From 749a928d88730e52c978414542697f976a072666 Mon Sep 17 00:00:00 2001 From: Pedro Alves Date: Sat, 12 Nov 2016 00:17:14 +0000 Subject: Fix PR18360 - internal error when using "interrupt -a" v2: - add handle_stop_requested and use it in all event waitkinds. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ If you do "interrupt -a" just while some thread is stepping over a breakpoint, gdb trips on an internal error. The test added by this patch manages to trigger this consistently by spawning a few threads that are constantly tripping on a conditional breakpoint whose condition always evaluates to false. With current gdb, you get: ~~~ interrupt -a .../src/gdb/inline-frame.c:343: internal-error: void skip_inline_frames(ptid_t): Assertion `find_inline_frame_state (ptid) == NULL' failed. A problem internal to GDB has been detected, further debugging may prove unreliable. Quit this debugging session? (y or n) FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=on: iter=0: interrupt -a (GDB internal error) [...] .../src/gdb/inline-frame.c:343: internal-error: void skip_inline_frames(ptid_t): Assertion `find_inline_frame_state (ptid) == NULL' failed. A problem internal to GDB has been detected, further debugging may prove unreliable. Quit this debugging session? (y or n) FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=0: wait for stops (GDB internal error) ~~~ The assertion triggers because we're processing a stop for a thread that had already stopped before and thus had already its inline-frame state filled in. Calling handle_inferior_event_1 directly within a "thread_stop_requested" observer is something that I've wanted to get rid of before, for being fragile. Nowadays, infrun is aware of threads with pending events, so we can use that instead, and let the normal fetch_inferior_event -> handle_inferior_event code path handle the forced stop. The change to finish_step_over is necessary because sometimes a thread that was told to PTRACE_SINGLESTEP reports back a SIGSTOP instead of a SIGTRAP (i.e., we tell it to single-step, and then interrupt it quick enough that on the kernel side the thread dequeues the SIGTOP before ever having had a chance of executing the instruction to be stepped). SIGSTOP gets translated to a GDB_SIGNAL_0. And then finish_step_over would miss calling clear_step_over_info, and thus miss restarting the other threads (which in this case of threads with pending events, means setting their "resumed" flag, so their pending events can be consumed). And now that we always restart threads in finish_step_over, we no longer need to do that in handle_signal_stop. Tested on x86_64 Fedora 23, native and gdbserver. gdb/ChangeLog: yyyy-mm-dd Pedro Alves PR gdb/18360 * infrun.c (start_step_over, do_target_resume, resume) (restart_threads): Assert we're not resuming a thread that is meant to be stopped. (infrun_thread_stop_requested_callback): Delete. (infrun_thread_stop_requested): If the thread is internally stopped, queue a pending stop event and clear the thread's inline-frame state. (handle_syscall_event, handle_inferior_event_1): Use handle_stop_requested. (handle_stop_requested): New function. (handle_signal_stop): Set the thread's stop_signal here instead of at caller. (finish_step_over): Clear step over info unconditionally. (handle_signal_stop): If the user had interrupted the event thread, consider the stop a random signal. (handle_signal_stop): Don't restart threads here. (stop_waiting): Don't clear step-over info here. gdb/testsuite/ChangeLog: yyyy-mm-dd Pedro Alves PR gdb/18360 * gdb.threads/interrupt-while-step-over.c: New file. * gdb.threads/interrupt-while-step-over.exp: New file. --- gdb/infrun.c | 198 ++++++++++---------- .../gdb.threads/interrupt-while-step-over.c | 75 ++++++++ .../gdb.threads/interrupt-while-step-over.exp | 202 +++++++++++++++++++++ .../signal-while-stepping-over-bp-other-thread.exp | 1 - 4 files changed, 381 insertions(+), 95 deletions(-) create mode 100644 gdb/testsuite/gdb.threads/interrupt-while-step-over.c create mode 100644 gdb/testsuite/gdb.threads/interrupt-while-step-over.exp diff --git a/gdb/infrun.c b/gdb/infrun.c index bf0632e..87b358f 100644 --- a/gdb/infrun.c +++ b/gdb/infrun.c @@ -2081,6 +2081,8 @@ start_step_over (void) step_over_what step_what; int must_be_in_line; + gdb_assert (!tp->stop_requested); + next = thread_step_over_chain_next (tp); /* If this inferior already has a displaced step in process, @@ -2329,6 +2331,8 @@ do_target_resume (ptid_t resume_ptid, int step, enum gdb_signal sig) { struct thread_info *tp = inferior_thread (); + gdb_assert (!tp->stop_requested); + /* Install inferior's terminal modes. */ target_terminal_inferior (); @@ -2393,6 +2397,7 @@ resume (enum gdb_signal sig) single-step). */ int step; + gdb_assert (!tp->stop_requested); gdb_assert (!thread_is_in_step_over_chain (tp)); QUIT; @@ -3274,65 +3279,6 @@ static void keep_going (struct execution_control_state *ecs); static void process_event_stop_test (struct execution_control_state *ecs); static int switch_back_to_stepped_thread (struct execution_control_state *ecs); -/* Callback for iterate over threads. If the thread is stopped, but - the user/frontend doesn't know about that yet, go through - normal_stop, as if the thread had just stopped now. ARG points at - a ptid. If PTID is MINUS_ONE_PTID, applies to all threads. If - ptid_is_pid(PTID) is true, applies to all threads of the process - pointed at by PTID. Otherwise, apply only to the thread pointed by - PTID. */ - -static int -infrun_thread_stop_requested_callback (struct thread_info *info, void *arg) -{ - ptid_t ptid = * (ptid_t *) arg; - - if ((ptid_equal (info->ptid, ptid) - || ptid_equal (minus_one_ptid, ptid) - || (ptid_is_pid (ptid) - && ptid_get_pid (ptid) == ptid_get_pid (info->ptid))) - && is_running (info->ptid) - && !is_executing (info->ptid)) - { - struct cleanup *old_chain; - struct execution_control_state ecss; - struct execution_control_state *ecs = &ecss; - - memset (ecs, 0, sizeof (*ecs)); - - old_chain = make_cleanup_restore_current_thread (); - - overlay_cache_invalid = 1; - /* Flush target cache before starting to handle each event. - Target was running and cache could be stale. This is just a - heuristic. Running threads may modify target memory, but we - don't get any event. */ - target_dcache_invalidate (); - - /* Go through handle_inferior_event/normal_stop, so we always - have consistent output as if the stop event had been - reported. */ - ecs->ptid = info->ptid; - ecs->event_thread = info; - ecs->ws.kind = TARGET_WAITKIND_STOPPED; - ecs->ws.value.sig = GDB_SIGNAL_0; - - handle_inferior_event (ecs); - - if (!ecs->wait_some_more) - { - /* Cancel any running execution command. */ - thread_cancel_execution_command (info); - - normal_stop (); - } - - do_cleanups (old_chain); - } - - return 0; -} - /* This function is attached as a "thread_stop_requested" observer. Cleanup local state that assumed the PTID was to be resumed, and report the stop to the frontend. */ @@ -3342,17 +3288,51 @@ infrun_thread_stop_requested (ptid_t ptid) { struct thread_info *tp; - /* PTID was requested to stop. Remove matching threads from the - step-over queue, so we don't try to resume them - automatically. */ + /* PTID was requested to stop. If the thread was already stopped, + but the user/frontend doesn't know about that yet (e.g., the + thread had been temporarily paused for some step-over), set up + for reporting the stop