aboutsummaryrefslogtreecommitdiff
path: root/sim/sh64/configure
AgeCommit message (Collapse)AuthorFilesLines
2018-12-06sim/opcodes: Allow use of out of tree cgen source directoryAndrew Burgess1-5/+11
When configuring with '--enbale-cgen-maint' the default for both the opcodes/ and sim/ directories is to assume that the cgen source is within the binutils-gdb source tree as binutils-gdb/cgen/. In the old cvs days, this worked well, as cgen was just another sub-module of the single cvs repository and could easily be checked out within the binutils-gdb directory, and managed by cvs in the normal way. Now that binutils-gdb is in git, while cgen is still in cvs, placing the cgen respository within the binutils-gdb tree is more troublesome, and it would be nice if the two tools could be kept separate. Luckily there is already some initial code in the configure.ac files for both opcodes/ and sim/ to support having cgen be located outside of the binutils-gdb tree, however, this was speculative code written imagining a future where cgen would be built and installed to some location. Right now there is no install support for cgen, and so the configure code in opcodes/ and sim/ doesn't really do anything useful. In this commit I repurpose this code to allow binutils-gdb to be configured so that it can make use of a cgen source directory that is outside of the binutils-gdb tree. With this commit applied it is now possible to configure and build binutils-gdb like this: /path/to/binutils-gdb/src/configure --enable-cgen-maint=/path/to/cgen/src/cgen/ make all-opcodes make -C opcodes run-cgen-all Just in case anyone is still using cgen inside the binutils-gdb tree, I have left the default behaviour of '--enable-cgen-maint' (with no parameter) unchanged, that is it looks for the cgen directory as 'binutils-gdb/cgen/'. opcodes/ChangeLog: * configure.ac (enable-cgen-maint): Support passing path to cgen source tree. * configure: Regenerate. sim/ChangeLog: * common/acinclude.m4 (enable-cgen-maint): Support passing path to cgen source tree. * cris/configure: Regenerate. * frv/configure: Regenerate. * iq2000/configure: Regenerate. * lm32/configure: Regenerate. * m32r/configure: Regenerate. * or1k/configure: Regenerate. * sh64/configure: Regenerate.
2018-06-19Bump to autoconf 2.69 and automake 1.15.1Simon Marchi1-506/+568
When trying to run the update-gnulib.sh script in gdb, I get this: Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1. Aborting. Apparently, it's an issue with a regex in automake that triggers a warning starting with Perl 5.22. It has been fixed in automake 1.15.1. So I think it's a good excuse to bump the versions of autoconf and automake used in the gnulib import. And to avoid requiring multiple builds of autoconf/automake, it was suggested that we bump the required version of those tools for all binutils-gdb. For autoconf, the 2.69 version is universally available, so it's an easy choice. For automake, different distros and distro versions have different automake versions. But 1.15.1 seems to be the most readily available as a package. In any case, it's easy to build it from source. I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ, because I don't think they are useful in our case. They only specify a lower bound for the acceptable version of automake/autoconf. That's useful if you let the user choose the version of the tool they want to use, but want to set a minimum version (because you use a feature that was introduced in that version). In our case, we force people to use a specific version anyway. For the autoconf version, we have the check in config/override.m4 that enforces the version we want. It will be one less thing to update next time we change autotools version. I hit a few categories of problems that required some changes. They are described below along with the chosen solutions. Problem 1: configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation Solution 1: Adjust the code based on the example at that URL. Problem 2 (in zlib/): Makefile.am: error: required file './INSTALL' not found Makefile.am: 'automake --add-missing' can install 'INSTALL' Makefile.am: error: required file './NEWS' not found Makefile.am: error: required file './AUTHORS' not found Makefile.am: error: required file './COPYING' not found Makefile.am: 'automake --add-missing' can install 'COPYING' Solution 2: Add the foreign option to AUTOMAKE_OPTIONS. Problem 3: doc/Makefile.am:20: error: support for Cygnus-style trees has been removed Solution 3: Remove the cygnus options. Problem 4: Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') Solution 4: Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is already defined earlier). Problem 5: doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 5: Rename .texinfo files to .texi. Problem 6: doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 6: Remove the hack at the bottom of doc/Makefile.am and use the info-in-builddir automake option. Problem 7: doc/Makefile.am:35: error: required file '../texinfo.tex' not found doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex' Solution 7: Use the no-texinfo.tex automake option. We also have one in texinfo/texinfo.tex, not sure if we should point to that, or move it (or a newer version of it added with automake --add-missing) to top-level. Problem 8: Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory, Makefile.am:131: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. Solution 8: Use subdir-objects, that