aboutsummaryrefslogtreecommitdiff
path: root/opcodes
AgeCommit message (Collapse)AuthorFilesLines
2019-05-09[binutils][aarch64] New sve_size_tsz_bhs iclass.Matthew Malcomson3-0/+24
Add sve_size_tsz_bhs iclass needed for sqxtnb and similar instructions. This iclass encodes one of three variants by the most significant bit set in a 3-bit value where only one bit may be set. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_insn_class): Add sve_size_tsz_bhs iclass. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle sve_size_tsz_bhs iclass encode. * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle sve_size_tsz_bhs iclass decode.
2019-05-09[binutils][aarch64] New SVE_Zm4_11_INDEX operand.Matthew Malcomson7-14/+36
This includes defining a new single bit field SVE_i2h at position 20. SVE_Zm4_11_INDEX handles indexed Zn registers where the index is encoded in bits 20:11 and the register is chosed from range z0-z15 in bits 19-16. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (parse_operands): Handle new SVE_Zm4_11_INDEX operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New SVE_Zm4_11_INDEX operand. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking for SVE_Zm4_11_INDEX. (aarch64_print_operand): Add printing for SVE_Zm4_11_INDEX. (fields): Handle SVE_i2h field. * aarch64-opc.h (enum aarch64_field_kind): New SVE_i2h field. * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_Zm4_11_INDEX operand.
2019-05-09[binutils][aarch64] New sve_shift_tsz_bhsd iclass.Matthew Malcomson3-0/+19
This new iclass encodes the variant by which is the most significant bit used of bits 23-22:20-19, where those bits are usually part of a given constant operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_insn_class): Add sve_shift_tsz_bhsd iclass. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle sve_shift_tsz_bhsd iclass encode. * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle sve_shift_tsz_bhsd iclass decode.
2019-05-09[binutils][aarch64] New SVE_SHRIMM_UNPRED_22 operand.Matthew Malcomson8-32/+73
Include a new iclass to extract the variant from the most significant 3 bits of this operand. Instructions such as rshrnb include a constant shift amount as an operand, where the most significant three bits of this operand determine what size elements the instruction is operating on. The new SVE_SHRIMM_UNPRED_22 operand denotes this constant encoded in bits 22:20-19:18-16 while the new sve_shift_tsz_hsd iclass denotes that the SVE qualifier is encoded in bits 22:20-19. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (parse_operands): Handle new SVE_SHRIMM_UNPRED_22 operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New SVE_SHRIMM_UNPRED_22 operand. (enum aarch64_insn_class): Add sve_shift_tsz_hsd iclass. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-asm.c (aarch64_ins_sve_shrimm): (aarch64_encode_variant_using_iclass): Handle sve_shift_tsz_hsd iclass encode. * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle sve_shift_tsz_hsd iclass decode. * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking for SVE_SHRIMM_UNPRED_22. (aarch64_print_operand): Add printing for SVE_SHRIMM_UNPRED_22. * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_SHRIMM_UNPRED_22 operand.
2019-05-09[binutils][aarch64] New sve_size_013 iclass.Matthew Malcomson3-0/+25
Add sve_size_013 instruction class This new iclass handles instructions such as pmullb whose size specifier can only be encoded as 0, 1, or 3. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_insn_class): Add sve_size_013 iclass. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle sve_size_013 iclass encode. * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle sve_size_013 iclass decode.
2019-05-09[binutils][aarch64] New sve_size_bh iclass.Matthew Malcomson3-0/+9
Add new iclass sve_size_bh to handle instructions that have two variants encoded with the SVE_sz field. This iclass behaves the same as the sve_size_sd iclass, but it has a nicer name for those instructions that choose between variants using the "B" and "H" size qualifiers. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_insn_class): Add sve_size_bh iclass. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle sve_size_bh iclass encode. * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle sve_size_bh iclass decode.
2019-05-09[binutils][aarch64] New sve_size_sd2 iclass.Matthew Malcomson5-0/+19
Define new sve_size_sd2 iclass to distinguish between the two variants of ldnt1sb and ldnt1sh. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_insn_class): Add sve_size_sd2 iclass. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle sve_size_sd2 iclass encode. * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle sve_size_sd2 iclass decode. * aarch64-opc.c (fields): Handle SVE_sz2 field. * aarch64-opc.h (enum aarch64_field_kind): New SVE_sz2 field.
2019-05-09[binutils][aarch64] New SVE_ADDR_ZX operand.Matthew Malcomson6-66/+100
Add AARCH64_OPND_SVE_ADDR_ZX operand that allows a vector of addresses in a Zn register, offset by an Xm register. This is used with scatter/gather SVE2 instructions. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (REG_ZR): Macro specifying zero register. (parse_address_main): Account for new addressing mode [Zn.S, Xm]. (parse_operands): Handle new SVE_ADDR_ZX operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New SVE_ADDR_ZX operand. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking for SVE_ADDR_ZX. (aarch64_print_operand): Add printing for SVE_ADDR_ZX. * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_ADDR_ZX operand.
2019-05-09[binutils][aarch64] New SVE_Zm3_11_INDEX operand.Matthew Malcomson7-14/+39
Introduce new operand SVE_Zm3_11_INDEX that indicates a register between z0-z7 stored in bits 18-16 and an index stored in bits 20-19:11. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (parse_operands): Handle new SVE_Zm3_11_INDEX operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New SVE_Zm3_11_INDEX operand. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking for SVE_Zm3_11_INDEX. (aarch64_print_operand): Add printing for SVE_Zm3_11_INDEX. (fields): Handle SVE_i3l and SVE_i3h2 fields. * aarch64-opc.h (enum aarch64_field_kind): New SVE_i3l and SVE_i3h2 fields. * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_Zm3_11_INDEX operand.
2019-05-09[binutils][aarch64] New iclass sve_size_hsd2.Matthew Malcomson5-0/+23
Add "sve_size_hsd2" iclass decode that uses the new FLD_SVE_size field value to determine the variant of an instruction. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_insn_class): Add sve_size_hsd2 iclass. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle sve_size_hsd2 iclass encode. * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle sve_size_hsd2 iclass decode. * aarch64-opc.c (fields): Handle SVE_size field. * aarch64-opc.h (enum aarch64_field_kind): New SVE_size field.
2019-05-09[binutils][aarch64] Introduce SVE_IMM_ROT3 operand.Matthew Malcomson7-38/+59
New operand AARCH64_OPND_SVE_IMM_ROT3 handles a single bit rotate operand encoded at bit position 10. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (parse_operands): Handle new SVE_IMM_ROT3 operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New SVE_IMM_ROT3 operand. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking for SVE_IMM_ROT3. (aarch64_print_operand): Add printing for SVE_IMM_ROT3. (fields): Handle SVE_rot3 field. * aarch64-opc.h (enum aarch64_field_kind): New SVE_rot3 field. * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_IMM_ROT3 operand.
2019-05-09[binutils][aarch64] Allow movprfx for SVE2 instructions.Matthew Malcomson2-1/+8
SVE2 introduces a number of new instructions that work with the movprfx instruction. This commit ensures that SVE2 instructions are accounted for. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-opc.c (verify_constraints): Check for movprfx for sve2 instructions.
2019-05-09[binutils][aarch64] SVE2 feature extension flags.Matthew Malcomson2-0/+47
Include all feature flag macros. The "sve2" extension that enables the core sve2 instructions. This also enables the sve extension, since sve is a requirement of sve2. Extra optional sve2 features are the bitperm, sm4, aes, and sha3 extensions. These are all given extra feature flags, "bitperm", "sve2-sm4", "sve2-aes", and "sve2-sha3" respectively. The sm4, aes, and sha3 extensions are explicitly marked as sve2 extensions to distinguish them from the corresponding NEON extensions. Rather than continue extending the current feature flag numbers, I used some bits that have been skipped. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c: Add command line architecture feature flags "sve2", "sve2-sm4", "sve2-aes", "sve2-sha3", "bitperm". * doc/c-aarch64.texi: Document new architecture feature flags. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_SVE2 AARCH64_FEATURE_SVE2_AES, AARCH64_FEATURE_SVE2_BITPERM, AARCH64_FEATURE_SVE2_SM4, AARCH64_FEATURE_SVE2_SHA3): New feature macros. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-tbl.h (aarch64_feature_sve2, aarch64_feature_sve2aes, aarch64_feature_sve2sha3, aarch64_feature_sve2sm4, aarch64_feature_sve2bitperm): New feature sets. (SVE2, SVE2_AES, SVE2_SHA3, SVE2_SM4, SVE2_BITPERM): New macros for feature set addresses. (SVE2_INSN, SVE2_INSNC, SVE2AES_INSN, SVE2SHA3_INSN, SVE2SM4_INSN, SVE2SM4_INSNC, SVE2BITPERM_INSN): New macros.
