aboutsummaryrefslogtreecommitdiff
path: root/sim/or1k
AgeCommit message (Collapse)AuthorFilesLines
2020-01-01Update copyright year range in all GDB files.Joel Brobecker17-17/+17
gdb/ChangeLog: Update copyright year range in all GDB files.
2019-06-13sim/or1k: Regenerate simStafford Horne10-179/+2978
This picks up changes for: - new orfpx64a32 spec - new unordered instructions - documentation and symbol updates sim/ChangeLog: * or1k/cpu.c: Regenerate. * or1k/cpu.h: Regenerate. * or1k/decode.c: Regenerate. * or1k/decode.h: Regenerate. * or1k/model.c: Regenerate. * or1k/sem-switch.c: Regenerate. * or1k/sem.c: Regenerate.
2019-01-01Update copyright year range in all GDB files.Joel Brobecker17-17/+17
This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files.
2018-12-06sim/opcodes: Allow use of out of tree cgen source directoryAndrew Burgess1-5/+11
When configuring with '--enbale-cgen-maint' the default for both the opcodes/ and sim/ directories is to assume that the cgen source is within the binutils-gdb source tree as binutils-gdb/cgen/. In the old cvs days, this worked well, as cgen was just another sub-module of the single cvs repository and could easily be checked out within the binutils-gdb directory, and managed by cvs in the normal way. Now that binutils-gdb is in git, while cgen is still in cvs, placing the cgen respository within the binutils-gdb tree is more troublesome, and it would be nice if the two tools could be kept separate. Luckily there is already some initial code in the configure.ac files for both opcodes/ and sim/ to support having cgen be located outside of the binutils-gdb tree, however, this was speculative code written imagining a future where cgen would be built and installed to some location. Right now there is no install support for cgen, and so the configure code in opcodes/ and sim/ doesn't really do anything useful. In this commit I repurpose this code to allow binutils-gdb to be configured so that it can make use of a cgen source directory that is outside of the binutils-gdb tree. With this commit applied it is now possible to configure and build binutils-gdb like this: /path/to/binutils-gdb/src/configure --enable-cgen-maint=/path/to/cgen/src/cgen/ make all-opcodes make -C opcodes run-cgen-all Just in case anyone is still using cgen inside the binutils-gdb tree, I have left the default behaviour of '--enable-cgen-maint' (with no parameter) unchanged, that is it looks for the cgen directory as 'binutils-gdb/cgen/'. opcodes/ChangeLog: * configure.ac (enable-cgen-maint): Support passing path to cgen source tree. * configure: Regenerate. sim/ChangeLog: * common/acinclude.m4 (enable-cgen-maint): Support passing path to cgen source tree. * cris/configure: Regenerate. * frv/configure: Regenerate. * iq2000/configure: Regenerate. * lm32/configure: Regenerate. * m32r/configure: Regenerate. * or1k/configure: Regenerate. * sh64/configure: Regenerate.
2018-10-05or1k: Add the l.muld, l.muldu, l.macu, l.msbu insnsRichard Henderson6-168/+945
Also fix the incorrect definitions of multiply and divide carry and overflow float. Changes to the instructions are made in the .cpu file, then we regenerate the binutils and sim files. The changes also required a few fixups for tests and additional sim helpers. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1korbis.cpu (insn-opcode-mac): Add opcodes for MACU and MSBU. (insn-opcode-alu-regreg): Add opcodes for MULD and MULDU. (l-mul): Fix overflow support and indentation. (l-mulu): Fix overflow support and indentation. (l-muld, l-muldu, l-msbu, l-macu): New instructions. (l-div); Remove incorrect carry behavior. (l-divu): Fix carry and overflow behavior. (l-mac): Add overflow support. (l-msb, l-msbu): Add carry and overflow support. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1k-desc.c: Regenerate. * or1k-desc.h: Regenerate. * or1k-opc.c: Regenerate. * or1k-opc.h: Regenerate. * or1k-opinst.c: Regenerate. sim/common/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * cgen-ops.h (ADDCFDI): New function, add carry flag DI variant. (ADDOFDI): New function, add overflow flag DI variant. (SUBCFDI): New function, subtract carry flag DI variant. (SUBOFDI): New function, subtract overflow flag DI variant. sim/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * or1k/cpu.h: Regenerate. * or1k/decode.c: Regenerate. * or1k/decode.h: Regenerate. * or1k/model.c: Regenerate. * or1k/sem-switch.c: Regenerate. * or1k/sem.c: Regenerate: sim/testsuite/sim/or1k/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * div.S: Fix tests to match correct overflow/carry semantics. * mul.S: Likewise. gas/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * testsuite/gas/or1k/allinsn.s: Add instruction tests for l.muld, l.muldu, l.macu, l.msb, l.msbu. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions.