means adjusting references to some .o that will now be in config/. Problem 9: configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... ../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from... ../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from... ../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from... ../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from... configure.ac:375: the top level Solution 9: Use AC_LANG_SOURCE, or use proper quoting. Problem 10 (in intl/): configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS /usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from... /usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from... /usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from... /usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from... /usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from... /usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from... /usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from... configure.ac:7: the top level Solution 10: Add AC_USE_SYSTEM_EXTENSIONS in configure.ac. ChangeLog: * libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * README-maintainer-mode: Update version requirements. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. bfd/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. (INCLUDES): Rename to ... (AM_CPPFLAGS): ... this. * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add info-in-builddir no-texinfo.tex. (info_TEXINFOS): Rename bfd.texinfo to bfd.texi. * doc/bfd.texinfo: Rename to ... * doc/bfd.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. binutils/ChangeLog: * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add info-in-builddir no-texinfo.tex. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. config/ChangeLog: * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. etc/ChangeLog: * configure.in: Remove AC_PREREQ. * configure: Re-generate. gas/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects. (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix. * configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles, extra_objects): Add config/ prefix. * doc/as.texinfo: Rename to... * doc/as.texi: ... this. * doc/Makefile.am: Rename as.texinfo to as.texi throughout. Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gdb/ChangeLog: * common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION, PACKAGE_STRING, PACKAGE_TARNAME): Undefine. * configure.ac: Remove AC_PREREQ, add missing quoting. * gnulib/configure.ac: Modernize usage of AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ. * gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69. (AUTOMAKE_VERSION): Bump to 1.15.1. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. * gnulib/aclocal.m4: Re-generate. * gnulib/config.in: Re-generate. * gnulib/configure: Re-generate. * gnulib/import/Makefile.in: Re-generate. gdb/gdbserver/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. gdb/testsuite/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. gold/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting and usage of AC_LANG_SOURCE. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * testsuite/Makefile.in: Re-generate. gprof/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * gconfig.in: Re-generate. intl/ChangeLog: * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. ld/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. (AUTOMAKE_OPTIONS): Add info-in-builddir. * README: Rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. * gen-doc.texi: Likewise. * h8-doc.texi: Likewise. * ld.texinfo: Rename to ... * ld.texi: ... this. * ldint.texinfo: Rename to ... * ldint.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. libdecnumber/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libiberty/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. opcodes/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. * configure.ac: Remove AC_PREREQ. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. readline/ChangeLog.gdb: * configure: Re-generate. * examples/rlfe/configure: Re-generate. sim/ChangeLog: * All configure.ac: Remove AC_PREREQ. * All configure: Re-generate. zlib/ChangeLog.bin-gdb: * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate.
2018-06-18config: Sync with GCCSimon Marchi1-14/+18
... and re-generate all possible configure files, since they may depend on things in config/. config/ChangeLog: Sync with GCC 2018-06-08 Martin Liska <mliska@suse.cz> * bootstrap-mpx.mk: Remove. 2018-05-10 Martin Liska <mliska@suse.cz> PR bootstrap/64914 * bootstrap-ubsan.mk: Define UBSAN_BOOTSTRAP. 2018-05-09 Joshua Watt <jpewhacker@gmail.com> * ax_pthread.m4: Add file. 2018-05-08 Richard Biener <rguenther@suse.de> PR bootstrap/85571 * bootstrap-lto-noplugin.mk: Disable compare. * bootstrap-lto.mk: Supply contrib/compare-lto for do-compare. 2018-04-24 H.J. Lu <hongjiu.lu@intel.com> PR bootstrap/85490 * bootstrap-cet.mk (STAGE4_CFLAGS): New. 2018-04-24 H.J. Lu <hongjiu.lu@intel.com> PR target/85485 * bootstrap-cet.mk (STAGE2_CFLAGS): Remove -mcet. (STAGE3_CFLAGS): Likewise. 2018-04-24 H.J. Lu <hongjiu.lu@intel.com> PR target/85485 * cet.m4 (GCC_CET_FLAGS): Replace -mcet with -mshstk. 2018-04-19 Jakub Jelinek <jakub@redhat.com> * cet.m4 (GCC_CET_FLAGS): Default to --disable-cet, replace --enable-cet=default with --enable-cet=auto. 2018-04-18 David Malcolm <dmalcolm@redhat.com> PR jit/85384 * acx.m4 (GCC_BASE_VER): Remove \$\$ from sed expression.
