aboutsummaryrefslogtreecommitdiff
path: root/sim
AgeCommit message (Collapse)AuthorFilesLines
2013-05-15sim: arm: add support for MOVW and MOVT instructionsMike Frysinger4-4/+71
From: Jayant R. Sonar <Jayant.Sonar@kpitcummins.com> This patch adds simulator support for handling the armv7 instructions 'movw (immediate)' and 'movt'. Compiler frequently use these instructions to load the 32bit addresses of global variables, string pointers etc. into the general registers. In absence of support of these instructions: 1. GDB run simulator fails to print even simple "hello world" string on console. 2. Loading of global variable addresses into the registers fail causing arithmetic operation failures. Patch has been regression tested for arm-none-eabi (-march=armv7-a).
2013-05-13 * v850.igen (LDSR): Accept but ignore a selID parameter.Nick Clifton2-3/+9
2013-05-10gdbTom Tromey20-10/+62
Freddie Chopin <freddie_chopin@op.pl> PR build/15414: * configure: Rebuild. * configure.ac (build_warnings): Do not use -Wformat-nonliteral with -Wno-format. sim/common * acinclude.m4 (SIM_AC_OPTION_WARNINGS): Do not use -Wformat-nonliteral with -Wno-format. sim/bfin * configure: Rebuild. sim/cr16 * configure: Rebuild. sim/cris * configure: Rebuild. sim/d10v * configure: Rebuild. sim/igen * configure: Rebuild. sim/m68hc11 * configure: Rebuild. sim/mips * configure: Rebuild. sim/mn10300 * configure: Rebuild. sim/v850 * configure: Rebuild.
2013-05-06Move ChangeLog entry from sim/ to sim/ppc/...Joel Brobecker2-4/+4
... where it belongs.
2013-05-032013-05-03 Hafiz Abid Qadeer <abidh@codesourcery.com>Hafiz Abid Qadeer2-13/+6
revert: 2013-04-19 Nathan Froyd <froydnj@codesourcery.com> * ppc-instructions (isel): New instruction.
2013-04-192013-04-19 Nathan Froyd <froydnj@codesourcery.com>Hafiz Abid Qadeer2-0/+17
* ppc-instructions (isel): New instruction.
2013-03-31sim: frv/m32r: back out hard failure when dv-sockser is not availableMike Frysinger9-42/+34
These sims have optional support for the dv-sockser model, so do not make them hard failures. The Makefile made it seem like they didn't actually support things dynamically, but a further code dive into the source and the Makefile shows that things work out.
2013-03-26sim: rewrite SIM_AC_OPTION_HARDWARE a bit to simplify thingsMike Frysinger23-354/+448
There's no need to put the majority of the logic into the 3rd arg of the AC_ARG_ENABLE. Coupled with the lack of indentation, it makes it hard to follow, error prone to update, and duplicates code (with the 4th arg). So pull the logic out of the 3rd arg and outside of the AC_ARG_ENABLE macro. This allows us to gut the 4th arg entirely, merge with the code that followed the macro, and fix bugs related to the new dv-sockser in the process. Hopefully building the various sims with the default sim-hardware settings, as well as with explicit --{dis,en}able-sim-hardware flags, should all just work now.
2013-03-232013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>Joel Sherrill5-29/+34
* configure.ac: Use $SIM_DV_SOCKSER_O. * configure: Regenerated.
2013-03-232013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>Joel Sherrill12-8/+590
* configure.ac: Fail if dv-sockser.o not available. Error when --disable-sim-hardware is specified. * configure: Regenerated.
2013-03-232013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>Joel Sherrill5-3/+175
* configure.ac: Fail if dv-sockser.o not available. Error when --disable-sim-hardware is specified. * tconfig.in: Conditionalize use of dv_sockser_install. * configure: Regenerated. * config.in: Regenerated.
2013-03-232013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>Joel Sherrill5-6/+60
* configure.ac: Address use of dv-sockser.o. * tconfig.in: Conditionalize use of dv_sockser_install. * configure: Regenerated. * config.in: Regenerated.
