aboutsummaryrefslogtreecommitdiff
path: root/sim/common/configure
AgeCommit message (Collapse)AuthorFilesLines
2018-06-18Generated filesusers/simark/autotools-bumpSimon Marchi1-261/+338
2016-01-10sim: move many common settings from CPPFLAGS to config.hMike Frysinger1-5/+1
Rather than stuffing the command line with a bunch of -D flags, start moving things to config.h which is managed by autoheader. This makes the makefile a bit simpler and the build output tighter, and it makes the migration to automake easier as there are fewer vars to juggle. We'll want to move the other options out too, but it'll take more work.
2016-01-10sim: drop unused SIM_AC_OPTION_PACKAGESMike Frysinger1-1/+0
This was imported from the ppc sim, but that was only used to control a single file, and that is already governed by the hw models. There's no need to have a sep configure option here, especially since none of the other sims are using it. Even when the code is enabled, there's no runtime overhead.
2016-01-10sim: drop --enable-sim-{regparm,stdcall} optionsMike Frysinger1-2/+0
These options were never exposed for most sims (just the ppc one), and they are really only useful on 32-bit x86 systems. Considering modern systems tend to be 64-bit x86_64 and how well modern compilers are at optimizing code, these have outlived their usefulness.
2016-01-09sim: drop common/cconfig.h in favor of a single config.hMike Frysinger1-10217/+41
The common subdir sets up a cconfig.h file to hold checks for the common code. In practice, most files still end up using config.h instead which just leads to confusion. Merge all the configure checks that went into cconfig.h into SIM_AC_COMMON so we can drop the cconfig.h file altogether. Now there is only a single config.h file like normal.
2016-01-04sim: punt x86-specific bswap logicMike Frysinger1-21/+2
The compiler/C library should produce reasonable code for htonl/ntohl, and at least glibc tries pretty hard to always produce good code for them. This logic only had support for 32-bit x86 systems anymore, and it's unlikely people were even opting into this, so drop it all.
2016-01-03sim: drop host endian configure optionMike Frysinger1-3/+227
The --enable-sim-hostendian flag was purely so people had an escape route for when cross-compiling. This is because historically, AC_C_BIGENDIAN did not work in those cases. That was fixed a while ago though, so we can require that macro everywhere now and simplify a good bit of code.
2015-12-26sim: punt WITH_DEVICES & tconfig.h supportMike Frysinger1-4/+2
No arch is using this anymore, and we want all new ports using the hardware framework instead. Punt WITH_DEVICES and the two callbacks device_io_{read,write}_buffer. We can also punt the tconfig.h file as no port is using it anymore. This fixes in-tree builds that get confused by picking up the wrong one (common/ vs <port>/) caused by commit ae7d0cac8ce971f7108d270c. Any port that needs to set up a global define can use their own sim-main.h file that they must provide regardless.
2015-06-23sim: use AS_HELP_STRING everywhereMike Frysinger1-8/+12
This helps standardize the configure --help output.
2015-06-12sim: drop -DTRACE from configureMike Frysinger1-3/+3
No code uses this anymore and the symbol conflicts with the new TRACE helper. Punt it from configure.
2015-04-13sim: fix the PKGVERSION defineMike Frysinger1-2/+2
This should be SIM, not GDB.
2015-04-02Regenerate configure in simH.J. Lu1-2/+2
* arm/configure: Regenerated. * avr/configure: Likewise. * bfin/configure: Likewise. * common/configure: Likewise. * cr16/configure: Likewise. * cris/configure: Likewise. * d10v/configure: Likewise. * erc32/configure: Likewise. * frv/configure: Likewise. * ft32/configure: Likewise. * h8300/configure: Likewise. * igen/configure: Likewise. * iq2000/configure: Likewise. * lm32/configure: Likewise. * m32c/configure: Likewise. * m32r/configure: Likewise. * m68hc11/configure: Likewise. * mcore/configure: Likewise. * microblaze/configure: Likewise. * mips/configure: Likewise. * mn10300/configure: Likewise. * moxie/configure: Likewise. * msp430/configure: Likewise. * ppc/configure: Likewise. * rl78/configure: Likewise. * rx/configure: Likewise. * sh/configure: Likewise. * sh64/configure: Likewise. * v850/configure: Likewise.
