Age | Commit message (Collapse) | Author | Files | Lines |
|
This converts some of the macros that access struct bfd fields to
inline functions.
bfd/
* archive.c (bfd_generic_archive_p): Use bfd_set_thin_archive.
* bfd-in.h (bfd_get_filename, bfd_get_cacheable, bfd_get_format),
(bfd_get_target, bfd_get_flavour, bfd_family_coff, bfd_big_endian),
(bfd_little_endian, bfd_header_big_endian, bfd_header_little_endian),
(bfd_get_file_flags, bfd_applicable_file_flags),
(bfd_applicable_section_flags, bfd_has_map, bfd_is_thin_archive),
(bfd_valid_reloc_types, bfd_usrdata, bfd_get_start_address),
(bfd_get_symcount, bfd_get_outsymbols, bfd_count_sections),
(bfd_get_dynamic_symcount, bfd_get_symbol_leading_char): Delete.
* bfd/bfd.c (bfd_get_filename, bfd_get_cacheable, bfd_get_format),
(bfd_get_file_flags, bfd_get_start_address, bfd_get_symcount),
(bfd_get_dynamic_symcount, bfd_get_outsymbols, bfd_count_sections),
(bfd_has_map, bfd_is_thin_archive, bfd_set_thin_archive),
(bfd_usrdata, bfd_set_usrdata): New inline functions.
* targets.c (bfd_get_target, bfd_get_flavour),
(bfd_applicable_file_flags, bfd_family_coff, bfd_big_endian),
(bfd_little_endian, bfd_header_big_endian),
(bfd_header_little_endian, bfd_applicable_section_flags),
(bfd_get_symbol_leading_char): New inline functions.
* bfd-in2.h: Regenerate.
binutils/
* ar.c (write_archive): Use bfd_set_thin_archive.
gdb/
* gdb_bfd.c (gdb_bfd_ref, gdb_bfd_unref): Use bfd_set_usrdata.
* dwarf2read.c (dwarf2_read_gdb_index, dwarf2_read_debug_names),
(read_indirect_string_from_dwz): Use bfd accessor.
* dwarf2read.h (struct dwz_file <filename>): Likewise.
* machoread.c (macho_symfile_read_all_oso): Likewise.
* solib.c (solib_bfd_open): Likewise.
ld/
* ldelf.c (ldelf_after_open, ldelf_place_orphan
* ldlang.c (walk_wild_file, lang_process): Use bfd_usrdata.
(load_symbols, ldlang_add_file): Use bfd_set_usrdata.
* ldmain.c (add_archive_element): Use bfd_usrdata.
* ldlang.h (bfd_input_just_syms): New inline function.
* emultempl/aarch64elf.em (build_section_lists): Use it.
* emultempl/mmo.em (mmo_place_orphan): Likewise.
* emultempl/pe.em (gld_${EMULATION_NAME}_place_orphan): Likewise.
* emultempl/pep.em (gld_${EMULATION_NAME}_place_orphan): Likewise.
* emultempl/ppc64elf.em (build_section_lists): Likewise.
sim/
* ppc/emul_generic.c (emul_add_tree_options): Delete old bfd code.
|
|
This large patch removes the unnecessary bfd parameter from various
bfd section macros and functions. The bfd is hardly ever used and if
needed for the bfd_set_section_* or bfd_rename_section functions can
be found via section->owner except for the com, und, abs, and ind
std_section special sections. Those sections shouldn't be modified
anyway.
The patch also removes various bfd_get_section_<field> macros,
replacing their use with bfd_section_<field>, and adds
bfd_set_section_lma. I've also fixed a minor bug in gas where
compressed section renaming was done directly rather than calling
bfd_rename_section. This would have broken bfd_get_section_by_name
and similar functions, but that hardly mattered at such a late stage
in gas processing.
bfd/
* bfd-in.h (bfd_get_section_name, bfd_get_section_vma),
(bfd_get_section_lma, bfd_get_section_alignment),
(bfd_get_section_size, bfd_get_section_flags),
(bfd_get_section_userdata): Delete.
(bfd_section_name, bfd_section_size, bfd_section_vma),
(bfd_section_lma, bfd_section_alignment): Lose bfd parameter.
(bfd_section_flags, bfd_section_userdata): New.
(bfd_is_com_section): Rename parameter.
* section.c (bfd_set_section_userdata, bfd_set_section_vma),
(bfd_set_section_alignment, bfd_set_section_flags, bfd_rename_section),
(bfd_set_section_size): Delete bfd parameter, rename section parameter.
(bfd_set_section_lma): New.
* bfd-in2.h: Regenerate.
* mach-o.c (bfd_mach_o_init_section_from_mach_o): Delete bfd param,
update callers.
* aoutx.h, * bfd.c, * coff-alpha.c, * coff-arm.c, * coff-mips.c,
* coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c,
* compress.c, * ecoff.c, * elf-eh-frame.c, * elf-hppa.h,
* elf-ifunc.c, * elf-m10200.c, * elf-m10300.c, * elf-properties.c,
* elf-s390-common.c, * elf-vxworks.c, * elf.c, * elf32-arc.c,
* elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c,
* elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-csky.c,
* elf32-d10v.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c,
* elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c,
* elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c,
* elf32-m32r.c, * elf32-m68hc1x.c, * elf32-m68k.c, * elf32-mcore.c,
* elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c,
* elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c,
* elf32-nios2.c, * elf32-or1k.c, * elf32-ppc.c, * elf32-pru.c,
* elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c,
* elf32-score7.c, * elf32-sh.c, * elf32-spu.c, * elf32-tic6x.c,
* elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-visium.c,
* elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c,
* elf64-bpf.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mmix.c,
* elf64-ppc.c, * elf64-s390.c, * elf64-sparc.c, * elf64-x86-64.c,
* elflink.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c,
* elfxx-aarch64.c, * elfxx-mips.c, * elfxx-sparc.c,
* elfxx-tilegx.c, * elfxx-x86.c, * i386msdos.c, * linker.c,
* mach-o.c, * mmo.c, * opncls.c, * pdp11.c, * pei-x86_64.c,
* peicode.h, * reloc.c, * section.c, * syms.c, * vms-alpha.c,
* xcofflink.c: Update throughout for bfd section macro and function
changes.
