aboutsummaryrefslogtreecommitdiff
path: root/opcodes
AgeCommit message (Collapse)AuthorFilesLines
2011-12-15 * frv.opc (parse_uhi16): Fix handling of %hi operator on 64-bitNick Clifton3-8/+30
hosts. * cgen-asm.c (cgen_parse_signed_integer): Add code to handle the sign extension of negative values on a 64-bit host. * frv-asm.c: Regenerate. * gas/frv/immediates.s: New test file - checks assembly of constant values. * gas/frv/immediates.d: Expected disassmbly. * gas/frv/allinsn.exp: Run the new test.
2011-12-13 * ppc-opc.c (ISA_V2): Define and use for relevant BO field tests.Alan Modra3-338/+359
(valid_bo_pre_v2, valid_bo_post_v2): New functions, extracted from.. (valid_bo): ..here. When disassembling, accept either 'y' or 'at' type encoding on second pass. (powerpc_opcodes): Use ISA_V2 to enable branch insns rather than POWER4. * ppc-dis.c (print_insn_powerpc): Delete dialect_orig. Instead ignore deprecated on second pass.
2011-12-08opcodes:Andrew Pinski2-0/+5
2011-12-08 Andrew Pinski <apinski@cavium.com> * mips-opc.c (mips_builtin_opcodes): Add "pause". gas/testsuite: 2011-12-08 Andrew Pinski <apinski@cavium.com> * gas/mips/mips32-mt.d: Add pause instruction encoding to the end. * gas/mips/micromips@mips32r2.d: Likewise. * gas/mips/mips32r2.d: Likewise. * gas/mips/mips32-mt.s: Add pause instruction to the end. * gas/mips/mips32r2.s: Likewise.
2011-12-08bfd:Andrew Pinski3-7/+55
2011-12-08 Andrew Pinski <apinski@cavium.com> Adam Nemet <anemet@caviumnetworks.com> * archures.c (bfd_mach_mips_octeon2): New macro * bfd-in2.h: Regenerate. * cpu-mips.c (I_mipsocteon2): New enum value. (arch_info_struct): Add bfd_mach_mips_octeon2. * elfxx-mips.c (_bfd_elf_mips_mach): Support E_MIPS_MACH_OCTEON2. (mips_set_isa_flags): Add bfd_mach_mips_octeon2. (mips_mach_extensions): Add bfd_mach_mips_octeon2. gas: 2011-12-08 Andrew Pinski <apinski@cavium.com> Adam Nemet <anemet@caviumnetworks.com> * tc-mips.c (CPU_IS_OCTEON): Add Octeon2. (mips_cpu_info_table): Add Octeon2. * doc/c-mips.texi: Document octeon2 as an acceptable value for -march=. gas/testsuite: 2011-12-08 Andrew Pinski <apinski@cavium.com> Adam Nemet <anemet@caviumnetworks.com> * gas/mips/mips.exp: Add Octeon2 for an architecture. Run octeon2 test. * gas/mips/octeon2.d: New file. * gas/mips/octeon2.s: New file. include/opcode: 2011-12-08 Andrew Pinski <apinski@cavium.com> Adam Nemet <anemet@caviumnetworks.com> * mips.h (INSN_CHIP_MASK): Update according to INSN_OCTEON2. (INSN_OCTEON2): New macro. (CPU_OCTEON2): New macro. (OPCODE_IS_MEMBER): Add Octeon2. opcodes: 2011-12-08 Andrew Pinski <apinski@cavium.com> Adam Nemet <anemet@caviumnetworks.com> * mips-dis.c (mips_arch_choices): Add Octeon2. For "octeon+", just include OcteonP for the insn. * mips-opc.c (IOCT): Include Octeon2. (IOCTP): Include Octeon2. (IOCT2): New macro. (mips_builtin_opcodes): Add "laa", "laad", "lac", "lacd", "lad", "ladd", "lai", "laid", "las", "lasd", "law", "lawd". Move "lbux", "ldx", "lhx", "lwx", and "lwux" up to where the standard loads are, and add IOCT2 to them. Add "lbx" and "lhux". Add "qmac.00", "qmac.01", "qmac.02", "qmac.03", "qmacs.00", "qmacs.01", "qmacs.01", "qmacs.02" and "qmacs.03". Add "zcb" and "zcbt".
2011-11-29opcode/Andrew Pinski3-1/+19
2011-11-29 Andrew Pinski <apinski@cavium.com> * mips-dis.c (mips_arch_choices): Add Octeon+. * mips-opc.c (IOCT): Include Octeon+. (IOCTP): New macro. (mips_builtin_opcodes): Add "saa" and "saad". bfd/ 2011-11-29 Andrew Pinski <apinski@cavium.com> * archures.c (bfd_mach_mips_octeonp): New macro. * bfd-in2.h: Regenerate. * bfd/cpu-mips.c (I_mipsocteonp): New enum value. (arch_info_struct): Add bfd_mach_mips_octeonp. * elfxx-mips.c (mips_set_isa_flags): Add bfd_mach_mips_octeonp. (mips_mach_extensions): Add bfd_mach_mips_octeonp. include/opcodes/ 2011-11-29 Andrew Pinski <apinski@cavium.com> * mips.h (INSN_CHIP_MASK): Update according to INSN_OCTEONP. (INSN_OCTEONP): New macro. (CPU_OCTEONP): New macro. (OPCODE_IS_MEMBER): Add Octeon+. (M_SAA_AB, M_SAAD_AB, M_SAA_OB, M_SAAD_OB): New enum values. gas/ 2011-11-29 Andrew Pinski <apinski@cavium.com> * config/tc-mips.c (CPU_IS_OCTEON): New macro function. (CPU_HAS_SEQ): Change to use CPU_IS_OCTEON. (NO_ISA_COP): Likewise. (macro) <ld_st>: Add support when off0 is true. Add support for M_SAA_AB, M_SAA_OB, M_SAAD_OB and M_SAAD_AB. (mips_cpu_info_table): Add octeon+. * doc/c-mips.texi: Document octeon+ as an acceptable value for -march=. gas/testsuite/ 2011-11-29 Andrew Pinski <apinski@cavium.com> * gas/mips/mips.exp: Add octeon+ for an architecture. Run octeon-saa-saad test. (run_dump_test_arch): For Octeon architectures, also try octeon@. * gas/mips/octeon-pref.d: Remove -march=octeon from command line. * gas/mips/octeon.d: Likewise. * gas/mips/octeon-saa-saad.d: New file. * gas/mips/octeon-saa-saad.s: New file
2011-11-25 * mips-dis.c (print_insn_micromips): Rename local variable iprintfPierre Muller2-94/+99
to infprintf to avoid shadow warning.
2011-11-25 * po/it.po: Updated Italian translation.Nick Clifton2-9/+6
2011-11-16 * micromips-opc.c (micromips_opcodes): Use NODS rather than TRAPMaciej W. Rozycki2-2/+7
for "alnv.ps".
2011-11-02 * po/it.po: New Italian translation.Nick Clifton6-3/+1261
* configure.in (ALL_LINGUAS): Add it. * configure: Regenerate. * po/opcodes.pot: Regenerate.
2011-11-02[.]DJ Delorie9-0/+7358
* configure.ac (rl78-*-*) New case. * configure: Regenerate. [bfd] * Makefile.am (ALL_MACHINES): Add cpu-rl78.lo. (ALL_MACHINES_CFILES): Add cpu-rl78.c. (BFD32_BACKENDS): Add elf32-rl78.lo. (BFD32_BACKENDS_CFILES): Add elf32-rl78.c. (Makefile.in): Regenerate. * archures.c (bfd_architecture): Define bfd_arch_rl78. (bfd_archures_list): Add bfd_rl78_arch. * config.bfd: Add rl78-*-elf. * configure.in: Add bfd_elf32_rl78_vec. * reloc.c (bfd_reloc_code_type): Add BFD_RELOC_RL78_* relocations. * targets.c (bfd_target_vector): Add bfd_elf32_rl78_vec. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * cpu-rl78.c: New file. * elf32-rl78.c: New file. [binutils] * readelf.c: Include elf/rl78.h (guess_is_rela): Handle EM_RL78. (dump_relocations): Likewise. (get_machine_name): Likewise. (is_32bit_abs_reloc): Likewise. * NEWS: Mention addition of RL78 support. * MAINTAINERS: Add myself as RL78 port maintainer. [gas] * Makefile.am (TARGET_CPU_CFILES): Add tc-rl78.c. (TARGET_CPU_HFILES): Add rc-rl78.h. (EXTRA_DIST): Add rl78-parse.c and rl78-parse.y. (rl78-parse.c, rl78-parse.h, rl78-parse.o, rl78-defs.h): New rules. * Makefile.in: Regenerate. * configure.in: Add rl78 case. * configure: Regenerate. * configure.tgt: Add rl78 case. * config/rl78-defs.h: New file. * config/rl78-parse.y: New file. * config/tc-rl78.c: New file. * config/tc-rl78.h: New file. * NEWS: Add Renesas RL78. * doc/Makefile.am (c-rl78.texi): New. * doc/Makefile.in: Likewise. * doc/all.texi: Enable it. * doc/as.texi: Add it. [include] * dis-asm.h (print_insn_rl78): Declare. [include/elf] * common.h (EM_RL78, EM_78K0R): New. * rl78.h: New. [include/opcode] * rl78.h: New file. [ld] * Makefile.am (ALL_EMULATION_SOURCES): Add eelf32rl78.c. (+eelf32rl78.c): New rule. * Makefile.in: Regenerate. * configure.tgt: Add rl78-*-* case. * emulparams/elf32rl78.sh: New file. * NEWS: Mention addition of Renesas RL78 support. [opcodes] * Makefile.am (TARGET_LIBOPCODES_CFILES): Add rl78-decode.c and rl78-dis.c. (MAINTAINERCLEANFILES): Add rl78-decode.c. (rl78-decode.c): New rule, built from rl78-decode.opc and opc2c. * Makefile.in: Regenerate. * configure.in: Add bfd_rl78_arch case. * configure: Regenerate. * disassemble.c: Define ARCH_rl78. (disassembler): Add ARCH_rl78 case. * rl78-decode.c: New file. * rl78-decode.opc: New file. * rl78-dis.c: New file.
2011-10-27opcodes/Peter Bergner2-14/+21
* ppc-opc.c (powerpc_opcodes) <drrndq, drrndq., dtstexq, dctqpq, dctqpq., dctfixq, dctfixq., dxexq, dxexq., dtstsfq, dcffixq, dcffixq., diexq, diexq.>: Use FRT, FRA, FRB and FRBp repsectively on DFP quad instructions.
2011-10-26 PR binutils/13348Nick Clifton2-2/+6
* i386-dis.c (print_insn): Fix testing of array subscript.
2011-10-26cpu:Joern Rennecke3-4/+6
* epiphany.opc (parse_branch_addr): Fix type of valuep. Cast value before printing it as a long. (parse_postindex): Fix type of valuep. opcodes: * epiphany-asm.c, epiphany-opc.h: Regenerate.
2011-10-26gas:Joern Rennecke2-1/+5
* doc/as.texinfo [EPIPHANY]: Include c-epiphany.texi to avoid duplication. opcodes: * disassemble.c (ARCH_epiphany): Move into alphasorted spot.
