aboutsummaryrefslogtreecommitdiff
path: root/sim/frv
AgeCommit message (Collapse)AuthorFilesLines
2017-02-13sim: use ARRAY_SIZE instead of ad-hoc sizeof calculationsMike Frysinger2-1/+5
2017-01-01update copyright year range in GDB filesJoel Brobecker34-34/+34
This applies the second part of GDB's End of Year Procedure, which updates the copyright year range in all of GDB's files. gdb/ChangeLog: Update copyright year range in all GDB files.
2016-01-10sim: move many common settings from CPPFLAGS to config.hMike Frysinger3-68/+124
Rather than stuffing the command line with a bunch of -D flags, start moving things to config.h which is managed by autoheader. This makes the makefile a bit simpler and the build output tighter, and it makes the migration to automake easier as there are fewer vars to juggle. We'll want to move the other options out too, but it'll take more work.
2016-01-10sim: drop unused SIM_AC_OPTION_PACKAGESMike Frysinger2-7/+6
This was imported from the ppc sim, but that was only used to control a single file, and that is already governed by the hw models. There's no need to have a sep configure option here, especially since none of the other sims are using it. Even when the code is enabled, there's no runtime overhead.
2016-01-10sim: allow the environment configure option everywhereMike Frysinger3-23/+27
Currently ports have to call SIM_AC_OPTION_ENVIRONMENT explicitly in order to make the configure flag available. There's no real reason to not allow this flag for all ports, so move it to the common sim macro. This way we get standard behavior across all ports too.
2016-01-10sim: allow the assert configure option everywhereMike Frysinger2-2/+23
Currently ports have to call SIM_AC_OPTION_ASSERT explicitly in order to make the configure flag available, which none of them do. There's no real reason to not allow this flag for all ports, so move it to the common sim macro. This way we get standard behavior across all ports.
2016-01-10sim: drop targ-vals.def->nltvals.def indirectionMike Frysinger2-57/+5
We don't have alternative nltvals.def files, so always symlinking the targ-vals.def file to it doesn't gain us anything. It does make the build more complicated though and a pain to convert to something newer (like automake). Drop the symlinking entirely. In the future, we'll want to explode this file anyways into the respective arch dirs so things can be selected dynamically at runtime, so it's not like we'll be bringing this back.
2016-01-10sim: allow the inline configure option everywhereMike Frysinger2-3/+40
Currently ports have to call SIM_AC_OPTION_INLINE explicitly in order to make the configure flag available. There's no real reason to not allow this flag for all ports, so move it to the common sim macro. This way we get standard behavior across all ports too.
2016-01-10sim: drop --enable-sim-{regparm,stdcall} optionsMike Frysinger2-12/+6
These options were never exposed for most sims (just the ppc one), and they are really only useful on 32-bit x86 systems. Considering modern systems tend to be 64-bit x86_64 and how well modern compilers are at optimizing code, these have outlived their usefulness.
2016-01-10sim: drop --enable-sim-cflags optionMike Frysinger2-23/+6
No other sub directory provides such a configuration option, so drop it from the sim dir as well. This cleans up a good bit of code in the process. If people want to use custom flags for just the sim, they can still run configure+make by hand in the sim subdir and use the normal CFLAGS settings.
2016-01-09sim: drop common/cconfig.h in favor of a single config.hMike Frysinger3-3/+406
The common subdir sets up a cconfig.h file to hold checks for the common code. In practice, most files still end up using config.h instead which just leads to confusion. Merge all the configure checks that went into cconfig.h into SIM_AC_COMMON so we can drop the cconfig.h file altogether. Now there is only a single config.h file like normal.
2016-01-06sim: sim_{create_inferior,open,parse_args}: constify argv/env slightlyMike Frysinger2-3/+8
2016-01-03 Mike Frysinger <vapier@gentoo.org> * sim-options.c (sim_parse_args): Mark argv array const. * sim-options.h (sim_parse_args): Likewise.
2016-01-04sim: punt x86-specific bswap logicMike Frysinger2-21/+6
The compiler/C library should produce reasonable code for htonl/ntohl, and at least glibc tries pretty hard to always produce good code for them. This logic only had support for 32-bit x86 systems anymore, and it's unlikely people were even opting into this, so drop it all.
