Age | Commit message (Collapse) | Author | Files | Lines |
|
copyright update.
* utils-dsp.inc, utils-fpu.inc, utils-mdmx.inc: Ditto.
|
|
|
|
|
|
|
|
|
|
The testsuite subdir has a note about unifying the target->subdir logic,
so do just that. The end goal here is to have `make check` work out of
the box without having to delve into dejagnu internals.
The target-specific logic is split out of the top level configure.ac file
and into a dedicated configure.tgt similar to other subprojects (gdb and
ld and etc...) with the difference that this file has to be included at
the m4 level instead of the shell level. This is necessary only because
autoconf requires AC_CONFIG_SUBDIRS be given a string literal and not a
variable value.
Then the toplevel and the testsuite configure files pull this in, the sim
subdir gets expanded into testsuite/site.exp, and the default sim run code
uses this info to set the sim path to the local compiled run file if it
hasn't already been specified.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
|
|
config/:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump to 2.64.
/:
* configure: Regenerate.
etc/:
* configure: Regenerate.
sim/common/:
* config.in: Regenerate.
* configure: Likewise.
sim/iq2000/:
* config.in: Regenerate.
* configure: Likewise.
sim/d10v/:
* config.in: Regenerate.
* configure: Likewise.
sim/igen/:
* config.in: Regenerate.
* configure: Likewise.
sim/m32r/:
* config.in: Regenerate.
* configure: Likewise.
sim/frv/:
* config.in: Regenerate.
* configure: Likewise.
sim/:
* avr/config.in: Regenerate.
* avr/configure: Likewise.
* configure: Likewise.
* cris/config.in: Likewise.
* cris/configure: Likewise.
sim/h8300/:
* config.in: Regenerate.
* configure: Likewise.
sim/mn10300/:
* config.in: Regenerate.
* configure: Likewise.
sim/ppc/:
* config.in: Regenerate.
* configure: Likewise.
sim/erc32/:
* config.in: Regenerate.
* configure: Likewise.
sim/arm/:
* config.in: Regenerate.
* configure: Likewise.
sim/m68hc11/:
* config.in: Regenerate.
* configure: Likewise.
sim/lm32/:
* config.in: Regenerate.
* configure: Likewise.
sim/sh64/:
* config.in: Regenerate.
* configure: Likewise.
sim/v850/:
* config.in: Regenerate.
* configure: Likewise.
sim/cr16/:
* config.in: Regenerate.
* configure: Likewise.
sim/moxie/:
* config.in: Regenerate.
* configure: Likewise.
sim/m32c/:
* config.in: Regenerate.
* configure: Likewise.
sim/mips/:
* config.in: Regenerate.
* configure: Likewise.
sim/mcore/:
* config.in: Regenerate.
* configure: Likewise.
sim/testsuite/d10v-elf/:
* configure: Regenerate.
sim/testsuite/:
* configure: Regenerate.
sim/testsuite/frv-elf/:
* configure: Regenerate.
sim/testsuite/m32r-elf/:
* configure: Regenerate.
sim/testsuite/mips64el-elf/:
* configure: Regenerate.
sim/sh/:
* config.in: Regenerate.
* configure: Likewise.
gold/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
* testsuite/Makefile.in: Likewise.
gprof/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* configure: Likewise.
* gconfig.in: Likewise.
opcodes/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
gas/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
* doc/Makefile.in: Likewise.
ld/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
gdb/:
* aclocal.m4: Regenerate.
* config.in: Likewise.
* configure: Likewise.
* gnulib/Makefile.in: Likewise.
gdb/doc/:
* configure: Regenerate.
gdb/gdbserver/:
* aclocal.m4: Regenerate.
* config.in: Likewise.
* configure: Likewise.
gdb/testsuite/:
* configure: Regenerate.
* gdb.hp/configure: Likewise.
* gdb.hp/gdb.aCC/configure: Likewise.
* gdb.hp/gdb.base-hp/configure: Likewise.
* gdb.hp/gdb.compat/configure: Likewise.
* gdb.hp/gdb.defects/configure: Likewise.
* gdb.hp/gdb.objdbg/configure: Likewise.
* gdb.stabs/configure: Likewise.
binutils/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
* doc/Makefile.in: Likewise.
bfd/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
bfd/doc/:
* Makefile.in: Regenerate.
readline/:
* configure: Regenerate.
readline/examples/rlfe/:
* configure: Regenerate.
|
|
sim/cris/asm/opterr3.ms, sim/cris/asm/bare3.ms: New tests.
* lib/sim-defs.exp (run_sim_test): New option progopts.
|
|
in the previous copyright update.
|
|
sim/cris/c/mmap8.c, sim/cris/c/hellodyn3.c: New tests.
|
|
|
|
|
|
|
|
MAP_PRIVATE and use this macro in the mmap call.