2013-03-232013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>Joel Sherrill2-2/+23
* acinclude.m4: Add SIM_DV_SOCKSER_O which is empty on hosts which do not support dv-sockser.o. Add always as option to first argument to SIM_AC_OPTION_HARDWARE. Fail if hardware is always required to be enabled by simulator.
2013-03-15gdb:Steve Ellcey12-11/+25
2013-03-15 Steve Ellcey <sellcey@mips.com> * remote-sim.c (sim_command_completer): Make char arguments const. include: 2013-03-15 Steve Ellcey <sellcey@mips.com> * gdb/remote-sim.h (sim_command_completer): Make char arguments const. sim: 2013-03-15 Steve Ellcey <sellcey@mips.com> * arm/wrapper.c (sim_complete_command): Make char arguments const. * avr/interp.c (sim_complete_command): Ditto. * common/sim-options.c (sim_complete_command): Ditto. * cr16/interp.c (sim_complete_command): Ditto. * erc32/interf.c (sim_complete_command): Ditto. * m32c/gdb-if.c (sim_complete_command): Ditto. * microblaze/interp.c (sim_complete_command): Ditto. * ppc/sim_calls.c (sim_complete_command): Ditto. * rl78/gdb-if.c (sim_complete_command): Ditto. * rx/gdb-if.c (sim_complete_command): Ditto. * sh/interp.c (sim_complete_command): Ditto.
2013-03-14Fix erc32 simulator out-of-tree build failure.Joel Brobecker2-1/+6
sim/erc32/ChangeLog: * Makefile.in: Include build directory in search path to find config.h
2013-01-28 * simops.c (v850_rotl): New function.Nick Clifton6-0/+278
(v850_bins): New function. * simops.h: Add prototypes fir v850_rotl and v850_bins. * v850-dc: Add entries for V850e3v5. * v850.igen: Add support for v850e3v5. (ld.dw, st.dw, rotl, bins): New patterns.
2013-01-17Remove debug outputAnthony Green2-1/+4
2013-01-16 * rx.c (decode_opcode): Handle RXO_satr.Nick Clifton2-0/+20
2013-01-10 * interp.c (sim_open): Add support for bfd_arch_v850_rh850Nick Clifton4-16/+121
architecture type. Add support for bfd_mach_v850e2 and bfd_mach_v850e2v3 machine numbers. * v850.igen (dbtrap): Add support for SIM_OPEN_DEBUG. (cmpf.d): Correct order of operands. (cmpf.s): Likewise. (trncf.dul): New pattern. (trncf.duw): New pattern. (trncf.sul): New pattern. (trncf.suw): New pattern. * v850-dc: Correct bitfield selection for TRNCF.SW and CVTF.SW.
2013-01-08 * mem.c (MDBL): Correct value.Nick Clifton2-2/+7
(MDBH): Correct value.
2013-01-01Update years in copyright notice for the GDB files.Joel Brobecker539-585/+542
Two modifications: 1. The addition of 2013 to the copyright year range for every file; 2. The use of a single year range, instead of potentially multiple year ranges, as approved by the FSF.
2012-12-20Revert GPL version change in sim/bfin/aclocal.m4Joel Brobecker2-1/+7
sim/bfin/ChangeLog: * aclocal.m4: Revert the previous change changing the license from GPL v2 or later to GPL v3 or later (this file was generated).
2012-12-20Revert GPL version change in linux-fixed-code.s.Joel Brobecker2-1/+6
sim/bfin/ChangeLog: * linux-fixed-code.s: Revert the previous change changing the license from GPL v2 or later to GPL v3 or later.
2012-12-19Update sim's COPYING files.Joel Brobecker4-580/+1256
sim/arm/ChangeLog: * COPYING: Update to GPL version 3. sim/ppc/ChangeLog: * COPYING: Update to GPL version 3.
2012-12-19[sim] Update old contact info in GPL license noticesJoel Brobecker256-523/+264
sim/ChangeLog: Update old contact info in GPL license notices.
