| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In preparation for this script generating more files, change the output
argument to specify a directory. This drops the stdout behavior, but
since no one really runs this tool directly, it's not a big deal.
|
|
Code should not be using these directly, instead they should be
resolving these dynamically via cb_host_to_target_errno maps.
Fix the Blackfin code and remove the defines out of the header
so no new code can rely on them.
|
|
Now that ChangeLog entries are no longer used for sim patches,
this commit renames all relevant sim ChangeLog to ChangeLog-2021,
similar to what we would do in the context of the "Start of New
Year" procedure.
The purpose of this change is to avoid people merging ChangeLog
entries by mistake when applying existing commits that they are
currently working on.
Also throw in a .gitignore entry to keep people from adding new
ChangeLog files anywhere in the sim tree.
|
|
Move these options up to the common dir so we only test & export
them once across all ports.
The setting only affects igen based ports, and they were turning
this on by default, so keep the default in place.
|
|
This makes it easier to override to point to an older version of guile.
The current cgen code doesn't work with guile-2, so need to point to an
older guile-1.8.
|
|
The cgen scache module is enabled by every cgen port, and with the
same default value of 16k (which matches the common default value).
Let's pull this option out of the individual ports (via CPPFLAGS)
and into the common code (via config.h).
The object itself is compiled only for cgen ports atm, so that part
doesn't change. The scache code is initialized dynamically via the
modules.c logic. That's why the profile code needs an additional
CGEN_ARCH check.
This will allow us to collapse arch configure files more. Merging
the source files will require more future work, but integrating the
cgen & non-cgen worlds itself will take a lot.
|
|
Use the new modules.c framework to find & initialize this module.
|
|
Use the new modules.c framework to find & initialize this module.
|
|
Use the new modules.c framework to find & initialize this module.
|
|
Use the new modules.c framework to find & initialize this module.
|
|
These were never fully migrated from the psim to common code, and since
we've finished moving the logic into the runtime sim state, we won't ever
need these. So punt them.
|
|
This kills off another compile-time option by moving the setting to
the individual arch runtimes. This will allow dynamic selection by
the arch when doing a single build with multiple arches.
The sim_model_init rework is a little funky. In the past it was
disabled entirely if no default model was set. We maintain the
spirit of the logic by gating the fallback logic on whether the
port has defined any models.
|
|
We want to do a single build with all arches in one binary which means
we need to namespace sim_machs on a per-arch basis. Move it from a
global variable to the sim description structure so it can be setup at
runtime.
Changing the SIM_MODEL->num from an enum to an int is unfortunate, but
we specifically don't want to maintain a centralized list anymore, and
this was never used directly in common code, just passed to per-arch
callbacks.
|
|
The $(arch) variable is only setup for cgen ports, so calculate this
value dynamically. We also need to generate multiple inputs in order
to properly recreate the subdir Makefile, so list them all.
|
|
Fix building on systems w/out a kill function (e.g. Windows).
|
|
The array of pointers is never modified, so mark it const so it ends
up in the read-only data section.
|
|
The compiler can still do basic format checks with vprintf style
funcs, so add the printf attribute to these.
|
|
This helps these funcs get printf format checking coverage.
The sim-io.c hack as a result is a bit unfortunate, but the compiler
throws warnings when printing with empty strings. In this one case,
we actually want that due to the side-effect of the callback halting
execution for us.
|
|
These cover functions aren't used anywhere, so drop them. There was
one caller, but it's old DOS code that most likely hasn't been tested
in years, so just delete that too.
|
|
We require C11 now, so we can assume & require long long exists.
Drop this old code that hasn't been used for a long long time.
|
|
The cgen trace macros are a bit ugly in that they specify a series of
format strings & arguments in a single call. This means we pass a
non-literal string to printf and the compiler warns about it. Use
the diagnostic macros to suppress that in this one place.
|
|
If the user passed in values outside the range of [0, MAX_NR_PROCESSORS),
it would cause the code to access out-of-bind engine function pointers.
Add some asserts to catch that and to fix the related compiler warnings.
|
|
This helps the compiler process calls to these functions and emit
warnings about mismatched format arguments.
|
|
Shouldn't be any functional changes here.
|
|
This fixes missing prototype warnings, and guarantees the prototypes
stay in sync with the function definitions. One of the macros had
fallen out by declaring the wrong return type.
|
|
This fixes missing prototype warnings, and guarantees the prototypes
stay in sync with the function definitions.
|
|
These prototype blocks are not normally used, so they've fallen out
of sync with the actual function definitions. Resync them all.
|
|
If code tries to send a signal to itself, the callback layer ignores
it and forces the caller to handle it. This allows the sim to turn
that into an engine halt rather than actually killing the sim.
|
|
This will make it easier to emulate the syscall. If the kill target
is the sim itself, don't do anything. This forces the higher layers
to make a decision as to how to handle this event: like halting the
overall engine process.
|
|
We rewrite srcdir in subdir Makefiles that we generate from the common
parent dir since it points to the parent dir. Since @srcdir@ can be a
variety of formats (relative & absolute), switch to @abs_srcdir@ which
is a lot easier to adjust. Our use of srcdir in here should handle it.
|
|
There's been a prototype for this forever, but the implementation was
missing. Probably because there weren't any callers, but we'll start
using it to implement the kill function.
|
|
We've been generating the syscall/errno/open maps, but not the signal
map, even though we've been including them in the source constants.
|
|
Rather than hit the OS interface directly, use the existing callback
layer so the instantiator can decide behavior.
|
|
These ports only use the pieces that have been unified, so we can
merge them into the common configure script and get rid of their
unique one entirely.