binutils/
* addr2line.c, * bucomm.c, * coffgrok.c, * dlltool.c, * nm.c,
* objcopy.c, * objdump.c, * od-elf32_avr.c, * od-macho.c,
* od-xcoff.c, * prdbg.c, * rdcoff.c, * rddbg.c, * rescoff.c,
* resres.c, * size.c, * srconv.c, * strings.c, * windmc.c: Update
throughout for bfd section macro and function changes.
gas/
* as.c, * as.h, * dw2gencfi.c, * dwarf2dbg.c, * ecoff.c,
* read.c, * stabs.c, * subsegs.c, * subsegs.h, * write.c,
* config/obj-coff-seh.c, * config/obj-coff.c, * config/obj-ecoff.c,
* config/obj-elf.c, * config/obj-macho.c, * config/obj-som.c,
* config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c,
* config/tc-arm.c, * config/tc-avr.c, * config/tc-bfin.c,
* config/tc-bpf.c, * config/tc-d10v.c, * config/tc-d30v.c,
* config/tc-epiphany.c, * config/tc-fr30.c, * config/tc-frv.c,
* config/tc-h8300.c, * config/tc-hppa.c, * config/tc-i386.c,
* config/tc-ia64.c, * config/tc-ip2k.c, * config/tc-iq2000.c,
* config/tc-lm32.c, * config/tc-m32c.c, * config/tc-m32r.c,
* config/tc-m68hc11.c, * config/tc-mep.c, * config/tc-microblaze.c,
* config/tc-mips.c, * config/tc-mmix.c, * config/tc-mn10200.c,
* config/tc-mn10300.c, * config/tc-msp430.c, * config/tc-mt.c,
* config/tc-nds32.c, * config/tc-or1k.c, * config/tc-ppc.c,
* config/tc-pru.c, * config/tc-rl78.c, * config/tc-rx.c,
* config/tc-s12z.c, * config/tc-s390.c, * config/tc-score.c,
* config/tc-score7.c, * config/tc-sh.c, * config/tc-sparc.c,
* config/tc-spu.c, * config/tc-tic4x.c, * config/tc-tic54x.c,
* config/tc-tic6x.c, * config/tc-tilegx.c, * config/tc-tilepro.c,
* config/tc-v850.c, * config/tc-visium.c, * config/tc-wasm32.c,
* config/tc-xc16x.c, * config/tc-xgate.c, * config/tc-xstormy16.c,
* config/tc-xtensa.c, * config/tc-z8k.c: Update throughout for
bfd section macro and function changes.
* write.c (compress_debug): Use bfd_rename_section.
gdb/
* aarch64-linux-tdep.c, * arm-tdep.c, * auto-load.c,
* coff-pe-read.c, * coffread.c, * corelow.c, * dbxread.c,
* dicos-tdep.c, * dwarf2-frame.c, * dwarf2read.c, * elfread.c,
* exec.c, * fbsd-tdep.c, * gcore.c, * gdb_bfd.c, * gdb_bfd.h,
* hppa-tdep.c, * i386-cygwin-tdep.c, * i386-fbsd-tdep.c,
* i386-linux-tdep.c, * jit.c, * linux-tdep.c, * machoread.c,
* maint.c, * mdebugread.c, * minidebug.c, * mips-linux-tdep.c,
* mips-sde-tdep.c, * mips-tdep.c, * mipsread.c, * nto-tdep.c,
* objfiles.c, * objfiles.h, * osabi.c, * ppc-linux-tdep.c,
* ppc64-tdep.c, * record-btrace.c, * record-full.c, * remote.c,
* rs6000-aix-tdep.c, * rs6000-tdep.c, * s390-linux-tdep.c,
* s390-tdep.c, * solib-aix.c, * solib-dsbt.c, * solib-frv.c,
* solib-spu.c, * solib-svr4.c, * solib-target.c,
* spu-linux-nat.c, * spu-tdep.c, * symfile-mem.c, * symfile.c,
* symmisc.c, * symtab.c, * target.c, * windows-nat.c,
* xcoffread.c, * cli/cli-dump.c, * compile/compile-object-load.c,
* mi/mi-interp.c: Update throughout for bfd section macro and
function changes.
* gcore (gcore_create_callback): Use bfd_set_section_lma.
* spu-tdep.c (spu_overlay_new_objfile): Likewise.
gprof/
* corefile.c, * symtab.c: Update throughout for bfd section
macro and function changes.
ld/
* ldcref.c, * ldctor.c, * ldelf.c, * ldlang.c, * pe-dll.c,
* emultempl/aarch64elf.em, * emultempl/aix.em,
* emultempl/armcoff.em, * emultempl/armelf.em,
* emultempl/cr16elf.em, * emultempl/cskyelf.em,
* emultempl/m68hc1xelf.em, * emultempl/m68kelf.em,
* emultempl/mipself.em, * emultempl/mmix-elfnmmo.em,
* emultempl/mmo.em, * emultempl/msp430.em,
* emultempl/nios2elf.em, * emultempl/pe.em, * emultempl/pep.em,
* emultempl/ppc64elf.em, * emultempl/xtensaelf.em: Update
throughout for bfd section macro and function changes.
libctf/
* ctf-open-bfd.c: Update throughout for bfd section macro changes.
opcodes/
* arc-ext.c: Update throughout for bfd section macro changes.
sim/
* common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c,
* erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c,
* m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c,
* rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c,
* rx/trace.c: Update throughout for bfd section macro changes.
|
|
This macro says:
/* Cast from const char * to char * so that caller can assign to
a char * without a warning. */
I reckon that isn't such a good idea since it can result in char*
variables where const char* is appropriate. Not very many places
need the char* cast.
bfd/
* aout-target.h (object_p): Formatting.
* bfd-in.h (bfd_get_filename): Don't cast to char*.
* corefile.c (generic_core_file_matches_executable_p): Constify
variables and remove cast.
* bfd-in2.h: Regenerate.
binutils/
* nm.c (print_object_filename_bsd, print_object_filename_sysv),
(print_object_filename_posix, print_archive_filename_bsd),
(print_archive_filename_sysv, print_archive_filename_posix),
(print_archive_member_bsd, print_archive_member_sysv),
(print_archive_member_posix): Constify parameter.
(struct output_fns <print_object_filename, print_archive_filename>),
(<print_archive_member>): Likewise.
