aboutsummaryrefslogtreecommitdiff
path: root/sim
AgeCommit message (Collapse)AuthorFilesLines
2017-12-12sim: or1k: add cgen generated filesStafford Horne11-0/+27536
These are the simulator files generated by cgen. These are split out from the main sim patch to make the patch easier to review and smaller. sim/ChangeLog: 2017-12-12 Stafford Horne <shorne@gmail.com> Peter Gavin <pgavin@gmail.com> * or1k/arch.c: Generated. * or1k/arch.h: Generated. * or1k/cpu.c: Generated. * or1k/cpu.h: Generated. * or1k/cpuall.h: Generated. * or1k/decode.c: Generated. * or1k/decode.h: Generated. * or1k/model.c: Generated. * or1k/sem-switch.c: Generated. * or1k/sem.c: Generated.
2017-12-12sim: or1k: add or1k target to simStafford Horne11-0/+1637
This adds the OpenRISC 32-bit sim target. The OpenRISC sim is a CGEN based sim so the bulk of the code is generated from the .cpu files by CGEN. The engine decode and execute logic in mloop uses scache with pseudo-basic-block extraction and supports both full and fast (switch) modes. The sim does not implement an mmu at the moment. The sim does implement fpu instructions via the common sim-fpu implementation. sim/ChangeLog: 2017-12-12 Stafford Horne <shorne@gmail.com> Peter Gavin <pgavin@gmail.com> * configure.tgt: Add or1k sim. * or1k/README: New file. * or1k/Makefile.in: New file. * or1k/configure.ac: New file. * or1k/mloop.in: New file. * or1k/or1k-sim.h: New file. * or1k/or1k.c: New file. * or1k/sim-if.c: New file. * or1k/sim-main.h: New file. * or1k/traps.c: New file.
2017-12-12sim: cgen: add MUL2OFSI and MUL1OFSI functions (needed for OR1K l.mul[u])Peter Gavin2-0/+25
sim/common/ChangeLog: 2017-12-12 Peter Gavin <pgavin@gmail.com> Stafford Horne <shorne@gmail.com> * cgen-ops.h (MUL2OFSI): New function, 2's complement overflow flag. (MUL1OFSI): New function, 1's complement overflow flag.
2017-12-12sim: cgen: add remainder functions (needed for OR1K lf.rem.[sd])Peter Gavin5-5/+149
* sim/common/ChangeLog: 2017-12-12 Peter Gavin <pgavin@gmail.com> Stafford Horne <shorne@gmail.com> * cgen-accfp.c (remsf, remdf): New function. (cgen_init_accurate_fpu): Add remsf and remdf. * cgen-fpu.h (cgen_fp_ops): Add remsf, remdf, remxf and remtf. * sim-fpu.c (sim_fpu_rem): New function. * sim-fpu.h (sim_fpu_status_invalid_irx): New enum. (sim_fpu_rem): New function. (sim_fpu_print_status): Add case for sim_fpu_status_invalid_irx.
2017-11-01FT32: support for FT32B processor - part 2/2James Bowman2-7/+19
FT32B is a new FT32 family member. This patch adds support for the compressed instructions to gdb and sim. gdb/ChangeLog: * ft32-tdep.c (ft32_fetch_instruction): New function. (ft32_analyze_prologue): Use ft32_fetch_instruction(). sim/ChangeLog: * ft32/interp.c (step_once): Add ft32 shortcode decoder.
2017-10-12FT32: support for FT32B processor - part 1James Bowman2-7/+15
FT32B is a new FT32 family member. It has a code compression scheme, which requires the use of linker relaxations. The change is quite large, so submission is in several parts. Part 1 adds a 15-bit instruction field, and CPU-specific functions for the code compression that are used in binutils and GDB. bfd/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elf32-ft32.c: Add HOWTO R_FT32_15. * reloc.c: Add BFD_RELOC_FT32_15. gas/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * config/tc-ft32.c (md_assemble): Replace FT32_FLD_K8 with K15. (md_apply_fix, tc_gen_reloc): Add BFD_RELOC_FT32_15. include/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * elf/ft32.h: Add R_FT32_15. * opcode/ft32.h: Replace FT32_FLD_K8 with K15. (ft32_shortcode, sc_compar, ft32_split_shortcode, ft32_merge_shortcode, ft32_merge_shortcode): New functions. opcodes/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * opcodes/ft32-dis.c (print_insn_ft32): Replace FT32_FLD_K8 with K15. * opcodes/ft32-opc.c (ft32_opc_info): Replace FT32_FLD_K8 with K15. Add jmpix pattern. sim/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * sim/ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.