2012-12-19Update sim copyright headers from GPLv2-or-later to GPLv3-or-later.Joel Brobecker169-170/+174
gdb/sim/ChangeLog: Update the non-FSF-copyrighted files in sim to GPLv3 or later.
2012-11-20Fix sim build when configured with --enable-pluginsH.J. Lu31-27/+225583
* common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS condition. * common/acinclude.m4: Define lt_cv_dlopen_libs. * arm/configure: Regenerate. * avr/configure: Regenerate. * bfin/configure: Regenerate. * common/configure: Regenerate. * cr16/configure: Regenerate. * cris/configure: Regenerate. * d10v/configure: Regenerate. * erc32/configure: Regenerate. * frv/configure: Regenerate. * h8300/configure: Regenerate. * igen/configure: Regenerate. * iq2000/configure: Regenerate. * lm32/configure: Regenerate. * m32c/configure: Regenerate. * m32r/configure: Regenerate. * m68hc11/configure: Regenerate. * mcore/configure: Regenerate. * microblaze/configure: Regenerate. * mips/configure: Regenerate. * mn10300/configure: Regenerate. * moxie/configure: Regenerate. * ppc/configure: Regenerate. * rl78/configure: Regenerate. * rx/configure: Regenerate. * sh/configure: Regenerate. * sh64/configure: Regenerate. * testsuite/configure: Regenerate. * v850/configure: Regenerate.
2012-11-05* MAINTAINERS: Update my email address.Stephane Carrez2-1/+5
2012-10-032012-10-04 Chao-ying Fu <fu@mips.com>Steve Ellcey2-0/+16
Steve Ellcey <sellcey@mips.com> * mips/mips3264r2.igen (rdhwr): New.
2012-09-24Forgot to include ChangeLog in last checkin.Steve Ellcey1-0/+6
2012-09-242012-09-24 Steve Ellcey <sellcey@mips.com>Steve Ellcey3-3/+11
* mips/basic.exp: Add mips*-mti-elf* target. * configure.ac: Add mips*-mti-elf* target. * configure: Regenerate.
2012-09-13 * v850.igen (W,WWWW): Correct computation of register number.Nick Clifton2-14/+19
(JR32): Remove unnecessary comma. (cmovf.s): Register 0 is an invalid source register. (maddf.s): Remove bogus intermediary rounding. (nmaddf.s): Likewise. (trncf.sl): Remove bogus initial rounding. (trncf.dw): Likewise. (trncf.sl): Likewise. (trncf.sw): Likewise.
2012-09-08Adjust for branch target encoding changeAnthony Green2-10/+15
2012-09-042012-09-03 Joel Sherrill <joel.sherrill@oarcorp.com>Joel Sherrill3-4/+7
* configure.ac: Always link against dv-sockser.o. * configure: Regenerate.
2012-09-03 PR sim/14540Nick Clifton2-1/+7
* armsupp.c (ARMul_MRC): Return 0 if access to the MRC instruction is denied.
2012-08-30sim: cr16: update syscall listMike Frysinger3-25/+34
2012-08-30sim: cr16: improve trap handlingMike Frysinger4-2/+31
2012-08-30sim: cr16: add sim_complete_command stubMike Frysinger2-0/+9
2012-08-16oops - acxidentally omitted from previous delta.Nick Clifton1-0/+10
2012-08-16 * end.c: Include config.h before system header files.Nick Clifton7-0/+7
* erc32.c: Likewise. * exec.c: Likewise. * float.c: Likewise. * func.c: Likewise. * help.c: Likewise. * interf.c: Likewise.
2012-08-01 * wrapper.c (libiberty.h): Include.Kevin Buettner2-6/+14
(sim_store_register, sim_fetch_register): On success, return length, instead of -1.