2016-01-03sim: parse_args: display getopt error ourselvesMike Frysinger2-3/+5
Fix a long standing todo where we let getopt write directly to stderr when an invalid option is passed. Use the sim io funcs instead as they go through the filtered callbacks that gdb wants.
2016-01-03sim: TODO: move to wikiMike Frysinger2-8/+4
We're maintaining development docs in the wiki now: https://sourceware.org/gdb/wiki/Sim/TODO
2016-01-03sim: drop host endian configure optionMike Frysinger4-263/+237
The --enable-sim-hostendian flag was purely so people had an escape route for when cross-compiling. This is because historically, AC_C_BIGENDIAN did not work in those cases. That was fixed a while ago though, so we can require that macro everywhere now and simplify a good bit of code.
2016-01-03sim: convert to bfd_endianMike Frysinger5-23/+30
Rather than re-invent endian defines, as well as maintain our own list of OS & arch-specific includes, punt all that logic in favor of the bfd ones already set up and maintained elsewhere. We already rely on the bfd library, so leveraging the endian aspect should be fine.
2016-01-02sim: delete dead current_state globalsMike Frysinger3-9/+7
The global current_state handle to the current simulator state is a design idea that was half implemented, but never really cleaned up. The point was to have a global variable pointing to the state so that funcs could more quickly & easily access the state anywhere. We've instead moved in the direction of passing state around everywhere and don't have any intention of moving back. I also can't find any references to gdb using this variable, or to cgen related "dump_regs" functions, both of which were used in the comments related to this code.
2016-01-01GDB copyright headers update after running GDB's copyright.py script.Joel Brobecker34-34/+34
gdb/ChangeLog: Update year range in copyright notice of all files.
2015-12-27sim: unify sim-hloadMike Frysinger2-1/+4
Pretty much all targets are using this module already, so add it to the common list of objects. The only oddball out here is cris and that's because it supports loading via an offset for all the phdrs. We drop support for that.
2015-12-26sim: punt WITH_DEVICES & tconfig.h supportMike Frysinger3-6/+6
No arch is using this anymore, and we want all new ports using the hardware framework instead. Punt WITH_DEVICES and the two callbacks device_io_{read,write}_buffer. We can also punt the tconfig.h file as no port is using it anymore. This fixes in-tree builds that get confused by picking up the wrong one (common/ vs <port>/) caused by commit ae7d0cac8ce971f7108d270c. Any port that needs to set up a global define can use their own sim-main.h file that they must provide regardless.
2015-12-26sim: standardize sim_create_inferior handling of argv a bit moreMike Frysinger2-4/+13
For targets that process argv in sim_create_inferior, improve the code: - provide more details in the comment - make the check for when to re-init more robust - clean out legacy sim_copy_argv code This will be cleaned up more in the future when we have a common inferior creation function, but at least help new ports get it right until then.
2015-12-25sim: frv: punt WITH_DEVICE supportMike Frysinger6-95/+10
The frv port used the device logic to support a single cache address, and the comments around that are "these were merely copied from a diff port and are unused", plus the code to attach the memory is "#if 0". Just punt it all.
2015-12-25sim: sim-model: build for everyoneMike Frysinger3-4/+5
Rather than include this for some targets, set it up so we can build it all the time via the common code. This makes it easier for targets to opt into it when they're ready, increases build coverage, and allows us to centralize much of the logic. We also get to delete tconfig.h from two more targets -- they were setting WITH_DEVICES to 0 which has the same behavior as not defining it at all. While the SIM_HAVE_MODEL knob is gone, we now have WITH_MODEL_P, but it is only used by the common sim-model code. We use it to declare dummy model lists when the arch hasn't created its own.
2015-12-25sim: move MACH/MODEL types into SIM_xxx namespaceMike Frysinger4-23/+30
The "MACH" and "MODEL" names are a bit generic and collide with symbols used by other sections of code (like h8300's opcodes). Since these are sim-specific types, they really should have a "SIM_" prefix.