2017-10-12Add myself as ft32 maintainer for sim.James Bowman2-0/+5
sim/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * MAINTAINERS (ft32): Add myself.
2017-10-03Update my email address.Jim Wilson2-1/+5
sim/ * MAINTAINERS (aarch64): Update my email address.
2017-09-21[SIM, ARM] Fix build failureYao Qi2-1/+8
This patch fixes the build failure by using disassembler to get disassemble function pointer, and do the disassembly, because print_insn_little_arm is no longer visible outside opcodes/ binutils-gdb/sim/arm/wrapper.c:98:10: error: implicit declaration of function 'print_insn_little_arm' [-Werror=implicit-function-declaration] size = print_insn_little_arm (0, & info); ^ sim/arm: 2017-09-21 Yao Qi <yao.qi@linaro.org> * wrapper.c (print_insn): Use disassembler instead of print_insn_little_arm.
2017-09-06Honor an existing CC_FOR_BUILD in the environment for sim.John Baldwin59-202/+434
This matches the equivalent bits in bfd/acinclude.m4 sim/ChangeLog: * configure.ac: Honor existing CC_FOR_BUILD in environment. * configure: Regenerate. sim/aarch64/ChangeLog: * configure: Regenerate. sim/arm/ChangeLog: * configure: Regenerate. sim/avr/ChangeLog: * configure: Regenerate. sim/bfin/ChangeLog: * configure: Regenerate. sim/common/ChangeLog: * acinclude.m4 (SIM_AC_COMMON) Honor existing CC_FOR_BUILD in environment. sim/cr16/ChangeLog: * configure: Regenerate. sim/cris/ChangeLog: * configure: Regenerate. sim/d10v/ChangeLog: * configure: Regenerate. sim/erc32/ChangeLog: * configure: Regenerate. sim/frv/ChangeLog: * configure: Regenerate. sim/ft32/ChangeLog: * configure: Regenerate. sim/h8300/ChangeLog: * configure: Regenerate. sim/iq2000/ChangeLog: * configure: Regenerate. sim/lm32/ChangeLog: * configure: Regenerate. sim/m32c/ChangeLog: * configure: Regenerate. sim/m32r/ChangeLog: * configure: Regenerate. sim/m68hc11/ChangeLog: * configure: Regenerate. sim/mcore/ChangeLog: * configure: Regenerate. sim/microblaze/ChangeLog: * configure: Regenerate. sim/mips/ChangeLog: * configure: Regenerate. sim/mn10300/ChangeLog: * configure: Regenerate. sim/moxie/ChangeLog: * configure: Regenerate. sim/msp430/ChangeLog: * configure: Regenerate. sim/rl78/ChangeLog: * configure: Regenerate. sim/rx/ChangeLog: * configure: Regenerate. sim/sh/ChangeLog: * configure: Regenerate. sim/sh64/ChangeLog: * configure: Regenerate. sim/v850/ChangeLog: * configure: Regenerate.
2017-09-04Define an error function in the PPC simulator library.John Baldwin2-0/+15
Previously this used the error function from GDB directly when linked against GDB instead of the error method in the host callbacks structure. This was exposed via a link error when GDB was converted to C++. The error function invokes the error callback similar to sim_io_error. Note that there are also error functions in sim/ppc/main.c and sim/ppc/misc.c. The ppc libsim.a expects each consumer to provide several symbols used by the library including "error". sim-calls.c provides these symbols when the library is linked into gdb. The dgen, igen, tmp-filter, tmp-ld-decode, tmp-ld-cache, and tmp-ld-insn programs use the functions from misc.c. psim uses the functions from main.c. sim/ppc/ChangeLog: PR sim/20863 * sim_calls.c (error): New function.
2017-09-04Fix simulatorAnthony Green2-7/+16
2017-08-29Fix simulation of MSP430's open system call.Jozef Lawrynowicz2-10/+30
* sim/msp430/msp430-sim.c (maybe_perform_syscall): Fix passing of arguments for variadic syscall "open".
2017-06-02Correct check for endiannessMichael Eager2-1/+5
* interp.c: (target_big_endian): target endianess recognition fix.