2017-09-06Honor an existing CC_FOR_BUILD in the environment for sim.John Baldwin1-7/+11
This matches the equivalent bits in bfd/acinclude.m4 sim/ChangeLog: * configure.ac: Honor existing CC_FOR_BUILD in environment. * configure: Regenerate. sim/aarch64/ChangeLog: * configure: Regenerate. sim/arm/ChangeLog: * configure: Regenerate. sim/avr/ChangeLog: * configure: Regenerate. sim/bfin/ChangeLog: * configure: Regenerate. sim/common/ChangeLog: * acinclude.m4 (SIM_AC_COMMON) Honor existing CC_FOR_BUILD in environment. sim/cr16/ChangeLog: * configure: Regenerate. sim/cris/ChangeLog: * configure: Regenerate. sim/d10v/ChangeLog: * configure: Regenerate. sim/erc32/ChangeLog: * configure: Regenerate. sim/frv/ChangeLog: * configure: Regenerate. sim/ft32/ChangeLog: * configure: Regenerate. sim/h8300/ChangeLog: * configure: Regenerate. sim/iq2000/ChangeLog: * configure: Regenerate. sim/lm32/ChangeLog: * configure: Regenerate. sim/m32c/ChangeLog: * configure: Regenerate. sim/m32r/ChangeLog: * configure: Regenerate. sim/m68hc11/ChangeLog: * configure: Regenerate. sim/mcore/ChangeLog: * configure: Regenerate. sim/microblaze/ChangeLog: * configure: Regenerate. sim/mips/ChangeLog: * configure: Regenerate. sim/mn10300/ChangeLog: * configure: Regenerate. sim/moxie/ChangeLog: * configure: Regenerate. sim/msp430/ChangeLog: * configure: Regenerate. sim/rl78/ChangeLog: * configure: Regenerate. sim/rx/ChangeLog: * configure: Regenerate. sim/sh/ChangeLog: * configure: Regenerate. sim/sh64/ChangeLog: * configure: Regenerate. sim/v850/ChangeLog: * configure: Regenerate.
2016-01-10sim: move many common settings from CPPFLAGS to config.hMike Frysinger1-68/+96
Rather than stuffing the command line with a bunch of -D flags, start moving things to config.h which is managed by autoheader. This makes the makefile a bit simpler and the build output tighter, and it makes the migration to automake easier as there are fewer vars to juggle. We'll want to move the other options out too, but it'll take more work.
2016-01-10sim: drop unused SIM_AC_OPTION_PACKAGESMike Frysinger1-7/+2
This was imported from the ppc sim, but that was only used to control a single file, and that is already governed by the hw models. There's no need to have a sep configure option here, especially since none of the other sims are using it. Even when the code is enabled, there's no runtime overhead.
2016-01-10sim: allow the environment configure option everywhereMike Frysinger1-22/+22
Currently ports have to call SIM_AC_OPTION_ENVIRONMENT explicitly in order to make the configure flag available. There's no real reason to not allow this flag for all ports, so move it to the common sim macro. This way we get standard behavior across all ports too.
2016-01-10sim: allow the assert configure option everywhereMike Frysinger1-2/+19
Currently ports have to call SIM_AC_OPTION_ASSERT explicitly in order to make the configure flag available, which none of them do. There's no real reason to not allow this flag for all ports, so move it to the common sim macro. This way we get standard behavior across all ports.
2016-01-10sim: drop targ-vals.def->nltvals.def indirectionMike Frysinger1-57/+1
We don't have alternative nltvals.def files, so always symlinking the targ-vals.def file to it doesn't gain us anything. It does make the build more complicated though and a pain to convert to something newer (like automake). Drop the symlinking entirely. In the future, we'll want to explode this file anyways into the respective arch dirs so things can be selected dynamically at runtime, so it's not like we'll be bringing this back.
2016-01-10sim: allow the inline configure option everywhereMike Frysinger1-50/+36
Currently ports have to call SIM_AC_OPTION_INLINE explicitly in order to make the configure flag available. There's no real reason to not allow this flag for all ports, so move it to the common sim macro. This way we get standard behavior across all ports too.
2016-01-10sim: drop --enable-sim-{regparm,stdcall} optionsMike Frysinger1-12/+2
These options were never exposed for most sims (just the ppc one), and they are really only useful on 32-bit x86 systems. Considering modern systems tend to be 64-bit x86_64 and how well modern compilers are at optimizing code, these have outlived their usefulness.
2016-01-10sim: drop --enable-sim-cflags optionMike Frysinger1-23/+2
No other sub directory provides such a configuration option, so drop it from the sim dir as well. This cleans up a good bit of code in the process. If people want to use custom flags for just the sim, they can still run configure+make by hand in the sim subdir and use the normal CFLAGS settings.
2016-01-09sim: drop common/cconfig.h in favor of a single config.hMike Frysinger1-3/+336
The common subdir sets up a cconfig.h file to hold checks for the common code. In practice, most files still end up using config.h instead which just leads to confusion. Merge all the configure checks that went into cconfig.h into SIM_AC_COMMON so we can drop the cconfig.h file altogether. Now there is only a single config.h file like normal.
