aboutsummaryrefslogtreecommitdiff
path: root/sim/bfin
AgeCommit message (Collapse)AuthorFilesLines
2015-12-25sim: sim-model: build for everyoneMike Frysinger3-4/+5
Rather than include this for some targets, set it up so we can build it all the time via the common code. This makes it easier for targets to opt into it when they're ready, increases build coverage, and allows us to centralize much of the logic. We also get to delete tconfig.h from two more targets -- they were setting WITH_DEVICES to 0 which has the same behavior as not defining it at all. While the SIM_HAVE_MODEL knob is gone, we now have WITH_MODEL_P, but it is only used by the common sim-model code. We use it to declare dummy model lists when the arch hasn't created its own.
2015-12-25sim: move MACH/MODEL types into SIM_xxx namespaceMike Frysinger2-7/+12
The "MACH" and "MODEL" names are a bit generic and collide with symbols used by other sections of code (like h8300's opcodes). Since these are sim-specific types, they really should have a "SIM_" prefix.
2015-12-25sim: device_error: puntMike Frysinger2-8/+4
Only four targets implement this function, and three of them do nothing. The 4th merely calls abort. Since calls to this function are followed by calls to sim_hw_abort or sim_io_error, this is largely useless. In the two places where we don't, replace the call with sim_engine_abort. We want to kill off the WITH_DEVICES logic in favor of WITH_HW, so this is a good first step.
2015-12-24sim: make LMA loading the default for all targetsMike Frysinger2-3/+4
Most targets already default to loading code via their LMA, but for a few, this means the default changes from loading VMA to LMA. It's better to have the different targets be consistent, and allows some code clean up.
2015-11-17sim: always enable modulo memoryMike Frysinger2-4/+4
Having this be a config option doesn't make sense: the code size is pretty much the same (as all the logic is still active), and if it's disabled, the sim throws an error if you try to use it. That means we can't break sims that weren't using it before by enabling it all the time.
2015-11-16sim: sim-stop/sim-reason/sim-reg: move to common obj listMike Frysinger2-4/+6
Now that all arches (for the most part) have moved over, move sim-stop.o, sim-reason.o, and sim-reg.o to the common object list and out of all the arch ports.
2015-11-15sim: sim-close: unify sim_close logicMike Frysinger2-6/+4
Other than the nice advantage of all sims having to declare one fewer common function, this also fixes leakage in pretty much every sim. Many were not freeing any resources, and a few were inconsistent as to the ones they did. Now we have a single module that takes care of all the logic for us. Most of the non-cgen based ones could be deleted outright. The cgen ones required adding a callback to the arch-specific cleanup func. The few that still have close callbacks are to manage their internal state. We do not convert erc32, m32c, ppc, rl78, or rx as they do not use the common sim core.
2015-10-11sim: bfin: handle negative left saturated shifts as ashifts [BZ #18407]Mike Frysinger2-1/+11
When handling left saturated ashifts with negative immediates, they should be treated as right ashifts. This matches hardware behavior. Reported-by: Igor Rayak <igorr@gitatechnologies.com>
2015-06-24sim: trace: add a basic cpu register classMike Frysinger3-28/+5
The bfin/msp430 ports already had trace logic set up for reading/writing cpu registers, albeit using different unrelated levels (core & vpu). Add a proper register class for these and for other ports.
2015-06-23sim: use AS_HELP_STRING everywhereMike Frysinger2-14/+30
This helps standardize the configure --help output.
2015-06-17sim: syscall: unify memory helpersMike Frysinger2-28/+10
Almost every port implements these two callbacks in the same way, so unify them in the common layer.
2015-06-17sim: callback: add human readable strings for debugging to mapsMike Frysinger2-496/+503
When tracing, we often want to display the human readable name for the various syscall/errno values. Rather than make each target duplicate the lookup, extend the existing maps to include the string directly, and add helper functions to look up the constants. While most targets are autogenerated (from libgloss), the bfin/cris targets have custom maps for the Linux ABI which need to be updated by hand.
2015-06-12sim: bfin: expand CB_SYS_xxx commentMike Frysinger2-1/+7
2015-06-12sim: update configure.in->configure.ac docsMike Frysinger2-1/+5
A few places still refer to the configure.in file; update them.
