aboutsummaryrefslogtreecommitdiff
path: root/readline
AgeCommit message (Collapse)AuthorFilesLines
2019-12-23Fix compilation of Readline on mingw.org's MinGWEli Zaretskii2-0/+27
readline/ChangeLog 2019-12-23 Eli Zaretskii <eliz@gnu.org> * posixstat.h (S_IRGRP, S_IWGRP, S_IXGRP, S_IROTH, S_IWOTH) (S_IXOTH, S_IRWXG, S_IRWXO): Define if undefined, even if S_IRWXU is defined, because non-Posix systems may defined only the user bits.
2019-11-15Minor updates to readline configuryTom Tromey5-14/+10
Christian's recent patches to gnulib made me realize that readline should be changed to use AC_CONFIG_MACRO_DIRS (ACLOCAL_AMFLAGS is deprecated) and that it can put the automake options into configure.ac. I also added no-define to the automake options. This doesn't matter much (we don't generate a config.h here), but gnulib does it, and it does make configure slightly smaller. readline/ChangeLog 2019-11-15 Tom Tromey <tromey@adacore.com> * configure, Makefile.in: Rebuild. * configure.ac: Use AC_CONFIG_MACRO_DIRS. Pass options to AM_INIT_AUTOMAKE. * Makefile.am (AUTOMAKE_OPTIONS, ACLOCAL_AMFLAGS): Remove. Change-Id: If421599cc9dd9c4c3c37b9b439ab2c22c01742ed
2019-10-23Move readline to the readline/readline subdirectoryTom Tromey148-10489/+15553
readline turns out to be a bit of a stumbling block for the project to move gdbsupport (and then gdbserver) to the top-level. The issue is that readline headers are intended to be included with names like "readline/readline.h". To support this, gdb effectively adds a -I option pointing to the top-level source directory -- but, importantly, this option is not used when the system readline is used. For gdbsupport, a -I option like this would always be needed, but that in turn would break the system readline case. This was PR build/17077, fixed in commit a8a5dbcab8df0b3a9e04745d4fe8d64740acb323. Previously, we had discussed this on the gdb-patches list in terms of removing readline from the tree https://sourceware.org/ml/gdb-patches/2019-09/msg00317.html However, Eli expressed some concerns, and Joel did as well (off-list). Given those concerns, and the fact that a patch-free local readline is relatively new in gdb (it was locally patched for years), I changed my mind and decided to handle this situation by moving the readline sources down a level. That is, upstream readline is now in readline/readline, and the top-level readline directory just contains the minimal configury needed to build that. This fixes the problem because, when gdb unconditionally adds a -I$(top_srcdir), this will not find readline headers. A separate -I will be needed instead, which is exactly what's needed for --with-system-readline. gdb/ChangeLog 2019-10-23 Tom Tromey <tom@tromey.com> * Makefile.in (READLINE_DIR): Update. gdb/doc/ChangeLog 2019-10-23 Tom Tromey <tom@tromey.com> * Makefile.in (READLINE_DIR): Update. readline/ChangeLog 2019-10-23 Tom Tromey <tom@tromey.com> Move old contents to readline/ subdirectory. * aclocal.m4, configure, configure.ac, .gitignore, Makefile.am, Makefile.in, README: New files. Change-Id: Ice156a2ee09ea68722b48f64d97146d7428ea9e4
2019-09-23gdb/readline: Fix date in last ChangeLog entryAndrew Burgess1-1/+1
Fixes the date in the last ChangeLog entry.
2019-09-23gdb/readline: fix use of an undefined variableAndrew Burgess2-1/+8
This commit in binutils-gdb: commit 830b67068cebe7db0eb0db3fa19244e03859fae0 Date: Fri Jul 12 09:53:02 2019 +0200 [readline] Fix heap-buffer-overflow in update_line Which corresponds to this commit in upstream readline: commit 31547b4ea4a1a904e1b08e2bc4b4ebd5042aedaa Date: Mon Aug 5 10:24:27 2019 -0400 commit readline-20190805 snapshot Introduced a use of an undefined variable, which can be seen using valgrind: $ valgrind --tool=memcheck gdb GNU gdb (GDB) 8.3.50.20190918-git Copyright (C) 2019 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-pc-linux-gnu". Type "show configuration" for configuration details. For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>. Find the GDB manual and other documentation resources online at: <http://www.gnu.org/software/gdb/documentation/>. For help, type "help". Type "apropos word" to search for commands related to "word". ==24924== Conditional jump or move depends on uninitialised value(s) ==24924== at 0x9986C3: rl_redisplay (display.c:710) ==24924== by 0x9839CE: readline_internal_setup (readline.c:447) ==24924== by 0x9A1C2B: _rl_callback_newline (callback.c:100) ==24924== by 0x9A1C85: rl_callback_handler_install (callback.c:111) ==24924== by 0x6195EB: gdb_rl_callback_handler_install(char const*) (event-top.c:319) ==24924== by 0x61975E: display_gdb_prompt(char const*) (event-top.c:409) ==24924== by 0x4FBFE3: cli_interp_base::pre_command_loop() (cli-interp.c:286) ==24924== by 0x6E53DA: interp_pre_command_loop(interp*) (interps.c:321) ==24924== by 0x731F30: captured_command_loop() (main.c:334) ==24924== by 0x733568: captured_main(void*) (main.c:1182) ==24924== by 0x7335CE: gdb_main(captured_main_args*) (main.c:1197) ==24924== by 0x41325D: main (gdb.c:32) ==24924== (gdb) The problem can be traced back to init_line_structures. The very first time this function is ever called its MINSIZE parameter is always 0 and the global LINE_SIZE is 1024. Prior to the above mentioned commits we spot that the line_state variables have not yet been initialised, and allocate them some new buffer, then we enter this loop: for (n = minsize; n < line_size; n++) { visible_line[n] = 0; invisible_line[n] = 1; } which would initialise everything from the incoming minimum up to the potentially extended upper line size. The problem is that the above patches added a new condition that would bump up the minsize like this: if (minsize <= _rl_screenwidth) /* XXX - for gdb */ minsize = _rl_screenwidth + 1; So, the first time this function is called the incoming MINSIZE is 0, the LINE_SIZE global is 1024, and if the _rl_screenwidth is 80, we see that MINSIZE will be pushed up to 80. We still notice that the line state is uninitialised and allocate some buffers, then we enter the initialisation loop: for (n = minsize; n < line_size; n++) { visible_line[n] = 0; invisible_line[n] = 1; } And initialise from 80 to 1023 i the newly allocated buffers, leaving 0 to 79 uninitialised. To confirm this is an issue, if we then look at rl_redisplay we see that a call to init_line_structures is followed first by a call to rl_on_new_line, which does initialise visible_line[0], but not invisible_line[0]. Later in rl_redisplay we have this logic: if (visible_line[0] != invisible_line[0]) rl_display_fixed = 0; The use of invisible_line[0] here will be undefined. Considering how this variable was originally initialised before the above patches, this patch modifies the initialisation loop in init_line_structures, to use the original value of MINSIZE. With this change the valgrind warning goes away. readline/ChangeLog: PR cli/24980 * display.c (init_line_structures): Initialise line_state using original minsize value.