2015-04-01Regenerate configure in simH.J. Lu1-4/+6
* arm/configure: Regenerated. * avr/configure: Likewise. * bfin/configure: Likewise. * common/configure: Likewise. * cr16/configure: Likewise. * cris/configure: Likewise. * d10v/configure: Likewise. * erc32/configure: Likewise. * frv/configure: Likewise. * ft32/configure: Likewise. * h8300/configure: Likewise. * igen/configure: Likewise. * iq2000/configure: Likewise. * lm32/configure: Likewise. * m32c/configure: Likewise. * m32r/configure: Likewise. * m68hc11/configure: Likewise. * mcore/configure: Likewise. * microblaze/configure: Likewise. * mips/configure: Likewise. * mn10300/configure: Likewise. * moxie/configure: Likewise. * msp430/configure: Likewise. * ppc/configure: Likewise. * rl78/configure: Likewise. * rx/configure: Likewise. * sh/configure: Likewise. * sh64/configure: Likewise. * v850/configure: Likewise.
2015-04-01sim: update zlib handlingMike Frysinger1-80/+13
With zlib being mandatory, and the updated m4 configs, we need to regen and use the new settings w/bfd to avoid linkage errors.
2015-03-16sim: rename tconfig.in to tconfig.hMike Frysinger1-10/+4
Rather than manually include tconfig.h when we think we'll need it (which is error prone as it can define symbols we expect from config.h), have it be included directly by config.h. Since we know we have to include that header everywhere already, this will make sure tconfig.h isn't missed. It should also be fine as tconfig.h is supposed to be simple and only set up a few core defines for the target. This allows us to stop symlinking it in place all the time and just use it straight out of the respective source directory.
2015-01-07Regenerate sim/common/aclocal.m4 and sim/common/configure...Joel Brobecker1-2/+2
... using automake 1.11.1, which is the version we're currently using throughout, instead of 1.11.3. This should be a no-op in practice, but will help automake/aclocal version-related differences to cloud real changes being made. sim/common/ChangeLog: * aclocal.m4, configure: Regenerate using automake 1.11.1.
2014-08-19Fix --diable-shared --enable-plugins build breakageAlan Modra1-2/+60
Directories that don't use libtool need to add -ldl (on most *nix hosts) to provide dlopen for libbfd. config/ * plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to LIBS via AC_SEARCH_LIBS. gdb/ * acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl. * config.in: Regenerate. sim/ppc/ * configure.ac: Invoke AC_PLUGINS. * config.in: Regenerate. and regen lots of configure files.
2014-08-15Regenerate sim configury.Roland McGrath1-9/+40
2013-09-23Regenerate sim configure files to pick up support for powerpc64le inAlan Modra1-5/+11
libtool.m4.
2013-06-05sim: use AM_MAINTAINER_MODEMike Frysinger1-13/+28
I noticed the sim code is using an old implementation of the maintainer logic. I cut it over to the new macro (like gdb has been doing). In practice, it makes no difference currently as nothing in the sim tree uses it, but I have a follow up commit for the Blackfin tree that needs it.
2012-11-20Fix sim build when configured with --enable-pluginsH.J. Lu1-1/+7427
* common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS condition. * common/acinclude.m4: Define lt_cv_dlopen_libs. * arm/configure: Regenerate. * avr/configure: Regenerate. * bfin/configure: Regenerate. * common/configure: Regenerate. * cr16/configure: Regenerate. * cris/configure: Regenerate. * d10v/configure: Regenerate. * erc32/configure: Regenerate. * frv/configure: Regenerate. * h8300/configure: Regenerate. * igen/configure: Regenerate. * iq2000/configure: Regenerate. * lm32/configure: Regenerate. * m32c/configure: Regenerate. * m32r/configure: Regenerate. * m68hc11/configure: Regenerate. * mcore/configure: Regenerate. * microblaze/configure: Regenerate. * mips/configure: Regenerate. * mn10300/configure: Regenerate. * moxie/configure: Regenerate. * ppc/configure: Regenerate. * rl78/configure: Regenerate. * rx/configure: Regenerate. * sh/configure: Regenerate. * sh64/configure: Regenerate. * testsuite/configure: Regenerate. * v850/configure: Regenerate.