We still compile & link separate run programs, and have dedicated
subdir Makefiles, but the configure script portion is merged.
|
|
Move these options up to the common dir so we only test & export
them once across all ports.
|
|
The sim-hardware configure option allows builders to select a set of
device models to enable. But this seems like unnecessary overkill:
the existence of individual device models doesn't affect performance
at all as they are only enabled at runtime if the config uses them,
and individually these are all <5KB a piece. Stripping off a total
of ~50KB from a ~1MB binary doesn't seem useful, and it's extremely
unlikely anyone will ever bother.
So let's simplify the configure/make logic by turning sim-hardware
into a boolean option like many of the other sim options. Any ports
that have unique device models will declare them in their Makefile
instead of at configure time. This will allow us to (eventually)
unify the setting into the common dir.
|
|
Move these options up to the common dir so we only test & export
them once across all ports. It makes it available to targets that
aren't cgen-based, but those will just ignore the settings, so it
shouldn't be an issue.
|
|
This will allow us to build the common code with the same inline
settings as the arch subdirs, and only do the test once.
|
|
I get this when building with gcc 11:
CC common/common_libcommon_a-sim-load.o
In file included from /home/simark/src/binutils-gdb/sim/common/sim-n-bits.h:27,
from /home/simark/src/binutils-gdb/sim/common/sim-bits.c:259,
from /home/simark/src/binutils-gdb/sim/common/sim-bits.h:599,
from /home/simark/src/binutils-gdb/sim/common/sim-basics.h:122,
from /home/simark/src/binutils-gdb/sim/common/sim-load.c:30:
/home/simark/src/binutils-gdb/sim/common/sim-n-endian.h:39:27: error: 'offset_16' defined but not used [-Werror=unused-function]
39 | #define offset_N XCONCAT2(offset_,N)
| ^~~~~~~
/home/simark/src/binutils-gdb/sim/../include/symcat.h:23:26: note: in definition of macro 'CONCAT2'
23 | #define CONCAT2(a,b) a##b
| ^
/home/simark/src/binutils-gdb/sim/common/sim-n-endian.h:39:18: note: in expansion of macro 'XCONCAT2'
39 | #define offset_N XCONCAT2(offset_,N)
| ^~~~~~~~
/home/simark/src/binutils-gdb/sim/common/sim-n-endian.h:138:1: note: in expansion of macro 'offset_N'
138 | offset_N (unsigned_N *x,
| ^~~~~~~~
offset_N uses INLINE_SIM_ENDIAN, which uses UNUSED to put the "unused"
attribute. However, it appears after the function's return type, which
seems to make it not apply to the function. Moving it to before the
return type fixes the error.
Change all instances found in that file.
sim/common/ChangeLog:
* sim-inline.h: Move UNUSED before TYPE.
Change-Id: Ide20106683ed7a9ebf35d484dabf70b309cb1ba6
|
|
The code that set & used this variable was deleted long ago,
but the clean target was missed. Clean that up now.
|
|
Move these options up to the common dir so we only test & export
them once across all ports.
|
|
The common dir is already probing this info since it's using automake,
so pass it down to the subdirs so they don't have to probe it at all.
|
|
Move these options up to the common dir so we only test & export
them once across all ports.
|
|
Move these options up to the common dir so we only test & export
them once across all ports.
|
|
Move these options up to the common dir so we only test & export
them once across all ports.
|
|
Move these options up to the common dir so we only test & export
them once across all ports. It also enables -Werror usage on the
common files we've been pulling out of arch subdirs.
|
|
As we merge settings from subdirs into the common configure, we
sometimes need to keep the settings working in both dirs. Create
a makefile fragment to pass them down so we don't have to run the
checks twice. For now, the file is empty, but we'll start moving
logic in shortly.
|
|
The sim-basics.h is too big and includes too many things. This leads
to some arch's sim-main.h having circular loop issues with defs, and
makes it hard to separate out common objects from arch-specific defs.
By splitting up sim-basics.h and killing off sim-main.h, it'll make
it easier to separate out the two.
|
|
This doesn't need to be included for every sim file, so drop it.
Every C file that needs it seems to already include it.
|
|
The m4 macro has 2 args: the "wire" settings (which represents the
hardwired port behavior), and the default settings (which are used
if nothing else is specified). If none are specified, the arch is
expected to support both, and the value will be probed based on the
user runtime options or the input program.
Only two arches today set the default value (bpf & mips). We can
probably let this go as it only shows up in one scenario: the sim
is invoked, but with no inputs, and no user endian selection. This
means bpf will not behave like the other arches: an error is shown
and forces the user to make a choice. If an input program is used
though, we'll still switch the default to that. This allows us to
remove the WITH_DEFAULT_TARGET_BYTE_ORDER setting.
For the ports that set a "wire" endian, move it to the runtime init
of the respective sim_open calls. This allows us to change the
WITH_TARGET_BYTE_ORDER to purely a user-selected configure setting
if they want to force a specific endianness.
With all the endian logic moved to runtime selection, we can move
the configure call up to the common dir so we only process it once
across all ports.
The ppc arch was picking the wire endian based on the target used,
but since we weren't doing that for other biendian arches, we can
let this go too. We'll rely on the input selecting the endian, or
make the user decide.
|
