aboutsummaryrefslogtreecommitdiff
path: root/sim
AgeCommit message (Collapse)AuthorFilesLines
2011-01-11http://sourceware.org/ml/gdb-patches/2010-11/msg00112.htmlAndrew Burgess14-10/+45
gdb/ChangeLog * remote-sim.c (gdbsim_store_register): Update API to sim_store_register to check more error conditions. include/gdb/ChangeLog * remote-sim.h (sim_store_register): Update the API documentation for this function. sim/erc32/ChangeLog sim/h8300/ChangeLog sim/m32c/ChangeLog sim/mn10300/ChangeLog sim/ppc/ChangeLog sim/rx/ChangeLog sim/v850/ChangeLog * ???.c (sim_store_register): Update return value to match new API.
2011-01-10sim: fix handling of 2nd arg to SIM_AC_OPTION_HARDWAREMike Frysinger2-3/+9
The 2nd arg to SIM_AC_OPTION_HARDWARE is described as "a space separated list of devices that override the defaults" while the 3rd arg is "a space separated list of extra target specific devices". But the macro doesn't seem to treat the 2nd arg this way. Instead, it will always add the default list of devices, and only add the extra target specific devices if the 2nd arg is not specified. So rework the logic slightly to handle the 2nd arg as documented. This shouldn't affect any targets in the tree as no one passes in a non- empty value as the 2nd arg. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10sim: add noreturn markings to more hw abort/halt funcsMike Frysinger3-4/+9
These functions either call abort() themselves, or call functions which are already marked noreturn. Either way, they don't return, so mark them as such so calling code can assume this. This fixes some uninitialized warnings due to code paths that end in an abort function. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-05 * testutils.inc: Correct comment syntax fallout fromHans-Peter Nilsson5-8/+12
copyright update. * utils-dsp.inc, utils-fpu.inc, utils-mdmx.inc: Ditto.
2011-01-05 * mips32-dsp.s: Update copyright year.Hans-Peter Nilsson2-1/+5
2011-01-05sim: ignore generated hw-config.hMike Frysinger2-0/+5
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-05sim: tweak load buffer type to avoid signed warningsMike Frysinger2-1/+5
The sim_load_file func creates a buffer with arbitrary data in it (reads it via the bfd). It then passes it on to a sim_write_fn which expects a unsigned char buffer. Since sim_load_file itself doesn't care about the contents, tweak the type to avoid signed mismatch warnings from gcc: common/sim-load.c: In function ‘sim_load_file’: common/sim-load.c:143: warning: pointer targets in passing argument 3 of ‘do_write’ differ in signedness common/sim-load.c:143: note: expected ‘const unsigned char *’ but argument is of type ‘char *’ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-05Copyright year update in sim/ppc/psim.texinfoJoel Brobecker2-2/+6
sim/ppc/ChangeLog: * psim.texinfo: Copyright year update.
2011-01-05Update the copyright year for most remaining files in GDBJoel Brobecker2-1/+5
2011-01-01run copyright.sh for 2011.Joel Brobecker343-350/+464
2010-12-29sim: HW_NALLOC: new alloc helperMike Frysinger2-0/+5
We have malloc (uninitialized buffer), zalloc (zeroed buffer), and nzalloc (zeroed array). But we don't have a way to allocate an uninitialized array. Add a HW_NALLOC to fill this gap. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-12-29sim: HW_NZALLOC: fix arg handlingMike Frysinger2-1/+5
The HW_NZALLOC macro has all caps args for some reason (unlike the other alloc helpers), and ends up not using the "ME" argument since its copy and paste source uses "me". Make all the args lowercase to match the style of all the other args and make it use the correct "me". Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-12-23sim: start a gitignoreMike Frysinger2-0/+11
2010-12-15sim: add --map-info optionMike Frysinger2-1/+50
There are options for listing the current device/hw tree and memory regions, but no way to find out at run time all the current mappings. So add a new --map-info option akin to the --memory-info option which displays all the current mappings. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-12-14(decode_opcode): RXO_branchrel is relative to the opcode's PC, notDJ Delorie2-2/+4
the address following the opcode.
2010-12-14* rx.c (decode_opcode): For "MVFC PC,", use the address of theDJ Delorie2-0/+13
opcode, not the address following the opcode.