2019-05-06Add load-link, store-conditional paired EVA instructionsFaraz Shahbazker3-3/+22
Add paired load-link and store-conditional instructions to the EVA ASE for MIPS32R6[1]. These instructions are optional within the EVA ASE. Their presence is indicated by the XNP bit in the Config5 register. [1] "MIPS Architecture for Programmers Volume II-A: The MIPS32 Instruction Set Manual", Imagination Technologies Ltd., Document Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical List of Instructions", pp. 230-231, pp. 357-360. gas/ * config/tc-mips.c (mips_set_ase): Handle ASE_EVA_R6. (macro) <M_LLWPE_AB, M_SCWPE_AB>: New cases. (mips_after_parse_args): Translate EVA to EVA_R6. * testsuite/gas/mips/ase-errors-1.s: Add new instructions. * testsuite/gas/mips/eva.s: Likewise. * testsuite/gas/mips/ase-errors-1.l: Check errors for new instructions. * testsuite/gas/mips/mipsr6@eva.d: Check new test cases. include/ * opcode/mips.h (ASE_EVA_R6): New macro. (M_LLWPE_AB, M_SCWPE_AB): New enum values. opcodes/ * mips-dis.c (mips_calculate_combination_ases): Add ISA argument and set ASE_EVA_R6 appropriately. (set_default_mips_dis_options): Pass ISA to above. (parse_mips_dis_option): Likewise. * mips-opc.c (EVAR6): New macro. (mips_builtin_opcodes): Add llwpe, scwpe. Derived from patch authored by Andrew Bennett <andrew.bennett@imgtec.com>
2019-05-01[BINUTILS, AArch64] Enable Transactional Memory ExtensionSudakshina Das6-1086/+1136
This patch enables the new Transactional Memory Extension added recently as part of Arm's new architecture technologies. We introduce a new optional extension "tme" to enable this. The following instructions are part of the extension: * tstart <Xt> * ttest <Xt> * tcommit * tcancel #<imm> The ISA for the above can be found here: https://developer.arm.com/docs/ddi0602/latest/base-instructions-alphabetic-order *** gas/ChangeLog *** 2019-05-01 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (parse_operands): Add case for AARCH64_OPND_TME_UIMM16. (aarch64_features): Add "tme". * doc/c-aarch64.texi: Document the same. * testsuite/gas/aarch64/tme-invalid.d: New test. * testsuite/gas/aarch64/tme-invalid.l: New test. * testsuite/gas/aarch64/tme-invalid.s: New test. * testsuite/gas/aarch64/tme.d: New test. * testsuite/gas/aarch64/tme.s: New test. *** include/ChangeLog *** 2019-05-01 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_TME): New. (enum aarch64_opnd): Add AARCH64_OPND_TME_UIMM16. *** opcodes/ChangeLog *** 2019-05-01 Sudakshina Das <sudi.das@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-opc.c (operand_general_constraint_met_p): Add case for AARCH64_OPND_TME_UIMM16. (aarch64_print_operand): Likewise. * aarch64-tbl.h (QL_IMM_NIL): New. (TME): New. (_TME_INSN): New. (struct aarch64_opcode): Add tstart, tcommit, ttest and tcancel.
2019-04-29S12Z: Opcodes: Fix crash when trying to decode a truncated operation.John Darrington2-1/+5
opcodes/ * s12z-opc.c (shift_discrim): Return OP_INVALID when reading fails. gas/ * testsuite/gas/s12z/truncated.d: New file. * testsuite/gas/s12z/truncated.s: New file. * testsuite/gas/s12z/s12z.exp: Add new test.
2019-04-26[MIPS] Add load-link, store-conditional paired instructionsAndrew Bennett2-0/+13
Add several baseline MIPS32R6[1] and MIPS64R6[2] instructions that were omitted from the initial spec. These instructions are optional in implementations but not associated with any ASE or pseudo-ASE. Their presence is indicated by the XNP bit in the Config5 register. [1] "MIPS Architecture for Programmers Volume II-A: The MIPS32 Instruction Set Manual", Imagination Technologies Ltd., Document Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical List of Instructions", pp. 228-229, pp. 354-357. [2] "MIPS Architecture for Programmers Volume II-A: The MIPS64 Instruction Set Manual", Imagination Technologies Ltd., Document Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical List of Instructions", pp. 289-290 and pp. 458-460. gas/ * config/tc-mips.c (macro) <M_LLWP_AB, M_LLDP_AB, M_SCWP_AB, M_SCDP_AB>: New cases and expansions for paired instructions. * testsuite/gas/mips/llpscp-32.s: New test source. * testsuite/gas/mips/llpscp-64.s: Likewise. * testsuite/gas/mips/llpscp-32.d: New test. * testsuite/gas/mips/llpscp-64.d: Likewise. * testsuite/gas/mips/mips.exp: Run the new tests. * testsuite/gas/mips/r6.s: Add new instructions to test source. * testsuite/gas/mips/r6-64.s: Likewise. * testsuite/gas/mips/r6-64-n32.d: Check new instructions. * testsuite/gas/mips/r6-64-n64.d: Likewise. * testsuite/gas/mips/r6-n32.d: Likewise. * testsuite/gas/mips/r6-n64.d: Likwwise. * testsuite/gas/mips/r6.d: Likewise. include/ * opcode/mips.h (M_LLWP_AB, M_LLDP_AB): New enum values. (M_SCWP_AB, M_SCDP_AB): Likewise. opcodes/ * mips-opc.c (mips_builtin_opcodes): Add llwp, lldp, scwp, scdp.
2019-04-24S12Z: Opcodes: Handle bit map operations with non-canonical operands.John Darrington2-3/+6
opcodes/ * s12z-opc.c (bm_decode): Handle the RESERVERD0 case. gas/ * testsuite/gas/s12z/bit-manip-invalid.d: Extend the test. * testsuite/gas/s12z/bit-manip-invalid.s: Extend the test.
2019-04-24S12Z: s12z-opc.h: Add extern "C" bracketingJohn Darrington2-1/+13
opcodes/ * s12z-opc.h: Add extern "C" bracketing to help users who wish to use this interface in c++ code.
