aboutsummaryrefslogtreecommitdiff
path: root/sim
AgeCommit message (Collapse)AuthorFilesLines
2019-09-23Add testsuite for the PRU simulator portDimitar Dimitrov14-0/+582
sim/testsuite/ChangeLog: * configure: Regenerate. sim/testsuite/sim/pru/ChangeLog: * add.s: New test. * allinsn.exp: New file. * dmem-zero-pass.s: New test. * dmem-zero-trap.s: New test. * dram.s: New test. * jmp.s: New test. * loop-imm.s: New test. * loop-reg.s: New test. * mul.s: New test. * subreg.s: New test. * testutils.inc: New file.
2019-09-23sim: Add PRU simulator portDimitar Dimitrov17-0/+17767
A simulator port for the TI PRU I/O processor. v1: https://sourceware.org/ml/gdb-patches/2016-12/msg00143.html v2: https://sourceware.org/ml/gdb-patches/2017-02/msg00397.html v3: https://sourceware.org/ml/gdb-patches/2017-02/msg00516.html v4: https://sourceware.org/ml/gdb-patches/2018-06/msg00484.html v5: https://sourceware.org/ml/gdb-patches/2019-08/msg00584.html v6: https://sourceware.org/ml/gdb-patches/2019-09/msg00036.html gdb/ChangeLog: * NEWS: Mention new simulator port for PRU. sim/ChangeLog: * MAINTAINERS: Add myself as PRU maintainer. * configure: Regenerated. * configure.tgt: Add PRU. sim/common/ChangeLog: * gennltvals.sh: Add PRU libgloss target. * nltvals.def: Regenerate from the latest libgloss sources. sim/pru/ChangeLog: * Makefile.in: New file. * aclocal.m4: Regenerated. * config.in: Regenerated. * configure: Regenerated. * configure.ac: New file. * interp.c: New file. * pru.h: New file. * pru.isa: New file. * sim-main.h: New file.
2019-09-20bfd macro conversion to inline functionsAlan Modra2-5/+4
This converts some of the macros that access struct bfd fields to inline functions. bfd/ * archive.c (bfd_generic_archive_p): Use bfd_set_thin_archive. * bfd-in.h (bfd_get_filename, bfd_get_cacheable, bfd_get_format), (bfd_get_target, bfd_get_flavour, bfd_family_coff, bfd_big_endian), (bfd_little_endian, bfd_header_big_endian, bfd_header_little_endian), (bfd_get_file_flags, bfd_applicable_file_flags), (bfd_applicable_section_flags, bfd_has_map, bfd_is_thin_archive), (bfd_valid_reloc_types, bfd_usrdata, bfd_get_start_address), (bfd_get_symcount, bfd_get_outsymbols, bfd_count_sections), (bfd_get_dynamic_symcount, bfd_get_symbol_leading_char): Delete. * bfd/bfd.c (bfd_get_filename, bfd_get_cacheable, bfd_get_format), (bfd_get_file_flags, bfd_get_start_address, bfd_get_symcount), (bfd_get_dynamic_symcount, bfd_get_outsymbols, bfd_count_sections), (bfd_has_map, bfd_is_thin_archive, bfd_set_thin_archive), (bfd_usrdata, bfd_set_usrdata): New inline functions. * targets.c (bfd_get_target, bfd_get_flavour), (bfd_applicable_file_flags, bfd_family_coff, bfd_big_endian), (bfd_little_endian, bfd_header_big_endian), (bfd_header_little_endian, bfd_applicable_section_flags), (bfd_get_symbol_leading_char): New inline functions. * bfd-in2.h: Regenerate. binutils/ * ar.c (write_archive): Use bfd_set_thin_archive. gdb/ * gdb_bfd.c (gdb_bfd_ref, gdb_bfd_unref): Use bfd_set_usrdata. * dwarf2read.c (dwarf2_read_gdb_index, dwarf2_read_debug_names), (read_indirect_string_from_dwz): Use bfd accessor. * dwarf2read.h (struct dwz_file <filename>): Likewise. * machoread.c (macho_symfile_read_all_oso): Likewise. * solib.c (solib_bfd_open): Likewise. ld/ * ldelf.c (ldelf_after_open, ldelf_place_orphan * ldlang.c (walk_wild_file, lang_process): Use bfd_usrdata. (load_symbols, ldlang_add_file): Use bfd_set_usrdata. * ldmain.c (add_archive_element): Use bfd_usrdata. * ldlang.h (bfd_input_just_syms): New inline function. * emultempl/aarch64elf.em (build_section_lists): Use it. * emultempl/mmo.em (mmo_place_orphan): Likewise. * emultempl/pe.em (gld_${EMULATION_NAME}_place_orphan): Likewise. * emultempl/pep.em (gld_${EMULATION_NAME}_place_orphan): Likewise. * emultempl/ppc64elf.em (build_section_lists): Likewise. sim/ * ppc/emul_generic.c (emul_add_tree_options): Delete old bfd code.
