From 28e7409f622ad4dd0ec4146b485ae64ffe691b7e Mon Sep 17 00:00:00 2001 From: Nick Clifton Date: Mon, 31 Jul 2000 22:08:14 +0000 Subject: Add --pcrel option to m68k port --- gas/ChangeLog | 9 + gas/Makefile.in | 2 +- gas/aclocal.m4 | 11 +- gas/cgen.c | 2 +- gas/cgen.h | 2 +- gas/config/tc-m68k.c | 65 +++- gas/configure | 450 +++++++++++----------- gas/doc/c-m68k.texi | 7 + gas/po/POTFILES.in | 4 +- gas/po/gas.pot | 1040 +++++++++++++++++++++++++------------------------- 10 files changed, 832 insertions(+), 760 deletions(-) diff --git a/gas/ChangeLog b/gas/ChangeLog index 1babd2b..d48130c 100644 --- a/gas/ChangeLog +++ b/gas/ChangeLog @@ -1,3 +1,12 @@ +2000-07-31 Michael Sokolov + + * config/tc-m68k.c (flag_keep_pcrel, OPTION_PCREL): Add --pcrel option. + (md_convert_frag_1, md_estimate_size_before_relax): When making DBcc + long emit a long branch if available instead of an absolute jump, never + emit absolute jumps for anything with --pcrel. + + * doc/c-m68k.texi: Document new command line option. + 2000-07-28 Jason Eckhardt * configure.in: Add bits for i860-stardent-{sysv4, elf}*. diff --git a/gas/Makefile.in b/gas/Makefile.in index edfed7d..bd72f43 100644 --- a/gas/Makefile.in +++ b/gas/Makefile.in @@ -1889,7 +1889,7 @@ configure configure.in gdbinit.in itbl-lex.c itbl-parse.c DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) -TAR = tar +TAR = gtar GZIP_ENV = --best SOURCES = $(itbl_test_SOURCES) $(as_new_SOURCES) $(EXTRA_as_new_SOURCES) $(gasp_new_SOURCES) OBJECTS = $(itbl_test_OBJECTS) $(as_new_OBJECTS) $(gasp_new_OBJECTS) diff --git a/gas/aclocal.m4 b/gas/aclocal.m4 index 4b4ca84..2ae06cf 100644 --- a/gas/aclocal.m4 +++ b/gas/aclocal.m4 @@ -173,7 +173,7 @@ LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ -$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \ +$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ || AC_MSG_ERROR([libtool configure failed]) # Reload cache, that may have been modified by ltconfig @@ -205,11 +205,6 @@ AC_REQUIRE([AC_PROG_NM])dnl AC_REQUIRE([AC_PROG_LN_S])dnl dnl -case "$target" in -NONE) lt_target="$host" ;; -*) lt_target="$target" ;; -esac - # Check for any special flags to pass to ltconfig. libtool_flags="--cache-file=$cache_file" test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" @@ -228,7 +223,7 @@ test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" # Some flags need to be propagated to the compiler or linker for good # libtool support. -case "$lt_target" in +case "$host" in *-*-irix6*) # Find out which ABI we are using. echo '[#]line __oline__ "configure"' > conftest.$ac_ext @@ -495,7 +490,7 @@ AC_MSG_RESULT([$NM]) AC_DEFUN(AC_CHECK_LIBM, [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= -case "$lt_target" in +case "$host" in *-*-beos* | *-*-cygwin*) # These system don't have libm ;; diff --git a/gas/cgen.c b/gas/cgen.c index d674057..a4ef083 100644 --- a/gas/cgen.c +++ b/gas/cgen.c @@ -1,5 +1,5 @@ /* GAS interface for targets using CGEN: Cpu tools GENerator. - Copyright (C) 1996, 1997, 1998, 1999 Free Software Foundation, Inc. + Copyright (C) 1996, 1997, 1998, 1999, 2000 Free Software Foundation, Inc. This file is part of GAS, the GNU Assembler. diff --git a/gas/cgen.h b/gas/cgen.h index f846760..12d5f72 100644 --- a/gas/cgen.h +++ b/gas/cgen.h @@ -1,5 +1,5 @@ /* GAS cgen support. - Copyright (C) 1998, 1999 Free Software Foundation, Inc. + Copyright (C) 1998, 1999, 2000 Free Software Foundation, Inc. This file is part of GAS, the GNU Assembler. diff --git a/gas/config/tc-m68k.c b/gas/config/tc-m68k.c index 0badf70..6252bc5 100644 --- a/gas/config/tc-m68k.c +++ b/gas/config/tc-m68k.c @@ -74,6 +74,7 @@ int flag_want_pic; static int flag_short_refs; /* -l option */ static int flag_long_jumps; /* -S option */ +static int flag_keep_pcrel; /* --pcrel option. */ #ifdef REGISTER_PREFIX_OPTIONAL int flag_reg_prefix_optional = REGISTER_PREFIX_OPTIONAL; @@ -4317,8 +4318,11 @@ md_convert_frag_1 (fragP) ext = 2; break; case TAB (ABRANCH, LONG): - if (!HAVE_LONG_BRANCH(current_architecture)) + if (!HAVE_LONG_BRANCH (current_architecture)) { + if (flag_keep_pcrel) + as_bad (_("long branch not supported")); + if (fragP->fr_opcode[0] == 0x61) /* BSR */ { @@ -4363,6 +4367,9 @@ md_convert_frag_1 (fragP) case TAB (BCC68000, LONG): /* only Bcc 68000 instructions can come here */ /* change bcc into b!cc/jmp absl long */ + if (flag_keep_pcrel) + as_bad (_("long branch not supported")); + fragP->fr_opcode[0] ^= 0x01; /* invert bcc */ fragP->fr_opcode[1] = 0x6;/* branch offset = 6 */ @@ -4379,18 +4386,30 @@ md_convert_frag_1 (fragP) break; case TAB (DBCC, LONG): /* only DBcc 68000 instructions can come here */ - /* change dbcc into dbcc/jmp absl long */ + /* Change dbcc into dbcc/bral. */ + if (! HAVE_LONG_BRANCH (current_architecture) && flag_keep_pcrel) + as_bad (_("long branch not supported")); + /* JF: these used to be fr_opcode[2-7], but that's wrong */ *buffer_address++ = 0x00; /* branch offset = 4 */ *buffer_address++ = 0x04; *buffer_address++ = 0x60; /* put in bra pc+6 */ *buffer_address++ = 0x06; - *buffer_address++ = 0x4e; /* put in jmp long (0x4ef9) */ - *buffer_address++ = (char) 0xf9; + if (HAVE_LONG_BRANCH (current_architecture)) + { + *buffer_address++ = 0x60; /* Put in bral (0x60ff). */ + *buffer_address++ = (char) 0xff; + } + else + { + *buffer_address++ = 0x4e; /* Put in jmp long (0x4ef9). */ + *buffer_address++ = (char) 0xf9; + } fragP->fr_fix += 6; /* account for bra/jmp instructions */ fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol, - fragP->fr_offset, 0, NO_RELOC); + fragP->fr_offset, HAVE_LONG_BRANCH (current_architecture), + NO_RELOC); fragP->fr_fix += 4; ext = 0; break; @@ -4532,7 +4551,8 @@ md_estimate_size_before_relax (fragP, segment) fragP->fr_subtype = TAB (TABTYPE (fragP->fr_subtype), BYTE); break; } - else if ((fragP->fr_symbol != NULL) && flag_short_refs) + else if ((fragP->fr_symbol != NULL) + && (flag_short_refs || flag_keep_pcrel)) { /* Symbol is undefined and we want short ref */ fix_new (fragP, (int) (fragP->fr_fix), 2, fragP->fr_symbol, fragP->fr_offset, 1, NO_RELOC); @@ -4630,7 +4650,7 @@ md_estimate_size_before_relax (fragP, segment) break; } /* only Bcc 68000 instructions can come here */ - if ((fragP->fr_symbol != NULL) && flag_short_refs) + if ((fragP->fr_symbol != NULL) && (flag_short_refs || flag_keep_pcrel)) { /* the user wants short refs, so emit one */ fix_new (fragP, fragP->fr_fix, 2, fragP->fr_symbol, @@ -4666,7 +4686,10 @@ md_estimate_size_before_relax (fragP, segment) } /* only DBcc 68000 instructions can come here */ - if (fragP->fr_symbol != NULL && flag_short_refs) + if (fragP->fr_symbol != NULL + && (flag_short_refs + || (! HAVE_LONG_BRANCH (current_architecture) + && flag_keep_pcrel))) { /* the user wants short refs, so emit one */ fix_new (fragP, fragP->fr_fix, 2, fragP->fr_symbol, @@ -4675,18 +4698,27 @@ md_estimate_size_before_relax (fragP, segment) } else { - /* change dbcc into dbcc/jmp absl long */ + /* Change dbcc into dbcc/bral. */ /* JF: these used to be fr_opcode[2-4], which is wrong. */ buffer_address[0] = 0x00; /* branch offset = 4 */ buffer_address[1] = 0x04; buffer_address[2] = 0x60; /* put in bra pc + ... */ /* JF: these were fr_opcode[5-7] */ buffer_address[3] = 0x06; /* Plus 6 */ - buffer_address[4] = 0x4e; /* put in jmp long (0x4ef9) */ - buffer_address[5] = (char) 0xf9; + if (HAVE_LONG_BRANCH (current_architecture)) + { + buffer_address[4] = 0x60; /* Put in bral (0x60ff). */ + buffer_address[5] = (char) 0xff; + } + else + { + buffer_address[4] = 0x4e; /* Put in jmp long (0x4ef9). */ + buffer_address[5] = (char) 0xf9; + } fragP->fr_fix += 6; /* account for bra/jmp instruction */ fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol, - fragP->fr_offset, 0, NO_RELOC); + fragP->fr_offset, HAVE_LONG_BRANCH (current_architecture), + NO_RELOC); fragP->fr_fix += 4; } @@ -6745,6 +6777,7 @@ s_mri_endw (ignore) * * -pic Indicates PIC. * -k Indicates PIC. (Sun 3 only.) + * --pcrel Never turn PC-relative branches into absolute jumps. * * --bitwise-or * Permit `|' to be used in expressions. @@ -6773,6 +6806,8 @@ struct option md_longopts[] = { {"disp-size-default-16", no_argument, NULL, OPTION_DISP_SIZE_DEFAULT_16}, #define OPTION_DISP_SIZE_DEFAULT_32 (OPTION_MD_BASE + 6) {"disp-size-default-32", no_argument, NULL, OPTION_DISP_SIZE_DEFAULT_32}, +#define OPTION_PCREL (OPTION_MD_BASE + 7) + {"pcrel", no_argument, NULL, OPTION_PCREL}, {NULL, no_argument, NULL, 0} }; size_t md_longopts_size = sizeof(md_longopts); @@ -6794,6 +6829,11 @@ md_parse_option (c, arg) flag_long_jumps = 1; break; + case OPTION_PCREL: /* --pcrel means never turn PC-relative + branches into absolute jumps. */ + flag_keep_pcrel = 1; + break; + case 'A': if (*arg == 'm') arg++; @@ -6950,6 +6990,7 @@ md_show_usage (stream) [default yes for 68020 and up]\n\ -pic, -k generate position independent code\n\ -S turn jbsr into jsr\n\ +--pcrel never turn PC-relative branches into absolute jumps\n\ --register-prefix-optional\n\ recognize register names without prefix character\n\ --bitwise-or do not treat `|' as a comment character\n")); diff --git a/gas/configure b/gas/configure index 93afadd..5ab6152 100755 --- a/gas/configure +++ b/gas/configure @@ -53,6 +53,7 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= +sitefile= srcdir= target=NONE verbose= @@ -167,6 +168,7 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages + --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -337,6 +339,11 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; + -site-file | --site-file | --site-fil | --site-fi | --site-f) + ac_prev=sitefile ;; + -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) + sitefile="$ac_optarg" ;; + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -502,12 +509,16 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +if test -z "$sitefile"; then + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi fi +else + CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -594,7 +605,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:598: checking host system type" >&5 +echo "configure:609: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -615,7 +626,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:619: checking target system type" >&5 +echo "configure:630: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -633,7 +644,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:637: checking build system type" >&5 +echo "configure:648: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -668,7 +679,7 @@ test "$host_alias" != "$target_alias" && # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:672: checking for a BSD compatible install" >&5 +echo "configure:683: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -721,7 +732,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 -echo "configure:725: checking whether build environment is sane" >&5 +echo "configure:736: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile @@ -778,7 +789,7 @@ test "$program_suffix" != NONE && test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:782: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:793: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -824,7 +835,7 @@ EOF missing_dir=`cd $ac_aux_dir && pwd` echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 -echo "configure:828: checking for working aclocal" >&5 +echo "configure:839: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -837,7 +848,7 @@ else fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 -echo "configure:841: checking for working autoconf" >&5 +echo "configure:852: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -850,7 +861,7 @@ else fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 -echo "configure:854: checking for working automake" >&5 +echo "configure:865: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -863,7 +874,7 @@ else fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 -echo "configure:867: checking for working autoheader" >&5 +echo "configure:878: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -876,7 +887,7 @@ else fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 -echo "configure:880: checking for working makeinfo" >&5 +echo "configure:891: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -962,7 +973,7 @@ fi # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:966: checking for $ac_word" >&5 +echo "configure:977: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -992,7 +1003,7 @@ fi # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:996: checking for $ac_word" >&5 +echo "configure:1007: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1022,7 +1033,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1026: checking for $ac_word" >&5 +echo "configure:1037: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1073,7 +1084,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1077: checking for $ac_word" >&5 +echo "configure:1088: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1105,7 +1116,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1109: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1120: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1116,12 +1127,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 1120 "configure" +#line 1131 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:1125: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1136: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1147,12 +1158,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1151: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1162: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1156: checking whether we are using GNU C" >&5 +echo "configure:1167: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1161,7 +1172,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1165: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1176: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1180,7 +1191,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1184: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1195: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1223,7 +1234,7 @@ ac_prog=ld if test "$ac_cv_prog_gcc" = yes; then # Check if gcc -print-prog-name=ld gives a path. echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6 -echo "configure:1227: checking for ld used by GCC" >&5 +echo "configure:1238: checking for ld used by GCC" >&5 ac_prog=`($CC -print-prog-name=ld) 2>&5` case "$ac_prog" in # Accept absolute paths. @@ -1247,10 +1258,10 @@ echo "configure:1227: checking for ld used by GCC" >&5 esac elif test "$with_gnu_ld" = yes; then echo $ac_n "checking for GNU ld""... $ac_c" 1>&6 -echo "configure:1251: checking for GNU ld" >&5 +echo "configure:1262: checking for GNU ld" >&5 else echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 -echo "configure:1254: checking for non-GNU ld" >&5 +echo "configure:1265: checking for non-GNU ld" >&5 fi if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1285,7 +1296,7 @@ else fi test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; } echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6 -echo "configure:1289: checking if the linker ($LD) is GNU ld" >&5 +echo "configure:1300: checking if the linker ($LD) is GNU ld" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1301,7 +1312,7 @@ echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6 echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6 -echo "configure:1305: checking for BSD-compatible nm" >&5 +echo "configure:1316: checking for BSD-compatible nm" >&5 if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1337,7 +1348,7 @@ NM="$ac_cv_path_NM" echo "$ac_t""$NM" 1>&6 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 -echo "configure:1341: checking whether ln -s works" >&5 +echo "configure:1352: checking whether ln -s works" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1358,11 +1369,6 @@ else fi -case "$target" in -NONE) lt_target="$host" ;; -*) lt_target="$target" ;; -esac - # Check for any special flags to pass to ltconfig. libtool_flags="--cache-file=$cache_file" test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" @@ -1383,11 +1389,11 @@ test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" # Some flags need to be propagated to the compiler or linker for good # libtool support. -case "$lt_target" in +case "$host" in *-*-irix6*) # Find out which ABI we are using. - echo '#line 1390 "configure"' > conftest.$ac_ext - if { (eval echo configure:1391: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + echo '#line 1396 "configure"' > conftest.$ac_ext + if { (eval echo configure:1397: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then case "`/usr/bin/file conftest.o`" in *32-bit*) LD="${LD-ld} -32" @@ -1408,19 +1414,19 @@ case "$lt_target" in SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6 -echo "configure:1412: checking whether the C compiler needs -belf" >&5 +echo "configure:1418: checking whether the C compiler needs -belf" >&5 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1430: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* lt_cv_cc_needs_belf=yes else @@ -1498,7 +1504,7 @@ LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ -$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \ +$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ || { echo "configure: error: libtool configure failed" 1>&2; exit 1; } # Reload cache, that may have been modified by ltconfig @@ -2437,7 +2443,7 @@ EOF # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2441: checking for $ac_word" >&5 +echo "configure:2447: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2467,7 +2473,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2471: checking for $ac_word" >&5 +echo "configure:2477: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2518,7 +2524,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2522: checking for $ac_word" >&5 +echo "configure:2528: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2550,7 +2556,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:2554: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:2560: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -2561,12 +2567,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 2565 "configure" +#line 2571 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:2570: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2576: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -2592,12 +2598,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:2596: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:2602: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:2601: checking whether we are using GNU C" >&5 +echo "configure:2607: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2606,7 +2612,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2610: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2616: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -2625,7 +2631,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:2629: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:2635: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2662,7 +2668,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2666: checking for $ac_word" >&5 +echo "configure:2672: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2693,7 +2699,7 @@ done test -n "$YACC" || YACC="yacc" echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:2697: checking how to run the C preprocessor" >&5 +echo "configure:2703: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -2708,13 +2714,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2718: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2724: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -2725,13 +2731,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2735: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2741: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -2742,13 +2748,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2752: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2758: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -2778,7 +2784,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2782: checking for $ac_word" >&5 +echo "configure:2788: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2811,7 +2817,7 @@ test -n "$LEX" || LEX=""$missing_dir/missing flex"" # Extract the first word of "flex", so it can be a program name with args. set dummy flex; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2815: checking for $ac_word" >&5 +echo "configure:2821: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2845,7 +2851,7 @@ then *) ac_lib=l ;; esac echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6 -echo "configure:2849: checking for yywrap in -l$ac_lib" >&5 +echo "configure:2855: checking for yywrap in -l$ac_lib" >&5 ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2853,7 +2859,7 @@ else ac_save_LIBS="$LIBS" LIBS="-l$ac_lib $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2874: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2887,7 +2893,7 @@ fi fi echo $ac_n "checking lex output file root""... $ac_c" 1>&6 -echo "configure:2891: checking lex output file root" >&5 +echo "configure:2897: checking lex output file root" >&5 if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2908,7 +2914,7 @@ echo "$ac_t""$ac_cv_prog_lex_root" 1>&6 LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6 -echo "configure:2912: checking whether yytext is a pointer" >&5 +echo "configure:2918: checking whether yytext is a pointer" >&5 if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2920,14 +2926,14 @@ echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c ac_save_LIBS="$LIBS" LIBS="$LIBS $LEXLIB" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2937: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_prog_lex_yytext_pointer=yes else @@ -2951,7 +2957,7 @@ fi ALL_LINGUAS= echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:2955: checking for POSIXized ISC" >&5 +echo "configure:2961: checking for POSIXized ISC" >&5 if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -2972,12 +2978,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:2976: checking for ANSI C header files" >&5 +echo "configure:2982: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -2985,7 +2991,7 @@ else #include EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2989: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2995: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3002,7 +3008,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -3020,7 +3026,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -3041,7 +3047,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -3052,7 +3058,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:3056: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3062: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -3076,12 +3082,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:3080: checking for working const" >&5 +echo "configure:3086: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3140: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -3151,21 +3157,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:3155: checking for inline" >&5 +echo "configure:3161: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3175: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -3191,12 +3197,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:3195: checking for off_t" >&5 +echo "configure:3201: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -3224,12 +3230,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:3228: checking for size_t" >&5 +echo "configure:3234: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -3259,19 +3265,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:3263: checking for working alloca.h" >&5 +echo "configure:3269: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:3275: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3281: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -3292,12 +3298,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:3296: checking for alloca" >&5 +echo "configure:3302: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3335: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -3357,12 +3363,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:3361: checking whether alloca needs Cray hooks" >&5 +echo "configure:3367: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3391: checking for $ac_func" >&5 +echo "configure:3397: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3425: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3442,7 +3448,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:3446: checking stack direction for C alloca" >&5 +echo "configure:3452: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3450,7 +3456,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3479: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -3494,17 +3500,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3498: checking for $ac_hdr" >&5 +echo "configure:3504: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3508: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3514: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3533,12 +3539,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3537: checking for $ac_func" >&5 +echo "configure:3543: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3571: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3586,7 +3592,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:3590: checking for working mmap" >&5 +echo "configure:3596: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3594,7 +3600,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3744: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -3762,17 +3768,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3766: checking for $ac_hdr" >&5 +echo "configure:3772: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3776: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3782: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3802,12 +3808,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3806: checking for $ac_func" >&5 +echo "configure:3812: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3840: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3859,12 +3865,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3863: checking for $ac_func" >&5 +echo "configure:3869: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3897: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3921,19 +3927,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:3925: checking for LC_MESSAGES" >&5 +echo "configure:3931: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:3937: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3943: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -3954,7 +3960,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:3958: checking whether NLS is requested" >&5 +echo "configure:3964: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -3974,7 +3980,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:3978: checking whether included gettext is requested" >&5 +echo "configure:3984: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -3993,17 +3999,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:3997: checking for libintl.h" >&5 +echo "configure:4003: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:4007: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:4013: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -4020,19 +4026,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:4024: checking for gettext in libc" >&5 +echo "configure:4030: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:4036: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4042: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -4048,7 +4054,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:4052: checking for bindtextdomain in -lintl" >&5 +echo "configure:4058: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -4056,7 +4062,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4077: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -4083,19 +4089,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:4087: checking for gettext in libintl" >&5 +echo "configure:4093: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4105: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -4123,7 +4129,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4127: checking for $ac_word" >&5 +echo "configure:4133: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4157,12 +4163,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4161: checking for $ac_func" >&5 +echo "configure:4167: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4195: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -4212,7 +4218,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4216: checking for $ac_word" >&5 +echo "configure:4222: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4248,7 +4254,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4252: checking for $ac_word" >&5 +echo "configure:4258: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4280,7 +4286,7 @@ else fi cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4298: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -4320,7 +4326,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4324: checking for $ac_word" >&5 +echo "configure:4330: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4354,7 +4360,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4358: checking for $ac_word" >&5 +echo "configure:4364: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4390,7 +4396,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4394: checking for $ac_word" >&5 +echo "configure:4400: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4480,7 +4486,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:4484: checking for catalogs to be installed" >&5 +echo "configure:4490: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -4508,17 +4514,17 @@ echo "configure:4484: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:4512: checking for linux/version.h" >&5 +echo "configure:4518: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:4522: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:4528: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -4581,7 +4587,7 @@ fi echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:4585: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:4591: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -4604,12 +4610,12 @@ fi echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 -echo "configure:4608: checking for Cygwin environment" >&5 +echo "configure:4614: checking for Cygwin environment" >&5 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:4630: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_cygwin=yes else @@ -4637,19 +4643,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6 CYGWIN= test "$ac_cv_cygwin" = yes && CYGWIN=yes echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 -echo "configure:4641: checking for mingw32 environment" >&5 +echo "configure:4647: checking for mingw32 environment" >&5 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:4659: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_mingw32=yes else @@ -4668,7 +4674,7 @@ test "$ac_cv_mingw32" = yes && MINGW32=yes echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:4672: checking for executable suffix" >&5 +echo "configure:4678: checking for executable suffix" >&5 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4678,10 +4684,10 @@ else rm -f conftest* echo 'int main () { return 0; }' > conftest.$ac_ext ac_cv_exeext= - if { (eval echo configure:4682: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + if { (eval echo configure:4688: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then for file in conftest.*; do case $file in - *.c | *.o | *.obj) ;; + *.c | *.o | *.obj | *.ilk | *.pdb) ;; *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; esac done @@ -4703,17 +4709,17 @@ for ac_hdr in string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h e do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:4707: checking for $ac_hdr" >&5 +echo "configure:4713: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:4717: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:4723: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -4743,7 +4749,7 @@ done # Put this here so that autoconf's "cross-compiling" message doesn't confuse # people who are not cross-compiling but are compiling cross-assemblers. echo $ac_n "checking whether compiling a cross-assembler""... $ac_c" 1>&6 -echo "configure:4747: checking whether compiling a cross-assembler" >&5 +echo "configure:4753: checking whether compiling a cross-assembler" >&5 if test "${host}" = "${target}"; then cross_gas=no else @@ -4758,19 +4764,19 @@ echo "$ac_t""$cross_gas" 1>&6 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:4762: checking for working alloca.h" >&5 +echo "configure:4768: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:4774: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4780: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -4791,12 +4797,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:4795: checking for alloca" >&5 +echo "configure:4801: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4834: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -4856,12 +4862,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:4860: checking whether alloca needs Cray hooks" >&5 +echo "configure:4866: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4890: checking for $ac_func" >&5 +echo "configure:4896: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4924: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -4941,7 +4947,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:4945: checking stack direction for C alloca" >&5 +echo "configure:4951: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4949,7 +4955,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:4978: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -4990,21 +4996,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:4994: checking for inline" >&5 +echo "configure:5000: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5014: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -5034,12 +5040,12 @@ esac for ac_func in unlink remove do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:5038: checking for $ac_func" >&5 +echo "configure:5044: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5072: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -5091,12 +5097,12 @@ done for ac_func in sbrk do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:5095: checking for $ac_func" >&5 +echo "configure:5101: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5129: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -5148,13 +5154,13 @@ done case "${need_libm}" in yes) LIBM= -case "$lt_target" in +case "$host" in *-*-beos* | *-*-cygwin*) # These system don't have libm ;; *-ncr-sysv4.3*) echo $ac_n "checking for _mwvalidcheckl in -lmw""... $ac_c" 1>&6 -echo "configure:5158: checking for _mwvalidcheckl in -lmw" >&5 +echo "configure:5164: checking for _mwvalidcheckl in -lmw" >&5 ac_lib_var=`echo mw'_'_mwvalidcheckl | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -5162,7 +5168,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lmw $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5183: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -5194,7 +5200,7 @@ else fi echo $ac_n "checking for main in -lm""... $ac_c" 1>&6 -echo "configure:5198: checking for main in -lm" >&5 +echo "configure:5204: checking for main in -lm" >&5 ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -5202,14 +5208,14 @@ else ac_save_LIBS="$LIBS" LIBS="-lm $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5219: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -5232,7 +5238,7 @@ fi ;; *) echo $ac_n "checking for main in -lm""... $ac_c" 1>&6 -echo "configure:5236: checking for main in -lm" >&5 +echo "configure:5242: checking for main in -lm" >&5 ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -5240,14 +5246,14 @@ else ac_save_LIBS="$LIBS" LIBS="-lm $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5257: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -5278,12 +5284,12 @@ esac # enough, but on some of those systems, the assert macro relies on requoting # working properly! echo $ac_n "checking for working assert macro""... $ac_c" 1>&6 -echo "configure:5282: checking for working assert macro" >&5 +echo "configure:5288: checking for working assert macro" >&5 if eval "test \"`echo '$''{'gas_cv_assert_ok'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -5299,7 +5305,7 @@ assert (a == b ; return 0; } EOF -if { (eval echo configure:5303: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5309: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_assert_ok=yes else @@ -5340,12 +5346,12 @@ gas_test_headers=" " echo $ac_n "checking whether declaration is required for strstr""... $ac_c" 1>&6 -echo "configure:5344: checking whether declaration is required for strstr" >&5 +echo "configure:5350: checking whether declaration is required for strstr" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_strstr'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5366: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_strstr=no else @@ -5377,12 +5383,12 @@ fi echo $ac_n "checking whether declaration is required for malloc""... $ac_c" 1>&6 -echo "configure:5381: checking whether declaration is required for malloc" >&5 +echo "configure:5387: checking whether declaration is required for malloc" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_malloc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5403: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_malloc=no else @@ -5414,12 +5420,12 @@ fi echo $ac_n "checking whether declaration is required for free""... $ac_c" 1>&6 -echo "configure:5418: checking whether declaration is required for free" >&5 +echo "configure:5424: checking whether declaration is required for free" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_free'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5440: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_free=no else @@ -5451,12 +5457,12 @@ fi echo $ac_n "checking whether declaration is required for sbrk""... $ac_c" 1>&6 -echo "configure:5455: checking whether declaration is required for sbrk" >&5 +echo "configure:5461: checking whether declaration is required for sbrk" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_sbrk'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5477: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_sbrk=no else @@ -5488,12 +5494,12 @@ fi echo $ac_n "checking whether declaration is required for environ""... $ac_c" 1>&6 -echo "configure:5492: checking whether declaration is required for environ" >&5 +echo "configure:5498: checking whether declaration is required for environ" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_environ'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5514: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_environ=no else @@ -5528,12 +5534,12 @@ fi # for it? echo $ac_n "checking whether declaration is required for errno""... $ac_c" 1>&6 -echo "configure:5532: checking whether declaration is required for errno" >&5 +echo "configure:5538: checking whether declaration is required for errno" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_errno'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5558: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_errno=no else diff --git a/gas/doc/c-m68k.texi b/gas/doc/c-m68k.texi index 16f857f..877c166 100644 --- a/gas/doc/c-m68k.texi +++ b/gas/doc/c-m68k.texi @@ -84,6 +84,13 @@ to instead assume that the displacement is 16 bits. In this case, @samp{disp} is a 16 bit value. You may use the @samp{--disp-size-default-32} option to restore the default behaviour. +@cindex @samp{--pcrel} +Always generate PC relative branches. Actually what this option really +does is to prevent PC relative branches from being turned into absolute +jumps. If this cannot be done (because the specific architecture does +not have a suitable PC relative branch instruction), the assembler will +generate an error message. + @cindex @samp{-m68000} and related options @cindex architecture options, M680x0 @cindex M680x0 architecture options diff --git a/gas/po/POTFILES.in b/gas/po/POTFILES.in index f0a7cd6..30dab30 100644 --- a/gas/po/POTFILES.in +++ b/gas/po/POTFILES.in @@ -126,18 +126,18 @@ ecoff.c ecoff.h ehopt.c ehopt.c -emul-target.h emul.h +emul-target.h expr.c expr.c expr.h flonum-copy.c flonum-copy.c +flonum.h flonum-konst.c flonum-konst.c flonum-mult.c flonum-mult.c -flonum.h frags.c frags.c frags.h diff --git a/gas/po/gas.pot b/gas/po/gas.pot index 66727e7..de6d311 100644 --- a/gas/po/gas.pot +++ b/gas/po/gas.pot @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2000-07-20 19:36+0200\n" +"POT-Creation-Date: 2000-07-31 15:04-0700\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -51,7 +51,7 @@ msgstr "" msgid "Missing close quote: (assumed)" msgstr "" -#: app.c:1057 app.c:1111 app.c:1180 +#: app.c:1057 app.c:1111 app.c:1184 msgid "end of file in comment; newline inserted" msgstr "" @@ -345,8 +345,8 @@ msgstr "" #. * This should never happen. #. #: atof-generic.c:438 config/tc-a29k.c:544 config/tc-i860.c:335 -#: config/tc-i860.c:708 config/tc-m68k.c:3122 config/tc-m68k.c:3151 -#: config/tc-sparc.c:2478 +#: config/tc-i860.c:708 config/tc-m68k.c:3123 config/tc-m68k.c:3152 +#: config/tc-sparc.c:2482 msgid "failed sanity check." msgstr "" @@ -424,17 +424,17 @@ msgstr "" msgid "Attempt to put an undefined symbol