Age | Commit message (Collapse) | Author | Files | Lines |
|
PR target/ 19401
* avr/interp.c (step_once): Pass break instruction address to
sim_engine_halt function which writes that to PC. Remove code that
follows that function call as it is unreachable.
|
|
|
|
ld/ChangeLog:
* sh/interp.c (sim_memory_size): Default init to 30.
(parse_and_set_memory_size): Adjust upper bound to 31.
sim/ChangeLog:
* sh/interp.c (sim_memory_size): Default init to 30.
(parse_and_set_memory_size): Adjust upper bound to 31.
|
|
Complement commit 26e0f8dbd817 ("* MAINTAINERS: Remove Thiemo Seufer.").
* MAINTAINERS (Past sim maintainers): Add Thiemo Seufer.
|
|
Now that cconfig.h doesn't exist, there's no need to build in the common
subdir anymore. We leave the configure/Makefile files in there as there
is a helper for developers to generate the nltvals.def file. Once that
gets cleaned up in the future though, we can drop the build logic too.
|
|
The common subdir sets up a cconfig.h file to hold checks for the common
code. In practice, most files still end up using config.h instead which
just leads to confusion.
Merge all the configure checks that went into cconfig.h into SIM_AC_COMMON
so we can drop the cconfig.h file altogether. Now there is only a single
config.h file like normal.
|
|
|
|
The simulator is including syscall.h which is not standard and apparently
not required (builds correctly without it on my machine).
|
|
No arch is using this anymore, and we want all new ports using the
hardware framework instead. Punt WITH_DEVICES and the two callbacks
device_io_{read,write}_buffer.
We can also punt the tconfig.h file as no port is using it anymore.
This fixes in-tree builds that get confused by picking up the wrong
one (common/ vs <port>/) caused by commit ae7d0cac8ce971f7108d270c.
Any port that needs to set up a global define can use their own
sim-main.h file that they must provide regardless.
|
|
|
|
* aarch64/simulator.c (system_get): New function. Provides read
access to the dczid system register.
(do_mrs): New function - implements the MRS instruction.
(dexSystem): Call do_mrs for the MRS instruction. Halt on
unimplemented system instructions.
|
|
sim * configure.tgt: Add aarch64 entry.
* configure: Regenerate.
* sim/aarch64/configure.ac: New configure template.
* sim/aarch64/aclocal.m4: Generate.
* sim/aarch64/config.in: Generate.
* sim/aarch64/configure: Generate.
* sim/aarch64/cpustate.c: New file - functions for accessing
AArch64 registers.
* sim/aarch64/cpustate.h: New header.
* sim/aarch64/decode.h: New header.
* sim/aarch64/interp.c: New file - interface between GDB and
simulator.
* sim/aarch64/Makefile.in: New makefile template.
* sim/aarch64/memory.c: New file - functions for simulating
aarch64 memory accesses.
* sim/aarch64/memory.h: New header.
* sim/aarch64/sim-main.h: New header.
* sim/aarch64/simulator.c: New file - aarch64 simulator
functions.
* sim/aarch64/simulator.h: New header.
include/gdb * sim-aarch64.h: New file.
sim/test * configure: Regenerate.
* sim/aarch64: New directory.
|
|
|
|
This helps standardize the configure --help output.
|
|
A few places still refer to the configure.in file; update them.
|
|
* arm/configure: Regenerated.
* avr/configure: Likewise.
* bfin/configure: Likewise.
* common/configure: Likewise.
* cr16/configure: Likewise.
* cris/configure: Likewise.
* d10v/configure: Likewise.
* erc32/configure: Likewise.
* frv/configure: Likewise.
* ft32/configure: Likewise.
* h8300/configure: Likewise.
* igen/configure: Likewise.
* iq2000/configure: Likewise.
* lm32/configure: Likewise.
* m32c/configure: Likewise.
* m32r/configure: Likewise.
* m68hc11/configure: Likewise.
* mcore/configure: Likewise.
* microblaze/configure: Likewise.
* mips/configure: Likewise.
* mn10300/configure: Likewise.
* moxie/configure: Likewise.
