Age | Commit message (Collapse) | Author | Files | Lines |
|
(set_szc, set_osz, set_sz): Likewise.
|
|
The testsuite subdir has a note about unifying the target->subdir logic,
so do just that. The end goal here is to have `make check` work out of
the box without having to delve into dejagnu internals.
The target-specific logic is split out of the top level configure.ac file
and into a dedicated configure.tgt similar to other subprojects (gdb and
ld and etc...) with the difference that this file has to be included at
the m4 level instead of the shell level. This is necessary only because
autoconf requires AC_CONFIG_SUBDIRS be given a string literal and not a
variable value.
Then the toplevel and the testsuite configure files pull this in, the sim
subdir gets expanded into testsuite/site.exp, and the default sim run code
uses this info to set the sim path to the local compiled run file if it
hasn't already been specified.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
I found the documentation lacking in many places, so I tried filling in a
lot of holes that I personally fell into.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
|
|
/:
* libtool.m4: Sync from git Libtool.
* ltmain.sh: Likewise.
* ltoptions.m4: Likewise.
* ltversion.m4: Likewise.
* lt~obsolete.m4: Likewise.
sim/iq2000/:
* configure: Regenerate.
sim/d10v/:
* configure: Regenerate.
sim/m32r/:
* configure: Regenerate.
sim/frv/:
* configure: Regenerate.
sim/:
* avr/configure: Regenerate.
* cris/configure: Regenerate.
* microblaze/configure: Regenerate.
sim/h8300/:
* configure: Regenerate.
sim/mn10300/:
* configure: Regenerate.
sim/erc32/:
* configure: Regenerate.
sim/arm/:
* configure: Regenerate.
sim/m68hc11/:
* configure: Regenerate.
sim/lm32/:
* configure: Regenerate.
sim/sh64/:
* configure: Regenerate.
sim/v850/:
* configure: Regenerate.
sim/cr16/:
* configure: Regenerate.
sim/moxie/:
* configure: Regenerate.
sim/m32c/:
* configure: Regenerate.
sim/mips/:
* configure: Regenerate.
sim/mcore/:
* configure: Regenerate.
sim/sh/:
* configure: Regenerate.
gprof/:
* Makefile.in: Regenerate.
* configure: Regenerate.
opcodes/:
* Makefile.in: Regenerate.
* configure: Regenerate.
gas/:
* Makefile.in: Regenerate.
* configure: Regenerate.
* doc/Makefile.in: Regenerate.
ld/:
* configure: Regenerate.
gdb/testsuite/:
* gdb.cell/configure: Regenerate.
binutils/:
* Makefile.in: Regenerate.
* configure: Regenerate.
* doc/Makefile.in: Regenerate.
bfd/:
* Makefile.in: Regenerate.
* configure: Regenerate.
bfd/doc/:
* Makefile.in: Regenerate.
|
|
|
|
|
|
* mloop.in: Fix copyright update snafu.
iq2000/
* mloop.in: Fix copyright update snafu.
|
|
* common/common.m4: Use AM_ZLIB to check for zlib support.
* ppc/configure.ac: Likewise.
* arm/configure, avr/configure, common/configure, cr16/configure,
cris/configure, d10v/configure, erc32/configure, frv/configure,
h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
m32r/configure, m68hc11/configure, mcore/configure,
microblaze/configure, mips/configure, mn10300/configure,
moxie/configure, ppc/configure, sh/configure, sh64/configure,
v850/configure: Regenerate.
|
|
* rx: New directory.
* configure.ac: Add entry for Renesas RX.
* configure: Regenerate.
[include/gdb]
* sim-rx.h: New.
|
|
(EXTRACT_LSB0_LGSINT, EXTRACT_LSB0_LGUINT): Define.
(EXTRACT_FN, SEMANTIC_FN): Use CGEN_INSN_WORD in prototype
instead of CGEN_INSN_INT.
plus, cgen files: Regenerate.
|
|
* avr/interp.c (sim_write): Allow byte access.
(sim_read): Ditto.
|
|
* avr/interp.c (sim_load): Clear memory before loading.
|
|
* avr/interp.c (sim_resume): Fix typo for OP_ret.
|
|
* cris/arch.h: Regenerate.
* cris/cpuall.h: Regenerate.
