aboutsummaryrefslogtreecommitdiff
path: root/sim/avr/ChangeLog
AgeCommit message (Collapse)AuthorFilesLines
2017-09-06Honor an existing CC_FOR_BUILD in the environment for sim.John Baldwin1-0/+4
This matches the equivalent bits in bfd/acinclude.m4 sim/ChangeLog: * configure.ac: Honor existing CC_FOR_BUILD in environment. * configure: Regenerate. sim/aarch64/ChangeLog: * configure: Regenerate. sim/arm/ChangeLog: * configure: Regenerate. sim/avr/ChangeLog: * configure: Regenerate. sim/bfin/ChangeLog: * configure: Regenerate. sim/common/ChangeLog: * acinclude.m4 (SIM_AC_COMMON) Honor existing CC_FOR_BUILD in environment. sim/cr16/ChangeLog: * configure: Regenerate. sim/cris/ChangeLog: * configure: Regenerate. sim/d10v/ChangeLog: * configure: Regenerate. sim/erc32/ChangeLog: * configure: Regenerate. sim/frv/ChangeLog: * configure: Regenerate. sim/ft32/ChangeLog: * configure: Regenerate. sim/h8300/ChangeLog: * configure: Regenerate. sim/iq2000/ChangeLog: * configure: Regenerate. sim/lm32/ChangeLog: * configure: Regenerate. sim/m32c/ChangeLog: * configure: Regenerate. sim/m32r/ChangeLog: * configure: Regenerate. sim/m68hc11/ChangeLog: * configure: Regenerate. sim/mcore/ChangeLog: * configure: Regenerate. sim/microblaze/ChangeLog: * configure: Regenerate. sim/mips/ChangeLog: * configure: Regenerate. sim/mn10300/ChangeLog: * configure: Regenerate. sim/moxie/ChangeLog: * configure: Regenerate. sim/msp430/ChangeLog: * configure: Regenerate. sim/rl78/ChangeLog: * configure: Regenerate. sim/rx/ChangeLog: * configure: Regenerate. sim/sh/ChangeLog: * configure: Regenerate. sim/sh64/ChangeLog: * configure: Regenerate. sim/v850/ChangeLog: * configure: Regenerate.
2016-10-18sim: avr: move changelog entries to subdirMike Frysinger1-0/+7
2016-01-10sim: move many common settings from CPPFLAGS to config.hMike Frysinger1-0/+4
Rather than stuffing the command line with a bunch of -D flags, start moving things to config.h which is managed by autoheader. This makes the makefile a bit simpler and the build output tighter, and it makes the migration to automake easier as there are fewer vars to juggle. We'll want to move the other options out too, but it'll take more work.
2016-01-10sim: drop unused SIM_AC_OPTION_PACKAGESMike Frysinger1-0/+4
This was imported from the ppc sim, but that was only used to control a single file, and that is already governed by the hw models. There's no need to have a sep configure option here, especially since none of the other sims are using it. Even when the code is enabled, there's no runtime overhead.
2016-01-10sim: allow the environment configure option everywhereMike Frysinger1-0/+5
Currently ports have to call SIM_AC_OPTION_ENVIRONMENT explicitly in order to make the configure flag available. There's no real reason to not allow this flag for all ports, so move it to the common sim macro. This way we get standard behavior across all ports too.
2016-01-10sim: allow the assert configure option everywhereMike Frysinger1-0/+4
Currently ports have to call SIM_AC_OPTION_ASSERT explicitly in order to make the configure flag available, which none of them do. There's no real reason to not allow this flag for all ports, so move it to the common sim macro. This way we get standard behavior across all ports.
2016-01-10sim: drop targ-vals.def->nltvals.def indirectionMike Frysinger1-0/+4
We don't have alternative nltvals.def files, so always symlinking the targ-vals.def file to it doesn't gain us anything. It does make the build more complicated though and a pain to convert to something newer (like automake). Drop the symlinking entirely. In the future, we'll want to explode this file anyways into the respective arch dirs so things can be selected dynamically at runtime, so it's not like we'll be bringing this back.
2016-01-10sim: allow the inline configure option everywhereMike Frysinger1-0/+5
Currently ports have to call SIM_AC_OPTION_INLINE explicitly in order to make the configure flag available. There's no real reason to not allow this flag for all ports, so move it to the common sim macro. This way we get standard behavior across all ports too.
2016-01-10sim: drop --enable-sim-{regparm,stdcall} optionsMike Frysinger1-0/+4
These options were never exposed for most sims (just the ppc one), and they are really only useful on 32-bit x86 systems. Considering modern systems tend to be 64-bit x86_64 and how well modern compilers are at optimizing code, these have outlived their usefulness.
