aboutsummaryrefslogtreecommitdiff
path: root/sim/lm32
AgeCommit message (Collapse)AuthorFilesLines
2021-05-01sim: nrun: add local strsignal prototypeMike Frysinger3-2/+12
While libiberty provides a definition for this for systems that lack the function (e.g. Windows), it doesn't provide a prototype. So add our own local copy in the one file that uses the func.
2021-04-26sim: nltvals: unify common syscall tablesMike Frysinger2-3/+4
Since libgloss provides a default syscall table for arches, use that to provide the default syscall table for ports. Only the exceptions need to be enumerated now with the common logic as the default.
2021-04-23sim: simplify hardware m4 macroMike Frysinger3-8/+7
Every port using this sets the 1st arg to yes and the 2nd arg to "". These are the defaults we probably want anyways in order to unify the codebase, so move them to the macro and only allow ports to declare extra hardware models.
2021-04-22Do not check for sys/time.h or sys/times.hTom Tromey3-14/+6
This updates the sim so that it unconditionally uses sys/time.h. This is in agreement with existing code, and a recent change to BFD. I also think that sys/times.h is never needed by the sim, so this patch removes the check and the one spot that was conditionally including it. sim/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * m4/sim_ac_common.m4 (SIM_AC_COMMON): Don't check for sys/time.h or sys/times.h. sim/aarch64/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/arm/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/avr/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/bfin/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/bpf/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/common/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * sim-utils.c: Update includes. sim/cr16/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * simops.c: Update includes. * configure, config.in: Rebuild. sim/cris/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * rvdummy.c: Update includes. * dv-rv.c: Update includes. * configure, config.in: Rebuild. sim/d10v/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/erc32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/example-synacor/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/frv/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/ft32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/h8300/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/iq2000/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/lm32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/m32c/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/m32r/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/m68hc11/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/mcore/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/microblaze/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/mips/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/mn10300/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/moxie/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/msp430/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/or1k/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/ppc/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * mon.c: Update includes. * emul_unix.c: Update includes. (do_unix_gettimeofday): Update condition. sim/pru/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/riscv/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/rl78/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/rx/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/sh/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * interp.c: Update includes. * configure, config.in: Rebuild. sim/v850/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild.
2021-04-22Remove and modernize dependencies in simTom Tromey2-15/+8
Some spots in the sim build used manual dependencies, and some spots did a compilation by hand but did not use the automatic dependency tracking code. This patch fixes these spots. I didn't touch ppc, because it doesn't use the common Makefile code. I also didn't touch objects that are for the build machine, because automatic dependencies don't work for those. sim/arm/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (armemu26.o, armemu32.o): Use COMPILE and POSTCOMPILE. sim/bpf/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (arch.o, cpu.o, sim-if.o, traps.o): Remove. (mloop-le.o, mloop-be.o, decode-le.o, decode-be.o, sim-le.o) (sim-be.o): Use COMPILE and POSTCOMPILE. (SIM_EXTRA_DEPS): Add eng-le.h, eng-be.h. sim/cr16/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (SIM_EXTRA_DEPS): New variable. (simops.o): Remove. sim/cris/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (sim-if.o, dv-cris.o, dv-rv.o, arch.o, traps.o) (devices.o, crisv10f.o, mloopv10f.o, cpuv10.o, decodev10.o) (modelv10.o, crisv32f.o, mloopv32f.o, cpuv32.o, decodev32.o) (modelv32.o): Remove. (SIM_EXTRA_DEPS): Add engv10.h. sim/d10v/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (SIM_EXTRA_DEPS): New variable. (simops.o): Remove. sim/frv/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (arch.o, devices.o, frv.o, traps.o, pipeline.o) (interrupts.o, memory.o, cache.o, options.o, reset.o) (registers.o, profile.o, profile-fr400.o, profile-fr450.o) (profile-fr500.o, profile-fr550.o, sim-if.o, mloop.o, cpu.o) (decode.o, sem.o, model.o): Remove. (SIM_EXTRA_DEPS): Add eng.h. sim/iq2000/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (sim-if.o): Remove. (arch.o): Use COMPILE and POSTCOMPILE. (devices.o, iq2000.o, mloop.o, cpu.o, decode.o, sem.o, model.o): Remove. (SIM_EXTRA_DEPS): Add eng.h. sim/lm32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (arch.o, traps.o, sim-if.o, lm32.o, mloop.o) (cpu.o, decode.o, sem.o, model.o): Remove. (SIM_EXTRA_DEPS): Add eng.h. sim/m32r/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (sim-if.o, arch.o, traps.o, traps-linux.o) (devices.o, m32r.o, mloop.o, cpu.o, decode.o, sem.o, model.o) (m32rx.o, mloopx.o, cpux.o, decodex.o, semx.o, modelx.o) (m32r2.o, mloop2.o, cpu2.o, decode2.o, sem2.o, model2.o): Remove. (SIM_EXTRA_DEPS): Add eng.h, engx.h, eng2.h. sim/m68hc11/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (interp.o): Remove. sim/mips/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (interp.o, m16run.o, micromipsrun.o, multi-run.o): Remove. (SIM_EXTRA_DEPS): New variable. sim/mn10300/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (interp.o): Remove. (idecode.o op_utils.o semantics.o): Remove. sim/or1k/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (mloop.o, arch.o, cpu.o, decode.o, sem.o) (sem-switch.o, model.o): Remove. sim/rl78/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (err.o, fpu.o, gdb-if.o, load.o, main.o, mem.o) (reg.o, rl78.o): Remove. sim/rx/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (err.o, fpu.o, gdb-if.o, load.o, main.o, mem.o) (misc.o, reg.o, rx.o, syscalls.o, trace.o): Remove. sim/sh/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (SIM_EXTRA_DEPS): New variable. (interp.o): Remove. sim/v850/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (interp.o, simops.o, semantics.o): Remove.
