuration ===/ { + insummary=0 + if (print_prologue) print + next +} +/^[ \t]*=== acats tests ===/ { + if (print_prologue) print + print_prologue=0 + next +} +/^Running chapter / { + if (curfile) close (curfile) + curfile="${TMP}/chapter-"\$3 + print >> curfile + next +} +/^[ \t]*=== acats Summary ===/ { + if (curfile) close (curfile) + curfile="" + insummary=1 + next +} +/^# of expected passes/ { if (insummary == 1) passcnt += \$5; next; } +/^# of unexpected failures/ { if (insummary == 1) failcnt += \$5; next; } +/^# of unsupported tests/ { if (insummary == 1) unsupcnt += \$5; next; } +/^\*\*\* FAILURES: / { + if (insummary == 1) { + if (failures) sub(/^\*\*\* FAILURES:/,"") + failures=failures""\$0 + } +} +{ + if (print_prologue) { print; next } + if (curfile) print >> curfile +} +END { + system ("cat ${TMP}/chapter-*") + print " === acats Summary ===" + print "# of expected passes " passcnt + print "# of unexpected failures " failcnt + if (unsupcnt) print "# of unsupported tests " unsupcnt + if (failures) print failures +} +EOF + + rm -f ${TMP}/chapter-* + $AWK -f $ACATS_AWK $SUM_FILES + exit 0 +fi + +# If no variants were specified, find all variants in the remaining +# summary files. Otherwise, ignore specified variants that aren't in +# any of those summary files. + +if test -z "$VARIANTS" ; then + VAR_AWK=${TMP}/variants.awk + cat < $VAR_AWK +/^Schedule of variations:/ { in_vars=1; next } +/^$/ { in_vars=0 } +/^Running target/ { exit } +{ if (in_vars==1) print \$1; else next } +EOF + + touch ${TMP}/varlist + for FILE in $SUM_FILES; do + $AWK -f $VAR_AWK $FILE >> ${TMP}/varlist + done + VARIANTS="`sort -u ${TMP}/varlist`" +else + VARS="$VARIANTS" + VARIANTS="" + for VAR in $VARS + do + $GREP "Running target $VAR" $SUM_FILES > /dev/null && VARIANTS="$VARIANTS $VAR" + done +fi + +# Find out if we have more than one variant, or any at all. + +VARIANT_COUNT=0 +for VAR in $VARIANTS +do + VARIANT_COUNT=`expr $VARIANT_COUNT + 1` +done + +if test $VARIANT_COUNT -eq 0 ; then + msg "${PROGNAME}: no file for $TOOL has results for the specified variants" + exit 1 +fi + +cat $SUM_FILES \ + | $AWK '/^Running/ { if ($2 != "target" && $3 == "...") print "EXPFILE: "$2 } ' \ + | sort -u > ${TMP}/expfiles + +# Write the begining of the combined summary file. + +head -n 2 $FIRST_SUM +echo +echo " === $TOOL tests ===" +echo +echo "Schedule of variations:" +for VAR in $VARIANTS +do + echo " $VAR" +done +echo + +# For each test variant for the tool, copy test reports from each of the +# summary files. Set up two awk scripts from within the loop to +# initialize VAR and TOOL with the script, rather than assuming that the +# available version of awk can pass variables from the command line. + +for VAR in $VARIANTS +do + GUTS_AWK=${TMP}/guts.awk + cat << EOF > $GUTS_AWK +BEGIN { + variant="$VAR" + firstvar=1 + expfileno=1 + cnt=0 + print_using=0 + need_close=0 +} +/^EXPFILE: / { + expfiles[expfileno] = \$2 + expfilesr[\$2] = expfileno + expfileno = expfileno + 1 +} +/^Running target / { + curvar = \$3 + if (variant == curvar && firstvar == 1) { print; print_using=1; firstvar = 0 } + next +} +/^Using / { + if (variant == curvar && print_using) { print; next } +} +/^Running .*\\.exp \\.\\.\\./ { + print_using=0 + if (variant == curvar) { + if (need_close) close(curfile) + curfile="${TMP}/list"expfilesr[\$2] + expfileseen[\$2]=expfileseen[\$2] + 1 + need_close=0 + testname="00" + next + } +} +/^\t\t=== .* ===$/ { curvar = ""; next } +/^(PASS|XPASS|FAIL|XFAIL|UNRESOLVED|WARNING|ERROR|UNSUPPORTED|UNTESTED|KFAIL):/ { + testname=\$2 + # Ugly hack for gfortran.dg/dg.exp + if ("$TOOL" == "gfortran" && testname ~ /^gfortran.dg\/g77\//) + testname="h"testname +} +/^$/ { if ("$MODE" == "sum") next } +{ if (variant == curvar && curfile) { + if ("$MODE" == "sum") { + printf "%s %08d|", testname, cnt >> curfile + cnt = cnt + 1 + } + filewritten[curfile]=1 + need_close=1 + print >> curfile + } else + next +} +END { + n=1 + while (n < expfileno) { + if (expfileseen[expfiles[n]]) { + print "Running "expfiles[n]" ..." + if (filewritten["${TMP}/list"n]) { + if (expfileseen[expfiles[n]] == 1) + cmd="cat" + else + cmd="LC_ALL=C sort" + if ("$MODE" == "sum") + system (cmd" ${TMP}/list"n" | sed -n 's/^[^ ]* [^ |]*|//p'") + else + system ("cat ${TMP}/list"n) + } + } + n = n + 1 + } +} +EOF + + SUMS_AWK=${TMP}/sums.awk + rm -f $SUMS_AWK + cat << EOF > $SUMS_AWK +BEGIN { + variant="$VAR" + tool="$TOOL" + passcnt=0; failcnt=0; untstcnt=0; xpasscnt=0; xfailcnt=0; kpasscnt=0; kfailcnt=0; unsupcnt=0; unrescnt=0; dgerrorcnt=0; + curvar=""; insummary=0 +} +/^Running target / { curvar = \$3; next } +/^ERROR: \(DejaGnu\)/ { if (variant == curvar) dgerrorcnt += 1 } +/^# of / { if (variant == curvar) insummary = 1 } +/^# of expected passes/ { if (insummary == 1) passcnt += \$5; next; } +/^# of unexpected successes/ { if (insummary == 1) xpasscnt += \$5; next; } +/^# of unexpected failures/ { if (insummary == 1) failcnt += \$5; next; } +/^# of expected failures/ { if (insummary == 1) xfailcnt += \$5; next; } +/^# of unknown successes/ { if (insummary == 1) kpasscnt += \$5; next; } +/^# of known failures/ { if (insummary == 1) kfailcnt += \$5; next; } +/^# of untested testcases/ { if (insummary == 1) untstcnt += \$5; next; } +/^# of unresolved testcases/ { if (insummary == 1) unrescnt += \$5; next; } +/^# of unsupported tests/ { if (insummary == 1) unsupcnt += \$5; next; } +/^$/ { if (insummary == 1) + { insummary = 0; curvar = "" } + next + } +{ next } +END { + printf ("\t\t=== %s Summary for %s ===\n\n", tool, variant) + if (dgerrorcnt != 0) printf ("# of DejaGnu errors\t\t%d\n", dgerrorcnt) + if (passcnt != 0) printf ("# of expected passes\t\t%d\n", passcnt) + if (failcnt != 0) printf ("# of unexpected failures\t%d\n", failcnt) + if (xpasscnt != 0) printf ("# of unexpected successes\t%d\n", xpasscnt) + if (xfailcnt != 0) printf ("# of expected failures\t\t%d\n", xfailcnt) + if (kpasscnt != 0) printf ("# of unknown successes\t\t%d\n", kpasscnt) + if (kfailcnt != 0) printf ("# of known failures\t\t%d\n", kfailcnt) + if (untstcnt != 0) printf ("# of untested testcases\t\t%d\n", untstcnt) + if (unrescnt != 0) printf ("# of unresolved testcases\t%d\n", unrescnt) + if (unsupcnt != 0) printf ("# of unsupported tests\t\t%d\n", unsupcnt) +} +EOF + + PVAR=`echo $VAR | sed 's,/,.,g'` + TMPFILE=${TMP}/var-$PVAR + rm -f $TMPFILE + rm -f ${TMP}/list* + cat ${TMP}/expfiles $SUM_FILES | $AWK -f $GUTS_AWK + cat $SUM_FILES | $AWK -f $SUMS_AWK > $TMPFILE + # If there are multiple variants, output the counts for this one; + # otherwise there will just be the final counts at the end. + test $VARIANT_COUNT -eq 1 || cat $TMPFILE +done + +# Set up an awk script to get the combined summary counts for the tool. + +TOTAL_AWK=${TMP}/total.awk +cat << EOF > $TOTAL_AWK +BEGIN { + tool="$TOOL" + passcnt=0; failcnt=0; untstcnt=0; xpasscnt=0; xfailcnt=0; kfailcnt=0; unsupcnt=0; unrescnt=0; dgerrorcnt=0 +} +/^# of DejaGnu errors/ { dgerrorcnt += \$5 } +/^# of expected passes/ { passcnt += \$5 } +/^# of unexpected failures/ { failcnt += \$5 } +/^# of unexpected successes/ { xpasscnt += \$5 } +/^# of expected failures/ { xfailcnt += \$5 } +/^# of unknown successes/ { kpasscnt += \$5 } +/^# of known failures/ { kfailcnt += \$5 } +/^# of untested testcases/ { untstcnt += \$5 } +/^# of unresolved testcases/ { unrescnt += \$5 } +/^# of unsupported tests/ { unsupcnt += \$5 } +END { + printf ("\n\t\t=== %s Summary ===\n\n", tool) + if (dgerrorcnt != 0) printf ("# of DejaGnu errors\t\t%d\n", dgerrorcnt) + if (passcnt != 0) printf ("# of expected passes\t\t%d\n", passcnt) + if (failcnt != 0) printf ("# of unexpected failures\t%d\n", failcnt) + if (xpasscnt != 0) printf ("# of unexpected successes\t%d\n", xpasscnt) + if (xfailcnt != 0) printf ("# of expected failures\t\t%d\n", xfailcnt) + if (kpasscnt != 0) printf ("# of unknown successes\t\t%d\n", kpasscnt) + if (kfailcnt != 0) printf ("# of known failures\t\t%d\n", kfailcnt) + if (untstcnt != 0) printf ("# of untested testcases\t\t%d\n", untstcnt) + if (unrescnt != 0) printf ("# of unresolved testcases\t%d\n", unrescnt) + if (unsupcnt != 0) printf ("# of unsupported tests\t\t%d\n", unsupcnt) +} +EOF + +# Find the total summaries for the tool and add to the end of the output. +cat ${TMP}/var-* | $AWK -f $TOTAL_AWK + +# This is ugly, but if there's version output from the compiler under test +# at the end of the file, we want it. The other thing that might be there +# is the final summary counts. +tail -2 $FIRST_SUM | $GREP '^#' > /dev/null || tail -2 $FIRST_SUM + +exit 0 -- cgit v1.1