2019-09-19bfd_section_* macrosAlan Modra16-82/+87
This large patch removes the unnecessary bfd parameter from various bfd section macros and functions. The bfd is hardly ever used and if needed for the bfd_set_section_* or bfd_rename_section functions can be found via section->owner except for the com, und, abs, and ind std_section special sections. Those sections shouldn't be modified anyway. The patch also removes various bfd_get_section_<field> macros, replacing their use with bfd_section_<field>, and adds bfd_set_section_lma. I've also fixed a minor bug in gas where compressed section renaming was done directly rather than calling bfd_rename_section. This would have broken bfd_get_section_by_name and similar functions, but that hardly mattered at such a late stage in gas processing. bfd/ * bfd-in.h (bfd_get_section_name, bfd_get_section_vma), (bfd_get_section_lma, bfd_get_section_alignment), (bfd_get_section_size, bfd_get_section_flags), (bfd_get_section_userdata): Delete. (bfd_section_name, bfd_section_size, bfd_section_vma), (bfd_section_lma, bfd_section_alignment): Lose bfd parameter. (bfd_section_flags, bfd_section_userdata): New. (bfd_is_com_section): Rename parameter. * section.c (bfd_set_section_userdata, bfd_set_section_vma), (bfd_set_section_alignment, bfd_set_section_flags, bfd_rename_section), (bfd_set_section_size): Delete bfd parameter, rename section parameter. (bfd_set_section_lma): New. * bfd-in2.h: Regenerate. * mach-o.c (bfd_mach_o_init_section_from_mach_o): Delete bfd param, update callers. * aoutx.h, * bfd.c, * coff-alpha.c, * coff-arm.c, * coff-mips.c, * coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c, * compress.c, * ecoff.c, * elf-eh-frame.c, * elf-hppa.h, * elf-ifunc.c, * elf-m10200.c, * elf-m10300.c, * elf-properties.c, * elf-s390-common.c, * elf-vxworks.c, * elf.c, * elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-csky.c, * elf32-d10v.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c, * elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c, * elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc1x.c, * elf32-m68k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-nios2.c, * elf32-or1k.c, * elf32-ppc.c, * elf32-pru.c, * elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c, * elf32-score7.c, * elf32-sh.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-visium.c, * elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-bpf.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-sparc.c, * elf64-x86-64.c, * elflink.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c, * elfxx-aarch64.c, * elfxx-mips.c, * elfxx-sparc.c, * elfxx-tilegx.c, * elfxx-x86.c, * i386msdos.c, * linker.c, * mach-o.c, * mmo.c, * opncls.c, * pdp11.c, * pei-x86_64.c, * peicode.h, * reloc.c, * section.c, * syms.c, * vms-alpha.c, * xcofflink.c: Update throughout for bfd section macro and function changes. binutils/ * addr2line.c, * bucomm.c, * coffgrok.c, * dlltool.c, * nm.c, * objcopy.c, * objdump.c, * od-elf32_avr.c, * od-macho.c, * od-xcoff.c, * prdbg.c, * rdcoff.c, * rddbg.c, * rescoff.c, * resres.c, * size.c, * srconv.c, * strings.c, * windmc.c: Update throughout for bfd section macro and function changes. gas/ * as.c, * as.h, * dw2gencfi.c, * dwarf2dbg.c, * ecoff.c, * read.c, * stabs.c, * subsegs.c, * subsegs.h, * write.c, * config/obj-coff-seh.c, * config/obj-coff.c, * config/obj-ecoff.c, * config/obj-elf.c, * config/obj-macho.c, * config/obj-som.c, * config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c, * config/tc-arm.c, * config/tc-avr.c, * config/tc-bfin.c, * config/tc-bpf.c, * config/tc-d10v.c, * config/tc-d30v.c, * config/tc-epiphany.c, * config/tc-fr30.c, * config/tc-frv.c, * config/tc-h8300.c, * config/tc-hppa.c, * config/tc-i386.c, * config/tc-ia64.c, * config/tc-ip2k.c, * config/tc-iq2000.c, * config/tc-lm32.c, * config/tc-m32c.c, * config/tc-m32r.c, * config/tc-m68hc11.c, * config/tc-mep.c, * config/tc-microblaze.c, * config/tc-mips.c, * config/tc-mmix.c, * config/tc-mn10200.c, * config/tc-mn10300.c, * config/tc-msp430.c, * config/tc-mt.c, * config/tc-nds32.c, * config/tc-or1k.c, * config/tc-ppc.c, * config/tc-pru.c, * config/tc-rl78.c, * config/tc-rx.c, * config/tc-s12z.c, * config/tc-s390.c, * config/tc-score.c, * config/tc-score7.c, * config/tc-sh.c, * config/tc-sparc.c, * config/tc-spu.c, * config/tc-tic4x.c, * config/tc-tic54x.c, * config/tc-tic6x.c, * config/tc-tilegx.c, * config/tc-tilepro.c, * config/tc-v850.c, * config/tc-visium.c, * config/tc-wasm32.c, * config/tc-xc16x.c, * config/tc-xgate.c, * config/tc-xstormy16.c, * config/tc-xtensa.c, * config/tc-z8k.c: Update throughout for bfd section macro and function changes. * write.c (compress_debug): Use bfd_rename_section. gdb/ * aarch64-linux-tdep.c, * arm-tdep.c, * auto-load.c, * coff-pe-read.c, * coffread.c, * corelow.c, * dbxread.c, * dicos-tdep.c, * dwarf2-frame.c, * dwarf2read.c, * elfread.c, * exec.c, * fbsd-tdep.c, * gcore.c, * gdb_bfd.c, * gdb_bfd.h, * hppa-tdep.c, * i386-cygwin-tdep.c, * i386-fbsd-tdep.c, * i386-linux-tdep.c, * jit.c, * linux-tdep.c, * machoread.c, * maint.c, * mdebugread.c, * minidebug.c, * mips-linux-tdep.c, * mips-sde-tdep.c, * mips-tdep.c, * mipsread.c, * nto-tdep.c, * objfiles.c, * objfiles.h, * osabi.c, * ppc-linux-tdep.c, * ppc64-tdep.c, * record-btrace.c, * record-full.c, * remote.c, * rs6000-aix-tdep.c, * rs6000-tdep.c, * s390-linux-tdep.c, * s390-tdep.c, * solib-aix.c, * solib-dsbt.c, * solib-frv.c, * solib-spu.c, * solib-svr4.c, * solib-target.c, * spu-linux-nat.c, * spu-tdep.c, * symfile-mem.c, * symfile.c, * symmisc.c, * symtab.c, * target.c, * windows-nat.c, * xcoffread.c, * cli/cli-dump.c, * compile/compile-object-load.c, * mi/mi-interp.c: Update throughout for bfd section macro and function changes. * gcore (gcore_create_callback): Use bfd_set_section_lma. * spu-tdep.c (spu_overlay_new_objfile): Likewise. gprof/ * corefile.c, * symtab.c: Update throughout for bfd section macro and function changes. ld/ * ldcref.c, * ldctor.c, * ldelf.c, * ldlang.c, * pe-dll.c, * emultempl/aarch64elf.em, * emultempl/aix.em, * emultempl/armcoff.em, * emultempl/armelf.em, * emultempl/cr16elf.em, * emultempl/cskyelf.em, * emultempl/m68hc1xelf.em, * emultempl/m68kelf.em, * emultempl/mipself.em, * emultempl/mmix-elfnmmo.em, * emultempl/mmo.em, * emultempl/msp430.em, * emultempl/nios2elf.em, * emultempl/pe.em, * emultempl/pep.em, * emultempl/ppc64elf.em, * emultempl/xtensaelf.em: Update throughout for bfd section macro and function changes. libctf/ * ctf-open-bfd.c: Update throughout for bfd section macro changes. opcodes/ * arc-ext.c: Update throughout for bfd section macro changes. sim/ * common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c, * erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c, * m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c, * rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c, * rx/trace.c: Update throughout for bfd section macro changes.