2021-04-22Require GNU makeTom Tromey2-67/+6
GDB has required GNU make for quite some time, and this patch applies this approach to the sim as well. Requiring GNU make means that automatic dependency tracking can be simple and reliable, and it also makes other refactorings simpler. sim/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * m4/sim_ac_common.m4 (SIM_AC_COMMON): Don't check for make. sim/aarch64/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/arm/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/avr/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/bfin/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/common/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Make-common.in: Require GNU make. sim/cr16/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/cris/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/d10v/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/erc32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/example-synacor/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/frv/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/ft32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/h8300/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/iq2000/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/lm32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/m32c/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/m32r/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/m68hc11/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/mcore/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/microblaze/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/mips/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/mn10300/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/moxie/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/msp430/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/or1k/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/pru/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/riscv/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/rl78/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/rx/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/sh/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/v850/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild.
2021-04-21sim: regen against sim/m4/Mike Frysinger2-12/+16
My scripts weren't updated to use new -I../m4 as the first arg.
2021-04-21sim: use -Werror when probing for supported warning flagsSimon Marchi2-1/+5
When building with clang, we get: error: unknown warning option '-Wmissing-parameter-type' [-Werror,-Wunknown-warning-option] This is because clang only warns by default when encountering an unknown warning option, and the probe for supported warning flags is done without -Werror. All flags are therefore accepted by configure, but then it breaks when actually compiling a source file with -Werror. This is equivalent to this commit in gdb: 3e019bdc20eb81b91ab5bc774386201b874c0bac gdb: Use -Werror when checking for (un)supported warning flags We then see some other compilation errors when building with clang and -Werror, they can be dealt with later.
2021-04-18sim: switch to AC_CHECK_HEADERS_ONCEMike Frysinger1-52/+47
This avoids duplicate tests for headers between common m4, arches, and any other sources that would trigger header tests.
2021-04-18sim: switch to AC_CHECK_FUNCS_ONCE & merge a littleMike Frysinger2-25/+52
This avoids duplicate tests for functions between common m4, arches, and any other sources that would trigger func tests. Also manually delete known duplicate function tests between the m4, bfin, and v850 ports.
2021-04-15sim lm32: Use a known-good shell with genmloop.sh.John Baldwin2-1/+5
Explicitly use a known-good shell found by autoconf for executing additional scripts in genmloop.sh rather than the building user's shell. sim/lm32/ChangeLog: * Makefile.in: Pass -shell to genmloop.sh.
2021-04-12sim: cgen: move cgen_cpu_max_extra_bytes logic into the common codeMike Frysinger2-1/+5
Every arch handles this the same way, so move it to the common code. This will also make unifying the sim_cpu structure easier.