* objcopy.c (copy_archive): Add cast for make_tempdir.
ld/
* emultempl/elf32.em (gld${EMULATION_NAME}_search_needed): Constify
variable.
* emultempl/pe.em (gld_${EMULATION_NAME}_after_open): Likewise.
* emultempl/pep.em (gld_${EMULATION_NAME}_after_open): Likewise.
gdb/
* coffread.c (coff_symfile_read): Constify filename variable.
* dbxread.c (dbx_symfile_init, coffstab_build_psymtabs),
(elfstab_build_psymtabs, stabsect_build_psymtabs): Likewise.
* gdb_bfd.c (gdb_bfd_close_or_warn): Likewise.
* solib.c (reload_shared_libraries_1): Likewise.
* symfile.c (reread_symbols): Likewise.
* solib-aix.c (solib_aix_bfd_open): Add cast for xfree of filename.
* solib-darwin.c (darwin_bfd_open): Likewise.
* symfile-mem.c (symbol_file_add_from_memory): Likewise.
sim/cris/
* sim-if.c (sim_open): Constify filename variable.
|
|
Add tests for 32-bit and 64-bit unordered compare instructions.
sim/testsuite/sim/or1k/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
* fpu-unordered.S: New file.
* fpu64a32-unordered.S: New file.
|
|
This is a simple test to ensure that the l.adrp instruction can be assembled and
simulated correctly.
sim/testsuite/sim/or1k/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
* adrp.S: New file.
|
|
This is a very basic test but it ensure the machine is wired up
correctly and that the assembler works.
sim/testsuite/sim/or1k/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
* fpu64a32.S: New file.
|
|
Define and wire up unordered floating point comparison operations for cgen
targets. This patch depends on my posted cgen patches[0].
[0] https://www.sourceware.org/ml/cgen/2019-q2/msg00013.html
sim/common/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
* cgen-accfp.c (unorderedsf, unordereddf): New functions.
(cgen_init_accurate_fpu): Wire up unorderedsf and unordereddf.
* cgen-fpu.h (cgen_fp_ops): Define fields unorderedsf and unordereddf.
|
|
Up until now these have not been used in any CGEN targets, add them as
they are now used by OpenRISC.
sim/common/ChangeLog:
* cgen-accfp.c (floatdidf, fixdfdi): New functions.
(cgen_init_accurate_fpu): Add floatdidf and fixdfdi.
|
|
This picks up changes for:
- new orfpx64a32 spec
- new unordered instructions
- documentation and symbol updates
sim/ChangeLog:
* or1k/cpu.c: Regenerate.
* or1k/cpu.h: Regenerate.
* or1k/decode.c: Regenerate.
* or1k/decode.h: Regenerate.
* or1k/model.c: Regenerate.
* or1k/sem-switch.c: Regenerate.
* or1k/sem.c: Regenerate.
|
|
When using writes to memory through a struct to merge and extract
multi-word value, it is the endianness of the host, not the target
that affects which order the component words need to be written into
the structure.
Of the 5 functions adjusted here 4 of them are unused. The 5th,
JOINSIDF will soon be used by the or1k target.
For or1k, simulated on x86-64, this change fixes this function so that
the correct bytes are now returned.
sim/common/ChangeLog:
* cgen-ops.h (SUBWORDXFSI): Compare HOST_BYTE_ORDER not
CURRENT_TARGET_BYTE_ORDER.
(SUBWORDTFSI): Likewise.
(JOINSIDF): Likewise.
(JOINSIXF): Likewise.
(JOINSITF): Likewise.
|
|
This commit:
commit ef9866970ce6683d40465fb7c3168f87a1dcd1b7
Date: Thu Mar 28 06:40:30 2019 +0900
sim/common: convert sim-arange to use sim-inline
broke many simulator targets. I fixed aarch64 in a previous commit
without realising how many other target were also broken.
This commit adds the missing includes (sim-assert.h and libiberty.h),
which seem to be needed by many simulator targets, in a central
location, this should fix most builds.
sim/common/ChangeLog:
* sim-base.h: Add 'sim-assert.h' include.
* sim-basics.h: Add 'libiberty.h' include.
|
|
This commit:
commit ef9866970ce6683d40465fb7c3168f87a1dcd1b7
Date: Thu Mar 28 06:40:30 2019 +0900
sim/common: convert sim-arange to use sim-inline
Broke the simulator build for aarch64 - some required macros are no
longer included where needed, fixed in this commit.
sim/aarch64/ChangeLog:
* cpustate.c: Add 'libiberty.h' include.
* interp.c: Add 'sim-assert.h' include.
|
|
During building of several cgen simulator's I notices the below
warnings. Adding includes fixes these.
Including config.h allows stdio.h to properly configure itself to expose
asprintf().
The other warnings for abort, free, memset, strlen are trivial.
Warnings:
../../../binutils-gdb/sim/or1k/../common/sim-watch.c: In function ‘sim_watchpoint_install’:
../../../binutils-gdb/sim/or1k/../common/sim-watch.c:415:10: warning: implicit declaration of function ‘asprintf’; did you mean ‘vasprintf’? [-Wimplicit-function-declaration]
if (asprintf (&name, "watch-%s-%s",
^~~~~~~~
vasprintf
../../../binutils-gdb/sim/lm32/../common/hw-device.c: In function ‘hw_strdup’:
../../../binutils-gdb/sim/lm32/../common/hw-device.c:59:34: warning: implicit declaration of function ‘strlen’ [-Wimplicit-function-declaration]
char *dup = hw_zalloc (me, strlen (str) + 1);
^~~~~~
../../../binutils-gdb/sim/lm32/../common/hw-events.c: In function ‘hw_event_queue_schedule’:
../../../binutils-gdb/sim/lm32/../common/hw-events.c:92:3: warning: implicit declaration of function ‘memset’ [-Wimplicit-function-declaration]
memset (&dummy, 0, sizeof dummy);
^~~~~~
../../../binutils-gdb/sim/lm32/../common/hw-handles.c: In function ‘hw_handle_remove_ihandle’:
../../../binutils-gdb/sim/lm32/../common/hw-handles.c:211:4: warning: implicit declaration of function ‘free’ [-Wimplicit-function-declaration]
free (delete);
^~~~
../../../binutils-gdb/sim/lm32/../common/sim-fpu.c: In function ‘pack_fpu’:
../../../binutils-gdb/sim/lm32/../common/sim-fpu.c:292:7: warning: implicit declaration of function ‘abort’ [-Wimplicit-function-declaration]
abort ();
^~~~~
sim/common/ChangeLog:
* sim-options.c: Include "config.h".
