aboutsummaryrefslogtreecommitdiff
path: root/sim/d10v/configure
AgeCommit message (Collapse)AuthorFilesLines
2021-02-28sim: set up build-time compiler settingsMike Frysinger1-9/+10
Some sim dirs were already setting up CFLAGS_FOR_BUILD in inconsistent ways. Move it to a common place for reuse.
2021-02-28sim: use AC_CHECK_TOOL to find arMike Frysinger1-3/+93
Rather than require $AR be set and then default to `ar`, use the standard AC_CHECK_TOOL helper to find a good prefixed tool. In practice this shouldn't change much as we seem to have macros in the tree that were already setting it up, but we shouldn't rely on that implicitly.
2021-02-28sim: require AC_PROG_CPP explicitlyMike Frysinger1-140/+141
All the scripts were using this implicitly already, so there's no real change for them, but we want to call it explicitly as the CPP tool is used to generate nltvals.def.
2021-02-21sim: common: split up acinclude.m4 into individual m4 filesMike Frysinger1-9/+20
This file is quite large and is getting unmanageable. Split it apart to follow aclocal best practices by putting one-macro-per-file. There shouldn't be any real functional changes here as can be seen in the configure script regens.
2021-02-13sim: switch to AC_CONFIG_MACRO_DIRSMike Frysinger1-1814/+16
Rather than hand maintain m4 includes in various autotool files, use AC_CONFIG_MACRO_DIRS to declare the relevant search paths. This simplifies the code, makes it more robust, and cleans out unused logic from configure.
2021-02-06sim: common: switch AC_CONFIG_HEADERSMike Frysinger1-3/+2
The AC_CONFIG_HEADER macro is long deprecated, so switch to the newer form. This also gets rid of the position limitation, and drops support for an argument to SIM_AC_COMMON which we haven't used anywhere.
2021-02-06sim: drop use of bfd/configure.hostMike Frysinger1-7/+11
These settings might have made sense in darker compiler times, but I think they're largely obsolete now. Looking through the values that get used in HDEFINES, it's quite limited, and configure itself should handle them. If we still need something, we can leverage standard autoconf macros instead, after we get a clear user report. TDEFINES was never set anywhere and was always empty, so prune that.
2021-01-11sim: clean up C11 header includesMike Frysinger1-10/+31
Since we require C11 now, we can assume many headers exist, and clean up all of the conditional includes. It's not like any of this code actually accounted for the headers not existing, just whether we could include them. The strings.h cleanup is a little nuanced: it isn't in C11, but every use of it in the codebase will include strings.h only if string.h doesn't exist. Since we now assume the C11 string.h exists, we'll never include strings.h, so we can delete it.
2021-01-09sim: clean up stale AC_PREREQ refsMike Frysinger1-14/+3
This was purged from the tree when we upgraded to autoconf-2.69, but a few references in the sim tree were missed.
2021-01-09sim: enable -Werror by default for some archesMike Frysinger1-5/+0
We've had this off for a long time because the sim code was way too full of warnings for it to be feasible. However, I've cleaned things up significantly from when this was first merged, and we can start to turn this around. Change the macro to enable -Werror by default, and allow ports to opt out. New ports will get it automatically (and we can push back on them if they try to turn it off). Also turn it off for the few ports that still hit warnings for me. All the rest will get the new default, and we'll wait for feedback if/when new issues come up.
2021-01-08sim: require a C11 compilerMike Frysinger1-13/+53
With GDB requiring a C++11 compiler now, this hopefully shouldn't be a big deal. It's been 10 years since C11 came out, so should be plenty of time to upgrade. This will allow us to start cleaning up random header logic and many of our non-standard custom types.