2011-10-25bfd:Nick Clifton15-141/+10492
* Makefile.am (ALL_MACHINES): Add cpu-epiphany.lo . (ALL_MACHINES_CFILES): Add cpu-epiphany.c . (BFD32_BACKENDS): Add elf32-epiphany.lo . (BFD32_BACKENDS_CFILES): Add elf32-epiphany.c . * Makefile.in, bfd-in2.h, configure, libbfd.h: Regenerate. * archures.c (bfd_arch_epiphany): Add. (bfd_mach_epiphany16, bfd_mach_epiphany32): Define. (bfd_epiphany_arch): Declare. (bfd_archures_list): Add &bfd_epiphany_arch. * config.bfd (epiphany-*-elf): New target case. * configure.in (bfd_elf32_epiphany_vec): New target vector case. * reloc.c (BFD_RELOC_EPIPHANY_SIMM8): New relocation. (BFD_RELOC_EPIPHANY_SIMM24, BFD_RELOC_EPIPHANY_HIGH): Likewise. (BFD_RELOC_EPIPHANY_LOW, BFD_RELOC_EPIPHANY_SIMM11): Likewise. (BFD_RELOC_EPIPHANY_IMM11, BFD_RELOC_EPIPHANY_IMM8): Likewise. * targets.c (bfd_elf32_epiphany_vec): Declare. (_bfd_target_vector): Add bfd_elf32_epiphany_vec. * po/SRC-POTFILES.in, po/bfd.pot: Regenerate. * cpu-epiphany.c, elf32-epiphany.c: New files. binutils: * readelf.c (include "elf/epiphany.h") (guess_is_rela, dump_relocation): Handle EM_ADAPTEVA_EPIPHANY. (get_machine_name, is_32bit_abs_reloc, is_32bit_pcrel_reloc): Likewise. (is_16bit_abs_reloc, is_none_reloc): Likewise. * po/binutils.pot: Regenerate. cpu: * cpu/epiphany.cpu, cpu/epiphany.opc: New files. gas: * NEWS: Mention addition of Adapteva Epiphany support. * config/tc-epiphany.c, config/tc-epiphany.h: New files. * Makefile.am (TARGET_CPU_CFILES): Add config/tc-epiphany.c . (TARGET_CPU_HFILES): Add config/tc-epiphany.h . * Makefile.in, configure, doc/Makefile.in, po/POTFILES.in: Regenerate. * configure.in: Also set using_cgen for epiphany. * configure.tgt: Handle epiphany. * doc/Makefile.am (CPU_DOCS): Add c-epiphany.texi . * doc/all.texi: Set EPIPHANY. * doc/as.texinfo: Add EPIPHANY-specific text. * doc/c-epiphany.texi: New file. * po/gas.pot: Regenerate. gas/testsuite: * gas/epiphany: New directory. include: * dis-asm.h (print_insn_epiphany): Declare. * elf/epiphany.h: New file. * elf/common.h (EM_ADAPTEVA_EPIPHANY): Define. ld: * NEWS: Mention addition of Adapteva Epiphany support. * Makefile.am (ALL_EMULATION_SOURCES): Add eelf32epiphany.c . (eelf32epiphany.c): New rule. * Makefile.in: Regenerate. * configure.tgt: Handle epiphany-*-elf. * po/ld.pot: Regenerate. * testsuite/ld-srec/srec.exp: xfail epiphany. * emulparams/elf32epiphany.sh: New file. opcodes: * Makefile.am (HFILES): Add epiphany-desc.h and epiphany-opc.h . (TARGET_LIBOPCODES_CFILES): Add epiphany-asm.c, epiphany-desc.c, epiphany-dis.c, epiphany-ibld.c and epiphany-opc.c . (CLEANFILES): Add stamp-epiphany. (EPIPHANY_DEPS): Set. Make CGEN-generated Epiphany files depend on it. (stamp-epiphany): New rule. * Makefile.in, configure, po/POTFILES.in, po/opcodes.pot: Regenerate. * configure.in: Handle bfd_epiphany_arch. * disassemble.c (ARCH_epiphany): Define. (disassembler): Handle bfd_arch_epiphany. * epiphany-asm.c, epiphany-desc.c, epiphany-desc.h: New files. * epiphany-dis.c, epiphany-ibld.c, epiphany-opc.c: Likewise. * epiphany-opc.h: Likewise.
2011-10-24 opcodes/Julian Brown2-4/+8
* m68k-opc.c (m68k_opcodes): Fix entries for ColdFire moveml. gas/testsuite/ * gas/m68k/all.exp (movem-offset): Add test. * gas/m68k/movem-offset.s: New test. * gas/m68k/movem-offset.d: New.
2011-10-212011-10-21 Jan Glauber <jang@linux.vnet.ibm.com>Andreas Krebbel2-0/+15
* s390-opc.txt: Add CPUMF instructions. 2011-10-21 Andreas Krebbel <Andreas.Krebbel@de.ibm.com> * gas/s390/zarch-z10.d: Add CPUMF instructions. * gas/s390/zarch-z10.s: Likewise.
2011-10-18 Jie Zhang <jie@codesourcery.com>Julian Brown2-6/+21
Julian Brown <julian@codesourcery.com> gas/ * config/tc-arm.c (parse_shifter_operand): Fix handling of explicit rotation. (encode_arm_shifter_operand): Likewise. gas/testsuite/ * gas/arm/adrl.d: Adjust. * gas/arm/immed2.d: New test. * gas/arm/immed2.s: New test. ld/testsuite/ * ld-arm/cortex-a8-fix-b-plt.d: Adjust. * ld-arm/cortex-a8-fix-bcc-plt.d: Adjust. * ld-arm/cortex-a8-fix-bl-plt.d: Adjust. * ld-arm/cortex-a8-fix-bl-rel-plt.d: Adjust. * ld-arm/cortex-a8-fix-blx-plt.d: Adjust. * ld-arm/ifunc-1.dd: Adjust. * ld-arm/ifunc-2.dd: Adjust. * ld-arm/ifunc-3.dd: Adjust. * ld-arm/ifunc-4.dd: Adjust. * ld-arm/ifunc-5.dd: Adjust. * ld-arm/ifunc-6.dd: Adjust. * ld-arm/ifunc-7.dd: Adjust. * ld-arm/ifunc-8.dd: Adjust. * ld-arm/ifunc-9.dd: Adjust. * ld-arm/ifunc-10.dd: Adjust. * ld-arm/ifunc-14.dd: Adjust. * ld-arm/ifunc-15.dd: Adjust. * ld-arm/ifunc-16.dd: Adjust. opcodes/ * arm-dis.c (print_insn_arm): Explicitly specify rotation if needed.
2011-10-10Updated Bulgarian, Spanish, Finnish, French, Russian and Ukranian translations.Nick Clifton3-130/+136
2011-10-06gas/testsuite/Jan Beulich2-57/+135
2011-09-28 Jan Beulich <jbeulich@suse.com> * gas/ppc/476.s: Fix lswi first operand. * gas/ppc/476.d: Adjust expected output. * gas/ppc/a2.s: Fix lswi first operand. * gas/ppc/a2.d: Adjust expected output. * gas/ppc/power6.s: Fix lfdpx first operand. * gas/ppc/power6.d: Adjust expected output. opcodes/ 2011-09-28 Jan Beulich <jbeulich@suse.com> * ppc-opc.c (insert_nbi, insert_rbx, FRAp, FRBp, FRSp, FRTp, NBI, RAX, RBX): New. (insert_bo, insert_boe): Reject bcctr with bit 2 in bo unset. (powerpc_opcodes): Use RAX for second and RBXC for third operand of lswx. Use NBI for third operand of lswi. Use FRTp for first operand of lfdp and lfdpx. Use FRSp for first operand of stfdp and stfdpx, and mark them as invalid on POWER7. Use FRTp, FRAp, and FRBp repsectively on DFP quad instructions.
2011-09-27opcodes/David S. Miller2-1/+6
* sparc-opc.c (sparc_opcodes): Fix random instruction to write to a float instead of an integer register. gas/testsuite/ * gas/sparc/hpcvis3.s: Update to use float reg for random insn. * gas/sparc/hpcvis3.d: Likewise.
2011-09-26Add sparc integer multiply-add instructions.David S. Miller2-0/+7
opcodes/ * sparc-opc.c (sparc_opcodes): Add integer multiply-add instructions. gas/testsuite/ * gas/sparc/ima.d: New test. * gas/sparc/ima.s: New test source. * gas/sparc/sparc.exp: Run new test.
2011-09-21Annotate sparc objects with cpu hardware capabilities used.David S. Miller2-229/+234
bfd/ * elfxx-sparc.c (_bfd_sparc_elf_merge_private_bfd_data): New. * elfxx-sparc.h: Declare it. * elf32-sparc.c (elf32_sparc_merge_private_bfd_data): Call it. * elf64-sparc.c (elf64_sparc_merge_private_bfd_data): Likewise. binutils/ * readelf.c (display_sparc_hwcaps): New. (display_sparc_gnu_attribute): New. (process_sparc_specific): New. (process_arch_specific): When EM_SPARC, EM_SPARC32PLUS, or EM_SPARCV9 invoke process_sparc_specific. gas/ * config/tc-sparc.c (hwcap_seen): New bitmask, defined when not TE_SOLARIS. (sparc_ip): When not TE_SOLARIS, accumulate hwcap bits from sparc_opcode->flags of instruction into hwcap_seen. (sparc_md_end): Create Tag_GNU_Sparc_HWCAPS attribute if hwcap_seen is non-zero and not TE_SOLARIS. gas/testsuite/ * gas/sparc/hpcvis3.s: Update for fixed fchksum16 mnemonic. * gas/sparc/hpcvis3.d: Likewise. include/elf/ * sparc.h (Tag_GNU_Sparc_HWCAPS): New object attribute. (ELF_SPARC_HWCAP_*): New HWCAPS bitmask values. include/opcode/ * sparc.h (struct sparc_opcode): Expand 'flags' to unsigned int. (F_MUL32, F_DIV32, F_FSMULD, F_V8PLUS, F_POPC, F_VIS, F_VIS2, F_ASI_BLK_INIT, F_FMAF, F_VIS3, F_HPC, F_RANDOM, F_TRANS, F_FJFMAU, F_IMA, F_ASI_CACHE_SPARING): New flag bits. opcodes/ * sparc-opc.c (sparc_opcodes): Annotate table with HWCAP flag bits. Fix "fchksm16" mnemonic.
2011-09-10Add PR markersAndreas Schwab1-0/+1
2011-09-08opcodes/David S. Miller2-0/+4
* sparc-opc.c (sparc_opcodes): Add entry for 'save simm13,regrs1,regrd' This has been reported as being accepted by the Sun assmebler. gas/testsuite/ * gas/sparc/save-args.[sd]: New test. * gas/sparc/sparc.exp: Run new test.
2011-09-08opcodes/David S. Miller2-5/+35
The changes below bring 'mov' and 'ticc' instructions into line with the V8 SPARC Architecture Manual. * sparc-opc.c (sparc_opcodes): Add entry for 'ticc imm + regrs1'. * sparc-opc.c (sparc_opcodes): Add alias entries for 'mov regrs2,%asrX'; 'mov regrs2,%y'; 'mov regrs2,%prs'; 'mov regrs2,%wim' and 'mov regrs2,%tbr'. * sparc-opc.c (sparc_opcodes): Move/Change entries for 'mov imm,%asrX'; 'mov imm,%y'; 'mov imm,%prs'; 'mov imm,%wim' and 'mov imm,%tbr'. * sparc-opc.c (sparc_opcodes): Add wr alias entries to match above mov aliases. gas/testsuite/ * gas/sparc/ticc-imm-reg.[sd]: New test. * gas/sparc/v8-movwr-imm.[sd]: New test. * gas/sparc/sparc.exp: Run new tests.
2011-09-08opcodes/David S. Miller2-1/+5
* sparc-opc.c (pdistn): Destination is integer not float register. gas/testsuite/ * gas/sparc/hpcvis3.s: Correct pdistn test. * gas/sparc/hpcvis3.d: Likewise.
2011-09-07* gas/testsuite/gas/m68k/all.exp: Run "mode5" test also with -mcpu=5200.Andreas Schwab2-10/+9
* gas/testsuite/gas/m68k/mode5.s: Add moveml testcases. * gas/testsuite/gas/m68k/mode5.d: Update. * opcodes/m68k-opc.c: Use "y" in moveml pattern for mcfisa_a.