* cris/cpuv10.c: Regenerate.
* cris/cpuv10.h: Regenerate.
* cris/cpuv32.c: Regenerate.
* cris/cpuv32.h: Regenerate.
* cris/cris-desc.c: Regenerate.
* cris/cris-desc.h: Regenerate.
* cris/cris-opc.h: Regenerate.
* cris/decodev10.c: Regenerate.
* cris/decodev10.h: Regenerate.
* cris/decodev32.c: Regenerate.
* cris/decodev32.h: Regenerate.
* cris/modelv10.c: Regenerate.
* cris/modelv32.c: Regenerate.
* cris/semcrisv10f-switch.c: Regenerate.
* cris/semcrisv32f-switch.c: Regenerate.
|
|
* avr/interp.c (sim_stop): Return 1.
|
|
|
|
|
|
|
|
|
|
* configure: Add microblaze-*.* (not regenerated).
* configure.ac: Likewise.
* microblaze/config.in: New.
* microblaze/configure: Generate.
* microblaze/configure.ac: New.
* microblaze/interp.c: New.
* microblaze/Makefile.in: New.
* microblaze/microblaze.h: New.
* microblaze/microblaze.isa: New.
* microblaze/sim-main.h: New.
* microblaze/sysdep.h: New.
|
|
config/:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump to 2.64.
/:
* configure: Regenerate.
etc/:
* configure: Regenerate.
sim/common/:
* config.in: Regenerate.
* configure: Likewise.
sim/iq2000/:
* config.in: Regenerate.
* configure: Likewise.
sim/d10v/:
* config.in: Regenerate.
* configure: Likewise.
sim/igen/:
* config.in: Regenerate.
* configure: Likewise.
sim/m32r/:
* config.in: Regenerate.
* configure: Likewise.
sim/frv/:
* config.in: Regenerate.
* configure: Likewise.
sim/:
* avr/config.in: Regenerate.
* avr/configure: Likewise.
* configure: Likewise.
* cris/config.in: Likewise.
* cris/configure: Likewise.
sim/h8300/:
* config.in: Regenerate.
* configure: Likewise.
sim/mn10300/:
* config.in: Regenerate.
* configure: Likewise.
sim/ppc/:
* config.in: Regenerate.
* configure: Likewise.
sim/erc32/:
* config.in: Regenerate.
* configure: Likewise.
sim/arm/:
* config.in: Regenerate.
* configure: Likewise.
sim/m68hc11/:
* config.in: Regenerate.
* configure: Likewise.
sim/lm32/:
* config.in: Regenerate.
* configure: Likewise.
sim/sh64/:
* config.in: Regenerate.
* configure: Likewise.
sim/v850/:
* config.in: Regenerate.
* configure: Likewise.
sim/cr16/:
* config.in: Regenerate.
* configure: Likewise.
sim/moxie/:
* config.in: Regenerate.
* configure: Likewise.
sim/m32c/:
* config.in: Regenerate.
* configure: Likewise.
sim/mips/:
* config.in: Regenerate.
* configure: Likewise.
sim/mcore/:
* config.in: Regenerate.
* configure: Likewise.
sim/testsuite/d10v-elf/:
* configure: Regenerate.
sim/testsuite/:
* configure: Regenerate.
sim/testsuite/frv-elf/:
* configure: Regenerate.
sim/testsuite/m32r-elf/:
* configure: Regenerate.
sim/testsuite/mips64el-elf/:
* configure: Regenerate.
sim/sh/:
* config.in: Regenerate.
* configure: Likewise.
gold/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
* testsuite/Makefile.in: Likewise.
gprof/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* configure: Likewise.
* gconfig.in: Likewise.
opcodes/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
gas/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
* doc/Makefile.in: Likewise.
ld/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
gdb/:
* aclocal.m4: Regenerate.
* config.in: Likewise.
* configure: Likewise.
* gnulib/Makefile.in: Likewise.
gdb/doc/:
* configure: Regenerate.
gdb/gdbserver/:
* aclocal.m4: Regenerate.
* config.in: Likewise.
* configure: Likewise.
gdb/testsuite/:
* configure: Regenerate.
* gdb.hp/configure: Likewise.
* gdb.hp/gdb.aCC/configure: Likewise.