2019-09-06bfd_get_filenameAlan Modra2-1/+5
This macro says: /* Cast from const char * to char * so that caller can assign to a char * without a warning. */ I reckon that isn't such a good idea since it can result in char* variables where const char* is appropriate. Not very many places need the char* cast. bfd/ * aout-target.h (object_p): Formatting. * bfd-in.h (bfd_get_filename): Don't cast to char*. * corefile.c (generic_core_file_matches_executable_p): Constify variables and remove cast. * bfd-in2.h: Regenerate. binutils/ * nm.c (print_object_filename_bsd, print_object_filename_sysv), (print_object_filename_posix, print_archive_filename_bsd), (print_archive_filename_sysv, print_archive_filename_posix), (print_archive_member_bsd, print_archive_member_sysv), (print_archive_member_posix): Constify parameter. (struct output_fns <print_object_filename, print_archive_filename>), (<print_archive_member>): Likewise. * objcopy.c (copy_archive): Add cast for make_tempdir. ld/ * emultempl/elf32.em (gld${EMULATION_NAME}_search_needed): Constify variable. * emultempl/pe.em (gld_${EMULATION_NAME}_after_open): Likewise. * emultempl/pep.em (gld_${EMULATION_NAME}_after_open): Likewise. gdb/ * coffread.c (coff_symfile_read): Constify filename variable. * dbxread.c (dbx_symfile_init, coffstab_build_psymtabs), (elfstab_build_psymtabs, stabsect_build_psymtabs): Likewise. * gdb_bfd.c (gdb_bfd_close_or_warn): Likewise. * solib.c (reload_shared_libraries_1): Likewise. * symfile.c (reread_symbols): Likewise. * solib-aix.c (solib_aix_bfd_open): Add cast for xfree of filename. * solib-darwin.c (darwin_bfd_open): Likewise. * symfile-mem.c (symbol_file_add_from_memory): Likewise. sim/cris/ * sim-if.c (sim_open): Constify filename variable.
2019-06-13sim/testsuite/or1k: Add tests for unordered comparesStafford Horne3-0/+202
Add tests for 32-bit and 64-bit unordered compare instructions. sim/testsuite/sim/or1k/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * fpu-unordered.S: New file. * fpu64a32-unordered.S: New file.
2019-06-13sim/testsuite/or1k: Add test case for l.adrp instructionStafford Horne2-0/+77
This is a simple test to ensure that the l.adrp instruction can be assembled and simulated correctly. sim/testsuite/sim/or1k/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * adrp.S: New file.
2019-06-13sim/testsuite/or1k: Add test for 64-bit fpu operationsStafford Horne2-0/+176
This is a very basic test but it ensure the machine is wired up correctly and that the assembler works. sim/testsuite/sim/or1k/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * fpu64a32.S: New file.
2019-06-13sim/common: wire up new unordered comparisonsStafford Horne3-0/+33
Define and wire up unordered floating point comparison operations for cgen targets. This patch depends on my posted cgen patches[0]. [0] https://www.sourceware.org/ml/cgen/2019-q2/msg00013.html sim/common/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * cgen-accfp.c (unorderedsf, unordereddf): New functions. (cgen_init_accurate_fpu): Wire up unorderedsf and unordereddf. * cgen-fpu.h (cgen_fp_ops): Define fields unorderedsf and unordereddf.
2019-06-13sim/common: Wire in df/di conversionStafford Horne2-0/+29
Up until now these have not been used in any CGEN targets, add them as they are now used by OpenRISC. sim/common/ChangeLog: * cgen-accfp.c (floatdidf, fixdfdi): New functions. (cgen_init_accurate_fpu): Add floatdidf and fixdfdi.
2019-06-13sim/or1k: Regenerate simStafford Horne11-179/+2988
This picks up changes for: - new orfpx64a32 spec - new unordered instructions - documentation and symbol updates sim/ChangeLog: * or1k/cpu.c: Regenerate. * or1k/cpu.h: Regenerate. * or1k/decode.c: Regenerate. * or1k/decode.h: Regenerate. * or1k/model.c: Regenerate. * or1k/sem-switch.c: Regenerate. * or1k/sem.c: Regenerate.
2019-04-13sim: Use host not target byte order for merging and splitting valuesAndrew Burgess2-5/+14
When using writes to memory through a struct to merge and extract multi-word value, it is the endianness of the host, not the target that affects which order the component words need to be written into the structure. Of the 5 functions adjusted here 4 of them are unused. The 5th, JOINSIDF will soon be used by the or1k target. For or1k, simulated on x86-64, this change fixes this function so that the correct bytes are now returned. sim/common/ChangeLog: * cgen-ops.h (SUBWORDXFSI): Compare HOST_BYTE_ORDER not CURRENT_TARGET_BYTE_ORDER. (SUBWORDTFSI): Likewise. (JOINSIDF): Likewise. (JOINSIXF): Likewise. (JOINSITF): Likewise.
2019-03-28sim: fix all sim buildsAndrew Burgess3-0/+8
This commit: commit ef9866970ce6683d40465fb7c3168f87a1dcd1b7 Date: Thu Mar 28 06:40:30 2019 +0900 sim/common: convert sim-arange to use sim-inline broke many simulator targets. I fixed aarch64 in a previous commit without realising how many other target were also broken. This commit adds the missing includes (sim-assert.h and libiberty.h), which seem to be needed by many simulator targets, in a central location, this should fix most builds. sim/common/ChangeLog: * sim-base.h: Add 'sim-assert.h' include. * sim-basics.h: Add 'libiberty.h' include.
2019-03-28sim: fix aarch64 sim buildAndrew Burgess3-0/+7
This commit: commit ef9866970ce6683d40465fb7c3168f87a1dcd1b7 Date: Thu Mar 28 06:40:30 2019 +0900 sim/common: convert sim-arange to use sim-inline Broke the simulator build for aarch64 - some required macros are no longer included where needed, fixed in this commit. sim/aarch64/ChangeLog: * cpustate.c: Add 'libiberty.h' include. * interp.c: Add 'sim-assert.h' include.
