Age | Commit message (Collapse) | Author | Files | Lines |
|
(tmp-ld-cache): Likewise.
(tmp-ld-insn): Likewise.
|
|
|
|
|
|
|
|
|
|
|
|
* sim/cris/hw/rv-n-cris: New directory with tests.
|
|
* cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
(dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
(all): Depend on rvdummy$(EXEEXT).
* cris/configure.ac: Call SIM_AC_OPTION_WARNINGS. Check for
sys/socket.h and sys/select.h. Call SIM_AC_OPTION_HARDWARE,
default off.
* cris/configure: Regenerate.
* cris/cris-sim.h (cris_have_900000xxif): Declare here.
(enum cris_interrupt_type, crisv10deliver_interrupt)
(crisv32deliver_interrupt: New declarations.
* cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
sim_events_tickn and set state-events member work_pending when it's
time for the next event.
[WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
interrupt-delivery function.
* cris/crisv10f.c (MY (deliver_interrupt)): New function.
* cris/crisv32f.c (MY (deliver_interrupt)): New function.
* cris/devices.c: Include hw-device.h.
(device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
(device_io_write_buffer): Only perform 0x900000xx-functions if
cris_have_900000xxif is nonzero. Else if WITH_HW defined,
call hw_io_write_buffer. Add return 0 last in function.
* cris/sim-if.c (cris_have_900000xxif): Now global.
(sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
Force "-model" option, effectively.
* cris/sim-main.h (cris_interrupt_delivery_fn): New type.
(struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
|
|
(CRISV32F_OBJS): Remove semcrisv32f-switch.o.
(semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
|
|
(testr_h_dr, test_h_dr, ldmem_h_gr, mvr_h_mem): Ditto. Correct
syntax.
|
|
stack pointer values.
|
|
|
|
option-contents test.
|
|
(mem_put_hi): Hook in simulated trace port.
(mem_get_byte): Hook in simulated uart control port.
* opc2c: Be more picky about matching special comments.
* r8c.opc (shift_op): Limit shift counts to -16..16.
(BMcnd): Map conditional codes.
* reg.c (condition_true): Mask condition code to 4 bits.
* syscalls.c: Include local syscall.h.
* syscall.h: New, copied from libgloss.
|
|
|
|
* elfos.c (ARMul_OSHandleSWI): Call correct function for IsTTY.
|
|
mapping.
(cris_break_13_handler) <case TARGET_SYS_time>: New case.
|
|
|
|
* emul_unix.c (emul_unix_create): Likewise.
* tree.c (libiberty.h): Include it.
(tree_quote_property): New function.
* tree.h (tree_quote_property): Declare.
|
|
call meminfo. Return ENOSYS for unhandled RedBoot syscalls.
|
|
|
|
(unsigned32): Define as "unsigned int".
|
|
2005-10-06 Jim Blandy <jimb@redhat.com>
Add simulator for Renesas M32C and M16C.
* m32c: New directory.
* configure.ac: Add entry for Renesas M32C.
* configure: Regenerate.
sim/m32c/ChangeLog:
2005-10-06 Jim Blandy <jimb@redhat.com>
Simulator for Renesas M32C and M16C, by DJ Delorie <dj@redhat.com>,
with further work from Jim Blandy <jimb@redhat.com> and
Kevin Buettner <kevinb@redhat.com>.
* ChangeLog: New.
* Makefile.in: New.
* blinky.S: New.
* config.in: New.
* configure: New.
* configure.in: New.
* cpu.h: New.
* gdb-if.c: New.
* gloss.S: New.
* int.c: New.
* int.h: New.
* load.c: New.
* load.h: New.
* m32c.opc: New.
* main.c: New.
* mem.c: New.
* mem.h: New.
* misc.c: New.
* misc.h: New.
* opc2c.c: New.
* r8c.opc: New.
* reg.c: New.
* safe-fgets.c: New.
* safe-fgets.h: New.
* sample.S: New.
* sample.ld: New.
* sample2.c: New.
* srcdest.c: New.
* syscalls.c: New.
* syscalls.h: New.
* trace.c: New.
* trace.h: New.
|
|
|
|
sim/cris/asm/x7-v10.ms: Update expected cycle output.
|
|
|
|
cycle count for the current insn.
|
|
* utils-dsp.inc: New file.
* mips32-dsp.s: New test.
|
|
(dsp.o): New dependency.
(IGEN_INCLUDE): Add dsp.igen.
* configure.ac (mipsisa32r2*-*-*, mipsisa32*-*-*, mipsisa64r2*-*-*,
mipsisa64*-*-*): Add dsp to sim_igen_machine.
* configure: Regenerate.
* mips.igen: Add dsp model and include dsp.igen.
(MFHI, MFLO, MTHI, MTLO): Remove mips32, mips32r2, mips64, mips64r2,
because these instructions are extended in DSP ASE.
* sim-main.h (LAST_EMBED_REGNUM): Change from 89 to 96 because of
adding 6 DSP accumulator registers and 1 DSP control register.