2021-04-08Do not use old-style definitions in simTom Tromey2-10/+9
This changes all the non-generated (hand-written) code in sim to use "new" (post-K&R) style function definitions. 2021-04-08 Tom Tromey <tom@tromey.com> * bpf.c (bpf_def_model_init): Use new-style declaration. sim/common/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * cgen-utils.c (RORQI, ROLQI, RORHI, ROLHI, RORSI, ROLSI): Use new-style declaration. sim/erc32/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * sis.c (run_sim, main): Use new-style declaration. * interf.c (run_sim, sim_open, sim_close, sim_load) (sim_create_inferior, sim_store_register, sim_fetch_register) (sim_info, sim_stop_reason, flush_windows, sim_do_command): Use new-style declaration. * help.c (usage, gen_help): Use new-style declaration. * func.c (batch, set_regi, set_rega, disp_reg, limcalc) (reset_stat, show_stat, init_bpt, int_handler, init_signals) (disp_fpu, disp_regs, disp_ctrl, disp_mem, dis_mem, event) (init_event, set_int, advance_time, now, wait_for_irq, check_bpt) (reset_all, sys_reset, sys_halt): Use new-style declaration. * float.c (get_accex, clear_accex, set_fsr): Use new-style declaration. * exec.c (sub_cc, add_cc, log_cc, dispatch_instruction, fpexec) (chk_asi, execute_trap, check_interrupts, init_regs): Use new-style declaration. * erc32.c (init_sim, reset, decode_ersr, mecparerror) (error_mode, decode_memcfg, decode_wcr, decode_mcr, sim_halt) (close_port, exit_sim, mec_reset, mec_intack, chk_irq, mec_irq) (set_sfsr, mec_read, mec_write, init_stdio, restore_stdio) (port_init, read_uart, write_uart, flush_uart, uarta_tx) (uartb_tx, uart_rx, uart_intr, uart_irq_start, wdog_intr) (wdog_start, rtc_intr, rtc_start, rtc_counter_read) (rtc_scaler_set, rtc_reload_set, gpt_intr, gpt_start) (gpt_counter_read, gpt_scaler_set, gpt_reload_set, timer_ctrl) (memory_read, memory_write, get_mem_ptr, sis_memory_write) (sis_memory_read): Use new-style declaration. sim/frv/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * sim-if.c (sim_open, frv_sim_close, sim_create_inferior): Use new-style declaration. sim/h8300/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * compile.c (cmdline_location): Use new-style declaration. sim/iq2000/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * sim-if.c (sim_open, sim_create_inferior): Use new-style declaration. * iq2000.c (fetch_str): Use new-style declaration. sim/lm32/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * sim-if.c (sim_open, sim_create_inferior): Use new-style declaration. sim/m32r/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * sim-if.c (sim_open, sim_create_inferior): Use new-style declaration.
2021-04-02sim: unify toolchain settingsMike Frysinger3-153/+162
The toplevel, common, and igen dirs all have their own code for setting up toolchain settings. Unify all of that in a new macro.
2021-02-28sim: set up build-time compiler settingsMike Frysinger1-9/+10
Some sim dirs were already setting up CFLAGS_FOR_BUILD in inconsistent ways. Move it to a common place for reuse.
2021-02-28sim: use AC_CHECK_TOOL to find arMike Frysinger1-3/+93
Rather than require $AR be set and then default to `ar`, use the standard AC_CHECK_TOOL helper to find a good prefixed tool. In practice this shouldn't change much as we seem to have macros in the tree that were already setting it up, but we shouldn't rely on that implicitly.
2021-02-28sim: require AC_PROG_CPP explicitlyMike Frysinger2-140/+145
All the scripts were using this implicitly already, so there's no real change for them, but we want to call it explicitly as the CPP tool is used to generate nltvals.def.
2021-02-21sim: common: split up acinclude.m4 into individual m4 filesMike Frysinger4-8/+35
This file is quite large and is getting unmanageable. Split it apart to follow aclocal best practices by putting one-macro-per-file. There shouldn't be any real functional changes here as can be seen in the configure script regens.
2021-02-13sim: switch to AC_CONFIG_MACRO_DIRSMike Frysinger4-1834/+35
Rather than hand maintain m4 includes in various autotool files, use AC_CONFIG_MACRO_DIRS to declare the relevant search paths. This simplifies the code, makes it more robust, and cleans out unused logic from configure.
2021-02-06sim: common: switch AC_CONFIG_HEADERSMike Frysinger1-3/+2
The AC_CONFIG_HEADER macro is long deprecated, so switch to the newer form. This also gets rid of the position limitation, and drops support for an argument to SIM_AC_COMMON which we haven't used anywhere.
2021-02-06sim: drop use of bfd/configure.hostMike Frysinger2-7/+15
These settings might have made sense in darker compiler times, but I think they're largely obsolete now. Looking through the values that get used in HDEFINES, it's quite limited, and configure itself should handle them. If we still need something, we can leverage standard autoconf macros instead, after we get a clear user report. TDEFINES was never set anywhere and was always empty, so prune that.
2021-01-11sim: call SIM_AC_OPTION_WARNINGS(no) in remaining portsMike Frysinger3-2/+113
We want all ports to opt into extra warnings as the default compiler settings lets a lot slide. Opt all the ports that haven't already in to the warning system. None of them build with -Werror, so disable that by default. Hopefully someone finds these important enough to start fixing at some point.
2021-01-11sim: clean up C11 header includesMike Frysinger4-18/+36
Since we require C11 now, we can assume many headers exist, and clean up all of the conditional includes. It's not like any of this code actually accounted for the headers not existing, just whether we could include them. The strings.h cleanup is a little nuanced: it isn't in C11, but every use of it in the codebase will include strings.h only if string.h doesn't exist. Since we now assume the C11 string.h exists, we'll never include strings.h, so we can delete it.
2021-01-09sim: clean up stale AC_PREREQ refsMike Frysinger2-14/+7
This was purged from the tree when we upgraded to autoconf-2.69, but a few references in the sim tree were missed.