2019-04-15[binutils, ARM, 16/16] Add support to VLDR and VSTR of system registersAndre Vieira2-1/+59
GNU as' Arm backend assumes each mnemonic has a single entry in the instruction table but VLDR (system register) and VSTR (system register) are different instructions than VLDR and VSTR. It is thus necessary to add some form of demultiplexing in the parser. It starts by creating a new operand type OP_VLDR which indicate that the operand is either the existing OP_RVSD operand or a system register. The function parse_operands () then tries these two cases in order, calling the new parse_sys_vldr_vstr for the second case. Since the encoding function is specified in the instruction table entry, it also need to have some sort of demultiplexing. This is done in do_vldr_vstr which either calls the existing do_neon_ldr_str () or calls the new do_t_vldr_vstr_sysreg (). A new internal relocation is needed as well since the offset has a shorter range than in other Thumb coprocessor instructions. Disassembly also requires special care since VSTR (system register) reuse the STC encoding with the coprocessor number 15. Armv8.1-M Mainline ARM manual states that coprocessor 8, 14 and 15 are reserved for floating-point and MVE instructions a feature bit check is added if the coprocessor number is one of this value and we are trying to match a coprocessor instruction (eg. STC) to forbid the match. ChangeLog entries are as follows: *** bfd/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * reloc.c (BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM): New internal relocation. * bfd-in2.h: Regenerate. * libbfd.h: Likewise. *** gas/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * config/tc-arm.c (parse_sys_vldr_vstr): New function. (OP_VLDR): New enum operand_parse_code enumerator. (parse_operands): Add logic for OP_VLDR. (do_t_vldr_vstr_sysreg): New function. (do_vldr_vstr): Likewise. (insns): Guard VLDR and VSTR by arm_ext_v4t for Thumb mode. (md_apply_fix): Add bound check for VLDR and VSTR co-processor offset. Add masking logic for BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM relocation. * testsuite/gas/arm/archv8m_1m-cmse-main-bad.s: Add examples of bad uses of VLDR and VSTR. * testsuite/gas/arm/archv8m_1m-cmse-main-bad.l: Add error messages for above bad uses. * testsuite/gas/arm/archv8m_1m-cmse-main.s: Add examples of VLDR and VSTR valid uses. * testsuite/gas/arm/archv8m_1m-cmse-main.d: Add disassembly for the above examples. *** opcodes/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * arm-dis.c (coprocessor_opcodes): Document new %J and %K format specifier. Add entries for VLDR and VSTR of system registers. (print_insn_coprocessor): Forbid coprocessor numbers 8, 14 and 15 in coprocessor instructions on Armv8.1-M Mainline targets. Add handling of %J and %K format specifier.
2019-04-15[binutils, ARM, 15/16] Add support for VSCCLRMAndre Vieira2-0/+38
Like for CLRM, this patch aims to share as much logic with the similar looking VLDM/VSTM. This is achieved by adding 2 new enumerator values in enum reg_list_els for the single-precision and double-precision variants of VSCCLRM and extending parse_vfp_reg_list () to deal with these types. These behave like the existing REGLIST_VFP_S and REGLIST_VFP_D types with extra logic to expect VPR as the last element in the register list. The function is algo augmented with a new partial_match parameter to indicate if any register other than VPR had already been parsed in the register list so as to not try parsing the second variant if that's the case and return the right error message. The rest of the patch is the usual encoding function, new disassembler table entries and format specifier and parsing, encoding and disassembling tests. It is worth mentioning that the new entry in the disassembler table was added in the coprocessor-related table despite VSCCLRM always being available even in FPU-less configurations. The main reason for this is that VSCCLRM also match VLDMIA entry and must thus be tried first but coprocessor entries are tried before T32 entries. It also makes sense because it is in the same encoding space as coprocessor and VFP instructions and is thus the natural place for someone to look for this instruction. Note: Both variants of VSCCLRM support D16-D31 registers but Armv8.1-M Mainline overall does not. I have thus decided not to implement support for these registers in order to keep the code simpler. It can always be added later if needed. ChangeLog entries are as follows: *** gas/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * config/tc-arm.c (arm_typed_reg_parse): Fix typo in comment. (enum reg_list_els): New REGLIST_VFP_S_VPR and REGLIST_VFP_D_VPR enumerators. (parse_vfp_reg_list): Add new partial_match parameter. Set *partial_match to TRUE if at least one element in the register list has matched. Add support for REGLIST_VFP_S_VPR and REGLIST_VFP_D_VPR register lists which expect VPR as last element in the list. (s_arm_unwind_save_vfp_armv6): Adapt call to parse_vfp_reg_list to new prototype. (s_arm_unwind_save_vfp): Likewise. (enum operand_parse_code): New OP_VRSDVLST enumerator. (parse_operands): Adapt call to parse_vfp_reg_list to new prototype. Handle new OP_VRSDVLST case. (do_t_vscclrm): New function. (insns): New entry for VSCCLRM instruction. * testsuite/gas/arm/archv8m_1m-cmse-main-bad.s: Add invalid VSCCLRM instructions. * testsuite/gas/arm/archv8m_1m-cmse-main-bad.l: Add error expectations for above instructions. * testsuite/gas/arm/archv8m_1m-cmse-main.s: Add tests for VSCCLRM instruction. * testsuite/gas/arm/archv8m_1m-cmse-main.d: Add expected disassembly for above instructions. *** opcodes/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * arm-dis.c (coprocessor_opcodes): Document new %C format control code. Add new entries for VSCCLRM instruction. (print_insn_coprocessor): Handle new %C format control code.
2019-04-15[opcodes, ARM, 14/16] Add mode availability to coprocessor table entriesAndre Vieira2-413/+443
The coprocessor_opcodes table is used both to share commonalities in coprocessor-related instructions and to avoid duplication between Arm and Thumb mode. However, some instructions do have differences between Arm and Thumb. For instance, vldmia allows PC as base register in Arm mode but not in Thumb mode. In that very case the distinction becomes necessary because the encoding with PC as base register is used in Thumb mode to denote a VSCCLRM. It is thus necessary to distinguish what is Arm or Thumb only from what is shared. This patch adds an extra field to the coprocessor_opcodes table entries to indicate what mode is a given instruction available in. The print_insn_coprocessor then uses that field to determine if an entry that matched the mark and value checked should be allowed to match or not given the current mode. ChangeLog entry is as follows: *** opcodes/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * arm-dis.c (enum isa): New enum. (struct sopcode32): New structure. (coprocessor_opcodes): change type of entries to struct sopcode32 and set isa field of all current entries to ANY. (print_insn_coprocessor): Change type of insn to struct sopcode32. Only match an entry if its isa field allows the current mode.
2019-04-15[binutils, ARM, 13/16] Add support for CLRMAndre Vieira2-2/+21
Given the similarity between LDM/STM and CLRM register lists, most of the changes in this patch aim at sharing code between those two sets of instruction. Sharing is achieved both in parsing and encoding of those instructions. In terms of parsing, parse_reg_list () is extended to take a type that describe what type of instruction is being parsed. The reg_list_els used for parse_vfp_reg_list () is reused for the type and that function is added an assert for the new REGLIST_CLRM and REGLIST_RN enumerators. parse_reg_list () is then taught to accept APSR and reject SP and PC when parsing for a CLRM instruction. At last, caller of parse_reg_list () is updated accordingly and logic is added for the new OP_CLRMLST operand. Encoding-wise, encode_thumb2_ldmstm () is reused to encode the variable bits of CLRM and is thus renamed encode_thumb2_multi (). A new do_io parameter is added to distinguish between LDM/STM and CLRM which guard all the LDM/STM specific code of the function. Finally objdump is told how to disassemble CLRM, again reusing the logic to print the LDM/STM register list (format specifier 'm'). Tests are also added in the form of negative tests to check parsing and encoding/disassembling tests. ChangeLog entries are as follows: *** gas/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * config/tc-arm.c (enum reg_list_els): Define earlier and add REGLIST_RN and REGLIST_CLRM enumerators. (parse_reg_list): Add etype parameter to distinguish between regular core register list and CLRM register list. Add logic to recognize CLRM register list. (parse_vfp_reg_list): Assert type is not for core register list. (s_arm_unwind_save_core): Update call to parse_reg_list to new prototype. (enum operand_parse_code): Declare OP_CLRMLST enumerator. (parse_operands): Update call to parse_reg_list to new prototype. Add logic for OP_CLRMLST. (encode_thumb2_ldmstm): Rename into ... (encode_thumb2_multi): This. Add do_io parameter. Add logic to encode CLRM and guard LDM/STM only code by do_io. (do_t_ldmstm): Adapt to use encode_thumb2_multi. (do_t_push_pop): Likewise. (do_t_clrm): New function. (insns): Define CLRM. * testsuite/gas/arm/archv8m_1m-cmse-main-bad.d: New file. * testsuite/gas/arm/archv8m_1m-cmse-main-bad.l: Likewise. * testsuite/gas/arm/archv8m_1m-cmse-main-bad.s: Likewise. * testsuite/gas/arm/archv8m_1m-cmse-main.d: Likewise. * testsuite/gas/arm/archv8m_1m-cmse-main.s: Likewise. *** opcodes/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * arm-dis.c (thumb_opcodes): Document %n control code. Add entry for CLRM. (print_insn_thumb32): Add logic to print %n CLRM register list.