* msp430/configure: Likewise.
* ppc/configure: Likewise.
* rl78/configure: Likewise.
* rx/configure: Likewise.
* sh/configure: Likewise.
* sh64/configure: Likewise.
* v850/configure: Likewise.
|
|
* common/Make-common.in (CSEARCH): Remove $(ZLIBINC).
(BFD_LIB): Remove $(ZLIB).
(CONFIG_LIBS): Add $(ZLIB).
* ppc/Makefile.in (ZLIBINC): Removed.
(INCLUDES): Remove $(ZLIBINC).
(BFD_LIB): Remove $(ZLIB).
|
|
* arm/configure: Regenerated.
* avr/configure: Likewise.
* bfin/configure: Likewise.
* common/configure: Likewise.
* cr16/configure: Likewise.
* cris/configure: Likewise.
* d10v/configure: Likewise.
* erc32/configure: Likewise.
* frv/configure: Likewise.
* ft32/configure: Likewise.
* h8300/configure: Likewise.
* igen/configure: Likewise.
* iq2000/configure: Likewise.
* lm32/configure: Likewise.
* m32c/configure: Likewise.
* m32r/configure: Likewise.
* m68hc11/configure: Likewise.
* mcore/configure: Likewise.
* microblaze/configure: Likewise.
* mips/configure: Likewise.
* mn10300/configure: Likewise.
* moxie/configure: Likewise.
* msp430/configure: Likewise.
* ppc/configure: Likewise.
* rl78/configure: Likewise.
* rx/configure: Likewise.
* sh/configure: Likewise.
* sh64/configure: Likewise.
* v850/configure: Likewise.
|
|
Since the testsuite subdir has to handle dynamic arch values already,
there's no real value in requiring arches to opt in to it. Most have
a testsuite now anyways, and we're requiring it in the future.
|
|
Just enough to know the sim isn't totally broken.
|
|
FT32 is a new high performance 32-bit RISC core developed by FTDI for
embedded applications.
|
|
Rather than manually include tconfig.h when we think we'll need it (which
is error prone as it can define symbols we expect from config.h), have it
be included directly by config.h. Since we know we have to include that
header everywhere already, this will make sure tconfig.h isn't missed.
It should also be fine as tconfig.h is supposed to be simple and only set
up a few core defines for the target.
This allows us to stop symlinking it in place all the time and just use
it straight out of the respective source directory.
|
|
Move several items from sim/ChangeLog to sim/*/ChangeLog. Also remove
the incorrect white space in sim/common/ChangeLog.
|
|
Or there will be memory leak.
2015-02-02 Chen Gang <gang.chen.5i5j@gmail.com>
* microblaze/interp.c (sim_do_command): Call freeargv() before
return.
|
|
Or there will be memory leak.
2015-02-02 Chen Gang <gang.chen.5i5j@gmail.com>
* mcore/interp.c (sim_do_command): Call freeargv() before return.
|
|
After successfully call buildargv(), the code need to be sure of calling
freeargv() in any cases.
2015-02-02 Chen Gang <gang.chen.5i5j@gmail.com>
* common/sim-options.c (sim_args_command): Call freeargv() when
failure occurs.
|
|
2014-07-01 Chen Gang <gang.chen.5i5j@gmail.com>
* sim/microblaze/interp.c: Use long int format instead of int
format to avoid compiling warnings.
|
|
|
|
The current sim lacks any sort of tests. Start a basic framework and
add a simple one to test the add insn.
|
|
Remove the obsolete VA_* macros from sim.
2014-01-06 Tom Tromey <tromey@redhat.com>
* common/cgen-trace.c: Don't use old VA_* macros.
* common/sim-load.c (xprintf): Likewise.
* common/sim-trace.c (trace_printf, debug_printf): Likewise.
|
|
This removes the last uses of PARAMS from sim.
2014-01-06 Tom Tromey <tromey@redhat.com>
* README-HACKING: Don't use PARAMS.
* arm/wrapper.c: Don't use PARAMS.
* bfin/sim-main.h: Don't use PARAMS.
* common/callback.c: Don't use PARAMS.
* common/cgen-trace.c: Don't use PARAMS.