2021-01-08sim: require a C11 compilerMike Frysinger2-13/+57
With GDB requiring a C++11 compiler now, this hopefully shouldn't be a big deal. It's been 10 years since C11 came out, so should be plenty of time to upgrade. This will allow us to start cleaning up random header logic and many of our non-standard custom types.
2021-01-04sim: update bug URI to https://Mike Frysinger2-1/+5
2021-01-01Update copyright year range in all GDB filesJoel Brobecker19-19/+19
This commits the result of running gdb/copyright.py as per our Start of New Year procedure... gdb/ChangeLog Update copyright year range in copyright header of all GDB files.
2020-01-01Update copyright year range in all GDB files.Joel Brobecker19-19/+19
gdb/ChangeLog: Update copyright year range in all GDB files.
2019-09-19bfd_section_* macrosAlan Modra1-9/+6
This large patch removes the unnecessary bfd parameter from various bfd section macros and functions. The bfd is hardly ever used and if needed for the bfd_set_section_* or bfd_rename_section functions can be found via section->owner except for the com, und, abs, and ind std_section special sections. Those sections shouldn't be modified anyway. The patch also removes various bfd_get_section_<field> macros, replacing their use with bfd_section_<field>, and adds bfd_set_section_lma. I've also fixed a minor bug in gas where compressed section renaming was done directly rather than calling bfd_rename_section. This would have broken bfd_get_section_by_name and similar functions, but that hardly mattered at such a late stage in gas processing. bfd/ * bfd-in.h (bfd_get_section_name, bfd_get_section_vma), (bfd_get_section_lma, bfd_get_section_alignment), (bfd_get_section_size, bfd_get_section_flags), (bfd_get_section_userdata): Delete. (bfd_section_name, bfd_section_size, bfd_section_vma), (bfd_section_lma, bfd_section_alignment): Lose bfd parameter. (bfd_section_flags, bfd_section_userdata): New. (bfd_is_com_section): Rename parameter. * section.c (bfd_set_section_userdata, bfd_set_section_vma), (bfd_set_section_alignment, bfd_set_section_flags, bfd_rename_section), (bfd_set_section_size): Delete bfd parameter, rename section parameter. (bfd_set_section_lma): New. * bfd-in2.h: Regenerate. * mach-o.c (bfd_mach_o_init_section_from_mach_o): Delete bfd param, update callers. * aoutx.h, * bfd.c, * coff-alpha.c, * coff-arm.c, * coff-mips.c, * coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c, * compress.c, * ecoff.c, * elf-eh-frame.c, * elf-hppa.h, * elf-ifunc.c, * elf-m10200.c, * elf-m10300.c, * elf-properties.c, * elf-s390-common.c, * elf-vxworks.c, * elf.c, * elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-csky.c, * elf32-d10v.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c, * elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c, * elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc1x.c, * elf32-m68k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-nios2.c, * elf32-or1k.c, * elf32-ppc.c, * elf32-pru.c, * elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c, * elf32-score7.c, * elf32-sh.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-visium.c, * elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-bpf.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-sparc.c, * elf64-x86-64.c, * elflink.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c, * elfxx-aarch64.c, * elfxx-mips.c, * elfxx-sparc.c, * elfxx-tilegx.c, * elfxx-x86.c, * i386msdos.c, * linker.c, * mach-o.c, * mmo.c, * opncls.c, * pdp11.c, * pei-x86_64.c, * peicode.h, * reloc.c, * section.c, * syms.c, * vms-alpha.c, * xcofflink.c: Update throughout for bfd section macro and function changes. binutils/ * addr2line.c, * bucomm.c, * coffgrok.c, * dlltool.c, * nm.c, * objcopy.c, * objdump.c, * od-elf32_avr.c, * od-macho.c, * od-xcoff.c, * prdbg.c, * rdcoff.c, * rddbg.c, * rescoff.c, * resres.c, * size.c, * srconv.c, * strings.c, * windmc.c: Update throughout for bfd section macro and function changes. gas/ * as.c, * as.h, * dw2gencfi.c, * dwarf2dbg.c, * ecoff.c, * read.c, * stabs.c, * subsegs.c, * subsegs.h, * write.c, * config/obj-coff-seh.c, * config/obj-coff.c, * config/obj-ecoff.c, * config/obj-elf.c, * config/obj-macho.c, * config/obj-som.c, * config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c, * config/tc-arm.c, * config/tc-avr.c, * config/tc-bfin.c, * config/tc-bpf.c, * config/tc-d10v.c, * config/tc-d30v.c, * config/tc-epiphany.c, * config/tc-fr30.c, * config/tc-frv.c, * config/tc-h8300.c, * config/tc-hppa.c, * config/tc-i386.c, * config/tc-ia64.c, * config/tc-ip2k.c, * config/tc-iq2000.c, * config/tc-lm32.c, * config/tc-m32c.c, * config/tc-m32r.c, * config/tc-m68hc11.c, * config/tc-mep.c, * config/tc-microblaze.c, * config/tc-mips.c, * config/tc-mmix.c, * config/tc-mn10200.c, * config/tc-mn10300.c, * config/tc-msp430.c, * config/tc-mt.c, * config/tc-nds32.c, * config/tc-or1k.c, * config/tc-ppc.c, * config/tc-pru.c, * config/tc-rl78.c, * config/tc-rx.c, * config/tc-s12z.c, * config/tc-s390.c, * config/tc-score.c, * config/tc-score7.c, * config/tc-sh.c, * config/tc-sparc.c, * config/tc-spu.c, * config/tc-tic4x.c, * config/tc-tic54x.c, * config/tc-tic6x.c, * config/tc-tilegx.c, * config/tc-tilepro.c, * config/tc-v850.c, * config/tc-visium.c, * config/tc-wasm32.c, * config/tc-xc16x.c, * config/tc-xgate.c, * config/tc-xstormy16.c, * config/tc-xtensa.c, * config/tc-z8k.c: Update throughout for bfd section macro and function changes. * write.c (compress_debug): Use bfd_rename_section. gdb/ * aarch64-linux-tdep.c, * arm-tdep.c, * auto-load.c, * coff-pe-read.c, * coffread.c, * corelow.c, * dbxread.c, * dicos-tdep.c, * dwarf2-frame.c, * dwarf2read.c, * elfread.c, * exec.c, * fbsd-tdep.c, * gcore.c, * gdb_bfd.c, * gdb_bfd.h, * hppa-tdep.c, * i386-cygwin-tdep.c, * i386-fbsd-tdep.c, * i386-linux-tdep.c, * jit.c, * linux-tdep.c, * machoread.c, * maint.c, * mdebugread.c, * minidebug.c, * mips-linux-tdep.c, * mips-sde-tdep.c, * mips-tdep.c, * mipsread.c, * nto-tdep.c, * objfiles.c, * objfiles.h, * osabi.c, * ppc-linux-tdep.c, * ppc64-tdep.c, * record-btrace.c, * record-full.c, * remote.c, * rs6000-aix-tdep.c, * rs6000-tdep.c, * s390-linux-tdep.c, * s390-tdep.c, * solib-aix.c, * solib-dsbt.c, * solib-frv.c, * solib-spu.c, * solib-svr4.c, * solib-target.c, * spu-linux-nat.c, * spu-tdep.c, * symfile-mem.c, * symfile.c, * symmisc.c, * symtab.c, * target.c, * windows-nat.c, * xcoffread.c, * cli/cli-dump.c, * compile/compile-object-load.c, * mi/mi-interp.c: Update throughout for bfd section macro and function changes. * gcore (gcore_create_callback): Use bfd_set_section_lma. * spu-tdep.c (spu_overlay_new_objfile): Likewise. gprof/ * corefile.c, * symtab.c: Update throughout for bfd section macro and function changes. ld/ * ldcref.c, * ldctor.c, * ldelf.c, * ldlang.c, * pe-dll.c, * emultempl/aarch64elf.em, * emultempl/aix.em, * emultempl/armcoff.em, * emultempl/armelf.em, * emultempl/cr16elf.em, * emultempl/cskyelf.em, * emultempl/m68hc1xelf.em, * emultempl/m68kelf.em, * emultempl/mipself.em, * emultempl/mmix-elfnmmo.em, * emultempl/mmo.em, * emultempl/msp430.em, * emultempl/nios2elf.em, * emultempl/pe.em, * emultempl/pep.em, * emultempl/ppc64elf.em, * emultempl/xtensaelf.em: Update throughout for bfd section macro and function changes. libctf/ * ctf-open-bfd.c: Update throughout for bfd section macro changes. opcodes/ * arc-ext.c: Update throughout for bfd section macro changes. sim/ * common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c, * erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c, * m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c, * rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c, * rx/trace.c: Update throughout for bfd section macro changes.
2019-01-01Update copyright year range in all GDB files.Joel Brobecker19-19/+19
This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files.
2018-12-06sim/opcodes: Allow use of out of tree cgen source directoryAndrew Burgess1-5/+11
When configuring with '--enbale-cgen-maint' the default for both the opcodes/ and sim/ directories is to assume that the cgen source is within the binutils-gdb source tree as binutils-gdb/cgen/. In the old cvs days, this worked well, as cgen was just another sub-module of the single cvs repository and could easily be checked out within the binutils-gdb directory, and managed by cvs in the normal way. Now that binutils-gdb is in git, while cgen is still in cvs, placing the cgen respository within the binutils-gdb tree is more troublesome, and it would be nice if the two tools could be kept separate. Luckily there is already some initial code in the configure.ac files for both opcodes/ and sim/ to support having cgen be located outside of the binutils-gdb tree, however, this was speculative code written imagining a future where cgen would be built and installed to some location. Right now there is no install support for cgen, and so the configure code in opcodes/ and sim/ doesn't really do anything useful. In this commit I repurpose this code to allow binutils-gdb to be configured so that it can make use of a cgen source directory that is outside of the binutils-gdb tree. With this commit applied it is now possible to configure and build binutils-gdb like this: /path/to/binutils-gdb/src/configure --enable-cgen-maint=/path/to/cgen/src/cgen/ make all-opcodes make -C opcodes run-cgen-all Just in case anyone is still using cgen inside the binutils-gdb tree, I have left the default behaviour of '--enable-cgen-maint' (with no parameter) unchanged, that is it looks for the cgen directory as 'binutils-gdb/cgen/'. opcodes/ChangeLog: * configure.ac (enable-cgen-maint): Support passing path to cgen source tree. * configure: Regenerate. sim/ChangeLog: * common/acinclude.m4 (enable-cgen-maint): Support passing path to cgen source tree. * cris/configure: Regenerate. * frv/configure: Regenerate. * iq2000/configure: Regenerate. * lm32/configure: Regenerate. * m32r/configure: Regenerate. * or1k/configure: Regenerate. * sh64/configure: Regenerate.