* sim/cris/c/mmap4.c: New test.
|
|
|
|
|
|
|
|
sim/cris/c/badldso2.c, sim/cris/c/badldso3.c,
sim/cris/c/helloaout.c, sim/cris/c/hellodyn.c,
sim/cris/c/hellodyn2.c, sim/cris/c/writev1.c,
sim/cris/c/writev2.c: New tests.
* sim/cris/c/c.exp: If compiler links libc.so when attempting to
link dynamically, create symlink named "lib" to the directory
where it is found. Handle new test-case option "dynamic".
|
|
differences in getopt_long error message quoting.
|
|
|
|
|
|
|
|
addb.cgs addd.cgs addi.cgs andb.cgs andd.cgs andw.cgs
ashub.cgs ashub_i.cgs ashud.cgs ashud_i.cgs ashuw.cgs
ashuw_i.cgs cmpi.cgs cmpw.cgs jlt.cgs jump.cgs loadd.cgs
loadw.cgs lshb.cgs lshb_i.cgs lshd.cgs lshd_i.cgs lshw.cgs
lshw_i.cgs movb.cgs movd.cgs movw.cgs movxb.cgs movxw.cgs
movzb.cgs movzw.cgs mulb.cgs muluw.cgs mulw.cgs orb.cgs
ord.cgs orw.cgs pop1.cgs pop2.cgs pop3.cgs popret1.cgs
popret2.cgs popret3.cgs push1.cgs push2.cgs push3.cgs
Added BIT operation testcases:
cbitb.cgs cbitw.cgs sbitb.cgs sbitw.cgs tbitb.cgs tbit.cgs and tbitw.cgs
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* configure.ac (v850): V850 now has a testsuite.
* configure (v850): Likewise.
Index: testsuite/ChangeLog
* sim/v850/: New directory.
* sim/v850/allinsns.exp: New.
* sim/v850/bsh.cgs: New.
* sim/v850/div.cgs: New.
* sim/v850/divh.cgs: New.
* sim/v850/divh_3.cgs: New.
* sim/v850/divhu.cgs: New.
* sim/v850/divu.cgs: New.
* sim/v850/sar.cgs: New.
* sim/v850/satadd.cgs: New.
* sim/v850/satsub.cgs: New.
* sim/v850/satsubi.cgs: New.
* sim/v850/satsubr.cgs: New.
* sim/v850/shl.cgs: New.
* sim/v850/shr.cgs: New.
* sim/v850/testutils.cgs: New.
* sim/v850/testutils.inc: New.
Index: v850/ChangeLog
* simops.c (OP_C0): Correct saturation logic.
(OP_220): Likewise.
(OP_A0): Likewise.
(OP_660): Likewise.
(OP_80): Likewise.
* simops.c (OP_2A0): If the shift count is zero, clear the
carry.
(OP_A007E0): Likewise.
(OP_2C0): Likewise.
(OP_C007E0): Likewise.
(OP_280): Likewise.
(OP_8007E0): Likewise.
* simops.c (OP_2C207E0): Correct PSW flags for special divu
conditions.
(OP_2C007E0): Likewise, for div.
(OP_28207E0): Likewise, for divhu.
(OP_28007E0): Likewise, for divh. Also, sign-extend the correct
operand.
* v850.igen (divh): Likewise, for 2-op divh.
* v850.igen (bsh): Fix carry logic.
|
|
|
|
stack-pointer match pattern for 4K host environment.
|
|
test_cc.
* sim/cris/asm/asr.ms: Correct expected condition code flags.
* sim/cris/asm/boundr.ms: Ditto.
* sim/cris/asm/dstep.ms: Ditto.
* sim/cris/asm/lsr.ms: Ditto.
* sim/cris/asm/movecr.ms: Ditto.
* sim/cris/asm/mover.ms: Ditto.
* sim/cris/asm/neg.ms: Ditto. Use test_cc, not test_move_cc.
* sim/cris/asm/op3.ms: Check the condition code flags after the insn
under test.
* sim/cris/asm/movecrt10.ms: Update expected number of simulated
cycles.
* sim/cris/asm/movecrt32.ms: Ditto.
* sim/cris/asm/jsr.ms: Don't use local label 8.
* sim/cris/asm/nonvcv32.ms: New test.
|
|
* callback.c (cb_is_stdin, cb_is_stdout, cb_is_stderr): Add functions.
* syscall.c (cb_syscall): Test for stdin/out/err, not just fd 0/1/2.
2007-10-11 Jesper Nilsson <jesper.nilsson@axis.com>
* callback.h (cb_is_stdin, cb_is_stdout, cb_is_stderr): Add prototypes.
2007-10-11 Jesper Nilsson <jesper.nilsson@axis.com>
* sim/cris/c/freopen2.c: Added testcase.
|
|
* utils-dsp.inc: Change license to GPL version 3.
* utils-fpu.inc: Change license to GPL version 3.