* gdb.hp/gdb.base-hp/configure: Likewise.
* gdb.hp/gdb.compat/configure: Likewise.
* gdb.hp/gdb.defects/configure: Likewise.
* gdb.hp/gdb.objdbg/configure: Likewise.
* gdb.stabs/configure: Likewise.
binutils/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
* doc/Makefile.in: Likewise.
bfd/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
bfd/doc/:
* Makefile.in: Regenerate.
readline/:
* configure: Regenerate.
readline/examples/rlfe/:
* configure: Regenerate.
|
|
readline/examples/rlfe/:
* configure.in: m4_include toplevel config/override.m4.
* configure: Regenerate.
readline/ChangeLog.gdb:
* configure.in: m4_include toplevel config/override.m4.
* configure: Regenerate.
sim/:
* configure.ac: m4_include toplevel config/override.m4.
* configure: Regenerate.
* avr/configure: Regenerate.
* cris/configure: Regenerate.
sim/common/:
* aclocal.m4: m4_include toplevel config/override.m4.
* configure: Regenerate.
sim/iq2000/:
* configure: Regenerate.
sim/d10v/:
* configure: Regenerate.
sim/igen/:
* configure: Regenerate.
sim/m32r/:
* configure: Regenerate.
sim/frv/:
* configure: Regenerate.
sim/h8300/:
* configure: Regenerate.
sim/mn10300/:
* configure: Regenerate.
sim/ppc/:
* configure: Regenerate.
sim/erc32/:
* configure: Regenerate.
sim/arm/:
* configure: Regenerate.
sim/m68hc11/:
* configure: Regenerate.
sim/lm32/:
* configure: Regenerate.
sim/sh64/:
* configure: Regenerate.
sim/v850/:
* configure: Regenerate.
sim/cr16/:
* configure: Regenerate.
sim/moxie/:
* configure: Regenerate.
sim/m32c/:
* configure: Regenerate.
sim/mips/:
* configure: Regenerate.
sim/mcore/:
* configure: Regenerate.
sim/sh/:
* configure: Regenerate.
|
|
* Makefile.in (datarootdir): New variable.
sim/common/
* Makefile.in (datarootdir): New variable.
sim/igen/
* Makefile.in (datarootdir): New variable.
sim/ppc/
* Makefile.in (datarootdir): New variable.
readline/
* Makefile.in (datarootdir): New variable.
* doc/Makefile.in (datarootdir): New variable.
* shlib/Makefile.in (datarootdir): New variable.
gdb/gdbserver/
* Makefile.in (datarootdir): New variable.
|
|
2009-05-18 Jon Beniston <jon@beniston.com>
* MAINTAINERS: Add lm32 target.
* Makefile.in: Add lm32 dependencies.
* NEWS: Indicate lm32 is a new target.
* configure.tgt: Add lm32 targets.
* lm32-tdep.c: New file.
gdb/testsuite
2009-05-18 Jon Beniston <jon@beniston.com>
* gdb.asm/asm-source.exp: Add lm32 target.
include/gdb/
2009-05-18 Jon Beniston <jon@beniston.com>
* sim-lm32.h: New file.
sim/
2009-05-18 Jon Beniston <jon@beniston.com>
* MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
* configure.ac: Add lm32 target.
* lm32: New directory.
sim/common
2009-05-18 Jon Beniston <jon@beniston.com>
* gennltvals.sh: Add lm32 target.
* nltvals.def: Add lm32 syscall definitions.
sim/lm32/
2009-05-18 Jon Beniston <jon@beniston.com>
* Makefile.in: New file.
* arch.c: New file.
* arch.h: New file.
* config.in: New file.
* configure: New file.
* configure.ac: New file.
* cpu.c: New file.
* cpu.h: New file.
* cpuall.h: New file.
* decode.c: New file.
* decode.h: New file.
* dv-lm32cpu.c: New file.
* dv-lm32timer.c: New file.
* dv-lm32uart.c: New file.
* lm32.c: New file.
* lm32-sim.h: New file.
* mloop.in: New file.
* model.c: New file.
* sem.c: New file.
* sem-switch.c: New file.
* sim-if.c: New file.
* sim-main.c: New file.
* tconfig.in: New file.
* traps.c: New file.