2019-08-13[readline] Fix compilation on MinGWChristian Biesinger2-1/+6
S_ISLNK should not be called outside of an #ifdef. However, this specific call is actually unnecessary, because linkok can only be 0 if S_ISLNK is true, per the code above. I have sent a bug report to bug-readline, though it does not show up in the online archive yet. 2019-08-13 Christian Biesinger <cbiesinger@google.com> * colors.c (_rl_print_color_indicator): Remove unnecessary S_ISLNK check to fix compilation on MinGW.
2019-08-12Import readline 8.0Tom Tromey77-2146/+4046
This imports readline 8.0. readline/ChangeLog.gdb 2019-08-12 Tom Tromey <tom@tromey.com> * Imported readline 8.0.
2019-08-12Remove gdb workaround from readline/xfree.cTom Tromey4-11/+7
There is a gdb-local patch to deal with interrupts during completion. The original thread adding this patch is here: https://sourceware.org/ml/gdb-patches/2011-06/msg00147.html I believe readline now implements the approach suggested by Chet Ramey: https://sourceware.org/ml/gdb-patches/2011-06/msg00493.html So, I believe this patch can be removed. readline/ChangeLog.gdb 2018-10-07 Tom Tromey <tom@tromey.com> * Makefile.in (xfree.o): Don't depend on readline.h. * xfree.c (xfree): Remove gdb workaround. * xmalloc.h (xfree): Remove #define.
2019-08-12Remove gdb workaround from readline/emacs_keymap.cTom Tromey2-6/+4
There is a gdb-local patch in readline/emacs_keymap.c that says: /* Temporary - this is a bug in readline 5.1 that should be fixed in readline 5.2. */ So, I think this can be removed now. I have no way to test this, as the patch was specific to mingw. readline/ChangeLog.gdb 2018-10-07 Tom Tromey <tom@tromey.com> * emacs_keymap.c: Remove gdb workaround.
2019-08-12Remove gdb workaround from readline/complete.cTom Tromey2-5/+4
This removes a gdb-local patch from readline's get_y_or_n. The code references a gdb test that continues to work when I remove this patch. So, I think it is not needed any more. readline/ChangeLog.gdb 2018-10-07 Tom Tromey <tom@tromey.com> * complete.c (get_y_or_n): Remove gdb workaround.
2019-08-12Import readline 7.0 (patch 5)Tom Tromey96-1785/+9062
This imports readline 7.0 (up to patch 5) while preserving all gdb-local changes. This was done by checking out the readline git repository, making a branch based on the gdb baseline revision, applying the gdb changes to that branch, and then merging from readline 7. readline/ChangeLog.gdb 2019-08-12 Tom Tromey <tom@tromey.com> * Imported readline 7.0 patch 5.