2015-06-12sim: drop -DTRACE from configureMike Frysinger2-3/+7
No code uses this anymore and the symbol conflicts with the new TRACE helper. Punt it from configure.
2015-06-12sim: trace: add common macros for logging infoMike Frysinger6-37/+46
The Blackfin port had some TRACE_xxx macros for easily logging trace data. Use these as a base for common ones that have a simple form and match the existing sets of helper macros.
2015-04-24Fix typos in sim sources exposed by static analysis.Nick Clifton2-1/+8
bfin PR 18273 * bfin-sim.c (decode_dsp32alu_0): Remove spurious check for s == 1. erc32 PR 18273 * exec.c (add32): Fix typo in check for overflow. igen PR 18273 * misc.c (a2i): Fix typos checking for uppercase letters.
2015-04-18sim: unify SIM_CPU definitionMike Frysinger2-0/+6
Since every target typedefs this the same way, move it to the common code. We have to leave Blackfin behind here for now because of inter-dependencies on types and headers: sim-base.h includes sim-model.h which needs types in machs.h which needs types in bfim-sim.h which needs SIM_CPU.
2015-04-18sim: unify sim_cia definitionMike Frysinger2-2/+4
Almost every target defines sim_cia the same way -- either using the address_word type directly, or a type of equivalent size. The only odd one out is sh64 (who has 32bit address_word and 64bit cia), and even that case doesn't seem to make sense. We'll put off clean up though of sh64 and at least set up a sensible default for everyone.
2015-04-17sim: replace CIA_{GET,SET} with CPU_PC_{GET,SET}Mike Frysinger2-3/+4
The CIA_{GET,SET} macros serve the same function as CPU_PC_{GET,SET} except the latter adds a layer of indirection via the sim state. This lets models set up different functions at runtime and doesn't reach so directly into the arch-specific cpu state. It also doesn't make sense to have two sets of macros that do exactly the same thing, so lets standardize on the one that gets us more.
2015-04-15sim: unify sim-cpu usageMike Frysinger3-6/+6
Now that all the targets are utilizing CPU_PC_{FETCH,STORE}, and the cpu state is multicore, and the STATE_CPU defines match, we can move it all to the common code.
2015-04-13sim: fix the PKGVERSION defineMike Frysinger2-2/+6
This should be SIM, not GDB.
2015-04-06sim: move sim-engine.o/sim-hrw.o to the common listMike Frysinger2-2/+4
This makes these two objects available to all sims by default.
2015-04-02Regenerate configure in simH.J. Lu1-2/+2
* arm/configure: Regenerated. * avr/configure: Likewise. * bfin/configure: Likewise. * common/configure: Likewise. * cr16/configure: Likewise. * cris/configure: Likewise. * d10v/configure: Likewise. * erc32/configure: Likewise. * frv/configure: Likewise. * ft32/configure: Likewise. * h8300/configure: Likewise. * igen/configure: Likewise. * iq2000/configure: Likewise. * lm32/configure: Likewise. * m32c/configure: Likewise. * m32r/configure: Likewise. * m68hc11/configure: Likewise. * mcore/configure: Likewise. * microblaze/configure: Likewise. * mips/configure: Likewise. * mn10300/configure: Likewise. * moxie/configure: Likewise. * msp430/configure: Likewise. * ppc/configure: Likewise. * rl78/configure: Likewise. * rx/configure: Likewise. * sh/configure: Likewise. * sh64/configure: Likewise. * v850/configure: Likewise.
2015-04-02sim: clean up SIM_EXTRA_OBJS referencesMike Frysinger2-2/+5
This variable was deleted in previous commits and is not used anymore. Prune any stray references to it.
2015-04-01Regenerate configure in simH.J. Lu1-4/+6
* arm/configure: Regenerated. * avr/configure: Likewise. * bfin/configure: Likewise. * common/configure: Likewise. * cr16/configure: Likewise. * cris/configure: Likewise. * d10v/configure: Likewise. * erc32/configure: Likewise. * frv/configure: Likewise. * ft32/configure: Likewise. * h8300/configure: Likewise. * igen/configure: Likewise. * iq2000/configure: Likewise. * lm32/configure: Likewise. * m32c/configure: Likewise. * m32r/configure: Likewise. * m68hc11/configure: Likewise. * mcore/configure: Likewise. * microblaze/configure: Likewise. * mips/configure: Likewise. * mn10300/configure: Likewise. * moxie/configure: Likewise. * msp430/configure: Likewise. * ppc/configure: Likewise. * rl78/configure: Likewise. * rx/configure: Likewise. * sh/configure: Likewise. * sh64/configure: Likewise. * v850/configure: Likewise.