* user.c: New file.
|
|
* MAINTAINERS: Orphan ppc.
|
|
m32c_signal_to_target. Change signal return values from SIGILL,
SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
TARGET_SIGNAL_SEGV, etc. Fix all callers.
|
|
|
|
* avr: New directory.
* avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
* avr/config.in: New file, generated by autoheader.
* avr/configure: New file generated by autoconf.
* configure.ac: Add avr.
* configure: Regenerated.
|
|
2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
* configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
* configure: Regenerate.
* Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from
configure substitutions.
(FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir.
gdb/doc:
2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
* Makefile.in: Set pdfdir and htmldir from configure
substitutions.
* configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
* configure: Regenerate.
readline:
2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
* Makefile.in: Add html target. Add dummy install-html and
install-pdf targets.
sim:
2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
* Makefile.in: Add dummy install-pdf, html, and
install-html targets.
|
|
(cris_start_address, cris_program_offset): New variables.
(OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
enums.
(cris_options): New options --cris-program-offset and
--cris-start-address.
(cris_option_handler): Handle new options.
(cris_program_offset_write, cris_set_section_offset_iterator)
(cris_offset_sections, cris_offset_sections): New functions.
(sim_load): Use cris_program_offset_write as function argument to
cris_load_elf_file, not sim_write.
(struct offsetinfo): New struct.
(cris_handle_interpreter): Fix typo in comment.
(sim_open): Call cris_offset_sections as soon as the bfd of the
infile is available. Gate bfd validity checks on abfd non-NULL.
(sim_create_inferior): Let cris_start_address when != -1 override
other start-address choices.
|
|
(create_map): Make -1 imply a non-fixed address, not 0. All
callers changed. Only prefer the next higher unmapped address if
the last mapped address is no less than 0x40000000. Check that
the address to be mapped is not already mapped. Update head
comment.
(unmap_pages): Don't call abort when recursive call fails, just
note and return an error if a page in the range couldn't be unmapped.
(cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
(schedule, make_first_thread, cris_pipe_empty): New local variable sd.
(cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
non-MAP_FIXED argument overlapping existing map. For MAP_FIXED,
don't abort on page not being mapped. Handle non-anon filemap
with length padded to pagesize.
|
|
(TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
(TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
(TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
(TARGET_AT_CLKTCK): Remove redundant macros.
(AUX_ENT): Adjust to use standard ELF AT_* macros.
(AUX_ENTF): Ditto. Remove always-0 middle argument. Update all
callers.
(sim_open): Also pass AT_SECURE.
|
|
set_target_thread_data.
* cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
* cris/crisv10f.c: Ditto.
* cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
(MY (f_specific_init)): Set new _sim_cpu member to new function.
* cris/traps.c (TARGET_SYS_set_thread_area): Define.
(cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
case.
|
|
(cris_break_13_handler): Handle it like the exit for the last
thread.
|
|
(TARGET_EPOCH): Update to match TARGET_UTSNAME. Correct comment.
(cris_break_13_handler) <case TARGET_SYS_uname>: Update to
2.6.27. Set machine field to the BFD printable name of the
machine.
|
|
<case TARGET_SYS_mmap2>: Handle TARGET_MAP_DENYWRITE.
|
|
(TARGET_X_OK, TARGET_F_OK): Define.
(cris_break_13_handler) <case TARGET_SYS_access>: New case.
|
|
|
|
just a short CRIS-specific notice. Tweak the wording for a
failing architecture test.
|
|
(is_mapped_only, cris_dump_map): New functions.
(cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
and prot combinations and a non-zero page-offset. If
TARGET_MAP_FIXED, unmap pages before mapping them.
<case TARGET_SYS_mprotect>: When checking, allow any length
argument. Don't actually do anything.
<case TARGET_SYS_writev>: New case.
|
|
* cris/sim-if.c: Include elf-bfd.h.
(struct progbounds): New members end_loadmem, start_nonloadmem.
(xprintf, eprintf): New functions, copied from common/sim-load.c.
(cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
(get_progbounds_iterator): Renamed from get_progbounds. Make
static. Update head comment. Set new struct progbounds members.
(exec_load_addr, interp_load_addr, interp_start_addr): New static
variables.
(aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
(aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
functions.