2021-01-04sim: update bug URI to https://Mike Frysinger1-1/+1
2018-06-19Bump to autoconf 2.69 and automake 1.15.1Simon Marchi1-503/+565
When trying to run the update-gnulib.sh script in gdb, I get this: Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1. Aborting. Apparently, it's an issue with a regex in automake that triggers a warning starting with Perl 5.22. It has been fixed in automake 1.15.1. So I think it's a good excuse to bump the versions of autoconf and automake used in the gnulib import. And to avoid requiring multiple builds of autoconf/automake, it was suggested that we bump the required version of those tools for all binutils-gdb. For autoconf, the 2.69 version is universally available, so it's an easy choice. For automake, different distros and distro versions have different automake versions. But 1.15.1 seems to be the most readily available as a package. In any case, it's easy to build it from source. I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ, because I don't think they are useful in our case. They only specify a lower bound for the acceptable version of automake/autoconf. That's useful if you let the user choose the version of the tool they want to use, but want to set a minimum version (because you use a feature that was introduced in that version). In our case, we force people to use a specific version anyway. For the autoconf version, we have the check in config/override.m4 that enforces the version we want. It will be one less thing to update next time we change autotools version. I hit a few categories of problems that required some changes. They are described below along with the chosen solutions. Problem 1: configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation Solution 1: Adjust the code based on the example at that URL. Problem 2 (in zlib/): Makefile.am: error: required file './INSTALL' not found Makefile.am: 'automake --add-missing' can install 'INSTALL' Makefile.am: error: required file './NEWS' not found Makefile.am: error: required file './AUTHORS' not found Makefile.am: error: required file './COPYING' not found Makefile.am: 'automake --add-missing' can install 'COPYING' Solution 2: Add the foreign option to AUTOMAKE_OPTIONS. Problem 3: doc/Makefile.am:20: error: support for Cygnus-style trees has been removed Solution 3: Remove the cygnus options. Problem 4: Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') Solution 4: Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is already defined earlier). Problem 5: doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 5: Rename .texinfo files to .texi. Problem 6: doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 6: Remove the hack at the bottom of doc/Makefile.am and use the info-in-builddir automake option. Problem 7: doc/Makefile.am:35: error: required file '../texinfo.tex' not found doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex' Solution 7: Use the no-texinfo.tex automake option. We also have one in texinfo/texinfo.tex, not sure if we should point to that, or move it (or a newer version of it added with automake --add-missing) to top-level. Problem 8: Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory, Makefile.am:131: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. Solution 8: Use subdir-objects, that means adjusting references to some .o that will now be in config/. Problem 9: configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... ../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from... ../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from... ../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from... ../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from... configure.ac:375: the top level Solution 9: Use AC_LANG_SOURCE, or use proper quoting. Problem 10 (in intl/): configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS /usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from... /usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from... /usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from... /usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from... /usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from... /usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from... /usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from... configure.ac:7: the top level Solution 10: Add AC_USE_SYSTEM_EXTENSIONS in configure.ac. ChangeLog: * libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * README-maintainer-mode: Update version requirements. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. bfd/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. (INCLUDES): Rename to ... (AM_CPPFLAGS): ... this. * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add info-in-builddir no-texinfo.tex. (info_TEXINFOS): Rename bfd.texinfo to bfd.texi. * doc/bfd.texinfo: Rename to ... * doc/bfd.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. binutils/ChangeLog: * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add info-in-builddir no-texinfo.tex. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. config/ChangeLog: * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. etc/ChangeLog: * configure.in: Remove AC_PREREQ. * configure: Re-generate. gas/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects. (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix. * configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles, extra_objects): Add config/ prefix. * doc/as.texinfo: Rename to... * doc/as.texi: ... this. * doc/Makefile.am: Rename as.texinfo to as.texi throughout. Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gdb/ChangeLog: * common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION, PACKAGE_STRING, PACKAGE_TARNAME): Undefine. * configure.ac: Remove AC_PREREQ, add missing quoting. * gnulib/configure.ac: Modernize usage of AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ. * gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69. (AUTOMAKE_VERSION): Bump to 1.15.1. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. * gnulib/aclocal.m4: Re-generate. * gnulib/config.in: Re-generate. * gnulib/configure: Re-generate. * gnulib/import/Makefile.in: Re-generate. gdb/gdbserver/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. gdb/testsuite/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. gold/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting and usage of AC_LANG_SOURCE. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * testsuite/Makefile.in: Re-generate. gprof/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * gconfig.in: Re-generate. intl/ChangeLog: * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. ld/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. (AUTOMAKE_OPTIONS): Add info-in-builddir. * README: Rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. * gen-doc.texi: Likewise. * h8-doc.texi: Likewise. * ld.texinfo: Rename to ... * ld.texi: ... this. * ldint.texinfo: Rename to ... * ldint.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. libdecnumber/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libiberty/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. opcodes/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. * configure.ac: Remove AC_PREREQ. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. readline/ChangeLog.gdb: * configure: Re-generate. * examples/rlfe/configure: Re-generate. sim/ChangeLog: * All configure.ac: Remove AC_PREREQ. * All configure: Re-generate. zlib/ChangeLog.bin-gdb: * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate.