2015-04-01sim: update zlib handlingMike Frysinger3-84/+17
With zlib being mandatory, and the updated m4 configs, we need to regen and use the new settings w/bfd to avoid linkage errors.
2015-03-24sim: fix sim-hardware configure optionMike Frysinger2-6/+6
The current default handling for the --enable-sim-hardware option ends up forcing the value to whatever is set as the first argument when calling the macro (by virtue of how autoconf works). Relocate the setup code to the 4th parameter of the AC_ARG_ENABLE macro to fix it. This was caused by the simplification work in 1517bd274290e06af498ef7e49. Reported-by: Hans-Peter Nilsson <hans-peter.nilsson@axis.com>
2015-03-23sim: drop support for requiring hw supportMike Frysinger2-10/+9
Since no sim is using the "always" option to SIM_AC_OPTION_HARDWARE, and we don't want to require hw support to always be enabled, drop the option. This leads to a slight simplification in the macro too as we can collapse the sim_hw_p variable.
2015-03-23sim: dv-sockser: move build to common dirMike Frysinger4-15/+12
If dv-sockser is available, lets add it to the common SIM_HW_OBJS variable so it is always included automatically. Now ports do not have to shoe horn it in directly themselves. It does mean it will be compiled for targets that don't explicitly use it, but that's really what we want anyways.
2015-03-23sim: dv-sockser: add stub funcs when not availableMike Frysinger2-6/+5
This lets ports assume that the dv-sockser API is always available if they want to. This way we don't have to do an abort at configure time and it makes the resulting code a bit simpler.
2015-03-23sim: bfin/msp430: drop run-sim.h includeMike Frysinger2-1/+4
This header is used only with run.o, and both of these use nrun.o.
2015-03-16sim: rename tconfig.in to tconfig.hMike Frysinger5-21/+22
Rather than manually include tconfig.h when we think we'll need it (which is error prone as it can define symbols we expect from config.h), have it be included directly by config.h. Since we know we have to include that header everywhere already, this will make sure tconfig.h isn't missed. It should also be fine as tconfig.h is supposed to be simple and only set up a few core defines for the target. This allows us to stop symlinking it in place all the time and just use it straight out of the respective source directory.
2015-03-15sim: dv-sockser: push module init prototype downMike Frysinger2-12/+5
Pull out the duplicated dv_sockser_install prototype from the tconfig.in files and put it in the one place it gets used -- sim-module.c. This is still arguably incorrect, but it's better than the status quo where the tconfig.in has to include header files and duplicate the dv-sockser func. The tconfig header is meant to be simple and contain a target defines.
2015-03-14sim: bfin: fix signed warningMike Frysinger2-1/+5
Fix the type of the local var to match the function it is passed to.
2015-03-14sim: make nrun the default run programMike Frysinger2-3/+4
We want people to stop using the run.c frontend, but it's hard to notice when it's still set as the default. Lets flip things so nrun.c is the default, and users of run.c will get an error by default. We turn that error into a warning for existing sims so we don't break them -- this is mostly meant for people starting new ports.
2015-03-10sim: bfin: fix up linux-fixed-code.h generation more [PR sim/13160]Mike Frysinger2-1/+7
Add a trailing semi-colon to the sed print command as the BSD sed implementation wants it. It's a nop otherwise and works fine on GNU/etc... implementations too.
2015-03-09sim: bfin: fix bug referenceMike Frysinger1-1/+1
2015-03-09sim: bfin: fix up linux-fixed-code.h generation [PR sim/10143]Mike Frysinger2-3/+11
The use of $< ends up picking the wrong object out of the depend list. Specify the input name directly to avoid fragility. On BSD systems, we need to make sure all options come before the non-options (i.e. the files). Reported-by: Chris Johns <chrisj@rtems.org> URL: https://sourceware.org/bugzilla/show_bug.cgi?id=13160
2015-01-01Update year range in copyright notice of all files owned by the GDB project.Joel Brobecker75-75/+75
gdb/ChangeLog: Update year range in copyright notice of all files.