2016-01-04sim: punt x86-specific bswap logicMike Frysinger1-21/+2
The compiler/C library should produce reasonable code for htonl/ntohl, and at least glibc tries pretty hard to always produce good code for them. This logic only had support for 32-bit x86 systems anymore, and it's unlikely people were even opting into this, so drop it all.
2016-01-03sim: drop host endian configure optionMike Frysinger1-260/+227
The --enable-sim-hostendian flag was purely so people had an escape route for when cross-compiling. This is because historically, AC_C_BIGENDIAN did not work in those cases. That was fixed a while ago though, so we can require that macro everywhere now and simplify a good bit of code.
2016-01-03sim: convert to bfd_endianMike Frysinger1-18/+18
Rather than re-invent endian defines, as well as maintain our own list of OS & arch-specific includes, punt all that logic in favor of the bfd ones already set up and maintained elsewhere. We already rely on the bfd library, so leveraging the endian aspect should be fine.
2015-12-26sim: punt WITH_DEVICES & tconfig.h supportMike Frysinger1-4/+2
No arch is using this anymore, and we want all new ports using the hardware framework instead. Punt WITH_DEVICES and the two callbacks device_io_{read,write}_buffer. We can also punt the tconfig.h file as no port is using it anymore. This fixes in-tree builds that get confused by picking up the wrong one (common/ vs <port>/) caused by commit ae7d0cac8ce971f7108d270c. Any port that needs to set up a global define can use their own sim-main.h file that they must provide regardless.
2015-06-23sim: use AS_HELP_STRING everywhereMike Frysinger1-16/+29
This helps standardize the configure --help output.
2015-06-12sim: update configure.in->configure.ac docsMike Frysinger1-1/+1
A few places still refer to the configure.in file; update them.
2015-06-12sim: drop -DTRACE from configureMike Frysinger1-3/+3
No code uses this anymore and the symbol conflicts with the new TRACE helper. Punt it from configure.
2015-04-13sim: fix the PKGVERSION defineMike Frysinger1-2/+2
This should be SIM, not GDB.
2015-04-02Regenerate configure in simH.J. Lu1-2/+2
* arm/configure: Regenerated. * avr/configure: Likewise. * bfin/configure: Likewise. * common/configure: Likewise. * cr16/configure: Likewise. * cris/configure: Likewise. * d10v/configure: Likewise. * erc32/configure: Likewise. * frv/configure: Likewise. * ft32/configure: Likewise. * h8300/configure: Likewise. * igen/configure: Likewise. * iq2000/configure: Likewise. * lm32/configure: Likewise. * m32c/configure: Likewise. * m32r/configure: Likewise. * m68hc11/configure: Likewise. * mcore/configure: Likewise. * microblaze/configure: Likewise. * mips/configure: Likewise. * mn10300/configure: Likewise. * moxie/configure: Likewise. * msp430/configure: Likewise. * ppc/configure: Likewise. * rl78/configure: Likewise. * rx/configure: Likewise. * sh/configure: Likewise. * sh64/configure: Likewise. * v850/configure: Likewise.
2015-04-01Regenerate configure in simH.J. Lu1-4/+6
* arm/configure: Regenerated. * avr/configure: Likewise. * bfin/configure: Likewise. * common/configure: Likewise. * cr16/configure: Likewise. * cris/configure: Likewise. * d10v/configure: Likewise. * erc32/configure: Likewise. * frv/configure: Likewise. * ft32/configure: Likewise. * h8300/configure: Likewise. * igen/configure: Likewise. * iq2000/configure: Likewise. * lm32/configure: Likewise. * m32c/configure: Likewise. * m32r/configure: Likewise. * m68hc11/configure: Likewise. * mcore/configure: Likewise. * microblaze/configure: Likewise. * mips/configure: Likewise. * mn10300/configure: Likewise. * moxie/configure: Likewise. * msp430/configure: Likewise. * ppc/configure: Likewise. * rl78/configure: Likewise. * rx/configure: Likewise. * sh/configure: Likewise. * sh64/configure: Likewise. * v850/configure: Likewise.
2015-04-01sim: update zlib handlingMike Frysinger1-81/+13
With zlib being mandatory, and the updated m4 configs, we need to regen and use the new settings w/bfd to avoid linkage errors.