2018-06-19Bump to autoconf 2.69 and automake 1.15.1Simon Marchi3-513/+573
When trying to run the update-gnulib.sh script in gdb, I get this: Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1. Aborting. Apparently, it's an issue with a regex in automake that triggers a warning starting with Perl 5.22. It has been fixed in automake 1.15.1. So I think it's a good excuse to bump the versions of autoconf and automake used in the gnulib import. And to avoid requiring multiple builds of autoconf/automake, it was suggested that we bump the required version of those tools for all binutils-gdb. For autoconf, the 2.69 version is universally available, so it's an easy choice. For automake, different distros and distro versions have different automake versions. But 1.15.1 seems to be the most readily available as a package. In any case, it's easy to build it from source. I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ, because I don't think they are useful in our case. They only specify a lower bound for the acceptable version of automake/autoconf. That's useful if you let the user choose the version of the tool they want to use, but want to set a minimum version (because you use a feature that was introduced in that version). In our case, we force people to use a specific version anyway. For the autoconf version, we have the check in config/override.m4 that enforces the version we want. It will be one less thing to update next time we change autotools version. I hit a few categories of problems that required some changes. They are described below along with the chosen solutions. Problem 1: configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation Solution 1: Adjust the code based on the example at that URL. Problem 2 (in zlib/): Makefile.am: error: required file './INSTALL' not found Makefile.am: 'automake --add-missing' can install 'INSTALL' Makefile.am: error: required file './NEWS' not found Makefile.am: error: required file './AUTHORS' not found Makefile.am: error: required file './COPYING' not found Makefile.am: 'automake --add-missing' can install 'COPYING' Solution 2: Add the foreign option to AUTOMAKE_OPTIONS. Problem 3: doc/Makefile.am:20: error: support for Cygnus-style trees has been removed Solution 3: Remove the cygnus options. Problem 4: Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') Solution 4: Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is already defined earlier). Problem 5: doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 5: Rename .texinfo files to .texi. Problem 6: doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 6: Remove the hack at the bottom of doc/Makefile.am and use the info-in-builddir automake option. Problem 7: doc/Makefile.am:35: error: required file '../texinfo.tex' not found doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex' Solution 7: Use the no-texinfo.tex automake option. We also have one in texinfo/texinfo.tex, not sure if we should point to that, or move it (or a newer version of it added with automake --add-missing) to top-level. Problem 8: Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory, Makefile.am:131: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. Solution 8: Use subdir-objects, that means adjusting references to some .o that will now be in config/. Problem 9: configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... ../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from... ../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from... ../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from... ../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from... configure.ac:375: the top level Solution 9: Use AC_LANG_SOURCE, or use proper quoting. Problem 10 (in intl/): configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS /usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from... /usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from... /usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from... /usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from... /usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from... /usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from... /usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from... configure.ac:7: the top level Solution 10: Add AC_USE_SYSTEM_EXTENSIONS in configure.ac. ChangeLog: * libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * README-maintainer-mode: Update version requirements. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. bfd/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. (INCLUDES): Rename to ... (AM_CPPFLAGS): ... this. * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add info-in-builddir no-texinfo.tex. (info_TEXINFOS): Rename bfd.texinfo to bfd.texi. * doc/bfd.texinfo: Rename to ... * doc/bfd.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. binutils/ChangeLog: * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add info-in-builddir no-texinfo.tex. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. config/ChangeLog: * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. etc/ChangeLog: * configure.in: Remove AC_PREREQ. * configure: Re-generate. gas/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects. (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix. * configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles, extra_objects): Add config/ prefix. * doc/as.texinfo: Rename to... * doc/as.texi: ... this. * doc/Makefile.am: Rename as.texinfo to as.texi throughout. Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gdb/ChangeLog: * common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION, PACKAGE_STRING, PACKAGE_TARNAME): Undefine. * configure.ac: Remove AC_PREREQ, add missing quoting. * gnulib/configure.ac: Modernize usage of AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ. * gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69. (AUTOMAKE_VERSION): Bump to 1.15.1. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. * gnulib/aclocal.m4: Re-generate. * gnulib/config.in: Re-generate. * gnulib/configure: Re-generate. * gnulib/import/Makefile.in: Re-generate. gdb/gdbserver/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. gdb/testsuite/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. gold/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting and usage of AC_LANG_SOURCE. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * testsuite/Makefile.in: Re-generate. gprof/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * gconfig.in: Re-generate. intl/ChangeLog: * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. ld/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. (AUTOMAKE_OPTIONS): Add info-in-builddir. * README: Rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. * gen-doc.texi: Likewise. * h8-doc.texi: Likewise. * ld.texinfo: Rename to ... * ld.texi: ... this. * ldint.texinfo: Rename to ... * ldint.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. libdecnumber/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libiberty/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. opcodes/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. * configure.ac: Remove AC_PREREQ. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. readline/ChangeLog.gdb: * configure: Re-generate. * examples/rlfe/configure: Re-generate. sim/ChangeLog: * All configure.ac: Remove AC_PREREQ. * All configure: Re-generate. zlib/ChangeLog.bin-gdb: * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate.
