| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
No arch is using this anymore, and we want all new ports using the
hardware framework instead. Punt WITH_DEVICES and the two callbacks
device_io_{read,write}_buffer.
We can also punt the tconfig.h file as no port is using it anymore.
This fixes in-tree builds that get confused by picking up the wrong
one (common/ vs <port>/) caused by commit ae7d0cac8ce971f7108d270c.
Any port that needs to set up a global define can use their own
sim-main.h file that they must provide regardless.
|
|
The bfin port is using the WITH_DEVICES framework for two reasons:
- get access to the cpu making the request (if available)
- check the alignment & size for core & system MMRs
We addressed the first part with commit dea10706e9159ba6e94eab4c25010f3,
and we handle the second part with this commit. Arguably this is more
correct too because trying to do bad reads/writes directly (when devices
support is disabled) often results in bad memory accesses.
As part of this clean up, we also adjust all of the existing logic that
would reject invalid accesses: the code was relying on the checks never
returning, but that's not the case when things like gdb (via the user's
commands) are making the requests. Thus we'd still end up with bad mem
accesses, or sometimes gdb being hung due to while(1) loops.
Now we can connect (most of) these models into any address and have them
work correctly.
|
|
We set up an array of 3 elements and then index into it with a 2bit
value. We check the range before we actually use the pointer, but
the indexing is enough to make asan upset, so just stuff a fourth
value in there to keep things simple.
|
|
The bfin port has been using the device callback largely so it could be
passed the cpu when available. Add this logic to the common core code
so all ports get access to the active cpu.
The semantics of these buffer functions are changed slightly in that
errors halt the engine synchronously rather than returning the length
to the caller. We'll probably adjust this in a follow up commit.
The bfin code isn't updated just yet as it has a bit more logic in the
device layer that needs to be unwound at which point we can delete it
entirely.
|
|
The only unique thing about mip's sim_{read,write} helpers is the call to
address_translation on the incoming address. When we look closer at that
function though, we see it's just a stub that maps physical to virtual,
and the cache/return values are hardcoded. If we delete this function,
we can then collapse all the callers and drop the custom sim_{read,write}
logic entirely.
Some day we might want to add MMU support, but when we do, we'll want to
have the common layers handle things so all targets benefit.
|
|
The point of passing down the cpu to core reads/writes is to signal which
cpu is making the access. For system accesses (such as internal memory
initialization), passing the cpu down doesn't make sense, and in the case
of early init like cris, can cause crashes. Since the cpu isn't fully set
up at this point, if the core code tries to access some fields (like the
PC reg), it'll crash. While cris shouldn't be doing this setup here (it
should be in the inferior stage), we'll deal with that later.
|
|
For targets that process argv in sim_create_inferior, improve the code:
- provide more details in the comment
- make the check for when to re-init more robust
- clean out legacy sim_copy_argv code
This will be cleaned up more in the future when we have a common inferior
creation function, but at least help new ports get it right until then.
|
|
|
|
The frv port used the device logic to support a single cache address,
and the comments around that are "these were merely copied from a diff
port and are unused", plus the code to attach the memory is "#if 0".
Just punt it all.
|
|
The m32r port was using the device framework to handle two devices: the
cache and uart registers. Both can be implemented in the newer hardware
framework instead which allows us to drop the device logic entirely, as
well as delete the tconfig.h file.
While creating the new uart device model, I also added support for using
stdin to read/write data rather than only supporting sockets.
This has been lightly tested as there doesn't appear to be test coverage
for the code already. If anyone still cares about this port, then they
should (hopefully) file bug reports.
|
|
The cris port was using the device framework to handle two addresses when
the --cris-900000xx flag was specified. That can be implemented using the
newer hardware framework instead which allows us to drop the device logic
entirely, as well as delete the tconfig.h file. Basically we create a new
cris_900000xx device model and move the read logic out of devices.c and
into that. The rest of the devices logic was callback to the hardware
framework already.
|
|
This fixes a few warnings when compiling the rvdummy tool.
|
|
Much like we autodetect the path to the run program when there is none
set explicitly, do the same for the rvdummy program. Otherwise the
default make check fails to execute the helper properly.
|
|
These trace calls don't seem to add anything useful and break the cris
hw tests, so punt them. They were disabled before commit 6d519a4606b9
but were re-enabled as part of TRACE macro cleanups.
|
|
We enable this everywhere already, and all new ports should use the
engine logic, so no point in making it an option to disable.
|
|
Rather than include this for some targets, set it up so we can build it
all the time via the common code. This makes it easier for targets to
opt into it when they're ready, increases build coverage, and allows us
to centralize much of the logic.
We also get to delete tconfig.h from two more targets -- they were
setting WITH_DEVICES to 0 which has the same behavior as not defining
it at all.