2019-03-28sim/common: Fix warnings: "warning: implicit declaration of function..."Stafford Horne7-0/+28
During building of several cgen simulator's I notices the below warnings. Adding includes fixes these. Including config.h allows stdio.h to properly configure itself to expose asprintf(). The other warnings for abort, free, memset, strlen are trivial. Warnings: ../../../binutils-gdb/sim/or1k/../common/sim-watch.c: In function ‘sim_watchpoint_install’: ../../../binutils-gdb/sim/or1k/../common/sim-watch.c:415:10: warning: implicit declaration of function ‘asprintf’; did you mean ‘vasprintf’? [-Wimplicit-function-declaration] if (asprintf (&name, "watch-%s-%s", ^~~~~~~~ vasprintf ../../../binutils-gdb/sim/lm32/../common/hw-device.c: In function ‘hw_strdup’: ../../../binutils-gdb/sim/lm32/../common/hw-device.c:59:34: warning: implicit declaration of function ‘strlen’ [-Wimplicit-function-declaration] char *dup = hw_zalloc (me, strlen (str) + 1); ^~~~~~ ../../../binutils-gdb/sim/lm32/../common/hw-events.c: In function ‘hw_event_queue_schedule’: ../../../binutils-gdb/sim/lm32/../common/hw-events.c:92:3: warning: implicit declaration of function ‘memset’ [-Wimplicit-function-declaration] memset (&dummy, 0, sizeof dummy); ^~~~~~ ../../../binutils-gdb/sim/lm32/../common/hw-handles.c: In function ‘hw_handle_remove_ihandle’: ../../../binutils-gdb/sim/lm32/../common/hw-handles.c:211:4: warning: implicit declaration of function ‘free’ [-Wimplicit-function-declaration] free (delete); ^~~~ ../../../binutils-gdb/sim/lm32/../common/sim-fpu.c: In function ‘pack_fpu’: ../../../binutils-gdb/sim/lm32/../common/sim-fpu.c:292:7: warning: implicit declaration of function ‘abort’ [-Wimplicit-function-declaration] abort (); ^~~~~ sim/common/ChangeLog: * sim-options.c: Include "config.h". Include <stdio.h>. * sim-watch.c: Include "config.h". Include <stdio.h>. * hw-device.c: Include <string.h>. * hw-events.c: Include <string.h>. * hw-handles.c: Include <stdlib.h>. * sim-fpu.c: Include <stdlib.h>.
2019-03-28sim/common: convert sim-arange to use sim-inlineStafford Horne8-36/+83
This fixes a TODO item and also fixes an error which we get when building with no optimizations (-O0) in at least gcc 8.2.1. Tested with sims that use cgen code lm32, or1k, cris, m32r and inlining is working corretly. Reference Error: gcc -DHAVE_CONFIG_H -DWITH_DEFAULT_MODEL='"or1200"' -DWITH_ALIGNMENT=STRICT_ALIGNMENT \ -DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31 -DWITH_TARGET_ADDRESS_BITSIZE=32 \ -DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG -DDEFAULT_INLINE=0 -DWITH_SCACHE=16384 \ -I. -I../../../binutils-gdb/sim/or1k -I../common -I../../../binutils-gdb/sim/or1k/../common \ -I../../include -I../../../binutils-gdb/sim/or1k/../../include -I../../bfd \ -I../../../binutils-gdb/sim/or1k/../../bfd -I../../opcodes -I../../../binutils-gdb/sim/or1k/../../opcodes \ -g -o run nrun.o libsim.a ../../bfd/libbfd.a ../../opcodes/libopcodes.a ../../libiberty/libiberty.a \ -ldl -lz -lm /usr/bin/ld: libsim.a(mloop.o): in function `extract': /home/shorne/work/openrisc/gdb-musl/sim/or1k/mloop.c:82: undefined reference to `sim_addr_range_hit_p' /usr/bin/ld: /home/shorne/work/openrisc/gdb-musl/sim/or1k/mloop.c:83: undefined reference to `sim_addr_range_hit_p' collect2: error: ld returned 1 exit status make[3]: *** [Makefile:305: run] Error 1 sim/common/ChangeLog: * Make-common.in (sim-arange_h): Remove sim-arange.c * sim-arange.c: Remove SIM_ARANGE_C. Add ifdef for _SIM_ARANGE_C_. Include "sim-arange.h". Remove include for unused "sim-assert.h". Remove DEFINE_INLINE_P. Remove DEFINE_NON_INLINE_P. (sim_addr_range_add): Declare as INLINE_SIM_ARANGE. (sim_addr_range_delete): Declare as INLINE_SIM_ARANGE. (sim_addr_range_hit_p): Change from SIM_ARANGE_INLINE to INLINE_SIM_ARANGE. * sim-arange.h (sim_addr_range_add): Declare as INLINE_SIM_ARANGE. (sim_addr_range_delete): Declare as INLINE_SIM_ARANGE. (sim_addr_range_hit_p) Declare as INLINE_SIM_ARANGE. Remove definition of SIM_ARANGE_INLINE. Remove [HAVE_INLINE]. Wrap include "sim-arange.c" in H_REVEALS_MODULE_P. * sim-base.h: Include "sim-arange.h" * sim-basics.h: Remove include of "sim-arange.h" * sim-inline.c: Include "sim-arange.c" * sim-inline.h: Define INLINE_SIM_ARANGE. Define SIM_ARANGE_INLINE. Define EXTERN_SIM_ARANGE_P. Define STATIC_INLINE_SIM_ARANGE. Define STATIC_SIM_ARANGE.
2019-02-28(gdb/sim) Move Mike Frysinger to past maintainers sectionJoel Brobecker2-1/+5
sim/ChangeLog: * MAINTAINERS: Move Mike Frysinger to past maintainers' section.
2019-02-13Add Andrew Burgess as global maintainer of gdb/ and sim/Simon Marchi2-1/+6
2019-01-26Fix the sim buildTom Tromey5-4/+51
Simon pointed out that the "common/" include change in gdb broke the sim build. The problem was that the sim was using gdb's create-version.sh, which changed. This patch copies create-version.sh to the sim, so that it can generate "version.c" in a way that works in the sim build. Tested by rebuilding. sim/common/ChangeLog 2019-01-26 Tom Tromey <tom@tromey.com> * Make-common.in (version.c): Use sim's create-version.sh. * create-version.sh: New file. sim/ppc/ChangeLog 2019-01-26 Tom Tromey <tom@tromey.com> * Makefile.in (version.c): Use sim's create-version.sh.
2019-01-16Actually remove definitions of DEFINE_NON_INLINE_P and DEFINE_INLINE_PSimon Marchi2-4/+1
I applied the patch "Do not expand macros to 'defined'" by hand because I couldn't apply it with git-am, and of course forgot to remove the macro definitions. This patch fixes it, and also makes the ChangeLog entry a bit cleaner.