2011-08-26Updated Spanish translations.Nick Clifton2-163/+168
2011-08-22Move cpu files from cgen/cpu to top level cpu directory.Nick Clifton3-46/+59
2011-08-09 gas/Maciej W. Rozycki4-2/+49
* config/tc-mips.c (mips_set_options): Add ase_mcu. (mips_opts): Initialise ase_mcu to -1. (ISA_SUPPORTS_MCU_ASE): New macro. (MIPS_CPU_ASE_MCU): Likewise. (is_opcode_valid): Handle MCU. (macro_build, macro): Likewise. (validate_mips_insn, validate_micromips_insn): Likewise. (mips_ip): Likewise. (options): Add OPTION_MCU and OPTION_NO_MCU. (md_longopts): Add mmcu and mno-mcu. (md_parse_option): Handle OPTION_MCU and OPTION_NO_MCU. (mips_after_parse_args): Handle MCU. (s_mipsset): Likewise. (md_show_usage): Handle MCU options. * doc/as.texinfo: Document -mmcu and -mno-mcu options. * doc/c-mips.texi: Likewise, and document ".set mcu" and ".set nomcu" directives. gas/testsuite/ * gas/mips/micromips@mcu.d: New test. * gas/mips/mcu.d: Likewise. * gas/mips/mcu.s: New test source. * gas/mips/mips.exp: Run the new tests. include/opcode/ * mips.h (OP_MASK_3BITPOS, OP_SH_3BITPOS): New macros. (OP_MASK_OFFSET12, OP_SH_OFFSET12): Redefine. (INSN_ASE_MASK): Add the MCU bit. (INSN_MCU): New macro. (M_ACLR_AB, M_ACLR_OB, M_ASET_AB, M_ASET_OB): New enum values. (MICROMIPSOP_MASK_3BITPOS, MICROMIPSOP_SH_3BITPOS): New macros. opcodes/ * mips-dis.c (mips_arch_choices): Enable MCU for "mips32r2" and "mips64r2". (print_insn_args, print_insn_micromips): Handle MCU. * micromips-opc.c (MC): New macro. (micromips_opcodes): Add "aclr", "aset" and "iret". * mips-opc.c (MC): New macro. (mips_builtin_opcodes): Add "aclr", "aset" and "iret".
2011-08-09 include/opcode/Maciej W. Rozycki2-82/+103
* mips.h (INSN_WRITE_GPR_S, INSN2_WRITE_GPR_MB): New macros. (INSN2_READ_GPR_MC, INSN2_READ_GPR_ME): Likewise. (INSN2_WRITE_GPR_MF, INSN2_READ_GPR_MG): Likewise. (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ): Likewise. (INSN2_READ_GPR_MP, INSN2_WRITE_GPR_MP): Likewise. (INSN2_READ_GPR_MQ, INSN2_WRITE_GPR_MHI): Likewise. (INSN2_READ_GPR_MMN): Likewise. (INSN2_READ_FPR_D): Change the bit used. (INSN2_MOD_GPR_MD, INSN2_MOD_GPR_MF): Likewise. (INSN2_MOD_SP, INSN2_READ_GPR_31, INSN2_READ_GP): Likewise. (INSN2_READ_PC, INSN2_UNCOND_BRANCH): Likewise. (INSN2_COND_BRANCH): Likewise. (INSN2_WRITE_GPR_S, INSN2_MOD_GPR_MB): Remove macros. (INSN2_MOD_GPR_MC, INSN2_MOD_GPR_ME, INSN2_MOD_GPR_MG): Likewise. (INSN2_MOD_GPR_MJ, INSN2_MOD_GPR_MP, INSN2_MOD_GPR_MQ): Likewise. (INSN2_MOD_GPR_MHI, INSN2_MOD_GPR_MM): Likewise. (INSN2_MOD_GPR_MN): Likewise. gas/ * config/tc-mips.c (gpr_mod_mask): Remove INSN2_MOD_GPR_MB, INSN2_MOD_GPR_MC, INSN2_MOD_GPR_ME, INSN2_MOD_GPR_MG, INSN2_MOD_GPR_MHI, INSN2_MOD_GPR_MJ, INSN2_MOD_GPR_MM, INSN2_MOD_GPR_MN, INSN2_MOD_GPR_MP and INSN2_MOD_GPR_MQ opcode register use checks. (gpr_read_mask): Add INSN2_READ_GPR_MC, INSN2_READ_GPR_ME INSN2_READ_GPR_MG, INSN2_READ_GPR_MJ, INSN2_READ_GPR_MMN, INSN2_READ_GPR_MP and INSN2_READ_GPR_MQ opcode register use checks. (gpr_write_mask): Replace INSN2_WRITE_GPR_S opcode register use flag with INSN_WRITE_GPR_S. Add INSN2_WRITE_GPR_MB, INSN2_WRITE_GPR_MHI, INSN2_WRITE_GPR_MJ and INSN2_WRITE_GPR_MP opcode register use checks. (can_swap_branch_p): Enable microMIPS branch swapping. (append_insn): Likewise. gas/testsuite/ * gas/mips/micromips.d: Update according to changes to enable microMIPS branch swapping. * gas/mips/micromips-trap.d: Likewise. * gas/mips/micromips@jal-svr4pic.d: Likewise. * gas/mips/micromips@loc-swap.d: Likewise. * gas/mips/micromips@loc-swap-dis.d: Likewise. opcodes/ * micromips-opc.c (MOD_mb, MOD_mc, MOD_md): Remove macros. (MOD_me, MOD_mf, MOD_mg, MOD_mhi, MOD_mj, MOD_ml): Likewise. (MOD_mm, MOD_mn, MOD_mp, MOD_mq, MOD_sp): Likewise. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf): New macros. (RD_mg, WR_mhi, RD_mj, WR_mj, RD_ml, RD_mmn): Likewise. (RD_mp, WR_mp, RD_mq, RD_sp, WR_sp): Likewise. (WR_s): Update macro. (micromips_opcodes): Update register use flags of: "addiu", "addiupc", "addiur1sp", "addiur2", "addius5", "addiusp", "addu", "and", "andi", "beq", "beqz", "bne", "bnez", "di", "ei", "j", "jalr", "jalrs", "jr", "jraddiusp", "jrc", "lbu", "lhu", "li", "lui", "lw", "lwm", "mfhi", "mflo", "move", "movep", "not", "nor", "or", "ori", "sb", "sh", "sll", "srl", "subu", "sw", "swm" and "xor" instructions.
2011-08-05include/opcode/David S. Miller3-3/+113
* sparc.h: Document new format codes '4', '5', and '('. (OPF_LOW4, RS3): New macros. opcodes/ * sparc-dis.c (v9a_ast_reg_names): Add "cps". (X_RS3): New macro. (print_insn_sparc): Handle '4', '5', and '(' format codes. Accept %asr numbers below 28. * sparc-opc.c (sparc_opcodes): Add entries for HPC and VIS3 instructions. gas/ * config/tc-sparc.c (v9a_asr_table): Add "cps". (sparc_ip): Handle '4', '5' and '(' format codes. gas/testsuite * gas/sparc/hpcvis3.d: New test. * gas/sparc/hpcvis3.s: New test source. * gas/sparc/sparc.exp: Run new test.
2011-08-02opcodes/Quentin Neill2-1/+5
2011-08-02 Quentin Neill <quentin.neill@amd.com> * i386-dis.c (xop_table): Remove spurious bextr insn.
2011-08-01Check R_X86_64_32 overflow and allow R_X86_64_64 for x32.H.J. Lu2-33/+16
bfd/ 2011-08-01 H.J. Lu <hongjiu.lu@intel.com> PR ld/13048 * archures.c (bfd_mach_i386_intel_syntax): New. (bfd_mach_i386_i8086): Updated. (bfd_mach_i386_i386): Likewise. (bfd_mach_x86_64): Likewise. (bfd_mach_x64_32): Likewise. (bfd_mach_i386_i386_intel_syntax): Likewise. (bfd_mach_x86_64_intel_syntax): Likewise. (bfd_mach_x64_32_intel_syntax): Likewise. (bfd_mach_l1om): Likewise. (bfd_mach_l1om_intel_syntax): Likewise. (bfd_mach_k1om): Likewise. (bfd_mach_k1om_intel_syntax): Likewise. * bfd-in2.h: Regenerated. * cpu-i386.c (bfd_i386_compatible): Check mach instead of bits_per_address. (bfd_x64_32_arch_intel_syntax): Set bits_per_address to 64. (bfd_x64_32_arch): Likewise. * elf64-x86-64.c: Include "libiberty.h". (x86_64_elf_howto_table): Append x32 R_X86_64_32. (elf_x86_64_rtype_to_howto): Support x32 R_X86_64_32. (elf_x86_64_reloc_type_lookup): Likewise. (elf_x86_64_reloc_name_lookup): Likewise. (elf_x86_64_relocate_section): Likewise. (elf_x86_64_check_relocs): Allow R_X86_64_64 relocations for x32. gas/ 2011-08-01 H.J. Lu <hongjiu.lu@intel.com> PR ld/13048 * config/tc-i386.c (handle_quad): Removed. (md_pseudo_table): Remove "quad". (tc_gen_reloc): Don't check BFD_RELOC_64 for disallow_64bit_reloc. (x86_dwarf2_addr_size): New. * config/tc-i386.h (x86_dwarf2_addr_size): New. (DWARF2_ADDR_SIZE): Likewise. gas/testsuite/ 2011-08-01 H.J. Lu <hongjiu.lu@intel.com> PR ld/13048 * gas/i386/ilp32/ilp32.exp: Don't run inval. * gas/i386/ilp32/inval.l: Removed. * gas/i386/ilp32/inval.s: Likewise. * gas/i386/ilp32/quad.d: Expect R_X86_64_64 instead of R_X86_64_32. * gas/i386/ilp32/x86-64-pcrel.s: Add tests for movabs. * gas/i386/ilp32/x86-64-pcrel.d: Updated. ld/testsuite/ 2011-08-01 H.J. Lu <hongjiu.lu@intel.com> PR ld/13048 * ld-x86-64/ilp32-6.d: New. * ld-x86-64/ilp32-6.s: Likewise. * ld-x86-64/ilp32-7.d: Likewise. * ld-x86-64/ilp32-7.s: Likewise. * ld-x86-64/ilp32-8.d: Likewise. * ld-x86-64/ilp32-8.s: Likewise. * ld-x86-64/ilp32-9.d: Likewise. * ld-x86-64/ilp32-9.s: Likewise. * ld-x86-64/x86-64.exp: Run ilp32-6, ilp32-7, ilp32-8 and ilp32-9. opcodes/ 2011-08-01 H.J. Lu <hongjiu.lu@intel.com> PR ld/13048 * i386-dis.c (print_insn): Optimize info->mach check.
2011-08-01Add Disp32S to 64bit call.H.J. Lu3-2/+8
gas/testsuite/ 2011-08-01 H.J. Lu <hongjiu.lu@intel.com> PR gas/13046 * gas/i386/x86-64-branch.s: Add tests for direct branch. * gas/i386/x86-64-branch.d: Updated. * gas/i386/ilp32/x86-64-branch.d: Likewise. opcodes/ 2011-08-01 H.J. Lu <hongjiu.lu@intel.com> PR gas/13046 * i386-opc.tbl: Add Disp32S to 64bit call. * i386-tbl.h: Regenerated.