2016-01-10sim: drop --enable-sim-cflags optionMike Frysinger1-0/+4
No other sub directory provides such a configuration option, so drop it from the sim dir as well. This cleans up a good bit of code in the process. If people want to use custom flags for just the sim, they can still run configure+make by hand in the sim subdir and use the normal CFLAGS settings.
2016-01-09sim: drop common/cconfig.h in favor of a single config.hMike Frysinger1-0/+4
The common subdir sets up a cconfig.h file to hold checks for the common code. In practice, most files still end up using config.h instead which just leads to confusion. Merge all the configure checks that went into cconfig.h into SIM_AC_COMMON so we can drop the cconfig.h file altogether. Now there is only a single config.h file like normal.
2016-01-06sim: sim_{create_inferior,open,parse_args}: constify argv/env slightlyMike Frysinger1-0/+5
2016-01-03 Mike Frysinger <vapier@gentoo.org> * sim-options.c (sim_parse_args): Mark argv array const. * sim-options.h (sim_parse_args): Likewise.
2016-01-04sim: punt x86-specific bswap logicMike Frysinger1-0/+4
The compiler/C library should produce reasonable code for htonl/ntohl, and at least glibc tries pretty hard to always produce good code for them. This logic only had support for 32-bit x86 systems anymore, and it's unlikely people were even opting into this, so drop it all.
2016-01-03sim: parse_args: display getopt error ourselvesMike Frysinger1-0/+4
Fix a long standing todo where we let getopt write directly to stderr when an invalid option is passed. Use the sim io funcs instead as they go through the filtered callbacks that gdb wants.
2016-01-03sim: drop host endian configure optionMike Frysinger1-0/+5
The --enable-sim-hostendian flag was purely so people had an escape route for when cross-compiling. This is because historically, AC_C_BIGENDIAN did not work in those cases. That was fixed a while ago though, so we can require that macro everywhere now and simplify a good bit of code.
2016-01-03sim: convert to bfd_endianMike Frysinger1-0/+6
Rather than re-invent endian defines, as well as maintain our own list of OS & arch-specific includes, punt all that logic in favor of the bfd ones already set up and maintained elsewhere. We already rely on the bfd library, so leveraging the endian aspect should be fine.
2015-12-27sim: unify sim-hloadMike Frysinger1-0/+4
Pretty much all targets are using this module already, so add it to the common list of objects. The only oddball out here is cris and that's because it supports loading via an offset for all the phdrs. We drop support for that.
2015-12-26sim: punt WITH_DEVICES & tconfig.h supportMike Frysinger1-0/+4
No arch is using this anymore, and we want all new ports using the hardware framework instead. Punt WITH_DEVICES and the two callbacks device_io_{read,write}_buffer. We can also punt the tconfig.h file as no port is using it anymore. This fixes in-tree builds that get confused by picking up the wrong one (common/ vs <port>/) caused by commit ae7d0cac8ce971f7108d270c. Any port that needs to set up a global define can use their own sim-main.h file that they must provide regardless.
2015-12-15Fix invalid left shift of negative valueDominik Vogt1-0/+4
Fix occurrences of left-shifting negative constants in C code. sim/arm/ChangeLog: * thumbemu.c (handle_T2_insn): Fix left shift of negative value. * armemu.c (handle_v6_insn): Likewise. sim/avr/ChangeLog: * interp.c (sign_ext): Fix left shift of negative value. sim/mips/ChangeLog: * micromips.igen (process_isa_mode): Fix left shift of negative value. sim/msp430/ChangeLog: * msp430-sim.c (get_op, put_op): Fix left shift of negative value. sim/v850/ChangeLog: * simops.c (v850_bins): Fix left shift of negative value.
2015-11-22sim: avr: move global state to sim/cpu stateMike Frysinger1-0/+17
We don't want global variables in the sim as all state should be in the sim state or in the cpu state. This pushes down all that logic for avr.
2015-11-22sim: avr: switch to common sim-regMike Frysinger1-0/+8
This is not entirely useful as avr doesn't (yet) store its register state in the cpu state, but it does allow for switching to the common code for these functions.
2015-11-16sim: sim-stop/sim-reason/sim-reg: move to common obj listMike Frysinger1-0/+4
Now that all arches (for the most part) have moved over, move sim-stop.o, sim-reason.o, and sim-reg.o to the common object list and out of all the arch ports.
2015-11-15sim: sim-close: unify sim_close logicMike Frysinger1-0/+4
Other than the nice advantage of all sims having to declare one fewer common function, this also fixes leakage in pretty much every sim. Many were not freeing any resources, and a few were inconsistent as to the ones they did. Now we have a single module that takes care of all the logic for us. Most of the non-cgen based ones could be deleted outright. The cgen ones required adding a callback to the arch-specific cleanup func. The few that still have close callbacks are to manage their internal state. We do not convert erc32, m32c, ppc, rl78, or rx as they do not use the common sim core.
