From 66d055c75479e0c51745fc3b40faec6df7a01620 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 23 Apr 2021 16:24:27 -0400 Subject: sim: enable hardware support by default Force this on for all ports. We have a few common models that can be used, so make them generally available. If the port doesn't use any hardware (the default), then behavior is unchanged. --- sim/ChangeLog | 4 ++ sim/aarch64/ChangeLog | 4 ++ sim/aarch64/aclocal.m4 | 1 + sim/aarch64/config.in | 6 +++ sim/aarch64/configure | 114 ++++++++++++++++++++++++++++++++++++++-- sim/arm/ChangeLog | 4 ++ sim/arm/aclocal.m4 | 1 + sim/arm/config.in | 6 +++ sim/arm/configure | 114 ++++++++++++++++++++++++++++++++++++++-- sim/avr/ChangeLog | 4 ++ sim/avr/aclocal.m4 | 1 + sim/avr/config.in | 6 +++ sim/avr/configure | 114 ++++++++++++++++++++++++++++++++++++++-- sim/bpf/ChangeLog | 4 ++ sim/bpf/aclocal.m4 | 1 + sim/bpf/config.in | 6 +++ sim/bpf/configure | 114 ++++++++++++++++++++++++++++++++++++++-- sim/cr16/ChangeLog | 4 ++ sim/cr16/aclocal.m4 | 1 + sim/cr16/config.in | 6 +++ sim/cr16/configure | 114 ++++++++++++++++++++++++++++++++++++++-- sim/d10v/ChangeLog | 4 ++ sim/d10v/aclocal.m4 | 1 + sim/d10v/config.in | 6 +++ sim/d10v/configure | 114 ++++++++++++++++++++++++++++++++++++++-- sim/erc32/ChangeLog | 4 ++ sim/erc32/aclocal.m4 | 1 + sim/erc32/config.in | 6 +++ sim/erc32/configure | 116 ++++++++++++++++++++++++++++++++++++++--- sim/example-synacor/ChangeLog | 4 ++ sim/example-synacor/aclocal.m4 | 1 + sim/example-synacor/config.in | 6 +++ sim/example-synacor/configure | 114 ++++++++++++++++++++++++++++++++++++++-- sim/frv/ChangeLog | 5 ++ sim/frv/configure | 1 - sim/frv/configure.ac | 2 - sim/ft32/ChangeLog | 4 ++ sim/ft32/aclocal.m4 | 1 + sim/ft32/config.in | 6 +++ sim/ft32/configure | 114 ++++++++++++++++++++++++++++++++++++++-- sim/h8300/ChangeLog | 4 ++ sim/h8300/aclocal.m4 | 1 + sim/h8300/config.in | 6 +++ sim/h8300/configure | 114 ++++++++++++++++++++++++++++++++++++++-- sim/iq2000/ChangeLog | 5 ++ sim/iq2000/configure | 1 - sim/iq2000/configure.ac | 2 - sim/m32c/ChangeLog | 4 ++ sim/m32c/aclocal.m4 | 1 + sim/m32c/config.in | 6 +++ sim/m32c/configure | 116 ++++++++++++++++++++++++++++++++++++++--- sim/m4/sim_ac_output.m4 | 1 + sim/mcore/ChangeLog | 4 ++ sim/mcore/aclocal.m4 | 1 + sim/mcore/config.in | 6 +++ sim/mcore/configure | 114 ++++++++++++++++++++++++++++++++++++++-- sim/microblaze/ChangeLog | 4 ++ sim/microblaze/aclocal.m4 | 1 + sim/microblaze/config.in | 6 +++ sim/microblaze/configure | 114 ++++++++++++++++++++++++++++++++++++++-- sim/moxie/ChangeLog | 4 ++ sim/moxie/aclocal.m4 | 1 + sim/moxie/config.in | 6 +++ sim/moxie/configure | 114 ++++++++++++++++++++++++++++++++++++++-- sim/msp430/ChangeLog | 4 ++ sim/msp430/aclocal.m4 | 1 + sim/msp430/config.in | 6 +++ sim/msp430/configure | 114 ++++++++++++++++++++++++++++++++++++++-- sim/or1k/ChangeLog | 4 ++ sim/or1k/aclocal.m4 | 1 + sim/or1k/config.in | 6 +++ sim/or1k/configure | 114 ++++++++++++++++++++++++++++++++++++++-- sim/pru/ChangeLog | 4 ++ sim/pru/aclocal.m4 | 1 + sim/pru/config.in | 6 +++ sim/pru/configure | 114 ++++++++++++++++++++++++++++++++++++++-- sim/riscv/ChangeLog | 4 ++ sim/riscv/aclocal.m4 | 1 + sim/riscv/config.in | 6 +++ sim/riscv/configure | 114 ++++++++++++++++++++++++++++++++++++++-- sim/rl78/ChangeLog | 4 ++ sim/rl78/aclocal.m4 | 1 + sim/rl78/config.in | 6 +++ sim/rl78/configure | 116 ++++++++++++++++++++++++++++++++++++++--- sim/rx/ChangeLog | 4 ++ sim/rx/aclocal.m4 | 1 + sim/rx/config.in | 6 +++ sim/rx/configure | 116 ++++++++++++++++++++++++++++++++++++++--- sim/sh/ChangeLog | 4 ++ sim/sh/aclocal.m4 | 1 + sim/sh/config.in | 6 +++ sim/sh/configure | 114 ++++++++++++++++++++++++++++++++++++++-- sim/v850/ChangeLog | 4 ++ sim/v850/aclocal.m4 | 1 + sim/v850/config.in | 6 +++ sim/v850/configure | 114 ++++++++++++++++++++++++++++++++++++++-- 96 files changed, 2659 insertions(+), 120 deletions(-) diff --git a/sim/ChangeLog b/sim/ChangeLog index fdeed7d..51ca492 100644 --- a/sim/ChangeLog +++ b/sim/ChangeLog @@ -1,3 +1,7 @@ +2021-04-26 Mike Frysinger + + * m4/sim_ac_output.m4 (SIM_AC_OUTPUT): Require SIM_AC_OPTION_HARDWARE. + 2021-04-23 Mike Frysinger * README-HACKING (SIM_AC_OPTION_HARDWARE): Delete first two args. diff --git a/sim/aarch64/ChangeLog b/sim/aarch64/ChangeLog index 30257c2..23736d6 100644 --- a/sim/aarch64/ChangeLog +++ b/sim/aarch64/ChangeLog @@ -1,3 +1,7 @@ +2021-04-26 Mike Frysinger + + * aclocal.m4, config.in, configure: Regenerate. + 2021-04-22 Tom Tromey * configure, config.in: Rebuild. diff --git a/sim/aarch64/aclocal.m4 b/sim/aarch64/aclocal.m4 index ddeb1f5..4300d0e 100644 --- a/sim/aarch64/aclocal.m4 +++ b/sim/aarch64/aclocal.m4 @@ -115,6 +115,7 @@ m4_include([../m4/sim_ac_option_alignment.m4]) m4_include([../m4/sim_ac_option_assert.m4]) m4_include([../m4/sim_ac_option_endian.m4]) m4_include([../m4/sim_ac_option_environment.m4]) +m4_include([../m4/sim_ac_option_hardware.m4]) m4_include([../m4/sim_ac_option_inline.m4]) m4_include([../m4/sim_ac_option_warnings.m4]) m4_include([../m4/sim_ac_output.m4]) diff --git a/sim/aarch64/config.in b/sim/aarch64/config.in index 2416b7f..8d37b72 100644 --- a/sim/aarch64/config.in +++ b/sim/aarch64/config.in @@ -13,6 +13,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H +/* Define if dv-sockser is usable. */ +#undef HAVE_DV_SOCKSER + /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H @@ -28,6 +31,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H +/* Define to 1 if you have the `m' library (-lm). */ +#undef HAVE_LIBM + /* Define to 1 if you have the `nsl' library (-lnsl). */ #undef HAVE_LIBNSL diff --git a/sim/aarch64/configure b/sim/aarch64/configure index 22d4678..1d6a498 100755 --- a/sim/aarch64/configure +++ b/sim/aarch64/configure @@ -634,9 +634,6 @@ ac_func_list= ac_subst_vars='LTLIBOBJS LIBOBJS sim_reserved_bits -sim_hw -sim_hw_objs -sim_hw_cflags sim_default_model sim_scache sim_float @@ -757,6 +754,9 @@ SHELL WERROR_CFLAGS WARN_CFLAGS sim_inline +sim_hw +sim_hw_objs +sim_hw_cflags sim_endian sim_alignment' ac_subst_files='' @@ -785,6 +785,7 @@ enable_sim_alignment enable_werror enable_build_warnings enable_sim_build_warnings +enable_sim_hardware ' ac_precious_vars='build_alias host_alias @@ -1444,6 +1445,8 @@ Optional Features: --enable-sim-build-warnings enable SIM specific build-time compiler warnings if gcc is used + --enable-sim-hardware=LIST + Specify the hardware to be included in the build. Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] @@ -11183,7 +11186,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11186 "configure" +#line 11189 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11289,7 +11292,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11292 "configure" +#line 11295 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12034,6 +12037,107 @@ fi +hardware="cfi core pal glue " +sim_hw_cflags="-DWITH_HW=1" +sim_hw="$hardware" +sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`" + +# Check whether --enable-sim-hardware was given. +if test "${enable_sim_hardware+set}" = set; then : + enableval=$enable_sim_hardware; +else + enable_sim_hardware="yes" +fi + +case ${enable_sim_hardware} in + yes|no) ;; + ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";; + *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";; + *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';; +esac + +if test "$enable_sim_hardware" = no; then + sim_hw_objs= + sim_hw_cflags="-DWITH_HW=0" + sim_hw= +else + sim_hw_cflags="-DWITH_HW=1" + # remove duplicates + sim_hw="" + sim_hw_objs="\$(SIM_COMMON_HW_OBJS)" + for i in $hardware ; do + case " $sim_hw " in + *" $i "*) ;; + *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";; + esac + done + # mingw does not support sockser + case ${host} in + *mingw*) ;; + *) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device + # that you instatiate. Instead, other code will call into it directly. + # At some point, we should convert it over. + sim_hw_objs="$sim_hw_objs dv-sockser.o" + +cat >>confdefs.h <<_ACEOF +#define HAVE_DV_SOCKSER 1 +_ACEOF + + ;; + esac + if test x"$silent" != x"yes"; then + echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs" + fi + case " $hardware " in + *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5 +$as_echo_n "checking for log2 in -lm... " >&6; } +if ${ac_cv_lib_m_log2+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char log2 (); +int +main () +{ +return log2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_log2=yes +else + ac_cv_lib_m_log2=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_log2" >&5 +$as_echo "$ac_cv_lib_m_log2" >&6; } +if test "x$ac_cv_lib_m_log2" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +fi +;; + esac +fi + + cgen_breaks="" if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then cgen_breaks="break cgen_rtx_error"; diff --git a/sim/arm/ChangeLog b/sim/arm/ChangeLog index fbd977c..c466deb 100644 --- a/sim/arm/ChangeLog +++ b/sim/arm/ChangeLog @@ -1,3 +1,7 @@ +2021-04-26 Mike Frysinger + + * aclocal.m4, config.in, configure: Regenerate. + 2021-04-26 Nick Clifton PR 22790 diff --git a/sim/arm/aclocal.m4 b/sim/arm/aclocal.m4 index ddeb1f5..4300d0e 100644 --- a/sim/arm/aclocal.m4 +++ b/sim/arm/aclocal.m4 @@ -115,6 +115,7 @@ m4_include([../m4/sim_ac_option_alignment.m4]) m4_include([../m4/sim_ac_option_assert.m4]) m4_include([../m4/sim_ac_option_endian.m4]) m4_include([../m4/sim_ac_option_environment.m4]) +m4_include([../m4/sim_ac_option_hardware.m4]) m4_include([../m4/sim_ac_option_inline.m4]) m4_include([../m4/sim_ac_option_warnings.m4]) m4_include([../m4/sim_ac_output.m4]) diff --git a/sim/arm/config.in b/sim/arm/config.in index 2416b7f..8d37b72 100644 --- a/sim/arm/config.in +++ b/sim/arm/config.in @@ -13,6 +13,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H +/* Define if dv-sockser is usable. */ +#undef HAVE_DV_SOCKSER + /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H @@ -28,6 +31,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H +/* Define to 1 if you have the `m' library (-lm). */ +#undef HAVE_LIBM + /* Define to 1 if you have the `nsl' library (-lnsl). */ #undef HAVE_LIBNSL diff --git a/sim/arm/configure b/sim/arm/configure index 2a74bb7..8cabf92 100755 --- a/sim/arm/configure +++ b/sim/arm/configure @@ -634,9 +634,6 @@ ac_func_list= ac_subst_vars='LTLIBOBJS LIBOBJS sim_reserved_bits -sim_hw -sim_hw_objs -sim_hw_cflags sim_default_model sim_scache sim_float @@ -757,6 +754,9 @@ SHELL WERROR_CFLAGS WARN_CFLAGS sim_inline +sim_hw +sim_hw_objs +sim_hw_cflags sim_endian sim_alignment' ac_subst_files='' @@ -785,6 +785,7 @@ enable_sim_alignment enable_werror enable_build_warnings enable_sim_build_warnings +enable_sim_hardware ' ac_precious_vars='build_alias host_alias @@ -1444,6 +1445,8 @@ Optional Features: --enable-sim-build-warnings enable SIM specific build-time compiler warnings if gcc is used + --enable-sim-hardware=LIST + Specify the hardware to be included in the build. Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] @@ -11183,7 +11186,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11186 "configure" +#line 11189 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11289,7 +11292,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11292 "configure" +#line 11295 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12030,6 +12033,107 @@ fi +hardware="cfi core pal glue " +sim_hw_cflags="-DWITH_HW=1" +sim_hw="$hardware" +sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`" + +# Check whether --enable-sim-hardware was given. +if test "${enable_sim_hardware+set}" = set; then : + enableval=$enable_sim_hardware; +else + enable_sim_hardware="yes" +fi + +case ${enable_sim_hardware} in + yes|no) ;; + ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";; + *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";; + *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';; +esac + +if test "$enable_sim_hardware" = no; then + sim_hw_objs= + sim_hw_cflags="-DWITH_HW=0" + sim_hw= +else + sim_hw_cflags="-DWITH_HW=1" + # remove duplicates + sim_hw="" + sim_hw_objs="\$(SIM_COMMON_HW_OBJS)" + for i in $hardware ; do + case " $sim_hw " in + *" $i "*) ;; + *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";; + esac + done + # mingw does not support sockser + case ${host} in + *mingw*) ;; + *) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device + # that you instatiate. Instead, other code will call into it directly. + # At some point, we should convert it over. + sim_hw_objs="$sim_hw_objs dv-sockser.o" + +cat >>confdefs.h <<_ACEOF +#define HAVE_DV_SOCKSER 1 +_ACEOF + + ;; + esac + if test x"$silent" != x"yes"; then + echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs" + fi + case " $hardware " in + *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5 +$as_echo_n "checking for log2 in -lm... " >&6; } +if ${ac_cv_lib_m_log2+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char log2 (); +int +main () +{ +return log2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_log2=yes +else + ac_cv_lib_m_log2=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_log2" >&5 +$as_echo "$ac_cv_lib_m_log2" >&6; } +if test "x$ac_cv_lib_m_log2" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +fi +;; + esac +fi + + cgen_breaks="" if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then cgen_breaks="break cgen_rtx_error"; diff --git a/sim/avr/ChangeLog b/sim/avr/ChangeLog index c8f51eb..9c53284 100644 --- a/sim/avr/ChangeLog +++ b/sim/avr/ChangeLog @@ -1,3 +1,7 @@ +2021-04-26 Mike Frysinger + + * aclocal.m4, config.in, configure: Regenerate. + 2021-04-22 Tom Tromey * configure, config.in: Rebuild. diff --git a/sim/avr/aclocal.m4 b/sim/avr/aclocal.m4 index ddeb1f5..4300d0e 100644 --- a/sim/avr/aclocal.m4 +++ b/sim/avr/aclocal.m4 @@ -115,6 +115,7 @@ m4_include([../m4/sim_ac_option_alignment.m4]) m4_include([../m4/sim_ac_option_assert.m4]) m4_include([../m4/sim_ac_option_endian.m4]) m4_include([../m4/sim_ac_option_environment.m4]) +m4_include([../m4/sim_ac_option_hardware.m4]) m4_include([../m4/sim_ac_option_inline.m4]) m4_include([../m4/sim_ac_option_warnings.m4]) m4_include([../m4/sim_ac_output.m4]) diff --git a/sim/avr/config.in b/sim/avr/config.in index 2416b7f..8d37b72 100644 --- a/sim/avr/config.in +++ b/sim/avr/config.in @@ -13,6 +13,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H +/* Define if dv-sockser is usable. */ +#undef HAVE_DV_SOCKSER + /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H @@ -28,6 +31,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H +/* Define to 1 if you have the `m' library (-lm). */ +#undef HAVE_LIBM + /* Define to 1 if you have the `nsl' library (-lnsl). */ #undef HAVE_LIBNSL diff --git a/sim/avr/configure b/sim/avr/configure index ae50e46..5c43b29 100755 --- a/sim/avr/configure +++ b/sim/avr/configure @@ -634,9 +634,6 @@ ac_func_list= ac_subst_vars='LTLIBOBJS LIBOBJS sim_reserved_bits -sim_hw -sim_hw_objs -sim_hw_cflags sim_default_model sim_scache sim_float @@ -757,6 +754,9 @@ SHELL WERROR_CFLAGS WARN_CFLAGS sim_inline +sim_hw +sim_hw_objs +sim_hw_cflags sim_endian sim_alignment' ac_subst_files='' @@ -785,6 +785,7 @@ enable_sim_alignment enable_werror enable_build_warnings enable_sim_build_warnings +enable_sim_hardware ' ac_precious_vars='build_alias host_alias @@ -1444,6 +1445,8 @@ Optional Features: --enable-sim-build-warnings enable SIM specific build-time compiler warnings if gcc is used + --enable-sim-hardware=LIST + Specify the hardware to be included in the build. Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] @@ -11183,7 +11186,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11186 "configure" +#line 11189 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11289,7 +11292,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11292 "configure" +#line 11295 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12030,6 +12033,107 @@ fi +hardware="cfi core pal glue " +sim_hw_cflags="-DWITH_HW=1" +sim_hw="$hardware" +sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`" + +# Check whether --enable-sim-hardware was given. +if test "${enable_sim_hardware+set}" = set; then : + enableval=$enable_sim_hardware; +else + enable_sim_hardware="yes" +fi + +case ${enable_sim_hardware} in + yes|no) ;; + ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";; + *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";; + *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';; +esac + +if test "$enable_sim_hardware" = no; then + sim_hw_objs= + sim_hw_cflags="-DWITH_HW=0" + sim_hw= +else + sim_hw_cflags="-DWITH_HW=1" + # remove duplicates + sim_hw="" + sim_hw_objs="\$(SIM_COMMON_HW_OBJS)" + for i in $hardware ; do + case " $sim_hw " in + *" $i "*) ;; + *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";; + esac + done + # mingw does not support sockser + case ${host} in + *mingw*) ;; + *) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device + # that you instatiate. Instead, other code will call into it directly. + # At some point, we should convert it over. + sim_hw_objs="$sim_hw_objs dv-sockser.o" + +cat >>confdefs.h <<_ACEOF +#define HAVE_DV_SOCKSER 1 +_ACEOF + + ;; + esac + if test x"$silent" != x"yes"; then + echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs" + fi + case " $hardware " in + *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5 +$as_echo_n "checking for log2 in -lm... " >&6; } +if ${ac_cv_lib_m_log2+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char log2 (); +int +main () +{ +return log2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_log2=yes +else + ac_cv_lib_m_log2=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_log2" >&5 +$as_echo "$ac_cv_lib_m_log2" >&6; } +if test "x$ac_cv_lib_m_log2" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +fi +;; + esac +fi + + cgen_breaks="" if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then cgen_breaks="break cgen_rtx_error"; diff --git a/sim/bpf/ChangeLog b/sim/bpf/ChangeLog index 9021585..e5e2231 100644 --- a/sim/bpf/ChangeLog +++ b/sim/bpf/ChangeLog @@ -1,3 +1,7 @@ +2021-04-26 Mike Frysinger + + * aclocal.m4, config.in, configure: Regenerate. + 2021-04-22 Tom Tromey * configure, config.in: Rebuild. diff --git a/sim/bpf/aclocal.m4 b/sim/bpf/aclocal.m4 index 73a795c..e1659b4 100644 --- a/sim/bpf/aclocal.m4 +++ b/sim/bpf/aclocal.m4 @@ -118,6 +118,7 @@ m4_include([../m4/sim_ac_option_cgen_maint.m4]) m4_include([../m4/sim_ac_option_default_model.m4]) m4_include([../m4/sim_ac_option_endian.m4]) m4_include([../m4/sim_ac_option_environment.m4]) +m4_include([../m4/sim_ac_option_hardware.m4]) m4_include([../m4/sim_ac_option_inline.m4]) m4_include([../m4/sim_ac_option_scache.m4]) m4_include([../m4/sim_ac_option_warnings.m4]) diff --git a/sim/bpf/config.in b/sim/bpf/config.in index 2416b7f..8d37b72 100644 --- a/sim/bpf/config.in +++ b/sim/bpf/config.in @@ -13,6 +13,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H +/* Define if dv-sockser is usable. */ +#undef HAVE_DV_SOCKSER + /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H @@ -28,6 +31,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H +/* Define to 1 if you have the `m' library (-lm). */ +#undef HAVE_LIBM + /* Define to 1 if you have the `nsl' library (-lnsl). */ #undef HAVE_LIBNSL diff --git a/sim/bpf/configure b/sim/bpf/configure index 31e7c82..32b4a77 100755 --- a/sim/bpf/configure +++ b/sim/bpf/configure @@ -634,9 +634,6 @@ ac_func_list= ac_subst_vars='LTLIBOBJS LIBOBJS sim_reserved_bits -sim_hw -sim_hw_objs -sim_hw_cflags sim_float cgen_breaks cgen @@ -758,6 +755,9 @@ WERROR_CFLAGS WARN_CFLAGS sim_scache sim_inline +sim_hw +sim_hw_objs +sim_hw_cflags sim_endian sim_default_model sim_bitsize @@ -792,6 +792,7 @@ enable_werror enable_build_warnings enable_sim_build_warnings enable_cgen_maint +enable_sim_hardware ' ac_precious_vars='build_alias host_alias @@ -1457,6 +1458,8 @@ Optional Features: enable SIM specific build-time compiler warnings if gcc is used --enable-cgen-maint=DIR build cgen generated files + --enable-sim-hardware=LIST + Specify the hardware to be included in the build. Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] @@ -11196,7 +11199,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11199 "configure" +#line 11202 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11302,7 +11305,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11305 "configure" +#line 11308 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12167,6 +12170,107 @@ fi +hardware="cfi core pal glue " +sim_hw_cflags="-DWITH_HW=1" +sim_hw="$hardware" +sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`" + +# Check whether --enable-sim-hardware was given. +if test "${enable_sim_hardware+set}" = set; then : + enableval=$enable_sim_hardware; +else + enable_sim_hardware="yes" +fi + +case ${enable_sim_hardware} in + yes|no) ;; + ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";; + *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";; + *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';; +esac + +if test "$enable_sim_hardware" = no; then + sim_hw_objs= + sim_hw_cflags="-DWITH_HW=0" + sim_hw= +else + sim_hw_cflags="-DWITH_HW=1" + # remove duplicates + sim_hw="" + sim_hw_objs="\$(SIM_COMMON_HW_OBJS)" + for i in $hardware ; do + case " $sim_hw " in + *" $i "*) ;; + *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";; + esac + done + # mingw does not support sockser + case ${host} in + *mingw*) ;; + *) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device + # that you instatiate. Instead, other code will call into it directly. + # At some point, we should convert it over. + sim_hw_objs="$sim_hw_objs dv-sockser.o" + +cat >>confdefs.h <<_ACEOF +#define HAVE_DV_SOCKSER 1 +_ACEOF + + ;; + esac + if test x"$silent" != x"yes"; then + echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs" + fi + case " $hardware " in + *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5 +$as_echo_n "checking for log2 in -lm... " >&6; } +if ${ac_cv_lib_m_log2+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char log2 (); +int +main () +{ +return log2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_log2=yes +else + ac_cv_lib_m_log2=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_log2" >&5 +$as_echo "$ac_cv_lib_m_log2" >&6; } +if test "x$ac_cv_lib_m_log2" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +fi +;; + esac +fi + + cgen_breaks="" if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then cgen_breaks="break cgen_rtx_error"; diff --git a/sim/cr16/ChangeLog b/sim/cr16/ChangeLog index 4be46d6..2540c37 100644 --- a/sim/cr16/ChangeLog +++ b/sim/cr16/ChangeLog @@ -1,3 +1,7 @@ +2021-04-26 Mike Frysinger + + * aclocal.m4, config.in, configure: Regenerate. + 2021-04-22 Tom Tromey * simops.c: Update includes. diff --git a/sim/cr16/aclocal.m4 b/sim/cr16/aclocal.m4 index ddeb1f5..4300d0e 100644 --- a/sim/cr16/aclocal.m4 +++ b/sim/cr16/aclocal.m4 @@ -115,6 +115,7 @@ m4_include([../m4/sim_ac_option_alignment.m4]) m4_include([../m4/sim_ac_option_assert.m4]) m4_include([../m4/sim_ac_option_endian.m4]) m4_include([../m4/sim_ac_option_environment.m4]) +m4_include([../m4/sim_ac_option_hardware.m4]) m4_include([../m4/sim_ac_option_inline.m4]) m4_include([../m4/sim_ac_option_warnings.m4]) m4_include([../m4/sim_ac_output.m4]) diff --git a/sim/cr16/config.in b/sim/cr16/config.in index 2416b7f..8d37b72 100644 --- a/sim/cr16/config.in +++ b/sim/cr16/config.in @@ -13,6 +13,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H +/* Define if dv-sockser is usable. */ +#undef HAVE_DV_SOCKSER + /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H @@ -28,6 +31,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H +/* Define to 1 if you have the `m' library (-lm). */ +#undef HAVE_LIBM + /* Define to 1 if you have the `nsl' library (-lnsl). */ #undef HAVE_LIBNSL diff --git a/sim/cr16/configure b/sim/cr16/configure index f0cfde9..b0d92ce 100755 --- a/sim/cr16/configure +++ b/sim/cr16/configure @@ -634,9 +634,6 @@ ac_func_list= ac_subst_vars='LTLIBOBJS LIBOBJS sim_reserved_bits -sim_hw -sim_hw_objs -sim_hw_cflags sim_default_model sim_scache sim_float @@ -757,6 +754,9 @@ SHELL WERROR_CFLAGS WARN_CFLAGS sim_inline +sim_hw +sim_hw_objs +sim_hw_cflags sim_endian sim_alignment' ac_subst_files='' @@ -785,6 +785,7 @@ enable_sim_alignment enable_werror enable_build_warnings enable_sim_build_warnings +enable_sim_hardware ' ac_precious_vars='build_alias host_alias @@ -1444,6 +1445,8 @@ Optional Features: --enable-sim-build-warnings enable SIM specific build-time compiler warnings if gcc is used + --enable-sim-hardware=LIST + Specify the hardware to be included in the build. Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] @@ -11183,7 +11186,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11186 "configure" +#line 11189 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11289,7 +11292,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11292 "configure" +#line 11295 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12030,6 +12033,107 @@ $as_echo "${WARN_CFLAGS} ${WERROR_CFLAGS}" >&6; } fi +hardware="cfi core pal glue " +sim_hw_cflags="-DWITH_HW=1" +sim_hw="$hardware" +sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`" + +# Check whether --enable-sim-hardware was given. +if test "${enable_sim_hardware+set}" = set; then : + enableval=$enable_sim_hardware; +else + enable_sim_hardware="yes" +fi + +case ${enable_sim_hardware} in + yes|no) ;; + ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";; + *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";; + *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';; +esac + +if test "$enable_sim_hardware" = no; then + sim_hw_objs= + sim_hw_cflags="-DWITH_HW=0" + sim_hw= +else + sim_hw_cflags="-DWITH_HW=1" + # remove duplicates + sim_hw="" + sim_hw_objs="\$(SIM_COMMON_HW_OBJS)" + for i in $hardware ; do + case " $sim_hw " in + *" $i "*) ;; + *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";; + esac + done + # mingw does not support sockser + case ${host} in + *mingw*) ;; + *) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device + # that you instatiate. Instead, other code will call into it directly. + # At some point, we should convert it over. + sim_hw_objs="$sim_hw_objs dv-sockser.o" + +cat >>confdefs.h <<_ACEOF +#define HAVE_DV_SOCKSER 1 +_ACEOF + + ;; + esac + if test x"$silent" != x"yes"; then + echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs" + fi + case " $hardware " in + *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5 +$as_echo_n "checking for log2 in -lm... " >&6; } +if ${ac_cv_lib_m_log2+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char log2 (); +int +main () +{ +return log2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_log2=yes +else + ac_cv_lib_m_log2=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_log2" >&5 +$as_echo "$ac_cv_lib_m_log2" >&6; } +if test "x$ac_cv_lib_m_log2" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +fi +;; + esac +fi + + cgen_breaks="" if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then cgen_breaks="break cgen_rtx_error"; diff --git a/sim/d10v/ChangeLog b/sim/d10v/ChangeLog index 22d1e8f..9945be4 100644 --- a/sim/d10v/ChangeLog +++ b/sim/d10v/ChangeLog @@ -1,3 +1,7 @@ +2021-04-26 Mike Frysinger + + * aclocal.m4, config.in, configure: Regenerate. + 2021-04-22 Tom Tromey * configure, config.in: Rebuild. diff --git a/sim/d10v/aclocal.m4 b/sim/d10v/aclocal.m4 index ddeb1f5..4300d0e 100644 --- a/sim/d10v/aclocal.m4 +++ b/sim/d10v/aclocal.m4 @@ -115,6 +115,7 @@ m4_include([../m4/sim_ac_option_alignment.m4]) m4_include([../m4/sim_ac_option_assert.m4]) m4_include([../m4/sim_ac_option_endian.m4]) m4_include([../m4/sim_ac_option_environment.m4]) +m4_include([../m4/sim_ac_option_hardware.m4]) m4_include([../m4/sim_ac_option_inline.m4]) m4_include([../m4/sim_ac_option_warnings.m4]) m4_include([../m4/sim_ac_output.m4]) diff --git a/sim/d10v/config.in b/sim/d10v/config.in index 2416b7f..8d37b72 100644 --- a/sim/d10v/config.in +++ b/sim/d10v/config.in @@ -13,6 +13,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H +/* Define if dv-sockser is usable. */ +#undef HAVE_DV_SOCKSER + /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H @@ -28,6 +31,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H +/* Define to 1 if you have the `m' library (-lm). */ +#undef HAVE_LIBM + /* Define to 1 if you have the `nsl' library (-lnsl). */ #undef HAVE_LIBNSL diff --git a/sim/d10v/configure b/sim/d10v/configure index c02a02b..3daef52 100755 --- a/sim/d10v/configure +++ b/sim/d10v/configure @@ -634,9 +634,6 @@ ac_func_list= ac_subst_vars='LTLIBOBJS LIBOBJS sim_reserved_bits -sim_hw -sim_hw_objs -sim_hw_cflags sim_default_model sim_scache sim_float @@ -757,6 +754,9 @@ SHELL WERROR_CFLAGS WARN_CFLAGS sim_inline +sim_hw +sim_hw_objs +sim_hw_cflags sim_endian sim_alignment' ac_subst_files='' @@ -785,6 +785,7 @@ enable_sim_alignment enable_werror enable_build_warnings enable_sim_build_warnings +enable_sim_hardware ' ac_precious_vars='build_alias host_alias @@ -1444,6 +1445,8 @@ Optional Features: --enable-sim-build-warnings enable SIM specific build-time compiler warnings if gcc is used + --enable-sim-hardware=LIST + Specify the hardware to be included in the build. Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] @@ -11183,7 +11186,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11186 "configure" +#line 11189 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11289,7 +11292,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11292 "configure" +#line 11295 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12030,6 +12033,107 @@ $as_echo "${WARN_CFLAGS} ${WERROR_CFLAGS}" >&6; } fi +hardware="cfi core pal glue " +sim_hw_cflags="-DWITH_HW=1" +sim_hw="$hardware" +sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`" + +# Check whether --enable-sim-hardware was given. +if test "${enable_sim_hardware+set}" = set; then : + enableval=$enable_sim_hardware; +else + enable_sim_hardware="yes" +fi + +case ${enable_sim_hardware} in + yes|no) ;; + ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";; + *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";; + *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';; +esac + +if test "$enable_sim_hardware" = no; then + sim_hw_objs= + sim_hw_cflags="-DWITH_HW=0" + sim_hw= +else + sim_hw_cflags="-DWITH_HW=1" + # remove duplicates + sim_hw="" + sim_hw_objs="\$(SIM_COMMON_HW_OBJS)" + for i in $hardware ; do + case " $sim_hw " in + *" $i "*) ;; + *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";; + esac + done + # mingw does not support sockser + case ${host} in + *mingw*) ;; + *) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device + # that you instatiate. Instead, other code will call into it directly. + # At some point, we should convert it over. + sim_hw_objs="$sim_hw_objs dv-sockser.o" + +cat >>confdefs.h <<_ACEOF +#define HAVE_DV_SOCKSER 1 +_ACEOF + + ;; + esac + if test x"$silent" != x"yes"; then + echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs" + fi + case " $hardware " in + *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5 +$as_echo_n "checking for log2 in -lm... " >&6; } +if ${ac_cv_lib_m_log2+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char log2 (); +int +main () +{ +return log2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_log2=yes +else + ac_cv_lib_m_log2=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_log2" >&5 +$as_echo "$ac_cv_lib_m_log2" >&6; } +if test "x$ac_cv_lib_m_log2" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +fi +;; + esac +fi + + cgen_breaks="" if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then cgen_breaks="break cgen_rtx_error"; diff --git a/sim/erc32/ChangeLog b/sim/erc32/ChangeLog index 0a7d033..a6d1cad 100644 --- a/sim/erc32/ChangeLog +++ b/sim/erc32/ChangeLog @@ -1,3 +1,7 @@ +2021-04-26 Mike Frysinger + + * aclocal.m4, config.in, configure: Regenerate. + 2021-04-22 Tom Tromey * configure, config.in: Rebuild. diff --git a/sim/erc32/aclocal.m4 b/sim/erc32/aclocal.m4 index db8c5cd..ed05269 100644 --- a/sim/erc32/aclocal.m4 +++ b/sim/erc32/aclocal.m4 @@ -113,6 +113,7 @@ m4_include([../../lt~obsolete.m4]) m4_include([../m4/sim_ac_common.m4]) m4_include([../m4/sim_ac_option_assert.m4]) m4_include([../m4/sim_ac_option_environment.m4]) +m4_include([../m4/sim_ac_option_hardware.m4]) m4_include([../m4/sim_ac_option_inline.m4]) m4_include([../m4/sim_ac_option_warnings.m4]) m4_include([../m4/sim_ac_output.m4]) diff --git a/sim/erc32/config.in b/sim/erc32/config.in index 2416b7f..8d37b72 100644 --- a/sim/erc32/config.in +++ b/sim/erc32/config.in @@ -13,6 +13,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H +/* Define if dv-sockser is usable. */ +#undef HAVE_DV_SOCKSER + /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H @@ -28,6 +31,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H +/* Define to 1 if you have the `m' library (-lm). */ +#undef HAVE_LIBM + /* Define to 1 if you have the `nsl' library (-lnsl). */ #undef HAVE_LIBNSL diff --git a/sim/erc32/configure b/sim/erc32/configure index eab6d86..a884ee7 100755 --- a/sim/erc32/configure +++ b/sim/erc32/configure @@ -634,9 +634,6 @@ ac_func_list= ac_subst_vars='LTLIBOBJS LIBOBJS sim_reserved_bits -sim_hw -sim_hw_objs -sim_hw_cflags sim_default_model sim_scache sim_float @@ -761,7 +758,10 @@ PATH_SEPARATOR SHELL WERROR_CFLAGS WARN_CFLAGS -sim_inline' +sim_inline +sim_hw +sim_hw_objs +sim_hw_cflags' ac_subst_files='' ac_user_opts=' enable_option_checking @@ -786,6 +786,7 @@ with_bugurl enable_werror enable_build_warnings enable_sim_build_warnings +enable_sim_hardware ' ac_precious_vars='build_alias host_alias @@ -1440,6 +1441,8 @@ Optional Features: --enable-sim-build-warnings enable SIM specific build-time compiler warnings if gcc is used + --enable-sim-hardware=LIST + Specify the hardware to be included in the build. Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] @@ -11179,7 +11182,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11182 "configure" +#line 11185 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11285,7 +11288,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11288 "configure" +#line 11291 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12072,6 +12075,107 @@ fi +hardware="cfi core pal glue " +sim_hw_cflags="-DWITH_HW=1" +sim_hw="$hardware" +sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`" + +# Check whether --enable-sim-hardware was given. +if test "${enable_sim_hardware+set}" = set; then : + enableval=$enable_sim_hardware; +else + enable_sim_hardware="yes" +fi + +case ${enable_sim_hardware} in + yes|no) ;; + ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";; + *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";; + *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';; +esac + +if test "$enable_sim_hardware" = no; then + sim_hw_objs= + sim_hw_cflags="-DWITH_HW=0" + sim_hw= +else + sim_hw_cflags="-DWITH_HW=1" + # remove duplicates + sim_hw="" + sim_hw_objs="\$(SIM_COMMON_HW_OBJS)" + for i in $hardware ; do + case " $sim_hw " in + *" $i "*) ;; + *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";; + esac + done + # mingw does not support sockser + case ${host} in + *mingw*) ;; + *) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device + # that you instatiate. Instead, other code will call into it directly. + # At some point, we should convert it over. + sim_hw_objs="$sim_hw_objs dv-sockser.o" + +cat >>confdefs.h <<_ACEOF +#define HAVE_DV_SOCKSER 1 +_ACEOF + + ;; + esac + if test x"$silent" != x"yes"; then + echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs" + fi + case " $hardware " in + *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5 +$as_echo_n "checking for log2 in -lm... " >&6; } +if ${ac_cv_lib_m_log2+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char log2 (); +int +main () +{ +return log2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_log2=yes +else + ac_cv_lib_m_log2=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_log2" >&5 +$as_echo "$ac_cv_lib_m_log2" >&6; } +if test "x$ac_cv_lib_m_log2" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +fi +;; + esac +fi + + cgen_breaks="" if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then cgen_breaks="break cgen_rtx_error"; diff --git a/sim/example-synacor/ChangeLog b/sim/example-synacor/ChangeLog index a5c868b..8865093 100644 --- a/sim/example-synacor/ChangeLog +++ b/sim/example-synacor/ChangeLog @@ -1,3 +1,7 @@ +2021-04-26 Mike Frysinger + + * aclocal.m4, config.in, configure: Regenerate. + 2021-04-22 Tom Tromey * configure, config.in: Rebuild. diff --git a/sim/example-synacor/aclocal.m4 b/sim/example-synacor/aclocal.m4 index ddeb1f5..4300d0e 100644 --- a/sim/example-synacor/aclocal.m4 +++ b/sim/example-synacor/aclocal.m4 @@ -115,6 +115,7 @@ m4_include([../m4/sim_ac_option_alignment.m4]) m4_include([../m4/sim_ac_option_assert.m4]) m4_include([../m4/sim_ac_option_endian.m4]) m4_include([../m4/sim_ac_option_environment.m4]) +m4_include([../m4/sim_ac_option_hardware.m4]) m4_include([../m4/sim_ac_option_inline.m4]) m4_include([../m4/sim_ac_option_warnings.m4]) m4_include([../m4/sim_ac_output.m4]) diff --git a/sim/example-synacor/config.in b/sim/example-synacor/config.in index 2416b7f..8d37b72 100644 --- a/sim/example-synacor/config.in +++ b/sim/example-synacor/config.in @@ -13,6 +13,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H +/* Define if dv-sockser is usable. */ +#undef HAVE_DV_SOCKSER + /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H @@ -28,6 +31,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H +/* Define to 1 if you have the `m' library (-lm). */ +#undef HAVE_LIBM + /* Define to 1 if you have the `nsl' library (-lnsl). */ #undef HAVE_LIBNSL diff --git a/sim/example-synacor/configure b/sim/example-synacor/configure index 7fab5fa..a5938be 100755 --- a/sim/example-synacor/configure +++ b/sim/example-synacor/configure @@ -634,9 +634,6 @@ ac_func_list= ac_subst_vars='LTLIBOBJS LIBOBJS sim_reserved_bits -sim_hw -sim_hw_objs -sim_hw_cflags sim_default_model sim_scache sim_float @@ -757,6 +754,9 @@ SHELL WERROR_CFLAGS WARN_CFLAGS sim_inline +sim_hw +sim_hw_objs +sim_hw_cflags sim_endian sim_alignment' ac_subst_files='' @@ -785,6 +785,7 @@ enable_sim_alignment enable_werror enable_build_warnings enable_sim_build_warnings +enable_sim_hardware ' ac_precious_vars='build_alias host_alias @@ -1444,6 +1445,8 @@ Optional Features: --enable-sim-build-warnings enable SIM specific build-time compiler warnings if gcc is used + --enable-sim-hardware=LIST + Specify the hardware to be included in the build. Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] @@ -11183,7 +11186,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11186 "configure" +#line 11189 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11289,7 +11292,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11292 "configure" +#line 11295 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12030,6 +12033,107 @@ $as_echo "${WARN_CFLAGS} ${WERROR_CFLAGS}" >&6; } fi +hardware="cfi core pal glue " +sim_hw_cflags="-DWITH_HW=1" +sim_hw="$hardware" +sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`" + +# Check whether --enable-sim-hardware was given. +if test "${enable_sim_hardware+set}" = set; then : + enableval=$enable_sim_hardware; +else + enable_sim_hardware="yes" +fi + +case ${enable_sim_hardware} in + yes|no) ;; + ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";; + *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";; + *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';; +esac + +if test "$enable_sim_hardware" = no; then + sim_hw_objs= + sim_hw_cflags="-DWITH_HW=0" + sim_hw= +else + sim_hw_cflags="-DWITH_HW=1" + # remove duplicates + sim_hw="" + sim_hw_objs="\$(SIM_COMMON_HW_OBJS)" + for i in $hardware ; do + case " $sim_hw " in + *" $i "*) ;; + *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";; + esac + done + # mingw does not support sockser + case ${host} in + *mingw*) ;; + *) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device + # that you instatiate. Instead, other code will call into it directly. + # At some point, we should convert it over. + sim_hw_objs="$sim_hw_objs dv-sockser.o" + +cat >>confdefs.h <<_ACEOF +#define HAVE_DV_SOCKSER 1 +_ACEOF + + ;; + esac + if test x"$silent" != x"yes"; then + echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs" + fi + case " $hardware " in + *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5 +$as_echo_n "checking for log2 in -lm... " >&6; } +if ${ac_cv_lib_m_log2+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char log2 (); +int +main () +{ +return log2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_log2=yes +else + ac_cv_lib_m_log2=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_log2" >&5 +$as_echo "$ac_cv_lib_m_log2" >&6; } +if test "x$ac_cv_lib_m_log2" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +fi +;; + esac +fi + + cgen_breaks="" if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then cgen_breaks="break cgen_rtx_error"; diff --git a/sim/frv/ChangeLog b/sim/frv/ChangeLog index bc981ac..6452399 100644 --- a/sim/frv/ChangeLog +++ b/sim/frv/ChangeLog @@ -1,3 +1,8 @@ +2021-04-26 Mike Frysinger + + * configure.ac (SIM_AC_OPTION_HARDWARE): Delete call. + * configure: Regenerate. + 2021-04-23 Mike Frysinger * configure.ac (SIM_AC_OPTION_HARDWARE): Delete arguments. diff --git a/sim/frv/configure b/sim/frv/configure index 30c7c81..921f622 100755 --- a/sim/frv/configure +++ b/sim/frv/configure @@ -12231,7 +12231,6 @@ fi fi - cgen_breaks="" if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then cgen_breaks="break cgen_rtx_error"; diff --git a/sim/frv/configure.ac b/sim/frv/configure.ac index 6588fe5..e5bbdbf 100644 --- a/sim/frv/configure.ac +++ b/sim/frv/configure.ac @@ -27,6 +27,4 @@ if test x"$silent" != x"yes" && test x"$sim_trapdump" != x""; then fi],[sim_trapdump=""])dnl AC_SUBST(sim_trapdump) -SIM_AC_OPTION_HARDWARE - SIM_AC_OUTPUT diff --git a/sim/ft32/ChangeLog b/sim/ft32/ChangeLog index 0a06ef3..6a26436 100644 --- a/sim/ft32/ChangeLog +++ b/sim/ft32/ChangeLog @@ -1,3 +1,7 @@ +2021-04-26 Mike Frysinger + + * aclocal.m4, config.in, configure: Regenerate. + 2021-04-22 Tom Tromey * configure, config.in: Rebuild. diff --git a/sim/ft32/aclocal.m4 b/sim/ft32/aclocal.m4 index ddeb1f5..4300d0e 100644 --- a/sim/ft32/aclocal.m4 +++ b/sim/ft32/aclocal.m4 @@ -115,6 +115,7 @@ m4_include([../m4/sim_ac_option_alignment.m4]) m4_include([../m4/sim_ac_option_assert.m4]) m4_include([../m4/sim_ac_option_endian.m4]) m4_include([../m4/sim_ac_option_environment.m4]) +m4_include([../m4/sim_ac_option_hardware.m4]) m4_include([../m4/sim_ac_option_inline.m4]) m4_include([../m4/sim_ac_option_warnings.m4]) m4_include([../m4/sim_ac_output.m4]) diff --git a/sim/ft32/config.in b/sim/ft32/config.in index 2416b7f..8d37b72 100644 --- a/sim/ft32/config.in +++ b/sim/ft32/config.in @@ -13,6 +13,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H +/* Define if dv-sockser is usable. */ +#undef HAVE_DV_SOCKSER + /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H @@ -28,6 +31,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H +/* Define to 1 if you have the `m' library (-lm). */ +#undef HAVE_LIBM + /* Define to 1 if you have the `nsl' library (-lnsl). */ #undef HAVE_LIBNSL diff --git a/sim/ft32/configure b/sim/ft32/configure index 2f14e5a..d80f8f8 100755 --- a/sim/ft32/configure +++ b/sim/ft32/configure @@ -634,9 +634,6 @@ ac_func_list= ac_subst_vars='LTLIBOBJS LIBOBJS sim_reserved_bits -sim_hw -sim_hw_objs -sim_hw_cflags sim_default_model sim_scache sim_float @@ -757,6 +754,9 @@ SHELL WERROR_CFLAGS WARN_CFLAGS sim_inline +sim_hw +sim_hw_objs +sim_hw_cflags sim_endian sim_alignment' ac_subst_files='' @@ -785,6 +785,7 @@ enable_sim_alignment enable_werror enable_build_warnings enable_sim_build_warnings +enable_sim_hardware ' ac_precious_vars='build_alias host_alias @@ -1444,6 +1445,8 @@ Optional Features: --enable-sim-build-warnings enable SIM specific build-time compiler warnings if gcc is used + --enable-sim-hardware=LIST + Specify the hardware to be included in the build. Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] @@ -11183,7 +11186,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11186 "configure" +#line 11189 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11289,7 +11292,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11292 "configure" +#line 11295 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12030,6 +12033,107 @@ fi +hardware="cfi core pal glue " +sim_hw_cflags="-DWITH_HW=1" +sim_hw="$hardware" +sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`" + +# Check whether --enable-sim-hardware was given. +if test "${enable_sim_hardware+set}" = set; then : + enableval=$enable_sim_hardware; +else + enable_sim_hardware="yes" +fi + +case ${enable_sim_hardware} in + yes|no) ;; + ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";; + *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";; + *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';; +esac + +if test "$enable_sim_hardware" = no; then + sim_hw_objs= + sim_hw_cflags="-DWITH_HW=0" + sim_hw= +else + sim_hw_cflags="-DWITH_HW=1" + # remove duplicates + sim_hw="" + sim_hw_objs="\$(SIM_COMMON_HW_OBJS)" + for i in $hardware ; do + case " $sim_hw " in + *" $i "*) ;; + *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";; + esac + done + # mingw does not support sockser + case ${host} in + *mingw*) ;; + *) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device + # that you instatiate. Instead, other code will call into it directly. + # At some point, we should convert it over. + sim_hw_objs="$sim_hw_objs dv-sockser.o" + +cat >>confdefs.h <<_ACEOF +#define HAVE_DV_SOCKSER 1 +_ACEOF + + ;; + esac + if test x"$silent" != x"yes"; then + echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs" + fi + case " $hardware " in + *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5 +$as_echo_n "checking for log2 in -lm... " >&6; } +if ${ac_cv_lib_m_log2+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char log2 (); +int +main () +{ +return log2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_log2=yes +else + ac_cv_lib_m_log2=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_log2" >&5 +$as_echo "$ac_cv_lib_m_log2" >&6; } +if test "x$ac_cv_lib_m_log2" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +fi +;; + esac +fi + + cgen_breaks="" if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then cgen_breaks="break cgen_rtx_error"; diff --git a/sim/h8300/ChangeLog b/sim/h8300/ChangeLog index 0a02c9c..c3daaf4 100644 --- a/sim/h8300/ChangeLog +++ b/sim/h8300/ChangeLog @@ -1,3 +1,7 @@ +2021-04-26 Mike Frysinger + + * aclocal.m4, config.in, configure: Regenerate. + 2021-04-22 Tom Tromey * configure, config.in: Rebuild. diff --git a/sim/h8300/aclocal.m4 b/sim/h8300/aclocal.m4 index ddeb1f5..4300d0e 100644 --- a/sim/h8300/aclocal.m4 +++ b/sim/h8300/aclocal.m4 @@ -115,6 +115,7 @@ m4_include([../m4/sim_ac_option_alignment.m4]) m4_include([../m4/sim_ac_option_assert.m4]) m4_include([../m4/sim_ac_option_endian.m4]) m4_include([../m4/sim_ac_option_environment.m4]) +m4_include([../m4/sim_ac_option_hardware.m4]) m4_include([../m4/sim_ac_option_inline.m4]) m4_include([../m4/sim_ac_option_warnings.m4]) m4_include([../m4/sim_ac_output.m4]) diff --git a/sim/h8300/config.in b/sim/h8300/config.in index fbed42a..505aa8c 100644 --- a/sim/h8300/config.in +++ b/sim/h8300/config.in @@ -13,6 +13,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H +/* Define if dv-sockser is usable. */ +#undef HAVE_DV_SOCKSER + /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H @@ -28,6 +31,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H +/* Define to 1 if you have the `m' library (-lm). */ +#undef HAVE_LIBM + /* Define to 1 if you have the `nsl' library (-lnsl). */ #undef HAVE_LIBNSL diff --git a/sim/h8300/configure b/sim/h8300/configure index 682019b..fd7bc25 100755 --- a/sim/h8300/configure +++ b/sim/h8300/configure @@ -634,9 +634,6 @@ ac_func_list= ac_subst_vars='LTLIBOBJS LIBOBJS sim_reserved_bits -sim_hw -sim_hw_objs -sim_hw_cflags sim_default_model sim_scache sim_float @@ -757,6 +754,9 @@ SHELL WERROR_CFLAGS WARN_CFLAGS sim_inline +sim_hw +sim_hw_objs +sim_hw_cflags sim_endian sim_alignment' ac_subst_files='' @@ -785,6 +785,7 @@ enable_sim_alignment enable_werror enable_build_warnings enable_sim_build_warnings +enable_sim_hardware ' ac_precious_vars='build_alias host_alias @@ -1444,6 +1445,8 @@ Optional Features: --enable-sim-build-warnings enable SIM specific build-time compiler warnings if gcc is used + --enable-sim-hardware=LIST + Specify the hardware to be included in the build. Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] @@ -11184,7 +11187,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11187 "configure" +#line 11190 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11290,7 +11293,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11293 "configure" +#line 11296 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12032,6 +12035,107 @@ fi +hardware="cfi core pal glue " +sim_hw_cflags="-DWITH_HW=1" +sim_hw="$hardware" +sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`" + +# Check whether --enable-sim-hardware was given. +if test "${enable_sim_hardware+set}" = set; then : + enableval=$enable_sim_hardware; +else + enable_sim_hardware="yes" +fi + +case ${enable_sim_hardware} in + yes|no) ;; + ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";; + *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";; + *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';; +esac + +if test "$enable_sim_hardware" = no; then + sim_hw_objs= + sim_hw_cflags="-DWITH_HW=0" + sim_hw= +else + sim_hw_cflags="-DWITH_HW=1" + # remove duplicates + sim_hw="" + sim_hw_objs="\$(SIM_COMMON_HW_OBJS)" + for i in $hardware ; do + case " $sim_hw " in + *" $i "*) ;; + *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";; + esac + done + # mingw does not support sockser + case ${host} in + *mingw*) ;; + *) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device + # that you instatiate. Instead, other code will call into it directly. + # At some point, we should convert it over. + sim_hw_objs="$sim_hw_objs dv-sockser.o" + +cat >>confdefs.h <<_ACEOF +#define HAVE_DV_SOCKSER 1 +_ACEOF + + ;; + esac + if test x"$silent" != x"yes"; then + echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs" + fi + case " $hardware " in + *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5 +$as_echo_n "checking for log2 in -lm... " >&6; } +if ${ac_cv_lib_m_log2+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char log2 (); +int +main () +{ +return log2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_log2=yes +else + ac_cv_lib_m_log2=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_log2" >&5 +$as_echo "$ac_cv_lib_m_log2" >&6; } +if test "x$ac_cv_lib_m_log2" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +fi +;; + esac +fi + + cgen_breaks="" if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then cgen_breaks="break cgen_rtx_error"; diff --git a/sim/iq2000/ChangeLog b/sim/iq2000/ChangeLog index addf3c6..ffb7ab9 100644 --- a/sim/iq2000/ChangeLog +++ b/sim/iq2000/ChangeLog @@ -1,3 +1,8 @@ +2021-04-26 Mike Frysinger + + * configure.ac (SIM_AC_OPTION_HARDWARE): Delete call. + * configure: Regenerate. + 2021-04-23 Mike Frysinger * configure.ac (SIM_AC_OPTION_HARDWARE): Delete arguments. diff --git a/sim/iq2000/configure b/sim/iq2000/configure index 21b500c..0607bc6 100755 --- a/sim/iq2000/configure +++ b/sim/iq2000/configure @@ -12210,7 +12210,6 @@ fi fi - cgen_breaks="" if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then cgen_breaks="break cgen_rtx_error"; diff --git a/sim/iq2000/configure.ac b/sim/iq2000/configure.ac index f21bc80..623fa19 100644 --- a/sim/iq2000/configure.ac +++ b/sim/iq2000/configure.ac @@ -11,6 +11,4 @@ SIM_AC_OPTION_DEFAULT_MODEL(iq2000) SIM_AC_OPTION_WARNINGS(no) SIM_AC_OPTION_CGEN_MAINT -SIM_AC_OPTION_HARDWARE - SIM_AC_OUTPUT diff --git a/sim/m32c/ChangeLog b/sim/m32c/ChangeLog index 2919dc4..c2991c6 100644 --- a/sim/m32c/ChangeLog +++ b/sim/m32c/ChangeLog @@ -1,3 +1,7 @@ +2021-04-26 Mike Frysinger + + * aclocal.m4, config.in, configure: Regenerate. + 2021-04-22 Tom Tromey * configure, config.in: Rebuild. diff --git a/sim/m32c/aclocal.m4 b/sim/m32c/aclocal.m4 index db8c5cd..ed05269 100644 --- a/sim/m32c/aclocal.m4 +++ b/sim/m32c/aclocal.m4 @@ -113,6 +113,7 @@ m4_include([../../lt~obsolete.m4]) m4_include([../m4/sim_ac_common.m4]) m4_include([../m4/sim_ac_option_assert.m4]) m4_include([../m4/sim_ac_option_environment.m4]) +m4_include([../m4/sim_ac_option_hardware.m4]) m4_include([../m4/sim_ac_option_inline.m4]) m4_include([../m4/sim_ac_option_warnings.m4]) m4_include([../m4/sim_ac_output.m4]) diff --git a/sim/m32c/config.in b/sim/m32c/config.in index aaa80a5..3b33610 100644 --- a/sim/m32c/config.in +++ b/sim/m32c/config.in @@ -13,6 +13,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H +/* Define if dv-sockser is usable. */ +#undef HAVE_DV_SOCKSER + /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H @@ -28,6 +31,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H +/* Define to 1 if you have the `m' library (-lm). */ +#undef HAVE_LIBM + /* Define to 1 if you have the `nsl' library (-lnsl). */ #undef HAVE_LIBNSL diff --git a/sim/m32c/configure b/sim/m32c/configure index 2e2ed73..c0fa44f 100755 --- a/sim/m32c/configure +++ b/sim/m32c/configure @@ -634,9 +634,6 @@ ac_func_list= ac_subst_vars='LTLIBOBJS LIBOBJS sim_reserved_bits -sim_hw -sim_hw_objs -sim_hw_cflags sim_default_model sim_scache sim_float @@ -758,7 +755,10 @@ PATH_SEPARATOR SHELL WERROR_CFLAGS WARN_CFLAGS -sim_inline' +sim_inline +sim_hw +sim_hw_objs +sim_hw_cflags' ac_subst_files='' ac_user_opts=' enable_option_checking @@ -783,6 +783,7 @@ with_bugurl enable_werror enable_build_warnings enable_sim_build_warnings +enable_sim_hardware ' ac_precious_vars='build_alias host_alias @@ -1437,6 +1438,8 @@ Optional Features: --enable-sim-build-warnings enable SIM specific build-time compiler warnings if gcc is used + --enable-sim-hardware=LIST + Specify the hardware to be included in the build. Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] @@ -11181,7 +11184,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11184 "configure" +#line 11187 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11287,7 +11290,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11290 "configure" +#line 11293 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11946,6 +11949,107 @@ fi +hardware="cfi core pal glue " +sim_hw_cflags="-DWITH_HW=1" +sim_hw="$hardware" +sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`" + +# Check whether --enable-sim-hardware was given. +if test "${enable_sim_hardware+set}" = set; then : + enableval=$enable_sim_hardware; +else + enable_sim_hardware="yes" +fi + +case ${enable_sim_hardware} in + yes|no) ;; + ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";; + *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";; + *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';; +esac + +if test "$enable_sim_hardware" = no; then + sim_hw_objs= + sim_hw_cflags="-DWITH_HW=0" + sim_hw= +else + sim_hw_cflags="-DWITH_HW=1" + # remove duplicates + sim_hw="" + sim_hw_objs="\$(SIM_COMMON_HW_OBJS)" + for i in $hardware ; do + case " $sim_hw " in + *" $i "*) ;; + *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";; + esac + done + # mingw does not support sockser + case ${host} in + *mingw*) ;; + *) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device + # that you instatiate. Instead, other code will call into it directly. + # At some point, we should convert it over. + sim_hw_objs="$sim_hw_objs dv-sockser.o" + +cat >>confdefs.h <<_ACEOF +#define HAVE_DV_SOCKSER 1 +_ACEOF + + ;; + esac + if test x"$silent" != x"yes"; then + echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs" + fi + case " $hardware " in + *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5 +$as_echo_n "checking for log2 in -lm... " >&6; } +if ${ac_cv_lib_m_log2+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char log2 (); +int +main () +{ +return log2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_log2=yes +else + ac_cv_lib_m_log2=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_log2" >&5 +$as_echo "$ac_cv_lib_m_log2" >&6; } +if test "x$ac_cv_lib_m_log2" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +fi +;; + esac +fi + + cgen_breaks="" if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then cgen_breaks="break cgen_rtx_error"; diff --git a/sim/m4/sim_ac_output.m4 b/sim/m4/sim_ac_output.m4 index 9ec566d..b18f254 100644 --- a/sim/m4/sim_ac_output.m4 +++ b/sim/m4/sim_ac_output.m4 @@ -22,6 +22,7 @@ dnl the target's fragment at the appropriate points. AC_DEFUN([SIM_AC_OUTPUT], [dnl AC_REQUIRE([SIM_AC_OPTION_WARNINGS])dnl +AC_REQUIRE([SIM_AC_OPTION_HARDWARE])dnl dnl Make @cgen_breaks@ non-null only if the sim uses CGEN. cgen_breaks="" diff --git a/sim/mcore/ChangeLog b/sim/mcore/ChangeLog index 9e700dc..815cd1a 100644 --- a/sim/mcore/ChangeLog +++ b/sim/mcore/ChangeLog @@ -1,3 +1,7 @@ +2021-04-26 Mike Frysinger + + * aclocal.m4, config.in, configure: Regenerate. + 2021-04-22 Tom Tromey * configure, config.in: Rebuild. diff --git a/sim/mcore/aclocal.m4 b/sim/mcore/aclocal.m4 index ddeb1f5..4300d0e 100644 --- a/sim/mcore/aclocal.m4 +++ b/sim/mcore/aclocal.m4 @@ -115,6 +115,7 @@ m4_include([../m4/sim_ac_option_alignment.m4]) m4_include([../m4/sim_ac_option_assert.m4]) m4_include([../m4/sim_ac_option_endian.m4]) m4_include([../m4/sim_ac_option_environment.m4]) +m4_include([../m4/sim_ac_option_hardware.m4]) m4_include([../m4/sim_ac_option_inline.m4]) m4_include([../m4/sim_ac_option_warnings.m4]) m4_include([../m4/sim_ac_output.m4]) diff --git a/sim/mcore/config.in b/sim/mcore/config.in index 2416b7f..8d37b72 100644 --- a/sim/mcore/config.in +++ b/sim/mcore/config.in @@ -13,6 +13,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H +/* Define if dv-sockser is usable. */ +#undef HAVE_DV_SOCKSER + /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H @@ -28,6 +31,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H +/* Define to 1 if you have the `m' library (-lm). */ +#undef HAVE_LIBM + /* Define to 1 if you have the `nsl' library (-lnsl). */ #undef HAVE_LIBNSL diff --git a/sim/mcore/configure b/sim/mcore/configure index 25f04f5..afd78ba 100755 --- a/sim/mcore/configure +++ b/sim/mcore/configure @@ -634,9 +634,6 @@ ac_func_list= ac_subst_vars='LTLIBOBJS LIBOBJS sim_reserved_bits -sim_hw -sim_hw_objs -sim_hw_cflags sim_default_model sim_scache sim_float @@ -757,6 +754,9 @@ SHELL WERROR_CFLAGS WARN_CFLAGS sim_inline +sim_hw +sim_hw_objs +sim_hw_cflags sim_endian sim_alignment' ac_subst_files='' @@ -785,6 +785,7 @@ enable_sim_alignment enable_werror enable_build_warnings enable_sim_build_warnings +enable_sim_hardware ' ac_precious_vars='build_alias host_alias @@ -1444,6 +1445,8 @@ Optional Features: --enable-sim-build-warnings enable SIM specific build-time compiler warnings if gcc is used + --enable-sim-hardware=LIST + Specify the hardware to be included in the build. Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] @@ -11183,7 +11186,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11186 "configure" +#line 11189 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11289,7 +11292,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11292 "configure" +#line 11295 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12027,6 +12030,107 @@ fi +hardware="cfi core pal glue " +sim_hw_cflags="-DWITH_HW=1" +sim_hw="$hardware" +sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`" + +# Check whether --enable-sim-hardware was given. +if test "${enable_sim_hardware+set}" = set; then : + enableval=$enable_sim_hardware; +else + enable_sim_hardware="yes" +fi + +case ${enable_sim_hardware} in + yes|no) ;; + ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";; + *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";; + *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';; +esac + +if test "$enable_sim_hardware" = no; then + sim_hw_objs= + sim_hw_cflags="-DWITH_HW=0" + sim_hw= +else + sim_hw_cflags="-DWITH_HW=1" + # remove duplicates + sim_hw="" + sim_hw_objs="\$(SIM_COMMON_HW_OBJS)" + for i in $hardware ; do + case " $sim_hw " in + *" $i "*) ;; + *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";; + esac + done + # mingw does not support sockser + case ${host} in + *mingw*) ;; + *) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device + # that you instatiate. Instead, other code will call into it directly. + # At some point, we should convert it over. + sim_hw_objs="$sim_hw_objs dv-sockser.o" + +cat >>confdefs.h <<_ACEOF +#define HAVE_DV_SOCKSER 1 +_ACEOF + + ;; + esac + if test x"$silent" != x"yes"; then + echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs" + fi + case " $hardware " in + *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5 +$as_echo_n "checking for log2 in -lm... " >&6; } +if ${ac_cv_lib_m_log2+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char log2 (); +int +main () +{ +return log2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_log2=yes +else + ac_cv_lib_m_log2=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_log2" >&5 +$as_echo "$ac_cv_lib_m_log2" >&6; } +if test "x$ac_cv_lib_m_log2" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +fi +;; + esac +fi + + cgen_breaks="" if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then cgen_breaks="break cgen_rtx_error"; diff --git a/sim/microblaze/ChangeLog b/sim/microblaze/ChangeLog index 089c15a..5d6957b 100644 --- a/sim/microblaze/ChangeLog +++ b/sim/microblaze/ChangeLog @@ -1,3 +1,7 @@ +2021-04-26 Mike Frysinger + + * aclocal.m4, config.in, configure: Regenerate. + 2021-04-22 Tom Tromey * configure, config.in: Rebuild. diff --git a/sim/microblaze/aclocal.m4 b/sim/microblaze/aclocal.m4 index ddeb1f5..4300d0e 100644 --- a/sim/microblaze/aclocal.m4 +++ b/sim/microblaze/aclocal.m4 @@ -115,6 +115,7 @@ m4_include([../m4/sim_ac_option_alignment.m4]) m4_include([../m4/sim_ac_option_assert.m4]) m4_include([../m4/sim_ac_option_endian.m4]) m4_include([../m4/sim_ac_option_environment.m4]) +m4_include([../m4/sim_ac_option_hardware.m4]) m4_include([../m4/sim_ac_option_inline.m4]) m4_include([../m4/sim_ac_option_warnings.m4]) m4_include([../m4/sim_ac_output.m4]) diff --git a/sim/microblaze/config.in b/sim/microblaze/config.in index 2416b7f..8d37b72 100644 --- a/sim/microblaze/config.in +++ b/sim/microblaze/config.in @@ -13,6 +13,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H +/* Define if dv-sockser is usable. */ +#undef HAVE_DV_SOCKSER + /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H @@ -28,6 +31,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H +/* Define to 1 if you have the `m' library (-lm). */ +#undef HAVE_LIBM + /* Define to 1 if you have the `nsl' library (-lnsl). */ #undef HAVE_LIBNSL diff --git a/sim/microblaze/configure b/sim/microblaze/configure index 2a74bb7..8cabf92 100755 --- a/sim/microblaze/configure +++ b/sim/microblaze/configure @@ -634,9 +634,6 @@ ac_func_list= ac_subst_vars='LTLIBOBJS LIBOBJS sim_reserved_bits -sim_hw -sim_hw_objs -sim_hw_cflags sim_default_model sim_scache sim_float @@ -757,6 +754,9 @@ SHELL WERROR_CFLAGS WARN_CFLAGS sim_inline +sim_hw +sim_hw_objs +sim_hw_cflags sim_endian sim_alignment' ac_subst_files='' @@ -785,6 +785,7 @@ enable_sim_alignment enable_werror enable_build_warnings enable_sim_build_warnings +enable_sim_hardware ' ac_precious_vars='build_alias host_alias @@ -1444,6 +1445,8 @@ Optional Features: --enable-sim-build-warnings enable SIM specific build-time compiler warnings if gcc is used + --enable-sim-hardware=LIST + Specify the hardware to be included in the build. Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] @@ -11183,7 +11186,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11186 "configure" +#line 11189 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11289,7 +11292,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11292 "configure" +#line 11295 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12030,6 +12033,107 @@ fi +hardware="cfi core pal glue " +sim_hw_cflags="-DWITH_HW=1" +sim_hw="$hardware" +sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`" + +# Check whether --enable-sim-hardware was given. +if test "${enable_sim_hardware+set}" = set; then : + enableval=$enable_sim_hardware; +else + enable_sim_hardware="yes" +fi + +case ${enable_sim_hardware} in + yes|no) ;; + ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";; + *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";; + *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';; +esac + +if test "$enable_sim_hardware" = no; then + sim_hw_objs= + sim_hw_cflags="-DWITH_HW=0" + sim_hw= +else + sim_hw_cflags="-DWITH_HW=1" + # remove duplicates + sim_hw="" + sim_hw_objs="\$(SIM_COMMON_HW_OBJS)" + for i in $hardware ; do + case " $sim_hw " in + *" $i "*) ;; + *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";; + esac + done + # mingw does not support sockser + case ${host} in + *mingw*) ;; + *) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device + # that you instatiate. Instead, other code will call into it directly. + # At some point, we should convert it over. + sim_hw_objs="$sim_hw_objs dv-sockser.o" + +cat >>confdefs.h <<_ACEOF +#define HAVE_DV_SOCKSER 1 +_ACEOF + + ;; + esac + if test x"$silent" != x"yes"; then + echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs" + fi + case " $hardware " in + *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5 +$as_echo_n "checking for log2 in -lm... " >&6; } +if ${ac_cv_lib_m_log2+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char log2 (); +int +main () +{ +return log2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_log2=yes +else + ac_cv_lib_m_log2=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_log2" >&5 +$as_echo "$ac_cv_lib_m_log2" >&6; } +if test "x$ac_cv_lib_m_log2" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +fi +;; + esac +fi + + cgen_breaks="" if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then cgen_breaks="break cgen_rtx_error"; diff --git a/sim/moxie/ChangeLog b/sim/moxie/ChangeLog index ff2b8eb..3e74d3f 100644 --- a/sim/moxie/ChangeLog +++ b/sim/moxie/ChangeLog @@ -1,3 +1,7 @@ +2021-04-26 Mike Frysinger + + * aclocal.m4, config.in, configure: Regenerate. + 2021-04-22 Tom Tromey * configure, config.in: Rebuild. diff --git a/sim/moxie/aclocal.m4 b/sim/moxie/aclocal.m4 index ddeb1f5..4300d0e 100644 --- a/sim/moxie/aclocal.m4 +++ b/sim/moxie/aclocal.m4 @@ -115,6 +115,7 @@ m4_include([../m4/sim_ac_option_alignment.m4]) m4_include([../m4/sim_ac_option_assert.m4]) m4_include([../m4/sim_ac_option_endian.m4]) m4_include([../m4/sim_ac_option_environment.m4]) +m4_include([../m4/sim_ac_option_hardware.m4]) m4_include([../m4/sim_ac_option_inline.m4]) m4_include([../m4/sim_ac_option_warnings.m4]) m4_include([../m4/sim_ac_output.m4]) diff --git a/sim/moxie/config.in b/sim/moxie/config.in index 2416b7f..8d37b72 100644 --- a/sim/moxie/config.in +++ b/sim/moxie/config.in @@ -13,6 +13,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H +/* Define if dv-sockser is usable. */ +#undef HAVE_DV_SOCKSER + /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H @@ -28,6 +31,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H +/* Define to 1 if you have the `m' library (-lm). */ +#undef HAVE_LIBM + /* Define to 1 if you have the `nsl' library (-lnsl). */ #undef HAVE_LIBNSL diff --git a/sim/moxie/configure b/sim/moxie/configure index 23e04ba..0314c64 100755 --- a/sim/moxie/configure +++ b/sim/moxie/configure @@ -634,9 +634,6 @@ ac_func_list= ac_subst_vars='LTLIBOBJS LIBOBJS sim_reserved_bits -sim_hw -sim_hw_objs -sim_hw_cflags sim_default_model sim_scache sim_float @@ -758,6 +755,9 @@ SHELL WERROR_CFLAGS WARN_CFLAGS sim_inline +sim_hw +sim_hw_objs +sim_hw_cflags sim_endian sim_alignment' ac_subst_files='' @@ -786,6 +786,7 @@ enable_sim_alignment enable_werror enable_build_warnings enable_sim_build_warnings +enable_sim_hardware ' ac_precious_vars='build_alias host_alias @@ -1445,6 +1446,8 @@ Optional Features: --enable-sim-build-warnings enable SIM specific build-time compiler warnings if gcc is used + --enable-sim-hardware=LIST + Specify the hardware to be included in the build. Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] @@ -11184,7 +11187,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11187 "configure" +#line 11190 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11290,7 +11293,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11293 "configure" +#line 11296 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12124,6 +12127,107 @@ $as_echo "${WARN_CFLAGS} ${WERROR_CFLAGS}" >&6; } fi +hardware="cfi core pal glue " +sim_hw_cflags="-DWITH_HW=1" +sim_hw="$hardware" +sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`" + +# Check whether --enable-sim-hardware was given. +if test "${enable_sim_hardware+set}" = set; then : + enableval=$enable_sim_hardware; +else + enable_sim_hardware="yes" +fi + +case ${enable_sim_hardware} in + yes|no) ;; + ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";; + *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";; + *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';; +esac + +if test "$enable_sim_hardware" = no; then + sim_hw_objs= + sim_hw_cflags="-DWITH_HW=0" + sim_hw= +else + sim_hw_cflags="-DWITH_HW=1" + # remove duplicates + sim_hw="" + sim_hw_objs="\$(SIM_COMMON_HW_OBJS)" + for i in $hardware ; do + case " $sim_hw " in + *" $i "*) ;; + *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";; + esac + done + # mingw does not support sockser + case ${host} in + *mingw*) ;; + *) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device + # that you instatiate. Instead, other code will call into it directly. + # At some point, we should convert it over. + sim_hw_objs="$sim_hw_objs dv-sockser.o" + +cat >>confdefs.h <<_ACEOF +#define HAVE_DV_SOCKSER 1 +_ACEOF + + ;; + esac + if test x"$silent" != x"yes"; then + echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs" + fi + case " $hardware " in + *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5 +$as_echo_n "checking for log2 in -lm... " >&6; } +if ${ac_cv_lib_m_log2+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char log2 (); +int +main () +{ +return log2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_log2=yes +else + ac_cv_lib_m_log2=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_log2" >&5 +$as_echo "$ac_cv_lib_m_log2" >&6; } +if test "x$ac_cv_lib_m_log2" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +fi +;; + esac +fi + + cgen_breaks="" if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then cgen_breaks="break cgen_rtx_error"; diff --git a/sim/msp430/ChangeLog b/sim/msp430/ChangeLog index ed87e9f..3d14ecb 100644 --- a/sim/msp430/ChangeLog +++ b/sim/msp430/ChangeLog @@ -1,3 +1,7 @@ +2021-04-26 Mike Frysinger + + * aclocal.m4, config.in, configure: Regenerate. + 2021-04-22 Tom Tromey * configure, config.in: Rebuild. diff --git a/sim/msp430/aclocal.m4 b/sim/msp430/aclocal.m4 index ddeb1f5..4300d0e 100644 --- a/sim/msp430/aclocal.m4 +++ b/sim/msp430/aclocal.m4 @@ -115,6 +115,7 @@ m4_include([../m4/sim_ac_option_alignment.m4]) m4_include([../m4/sim_ac_option_assert.m4]) m4_include([../m4/sim_ac_option_endian.m4]) m4_include([../m4/sim_ac_option_environment.m4]) +m4_include([../m4/sim_ac_option_hardware.m4]) m4_include([../m4/sim_ac_option_inline.m4]) m4_include([../m4/sim_ac_option_warnings.m4]) m4_include([../m4/sim_ac_output.m4]) diff --git a/sim/msp430/config.in b/sim/msp430/config.in index 2416b7f..8d37b72 100644 --- a/sim/msp430/config.in +++ b/sim/msp430/config.in @@ -13,6 +13,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H +/* Define if dv-sockser is usable. */ +#undef HAVE_DV_SOCKSER + /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H @@ -28,6 +31,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H +/* Define to 1 if you have the `m' library (-lm). */ +#undef HAVE_LIBM + /* Define to 1 if you have the `nsl' library (-lnsl). */ #undef HAVE_LIBNSL diff --git a/sim/msp430/configure b/sim/msp430/configure index ae50e46..5c43b29 100755 --- a/sim/msp430/configure +++ b/sim/msp430/configure @@ -634,9 +634,6 @@ ac_func_list= ac_subst_vars='LTLIBOBJS LIBOBJS sim_reserved_bits -sim_hw -sim_hw_objs -sim_hw_cflags sim_default_model sim_scache sim_float @@ -757,6 +754,9 @@ SHELL WERROR_CFLAGS WARN_CFLAGS sim_inline +sim_hw +sim_hw_objs +sim_hw_cflags sim_endian sim_alignment' ac_subst_files='' @@ -785,6 +785,7 @@ enable_sim_alignment enable_werror enable_build_warnings enable_sim_build_warnings +enable_sim_hardware ' ac_precious_vars='build_alias host_alias @@ -1444,6 +1445,8 @@ Optional Features: --enable-sim-build-warnings enable SIM specific build-time compiler warnings if gcc is used + --enable-sim-hardware=LIST + Specify the hardware to be included in the build. Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] @@ -11183,7 +11186,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11186 "configure" +#line 11189 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11289,7 +11292,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11292 "configure" +#line 11295 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12030,6 +12033,107 @@ fi +hardware="cfi core pal glue " +sim_hw_cflags="-DWITH_HW=1" +sim_hw="$hardware" +sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`" + +# Check whether --enable-sim-hardware was given. +if test "${enable_sim_hardware+set}" = set; then : + enableval=$enable_sim_hardware; +else + enable_sim_hardware="yes" +fi + +case ${enable_sim_hardware} in + yes|no) ;; + ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";; + *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";; + *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';; +esac + +if test "$enable_sim_hardware" = no; then + sim_hw_objs= + sim_hw_cflags="-DWITH_HW=0" + sim_hw= +else + sim_hw_cflags="-DWITH_HW=1" + # remove duplicates + sim_hw="" + sim_hw_objs="\$(SIM_COMMON_HW_OBJS)" + for i in $hardware ; do + case " $sim_hw " in + *" $i "*) ;; + *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";; + esac + done + # mingw does not support sockser + case ${host} in + *mingw*) ;; + *) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device + # that you instatiate. Instead, other code will call into it directly. + # At some point, we should convert it over. + sim_hw_objs="$sim_hw_objs dv-sockser.o" + +cat >>confdefs.h <<_ACEOF +#define HAVE_DV_SOCKSER 1 +_ACEOF + + ;; + esac + if test x"$silent" != x"yes"; then + echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs" + fi + case " $hardware " in + *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5 +$as_echo_n "checking for log2 in -lm... " >&6; } +if ${ac_cv_lib_m_log2+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char log2 (); +int +main () +{ +return log2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_log2=yes +else + ac_cv_lib_m_log2=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_log2" >&5 +$as_echo "$ac_cv_lib_m_log2" >&6; } +if test "x$ac_cv_lib_m_log2" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +fi +;; + esac +fi + + cgen_breaks="" if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then cgen_breaks="break cgen_rtx_error"; diff --git a/sim/or1k/ChangeLog b/sim/or1k/ChangeLog index b4404f0..dd34d45 100644 --- a/sim/or1k/ChangeLog +++ b/sim/or1k/ChangeLog @@ -1,3 +1,7 @@ +2021-04-26 Mike Frysinger + + * aclocal.m4, config.in, configure: Regenerate. + 2021-04-22 Tom Tromey * configure, config.in: Rebuild. diff --git a/sim/or1k/aclocal.m4 b/sim/or1k/aclocal.m4 index 73a795c..e1659b4 100644 --- a/sim/or1k/aclocal.m4 +++ b/sim/or1k/aclocal.m4 @@ -118,6 +118,7 @@ m4_include([../m4/sim_ac_option_cgen_maint.m4]) m4_include([../m4/sim_ac_option_default_model.m4]) m4_include([../m4/sim_ac_option_endian.m4]) m4_include([../m4/sim_ac_option_environment.m4]) +m4_include([../m4/sim_ac_option_hardware.m4]) m4_include([../m4/sim_ac_option_inline.m4]) m4_include([../m4/sim_ac_option_scache.m4]) m4_include([../m4/sim_ac_option_warnings.m4]) diff --git a/sim/or1k/config.in b/sim/or1k/config.in index 2416b7f..8d37b72 100644 --- a/sim/or1k/config.in +++ b/sim/or1k/config.in @@ -13,6 +13,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H +/* Define if dv-sockser is usable. */ +#undef HAVE_DV_SOCKSER + /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H @@ -28,6 +31,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H +/* Define to 1 if you have the `m' library (-lm). */ +#undef HAVE_LIBM + /* Define to 1 if you have the `nsl' library (-lnsl). */ #undef HAVE_LIBNSL diff --git a/sim/or1k/configure b/sim/or1k/configure index 4a7f8be..9e2040e 100755 --- a/sim/or1k/configure +++ b/sim/or1k/configure @@ -634,9 +634,6 @@ ac_func_list= ac_subst_vars='LTLIBOBJS LIBOBJS sim_reserved_bits -sim_hw -sim_hw_objs -sim_hw_cflags sim_float cgen_breaks cgen @@ -758,6 +755,9 @@ WERROR_CFLAGS WARN_CFLAGS sim_scache sim_inline +sim_hw +sim_hw_objs +sim_hw_cflags sim_endian sim_default_model sim_bitsize @@ -792,6 +792,7 @@ enable_werror enable_build_warnings enable_sim_build_warnings enable_cgen_maint +enable_sim_hardware ' ac_precious_vars='build_alias host_alias @@ -1457,6 +1458,8 @@ Optional Features: enable SIM specific build-time compiler warnings if gcc is used --enable-cgen-maint=DIR build cgen generated files + --enable-sim-hardware=LIST + Specify the hardware to be included in the build. Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] @@ -11196,7 +11199,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11199 "configure" +#line 11202 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11302,7 +11305,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11305 "configure" +#line 11308 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12189,6 +12192,107 @@ fi +hardware="cfi core pal glue " +sim_hw_cflags="-DWITH_HW=1" +sim_hw="$hardware" +sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`" + +# Check whether --enable-sim-hardware was given. +if test "${enable_sim_hardware+set}" = set; then : + enableval=$enable_sim_hardware; +else + enable_sim_hardware="yes" +fi + +case ${enable_sim_hardware} in + yes|no) ;; + ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";; + *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";; + *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';; +esac + +if test "$enable_sim_hardware" = no; then + sim_hw_objs= + sim_hw_cflags="-DWITH_HW=0" + sim_hw= +else + sim_hw_cflags="-DWITH_HW=1" + # remove duplicates + sim_hw="" + sim_hw_objs="\$(SIM_COMMON_HW_OBJS)" + for i in $hardware ; do + case " $sim_hw " in + *" $i "*) ;; + *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";; + esac + done + # mingw does not support sockser + case ${host} in + *mingw*) ;; + *) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device + # that you instatiate. Instead, other code will call into it directly. + # At some point, we should convert it over. + sim_hw_objs="$sim_hw_objs dv-sockser.o" + +cat >>confdefs.h <<_ACEOF +#define HAVE_DV_SOCKSER 1 +_ACEOF + + ;; + esac + if test x"$silent" != x"yes"; then + echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs" + fi + case " $hardware " in + *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5 +$as_echo_n "checking for log2 in -lm... " >&6; } +if ${ac_cv_lib_m_log2+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char log2 (); +int +main () +{ +return log2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_log2=yes +else + ac_cv_lib_m_log2=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_log2" >&5 +$as_echo "$ac_cv_lib_m_log2" >&6; } +if test "x$ac_cv_lib_m_log2" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +fi +;; + esac +fi + + cgen_breaks="" if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then cgen_breaks="break cgen_rtx_error"; diff --git a/sim/pru/ChangeLog b/sim/pru/ChangeLog index 833dcc5..926fe2d 100644 --- a/sim/pru/ChangeLog +++ b/sim/pru/ChangeLog @@ -1,3 +1,7 @@ +2021-04-26 Mike Frysinger + + * aclocal.m4, config.in, configure: Regenerate. + 2021-04-22 Tom Tromey * configure, config.in: Rebuild. diff --git a/sim/pru/aclocal.m4 b/sim/pru/aclocal.m4 index ddeb1f5..4300d0e 100644 --- a/sim/pru/aclocal.m4 +++ b/sim/pru/aclocal.m4 @@ -115,6 +115,7 @@ m4_include([../m4/sim_ac_option_alignment.m4]) m4_include([../m4/sim_ac_option_assert.m4]) m4_include([../m4/sim_ac_option_endian.m4]) m4_include([../m4/sim_ac_option_environment.m4]) +m4_include([../m4/sim_ac_option_hardware.m4]) m4_include([../m4/sim_ac_option_inline.m4]) m4_include([../m4/sim_ac_option_warnings.m4]) m4_include([../m4/sim_ac_output.m4]) diff --git a/sim/pru/config.in b/sim/pru/config.in index 2416b7f..8d37b72 100644 --- a/sim/pru/config.in +++ b/sim/pru/config.in @@ -13,6 +13,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H +/* Define if dv-sockser is usable. */ +#undef HAVE_DV_SOCKSER + /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H @@ -28,6 +31,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H +/* Define to 1 if you have the `m' library (-lm). */ +#undef HAVE_LIBM + /* Define to 1 if you have the `nsl' library (-lnsl). */ #undef HAVE_LIBNSL diff --git a/sim/pru/configure b/sim/pru/configure index ae50e46..5c43b29 100755 --- a/sim/pru/configure +++ b/sim/pru/configure @@ -634,9 +634,6 @@ ac_func_list= ac_subst_vars='LTLIBOBJS LIBOBJS sim_reserved_bits -sim_hw -sim_hw_objs -sim_hw_cflags sim_default_model sim_scache sim_float @@ -757,6 +754,9 @@ SHELL WERROR_CFLAGS WARN_CFLAGS sim_inline +sim_hw +sim_hw_objs +sim_hw_cflags sim_endian sim_alignment' ac_subst_files='' @@ -785,6 +785,7 @@ enable_sim_alignment enable_werror enable_build_warnings enable_sim_build_warnings +enable_sim_hardware ' ac_precious_vars='build_alias host_alias @@ -1444,6 +1445,8 @@ Optional Features: --enable-sim-build-warnings enable SIM specific build-time compiler warnings if gcc is used + --enable-sim-hardware=LIST + Specify the hardware to be included in the build. Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] @@ -11183,7 +11186,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11186 "configure" +#line 11189 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11289,7 +11292,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11292 "configure" +#line 11295 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12030,6 +12033,107 @@ fi +hardware="cfi core pal glue " +sim_hw_cflags="-DWITH_HW=1" +sim_hw="$hardware" +sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`" + +# Check whether --enable-sim-hardware was given. +if test "${enable_sim_hardware+set}" = set; then : + enableval=$enable_sim_hardware; +else + enable_sim_hardware="yes" +fi + +case ${enable_sim_hardware} in + yes|no) ;; + ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";; + *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";; + *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';; +esac + +if test "$enable_sim_hardware" = no; then + sim_hw_objs= + sim_hw_cflags="-DWITH_HW=0" + sim_hw= +else + sim_hw_cflags="-DWITH_HW=1" + # remove duplicates + sim_hw="" + sim_hw_objs="\$(SIM_COMMON_HW_OBJS)" + for i in $hardware ; do + case " $sim_hw " in + *" $i "*) ;; + *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";; + esac + done + # mingw does not support sockser + case ${host} in + *mingw*) ;; + *) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device + # that you instatiate. Instead, other code will call into it directly. + # At some point, we should convert it over. + sim_hw_objs="$sim_hw_objs dv-sockser.o" + +cat >>confdefs.h <<_ACEOF +#define HAVE_DV_SOCKSER 1 +_ACEOF + + ;; + esac + if test x"$silent" != x"yes"; then + echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs" + fi + case " $hardware " in + *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5 +$as_echo_n "checking for log2 in -lm... " >&6; } +if ${ac_cv_lib_m_log2+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char log2 (); +int +main () +{ +return log2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_log2=yes +else + ac_cv_lib_m_log2=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_log2" >&5 +$as_echo "$ac_cv_lib_m_log2" >&6; } +if test "x$ac_cv_lib_m_log2" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +fi +;; + esac +fi + + cgen_breaks="" if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then cgen_breaks="break cgen_rtx_error"; diff --git a/sim/riscv/ChangeLog b/sim/riscv/ChangeLog index 90abdf9..0993913 100644 --- a/sim/riscv/ChangeLog +++ b/sim/riscv/ChangeLog @@ -1,3 +1,7 @@ +2021-04-26 Mike Frysinger + + * aclocal.m4, config.in, configure: Regenerate. + 2021-04-22 Tom Tromey * configure, config.in: Rebuild. diff --git a/sim/riscv/aclocal.m4 b/sim/riscv/aclocal.m4 index bc1ef46..9710f3f 100644 --- a/sim/riscv/aclocal.m4 +++ b/sim/riscv/aclocal.m4 @@ -117,6 +117,7 @@ m4_include([../m4/sim_ac_option_bitsize.m4]) m4_include([../m4/sim_ac_option_default_model.m4]) m4_include([../m4/sim_ac_option_endian.m4]) m4_include([../m4/sim_ac_option_environment.m4]) +m4_include([../m4/sim_ac_option_hardware.m4]) m4_include([../m4/sim_ac_option_inline.m4]) m4_include([../m4/sim_ac_option_warnings.m4]) m4_include([../m4/sim_ac_output.m4]) diff --git a/sim/riscv/config.in b/sim/riscv/config.in index 2416b7f..8d37b72 100644 --- a/sim/riscv/config.in +++ b/sim/riscv/config.in @@ -13,6 +13,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H +/* Define if dv-sockser is usable. */ +#undef HAVE_DV_SOCKSER + /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H @@ -28,6 +31,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H +/* Define to 1 if you have the `m' library (-lm). */ +#undef HAVE_LIBM + /* Define to 1 if you have the `nsl' library (-lnsl). */ #undef HAVE_LIBNSL diff --git a/sim/riscv/configure b/sim/riscv/configure index 29f0c4ca..96f4fff 100755 --- a/sim/riscv/configure +++ b/sim/riscv/configure @@ -634,9 +634,6 @@ ac_func_list= ac_subst_vars='LTLIBOBJS LIBOBJS sim_reserved_bits -sim_hw -sim_hw_objs -sim_hw_cflags sim_scache sim_float cgen_breaks @@ -755,6 +752,9 @@ SHELL WERROR_CFLAGS WARN_CFLAGS sim_inline +sim_hw +sim_hw_objs +sim_hw_cflags sim_endian sim_default_model sim_bitsize @@ -787,6 +787,7 @@ enable_build_warnings enable_sim_build_warnings enable_sim_default_model enable_sim_bitsize +enable_sim_hardware ' ac_precious_vars='build_alias host_alias @@ -1449,6 +1450,8 @@ Optional Features: --enable-sim-default-model=model Specify default model to simulate --enable-sim-bitsize=N Specify target bitsize (32 or 64) + --enable-sim-hardware=LIST + Specify the hardware to be included in the build. Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] @@ -11188,7 +11191,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11191 "configure" +#line 11194 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11294,7 +11297,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11297 "configure" +#line 11300 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12146,6 +12149,107 @@ fi +hardware="cfi core pal glue " +sim_hw_cflags="-DWITH_HW=1" +sim_hw="$hardware" +sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`" + +# Check whether --enable-sim-hardware was given. +if test "${enable_sim_hardware+set}" = set; then : + enableval=$enable_sim_hardware; +else + enable_sim_hardware="yes" +fi + +case ${enable_sim_hardware} in + yes|no) ;; + ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";; + *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";; + *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';; +esac + +if test "$enable_sim_hardware" = no; then + sim_hw_objs= + sim_hw_cflags="-DWITH_HW=0" + sim_hw= +else + sim_hw_cflags="-DWITH_HW=1" + # remove duplicates + sim_hw="" + sim_hw_objs="\$(SIM_COMMON_HW_OBJS)" + for i in $hardware ; do + case " $sim_hw " in + *" $i "*) ;; + *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";; + esac + done + # mingw does not support sockser + case ${host} in + *mingw*) ;; + *) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device + # that you instatiate. Instead, other code will call into it directly. + # At some point, we should convert it over. + sim_hw_objs="$sim_hw_objs dv-sockser.o" + +cat >>confdefs.h <<_ACEOF +#define HAVE_DV_SOCKSER 1 +_ACEOF + + ;; + esac + if test x"$silent" != x"yes"; then + echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs" + fi + case " $hardware " in + *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5 +$as_echo_n "checking for log2 in -lm... " >&6; } +if ${ac_cv_lib_m_log2+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char log2 (); +int +main () +{ +return log2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_log2=yes +else + ac_cv_lib_m_log2=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_log2" >&5 +$as_echo "$ac_cv_lib_m_log2" >&6; } +if test "x$ac_cv_lib_m_log2" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +fi +;; + esac +fi + + cgen_breaks="" if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then cgen_breaks="break cgen_rtx_error"; diff --git a/sim/rl78/ChangeLog b/sim/rl78/ChangeLog index b8d10b6..4adb625 100644 --- a/sim/rl78/ChangeLog +++ b/sim/rl78/ChangeLog @@ -1,3 +1,7 @@ +2021-04-26 Mike Frysinger + + * aclocal.m4, config.in, configure: Regenerate. + 2021-04-22 Tom Tromey * configure, config.in: Rebuild. diff --git a/sim/rl78/aclocal.m4 b/sim/rl78/aclocal.m4 index db8c5cd..ed05269 100644 --- a/sim/rl78/aclocal.m4 +++ b/sim/rl78/aclocal.m4 @@ -113,6 +113,7 @@ m4_include([../../lt~obsolete.m4]) m4_include([../m4/sim_ac_common.m4]) m4_include([../m4/sim_ac_option_assert.m4]) m4_include([../m4/sim_ac_option_environment.m4]) +m4_include([../m4/sim_ac_option_hardware.m4]) m4_include([../m4/sim_ac_option_inline.m4]) m4_include([../m4/sim_ac_option_warnings.m4]) m4_include([../m4/sim_ac_output.m4]) diff --git a/sim/rl78/config.in b/sim/rl78/config.in index 2416b7f..8d37b72 100644 --- a/sim/rl78/config.in +++ b/sim/rl78/config.in @@ -13,6 +13,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H +/* Define if dv-sockser is usable. */ +#undef HAVE_DV_SOCKSER + /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H @@ -28,6 +31,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H +/* Define to 1 if you have the `m' library (-lm). */ +#undef HAVE_LIBM + /* Define to 1 if you have the `nsl' library (-lnsl). */ #undef HAVE_LIBNSL diff --git a/sim/rl78/configure b/sim/rl78/configure index a53a2b4..0a61270 100755 --- a/sim/rl78/configure +++ b/sim/rl78/configure @@ -634,9 +634,6 @@ ac_func_list= ac_subst_vars='LTLIBOBJS LIBOBJS sim_reserved_bits -sim_hw -sim_hw_objs -sim_hw_cflags sim_default_model sim_scache sim_float @@ -758,7 +755,10 @@ PATH_SEPARATOR SHELL WERROR_CFLAGS WARN_CFLAGS -sim_inline' +sim_inline +sim_hw +sim_hw_objs +sim_hw_cflags' ac_subst_files='' ac_user_opts=' enable_option_checking @@ -783,6 +783,7 @@ with_bugurl enable_werror enable_build_warnings enable_sim_build_warnings +enable_sim_hardware ' ac_precious_vars='build_alias host_alias @@ -1437,6 +1438,8 @@ Optional Features: --enable-sim-build-warnings enable SIM specific build-time compiler warnings if gcc is used + --enable-sim-hardware=LIST + Specify the hardware to be included in the build. Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] @@ -11176,7 +11179,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11179 "configure" +#line 11182 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11282,7 +11285,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11285 "configure" +#line 11288 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11928,6 +11931,107 @@ fi +hardware="cfi core pal glue " +sim_hw_cflags="-DWITH_HW=1" +sim_hw="$hardware" +sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`" + +# Check whether --enable-sim-hardware was given. +if test "${enable_sim_hardware+set}" = set; then : + enableval=$enable_sim_hardware; +else + enable_sim_hardware="yes" +fi + +case ${enable_sim_hardware} in + yes|no) ;; + ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";; + *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";; + *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';; +esac + +if test "$enable_sim_hardware" = no; then + sim_hw_objs= + sim_hw_cflags="-DWITH_HW=0" + sim_hw= +else + sim_hw_cflags="-DWITH_HW=1" + # remove duplicates + sim_hw="" + sim_hw_objs="\$(SIM_COMMON_HW_OBJS)" + for i in $hardware ; do + case " $sim_hw " in + *" $i "*) ;; + *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";; + esac + done + # mingw does not support sockser + case ${host} in + *mingw*) ;; + *) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device + # that you instatiate. Instead, other code will call into it directly. + # At some point, we should convert it over. + sim_hw_objs="$sim_hw_objs dv-sockser.o" + +cat >>confdefs.h <<_ACEOF +#define HAVE_DV_SOCKSER 1 +_ACEOF + + ;; + esac + if test x"$silent" != x"yes"; then + echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs" + fi + case " $hardware " in + *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5 +$as_echo_n "checking for log2 in -lm... " >&6; } +if ${ac_cv_lib_m_log2+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char log2 (); +int +main () +{ +return log2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_log2=yes +else + ac_cv_lib_m_log2=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_log2" >&5 +$as_echo "$ac_cv_lib_m_log2" >&6; } +if test "x$ac_cv_lib_m_log2" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +fi +;; + esac +fi + + cgen_breaks="" if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then cgen_breaks="break cgen_rtx_error"; diff --git a/sim/rx/ChangeLog b/sim/rx/ChangeLog index bfb417d..fbc8516 100644 --- a/sim/rx/ChangeLog +++ b/sim/rx/ChangeLog @@ -1,3 +1,7 @@ +2021-04-26 Mike Frysinger + + * aclocal.m4, config.in, configure: Regenerate. + 2021-04-22 Tom Tromey * configure, config.in: Rebuild. diff --git a/sim/rx/aclocal.m4 b/sim/rx/aclocal.m4 index db8c5cd..ed05269 100644 --- a/sim/rx/aclocal.m4 +++ b/sim/rx/aclocal.m4 @@ -113,6 +113,7 @@ m4_include([../../lt~obsolete.m4]) m4_include([../m4/sim_ac_common.m4]) m4_include([../m4/sim_ac_option_assert.m4]) m4_include([../m4/sim_ac_option_environment.m4]) +m4_include([../m4/sim_ac_option_hardware.m4]) m4_include([../m4/sim_ac_option_inline.m4]) m4_include([../m4/sim_ac_option_warnings.m4]) m4_include([../m4/sim_ac_output.m4]) diff --git a/sim/rx/config.in b/sim/rx/config.in index 9d69487..7cb68b3 100644 --- a/sim/rx/config.in +++ b/sim/rx/config.in @@ -19,6 +19,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H +/* Define if dv-sockser is usable. */ +#undef HAVE_DV_SOCKSER + /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H @@ -34,6 +37,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H +/* Define to 1 if you have the `m' library (-lm). */ +#undef HAVE_LIBM + /* Define to 1 if you have the `nsl' library (-lnsl). */ #undef HAVE_LIBNSL diff --git a/sim/rx/configure b/sim/rx/configure index 7a2f9ea..e227982 100755 --- a/sim/rx/configure +++ b/sim/rx/configure @@ -634,9 +634,6 @@ ac_func_list= ac_subst_vars='LTLIBOBJS LIBOBJS sim_reserved_bits -sim_hw -sim_hw_objs -sim_hw_cflags sim_default_model sim_scache sim_float @@ -758,7 +755,10 @@ PATH_SEPARATOR SHELL WERROR_CFLAGS WARN_CFLAGS -sim_inline' +sim_inline +sim_hw +sim_hw_objs +sim_hw_cflags' ac_subst_files='' ac_user_opts=' enable_option_checking @@ -785,6 +785,7 @@ enable_cycle_stats enable_werror enable_build_warnings enable_sim_build_warnings +enable_sim_hardware ' ac_precious_vars='build_alias host_alias @@ -1442,6 +1443,8 @@ Optional Features: --enable-sim-build-warnings enable SIM specific build-time compiler warnings if gcc is used + --enable-sim-hardware=LIST + Specify the hardware to be included in the build. Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] @@ -11181,7 +11184,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11184 "configure" +#line 11187 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11287,7 +11290,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11290 "configure" +#line 11293 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11973,6 +11976,107 @@ $as_echo "${WARN_CFLAGS} ${WERROR_CFLAGS}" >&6; } fi +hardware="cfi core pal glue " +sim_hw_cflags="-DWITH_HW=1" +sim_hw="$hardware" +sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`" + +# Check whether --enable-sim-hardware was given. +if test "${enable_sim_hardware+set}" = set; then : + enableval=$enable_sim_hardware; +else + enable_sim_hardware="yes" +fi + +case ${enable_sim_hardware} in + yes|no) ;; + ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";; + *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";; + *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';; +esac + +if test "$enable_sim_hardware" = no; then + sim_hw_objs= + sim_hw_cflags="-DWITH_HW=0" + sim_hw= +else + sim_hw_cflags="-DWITH_HW=1" + # remove duplicates + sim_hw="" + sim_hw_objs="\$(SIM_COMMON_HW_OBJS)" + for i in $hardware ; do + case " $sim_hw " in + *" $i "*) ;; + *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";; + esac + done + # mingw does not support sockser + case ${host} in + *mingw*) ;; + *) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device + # that you instatiate. Instead, other code will call into it directly. + # At some point, we should convert it over. + sim_hw_objs="$sim_hw_objs dv-sockser.o" + +cat >>confdefs.h <<_ACEOF +#define HAVE_DV_SOCKSER 1 +_ACEOF + + ;; + esac + if test x"$silent" != x"yes"; then + echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs" + fi + case " $hardware " in + *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5 +$as_echo_n "checking for log2 in -lm... " >&6; } +if ${ac_cv_lib_m_log2+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char log2 (); +int +main () +{ +return log2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_log2=yes +else + ac_cv_lib_m_log2=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_log2" >&5 +$as_echo "$ac_cv_lib_m_log2" >&6; } +if test "x$ac_cv_lib_m_log2" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +fi +;; + esac +fi + + cgen_breaks="" if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then cgen_breaks="break cgen_rtx_error"; diff --git a/sim/sh/ChangeLog b/sim/sh/ChangeLog index 98d1f35..d89fe28 100644 --- a/sim/sh/ChangeLog +++ b/sim/sh/ChangeLog @@ -1,3 +1,7 @@ +2021-04-26 Mike Frysinger + + * aclocal.m4, config.in, configure: Regenerate. + 2021-04-22 Tom Tromey * interp.c: Update includes. diff --git a/sim/sh/aclocal.m4 b/sim/sh/aclocal.m4 index ddeb1f5..4300d0e 100644 --- a/sim/sh/aclocal.m4 +++ b/sim/sh/aclocal.m4 @@ -115,6 +115,7 @@ m4_include([../m4/sim_ac_option_alignment.m4]) m4_include([../m4/sim_ac_option_assert.m4]) m4_include([../m4/sim_ac_option_endian.m4]) m4_include([../m4/sim_ac_option_environment.m4]) +m4_include([../m4/sim_ac_option_hardware.m4]) m4_include([../m4/sim_ac_option_inline.m4]) m4_include([../m4/sim_ac_option_warnings.m4]) m4_include([../m4/sim_ac_output.m4]) diff --git a/sim/sh/config.in b/sim/sh/config.in index 2416b7f..8d37b72 100644 --- a/sim/sh/config.in +++ b/sim/sh/config.in @@ -13,6 +13,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H +/* Define if dv-sockser is usable. */ +#undef HAVE_DV_SOCKSER + /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H @@ -28,6 +31,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H +/* Define to 1 if you have the `m' library (-lm). */ +#undef HAVE_LIBM + /* Define to 1 if you have the `nsl' library (-lnsl). */ #undef HAVE_LIBNSL diff --git a/sim/sh/configure b/sim/sh/configure index 25f04f5..afd78ba 100755 --- a/sim/sh/configure +++ b/sim/sh/configure @@ -634,9 +634,6 @@ ac_func_list= ac_subst_vars='LTLIBOBJS LIBOBJS sim_reserved_bits -sim_hw -sim_hw_objs -sim_hw_cflags sim_default_model sim_scache sim_float @@ -757,6 +754,9 @@ SHELL WERROR_CFLAGS WARN_CFLAGS sim_inline +sim_hw +sim_hw_objs +sim_hw_cflags sim_endian sim_alignment' ac_subst_files='' @@ -785,6 +785,7 @@ enable_sim_alignment enable_werror enable_build_warnings enable_sim_build_warnings +enable_sim_hardware ' ac_precious_vars='build_alias host_alias @@ -1444,6 +1445,8 @@ Optional Features: --enable-sim-build-warnings enable SIM specific build-time compiler warnings if gcc is used + --enable-sim-hardware=LIST + Specify the hardware to be included in the build. Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] @@ -11183,7 +11186,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11186 "configure" +#line 11189 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11289,7 +11292,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11292 "configure" +#line 11295 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12027,6 +12030,107 @@ fi +hardware="cfi core pal glue " +sim_hw_cflags="-DWITH_HW=1" +sim_hw="$hardware" +sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`" + +# Check whether --enable-sim-hardware was given. +if test "${enable_sim_hardware+set}" = set; then : + enableval=$enable_sim_hardware; +else + enable_sim_hardware="yes" +fi + +case ${enable_sim_hardware} in + yes|no) ;; + ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";; + *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";; + *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';; +esac + +if test "$enable_sim_hardware" = no; then + sim_hw_objs= + sim_hw_cflags="-DWITH_HW=0" + sim_hw= +else + sim_hw_cflags="-DWITH_HW=1" + # remove duplicates + sim_hw="" + sim_hw_objs="\$(SIM_COMMON_HW_OBJS)" + for i in $hardware ; do + case " $sim_hw " in + *" $i "*) ;; + *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";; + esac + done + # mingw does not support sockser + case ${host} in + *mingw*) ;; + *) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device + # that you instatiate. Instead, other code will call into it directly. + # At some point, we should convert it over. + sim_hw_objs="$sim_hw_objs dv-sockser.o" + +cat >>confdefs.h <<_ACEOF +#define HAVE_DV_SOCKSER 1 +_ACEOF + + ;; + esac + if test x"$silent" != x"yes"; then + echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs" + fi + case " $hardware " in + *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5 +$as_echo_n "checking for log2 in -lm... " >&6; } +if ${ac_cv_lib_m_log2+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char log2 (); +int +main () +{ +return log2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_log2=yes +else + ac_cv_lib_m_log2=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_log2" >&5 +$as_echo "$ac_cv_lib_m_log2" >&6; } +if test "x$ac_cv_lib_m_log2" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +fi +;; + esac +fi + + cgen_breaks="" if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then cgen_breaks="break cgen_rtx_error"; diff --git a/sim/v850/ChangeLog b/sim/v850/ChangeLog index 82a1d74..d46aa59 100644 --- a/sim/v850/ChangeLog +++ b/sim/v850/ChangeLog @@ -1,3 +1,7 @@ +2021-04-26 Mike Frysinger + + * aclocal.m4, config.in, configure: Regenerate. + 2021-04-22 Tom Tromey * configure, config.in: Rebuild. diff --git a/sim/v850/aclocal.m4 b/sim/v850/aclocal.m4 index a0d32d4..02c1113 100644 --- a/sim/v850/aclocal.m4 +++ b/sim/v850/aclocal.m4 @@ -116,6 +116,7 @@ m4_include([../m4/sim_ac_option_assert.m4]) m4_include([../m4/sim_ac_option_bitsize.m4]) m4_include([../m4/sim_ac_option_endian.m4]) m4_include([../m4/sim_ac_option_environment.m4]) +m4_include([../m4/sim_ac_option_hardware.m4]) m4_include([../m4/sim_ac_option_inline.m4]) m4_include([../m4/sim_ac_option_reserved_bits.m4]) m4_include([../m4/sim_ac_option_warnings.m4]) diff --git a/sim/v850/config.in b/sim/v850/config.in index 1eb9e29..8249d7c 100644 --- a/sim/v850/config.in +++ b/sim/v850/config.in @@ -19,6 +19,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H +/* Define if dv-sockser is usable. */ +#undef HAVE_DV_SOCKSER + /* Define to 1 if you have the `execv' function. */ #undef HAVE_EXECV @@ -43,6 +46,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H +/* Define to 1 if you have the `m' library (-lm). */ +#undef HAVE_LIBM + /* Define to 1 if you have the `nsl' library (-lnsl). */ #undef HAVE_LIBNSL diff --git a/sim/v850/configure b/sim/v850/configure index aa74f6a..d5941de 100755 --- a/sim/v850/configure +++ b/sim/v850/configure @@ -633,9 +633,6 @@ ac_header_list= ac_func_list= ac_subst_vars='LTLIBOBJS LIBOBJS -sim_hw -sim_hw_objs -sim_hw_cflags sim_default_model sim_scache sim_float @@ -756,6 +753,9 @@ WERROR_CFLAGS WARN_CFLAGS sim_reserved_bits sim_inline +sim_hw +sim_hw_objs +sim_hw_cflags sim_endian sim_bitsize sim_alignment' @@ -787,6 +787,7 @@ enable_sim_bitsize enable_werror enable_build_warnings enable_sim_build_warnings +enable_sim_hardware ' ac_precious_vars='build_alias host_alias @@ -1450,6 +1451,8 @@ Optional Features: --enable-sim-build-warnings enable SIM specific build-time compiler warnings if gcc is used + --enable-sim-hardware=LIST + Specify the hardware to be included in the build. Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] @@ -11196,7 +11199,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11199 "configure" +#line 11202 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11302,7 +11305,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11305 "configure" +#line 11308 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12135,6 +12138,107 @@ $as_echo "${WARN_CFLAGS} ${WERROR_CFLAGS}" >&6; } fi +hardware="cfi core pal glue " +sim_hw_cflags="-DWITH_HW=1" +sim_hw="$hardware" +sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`" + +# Check whether --enable-sim-hardware was given. +if test "${enable_sim_hardware+set}" = set; then : + enableval=$enable_sim_hardware; +else + enable_sim_hardware="yes" +fi + +case ${enable_sim_hardware} in + yes|no) ;; + ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";; + *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";; + *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';; +esac + +if test "$enable_sim_hardware" = no; then + sim_hw_objs= + sim_hw_cflags="-DWITH_HW=0" + sim_hw= +else + sim_hw_cflags="-DWITH_HW=1" + # remove duplicates + sim_hw="" + sim_hw_objs="\$(SIM_COMMON_HW_OBJS)" + for i in $hardware ; do + case " $sim_hw " in + *" $i "*) ;; + *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";; + esac + done + # mingw does not support sockser + case ${host} in + *mingw*) ;; + *) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device + # that you instatiate. Instead, other code will call into it directly. + # At some point, we should convert it over. + sim_hw_objs="$sim_hw_objs dv-sockser.o" + +cat >>confdefs.h <<_ACEOF +#define HAVE_DV_SOCKSER 1 +_ACEOF + + ;; + esac + if test x"$silent" != x"yes"; then + echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs" + fi + case " $hardware " in + *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5 +$as_echo_n "checking for log2 in -lm... " >&6; } +if ${ac_cv_lib_m_log2+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char log2 (); +int +main () +{ +return log2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_log2=yes +else + ac_cv_lib_m_log2=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_log2" >&5 +$as_echo "$ac_cv_lib_m_log2" >&6; } +if test "x$ac_cv_lib_m_log2" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +fi +;; + esac +fi + + cgen_breaks="" if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then cgen_breaks="break cgen_rtx_error"; -- cgit v1.1