* utils-mdmx.inc: Change license to GPL version 3.
|
|
to GPLv3.
|
|
* config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
(macro_build): Add case '2'.
(macro): Expand M_BALIGN to nop, packrl.ph or balign.
(validate_mips_insn): Add support for balign instruction.
(mips_ip): Handle DSP R2 instructions. Support balign instruction.
(OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
command line options.
(s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
(md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
* doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
.set dspr2, .set nodspr2.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips32-dspr2.s, gas/mips/mips32-dspr2.d: New test for
DSP R2.
* gas/mips/mips.exp: Run new test.
[ include/opcode/Changelog ]
* mips.h (OP_SH_BP, OP_MASK_BP): Add support for balign instruction.
(INSN_DSPR2): Add flag for DSP R2 instructions.
(M_BALIGN): New macro.
[ opcodes/ChangeLog ]
* mips-dis.c (mips_arch_choices): Add DSP R2 support.
(print_insn_args): Add support for balign instruction.
* mips-opc.c (D33): New shortcut for DSP R2 instructions.
(mips_builtin_opcodes): Add DSP R2 instructions.
[ sim/mips/ChangeLog ]
* Makefile.in (IGEN_INCLUDE): Add dsp2.igen.
* configure.ac (mips*-sde-elf*, mipsisa32r2*-*-*, mipsisa64r2*-*-*):
Add dsp2 to sim_igen_machine.
* configure: Regenerate.
* dsp.igen (do_ph_op): Add MUL support when op = 2.
(do_ph_mulq): New function to support mulq_rs.ph and mulq_s.ph.
(mulq_rs.ph): Use do_ph_mulq.
(MFHI, MFLO, MTHI, MTLO): Move these instructions to mips.igen.
* mips.igen: Add dsp2 model and include dsp2.igen.
(MFHI, MFLO, MTHI, MTLO): Extend these instructions for
for *mips32r2, *mips64r2, *dsp.
(MADD, MADDU, MSUB, MSUBU, MULT, MULTU): Extend these instructions
for *mips32r2, *mips64r2, *dsp2.
* dsp2.igen: New file for MIPS DSP REV 2 ASE.
[ sim/testsuite/sim/mips/ChangeLog ]
* basic.exp: Run the dsp2 test.
* utils-dsp.inc (dspckacc_astio, dspck_tsimm): New macro.
* mips32-dsp2.s: New test.
|
|
[ sim/mips/ChangeLog ]
* configure.ac (mips*-sde-elf*, mipsisa32r2*-*-*, mipsisa64r2*-*-*):
Add mdmx to sim_igen_machine.
(mipsisa64*-*-*): Likewise. Remove dsp.
(mipsisa32*-*-*): Remove dsp.
* configure: Regenerate.
[ sim/testsuite/sim/mips/ChangeLog ]
* basic.exp: Add case for mips*-sde-elf*.
(mdmxmodels): Run mdmx tests only on mdmx capable configurations.
|
|
|
|
|
|
|
|
patterns. Run DSP test only for DSP-capable ISAs. Check also mips32r2
and mips64r2 if supported by the target.
|
|
sim/cris/c/rtsigprocmask1.c, sim/cris/c/rtsigsuspend1.c,
sim/cris/c/sig7.c, sim/cris/c/sigreturn1.c,
sim/cris/c/sigreturn2.c, sim/cris/c/syscall1.c,
sim/cris/c/syscall2.c, sim/cris/c/sysctl2.c, sim/cris/c/fcntl1.c,
sim/cris/c/readlink2.c: Add code to print ENOSYS if syscall being
tested returns ENOSYS. Add early exit where needed. Change any
existing code to print "xyzzy", not "pass".
* sim/cris/asm/option3.ms, sim/cris/asm/option4.ms,
sim/cris/c/clone6.c, sim/cris/c/fcntl2.c,
sim/cris/c/mprotect2.c, sim/cris/c/readlink11.c,
sim/cris/c/rtsigprocmask2.c, sim/cris/c/rtsigsuspend2.c,
sim/cris/c/sig13.c, sim/cris/c/sigreturn3.c,
sim/cris/c/sigreturn4.c, sim/cris/c/syscall3.c,
sim/cris/c/syscall4.c, sim/cris/c/syscall5.c,
sim/cris/c/syscall6.c, sim/cris/c/syscall7.c,
sim/cris/c/syscall8.c, sim/cris/c/sysctl3.c: New tests.
|
|
(process): Don't write as much to the pipe as to trig the
inordinate-amount test in the sim pipe machinery. Correct test of
write return-value; check only that pipemax bytes were
successfully written. For error-case, emit strerror as well.
(main): Add a second read.
|
|
|
|
shrav_r.w.
|
|
|
|
* sim/cris/hw/rv-n-cris: New directory with tests.
|
|
(testr_h_dr, test_h_dr, ldmem_h_gr, mvr_h_mem): Ditto. Correct
syntax.
|