2015-06-23sim: use AS_HELP_STRING everywhereMike Frysinger1-0/+4
This helps standardize the configure --help output.
2015-06-12sim: update configure.in->configure.ac docsMike Frysinger1-0/+4
A few places still refer to the configure.in file; update them.
2015-06-12sim: drop -DTRACE from configureMike Frysinger1-0/+4
No code uses this anymore and the symbol conflicts with the new TRACE helper. Punt it from configure.
2015-04-27sim: avr: Fix 'multiple definition of sim_{read,write}'Senthil Kumar Selvaraj1-0/+5
This patch does whatever was done in https://sourceware.org/ml/gdb-patches/2015-04/msg00437.html to fix broken gdb build for the AVR target.
2015-04-18sim: unify SIM_CPU definitionMike Frysinger1-0/+4
Since every target typedefs this the same way, move it to the common code. We have to leave Blackfin behind here for now because of inter-dependencies on types and headers: sim-base.h includes sim-model.h which needs types in machs.h which needs types in bfim-sim.h which needs SIM_CPU.
2015-04-18sim: unify sim_cia definitionMike Frysinger1-0/+4
Almost every target defines sim_cia the same way -- either using the address_word type directly, or a type of equivalent size. The only odd one out is sh64 (who has 32bit address_word and 64bit cia), and even that case doesn't seem to make sense. We'll put off clean up though of sh64 and at least set up a sensible default for everyone.
2015-04-17sim: replace CIA_{GET,SET} with CPU_PC_{GET,SET}Mike Frysinger1-0/+4
The CIA_{GET,SET} macros serve the same function as CPU_PC_{GET,SET} except the latter adds a layer of indirection via the sim state. This lets models set up different functions at runtime and doesn't reach so directly into the arch-specific cpu state. It also doesn't make sense to have two sets of macros that do exactly the same thing, so lets standardize on the one that gets us more.
2015-04-16sim: avr/mcore/moxie: fill out sim-cpu pc fetch/store helpersMike Frysinger1-0/+6
This makes the common sim-cpu logic work.
2015-04-15sim: unify sim-cpu usageMike Frysinger1-0/+5
Now that all the targets are utilizing CPU_PC_{FETCH,STORE}, and the cpu state is multicore, and the STATE_CPU defines match, we can move it all to the common code.
2015-04-13sim: fix the PKGVERSION defineMike Frysinger1-0/+4
This should be SIM, not GDB.
2015-04-06sim: move sim-engine.o/sim-hrw.o to the common listMike Frysinger1-0/+4
This makes these two objects available to all sims by default.
2015-04-01sim: run: punt!Mike Frysinger1-0/+4
Now that all targets have been converted to nrun, we can finally punt this old inconsistent interface. A few stray references to the old run were sprinkled about; clean them up in the process. We leave behind the run(1) man page mostly so that we get it updated for the new nrun interface.
2015-04-01sim: update zlib handlingMike Frysinger1-0/+4
With zlib being mandatory, and the updated m4 configs, we need to regen and use the new settings w/bfd to avoid linkage errors.
2015-03-28sim: avr: convert to nrun.oMike Frysinger1-0/+32
Looks like a lot more work than actually was -- the main decode loop was de-indented by dropping the loop as a step-once function.
2015-03-16sim: rename tconfig.in to tconfig.hMike Frysinger1-0/+4
Rather than manually include tconfig.h when we think we'll need it (which is error prone as it can define symbols we expect from config.h), have it be included directly by config.h. Since we know we have to include that header everywhere already, this will make sure tconfig.h isn't missed. It should also be fine as tconfig.h is supposed to be simple and only set up a few core defines for the target. This allows us to stop symlinking it in place all the time and just use it straight out of the respective source directory.
2015-03-14sim: make nrun the default run programMike Frysinger1-0/+6
We want people to stop using the run.c frontend, but it's hard to notice when it's still set as the default. Lets flip things so nrun.c is the default, and users of run.c will get an error by default. We turn that error into a warning for existing sims so we don't break them -- this is mostly meant for people starting new ports.
2015-02-19sim: drop unused sim_kill functionMike Frysinger1-0/+4
This has been deprecated for a long time and no one calls it.
2014-08-19Fix --diable-shared --enable-plugins build breakageAlan Modra1-0/+4
Directories that don't use libtool need to add -ldl (on most *nix hosts) to provide dlopen for libbfd. config/ * plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to LIBS via AC_SEARCH_LIBS. gdb/ * acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl. * config.in: Regenerate. sim/ppc/ * configure.ac: Invoke AC_PLUGINS. * config.in: Regenerate. and regen lots of configure files.