2019-07-12[readline] Fix heap-buffer-overflow in update_lineTom de Vries2-0/+12
When: - building trunk gdb with '-fsanitize=address -lasan', - running gdb tests with "export ASAN_OPTIONS=detect_leaks=0", I run into a heap-buffer-overflow failure for gdb.base/utf8-identifiers.exp. In more detail, the libasan error report looks like this: ... ================================================================= ==22340==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x619000054a80 at pc 0x7fcd0306b4c9 bp 0x7fffb1a8d880 sp 0x7fffb1a8d030 READ of size 32766 at 0x619000054a80 thread T0 #0 0x7fcd0306b4c8 (/usr/lib64/libasan.so.4+0xae4c8) #1 0x15f12a1 in update_line /data/gdb_versions/devel/src/readline/display.c:1377 #2 0x15f03cb in rl_redisplay /data/gdb_versions/devel/src/readline/display.c:1204 #3 0x15bf932 in readline_internal_setup /data/gdb_versions/devel/src/readline/readline.c:394 #4 0x15fe723 in _rl_callback_newline /data/gdb_versions/devel/src/readline/callback.c:89 #5 0x15fe7ef in rl_callback_handler_install /data/gdb_versions/devel/src/readline/callback.c:102 #6 0xd7bce6 in gdb_rl_callback_handler_install(char const*) /data/gdb_versions/devel/src/gdb/event-top.c:319 #7 0xd7c0c6 in display_gdb_prompt(char const*) /data/gdb_versions/devel/src/gdb/event-top.c:409 #8 0xd7d6c1 in command_line_handler(std::unique_ptr<char, gdb::xfree_deleter<char> >&&) /data/gdb_versions/devel/src/gdb/event-top.c:776 #9 0xd7b92a in gdb_rl_callback_handler /data/gdb_versions/devel/src/gdb/event-top.c:217 #10 0x15ff479 in rl_callback_read_char /data/gdb_versions/devel/src/readline/callback.c:220 #11 0xd7b4d5 in gdb_rl_callback_read_char_wrapper_noexcept /data/gdb_versions/devel/src/gdb/event-top.c:175 #12 0xd7b6b5 in gdb_rl_callback_read_char_wrapper /data/gdb_versions/devel/src/gdb/event-top.c:192 #13 0xd7c8aa in stdin_event_handler(int, void*) /data/gdb_versions/devel/src/gdb/event-top.c:514 #14 0xd76ca7 in handle_file_event /data/gdb_versions/devel/src/gdb/event-loop.c:731 #15 0xd7751f in gdb_wait_for_event /data/gdb_versions/devel/src/gdb/event-loop.c:857 #16 0xd7547e in gdb_do_one_event() /data/gdb_versions/devel/src/gdb/event-loop.c:321 #17 0xd75526 in start_event_loop() /data/gdb_versions/devel/src/gdb/event-loop.c:370 #18 0x101b04c in captured_command_loop /data/gdb_versions/devel/src/gdb/main.c:331 #19 0x101de73 in captured_main /data/gdb_versions/devel/src/gdb/main.c:1173 #20 0x101df03 in gdb_main(captured_main_args*) /data/gdb_versions/devel/src/gdb/main.c:1188 #21 0x872dba in main /data/gdb_versions/devel/src/gdb/gdb.c:32 #22 0x7fcd00f2ff49 in __libc_start_main (/lib64/libc.so.6+0x20f49) #23 0x872bc9 in _start (/data/gdb_versions/devel/build/gdb/gdb+0x872bc9) 0x619000054a80 is located 0 bytes to the right of 1024-byte region [0x619000054680,0x619000054a80) allocated by thread T0 here: #0 0x7fcd03099510 in malloc (/usr/lib64/libasan.so.4+0xdc510) #1 0xae0078 in xmalloc /data/gdb_versions/devel/src/gdb/common/common-utils.c:44 #2 0x15eaccb in init_line_structures /data/gdb_versions/devel/src/readline/display.c:458 #3 0x15eb4d8 in rl_redisplay /data/gdb_versions/devel/src/readline/display.c:526 #4 0x15bf932 in readline_internal_setup /data/gdb_versions/devel/src/readline/readline.c:394 #5 0x15fe723 in _rl_callback_newline /data/gdb_versions/devel/src/readline/callback.c:89 #6 0x15fe7ef in rl_callback_handler_install /data/gdb_versions/devel/src/readline/callback.c:102 #7 0xd7bce6 in gdb_rl_callback_handler_install(char const*) /data/gdb_versions/devel/src/gdb/event-top.c:319 #8 0xd7c0c6 in display_gdb_prompt(char const*) /data/gdb_versions/devel/src/gdb/event-top.c:409 #9 0xaa041b in cli_interp_base::pre_command_loop() /data/gdb_versions/devel/src/gdb/cli/cli-interp.c:286 #10 0xf5342a in interp_pre_command_loop(interp*) /data/gdb_versions/devel/src/gdb/interps.c:320 #11 0x101b047 in captured_command_loop /data/gdb_versions/devel/src/gdb/main.c:328 #12 0x101de73 in captured_main /data/gdb_versions/devel/src/gdb/main.c:1173 #13 0x101df03 in gdb_main(captured_main_args*) /data/gdb_versions/devel/src/gdb/main.c:1188 #14 0x872dba in main /data/gdb_versions/devel/src/gdb/gdb.c:32 #15 0x7fcd00f2ff49 in __libc_start_main (/lib64/libc.so.6+0x20f49) SUMMARY: AddressSanitizer: heap-buffer-overflow (/usr/lib64/libasan.so.4+0xae4c8) Shadow bytes around the buggy address: 0x0c3280002900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c3280002910: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c3280002920: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c3280002930: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c3280002940: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>0x0c3280002950:[fa]fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c3280002960: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c3280002970: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c3280002980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c3280002990: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c32800029a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb ==22340==ABORTING ... I've written an assert in rl_redisplay that formulates the error condition: ... @@ -1387,6 +1389,10 @@ rl_redisplay (void) cpos_adjusted = 0; + assert (last_lmargin + (_rl_screenwidth + visible_wrap_offset) + <= line_size); + assert (lmargin + (_rl_screenwidth + (lmargin ? 0 : wrap_offset)) + <= line_size); update_line (&visible_line[last_lmargin], &invisible_line[lmargin], 0, _rl_screenwidth + visible_wrap_offset, _rl_screenwidth + (lmargin ? 0 : wrap_offset), 0); ... which triggers without needing the address sanitizer (or even an executable), like this: ... $ TERM=dumb gdb -q -ex "set width 0" gdb: src/display.c:1393: rl_redisplay: Assertion `last_lmargin + (_rl_screenwidth + visible_wrap_offset) <= line_size' failed. Aborted (core dumped) ... The basic problem is this: visible_line and invisible_line have length line_size, but the update_line call assumes that line_size is at least _rl_screenwidth + 1. Executing "set width 0" sets _rl_screenwidth to 32766 but doesn't affect line_size, which is initialized to 1024. Fix this by ensuring in init_line_structures and rl_redisplay that line_size is at least _rl_screenwidth + 1. Tested on x86_64-linux. Reviewed by readline maintainer ( https://sourceware.org/ml/gdb-patches/2019-05/msg00566.html ). readline/ChangeLog.gdb: 2019-07-12 Tom de Vries <tdevries@suse.de> Chet Ramey <chet.ramey@case.edu> PR cli/24514 * readline/display.c (init_line_structures, rl_redisplay): Ensure line_size is at least _rl_screenwidth + 1.