2018-06-18config: Sync with GCCSimon Marchi1-14/+18
... and re-generate all possible configure files, since they may depend on things in config/. config/ChangeLog: Sync with GCC 2018-06-08 Martin Liska <mliska@suse.cz> * bootstrap-mpx.mk: Remove. 2018-05-10 Martin Liska <mliska@suse.cz> PR bootstrap/64914 * bootstrap-ubsan.mk: Define UBSAN_BOOTSTRAP. 2018-05-09 Joshua Watt <jpewhacker@gmail.com> * ax_pthread.m4: Add file. 2018-05-08 Richard Biener <rguenther@suse.de> PR bootstrap/85571 * bootstrap-lto-noplugin.mk: Disable compare. * bootstrap-lto.mk: Supply contrib/compare-lto for do-compare. 2018-04-24 H.J. Lu <hongjiu.lu@intel.com> PR bootstrap/85490 * bootstrap-cet.mk (STAGE4_CFLAGS): New. 2018-04-24 H.J. Lu <hongjiu.lu@intel.com> PR target/85485 * bootstrap-cet.mk (STAGE2_CFLAGS): Remove -mcet. (STAGE3_CFLAGS): Likewise. 2018-04-24 H.J. Lu <hongjiu.lu@intel.com> PR target/85485 * cet.m4 (GCC_CET_FLAGS): Replace -mcet with -mshstk. 2018-04-19 Jakub Jelinek <jakub@redhat.com> * cet.m4 (GCC_CET_FLAGS): Default to --disable-cet, replace --enable-cet=default with --enable-cet=auto. 2018-04-18 David Malcolm <dmalcolm@redhat.com> PR jit/85384 * acx.m4 (GCC_BASE_VER): Remove \$\$ from sed expression.
2017-09-06Honor an existing CC_FOR_BUILD in the environment for sim.John Baldwin1-7/+11
This matches the equivalent bits in bfd/acinclude.m4 sim/ChangeLog: * configure.ac: Honor existing CC_FOR_BUILD in environment. * configure: Regenerate. sim/aarch64/ChangeLog: * configure: Regenerate. sim/arm/ChangeLog: * configure: Regenerate. sim/avr/ChangeLog: * configure: Regenerate. sim/bfin/ChangeLog: * configure: Regenerate. sim/common/ChangeLog: * acinclude.m4 (SIM_AC_COMMON) Honor existing CC_FOR_BUILD in environment. sim/cr16/ChangeLog: * configure: Regenerate. sim/cris/ChangeLog: * configure: Regenerate. sim/d10v/ChangeLog: * configure: Regenerate. sim/erc32/ChangeLog: * configure: Regenerate. sim/frv/ChangeLog: * configure: Regenerate. sim/ft32/ChangeLog: * configure: Regenerate. sim/h8300/ChangeLog: * configure: Regenerate. sim/iq2000/ChangeLog: * configure: Regenerate. sim/lm32/ChangeLog: * configure: Regenerate. sim/m32c/ChangeLog: * configure: Regenerate. sim/m32r/ChangeLog: * configure: Regenerate. sim/m68hc11/ChangeLog: * configure: Regenerate. sim/mcore/ChangeLog: * configure: Regenerate. sim/microblaze/ChangeLog: * configure: Regenerate. sim/mips/ChangeLog: * configure: Regenerate. sim/mn10300/ChangeLog: * configure: Regenerate. sim/moxie/ChangeLog: * configure: Regenerate. sim/msp430/ChangeLog: * configure: Regenerate. sim/rl78/ChangeLog: * configure: Regenerate. sim/rx/ChangeLog: * configure: Regenerate. sim/sh/ChangeLog: * configure: Regenerate. sim/sh64/ChangeLog: * configure: Regenerate. sim/v850/ChangeLog: * configure: Regenerate.