2019-04-15[binutils, ARM, 12/16] Scalar Low Overhead loop instructions for Armv8.1-M ↵Andre Vieira2-0/+42
Mainline s patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils. This patch adds support to the Scalar low overhead loop instructions: LE WLS DLS We also add a new assembler resolvable relocation bfd_reloc_code_real enum for the 12-bit branch offset used in these instructions. ChangeLog entries are as follows: *** bfd/ChnageLog *** 2019-04-12 Sudakshina Das <sudi.das@arm.com> * reloc.c (BFD_RELOC_ARM_THUMB_LOOP12): New. * bfd-in2.h: Regenerated. * libbfd.h: Regenerated. *** gas/ChangeLog *** 2019-04-12 Sudakshina Das <sudi.das@arm.com> Andre Vieira <andre.simoesdiasvieira@arm.com> * config/tc-arm.c (operand_parse_code): Add OP_LR and OP_oLR for the LR operand and optional LR operand. (parse_operands): Add switch cases for OP_LR and OP_oLR for both type checking and value checking. (encode_thumb32_addr_mode): New entries for DLS, WLS and LE. (v8_1_loop_reloc): New helper function for handling labels for the low overhead loop instructions. (do_t_loloop): New function to encode DLS, WLS and LE. (insns): New entries for WLS, DLS and LE. (md_pcrel_from_section): New switch case for BFD_RELOC_ARM_THUMB_LOOP12. (md_appdy_fix): Likewise. (tc_gen_reloc): Likewise. * testsuite/gas/arm/armv8_1-m-tloop.s: New. * testsuite/gas/arm/armv8_1-m-tloop.d: New. * testsuite/gas/arm/armv8_1-m-tloop-bad.s: New. * testsuite/gas/arm/armv8_1-m-tloop-bad.d: New. * testsuite/gas/arm/armv8_1-m-tloop-bad.l: New. *** opcodes/ChangeLog *** 2019-04-12 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (print_insn_thumb32): Updated to accept new %P and %Q patterns.
2019-04-15[binutils, ARM, 11/16] New BFCSEL instruction for Armv8.1-M MainlineAndre Vieira2-0/+13
s patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils. This patch adds the BFCSEL instruction. It also adds a local relocation with a new bfd_reloc_code_real enum. ChangeLog entries are as follows: 2019-04-15 Sudakshina Das <sudi.das@arm.com> * reloc.c (BFD_RELOC_THUMB_PCREL_BFCSEL): New relocation. * bfd-in2.h: Regenerated. * libbfd.h: Likewise. *** gas/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> Andre Vieira <andre.simoesdiasvieira@arm.com> * config/tc-arm.c (T16_32_TAB): New entriy for bfcsel. (do_t_v8_1_branch): New switch case for bfcsel. (toU): Define. (insns): New instruction for bfcsel. (md_pcrel_from_section): New switch case for BFD_RELOC_THUMB_PCREL_BFCSEL. (md_appdy_fix): Likewise (tc_gen_reloc): Likewise. * testsuite/gas/arm/armv8_1-m-bfcsel.d: New. * testsuite/gas/arm/armv8_1-m-bfcsel.s: New. *** ld/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * testsuite/ld-arm/bfcsel.s: New. * testsuite/ld-arm/bfcsel.d: New. * testsuite/ld-arm/arm-elf.exp: Add above test. *** opcodes/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (thumb32_opcodes): New instruction bfcsel. (print_insn_thumb32): Edit the switch case for %Z.
2019-04-15[binutils, ARM, 10/16] BFCSEL infrastructure with new global reloc ↵Andre Vieira2-0/+22
R_ARM_THM_BF12 This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils. This adds infrastructure for the BFCSEL instructions which is one of the first instructions in Arm that have more than one relocations in them. This adds a new relocation R_ARM_THM_BF12. The inconsistency between external R_ARM_THM_BF12 and internal BFD_RELOC_ARM_THUMB_BF13 is because internally we count the static bit-0 of the immediate and we don't externally. ChangeLog entries are as follows : ChangeLog entries are as follows : *** bfd/ChnageLog *** 2019-04-04 Sudakshina Das <sudi.das@arm.com> * reloc.c (BFD_RELOC_ARM_THUMB_BF13): New. * bfd-in2.h: Regenerated. * libbfd.h: Regenerated. * elf32-arm.c (elf32_arm_howto_table_1): New entry for R_ARM_THM_BF13. (elf32_arm_reloc_map elf32_arm_reloc_map): Map BFD_RELOC_ARM_THUMB_BF13 and R_ARM_THM_BF12 together. (elf32_arm_final_link_relocate): New switch case for R_ARM_THM_BF13. *** elfcpp/ChangeLog *** 2019-04-04 Sudakshina Das <sudi.das@arm.com> * arm.h (R_ARM_THM_BF12): New relocation code. *** gas/ChangeLog *** 2019-04-04 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (md_pcrel_from_section): New switch case for BFD_RELOC_ARM_THUMB_BF13. (md_appdy_fix): Likewise. (tc_gen_reloc): Likewise. *** include/ChangeLog *** 2019-04-04 Sudakshina Das <sudi.das@arm.com> * elf/arm.h (START_RELOC_NUMBERS): New entry for R_ARM_THM_BF12. *** opcodes/ChangeLog *** 2019-04-04 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (print_insn_thumb32): Updated to accept new %Z pattern.
2019-04-15[binutils, ARM, 9/16] New BFL instruction for Armv8.1-M MainlineAndre Vieira2-0/+6
This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils. This patch adds the BFL instruction. *** gas/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> Andre Vieira <andre.simoesdiasvieira@arm.com> * config/tc-arm.c (T16_32_TAB): New entrie for bfl. (do_t_v8_1_branch): New switch case for bfl. (insns): New instruction for bfl. * testsuite/gas/arm/armv8_1-m-bfl.d: New. * testsuite/gas/arm/armv8_1-m-bfl.s: New. * testsuite/gas/arm/armv8_1-m-bfl-bad.s: New. * testsuite/gas/arm/armv8_1-m-bfl-bad.d: New. * testsuite/gas/arm/armv8_1-m-bfl-bad.l: New. * testsuite/gas/arm/armv8_1-m-bfl-rel.d: New. * testsuite/gas/arm/armv8_1-m-bfl-rel.s: New. *** ld/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * testsuite/ld-arm/bfl.s: New. * testsuite/ld-arm/bfl.d: New. * testsuite/ld-arm/arm-elf.exp: Add above test. *** opcodes/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (thumb32_opcodes): New instruction bfl.
2019-04-15[binutils, ARM, 8/16] BFL infrastructure with new global reloc R_ARM_THM_BF18Andre Vieira2-0/+22
This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils. This adds infrastructure for the BFL instructions which is one of the first instructions in Arm that have more than one relocations in them. This adds a new relocation R_ARM_THM_BF18. The inconsistency between external R_ARM_THM_BF18 and internal BFD_RELOC_ARM_THUMB_BF19 is because internally we count the static bit-0 of the immediate and we don't externally. ChangeLog entries are as follows : *** bfd/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * reloc.c (BFD_RELOC_ARM_THUMB_BF19): New * libbfd.h: Regenerated. * bfd-in2.h: Regenerated. * bfd-elf32-arm.c (elf32_arm_howto_table_1): New entry for R_ARM_THM_BF18. (elf32_arm_reloc_map elf32_arm_reloc_map): Map BFD_RELOC_ARM_THUMB_BF19 and R_ARM_THM_BF18 together. (elf32_arm_final_link_relocate): New switch case for R_ARM_THM_BF19. *** elfcpp/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm.h (R_ARM_THM_BF18): New relocation code. *** gas/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (md_pcrel_from_section): New switch case for BFD_RELOC_ARM_THUMB_BF19. (md_appdy_fix): Likewise. (tc_gen_reloc): Likewise. *** include/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * elf/arm.h (START_RELOC_NUMBERS): New entry for R_ARM_THM_BF18. *** opcodes/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (print_insn_thumb32): Updated to accept new %Y pattern.