2012-06-15Define PACKAGE macro in all sims' config.h.Joel Brobecker1-0/+12
Some of the common includes in include/gdb such as callback.h include bfd.h. But there was a recent change in bfd-in.h to require that config.h be included before bfd.h can be included: /* PR 14072: Ensure that config.h is included first. */ #if !defined PACKAGE && !defined PACKAGE_VERSION #error config.h must be included before this header #endif PACKAGE_VERSION is always defined by default by the AC_INIT autoconf macro, but PACKAGE isn't. This patch updates the SIM_AC_COMMON macro to define it, and then regenerates all configure scripts and config.in files. sim/common/changeLog: * acinclude.m4 (SIM_AC_COMMON): Define PACKAGE. * config.in, configure: Regenerate. sim/ChangeLog: * configure: Regenerate. sim/arm/ChangeLog: * config.in, configure: Regenerate. sim/avr/ChangeLog: * config.in, configure: Regenerate. sim/bfin/ChangeLog: * config.in, configure: Regenerate. sim/cr16/ChangeLog: * config.in, configure: Regenerate. sim/cris/ChangeLog: * config.in, configure: Regenerate. sim/d10v/ChangeLog: * config.in, configure: Regenerate. sim/erc32/ChangeLog: * config.in, configure: Regenerate. sim/frv/ChangeLog: * config.in, configure: Regenerate. sim/h8300/ChangeLog: * config.in, configure: Regenerate. sim/iq2000/ChangeLog: * config.in, configure: Regenerate. sim/lm32/ChangeLog: * config.in, configure: Regenerate. sim/m32c/ChangeLog: * config.in, configure: Regenerate. sim/m32r/ChangeLog: * config.in, configure: Regenerate. sim/m68hc11/ChangeLog: * config.in, configure: Regenerate. sim/mcore/ChangeLog: * config.in, configure: Regenerate. sim/microblaze/ChangeLog: * config.in, configure: Regenerate. sim/mips/ChangeLog: * config.in, configure: Regenerate. sim/mn10300/ChangeLog: * config.in, configure: Regenerate. sim/moxie/ChangeLog: * config.in, configure: Regenerate. sim/ppc/ChangeLog: * configure: Regenerate. sim/rl78/ChangeLog: * config.in, configure: Regenerate. sim/rx/ChangeLog: * config.in, configure: Regenerate. sim/sh/ChangeLog: * config.in, configure: Regenerate. sim/sh64/ChangeLog: * config.in, configure: Regenerate. sim/v850/ChangeLog: * config.in, configure: Regenerate. sim/testsuite/ChangeLog: * configure: Regenerate.
2012-03-24[PATCH] sim: make sure to include strsignal prototypeMike Frysinger1-118/+180
Before POSIX standardized strsignal(), old systems would hide the prototype unless the normal extension defines were enabled. So use the AC_USE_SYSTEM_EXTENSIONS helper for that. Then make sure we include string.h ourselves in nrun.c rather than relying on implicit includes via other sim headers. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-12-03sim: generate build dependencies on the flyMike Frysinger1-0/+187
Lift the code that GDB is using to generate dependencies on the fly and port it over to the sim. Now people shouldn't have to manually maintain these in their Makefile's. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-11-07sim: dv-cfi: check for posix_fallocateMike Frysinger1-1/+1
Some systems (like OS X) do not have posix_fallocate. Add a configure check for it before we try to use it. This is less work than trying to support old systems. URL: http://sourceware.org/bugzilla/show_bug.cgi?id=13161 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-18sim: move from common.m4 to SIM_AC_COMMONMike Frysinger1-355/+340
Now that the sourceware tree generally requires autoconf-2.64, update the sim tree to require that too. This allows us to drop the long standing SIM_AC_COMMON/common.m4 workaround as autoconf 2.64+ seems to work for me. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-30sim: use socklen_t with accept()Mike Frysinger1-0/+68
The accept() function takes a socklen_t, not an int. Using an int causes: dv-sockser.c: In function 'connected_p': dv-sockser.c:273: warning: pointer targets in passing argument 3 of 'accept' differ in signedness So use the same socklen_t detection code as gdb and convert the accept().