2015-03-24sim: Revert "Fix frv/iq2000/m32r/sh64 sim, default hardware to off."Mike Frysinger1-2/+1
This partially reverts commits: 105dd264de9a2fa7eee45eff897aa1d6171c1c4b 3df3af7c3f9095f9dc951fe680ce76f6e497914b c4892a6b37647a0b33a2113b59762f678aabe4b2 9e3042ec073e05a0a5aa56398fd2662c5dcd5002 Now that dv-sockser is handled entirely by the common build logic, the failure these targets were hitting isn't really possible anymore. Lets reset their hardware status back to defaulting to on. Some of these were set to "always" previously, but we don't support that anymore.
2015-03-24sim: fix sim-hardware configure optionMike Frysinger1-6/+2
The current default handling for the --enable-sim-hardware option ends up forcing the value to whatever is set as the first argument when calling the macro (by virtue of how autoconf works). Relocate the setup code to the 4th parameter of the AC_ARG_ENABLE macro to fix it. This was caused by the simplification work in 1517bd274290e06af498ef7e49. Reported-by: Hans-Peter Nilsson <hans-peter.nilsson@axis.com>
2015-03-23sim: drop support for requiring hw supportMike Frysinger1-10/+5
Since no sim is using the "always" option to SIM_AC_OPTION_HARDWARE, and we don't want to require hw support to always be enabled, drop the option. This leads to a slight simplification in the macro too as we can collapse the sim_hw_p variable.
2015-03-23sim: dv-sockser: move build to common dirMike Frysinger1-6/+6
If dv-sockser is available, lets add it to the common SIM_HW_OBJS variable so it is always included automatically. Now ports do not have to shoe horn it in directly themselves. It does mean it will be compiled for targets that don't explicitly use it, but that's really what we want anyways.
2015-03-16sim: rename tconfig.in to tconfig.hMike Frysinger1-12/+6
Rather than manually include tconfig.h when we think we'll need it (which is error prone as it can define symbols we expect from config.h), have it be included directly by config.h. Since we know we have to include that header everywhere already, this will make sure tconfig.h isn't missed. It should also be fine as tconfig.h is supposed to be simple and only set up a few core defines for the target. This allows us to stop symlinking it in place all the time and just use it straight out of the respective source directory.
2014-08-23Fix sh64-elf sim, default hardware to off.Hans-Peter Nilsson1-8/+2
See nearby (previous) commit for the iq2000 sim; this similarly fails at the dv_sockser_install declaration in sim/sh64/tconfig.in. I'm disabling simulator hardware to be consistent with the state before 94c63d78f (2013-03-23) and with the actions for the frv sim and the iq2000 sim. Make check-sim for sh64-elf shows no regressions (25 failures; 357 expected passes) compared to bf3d9781ec049 (before the recent config.in regen, after sim-hardware mostly-enabled) and eed23bb4a1 (before the sim-hardware mostly-enabled; 2013-03-23). sim/sh64: * configure.ac: Default simulator hardware to off again without emitting errors when off or dv-sockser.o unavailable. * configure: Regenerate.
2014-08-19Fix --diable-shared --enable-plugins build breakageAlan Modra1-2/+60
Directories that don't use libtool need to add -ldl (on most *nix hosts) to provide dlopen for libbfd. config/ * plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to LIBS via AC_SEARCH_LIBS. gdb/ * acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl. * config.in: Regenerate. sim/ppc/ * configure.ac: Invoke AC_PLUGINS. * config.in: Regenerate. and regen lots of configure files.
2014-08-15Regenerate sim configury.Roland McGrath1-9/+40
2013-09-23Regenerate sim configure files to pick up support for powerpc64le inAlan Modra1-5/+11
libtool.m4.
2013-06-05sim: use AM_MAINTAINER_MODEMike Frysinger1-13/+28
I noticed the sim code is using an old implementation of the maintainer logic. I cut it over to the new macro (like gdb has been doing). In practice, it makes no difference currently as nothing in the sim tree uses it, but I have a follow up commit for the Blackfin tree that needs it.
2013-03-26sim: rewrite SIM_AC_OPTION_HARDWARE a bit to simplify thingsMike Frysinger1-31/+26
There's no need to put the majority of the logic into the 3rd arg of the AC_ARG_ENABLE. Coupled with the lack of indentation, it makes it hard to follow, error prone to update, and duplicates code (with the 4th arg). So pull the logic out of the 3rd arg and outside of the AC_ARG_ENABLE macro. This allows us to gut the 4th arg entirely, merge with the code that followed the macro, and fix bugs related to the new dv-sockser in the process. Hopefully building the various sims with the default sim-hardware settings, as well as with explicit --{dis,en}able-sim-hardware flags, should all just work now.
2013-03-232013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>Joel Sherrill1-2/+134
* configure.ac: Fail if dv-sockser.o not available. Error when --disable-sim-hardware is specified. * configure: Regenerated.