2019-04-15[binutils, ARM, 7/16] New BFX and BFLX instruction for Armv8.1-M MainlineAndre Vieira2-0/+15
This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils. This patch adds the BFX and BFLX instructions. ChangeLog entries are as follows : *** gas/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (T16_32_TAB): New entries for bfx and bflx. (do_t_v8_1_branch): New switch cases for bfx and bflx. (insns): New instruction for bfx and bflx. * testsuite/gas/arm/armv8_1-m-bf-exchange.d: New. * testsuite/gas/arm/armv8_1-m-bf-exchange.s: New. * testsuite/gas/arm/armv8_1-m-bf-exchange-bad.s: New * testsuite/gas/arm/armv8_1-m-bf-exchange-bad.l: New * testsuite/gas/arm/armv8_1-m-bf-exchange-bad.d: New *** opcodes/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (print_insn_thumb32): Add '%<bitfield>S' to print an Arm register with r13 and r15 unpredictable. (thumb32_opcodes): New instructions for bfx and bflx.
2019-04-15[binutils, ARM, 6/16] New BF instruction for Armv8.1-M MainlineAndre Vieira2-0/+9
This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils. This patch adds the BF instruction. ChangeLog entries are as follows: *** gas/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> Andre Vieira <andre.simoesdiasvieira@arm.com> * config/tc-arm.c (T16_32_TAB): New entries for bf. (do_t_branch_future): New. (insns): New instruction for bf. * testsuite/gas/arm/armv8_1-m-bf.d: New. * testsuite/gas/arm/armv8_1-m-bf.s: New. * testsuite/gas/arm/armv8_1-m-bf-bad.s: New. * testsuite/gas/arm/armv8_1-m-bf-bad.l: New. * testsuite/gas/arm/armv8_1-m-bf-bad.d: New. * testsuite/gas/arm/armv8_1-m-bf-rel.d: New. * testsuite/gas/arm/armv8_1-m-bf-rel.s: New. *** ld/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * testsuite/ld-arm/bf.s: New. * testsuite/ld-arm/bf.d: New. * testsuite/ld-arm/arm-elf.exp: Add above test. *** opcodes/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (thumb32_opcodes): New instructions for bf.
2019-04-15[binutils, ARM, 5/16] BF insns infrastructure with new global reloc ↵Andre Vieira2-0/+22
R_ARM_THM_BF16 This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils. This adds infrastructure for the BF instructions which is one of the first instructions in Arm that have more than one relocations in them. This is the third infrastructure patch that adds a new relocation R_ARM_THM_BF16. The inconsistency between external R_ARM_THM_BF16 and internal BFD_RELOC_ARM_THUMB_BF17 is because internally we count the static bit-0 of the immediate and we don't externally. ChangeLog entries are as follows : *** bfd/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * reloc.c (BFD_RELOC_ARM_THUMB_BF17): New enum. * bfd-in2.h: Regenerated. * libbfd.h: Regenerated. * bfd-elf32-arm.c (elf32_arm_howto_table_1): New entry for R_ARM_THM_BF16. (elf32_arm_reloc_map elf32_arm_reloc_map): Map BFD_RELOC_ARM_THUMB_BF17 and R_ARM_THM_BF16 together. (get_value_helper): New reloc helper. (elf32_arm_final_link_relocate): New switch case for R_ARM_THM_BF16. *** elfcpp/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm.h (R_ARM_THM_BF16): New relocation code. *** gas/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (md_pcrel_from_section): New switch case for BFD_RELOC_ARM_THUMB_BF17. (md_appdy_fix): Likewise. (tc_gen_reloc): Likewise. *** include/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * elf/arm.h (START_RELOC_NUMBERS): New entry for R_ARM_THM_BF16. *** opcodes/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (print_insn_thumb32): Updated to accept new %W pattern.
2019-04-15[binutils, ARM, 3/16] BF insns infrastructure with new bfd_reloc_code_real ↵Andre Vieira2-0/+12
for fallback branch This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils. This adds infrastructure for the Branch Future instructions (BF, BFX, BFL, BFLX, BFCSEL). These are the first instructions in ARM that have more than one relocations in them. This is the first infrastructure patch that adds a new bfd_reloc_code_real enum for the fallback branch offset. This is common for all such instructions and needs to be resolvable by the assembler. ChangeLog entries are as follows : *** bfd/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * reloc.c (BFD_RELOC_THUMB_PCREL_BRANCH5): New enum. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. *** gas/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (md_pcrel_from_section): New switch case for BFD_RELOC_THUMB_PCREL_BRANCH5. (v8_1_branch_value_check): New function to check branch offsets. (md_appdy_fix): New switch case for BFD_RELOC_THUMB_PCREL_BRANCH5. (tc_gen_reloc): Likewise. *** opcodes/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (print_insn_thumb32): Updated to accept new %G pattern.
2019-04-15[binutils, ARM, 1/16] Add support for Armv8.1-M Mainline CLIAndre Vieira2-0/+5
The patch is straightforward, it does the following: - support the new Tag_CPU_arch build attribute value, ie.: + declare the new value + update all the asserts forcing logic to be reviewed for new architectures + create a corresponding bfd_mach_arm_8_1M_MAIN enumerator in bfd and add mapping from Tag_CPU_arch to it + teach readelf about new Tag_CPU_arch value - declare armv8.1-m.main as a supported architecture value - define Armv8.1-M Mainline in terms of feature bits available - tell objdump mapping from bfd_mach_arm_8_1M_MAIN enumerator to feature bits available - update architecture-specific logic in gas and bfd guarded by the asserts mentioned above. - tests for all the above ChangeLog entries are as follows: *** bfd/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * archures.c (bfd_mach_arm_8_1M_MAIN): Define. * bfd-in2.h: Regenerate. * cpu-arm.c (arch_info_struct): Add entry for Armv8.1-M Mainline. * elf32-arm.c (using_thumb_only): Return true for Armv8.1-M Mainline and update assert. (using_thumb2): Likewise. (using_thumb2_bl): Update assert. (arch_has_arm_nop): Likewise. (bfd_arm_get_mach_from_attributes): Add case for Armv8.1-M Mainline. (tag_cpu_arch_combine): Add logic for Armv8.1-M Mainline merging. *** binutils/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * readelf.c (arm_attr_tag_CPU_arch): Add entry for Armv8.1-M Mainline. *** gas/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * config/tc-arm.c (cpu_arch_ver): Add entry for Armv8.1-M Mainline Tag_CPU_arch build attribute value. Reindent. (get_aeabi_cpu_arch_from_fset): Update assert. (aeabi_set_public_attributes): Update assert for Tag_DIV_use logic. * testsuite/gas/arm/attr-march-armv8_1-m.main.d: New test. *** include/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * elf/arm.h (TAG_CPU_ARCH_V8_1M_MAIN): new macro. (MAX_TAG_CPU_ARCH): Set value to above macro. * opcode/arm.h (ARM_EXT2_V8_1M_MAIN): New macro. (ARM_AEXT_V8_1M_MAIN): Likewise. (ARM_AEXT2_V8_1M_MAIN): Likewise. (ARM_ARCH_V8_1M_MAIN): Likewise. *** ld/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * testsuite/ld-arm/attr-merge-13.attr: New test. * testsuite/ld-arm/attr-merge-13a.s: New test. * testsuite/ld-arm/attr-merge-13b.s: New test. *** opcodes/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * arm-dis.c (select_arm_features): Add logic for Armv8.1-M Mainline.
2019-04-12S12Z: opcodes: Replace "operator" with "optr".John Darrington4-29/+34
opcodes/ * s12z-dis.c, s12z-opc.c, s12z-opc.h: Replace operator with optr.