into set %s" msgstr "" -#: config/obj-aout.c:198 config/obj-coff.c:1217 config/obj-elf.c:1706 +#: config/obj-aout.c:198 config/obj-coff.c:1214 config/obj-elf.c:1712 #: ecoff.c:3668 #, c-format msgid "Symbol `%s' can not be both weak and common" msgstr "" -#: config/obj-aout.c:256 config/obj-coff.c:1958 +#: config/obj-aout.c:256 config/obj-coff.c:1955 msgid "unresolved relocation" msgstr "" -#: config/obj-aout.c:258 config/obj-coff.c:1960 +#: config/obj-aout.c:258 config/obj-coff.c:1957 #, c-format msgid "bad relocation: symbol `%s' not in symbol table" msgstr "" @@ -444,7 +444,7 @@ msgstr "" msgid "%s: bad type for weak symbol" msgstr "" -#: config/obj-aout.c:459 config/obj-coff.c:2891 write.c:1833 +#: config/obj-aout.c:459 config/obj-coff.c:2888 write.c:1836 #, c-format msgid "%s: global symbols not supported in common sections" msgstr "" @@ -473,7 +473,7 @@ msgstr "" msgid "Line numbers must be positive integers\n" msgstr "" -#: config/obj-coff.c:484 config/obj-coff.c:2305 +#: config/obj-coff.c:484 config/obj-coff.c:2302 msgid ".ln pseudo-op inside .def/.endef: ignored." msgstr "" @@ -485,11 +485,11 @@ msgstr "" msgid ".loc pseudo-op inside .def/.endef: ignored." msgstr "" -#: config/obj-coff.c:622 config/obj-coff.c:2362 +#: config/obj-coff.c:622 config/obj-coff.c:2359 msgid ".def pseudo-op used inside of .def/.endef: ignored." msgstr "" -#: config/obj-coff.c:668 config/obj-coff.c:2415 +#: config/obj-coff.c:668 config/obj-coff.c:2412 msgid ".endef pseudo-op used outside of .def/.endef: ignored." msgstr "" @@ -498,141 +498,141 @@ msgstr "" msgid "`%s' symbol without preceding function" msgstr "" -#: config/obj-coff.c:760 config/obj-coff.c:2490 +#: config/obj-coff.c:760 config/obj-coff.c:2487 #, c-format msgid "unexpected storage class %d" msgstr "" -#: config/obj-coff.c:873 config/obj-coff.c:2597 +#: config/obj-coff.c:873 config/obj-coff.c:2594 msgid ".dim pseudo-op used outside of .def/.endef: ignored." msgstr "" -#: config/obj-coff.c:893 config/obj-coff.c:2617 +#: config/obj-coff.c:893 config/obj-coff.c:2614 msgid "badly formed .dim directive ignored" msgstr "" -#: config/obj-coff.c:944 config/obj-coff.c:2680 +#: config/obj-coff.c:944 config/obj-coff.c:2677 msgid ".size pseudo-op used outside of .def/.endef ignored." msgstr "" -#: config/obj-coff.c:960 config/obj-coff.c:2696 +#: config/obj-coff.c:960 config/obj-coff.c:2693 msgid ".scl pseudo-op used outside of .def/.endef ignored." msgstr "" -#: config/obj-coff.c:978 config/obj-coff.c:2714 +#: config/obj-coff.c:978 config/obj-coff.c:2711 msgid ".tag pseudo-op used outside of .def/.endef ignored." msgstr "" -#: config/obj-coff.c:997 config/obj-coff.c:2732 +#: config/obj-coff.c:997 config/obj-coff.c:2729 #, c-format msgid "tag not found for .tag %s" msgstr "" -#: config/obj-coff.c:1012 config/obj-coff.c:2747 +#: config/obj-coff.c:1012 config/obj-coff.c:2744 msgid ".type pseudo-op used outside of .def/.endef ignored." msgstr "" -#: config/obj-coff.c:1034 config/obj-coff.c:2769 +#: config/obj-coff.c:1034 config/obj-coff.c:2766 msgid ".val pseudo-op used outside of .def/.endef ignored." msgstr "" -#: config/obj-coff.c:1178 config/obj-coff.c:2964 +#: config/obj-coff.c:1175 config/obj-coff.c:2961 msgid "mismatched .eb" msgstr "" -#: config/obj-coff.c:1196 config/obj-coff.c:3004 +#: config/obj-coff.c:1193 config/obj-coff.c:3001 msgid "C_EFCN symbol out of scope" msgstr "" #. STYP_INFO #. STYP_LIB #. STYP_OVER -#: config/obj-coff.c:1418 +#: config/obj-coff.c:1415 #, c-format msgid "unsupported section attribute '%c'" msgstr "" -#: config/obj-coff.c:1423 config/obj-coff.c:3710 config/tc-ppc.c:3917 +#: config/obj-coff.c:1420 config/obj-coff.c:3707 config/tc-ppc.c:3917 #, c-format msgid "unknown section attribute '%c'" msgstr "" -#: config/obj-coff.c:1453 config/tc-ppc.c:3935 read.c:2509 +#: config/obj-coff.c:1450 config/tc-ppc.c:3935 read.c:2520 #, c-format msgid "error setting flags for \"%s\": %s" msgstr "" -#: config/obj-coff.c:1464 config/obj-elf.c:727 +#: config/obj-coff.c:1461 config/obj-elf.c:727 #, c-format msgid "Ignoring changed section attributes for %s" msgstr "" -#: config/obj-coff.c:1600 +#: config/obj-coff.c:1597 #, c-format msgid "0x%lx: \"%s\" type = %ld, class = %d, segment = %d\n" msgstr "" -#: config/obj-coff.c:1785 config/obj-ieee.c:69 +#: config/obj-coff.c:1782 config/obj-ieee.c:69 msgid "Out of step\n" msgstr "" -#: config/obj-coff.c:2220 +#: config/obj-coff.c:2217 msgid "bfd_coff_swap_scnhdr_out failed" msgstr "" -#: config/obj-coff.c:2447 +#: config/obj-coff.c:2444 msgid "`.bf' symbol without preceding function\n" msgstr "" -#: config/obj-coff.c:3407 config/obj-ieee.c:522 output-file.c:52 +#: config/obj-coff.c:3404 config/obj-ieee.c:522 output-file.c:52 #: output-file.c:119 #, c-format msgid "FATAL: Can't create %s" msgstr "" -#: config/obj-coff.c:3584 +#: config/obj-coff.c:3581 #, c-format msgid "Can't close %s: %s" msgstr "" -#: config/obj-coff.c:3618 +#: config/obj-coff.c:3615 #, c-format msgid "Too many new sections; can't add \"%s\"" msgstr "" -#: config/obj-coff.c:4028 config/tc-m88k.c:1260 config/tc-sparc.c:3454 +#: config/obj-coff.c:4025 config/tc-m88k.c:1260 config/tc-sparc.c:3461 msgid "Expected comma after name" msgstr "" -#: config/obj-coff.c:4034 read.c:1953 +#: config/obj-coff.c:4031 read.c:1964 msgid "Missing size expression" msgstr "" -#: config/obj-coff.c:4040 +#: config/obj-coff.c:4037 #, c-format msgid "lcomm length (%d.) <0! Ignored." msgstr "" -#: config/obj-coff.c:4068 read.c:2187 +#: config/obj-coff.c:4065 read.c:2198 #, c-format msgid "Symbol %s already defined" msgstr "" -#: config/obj-coff.c:4162 config/tc-i960.c:3255 +#: config/obj-coff.c:4159 config/tc-i960.c:3255 #, c-format msgid "No 'bal' entry point for leafproc %s" msgstr "" -#: config/obj-coff.c:4241 write.c:2535 +#: config/obj-coff.c:4238 write.c:2533 #, c-format msgid "Negative of non-absolute symbol %s" msgstr "" -#: config/obj-coff.c:4262 write.c:2549 +#: config/obj-coff.c:4259 write.c:2547 msgid "callj to difference of 2 symbols" msgstr "" -#: config/obj-coff.c:4308 +#: config/obj-coff.c:4305 #, c-format msgid "Can't emit reloc {- %s-seg symbol \"%s\"} @ file address %ld." msgstr "" @@ -640,16 +640,16 @@ msgstr "" #. This is a COBR instruction. They have only a 13-bit #. displacement and are only to be used for local branches: #. flag as error, don't generate relocation. -#: config/obj-coff.c:4398 config/tc-i960.c:3275 write.c:2693 +#: config/obj-coff.c:4395 config/tc-i960.c:3275 write.c:2691 msgid "can't use COBR format with external label" msgstr "" -#: config/obj-coff.c:4478 +#: config/obj-coff.c:4475 #, c-format msgid "Value of %ld too large for field of %d bytes at 0x%lx" msgstr "" -#: config/obj-coff.c:4492 write.c:2792 +#: config/obj-coff.c:4489 write.c:2790 #, c-format msgid "Signed .word overflow; switch may be too large; %ld at 0x%lx" msgstr "" @@ -662,21 +662,21 @@ msgstr "" msgid "Can't set register masks" msgstr "" -#: config/obj-elf.c:310 config/tc-sparc.c:3595 config/tc-v850.c:263 +#: config/obj-elf.c:310 config/tc-sparc.c:3604 config/tc-v850.c:263 msgid "Expected comma after symbol-name" msgstr "" -#: config/obj-elf.c:317 config/tc-arc.c:779 config/tc-sparc.c:3602 +#: config/obj-elf.c:317 config/tc-arc.c:779 config/tc-sparc.c:3614 #, c-format msgid ".COMMon length (%d.) <0! Ignored." msgstr "" -#: config/obj-elf.c:327 config/tc-alpha.c:4320 config/tc-sparc.c:3612 +#: config/obj-elf.c:327 config/tc-alpha.c:4320 config/tc-sparc.c:3624 #: config/tc-v850.c:285 msgid "Ignoring attempt to re-define symbol" msgstr "" -#: config/obj-elf.c:335 config/tc-arc.c:797 config/tc-sparc.c:3620 +#: config/obj-elf.c:335 config/tc-arc.c:797 config/tc-sparc.c:3632 #: config/tc-v850.c:295 #, c-format msgid "Length of .comm \"%s\" is already %ld. Not changed to %d." @@ -691,7 +691,7 @@ msgstr "" msgid "Common alignment not a power of 2" msgstr "" -#: config/obj-elf.c:440 config/tc-arc.c:876 config/tc-sparc.c:3744 +#: config/obj-elf.c:440 config/tc-arc.c:876 config/tc-sparc.c:3756 #: config/tc-v850.c:566 #, c-format msgid "bad .common segment %s" @@ -767,32 +767,32 @@ msgstr "" msgid "missing expression in .size directive" msgstr "" -#: config/obj-elf.c:1452 +#: config/obj-elf.c:1455 #, c-format msgid "ignoring unrecognized symbol type \"%s\"" msgstr "" -#: config/obj-elf.c:1630 +#: config/obj-elf.c:1636 msgid ".size expression too complicated to fix up" msgstr "" -#: config/obj-elf.c:1661 +#: config/obj-elf.c:1667 #, c-format msgid "" "invalid attempt to declare external version name as default in symbol `%s'" msgstr "" -#: config/obj-elf.c:1793 +#: config/obj-elf.c:1799 #, c-format msgid "Failed to set up debugging information: %s" msgstr "" -#: config/obj-elf.c:1813 +#: config/obj-elf.c:1819 #, c-format msgid "Can't start writing .mdebug section: %s" msgstr "" -#: config/obj-elf.c:1821 +#: config/obj-elf.c:1827 #, c-format msgid "Could not write .mdebug section: %s" msgstr "" @@ -965,28 +965,28 @@ msgstr "" msgid "unhandled stab type %d" msgstr "" -#: config/tc-a29k.c:160 config/tc-sparc.c:3796 +#: config/tc-a29k.c:160 config/tc-sparc.c:3808 msgid "Unknown segment type" msgstr "" #. Probably a memory allocation problem? Give up now. #: config/tc-a29k.c:330 config/tc-hppa.c:1417 config/tc-i860.c:202 -#: config/tc-mips.c:1076 config/tc-mips.c:1118 config/tc-sparc.c:806 +#: config/tc-mips.c:1076 config/tc-mips.c:1118 config/tc-sparc.c:810 msgid "Broken assembler. No assembly attempted." msgstr "" -#: config/tc-a29k.c:375 config/tc-arc.c:535 config/tc-avr.c:1125 -#: config/tc-d10v.c:514 config/tc-d30v.c:553 config/tc-h8300.c:296 +#: config/tc-a29k.c:375 config/tc-arc.c:535 config/tc-avr.c:1137 +#: config/tc-d10v.c:510 config/tc-d30v.c:553 config/tc-h8300.c:296 #: config/tc-h8500.c:297 config/tc-mcore.c:656 config/tc-mn10200.c:954 #: config/tc-mn10300.c:1339 config/tc-ppc.c:1970 config/tc-sh.c:631 #: config/tc-tic80.c:283 config/tc-v850.c:2034 config/tc-w65.c:247 -#: config/tc-z8k.c:341 +#: config/tc-z8k.c:340 msgid "missing operand" msgstr "" #: config/tc-a29k.c:415 config/tc-cris.c:878 config/tc-cris.c:886 #: config/tc-hppa.c:1563 config/tc-i860.c:407 config/tc-i860.c:423 -#: config/tc-sparc.c:1369 config/tc-sparc.c:1375 +#: config/tc-sparc.c:1375 config/tc-sparc.c:1381 #, c-format msgid "Unknown opcode: `%s'" msgstr "" @@ -1053,8 +1053,8 @@ msgstr "" #: config/tc-alpha.c:1025 config/tc-arm.c:5343 config/tc-h8300.c:1373 #: config/tc-h8500.c:1201 config/tc-hppa.c:4002 config/tc-i860.c:813 -#: config/tc-m68hc11.c:480 config/tc-m68k.c:4125 config/tc-m88k.c:1106 -#: config/tc-ns32k.c:1590 config/tc-sparc.c:2757 config/tc-z8k.c:1354 +#: config/tc-m68hc11.c:480 config/tc-m68k.c:4126 config/tc-m88k.c:1106 +#: config/tc-ns32k.c:1664 config/tc-sparc.c:2763 config/tc-z8k.c:1332 msgid "Bad call to MD_ATOF()" msgstr "" @@ -1148,7 +1148,7 @@ msgstr "" msgid "operand out of range (%s not between %d and %d)" msgstr "" -#: config/tc-alpha.c:2434 config/tc-arc.c:548 config/tc-d10v.c:603 +#: config/tc-alpha.c:2434 config/tc-arc.c:548 config/tc-d10v.c:598 #: config/tc-d30v.c:636 config/tc-mn10200.c:1009 config/tc-mn10300.c:1410 #: config/tc-ppc.c:1936 config/tc-ppc.c:2044 config/tc-ppc.c:2056 #: config/tc-v850.c:1820 config/tc-v850.c:1843 config/tc-v850.c:2056 @@ -1165,7 +1165,7 @@ msgstr "" msgid "opcode `%s' not supported for target %s" msgstr "" -#: config/tc-alpha.c:2651 config/tc-alpha.c:2719 config/tc-avr.c:1092 +#: config/tc-alpha.c:2651 config/tc-alpha.c:2719 config/tc-avr.c:1103 #, c-format msgid "unknown opcode `%s'" msgstr "" @@ -1197,11 +1197,11 @@ msgstr "" msgid "macro requires $at while $at in use" msgstr "" -#: config/tc-alpha.c:3075 expr.c:86 read.c:3161 +#: config/tc-alpha.c:3075 expr.c:86 read.c:3172 msgid "bignum invalid; zero assumed" msgstr "" -#: config/tc-alpha.c:3077 expr.c:88 read.c:3163 read.c:3496 read.c:4393 +#: config/tc-alpha.c:3077 expr.c:88 read.c:3174 read.c:3507 read.c:4404 msgid "floating point number invalid; zero assumed" msgstr "" @@ -1219,13 +1219,13 @@ msgid "bad instruction format for lda !%s!%d" msgstr "" #: config/tc-alpha.c:4291 config/tc-ppc.c:1463 config/tc-ppc.c:3681 -#: read.c:1366 +#: read.c:1377 #, c-format msgid ".COMMon length (%ld.) <0! Ignored." msgstr "" #: config/tc-alpha.c:4329 config/tc-alpha.c:4338 config/tc-ppc.c:3718 -#: read.c:1390 +#: read.c:1401 #, c-format msgid "Length of .comm \"%s\" is already %ld. Not changed to %ld." msgstr "" @@ -1315,7 +1315,7 @@ msgstr "" msgid "Bad .fmask directive" msgstr "" -#: config/tc-alpha.c:5169 config/tc-arm.c:1454 read.c:2147 read.c:2734 +#: config/tc-alpha.c:5169 config/tc-arm.c:1454 read.c:2158 read.c:2745 #: stabs.c:459 #, c-format msgid "Expected comma after name \"%s\"" @@ -1364,9 +1364,9 @@ msgid "" msgstr "" #: config/tc-arc.c:155 config/tc-arc.c:178 config/tc-arc.c:922 -#: config/tc-hppa.c:1377 config/tc-hppa.c:6874 config/tc-hppa.c:6880 -#: config/tc-hppa.c:6886 config/tc-hppa.c:6892 config/tc-mn10300.c:928 -#: config/tc-mn10300.c:2057 +#: config/tc-hppa.c:1377 config/tc-hppa.c:6898 config/tc-hppa.c:6904 +#: config/tc-hppa.c:6910 config/tc-hppa.c:6916 config/tc-mn10300.c:928 +#: config/tc-mn10300.c:2058 msgid "could not set architecture and machine" msgstr "" @@ -1374,7 +1374,7 @@ msgstr "" msgid "virtual memory exhausted" msgstr "" -#: config/tc-arc.c:254 config/tc-mn10200.c:1374 config/tc-mn10300.c:1969 +#: config/tc-arc.c:254 config/tc-mn10200.c:1374 config/tc-mn10300.c:1970 #: config/tc-ppc.c:1220 config/tc-v850.c:1619 #, c-format msgid "operand out of range (%s not between %ld and %ld)" @@ -1389,7 +1389,7 @@ msgstr "" msgid "too many suffixes" msgstr "" -#: config/tc-arc.c:533 config/tc-d10v.c:512 config/tc-d30v.c:551 +#: config/tc-arc.c:533 config/tc-d10v.c:508 config/tc-d30v.c:551 #: config/tc-mn10200.c:951 config/tc-mn10300.c:1336 config/tc-ppc.c:1968 #: config/tc-tic80.c:279 config/tc-v850.c:2031 msgid "illegal operand" @@ -1450,7 +1450,7 @@ msgstr "" msgid "invalid symbol to rename to" msgstr "" -#: config/tc-arc.c:1010 config/tc-avr.c:366 config/tc-d10v.c:291 +#: config/tc-arc.c:1010 config/tc-avr.c:373 config/tc-d10v.c:290 #: config/tc-d30v.c:366 config/tc-mips.c:8781 config/tc-mn10200.c:375 #: config/tc-pj.c:356 config/tc-ppc.c:4510 config/tc-sh.c:1819 #: config/tc-v850.c:1278 @@ -1466,8 +1466,8 @@ msgstr "" msgid "expression too complex for %%st" msgstr "" -#: config/tc-arc.c:1326 config/tc-arm.c:3318 config/tc-avr.c:857 -#: config/tc-cris.c:2713 config/tc-d10v.c:1532 config/tc-d30v.c:1837 +#: config/tc-arc.c:1326 config/tc-arm.c:3318 config/tc-avr.c:865 +#: config/tc-cris.c:2713 config/tc-d10v.c:1536 config/tc-d30v.c:1837 #: config/tc-mips.c:3264 config/tc-mips.c:4196 config/tc-mips.c:4981 #: config/tc-mips.c:5527 config/tc-ppc.c:4846 config/tc-v850.c:2341 msgid "expression too complex" @@ -1477,7 +1477,7 @@ msgstr "" msgid "unresolved expression that must be resolved" msgstr "" -#: config/tc-arc.c:1457 config/tc-sparc.c:3303 +#: config/tc-arc.c:1457 config/tc-sparc.c:3311 #, c-format msgid "internal error: can't export reloc type %d (`%s')" msgstr "" @@ -1490,16 +1490,16 @@ msgstr "" msgid "Invalid syntax for .req directive." msgstr "" -#: config/tc-arm.c:1364 config/tc-mips.c:10009 read.c:2032 +#: config/tc-arm.c:1364 config/tc-mips.c:10009 read.c:2043 #, c-format msgid "Alignment too large: %d. assumed." msgstr "" -#: config/tc-arm.c:1367 read.c:2037 +#: config/tc-arm.c:1367 read.c:2048 msgid "Alignment negative. 