While the SIM_HAVE_MODEL knob is gone, we now have WITH_MODEL_P, but it
is only used by the common sim-model code. We use it to declare dummy
model lists when the arch hasn't created its own.
|
|
The "MACH" and "MODEL" names are a bit generic and collide with symbols
used by other sections of code (like h8300's opcodes). Since these are
sim-specific types, they really should have a "SIM_" prefix.
|
|
These vestiges of the 20 year old emulator are just getting in the way.
Punt all the dead code we either don't compile or don't use.
|
|
This helps us break up tconfig.h more. Any file using this define should
be pulling in sim-main.h already, so things should continue working.
|
|
Only four targets implement this function, and three of them do nothing.
The 4th merely calls abort. Since calls to this function are followed
by calls to sim_hw_abort or sim_io_error, this is largely useless. In
the two places where we don't, replace the call with sim_engine_abort.
We want to kill off the WITH_DEVICES logic in favor of WITH_HW, so this
is a good first step.
|
|
We enable WITH_CALLBACK_MEMORY everywhere and don't provide a way to
turn it off, and no target does so. Make it unconditional for all
to keep things simple.
|
|
Since the core always provides CPU_INDEX, use it. The current code
doesn't actually use it even though it should since it doesn't include
the right headers.
|
|
With the LMA cleanup, we no longer need this define.
|
|
We want to kill off tconfig.h, so move the one define mips still uses
to sim-main.h.
|
|
Most targets already default to loading code via their LMA, but for
a few, this means the default changes from loading VMA to LMA. It's
better to have the different targets be consistent, and allows some
code clean up.
|
|
We've moved custom option install for other targets to sim_open, so update
cris too. It's the last one using MODULE_LIST, so we can drop that from
the common code too.
|
|
This code relies on the old sim-break module, but that was deleted in 2003.
The module only existed for gdb to tell the sim to set breakpoints on its
behalf, but then that logic was abandoned in favor of gdb knowing all about
proper breakpoints (since it does already for non-sim targets). Some dead
code lived on in the older ports though -- clean it up now.
|
|
Register the options in sim_open like other arches to avoid having to hack
up the common modules.
|
|
We build & bundle the watchpoint module everywhere, but we don't make
the command line flags available by default. A few targets opted in,
but most did not. Just enable the flag for everyone. Not all targets
will respect the flags (making them nops), but shouldn't be a big deal.
This is how we handle other common modules already.
|
|
No target has used this, and it's a cheap hack in place in using the
common memory module. We want everyone using that though, so drop
support for flatmem entirely.
|
|
This define isn't used anywhere (doesn't seem to ever have been used by
versions committed), so delete the commented out code as it's dead.
|
|
This was used by the old run interface, but we punted that awhile ago,
so drop this define too.
|
|
Fix occurrences of left-shifting negative constants in C code.
sim/arm/ChangeLog:
* thumbemu.c (handle_T2_insn): Fix left shift of negative value.
* armemu.c (handle_v6_insn): Likewise.
sim/avr/ChangeLog:
* interp.c (sign_ext): Fix left shift of negative value.
sim/mips/ChangeLog:
* micromips.igen (process_isa_mode): Fix left shift of negative
value.
sim/msp430/ChangeLog:
* msp430-sim.c (get_op, put_op): Fix left shift of negative value.
sim/v850/ChangeLog:
* simops.c (v850_bins): Fix left shift of negative value.
|
|
* aarch64/simulator.c (system_get): New function. Provides read
access to the dczid system register.
(do_mrs): New function - implements the MRS instruction.
(dexSystem): Call do_mrs for the MRS instruction. Halt on
unimplemented system instructions.
|
|
* msp430-sim.c (sim_open): Check for needed memory at address
0x500 not 0x200.
(get_op): Add support for F5 hardware multiply addresses.
(put_op): Likewise.
|
|
sim * configure.tgt: Add aarch64 entry.
* configure: Regenerate.
* sim/aarch64/configure.ac: New configure template.
* sim/aarch64/aclocal.m4: Generate.
* sim/aarch64/config.in: Generate.
* sim/aarch64/configure: Generate.
* sim/aarch64/cpustate.c: New file - functions for accessing
AArch64 registers.
* sim/aarch64/cpustate.h: New header.
* sim/aarch64/decode.h: New header.
* sim/aarch64/interp.c: New file - interface between GDB and
simulator.
* sim/aarch64/Makefile.in: New makefile template.
* sim/aarch64/memory.c: New file - functions for simulating
aarch64 memory accesses.
* sim/aarch64/memory.h: New header.
* sim/aarch64/sim-main.h: New header.
* sim/aarch64/simulator.c: New file - aarch64 simulator
functions.