2019-04-11[BINUTILS, AArch64, 2/2] Update Store Allocation Tag instructionsSudakshina Das6-165/+186
This patch updates the Store allocation tags instructions in Armv8.5-A Memory Tagging Extension. This is part of the changes that have been introduced recently in the 00bet10 release All of these instructions have an updated register operand (Xt -> <Xt|SP>) - STG <Xt|SP>, [<Xn|SP>, #<simm>] - STG <Xt|SP>, [<Xn|SP>, #<simm>]! - STG <Xt|SP>, [<Xn|SP>], #<simm> - STZG <Xt|SP>, [<Xn|SP>, #<simm>] - STZG <Xt|SP>, [<Xn|SP>, #<simm>]! - STZG <Xt|SP>, [<Xn|SP>], #<simm> - ST2G <Xt|SP>, [<Xn|SP>, #<simm>] - ST2G <Xt|SP>, [<Xn|SP>, #<simm>]! - ST2G <Xt|SP>, [<Xn|SP>], #<simm> - STZ2G <Xt|SP>, [<Xn|SP>, #<simm>] - STZ2G <Xt|SP>, [<Xn|SP>, #<simm>]! - STZ2G <Xt|SP>, [<Xn|SP>], #<simm> In order to accept <Rt|SP> a new operand type Rt_SP is introduced which has the same field as FLD_Rt but follows other semantics of Rn_SP. *** gas/ChangeLog *** 2019-04-11 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (process_omitted_operand): Add case for AARCH64_OPND_Rt_SP. (parse_operands): Likewise. * testsuite/gas/aarch64/armv8_5-a-memtag.d: Update tests. * testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise. * testsuite/gas/aarch64/illegal-memtag.l: Likewise. * testsuite/gas/aarch64/illegal-memtag.s: Likewise. *** include/ChangeLog *** 2019-04-11 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_Rt_SP. *** opcodes/ChangeLog *** 2019-04-11 Sudakshina Das <sudi.das@arm.com> * aarch64-opc.c (aarch64_print_operand): Add case for AARCH64_OPND_Rt_SP. (verify_constraints): Likewise. * aarch64-tbl.h (QL_LDST_AT): Update to add SP qualifier. (struct aarch64_opcode): Update stg, stzg, st2g, stz2g instructions to accept Rt|SP as first operand. (AARCH64_OPERANDS): Add new Rt_SP. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated.
2019-04-11[BINUTILS, AArch64, 1/2] Add new LDGM/STGM instructionSudakshina Das5-1541/+1572
This patch adds the new LDGM/STGM instructions of the Armv8.5-A Memory Tagging Extension. This is part of the changes that have been introduced recently in the 00bet10 release The instructions are as follows: LDGM Xt, [<Xn|SP>] STGM Xt, [<Xn|SP>] *** gas/ChangeLog *** 2019-04-11 Sudakshina Das <sudi.das@arm.com> * testsuite/gas/aarch64/armv8_5-a-memtag.d: New tests for ldgm and stgm. * testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise. * testsuite/gas/aarch64/illegal-memtag.l: Likewise. * testsuite/gas/aarch64/illegal-memtag.s: Likewise. *** opcodes/ChangeLog *** 2019-04-11 Sudakshina Das <sudi.das@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Likewise. * aarch64-opc-2.c: Likewise. * aarch64-tbl.h (aarch64_opcode): Add new ldgm and stgm.
2019-04-09[MIPS] Add RDHWR with the SEL field for MIPS R6.Robert Suchanek2-0/+5
In Release 6 of the MIPS architecture [1], instruction RDHWR supports a 3rd operand to serve as the 3-bit select field for the hardware register. [1] "MIPS Architecture for Programmers Volume II-A: The MIPS32 Instruction Set Manual", Imagination Technologies Ltd., Document Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical List of Instructions", pp. 332-334 opcodes/ * mips-opc.c (mips_builtin_opcodes): Add RDHWR rt rd sel. gas/ * testsuite/gas/mips/mips.exp: Run hwr-names test. * testsuite/gas/mips/hwr-names.s: Add test cases for RDHWR with the SEL field. * testsuite/gas/mips/mipsr6@hwr-names.d: New file.
2019-04-08x86: Consolidate AVX512 BF16 entries in i386-opc.tblH.J. Lu3-282/+34
1. Use single entry for vcvtne2ps2bf16 and vdpbf16ps with Disp8ShiftVL. 2. Use 5 entries, instead of 8, for vcvtneps2bf16. * i386-opc.tbl: Consolidate AVX512 BF16 entries. * i386-init.h: Regenerated.
2019-04-07print_insn_powerpc tidyAlan Modra2-26/+29
* ppc-dis.c (print_insn_powerpc): Use a tiny state machine op_separator to control printing of spaces, comma and parens rather than need_comma, need_paren and spaces vars.
2019-04-07PR24421, Wrong brackets in opcodes/arm-dis.cAlan Modra2-213/+219
PR 24421 * arm-dis.c (print_insn_coprocessor): Correct bracket placement. (print_insn_neon, print_insn_arm): Likewise.
2019-04-05x86: Support Intel AVX512 BF16Xuepeng Guo8-4133/+4576
Add assembler and disassembler support Intel AVX512 BF16: https://software.intel.com/en-us/download/intel-architecture-instruction-set-extensions-programming-reference gas/ 2019-04-05 Xuepeng Guo <xuepeng.guo@intel.com> * config/tc-i386.c (cpu_arch): Add .avx512_bf16. (cpu_noarch): Add noavx512_bf16. * doc/c-i386.texi: Document avx512_bf16. * testsuite/gas/i386/avx512_bf16.d: New file. * testsuite/gas/i386/avx512_bf16.s: Likewise. * testsuite/gas/i386/avx512_bf16_vl-inval.l: Likewise. * testsuite/gas/i386/avx512_bf16_vl-inval.s: Likewise. * testsuite/gas/i386/avx512_bf16_vl.d: Likewise. * testsuite/gas/i386/avx512_bf16_vl.s: Likewise. * testsuite/gas/i386/x86-64-avx512_bf16.d: Likewise. * testsuite/gas/i386/x86-64-avx512_bf16.s: Likewise. * testsuite/gas/i386/x86-64-avx512_bf16_vl-inval.l: Likesie. * testsuite/gas/i386/x86-64-avx512_bf16_vl-inval.s: Likewise. * testsuite/gas/i386/x86-64-avx512_bf16_vl.d: Likewise. * testsuite/gas/i386/x86-64-avx512_bf16_vl.s: Likewise. * testsuite/gas/i386/i386.exp: Add BF16 related tests. opcodes/ 2019-04-05 Xuepeng Guo <xuepeng.guo@intel.com> * i386-dis-evex.h (evex_table): Updated to support BF16 instructions. * i386-dis.c (enum): Add EVEX_W_0F3852_P_1, EVEX_W_0F3872_P_1 and EVEX_W_0F3872_P_3. * i386-gen.c (cpu_flag_init): Add CPU_AVX512_BF16_FLAGS. (cpu_flags): Add bitfield for CpuAVX512_BF16. * i386-opc.h (enum): Add CpuAVX512_BF16. (i386_cpu_flags): Add bitfield for cpuavx512_bf16. * i386-opc.tbl: Add AVX512 BF16 instructions. * i386-init.h: Regenerated. * i386-tbl.h: Likewise.
2019-04-05PowerPC bc extended branch mnemonics and "y" hintsAlan Modra2-141/+148
This patch fixes a problem with disassembly of branch instructions for processors complying with PowerPC ISA versions prior to version 2.0, ie. those that use "y" bit branch taken hints. Many of the extended bcctr and bclr mnemonics that should have disassembled with a "-" suffix, ie. not taken, did not display the "-" due to the ordering in powerpc_opcodes. I believe it's been that way from the original 85dcf36d72b commit of ppc-opc.c. I've also added a BH field (optional) to a few opcodes. This gives better disassembly in raw mode, showing the branch taken hint in the mnemonic as is done for bc. It would be reasonable to add a BH field to all bcctr, bclr, and bctar extended mnemonics but that runs into a small difficulty: Currently we print all or none of the optional operands. That means for example that "bgectr cr2" would display as "bgectr cr2,0" if a BH field is added to bgectr. * ppc-opc.c (XLBH_MASK): Subtract off BH field from BB_MASK. (powerpc_opcodes): Reorder bcctr and bclr extended mnemonics to favour printing of "-" branch hint when using the "y" bit. Allow BH field on bc{ctr,lr,tar}{,l}{-,+}.