2011-07-24Fix misapplied patch.Richard Sandiford1-24/+25
2011-07-24bfd/Richard Sandiford7-14/+1821
2011-02-25 Chao-ying Fu <fu@mips.com> Ilie Garbacea <ilie@mips.com> Maciej W. Rozycki <macro@codesourcery.com> Joseph Myers <joseph@codesourcery.com> Catherine Moore <clm@codesourcery.com> Richard Sandiford <rdsandiford@googlemail.com> * archures.c (bfd_mach_mips_micromips): New macro. * cpu-mips.c (I_micromips): New enum value. (arch_info_struct): Add bfd_mach_mips_micromips. * elfxx-mips.h (_bfd_mips_elf_is_target_special_symbol): New prototype. (_bfd_mips_elf_relax_section): Likewise. (_bfd_mips16_elf_reloc_unshuffle): Rename to... (_bfd_mips_elf_reloc_unshuffle): ... this. Handle microMIPS ASE. (_bfd_mips16_elf_reloc_shuffle): Rename to... (_bfd_mips_elf_reloc_shuffle): ... this. Handle microMIPS ASE. (gprel16_reloc_p): Handle microMIPS ASE. (literal_reloc_p): New function. * elf32-mips.c (elf_micromips_howto_table_rel): New variable. (_bfd_mips_elf32_gprel16_reloc): Handle microMIPS ASE. (mips16_gprel_reloc): Update for _bfd_mips_elf_reloc_unshuffle and _bfd_mips_elf_reloc_shuffle changes. (mips_elf_gprel32_reloc): Update comment. (micromips_reloc_map): New variable. (bfd_elf32_bfd_reloc_type_lookup): Handle microMIPS ASE. (mips_elf32_rtype_to_howto): Likewise. (mips_info_to_howto_rel): Likewise. (bfd_elf32_bfd_is_target_special_symbol): Define. (bfd_elf32_bfd_relax_section): Likewise. * elf64-mips.c (micromips_elf64_howto_table_rel): New variable. (micromips_elf64_howto_table_rela): Likewise. (mips16_gprel_reloc): Update for _bfd_mips_elf_reloc_unshuffle and _bfd_mips_elf_reloc_shuffle changes. (micromips_reloc_map): Likewise. (bfd_elf64_bfd_reloc_type_lookup): Handle microMIPS ASE. (bfd_elf64_bfd_reloc_name_lookup): Likewise. (mips_elf64_rtype_to_howto): Likewise. (bfd_elf64_bfd_is_target_special_symbol): Define. * elfn32-mips.c (elf_micromips_howto_table_rel): New variable. (elf_micromips_howto_table_rela): Likewise. (mips16_gprel_reloc): Update for _bfd_mips_elf_reloc_unshuffle and _bfd_mips_elf_reloc_shuffle changes. (micromips_reloc_map): Likewise. (bfd_elf32_bfd_reloc_type_lookup): Handle microMIPS ASE. (bfd_elf32_bfd_reloc_name_lookup): Likewise. (mips_elf_n32_rtype_to_howto): Likewise. (bfd_elf32_bfd_is_target_special_symbol): Define. * elfxx-mips.c (LA25_LUI_MICROMIPS_1): New macro. (LA25_LUI_MICROMIPS_2): Likewise. (LA25_J_MICROMIPS_1, LA25_J_MICROMIPS_2): Likewise. (LA25_ADDIU_MICROMIPS_1, LA25_ADDIU_MICROMIPS_2): Likewise. (TLS_RELOC_P): Handle microMIPS ASE. (mips_elf_create_stub_symbol): Adjust value of stub symbol if target is a microMIPS function. (micromips_reloc_p): New function. (micromips_reloc_shuffle_p): Likewise. (got16_reloc_p, call16_reloc_p): Handle microMIPS ASE. (got_disp_reloc_p, got_page_reloc_p): New functions. (got_ofst_reloc_p): Likewise. (got_hi16_reloc_p, got_lo16_reloc_p): Likewise. (call_hi16_reloc_p, call_lo16_reloc_p): Likewise. (hi16_reloc_p, lo16_reloc_p, jal_reloc_p): Handle microMIPS ASE. (micromips_branch_reloc_p): New function. (tls_gd_reloc_p, tls_ldm_reloc_p): Likewise. (tls_gottprel_reloc_p): Likewise. (_bfd_mips16_elf_reloc_unshuffle): Rename to... (_bfd_mips_elf_reloc_unshuffle): ... this. Handle microMIPS ASE. (_bfd_mips16_elf_reloc_shuffle): Rename to... (_bfd_mips_elf_reloc_shuffle): ... this. Handle microMIPS ASE. (_bfd_mips_elf_lo16_reloc): Handle microMIPS ASE. (mips_tls_got_index, mips_elf_got_page): Likewise. (mips_elf_create_local_got_entry): Likewise. (mips_elf_relocation_needs_la25_stub): Likewise. (mips_elf_calculate_relocation): Likewise. (mips_elf_perform_relocation): Likewise. (_bfd_mips_elf_symbol_processing): Likewise. (_bfd_mips_elf_add_symbol_hook): Likewise. (_bfd_mips_elf_link_output_symbol_hook): Likewise. (mips_elf_add_lo16_rel_addend): Likewise. (_bfd_mips_elf_check_relocs): Likewise. (mips_elf_adjust_addend): Likewise. (_bfd_mips_elf_relocate_section): Likewise. (mips_elf_create_la25_stub): Likewise. (_bfd_mips_vxworks_finish_dynamic_symbol): Likewise. (_bfd_mips_elf_gc_sweep_hook): Likewise. (_bfd_mips_elf_is_target_special_symbol): New function. (mips_elf_relax_delete_bytes): Likewise. (opcode_descriptor): New structure. (RA): New macro. (OP32_SREG, OP32_TREG, OP16_VALID_REG): Likewise. (b_insns_32, bc_insn_32, bz_insn_32, bzal_insn_32): New variables. (beq_insn_32): Likewise. (b_insn_16, bz_insn_16): New variables. (BZC32_REG_FIELD): New macro. (bz_rs_insns_32, bz_rt_insns_32): New variables. (bzc_insns_32, bz_insns_16):Likewise. (BZ16_REG, BZ16_REG_FIELD): New macros. (jal_insn_32_bd16, jal_insn_32_bd32): New variables. (jal_x_insn_32_bd32): Likewise. (j_insn_32, jalr_insn_32): Likewise. (ds_insns_32_bd16, ds_insns_32_bd32): Likewise. (jalr_insn_16_bd16, jalr_insn_16_bd32, jr_insn_16): Likewise. (JR16_REG): New macro. (ds_insns_16_bd16): New variable. (lui_insn): Likewise. (addiu_insn, addiupc_insn): Likewise. (ADDIUPC_REG_FIELD): New macro. (MOVE32_RD, MOVE32_RS): Likewise. (MOVE16_RD_FIELD, MOVE16_RS_FIELD): Likewise. (move_insns_32, move_insns_16): New variables. (nop_insn_32, nop_insn_16): Likewise. (MATCH): New macro. (find_match): New function. (check_br16_dslot, check_br32_dslot): Likewise. (check_br16, check_br32): Likewise. (IS_BITSIZE): New macro. (check_4byte_branch): New function. (_bfd_mips_elf_relax_section): Likewise. (_bfd_mips_elf_merge_private_bfd_data): Disallow linking MIPS16 and microMIPS modules together. (_bfd_mips_elf_print_private_bfd_data): Handle microMIPS ASE. * reloc.c (BFD_RELOC_MICROMIPS_7_PCREL_S1): New relocation. (BFD_RELOC_MICROMIPS_10_PCREL_S1): Likewise. (BFD_RELOC_MICROMIPS_16_PCREL_S1): Likewise. (BFD_RELOC_MICROMIPS_GPREL16): Likewise. (BFD_RELOC_MICROMIPS_JMP, BFD_RELOC_MICROMIPS_HI16): Likewise. (BFD_RELOC_MICROMIPS_HI16_S): Likewise. (BFD_RELOC_MICROMIPS_LO16): Likewise. (BFD_RELOC_MICROMIPS_LITERAL): Likewise. (BFD_RELOC_MICROMIPS_GOT16): Likewise. (BFD_RELOC_MICROMIPS_CALL16): Likewise. (BFD_RELOC_MICROMIPS_GOT_HI16): Likewise. (BFD_RELOC_MICROMIPS_GOT_LO16): Likewise. (BFD_RELOC_MICROMIPS_CALL_HI16): Likewise. (BFD_RELOC_MICROMIPS_CALL_LO16): Likewise. (BFD_RELOC_MICROMIPS_SUB): Likewise. (BFD_RELOC_MICROMIPS_GOT_PAGE): Likewise. (BFD_RELOC_MICROMIPS_GOT_OFST): Likewise. (BFD_RELOC_MICROMIPS_GOT_DISP): Likewise. (BFD_RELOC_MICROMIPS_HIGHEST): Likewise. (BFD_RELOC_MICROMIPS_HIGHER): Likewise. (BFD_RELOC_MICROMIPS_SCN_DISP): Likewise. (BFD_RELOC_MICROMIPS_JALR): Likewise. (BFD_RELOC_MICROMIPS_TLS_GD): Likewise. (BFD_RELOC_MICROMIPS_TLS_LDM): Likewise. (BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16): Likewise. (BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16): Likewise. (BFD_RELOC_MICROMIPS_TLS_GOTTPREL): Likewise. (BFD_RELOC_MICROMIPS_TLS_TPREL_HI16): Likewise. (BFD_RELOC_MICROMIPS_TLS_TPREL_LO16): Likewise. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. binutils/ 2011-02-25 Chao-ying Fu <fu@mips.com> Maciej W. Rozycki <macro@codesourcery.com> * readelf.c (get_machine_flags): Handle microMIPS ASE. (get_mips_symbol_other): Likewise. gas/ 2011-02-25 Maciej W. Rozycki <macro@codesourcery.com> Chao-ying Fu <fu@mips.com> Richard Sandiford <rdsandiford@googlemail.com> * config/tc-mips.h (mips_segment_info): Add one bit for microMIPS. (TC_LABEL_IS_LOCAL): New macro. (mips_label_is_local): New prototype. * config/tc-mips.c (S0, S7): New macros. (emit_branch_likely_macro): New variable. (mips_set_options): Add micromips. (mips_opts): Initialise micromips to -1. (file_ase_micromips): New variable. (CPU_HAS_MICROMIPS): New macro. (hilo_interlocks): Set for microMIPS too. (gpr_interlocks): Likewise. (cop_interlocks): Likewise. (cop_mem_interlocks): Likewise. (HAVE_CODE_COMPRESSION): New macro. (micromips_op_hash): New variable. (micromips_nop16_insn, micromips_nop32_insn): New variables. (NOP_INSN): Handle microMIPS ASE. (mips32_to_micromips_reg_b_map): New macro. (mips32_to_micromips_reg_c_map): Likewise. (mips32_to_micromips_reg_d_map): Likewise. (mips32_to_micromips_reg_e_map): Likewise. (mips32_to_micromips_reg_f_map): Likewise. (mips32_to_micromips_reg_g_map): Likewise. (mips32_to_micromips_reg_l_map): Likewise. (mips32_to_micromips_reg_n_map): Likewise. (mips32_to_micromips_reg_h_map): New variable. (mips32_to_micromips_reg_m_map): Likewise. (mips32_to_micromips_reg_q_map): Likewise. (micromips_to_32_reg_h_map): New variable. (micromips_to_32_reg_i_map): Likewise. (micromips_to_32_reg_m_map): Likewise. (micromips_to_32_reg_q_map): Likewise. (micromips_to_32_reg_b_map): New macro. (micromips_to_32_reg_c_map): Likewise. (micromips_to_32_reg_d_map): Likewise. (micromips_to_32_reg_e_map): Likewise. (micromips_to_32_reg_f_map): Likewise. (micromips_to_32_reg_g_map): Likewise. (micromips_to_32_reg_l_map): Likewise. (micromips_to_32_reg_n_map): Likewise. (micromips_imm_b_map, micromips_imm_c_map): New