2018-06-19Bump to autoconf 2.69 and automake 1.15.1Simon Marchi4-550/+601
When trying to run the update-gnulib.sh script in gdb, I get this: Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1. Aborting. Apparently, it's an issue with a regex in automake that triggers a warning starting with Perl 5.22. It has been fixed in automake 1.15.1. So I think it's a good excuse to bump the versions of autoconf and automake used in the gnulib import. And to avoid requiring multiple builds of autoconf/automake, it was suggested that we bump the required version of those tools for all binutils-gdb. For autoconf, the 2.69 version is universally available, so it's an easy choice. For automake, different distros and distro versions have different automake versions. But 1.15.1 seems to be the most readily available as a package. In any case, it's easy to build it from source. I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ, because I don't think they are useful in our case. They only specify a lower bound for the acceptable version of automake/autoconf. That's useful if you let the user choose the version of the tool they want to use, but want to set a minimum version (because you use a feature that was introduced in that version). In our case, we force people to use a specific version anyway. For the autoconf version, we have the check in config/override.m4 that enforces the version we want. It will be one less thing to update next time we change autotools version. I hit a few categories of problems that required some changes. They are described below along with the chosen solutions. Problem 1: configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation Solution 1: Adjust the code based on the example at that URL. Problem 2 (in zlib/): Makefile.am: error: required file './INSTALL' not found Makefile.am: 'automake --add-missing' can install 'INSTALL' Makefile.am: error: required file './NEWS' not found Makefile.am: error: required file './AUTHORS' not found Makefile.am: error: required file './COPYING' not found Makefile.am: 'automake --add-missing' can install 'COPYING' Solution 2: Add the foreign option to AUTOMAKE_OPTIONS. Problem 3: doc/Makefile.am:20: error: support for Cygnus-style trees has been removed Solution 3: Remove the cygnus options. Problem 4: Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') Solution 4: Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is already defined earlier). Problem 5: doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 5: Rename .texinfo files to .texi. Problem 6: doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 6: Remove the hack at the bottom of doc/Makefile.am and use the info-in-builddir automake option. Problem 7: doc/Makefile.am:35: error: required file '../texinfo.tex' not found doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex' Solution 7: Use the no-texinfo.tex automake option. We also have one in texinfo/texinfo.tex, not sure if we should point to that, or move it (or a newer version of it added with automake --add-missing) to top-level. Problem 8: Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory, Makefile.am:131: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. Solution 8: Use subdir-objects, that means adjusting references to some .o that will now be in config/. Problem 9: configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... ../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from... ../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from... ../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from... ../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from... configure.ac:375: the top level Solution 9: Use AC_LANG_SOURCE, or use proper quoting. Problem 10 (in intl/): configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS /usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from... /usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from... /usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from... /usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from... /usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from... /usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from... /usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from... configure.ac:7: the top level Solution 10: Add AC_USE_SYSTEM_EXTENSIONS in configure.ac. ChangeLog: * libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * README-maintainer-mode: Update version requirements. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. bfd/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. (INCLUDES): Rename to ... (AM_CPPFLAGS): ... this. * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add info-in-builddir no-texinfo.tex. (info_TEXINFOS): Rename bfd.texinfo to bfd.texi. * doc/bfd.texinfo: Rename to ... * doc/bfd.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. binutils/ChangeLog: * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add info-in-builddir no-texinfo.tex. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. config/ChangeLog: * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. etc/ChangeLog: * configure.in: Remove AC_PREREQ. * configure: Re-generate. gas/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects. (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix. * configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles, extra_objects): Add config/ prefix. * doc/as.texinfo: Rename to... * doc/as.texi: ... this. * doc/Makefile.am: Rename as.texinfo to as.texi throughout. Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gdb/ChangeLog: * common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION, PACKAGE_STRING, PACKAGE_TARNAME): Undefine. * configure.ac: Remove AC_PREREQ, add missing quoting. * gnulib/configure.ac: Modernize usage of AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ. * gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69. (AUTOMAKE_VERSION): Bump to 1.15.1. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. * gnulib/aclocal.m4: Re-generate. * gnulib/config.in: Re-generate. * gnulib/configure: Re-generate. * gnulib/import/Makefile.in: Re-generate. gdb/gdbserver/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. gdb/testsuite/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. gold/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting and usage of AC_LANG_SOURCE. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * testsuite/Makefile.in: Re-generate. gprof/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * gconfig.in: Re-generate. intl/ChangeLog: * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. ld/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. (AUTOMAKE_OPTIONS): Add info-in-builddir. * README: Rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. * gen-doc.texi: Likewise. * h8-doc.texi: Likewise. * ld.texinfo: Rename to ... * ld.texi: ... this. * ldint.texinfo: Rename to ... * ldint.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. libdecnumber/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libiberty/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. opcodes/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. * configure.ac: Remove AC_PREREQ. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. readline/ChangeLog.gdb: * configure: Re-generate. * examples/rlfe/configure: Re-generate. sim/ChangeLog: * All configure.ac: Remove AC_PREREQ. * All configure: Re-generate. zlib/ChangeLog.bin-gdb: * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate.