* common/run-sim.h: Don't use PARAMS.
* common/run.c: Don't use PARAMS.
* common/sim-base.h: Don't use PARAMS.
* common/sim-load.c: Don't use PARAMS.
* common/sim-options.h: Don't use PARAMS.
* common/sim-trace.c: Don't use PARAMS.
* common/sim-trace.h: Don't use PARAMS.
* common/sim-utils.h: Don't use PARAMS.
* cr16/cr16_sim.h: Don't use PARAMS.
* cr16/gencode.c: Don't use PARAMS.
* cr16/interp.c: Don't use PARAMS.
* cr16/simops.c: Don't use PARAMS.
* d10v/d10v_sim.h: Don't use PARAMS.
* d10v/gencode.c: Don't use PARAMS.
* d10v/interp.c: Don't use PARAMS.
* d10v/simops.c: Don't use PARAMS.
* erc32/erc32.c: Don't use PARAMS.
* erc32/exec.c: Don't use PARAMS.
* erc32/float.c: Don't use PARAMS.
* erc32/func.c: Don't use PARAMS.
* erc32/sis.c: Don't use PARAMS.
* erc32/sis.h: Don't use PARAMS.
* mips/interp.c: Don't use PARAMS.
* mips/sim-main.h: Don't use PARAMS.
* sh/interp.c: Don't use PARAMS.
* v850/sim-main.h: Don't use PARAMS.
* v850/v850_sim.h: Don't use PARAMS.
|
|
|
|
2013-11-07 Will Newton <will.newton@linaro.org>
PR gdb/15508
* arm/wrapper.c (sim_create_inferior): Call init before
accessing STATE.
|
|
2013-11-07 Will Newton <will.newton@linaro.org>
PR gdb/9195
* arm/wrapper.c (sim_create_inferior): Avoid calling
bfd_get_mach with a NULL bfd.
|
|
* configure.tgt: Add it.
* configure: Regenerate.
* gennltvals.sh: Add msp430 support.
* nltvals.def: Regenerate.
* Makefile.in: New.
* aclocal.m4: Generate.
* config.in: Generate.
* configure.ac: New.
* configure: Generate.
* msp430-sim.c: New.
* msp430-sim.h: New.
* sim-main.h: New.
* trace.c: New.
* trace.h: New.
|
|
... where it belongs.
|
|
* ppc-instructions (isel): New instruction.
|
|
2013-03-15 Steve Ellcey <sellcey@mips.com>
* remote-sim.c (sim_command_completer): Make char arguments const.
include:
2013-03-15 Steve Ellcey <sellcey@mips.com>
* gdb/remote-sim.h (sim_command_completer): Make char arguments const.
sim:
2013-03-15 Steve Ellcey <sellcey@mips.com>
* arm/wrapper.c (sim_complete_command): Make char arguments const.
* avr/interp.c (sim_complete_command): Ditto.
* common/sim-options.c (sim_complete_command): Ditto.
* cr16/interp.c (sim_complete_command): Ditto.
* erc32/interf.c (sim_complete_command): Ditto.
* m32c/gdb-if.c (sim_complete_command): Ditto.
* microblaze/interp.c (sim_complete_command): Ditto.
* ppc/sim_calls.c (sim_complete_command): Ditto.
* rl78/gdb-if.c (sim_complete_command): Ditto.
* rx/gdb-if.c (sim_complete_command): Ditto.
* sh/interp.c (sim_complete_command): Ditto.
|
|
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
|
sim/ChangeLog:
Update old contact info in GPL license notices.
|
|
gdb/sim/ChangeLog:
Update the non-FSF-copyrighted files in sim to GPLv3 or later.
|
|
* common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
condition.
* common/acinclude.m4: Define lt_cv_dlopen_libs.
* arm/configure: Regenerate.
* avr/configure: Regenerate.
* bfin/configure: Regenerate.
* common/configure: Regenerate.
* cr16/configure: Regenerate.
* cris/configure: Regenerate.
* d10v/configure: Regenerate.
* erc32/configure: Regenerate.
* frv/configure: Regenerate.