2019-01-16Do not expand macros to 'defined'Pavel I. Kryukov2-5/+7
Expanding a macro which contains 'defined' PP keyword is UB. It causes a compilation failure when -Wexpansion-to-defined is used. sim/common/Changelog: 2019-01-16 Pavel I. Kryukov <kryukov@frtk.ru> * sim-arange.c: eliminate DEFINE_NON_INLINE_P
2019-01-15sim: Fix definition of SIM_ARANGE_INLINESimon Marchi2-1/+5
If HAVE_INLINE is false, SIM_ARANGE_INLINE is currently defined as #define SIM_ARANGE_INLINE EXTERN However, EXTERN is not defined anywhere, leading to errors such as: In file included from /mipt-mips/simulator/../../sim/common/sim-basics.h:147:0, from /mipt-mips/simulator/export/gdb/sim-main.h:13, from /mipt-mips/simulator/export/gdb/gdb_interface.cpp:7: /mipt-mips/simulator/../../sim/common/sim-arange.h:71:27: error: ‘EXTERN’ does not name a type; did you mean ‘EUSERS’? #define SIM_ARANGE_INLINE EXTERN ^ /mipt-mips/simulator/../../sim/common/sim-arange.h:76:1: note: in expansion of macro ‘SIM_ARANGE_INLINE’ SIM_ARANGE_INLINE int ^~~~~~~~~~~~~~~~~ I (Simon) have reproduced the problem by simply removing the HAVE_INLINE definition. This was originally reported by Pavel I. Kryukov <kryukov@frtk.ru>. sim/common/ChangeLog: * sim-arange.h (SIM_ARANGE_INLINE): Change EXTERN to extern.
2019-01-03Add 'extern C' if simulator is written in C++Павел Крюков2-0/+12
sim/common/Changelog: 2018-12-31 Pavel I. Kryukov <kryukov@frtk.ru> * sim-base.h: Add 'extern C' if header is compiled with C++
2019-01-01Update copyright year range in all GDB files.Joel Brobecker618-618/+618
This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files.
2018-12-18sim: Don't overwrite stored errno in sim_syscall_multiAndrew Burgess2-5/+5
The host syscall callback mechanism should take care of updating the errcode within the CB_SYSCALL struct, and we should not be adjusting the error code once the syscall has completed. We especially, should not be rewriting the syscall errcode based on the value of errno some time after running the host syscall, as there is no guarantee that errno has not be overwritten. To perform a syscall we call cb_syscall (in syscall.c). To return from cb_syscall control passes through one of two exit paths these are labeled FinishSyscall and ErrorFinish and are reached using goto statements scattered throughout the cb_syscall function. In FinishSyscall we store the syscall result in 'sc->result', and the error code is transated to target encoding, and stored in 'sc->errcode'. In ErrorFinish, we again store the syscall result in 'sc->result', and fill in 'sc->errcode' by fetching the actual errno from the host with the 'cb->get_errno' callback. In both cases 'sc->errcode' will have been filled in with an appropriate value. Further, if we look at a specific syscall example, CB_SYS_open, in this case the first thing we do is fetch the path to open from the target with 'get_path', if this fails then the errcode is returned, and we jump to FinishSyscall. Notice that in this case, no host syscall may have been performed, for example a failure to read the path to open out of simulated memory can return EINVAL without performing any host syscall. Given that no host syscall has been performed, reading the host errno makes absolutely no sense. This commit removes from sim_syscall_multi the rewriting of sc->errcode based on the value of errno, and instead relies on the value stored in the cb_syscall. sim/common/ChangeLog: * sim-syscall.c (sim_syscall_multi): Don't update sc->errcode at this point, it should have already been set in cb_syscall.
2018-12-06sim/cris: Fix references to cgen cpu directoryAndrew Burgess2-10/+13
Don't assume that cgen is located within the binutils-gdb tree. We already have CGEN_CPU_DIR and CPU_DIR defined, these are the cpu/ directory within cgen, and the cpu/ directory within binutils-cpu. The cris target tries to find CPU_DIR relative to the cgen source tree, which can be wrong when building with an out of tree cgen. sim/cris/ChangeLog: * Makefile.in: Replace uses of CGEN_CPU_DIR with CPU_DIR, and remove the definition of CGEN_CPU_DIR.
2018-12-06sim/opcodes: Allow use of out of tree cgen source directoryAndrew Burgess9-40/+100
When configuring with '--enbale-cgen-maint' the default for both the opcodes/ and sim/ directories is to assume that the cgen source is within the binutils-gdb source tree as binutils-gdb/cgen/. In the old cvs days, this worked well, as cgen was just another sub-module of the single cvs repository and could easily be checked out within the binutils-gdb directory, and managed by cvs in the normal way. Now that binutils-gdb is in git, while cgen is still in cvs, placing the cgen respository within the binutils-gdb tree is more troublesome, and it would be nice if the two tools could be kept separate. Luckily there is already some initial code in the configure.ac files for both opcodes/ and sim/ to support having cgen be located outside of the binutils-gdb tree, however, this was speculative code written imagining a future where cgen would be built and installed to some location. Right now there is no install support for cgen, and so the configure code in opcodes/ and sim/ doesn't really do anything useful. In this commit I repurpose this code to allow binutils-gdb to be configured so that it can make use of a cgen source directory that is outside of the binutils-gdb tree. With this commit applied it is now possible to configure and build binutils-gdb like this: /path/to/binutils-gdb/src/configure --enable-cgen-maint=/path/to/cgen/src/cgen/ make all-opcodes make -C opcodes run-cgen-all Just in case anyone is still using cgen inside the binutils-gdb tree, I have left the default behaviour of '--enable-cgen-maint' (with no parameter) unchanged, that is it looks for the cgen directory as 'binutils-gdb/cgen/'. opcodes/ChangeLog: * configure.ac (enable-cgen-maint): Support passing path to cgen source tree. * configure: Regenerate. sim/ChangeLog: * common/acinclude.m4 (enable-cgen-maint): Support passing path to cgen source tree. * cris/configure: Regenerate. * frv/configure: Regenerate. * iq2000/configure: Regenerate. * lm32/configure: Regenerate. * m32r/configure: Regenerate. * or1k/configure: Regenerate. * sh64/configure: Regenerate.