2015-12-25sim: move WITH_SCACHE_PBB to sim-main.hMike Frysinger3-5/+10
This helps us break up tconfig.h more. Any file using this define should be pulling in sim-main.h already, so things should continue working.
2015-12-25sim: device_error: puntMike Frysinger2-2/+4
Only four targets implement this function, and three of them do nothing. The 4th merely calls abort. Since calls to this function are followed by calls to sim_hw_abort or sim_io_error, this is largely useless. In the two places where we don't, replace the call with sim_engine_abort. We want to kill off the WITH_DEVICES logic in favor of WITH_HW, so this is a good first step.
2015-12-24sim: make LMA loading the default for all targetsMike Frysinger2-3/+4
Most targets already default to loading code via their LMA, but for a few, this means the default changes from loading VMA to LMA. It's better to have the different targets be consistent, and allows some code clean up.
2015-12-24sim: delete old breakpoint codeMike Frysinger3-32/+8
This code relies on the old sim-break module, but that was deleted in 2003. The module only existed for gdb to tell the sim to set breakpoints on its behalf, but then that logic was abandoned in favor of gdb knowing all about proper breakpoints (since it does already for non-sim targets). Some dead code lived on in the older ports though -- clean it up now.
2015-12-24sim: enable watchpoint module everywhereMike Frysinger2-5/+4
We build & bundle the watchpoint module everywhere, but we don't make the command line flags available by default. A few targets opted in, but most did not. Just enable the flag for everyone. Not all targets will respect the flags (making them nops), but shouldn't be a big deal. This is how we handle other common modules already.
2015-12-24sim: delete SIM_HAVE_MEM_SIZEMike Frysinger2-7/+4
This define isn't used anywhere (doesn't seem to ever have been used by versions committed), so delete the commented out code as it's dead.
2015-11-16sim: sim-stop/sim-reason/sim-reg: move to common obj listMike Frysinger2-2/+6
Now that all arches (for the most part) have moved over, move sim-stop.o, sim-reason.o, and sim-reg.o to the common object list and out of all the arch ports.
2015-11-15sim: sim-close: unify sim_close logicMike Frysinger3-4/+12
Other than the nice advantage of all sims having to declare one fewer common function, this also fixes leakage in pretty much every sim. Many were not freeing any resources, and a few were inconsistent as to the ones they did. Now we have a single module that takes care of all the logic for us. Most of the non-cgen based ones could be deleted outright. The cgen ones required adding a callback to the arch-specific cleanup func. The few that still have close callbacks are to manage their internal state. We do not convert erc32, m32c, ppc, rl78, or rx as they do not use the common sim core.
2015-07-24Remove leading/trailing white spaces in ChangeLogH.J. Lu1-21/+21
2015-06-23sim: use AS_HELP_STRING everywhereMike Frysinger3-17/+35
This helps standardize the configure --help output.
2015-06-12sim: update configure.in->configure.ac docsMike Frysinger2-1/+5
A few places still refer to the configure.in file; update them.
2015-06-12sim: drop -DTRACE from configureMike Frysinger2-3/+7
No code uses this anymore and the symbol conflicts with the new TRACE helper. Punt it from configure.
2015-06-12sim: cgen: namespace custom trace functionsMike Frysinger4-1661/+1668
The cgen code declares some macros/funcs using the trace_xxx prefix, but the code isn't generic and only works with cgen targets. This is blocking the creation of new common trace functions. Let's blindly add cgen_xxx prefixes to all these symbols. Some already use this convention to avoid conflicts, so it makes sense to align them. In the future we might want to move some to the common trace core, but one thing at a time.
2015-06-11sim: frv: drop custom debug maskMike Frysinger2-5/+4
This is the only sim that sets up its own WITH_TRACE mask and it conflicts with the user setting their own list at configure time. Drop it to match all the other sims.
2015-04-18sim: trim old USING_SIM_BASE_H defineMike Frysinger2-2/+4
This doesn't appear to have been used since 1998, but wasn't cleaned up since. So much for being "quick" ;).