Include <stdio.h>.
* sim-watch.c: Include "config.h".
Include <stdio.h>.
* hw-device.c: Include <string.h>.
* hw-events.c: Include <string.h>.
* hw-handles.c: Include <stdlib.h>.
* sim-fpu.c: Include <stdlib.h>.
|
|
This fixes a TODO item and also fixes an error which we get when
building with no optimizations (-O0) in at least gcc 8.2.1.
Tested with sims that use cgen code lm32, or1k, cris, m32r and inlining
is working corretly.
Reference Error:
gcc -DHAVE_CONFIG_H -DWITH_DEFAULT_MODEL='"or1200"' -DWITH_ALIGNMENT=STRICT_ALIGNMENT \
-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31 -DWITH_TARGET_ADDRESS_BITSIZE=32 \
-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG -DDEFAULT_INLINE=0 -DWITH_SCACHE=16384 \
-I. -I../../../binutils-gdb/sim/or1k -I../common -I../../../binutils-gdb/sim/or1k/../common \
-I../../include -I../../../binutils-gdb/sim/or1k/../../include -I../../bfd \
-I../../../binutils-gdb/sim/or1k/../../bfd -I../../opcodes -I../../../binutils-gdb/sim/or1k/../../opcodes \
-g -o run nrun.o libsim.a ../../bfd/libbfd.a ../../opcodes/libopcodes.a ../../libiberty/libiberty.a \
-ldl -lz -lm
/usr/bin/ld: libsim.a(mloop.o): in function `extract':
/home/shorne/work/openrisc/gdb-musl/sim/or1k/mloop.c:82: undefined reference to `sim_addr_range_hit_p'
/usr/bin/ld: /home/shorne/work/openrisc/gdb-musl/sim/or1k/mloop.c:83: undefined reference to `sim_addr_range_hit_p'
collect2: error: ld returned 1 exit status
make[3]: *** [Makefile:305: run] Error 1
sim/common/ChangeLog:
* Make-common.in (sim-arange_h): Remove sim-arange.c
* sim-arange.c: Remove SIM_ARANGE_C.
Add ifdef for _SIM_ARANGE_C_.
Include "sim-arange.h".
Remove include for unused "sim-assert.h".
Remove DEFINE_INLINE_P. Remove DEFINE_NON_INLINE_P.
(sim_addr_range_add): Declare as INLINE_SIM_ARANGE.
(sim_addr_range_delete): Declare as INLINE_SIM_ARANGE.
(sim_addr_range_hit_p): Change from SIM_ARANGE_INLINE to
INLINE_SIM_ARANGE.
* sim-arange.h (sim_addr_range_add): Declare as
INLINE_SIM_ARANGE.
(sim_addr_range_delete): Declare as INLINE_SIM_ARANGE.
(sim_addr_range_hit_p) Declare as INLINE_SIM_ARANGE.
Remove definition of SIM_ARANGE_INLINE.
Remove [HAVE_INLINE].
Wrap include "sim-arange.c" in H_REVEALS_MODULE_P.
* sim-base.h: Include "sim-arange.h"
* sim-basics.h: Remove include of "sim-arange.h"
* sim-inline.c: Include "sim-arange.c"
* sim-inline.h: Define INLINE_SIM_ARANGE.
Define SIM_ARANGE_INLINE. Define EXTERN_SIM_ARANGE_P.
Define STATIC_INLINE_SIM_ARANGE. Define STATIC_SIM_ARANGE.
|
|
sim/ChangeLog:
* MAINTAINERS: Move Mike Frysinger to past maintainers' section.
|
|
|
|
Simon pointed out that the "common/" include change in gdb broke the
sim build. The problem was that the sim was using gdb's
create-version.sh, which changed.
This patch copies create-version.sh to the sim, so that it can
generate "version.c" in a way that works in the sim build.
Tested by rebuilding.
sim/common/ChangeLog
2019-01-26 Tom Tromey <tom@tromey.com>
* Make-common.in (version.c): Use sim's create-version.sh.
* create-version.sh: New file.
sim/ppc/ChangeLog
2019-01-26 Tom Tromey <tom@tromey.com>
* Makefile.in (version.c): Use sim's create-version.sh.
|
|
I applied the patch "Do not expand macros to 'defined'" by hand because
I couldn't apply it with git-am, and of course forgot to remove the
macro definitions. This patch fixes it, and also makes the ChangeLog
entry a bit cleaner.
|
|
Expanding a macro which contains 'defined' PP keyword is UB. It causes
a compilation failure when -Wexpansion-to-defined is used.
sim/common/Changelog:
2019-01-16 Pavel I. Kryukov <kryukov@frtk.ru>
* sim-arange.c: eliminate DEFINE_NON_INLINE_P
|
|
If HAVE_INLINE is false, SIM_ARANGE_INLINE is currently defined as
#define SIM_ARANGE_INLINE EXTERN
However, EXTERN is not defined anywhere, leading to errors such as:
In file included from
/mipt-mips/simulator/../../sim/common/sim-basics.h:147:0,
from /mipt-mips/simulator/export/gdb/sim-main.h:13,
from /mipt-mips/simulator/export/gdb/gdb_interface.cpp:7:
/mipt-mips/simulator/../../sim/common/sim-arange.h:71:27: error: ‘EXTERN’
does not name a type; did you mean ‘EUSERS’?
#define SIM_ARANGE_INLINE EXTERN
^
/mipt-mips/simulator/../../sim/common/sim-arange.h:76:1: note: in expansion
of macro ‘SIM_ARANGE_INLINE’
SIM_ARANGE_INLINE int
^~~~~~~~~~~~~~~~~
I (Simon) have reproduced the problem by simply removing the HAVE_INLINE
definition. This was originally reported by Pavel I. Kryukov
<kryukov@frtk.ru>.
sim/common/ChangeLog:
* sim-arange.h (SIM_ARANGE_INLINE): Change EXTERN to extern.
|
|
sim/common/Changelog:
2018-12-31 Pavel I. Kryukov <kryukov@frtk.ru>
* sim-base.h: Add 'extern C' if header is compiled with C++
|
|
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
The host syscall callback mechanism should take care of updating the
errcode within the CB_SYSCALL struct, and we should not be adjusting
the error code once the syscall has completed. We especially, should
not be rewriting the syscall errcode based on the value of errno some
time after running the host syscall, as there is no guarantee that
errno has not be overwritten.