2014-08-15Regenerate sim configury.Roland McGrath1-0/+5
2014-03-10sim: constify arg to sim_do_commandMike Frysinger1-0/+4
It is rare for people to want to modify the cmd arg. In general, they really shouldn't be, but a few still do. For those who misbehave, dupe the string locally so they can bang on it.
2014-03-05sim: constify prog_nameMike Frysinger1-2/+5
There's no need for the prog_name handed down to the core to be mutable, so add const markings to it and all the related funcs.
2013-09-23Regenerate sim configure files to pick up support for powerpc64le inAlan Modra1-0/+4
libtool.m4.
2013-06-05sim: use AM_MAINTAINER_MODEMike Frysinger1-0/+4
I noticed the sim code is using an old implementation of the maintainer logic. I cut it over to the new macro (like gdb has been doing). In practice, it makes no difference currently as nothing in the sim tree uses it, but I have a follow up commit for the Blackfin tree that needs it.
2012-06-15Define PACKAGE macro in all sims' config.h.Joel Brobecker1-0/+4
Some of the common includes in include/gdb such as callback.h include bfd.h. But there was a recent change in bfd-in.h to require that config.h be included before bfd.h can be included: /* PR 14072: Ensure that config.h is included first. */ #if !defined PACKAGE && !defined PACKAGE_VERSION #error config.h must be included before this header #endif PACKAGE_VERSION is always defined by default by the AC_INIT autoconf macro, but PACKAGE isn't. This patch updates the SIM_AC_COMMON macro to define it, and then regenerates all configure scripts and config.in files. sim/common/changeLog: * acinclude.m4 (SIM_AC_COMMON): Define PACKAGE. * config.in, configure: Regenerate. sim/ChangeLog: * configure: Regenerate. sim/arm/ChangeLog: * config.in, configure: Regenerate. sim/avr/ChangeLog: * config.in, configure: Regenerate. sim/bfin/ChangeLog: * config.in, configure: Regenerate. sim/cr16/ChangeLog: * config.in, configure: Regenerate. sim/cris/ChangeLog: * config.in, configure: Regenerate. sim/d10v/ChangeLog: * config.in, configure: Regenerate. sim/erc32/ChangeLog: * config.in, configure: Regenerate. sim/frv/ChangeLog: * config.in, configure: Regenerate. sim/h8300/ChangeLog: * config.in, configure: Regenerate. sim/iq2000/ChangeLog: * config.in, configure: Regenerate. sim/lm32/ChangeLog: * config.in, configure: Regenerate. sim/m32c/ChangeLog: * config.in, configure: Regenerate. sim/m32r/ChangeLog: * config.in, configure: Regenerate. sim/m68hc11/ChangeLog: * config.in, configure: Regenerate. sim/mcore/ChangeLog: * config.in, configure: Regenerate. sim/microblaze/ChangeLog: * config.in, configure: Regenerate. sim/mips/ChangeLog: * config.in, configure: Regenerate. sim/mn10300/ChangeLog: * config.in, configure: Regenerate. sim/moxie/ChangeLog: * config.in, configure: Regenerate. sim/ppc/ChangeLog: * configure: Regenerate. sim/rl78/ChangeLog: * config.in, configure: Regenerate. sim/rx/ChangeLog: * config.in, configure: Regenerate. sim/sh/ChangeLog: * config.in, configure: Regenerate. sim/sh64/ChangeLog: * config.in, configure: Regenerate. sim/v850/ChangeLog: * config.in, configure: Regenerate. sim/testsuite/ChangeLog: * configure: Regenerate.
2012-05-24gdb/Pedro Alves1-0/+6
2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. gdb/gdbserver/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. include/gdb/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 * gdb/signals.def: Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/arm/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/avr/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/common/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/cr16/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/d10v/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/erc32/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/m32c/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/ppc/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/rl78/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/rx/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
2012-03-24[PATCH] sim: make sure to include strsignal prototypeMike Frysinger1-0/+4
Before POSIX standardized strsignal(), old systems would hide the prototype unless the normal extension defines were enabled. So use the AC_USE_SYSTEM_EXTENSIONS helper for that. Then make sure we include string.h ourselves in nrun.c rather than relying on implicit includes via other sim headers. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-12-03sim: generate build dependencies on the flyMike Frysinger1-0/+5
Lift the code that GDB is using to generate dependencies on the fly and port it over to the sim. Now people shouldn't have to manually maintain these in their Makefile's. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
generated by cgit v1.1 at 2024-11-19 11:25:41 +0000