* sim/aarch64/simulator.h: New header.
include/gdb * sim-aarch64.h: New file.
sim/test * configure: Regenerate.
* sim/aarch64: New directory.
|
|
Make sure we pass down the CPP/CXX/LD flags that configure set up for us
like we already do for C flags.
|
|
Make sure we call va_end even in the error case.
|
|
POSIX does not define $< behavior in ordinary rules, so avoid its use
to fix building on non-GNU make setups.
Reported-by: Christopher January <chris.january@allinea.com>
|
|
Keeping track of the right printf formats for the various types can be
a pretty big hassle, especially in common code which has to support a
variety of bitsizes. Take a page from the existing standards and add
a set of PRI macros which hide the details in a common header.
|
|
We don't want global variables in the sim as all state should be in the
sim state or in the cpu state. This pushes down all that logic for avr.
|
|
This is not entirely useful as avr doesn't (yet) store its register
state in the cpu state, but it does allow for switching to the common
code for these functions.
|
|
We can use the sim state everywhere now to get these values on the fly.
|
|
We can use the sim state everywhere now to get these values on the fly.
|
|
It's used in one place and can easily be replaced by using the sim state.
|
|
This was dropped from the sim core in 1997, so no point in having these
sim ports continue to define it.
|
|
Having this be a config option doesn't make sense: the code size is
pretty much the same (as all the logic is still active), and if it's
disabled, the sim throws an error if you try to use it. That means
we can't break sims that weren't using it before by enabling it all
the time.
|
|
Building a gdb that includes the PPC sim in C++ mode fails to link with:
(...)s.o compile-object-load.o compile-object-run.o compile-loc2c.o compile-c-support.o inflow.o init.o \
../sim/ppc/libsim.a ../readline/libreadline.a ../opcodes/libopcodes.a ../bfd/libbfd.a -lz ../libiberty/libiberty.a ../libdecnumber/libdecnumber.a -ldl -ldl -lncurses -lm -ldl -lguile-2.0 -lgc -lpthread -ldl -lutil -lm -lpython2.7 -Xlinker -export-dynamic -lexpat -llzma -lbabeltrace -lbabeltrace-ctf ../libiberty/libiberty.a build-gnulib/import/libgnu.a
../sim/ppc/libsim.a(sim_calls.o): In function `sim_open':
/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:73: undefined reference to `printf_filtered'
/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:73: undefined reference to `printf_filtered'
../sim/ppc/libsim.a(sim_calls.o): In function `sim_close':
/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:93: undefined reference to `printf_filtered'
/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:93: undefined reference to `printf_filtered'
../sim/ppc/libsim.a(sim_calls.o): In function `sim_load':
/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:102: undefined reference to `printf_filtered'
../sim/ppc/libsim.a(sim_calls.o):/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:102: more undefined references to `printf_filtered' follow
collect2: error: ld returned 1 exit status
The undefined references come from TRACE macro calls, which expand to
calls to printf_filtered.
But note that the sim's 'printf_filtered' is actually a #define to
'sim_io_printf_filtered', in sim_callbacks.h :
#define printf_filtered sim_io_printf_filtered
AFAICS, this is not meant to call gdb's printf_filtered function. The
ChangeLog entry that added the printf_filtered macro reads:
Tue Jul 30 21:12:24 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
* sim_callbacks.h (sim_io_printf_filtered): Replace
printf_filtered with a local simulator specific version. Add
#define printf_filtered to simplify updating of existing code.
That is, just another incomplete/partial transition. Maybe prior to
1996 this was really meant to call gdb's printf_filtered version.
The reference to printf_filtered appears because sim_calls.c, the
compilation unit that fails to link, has this at the top:
#undef printf_filtered /* blow away the mapping */
presumably so that this further below:
void
sim_io_printf_filtered(const char *fmt,
...)
{
(...)
callbacks->printf_filtered(callbacks, "%s", message);
}
works. So those TRACE macros instances in sim_calls.c just happen to
work because gdb is linked in, which satisfies the 'printf_filtered'
reference, when GDB is built in C mode. When built in C++ mode, the
problem is exposed, as GDB's printf_filtered is mangled.
The fix here is to make the TRACE macro call sim_io_printf_filtered
directly.
(Standalone "run" doesn't fail to link simply because the offending
routines are not part of its link.)
sim/ppc/ChangeLog
2015-11-17 Pedro Alves <palves@redhat.com>
* debug.h (TRACE, ITRACE, DTRACE, DITRACE, PTRACE): Call
sim_io_printf_filtered instead of printf_filtered.
|
|
No point in open coding this logic when we've got nifty helpers to do it.
|
|
Now that all arches (for the most part) have moved over, move sim-stop.o,
sim-reason.o, and sim-reg.o to the common object list and out of all the
arch ports.
|