now. */ ALL_NON_EXITED_THREADS (tp) if (ptid_match (tp->ptid, ptid)) { + if (tp->state != THREAD_RUNNING) + continue; + if (tp->executing) + continue; + + /* Remove matching threads from the step-over queue, so + start_step_over doesn't try to resume them + automatically. */ if (thread_is_in_step_over_chain (tp)) thread_step_over_chain_remove (tp); - } - iterate_over_threads (infrun_thread_stop_requested_callback, &ptid); + /* If the thread is stopped, but the user/frontend doesn't + know about that yet, queue a pending event, as if the + thread had just stopped now. Unless the thread already had + a pending event. */ + if (!tp->suspend.waitstatus_pending_p) + { + tp->suspend.waitstatus_pending_p = 1; + tp->suspend.waitstatus.kind = TARGET_WAITKIND_STOPPED; + tp->suspend.waitstatus.value.sig = GDB_SIGNAL_0; + } + + /* Clear the inline-frame state, since we're re-processing the + stop. */ + clear_inline_frame_state (tp->ptid); + + /* If this thread was paused because some other thread was + doing an inline-step over, let that finish first. Once + that happens, we'll restart all threads and consume pending + stop events then. */ + if (step_over_info_valid_p ()) + continue; + + /* Otherwise we can process the (new) pending event now. Set + it so this pending event is considered by + do_target_wait. */ + tp->resumed = 1; + } } static void @@ -4254,6 +4234,8 @@ stepped_in_from (struct frame_info *frame, struct frame_id step_frame_id) return 0; } +static int handle_stop_requested (struct execution_control_state *ecs); + /* Auxiliary function that handles syscall entry/return events. It returns 1 if the inferior should keep going (and GDB should ignore the event), or 0 if the event deserves to be @@ -4283,6 +4265,9 @@ handle_syscall_event (struct execution_control_state *ecs) = bpstat_stop_status (get_regcache_aspace (regcache), stop_pc, ecs->ptid, &ecs->ws); + if (handle_stop_requested (ecs)) + return 0; + if (bpstat_causes_stop (ecs->event_thread->control.stop_bpstat)) { /* Catchpoint hit. */ @@ -4290,6 +4275,9 @@ handle_syscall_event (struct execution_control_state *ecs) } } + if (handle_stop_requested (ecs)) + return 0; + /* If no catchpoint triggered for this, then keep going. */ keep_going (ecs); return 1; @@ -4980,6 +4968,9 @@ handle_inferior_event_1 (struct execution_control_state *ecs) = bpstat_stop_status (get_regcache_aspace (regcache), stop_pc, ecs->ptid, &ecs->ws); + if (handle_stop_requested (ecs)) + return; + if (bpstat_causes_stop (ecs->event_thread->control.stop_bpstat)) { /* A catchpoint triggered. */ @@ -5034,6 +5025,8 @@ handle_inferior_event_1 (struct execution_control_state *ecs) case TARGET_WAITKIND_SPURIOUS: if (debug_infrun) fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SPURIOUS\n"); + if (handle_stop_requested (ecs)) + return; if (!ptid_equal (ecs->ptid, inferior_ptid)) context_switch (ecs->ptid); resume (GDB_SIGNAL_0); @@ -5043,6 +5036,8 @@ handle_inferior_event_1 (struct execution_control_state *ecs) case TARGET_WAITKIND_THREAD_CREATED: if (debug_infrun) fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_THREAD_CREATED\n"); + if (handle_stop_requested (ecs)) + return; if (!ptid_equal (ecs->ptid, inferior_ptid)) context_switch (ecs->ptid); if (!switch_back_to_stepped_thread (ecs)) @@ -5227,6 +5222,9 @@ Cannot fill $_exitsignal with the correct signal number.\n")); = bpstat_stop_status (get_regcache_aspace (get_current_regcache ()), stop_pc, ecs->ptid, &ecs->ws); + if (handle_stop_requested (ecs)) + return; + /* If no catchpoint triggered for this, then keep going. Note that we're interested in knowing the bpstat actually causes a stop, not just if it may explain the signal. Software @@ -5301,6 +5299,10 @@ Cannot fill $_exitsignal with the correct signal number.