2016-01-10sim: move many common settings from CPPFLAGS to config.hMike Frysinger1-68/+96
Rather than stuffing the command line with a bunch of -D flags, start moving things to config.h which is managed by autoheader. This makes the makefile a bit simpler and the build output tighter, and it makes the migration to automake easier as there are fewer vars to juggle. We'll want to move the other options out too, but it'll take more work.
2016-01-10sim: drop unused SIM_AC_OPTION_PACKAGESMike Frysinger1-7/+2
This was imported from the ppc sim, but that was only used to control a single file, and that is already governed by the hw models. There's no need to have a sep configure option here, especially since none of the other sims are using it. Even when the code is enabled, there's no runtime overhead.
2016-01-10sim: allow the environment configure option everywhereMike Frysinger1-22/+22
Currently ports have to call SIM_AC_OPTION_ENVIRONMENT explicitly in order to make the configure flag available. There's no real reason to not allow this flag for all ports, so move it to the common sim macro. This way we get standard behavior across all ports too.
2016-01-10sim: allow the assert configure option everywhereMike Frysinger1-2/+19
Currently ports have to call SIM_AC_OPTION_ASSERT explicitly in order to make the configure flag available, which none of them do. There's no real reason to not allow this flag for all ports, so move it to the common sim macro. This way we get standard behavior across all ports.
2016-01-10sim: drop targ-vals.def->nltvals.def indirectionMike Frysinger1-57/+1
We don't have alternative nltvals.def files, so always symlinking the targ-vals.def file to it doesn't gain us anything. It does make the build more complicated though and a pain to convert to something newer (like automake). Drop the symlinking entirely. In the future, we'll want to explode this file anyways into the respective arch dirs so things can be selected dynamically at runtime, so it's not like we'll be bringing this back.
2016-01-10sim: allow the inline configure option everywhereMike Frysinger1-50/+36
Currently ports have to call SIM_AC_OPTION_INLINE explicitly in order to make the configure flag available. There's no real reason to not allow this flag for all ports, so move it to the common sim macro. This way we get standard behavior across all ports too.
2016-01-10sim: drop --enable-sim-{regparm,stdcall} optionsMike Frysinger1-12/+2
These options were never exposed for most sims (just the ppc one), and they are really only useful on 32-bit x86 systems. Considering modern systems tend to be 64-bit x86_64 and how well modern compilers are at optimizing code, these have outlived their usefulness.
2016-01-10sim: drop --enable-sim-cflags optionMike Frysinger1-23/+2
No other sub directory provides such a configuration option, so drop it from the sim dir as well. This cleans up a good bit of code in the process. If people want to use custom flags for just the sim, they can still run configure+make by hand in the sim subdir and use the normal CFLAGS settings.
2016-01-09sim: drop common/cconfig.h in favor of a single config.hMike Frysinger1-3/+336
The common subdir sets up a cconfig.h file to hold checks for the common code. In practice, most files still end up using config.h instead which just leads to confusion. Merge all the configure checks that went into cconfig.h into SIM_AC_COMMON so we can drop the cconfig.h file altogether. Now there is only a single config.h file like normal.
2016-01-04sim: punt x86-specific bswap logicMike Frysinger1-21/+2
The compiler/C library should produce reasonable code for htonl/ntohl, and at least glibc tries pretty hard to always produce good code for them. This logic only had support for 32-bit x86 systems anymore, and it's unlikely people were even opting into this, so drop it all.
2016-01-03sim: drop host endian configure optionMike Frysinger1-260/+227
The --enable-sim-hostendian flag was purely so people had an escape route for when cross-compiling. This is because historically, AC_C_BIGENDIAN did not work in those cases. That was fixed a while ago though, so we can require that macro everywhere now and simplify a good bit of code.
2016-01-03sim: convert to bfd_endianMike Frysinger1-17/+17
Rather than re-invent endian defines, as well as maintain our own list of OS & arch-specific includes, punt all that logic in favor of the bfd ones already set up and maintained elsewhere. We already rely on the bfd library, so leveraging the endian aspect should be fine.