(AC0LOIDX, AC0HIIDX, AC1LOIDX, AC1HIIDX, AC2LOIDX, AC2HIIDX, AC3LOIDX,
AC3HIIDX, DSPLO, DSPHI, DSPCRIDX, DSPCR, DSPCR_POS_SHIFT,
DSPCR_POS_MASK, DSPCR_POS_SMASK, DSPCR_SCOUNT_SHIFT, DSPCR_SCOUNT_MASK,
DSPCR_SCOUNT_SMASK, DSPCR_CARRY_SHIFT, DSPCR_CARRY_MASK,
DSPCR_CARRY_SMASK, DSPCR_CARRY, DSPCR_EFI_SHIFT, DSPCR_EFI_MASK,
DSPCR_EFI_SMASK, DSPCR_EFI, DSPCR_OUFLAG_SHIFT, DSPCR_OUFLAG_MASK,
DSPCR_OUFLAG_SMASK, DSPCR_OUFLAG4, DSPCR_OUFLAG5, DSPCR_OUFLAG6,
DSPCR_OUFLAG7, DSPCR_CCOND_SHIFT, DSPCR_CCOND_MASK,
DSPCR_CCOND_SMASK): New define.
(DSPLO_REGNUM, DSPHI_REGNUM): New array for DSP accumulators.
* dsp.c, dsp.igen: New files for MIPS DSP ASE.
|
|
|
|
cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
|
|
* sim/cris/asm/movmp.ms: Do not write to P0, P4 or P8.
* sim/cris/asm/raw13.ms: Write to MOF instead of WZ (P4).
|
|
cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
cris/semcrisv32f-switch.c: Regenerate.
|
|
|
|
|
|
* configure.in: Regenerate.
* config.in: Likewise.
* emul_netbsd.c (write_timezone): Guard with HAVE_GETTIMEOFDAY.
* emul_unix.c (do_unix_mkdir): Handle Win32 1-argument mkdir.
|
|
|
|
sim_resume. Expect target signal numbers from sim_stop_reason.
* wrapper.c (gdb/signals.h): Include it.
(SIGTRAP): Don't define.
(SIGBUS): Likewise.
(sim_stop_reason): Use TARGET_SIGNAL_* instead of SIG*.
* sim-reason.c (sim_stop_reason): Use
sim_signal_to_target, not sim_signal_to_host.
* sim-signal.c (sim_signal_to_host): Fix typo.
(sim_signal_to_target): New function.
* interp.c (gdb/signals.h): Include it.
(sim_stop_reason): Use TARGET_SIGNAL_*.
* interf.c: (gdb/signals.h): Include it.
(sim_stop_reason): Use TARGET_SIGNAL_*.
* sim_calls.c (gdb/signals.h): Include it.
(sim_stop_reason): Use TARGET_SIGNAL_*.
* psim.c (cntrl_c_simulation): Use TARGET_SIGNAL_*.
|
|
simulator.
|
|
(open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
TARGET_O_WRONLY.
(cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
F_GETFL on fd 0, 1 and 2.
|
|
last_open_fd, last_open_flags.
* cris/traps.c: Don't include targ-vals.h.
(TARGET_O_ACCMODE): Define.
(cris_break_13_handler): Set new _sim_cpu members.
<case TARGET_SYS_fcntl>: Support special case of F_GETFL.
Rearrange code as switch. Emit "unimplemented" abort for
unimplemented fcntl calls.
|
|
(syscall_stat32_map): Add entry for TARGET_SYS_stat.
(cris_break_13_handler) <case TARGET_SYS_stat>: New case.
|
|
* sim/arm/armos.c: Include limits.h
(unlink): Remove this macro. It is unused in this file and
conflicts with sim_callback->unlink.
(PATH_MAX): Define as 1024 if not already defined.
(ReadFileName): New function.
(SWIopen): Fix a potential buffer overflow.
(SWIremove): New function.
(SWIrename): Ditto.
(ARMul_OSHandleSWI): Handle the RDP calls SWI_IsTTY,
SWI_Remove, and SWI_Rename, as well as the RDI calls
AngelSWI_Reason_IsTTY, AngelSWI_Reason_Remove, and
AngelSWI_Reason_Rename.
|
|
low 32 bits are used after an unsigned long cast.
|
|
* interp.c (sim_memory_size): Use same amount of memory on Windows as
elsewhere.
|
|
* cpu.c,cpu.h,decode.c,decode.h,model.c,sem.c: Regenerate.
Contribute the following changes:
2003-09-29 Dave Brolley <brolley@redhat.com>
* frv-sim.h: Use CGEN_ATTR_VALUE_ENUM_TYPE in place of
CGEN_ATTR_VALUE_TYPE.
* mloop.in: Ditto.
* pipeline.c: Ditto.
* traps.c: Ditto.
|
|
* armdefs.h: Define ARMsword and ARMsdword. Use stdint.h when
available.
* armemu.c: Use them.
* armvirt.c (ARMul_MemoryInit): Use correct type for size.
* configure.ac: Check for stdint.h.
* config.in: Regenerate.
* configure: Regenerate.
|
|
(mcalloc): New function / macro.
(mfree): New macro.
(sim_size): Use mcalloc and mfree.
|
|
|
|
|