2012-11-20Fix sim build when configured with --enable-pluginsH.J. Lu1-1/+8960
* common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS condition. * common/acinclude.m4: Define lt_cv_dlopen_libs. * arm/configure: Regenerate. * avr/configure: Regenerate. * bfin/configure: Regenerate. * common/configure: Regenerate. * cr16/configure: Regenerate. * cris/configure: Regenerate. * d10v/configure: Regenerate. * erc32/configure: Regenerate. * frv/configure: Regenerate. * h8300/configure: Regenerate. * igen/configure: Regenerate. * iq2000/configure: Regenerate. * lm32/configure: Regenerate. * m32c/configure: Regenerate. * m32r/configure: Regenerate. * m68hc11/configure: Regenerate. * mcore/configure: Regenerate. * microblaze/configure: Regenerate. * mips/configure: Regenerate. * mn10300/configure: Regenerate. * moxie/configure: Regenerate. * ppc/configure: Regenerate. * rl78/configure: Regenerate. * rx/configure: Regenerate. * sh/configure: Regenerate. * sh64/configure: Regenerate. * testsuite/configure: Regenerate. * v850/configure: Regenerate.
2012-06-15Define PACKAGE macro in all sims' config.h.Joel Brobecker1-0/+12
Some of the common includes in include/gdb such as callback.h include bfd.h. But there was a recent change in bfd-in.h to require that config.h be included before bfd.h can be included: /* PR 14072: Ensure that config.h is included first. */ #if !defined PACKAGE && !defined PACKAGE_VERSION #error config.h must be included before this header #endif PACKAGE_VERSION is always defined by default by the AC_INIT autoconf macro, but PACKAGE isn't. This patch updates the SIM_AC_COMMON macro to define it, and then regenerates all configure scripts and config.in files. sim/common/changeLog: * acinclude.m4 (SIM_AC_COMMON): Define PACKAGE. * config.in, configure: Regenerate. sim/ChangeLog: * configure: Regenerate. sim/arm/ChangeLog: * config.in, configure: Regenerate. sim/avr/ChangeLog: * config.in, configure: Regenerate. sim/bfin/ChangeLog: * config.in, configure: Regenerate. sim/cr16/ChangeLog: * config.in, configure: Regenerate. sim/cris/ChangeLog: * config.in, configure: Regenerate. sim/d10v/ChangeLog: * config.in, configure: Regenerate. sim/erc32/ChangeLog: * config.in, configure: Regenerate. sim/frv/ChangeLog: * config.in, configure: Regenerate. sim/h8300/ChangeLog: * config.in, configure: Regenerate. sim/iq2000/ChangeLog: * config.in, configure: Regenerate. sim/lm32/ChangeLog: * config.in, configure: Regenerate. sim/m32c/ChangeLog: * config.in, configure: Regenerate. sim/m32r/ChangeLog: * config.in, configure: Regenerate. sim/m68hc11/ChangeLog: * config.in, configure: Regenerate. sim/mcore/ChangeLog: * config.in, configure: Regenerate. sim/microblaze/ChangeLog: * config.in, configure: Regenerate. sim/mips/ChangeLog: * config.in, configure: Regenerate. sim/mn10300/ChangeLog: * config.in, configure: Regenerate. sim/moxie/ChangeLog: * config.in, configure: Regenerate. sim/ppc/ChangeLog: * configure: Regenerate. sim/rl78/ChangeLog: * config.in, configure: Regenerate. sim/rx/ChangeLog: * config.in, configure: Regenerate. sim/sh/ChangeLog: * config.in, configure: Regenerate. sim/sh64/ChangeLog: * config.in, configure: Regenerate. sim/v850/ChangeLog: * config.in, configure: Regenerate. sim/testsuite/ChangeLog: * configure: Regenerate.