2017-05-24Refactor disassembler selectionYao Qi2-1/+9
Nowadays, opcodes/disassemble.c:disassembler selects the proper disassembler according to ABFD only. However, it actually selects disassemblers according to arch, mach, endianess, and abfd. This patch adds them to the parameters of disassembler, so that its caller can still select disassemblers in case that abfd is NULL (a typical case in GDB). There isn't any functionality change. binutils: 2017-05-24 Yao Qi <yao.qi@linaro.org> * objdump.c (disassemble_data): Caller update. include: 2017-05-24 Yao Qi <yao.qi@linaro.org> * dis-asm.h (disassembler): Update declaration. opcodes: 2017-05-24 Yao Qi <yao.qi@linaro.org> * disassemble.c (disassembler): Add arguments a, big and mach. Use them. sim/common: 2017-05-24 Yao Qi <yao.qi@linaro.org> * sim-trace.c (trace_disasm): Caller update.
2017-04-22Fix ldn/stn multiple instructions. Fix testcases with unaligned data.Jim Wilson14-202/+454
sim/aarch64/ * simulator.c (vec_load): Add M argument. Rewrite to iterate over registers based on structure size. (LD4, LD3, LD2, LD1_2, LD1_3, LD1_4): Pass new arg to vec_load. (LD1_1): Replace with call to vec_load. (vec_store): Add new M argument. Rewrite to iterate over registers based on structure size. (ST4, ST3, ST2, ST1_2, ST1_3, ST1_4): Pass new arg to vec_store. (ST1_1): Replace with call to vec_store. sim/testsuite/sim/aarch64/ * fcvtz.s, fstur.s, ldn_single.s, ldnr.s, mla.s, mls.s, uzp.s: Align data. * sumulh.s: Delete unnecessary data alignment. * stn_single.s: Align data. Fix unaligned ldr insns. Adjust cmp arguments to match change. * ldn_multiple.s, stn_multiple.s: New.
2017-04-08Add support for fcvtl and fcvtl2.Jim Wilson4-0/+112
sim/aarch64/ * simulator.c (do_vec_FCVTL): New. (do_vec_op1): Call do_vec_FCVTL. sim/testsuite/sim/aarch64/ * fcvtl.s: New.
2017-04-08Support the fcmXX zero instructions.Jim Wilson4-0/+232
sim/aarch64/ * simulator.c (do_scalar_FCMGE_zero): New. (do_scalar_FCMLE_zero, do_scalar_FCMGT_zero, do_scalar_FCMEQ_zero) (do_scalar_FCMLT_zero): Likewise. (do_scalar_vec): Add calls to new functions. sim/testsuite/sim/aarch64/ * fcmXX.s: New.
2017-03-25Fix bug with cmn/adds where C flag was incorrectly set.Jim Wilson4-1/+27
sim/aarch64/ * simulator.c (set_flags_for_add32): Cast result to uint32_t in carry flag check. sim/testsuite/sim/aarch64/ * adds.s: Add checks for values -2 and 1, where C is not set.
2017-03-03Fix umulh and smulh bugs. Fix bugs in last week's sumov.s testsuite.Jim Wilson5-9/+89
sim/aarch64/ * simulator.c (mul64hi): Shift carry left by 32. (smulh): Change signum to negate. If negate, invert result, and add carry bit if low part of multiply result is zero. sim/testsuite/sim/aarch64/ * sumov.s: Correct compare test values. * sumulh.s: New.
2017-02-25Add missing smov support, and clean up existing umov support.Jim Wilson4-75/+227
sim/aarch64/ * simulator.c (do_vec_SMOV_into_scalar): New. (do_vec_UMOV_into_scalar): Renamed from do_vec_MOV_into_scalar. Rewritten. (do_vec_UMOV): Merged into do_vec_UMOV_into_scalar and deleted. (do_vec_op1): Move do_vec_TRN call and do_vec_UZP call. Add do_vec_SMOV_into_scalar call. Delete do_vec_MOV_into_scalar and do_vec_UMOV calls. Add do_vec_UMOV_into_scalar call. sim/testsuite/sim/aarch64/ * sumov.s: New.
2017-02-25Add missing cnt (popcount) instruction support.Jim Wilson4-0/+94
sim/aarch64/ * simulator.c (popcount): New. (do_vec_CNT): New. (do_vec_op1): Add do_vec_CNT call. sim/testsuite/sim/aarch64/ * cnt.s: New.
2017-02-19Fix for aarch64 sim sxtl/uxtl insns, plus another fix for addv.Jim Wilson8-36/+157
sim/aarch64/ * simulator.c (do_vec_ADDV): Mov val declaration inside each case, with type set to input type size. (do_vec_xtl): Change bias from 3 to 4 for byte case. sim/testsuite/sim/aarch64/ * bit.s: Change cmp immediates to account for addv bug fix. * cmtst.s, ldn_single.s, stn_single.s: Likewise. * xtl.s: New.