To perform a syscall we call cb_syscall (in syscall.c). To return
from cb_syscall control passes through one of two exit paths these are
labeled FinishSyscall and ErrorFinish and are reached using goto
statements scattered throughout the cb_syscall function.
In FinishSyscall we store the syscall result in 'sc->result', and the
error code is transated to target encoding, and stored in
'sc->errcode'.
In ErrorFinish, we again store the syscall result in 'sc->result', and
fill in 'sc->errcode' by fetching the actual errno from the host with
the 'cb->get_errno' callback.
In both cases 'sc->errcode' will have been filled in with an
appropriate value.
Further, if we look at a specific syscall example, CB_SYS_open, in
this case the first thing we do is fetch the path to open from the
target with 'get_path', if this fails then the errcode is returned,
and we jump to FinishSyscall. Notice that in this case, no host
syscall may have been performed, for example a failure to read the
path to open out of simulated memory can return EINVAL without
performing any host syscall. Given that no host syscall has been
performed, reading the host errno makes absolutely no sense.
This commit removes from sim_syscall_multi the rewriting of
sc->errcode based on the value of errno, and instead relies on the
value stored in the cb_syscall.
sim/common/ChangeLog:
* sim-syscall.c (sim_syscall_multi): Don't update sc->errcode at
this point, it should have already been set in cb_syscall.
|
|
Don't assume that cgen is located within the binutils-gdb tree. We
already have CGEN_CPU_DIR and CPU_DIR defined, these are the cpu/
directory within cgen, and the cpu/ directory within binutils-cpu.
The cris target tries to find CPU_DIR relative to the cgen source
tree, which can be wrong when building with an out of tree cgen.
sim/cris/ChangeLog:
* Makefile.in: Replace uses of CGEN_CPU_DIR with CPU_DIR, and
remove the definition of CGEN_CPU_DIR.
|
|
When configuring with '--enbale-cgen-maint' the default for both the
opcodes/ and sim/ directories is to assume that the cgen source is
within the binutils-gdb source tree as binutils-gdb/cgen/.
In the old cvs days, this worked well, as cgen was just another
sub-module of the single cvs repository and could easily be checked
out within the binutils-gdb directory, and managed by cvs in the
normal way.
Now that binutils-gdb is in git, while cgen is still in cvs, placing
the cgen respository within the binutils-gdb tree is more troublesome,
and it would be nice if the two tools could be kept separate.
Luckily there is already some initial code in the configure.ac files
for both opcodes/ and sim/ to support having cgen be located outside
of the binutils-gdb tree, however, this was speculative code written
imagining a future where cgen would be built and installed to some
location.
Right now there is no install support for cgen, and so the configure
code in opcodes/ and sim/ doesn't really do anything useful. In this
commit I repurpose this code to allow binutils-gdb to be configured so
that it can make use of a cgen source directory that is outside of the
binutils-gdb tree.
With this commit applied it is now possible to configure and build
binutils-gdb like this:
/path/to/binutils-gdb/src/configure --enable-cgen-maint=/path/to/cgen/src/cgen/
make all-opcodes
make -C opcodes run-cgen-all
Just in case anyone is still using cgen inside the binutils-gdb tree,
I have left the default behaviour of '--enable-cgen-maint' (with no
parameter) unchanged, that is it looks for the cgen directory as
'binutils-gdb/cgen/'.
opcodes/ChangeLog:
* configure.ac (enable-cgen-maint): Support passing path to cgen
source tree.
* configure: Regenerate.
sim/ChangeLog:
* common/acinclude.m4 (enable-cgen-maint): Support passing path to
cgen source tree.
* cris/configure: Regenerate.
* frv/configure: Regenerate.
* iq2000/configure: Regenerate.
* lm32/configure: Regenerate.
* m32r/configure: Regenerate.
* or1k/configure: Regenerate.
* sh64/configure: Regenerate.
|
|
This removes a Cygwin-specific libtermcap hack that was dependent on
the presence of one of the multiple alternative libraries. The one it
was hard-coded to pick isn't included with Cygwin anymore.
According to Corinna, libtermcap was removed from Cygwin a long time
ago, and libncurses is used in Cygwin for a long time too.
The fix is to make Cygwin use the same autoconf code to figure out the
correct lib as any other target.
sim/erc32/Changelog:
2018-10-30 Joel Sherrill <joel@rtems.org>
* configure.ac: Remove the Cygwin-specific libtermcap.a hack
and use the standard logic to determine which library to use.
* configure: Regenerate.
|
|
Also fix the incorrect definitions of multiply and divide carry and
overflow float.
Changes to the instructions are made in the .cpu file, then we
regenerate the binutils and sim files.
The changes also required a few fixups for tests and additional sim helpers.
cpu/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
Stafford Horne <shorne@gmail.com>
* or1korbis.cpu (insn-opcode-mac): Add opcodes for MACU and MSBU.
(insn-opcode-alu-regreg): Add opcodes for MULD and MULDU.
(l-mul): Fix overflow support and indentation.
(l-mulu): Fix overflow support and indentation.
(l-muld, l-muldu, l-msbu, l-macu): New instructions.
(l-div); Remove incorrect carry behavior.
(l-divu): Fix carry and overflow behavior.
(l-mac): Add overflow support.
(l-msb, l-msbu): Add carry and overflow support.
opcodes/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
Stafford Horne <shorne@gmail.com>
* or1k-desc.c: Regenerate.
* or1k-desc.h: Regenerate.
* or1k-opc.c: Regenerate.
* or1k-opc.h: Regenerate.
* or1k-opinst.c: Regenerate.
sim/common/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
* cgen-ops.h (ADDCFDI): New function, add carry flag DI variant.
(ADDOFDI): New function, add overflow flag DI variant.
(SUBCFDI): New function, subtract carry flag DI variant.
(SUBOFDI): New function, subtract overflow flag DI variant.
sim/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
* or1k/cpu.h: Regenerate.
* or1k/decode.c: Regenerate.
* or1k/decode.h: Regenerate.
* or1k/model.c: Regenerate.