2019-04-05PowerPC disassembler: Don't emit trailing spacesAlan Modra2-4/+16
When an instruction has operands, the PowerPC disassembler prints spaces after the opcode so as to line up operands. If the operands are all optional and all default value, then no operands are printed, leaving trailing spaces. This patch fixes that. opcodes/ * ppc-dis.c (print_insn_powerpc): Delay printing spaces after opcode until first operand is output. gas/ * testsuite/gas/ppc/476.d: Remove trailing spaces. * testsuite/gas/ppc/a2.d: Likewise. * testsuite/gas/ppc/booke.d: Likewise. * testsuite/gas/ppc/booke_xcoff.d: Likewise. * testsuite/gas/ppc/e500.d: Likewise. * testsuite/gas/ppc/e500mc.d: Likewise. * testsuite/gas/ppc/e6500.d: Likewise. * testsuite/gas/ppc/htm.d: Likewise. * testsuite/gas/ppc/power6.d: Likewise. * testsuite/gas/ppc/power8.d: Likewise. * testsuite/gas/ppc/power9.d: Likewise. * testsuite/gas/ppc/vle.d: Likewise. ld/ * testsuite/ld-powerpc/tlsexe32.d: Remove trailing spaces. * testsuite/ld-powerpc/tlsopt5.d: Likewise. * testsuite/ld-powerpc/tlsopt5_32.d: Likewise.
2019-04-04Add extended mnemonics for bctar. Fix setting of 'at' branch hints.Peter Bergner2-49/+298
opcodes/ PR gas/24349 * ppc-opc.c (valid_bo_pre_v2): Add comments. (valid_bo_post_v2): Add support for 'at' branch hints. (insert_bo): Only error on branch on ctr. (get_bo_hint_mask): New function. (insert_boe): Add new 'branch_taken' formal argument. Add support for inserting 'at' branch hints. (extract_boe): Add new 'branch_taken' formal argument. Add support for extracting 'at' branch hints. (insert_bom, extract_bom, insert_bop, extract_bop): New functions. (BOE): Delete operand. (BOM, BOP): New operands. (RM): Update value. (XLYLK, XLYLK_MASK, XLYBB_MASK): Delete. (powerpc_opcodes) <bc-, bcl-, bca-, bcla-, bclr-, bclrl-, bcctr-, bcctrl-, bctar-, bctarl->: Replace BOE with BOM. (powerpc_opcodes) <bc+, bcl+, bca+, bcla+, bclr+, bclrl+, bcctr+, bcctrl+, bctar+, bctarl+>: Replace BOE with BOP. <bdnztar, bdnztarl, bdztar, bdztarl, btar, btarl, bdnztar-, bdnztarl-, bdnztar+, bdnztarl+, bdztar-, bdztarl-, bdztar+, bdztarl+, bgetar, bnltar, bgetarl, bnltarl, bletar, bngtar, bletarl, bngtarl, bnetar, bnetarl, bnstar, bnutar, bnstarl, bnutarl, bgetar-, bnltar-, bgetarl-, bnltarl-, bletar-, bngtar-, bletarl-, bngtarl-, bnetar-, bnetarl-, bnstar-, bnutar-, bnstarl-, bnutarl-, bgetar+, bnltar+, bgetarl+, bnltarl+, bletar+, bngtar+, bletarl+, bngtarl+, bnetar+, bnetarl+, bnstar+, bnutar+, bnstarl+, bnutarl+, blttar, blttarl, bgttar, bgttarl, beqtar, beqtarl, bsotar, buntar, bsotarl, buntarl, blttar-, blttarl-, bgttar-, bgttarl-, beqtar-, beqtarl-, bsotar-, buntar-, bsotarl-, buntarl-, blttar+, blttarl+, bgttar+, bgttarl+, beqtar+, beqtarl+, bsotar+, buntar+, bsotarl+, buntarl+, bdnzftar, bdnzftarl, bdzftar, bdzftarl, bftar, bftarl, bftar-, bftarl-, bftar+, bftarl+, bdnzttar, bdnzttarl, bdzttar, bdzttarl, bttar, bttarl, bttar-, bttarl-, bttar+, bttarl+>: New extended mnemonics. gas/ PR gas/24349 * testsuite/gas/ppc/power8.s: (bdnztar, bdnztarl, bdztar, bdztarl, btar, btarl, bdnztar-, bdnztarl-, bdnztar+, bdnztarl+, bdztar-, bdztarl-, bdztar+, bdztarl+, bgetar, bnltar, bgetarl, bnltarl, bletar, bngtar, bletarl, bngtarl, bnetar, bnetarl, bnstar, bnutar, bnstarl, bnutarl, bgetar-, bnltar-, bgetarl-, bnltarl-, bletar-, bngtar-, bletarl-, bngtarl-, bnetar-, bnetarl-, bnstar-, bnutar-, bnstarl-, bnutarl-, bgetar+, bnltar+, bgetarl+, bnltarl+, bletar+, bngtar+, bletarl+, bngtarl+, bnetar+, bnetarl+, bnstar+, bnutar+, bnstarl+, bnutarl+, blttar, blttarl, bgttar, bgttarl, beqtar, beqtarl, bsotar, buntar, bsotarl, buntarl, blttar-, blttarl-, bgttar-, bgttarl-, beqtar-, beqtarl-, bsotar-, buntar-, bsotarl-, buntarl-, blttar+, blttarl+, bgttar+, bgttarl+, beqtar+, beqtarl+, bsotar+, buntar+, bsotarl+, buntarl+, bdnzftar, bdnzftarl, bdzftar, bdzftarl, bftar, bftarl, bftar-, bftarl-, bftar+, bftarl+, bdnzttar, bdnzttarl, bdzttar, bdzttarl, bttar, bttarl, bttar-, bttarl-, bttar+, bttarl+): Add tests of extended mnemonics. * testsuite/gas/ppc/power8.d: Likewise. Update previous bctar tests to expect new extended mnemonics. * testsuite/gas/ppc/a2.s: <bc, bc-, bc+, bcl, bcl-, bcl+>: Update test to not use illegal BO value. Use a more convenient BI value. * testsuite/gas/ppc/a2.d: Update tests for new expect output.
2019-03-28PR24390, Don't decode mtfsb field as a cr fieldAlan Modra3-6/+20
"mtfsb0 4*cr7+lt" doesn't make all that much sense, but unfortunately glibc uses just that instead of "mtfsb0 28" to clear the fpscr xe bit. So for backwards compatibility accept cr field expressions when assembling mtfsb operands, but disassemble to a plain number. PR 24390 include/ * opcode/ppc.h (PPC_OPERAND_CR_REG): Comment. opcodes/ * ppc-opc.c (BTF): Define. (powerpc_opcodes): Use for mtfsb*. * ppc-dis.c (print_insn_powerpc): Print fields with both PPC_OPERAND_CR_REG and PPC_OPERAND_CR_BIT as a plain number. gas/ * testsuite/gas/ppc/476.d: Update mtfsb*. * testsuite/gas/ppc/a2.d: Likewise.