2012-08-01sim: bfin: set bfrom alias field to correct sizeMike Frysinger2-10/+17
When the sim is built w/out the bfroms, we end up passing a length of 0 when mapping the rom region which the core sim code rejects. So add an alias field equal to the length to avoid that error. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-08-01sim: bfin: update return value in bfin_reg_{fetch,store}Mike Frysinger2-4/+10
The latest gdb sim-remote.c really wants a return value from the fetch/store register functions, so update the Blackfin sim to avoid the warnings/errors. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-06-19include "config.h" instead of BFD's sysdep.h in d10v/interp.cJoel Brobecker2-1/+19
The change of include file introduces some new warnings about functions being used without a prototype. So a few more system includes have been added to compensate for that. sim/d10v/ChangeLog: * interp.c: #include "config.h" instead of "sysdep.h". Add conditional include of string.h or strings.h, as well as conditional include of stdlib.h.
2012-06-17sim: cr16: include config.h rather than sysdep.h from bfdMike Frysinger2-1/+8
2012-06-17sim: moxie: fix build by including config.h firstMike Frysinger2-0/+6
2012-06-17 * interp.c: Include config.h first. Do not include sysdep.h.Hans-Peter Nilsson2-1/+5
2012-06-15sim/erc32/sys.h: Include "config.h".Joel Brobecker2-0/+5
This file includes "gdb/callback.h", which includes "bfd.h", which itself verifies that "config.h" was included earlier. sim/erc32/ChangeLog: * sys.h: Include "config.h".
2012-06-15Define PACKAGE macro in all sims' config.h.Joel Brobecker82-10/+543
Some of the common includes in include/gdb such as callback.h include bfd.h. But there was a recent change in bfd-in.h to require that config.h be included before bfd.h can be included: /* PR 14072: Ensure that config.h is included first. */ #if !defined PACKAGE && !defined PACKAGE_VERSION #error config.h must be included before this header #endif PACKAGE_VERSION is always defined by default by the AC_INIT autoconf macro, but PACKAGE isn't. This patch updates the SIM_AC_COMMON macro to define it, and then regenerates all configure scripts and config.in files. sim/common/changeLog: * acinclude.m4 (SIM_AC_COMMON): Define PACKAGE. * config.in, configure: Regenerate. sim/ChangeLog: * configure: Regenerate. sim/arm/ChangeLog: * config.in, configure: Regenerate. sim/avr/ChangeLog: * config.in, configure: Regenerate. sim/bfin/ChangeLog: * config.in, configure: Regenerate. sim/cr16/ChangeLog: * config.in, configure: Regenerate. sim/cris/ChangeLog: * config.in, configure: Regenerate. sim/d10v/ChangeLog: * config.in, configure: Regenerate. sim/erc32/ChangeLog: * config.in, configure: Regenerate. sim/frv/ChangeLog: * config.in, configure: Regenerate. sim/h8300/ChangeLog: * config.in, configure: Regenerate. sim/iq2000/ChangeLog: * config.in, configure: Regenerate. sim/lm32/ChangeLog: * config.in, configure: Regenerate. sim/m32c/ChangeLog: * config.in, configure: Regenerate. sim/m32r/ChangeLog: * config.in, configure: Regenerate. sim/m68hc11/ChangeLog: * config.in, configure: Regenerate. sim/mcore/ChangeLog: * config.in, configure: Regenerate. sim/microblaze/ChangeLog: * config.in, configure: Regenerate. sim/mips/ChangeLog: * config.in, configure: Regenerate. sim/mn10300/ChangeLog: * config.in, configure: Regenerate. sim/moxie/ChangeLog: * config.in, configure: Regenerate. sim/ppc/ChangeLog: * configure: Regenerate. sim/rl78/ChangeLog: * config.in, configure: Regenerate. sim/rx/ChangeLog: * config.in, configure: Regenerate. sim/sh/ChangeLog: * config.in, configure: Regenerate. sim/sh64/ChangeLog: * config.in, configure: Regenerate. sim/v850/ChangeLog: * config.in, configure: Regenerate. sim/testsuite/ChangeLog: * configure: Regenerate.
2012-06-13 * wrapper.c (sim_create_inferior): Treat WMMX2 binaries as iWMMXtNick Clifton2-0/+6
binaries (for now).
generated by cgit v1.1 at 2024-11-04 04:55:09 +0000