| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Make it easy to load the common gdbinit script even when running in
the arch/ subdir instead of the top-level sim dir.
|
|
This was left in subdirs because of the dynamic cgen usage. However,
we can move this breakpoint call to runtime and let gdb detect whether
the symbol exists.
|
|
With commit 7a259895bb2d "sim: testsuite: expand arch specific
toolchain settings", trying to use out-of-tree ld and as at test-time
broke for the "primary target", like when testing a release-tarball.
Subsequent to that commit, all assembler tests without in-tree-built
tools FAIL, getting errors when trying to call
$(abs_builddir)/../gas/as-new. But, that isn't the actual culprint;
it's actually it's its immediate predecessor, commit 8996c21067373
"sim: testsuite: setup per-port toolchain settings for multitarget
build", which hardcodes in-tree-paths to those tools instead of
considering e.g. $(<X>_FOR_TARGET), the preferred overridable variable
for single-target builds, as set up by the toplevel Makefile.
This commit calls GCC_TARGET_TOOL (a deceptive name; gcc-specific
features aren't used) from toplev/config/acx.m4, somewhat like calls
in toplev/configure.ac but without the NCN_STRICT_CHECK_TARGET_TOOLS
step, for each X to find a value for $(<X>_FOR_TARGET). N.B.: in-tree
tools still override any ${target}-${tool} found in $PATH, i.e. only
previously broken builds are affected.
The variables $(<X>_FOR_TARGET) are usually overridden by the toplevel
Makefile to the same value or better, but has to be set here too, as
automake "wants" Makefiles to be self-contained (you get an error
pointing out that the variable may be empty). If it hadn't been for
that, SIM_AC_CHECK_TOOLCHAIN_FOR_PRIMARY_TARGET would not be needed.
This detail should only (positively) affect users invoking "make
check" in sim/ instead of "make check-sim" (or "make check") at the
toplevel. Now the output from "configure" matches the target tools
actually used by sim at test-time, for the "primary target".
Using $(CC) for "example-" targets CC_FOR_TARGET is not changed, as
that appears to be a deliberate special-case.
Note that all tools still have to be installed and present in
$PATH at configure-time to be properly used at test-time.
sim:
* m4/sim_ac_toolchain.m4 (SIM_AC_CHECK_TOOLCHAIN_FOR_PRIMARY_TARGET):
New defun.
(SIM_TOOLCHAIN_VARS): Call it using AC_REQUIRE, and use variables
AS_FOR_TARGET, LD_FOR_TARGET and CC_FOR_TARGET instead of hard-coded
values.
* Makefile.in, configure: Regenerate.
|
|
This commit brings all the changes made by running gdb/copyright.py
as per GDB's Start of New Year Procedure.
For the avoidance of doubt, all changes in this commits were
performed by the script.
|
|
The ## marker tells automake to not include the comment in its
generated output, so use that in most places where the comment
only makes sense in the inputs.
|
|
These rules don't depend on the target compiler settings, so hoist
the build logic up to the common builds for better parallelization.
|
|
Break up the dejagnu logic so that we can parallelize the testsuite.
This takes a page from gcc & gdb where each .exp is run in isolation
instead of in serial.
For most targets, this doesn't make much of a difference as they only
have a single .exp. A few (like cris & frv) have multiple .exp though
and will see a bit of a speed up.
The real gain is when testing a multitarget build. This way we can
run all the targets in parallel and cut the execution time a bit.
On my system, it goes from ~155sec to ~100sec.
We can gain further speedups by splitting up some of the larger .exp
files into smaller groups. We'll do that in a followup though.
|
|
Leverage the new per-port toolchain settings to initialize the env
for eeach set of tests. This allows us to run all the tests in a
multitarget build if the user sets up the vars. If they don't, we
can still skip all the tests.
|
|
Gas does not support multitarget builds -- it still only supports
a single input & output format. ld is a bit better, but requires
manual flags to select the right output. This makes it impossible
to run the complete testsuite in a multitarget build.
To address this limitation, create a suite of FOR_TARGET variables
so these can be set to precompiled as & ld programs. It requires
a bit of setup ahead of time, but it's a one-time cost, and makes
running the full testsuite at once much easier.
|
|
Now that we've unified all the syscall tables, this file does not rely
on any port-specific settings, so move it up to building as part of the
common step so we only do it once in a multibuild.
|
|
Like we just did for pulling out the errno map, pull out the syscall
maps into a dedicated common file. Most newlib ports are using the
same syscall map, but not all, which means we have to do a bit more
work to migrate.
This commit adds the maps and switches the ports using the common
default syscall table over to it. Ports using unique syscall tables
are still using the old targ-map.c logic.