2014-08-19Fix --diable-shared --enable-plugins build breakageAlan Modra2-2/+64
Directories that don't use libtool need to add -ldl (on most *nix hosts) to provide dlopen for libbfd. config/ * plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to LIBS via AC_SEARCH_LIBS. gdb/ * acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl. * config.in: Regenerate. sim/ppc/ * configure.ac: Invoke AC_PLUGINS. * config.in: Regenerate. and regen lots of configure files.
2014-08-15Regenerate sim configury.Roland McGrath3-9/+52
2014-03-04sim: convert old style prototypesMike Frysinger2-7/+8
Most of these prototypes have been killed off, but we have a few left in the sim tree. Clean them up so we can enable the -W flag for it.
2014-01-07remove PARAMS from simTom Tromey1-4/+4
This removes the last uses of PARAMS from sim. 2014-01-06 Tom Tromey <tromey@redhat.com> * README-HACKING: Don't use PARAMS. * arm/wrapper.c: Don't use PARAMS. * bfin/sim-main.h: Don't use PARAMS. * common/callback.c: Don't use PARAMS. * common/cgen-trace.c: Don't use PARAMS. * common/run-sim.h: Don't use PARAMS. * common/run.c: Don't use PARAMS. * common/sim-base.h: Don't use PARAMS. * common/sim-load.c: Don't use PARAMS. * common/sim-options.h: Don't use PARAMS. * common/sim-trace.c: Don't use PARAMS. * common/sim-trace.h: Don't use PARAMS. * common/sim-utils.h: Don't use PARAMS. * cr16/cr16_sim.h: Don't use PARAMS. * cr16/gencode.c: Don't use PARAMS. * cr16/interp.c: Don't use PARAMS. * cr16/simops.c: Don't use PARAMS. * d10v/d10v_sim.h: Don't use PARAMS. * d10v/gencode.c: Don't use PARAMS. * d10v/interp.c: Don't use PARAMS. * d10v/simops.c: Don't use PARAMS. * erc32/erc32.c: Don't use PARAMS. * erc32/exec.c: Don't use PARAMS. * erc32/float.c: Don't use PARAMS. * erc32/func.c: Don't use PARAMS. * erc32/sis.c: Don't use PARAMS. * erc32/sis.h: Don't use PARAMS. * mips/interp.c: Don't use PARAMS. * mips/sim-main.h: Don't use PARAMS. * sh/interp.c: Don't use PARAMS. * v850/sim-main.h: Don't use PARAMS. * v850/v850_sim.h: Don't use PARAMS.
2014-01-01Update Copyright year range in all files maintained by GDB.Joel Brobecker75-75/+75
2013-09-23Regenerate sim configure files to pick up support for powerpc64le inAlan Modra2-5/+15
libtool.m4.
2013-06-24sim: bfin: note missing parallel handling of SEARCHMike Frysinger2-0/+18
The SEARCH insn is an oddball when it comes to parallel usage. It places a big limit on what other insns it can run in parallel with, but we don't currently track the amount of state needed to verify this (since no other insn really requires this). Add a note for now in case we get around to it.
2013-06-24sim: bfin: handle invalid HLs encoding in dsp shift insnsMike Frysinger2-5/+16
For many of the 32bit dsp shift related insns, we were just ignoring the HLs field. The hardware does not though and will reject the insn if it's set incorrectly. Update the sim to match.
2013-06-19sim: bfin: stricter insn decodingMike Frysinger2-50/+86
We wrote a test case that tries every single 32bit opcode on the hardware and compared it to the sim. There were a bunch of places in the sim where we weren't strict enough (requiring certain parts of the opcode be set) so we were treating a lot of invalid opcodes as valid ones. This sprinkles out a lot additional checks in the dsp32alu class. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2013-06-17sim: bfin: add flush/HWERR todoMike Frysinger2-0/+8
generated by cgit v1.1 at 2024-12-26 08:26:50 +0000