2018-10-30[src/erc32] Use ncurses instead of termcap on Cygwin tooJoel Sherrill3-10/+15
This removes a Cygwin-specific libtermcap hack that was dependent on the presence of one of the multiple alternative libraries. The one it was hard-coded to pick isn't included with Cygwin anymore. According to Corinna, libtermcap was removed from Cygwin a long time ago, and libncurses is used in Cygwin for a long time too. The fix is to make Cygwin use the same autoconf code to figure out the correct lib as any other target. sim/erc32/Changelog: 2018-10-30 Joel Sherrill <joel@rtems.org> * configure.ac: Remove the Cygwin-specific libtermcap.a hack and use the standard logic to determine which library to use. * configure: Regenerate.
2018-10-05or1k: Add the l.muld, l.muldu, l.macu, l.msbu insnsRichard Henderson12-233/+1058
Also fix the incorrect definitions of multiply and divide carry and overflow float. Changes to the instructions are made in the .cpu file, then we regenerate the binutils and sim files. The changes also required a few fixups for tests and additional sim helpers. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1korbis.cpu (insn-opcode-mac): Add opcodes for MACU and MSBU. (insn-opcode-alu-regreg): Add opcodes for MULD and MULDU. (l-mul): Fix overflow support and indentation. (l-mulu): Fix overflow support and indentation. (l-muld, l-muldu, l-msbu, l-macu): New instructions. (l-div); Remove incorrect carry behavior. (l-divu): Fix carry and overflow behavior. (l-mac): Add overflow support. (l-msb, l-msbu): Add carry and overflow support. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1k-desc.c: Regenerate. * or1k-desc.h: Regenerate. * or1k-opc.c: Regenerate. * or1k-opc.h: Regenerate. * or1k-opinst.c: Regenerate. sim/common/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * cgen-ops.h (ADDCFDI): New function, add carry flag DI variant. (ADDOFDI): New function, add overflow flag DI variant. (SUBCFDI): New function, subtract carry flag DI variant. (SUBOFDI): New function, subtract overflow flag DI variant. sim/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * or1k/cpu.h: Regenerate. * or1k/decode.c: Regenerate. * or1k/decode.h: Regenerate. * or1k/model.c: Regenerate. * or1k/sem-switch.c: Regenerate. * or1k/sem.c: Regenerate: sim/testsuite/sim/or1k/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * div.S: Fix tests to match correct overflow/carry semantics. * mul.S: Likewise. gas/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * testsuite/gas/or1k/allinsn.s: Add instruction tests for l.muld, l.muldu, l.macu, l.msb, l.msbu. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions.
2018-09-28Change "xor" name in cpu_core to allow building with iso646.h or C++ compilerКомпан, Вячеслав Олегович3-4/+14
This code was introduced back in 1998, and C99 appeared next year, defining the `xor` as an 'alternative keyword' if iso646.h is included. Moreover, C++98 defines it on the language level. As a result, the code is not buildable with C++ compiler or if iso646.h is included beforehand. According to comment, `sim_cpu_core` is mostly a clone of `sim_core`, so I renamed it to `byte_xor` as it's called in `sim_core`. sim/common/ChangeLog: * sim-core.h (sim_cpu_core): Rename cpu_core.xor to cpu_core.byte_xor. * sim-core.c (sim_core_set_xor): Likewise. (sim_core_xor_read_buffer): Likewise. (sim_core_xor_write_buffer): Likewise.
2018-07-21Update my e-mail address, limit maintenance to MIPS I-IV ISAsMaciej W. Rozycki2-1/+6
binutils/ * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV ISA maintenance. gdb/ * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV ISA maintenance. sim/ * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV ISA maintenance.
2018-07-19Remove myself from target-specific MAINTAINERSDJ Delorie2-4/+8
[binutils] * MAINTAINERS (RL78, RX): Remove myself as maintainer. [sim] * MAINTAINERS (rl78, m32c, rx, v850): Remove myself as maintainer.
2018-07-14sim: Add Stafford Horne as or1k maintainer.Stafford Horne2-0/+5
Since I helped upstream the or1k port I would like to claim myself as maintainer. sim/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * MAINTAINERS (or1k): Add myself as or1k maintainer. Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-06-19Bump to autoconf 2.69 and automake 1.15.1Simon Marchi132-17835/+19994
When trying to run the update-gnulib.sh script in gdb, I get this: Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1. Aborting. Apparently, it's an issue with a regex in automake that triggers a warning starting with Perl 5.22. It has been fixed in automake 1.15.1. So I think it's a good excuse to bump the versions of autoconf and automake used in the gnulib import. And to avoid requiring multiple builds of autoconf/automake, it was suggested that we bump the required version of those tools for all binutils-gdb. For autoconf, the 2.69 version is universally available, so it's an easy choice. For automake, different distros and distro versions have different automake versions. But 1.15.1 seems to be the most readily available as a package. In any case, it's easy to build it from source. I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ, because I don't think they are useful in our case. They only specify a lower bound for the acceptable version of automake/autoconf. That's useful if you let the user choose the version of the tool they want to use, but want to set a minimum version (because you use a feature that was introduced in that version). In our case, we force people to use a specific version anyway. For the autoconf version, we have the check in config/override.m4 that enforces the version we want. It will be one less thing to update next time we change autotools version. I hit a few categories of problems that required some changes. They are described below along with the chosen solutions. Problem 1: configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation Solution 1: Adjust the code based on the example at that URL. Problem 2 (in zlib/): Makefile.am: error: required file './INSTALL' not found Makefile.am: 'automake --add-missing' can install 'INSTALL' Makefile.am: error: required file './NEWS' not found Makefile.am: error: required file './AUTHORS' not found Makefile.am: error: required file './COPYING' not found Makefile.am: 'automake --add-missing' can install 'COPYING' Solution 2: Add the foreign option to AUTOMAKE_OPTIONS. Problem 3: doc/Makefile.am:20: error: support for Cygnus-style trees has been removed Solution 3: Remove the cygnus options. Problem 4: Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') Solution 4: Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is already defined earlier). Problem 5: doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 5: Rename .texinfo files to .texi. Problem 6: doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 6: Remove the hack at the bottom of doc/Makefile.am and use the info-in-builddir automake option. Problem 7: doc/Makefile.am:35: error: required file '../texinfo.tex' not found doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex' Solution 7: Use the