2019-03-25Arm: Fix Arm disassembler mapping symbol search.Tamar Christina2-148/+107
Similar to the AArch64 patches the Arm disassembler has the same issues with out of order sections but also a few short comings. For one thing there are multiple code blocks to determine mapping symbols, and they all work slightly different, and neither fully correct. The first thing this patch does is centralise the mapping symbols search into one function mapping_symbol_for_insn. This function is then updated to perform a search in a similar way as AArch64. Their used to be a value has_mapping_symbols which was used to determine the default disassembly for objects that have no mapping symbols. The problem with the approach was that it was determining this value in the same loop that needed it, which is why this field could take on the states -1, 0, 1 where -1 means "don't know". However this means that until you actually find a mapping symbol or reach the end of the disassembly glob, you don't know if you did the right action or not, and if you didn't you can't correct it anymore. This is why the two jump-reloc-veneers-* testcases end up disassembling some insn as data when they shouldn't. Out of order here refers to an object file where sections are not listed in a monotonic increasing VMA order. The ELF ABI for Arm [1] specifies the following for mapping symbols: 1) A text section must always have a corresponding mapping symbol at it's start. 2) Data sections do not require any mapping symbols. 3) The range of a mapping symbol extends from the address it starts on up to the next mapping symbol (exclusive) or section end (inclusive). However there is no defined order between a symbol and it's corresponding mapping symbol in the symbol table. This means that while in general we look up for a corresponding mapping symbol, we have to make at least one check of the symbol below the address being disassembled. When disassembling different PCs within the same section, the search for mapping symbol can be cached somewhat. We know that the mapping symbol corresponding to the current PC is either the previous one used, or one at the same address as the current PC. However this optimization and mapping symbol search must stop as soon as we reach the end or start of the section. Furthermore if we're only disassembling a part of a section, the search is a allowed to search further than the current chunk, but is not allowed to search past it (The mapping symbol if there, must be at the same address, so in practice we usually stop at PC+4). lastly, since only data sections don't require a mapping symbol the default mapping type should be DATA and not INSN as previously defined, however if the binary has had all its symbols stripped than this isn't very useful. To fix this we determine the default based on the section flags. This will allow the disassembler to be more useful on stripped binaries. If there is no section than we assume you to be disassembling INSN. [1] https://developer.arm.com/docs/ihi0044/latest/elf-for-the-arm-architecture-abi-2018q4-documentation#aaelf32-table4-7 binutils/ChangeLog: * testsuite/binutils-all/arm/in-order-all.d: New test. * testsuite/binutils-all/arm/in-order.d: New test. * testsuite/binutils-all/arm/objdump.exp: Support .d tests. * testsuite/binutils-all/arm/out-of-order-all.d: New test. * testsuite/binutils-all/arm/out-of-order.T: New test. * testsuite/binutils-all/arm/out-of-order.d: New test. * testsuite/binutils-all/arm/out-of-order.s: New test. ld/ChangeLog: * testsuite/ld-arm/jump-reloc-veneers-cond-long.d: Update disassembly. * testsuite/ld-arm/jump-reloc-veneers-long.d: Update disassembly. opcodes/ChangeLog: * arm-dis.c (struct arm_private_data): Remove has_mapping_symbols. (mapping_symbol_for_insn): Implement new algorithm. (print_insn): Remove duplicate code.
2019-03-25AArch64: Have -D override mapping symbol as documented.Tamar Christina2-1/+7
The documentation for -D says that on Arm platforms -D should disassemble data as instructions. "If the target is an ARM architecture this switch also has the effect of forcing the disassembler to decode pieces of data found in code sections as if they were instructions. " This makes it do as it says on the tincan so it's more consistent with aarch32. The usecase here is for baremetal developers who have created their instructions using .word directives instead if .insn. Though for Linux users I do find this behavior somewhat non-optimal. Perhaps there should be a new flag that just disassembles the values following the actual mapping symbol? binutils/ChangeLog: * testsuite/binutils-all/aarch64/in-order-all.d: New test. * testsuite/binutils-all/aarch64/out-of-order-all.d: New test. * testsuite/binutils-all/aarch64/out-of-order.d: opcodes/ChangeLog: * aarch64-dis.c (print_insn_aarch64): Implement override.
2019-03-25AArch64: Fix AArch64 disassembler mapping symbol searchTamar Christina2-6/+43
My previous patch for AArch64 was not enough to catch all the cases where disassembling an out-of-order section could go wrong. It had missed the case DATA sections could be incorrectly disassembled as TEXT. Out of order here refers to an object file where sections are not listed in a monotonic increasing VMA order. The ELF ABI for AArch64 [1] specifies the following for mapping symbols: 1) A text section must always have a corresponding mapping symbol at it's start. 2) Data sections do not require any mapping symbols. 3) The range of a mapping symbol extends from the address it starts on up to the next mapping symbol (exclusive) or section end (inclusive). However there is no defined order between a symbol and it's corresponding mapping symbol in the symbol table. This means that while in general we look up for a corresponding mapping symbol, we have to make at least one check of the symbol below the address being disassembled. When disassembling different PCs within the same section, the search for mapping symbol can be cached somewhat. We know that the mapping symbol corresponding to the current PC is either the previous one used, or one at the same address as the current PC. However this optimization and mapping symbol search must stop as soon as we reach the end or start of the section. Furthermore if we're only disassembling a part of a section, the search is a allowed to search further than the current chunk, but is not allowed to search past it (The mapping symbol if there, must be at the same address, so in practice we usually stop at PC+4). lastly, since only data sections don't require a mapping symbol the default mapping type should be DATA and not INSN as previously defined, however if the binary has had all its symbols stripped than this isn't very useful. To fix this we determine the default based on the section flags. This will allow the disassembler to be more useful on stripped binaries. If there is no section than we assume you to be disassembling INSN. [1] https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4#aaelf64-section4-5-4 binutils/ChangeLog: * testsuite/binutils-all/aarch64/in-order.d: New test. * testsuite/binutils-all/aarch64/out-of-order.d: Disassemble data as well. opcodes/ChangeLog: * aarch64-dis.c (print_insn_aarch64): Update the mapping symbol search order.
2019-03-25AArch64: Fix disassembler bug with out-of-order sectionsTamar Christina2-1/+11
The AArch64 disassembler has an optimization that it uses to reduce the amount it has to search for mapping symbols during disassembly. This optimization assumes that sections are listed in the section header in monotonic increasing VMAs. However this is not a requirement for the ELF specification. Because of this when such "out of order" sections occur the disassembler would pick the wrong mapping symbol to disassemble the section with. This fixes it by explicitly passing along the stop offset for the current disassembly glob and when this changes compared to the previous one we've seen the optimization won't be performed. In effect this restarts the search from a well defined starting point. Usually the symbol's address. The existing stop_vma can't be used for this as it is allowed to be unset and setting this unconditionally would change the semantics of this field. binutils/ChangeLog: * objdump.c (disassemble_bytes): Pass stop_offset. * testsuite/binutils-all/aarch64/out-of-order.T: New test. * testsuite/binutils-all/aarch64/out-of-order.d: New test. * testsuite/binutils-all/aarch64/out-of-order.s: New test. include/ChangeLog: * dis-asm.h (struct disassemble_info): Add stop_offset. opcodes/ChangeLog: * aarch64-dis.c (last_stop_offset): New. (print_insn_aarch64): Use stop_offset.
2019-03-19ix86: Disable AVX512F when disabling AVX2H.J. Lu3-7/+14
Since AVX2 is required for AVX512F, we should disable AVX512F when AVX2 is disabled. gas/ PR gas/24359 * testsuite/gas/i386/i386.exp: Change optimize-6a, optimize-7, x86-64-optimize-7a and x86-64-optimize-8 tests to run_list_test. Remove optimize-6c and x86-64-optimize-7c tests. * testsuite/gas/i386/noavx-3.l: Updated. * testsuite/gas/i386/noavx-4.d: Likewise. * testsuite/gas/i386/noavx-5.d: Likewise. * testsuite/gas/i386/noavx-3.s: Add AVX512F tests. * testsuite/gas/i386/noavx-4.s: Remove AVX512F tests. * testsuite/gas/i386/nosse-5.s: Likewise. * testsuite/gas/i386/optimize-6a.d: Removed. * testsuite/gas/i386/optimize-6c.d: Likewise. * testsuite/gas/i386/optimize-7.d: Likewise. * testsuite/gas/i386/x86-64-optimize-7a.d: Likewise. * testsuite/gas/i386/x86-64-optimize-7c.d: Likewise. * testsuite/gas/i386/x86-64-optimize-8.d: Likewise. * testsuite/gas/i386/optimize-6a.l: New file. * testsuite/gas/i386/optimize-6a.s: Likewise. * testsuite/gas/i386/optimize-7.l: Likewise. * testsuite/gas/i386/x86-64-optimize-7a.l: Likewise. * testsuite/gas/i386/x86-64-optimize-7a.s: Likewise. * testsuite/gas/i386/x86-64-optimize-8.l: Likewise. opcodes/ PR gas/24359 * i386-gen.c (cpu_flag_init): Add CPU_ANY_AVX512F_FLAGS to CPU_ANY_AVX2_FLAGS. * i386-init.h: Regenerated.
generated by cgit v1.1 at 2024-09-27 08:45:40 +0000