2015-12-26sim: punt WITH_DEVICES & tconfig.h supportMike Frysinger1-4/+2
No arch is using this anymore, and we want all new ports using the hardware framework instead. Punt WITH_DEVICES and the two callbacks device_io_{read,write}_buffer. We can also punt the tconfig.h file as no port is using it anymore. This fixes in-tree builds that get confused by picking up the wrong one (common/ vs <port>/) caused by commit ae7d0cac8ce971f7108d270c. Any port that needs to set up a global define can use their own sim-main.h file that they must provide regardless.
2015-06-23sim: use AS_HELP_STRING everywhereMike Frysinger1-13/+24
This helps standardize the configure --help output.
2015-06-12sim: update configure.in->configure.ac docsMike Frysinger1-1/+1
A few places still refer to the configure.in file; update them.
2015-06-12sim: drop -DTRACE from configureMike Frysinger1-3/+3
No code uses this anymore and the symbol conflicts with the new TRACE helper. Punt it from configure.
2015-04-13sim: fix the PKGVERSION defineMike Frysinger1-2/+2
This should be SIM, not GDB.
2015-04-02Regenerate configure in simH.J. Lu1-2/+2
* arm/configure: Regenerated. * avr/configure: Likewise. * bfin/configure: Likewise. * common/configure: Likewise. * cr16/configure: Likewise. * cris/configure: Likewise. * d10v/configure: Likewise. * erc32/configure: Likewise. * frv/configure: Likewise. * ft32/configure: Likewise. * h8300/configure: Likewise. * igen/configure: Likewise. * iq2000/configure: Likewise. * lm32/configure: Likewise. * m32c/configure: Likewise. * m32r/configure: Likewise. * m68hc11/configure: Likewise. * mcore/configure: Likewise. * microblaze/configure: Likewise. * mips/configure: Likewise. * mn10300/configure: Likewise. * moxie/configure: Likewise. * msp430/configure: Likewise. * ppc/configure: Likewise. * rl78/configure: Likewise. * rx/configure: Likewise. * sh/configure: Likewise. * sh64/configure: Likewise. * v850/configure: Likewise.
2015-04-01Regenerate configure in simH.J. Lu1-4/+6
* arm/configure: Regenerated. * avr/configure: Likewise. * bfin/configure: Likewise. * common/configure: Likewise. * cr16/configure: Likewise. * cris/configure: Likewise. * d10v/configure: Likewise. * erc32/configure: Likewise. * frv/configure: Likewise. * ft32/configure: Likewise. * h8300/configure: Likewise. * igen/configure: Likewise. * iq2000/configure: Likewise. * lm32/configure: Likewise. * m32c/configure: Likewise. * m32r/configure: Likewise. * m68hc11/configure: Likewise. * mcore/configure: Likewise. * microblaze/configure: Likewise. * mips/configure: Likewise. * mn10300/configure: Likewise. * moxie/configure: Likewise. * msp430/configure: Likewise. * ppc/configure: Likewise. * rl78/configure: Likewise. * rx/configure: Likewise. * sh/configure: Likewise. * sh64/configure: Likewise. * v850/configure: Likewise.
2015-04-01sim: update zlib handlingMike Frysinger1-81/+13
With zlib being mandatory, and the updated m4 configs, we need to regen and use the new settings w/bfd to avoid linkage errors.
2015-03-30sim: d10v: use common configure optionsMike Frysinger1-2/+415
In preparation for converting to nrun, call the common functions that are needed. This doesn't produce any new warnings, and the generated code should be the same.
2015-03-16sim: rename tconfig.in to tconfig.hMike Frysinger1-10/+4
Rather than manually include tconfig.h when we think we'll need it (which is error prone as it can define symbols we expect from config.h), have it be included directly by config.h. Since we know we have to include that header everywhere already, this will make sure tconfig.h isn't missed. It should also be fine as tconfig.h is supposed to be simple and only set up a few core defines for the target. This allows us to stop symlinking it in place all the time and just use it straight out of the respective source directory.
2015-03-14sim: drop duplicate header checksMike Frysinger1-16/+2
The SIM_AC_COMMON macro already checks for a bunch of headers, so specific sim ports need not do it themselves.