2018-06-18config: Sync with GCCSimon Marchi1-14/+18
... and re-generate all possible configure files, since they may depend on things in config/. config/ChangeLog: Sync with GCC 2018-06-08 Martin Liska <mliska@suse.cz> * bootstrap-mpx.mk: Remove. 2018-05-10 Martin Liska <mliska@suse.cz> PR bootstrap/64914 * bootstrap-ubsan.mk: Define UBSAN_BOOTSTRAP. 2018-05-09 Joshua Watt <jpewhacker@gmail.com> * ax_pthread.m4: Add file. 2018-05-08 Richard Biener <rguenther@suse.de> PR bootstrap/85571 * bootstrap-lto-noplugin.mk: Disable compare. * bootstrap-lto.mk: Supply contrib/compare-lto for do-compare. 2018-04-24 H.J. Lu <hongjiu.lu@intel.com> PR bootstrap/85490 * bootstrap-cet.mk (STAGE4_CFLAGS): New. 2018-04-24 H.J. Lu <hongjiu.lu@intel.com> PR target/85485 * bootstrap-cet.mk (STAGE2_CFLAGS): Remove -mcet. (STAGE3_CFLAGS): Likewise. 2018-04-24 H.J. Lu <hongjiu.lu@intel.com> PR target/85485 * cet.m4 (GCC_CET_FLAGS): Replace -mcet with -mshstk. 2018-04-19 Jakub Jelinek <jakub@redhat.com> * cet.m4 (GCC_CET_FLAGS): Default to --disable-cet, replace --enable-cet=default with --enable-cet=auto. 2018-04-18 David Malcolm <dmalcolm@redhat.com> PR jit/85384 * acx.m4 (GCC_BASE_VER): Remove \$\$ from sed expression.
2018-01-02Update copyright year range in all GDB filesJoel Brobecker19-19/+19
gdb/ChangeLog: Update copyright year range in all GDB files
2017-09-06Honor an existing CC_FOR_BUILD in the environment for sim.John Baldwin2-7/+15
This matches the equivalent bits in bfd/acinclude.m4 sim/ChangeLog: * configure.ac: Honor existing CC_FOR_BUILD in environment. * configure: Regenerate. sim/aarch64/ChangeLog: * configure: Regenerate. sim/arm/ChangeLog: * configure: Regenerate. sim/avr/ChangeLog: * configure: Regenerate. sim/bfin/ChangeLog: * configure: Regenerate. sim/common/ChangeLog: * acinclude.m4 (SIM_AC_COMMON) Honor existing CC_FOR_BUILD in environment. sim/cr16/ChangeLog: * configure: Regenerate. sim/cris/ChangeLog: * configure: Regenerate. sim/d10v/ChangeLog: * configure: Regenerate. sim/erc32/ChangeLog: * configure: Regenerate. sim/frv/ChangeLog: * configure: Regenerate. sim/ft32/ChangeLog: * configure: Regenerate. sim/h8300/ChangeLog: * configure: Regenerate. sim/iq2000/ChangeLog: * configure: Regenerate. sim/lm32/ChangeLog: * configure: Regenerate. sim/m32c/ChangeLog: * configure: Regenerate. sim/m32r/ChangeLog: * configure: Regenerate. sim/m68hc11/ChangeLog: * configure: Regenerate. sim/mcore/ChangeLog: * configure: Regenerate. sim/microblaze/ChangeLog: * configure: Regenerate. sim/mips/ChangeLog: * configure: Regenerate. sim/mn10300/ChangeLog: * configure: Regenerate. sim/moxie/ChangeLog: * configure: Regenerate. sim/msp430/ChangeLog: * configure: Regenerate. sim/rl78/ChangeLog: * configure: Regenerate. sim/rx/ChangeLog: * configure: Regenerate. sim/sh/ChangeLog: * configure: Regenerate. sim/sh64/ChangeLog: * configure: Regenerate. sim/v850/ChangeLog: * configure: Regenerate.
