aboutsummaryrefslogtreecommitdiff
path: root/sim
AgeCommit message (Collapse)AuthorFilesLines
2011-03-27sim: bfin: handle saturation with RND12 sub insnsMike Frysinger2-1/+11
The current handling of the subtraction insn with the RND12 modifier works when saturation isn't involved. So add handling for this edge case to match the hardware. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-26sim: bfin: add missing VS set with add/sub insnsMike Frysinger2-0/+7
The 16bit add/sub insns missed setting the VS bit in ASTAT whenever the V bit was also set. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-25sim: bfin: add hw tracing to gpio/sic port eventsMike Frysinger3-10/+64
Makes it a lot easier to find out what's going on with interrupt lines if the ports have tracing output. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-25sim: bfin: fix GPIO logic bugs when processing eventsMike Frysinger2-4/+16
We need the DIR bit cleared, not set, in order for the pin to be treated as an input. When looking up the data value, we need to shift the "level" value over by "my_port" rather than "bit" as the latter has already been shifted over. We also should normalize the "level" coming in from the outside worlds to the set of {0,1} since those are the only values that matter to GPIOs. We need the BOTH bit set, not cleared, in order for the pin to trigger on both edges. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-25sim: bfin: fix clear/set/toggle GPIO handlingMike Frysinger2-0/+11
The clear/set/toggle MMRs aren't backed by "real" data; they implicitly perform bit operations on the associated data register. So when we go to process writes to them, we need to adjust the pointer accordingly so that the actual backing data is modified. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-24sim: bfin: document SIC limitationMike Frysinger2-1/+27
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-24sim: bfin: fix inverted W1C logicMike Frysinger14-17/+34
When I originally wrote the w1c helper funcs, I used it in a few places. Then I forgot how it worked and when I later documented it, I described the 3rd arg in the exact opposite way it is actually used. This error propagated to a bunch of devices registers that were not explicitly tested (a bunch of the devices are stubs which merely exist to say "no device is connected" to make device drivers happy). So once the documentation is unscrewed, fix all of the broken call sites. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-24sim: bfin: define more UART LSR bitsMike Frysinger2-7/+16
We'll need these bits in an upcoming patch, so map out the whole LSR MMR now. Fix up indentation style while we're here. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-24sim: bfin: fix typo in TWI stat regMike Frysinger2-1/+5
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-24sim: bfin: update VIT_MAX behavior to match hardware when Acc.X bits are setMike Frysinger2-2/+7
The Blackfin PRM says that the top 8 bits of the accumulator must be cleared when using the VIT_MAX insn, so the sim has followed this spec. Matching the hardware behavior though when the high bits are not cleared is easy to do and doesn't break existing behavior, so go for it. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-24sim: bfin: always do 16bit sign extension with the SEARCH insnMike Frysinger2-0/+10
The Blackfin PRM does not cover this case, but the hardware is clear: even if the search criteria is not met (and thus a new 16bit value is loaded up into the accumulator), the accumulator undergoes 16bit sign extension. So simply reload the low signed 16bits in that case. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-24sim: bfin: update AV and AC ASTAT bits with acc negationMike Frysinger2-6/+14
The Acc=-Acc insn can overflow or carry with edge values, so make sure we update the ASTAT bits accordingly to match the hardware. Also fix a thinko where we always updated AC0 even when working with A1 regs. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-24sim: bfin: fix thinko in SIC pin encodingMike Frysinger2-511/+516
When encoding the SIC/pin info into unique input port ids, I used bases of 100 when I meant to use 0x100. Rather than simply fix the decoding math in the different functions, create a few helper macros to simplify the SIC/pin encoding and decoding steps. This makes the resulting tables nice & clear. And now that pins are clear, the 533 and 537 port_event handlers may easily be merged into one. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-24sim: bfin: allow byteop[123]p src regs to be the sameMike Frysinger2-9/+5
The hardware allows the byteop[123]p insns to use the same src reg pair, so remove the combination check in the sim. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-24sim: bfin: fix thinko in bfin_gpio bus addressesMike Frysinger2-30/+38
The bus addresses have to be valid numbers, so 'g' and 'h' won't work. Oddly, the common code silently ignored this which is why I didn't notice in the first place. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-21 * gennltvals.sh: Search sys/_default_fcntl.h, in addition toKevin Buettner5-384/+390
fcntl.h and sys/fcntl.h, for constants. * nltvals.def: Regenerate. * sim-io.c (sim_io_stat, sim_io_fstat): New functions. * sim-io.h (sys/types.h, sys/stat.h): Include. (sim_io_stat, sim_io_fstat): Declare.