2014-08-19Fix --diable-shared --enable-plugins build breakageAlan Modra1-2/+60
Directories that don't use libtool need to add -ldl (on most *nix hosts) to provide dlopen for libbfd. config/ * plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to LIBS via AC_SEARCH_LIBS. gdb/ * acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl. * config.in: Regenerate. sim/ppc/ * configure.ac: Invoke AC_PLUGINS. * config.in: Regenerate. and regen lots of configure files.
2014-08-15Regenerate sim configury.Roland McGrath1-9/+40
2014-03-04sim: convert old style prototypesMike Frysinger1-7/+4
Most of these prototypes have been killed off, but we have a few left in the sim tree. Clean them up so we can enable the -W flag for it.
2013-09-23Regenerate sim configure files to pick up support for powerpc64le inAlan Modra1-5/+11
libtool.m4.
2013-06-05sim: use AM_MAINTAINER_MODEMike Frysinger1-13/+28
I noticed the sim code is using an old implementation of the maintainer logic. I cut it over to the new macro (like gdb has been doing). In practice, it makes no difference currently as nothing in the sim tree uses it, but I have a follow up commit for the Blackfin tree that needs it.
2013-05-10gdbTom Tromey1-1/+2
Freddie Chopin <freddie_chopin@op.pl> PR build/15414: * configure: Rebuild. * configure.ac (build_warnings): Do not use -Wformat-nonliteral with -Wno-format. sim/common * acinclude.m4 (SIM_AC_OPTION_WARNINGS): Do not use -Wformat-nonliteral with -Wno-format. sim/bfin * configure: Rebuild. sim/cr16 * configure: Rebuild. sim/cris * configure: Rebuild. sim/d10v * configure: Rebuild. sim/igen * configure: Rebuild. sim/m68hc11 * configure: Rebuild. sim/mips * configure: Rebuild. sim/mn10300 * configure: Rebuild. sim/v850 * configure: Rebuild.
2012-11-20Fix sim build when configured with --enable-pluginsH.J. Lu1-1/+8960
* common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS condition. * common/acinclude.m4: Define lt_cv_dlopen_libs. * arm/configure: Regenerate. * avr/configure: Regenerate. * bfin/configure: Regenerate. * common/configure: Regenerate. * cr16/configure: Regenerate. * cris/configure: Regenerate. * d10v/configure: Regenerate. * erc32/configure: Regenerate. * frv/configure: Regenerate. * h8300/configure: Regenerate. * igen/configure: Regenerate. * iq2000/configure: Regenerate. * lm32/configure: Regenerate. * m32c/configure: Regenerate. * m32r/configure: Regenerate. * m68hc11/configure: Regenerate. * mcore/configure: Regenerate. * microblaze/configure: Regenerate. * mips/configure: Regenerate. * mn10300/configure: Regenerate. * moxie/configure: Regenerate. * ppc/configure: Regenerate. * rl78/configure: Regenerate. * rx/configure: Regenerate. * sh/configure: Regenerate. * sh64/configure: Regenerate. * testsuite/configure: Regenerate. * v850/configure: Regenerate.
