| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The m4 macro has 2 args: the "wire" settings (which represents the
hardwired port behavior), and the default settings (which are used
if nothing else is specified). If none are specified, the arch is
expected to support both, and the value will be probed based on the
user runtime options or the input program.
Only two arches today set the default value (bpf & mips). We can
probably let this go as it only shows up in one scenario: the sim
is invoked, but with no inputs, and no user endian selection. This
means bpf will not behave like the other arches: an error is shown
and forces the user to make a choice. If an input program is used
though, we'll still switch the default to that. This allows us to
remove the WITH_DEFAULT_TARGET_BYTE_ORDER setting.
For the ports that set a "wire" endian, move it to the runtime init
of the respective sim_open calls. This allows us to change the
WITH_TARGET_BYTE_ORDER to purely a user-selected configure setting
if they want to force a specific endianness.
With all the endian logic moved to runtime selection, we can move
the configure call up to the common dir so we only process it once
across all ports.
The ppc arch was picking the wire endian based on the target used,
but since we weren't doing that for other biendian arches, we can
let this go too. We'll rely on the input selecting the endian, or
make the user decide.
|
|
Currently, the sim-config module will abort if alignment settings
haven't been specified by the port's configure.ac. This is a bit
weird when we've allowed SIM_AC_OPTION_ALIGNMENT to seem like it's
optional to use. Thus everyone invokes it.
There are 4 alignment settings, but really only 2 matters: strict
and nonstrict. The "mixed" setting is just the default ("unset"),
and "forced" isn't used directly by anyone (it's available as a
runtime option for some ports).
The m4 macro has 2 args: the "wire" settings (which represents the
hardwired port behavior), and the default settings (which are used
if nothing else is specified). If none are specified, then the
build won't work (see above as if SIM_AC_OPTION_ALIGNMENT wasn't
called). If default settings are provided, then that is used, but
we allow the user to override at runtime. Otherwise, the "wire"
settings are used and user runtime options to change are ignored.
Most ports specify a default, or set the "wire" to nonstrict. A
few set "wire" to strict, but it's not clear that's necessary as
it doesn't make the code behavior, by default, any different. It
might make things a little faster, but we should provide the user
the choice of the compromises to make: force a specific mode at
compile time for faster runtime, or allow the choice at runtime.
More likely it seems like an oversight when these ports were
initially created, and/or copied & pasted from existing ports.
With all that backstory, let's get to what this commit does.
First kill off the idea of a compile-time default alignment and
set it to nonstrict in the common code. For any ports that want
strict alignment by default, that code is moved to sim_open while
initializing the sim. That means WITH_DEFAULT_ALIGNMENT can be
completely removed.
Moving the default alignment to the runtime also allows removal
of setting the "wire" settings at configure time. Which allows
removing of all arguments to SIM_AC_OPTION_ALIGNMENT and moving
that call to common code.
The macro logic can be reworked to not pass WITH_ALIGNMENT as -D
CPPFLAG and instead move it to config.h.
All of these taken together mean we can hoist the macro up to the
top level and share it among all sims so behavior is consistent
among all the ports.
|
|
This file is quite large and is getting unmanageable. Split it apart
to follow aclocal best practices by putting one-macro-per-file. There
shouldn't be any real functional changes here as can be seen in the
configure script regens.
|
|
Rather than hand maintain m4 includes in various autotool files,
use AC_CONFIG_MACRO_DIRS to declare the relevant search paths.
This simplifies the code, makes it more robust, and cleans out
unused logic from configure.
|
|
This port only had one minor warning left in it, so fix it and then
enable -Werror behavior by deleting the macro call. We'll use the
common default now (which is -Werror).
|
|
We've had this off for a long time because the sim code was way too
full of warnings for it to be feasible. However, I've cleaned things
up significantly from when this was first merged, and we can start to
turn this around.
Change the macro to enable -Werror by default, and allow ports to opt
out. New ports will get it automatically (and we can push back on
them if they try to turn it off).
Also turn it off for the few ports that still hit warnings for me.
All the rest will get the new default, and we'll wait for feedback
if/when new issues come up.
|
|
When trying to run the update-gnulib.sh script in gdb, I get this:
Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1.
Aborting.
Apparently, it's an issue with a regex in automake that triggers a
warning starting with Perl 5.22. It has been fixed in automake 1.15.1.
So I think it's a good excuse to bump the versions of autoconf and
automake used in the gnulib import. And to avoid requiring multiple
builds of autoconf/automake, it was suggested that we bump the required
version of those tools for all binutils-gdb.
For autoconf, the 2.69 version is universally available, so it's an easy
choice. For automake, different distros and distro versions have
different automake versions. But 1.15.1 seems to be the most readily
available as a package. In any case, it's easy to build it from source.
I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ,
because I don't think they are useful in our case. They only specify a
lower bound for the acceptable version of automake/autoconf. That's
useful if you let the user choose the version of the tool they want to
use, but want to set a minimum version (because you use a feature that
was introduced in that version). In our case, we force people to use a
specific version anyway. For the autoconf version, we have the check in
config/override.m4 that enforces the version we want. It will be one
less thing to update next time we change autotools version.
I hit a few categories of problems that required some changes. They are
described below along with the chosen solutions.
Problem 1:
configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
Solution 1:
Adjust the code based on the example at that URL.