2010-12-04* Makefile.in: Use CC_FOR_BUILD to build opc2c.Masaki Muranaka2-3/+12
2010-11-23sim: profile: fix building with --disable-sim-profileMike Frysinger2-0/+16
When the sim is configured with profile support disabled, the build fails: ./../common/sim-profile.c: In function 'profile_option_handler': ./../common/sim-profile.c:337:6: warning: implicit declaration of function 'PROFILE_PC_FREQ' ./../common/sim-profile.c:337:6: error: lvalue required as left operand of assignment ./../common/sim-profile.c:351:6: warning: implicit declaration of function 'PROFILE_PC_NR_BUCKETS' ./../common/sim-profile.c:351:6: error: lvalue required as left operand of assignment ./../common/sim-profile.c:381:6: warning: implicit declaration of function 'PROFILE_PC_SHIFT' ./../common/sim-profile.c:381:6: error: lvalue required as left operand of assignment ./../common/sim-profile.c:405:8: warning: implicit declaration of function 'PROFILE_PC_START' ./../common/sim-profile.c:405:8: error: lvalue required as left operand of assignment ./../common/sim-profile.c:406:8: warning: implicit declaration of function 'PROFILE_PC_END' ./../common/sim-profile.c:406:8: error: lvalue required as left operand of assignment ./../common/sim-profile.c: In function 'profile_uninstall': ./../common/sim-profile.c:1299:7: warning: implicit declaration of function 'PROFILE_INSN_COUNT' ./../common/sim-profile.c:1299:37: warning: comparison between pointer and integer ./../common/sim-profile.c:1300:2: warning: passing argument 1 of 'zfree' makes pointer from integer without a cast ../common/sim-utils.h:30:6: note: expected 'void *' but argument is of type 'int' make[2]: *** [sim-profile.o] Error 1 So add some stubs similar to how some of the other subsystems are stubbed out so things build correctly. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-11-23sim: cast away hw/device differencesMike Frysinger2-0/+8
When building with device and hw support, the sim-core code generates a lot of build time warnings such as: ./../common/sim-core.c: In function 'sim_core_map_attach': ./../common/sim-core.c:198:7: warning: passing argument 1 of 'device_error' from incompatible pointer type ../common/sim-core.h:347:6: note: expected 'struct device *' but argument is of type 'struct hw *' ./../common/sim-core.c:235:7: warning: passing argument 1 of 'device_error' from incompatible pointer type ../common/sim-core.h:347:6: note: expected 'struct device *' but argument is of type 'struct hw *' In reality, these two structures get cast back and forth in the core code already and so are "compatible". So tweak the three functions that generate all of these warnings to include the casts automatically. I know this isn't exactly clean, but the current device/hw ifdef approach is full of landmines itself and I'm not entirely sure how to unscrew it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-11-16sim: dv-sockser: add a write buffer variantMike Frysinger3-4/+18
Rather than having to bang out chunks of data one byte at a time over the socket interface, add a write variant that accepts an arbitrarily long buffer. This speeds things up considerably when we have many chars to send out at once. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-11-12* rx.c (lsb_count): New.DJ Delorie2-7/+94
(divu_cycles): New. (div_cycles): New. (decode_opcode): Fix cycle count math for div, divu, suntil, and swhile.
2010-10-09Regenerate for bool -> bool_ changeAlan Modra4-59/+67
2010-10-06 * callback.c (os_lseek): Call wrap on lseek result.Hans-Peter Nilsson2-1/+5
2010-10-06 * traps.c (cris_break_13_handler): Pass lseekHans-Peter Nilsson2-0/+13
offset parameter as sign-extended.
2010-10-06 * sim/cris/c/seek3.c, sim/cris/c/seek4.c: New tests.Hans-Peter Nilsson3-0/+97
2010-09-30 * mem.c (rx_mem_ptr): When invalidating the decode cache, accountKevin Buettner2-3/+15
for the fact that the instruction decoder never uses swapped addresses.
2010-09-29 * rx.c (decode_opcode: RXO_int): Only break out of the emulationNick Clifton2-1/+8
loop if rx_syscall() does not return a RX_STEPPED result.