2012-03-24[PATCH] sim: make sure to include strsignal prototypeMike Frysinger1-121/+183
Before POSIX standardized strsignal(), old systems would hide the prototype unless the normal extension defines were enabled. So use the AC_USE_SYSTEM_EXTENSIONS helper for that. Then make sure we include string.h ourselves in nrun.c rather than relying on implicit includes via other sim headers. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-12-03sim: generate build dependencies on the flyMike Frysinger1-0/+225
Lift the code that GDB is using to generate dependencies on the fly and port it over to the sim. Now people shouldn't have to manually maintain these in their Makefile's. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-18sim: move from common.m4 to SIM_AC_COMMONMike Frysinger1-359/+352
Now that the sourceware tree generally requires autoconf-2.64, update the sim tree to require that too. This allows us to drop the long standing SIM_AC_COMMON/common.m4 workaround as autoconf 2.64+ seems to work for me. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-09Sync Libtool from GCC.Ralf Wildenhues1-1/+1
/: * libtool.m4: Sync from git Libtool. * ltmain.sh: Likewise. * ltoptions.m4: Likewise. * ltversion.m4: Likewise. * lt~obsolete.m4: Likewise. sim/iq2000/: * configure: Regenerate. sim/d10v/: * configure: Regenerate. sim/m32r/: * configure: Regenerate. sim/frv/: * configure: Regenerate. sim/: * avr/configure: Regenerate. * cris/configure: Regenerate. * microblaze/configure: Regenerate. sim/h8300/: * configure: Regenerate. sim/mn10300/: * configure: Regenerate. sim/erc32/: * configure: Regenerate. sim/arm/: * configure: Regenerate. sim/m68hc11/: * configure: Regenerate. sim/lm32/: * configure: Regenerate. sim/sh64/: * configure: Regenerate. sim/v850/: * configure: Regenerate. sim/cr16/: * configure: Regenerate. sim/moxie/: * configure: Regenerate. sim/m32c/: * configure: Regenerate. sim/mips/: * configure: Regenerate. sim/mcore/: * configure: Regenerate. sim/sh/: * configure: Regenerate. gprof/: * Makefile.in: Regenerate. * configure: Regenerate. opcodes/: * Makefile.in: Regenerate. * configure: Regenerate. gas/: * Makefile.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. ld/: * configure: Regenerate. gdb/testsuite/: * gdb.cell/configure: Regenerate. binutils/: * Makefile.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. bfd/: * Makefile.in: Regenerate. * configure: Regenerate. bfd/doc/: * Makefile.in: Regenerate.
2009-11-24 * common/aclocal.m4: Add include of ../../config/zlib.m4.Joel Brobecker1-2/+24
* common/common.m4: Use AM_ZLIB to check for zlib support. * ppc/configure.ac: Likewise. * arm/configure, avr/configure, common/configure, cr16/configure, cris/configure, d10v/configure, erc32/configure, frv/configure, h8300/configure, iq2000/configure, lm32/configure, m32c/configure, m32r/configure, m68hc11/configure, mcore/configure, microblaze/configure, mips/configure, mn10300/configure, moxie/configure, ppc/configure, sh/configure, sh64/configure, v850/configure: Regenerate.
2009-08-22Regenerate tree using Autoconf 2.64 and Automake 1.11.Ralf Wildenhues1-3973/+3458
config/: * override.m4 (_GCC_AUTOCONF_VERSION): Bump to 2.64. /: * configure: Regenerate. etc/: * configure: Regenerate. sim/common/: * config.in: Regenerate. * configure: Likewise. sim/iq2000/: * config.in: Regenerate. * configure: Likewise. sim/d10v/: * config.in: Regenerate. * configure: Likewise. sim/igen/: * config.in: Regenerate. * configure: Likewise. sim/m32r/: * config.in: Regenerate. * configure: Likewise. sim/frv/: * config.in: Regenerate. * configure: Likewise. sim/: * avr/config.in: Regenerate. * avr/configure: Likewise. * configure: Likewise. * cris/config.in: Likewise. * cris/configure: Likewise. sim/h8300/: * config.in: Regenerate. * configure: Likewise. sim/mn10300/: * config.in: Regenerate. * configure: Likewise. sim/ppc/: * config.in: Regenerate. * configure: Likewise. sim/erc32/: * config.in: Regenerate. * configure: Likewise. sim/arm/: * config.in: Regenerate. * configure: Likewise. sim/m68hc11/: * config.in: Regenerate. * configure: Likewise. sim/lm32/: * config.in: Regenerate. * configure: Likewise. sim/sh64/: * config.in: Regenerate. * configure: Likewise. sim/v850/: * config.in: Regenerate. * configure: Likewise. sim/cr16/: * config.in: Regenerate. * configure: Likewise. sim/moxie/: * config.in: Regenerate. * configure: Likewise. sim/m32c/: * config.in: Regenerate. * configure: Likewise. sim/mips/: * config.in: Regenerate. * configure: Likewise. sim/mcore/: * config.in: Regenerate. * configure: Likewise. sim/testsuite/d10v-elf/: * configure: Regenerate. sim/testsuite/: * configure: Regenerate. sim/testsuite/frv-elf/: * configure: Regenerate. sim/testsuite/m32r-elf/: * configure: Regenerate. sim/testsuite/mips64el-elf/: * configure: Regenerate. sim/sh/: * config.in: Regenerate. * configure: Likewise. gold/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. * testsuite/Makefile.in: Likewise. gprof/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * configure: Likewise. * gconfig.in: Likewise. opcodes/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. gas/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. * doc/Makefile.in: Likewise. ld/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. gdb/: * aclocal.m4: Regenerate. * config.in: Likewise. * configure: Likewise. * gnulib/Makefile.in: Likewise. gdb/doc/: * configure: Regenerate. gdb/gdbserver/: * aclocal.m4: Regenerate. * config.in: Likewise. * configure: Likewise. gdb/testsuite/: * configure: Regenerate. * gdb.hp/configure: Likewise. * gdb.hp/gdb.aCC/configure: Likewise. * gdb.hp/gdb.base-hp/configure: Likewise. * gdb.hp/gdb.compat/configure: Likewise. * gdb.hp/gdb.defects/configure: Likewise. * gdb.hp/gdb.objdbg/configure: Likewise. * gdb.stabs/configure: Likewise. binutils/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. * doc/Makefile.in: Likewise. bfd/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. bfd/doc/: * Makefile.in: Regenerate. readline/: * configure: Regenerate. readline/examples/rlfe/: * configure: Regenerate.