* or1k/sem-switch.c: Regenerate.
* or1k/sem.c: Regenerate:
sim/testsuite/sim/or1k/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
* div.S: Fix tests to match correct overflow/carry semantics.
* mul.S: Likewise.
gas/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
* testsuite/gas/or1k/allinsn.s: Add instruction tests for
l.muld, l.muldu, l.macu, l.msb, l.msbu.
* testsuite/gas/or1k/allinsn.d: Add test results for new
instructions.
|
|
This code was introduced back in 1998, and C99 appeared next year,
defining the `xor` as an 'alternative keyword' if iso646.h is
included. Moreover, C++98 defines it on the language level. As a
result, the code is not buildable with C++ compiler or if iso646.h is
included beforehand.
According to comment, `sim_cpu_core` is mostly a clone of `sim_core`,
so I renamed it to `byte_xor` as it's called in `sim_core`.
sim/common/ChangeLog:
* sim-core.h (sim_cpu_core): Rename cpu_core.xor to
cpu_core.byte_xor.
* sim-core.c (sim_core_set_xor): Likewise.
(sim_core_xor_read_buffer): Likewise.
(sim_core_xor_write_buffer): Likewise.
|
|
binutils/
* MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
ISA maintenance.
gdb/
* MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
ISA maintenance.
sim/
* MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
ISA maintenance.
|
|
[binutils]
* MAINTAINERS (RL78, RX): Remove myself as maintainer.
[sim]
* MAINTAINERS (rl78, m32c, rx, v850): Remove myself as maintainer.
|
|
Since I helped upstream the or1k port I would like to claim myself as
maintainer.
sim/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
* MAINTAINERS (or1k): Add myself as or1k maintainer.
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
When trying to run the update-gnulib.sh script in gdb, I get this:
Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1.
Aborting.
Apparently, it's an issue with a regex in automake that triggers a
warning starting with Perl 5.22. It has been fixed in automake 1.15.1.
So I think it's a good excuse to bump the versions of autoconf and
automake used in the gnulib import. And to avoid requiring multiple
builds of autoconf/automake, it was suggested that we bump the required
version of those tools for all binutils-gdb.
For autoconf, the 2.69 version is universally available, so it's an easy
choice. For automake, different distros and distro versions have
different automake versions. But 1.15.1 seems to be the most readily
available as a package. In any case, it's easy to build it from source.
I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ,
because I don't think they are useful in our case. They only specify a
lower bound for the acceptable version of automake/autoconf. That's
useful if you let the user choose the version of the tool they want to
use, but want to set a minimum version (because you use a feature that
was introduced in that version). In our case, we force people to use a
specific version anyway. For the autoconf version, we have the check in
config/override.m4 that enforces the version we want. It will be one
less thing to update next time we change autotools version.
I hit a few categories of problems that required some changes. They are
described below along with the chosen solutions.
Problem 1:
configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
Solution 1:
Adjust the code based on the example at that URL.
Problem 2 (in zlib/):
Makefile.am: error: required file './INSTALL' not found
Makefile.am: 'automake --add-missing' can install 'INSTALL'
Makefile.am: error: required file './NEWS' not found
Makefile.am: error: required file './AUTHORS' not found
Makefile.am: error: required file './COPYING' not found
Makefile.am: 'automake --add-missing' can install 'COPYING'
Solution 2:
Add the foreign option to AUTOMAKE_OPTIONS.
Problem 3:
doc/Makefile.am:20: error: support for Cygnus-style trees has been removed
Solution 3:
Remove the cygnus options.
Problem 4:
Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Solution 4:
Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is
already defined earlier).
Problem 5:
doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 5:
Rename .texinfo files to .texi.
Problem 6:
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 6:
Remove the hack at the bottom of doc/Makefile.am and use
the info-in-builddir automake option.
Problem 7:
doc/Makefile.am:35: error: required file '../texinfo.tex' not found
doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex'
Solution 7:
Use the no-texinfo.tex automake option. We also have one in
texinfo/texinfo.tex, not sure if we should point to that, or move it
(or a newer version of it added with automake --add-missing) to
top-level.
Problem 8:
Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory,
Makefile.am:131: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
Solution 8:
Use subdir-objects, that means adjusting references to some .o that will now
be in config/.
Problem 9:
configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from...
../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from...
../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from...
../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from...
configure.ac:375: the top level
Solution 9:
Use AC_LANG_SOURCE, or use proper quoting.
Problem 10 (in intl/):
configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS
/usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from...
/usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from...
/usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from...
/usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from...
/usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from...
/usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from...
/usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:7: the top level
Solution 10:
Add AC_USE_SYSTEM_EXTENSIONS in configure.ac.
ChangeLog:
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* README-maintainer-mode: Update version requirements.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
bfd/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
(INCLUDES): Rename to ...
(AM_CPPFLAGS): ... this.
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add
info-in-builddir no-texinfo.tex.
(info_TEXINFOS): Rename bfd.texinfo to bfd.texi.
* doc/bfd.texinfo: Rename to ...
* doc/bfd.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add
info-in-builddir no-texinfo.tex.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
config/ChangeLog:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
etc/ChangeLog:
* configure.in: Remove AC_PREREQ.
* configure: Re-generate.
gas/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects.
(TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix.
* configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles,
extra_objects): Add config/ prefix.
* doc/as.texinfo: Rename to...
* doc/as.texi: ... this.
* doc/Makefile.am: Rename as.texinfo to as.texi throughout.
Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and
info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gdb/ChangeLog:
* common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION,
PACKAGE_STRING, PACKAGE_TARNAME): Undefine.
* configure.ac: Remove AC_PREREQ, add missing quoting.
* gnulib/configure.ac: Modernize usage of
AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ.
* gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69.
(AUTOMAKE_VERSION): Bump to 1.15.1.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
* gnulib/aclocal.m4: Re-generate.
* gnulib/config.in: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
gdb/gdbserver/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
gdb/testsuite/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
gold/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting and usage
of AC_LANG_SOURCE.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* gconfig.in: Re-generate.
intl/ChangeLog:
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
ld/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to
ld.texi, ldint.texinfo to ldint.texi throughout.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
* README: Rename ld.texinfo to ld.texi, ldint.texinfo to
ldint.texi throughout.
* gen-doc.texi: Likewise.
* h8-doc.texi: Likewise.