2017-02-14Add self to aarch64 maintainers. Fix mla instruction.Jim Wilson6-49/+128
sim/ * MAINTAINTERS (aarch64): Add myself. sim/aarch64/ * simulator.c (do_vec_MLA): Rewrite switch body. sim/testsuite/sim/aarch64/ * mla.s: New.
2017-02-14Fix bit/bif instructions.Jim Wilson4-10/+107
sim/aarch64/ * simulator.c (do_vec_bit): Change loop limits from 16 and 8 to 4 and 2. Move test_false if inside loop. Fix logic for computing result stored to vd. sim/testsuite/sim/aarch64 * bit.s: New.
2017-02-14Add ldn/stn single support, fix ldnr support.Jim Wilson6-269/+698
sim/aarch64/ * simulator.c: (LDn_STn_SINGLE_LANE_AND_SIZE): New. (do_vec_LDn_single, do_vec_STn_single): New. (do_vec_LDnR): Add and set new nregs var. Replace switch on nregs with loop over nregs using new var n. Add n times size to address in loop. Add n to vd in loop. (do_vec_load_store): Add comment for instruction bit 24. New var single to hold instruction bit 24. Add new code to use single. Move ldnr support inside single if statements. Fix ldnr register counts inside post if statement. Change HALT_NYI calls to HALT_UNALLOC. sim/testsuite/sim/aarch64/ * ldn_single.s: New. * ldnr.s: New. * stn_single.s: New.
2017-02-13sim: use ARRAY_SIZE instead of ad-hoc sizeof calculationsMike Frysinger39-62/+141
2017-01-23Add support for cmtst.Jim Wilson4-0/+113
sim/aarch64/ * simulator.c (do_vec_compare): Add case 0x23 for CMTST. sim/testsuite/sim/aarch64/ * cmtst.s: New.
2017-01-17Fixes for addv and xtn2 instructions.Jim Wilson5-31/+158
sim/aarch64/ * simulator.c (do_vec_ADDV): Call aarch64_set_vec_u64 instead of aarch64_set_reg_u64. In case 2, call HALT_UNALLOC if not full. In case 3, call HALT_UNALLOC unconditionally. (do_vec_XTN): Delete shifts. In case 2, change index from i + 4 to i + 2. Delete if on bias, change index to i + bias * X. sim/testsuite/sim/aarch64/ * addv.s: New. * xtn.s: New.
2017-01-09Fix problems with the implementation of the uzp1 and uzp2 instructions.Jim Wilson4-17/+273
sim/aarch64/ * simulator.c (do_vec_UZP): Rewrite. sim/testsuite/sim/aarch64/ * uzp.s: New.
2017-01-04Five fixes, for fcsel, fcvtz, fminnm, mls, and non-widening mul.Jim Wilson9-33/+618
sim/aarch64/ * cpustate.c: Include math.h. (aarch64_set_FP_float): Use signbit to check for signed zero. (aarch64_set_FP_double): Likewise. * simulator.c (do_vec_MOV_immediate, case 0x8): Add missing break. (do_vec_mul): In all DO_VEC_WIDENING_MUL calls, make second and fourth args same size as third arg. (fmaxnm): Use isnan instead of fpclassify. (fminnm, dmaxnm, dminnm): Likewise. (do_vec_MLS): Reverse order of subtraction operands. (dexSimpleFPCondSelect): Call aarch64_get_FP_double or aarch64_get_FP_float to get source register contents. (UINT_MIN, ULONG_MIN, FLOAT_UINT_MAX, FLOAT_UINT_MIN, DOUBLE_UINT_MAX, DOUBLE_UINT_MIN, FLOAT_ULONG_MAX, FLOAT_ULONG_MIN, DOUBLE_ULONG_MAX, DOUBLE_ULONG_MIN): New. (do_fcvtzu): Use ULONG instead of LONG, and UINT instead of INT in raise_exception calls. sim/testsuite/sim/aarch64/ * fcsel.s: New. * fcvtz.s: New. * fminnm.s: New. * mls.s: New. * mul.s: New.
2017-01-01update copyright year range in GDB filesJoel Brobecker576-576/+576
This applies the second part of GDB's End of Year Procedure, which updates the copyright year range in all of GDB's files. gdb/ChangeLog: Update copyright year range in all GDB files.