\n")); current_inferior ()->waiting_for_vfork_done = 0; current_inferior ()->pspace->breakpoints_not_allowed = 0; + + if (handle_stop_requested (ecs)) + return; + /* This also takes care of reinserting breakpoints in the previously locked inferior. */ keep_going (ecs); @@ -5337,6 +5339,9 @@ Cannot fill $_exitsignal with the correct signal number.\n")); xfree (ecs->ws.value.execd_pathname); ecs->ws.value.execd_pathname = NULL; + if (handle_stop_requested (ecs)) + return; + /* If no catchpoint triggered for this, then keep going. */ if (!bpstat_causes_stop (ecs->event_thread->control.stop_bpstat)) { @@ -5374,7 +5379,6 @@ Cannot fill $_exitsignal with the correct signal number.\n")); case TARGET_WAITKIND_STOPPED: if (debug_infrun) fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_STOPPED\n"); - ecs->event_thread->suspend.stop_signal = ecs->ws.value.sig; handle_signal_stop (ecs); return; @@ -5391,6 +5395,10 @@ Cannot fill $_exitsignal with the correct signal number.\n")); delete_just_stopped_threads_single_step_breakpoints (); stop_pc = regcache_read_pc (get_thread_regcache (inferior_ptid)); + + if (handle_stop_requested (ecs)) + return; + observer_notify_no_history (); stop_waiting (ecs); return; @@ -5480,6 +5488,8 @@ restart_threads (struct thread_info *event_thread) continue; } + gdb_assert (!tp->stop_requested); + /* If some thread needs to start a step-over at this point, it should still be in the step-over queue, and thus skipped above. */ @@ -5549,8 +5559,7 @@ finish_step_over (struct execution_control_state *ecs) back an event. */ gdb_assert (ecs->event_thread->control.trap_expected); - if (ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP) - clear_step_over_info (); + clear_step_over_info (); } if (!target_is_non_stop_p ()) @@ -5649,6 +5658,23 @@ finish_step_over (struct execution_control_state *ecs) return 0; } +/* If the event thread has the stop requested flag set, pretend it + stopped for a GDB_SIGNAL_0 (i.e., as if it stopped due to + target_stop). */ + +static int +handle_stop_requested (struct execution_control_state *ecs) +{ + if (ecs->event_thread->stop_requested) + { + ecs->ws.kind = TARGET_WAITKIND_STOPPED; + ecs->ws.value.sig = GDB_SIGNAL_0; + handle_signal_stop (ecs); + return 1; + } + return 0; +} + /* Come here when the program has stopped with a signal. */ static void @@ -5662,6 +5688,8 @@ handle_signal_stop (struct execution_control_state *ecs) gdb_assert (ecs->ws.kind == TARGET_WAITKIND_STOPPED); + ecs->event_thread->suspend.stop_signal = ecs->ws.value.sig; + /* Do we need to clean up the state of a thread that has completed a displaced single-step? (Doing so usually affects the PC, so do it here, before we set stop_pc.) */ @@ -6051,6 +6079,15 @@ handle_signal_stop (struct execution_control_state *ecs) if (random_signal) random_signal = !stopped_by_watchpoint; + /* Always stop if the user explicitly requested this thread to + remain stopped. */ + if (ecs->event_thread->stop_requested) + { + random_signal = 1; + if (debug_infrun) + fprintf_unfiltered (gdb_stdlog, "infrun: user-requested stop\n"); + } + /* For the program's own signals, act according to the signal handling tables. */ @@ -6097,8 +6134,6 @@ handle_signal_stop (struct execution_control_state *ecs) && ecs->event_thread->control.trap_expected && ecs->event_thread->control.step_resume_breakpoint == NULL) { - int was_in_line; - /* We were just starting a new sequence, attempting to single-step off of a breakpoint and expecting a SIGTRAP. Instead this signal arrives. This signal will take us out @@ -6114,34 +6149,11 @@ handle_signal_stop (struct execution_control_state *ecs) "infrun: signal arrived while stepping over " "breakpoint\n"); - was_in_line = step_over_info_valid_p (); - clear_step_over_info (); insert_hp_step_resume_breakpoint_at_frame (frame); ecs->event_thread->step_after_step_resume_breakpoint = 1; /* Reset trap_expected to ensure breakpoints are re-inserted. */ ecs->event_thread->control.trap_expected = 0; - if (target_is_non_stop_p ()) - { - /* Either "set non-stop" is "on", or the target is - always in non-stop mode. In this case, we have a bit - more work to do. Resume the current thread, and if - we had paused all threads, restart them while the - signal handler runs. */ - keep_going (ecs); - - if (was_in_line) - { - restart_threads (ecs->event_thread); - } - else if (debug_infrun) - { - fprintf_unfiltered (gdb_stdlog, - "infrun: no need to restart threads\n"); - } - return; - } - /* If we were nexting/stepping some other thread, switch to it, so that we don't continue it, losing control. */ if (!switch_back_to_stepped_thread (ecs)) @@ -7682,8 +7694,6 @@ stop_waiting (struct execution_control_state *ecs) if (debug_infrun) fprintf_unfiltered (gdb_stdlog, "infrun: stop_waiting\n"); - clear_step_over_info (); - /* Let callers know we don't want to wait for the inferior anymore. */ ecs->wait_some_more = 0; diff --git a/gdb/testsuite/gdb.threads/interrupt-while-step-over.c b/gdb/testsuite/gdb.threads/interrupt-while-step-over.c new file mode 100644 index 0000000..eeb81d4 --- /dev/null +++ b/gdb/testsuite/gdb.threads/interrupt-while-step-over.c @@ -0,0 +1,75 @@ +/* This testcase is part of GDB, the GNU debugger. + + Copyright 2016 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . */ + +#include +#include +#include + +#define NUM_THREADS 20 +const int num_threads = NUM_THREADS; + +static pthread_t child_thread[NUM_THREADS]; + +static pthread_barrier_t threads_started_barrier; + +volatile int always_zero; +volatile unsigned int dummy; + +static void +infinite_loop (void) +{ + while (1) + { + dummy++; /* set breakpoint here */ + } +} + +static void * +child_function (void *arg) +{ + pthread_barrier_wait (&threads_started_barrier); + + infinite_loop (); +} + +void +all_started (void) +{ +} + +int +main (void) +{ + int res; + int i; + + alarm (300); + + pthread_barrier_init (&threads_started_barrier, NULL, NUM_THREADS + 1); + + for (i = 0; i < NUM_THREADS; i++) + { + res = pthread_create (&child_thread[i], NULL, child_function, NULL); + } + + /* Wait until all threads have been scheduled. */ + pthread_barrier_wait (&threads_started_barrier); + + all_started (); + + infinite_loop (); +} diff --git a/gdb/testsuite/gdb.threads/interrupt-while-step-over.exp b/gdb/testsuite/gdb.threads/interrupt-while-step-over.exp new file mode 100644 index 0000000..4407eb1 --- /dev/null +++ b/gdb/testsuite/gdb.threads/interrupt-while-step-over.exp @@ -0,0 +1,202 @@ +# Copyright (C) 2016 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# Regression test for PR gdb/18360. Test that "interrupt -a" while +# some thread is stepping over a breakpoint behaves as expected. + +standard_testfile + +if {[prepare_for_testing "failed to prepare" $testfile $srcfile \ + { debug pthreads }] == -1} { + return -1 +} + +# Read the number of threads out of the inferior. +if ![runto_main] { + return -1 +} +set NUM_THREADS [get_integer_valueof "num_threads" -1] + +# Account for the main thread. +incr NUM_THREADS + +# Run command and wait for the prompt, without end anchor. + +proc gdb_test_no_anchor {cmd} { + global gdb_prompt + + gdb_test_multiple $cmd $cmd { + -re "$gdb_prompt " { + pass $cmd + } + -re "infrun:" { + exp_continue + } + } +} + +# Enable/disable debugging. + +proc enable_debug {enable} { + + # Comment out to debug problems with the test. + return + + gdb_test_no_anchor "set debug infrun $enable" + gdb_test_no_anchor "set debug displaced $enable" +} + +# If RESULT is not zero, make the caller return RESULT. + +proc return_if_nonzero { result } { + if {$result != 0} { + return -code return $result + } +} + +# Do one iteration of "c -a& -> interrupt -a". Return zero on sucess, +# and non-zero if some test fails. + +proc test_one_iteration {} { + global gdb_prompt + global NUM_THREADS + global decimal + + set saw_continuing 0 + set test "continue -a &" + return_if_nonzero [gdb_test_multiple $test $test { + -re "Continuing.