2019-05-23config.guess,config.sub: synchronize with config project master sourcesJose E. Marchesi2-1732/+1994
This is to bring in the newly introduced support for bpf-*-* targets. ChangeLog: 2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com> * config.guess: Synchronize with config project master sources. * config.sub: Likewise. * readline/support/config.guess: Likewise. * readline/support/config.sub: Likewise.
2019-01-31Readline: Cleanup some warningsAlan Hayward4-4/+21
Cleanup the readline warnings that gdb buildbot complains about. To prevent wcwidth missing declaration warnings, add the SOURCE / EXTENSION macros to config.in that have already checked for in configure. Ensure pid is a long before printing as one. Also fix GNU style. Check the return value of write the same way as history_do_write (). These changes are consistent with upstream readline. readline/ChangeLog.gdb: * config.h.in: Add SOURCE/EXTENSION macros. * histfile.c (history_truncate_file): Check return of write. * util.c (_rl_tropen): Ensure pid is long.
2018-06-19Bump to autoconf 2.69 and automake 1.15.1Simon Marchi2-3110/+2150
When trying to run the update-gnulib.sh script in gdb, I get this: Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1. Aborting. Apparently, it's an issue with a regex in automake that triggers a warning starting with Perl 5.22. It has been fixed in automake 1.15.1. So I think it's a good excuse to bump the versions of autoconf and automake used in the gnulib import. And to avoid requiring multiple builds of autoconf/automake, it was suggested that we bump the required version of those tools for all binutils-gdb. For autoconf, the 2.69 version is universally available, so it's an easy choice. For automake, different distros and distro versions have different automake versions. But 1.15.1 seems to be the most readily available as a package. In any case, it's easy to build it from source. I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ, because I don't think they are useful in our case. They only specify a lower bound for the acceptable version of automake/autoconf. That's useful if you let the user choose the version of the tool they want to use, but want to set a minimum version (because you use a feature that was introduced in that version). In our case, we force people to use a specific version anyway. For the autoconf version, we have the check in config/override.m4 that enforces the version we want. It will be one less thing to update next time we change autotools version. I hit a few categories of problems that required some changes. They are described below along with the chosen solutions. Problem 1: configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation Solution 1: Adjust the code based on the example at that URL. Problem 2 (in zlib/): Makefile.am: error: required file './INSTALL' not found Makefile.am: 'automake --add-missing' can install 'INSTALL' Makefile.am: error: required file './NEWS' not found Makefile.am: error: required file './AUTHORS' not found Makefile.am: error: required file './COPYING' not found Makefile.am: 'automake --add-missing' can install 'COPYING' Solution 2: Add the foreign option to AUTOMAKE_OPTIONS. Problem 3: doc/Makefile.am:20: error: support for Cygnus-style trees has been removed Solution 3: Remove the cygnus options. Problem 4: Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') Solution 4: Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is already defined earlier). Problem 5: doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 5: Rename .texinfo files to .texi. Problem 6: doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 6: Remove the hack at the bottom of doc/Makefile.am and use the info-in-builddir automake option. Problem 7: doc/Makefile.am:35: error: required file '../texinfo.tex' not found doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex' Solution 7: Use the no-texinfo.tex automake option. We also have one in texinfo/texinfo.tex, not sure if we should point to that, or move it (or a newer version of it added with automake --add-missing) to top-level. Problem 8: Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory, Makefile.am:131: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. Solution 8: Use subdir-objects, that means adjusting references to some .o that will now be in config/. Problem 9: configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... ../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from... ../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from... ../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from... ../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from... configure.ac:375: the top level Solution 9: Use AC_LANG_SOURCE, or use proper quoting. Problem 10 (in intl/): configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS /usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from... /usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from... /usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from... /usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from... /usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from... /usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from... /usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from... configure.ac:7: the top level Solution 10: Add AC_USE_SYSTEM_EXTENSIONS in configure.ac. ChangeLog: * libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * README-maintainer-mode: Update version requirements. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. bfd/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. (INCLUDES): Rename to ... (AM_CPPFLAGS): ... this. * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add info-in-builddir no-texinfo.tex. (info_TEXINFOS): Rename bfd.texinfo to bfd.texi. * doc/bfd.texinfo: Rename to ... * doc/bfd.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. binutils/ChangeLog: * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add info-in-builddir no-texinfo.tex. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. config/ChangeLog: * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. etc/ChangeLog: * configure.in: Remove AC_PREREQ. * configure: Re-generate. gas/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects. (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix. * configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles, extra_objects): Add config/ prefix. * doc/as.texinfo: Rename to... * doc/as.texi: ... this. * doc/Makefile.am: Rename as.texinfo to as.texi throughout. Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gdb/ChangeLog: * common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION, PACKAGE_STRING, PACKAGE_TARNAME): Undefine. * configure.ac: Remove AC_PREREQ, add missing quoting. * gnulib/configure.ac: Modernize usage of AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ. * gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69. (AUTOMAKE_VERSION): Bump to 1.15.1. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. * gnulib/aclocal.m4: Re-generate. * gnulib/config.in: Re-generate. * gnulib/configure: Re-generate. * gnulib/import/Makefile.in: Re-generate. gdb/gdbserver/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. gdb/testsuite/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. gold/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting and usage of AC_LANG_SOURCE. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * testsuite/Makefile.in: Re-generate. gprof/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * gconfig.in: Re-generate. intl/ChangeLog: * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. ld/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. (AUTOMAKE_OPTIONS): Add info-in-builddir. * README: Rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. * gen-doc.texi: Likewise. * h8-doc.texi: Likewise. * ld.texinfo: Rename to ... * ld.texi: ... this. * ldint.texinfo: Rename to ... * ldint.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. libdecnumber/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libiberty/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. opcodes/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. * configure.ac: Remove AC_PREREQ. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. readline/ChangeLog.gdb: * configure: Re-generate. * examples/rlfe/configure: Re-generate. sim/ChangeLog: * All configure.ac: Remove AC_PREREQ. * All configure: Re-generate. zlib/ChangeLog.bin-gdb: * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate.