2011-03-21 * simops (OP_10007E0): Update errno handling as most trapsKevin Buettner2-3/+88
do not invoke the host's functionality directly. Invoke sim_io_stat() instead of stat() for implementing TARGET_SYS_stat. Implement TARGET_SYS_fstat, TARGET_SYS_rename, and TARGET_SYS_unlink.
2011-03-17sim: bfin: check for kill/preadMike Frysinger5-2/+25
If the host system (like Windows) doesn't support these functions, then make sure we don't use them. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-15sim: bfin: add GPIO device simulationMike Frysinger7-28/+369
This takes care of the MMR interface and pushing up interrupts. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-15sim: bfin: fix brace styleMike Frysinger27-27/+54
2011-03-15sim: bfin: fix brace styleMike Frysinger58-161/+342
2011-03-15sim: bfin: handle AZ updates with 16bit adds/subsMike Frysinger2-1/+6
We weren't updating AZ when doing a 16bit add or sub insn. Implement it. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-15sim: bfin: skip acc/ASTAT updates for movesMike Frysinger2-6/+10
No point in moving unchanged acc values to the acc regs, and avoid updating the acc ASTAT bits when only reading. This fixes incorrect changing of the ASTAT bits when they're only being read. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-15sim: bfin: handle AN (negative overflows) in dsp mult insnsMike Frysinger2-8/+40
The current dsp mult handler does not take care of overflows which turn values negative (and thus set AN in ASTAT). So implement it. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-15sim: bfin: handle V overflows in dsp mult insnsMike Frysinger2-7/+15
The current dsp mult handler does not take care of overflows and updating the V ASTAT bit. So implement it. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-15sim: bfin: decode ASTAT on failureMike Frysinger2-34/+79
When testing ASTAT regs, specific bit differences carry a lot more meaning than when checking the value of a data register. So automatically decode the bits of the two values and print things out so that people don't have to manually do it themselves every time. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-15sim: bfin: handle saturation with fract multiplicationsMike Frysinger2-0/+6
The saturation behavior with fract modes differs from non-fract modes. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-15sim: common: trim trailing whitespaceMike Frysinger42-292/+300
2011-03-14sim: bfin: forgot to cvs add the changelogMike Frysinger1-0/+29
2011-03-06sim: bfin: new portMike Frysinger108-0/+30271
This can boot Das U-Boot and a Linux kernel. It also supports Linux userspace FLAT and FDPIC (dynamic and static) ELFs. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-02-25 * callback.c (fdbad): Return EBADF rather than EINVAL for badKevin Buettner2-1/+6
file descriptors.
2011-02-14sim: punt zfree()Mike Frysinger46-125/+185
The sim keeps track of which allocations are zero-ed internally (via zalloc) and then calls a helper "zfree" function rather than "free". But this "zfree" function simply calls "free" itself. Since I can see no point in this and it is simply useless overhead, punt it. The only real change is in hw-alloc.c where we remove the zalloc_p tracking, and sim-utils.c where zfree is delete. The rest of the changes are a simple `sed` from "zfree" to "free". Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-02-14sim: change to 64bit time keeping to avoid 32bit overflowsMike Frysinger2-1/+5
The sim-events code jumps through some hoops to avoid using 64bit math to manage the current time. One fundamental assumption here is that by constantly scheduling the sim poll event a short time into the future, the 64bit difference will always fall into a signed 32bit value. This does work most of the time, except for when processing the sim poll event itself. Normally, sim_events_process() will dequeue the sim poll event, update the current time (time_from_event) according to the next pending event, process the sim poll event (which will then requeue the sim poll event), and then continue on. The problem here of course is that the current time is updated in that small window before the sim poll event gets a chance to reschedule itself. So if the 64bit difference between the current time and the next event does not fit into the signed 32bit value, time_from_event overflows, and the internal assert at the end of update_time_from_event() triggers. Since attempts at tweaking sim_events_process() logic introduced other subtle bugs (due to tangled assumptions between most pieces of the sim time keeping code), change the time_from_event to a real 64bit value. Tests on my system between a 32bit ELF and a 64bit ELF show no practical difference (it's all lost in the system noise). Basically, I booted a Linux kernel to userspace and then paniced it; this gave me a constant sample size of about 18 million insns. This was noticed when simulating Blackfin Das U-Boot. The simulated core timer is given the max unsigned timeout value possible on a 32bit processor (0xffffffff). This timeout value is used directly to schedule a hw event in the sim future (the IRQ firing). Once the sim poll event is kicked off, the next pending event is the core timer event which is more than 2^31 ticks in the future, and the sim aborts with: sim-events.c:435: assertion failed - current_time == sim_events_time (sd) Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-12sim: enable hw_tree_delete in sim_hw_uninstallMike Frysinger2-1/+5