2012-06-15Define PACKAGE macro in all sims' config.h.Joel Brobecker1-0/+12
Some of the common includes in include/gdb such as callback.h include bfd.h. But there was a recent change in bfd-in.h to require that config.h be included before bfd.h can be included: /* PR 14072: Ensure that config.h is included first. */ #if !defined PACKAGE && !defined PACKAGE_VERSION #error config.h must be included before this header #endif PACKAGE_VERSION is always defined by default by the AC_INIT autoconf macro, but PACKAGE isn't. This patch updates the SIM_AC_COMMON macro to define it, and then regenerates all configure scripts and config.in files. sim/common/changeLog: * acinclude.m4 (SIM_AC_COMMON): Define PACKAGE. * config.in, configure: Regenerate. sim/ChangeLog: * configure: Regenerate. sim/arm/ChangeLog: * config.in, configure: Regenerate. sim/avr/ChangeLog: * config.in, configure: Regenerate. sim/bfin/ChangeLog: * config.in, configure: Regenerate. sim/cr16/ChangeLog: * config.in, configure: Regenerate. sim/cris/ChangeLog: * config.in, configure: Regenerate. sim/d10v/ChangeLog: * config.in, configure: Regenerate. sim/erc32/ChangeLog: * config.in, configure: Regenerate. sim/frv/ChangeLog: * config.in, configure: Regenerate. sim/h8300/ChangeLog: * config.in, configure: Regenerate. sim/iq2000/ChangeLog: * config.in, configure: Regenerate. sim/lm32/ChangeLog: * config.in, configure: Regenerate. sim/m32c/ChangeLog: * config.in, configure: Regenerate. sim/m32r/ChangeLog: * config.in, configure: Regenerate. sim/m68hc11/ChangeLog: * config.in, configure: Regenerate. sim/mcore/ChangeLog: * config.in, configure: Regenerate. sim/microblaze/ChangeLog: * config.in, configure: Regenerate. sim/mips/ChangeLog: * config.in, configure: Regenerate. sim/mn10300/ChangeLog: * config.in, configure: Regenerate. sim/moxie/ChangeLog: * config.in, configure: Regenerate. sim/ppc/ChangeLog: * configure: Regenerate. sim/rl78/ChangeLog: * config.in, configure: Regenerate. sim/rx/ChangeLog: * config.in, configure: Regenerate. sim/sh/ChangeLog: * config.in, configure: Regenerate. sim/sh64/ChangeLog: * config.in, configure: Regenerate. sim/v850/ChangeLog: * config.in, configure: Regenerate. sim/testsuite/ChangeLog: * configure: Regenerate.
2012-03-24[PATCH] sim: make sure to include strsignal prototypeMike Frysinger1-148/+228
Before POSIX standardized strsignal(), old systems would hide the prototype unless the normal extension defines were enabled. So use the AC_USE_SYSTEM_EXTENSIONS helper for that. Then make sure we include string.h ourselves in nrun.c rather than relying on implicit includes via other sim headers. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-12-03sim: generate build dependencies on the flyMike Frysinger1-0/+225
Lift the code that GDB is using to generate dependencies on the fly and port it over to the sim. Now people shouldn't have to manually maintain these in their Makefile's. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-18sim: move from common.m4 to SIM_AC_COMMONMike Frysinger1-361/+352
Now that the sourceware tree generally requires autoconf-2.64, update the sim tree to require that too. This allows us to drop the long standing SIM_AC_COMMON/common.m4 workaround as autoconf 2.64+ seems to work for me. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-09Sync Libtool from GCC.Ralf Wildenhues1-1/+1
/: * libtool.m4: Sync from git Libtool. * ltmain.sh: Likewise. * ltoptions.m4: Likewise. * ltversion.m4: Likewise. * lt~obsolete.m4: Likewise. sim/iq2000/: * configure: Regenerate. sim/d10v/: * configure: Regenerate. sim/m32r/: * configure: Regenerate. sim/frv/: * configure: Regenerate. sim/: * avr/configure: Regenerate. * cris/configure: Regenerate. * microblaze/configure: Regenerate. sim/h8300/: * configure: Regenerate. sim/mn10300/: * configure: Regenerate. sim/erc32/: * configure: Regenerate. sim/arm/: * configure: Regenerate. sim/m68hc11/: * configure: Regenerate. sim/lm32/: * configure: Regenerate. sim/sh64/: * configure: Regenerate. sim/v850/: * configure: Regenerate. sim/cr16/: * configure: Regenerate. sim/moxie/: * configure: Regenerate. sim/m32c/: * configure: Regenerate. sim/mips/: * configure: Regenerate. sim/mcore/: * configure: Regenerate. sim/sh/: * configure: Regenerate. gprof/: * Makefile.in: Regenerate. * configure: Regenerate. opcodes/: * Makefile.in: Regenerate. * configure: Regenerate. gas/: * Makefile.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. ld/: * configure: Regenerate. gdb/testsuite/: * gdb.cell/configure: Regenerate. binutils/: * Makefile.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. bfd/: * Makefile.in: Regenerate. * configure: Regenerate. bfd/doc/: * Makefile.in: Regenerate.
generated by cgit v1.1 at 2024-11-25 06:47:26 +0000