Switching common ports over is easy by checking NL_TARGET, but the
ppc code needs a bit more cleanup here hence its larger diff.
|
|
Add missing $(EXEEXT) to dependencies on bits-gen. These are actually
build-only tools, but automake doesn't allow for build & host tools, so
the rules are re-using EXEEXT.
|
|
The tests assume that the cwd is the objdir directory and write its
intermediates to there all the time. When using runtest's --objdir
setting though, this puts the files in the wrong place. This isn't
a big problem currently as we never change --objdir, but in order to
support parallel test execution, we're going to start setting that
option, so clean up the code ahead of time.
We also have to tweak some of the cris tests which were making
assumptions about the argv[0] value.
|
|
|
|
If we aren't building any sims, don't install the sim headers as they
won't be useful to anyone.
|
|
site.exp is still verbose, but that comes from automake, so have
to get it fixed upstream.
|
|
These rules don't depend on the target compiler settings, so hoist
the build logic up to the common builds for better parallelization.
We have to extend the genmloop.sh logic a bit to allow outputting
to a subdir since it always assumed cwd was the right place.
We leave the cgen maintainer rules in the subdirs for now as they
aren't normally run, and they rely on cgen logic that has not yet
been generalized.
|
|
These rules don't depend on the target compiler settings, so hoist
the build logic up to the common builds for better parallelization.
We leave the mips rules in place as they depend on complicated
arch-specific configure logic that needs to be untangled first.
|
|
These rules don't depend on the target compiler settings, so hoist
the build logic up to the common builds for better parallelization.
|
|
Now that the use of TARGET_xxx defines have been removed, we can move
this to the common logic so we only build it once for multi-targets.
|
|
Like we just did for pulling out the errno & signal maps, pull out the
open flag map into a dedicated common file. All newlib ports are using
the same map which makes it easy.
|
|
Like we just did for pulling out the errno map, pull out the signal
map into a dedicated common file. All newlib ports are using the
same signal map which makes it easy.
|
|
The current system maintains a list of target errno constants in the
nltvals.def file, then runs a build-time tool to turn that into a C
file. This list of errno values is the same for all arches, so we
don't need the arch-specific flexibility. Further, these are only
for newlib/libgloss environments, which makes it confusing to support
other userland runtimes (like Linux). Let's simplify to make this
easier to understand & build. We don't namespace the variables yet,
but sets up the framework for it.
Create a new target-newlib-errno.c template file. The template file
is hand written, but the inline map is still automatically generated.
This allows us to move it to the common set of objects so it's only
built once in a multi-target build.
Now we can remove the output from the gentmap build-time tool since
it's checked into the tree.
Then we stop including the errno lists in nltvals.def since nothing
uses it.
|
|
In preparation for this script generating more files, change the output
argument to specify a directory. This drops the stdout behavior, but
since no one really runs this tool directly, it's not a big deal.
|
|
Move these options up to the common dir so we only test & export
them once across all ports.
The setting only affects igen based ports, and they were turning
this on by default, so keep the default in place.
|
|
Now that the traps code has been unified, the configure script has no
unique logic in it, so it can be merged into the single common one.
|
|
Now that the scache logic has been migrated into the common code,
there's nothing specific in these configure scripts, so merge them
into the common one.
The frv unique logic can be moved to a dedicated include and merged
in the common configure since the flag has been scoped to the arch.
|
|
The cgen scache module is enabled by every cgen port, and with the
same default value of 16k (which matches the common default value).
Let's pull this option out of the individual ports (via CPPFLAGS)
and into the common code (via config.h).
The object itself is compiled only for cgen ports atm, so that part
doesn't change. The scache code is initialized dynamically via the
modules.c logic. That's why the profile code needs an additional
CGEN_ARCH check.
This will allow us to collapse arch configure files more. Merging
the source files will require more future work, but integrating the
cgen & non-cgen worlds itself will take a lot.
|
|
Now that the model logic has been migrated into the runtime, there's
nothing specific in the bfin configure code, so merge it into the
common one.
|
|
This kills off another compile-time option by moving the setting to
the individual arch runtimes. This will allow dynamic selection by
the arch when doing a single build with multiple arches.
The sim_model_init rework is a little funky. In the past it was
disabled entirely if no default model was set. We maintain the
spirit of the logic by gating the fallback logic on whether the
port has defined any models.
|
|
Move the unique library tests to the common code so we can delete
the erc32 configure logic entirely.
|
|
This reduces the unique logic in bfin/configure to make it easier to
(eventually) unify it entirely.
|
|
Move the unique configure flag to acinclude.m4 so the common code
can include it, then delete the rx configure logic entirely.
|
|
These ports only use the pieces that have been unified, so we can
merge them into the common configure script and get rid of their
unique one entirely.