2017-05-19Avoid MinGW compilation warning in readline/input.cEli Zaretskii2-0/+6
This change was already accepted upstream in Readline. readline/ChangeLog.gdb: 2017-05-19 Eli Zaretskii <eliz@gnu.org> * input.c [_WIN32]: Include <conio.h> to avoid compiler warning on MinGW.
2016-09-17Improve MinGW support in ReadlineEli Zaretskii14-11/+125
These changes were already accepted upstream in Readline, but GDB did not yet import a newer Readline version. readline/Changelog.gdb: * util.c: Include rlshell.h. (_rl_tropen) [_WIN32 && !__CYGWIN__]: Open the trace file in the user's temporary directory. * tcap.h [HAVE_NCURSES_TERMCAP_H]: Include ncurses/termcap.h. * input.c (w32_isatty) [_WIN32 && !__CYGWIN__]: New function, to replace isatty that is not reliable enough on MS-Windows. (isatty) [_WIN32 && !__CYGWIN__]: Redirect to w32_isatty. (rl_getc): Call _getch, not getch, which could be an ncurses function when linked with ncurses, in which case getch will return EOF for any keystroke, because there's no curses window. * tilde.c (tilde_expand_word) [_WIN32]: * histfile.c (history_filename) [_WIN32]: Windows-specific environment variable to replace HOME if that is undefined. * funmap.c (default_funmap): Compile rl_paste_from_clipboard on all Windows platforms, not just Cygwin. * readline.h (rl_paste_from_clipboard): Include declaration for all Windows platforms. * display.c (insert_some_chars, delete_chars): Don't use the MinGW-specific code if linked with ncurses. * configure.in: * config.h.in: Support ncurses/termcap.h. The configure script was updated accordingly. * complete.c [_WIN32 && !__CYGWIN__]: Initialize _rl_completion_case_fold to 1. (printable_part, rl_filename_completion_function) [_WIN32 && !__CYGWIN__]: Handle the drive letter.
2015-07-25Revert "Sync readline/ to version 7.0 alpha"Patrick Palka94-10012/+4493
This reverts commit b558ff043d41ba8d17a82f5f9ae5f9dade66160e. This reverts commit 4a11f2065906976675808364ddbd1c0f77eea41f. The initial import commit failed to retain local changes made to readline's configure.in (and the commit message erroneously stated that there were no local changes that needed to be reapplied). Also the import caused a couple of build errors and a scattering of testsuite regressions throughout many arches. It's probably better to start over with this import, hopefully more carefully next time.
2015-07-25Don't build readline's shared libs by defaultPatrick Palka3-2/+7
Since the sync to version 7.0-alpho, readline now by default builds (unused) shared libraries alongside static libraries, whereas before it only built static libraries. A couple of GDB buildbots were not happy with this change: http://gdb-build.sergiodj.net/builders/AIX-POWER7-plain/builds/240 http://gdb-build.sergiodj.net/builders/Fedora-i686/builds/1518 To get these buildbots building again, this patch alters readline's configure.ac file to not build shared libraries by default, as was the case with readline 6.2. A more permanent fix may be to alter the top-level Makefile.def to pass --disable-shared to readline, or to investigate why these building these shared libraries are giving the buildbots trouble. (I think the proximate reason why the i686 buildbot fails is because it passes CFLAGS=-m32 instead of CC="gcc -m32" to the top-level configure script, and readline's linker commands don't inherit CFLAGS. Not sure about the AIX failure.) readline/ChangeLog.gdb: * configure.ac: Default opt_shared_libs to no. * configure: Regenerate.