2009-08-22Fixup readline and sim including of override.m4Ralf Wildenhues1-10/+85
readline/examples/rlfe/: * configure.in: m4_include toplevel config/override.m4. * configure: Regenerate. readline/ChangeLog.gdb: * configure.in: m4_include toplevel config/override.m4. * configure: Regenerate. sim/: * configure.ac: m4_include toplevel config/override.m4. * configure: Regenerate. * avr/configure: Regenerate. * cris/configure: Regenerate. sim/common/: * aclocal.m4: m4_include toplevel config/override.m4. * configure: Regenerate. sim/iq2000/: * configure: Regenerate. sim/d10v/: * configure: Regenerate. sim/igen/: * configure: Regenerate. sim/m32r/: * configure: Regenerate. sim/frv/: * configure: Regenerate. sim/h8300/: * configure: Regenerate. sim/mn10300/: * configure: Regenerate. sim/ppc/: * configure: Regenerate. sim/erc32/: * configure: Regenerate. sim/arm/: * configure: Regenerate. sim/m68hc11/: * configure: Regenerate. sim/lm32/: * configure: Regenerate. sim/sh64/: * configure: Regenerate. sim/v850/: * configure: Regenerate. sim/cr16/: * configure: Regenerate. sim/moxie/: * configure: Regenerate. sim/m32c/: * configure: Regenerate. sim/mips/: * configure: Regenerate. sim/mcore/: * configure: Regenerate. sim/sh/: * configure: Regenerate.
2008-07-11 * configure: Regenerate to track ../common/common.m4 changes.Hans-Peter Nilsson1-0/+278
* config.in: Ditto.
2008-06-07sim:Joseph Myers1-1/+173
2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * cris/configure: Regenerate. sim/common: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * aclocal.m4: Include ../../config/acx.m4. * common.m4: Use ACX_PKGVERSION and ACX_BUGURL. * configure, config.in: Regenerate. * Make-common.in (LIB_OBJS): Add version.o. (version.c, version.o): New rules. * run.c: Include version.h. (usage): Add help parameter. Print output either to stdout or stderr depending on that parameter. (print_version): New. (main): Check for --help and --version. * run-sim.h (sim_target_display_usage): Add help parameter. * version.h: New. sim/arm: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. * wrapper.c (sim_target_display_usage): Add help parameter. sim/cr16: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/d10v: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/erc32: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/frv: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/h8300: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/iq2000: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/m32c: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/m32r: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/m68hc11: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/mcore: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/mips: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/mn10300: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/ppc: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure.ac: Use ACX_PKGVERSION and ACX_BUGURL. * configure, config.in: Regenerated. * Makefile.in (LIB_OBJ): Add version.o. (version.c, version.o): New rules. * psim.c (psim_usage): Add help parameter. Print the bug URL. Exit with code 0 for help. (psim_options): Update calls to psim_usage. Handle --help and --version. * psim.h (psim_usage): Update prototype. * main.c (main): Update psim_usage call. sim/sh: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/sh64: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/v850: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate.
2006-12-21 * config.in, configure: Regenerate.Hans-Peter Nilsson1-2/+3
2006-06-05common/Daniel Jacobowitz1-2/+84
* aclocal.m4: Use ZW_GNU_GETTEXT_SISTER_DIR. most subdirs/ * configure: Regenerated.
2006-05-31Configury changes: update src repository (binutils, gdb, and rda) to useDaniel Jacobowitz1-2789/+13
config/gettext-sister.m4 instead of the old gettext.m4. Regenerate all affected autotools files. Include intl in gdb releases again.
generated by cgit v1.1 at 2024-11-27 17:35:01 +0000