We still compile & link separate run programs, and have dedicated
subdir Makefiles, but the configure script portion is merged.
|
|
Move these options up to the common dir so we only test & export
them once across all ports.
|
|
Move these options up to the common dir so we only test & export
them once across all ports. It makes it available to targets that
aren't cgen-based, but those will just ignore the settings, so it
shouldn't be an issue.
|
|
This will allow us to build the common code with the same inline
settings as the arch subdirs, and only do the test once.
|
|
Only one arch uses this currently, but others could too. By moving
it up to the common checks, it'll also let us simplify the moxie code
significantly.
|
|
Move these options up to the common dir so we only test & export
them once across all ports.
|
|
Move these options up to the common dir so we only test & export
them once across all ports.
|
|
Move these options up to the common dir so we only test & export
them once across all ports. It also enables -Werror usage on the
common files we've been pulling out of arch subdirs.
|
|
As we merge settings from subdirs into the common configure, we
sometimes need to keep the settings working in both dirs. Create
a makefile fragment to pass them down so we don't have to run the
checks twice. For now, the file is empty, but we'll start moving
logic in shortly.
|
|
The m4 macro has 2 args: the "wire" settings (which represents the
hardwired port behavior), and the default settings (which are used
if nothing else is specified). If none are specified, the arch is
expected to support both, and the value will be probed based on the
user runtime options or the input program.
Only two arches today set the default value (bpf & mips). We can
probably let this go as it only shows up in one scenario: the sim
is invoked, but with no inputs, and no user endian selection. This
means bpf will not behave like the other arches: an error is shown
and forces the user to make a choice. If an input program is used
though, we'll still switch the default to that. This allows us to
remove the WITH_DEFAULT_TARGET_BYTE_ORDER setting.
For the ports that set a "wire" endian, move it to the runtime init
of the respective sim_open calls. This allows us to change the
WITH_TARGET_BYTE_ORDER to purely a user-selected configure setting
if they want to force a specific endianness.
With all the endian logic moved to runtime selection, we can move
the configure call up to the common dir so we only process it once
across all ports.
The ppc arch was picking the wire endian based on the target used,
but since we weren't doing that for other biendian arches, we can
let this go too. We'll rely on the input selecting the endian, or
make the user decide.
|
|
This fixes remaking of these files and avoids unnecessary rebuilds.
Also add both to `make clean` to match other stamp files.
|
|
We only do the common code as automake simplifies the logic.
|
|
There are some functions that gnulib does not yet provide fallbacks
for, so start a common file of our own for holding existing stubs.
|
|
Since this file does not rely on any port-specific settings, move it
up to building as part of the common step so we only do it once in a
multibuild.
|
|
Currently, the sim-config module will abort if alignment settings
haven't been specified by the port's configure.ac. This is a bit
weird when we've allowed SIM_AC_OPTION_ALIGNMENT to seem like it's
optional to use. Thus everyone invokes it.
There are 4 alignment settings, but really only 2 matters: strict
and nonstrict. The "mixed" setting is just the default ("unset"),
and "forced" isn't used directly by anyone (it's available as a
runtime option for some ports).
The m4 macro has 2 args: the "wire" settings (which represents the
hardwired port behavior), and the default settings (which are used
if nothing else is specified). If none are specified, then the
build won't work (see above as if SIM_AC_OPTION_ALIGNMENT wasn't
called). If default settings are provided, then that is used, but
we allow the user to override at runtime. Otherwise, the "wire"
settings are used and user runtime options to change are ignored.
Most ports specify a default, or set the "wire" to nonstrict. A
few set "wire" to strict, but it's not clear that's necessary as
it doesn't make the code behavior, by default, any different. It
might make things a little faster, but we should provide the user
the choice of the compromises to make: force a specific mode at
compile time for faster runtime, or allow the choice at runtime.
More likely it seems like an oversight when these ports were
initially created, and/or copied & pasted from existing ports.
With all that backstory, let's get to what this commit does.
First kill off the idea of a compile-time default alignment and
set it to nonstrict in the common code. For any ports that want
strict alignment by default, that code is moved to sim_open while
initializing the sim. That means WITH_DEFAULT_ALIGNMENT can be
completely removed.
Moving the default alignment to the runtime also allows removal
of setting the "wire" settings at configure time. Which allows
removing of all arguments to SIM_AC_OPTION_ALIGNMENT and moving
that call to common code.
The macro logic can be reworked to not pass WITH_ALIGNMENT as -D
CPPFLAG and instead move it to config.h.
All of these taken together mean we can hoist the macro up to the
top level and share it among all sims so behavior is consistent
among all the ports.
|
|
Move these options up to the common dir so we only test & export
them once across all ports. The AC_INIT macro does a lot of the
heavy lifting already which allows further simplification.
|
|
Move these options up to the common dir so we only test & export
them once across all ports.
The ppc code needs a little extra care with its trace settings as
it's not exactly the same API as the common code. The other knobs
are the same though.
|