2015-07-25Sync readline/ to version 7.0 alphaPatrick Palka94-4495/+10009
This patch syncs our upstream copy of readline from version 6.2 to the latest version, 7.0 alpha (released July 10 2015). I essentially copied what was done the last time readline was synced, when Jan updated to readline 6.2 in 2011: http://sourceware.org/ml/gdb-patches/2011-05/msg00003.html Procedure: 1. I extracted the readline-7.0-alpha tarball on top of readline/. 2. I deleted all the new files under doc/ that were deliberately omitted before. 3. I regenerated readline/configure and readline/examples/rlfe/configure using autoconf 2.64. No other configure files need regenerating. 4. I updated the function gdb_printable_part in completer.c with a trivial change made to the readline function it is based off of, printable_part in readline/complete.c. There is more work to be done in completer.c to sync it with readline/complete.c, but it is non-trivial and should probably be done separately anyway. Local patches that had to be reapplied: None. readline 7.0 alpha contains all of our local readline patches. New files in readline/: colors.{c,h} examples/{hist_erasedups,hist_purgecmd,rl-callbacktest,rlbasic}.c parse-colors.{c,h} readline.pc.in configure.ac Deleted files in readline/: configure.in Regressions: After the sync there is one testsuite regression, the test "signal SIGINT" in gdb.gdb/selftest.exp which now FAILs. Previously, the readline 6.2 SIGINT handler would temporarily reinstall the underlying application's SIGINT handler and immediately re-raise SIGINT so that the orginal handler gets invoked. But now (since readline 6.3) its SIGINT handler does not re-raise SIGINT or directly invoke the original handler; it now sets a flag marking that SIGINT was raised, and waits until readline explicitly has control to call the application's SIGINT handler. Anyway, because SIGINT is no longer re-raised from within readline's SIGINT handler, doing "signal SIGINT" with a stopped inferior gdb process will no longer resume and then immediately stop the process (since there is no 2nd SIGINT to immediately catch). Instead, the inferior gdb process will now just print "Quit" and continue to run. So with this commit, this particular test case is adjusted to reflect this change in behavior (we now have to send a 2nd SIGINT manually to stop it). Aside from this one testsuite regression, I personally noticed no regression in user-visible behavior. Though I only tested on x86_64 and on i686 Debian Stretch. Getting this kind of change in at the start of the GDB 7.11 development cycle will allow us to get a lot of passive testing from developers and from bleeding-edge users. readline/ChangeLog.gdb: Import readline 7.0 alpha * configure: Regenerate. * examples/rlfe/configure: Regenerate. gdb/ChangeLog: * completer.c (gdb_printable_part): Sync with readline function it is based off of. gdb/testsuite/ChangeLog: * gdb.gdb/selftest.exp (test_with_self): Update test to now expect the GDB inferior to no longer immediately stop after being resumed with "signal SIGINT".
2014-12-30Fix executable indicator in file name completion on Windows.Eli Zaretskii2-0/+19
* complete.c (stat_char) [_WIN32]: Don't use 'access' and X_OK on Windows, they don't work. Instead, look at the file-name extension to determine whether the file is executable.
2014-09-22readline/search.c: Remove useless parameter '0' for rl_message()Chen Gang2-1/+7
The related warning under Darwin x86_64: gcc -c -DHAVE_CONFIG_H -I. -I../../binutils-gdb/readline -DRL_LIBRARY_VERSION='"6.2"' -g -O2 ../../binutils-gdb/readline/search.c ../../binutils-gdb/readline/search.c:213:24: warning: data argument not used by format string [-Wformat-extra-args] rl_message ("%s", p, 0); ~~~~ ^ 1 warning generated. readline/ChangeLog.gdb: * search.c (_rl_nsearch_init): Remove useless parameter '0' for rl_message(). Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
2013-09-24 * readline.c (bind_arrow_keys_internal):Pierre Muller2-0/+10
Handle VK_HOME, VK_END, VK_DELETE and VK_INSERT for mingw hosts.
2013-09-24Fix last entry in ChangeLog.gdb (unnecessary dir name).Joel Brobecker1-1/+1
2013-09-23[MinGW] Fix a compilation error in readline/util.c:_rl_strnicmpJoel Brobecker2-1/+6
readline/ChangeLog.gdb: * readline/util.c (_rl_strnicmp): Add missing semicolon.
2013-05-22readline/Yao Qi3-2/+10
* configure.in: Invoke AC_CANONICAL_BUILD. Change $host_os to $build_os. * configure: Regenerated.
2012-10-18Remove some extraneous changes in readline/terminal.cJoel Brobecker2-19/+7
This patch removes some unnecessary differences between the official version of readline, and GDB's copy of it. readline/ChangeLog.gdb: * terminal.c: Remove duplicate includes of windows.h and wincon.h. (_rl_get_screen_size): Remove redundant code for MinGW getting the console size from the Windows API.
2012-02-24 * signals.c (_rl_block_sigwinch, _rl_release_sigwinch): AddPierre Muller2-0/+7
conditional SIGWINCH around functions.
2011-10-122011-05-11 Sterling Augustine <saugustine@google.com>Sterling Augustine2-2/+5
* complete.c (rl_completion_matches): Undo inadvertant checkin.
2011-10-112011-10-11 Sterling Augustine <saugustine@google.com>Sterling Augustine1-1/+2
* dwarf2read.c: Undo inadvertent changes in previous commit.
2011-06-29readline/Jan Kratochvil4-1/+19
Avoid free from a signal handler. * Makefile.in (xfree.o): Add readline.h. * xfree.c: Include stdio.h and readline.h. (xfree): Return on RL_STATE_SIGHANDLER. * xmalloc.h (xfree): New definition.