macros. (RELAX_DELAY_SLOT_16BIT): New macro. (RELAX_DELAY_SLOT_SIZE_FIRST): Likewise. (RELAX_DELAY_SLOT_SIZE_SECOND): Likewise. (RELAX_MICROMIPS_ENCODE, RELAX_MICROMIPS_P): New macros. (RELAX_MICROMIPS_TYPE, RELAX_MICROMIPS_AT): Likewise. (RELAX_MICROMIPS_U16BIT, RELAX_MICROMIPS_UNCOND): Likewise. (RELAX_MICROMIPS_COMPACT, RELAX_MICROMIPS_LINK): Likewise. (RELAX_MICROMIPS_RELAX32, RELAX_MICROMIPS_TOOFAR16): Likewise. (RELAX_MICROMIPS_MARK_TOOFAR16): Likewise. (RELAX_MICROMIPS_CLEAR_TOOFAR16): Likewise. (RELAX_MICROMIPS_TOOFAR32): Likewise. (RELAX_MICROMIPS_MARK_TOOFAR32): Likewise. (RELAX_MICROMIPS_CLEAR_TOOFAR32): Likewise. (INSERT_OPERAND, EXTRACT_OPERAND): Handle microMIPS ASE. (mips_macro_warning): Add delay_slot_16bit_p, delay_slot_32bit_p, fsize and insns. (mips_mark_labels): New function. (mips16_small, mips16_ext): Remove variables, replacing with... (forced_insn_size): ... this. (append_insn, mips16_ip): Update accordingly. (micromips_insn_length): New function. (insn_length): Return the length of microMIPS instructions. (mips_record_mips16_mode): Rename to... (mips_record_compressed_mode): ... this. Handle microMIPS ASE. (install_insn): Handle microMIPS ASE. (reglist_lookup): New function. (is_size_valid, is_delay_slot_valid): Likewise. (md_begin): Handle microMIPS ASE. (md_assemble): Likewise. Update for append_insn interface change. (micromips_reloc_p): New function. (got16_reloc_p): Handle microMIPS ASE. (hi16_reloc_p): Likewise. (lo16_reloc_p): Likewise. (jmp_reloc_p): New function. (jalr_reloc_p): Likewise. (matching_lo_reloc): Handle microMIPS ASE. (insn_uses_reg, reg_needs_delay): Likewise. (mips_move_labels): Likewise. (mips16_mark_labels): Rename to... (mips_compressed_mark_labels): ... this. Handle microMIPS ASE. (gpr_mod_mask): New function. (gpr_read_mask, gpr_write_mask): Handle microMIPS ASE. (fpr_read_mask, fpr_write_mask): Likewise. (insns_between, nops_for_vr4130, nops_for_insn): Likewise. (fix_loongson2f_nop, fix_loongson2f_jump): Likewise. (MICROMIPS_LABEL_CHAR): New macro. (micromips_target_label, micromips_target_name): New variables. (micromips_label_name, micromips_label_expr): New functions. (micromips_label_inc, micromips_add_label): Likewise. (mips_label_is_local): Likewise. (micromips_map_reloc): Likewise. (can_swap_branch_p): Handle microMIPS ASE. (append_insn): Add expansionp argument. Handle microMIPS ASE. (start_noreorder, end_noreorder): Handle microMIPS ASE. (macro_start, macro_warning, macro_end): Likewise. (brk_fmt, cop12_fmt, jalr_fmt, lui_fmt): New variables. (mem12_fmt, mfhl_fmt, shft_fmt, trap_fmt): Likewise. (BRK_FMT, COP12_FMT, JALR_FMT, LUI_FMT): New macros. (MEM12_FMT, MFHL_FMT, SHFT_FMT, TRAP_FMT): Likewise. (macro_build): Handle microMIPS ASE. Update for append_insn interface change. (mips16_macro_build): Update for append_insn interface change. (macro_build_jalr): Handle microMIPS ASE. (macro_build_lui): Likewise. Simplify. (load_register): Handle microMIPS ASE. (load_address): Likewise. (move_register): Likewise. (macro_build_branch_likely): New function. (macro_build_branch_ccl): Likewise. (macro_build_branch_rs): Likewise. (macro_build_branch_rsrt): Likewise. (macro): Handle microMIPS ASE. (validate_micromips_insn): New function. (expr_const_in_range): Likewise. (mips_ip): Handle microMIPS ASE. (options): Add OPTION_MICROMIPS and OPTION_NO_MICROMIPS. (md_longopts): Add mmicromips and mno-micromips. (md_parse_option): Handle OPTION_MICROMIPS and OPTION_NO_MICROMIPS. (mips_after_parse_args): Handle microMIPS ASE. (md_pcrel_from): Handle microMIPS relocations. (mips_force_relocation): Likewise. (md_apply_fix): Likewise. (mips_align): Handle microMIPS ASE. (s_mipsset): Likewise. (s_cpload, s_cpsetup, s_cpreturn): Use relocation wrappers. (s_dtprel_internal): Likewise. (s_gpword, s_gpdword): Likewise. (s_insn): Handle microMIPS ASE. (s_mips_stab): Likewise. (relaxed_micromips_32bit_branch_length): New function. (relaxed_micromips_16bit_branch_length): New function. (md_estimate_size_before_relax): Handle microMIPS ASE. (mips_fix_adjustable): Likewise. (tc_gen_reloc): Handle microMIPS relocations. (mips_relax_frag): Handle microMIPS ASE. (md_convert_frag): Likewise. (mips_frob_file_after_relocs): Likewise. (mips_elf_final_processing): Likewise. (mips_nop_opcode): Likewise. (mips_handle_align): Likewise. (md_show_usage): Handle microMIPS options. * symbols.c (TC_LABEL_IS_LOCAL): New macro. (S_IS_LOCAL): Add a TC_LABEL_IS_LOCAL check. * doc/as.texinfo (Target MIPS options): Add -mmicromips and -mno-micromips. (-mmicromips, -mno-micromips): New options. * doc/c-mips.texi (-mmicromips, -mno-micromips): New options. (MIPS ISA): Document .set micromips and .set nomicromips. (MIPS insn): Update for microMIPS support. gas/testsuite/ 2011-02-25 Maciej W. Rozycki <macro@codesourcery.com> Chao-ying Fu <fu@mips.com> Richard Sandiford <rdsandiford@googlemail.com> * gas/mips/micromips.d: New test. * gas/mips/micromips-branch-delay.d: Likewise. * gas/mips/micromips-branch-relax.d: Likewise. * gas/mips/micromips-branch-relax-pic.d: Likewise. * gas/mips/micromips-size-1.d: Likewise. * gas/mips/micromips-trap.d: Likewise. * gas/mips/micromips.l: New stderr output. * gas/mips/micromips-branch-delay.l: Likewise. * gas/mips/micromips-branch-relax.l: Likewise. * gas/mips/micromips-branch-relax-pic.l: Likewise. * gas/mips/micromips-size-0.l: New list test. * gas/mips/micromips-size-1.l: New stderr output. * gas/mips/micromips.s: New test source. * gas/mips/micromips-branch-delay.s: Likewise. * gas/mips/micromips-branch-relax.s: Likewise. * gas/mips/micromips-size-0.s: Likewise. * gas/mips/micromips-size-1.s: Likewise. * gas/mips/mips.exp: Run the new tests. * gas/mips/dli.s: Use .p2align. * gas/mips/elf_ase_micromips.d: New test. * gas/mips/elf_ase_micromips-2.d: Likewise. * gas/mips/micromips@abs.d: Likewise. * gas/mips/micromips@add.d: Likewise. * gas/mips/micromips@alnv_ps-swap.d: Likewise. * gas/mips/micromips@and.d: Likewise. * gas/mips/micromips@beq.d: Likewise. * gas/mips/micromips@bge.d: Likewise. * gas/mips/micromips@bgeu.d: Likewise. * gas/mips/micromips@blt.d: Likewise. * gas/mips/micromips@bltu.d: Likewise. * gas/mips/micromips@branch-likely.d: Likewise. * gas/mips/micromips@branch-misc-1.d: Likewise. * gas/mips/micromips@branch-misc-2-64.d: Likewise. * gas/mips/micromips@branch-misc-2.d: Likewise. * gas/mips/micromips@branch-misc-2pic-64.d: Likewise. * gas/mips/micromips@branch-misc-2pic.d: Likewise. * gas/mips/micromips@branch-misc-4-64.d: Likewise. * gas/mips/micromips@branch-misc-4.d: Likewise. * gas/mips/micromips@branch-self.d: Likewise. * gas/mips/micromips@cache.d: Likewise. * gas/mips/micromips@daddi.d: Likewise. * gas/mips/micromips@dli.d: Likewise. * gas/mips/micromips@elf-jal.d: Likewise. * gas/mips/micromips@elf-rel2.d: Likewise. * gas/mips/micromips@elfel-rel2.d: Likewise. * gas/mips/micromips@elf-rel4.d: Likewise. * gas/mips/micromips@jal-svr4pic.d: Likewise. * gas/mips/micromips@jal-svr4pic-noreorder.d: Likewise. * gas/mips/micromips@lb-svr4pic-ilocks.d: Likewise. * gas/mips/micromips@li.d: Likewise. * gas/mips/micromips@loc-swap-dis.d: Likewise. * gas/mips/micromips@loc-swap.d: Likewise. * gas/mips/micromips@mips1-fp.d: Likewise. * gas/mips/micromips@mips32-cp2.d: Likewise. * gas/mips/micromips@mips32-imm.d: Likewise. * gas/mips/micromips@mips32-sf32.d: Likewise. * gas/mips/micromips@mips32.d: Likewise. * gas/mips/micromips@mips32r2-cp2.d: Likewise. * gas/mips/micromips@mips32r2-fp32.d: Likewise. * gas/mips/micromips@mips32r2-sync.d: Likewise. * gas/mips/micromips@mips32r2.d: Likewise. * gas/mips/micromips@mips4-branch-likely.d: Likewise. * gas/mips/micromips@mips4-fp.d: Likewise. * gas/mips/micromips@mips4.d: Likewise. * gas/mips/micromips@mips5.d: Likewise. * gas/mips/micromips@mips64-cp2.d: Likewise. * gas/mips/micromips@mips64.d: Likewise. * gas/mips/micromips@mips64r2.d: Likewise. * gas/mips/micromips@pref.d: Likewise. * gas/mips/micromips@relax-at.d: Likewise. * gas/mips/micromips@relax.d: Likewise. * gas/mips/micromips@rol-hw.d: Likewise. * gas/mips/micromips@uld2-eb.d: Likewise. * gas/mips/micromips@uld2-el.d: Likewise. * gas/mips/micromips@ulh2-eb.d: Likewise. * gas/mips/micromips@ulh2-el.d: Likewise. * gas/mips/micromips@ulw2-eb-ilocks.d: Likewise. * gas/mips/micromips@ulw2-el-ilocks.d: Likewise. * gas/mips/cache.d: Likewise. * gas/mips/daddi.d: Likewise. * gas/mips/mips32-imm.d: Likewise. * gas/mips/pref.d: Likewise. * gas/mips/elf-rel27.d: Handle microMIPS ASE. * gas/mips/l_d.d: Likewise. * gas/mips/l_d-n32.d: Likewise. * gas/mips/l_d-n64.d: Likewise. * gas/mips/ld.d: Likewise. * gas/mips/ld-n32.d: Likewise. * gas/mips/ld-n64.d: Likewise. * gas/mips/s_d.d: Likewise. * gas/mips/s_d-n32.d: Likewise. * gas/mips/s_d-n64.d: Likewise. * gas/mips/sd.d: Likewise. * gas/mips/sd-n32.d: Likewise. * gas/mips/sd-n64.d: Likewise. * gas/mips/mips32.d: Update immediates. * gas/mips/micromips@mips32-cp2.s: New test source. * gas/mips/micromips@mips32-imm.s: Likewise. * gas/mips/micromips@mips32r2-cp2.s: Likewise. * gas/mips/micromips@mips64-cp2.s: Likewise. * gas/mips/cache.s: Likewise. * gas/mips/daddi.s: Likewise. * gas/mips/mips32-imm.s: Likewise. * gas/mips/elf-rel4.s: Handle microMIPS ASE. * gas/mips/lb-pic.s: Likewise. * gas/mips/ld.s: Likewise. * gas/mips/mips32.s: Likewise. * gas/mips/mips.exp: Add the micromips arch. Exclude mips16e from micromips. Run mips32-imm. * gas/mips/jal-mask-11.d: New test. * gas/mips/jal-mask-12.d: Likewise. * gas/mips/micromips@jal-mask-11.d: Likewise. * gas/mips/jal-mask-1.s: Source for the new tests. * gas/mips/jal-mask-21.d: New test. * gas/mips/jal-mask-22.d: Likewise. * gas/mips/micromips@jal-mask-12.d: Likewise. * gas/mips/jal-mask-2.s: Source for the new tests. * gas/mips/mips.exp: Run the new tests. * gas/mips/mips16-e.d: Add --special-syms to `objdump'. * gas/mips/tmips16-e.d: Likewise. * gas/mips/mipsel16-e.d: Likewise. * gas/mips/tmipsel16-e.d: Likewise. * gas/mips/and.s: Adjust padding. * gas/mips/beq.s: Likewise. * gas/mips/bge.s: Likewise. * gas/mips/bgeu.s: Likewise. * gas/mips/blt.s: Likewise. * gas/mips/bltu.s: Likewise. * gas/mips/branch-misc-2.s: Likewise. * gas/mips/jal.s: Likewise. * gas/mips/li.s: Likewise. * gas/mips/mips4.s: Likewise. * gas/mips/mips4-fp.s: Likewise. * gas/mips/relax.s: Likewise. * gas/mips/and.d: Update accordingly. * gas/mips/elf-jal.d: Likewise. * gas/mips/jal.d: Likewise. * gas/mips/li.d: Likewise. * gas/mips/relax-at.d: Likewise. * gas/mips/relax.d: Likewise. include/elf/ 2011-02-25 Chao-ying Fu <fu@mips.com> Maciej W. Rozycki <macro@codesourcery.com> * mips.h (R_MICROMIPS_min): New relocations. (R_MICROMIPS_26_S1): Likewise. (R_MICROMIPS_HI16, R_MICROMIPS_LO16): Likewise. (R_MICROMIPS_GPREL16, R_MICROMIPS_LITERAL): Likewise. (R_MICROMIPS_GOT16, R_MICROMIPS_PC7_S1): Likewise. (R_MICROMIPS_PC10_S1, R_MICROMIPS_PC16_S1): Likewise. (R_MICROMIPS_CALL16, R_MICROMIPS_GOT_DISP): Likewise. (R_MICROMIPS_GOT_PAGE, R_MICROMIPS_GOT_OFST): Likewise. (R_MICROMIPS_GOT_HI16, R_MICROMIPS_GOT_LO16): Likewise. (R_MICROMIPS_SUB, R_MICROMIPS_HIGHER): Likewise. (R_MICROMIPS_HIGHEST, R_MICROMIPS_CALL_HI16): Likewise. (R_MICROMIPS_CALL_LO16, R_MICROMIPS_SCN_DISP): Likewise. (R_MICROMIPS_JALR, R_MICROMIPS_HI0_LO16): Likewise. (R_MICROMIPS_TLS_GD, R_MICROMIPS_TLS_LDM): Likewise. (R_MICROMIPS_TLS_DTPREL_HI, R_MICROMIPS_TLS_DTPREL_LO): Likewise. (R_MICROMIPS_TLS_GOTTPREL): Likewise. (R_MICROMIPS_TLS_TPREL_HI16): Likewise. (R_MICROMIPS_TLS_TPREL_LO16): Likewise. (R_MICROMIPS_GPREL7_S2, R_MICROMIPS_PC23_S2): Likewise. (R_MICROMIPS_max): Likewise. (EF_MIPS_ARCH_ASE_MICROMIPS): New macro. (STO_MIPS_ISA, STO_MIPS_FLAGS): Likewise. (ELF_ST_IS_MIPS_PLT, ELF_ST_SET_MIPS_PLT): Likewise. (STO_MICROMIPS): Likewise. (ELF_ST_IS_MICROMIPS, ELF_ST_SET_MICROMIPS): Likewise. (ELF_ST_IS_COMPRESSED): Likewise. (STO_MIPS_PLT, STO_MIPS_PIC): Rework. (ELF_ST_IS_MIPS_PIC, ELF_ST_SET_MIPS_PIC): Likewise. (STO_MIPS16, ELF_ST_IS_MIPS16, ELF_ST_SET_MIPS16): Likewise. include/opcode/ 2011-02-25 Chao-ying Fu <fu@mips.com> Maciej W. Rozycki <macro@codesourcery.com> * mips.h (OP_MASK_EXTLSB, OP_SH_EXTLSB): New macros. (OP_MASK_STYPE, OP_SH_STYPE): Likewise. (OP_MASK_CODE10, OP_SH_CODE10): Likewise. (OP_MASK_TRAP, OP_SH_TRAP): Likewise. (OP_MASK_OFFSET12, OP_SH_OFFSET12): Likewise. (OP_MASK_OFFSET10, OP_SH_OFFSET10): Likewise. (OP_MASK_RS3, OP_SH_RS3): Likewise. (OP_MASK_MB, OP_SH_MB, OP_MASK_MC, OP_SH_MC): Likewise. (OP_MASK_MD, OP_SH_MD, OP_MASK_ME, OP_SH_ME): Likewise. (OP_MASK_MF, OP_SH_MF, OP_MASK_MG, OP_SH_MG): Likewise. (OP_MASK_MJ, OP_SH_MJ, OP_MASK_ML, OP_SH_ML): Likewise. (OP_MASK_MP, OP_SH_MP, OP_MASK_MQ, OP_SH_MQ): Likewise. (OP_MASK_IMMA, OP_SH_IMMA, OP_MASK_IMMB, OP_SH_IMMB): Likewise. (OP_MASK_IMMC, OP_SH_IMMC, OP_MASK_IMMF, OP_SH_IMMF): Likewise. (OP_MASK_IMMG, OP_SH_IMMG, OP_MASK_IMMH, OP_SH_IMMH): Likewise. (OP_MASK_IMMI, OP_SH_IMMI, OP_MASK_IMMJ, OP_SH_IMMJ): Likewise. (OP_MASK_IMML, OP_SH_IMML, OP_MASK_IMMM, OP_SH_IMMM): Likewise. (OP_MASK_IMMN, OP_SH_IMMN, OP_MASK_IMMO, OP_SH_IMMO): Likewise. (OP_MASK_IMMP, OP_SH_IMMP, OP_MASK_IMMQ, OP_SH_IMMQ): Likewise. (OP_MASK_IMMU, OP_SH_IMMU, OP_MASK_IMMW, OP_SH_IMMW): Likewise. (OP_MASK_IMMX, OP_SH_IMMX, OP_MASK_IMMY, OP_SH_IMMY): Likewise. (INSN_WRITE_GPR_S): New macro. (INSN2_BRANCH_DELAY_16BIT, INSN2_BRANCH_DELAY_32BIT): Likewise. (INSN2_READ_FPR_D): Likewise. (INSN2_MOD_GPR_MB, INSN2_MOD_GPR_MC): Likewise. (INSN2_MOD_GPR_MD, INSN2_MOD_GPR_ME): Likewise. (INSN2_MOD_GPR_MF, INSN2_MOD_GPR_MG): Likewise. (INSN2_MOD_GPR_MJ, INSN2_MOD_GPR_MP): Likewise. (INSN2_MOD_GPR_MQ, INSN2_MOD_SP): Likewise. (INSN2_READ_GPR_31, INSN2_READ_GP, INSN2_READ_PC): Likewise. (INSN2_UNCOND_BRANCH, INSN2_COND_BRANCH): Likewise. (INSN2_MOD_GPR_MHI, INSN2_MOD_GPR_MM, INSN2_MOD_GPR_MN): Likewise. (CPU_MICROMIPS): New macro. (M_BC1FL, M_BC1TL, M_BC2FL, M_BC2TL): New enum values. (M_BEQL, M_BGEZ, M_BGEZL, M_BGEZALL, M_BGTZ, M_BGTZL): Likewise. (M_BLEZ, M_BLEZL, M_BLTZ, M_BLTZL, M_BLTZALL, M_BNEL): Likewise. (M_CACHE_OB, M_JALS_1, M_JALS_2, M_JALS_A): Likewise. (M_LDC2_OB, M_LDL_OB, M_LDM_AB, M_LDM_OB): Likewise. (M_LDP_AB, M_LDP_OB, M_LDR_OB, M_LL_OB, M_LLD_OB): Likewise. (M_LWC2_OB, M_LWL_OB, M_LWM_AB, M_LWM_OB): Likewise. (M_LWP_AB, M_LWP_OB, M_LWR_OB): Likewise. (M_LWU_OB, M_PREF_OB, M_SC_OB, M_SCD_OB): Likewise. (M_SDC2_OB, M_SDL_OB, M_SDM_AB, M_SDM_OB): Likewise. (M_SDP_AB, M_SDP_OB, M_SDR_OB): Likewise. (M_SWC2_OB, M_SWL_OB, M_SWM_AB, M_SWM_OB): Likewise. (M_SWP_AB, M_SWP_OB, M_SWR_OB): Likewise. (MICROMIPSOP_MASK_MAJOR, MICROMIPSOP_SH_MAJOR): New macros. (MICROMIPSOP_MASK_IMMEDIATE, MICROMIPSOP_SH_IMMEDIATE): Likewise. (MICROMIPSOP_MASK_DELTA, MICROMIPSOP_SH_DELTA): Likewise. (MICROMIPSOP_MASK_CODE10, MICROMIPSOP_SH_CODE10): Likewise. (MICROMIPSOP_MASK_TRAP, MICROMIPSOP_SH_TRAP): Likewise. (MICROMIPSOP_MASK_SHAMT, MICROMIPSOP_SH_SHAMT): Likewise. (MICROMIPSOP_MASK_TARGET, MICROMIPSOP_SH_TARGET): Likewise. (MICROMIPSOP_MASK_EXTLSB, MICROMIPSOP_SH_EXTLSB): Likewise. (MICROMIPSOP_MASK_EXTMSBD, MICROMIPSOP_SH_EXTMSBD): Likewise. (MICROMIPSOP_MASK_INSMSB, MICROMIPSOP_SH_INSMSB): Likewise. (MICROMIPSOP_MASK_CODE, MICROMIPSOP_SH_CODE): Likewise. (MICROMIPSOP_MASK_CODE2, MICROMIPSOP_SH_CODE2): Likewise. (MICROMIPSOP_MASK_CACHE, MICROMIPSOP_SH_CACHE): Likewise. (MICROMIPSOP_MASK_SEL, MICROMIPSOP_SH_SEL): Likewise. (MICROMIPSOP_MASK_OFFSET12, MICROMIPSOP_SH_OFFSET12): Likewise. (MICROMIPSOP_MASK_3BITPOS, MICROMIPSOP_SH_3BITPOS): Likewise. (MICROMIPSOP_MASK_STYPE, MICROMIPSOP_SH_STYPE): Likewise. (MICROMIPSOP_MASK_OFFSET10, MICROMIPSOP_SH_OFFSET10): Likewise. (MICROMIPSOP_MASK_RS, MICROMIPSOP_SH_RS): Likewise. (MICROMIPSOP_MASK_RT, MICROMIPSOP_SH_RT): Likewise. (MICROMIPSOP_MASK_RD, MICROMIPSOP_SH_RD): Likewise. (MICROMIPSOP_MASK_FS, MICROMIPSOP_SH_FS): Likewise. (MICROMIPSOP_MASK_FT, MICROMIPSOP_SH_FT): Likewise. (MICROMIPSOP_MASK_FD, MICROMIPSOP_SH_FD): Likewise. (MICROMIPSOP_MASK_FR, MICROMIPSOP_SH_FR): Likewise. (MICROMIPSOP_MASK_RS3, MICROMIPSOP_SH_RS3): Likewise. (MICROMIPSOP_MASK_PREFX, MICROMIPSOP_SH_PREFX): Likewise. (MICROMIPSOP_MASK_BCC, MICROMIPSOP_SH_BCC): Likewise. (MICROMIPSOP_MASK_CCC, MICROMIPSOP_SH_CCC): Likewise. (MICROMIPSOP_MASK_COPZ, MICROMIPSOP_SH_COPZ): Likewise. (MICROMIPSOP_MASK_MB, MICROMIPSOP_SH_MB): Likewise. (MICROMIPSOP_MASK_MC, MICROMIPSOP_SH_MC): Likewise. (MICROMIPSOP_MASK_MD, MICROMIPSOP_SH_MD): Likewise. (MICROMIPSOP_MASK_ME, MICROMIPSOP_SH_ME): Likewise. (MICROMIPSOP_MASK_MF, MICROMIPSOP_SH_MF): Likewise. (MICROMIPSOP_MASK_MG, MICROMIPSOP_SH_MG): Likewise. (MICROMIPSOP_MASK_MH, MICROMIPSOP_SH_MH): Likewise. (MICROMIPSOP_MASK_MI, MICROMIPSOP_SH_MI): Likewise. (MICROMIPSOP_MASK_MJ, MICROMIPSOP_SH_MJ): Likewise. (MICROMIPSOP_MASK_ML, MICROMIPSOP_SH_ML): Likewise. (MICROMIPSOP_MASK_MM, MICROMIPSOP_SH_MM): Likewise. (MICROMIPSOP_MASK_MN, MICROMIPSOP_SH_MN): Likewise. (MICROMIPSOP_MASK_MP, MICROMIPSOP_SH_MP): Likewise. (MICROMIPSOP_MASK_MQ, MICROMIPSOP_SH_MQ): Likewise. (MICROMIPSOP_MASK_IMMA, MICROMIPSOP_SH_IMMA): Likewise. (MICROMIPSOP_MASK_IMMB, MICROMIPSOP_SH_IMMB): Likewise. (MICROMIPSOP_MASK_IMMC, MICROMIPSOP_SH_IMMC): Likewise. (MICROMIPSOP_MASK_IMMD, MICROMIPSOP_SH_IMMD): Likewise. (MICROMIPSOP_MASK_IMME, MICROMIPSOP_SH_IMME): Likewise. (MICROMIPSOP_MASK_IMMF, MICROMIPSOP_SH_IMMF): Likewise. (MICROMIPSOP_MASK_IMMG, MICROMIPSOP_SH_IMMG): Likewise. (MICROMIPSOP_MASK_IMMH, MICROMIPSOP_SH_IMMH): Likewise. (MICROMIPSOP_MASK_IMMI, MICROMIPSOP_SH_IMMI): Likewise. (MICROMIPSOP_MASK_IMMJ, MICROMIPSOP_SH_IMMJ): Likewise. (MICROMIPSOP_MASK_IMML, MICROMIPSOP_SH_IMML): Likewise. (MICROMIPSOP_MASK_IMMM, MICROMIPSOP_SH_IMMM): Likewise. (MICROMIPSOP_MASK_IMMN, MICROMIPSOP_SH_IMMN): Likewise. (MICROMIPSOP_MASK_IMMO, MICROMIPSOP_SH_IMMO): Likewise. (MICROMIPSOP_MASK_IMMP, MICROMIPSOP_SH_IMMP): Likewise. (MICROMIPSOP_MASK_IMMQ, MICROMIPSOP_SH_IMMQ): Likewise. (MICROMIPSOP_MASK_IMMU, MICROMIPSOP_SH_IMMU): Likewise. (MICROMIPSOP_MASK_IMMW, MICROMIPSOP_SH_IMMW): Likewise. (MICROMIPSOP_MASK_IMMX, MICROMIPSOP_SH_IMMX): Likewise. (MICROMIPSOP_MASK_IMMY, MICROMIPSOP_SH_IMMY): Likewise. (MICROMIPSOP_MASK_CODE, MICROMIPSOP_SH_CODE): Likewise. (MICROMIPSOP_MASK_CODE2, MICROMIPSOP_SH_CODE2): Likewise. (MICROMIPSOP_MASK_CACHE, MICROMIPSOP_SH_CACHE): Likewise. (MICROMIPSOP_MASK_CODE20, MICROMIPSOP_SH_CODE20): Likewise. (MICROMIPSOP_MASK_PERFREG, MICROMIPSOP_SH_PERFREG): Likewise. (MICROMIPSOP_MASK_CODE19, MICROMIPSOP_SH_CODE19): Likewise. (MICROMIPSOP_MASK_ALN, MICROMIPSOP_SH_ALN): Likewise. (MICROMIPSOP_MASK_VECBYTE, MICROMIPSOP_SH_VECBYTE): Likewise. (MICROMIPSOP_MASK_VECALIGN, MICROMIPSOP_SH_VECALIGN): Likewise. (MICROMIPSOP_MASK_DSPACC, MICROMIPSOP_SH_DSPACC): Likewise. (MICROMIPSOP_MASK_DSPACC_S, MICROMIPSOP_SH_DSPACC_S): Likewise. (MICROMIPSOP_MASK_DSPSFT, MICROMIPSOP_SH_DSPSFT): Likewise. (MICROMIPSOP_MASK_DSPSFT_7, MICROMIPSOP_SH_DSPSFT_7): Likewise. (MICROMIPSOP_MASK_SA3, MICROMIPSOP_SH_SA3): Likewise. (MICROMIPSOP_MASK_SA4, MICROMIPSOP_SH_SA4): Likewise. (MICROMIPSOP_MASK_IMM8, MICROMIPSOP_SH_IMM8): Likewise. (MICROMIPSOP_MASK_IMM10, MICROMIPSOP_SH_IMM10): Likewise. (MICROMIPSOP_MASK_WRDSP, MICROMIPSOP_SH_WRDSP): Likewise. (MICROMIPSOP_MASK_RDDSP, MICROMIPSOP_SH_RDDSP): Likewise. (MICROMIPSOP_MASK_BP, MICROMIPSOP_SH_BP): Likewise. (MICROMIPSOP_MASK_MT_U, MICROMIPSOP_SH_MT_U): Likewise. (MICROMIPSOP_MASK_MT_H, MICROMIPSOP_SH_MT_H): Likewise. (MICROMIPSOP_MASK_MTACC_T, MICROMIPSOP_SH_MTACC_T): Likewise. (MICROMIPSOP_MASK_MTACC_D, MICROMIPSOP_SH_MTACC_D): Likewise. (MICROMIPSOP_MASK_BBITIND, MICROMIPSOP_SH_BBITIND): Likewise. (MICROMIPSOP_MASK_CINSPOS, MICROMIPSOP_SH_CINSPOS): Likewise. (MICROMIPSOP_MASK_CINSLM1, MICROMIPSOP_SH_CINSLM1): Likewise. (MICROMIPSOP_MASK_SEQI, MICROMIPSOP_SH_SEQI): Likewise. (micromips_opcodes): New declaration. (bfd_micromips_num_opcodes): Likewise. ld/testsuite/ 2011-02-25 Catherine Moore <clm@codesourcery.com> Chao-ying Fu <fu@mips.com> Maciej W. Rozycki <macro@codesourcery.com> * lib/ld-lib.exp (run_dump_test): Support distinct assembler flags for the same source named multiple times. * ld-mips-elf/jalx-1.s: New test source. * ld-mips-elf/jalx-1.d: New test output. * ld-mips-elf/jalx-1.ld: New test linker script. * ld-mips-elf/jalx-2-main.s: New test source. * ld-mips-elf/jalx-2-ex.s: Likewise. * ld-mips-elf/jalx-2-printf.s: Likewise. * ld-mips-elf/jalx-2.dd: New test output. * ld-mips-elf/jalx-2.ld: New test linker script. * ld-mips-elf/mips16-and-micromips.d: New test. * ld-mips-elf/mips-elf.exp: Run the new tests opcodes/ 2011-02-25 Chao-ying Fu <fu@mips.com> Maciej W. Rozycki <macro@codesourcery.com> * micromips-opc.c: New file. * mips-dis.c (micromips_to_32_reg_b_map): New array. (micromips_to_32_reg_c_map, micromips_to_32_reg_d_map): Likewise. (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map): Likewise. (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map): Likewise. (micromips_to_32_reg_q_map): Likewise. (micromips_imm_b_map, micromips_imm_c_map): Likewise. (micromips_ase): New variable. (is_micromips): New function. (set_default_mips_dis_options): Handle microMIPS ASE. (print_insn_micromips): New function. (is_compressed_mode_p): Likewise. (_print_insn_mips): Handle microMIPS instructions. * Makefile.am (CFILES): Add micromips-opc.c. * configure.in (bfd_mips_arch): Add micromips-opc.lo. * Makefile.in: Regenerate. * configure: Regenerate. * mips-dis.c (micromips_to_32_reg_h_map): New variable. (micromips_to_32_reg_i_map): Likewise. (micromips_to_32_reg_m_map): Likewise. (micromips_to_32_reg_n_map): New macro.
2011-07-24include/opcode/Richard Sandiford3-31/+47
2011-07-24 Maciej W. Rozycki <macro@codesourcery.com> * mips.h (INSN_TRAP): Rename to... (INSN_NO_DELAY_SLOT): ... this. (INSN_SYNC): Remove macro. gas/ 2011-07-24 Maciej W. Rozycki <macro@codesourcery.com> * config/tc-mips.c (can_swap_branch_p): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT. Remove the check for INSN_SYNC as well as explicit checks for ERET and DERET when scheduling branch delay slots. opcodes/ 2011-07-24 Maciej W. Rozycki <macro@codesourcery.com> * mips-opc.c (NODS): New macro. (TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT. (DSP_VOLA): Likewise. (mips_builtin_opcodes): Add NODS annotation to "deret" and "eret". Replace INSN_SYNC with NODS throughout. Use NODS in place of TRAP for "wait", "waiti" and "yield". * mips16-opc.c (NODS): New macro. (TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT. (mips16_opcodes): Use NODS in place of TRAP for "jalrc", "jrc", "restore" and "save".
2011-07-22Add initial Intel K1OM support.H.J. Lu9-3114/+3151
bfd/ 2011-07-22 H.J. Lu <hongjiu.lu@intel.com> * Makefile.am (ALL_MACHINES): Add cpu-k1om.lo. (ALL_MACHINES_CFILES): Add cpu-k1om.c. * Makefile.in: Regenerated. * archures.c (bfd_architecture): Add bfd_arch_k1om. (bfd_k1om_arch): New. (bfd_archures_list): Add &bfd_k1om_arch. * bfd-in2.h: Regenerated. * config.bfd (targ64_selvecs): Add bfd_elf64_k1om_vec if bfd_elf64_x86_64_vec is supported. Add bfd_elf64_k1om_freebsd_vec if bfd_elf64_x86_64_freebsd_vec is supported. (targ_selvecs): Likewise. * configure.in: Support bfd_elf64_k1om_vec and bfd_elf64_k1om_freebsd_vec. * configure: Regenerated. * cpu-k1om.c: New. * elf64-x86-64.c (elf64_k1om_elf_object_p): New. (bfd_elf64_k1om_vec): Likewise. (bfd_elf64_k1om_freebsd_vec): Likewise. * targets.c (bfd_elf64_k1om_vec): New. (bfd_elf64_k1om_freebsd_vec): Likewise. (_bfd_target_vector): Add bfd_elf64_k1om_vec and bfd_elf64_k1om_freebsd_vec. binutils/ 2011-07-22 H.J. Lu <hongjiu.lu@intel.com> * dwarf.c (init_dwarf_regnames): Handle EM_K1OM. * elfedit.c (elf_machine): Support EM_K1OM. (elf_class): Likewise. * readelf.c (guess_is_rela): Handle EM_K1OM. (dump_relocations): Likewise. (get_machine_name): Likewise. (get_section_type_name): Likewise. (get_elf_section_flags): Likewise. (process_section_headers): Likewise. (get_symbol_index_type): Likewise. (is_32bit_abs_reloc): Likewise. (is_32bit_pcrel_reloc): Likewise. (is_64bit_abs_reloc): Likewise. (is_64bit_pcrel_reloc): Likewise. (is_none_reloc): Likewise. * doc/binutils.texi: Mention K1OM for elfedit. binutils/testsuite/ 2011-07-22 H.J. Lu <hongjiu.lu@intel.com> * binutils-all/elfedit.exp: Run elfedit-4. * binutils-all/elfedit-4.d: New. gas/ 2011-07-22 H.J. Lu <hongjiu.lu@intel.com> * config/tc-i386.c (cpu_arch): Add k1om. (i386_align_code): Handle PROCESSOR_K1OM. (check_cpu_arch_compatible): Check EM_K1OM. (i386_arch): Handle Intel K1OM. (i386_mach): Return bfd_mach_k1om for Intel K1OM. (i386_target_format): Return ELF_TARGET_K1OM_FORMAT for Intel K1OM. * config/tc-i386.h (ELF_TARGET_K1OM_FORMAT): New. (processor_type): Add PROCESSOR_K1OM. * doc/c-i386.texi: Document k1om. gas/testsuite/ 2011-07-22 H.J. Lu <hongjiu.lu@intel.com> * gas/i386/k1om.d: New. * gas/i386/k1om-inval.l: Likewise. * gas/i386/k1om-inval.s: Likewise. * gas/i386/i386.exp: Run k1om-inval and k1om. include/elf/ 2011-07-22 H.J. Lu <hongjiu.lu@intel.com> * common.h (EM_K1OM): New. ld/ 2011-07-22 H.J. Lu <hongjiu.lu@intel.com> * Makefile.am (ALL_64_EMULATIONS): Add eelf_k1om.o and eelf_k1om_fbsd.o (eelf_k1om.c): New. (eelf_k1om_fbsd.c): Likewise. * Makefile.in: Regenerated. * configure.tgt (targ64_extra_emuls): Add elf_k1om if elf_x86_64 is supported. Add elf_k1om_fbsd if elf_x86_64_fbsd is supported. (targ_extra_emuls): Likewise. * emulparams/elf_k1om.sh: New. * emulparams/elf_k1om_fbsd.sh: Likewise. ld/testsuite/ 2011-07-22 H.J. Lu <hongjiu.lu@intel.com> * ld-x86-64/abs-k1om.d: New. * ld-x86-64/protected2-k1om.d: Likewise. * ld-x86-64/protected3-k1om.d: Likewise. * ld-x86-64/x86-64.exp: Run abs-k1om, protected2-k1om and protected3-k1om. opcodes/ 2011-07-22 H.J. Lu <hongjiu.lu@intel.com> * configure.in: Handle bfd_k1om_arch. * configure: Regenerated. * disassemble.c (disassembler): Handle bfd_k1om_arch. * i386-dis.c (print_insn): Handle bfd_mach_k1om and bfd_mach_k1om_intel_syntax. * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~(CpuL1OM|CpuK1OM). Add CPU_K1OM_FLAGS. (cpu_flags): Add CpuK1OM. * i386-opc.h (CpuK1OM): New. (i386_cpu_flags): Add cpuk1om. * i386-init.h: Regenerated. * i386-tbl.h: Likewise.