2010-09-24 * rx.c (decode_opcode): Add cycle information for RXO_smovu.Kevin Buettner2-0/+8
2010-09-24Fix typo in ChangeLog entry.Kevin Buettner1-1/+1
2010-09-23 * cpu.h (reset_decoder): Declare.Kevin Buettner4-0/+15
* load.c (rx_load): Call `reset_decoder'. * rx.c (reset_decoder): New function.
2010-09-23 * rx.c (decode_opcode): Declare `rx' as unsigned.Kevin Buettner2-1/+3
2010-09-23 * fpu.c, gdb-if.c, load.c, misc.c, syscalls.c (config.h): Include.Kevin Buettner6-0/+9
2010-08-24 * sim/cris/asm/nonvcv32.ms: Neutralize changed &&-in-macro gas syntax.Hans-Peter Nilsson2-4/+8
2010-07-29[include/opcode]DJ Delorie7-204/+240
* rx.h (RX_Operand_Type): Add TwoReg. (RX_Opcode_ID): Remove ediv and ediv2. [opcodes] * rx-decode.opc (SRR): New. (rx_decode_opcode): Use it for movbi and movbir. Decode NOP2 (mov r0,r0) and NOP3 (max r0,r0) special cases. * rx-decode.c: Regenerate. [sim/rx] * rx.c (decode_cache_base): New. (id_names): Remove ediv and edivu. (optype_names): Add TwoReg. (maybe_get_mem_page): New. (rx_get_byte): Call it. (get_op): Add TwoReg support. (put_op): Likewise. (PD, PS, PS2, GD, GS, GS2, DSZ, SSZ, S2SZ, US1, US2, OM): "opcode" is a pointer now. (DO_RETURN): New. We use longjmp to return an exception result. (decode_opcode): Make opcode a pointer to the decode cache. Save decoded opcode information and re-use. Call DO_RETURN instead of return throughout. Remove ediv and edivu. * mem.c (ptdc): New. Adds decode cache. (rx_mem_ptr): Support it. (rx_mem_decode_cache): New. * mem.h (enum mem_ptr_action): add MPA_DECODE_CACHE. (rx_mem_decode_cache): Declare. * gdb-if.c (sim_resume): Add decode_opcode's setjmp logic here... * main.c (main): ...and here. Use a fast loop if neither trace nor disassemble is given. * cpu.h (RX_MAKE_STEPPED, RX_MAKE_HIT_BREAK, RX_MAKE_EXITED, RX_MAKE_STOPPED, RX_EXITED, RX_STOPPED): Adjust so that 0 is not a valid code for anything.
2010-07-28Sort *alphabetically* this timeDJ Delorie1-1/+1
2010-07-28[sim/rx]DJ Delorie12-748/+2359
* README.txt: New. * config.h (CYCLE_ACCURATE, CYCLE_STATS): New. * configure.in (--enable-cycle-accurate, --enable-cycle-stats): New. Default to enabled. * configure: Regenerate. * cpu.h (regs_type): Add cycle tracking info. (reset_pipeline_stats): Declare. (halt_pipeline_stats): Declare. (pipeline_stats): Declare. * main.c (done): Call pipeline_stats(). * mem.h (rx_mem_ptr): Moved to here ... * mem.c (mem_ptr): ... from here. Rename throughout. (mem_put_byte): Move LEDs to Port A. Add Port B to control cycle statistics. Move UART to SCI4. (mem_put_hi): Add TPU 1-2. TPU 1 and 2 count CPU cycles. * reg.c (init_regs): Set Rt reg to -1 (no reg). * rx.c: Add cycle counting and statistics throughout. (rx_get_byte): Optimize for speed. (decode_opcode): Likewise. (reset_pipeline_stats): New. (halt_pipeline_stats): New. (pipeline_stats): New. * trace.c (sim_disasm_one): Print cycle count. [include/opcode] * rx.h (RX_Opcode_ID): Add nop2 and nop3 for statistics.
2010-07-28* MAINTAINERS: Add self as RX maintainer. Sort list.DJ Delorie2-1/+6
2010-07-07 * gdb-if.c (sim_store_register): Add case for sim_rx_acc_regnum.Kevin Buettner2-0/+8
2010-06-24Add "acc" register. Revise register order and names.Kevin Buettner2-0/+12
2010-06-08oops - omitted from previous deltaNick Clifton1-0/+5
2010-06-08 * reg.c (set_oszc): Use unsigned int for the mask.Nick Clifton2-4/+9
(set_szc, set_osz, set_sz): Likewise.