2011-05-11Imported readline 6.2, and upstream patch 001.Jan Kratochvil122-4962/+10949
[patch 0/3] readline-6.2 rebase http://sourceware.org/ml/gdb-patches/2011-05/msg00003.html [patch 1/3] readline-6.2: Merge of already posted patches http://sourceware.org/ml/gdb-patches/2011-05/msg00004.html = [Bug-readline] [RFC/readline] bind.c, rl_function_dumper, Free allocated http://lists.gnu.org/archive/html/bug-readline/2011-03/msg00000.html [Bug-readline] [patch] Fix underquotation in readline/examples/rlfe/conf http://lists.gnu.org/archive/html/bug-readline/2011-04/msg00001.html [Bug-readline] [patch] Makefile.in htm<->html http://lists.gnu.org/archive/html/bug-readline/2011-04/msg00002.html Re: [Bug-readline] [patch] Makefile.in dependency: callback.o: xmalloc.h http://lists.gnu.org/archive/html/bug-readline/2011-04/msg00004.html [Bug-readline] [patch] Remove . from the VPATH directive http://lists.gnu.org/archive/html/bug-readline/2011-04/msg00005.html Eli Zaretskii's __MSDOS__ / __GO32__ / __MINGW32__ / __DJGPP__ stuff: http://sourceware.org/ml/gdb/2011-04/msg00002.html Jan Kratochvil's patch for FSF GDB tree local-specific changes: http://sourceware.org/ml/gdb/2011-04/msg00006.html Preservation of existing ChangeLog.gdb files, their updates. [patch 2/3] readline-6.2: Workaround "ask" regression http://sourceware.org/ml/gdb-patches/2011-05/msg00005.html [patch 3/3] readline-6.2: Revert 5.x compat., apply 6.x compat. http://sourceware.org/ml/gdb-patches/2011-05/msg00006.html [patch 4/3] readline-6.2: Substitute inc-hist.texinfo http://sourceware.org/ml/gdb-patches/2011-05/msg00010.html readline/ Workaround gdb.base/completion.exp regression on readline-6.2. * complete.c (get_y_or_n): Disable the return on RL_STATE_CALLBACK. Imported readline 6.2, and upstream patch 001. * configure: Regenerate. readline/doc/ * hsuser.texi (Using History Interactively): Disable !BashFeatures @defcodeindex. Make the `Programming with GNU History' reference external. * inc-hist.texinfo: Remove. Imported readline 6.2, and upstream patch 001. readline/examples/ Imported readline 6.2, and upstream patch 001. readline/examples/rlfe/ Imported readline 6.2, and upstream patch 001. gdb/ * config.in: Regenerate. * configure: Regenerate. * configure.ac <--with-system-readline> (for readline_echoing_p): Remove the test. * tui/tui-io.c (tui_old_readline_echoing_p): Rename to ... (tui_old_rl_echoing_p): ... here. (tui_setup_io): Rename extern declaration readline_echoing_p to _rl_echoing_p. Adjust assignments for the both renames. gdb/doc/ * Makefile.in (GDB_DOC_SOURCE_INCLUDES): Rename inc-hist.texinfo to hsuser.texi. * gdb.texinfo <!SYSTEM_READLINE>: Rename inc-hist.texinfo inclusion and comment to hsuser.texi. Change rluser.texi name in the comment.
2011-03-042011-03-04 Michael Snyder <msnyder@vmware.com>Michael Snyder2-0/+5
* bind.c (rl_function_dumper): Free allocated memory.
2009-08-22Regenerate tree using Autoconf 2.64 and Automake 1.11.Ralf Wildenhues4-9166/+6645
config/: * override.m4 (_GCC_AUTOCONF_VERSION): Bump to 2.64. /: * configure: Regenerate. etc/: * configure: Regenerate. sim/common/: * config.in: Regenerate. * configure: Likewise. sim/iq2000/: * config.in: Regenerate. * configure: Likewise. sim/d10v/: * config.in: Regenerate. * configure: Likewise. sim/igen/: * config.in: Regenerate. * configure: Likewise. sim/m32r/: * config.in: Regenerate. * configure: Likewise. sim/frv/: * config.in: Regenerate. * configure: Likewise. sim/: * avr/config.in: Regenerate. * avr/configure: Likewise. * configure: Likewise. * cris/config.in: Likewise. * cris/configure: Likewise. sim/h8300/: * config.in: Regenerate. * configure: Likewise. sim/mn10300/: * config.in: Regenerate. * configure: Likewise. sim/ppc/: * config.in: Regenerate. * configure: Likewise. sim/erc32/: * config.in: Regenerate. * configure: Likewise. sim/arm/: * config.in: Regenerate. * configure: Likewise. sim/m68hc11/: * config.in: Regenerate. * configure: Likewise. sim/lm32/: * config.in: Regenerate. * configure: Likewise. sim/sh64/: * config.in: Regenerate. * configure: Likewise. sim/v850/: * config.in: Regenerate. * configure: Likewise. sim/cr16/: * config.in: Regenerate. * configure: Likewise. sim/moxie/: * config.in: Regenerate. * configure: Likewise. sim/m32c/: * config.in: Regenerate. * configure: Likewise. sim/mips/: * config.in: Regenerate. * configure: Likewise. sim/mcore/: * config.in: Regenerate. * configure: Likewise. sim/testsuite/d10v-elf/: * configure: Regenerate. sim/testsuite/: * configure: Regenerate. sim/testsuite/frv-elf/: * configure: Regenerate. sim/testsuite/m32r-elf/: * configure: Regenerate. sim/testsuite/mips64el-elf/: * configure: Regenerate. sim/sh/: * config.in: Regenerate. * configure: Likewise. gold/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. * testsuite/Makefile.in: Likewise. gprof/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * configure: Likewise. * gconfig.in: Likewise. opcodes/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. gas/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. * doc/Makefile.in: Likewise. ld/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. gdb/: * aclocal.m4: Regenerate. * config.in: Likewise. * configure: Likewise. * gnulib/Makefile.in: Likewise. gdb/doc/: * configure: Regenerate. gdb/gdbserver/: * aclocal.m4: Regenerate. * config.in: Likewise. * configure: Likewise. gdb/testsuite/: * configure: Regenerate. * gdb.hp/configure: Likewise. * gdb.hp/gdb.aCC/configure: Likewise. * gdb.hp/gdb.base-hp/configure: Likewise. * gdb.hp/gdb.compat/configure: Likewise. * gdb.hp/gdb.defects/configure: Likewise. * gdb.hp/gdb.objdbg/configure: Likewise. * gdb.stabs/configure: Likewise. binutils/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. * doc/Makefile.in: Likewise. bfd/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. bfd/doc/: * Makefile.in: Regenerate. readline/: * configure: Regenerate. readline/examples/rlfe/: * configure: Regenerate.