2018-06-18config: Sync with GCCSimon Marchi1-580/+525
... and re-generate all possible configure files, since they may depend on things in config/. config/ChangeLog: Sync with GCC 2018-06-08 Martin Liska <mliska@suse.cz> * bootstrap-mpx.mk: Remove. 2018-05-10 Martin Liska <mliska@suse.cz> PR bootstrap/64914 * bootstrap-ubsan.mk: Define UBSAN_BOOTSTRAP. 2018-05-09 Joshua Watt <jpewhacker@gmail.com> * ax_pthread.m4: Add file. 2018-05-08 Richard Biener <rguenther@suse.de> PR bootstrap/85571 * bootstrap-lto-noplugin.mk: Disable compare. * bootstrap-lto.mk: Supply contrib/compare-lto for do-compare. 2018-04-24 H.J. Lu <hongjiu.lu@intel.com> PR bootstrap/85490 * bootstrap-cet.mk (STAGE4_CFLAGS): New. 2018-04-24 H.J. Lu <hongjiu.lu@intel.com> PR target/85485 * bootstrap-cet.mk (STAGE2_CFLAGS): Remove -mcet. (STAGE3_CFLAGS): Likewise. 2018-04-24 H.J. Lu <hongjiu.lu@intel.com> PR target/85485 * cet.m4 (GCC_CET_FLAGS): Replace -mcet with -mshstk. 2018-04-19 Jakub Jelinek <jakub@redhat.com> * cet.m4 (GCC_CET_FLAGS): Default to --disable-cet, replace --enable-cet=default with --enable-cet=auto. 2018-04-18 David Malcolm <dmalcolm@redhat.com> PR jit/85384 * acx.m4 (GCC_BASE_VER): Remove \$\$ from sed expression.
2018-01-02Update copyright year range in all GDB filesJoel Brobecker17-17/+17
gdb/ChangeLog: Update copyright year range in all GDB files
2017-12-12sim: or1k: add autoconf generated filesStafford Horne3-0/+16410
These are separted out to make the patch easier to read and smaller. sim/ChangeLog: 2017-12-12 Stafford Horne <shorne@gmail.com> Peter Gavin <pgavin@gmail.com> * configure: Regenerated. * or1k/aclocal.m4: Generated. * or1k/config.in: Generated. * or1k/configure: Generated.
2017-12-12sim: or1k: add cgen generated filesStafford Horne10-0/+27522
These are the simulator files generated by cgen. These are split out from the main sim patch to make the patch easier to review and smaller. sim/ChangeLog: 2017-12-12 Stafford Horne <shorne@gmail.com> Peter Gavin <pgavin@gmail.com> * or1k/arch.c: Generated. * or1k/arch.h: Generated. * or1k/cpu.c: Generated. * or1k/cpu.h: Generated. * or1k/cpuall.h: Generated. * or1k/decode.c: Generated. * or1k/decode.h: Generated. * or1k/model.c: Generated. * or1k/sem-switch.c: Generated. * or1k/sem.c: Generated.
2017-12-12sim: or1k: add or1k target to simStafford Horne9-0/+1620
This adds the OpenRISC 32-bit sim target. The OpenRISC sim is a CGEN based sim so the bulk of the code is generated from the .cpu files by CGEN. The engine decode and execute logic in mloop uses scache with pseudo-basic-block extraction and supports both full and fast (switch) modes. The sim does not implement an mmu at the moment. The sim does implement fpu instructions via the common sim-fpu implementation. sim/ChangeLog: 2017-12-12 Stafford Horne <shorne@gmail.com> Peter Gavin <pgavin@gmail.com> * configure.tgt: Add or1k sim. * or1k/README: New file. * or1k/Makefile.in: New file. * or1k/configure.ac: New file. * or1k/mloop.in: New file. * or1k/or1k-sim.h: New file. * or1k/or1k.c: New file. * or1k/sim-if.c: New file. * or1k/sim-main.h: New file. * or1k/traps.c: New file.
generated by cgit v1.1 at 2024-11-25 00:50:35 +0000