(sim_open): New constant array auxv_entries. Rewrite AUX_ENT
handling to use auxv_entries. Improve error message and checking
for invalid programs. Use new variable abfd for the program
instead of for each access reaching into sd to get it.
(sim_create_inferior): If non-zero, use interp_start_addr instead
of the program start address.
(cris_disassemble_insn): Remove incorrect and unclear, supposedly
stale comment. Always specify little-endian.
|
|
command interpreter to use to run the input file. This is
necessary because otherwise SHELL is taken from the user's
environment, and not from the makefile that invoked this script
and the user might not be running an sh-like shell.
* cris/Makefile.in: Pass -shell parameter to genmloop.sh.
* fr30/Makefile.in: Likewise.
* frv/Makefile.in: Likewise.
* i960/Makefile.in: Likewise.
* iq2000/Makefile.in: Likewise.
* m32r/Makefile.in: Likewise.
* frv/mloop.in: Add missing start of line comment marker.
|
|
* cris/config.in: Ditto.
|
|
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* cris/configure: Regenerate.
sim/common:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* aclocal.m4: Include ../../config/acx.m4.
* common.m4: Use ACX_PKGVERSION and ACX_BUGURL.
* configure, config.in: Regenerate.
* Make-common.in (LIB_OBJS): Add version.o.
(version.c, version.o): New rules.
* run.c: Include version.h.
(usage): Add help parameter. Print output either to stdout or
stderr depending on that parameter.
(print_version): New.
(main): Check for --help and --version.
* run-sim.h (sim_target_display_usage): Add help parameter.
* version.h: New.
sim/arm:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
* wrapper.c (sim_target_display_usage): Add help parameter.
sim/cr16:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/d10v:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/erc32:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/frv:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/h8300:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/iq2000:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/m32c:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/m32r:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/m68hc11:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/mcore:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/mips:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/mn10300:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/ppc:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure.ac: Use ACX_PKGVERSION and ACX_BUGURL.
* configure, config.in: Regenerated.
* Makefile.in (LIB_OBJ): Add version.o.
(version.c, version.o): New rules.
* psim.c (psim_usage): Add help parameter. Print the bug URL.
Exit with code 0 for help.
(psim_options): Update calls to psim_usage. Handle --help and
--version.
* psim.h (psim_usage): Update prototype.
* main.c (main): Update psim_usage call.
sim/sh:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/sh64:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/v850:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
|
|
|
|
ChangeLog:
Add simulator for National cr16 processor.
* cr16: New directory with cr16 simulator files.
* configure.ac: Add an entry for National cr16 target.
* configure: Regenerate.
|
|
|
|
* configure.ac (v850): V850 now has a testsuite.
* configure (v850): Likewise.
Index: testsuite/ChangeLog
* sim/v850/: New directory.
* sim/v850/allinsns.exp: New.
* sim/v850/bsh.cgs: New.
* sim/v850/div.cgs: New.
* sim/v850/divh.cgs: New.
* sim/v850/divh_3.cgs: New.
* sim/v850/divhu.cgs: New.
* sim/v850/divu.cgs: New.
* sim/v850/sar.cgs: New.
* sim/v850/satadd.cgs: New.
* sim/v850/satsub.cgs: New.
* sim/v850/satsubi.cgs: New.
* sim/v850/satsubr.cgs: New.
* sim/v850/shl.cgs: New.
* sim/v850/shr.cgs: New.
* sim/v850/testutils.cgs: New.
* sim/v850/testutils.inc: New.
Index: v850/ChangeLog
* simops.c (OP_C0): Correct saturation logic.
(OP_220): Likewise.
(OP_A0): Likewise.
(OP_660): Likewise.
(OP_80): Likewise.
* simops.c (OP_2A0): If the shift count is zero, clear the
carry.
(OP_A007E0): Likewise.
(OP_2C0): Likewise.
(OP_C007E0): Likewise.
(OP_280): Likewise.
(OP_8007E0): Likewise.
* simops.c (OP_2C207E0): Correct PSW flags for special divu
conditions.
(OP_2C007E0): Likewise, for div.
(OP_28207E0): Likewise, for divhu.
(OP_28007E0): Likewise, for divh. Also, sign-extend the correct
operand.
* v850.igen (divh): Likewise, for 2-op divh.
* v850.igen (bsh): Fix carry logic.
|
|
|