2010-01-09Sync Libtool from GCC.Ralf Wildenhues1-1/+1
/: * libtool.m4: Sync from git Libtool. * ltmain.sh: Likewise. * ltoptions.m4: Likewise. * ltversion.m4: Likewise. * lt~obsolete.m4: Likewise. sim/iq2000/: * configure: Regenerate. sim/d10v/: * configure: Regenerate. sim/m32r/: * configure: Regenerate. sim/frv/: * configure: Regenerate. sim/: * avr/configure: Regenerate. * cris/configure: Regenerate. * microblaze/configure: Regenerate. sim/h8300/: * configure: Regenerate. sim/mn10300/: * configure: Regenerate. sim/erc32/: * configure: Regenerate. sim/arm/: * configure: Regenerate. sim/m68hc11/: * configure: Regenerate. sim/lm32/: * configure: Regenerate. sim/sh64/: * configure: Regenerate. sim/v850/: * configure: Regenerate. sim/cr16/: * configure: Regenerate. sim/moxie/: * configure: Regenerate. sim/m32c/: * configure: Regenerate. sim/mips/: * configure: Regenerate. sim/mcore/: * configure: Regenerate. sim/sh/: * configure: Regenerate. gprof/: * Makefile.in: Regenerate. * configure: Regenerate. opcodes/: * Makefile.in: Regenerate. * configure: Regenerate. gas/: * Makefile.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. ld/: * configure: Regenerate. gdb/testsuite/: * gdb.cell/configure: Regenerate. binutils/: * Makefile.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. bfd/: * Makefile.in: Regenerate. * configure: Regenerate. bfd/doc/: * Makefile.in: Regenerate.
2009-11-24 * common/aclocal.m4: Add include of ../../config/zlib.m4.Joel Brobecker1-1/+20
* common/common.m4: Use AM_ZLIB to check for zlib support. * ppc/configure.ac: Likewise. * arm/configure, avr/configure, common/configure, cr16/configure, cris/configure, d10v/configure, erc32/configure, frv/configure, h8300/configure, iq2000/configure, lm32/configure, m32c/configure, m32r/configure, m68hc11/configure, mcore/configure, microblaze/configure, mips/configure, mn10300/configure, moxie/configure, ppc/configure, sh/configure, sh64/configure, v850/configure: Regenerate.
2009-08-29Remove SIM_CHECK_MEMBER* in sim/common/.Ralf Wildenhues1-12/+13
sim/common/: * aclocal.m4 (SIM_CHECK_MEMBER, SIM_CHECK_MEMBERS) (SIM_CHECK_MEMBERS_1): Remove. * configure.ac: Replace SIM_CHECK_MEMBERS call with equivalent AC_CHECK_MEMBERS one. * configure: Regenerate.
2009-08-29Fix SIM_CHECK_MEMBER definition with Autoconf 2.64.Ralf Wildenhues1-1/+49
sim/common/: * aclocal.m4 (SIM_CHECK_MEMBER): Use AU_ALIAS to define, not defn. * configure: Regenerate.
2009-08-22Regenerate tree using Autoconf 2.64 and Automake 1.11.Ralf Wildenhues1-5265/+3262
config/: * override.m4 (_GCC_AUTOCONF_VERSION): Bump to 2.64. /: * configure: Regenerate. etc/: * configure: Regenerate. sim/common/: * config.in: Regenerate. * configure: Likewise. sim/iq2000/: * config.in: Regenerate. * configure: Likewise. sim/d10v/: * config.in: Regenerate. * configure: Likewise. sim/igen/: * config.in: Regenerate. * configure: Likewise. sim/m32r/: * config.in: Regenerate. * configure: Likewise. sim/frv/: * config.in: Regenerate. * configure: Likewise. sim/: * avr/config.in: Regenerate. * avr/configure: Likewise. * configure: Likewise. * cris/config.in: Likewise. * cris/configure: Likewise. sim/h8300/: * config.in: Regenerate. * configure: Likewise. sim/mn10300/: * config.in: Regenerate. * configure: Likewise. sim/ppc/: * config.in: Regenerate. * configure: Likewise. sim/erc32/: * config.in: Regenerate. * configure: Likewise. sim/arm/: * config.in: Regenerate. * configure: Likewise. sim/m68hc11/: * config.in: Regenerate. * configure: Likewise. sim/lm32/: * config.in: Regenerate. * configure: Likewise. sim/sh64/: * config.in: Regenerate. * configure: Likewise. sim/v850/: * config.in: Regenerate. * configure: Likewise. sim/cr16/: * config.in: Regenerate. * configure: Likewise. sim/moxie/: * config.in: Regenerate. * configure: Likewise. sim/m32c/: * config.in: Regenerate. * configure: Likewise. sim/mips/: * config.in: Regenerate. * configure: Likewise. sim/mcore/: * config.in: Regenerate. * configure: Likewise. sim/testsuite/d10v-elf/: * configure: Regenerate. sim/testsuite/: * configure: Regenerate. sim/testsuite/frv-elf/: * configure: Regenerate. sim/testsuite/m32r-elf/: * configure: Regenerate. sim/testsuite/mips64el-elf/: * configure: Regenerate. sim/sh/: * config.in: Regenerate. * configure: Likewise. gold/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. * testsuite/Makefile.in: Likewise. gprof/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * configure: Likewise. * gconfig.in: Likewise. opcodes/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. gas/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. * doc/Makefile.in: Likewise. ld/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. gdb/: * aclocal.m4: Regenerate. * config.in: Likewise. * configure: Likewise. * gnulib/Makefile.in: Likewise. gdb/doc/: * configure: Regenerate. gdb/gdbserver/: * aclocal.m4: Regenerate. * config.in: Likewise. * configure: Likewise. gdb/testsuite/: * configure: Regenerate. * gdb.hp/configure: Likewise. * gdb.hp/gdb.aCC/configure: Likewise. * gdb.hp/gdb.base-hp/configure: Likewise. * gdb.hp/gdb.compat/configure: Likewise. * gdb.hp/gdb.defects/configure: Likewise. * gdb.hp/gdb.objdbg/configure: Likewise. * gdb.stabs/configure: Likewise. binutils/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. * doc/Makefile.in: Likewise. bfd/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. bfd/doc/: * Makefile.in: Regenerate. readline/: * configure: Regenerate. readline/examples/rlfe/: * configure: Regenerate.
2009-08-22Fixup readline and sim including of override.m4Ralf Wildenhues1-16/+43
readline/examples/rlfe/: * configure.in: m4_include toplevel config/override.m4. * configure: Regenerate. readline/ChangeLog.gdb: * configure.in: m4_include toplevel config/override.m4. * configure: Regenerate. sim/: * configure.ac: m4_include toplevel config/override.m4. * configure: Regenerate. * avr/configure: Regenerate. * cris/configure: Regenerate. sim/common/: * aclocal.m4: m4_include toplevel config/override.m4. * configure: Regenerate. sim/iq2000/: * configure: Regenerate. sim/d10v/: * configure: Regenerate. sim/igen/: * configure: Regenerate. sim/m32r/: * configure: Regenerate. sim/frv/: * configure: Regenerate. sim/h8300/: * configure: Regenerate. sim/mn10300/: * configure: Regenerate. sim/ppc/: * configure: Regenerate. sim/erc32/: * configure: Regenerate. sim/arm/: * configure: Regenerate. sim/m68hc11/: * configure: Regenerate. sim/lm32/: * configure: Regenerate. sim/sh64/: * configure: Regenerate. sim/v850/: * configure: Regenerate. sim/cr16/: * configure: Regenerate. sim/moxie/: * configure: Regenerate. sim/m32c/: * configure: Regenerate. sim/mips/: * configure: Regenerate. sim/mcore/: * configure: Regenerate. sim/sh/: * configure: Regenerate.
2008-07-11 * common.m4: Add test for libz and zlib.h.Hans-Peter Nilsson1-0/+278
* configure: Regenerate to track ../common/common.m4 changes. * config.in: Ditto.