\r\n" { + set saw_continuing 1 + exp_continue + } + -re "$gdb_prompt " { + if ![gdb_assert $saw_continuing $test] { + return 1 + } + } + -re "infrun:" { + exp_continue + } + }] + + set running_count 0 + set test "all threads are running" + return_if_nonzero [gdb_test_multiple "info threads" $test { + -re "Thread \[^\r\n\]* \\(running\\)" { + incr running_count + exp_continue + } + -re "$gdb_prompt " { + if ![gdb_assert {$running_count == $NUM_THREADS} $test] { + return 1 + } + } + -re "infrun:" { + exp_continue + } + }] + + set test "interrupt -a" + return_if_nonzero [gdb_test_multiple $test $test { + -re "$gdb_prompt " { + pass $test + } + -re "infrun:" { + exp_continue + } + }] + + set stopped_count 0 + set test "wait for stops" + # Don't return on failure here, in order to let "info threads" put + # useful info in gdb.log. + gdb_test_multiple "" $test { + -re "Thread $decimal \[^\r\n\]*stopped" { + incr stopped_count + if {$stopped_count != $NUM_THREADS} { + exp_continue + } + } + -re "$gdb_prompt " { + gdb_assert {$stopped_count == $NUM_THREADS} $test + } + -re "infrun:" { + exp_continue + } + } + + # Check if all threads are seen as stopped with "info + # threads". It's a bit redundant with the test above, but + # it's useful to have this in the gdb.log if the above ever + # happens to fail. + set running_count 0 + set test "all threads are stopped" + return_if_nonzero [gdb_test_multiple "info threads" $test { + -re "Thread \[^\r\n\]* \\(running\\)" { + incr running_count + exp_continue + } + -re "$gdb_prompt " { + if ![gdb_assert {$running_count == 0} $test] { + return 1 + } + } + }] + + return 0 +} + +# The test driver proper. If DISPLACED is "on", turn on displaced +# stepping. If "off", turn it off. + +proc testdriver {displaced} { + global binfile + global GDBFLAGS + + save_vars { GDBFLAGS } { + append GDBFLAGS " -ex \"set non-stop on\"" + clean_restart $binfile + } + + gdb_test_no_output "set displaced-stepping $displaced" + + if ![runto all_started] { + fail "couldn't run to all_started" + return + } + set break_line [gdb_get_line_number "set breakpoint here"] + + gdb_test "break $break_line if always_zero" "Breakpoint .*" "set breakpoint" + + enable_debug 1 + + for {set iter 0} {$iter < 20} {incr iter} { + with_test_prefix "iter=$iter" { + # Return early if some test fails, to avoid cascading + # timeouts if something goes wrong. + if {[test_one_iteration] != 0} { + return + } + } + } +} + +foreach_with_prefix displaced-stepping {"on" "off"} { + if { ${displaced-stepping} != "off" && ![support_displaced_stepping] } { + continue + } + + testdriver ${displaced-stepping} +} diff --git a/gdb/testsuite/gdb.threads/signal-while-stepping-over-bp-other-thread.exp b/gdb/testsuite/gdb.threads/signal-while-stepping-over-bp-other-thread.exp index 9e73015..ef894c2 100644 --- a/gdb/testsuite/gdb.threads/signal-while-stepping-over-bp-other-thread.exp +++ b/gdb/testsuite/gdb.threads/signal-while-stepping-over-bp-other-thread.exp @@ -100,7 +100,6 @@ gdb_test_sequence $test $test { "need to step-over" "resume \\(step=1" "signal arrived while stepping over breakpoint" - "(restart threads|switching back to stepped thread)" "stepped to a different line" "callme" } -- cgit v1.1