* ld.texinfo: Rename to ...
* ld.texi: ... this.
* ldint.texinfo: Rename to ...
* ldint.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
libdecnumber/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libiberty/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
opcodes/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
* configure.ac: Remove AC_PREREQ.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
readline/ChangeLog.gdb:
* configure: Re-generate.
* examples/rlfe/configure: Re-generate.
sim/ChangeLog:
* All configure.ac: Remove AC_PREREQ.
* All configure: Re-generate.
zlib/ChangeLog.bin-gdb:
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add
foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
|
|
... and re-generate all possible configure files, since they may depend
on things in config/.
config/ChangeLog:
Sync with GCC
2018-06-08 Martin Liska <mliska@suse.cz>
* bootstrap-mpx.mk: Remove.
2018-05-10 Martin Liska <mliska@suse.cz>
PR bootstrap/64914
* bootstrap-ubsan.mk: Define UBSAN_BOOTSTRAP.
2018-05-09 Joshua Watt <jpewhacker@gmail.com>
* ax_pthread.m4: Add file.
2018-05-08 Richard Biener <rguenther@suse.de>
PR bootstrap/85571
* bootstrap-lto-noplugin.mk: Disable compare.
* bootstrap-lto.mk: Supply contrib/compare-lto for do-compare.
2018-04-24 H.J. Lu <hongjiu.lu@intel.com>
PR bootstrap/85490
* bootstrap-cet.mk (STAGE4_CFLAGS): New.
2018-04-24 H.J. Lu <hongjiu.lu@intel.com>
PR target/85485
* bootstrap-cet.mk (STAGE2_CFLAGS): Remove -mcet.
(STAGE3_CFLAGS): Likewise.
2018-04-24 H.J. Lu <hongjiu.lu@intel.com>
PR target/85485
* cet.m4 (GCC_CET_FLAGS): Replace -mcet with -mshstk.
2018-04-19 Jakub Jelinek <jakub@redhat.com>
* cet.m4 (GCC_CET_FLAGS): Default to --disable-cet, replace
--enable-cet=default with --enable-cet=auto.
2018-04-18 David Malcolm <dmalcolm@redhat.com>
PR jit/85384
* acx.m4 (GCC_BASE_VER): Remove \$\$ from sed expression.
|
|
PR 22069
binutils/
* od-macho.c (dump_unwind_encoding_x86): Adjust for macro renaming.
cpu/ChangeLog
* or1kcommon.cpu (spr-reg-info): Typo fix.
include/ChangeLog
* mach-o/unwind.h (MACH_O_UNWIND_X86_64_RBP_FRAME_REGISTERS):
Rename from MACH_O_UNWIND_X86_64_RBP_FRAME_REGSITERS.
(MACH_O_UNWIND_X86_EBP_FRAME_REGISTERS): Rename from
MACH_O_UNWIND_X86_EBP_FRAME_REGSITERS.
opcodes/ChangeLog
* cr16-opc.c (cr16_instruction): Comment typo fix.
* hppa-dis.c (print_insn_hppa): Likewise.
sim/ppc/ChangeLog
* e500_registers.h: Comment typo fix.
* ppc-instructions (ppc_insn_mfcr): Likewise.
|
|
Following my recent transition from Imagination Technologies to the
reincarnated MIPS company update MAINTAINERS entries accordingly.
binutils/
* MAINTAINERS: Update my company e-mail address.
gdb/
* MAINTAINERS: Update my company e-mail address.
sim/
* MAINTAINERS: Update my company e-mail address.
|
|
insufficient arguments.
PR 22663
* maverick.c (DSPCDP4): Add missing parameter to debug print
statement.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files
|
|
This is the testsuite for the or1k sim, it tests running many of the
basic architecture instructions on the openrisc sim.
sim/testsuite/sim/or1k/ChangeLog:
2017-12-12 Peter Gavin <pgavin@gmail.com>
Stafford Horne <shorne@gmail.com>
* add.S: New file.
* alltests.exp: New file.
* and.S: New file.
* basic.S: New file.
* div.S: New file.
* ext.S: New file.
* find.S: New file.
* flag.S: New file.
* fpu.S: New file.
* jump.S: New file.
* load.S: New file.
* mac.S: New file.
* mfspr.S: New file.
* mul.S: New file.
* or.S: New file.
* or1k-asm-test-env.h: New file.
* or1k-asm-test-helpers.h: New file.
* or1k-asm-test.h: New file.
* or1k-asm.h: New file.
* or1k-test.ld: New file.
* ror.S: New file.
* shift.S: New file.
* spr-defs.h: New file.
* sub.S: New file.
* xor.S: New file.
sim/testsuite/ChangeLog:
2017-12-12 Stafford Horne <shorne@gmail.com>
Peter Gavin <pgavin@gmail.com>
* configure: Regenerated.
|
|
These are separted out to make the patch easier to read and smaller.
sim/ChangeLog:
2017-12-12 Stafford Horne <shorne@gmail.com>
Peter Gavin <pgavin@gmail.com>
* configure: Regenerated.
* or1k/aclocal.m4: Generated.
* or1k/config.in: Generated.
* or1k/configure: Generated.
|
|
These are the simulator files generated by cgen. These are split out
from the main sim patch to make the patch easier to review and smaller.
sim/ChangeLog:
2017-12-12 Stafford Horne <shorne@gmail.com>
Peter Gavin <pgavin@gmail.com>
* or1k/arch.c: Generated.
* or1k/arch.h: Generated.
* or1k/cpu.c: Generated.
* or1k/cpu.h: Generated.
* or1k/cpuall.h: Generated.
* or1k/decode.c: Generated.
* or1k/decode.h: Generated.
* or1k/model.c: Generated.
* or1k/sem-switch.c: Generated.
* or1k/sem.c: Generated.
|
|
This adds the OpenRISC 32-bit sim target. The OpenRISC sim is a CGEN
based sim so the bulk of the code is generated from the .cpu files by
CGEN. The engine decode and execute logic in mloop uses scache with
pseudo-basic-block extraction and supports both full and fast (switch)
modes.
The sim does not implement an mmu at the moment. The sim does implement
fpu instructions via the common sim-fpu implementation.
sim/ChangeLog:
2017-12-12 Stafford Horne <shorne@gmail.com>
Peter Gavin <pgavin@gmail.com>
* configure.tgt: Add or1k sim.