* h8300/configure: Regenerate.
* igen/configure: Regenerate.
* iq2000/configure: Regenerate.
* lm32/configure: Regenerate.
* m32c/configure: Regenerate.
* m32r/configure: Regenerate.
* m68hc11/configure: Regenerate.
* mcore/configure: Regenerate.
* microblaze/configure: Regenerate.
* mips/configure: Regenerate.
* mn10300/configure: Regenerate.
* moxie/configure: Regenerate.
* ppc/configure: Regenerate.
* rl78/configure: Regenerate.
* rx/configure: Regenerate.
* sh/configure: Regenerate.
* sh64/configure: Regenerate.
* testsuite/configure: Regenerate.
* v850/configure: Regenerate.
|
|
|
|
|
|
Some of the common includes in include/gdb such as callback.h
include bfd.h. But there was a recent change in bfd-in.h to
require that config.h be included before bfd.h can be included:
/* PR 14072: Ensure that config.h is included first. */
#if !defined PACKAGE && !defined PACKAGE_VERSION
#error config.h must be included before this header
#endif
PACKAGE_VERSION is always defined by default by the AC_INIT autoconf
macro, but PACKAGE isn't. This patch updates the SIM_AC_COMMON macro
to define it, and then regenerates all configure scripts and config.in
files.
sim/common/changeLog:
* acinclude.m4 (SIM_AC_COMMON): Define PACKAGE.
* config.in, configure: Regenerate.
sim/ChangeLog:
* configure: Regenerate.
sim/arm/ChangeLog:
* config.in, configure: Regenerate.
sim/avr/ChangeLog:
* config.in, configure: Regenerate.
sim/bfin/ChangeLog:
* config.in, configure: Regenerate.
sim/cr16/ChangeLog:
* config.in, configure: Regenerate.
sim/cris/ChangeLog:
* config.in, configure: Regenerate.
sim/d10v/ChangeLog:
* config.in, configure: Regenerate.
sim/erc32/ChangeLog:
* config.in, configure: Regenerate.
sim/frv/ChangeLog:
* config.in, configure: Regenerate.
sim/h8300/ChangeLog:
* config.in, configure: Regenerate.
sim/iq2000/ChangeLog:
* config.in, configure: Regenerate.
sim/lm32/ChangeLog:
* config.in, configure: Regenerate.
sim/m32c/ChangeLog:
* config.in, configure: Regenerate.
sim/m32r/ChangeLog:
* config.in, configure: Regenerate.
sim/m68hc11/ChangeLog:
* config.in, configure: Regenerate.
sim/mcore/ChangeLog:
* config.in, configure: Regenerate.
sim/microblaze/ChangeLog:
* config.in, configure: Regenerate.
sim/mips/ChangeLog:
* config.in, configure: Regenerate.
sim/mn10300/ChangeLog:
* config.in, configure: Regenerate.
sim/moxie/ChangeLog:
* config.in, configure: Regenerate.
sim/ppc/ChangeLog:
* configure: Regenerate.
sim/rl78/ChangeLog:
* config.in, configure: Regenerate.
sim/rx/ChangeLog:
* config.in, configure: Regenerate.
sim/sh/ChangeLog:
* config.in, configure: Regenerate.
sim/sh64/ChangeLog:
* config.in, configure: Regenerate.
sim/v850/ChangeLog:
* config.in, configure: Regenerate.
sim/testsuite/ChangeLog:
* configure: Regenerate.
|
|
|
|
sim/ChangeLog:
* maintainers (global maintainers): new section. add mike
frysinger.
|
|
* configure.tgt: Add rl78 support.
* configure: Regenerate.
* rl78: New directory.
* MAINTAINERS: Add myself as RL78 maintainer.
[gdb]
* NEWS: Mention RL78 simulator.
|
|
|
|
Now that the common sim testsuite code supports .S and .c files, we
can import the Blackfin testsuite. There are about ~800 tests here,
so I'm only attaching a compressed patch of them. Other than adding
files to sim/testsuite/sim/bfin/, the sim/configure.tgt file was
updated to mark Blackfin as having a testsuite, and sim/configure
regenerated.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|