2009-08-22Fixup readline and sim including of override.m4Ralf Wildenhues6-46/+128
readline/examples/rlfe/: * configure.in: m4_include toplevel config/override.m4. * configure: Regenerate. readline/ChangeLog.gdb: * configure.in: m4_include toplevel config/override.m4. * configure: Regenerate. sim/: * configure.ac: m4_include toplevel config/override.m4. * configure: Regenerate. * avr/configure: Regenerate. * cris/configure: Regenerate. sim/common/: * aclocal.m4: m4_include toplevel config/override.m4. * configure: Regenerate. sim/iq2000/: * configure: Regenerate. sim/d10v/: * configure: Regenerate. sim/igen/: * configure: Regenerate. sim/m32r/: * configure: Regenerate. sim/frv/: * configure: Regenerate. sim/h8300/: * configure: Regenerate. sim/mn10300/: * configure: Regenerate. sim/ppc/: * configure: Regenerate. sim/erc32/: * configure: Regenerate. sim/arm/: * configure: Regenerate. sim/m68hc11/: * configure: Regenerate. sim/lm32/: * configure: Regenerate. sim/sh64/: * configure: Regenerate. sim/v850/: * configure: Regenerate. sim/cr16/: * configure: Regenerate. sim/moxie/: * configure: Regenerate. sim/m32c/: * configure: Regenerate. sim/mips/: * configure: Regenerate. sim/mcore/: * configure: Regenerate. sim/sh/: * configure: Regenerate.
2009-07-30sim/Ralf Wildenhues4-0/+13
* Makefile.in (datarootdir): New variable. sim/common/ * Makefile.in (datarootdir): New variable. sim/igen/ * Makefile.in (datarootdir): New variable. sim/ppc/ * Makefile.in (datarootdir): New variable. readline/ * Makefile.in (datarootdir): New variable. * doc/Makefile.in (datarootdir): New variable. * shlib/Makefile.in (datarootdir): New variable. gdb/gdbserver/ * Makefile.in (datarootdir): New variable.
2009-07-30config/Ralf Wildenhues2-1/+5
* extensions.m4 (AC_USE_SYSTEM_EXTENSIONS): Do not expand for Autoconf 2.62 or newer. * tls.m4 (GCC_CHECK_TLS): Fix m4 quotation. * no-executables.m4 (_AC_COMPILER_EXEEXT): Fix m4 quotation. * override.m4 (m4_copy_force, m4_rename_force): Provide macros if not defined. (AC_PREREQ): Use m4_copy_force. readline/examples/rlfe/ * configure.in: Correctly quote AC_PROGRAM_SOURCE definition.
2009-04-17gdb:Joseph Myers2-1/+8
2009-04-17 Carlos O'Donell <carlos@codesourcery.com> * configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir. * configure: Regenerate. * Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from configure substitutions. (FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir. gdb/doc: 2009-04-17 Carlos O'Donell <carlos@codesourcery.com> * Makefile.in: Set pdfdir and htmldir from configure substitutions. * configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir. * configure: Regenerate. readline: 2009-04-17 Carlos O'Donell <carlos@codesourcery.com> * Makefile.in: Add html target. Add dummy install-html and install-pdf targets. sim: 2009-04-17 Carlos O'Donell <carlos@codesourcery.com> * Makefile.in: Add dummy install-pdf, html, and install-html targets.
2008-08-10 Build fixes for DJGPP.Pedro Alves3-0/+16
* signals.c (rl_set_sighandler): Guard access to SIGWINCH. * wcwidth.c [__GO32__]: Include wctype.h before wchar.h.
2008-03-24 PR gdb/544Jan Kratochvil4-14/+32
* rltty.c (block_sigint, release_sigint): Rename to... (_rl_block_sigint, _rl_release_sigint): ...these and make them global. * rltty.h (_rl_block_sigint, _rl_release_sigint): New prototypes. * display.c (rl_redisplay): Wrap the function by the calls to _RL_BLOCK_SIGINT and _RL_RELEASE_SIGINT.
2007-09-01 PR gdb/2138Daniel Jacobowitz3-62/+125
From readline 5.2: * configure.in (CROSS_COMPILE): Initialize to empty. * configure: Regenerated.
2007-03-27Add "make pdf" and "make install-pdf", from Brooks MosesDaniel Jacobowitz2-1/+5
<brooks.moses@codesourcery.com>.
2006-11-132006-11-13 Denis Pilat <denis.pilat@st.com>Frederic Riss2-2/+7
* terminal.c (_rl_get_screen_size): use wr and wc variable to store window size.
2006-10-21 * callback.c: Include "xmalloc.h".Ulrich Weigand3-0/+7
* Makefile.in: Add dependency.
2006-05-05Readline 5.1 import for HEAD.Daniel Jacobowitz84-8530/+8824
2006-04-20touched all sources to ease import of readline-5.1Elena Zannoni3-2/+15
2006-04-20This commit was generated by cvs2svn to track changes on a CVS vendorElena Zannoni28-0/+15554
branch.
2006-04-20import of readlilne 5.1FSFElena Zannoni112-17682/+56807
2006-03-21 * histfile.c (read_history_range): Remove '\r' character fromDaniel Jacobowitz2-1/+9
history lines.
2006-02-23 * readline/terminal.c (_rl_get_screen_size): Get console size fromDaniel Jacobowitz2-0/+24
the Windows API when compiling with MinGW.
generated by cgit v1.1 at 2024-11-19 22:58:38 +0000