* or1k/README: New file.
* or1k/Makefile.in: New file.
* or1k/configure.ac: New file.
* or1k/mloop.in: New file.
* or1k/or1k-sim.h: New file.
* or1k/or1k.c: New file.
* or1k/sim-if.c: New file.
* or1k/sim-main.h: New file.
* or1k/traps.c: New file.
|
|
sim/common/ChangeLog:
2017-12-12 Peter Gavin <pgavin@gmail.com>
Stafford Horne <shorne@gmail.com>
* cgen-ops.h (MUL2OFSI): New function, 2's complement overflow
flag.
(MUL1OFSI): New function, 1's complement overflow flag.
|
|
* sim/common/ChangeLog:
2017-12-12 Peter Gavin <pgavin@gmail.com>
Stafford Horne <shorne@gmail.com>
* cgen-accfp.c (remsf, remdf): New function.
(cgen_init_accurate_fpu): Add remsf and remdf.
* cgen-fpu.h (cgen_fp_ops): Add remsf, remdf, remxf and remtf.
* sim-fpu.c (sim_fpu_rem): New function.
* sim-fpu.h (sim_fpu_status_invalid_irx): New enum.
(sim_fpu_rem): New function.
(sim_fpu_print_status): Add case for sim_fpu_status_invalid_irx.
|
|
FT32B is a new FT32 family member.
This patch adds support for the compressed instructions to gdb and sim.
gdb/ChangeLog:
* ft32-tdep.c (ft32_fetch_instruction): New function.
(ft32_analyze_prologue): Use ft32_fetch_instruction().
sim/ChangeLog:
* ft32/interp.c (step_once): Add ft32 shortcode decoder.
|
|
FT32B is a new FT32 family member. It has a code
compression scheme, which requires the use of linker
relaxations. The change is quite large, so submission
is in several parts.
Part 1 adds a 15-bit instruction field, and CPU-specific functions for
the code compression that are used in binutils and GDB.
bfd/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-ft32.c: Add HOWTO R_FT32_15.
* reloc.c: Add BFD_RELOC_FT32_15.
gas/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* config/tc-ft32.c (md_assemble): Replace FT32_FLD_K8 with
K15.
(md_apply_fix, tc_gen_reloc): Add BFD_RELOC_FT32_15.
include/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* elf/ft32.h: Add R_FT32_15.
* opcode/ft32.h: Replace FT32_FLD_K8 with K15.
(ft32_shortcode, sc_compar, ft32_split_shortcode,
ft32_merge_shortcode, ft32_merge_shortcode): New functions.
opcodes/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* opcodes/ft32-dis.c (print_insn_ft32): Replace FT32_FLD_K8 with K15.
* opcodes/ft32-opc.c (ft32_opc_info): Replace FT32_FLD_K8 with
K15. Add jmpix pattern.
sim/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* sim/ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.
|
|
sim/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* MAINTAINERS (ft32): Add myself.
|
|
sim/
* MAINTAINERS (aarch64): Update my email address.
|
|
This patch fixes the build failure by using disassembler to get
disassemble function pointer, and do the disassembly, because
print_insn_little_arm is no longer visible outside opcodes/
binutils-gdb/sim/arm/wrapper.c:98:10: error: implicit declaration of function 'print_insn_little_arm' [-Werror=implicit-function-declaration]
size = print_insn_little_arm (0, & info);
^
sim/arm:
2017-09-21 Yao Qi <yao.qi@linaro.org>
* wrapper.c (print_insn): Use disassembler instead of
print_insn_little_arm.
|
|
This matches the equivalent bits in bfd/acinclude.m4
sim/ChangeLog:
* configure.ac: Honor existing CC_FOR_BUILD in environment.
* configure: Regenerate.
sim/aarch64/ChangeLog:
* configure: Regenerate.
sim/arm/ChangeLog:
* configure: Regenerate.
sim/avr/ChangeLog:
* configure: Regenerate.
sim/bfin/ChangeLog:
* configure: Regenerate.
sim/common/ChangeLog:
* acinclude.m4 (SIM_AC_COMMON) Honor existing CC_FOR_BUILD in
environment.
sim/cr16/ChangeLog:
* configure: Regenerate.
sim/cris/ChangeLog:
* configure: Regenerate.
sim/d10v/ChangeLog:
* configure: Regenerate.
sim/erc32/ChangeLog:
* configure: Regenerate.
sim/frv/ChangeLog:
* configure: Regenerate.
sim/ft32/ChangeLog:
* configure: Regenerate.
sim/h8300/ChangeLog:
* configure: Regenerate.
sim/iq2000/ChangeLog:
* configure: Regenerate.
sim/lm32/ChangeLog:
* configure: Regenerate.
sim/m32c/ChangeLog:
* configure: Regenerate.
sim/m32r/ChangeLog:
* configure: Regenerate.
sim/m68hc11/ChangeLog:
* configure: Regenerate.
sim/mcore/ChangeLog:
* configure: Regenerate.
sim/microblaze/ChangeLog:
* configure: Regenerate.
sim/mips/ChangeLog:
* configure: Regenerate.
sim/mn10300/ChangeLog:
* configure: Regenerate.
sim/moxie/ChangeLog:
* configure: Regenerate.
sim/msp430/ChangeLog:
* configure: Regenerate.
sim/rl78/ChangeLog:
* configure: Regenerate.
sim/rx/ChangeLog:
* configure: Regenerate.
sim/sh/ChangeLog:
* configure: Regenerate.
sim/sh64/ChangeLog:
* configure: Regenerate.
sim/v850/ChangeLog:
* configure: Regenerate.
|
|
Previously this used the error function from GDB directly when linked
against GDB instead of the error method in the host callbacks
structure. This was exposed via a link error when GDB was converted
to C++. The error function invokes the error callback similar to
sim_io_error.
Note that there are also error functions in sim/ppc/main.c and
sim/ppc/misc.c. The ppc libsim.a expects each consumer to provide
several symbols used by the library including "error". sim-calls.c
provides these symbols when the library is linked into gdb. The dgen,
igen, tmp-filter, tmp-ld-decode, tmp-ld-cache, and tmp-ld-insn programs
use the functions from misc.c. psim uses the functions from main.c.
sim/ppc/ChangeLog:
PR sim/20863
* sim_calls.c (error): New function.
|