0 assumed." msgstr "" -#: config/tc-arm.c:1503 config/tc-m32r.c:418 read.c:2792 read.c:4853 +#: config/tc-arm.c:1503 config/tc-m32r.c:418 read.c:2803 read.c:4864 #, c-format msgid "symbol `%s' already defined" msgstr "" @@ -1973,7 +1973,7 @@ msgid "Internal_relocation (type %d) not fixed up (OFFSET_IMM)" msgstr "" #: config/tc-arm.c:6187 config/tc-cris.c:2648 config/tc-mcore.c:2110 -#: config/tc-ns32k.c:2284 +#: config/tc-ns32k.c:2370 msgid "" msgstr "" @@ -2094,11 +2094,11 @@ msgstr "" msgid "%s: unexpected function type: %d" msgstr "" -#: config/tc-avr.c:185 +#: config/tc-avr.c:186 msgid "Known MCU names:" msgstr "" -#: config/tc-avr.c:250 +#: config/tc-avr.c:255 msgid "" "AVR options:\n" " -mmcu=[avr-name] select microcontroller variant\n" @@ -2111,7 +2111,7 @@ msgid "" " or immediate microcontroller name.\n" msgstr "" -#: config/tc-avr.c:260 +#: config/tc-avr.c:265 msgid "" " -mall-opcodes accept all AVR opcodes, even if not supported by MCU\n" " -mno-skip-bug disable warnings for skipping two-word instructions\n" @@ -2120,145 +2120,145 @@ msgid "" " (default for avr3, avr5)\n" msgstr "" -#: config/tc-avr.c:307 +#: config/tc-avr.c:313 #, c-format msgid "unknown MCU: %s\n" msgstr "" -#: config/tc-avr.c:317 +#: config/tc-avr.c:322 #, c-format msgid "redefinition of mcu type `%s' to `%s'" msgstr "" -#: config/tc-avr.c:430 +#: config/tc-avr.c:436 msgid "constant value required" msgstr "" -#: config/tc-avr.c:433 +#: config/tc-avr.c:439 #, c-format msgid "number must be less than %d" msgstr "" -#: config/tc-avr.c:484 +#: config/tc-avr.c:491 msgid "`,' required" msgstr "" -#: config/tc-avr.c:507 +#: config/tc-avr.c:515 msgid "undefined combination of operands" msgstr "" -#: config/tc-avr.c:520 +#: config/tc-avr.c:528 msgid "skipping two-word instruction" msgstr "" -#: config/tc-avr.c:586 +#: config/tc-avr.c:592 msgid "register r16-r23 required" msgstr "" -#: config/tc-avr.c:592 +#: config/tc-avr.c:598 msgid "register number above 15 required" msgstr "" -#: config/tc-avr.c:598 +#: config/tc-avr.c:604 msgid "even register number required" msgstr "" -#: config/tc-avr.c:605 +#: config/tc-avr.c:611 msgid "register r24, r26, r28 or r30 required" msgstr "" -#: config/tc-avr.c:611 +#: config/tc-avr.c:617 msgid "register name or number from 0 to 31 required" msgstr "" -#: config/tc-avr.c:629 +#: config/tc-avr.c:635 msgid "pointer register (X, Y or Z) required" msgstr "" -#: config/tc-avr.c:636 +#: config/tc-avr.c:642 msgid "cannot both predecrement and postincrement" msgstr "" -#: config/tc-avr.c:645 +#: config/tc-avr.c:650 msgid "addressing mode not supported" msgstr "" -#: config/tc-avr.c:652 +#: config/tc-avr.c:656 msgid "can't predecrement" msgstr "" -#: config/tc-avr.c:655 +#: config/tc-avr.c:659 msgid "pointer register Z required" msgstr "" -#: config/tc-avr.c:672 +#: config/tc-avr.c:677 msgid "pointer register (Y or Z) required" msgstr "" -#: config/tc-avr.c:781 +#: config/tc-avr.c:782 #, c-format msgid "unknown constraint `%c'" msgstr "" -#: config/tc-avr.c:886 config/tc-avr.c:900 config/tc-avr.c:999 +#: config/tc-avr.c:895 config/tc-avr.c:911 config/tc-avr.c:1012 #, c-format msgid "odd address operand: %ld" msgstr "" -#: config/tc-avr.c:892 config/tc-avr.c:910 +#: config/tc-avr.c:903 config/tc-avr.c:922 #, c-format msgid "operand out of range: %ld" msgstr "" -#: config/tc-avr.c:1008 config/tc-d10v.c:1601 config/tc-d30v.c:1962 +#: config/tc-avr.c:1021 config/tc-d10v.c:1607 config/tc-d30v.c:1962 #, c-format msgid "line %d: unknown relocation type: 0x%x" msgstr "" -#: config/tc-avr.c:1022 +#: config/tc-avr.c:1035 msgid "only constant expression allowed" msgstr "" -#: config/tc-avr.c:1061 config/tc-d10v.c:1469 config/tc-d30v.c:1781 +#: config/tc-avr.c:1073 config/tc-d10v.c:1471 config/tc-d30v.c:1781 #: config/tc-mn10200.c:1254 config/tc-mn10300.c:1827 config/tc-ppc.c:5153 #: config/tc-v850.c:2258 #, c-format msgid "reloc %d not supported by object file format" msgstr "" -#: config/tc-avr.c:1086 config/tc-d10v.c:1085 config/tc-d10v.c:1099 +#: config/tc-avr.c:1097 config/tc-d10v.c:1078 config/tc-d10v.c:1092 #: config/tc-h8300.c:1239 config/tc-h8500.c:1102 config/tc-mcore.c:989 -#: config/tc-pj.c:265 config/tc-sh.c:1431 config/tc-z8k.c:1222 +#: config/tc-pj.c:265 config/tc-sh.c:1431 config/tc-z8k.c:1203 msgid "can't find opcode " msgstr "" -#: config/tc-avr.c:1103 +#: config/tc-avr.c:1114 #, c-format msgid "illegal opcode %s for mcu %s" msgstr "" -#: config/tc-avr.c:1111 +#: config/tc-avr.c:1122 msgid "garbage at end of line" msgstr "" -#: config/tc-avr.c:1169 +#: config/tc-avr.c:1186 msgid "illegal expression" msgstr "" -#: config/tc-avr.c:1191 config/tc-avr.c:1251 +#: config/tc-avr.c:1212 config/tc-avr.c:1278 msgid "`)' required" msgstr "" -#: config/tc-avr.c:1209 +#: config/tc-avr.c:1232 #, c-format msgid "constant out of 8-bit range: %d" msgstr "" -#: config/tc-avr.c:1212 +#: config/tc-avr.c:1235 msgid "expression possibly out of 8-bit range" msgstr "" -#: config/tc-avr.c:1276 config/tc-avr.c:1283 +#: config/tc-avr.c:1306 config/tc-avr.c:1313 #, c-format msgid "illegal %srelocation size: %d" msgstr "" @@ -2442,90 +2442,90 @@ msgstr "" msgid "Adjusted signed .word (%ld) overflows: `switch'-statement too large." msgstr "" -#: config/tc-d10v.c:235 +#: config/tc-d10v.c:233 msgid "" "D10V options:\n" "-O optimize. Will do some operations in parallel.\n" msgstr "" -#: config/tc-d10v.c:554 config/tc-d10v.c:636 config/tc-d30v.c:652 +#: config/tc-d10v.c:550 config/tc-d10v.c:632 config/tc-d30v.c:652 #, c-format msgid "operand out of range: %d" msgstr "" -#: config/tc-d10v.c:697 +#: config/tc-d10v.c:694 msgid "Instruction must be executed in parallel with another instruction." msgstr "" -#: config/tc-d10v.c:752 +#: config/tc-d10v.c:750 msgid "Instruction must be executed in parallel" msgstr "" -#: config/tc-d10v.c:755 +#: config/tc-d10v.c:753 msgid "Long instructions may not be combined." msgstr "" -#: config/tc-d10v.c:797 +#: config/tc-d10v.c:795 msgid "One of these instructions may not be executed in parallel." msgstr "" -#: config/tc-d10v.c:801 config/tc-d30v.c:866 +#: config/tc-d10v.c:799 config/tc-d30v.c:866 msgid "Two IU instructions may not be executed in parallel" msgstr "" -#: config/tc-d10v.c:803 config/tc-d10v.c:811 config/tc-d10v.c:829 -#: config/tc-d10v.c:847 config/tc-d30v.c:867 config/tc-d30v.c:876 +#: config/tc-d10v.c:801 config/tc-d10v.c:809 config/tc-d10v.c:826 +#: config/tc-d10v.c:843 config/tc-d30v.c:867 config/tc-d30v.c:876 msgid "Swapping instruction order" msgstr "" -#: config/tc-d10v.c:809 config/tc-d30v.c:873 +#: config/tc-d10v.c:807 config/tc-d30v.c:873 msgid "Two MU instructions may not be executed in parallel" msgstr "" -#: config/tc-d10v.c:833 config/tc-d30v.c:893 +#: config/tc-d10v.c:830 config/tc-d30v.c:893 msgid "IU instruction may not be in the left container" msgstr "" -#: config/tc-d10v.c:835 config/tc-d10v.c:853 +#: config/tc-d10v.c:832 config/tc-d10v.c:849 msgid "" "Instruction in R container is squashed by flow control instruction in L " "container." msgstr "" -#: config/tc-d10v.c:851 config/tc-d30v.c:904 +#: config/tc-d10v.c:847 config/tc-d30v.c:904 msgid "MU instruction may not be in the right container" msgstr "" -#: config/tc-d10v.c:860 config/tc-d30v.c:916 +#: config/tc-d10v.c:855 config/tc-d30v.c:916 msgid "unknown execution type passed to write_2_short()" msgstr "" -#: config/tc-d10v.c:1112 config/tc-d10v.c:1130 config/tc-d30v.c:1394 +#: config/tc-d10v.c:1106 config/tc-d10v.c:1127 config/tc-d30v.c:1394 msgid "Unable to mix instructions as specified" msgstr "" -#: config/tc-d10v.c:1178 config/tc-d30v.c:1529 +#: config/tc-d10v.c:1174 config/tc-d30v.c:1529 #, c-format msgid "unknown opcode: %s" msgstr "" -#: config/tc-d10v.c:1259 config/tc-d10v.c:1426 config/tc-tic80.c:536 +#: config/tc-d10v.c:1256 config/tc-d10v.c:1427 config/tc-tic80.c:536 msgid "bad opcode or operands" msgstr "" -#: config/tc-d10v.c:1329 config/tc-m68k.c:4232 +#: config/tc-d10v.c:1329 config/tc-m68k.c:4233 msgid "value out of range" msgstr "" -#: config/tc-d10v.c:1401 +#: config/tc-d10v.c:1402 msgid "illegal operand - register name found where none expected" msgstr "" -#: config/tc-d10v.c:1437 config/tc-tic80.c:547 +#: config/tc-d10v.c:1438 config/tc-tic80.c:547 msgid "Register number must be EVEN" msgstr "" -#: config/tc-d10v.c:1582 +#: config/tc-d10v.c:1587 #, c-format msgid "line %d: rep or repi must include at least 4 instructions" msgstr "" @@ -2762,7 +2762,7 @@ msgid "invalid operands" msgstr "" #: config/tc-h8300.c:1250 config/tc-h8500.c:1108 config/tc-mips.c:7977 -#: config/tc-sh.c:1660 config/tc-w65.c:739 config/tc-z8k.c:1234 +#: config/tc-sh.c:1660 config/tc-w65.c:739 config/tc-z8k.c:1213 msgid "unknown opcode" msgstr "" @@ -2771,24 +2771,24 @@ msgid "mismatch between opcode size and operand size" msgstr "" #: config/tc-h8300.c:1307 config/tc-h8500.c:1135 config/tc-sh.c:1774 -#: config/tc-w65.c:769 config/tc-z8k.c:1289 +#: config/tc-w65.c:769 config/tc-z8k.c:1266 msgid "call to tc_crawl_symbol_chain \n" msgstr "" #: config/tc-h8300.c:1321 config/tc-h8500.c:1149 config/tc-sh.c:1781 -#: config/tc-w65.c:783 config/tc-z8k.c:1303 +#: config/tc-w65.c:783 config/tc-z8k.c:1280 msgid "call to tc_headers_hook \n" msgstr "" -#: config/tc-h8300.c:1412 config/tc-h8500.c:1239 config/tc-z8k.c:1414 +#: config/tc-h8300.c:1412 config/tc-h8500.c:1239 config/tc-z8k.c:1394 msgid "call to tc_aout_fix_to_chars \n" msgstr "" -#: config/tc-h8300.c:1422 config/tc-z8k.c:1424 +#: config/tc-h8300.c:1422 config/tc-z8k.c:1404 msgid "call to md_convert_frag \n" msgstr "" -#: config/tc-h8300.c:1467 config/tc-z8k.c:1499 +#: config/tc-h8300.c:1467 config/tc-z8k.c:1485 msgid "call tomd_estimate_size_before_relax \n" msgstr "" @@ -2856,7 +2856,7 @@ msgstr "" msgid "-R option not supported on this target." msgstr "" -#: config/tc-hppa.c:1399 config/tc-sparc.c:763 config/tc-sparc.c:798 +#: config/tc-hppa.c:1399 config/tc-sparc.c:767 config/tc-sparc.c:802 #, c-format msgid "Internal error: can't hash `%s': %s\n" msgstr "" @@ -2866,15 +2866,15 @@ msgstr "" msgid "internal error: losing opcode: `%s' \"%s\"\n" msgstr "" -#: config/tc-hppa.c:1476 config/tc-hppa.c:7013 config/tc-hppa.c:7068 +#: config/tc-hppa.c:1476 config/tc-hppa.c:7037 config/tc-hppa.c:7092 msgid "Missing function name for .PROC (corrupted label chain)" msgstr "" -#: config/tc-hppa.c:1479 config/tc-hppa.c:7071 +#: config/tc-hppa.c:1479 config/tc-hppa.c:7095 msgid "Missing function name for .PROC" msgstr "" -#: config/tc-hppa.c:1600 config/tc-hppa.c:4891 +#: config/tc-hppa.c:1600 config/tc-hppa.c:4915 msgid "could not update architecture and machine" msgstr "" @@ -2974,253 +2974,261 @@ msgstr "" msgid "Invalid operands %s" msgstr "" -#: config/tc-hppa.c:4591 +#: config/tc-hppa.c:4399 +msgid " -Q ignored\n" +msgstr "" + +#: config/tc-hppa.c:4403 +msgid " -c print a warning if a comment is found\n" +msgstr "" + +#: config/tc-hppa.c:4615 msgid "Unknown relocation encountered in md_apply_fix." msgstr "" -#: config/tc-hppa.c:4601 +#: config/tc-hppa.c:4625 #, c-format msgid "no hppa_fixup entry for this fixup (fixP = 0x%x, type = 0x%x)\n" msgstr "" -#: config/tc-hppa.c:4743 config/tc-hppa.c:4768 +#: config/tc-hppa.c:4767 config/tc-hppa.c:4792 #, c-format msgid "Undefined register: '%s'." msgstr "" -#: config/tc-hppa.c:4806 +#: config/tc-hppa.c:4830 #, c-format msgid "Non-absolute symbol: '%s'." msgstr "" -#: config/tc-hppa.c:4821 +#: config/tc-hppa.c:4845 #, c-format msgid "Undefined absolute constant: '%s'." msgstr "" -#: config/tc-hppa.c:4930 +#: config/tc-hppa.c:4954 #, c-format msgid "Invalid FP Compare Condition: %s" msgstr "" -#: config/tc-hppa.c:4986 +#: config/tc-hppa.c:5010 #, c-format msgid "Invalid FTEST completer: %s" msgstr "" -#: config/tc-hppa.c:5053 config/tc-hppa.c:5091 +#: config/tc-hppa.c:5077 config/tc-hppa.c:5115 #, c-format msgid "Invalid FP Operand Format: %3s" msgstr "" -#: config/tc-hppa.c:5170 +#: config/tc-hppa.c:5194 msgid "Bad segment in expression." msgstr "" -#: config/tc-hppa.c:5229 +#: config/tc-hppa.c:5253 msgid "Bad segment (should be absolute)." msgstr "" -#: config/tc-hppa.c:5272 +#: config/tc-hppa.c:5296 #, c-format msgid "Invalid argument location: %s\n" msgstr "" -#: config/tc-hppa.c:5303 +#: config/tc-hppa.c:5327 #, c-format msgid "Invalid argument description: %d" msgstr "" -#: config/tc-hppa.c:5326 +#: config/tc-hppa.c:5350 #, c-format msgid "Invalid Nullification: (%c)" msgstr "" -#: config/tc-hppa.c:6068 +#: config/tc-hppa.c:6092 #, c-format msgid "Invalid .CALL argument: %s" msgstr "" -#: config/tc-hppa.c:6200 +#: config/tc-hppa.c:6224 msgid ".callinfo is not within a procedure definition" msgstr "" -#: config/tc-hppa.c:6220 +#: config/tc-hppa.c:6244 #, c-format msgid "FRAME parameter must be a multiple of 8: %d\n" msgstr "" -#: config/tc-hppa.c:6239 +#: config/tc-hppa.c:6263 msgid "Value for ENTRY_GR must be in the range 3..18\n" msgstr "" -#: config/tc-hppa.c:6251 +#: config/tc-hppa.c:6275 msgid "Value for ENTRY_FR must be in the range 12..21\n" msgstr "" -#: config/tc-hppa.c:6261 +#: config/tc-hppa.c:6285 msgid "Value for ENTRY_SR must be 3\n" msgstr "" -#: config/tc-hppa.c:6317 +#: config/tc-hppa.c:6341 #, c-format msgid "Invalid .CALLINFO argument: %s" msgstr "" -#: config/tc-hppa.c:6428 +#: config/tc-hppa.c:6452 msgid "The .ENTER pseudo-op is not supported" msgstr "" -#: config/tc-hppa.c:6444 +#: config/tc-hppa.c:6468 msgid "Misplaced .entry. Ignored." msgstr "" -#: config/tc-hppa.c:6448 +#: config/tc-hppa.c:6472 msgid "Missing .callinfo." msgstr "" -#: config/tc-hppa.c:6496 +#: config/tc-hppa.c:6520 msgid ".REG must use a label" msgstr "" -#: config/tc-hppa.c:6498 +#: config/tc-hppa.c:6522 msgid ".EQU must use a label" msgstr "" -#: config/tc-hppa.c:6551 +#: config/tc-hppa.c:6575 msgid ".EXIT must appear within a procedure" msgstr "" -#: config/tc-hppa.c:6555 +#: config/tc-hppa.c:6579 msgid "Missing .callinfo" msgstr "" -#: config/tc-hppa.c:6559 +#: config/tc-hppa.c:6583 msgid "No .ENTRY for this .EXIT" msgstr "" -#: config/tc-hppa.c:6586 +#: config/tc-hppa.c:6610 #, c-format msgid "Cannot define export symbol: %s\n" msgstr "" -#: config/tc-hppa.c:6643 +#: config/tc-hppa.c:6667 #, c-format msgid "Using ENTRY rather than CODE in export directive for %s" msgstr "" -#: config/tc-hppa.c:6753 +#: config/tc-hppa.c:6777 #, c-format msgid "Undefined .EXPORT/.IMPORT argument (ignored): %s" msgstr "" -#: config/tc-hppa.c:6835 +#: config/tc-hppa.c:6859 msgid "Missing label name on .LABEL" msgstr "" -#: config/tc-hppa.c:6840 +#: config/tc-hppa.c:6864 msgid "extra .LABEL arguments ignored." msgstr "" -#: config/tc-hppa.c:6857 +#: config/tc-hppa.c:6881 msgid "The .LEAVE pseudo-op is not supported" msgstr "" -#: config/tc-hppa.c:6896 +#: config/tc-hppa.c:6920 msgid "Unrecognized .LEVEL argument\n" msgstr "" -#: config/tc-hppa.c:6932 +#: config/tc-hppa.c:6956 #, c-format msgid "Cannot define static symbol: %s\n" msgstr "" -#: config/tc-hppa.c:6967 +#: config/tc-hppa.c:6991 msgid "Nested procedures" msgstr "" -#: config/tc-hppa.c:6977 +#: config/tc-hppa.c:7001 msgid "Cannot allocate unwind descriptor\n" msgstr "" -#: config/tc-hppa.c:7075 +#: config/tc-hppa.c:7099 msgid "misplaced .procend" msgstr "" -#: config/tc-hppa.c:7078 +#: config/tc-hppa.c:7102 msgid "Missing .callinfo for this procedure" msgstr "" -#: config/tc-hppa.c:7081 +#: config/tc-hppa.c:7105 msgid "Missing .EXIT for a .ENTRY" msgstr "" -#: config/tc-hppa.c:7120 +#: config/tc-hppa.c:7144 msgid "Not in a space.\n" msgstr "" -#: config/tc-hppa.c:7123 +#: config/tc-hppa.c:7147 msgid "Not in a subspace.\n" msgstr "" -#: config/tc-hppa.c:7213 +#: config/tc-hppa.c:7237 msgid "Invalid .SPACE argument" msgstr "" -#: config/tc-hppa.c:7261 +#: config/tc-hppa.c:7285 msgid "Can't change spaces within a procedure definition. Ignored" msgstr "" -#: config/tc-hppa.c:7388 +#: config/tc-hppa.c:7412 #, c-format msgid "Undefined space: '%s' Assuming space number = 0." msgstr "" -#: config/tc-hppa.c:7412 +#: config/tc-hppa.c:7436 msgid "Must be in a space before changing or declaring subspaces.\n" msgstr "" -#: config/tc-hppa.c:7416 +#: config/tc-hppa.c:7440 msgid "Can't change subspaces within a procedure definition. Ignored" msgstr "" -#: config/tc-hppa.c:7451 +#: config/tc-hppa.c:7475 msgid "Parameters of an existing subspace can't be modified" msgstr "" -#: config/tc-hppa.c:7502 +#: config/tc-hppa.c:7526 msgid "Alignment must be a power of 2" msgstr "" -#: config/tc-hppa.c:7544 +#: config/tc-hppa.c:7568 msgid "FIRST not supported as a .SUBSPACE argument" msgstr "" -#: config/tc-hppa.c:7546 +#: config/tc-hppa.c:7570 msgid "Invalid .SUBSPACE argument" msgstr "" -#: config/tc-hppa.c:7729 +#: config/tc-hppa.c:7753 #, c-format msgid "Internal error: Unable to find containing space for %s." msgstr "" -#: config/tc-hppa.c:7770 +#: config/tc-hppa.c:7794 #, c-format msgid "Out of memory: could not allocate new space chain entry: %s\n" msgstr "" -#: config/tc-hppa.c:7856 +#: config/tc-hppa.c:7880 #, c-format msgid "Out of memory: could not allocate new subspace chain entry: %s\n" msgstr "" -#: config/tc-hppa.c:8523 +#: config/tc-hppa.c:8547 #, c-format msgid "Symbol '%s' could not be created." msgstr "" -#: config/tc-hppa.c:8527 +#: config/tc-hppa.c:8551 msgid "No memory for symbol name." msgstr "" @@ -3246,7 +3254,7 @@ msgstr "" msgid "missing cpu architecture" msgstr "" -#: config/tc-i386.c:722 config/tc-m68k.c:3748 +#: config/tc-i386.c:722 config/tc-m68k.c:3749 #, c-format msgid "Internal Error: Can't hash %s: %s" msgstr "" @@ -3576,7 +3584,7 @@ msgstr "" msgid "5-bit immediate too large" msgstr "" -#: config/tc-i860.c:749 config/tc-sparc.c:2660 +#: config/tc-i860.c:749 config/tc-sparc.c:2667 msgid "bad segment" msgstr "" @@ -4037,7 +4045,7 @@ msgid "" "is this intentional ?" msgstr "" -#: config/tc-m32r.c:1235 config/tc-ppc.c:1455 config/tc-ppc.c:3673 read.c:1355 +#: config/tc-m32r.c:1235 config/tc-ppc.c:1455 config/tc-ppc.c:3673 read.c:1366 msgid "Expected comma after symbol-name: rest of line ignored." msgstr "" @@ -4051,8 +4059,8 @@ msgstr "" msgid "ignoring bad alignment" msgstr "" -#: config/tc-m32r.c:1284 config/tc-ppc.c:1488 config/tc-ppc.c:3709 read.c:1379 -#: read.c:2105 +#: config/tc-m32r.c:1284 config/tc-ppc.c:1488 config/tc-ppc.c:3709 read.c:1390 +#: read.c:2116 #, c-format msgid "Ignoring attempt to re-define symbol `%s'." msgstr "" @@ -4382,351 +4390,355 @@ msgstr "" msgid "Line %d: unknown relocation type: 0x%x." msgstr "" -#: config/tc-m68k.c:646 +#: config/tc-m68k.c:647 msgid "Unknown PC relative instruction" msgstr "" -#: config/tc-m68k.c:772 +#: config/tc-m68k.c:773 #, c-format msgid "Can not do %d byte pc-relative relocation" msgstr "" -#: config/tc-m68k.c:774 +#: config/tc-m68k.c:775 #, c-format msgid "Can not do %d byte pc-relative pic relocation" msgstr "" -#: config/tc-m68k.c:779 +#: config/tc-m68k.c:780 #, c-format msgid "Can not do %d byte relocation" msgstr "" -#: config/tc-m68k.c:781 +#: config/tc-m68k.c:782 #, c-format msgid "Can not do %d byte pic relocation" msgstr "" -#: config/tc-m68k.c:885 config/tc-mips.c:11330 +#: config/tc-m68k.c:886 config/tc-mips.c:11330 #, c-format msgid "Cannot make %s relocation PC relative" msgstr "" -#: config/tc-m68k.c:998 config/tc-tahoe.c:1505 config/tc-vax.c:1774 +#: config/tc-m68k.c:999 config/tc-tahoe.c:1505 config/tc-vax.c:1774 msgid "No operator" msgstr "" -#: config/tc-m68k.c:1028 config/tc-tahoe.c:1522 config/tc-vax.c:1791 +#: config/tc-m68k.c:1029 config/tc-tahoe.c:1522 config/tc-vax.c:1791 msgid "Unknown operator" msgstr "" -#: config/tc-m68k.c:1803 +#: config/tc-m68k.c:1804 msgid "invalid instruction for this architecture; needs " msgstr "" -#: config/tc-m68k.c:1808 +#: config/tc-m68k.c:1809 msgid "fpu (68040, 68060 or 68881/68882)" msgstr "" -#: config/tc-m68k.c:1811 +#: config/tc-m68k.c:1812 msgid "mmu (68030 or 68851)" msgstr "" -#: config/tc-m68k.c:1814 +#: config/tc-m68k.c:1815 msgid "68020 or higher" msgstr "" -#: config/tc-m68k.c:1817 +#: config/tc-m68k.c:1818 msgid "68000 or higher" msgstr "" -#: config/tc-m68k.c:1820 +#: config/tc-m68k.c:1821 msgid "68010 or higher" msgstr "" -#: config/tc-m68k.c:1849 +#: config/tc-m68k.c:1850 msgid "operands mismatch" msgstr "" -#: config/tc-m68k.c:1906 config/tc-m68k.c:1912 config/tc-m68k.c:1918 +#: config/tc-m68k.c:1907 config/tc-m68k.c:1913 config/tc-m68k.c:1919 msgid "operand out of range" msgstr "" -#: config/tc-m68k.c:1975 +#: config/tc-m68k.c:1976 #, c-format msgid "Bignum too big for %c format; truncated" msgstr "" -#: config/tc-m68k.c:2043 +#: config/tc-m68k.c:2044 msgid "displacement too large for this architecture; needs 68020 or higher" msgstr "" -#: config/tc-m68k.c:2153 +#: config/tc-m68k.c:2154 msgid "" "scale factor invalid on this architecture; needs cpu32 or 68020 or higher" msgstr "" -#: config/tc-m68k.c:2158 +#: config/tc-m68k.c:2159 msgid "invalid index size for coldfire" msgstr "" -#: config/tc-m68k.c:2211 +#: config/tc-m68k.c:2212 msgid "Forcing byte displacement" msgstr "" -#: config/tc-m68k.c:2213 +#: config/tc-m68k.c:2214 msgid "byte displacement out of range" msgstr "" -#: config/tc-m68k.c:2260 config/tc-m68k.c:2298 +#: config/tc-m68k.c:2261 config/tc-m68k.c:2299 msgid "invalid operand mode for this architecture; needs 68020 or higher" msgstr "" -#: config/tc-m68k.c:2284 config/tc-m68k.c:2318 +#: config/tc-m68k.c:2285 config/tc-m68k.c:2319 msgid ":b not permitted; defaulting to :w" msgstr "" -#: config/tc-m68k.c:2397 +#: config/tc-m68k.c:2398 msgid "unsupported byte value; use a different suffix" msgstr "" -#: config/tc-m68k.c:2411 +#: config/tc-m68k.c:2412 msgid "unknown/incorrect operand" msgstr "" -#: config/tc-m68k.c:2444 config/tc-m68k.c:2452 config/tc-m68k.c:2459 -#: config/tc-m68k.c:2466 +#: config/tc-m68k.c:2445 config/tc-m68k.c:2453 config/tc-m68k.c:2460 +#: config/tc-m68k.c:2467 msgid "out of range" msgstr "" -#: config/tc-m68k.c:2516 +#: config/tc-m68k.c:2517 msgid "Can't use long branches on 68000/68010/5200" msgstr "" -#: config/tc-m68k.c:2604 +#: config/tc-m68k.c:2605 msgid "Expression out of range, using 0" msgstr "" -#: config/tc-m68k.c:2716 config/tc-m68k.c:2732 +#: config/tc-m68k.c:2717 config/tc-m68k.c:2733 msgid "Floating point register in register list" msgstr "" -#: config/tc-m68k.c:2722 +#: config/tc-m68k.c:2723 msgid "Wrong register in floating-point reglist" msgstr "" -#: config/tc-m68k.c:2738 +#: config/tc-m68k.c:2739 msgid "incorrect register in reglist" msgstr "" -#: config/tc-m68k.c:2744 +#: config/tc-m68k.c:2745 msgid "wrong register in floating-point reglist" msgstr "" -#: config/tc-m68k.c:2820 +#: config/tc-m68k.c:2821 msgid "failed sanity check" msgstr "" #. ERROR -#: config/tc-m68k.c:3185 +#: config/tc-m68k.c:3186 msgid "Extra )" msgstr "" #. ERROR -#: config/tc-m68k.c:3196 +#: config/tc-m68k.c:3197 msgid "Missing )" msgstr "" -#: config/tc-m68k.c:3213 +#: config/tc-m68k.c:3214 msgid "Missing operand" msgstr "" -#: config/tc-m68k.c:3545 +#: config/tc-m68k.c:3546 #, c-format msgid "%s -- statement `%s' ignored" msgstr "" -#: config/tc-m68k.c:3589 +#: config/tc-m68k.c:3590 #, c-format msgid "Don't know how to figure width of %c in md_assemble()" msgstr "" -#: config/tc-m68k.c:3757 config/tc-m68k.c:3795 +#: config/tc-m68k.c:3758 config/tc-m68k.c:3796 #, c-format msgid "Internal Error: Can't find %s in hash table" msgstr "" -#: config/tc-m68k.c:3760 config/tc-m68k.c:3798 +#: config/tc-m68k.c:3761 config/tc-m68k.c:3799 #, c-format msgid "Internal Error: Can't hash %s: %s" msgstr "" -#: config/tc-m68k.c:3926 +#: config/tc-m68k.c:3927 #, c-format msgid "unrecognized default cpu `%s' ???" msgstr "" -#: config/tc-m68k.c:3938 +#: config/tc-m68k.c:3939 msgid "68040 and 68851 specified; mmu instructions may assemble incorrectly" msgstr "" -#: config/tc-m68k.c:3958 +#: config/tc-m68k.c:3959 msgid "options for 68881 and no-68881 both given" msgstr "" -#: config/tc-m68k.c:3960 +#: config/tc-m68k.c:3961 msgid "options for 68851 and no-68851 both given" msgstr "" -#: config/tc-m68k.c:4031 +#: config/tc-m68k.c:4032 #, c-format msgid "text label `%s' aligned to odd boundary" msgstr "" -#: config/tc-m68k.c:4248 +#: config/tc-m68k.c:4249 msgid "invalid byte branch offset" msgstr "" -#: config/tc-m68k.c:4305 +#: config/tc-m68k.c:4306 msgid "short branch with zero offset: use :w" msgstr "" -#: config/tc-m68k.c:4415 +#: config/tc-m68k.c:4324 config/tc-m68k.c:4371 config/tc-m68k.c:4391 +msgid "long branch not supported" +msgstr "" + +#: config/tc-m68k.c:4434 #, c-format msgid "Internal error (long PC-relative operand) for insn 0x%04x at 0x%lx" msgstr "" -#: config/tc-m68k.c:4446 +#: config/tc-m68k.c:4465 msgid "displacement doesn't fit in one byte" msgstr "" -#: config/tc-m68k.c:4909 config/tc-m68k.c:4920 +#: config/tc-m68k.c:4941 config/tc-m68k.c:4952 msgid "expression out of range: defaulting to 1" msgstr "" -#: config/tc-m68k.c:4952 +#: config/tc-m68k.c:4984 msgid "expression out of range: defaulting to 0" msgstr "" -#: config/tc-m68k.c:4985 config/tc-m68k.c:4997 +#: config/tc-m68k.c:5017 config/tc-m68k.c:5029 #, c-format msgid "Can't deal with expression; defaulting to %ld" msgstr "" -#: config/tc-m68k.c:5011 +#: config/tc-m68k.c:5043 msgid "expression doesn't fit in BYTE" msgstr "" -#: config/tc-m68k.c:5015 +#: config/tc-m68k.c:5047 msgid "expression doesn't fit in WORD" msgstr "" -#: config/tc-m68k.c:5108 +#: config/tc-m68k.c:5140 #, c-format msgid "%s: unrecognized processor name" msgstr "" -#: config/tc-m68k.c:5173 +#: config/tc-m68k.c:5205 msgid "bad coprocessor id" msgstr "" -#: config/tc-m68k.c:5179 +#: config/tc-m68k.c:5211 msgid "unrecognized fopt option" msgstr "" -#: config/tc-m68k.c:5313 +#: config/tc-m68k.c:5345 #, c-format msgid "option `%s' may not be negated" msgstr "" -#: config/tc-m68k.c:5324 +#: config/tc-m68k.c:5356 #, c-format msgid "option `%s' not recognized" msgstr "" -#: config/tc-m68k.c:5357 +#: config/tc-m68k.c:5389 msgid "bad format of OPT NEST=depth" msgstr "" -#: config/tc-m68k.c:5420 +#: config/tc-m68k.c:5452 msgid "missing label" msgstr "" -#: config/tc-m68k.c:5444 config/tc-m68k.c:5473 +#: config/tc-m68k.c:5476 config/tc-m68k.c:5505 msgid "bad register list" msgstr "" -#: config/tc-m68k.c:5446 +#: config/tc-m68k.c:5478 #, c-format msgid "bad register list: %s" msgstr "" -#: config/tc-m68k.c:5544 +#: config/tc-m68k.c:5576 msgid "restore without save" msgstr "" -#: config/tc-m68k.c:5721 config/tc-m68k.c:6070 +#: config/tc-m68k.c:5753 config/tc-m68k.c:6102 msgid "syntax error in structured control directive" msgstr "" -#: config/tc-m68k.c:5772 +#: config/tc-m68k.c:5804 msgid "missing condition code in structured control directive" msgstr "" -#: config/tc-m68k.c:6104 +#: config/tc-m68k.c:6136 msgid "missing then" msgstr "" -#: config/tc-m68k.c:6186 +#: config/tc-m68k.c:6218 msgid "else without matching if" msgstr "" -#: config/tc-m68k.c:6220 +#: config/tc-m68k.c:6252 msgid "endi without matching if" msgstr "" -#: config/tc-m68k.c:6261 +#: config/tc-m68k.c:6293 msgid "break outside of structured loop" msgstr "" -#: config/tc-m68k.c:6300 +#: config/tc-m68k.c:6332 msgid "next outside of structured loop" msgstr "" -#: config/tc-m68k.c:6352 +#: config/tc-m68k.c:6384 msgid "missing =" msgstr "" -#: config/tc-m68k.c:6390 +#: config/tc-m68k.c:6422 msgid "missing to or downto" msgstr "" -#: config/tc-m68k.c:6426 config/tc-m68k.c:6460 config/tc-m68k.c:6670 +#: config/tc-m68k.c:6458 config/tc-m68k.c:6492 config/tc-m68k.c:6702 msgid "missing do" msgstr "" -#: config/tc-m68k.c:6563 +#: config/tc-m68k.c:6595 msgid "endf without for" msgstr "" -#: config/tc-m68k.c:6619 +#: config/tc-m68k.c:6651 msgid "until without repeat" msgstr "" -#: config/tc-m68k.c:6706 +#: config/tc-m68k.c:6738 msgid "endw without while" msgstr "" -#: config/tc-m68k.c:6822 +#: config/tc-m68k.c:6862 #, c-format msgid "unrecognized option `%s'" msgstr "" -#: config/tc-m68k.c:6867 +#: config/tc-m68k.c:6907 #, c-format msgid "unrecognized architecture specification `%s'" msgstr "" -#: config/tc-m68k.c:6937 +#: config/tc-m68k.c:6977 msgid "" "680X0 options:\n" "-l\t\t\tuse 1 word for refs to undefined symbols [default 2]\n" @@ -4739,19 +4751,20 @@ msgid "" "\t\t\t[default yes for 68020, 68030, and cpu32]\n" msgstr "" -#: config/tc-m68k.c:6947 +#: config/tc-m68k.c:6987 msgid "" "-m68851 | -mno-68851\n" "\t\t\ttarget has/lacks memory-management unit coprocessor\n" "\t\t\t[default yes for 68020 and up]\n" "-pic, -k\t\tgenerate position independent code\n" "-S\t\t\tturn jbsr into jsr\n" +"--pcrel never turn PC-relative branches into absolute jumps\n" "--register-prefix-optional\n" "\t\t\trecognize register names without prefix character\n" "--bitwise-or\t\tdo not treat `|' as a comment character\n" msgstr "" -#: config/tc-m68k.c:6956 +#: config/tc-m68k.c:6997 msgid "" "--base-size-default-16\tbase reg without size is 16 bits\n" "--base-size-default-32\tbase reg without size is 32 bits (default)\n" @@ -4759,12 +4772,12 @@ msgid "" "--disp-size-default-32\tdisplacement with unknown size is 32 bits (default)\n" msgstr "" -#: config/tc-m68k.c:6991 +#: config/tc-m68k.c:7032 #, c-format msgid "Error %s in %s\n" msgstr "" -#: config/tc-m68k.c:6995 +#: config/tc-m68k.c:7036 #, c-format msgid "Opcode(%d.%s): " msgstr "" @@ -4825,7 +4838,7 @@ msgstr "" msgid "Relaxation should never occur" msgstr "" -#: config/tc-m88k.c:1267 config/tc-sparc.c:3463 read.c:1959 +#: config/tc-m88k.c:1267 config/tc-sparc.c:3470 read.c:1970 #, c-format msgid "BSS length (%d.) <0! Ignored." msgstr "" @@ -5428,10 +5441,10 @@ msgstr "" msgid "Invalid PC relative reloc" msgstr "" -#: config/tc-mips.c:9766 config/tc-sparc.c:3025 config/tc-sparc.c:3032 -#: config/tc-sparc.c:3039 config/tc-sparc.c:3046 config/tc-sparc.c:3053 -#: config/tc-sparc.c:3062 config/tc-sparc.c:3073 config/tc-sparc.c:3099 -#: config/tc-sparc.c:3127 write.c:974 write.c:1038 +#: config/tc-mips.c:9766 config/tc-sparc.c:3032 config/tc-sparc.c:3039 +#: config/tc-sparc.c:3046 config/tc-sparc.c:3053 config/tc-sparc.c:3060 +#: config/tc-sparc.c:3069 config/tc-sparc.c:3080 config/tc-sparc.c:3106 +#: config/tc-sparc.c:3134 write.c:971 write.c:1035 msgid "relocation overflow" msgstr "" @@ -5608,169 +5621,170 @@ msgstr "" msgid "Invalid register specification." msgstr "" -#: config/tc-ns32k.c:444 +#: config/tc-ns32k.c:447 msgid "Invalid syntax in PC-relative addressing mode" msgstr "" -#: config/tc-ns32k.c:468 +#: config/tc-ns32k.c:471 msgid "Invalid syntax in External addressing mode" msgstr "" -#: config/tc-ns32k.c:537 +#: config/tc-ns32k.c:551 msgid "Invalid syntax in Memory Relative addressing mode" msgstr "" -#: config/tc-ns32k.c:604 +#: config/tc-ns32k.c:618 msgid "Invalid scaled-indexed mode, use (b,w,d,q)" msgstr "" -#: config/tc-ns32k.c:609 +#: config/tc-ns32k.c:623 msgid "Syntax in scaled-indexed mode, use [Rn:m] where n=[0..7] m={b,w,d,q}" msgstr "" -#: config/tc-ns32k.c:615 +#: config/tc-ns32k.c:628 msgid "Scaled-indexed addressing mode combined with scaled-index" msgstr "" -#: config/tc-ns32k.c:624 +#: config/tc-ns32k.c:639 msgid "Invalid or illegal addressing mode combined with scaled-index" msgstr "" -#: config/tc-ns32k.c:731 +#: config/tc-ns32k.c:751 msgid "Premature end of suffix -- Defaulting to d" msgstr "" -#: config/tc-ns32k.c:744 +#: config/tc-ns32k.c:764 msgid "Bad suffix after ':' use {b|w|d} Defaulting to d" msgstr "" -#: config/tc-ns32k.c:785 +#: config/tc-ns32k.c:810 msgid "Very short instr to option, ie you can't do it on a NULLstr" msgstr "" -#: config/tc-ns32k.c:829 +#: config/tc-ns32k.c:861 msgid "No such entry in list. (cpu/mmu register)" msgstr "" -#: config/tc-ns32k.c:870 +#: config/tc-ns32k.c:902 msgid "Internal consistency error. check ns32k-opcode.h" msgstr "" -#: config/tc-ns32k.c:891 +#: config/tc-ns32k.c:926 msgid "Address of immediate operand" msgstr "" -#: config/tc-ns32k.c:892 +#: config/tc-ns32k.c:927 msgid "Invalid immediate write operand." msgstr "" -#: config/tc-ns32k.c:1019 +#: config/tc-ns32k.c:1057 msgid "Bad opcode-table-option, check in file ns32k-opcode.h" msgstr "" -#: config/tc-ns32k.c:1048 +#: config/tc-ns32k.c:1090 msgid "No such opcode" msgstr "" -#: config/tc-ns32k.c:1116 +#: config/tc-ns32k.c:1167 msgid "Bad suffix, defaulting to d" msgstr "" -#: config/tc-ns32k.c:1138 +#: config/tc-ns32k.c:1195 msgid "Too many operands passed to instruction" msgstr "" -#. check error in default -#: config/tc-ns32k.c:1149 +#. Check error in default. +#: config/tc-ns32k.c:1208 msgid "Wrong numbers of operands in default, check ns32k-opcodes.h" msgstr "" -#: config/tc-ns32k.c:1154 +#: config/tc-ns32k.c:1212 msgid "Wrong number of operands" msgstr "" -#: config/tc-ns32k.c:1273 +#: config/tc-ns32k.c:1333 msgid "iif convert internal pcrel/binary" msgstr "" -#: config/tc-ns32k.c:1289 +#: config/tc-ns32k.c:1350 msgid "Bignum too big for long" msgstr "" -#: config/tc-ns32k.c:1364 +#: config/tc-ns32k.c:1428 msgid "iif convert internal pcrel/pointer" msgstr "" -#: config/tc-ns32k.c:1369 +#: config/tc-ns32k.c:1433 msgid "Internal logic error in iif.iifP[n].type" msgstr "" -#. We cant relax this case -#: config/tc-ns32k.c:1403 +#. We cant relax this case. +#: config/tc-ns32k.c:1471 msgid "Can't relax difference" msgstr "" -#: config/tc-ns32k.c:1452 +#: config/tc-ns32k.c:1519 msgid "Displacement to large for :d" msgstr "" -#: config/tc-ns32k.c:1463 +#: config/tc-ns32k.c:1532 msgid "Internal logic error in iif.iifP[].type" msgstr "" -#: config/tc-ns32k.c:1518 +#: config/tc-ns32k.c:1592 #, c-format msgid "Can not do %d byte pc-relative relocation for storage type %d" msgstr "" -#: config/tc-ns32k.c:1521 +#: config/tc-ns32k.c:1595 #, c-format msgid "Can not do %d byte relocation for storage type %d" msgstr "" -#: config/tc-ns32k.c:1553 +#. Fatal. +#: config/tc-ns32k.c:1627 #, c-format msgid "Can't hash %s: %s" msgstr "" -#: config/tc-ns32k.c:1638 +#: config/tc-ns32k.c:1715 msgid "Byte displacement out of range. line number not valid" msgstr "" -#: config/tc-ns32k.c:1647 +#: config/tc-ns32k.c:1724 msgid "Word displacement out of range. line number not valid" msgstr "" -#: config/tc-ns32k.c:1661 +#: config/tc-ns32k.c:1738 msgid "Double word displacement out of range" msgstr "" -#: config/tc-ns32k.c:1681 +#: config/tc-ns32k.c:1758 #, c-format msgid "Internal logic error. line %s, file \"%s\"" msgstr "" -#: config/tc-ns32k.c:1729 +#: config/tc-ns32k.c:1806 #, c-format msgid "Internal logic error. line %s, file \"%s\"" msgstr "" -#: config/tc-ns32k.c:1840 +#: config/tc-ns32k.c:1910 msgid "Bit field out of range" msgstr "" -#: config/tc-ns32k.c:2089 +#: config/tc-ns32k.c:2177 #, c-format msgid "invalid architecture option -m%s" msgstr "" -#: config/tc-ns32k.c:2105 +#: config/tc-ns32k.c:2193 msgid "" "NS32K options:\n" "-m32032 | -m32532\tselect variant of NS32K architecture\n" msgstr "" -#: config/tc-ns32k.c:2285 +#: config/tc-ns32k.c:2371 #, c-format msgid "Cannot find relocation type for symbol %s, code %d" msgstr "" @@ -5937,7 +5951,7 @@ msgstr "" msgid "The XCOFF file format does not support arbitrary sections" msgstr "" -#: config/tc-ppc.c:2772 config/tc-ppc.c:3297 read.c:2989 +#: config/tc-ppc.c:2772 config/tc-ppc.c:3297 read.c:3000 msgid "missing value" msgstr "" @@ -6198,8 +6212,8 @@ msgstr "" msgid "overflow in branch to %s; converted into longer instruction sequence" msgstr "" -#: config/tc-sh.c:2421 config/tc-sh.c:2449 config/tc-sparc.c:4002 -#: config/tc-sparc.c:4021 +#: config/tc-sh.c:2421 config/tc-sh.c:2449 config/tc-sparc.c:4014 +#: config/tc-sparc.c:4033 msgid "misaligned data" msgstr "" @@ -6207,44 +6221,44 @@ msgstr "" msgid "misaligned offset" msgstr "" -#: config/tc-sparc.c:271 +#: config/tc-sparc.c:275 msgid "Invalid default architecture, broken assembler." msgstr "" -#: config/tc-sparc.c:275 config/tc-sparc.c:472 +#: config/tc-sparc.c:279 config/tc-sparc.c:475 msgid "Bad opcode table, broken assembler." msgstr "" -#: config/tc-sparc.c:451 +#: config/tc-sparc.c:455 #, c-format msgid "invalid architecture -xarch=%s" msgstr "" -#: config/tc-sparc.c:466 +#: config/tc-sparc.c:469 #, c-format msgid "invalid architecture -A%s" msgstr "" -#: config/tc-sparc.c:533 +#: config/tc-sparc.c:536 #, c-format msgid "No compiled in support for %d bit object file format" msgstr "" -#: config/tc-sparc.c:570 +#: config/tc-sparc.c:573 msgid "Unrecognized option following -K" msgstr "" -#: config/tc-sparc.c:610 +#: config/tc-sparc.c:613 msgid "SPARC options:\n" msgstr "" -#: config/tc-sparc.c:618 +#: config/tc-sparc.c:621 msgid "" "\n" "-xarch=v8plus | -xarch=v8plusa\n" msgstr "" -#: config/tc-sparc.c:619 +#: config/tc-sparc.c:622 msgid "" "\t\t\tspecify variant of SPARC architecture\n" "-bump\t\t\twarn when assembler switches architectures\n" @@ -6254,34 +6268,34 @@ msgid "" "-no-relax\t\tavoid changing any jumps and branches\n" msgstr "" -#: config/tc-sparc.c:627 +#: config/tc-sparc.c:630 msgid "-k\t\t\tgenerate PIC\n" msgstr "" -#: config/tc-sparc.c:631 +#: config/tc-sparc.c:634 msgid "" "-32\t\t\tcreate 32 bit object file\n" "-64\t\t\tcreate 64 bit object file\n" msgstr "" -#: config/tc-sparc.c:634 +#: config/tc-sparc.c:637 #, c-format msgid "\t\t\t[default is %d]\n" msgstr "" -#: config/tc-sparc.c:636 +#: config/tc-sparc.c:639 msgid "" "-TSO\t\t\tuse Total Store Ordering\n" "-PSO\t\t\tuse Partial Store Ordering\n" "-RMO\t\t\tuse Relaxed Memory Ordering\n" msgstr "" -#: config/tc-sparc.c:640 +#: config/tc-sparc.c:643 #, c-format msgid "\t\t\t[default is %s]\n" msgstr "" -#: config/tc-sparc.c:642 +#: config/tc-sparc.c:645 msgid "" "-KPIC\t\t\tgenerate PIC\n" "-V\t\t\tprint assembler version number\n" @@ -6294,7 +6308,7 @@ msgid "" "-s\t\t\tignored\n" msgstr "" -#: config/tc-sparc.c:654 +#: config/tc-sparc.c:657 msgid "" "-EL\t\t\tgenerate code for a little endian machine\n" "-EB\t\t\tgenerate code for a big endian machine\n" @@ -6302,218 +6316,218 @@ msgid "" " instructions and little endian data.\n" msgstr "" -#: config/tc-sparc.c:771 +#: config/tc-sparc.c:775 #, c-format msgid "Internal error: losing opcode: `%s' \"%s\"\n" msgstr "" -#: config/tc-sparc.c:789 +#: config/tc-sparc.c:793 #, c-format msgid "Internal error: can't find opcode `%s' for `%s'\n" msgstr "" -#: config/tc-sparc.c:938 +#: config/tc-sparc.c:942 msgid "Support for 64-bit arithmetic not compiled in." msgstr "" -#: config/tc-sparc.c:984 +#: config/tc-sparc.c:989 msgid "set: number not in 0..4294967295 range" msgstr "" -#: config/tc-sparc.c:991 +#: config/tc-sparc.c:996 msgid "set: number not in -2147483648..4294967295 range" msgstr "" -#: config/tc-sparc.c:1051 +#: config/tc-sparc.c:1057 msgid "setsw: number not in -2147483648..4294967295 range" msgstr "" -#: config/tc-sparc.c:1099 +#: config/tc-sparc.c:1106 msgid "setx: temporary register same as destination register" msgstr "" -#: config/tc-sparc.c:1169 +#: config/tc-sparc.c:1176 msgid "setx: illegal temporary register g0" msgstr "" -#: config/tc-sparc.c:1266 +#: config/tc-sparc.c:1273 msgid "FP branch in delay slot" msgstr "" -#: config/tc-sparc.c:1282 +#: config/tc-sparc.c:1289 msgid "FP branch preceded by FP instruction; NOP inserted" msgstr "" -#: config/tc-sparc.c:1322 +#: config/tc-sparc.c:1329 msgid "failed special case insn sanity check" msgstr "" -#: config/tc-sparc.c:1413 +#: config/tc-sparc.c:1417 msgid ": invalid membar mask name" msgstr "" -#: config/tc-sparc.c:1427 +#: config/tc-sparc.c:1431 msgid ": invalid membar mask expression" msgstr "" -#: config/tc-sparc.c:1432 +#: config/tc-sparc.c:1436 msgid ": invalid membar mask number" msgstr "" -#: config/tc-sparc.c:1450 +#: config/tc-sparc.c:1454 msgid ": invalid prefetch function name" msgstr "" -#: config/tc-sparc.c:1458 +#: config/tc-sparc.c:1462 msgid ": invalid prefetch function expression" msgstr "" -#: config/tc-sparc.c:1463 +#: config/tc-sparc.c:1467 msgid ": invalid prefetch function number" msgstr "" -#: config/tc-sparc.c:1491 config/tc-sparc.c:1503 +#: config/tc-sparc.c:1495 config/tc-sparc.c:1507 msgid ": unrecognizable privileged register" msgstr "" -#: config/tc-sparc.c:1527 config/tc-sparc.c:1544 +#: config/tc-sparc.c:1531 config/tc-sparc.c:1548 msgid ": unrecognizable v9a ancillary state register" msgstr "" -#: config/tc-sparc.c:1532 +#: config/tc-sparc.c:1536 msgid ": rd on write only ancillary state register" msgstr "" -#: config/tc-sparc.c:1568 +#: config/tc-sparc.c:1572 msgid ": asr number must be between 16 and 31" msgstr "" -#: config/tc-sparc.c:1576 +#: config/tc-sparc.c:1580 msgid ": asr number must be between 0 and 31" msgstr "" -#: config/tc-sparc.c:1586 +#: config/tc-sparc.c:1590 msgid ": expecting %asrN" msgstr "" -#: config/tc-sparc.c:1914 +#: config/tc-sparc.c:1918 msgid "detected global register use not covered by .register pseudo-op" msgstr "" -#: config/tc-sparc.c:1985 +#: config/tc-sparc.c:1989 msgid ": There are only 64 f registers; [0-63]" msgstr "" -#: config/tc-sparc.c:1987 config/tc-sparc.c:1999 +#: config/tc-sparc.c:1991 config/tc-sparc.c:2003 msgid ": There are only 32 f registers; [0-31]" msgstr "" -#: config/tc-sparc.c:2118 config/tc-sparc.c:2154 +#: config/tc-sparc.c:2121 config/tc-sparc.c:2157 msgid "Illegal operands: %%%s requires arguments in ()" msgstr "" -#: config/tc-sparc.c:2166 +#: config/tc-sparc.c:2169 msgid "" "Illegal operands: Can't do arithmetics other than + and - involving %%%s()" msgstr "" -#: config/tc-sparc.c:2275 +#: config/tc-sparc.c:2279 msgid "Illegal operands: Can't add non-constant expression to %%%s()" msgstr "" -#: config/tc-sparc.c:2285 +#: config/tc-sparc.c:2289 msgid "" "Illegal operands: Can't do arithmetics involving %%%s() of a relocatable " "symbol" msgstr "" -#: config/tc-sparc.c:2303 +#: config/tc-sparc.c:2307 msgid ": PC-relative operand can't be a constant" msgstr "" -#: config/tc-sparc.c:2336 +#: config/tc-sparc.c:2340 msgid ": invalid ASI name" msgstr "" -#: config/tc-sparc.c:2344 +#: config/tc-sparc.c:2348 msgid ": invalid ASI expression" msgstr "" -#: config/tc-sparc.c:2349 +#: config/tc-sparc.c:2353 msgid ": invalid ASI number" msgstr "" -#: config/tc-sparc.c:2446 +#: config/tc-sparc.c:2450 msgid "OPF immediate operand out of range (0-0x1ff)" msgstr "" -#: config/tc-sparc.c:2451 +#: config/tc-sparc.c:2455 msgid "non-immediate OPF operand, ignored" msgstr "" -#: config/tc-sparc.c:2470 +#: config/tc-sparc.c:2474 msgid ": invalid cpreg name" msgstr "" -#: config/tc-sparc.c:2499 +#: config/tc-sparc.c:2503 #, c-format msgid "Illegal operands%s" msgstr "" -#: config/tc-sparc.c:2528 +#: config/tc-sparc.c:2535 #, c-format msgid "architecture bumped from \"%s\" to \"%s\" on \"%s\"" msgstr "" -#: config/tc-sparc.c:2564 +#: config/tc-sparc.c:2571 #, c-format msgid "Architecture mismatch on \"%s\"." msgstr "" -#: config/tc-sparc.c:2565 +#: config/tc-sparc.c:2572 #, c-format msgid " (Requires %s; requested architecture is %s.)" msgstr "" -#: config/tc-sparc.c:3173 +#: config/tc-sparc.c:3180 #, c-format msgid "bad or unhandled relocation type: 0x%02x" msgstr "" -#: config/tc-sparc.c:3475 +#: config/tc-sparc.c:3482 msgid "bad .reserve segment -- expected BSS segment" msgstr "" -#: config/tc-sparc.c:3492 +#: config/tc-sparc.c:3499 msgid "missing alignment" msgstr "" -#: config/tc-sparc.c:3503 config/tc-sparc.c:3648 +#: config/tc-sparc.c:3510 config/tc-sparc.c:3660 #, c-format msgid "alignment too large; assuming %d" msgstr "" -#: config/tc-sparc.c:3509 config/tc-sparc.c:3654 +#: config/tc-sparc.c:3516 config/tc-sparc.c:3666 msgid "negative alignment" msgstr "" -#: config/tc-sparc.c:3519 config/tc-sparc.c:3677 +#: config/tc-sparc.c:3526 config/tc-sparc.c:3689 msgid "alignment not a power of 2" msgstr "" -#: config/tc-sparc.c:3634 +#: config/tc-sparc.c:3646 msgid "Expected comma after common length" msgstr "" -#: config/tc-sparc.c:3869 config/tc-sparc.c:3879 +#: config/tc-sparc.c:3881 config/tc-sparc.c:3891 msgid "register syntax is .register %%g[2367],{#scratch|symbolname|#ignore}" msgstr "" -#: config/tc-sparc.c:3897 +#: config/tc-sparc.c:3909 msgid "redefinition of global register" msgstr "" -#: config/tc-sparc.c:3908 +#: config/tc-sparc.c:3920 #, c-format msgid "Register symbol %s already defined." msgstr "" @@ -7635,59 +7649,59 @@ msgstr "" msgid "register r%d, out of range." msgstr "" -#: config/tc-z8k.c:374 +#: config/tc-z8k.c:368 #, c-format msgid "expected %c" msgstr "" -#: config/tc-z8k.c:390 +#: config/tc-z8k.c:385 #, c-format msgid "register is wrong size for a word %s" msgstr "" -#: config/tc-z8k.c:405 +#: config/tc-z8k.c:401 #, c-format msgid "register is wrong size for address %s" msgstr "" -#: config/tc-z8k.c:680 +#: config/tc-z8k.c:674 msgid "Missing ) in ra(rb)" msgstr "" -#: config/tc-z8k.c:947 +#: config/tc-z8k.c:941 #, c-format msgid "operand %s0x%x out of range." msgstr "" -#: config/tc-z8k.c:1086 +#: config/tc-z8k.c:1078 msgid "immediate must be 1 or 2" msgstr "" -#: config/tc-z8k.c:1091 +#: config/tc-z8k.c:1081 msgid "immediate 1 or 2 expected" msgstr "" -#: config/tc-z8k.c:1119 +#: config/tc-z8k.c:1107 msgid "can't use R0 here" msgstr "" -#: config/tc-z8k.c:1277 +#: config/tc-z8k.c:1254 msgid "Can't find opcode to match operands" msgstr "" -#: config/tc-z8k.c:1389 +#: config/tc-z8k.c:1369 #, c-format msgid "invalid architecture -z%s" msgstr "" -#: config/tc-z8k.c:1405 +#: config/tc-z8k.c:1385 msgid "" "Z8K options:\n" "-z8001\t\t\tgenerate segmented code\n" "-z8002\t\t\tgenerate unsegmented code\n" msgstr "" -#: config/tc-z8k.c:1542 +#: config/tc-z8k.c:1529 #, c-format msgid "Can't subtract symbols in different sections %s %s" msgstr "" @@ -7950,7 +7964,7 @@ msgstr "" msgid "Missing '%c' assumed" msgstr "" -#: expr.c:1037 read.c:3865 +#: expr.c:1037 read.c:3876 msgid "EBCDIC constants are not supported" msgstr "" @@ -8514,301 +8528,301 @@ msgstr "" msgid "error constructing %s pseudo-op table: %s" msgstr "" -#: read.c:801 +#: read.c:805 #, c-format msgid "Unknown pseudo-op: `%s'" msgstr "" -#: read.c:933 +#: read.c:937 #, c-format msgid "label \"%d$\" redefined" msgstr "" -#: read.c:1144 +#: read.c:1155 msgid ".abort detected. Abandoning ship." msgstr "" -#: read.c:1235 read.c:2024 +#: read.c:1246 read.c:2035 msgid "Alignment not a power of 2" msgstr "" -#: read.c:1244 +#: read.c:1255 #, c-format msgid "Alignment too large: %u assumed" msgstr "" -#: read.c:1276 +#: read.c:1287 msgid "expected fill pattern missing" msgstr "" -#: read.c:1480 +#: read.c:1491 #, c-format msgid "attempt to re-define symbol `%s'" msgstr "" #. Some of the back ends can't deal with non-positive line numbers. #. Besides, it's silly. -#: read.c:1604 +#: read.c:1615 #, c-format msgid "Line numbers must be positive; line number %d rejected." msgstr "" -#: read.c:1632 +#: read.c:1643 msgid "start address not supported" msgstr "" -#: read.c:1642 +#: read.c:1653 msgid ".err encountered" msgstr "" -#: read.c:1661 read.c:1663 +#: read.c:1672 read.c:1674 #, c-format msgid ".fail %ld encountered" msgstr "" -#: read.c:1700 +#: read.c:1711 #, c-format msgid ".fill size clamped to %d." msgstr "" -#: read.c:1705 +#: read.c:1716 msgid "Size negative: .fill ignored." msgstr "" -#: read.c:1711 +#: read.c:1722 msgid "Repeat < 0, .fill ignored" msgstr "" -#: read.c:1871 +#: read.c:1882 #, c-format msgid "unrecognized .linkonce type `%s'" msgstr "" -#: read.c:1884 read.c:1910 +#: read.c:1895 read.c:1921 msgid ".linkonce is not supported for this object file format" msgstr "" -#: read.c:1906 +#: read.c:1917 #, c-format msgid "bfd_set_section_flags: %s" msgstr "" -#: read.c:1975 +#: read.c:1986 #, c-format msgid "error setting flags for \".sbss\": %s" msgstr "" -#: read.c:1998 +#: read.c:2009 msgid "Expected comma after size" msgstr "" -#: read.c:2008 +#: read.c:2019 msgid "Missing alignment" msgstr "" -#: read.c:2159 +#: read.c:2170 msgid "bad expression" msgstr "" -#: read.c:2296 +#: read.c:2307 #, c-format msgid "attempt to redefine pseudo-op `%s' ignored" msgstr "" -#: read.c:2362 +#: read.c:2373 #, c-format msgid "invalid segment \"%s\"; segment \"%s\" assumed" msgstr "" -#: read.c:2368 +#: read.c:2379 msgid "ignoring fill value in absolute section" msgstr "" -#: read.c:2371 +#: read.c:2382 msgid "only constant offsets supported in absolute section" msgstr "" -#: read.c:2403 +#: read.c:2414 msgid "MRI style ORG pseudo-op not supported" msgstr "" -#: read.c:2492 +#: read.c:2503 msgid "unrecognized section type" msgstr "" -#: read.c:2560 +#: read.c:2571 #, c-format msgid "unrecognized section type `%s'" msgstr "" -#: read.c:2574 +#: read.c:2585 msgid "absolute sections are not supported" msgstr "" -#: read.c:2589 +#: read.c:2600 #, c-format msgid "unrecognized section command `%s'" msgstr "" -#: read.c:2677 +#: read.c:2688 #, c-format msgid "%s without %s" msgstr "" -#: read.c:2878 +#: read.c:2889 msgid "Unsupported variable size or fill value" msgstr "" -#: read.c:2903 +#: read.c:2914 msgid ".space repeat count is zero, ignored" msgstr "" -#: read.c:2905 +#: read.c:2916 msgid ".space repeat count is negative, ignored" msgstr "" -#: read.c:2934 +#: read.c:2945 msgid "space allocation too complex in absolute section" msgstr "" -#: read.c:2940 +#: read.c:2951 msgid "space allocation too complex in common section" msgstr "" -#: read.c:3028 read.c:4110 +#: read.c:3039 read.c:4121 #, c-format msgid "Bad floating literal: %s" msgstr "" -#: read.c:3101 +#: read.c:3112 #, c-format msgid "Rest of line ignored. First ignored character is `%c'." msgstr "" -#: read.c:3104 +#: read.c:3115 #, c-format msgid "Rest of line ignored. First ignored character valued 0x%x." msgstr "" -#: read.c:3155 +#: read.c:3166 msgid "illegal expression; zero assumed" msgstr "" -#: read.c:3157 +#: read.c:3168 msgid "missing expression; zero assumed" msgstr "" -#: read.c:3328 +#: read.c:3339 msgid "rva without symbol" msgstr "" -#: read.c:3452 +#: read.c:3463 msgid "attempt to store value in absolute section" msgstr "" -#: read.c:3490 read.c:4387 +#: read.c:3501 read.c:4398 msgid "zero assumed for missing expression" msgstr "" -#: read.c:3502 read.c:4399 +#: read.c:3513 read.c:4410 msgid "register value used as expression" msgstr "" #. Leading bits contain both 0s & 1s. -#: read.c:3592 +#: read.c:3603 #, c-format msgid "Value 0x%lx truncated to 0x%lx." msgstr "" -#: read.c:3608 +#: read.c:3619 #, c-format msgid "Bignum truncated to %d bytes" msgstr "" -#: read.c:3685 +#: read.c:3696 #, c-format msgid "unsupported BFD relocation size %u" msgstr "" -#: read.c:3775 +#: read.c:3786 msgid "using a bit field width of zero" msgstr "" -#: read.c:3783 +#: read.c:3794 #, c-format msgid "field width \"%s\" too complex for a bitfield" msgstr "" -#: read.c:3791 +#: read.c:3802 #, c-format msgid "field width %lu too big to fit in %d bytes: truncated to %d bits" msgstr "" -#: read.c:3812 +#: read.c:3823 #, c-format msgid "field value \"%s\" too complex for a bitfield" msgstr "" -#: read.c:3938 +#: read.c:3949 msgid "Unresolvable or nonpositive repeat count; using 1" msgstr "" -#: read.c:3989 +#: read.c:4000 #, c-format msgid "Unknown floating type type '%c'" msgstr "" -#: read.c:4011 +#: read.c:4022 msgid "Floating point constant too large" msgstr "" -#: read.c:4132 +#: read.c:4143 msgid "unresolvable or nonpositive repeat count; using 1" msgstr "" -#: read.c:4530 +#: read.c:4541 msgid "Expected " msgstr "" #. To be compatible with BSD 4.2 as: give the luser a linefeed!! -#: read.c:4563 read.c:4649 +#: read.c:4574 read.c:4660 msgid "Unterminated string: Newline inserted." msgstr "" -#: read.c:4657 +#: read.c:4668 msgid "Bad escaped character in string, '?' assumed" msgstr "" -#: read.c:4683 +#: read.c:4694 msgid "expected address expression; zero assumed" msgstr "" -#: read.c:4703 +#: read.c:4714 #, c-format msgid "symbol \"%s\" undefined; zero assumed" msgstr "" -#: read.c:4706 +#: read.c:4717 msgid "some symbol undefined; zero assumed" msgstr "" -#: read.c:4724 +#: read.c:4735 msgid "bad or irreducible absolute expression; zero assumed" msgstr "" -#: read.c:4759 +#: read.c:4770 msgid "This string may not contain '\\0'" msgstr "" -#: read.c:4796 +#: read.c:4807 msgid "Missing string" msgstr "" -#: read.c:5027 +#: read.c:5038 msgid "missing .func" msgstr "" -#: read.c:5044 +#: read.c:5055 msgid ".endfunc missing for previous .func" msgstr "" @@ -8874,7 +8888,7 @@ msgstr "" msgid "division by zero when setting %s" msgstr "" -#: symbols.c:1183 write.c:1909 +#: symbols.c:1183 write.c:1913 #, c-format msgid "can't resolve value for symbol \"%s\"" msgstr "" @@ -8889,81 +8903,81 @@ msgstr "" msgid "Attempt to get value of unresolved symbol %s" msgstr "" -#: write.c:172 +#: write.c:169 #, c-format msgid "field fx_size too small to hold %d" msgstr "" -#: write.c:309 +#: write.c:306 msgid "rva not supported" msgstr "" -#: write.c:505 +#: write.c:500 #, c-format msgid "attempt to .org/.space backwards? (%ld)" msgstr "" -#: write.c:977 +#: write.c:974 msgid "relocation out of range" msgstr "" -#: write.c:980 +#: write.c:977 #, c-format msgid "%s:%u: bad return from bfd_install_relocation: %x" msgstr "" -#: write.c:1025 +#: write.c:1022 msgid "internal error: fixup not contained within frag" msgstr "" -#: write.c:1041 +#: write.c:1038 #, c-format msgid "%s:%u: bad return from bfd_install_relocation" msgstr "" -#: write.c:1128 write.c:1152 +#: write.c:1125 write.c:1149 #, c-format msgid "FATAL: Can't write %s" msgstr "" -#: write.c:1183 +#: write.c:1181 msgid "Cannot write to output file." msgstr "" -#: write.c:1429 +#: write.c:1419 #, c-format msgid "%d error%s, %d warning%s, generating bad object file.\n" msgstr "" -#: write.c:1436 +#: write.c:1426 #, c-format msgid "%d error%s, %d warning%s, no object file generated.\n" msgstr "" -#: write.c:1846 +#: write.c:1850 #, c-format msgid "local label %s is not defined" msgstr "" -#: write.c:2151 +#: write.c:2154 #, c-format msgid "alignment padding (%lu bytes) not a multiple of %ld" msgstr "" -#: write.c:2257 +#: write.c:2260 #, c-format msgid ".word %s-%s+%s didn't fit" msgstr "" -#: write.c:2337 +#: write.c:2340 msgid "attempt to .org backwards ignored" msgstr "" -#: write.c:2360 +#: write.c:2364 msgid ".space specifies non-absolute value" msgstr "" -#: write.c:2364 +#: write.c:2368 msgid ".space or .fill with negative value, ignored" msgstr "" @@ -8974,7 +8988,7 @@ msgid "" "\"%s\" {%s section} at file address %s." msgstr "" -#: write.c:2780 +#: write.c:2778 #, c-format msgid "Value of %s too large for field of %d bytes at %s" msgstr "" -- cgit v1.1