2008-06-07sim:Joseph Myers1-1/+69
2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * cris/configure: Regenerate. sim/common: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * aclocal.m4: Include ../../config/acx.m4. * common.m4: Use ACX_PKGVERSION and ACX_BUGURL. * configure, config.in: Regenerate. * Make-common.in (LIB_OBJS): Add version.o. (version.c, version.o): New rules. * run.c: Include version.h. (usage): Add help parameter. Print output either to stdout or stderr depending on that parameter. (print_version): New. (main): Check for --help and --version. * run-sim.h (sim_target_display_usage): Add help parameter. * version.h: New. sim/arm: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. * wrapper.c (sim_target_display_usage): Add help parameter. sim/cr16: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/d10v: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/erc32: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/frv: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/h8300: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/iq2000: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/m32c: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/m32r: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/m68hc11: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/mcore: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/mips: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/mn10300: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/ppc: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure.ac: Use ACX_PKGVERSION and ACX_BUGURL. * configure, config.in: Regenerated. * Makefile.in (LIB_OBJ): Add version.o. (version.c, version.o): New rules. * psim.c (psim_usage): Add help parameter. Print the bug URL. Exit with code 0 for help. (psim_options): Update calls to psim_usage. Handle --help and --version. * psim.h (psim_usage): Update prototype. * main.c (main): Update psim_usage call. sim/sh: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/sh64: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/v850: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate.
2006-06-13 * common/aclocal.m4: Pass ../../intl to ZW_GNU_GETTEXT_SISTER_DIR.Richard Earnshaw1-2/+3
* common/common.m4: Likewise. * */configure: Regenerate.
2006-06-05common/Daniel Jacobowitz1-2/+84
* aclocal.m4: Use ZW_GNU_GETTEXT_SISTER_DIR. most subdirs/ * configure: Regenerated.
2006-05-31Configury changes: update src repository (binutils, gdb, and rda) to useDaniel Jacobowitz1-2790/+99
config/gettext-sister.m4 instead of the old gettext.m4. Regenerate all affected autotools files. Include intl in gdb releases again.
2005-04-292005-04-29 Paul Brook <paul@codesourcery.com>Paul Brook1-139/+77
* common/callback.c (PIPE_BUF): Provide default refinition. (os_lstat): Use stat if lstat is not available on the host. (os_ftruncate): Return EINVAL if not available on the host. (os_truncate): Ditto. * common/configure.ac: Check for lstat, truncate and ftruncate. * common/configure: Regenerate. * common/config.in: Regenerate.
2005-03-23From common/ChangeLog:Mark Kettenis1-11/+19
* aclocal.m4 Include ../../gettext.m4. (CY_WITH_NLS, CY_GNU_GETTEXT, AM_PATH_PROG_WITH_TEST) (AM_LC_MESSAGES): Remove. * configure: Regenerate. Regenerate all other configures.
2005-01-14Index: arm/ChangeLogAndrew Cagney1-1151/+1168
2005-01-14 Andrew Cagney <cagney@gnu.org> * configure.ac: Sinclude aclocal.m4 before common.m4. Add explicit call to AC_CONFIG_HEADER. * configure: Regenerate. Index: common/ChangeLog 2005-01-14 Andrew Cagney <cagney@gnu.org> * configure.ac: Replace SIM_AC_COMMON with sinclude of common.m4. Add explicit call to AC_CONFIG_HEADER. * common.m4: Delete call to AC_CONFIG_HEADER, update usage. * configure: Re-generate. Index: d10v/ChangeLog 2005-01-14 Andrew Cagney <cagney@gnu.org> * configure.ac: Sinclude aclocal.m4 before common.m4. Add explicit call to AC_CONFIG_HEADER. * configure: Regenerate. Index: erc32/ChangeLog 2005-01-14 Andrew Cagney <cagney@gnu.org> * configure.ac: Sinclude aclocal.m4 before common.m4. Add explicit call to AC_CONFIG_HEADER. * configure: Regenerate. Index: frv/ChangeLog 2005-01-14 Andrew Cagney <cagney@gnu.org> * configure.ac: Sinclude aclocal.m4 before common.m4. Add explicit call to AC_CONFIG_HEADER. * configure: Regenerate. Index: h8300/ChangeLog 2005-01-14 Andrew Cagney <cagney@gnu.org> * configure.ac: Sinclude aclocal.m4 before common.m4. Add explicit call to AC_CONFIG_HEADER. * configure: Regenerate. Index: m32r/ChangeLog 2005-01-14 Andrew Cagney <cagney@gnu.org> * configure.ac: Sinclude aclocal.m4 before common.m4. Add explicit call to AC_CONFIG_HEADER. * configure: Regenerate. Index: m68hc11/ChangeLog 2005-01-14 Andrew Cagney <cagney@gnu.org> * configure.ac: Sinclude aclocal.m4 before common.m4. Add explicit call to AC_CONFIG_HEADER. * configure: Regenerate. Index: mcore/ChangeLog 2005-01-14 Andrew Cagney <cagney@gnu.org> * configure.ac: Sinclude aclocal.m4 before common.m4. Add explicit call to AC_CONFIG_HEADER. * configure: Regenerate. Index: mips/ChangeLog 2005-01-14 Andrew Cagney <cagney@gnu.org> * configure.ac: Sinclude aclocal.m4 before common.m4. Add explicit call to AC_CONFIG_HEADER. * configure: Regenerate. Index: mn10300/ChangeLog 2005-01-14 Andrew Cagney <cagney@gnu.org> * configure.ac: Sinclude aclocal.m4 before common.m4. Add explicit call to AC_CONFIG_HEADER. * configure: Regenerate. Index: sh/ChangeLog 2005-01-14 Andrew Cagney <cagney@gnu.org> * configure.ac: Sinclude aclocal.m4 before common.m4. Add explicit call to AC_CONFIG_HEADER. * configure: Regenerate. Index: v850/ChangeLog 2005-01-14 Andrew Cagney <cagney@gnu.org> * configure.ac: Sinclude aclocal.m4 before common.m4. Add explicit call to AC_CONFIG_HEADER. * configure: Regenerate.
2005-01-10Index: arm/ChangeLogAndrew Cagney1-2914/+8040
2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Replace configure.in. Requires autoconf 2.59 and correctly calls AC_CONFIG_SUBDIRS. * configure: Re-generate. Index: common/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * aclocal.m4 (SIM_AC_COMMON): Delete call to AC_CONFIG_AUX_DIR. * configure: Re-generate. Index: d10v/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: erc32/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: frv/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: h8300/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: igen/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: m32r/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: m68hc11/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: mcore/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: mips/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: mn10300/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: ppc/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: sh/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: testsuite/d10v-elf/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: testsuite/frv-elf/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: testsuite/m32r-elf/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: testsuite/mips64el-elf/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: testsuite/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: v850/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate.
2004-12-03 * configure.in (SIM_CHECK_MEMBERS): Call for struct stat membersHans-Peter Nilsson1-0/+870
st_dev, st_ino, st_mode, st_nlink, st_uid, st_gid, st_rdev, st_size, st_blksize, st_blocks, st_atime, st_mtime and st_ctime. * aclocal.m4 (SIM_CHECK_MEMBER, SIM_CHECK_MEMBERS_1) (SIM_CHECK_MEMBERS): New macros. * callback.c (cb_host_to_target_stat): Use temporary macro ST_x for struct stat member test and write. Add ST_x calls for each struct stat member tested in configure.in. Wrap each ST_x call in #ifdef of configure macro for that member. * configure, config.in: Regenerate.
2001-03-20* mmap support for common simulatorsFrank Ch. Eigler1-1/+56
2001-03-16 Frank Ch. Eigler <fche@redhat.com> Add support for mmap-based memory regions. * sim-memopt.c (mmap_next_fd): New global. (sim_memory_init): Reinitialize it. (OPTION_MEMORY_MAPFILE, memory_option_handler): Support new "--memory-mapfile FILE" option. Check for some errors. (do_memopt_add): Conditionally do mmap instead of malloc for backing store of simulated memory. Check for more errors. (do_simopt_delete, sim_memory_uninstall): Corresponding cleanup. * sim-memopt.h (munmap_length): New member of _sim_memopt. * configure.in: Look for mmap/fstat related functions and headers. * config.in, configure: Regenerated.
2000-05-24Change profiling so that it is enabled by default. Re-generate everything.Andrew Cagney1-147/+158
1999-09-09import gdb-1999-09-08 snapshotStan Shebs1-158/+149
1999-05-11import gdb-1999-05-10Stan Shebs1-177/+267
1999-04-16Initial creation of sourceware repositorygdb-4_18-branchpointStan Shebs1-0/+3902
1999-04-16Initial creation of sourceware repositoryStan Shebs1-3862/+0
1998-10-28Unify (well almost) --enable-build-warnings configuration optionAndrew Cagney1-161/+361
across GDB and SIM directories.
generated by cgit v1.1 at 2024-11-22 01:53:42 +0000