I can't find any history for why the call to hw_tree_delete is commented out, and the VCS history shows that this goes back to the original import in 2009. I did find some vague reference to it from 2000 (pretty close to the original import of code), but no actual details. Without this call, every new instance of the sim results in all old previously allocated resources being leaked. With some devices, this isn't just memory, it's things like open file descriptors or mmaps. So if there are pending issues with this, I'd rather we get the sims sorted out rather than continuing to leak this stuff. Especially since the "let's wait for the sims to fix themselves" hasn't actually happened in the last 10+ years. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-12sim: check asprintf return valuesMike Frysinger5-6/+29
These are the last sources of build warnings (asprintf usage) that I see. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-11sim: allow memory maps to default to mapped filesMike Frysinger2-10/+38
I find it annoying when using --memory-mapfile that I also need to look up and manually specify the file size to the following --memory-region option. So make a length of 0 in the following --memory-region trigger an auto-sizing of the map to the length of the file being mapped. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-11http://sourceware.org/ml/gdb-patches/2010-11/msg00112.htmlAndrew Burgess14-10/+45
gdb/ChangeLog * remote-sim.c (gdbsim_store_register): Update API to sim_store_register to check more error conditions. include/gdb/ChangeLog * remote-sim.h (sim_store_register): Update the API documentation for this function. sim/erc32/ChangeLog sim/h8300/ChangeLog sim/m32c/ChangeLog sim/mn10300/ChangeLog sim/ppc/ChangeLog sim/rx/ChangeLog sim/v850/ChangeLog * ???.c (sim_store_register): Update return value to match new API.
2011-01-10sim: fix handling of 2nd arg to SIM_AC_OPTION_HARDWAREMike Frysinger2-3/+9
The 2nd arg to SIM_AC_OPTION_HARDWARE is described as "a space separated list of devices that override the defaults" while the 3rd arg is "a space separated list of extra target specific devices". But the macro doesn't seem to treat the 2nd arg this way. Instead, it will always add the default list of devices, and only add the extra target specific devices if the 2nd arg is not specified. So rework the logic slightly to handle the 2nd arg as documented. This shouldn't affect any targets in the tree as no one passes in a non- empty value as the 2nd arg. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10sim: add noreturn markings to more hw abort/halt funcsMike Frysinger3-4/+9
These functions either call abort() themselves, or call functions which are already marked noreturn. Either way, they don't return, so mark them as such so calling code can assume this. This fixes some uninitialized warnings due to code paths that end in an abort function. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-05 * testutils.inc: Correct comment syntax fallout fromHans-Peter Nilsson5-8/+12
copyright update. * utils-dsp.inc, utils-fpu.inc, utils-mdmx.inc: Ditto.
2011-01-05 * mips32-dsp.s: Update copyright year.Hans-Peter Nilsson2-1/+5
2011-01-05sim: ignore generated hw-config.hMike Frysinger2-0/+5
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-05sim: tweak load buffer type to avoid signed warningsMike Frysinger2-1/+5
The sim_load_file func creates a buffer with arbitrary data in it (reads it via the bfd). It then passes it on to a sim_write_fn which expects a unsigned char buffer. Since sim_load_file itself doesn't care about the contents, tweak the type to avoid signed mismatch warnings from gcc: common/sim-load.c: In function ‘sim_load_file’: common/sim-load.c:143: warning: pointer targets in passing argument 3 of ‘do_write’ differ in signedness common/sim-load.c:143: note: expected ‘const unsigned char *’ but argument is of type ‘char *’ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-05Copyright year update in sim/ppc/psim.texinfoJoel Brobecker2-2/+6
sim/ppc/ChangeLog: * psim.texinfo: Copyright year update.
2011-01-05Update the copyright year for most remaining files in GDBJoel Brobecker2-1/+5
2011-01-01run copyright.sh for 2011.Joel Brobecker343-350/+464
2010-12-29sim: HW_NALLOC: new alloc helperMike Frysinger2-0/+5
We have malloc (uninitialized buffer), zalloc (zeroed buffer), and nzalloc (zeroed array). But we don't have a way to allocate an uninitialized array. Add a HW_NALLOC to fill this gap. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-12-29sim: HW_NZALLOC: fix arg handlingMike Frysinger2-1/+5
The HW_NZALLOC macro has all caps args for some reason (unlike the other alloc helpers), and ends up not using the "ME" argument since its copy and paste source uses "me". Make all the args lowercase to match the style of all the other args and make it use the correct "me". Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-12-23sim: start a gitignoreMike Frysinger2-0/+11
2010-12-15sim: add --map-info optionMike Frysinger2-1/+50
There are options for listing the current device/hw tree and memory regions, but no way to find out at run time all the current mappings. So add a new --map-info option akin to the --memory-info option which displays all the current mappings. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
generated by cgit v1.1 at 2024-12-13 02:58:15 +0000