2017-02-13sim: use ARRAY_SIZE instead of ad-hoc sizeof calculationsMike Frysinger2-1/+5
2017-01-01update copyright year range in GDB filesJoel Brobecker19-19/+19
This applies the second part of GDB's End of Year Procedure, which updates the copyright year range in all of GDB's files. gdb/ChangeLog: Update copyright year range in all GDB files.
2016-08-15sim: unify symbol table handlingMike Frysinger2-18/+12
The common sim tracing code already handles loading and tracking of symbols from the target program so that it can show symbol info in trace/disassembly calls. Once we touch up the trace code and add a few API callbacks, ports don't need to do loading and searching of symbol tables themselves anymore.
2016-01-10sim: move many common settings from CPPFLAGS to config.hMike Frysinger3-68/+124
Rather than stuffing the command line with a bunch of -D flags, start moving things to config.h which is managed by autoheader. This makes the makefile a bit simpler and the build output tighter, and it makes the migration to automake easier as there are fewer vars to juggle. We'll want to move the other options out too, but it'll take more work.
2016-01-10sim: drop unused SIM_AC_OPTION_PACKAGESMike Frysinger2-7/+6
This was imported from the ppc sim, but that was only used to control a single file, and that is already governed by the hw models. There's no need to have a sep configure option here, especially since none of the other sims are using it. Even when the code is enabled, there's no runtime overhead.
2016-01-10sim: allow the environment configure option everywhereMike Frysinger3-23/+27
Currently ports have to call SIM_AC_OPTION_ENVIRONMENT explicitly in order to make the configure flag available. There's no real reason to not allow this flag for all ports, so move it to the common sim macro. This way we get standard behavior across all ports too.
2016-01-10sim: allow the assert configure option everywhereMike Frysinger2-2/+23
Currently ports have to call SIM_AC_OPTION_ASSERT explicitly in order to make the configure flag available, which none of them do. There's no real reason to not allow this flag for all ports, so move it to the common sim macro. This way we get standard behavior across all ports.
2016-01-10sim: drop targ-vals.def->nltvals.def indirectionMike Frysinger2-57/+5
We don't have alternative nltvals.def files, so always symlinking the targ-vals.def file to it doesn't gain us anything. It does make the build more complicated though and a pain to convert to something newer (like automake). Drop the symlinking entirely. In the future, we'll want to explode this file anyways into the respective arch dirs so things can be selected dynamically at runtime, so it's not like we'll be bringing this back.
2016-01-10sim: allow the inline configure option everywhereMike Frysinger2-3/+40
Currently ports have to call SIM_AC_OPTION_INLINE explicitly in order to make the configure flag available. There's no real reason to not allow this flag for all ports, so move it to the common sim macro. This way we get standard behavior across all ports too.
2016-01-10sim: drop --enable-sim-{regparm,stdcall} optionsMike Frysinger2-12/+6
These options were never exposed for most sims (just the ppc one), and they are really only useful on 32-bit x86 systems. Considering modern systems tend to be 64-bit x86_64 and how well modern compilers are at optimizing code, these have outlived their usefulness.
2016-01-10sim: drop --enable-sim-cflags optionMike Frysinger2-23/+6
No other sub directory provides such a configuration option, so drop it from the sim dir as well. This cleans up a good bit of code in the process. If people want to use custom flags for just the sim, they can still run configure+make by hand in the sim subdir and use the normal CFLAGS settings.
2016-01-09sim: drop common/cconfig.h in favor of a single config.hMike Frysinger3-3/+406
The common subdir sets up a cconfig.h file to hold checks for the common code. In practice, most files still end up using config.h instead which just leads to confusion. Merge all the configure checks that went into cconfig.h into SIM_AC_COMMON so we can drop the cconfig.h file altogether. Now there is only a single config.h file like normal.
2016-01-06sim: sim_{create_inferior,open,parse_args}: constify argv/env slightlyMike Frysinger2-3/+8
2016-01-03 Mike Frysinger <vapier@gentoo.org> * sim-options.c (sim_parse_args): Mark argv array const. * sim-options.h (sim_parse_args): Likewise.
2016-01-04sim: punt x86-specific bswap logicMike Frysinger2-21/+6
The compiler/C library should produce reasonable code for htonl/ntohl, and at least glibc tries pretty hard to always produce good code for them. This logic only had support for 32-bit x86 systems anymore, and it's unlikely people were even opting into this, so drop it all.
2016-01-03sim: parse_args: display getopt error ourselvesMike Frysinger2-3/+5
Fix a long standing todo where we let getopt write directly to stderr when an invalid option is passed. Use the sim io funcs instead as they go through the filtered callbacks that gdb wants.
generated by cgit v1.1 at 2024-11-20 10:16:57 +0000