no-texinfo.tex automake option. We also have one in texinfo/texinfo.tex, not sure if we should point to that, or move it (or a newer version of it added with automake --add-missing) to top-level. Problem 8: Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory, Makefile.am:131: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. Solution 8: Use subdir-objects, that means adjusting references to some .o that will now be in config/. Problem 9: configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... ../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from... ../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from... ../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from... ../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from... configure.ac:375: the top level Solution 9: Use AC_LANG_SOURCE, or use proper quoting. Problem 10 (in intl/): configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS /usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from... /usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from... /usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from... /usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from... /usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from... /usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from... /usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from... configure.ac:7: the top level Solution 10: Add AC_USE_SYSTEM_EXTENSIONS in configure.ac. ChangeLog: * libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * README-maintainer-mode: Update version requirements. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. bfd/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. (INCLUDES): Rename to ... (AM_CPPFLAGS): ... this. * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add info-in-builddir no-texinfo.tex. (info_TEXINFOS): Rename bfd.texinfo to bfd.texi. * doc/bfd.texinfo: Rename to ... * doc/bfd.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. binutils/ChangeLog: * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add info-in-builddir no-texinfo.tex. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. config/ChangeLog: * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. etc/ChangeLog: * configure.in: Remove AC_PREREQ. * configure: Re-generate. gas/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects. (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix. * configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles, extra_objects): Add config/ prefix. * doc/as.texinfo: Rename to... * doc/as.texi: ... this. * doc/Makefile.am: Rename as.texinfo to as.texi throughout. Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gdb/ChangeLog: * common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION, PACKAGE_STRING, PACKAGE_TARNAME): Undefine. * configure.ac: Remove AC_PREREQ, add missing quoting. * gnulib/configure.ac: Modernize usage of AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ. * gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69. (AUTOMAKE_VERSION): Bump to 1.15.1. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. * gnulib/aclocal.m4: Re-generate. * gnulib/config.in: Re-generate. * gnulib/configure: Re-generate. * gnulib/import/Makefile.in: Re-generate. gdb/gdbserver/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. gdb/testsuite/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. gold/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting and usage of AC_LANG_SOURCE. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * testsuite/Makefile.in: Re-generate. gprof/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * gconfig.in: Re-generate. intl/ChangeLog: * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. ld/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. (AUTOMAKE_OPTIONS): Add info-in-builddir. * README: Rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. * gen-doc.texi: Likewise. * h8-doc.texi: Likewise. * ld.texinfo: Rename to ... * ld.texi: ... this. * ldint.texinfo: Rename to ... * ldint.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. libdecnumber/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libiberty/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. opcodes/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. * configure.ac: Remove AC_PREREQ. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. readline/ChangeLog.gdb: * configure: Re-generate. * examples/rlfe/configure: Re-generate. sim/ChangeLog: * All configure.ac: Remove AC_PREREQ. * All configure: Re-generate. zlib/ChangeLog.bin-gdb: * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate.
2018-06-18config: Sync with GCCSimon Marchi32-974/+1037
... and re-generate all possible configure files, since they may depend on things in config/. config/ChangeLog: Sync with GCC 2018-06-08 Martin Liska <mliska@suse.cz> * bootstrap-mpx.mk: Remove. 2018-05-10 Martin Liska <mliska@suse.cz> PR bootstrap/64914 * bootstrap-ubsan.mk: Define UBSAN_BOOTSTRAP. 2018-05-09 Joshua Watt <jpewhacker@gmail.com> * ax_pthread.m4: Add file. 2018-05-08 Richard Biener <rguenther@suse.de> PR bootstrap/85571 * bootstrap-lto-noplugin.mk: Disable compare. * bootstrap-lto.mk: Supply contrib/compare-lto for do-compare. 2018-04-24 H.J. Lu <hongjiu.lu@intel.com> PR bootstrap/85490 * bootstrap-cet.mk (STAGE4_CFLAGS): New. 2018-04-24 H.J. Lu <hongjiu.lu@intel.com> PR target/85485 * bootstrap-cet.mk (STAGE2_CFLAGS): Remove -mcet. (STAGE3_CFLAGS): Likewise. 2018-04-24 H.J. Lu <hongjiu.lu@intel.com> PR target/85485 * cet.m4 (GCC_CET_FLAGS): Replace -mcet with -mshstk. 2018-04-19 Jakub Jelinek <jakub@redhat.com> * cet.m4 (GCC_CET_FLAGS): Default to --disable-cet, replace --enable-cet=default with --enable-cet=auto. 2018-04-18 David Malcolm <dmalcolm@redhat.com> PR jit/85384 * acx.m4 (GCC_BASE_VER): Remove \$\$ from sed expression.
2018-05-09PR22069, Several instances of register accidentally spelled as regsiterAlan Modra3-2/+7
PR 22069 binutils/ * od-macho.c (dump_unwind_encoding_x86): Adjust for macro renaming. cpu/ChangeLog * or1kcommon.cpu (spr-reg-info): Typo fix. include/ChangeLog * mach-o/unwind.h (MACH_O_UNWIND_X86_64_RBP_FRAME_REGISTERS): Rename from MACH_O_UNWIND_X86_64_RBP_FRAME_REGSITERS. (MACH_O_UNWIND_X86_EBP_FRAME_REGISTERS): Rename from MACH_O_UNWIND_X86_EBP_FRAME_REGSITERS. opcodes/ChangeLog * cr16-opc.c (cr16_instruction): Comment typo fix. * hppa-dis.c (print_insn_hppa): Likewise. sim/ppc/ChangeLog * e500_registers.h: Comment typo fix. * ppc-instructions (ppc_insn_mfcr): Likewise.
2018-01-22MAINTAINERS: Update my company e-mail addressMaciej W. Rozycki2-1/+5
Following my recent transition from Imagination Technologies to the reincarnated MIPS company update MAINTAINERS entries accordingly. binutils/ * MAINTAINERS: Update my company e-mail address. gdb/ * MAINTAINERS: Update my company e-mail address. sim/ * MAINTAINERS: Update my company e-mail address.
2018-01-02Fix compile time warning (in the ARM simulator) about a print statement with ↵Nick Clifton2-1/+7
insufficient arguments. PR 22663 * maverick.c (DSPCDP4): Add missing parameter to debug print statement.