2015-04-18sim: unify SIM_CPU definitionMike Frysinger2-3/+4
Since every target typedefs this the same way, move it to the common code. We have to leave Blackfin behind here for now because of inter-dependencies on types and headers: sim-base.h includes sim-model.h which needs types in machs.h which needs types in bfim-sim.h which needs SIM_CPU.
2015-04-18sim: unify sim_cia definitionMike Frysinger2-4/+7
Almost every target defines sim_cia the same way -- either using the address_word type directly, or a type of equivalent size. The only odd one out is sh64 (who has 32bit address_word and 64bit cia), and even that case doesn't seem to make sense. We'll put off clean up though of sh64 and at least set up a sensible default for everyone.
2015-04-17sim: replace CIA_{GET,SET} with CPU_PC_{GET,SET}Mike Frysinger3-4/+6
The CIA_{GET,SET} macros serve the same function as CPU_PC_{GET,SET} except the latter adds a layer of indirection via the sim state. This lets models set up different functions at runtime and doesn't reach so directly into the arch-specific cpu state. It also doesn't make sense to have two sets of macros that do exactly the same thing, so lets standardize on the one that gets us more.
2015-04-15sim: unify sim-cpu usageMike Frysinger3-6/+5
Now that all the targets are utilizing CPU_PC_{FETCH,STORE}, and the cpu state is multicore, and the STATE_CPU defines match, we can move it all to the common code.
2015-04-15sim: cris/frv/h8300/iq2000/lm32/m32r/sh64: standardize cpu stateMike Frysinger2-2/+11
This sets up the sim_state structure and the cpu member to match what we do in most other sims, and what the common code suggests. This is a step to unifying on the sim-cpu.o object.
2015-04-13sim: fix the PKGVERSION defineMike Frysinger2-2/+6
This should be SIM, not GDB.
2015-04-06sim: move sim-engine.o/sim-hrw.o to the common listMike Frysinger2-2/+5
This makes these two objects available to all sims by default.
2015-04-02Regenerate configure in simH.J. Lu1-2/+2
* arm/configure: Regenerated. * avr/configure: Likewise. * bfin/configure: Likewise. * common/configure: Likewise. * cr16/configure: Likewise. * cris/configure: Likewise. * d10v/configure: Likewise. * erc32/configure: Likewise. * frv/configure: Likewise. * ft32/configure: Likewise. * h8300/configure: Likewise. * igen/configure: Likewise. * iq2000/configure: Likewise. * lm32/configure: Likewise. * m32c/configure: Likewise. * m32r/configure: Likewise. * m68hc11/configure: Likewise. * mcore/configure: Likewise. * microblaze/configure: Likewise. * mips/configure: Likewise. * mn10300/configure: Likewise. * moxie/configure: Likewise. * msp430/configure: Likewise. * ppc/configure: Likewise. * rl78/configure: Likewise. * rx/configure: Likewise. * sh/configure: Likewise. * sh64/configure: Likewise. * v850/configure: Likewise.
2015-04-01Regenerate configure in simH.J. Lu1-4/+6
* arm/configure: Regenerated. * avr/configure: Likewise. * bfin/configure: Likewise. * common/configure: Likewise. * cr16/configure: Likewise. * cris/configure: Likewise. * d10v/configure: Likewise. * erc32/configure: Likewise. * frv/configure: Likewise. * ft32/configure: Likewise. * h8300/configure: Likewise. * igen/configure: Likewise. * iq2000/configure: Likewise. * lm32/configure: Likewise. * m32c/configure: Likewise. * m32r/configure: Likewise. * m68hc11/configure: Likewise. * mcore/configure: Likewise. * microblaze/configure: Likewise. * mips/configure: Likewise. * mn10300/configure: Likewise. * moxie/configure: Likewise. * msp430/configure: Likewise. * ppc/configure: Likewise. * rl78/configure: Likewise. * rx/configure: Likewise. * sh/configure: Likewise. * sh64/configure: Likewise. * v850/configure: Likewise.
2015-04-01sim: update zlib handlingMike Frysinger3-84/+17
With zlib being mandatory, and the updated m4 configs, we need to regen and use the new settings w/bfd to avoid linkage errors.
generated by cgit v1.1 at 2024-11-04 16:27:12 +0000