2016-12-21Fix bugs with float compare and Inf operands.Jim Wilson4-0/+184
sim/aarch64/ * simulator.c (set_flags_for_float_compare): Add code to handle Inf. Add comment to document NaN issue. (set_flags_for_double_compare): Likewise. sim/testsuite/sim/aarch64/ * fcmp.s: New.
2016-12-14MAINTAINERS: Add myself as a MIPS maintainerMaciej W. Rozycki2-0/+6
* MAINTAINERS (Maintainers for particular sims): Add myself as a MIPS maintainer.
2016-12-13Fix aarch64 sim bug with adds64, and add testcases for last 3 bug fixes.Jim Wilson7-45/+309
sim/aarch64 * simulator.c (NEG, POS): Move before set_flags_for_add64. (set_flags_for_add64): Replace with a modified copy of set_flags_for_sub64. sim/testsuite/sim/aarch64 * testutils.inc (pass): Move .Lpass to start. (fail): Move .Lfail to start. Return 1 instead of 0. (start): Moved .Lpass and .Lfail to here. * adds.s: New. * fstur.s: New. * tbnz.s: New.
2016-12-03Fix bugs with tbnz/tbz instructions.users/ARM/embedded-binutils-master-2016q4Jim Wilson2-3/+8
sim/aarch64 * simulator.c (tbnz, tbz): Cast 1 to uint64_t before shifting. (dexTestBranchImmediate): Shift high bit of pos by 5 not 4.
2016-12-01Fix typo in ChangeLog entry.Jim Wilson1-1/+1
2016-12-01Fix bug with FP stur instructions.Jim Wilson2-6/+11
sim/aarch64 * simulator.c (fsturs): Switch use of rn and st variables. (fsturd, fsturq): Likewise
2016-11-12sim: mips: add PR info to ChangeLogMike Frysinger1-0/+2
2016-11-11sim: mips: fix dv-tx3904cpu build errorMike Frysinger2-0/+10
When building for mipstx39-rtems4.12 targets, some funcs use SD and CPU implicitly. Restore the defines for these to the local sd and cpu vars. This was broken by the clean up in commit d47f5b30d8481272e9480118bdcb. Reported-by: Joel Sherrill <joel.sherrill@oarcorp.com>
2016-11-11sim: mips: fix builds for r3900 cpus due to missing check_u64Mike Frysinger2-0/+5
2016-10-18sim: avr: move changelog entries to subdirMike Frysinger2-7/+7
2016-08-16sim: m68hc11: use standard STATIC_INLINE helperMike Frysinger2-25/+34
Rather than redefine inline locally, use the common STATIC_INLINE.
2016-08-15sim: unify symbol table handlingMike Frysinger17-170/+164
The common sim tracing code already handles loading and tracking of symbols from the target program so that it can show symbol info in trace/disassembly calls. Once we touch up the trace code and add a few API callbacks, ports don't need to do loading and searching of symbol tables themselves anymore.
2016-08-13sim: m68hc11: standardize sim_cpu namingMike Frysinger10-347/+366
We use "sim_cpu *cpu" in the sim code base, not "struct _sim_cpu" or the name "proc", so clean up this sim to follow along.
2016-08-13sim: m68hc11: fix up various prototype related warningsMike Frysinger8-12/+29
A few funcs are only used locally, so mark them static to avoid warnings due to -Wmissing-prototypes. Some funcs cast the return value wrong, so drop them (and let void * just work by default). Update some prototypes to be new style.
2016-08-13sim: cgen: constify mode_namesMike Frysinger3-2/+7
2016-08-13sim: cgen: drop unused argv/envp definitionsMike Frysinger2-8/+5
The common argv/envp are used now by all ports, so drop this old cgen fragment.
2016-08-13sim: bfin: split out common mach/model defines into arch.h [PR sim/20438]Mike Frysinger4-26/+55
The current machs.h mixes common enums with Blackfin-specific defines. This causes us troubles with header inclusion order such that we can't drop the old SIM_CPU typedef (which is duplicated in common code). By splitting the two up, we can unwind this dependency chain, and drop the old typedef. It also fixes building with older gcc versions.
2016-08-12Undo the previous change to the aarch64 sim - exporting aarch64_step() - and ↵Nick Clifton3-9/+19
instead make aarch64_run correctly process sim events. * simulator.c (aarch64_step): Revert pervious delta. (aarch64_run): Call sim_events_tick after each instruction is simulated, and if necessary call sim_events_process. * simulator.h: Revert previous delta.
generated by cgit v1.1 at 2024-11-19 16:20:52 +0000