2018-01-02Update copyright year range in all GDB filesJoel Brobecker618-618/+618
gdb/ChangeLog: Update copyright year range in all GDB files
2017-12-12sim: testsuite: add testsuite for or1k simPeter Gavin28-0/+6510
This is the testsuite for the or1k sim, it tests running many of the basic architecture instructions on the openrisc sim. sim/testsuite/sim/or1k/ChangeLog: 2017-12-12 Peter Gavin <pgavin@gmail.com> Stafford Horne <shorne@gmail.com> * add.S: New file. * alltests.exp: New file. * and.S: New file. * basic.S: New file. * div.S: New file. * ext.S: New file. * find.S: New file. * flag.S: New file. * fpu.S: New file. * jump.S: New file. * load.S: New file. * mac.S: New file. * mfspr.S: New file. * mul.S: New file. * or.S: New file. * or1k-asm-test-env.h: New file. * or1k-asm-test-helpers.h: New file. * or1k-asm-test.h: New file. * or1k-asm.h: New file. * or1k-test.ld: New file. * ror.S: New file. * shift.S: New file. * spr-defs.h: New file. * sub.S: New file. * xor.S: New file. sim/testsuite/ChangeLog: 2017-12-12 Stafford Horne <shorne@gmail.com> Peter Gavin <pgavin@gmail.com> * configure: Regenerated.
2017-12-12sim: or1k: add autoconf generated filesStafford Horne5-0/+16427
These are separted out to make the patch easier to read and smaller. sim/ChangeLog: 2017-12-12 Stafford Horne <shorne@gmail.com> Peter Gavin <pgavin@gmail.com> * configure: Regenerated. * or1k/aclocal.m4: Generated. * or1k/config.in: Generated. * or1k/configure: Generated.
2017-12-12sim: or1k: add cgen generated filesStafford Horne11-0/+27536
These are the simulator files generated by cgen. These are split out from the main sim patch to make the patch easier to review and smaller. sim/ChangeLog: 2017-12-12 Stafford Horne <shorne@gmail.com> Peter Gavin <pgavin@gmail.com> * or1k/arch.c: Generated. * or1k/arch.h: Generated. * or1k/cpu.c: Generated. * or1k/cpu.h: Generated. * or1k/cpuall.h: Generated. * or1k/decode.c: Generated. * or1k/decode.h: Generated. * or1k/model.c: Generated. * or1k/sem-switch.c: Generated. * or1k/sem.c: Generated.
2017-12-12sim: or1k: add or1k target to simStafford Horne11-0/+1637
This adds the OpenRISC 32-bit sim target. The OpenRISC sim is a CGEN based sim so the bulk of the code is generated from the .cpu files by CGEN. The engine decode and execute logic in mloop uses scache with pseudo-basic-block extraction and supports both full and fast (switch) modes. The sim does not implement an mmu at the moment. The sim does implement fpu instructions via the common sim-fpu implementation. sim/ChangeLog: 2017-12-12 Stafford Horne <shorne@gmail.com> Peter Gavin <pgavin@gmail.com> * configure.tgt: Add or1k sim. * or1k/README: New file. * or1k/Makefile.in: New file. * or1k/configure.ac: New file. * or1k/mloop.in: New file. * or1k/or1k-sim.h: New file. * or1k/or1k.c: New file. * or1k/sim-if.c: New file. * or1k/sim-main.h: New file. * or1k/traps.c: New file.
2017-12-12sim: cgen: add MUL2OFSI and MUL1OFSI functions (needed for OR1K l.mul[u])Peter Gavin2-0/+25
sim/common/ChangeLog: 2017-12-12 Peter Gavin <pgavin@gmail.com> Stafford Horne <shorne@gmail.com> * cgen-ops.h (MUL2OFSI): New function, 2's complement overflow flag. (MUL1OFSI): New function, 1's complement overflow flag.
2017-12-12sim: cgen: add remainder functions (needed for OR1K lf.rem.[sd])Peter Gavin5-5/+149
* sim/common/ChangeLog: 2017-12-12 Peter Gavin <pgavin@gmail.com> Stafford Horne <shorne@gmail.com> * cgen-accfp.c (remsf, remdf): New function. (cgen_init_accurate_fpu): Add remsf and remdf. * cgen-fpu.h (cgen_fp_ops): Add remsf, remdf, remxf and remtf. * sim-fpu.c (sim_fpu_rem): New function. * sim-fpu.h (sim_fpu_status_invalid_irx): New enum. (sim_fpu_rem): New function. (sim_fpu_print_status): Add case for sim_fpu_status_invalid_irx.
2017-11-01FT32: support for FT32B processor - part 2/2James Bowman2-7/+19
FT32B is a new FT32 family member. This patch adds support for the compressed instructions to gdb and sim. gdb/ChangeLog: * ft32-tdep.c (ft32_fetch_instruction): New function. (ft32_analyze_prologue): Use ft32_fetch_instruction(). sim/ChangeLog: * ft32/interp.c (step_once): Add ft32 shortcode decoder.
2017-10-12FT32: support for FT32B processor - part 1James Bowman2-7/+15
FT32B is a new FT32 family member. It has a code compression scheme, which requires the use of linker relaxations. The change is quite large, so submission is in several parts. Part 1 adds a 15-bit instruction field, and CPU-specific functions for the code compression that are used in binutils and GDB. bfd/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elf32-ft32.c: Add HOWTO R_FT32_15. * reloc.c: Add BFD_RELOC_FT32_15. gas/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * config/tc-ft32.c (md_assemble): Replace FT32_FLD_K8 with K15. (md_apply_fix, tc_gen_reloc): Add BFD_RELOC_FT32_15. include/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * elf/ft32.h: Add R_FT32_15. * opcode/ft32.h: Replace FT32_FLD_K8 with K15. (ft32_shortcode, sc_compar, ft32_split_shortcode, ft32_merge_shortcode, ft32_merge_shortcode): New functions. opcodes/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * opcodes/ft32-dis.c (print_insn_ft32): Replace FT32_FLD_K8 with K15. * opcodes/ft32-opc.c (ft32_opc_info): Replace FT32_FLD_K8 with K15. Add jmpix pattern. sim/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * sim/ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.
2017-10-12Add myself as ft32 maintainer for sim.James Bowman2-0/+5
sim/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * MAINTAINERS (ft32): Add myself.
2017-10-03Update my email address.Jim Wilson2-1/+5
sim/ * MAINTAINERS (aarch64): Update my email address.
2017-09-21[SIM, ARM] Fix build failureYao Qi2-1/+8
This patch fixes the build failure by using disassembler to get disassemble function pointer, and do the disassembly, because print_insn_little_arm is no longer visible outside opcodes/ binutils-gdb/sim/arm/wrapper.c:98:10: error: implicit declaration of function 'print_insn_little_arm' [-Werror=implicit-function-declaration] size = print_insn_little_arm (0, & info); ^ sim/arm: 2017-09-21 Yao Qi <yao.qi@linaro.org> * wrapper.c (print_insn): Use disassembler instead of print_insn_little_arm.
generated by cgit v1.1 at 2024-11-21 15:08:42 +0000