2010-05-28Revert accidentally committed changes that aren't ready yet.Kevin Buettner1-7/+0
2010-05-28 * gdb-if.c (sim_do_command): Add a "sim verbose noisy" command.Kevin Buettner2-1/+14
2010-05-262010-05-26 Ozkan Sezer <sezeroz@gmail.com>Ozkan Sezer10-13/+41
gdb/ * ser-tcp.c (net_open): Check error return from socket() call by its equality to -1 not by it being negative. (net_close): Likewise. gdb/gdbserver/ * gdbreplay.c (remote_open): Check error return from socket() call by its equality to -1 not by it being negative. * remote-utils.c (remote_open): Likewise. sim/arm/ * communicate.c (MYread_char): Check error return from accept() call by its equality to -1 not by it being negative. (MYread_charwait): Likewise. * main.c (main): Likewise for both socket() and accept() calls. sim/common/ * dv-sockser.c (dv_sockser_init): Check error return from socket() call by its equality to -1 not by it being negative. (connected_p): Likewise for accept() call. sim/cris/ * dv-rv.c (hw_rv_init_socket): Check error return from socket() call by its equality to -1 not by it being negative. (hw_rv_write): Likewise. (hw_rv_handle_incoming): Likewise. (hw_rv_poll_once): Likewise. * rvdummy.c (setupsocket): Likewise. (main): Likewise for accept() call as returned from setupsocket(). sim/m32c/ * main.c (setup_tcp_console): Check error return from socket() call by its equality to -1 not by it being negative.
2010-05-20Fix erc32 sim build failure due to missing stdint.h.Joel Brobecker2-3/+10
* sis.h: Remove #include <stdint.h>. (uint64, int64): Redefine without using stdint.h. (UINT64_MAX): Define.
2010-05-112010-04-20 Tiemen Schut <T.Schut@sron.nl>Joel Sherrill6-42/+54
* erc32.c (sis_memory_write): Change prototype to const unsigned char *. * func.c (exec_cmd, event, advance_time, wait_for_irq): Use uint64 for counts. * interf.c (run_sim): Change icount to uint64_t. Use strtol directly. (sim_resume): Specify maximum run time as uint64. * sis.c (run_sim): Change icount to uint64_t. * sis.h: Define uint64 as uint64_t. Change various fields and prototypes to uint64 to support longer simulations.
2010-04-26sim: unify target->subdir handling for default testsMike Frysinger11-248/+461
The testsuite subdir has a note about unifying the target->subdir logic, so do just that. The end goal here is to have `make check` work out of the box without having to delve into dejagnu internals. The target-specific logic is split out of the top level configure.ac file and into a dedicated configure.tgt similar to other subprojects (gdb and ld and etc...) with the difference that this file has to be included at the m4 level instead of the shell level. This is necessary only because autoconf requires AC_CONFIG_SUBDIRS be given a string literal and not a variable value. Then the toplevel and the testsuite configure files pull this in, the sim subdir gets expanded into testsuite/site.exp, and the default sim run code uses this info to set the sim path to the local compiled run file if it hasn't already been specified. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-04-23sim: fix fpu missing initializer warningsMike Frysinger2-2/+6
The current fpu code with externals enabled results in the warnings: common/sim-fpu.c:2437: warning: missing initializer common/sim-fpu.c:2437: warning: (near initialization for 'sim_fpu_zero.sign') common/sim-fpu.c:2440: warning: missing initializer common/sim-fpu.c:2440: warning: (near initialization for 'sim_fpu_qnan.sign') So tweak the old style initializers to avoid these. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-04-22sim: profile: implement --profile-file backendMike Frysinger2-1/+5
Need to update the sim_profile_print_bar() call after the common/ changes. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-04-22sim: profile: implement --profile-file backendMike Frysinger2-1/+5
Need to update the sim_profile_print_bar() call after the common/ changes. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
generated by cgit v1.1 at 2024-12-18 22:31:15 +0000