Problem 2 (in zlib/):
Makefile.am: error: required file './INSTALL' not found
Makefile.am: 'automake --add-missing' can install 'INSTALL'
Makefile.am: error: required file './NEWS' not found
Makefile.am: error: required file './AUTHORS' not found
Makefile.am: error: required file './COPYING' not found
Makefile.am: 'automake --add-missing' can install 'COPYING'
Solution 2:
Add the foreign option to AUTOMAKE_OPTIONS.
Problem 3:
doc/Makefile.am:20: error: support for Cygnus-style trees has been removed
Solution 3:
Remove the cygnus options.
Problem 4:
Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Solution 4:
Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is
already defined earlier).
Problem 5:
doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 5:
Rename .texinfo files to .texi.
Problem 6:
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 6:
Remove the hack at the bottom of doc/Makefile.am and use
the info-in-builddir automake option.
Problem 7:
doc/Makefile.am:35: error: required file '../texinfo.tex' not found
doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex'
Solution 7:
Use the no-texinfo.tex automake option. We also have one in
texinfo/texinfo.tex, not sure if we should point to that, or move it
(or a newer version of it added with automake --add-missing) to
top-level.
Problem 8:
Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory,
Makefile.am:131: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
Solution 8:
Use subdir-objects, that means adjusting references to some .o that will now
be in config/.
Problem 9:
configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from...
../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from...
../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from...
../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from...
configure.ac:375: the top level
Solution 9:
Use AC_LANG_SOURCE, or use proper quoting.
Problem 10 (in intl/):
configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS
/usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from...
/usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from...
/usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from...
/usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from...
/usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from...
/usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from...
/usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:7: the top level
Solution 10:
Add AC_USE_SYSTEM_EXTENSIONS in configure.ac.
ChangeLog:
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* README-maintainer-mode: Update version requirements.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
bfd/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
(INCLUDES): Rename to ...
(AM_CPPFLAGS): ... this.
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add
info-in-builddir no-texinfo.tex.
(info_TEXINFOS): Rename bfd.texinfo to bfd.texi.
* doc/bfd.texinfo: Rename to ...
* doc/bfd.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add
info-in-builddir no-texinfo.tex.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
config/ChangeLog:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
etc/ChangeLog:
* configure.in: Remove AC_PREREQ.
* configure: Re-generate.
gas/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects.
(TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix.
* configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles,
extra_objects): Add config/ prefix.
* doc/as.texinfo: Rename to...
* doc/as.texi: ... this.
* doc/Makefile.am: Rename as.texinfo to as.texi throughout.
Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and
info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gdb/ChangeLog:
* common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION,
PACKAGE_STRING, PACKAGE_TARNAME): Undefine.
* configure.ac: Remove AC_PREREQ, add missing quoting.
* gnulib/configure.ac: Modernize usage of
AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ.
* gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69.
(AUTOMAKE_VERSION): Bump to 1.15.1.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
* gnulib/aclocal.m4: Re-generate.
* gnulib/config.in: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
gdb/gdbserver/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
gdb/testsuite/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
gold/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting and usage
of AC_LANG_SOURCE.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* gconfig.in: Re-generate.
intl/ChangeLog:
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
ld/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to
ld.texi, ldint.texinfo to ldint.texi throughout.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
* README: Rename ld.texinfo to ld.texi, ldint.texinfo to
ldint.texi throughout.
* gen-doc.texi: Likewise.
* h8-doc.texi: Likewise.
* ld.texinfo: Rename to ...
* ld.texi: ... this.
* ldint.texinfo: Rename to ...
* ldint.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
libdecnumber/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libiberty/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
opcodes/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
* configure.ac: Remove AC_PREREQ.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
readline/ChangeLog.gdb:
* configure: Re-generate.
* examples/rlfe/configure: Re-generate.
sim/ChangeLog:
* All configure.ac: Remove AC_PREREQ.
* All configure: Re-generate.
zlib/ChangeLog.bin-gdb:
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add
foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
|
|
Currently ports have to call SIM_AC_OPTION_ENVIRONMENT explicitly in
order to make the configure flag available. There's no real reason
to not allow this flag for all ports, so move it to the common sim
macro. This way we get standard behavior across all ports too.
|
|
Currently ports have to call SIM_AC_OPTION_INLINE explicitly in order
to make the configure flag available. There's no real reason to not
allow this flag for all ports, so move it to the common sim macro.
This way we get standard behavior across all ports too.
|
|
The --enable-sim-hostendian flag was purely so people had an escape route
for when cross-compiling. This is because historically, AC_C_BIGENDIAN
did not work in those cases. That was fixed a while ago though, so we can
require that macro everywhere now and simplify a good bit of code.
|
|
Rather than re-invent endian defines, as well as maintain our own list
of OS & arch-specific includes, punt all that logic in favor of the bfd
ones already set up and maintained elsewhere. We already rely on the
bfd library, so leveraging the endian aspect should be fine.
|
|
This port already used a lot of common/ files, so cutting it over to
nrun.o and using a few more common objects is pretty straight forward.
|
|
The SIM_AC_COMMON macro already checks for a bunch of headers, so specific
sim ports need not do it themselves.
|
|
Automake likes to dump macros automatically used into the aclocal.m4
file, but the common/aclocal.m4 naming prevents that. So rename it
to the more normal "acinclude.m4" so the aclocal tool can work.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Now that the sourceware tree generally requires autoconf-2.64, update
the sim tree to require that too.
This allows us to drop the long standing SIM_AC_COMMON/common.m4
workaround as autoconf 2.64+ seems to work for me.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
|
|
|