2011-07-12 * arm-dis.c (print_insn_arm): Revert previous, undocumented,Nick Clifton2-3/+5
accidental change.
2011-07-01 PR binutils/12329Nick Clifton3-1/+11
* avr-dis.c (avr_operand): Fix disassembly of ELPM, LPM and SPM insns using post-increment addressing. * avr.h (AVR_ISA_AVR6): Fix typo, adding AVR_ISA_SPMX.
2011-07-01Update rorxS.H.J. Lu2-1/+5
2011-06-30 H.J. Lu <hongjiu.lu@intel.com> * i386-dis.c (vex_len_table): Update rorxS.
2011-06-30Fix rorx in BMI2.H.J. Lu4-7/+12
gas/testsuite/ 2011-06-30 H.J. Lu <hongjiu.lu@intel.com> AVX Programming Reference (June, 2011) * gas/i386/bmi2.s: Correct rorx tests. * gas/i386/x86-64-bmi2.s: Likewise. * gas/i386/bmi2-intel.d: Updated. * gas/i386/bmi2.d: Likewise. * gas/i386/x86-64-bmi2-intel.d: Likewise. * gas/i386/x86-64-bmi2.d: Likewise. opcodes/ 2011-06-30 H.J. Lu <hongjiu.lu@intel.com> AVX Programming Reference (June, 2011) * i386-dis.c (vex_len_table): Correct rorxS. * i386-opc.tbl: Correct rorx. * i386-tbl.h: Regenerated.
2011-06-29Replace "index" with "i".H.J. Lu3-8/+13
2011-06-29 H.J. Lu <hongjiu.lu@intel.com> * tilegx-opc.c (find_opcode): Replace "index" with "i". * tilepro-opc.c (find_opcode): Likewise.
2011-06-29gas/Richard Sandiford2-4/+11
* config/tc-mips.c (find_altered_mips16_opcode): New function. (append_insn): Use it. opcodes/ * mips16-opc.c (jalrc, jrc): Move earlier in file.
2011-06-21Re-indent prefix_table.H.J. Lu2-2/+7
2011-06-21 H.J. Lu <hongjiu.lu@intel.com> * i386-dis.c (prefix_table): Re-indent PREFIX_VEX_0F388C and PREFIX_VEX_0F388E.
2011-06-17* Makefile.am (MAINTAINERCLEANFILES): Move s390-opc.tab ...Andreas Schwab3-5/+11
(MOSTLYCLEANFILES): ... here. * Makefile.in: Regenerate.
2011-06-14 * Makefile.in: Regenerate.Alan Modra2-0/+6
2011-06-13 * Makefile.am (ALL_MACHINES): Add cpu-tilegx.lo and cpu-tilepro.lo.Nick Clifton11-1/+18650
(ALL_MACHINE_CFILES): Add cpu-tilegx.c and cpu-tilepro.c. (BFD32_BACKENDS): Add elf32-tilegx.lo, elf32-tilepro.lo, and elfxx-tilegx.lo. (BFD32_BACKENDS_CFILES): Add elf32-tilegx.c elf32-tilepro.c, and elfxx-tilegx.c. (BFD64_BACKENDS): Add elf64-tilegx.lo. (BFD64_BACKENDS_CFILES): Add elf64-tilegx.c. * Makefile.in: Regenerate. * arctures.c (bfd_architecture): Define bfd_arch_tilepro, bfd_arch_tilegx, bfd_mach_tilepro, bfd_mach_tilegx. (bfd_arch_info): Add bfd_tilegx_arch, bfd_tilepro_arch. (bfd_archures_list): Add bfd_tilegx_arch, bfd_tilepro_arch. bfd-in2.h: Regenerate. * config.bfd: Handle tilegx-*-* and tilepro-*-*. * configure.in: Handle bfd_elf32_tilegx_vec, bfd_elf32_tilepro_vec, and bfd_elf64_tilegx_vec. * configure: Regenerate. * elf-bfd.h (enum elf_target_id): Define TILEGX_ELF_DATA and TILEPRO_ELF_DATA. * libbfd.h: Regenerate. * reloc.c: Add BFD_RELOC_TILEPRO_{COPY, GLOB_DAT, JMP_SLOT, RELATIVE, BROFF_X1, JOFFLONG_X1, JOFFLONG_X1_PLT, IMM8_X0, IMM8_Y0, IMM8_X1, IMM8_Y1, DEST_IMM8_X1, MT_IMM15_X1, MF_IMM15_X1, IMM16_X0, IMM16_X1, IMM16_X0_LO, IMM16_X1_LO, IMM16_X0_HI, IMM16_X1_HI, IMM16_X0_HA, IMM16_X1_HA, IMM16_X0_PCREL, IMM16_X1_PCREL, IMM16_X0_LO_PCREL, IMM16_X1_LO_PCREL, IMM16_X0_HI_PCREL, IMM16_X1_HI_PCREL, IMM16_X0_HA_PCREL, IMM16_X1_HA_PCREL, IMM16_X0_GOT, IMM16_X1_GOT, IMM16_X0_GOT_LO, IMM16_X1_GOT_LO, IMM16_X0_GOT_HI, IMM16_X1_GOT_HI, IMM16_X0_GOT_HA, IMM16_X1_GOT_HA, MMSTART_X0, MMEND_X0, MMSTART_X1, MMEND_X1, SHAMT_X0, SHAMT_X1, SHAMT_Y0, SHAMT_Y1, IMM16_X0_TLS_GD, IMM16_X1_TLS_GD, IMM16_X0_TLS_GD_LO, IMM16_X1_TLS_GD_LO, IMM16_X0_TLS_GD_HI, IMM16_X1_TLS_GD_HI, IMM16_X0_TLS_GD_HA, IMM16_X1_TLS_GD_HA, IMM16_X0_TLS_IE, IMM16_X1_TLS_IE, IMM16_X0_TLS_IE_LO, IMM16_X1_TLS_IE_LO, IMM16_X0_TLS_IE_HI, IMM16_X1_TLS_IE_HI, IMM16_X0_TLS_IE_HA, IMM16_X1_TLS_IE_HA, TLS_DTPMOD32, TLS_DTPOFF32, TLS_TPOFF32} Add BFD_RELOC_TILEGX_{HW0, HW1, HW2, HW3, HW0_LAST, HW1_LAST, HW2_LAST, COPY, GLOB_DAT, JMP_SLOT, RELATIVE, BROFF_X1, JUMPOFF_X1, JUMPOFF_X1_PLT, IMM8_X0, IMM8_Y0, IMM8_X1, IMM8_Y1, DEST_IMM8_X1, MT_IMM14_X1, MF_IMM14_X1, MMSTART_X0, MMEND_X0, SHAMT_X0, SHAMT_X1, SHAMT_Y0, SHAMT_Y1, IMM16_X0_HW0, IMM16_X1_HW0, IMM16_X0_HW1, IMM16_X1_HW1, IMM16_X0_HW2, IMM16_X1_HW2, IMM16_X0_HW3, IMM16_X1_HW3, IMM16_X0_HW0_LAST, IMM16_X1_HW0_LAST, IMM16_X0_HW1_LAST, IMM16_X1_HW1_LAST, IMM16_X0_HW2_LAST, IMM16_X1_HW2_LAST, IMM16_X0_HW0_PCREL, IMM16_X1_HW0_PCREL, IMM16_X0_HW1_PCREL, IMM16_X1_HW1_PCREL, IMM16_X0_HW2_PCREL, IMM16_X1_HW2_PCREL, IMM16_X0_HW3_PCREL, IMM16_X1_HW3_PCREL, IMM16_X0_HW0_LAST_PCREL, IMM16_X1_HW0_LAST_PCREL, IMM16_X0_HW1_LAST_PCREL, IMM16_X1_HW1_LAST_PCREL, IMM16_X0_HW2_LAST_PCREL, IMM16_X1_HW2_LAST_PCREL, IMM16_X0_HW0_GOT, IMM16_X1_HW0_GOT, IMM16_X0_HW1_GOT, IMM16_X1_HW1_GOT, IMM16_X0_HW2_GOT, IMM16_X1_HW2_GOT, IMM16_X0_HW3_GOT, IMM16_X1_HW3_GOT, IMM16_X0_HW0_LAST_GOT, IMM16_X1_HW0_LAST_GOT, IMM16_X0_HW1_LAST_GOT, IMM16_X1_HW1_LAST_GOT, IMM16_X0_HW2_LAST_GOT, IMM16_X1_HW2_LAST_GOT, IMM16_X0_HW0_TLS_GD, IMM16_X1_HW0_TLS_GD, IMM16_X0_HW1_TLS_GD, IMM16_X1_HW1_TLS_GD, IMM16_X0_HW2_TLS_GD, IMM16_X1_HW2_TLS_GD, IMM16_X0_HW3_TLS_GD, IMM16_X1_HW3_TLS_GD, IMM16_X0_HW0_LAST_TLS_GD, IMM16_X1_HW0_LAST_TLS_GD, IMM16_X0_HW1_LAST_TLS_GD, IMM16_X1_HW1_LAST_TLS_GD, IMM16_X0_HW2_LAST_TLS_GD, IMM16_X1_HW2_LAST_TLS_GD, IMM16_X0_HW0_TLS_IE, IMM16_X1_HW0_TLS_IE, IMM16_X0_HW1_TLS_IE, IMM16_X1_HW1_TLS_IE, IMM16_X0_HW2_TLS_IE, IMM16_X1_HW2_TLS_IE, IMM16_X0_HW3_TLS_IE, IMM16_X1_HW3_TLS_IE, IMM16_X0_HW0_LAST_TLS_IE, IMM16_X1_HW0_LAST_TLS_IE, IMM16_X0_HW1_LAST_TLS_IE, IMM16_X1_HW1_LAST_TLS_IE, IMM16_X0_HW2_LAST_TLS_IE, IMM16_X1_HW2_LAST_TLS_IE, TLS_DTPMOD64, TLS_DTPOFF64, TLS_TPOFF64, TLS_DTPMOD32, TLS_DTPOFF32, TLS_TPOFF32} * targets.c (bfd_elf32_tilegx_vec): Declare. (bfd_elf32_tilepro_vec): Declare. (bfd_elf64_tilegx_vec): Declare. (bfd_target_vector): Add bfd_elf32_tilegx_vec, bfd_elf32_tilepro_vec, and bfd_elf64_tilegx_vec. * cpu-tilegx.c: New file. * cpu-tilepro.c: New file. * elf32-tilepro.h: New file. * elf32-tilepro.c: New file. * elf32-tilegx.c: New file. * elf32-tilegx.h: New file. * elf64-tilegx.c: New file. * elf64-tilegx.h: New file. * elfxx-tilegx.c: New file. * elfxx-tilegx.h: New file. * Makefile.am (TARGET_CPU_CFILES): Add config/tc-tilegx.c and config/tc-tilepro.c. (TARGET_CPU_HFILES): Add config/tc-tilegx.h and config/tc-tilepro.h. * Makefile.in: Regenerate. * configure.tgt (tilepro-*-*): New. (tilegx-*-*): Likewise. * config/tc-tilegx.c: New file. * config/tc-tilegx.h: Likewise. * config/tc-tilepro.h: Likewise. * config/tc-tilepro.c: Likewise. * doc/Makefile.am (CPU_DOCS): Add c-tilegx.texi and c-tilepro.texi. * doc/Makefile.in: Regenerate. * doc/all.texi (TILEGX): Define. (TILEPRO): Define. * doc/as.texinfo: Add Tile-Gx and TILEPro documentation. Include c-tilegx.texi and c-tilepro.texi. * doc/c-tilegx.texi: New. * doc/c-tilepro.texi: New. * gas/tilepro/t_constants.s: New file. * gas/tilepro/t_constants.d: Likewise. * gas/tilepro/t_insns.s: Likewise. * gas/tilepro/tilepro.exp: Likewise. * gas/tilepro/t_insns.d: Likewise. * gas/tilegx/tilegx.exp: Likewise. * gas/tilegx/t_insns.d: Likewise. * gas/tilegx/t_insns.s: Likewise. * dis-asm.h (print_insn_tilegx): Declare. (print_insn_tilepro): Likewise. * tilegx.h: New file. * tilepro.h: New file. * common.h: Add EM_TILEGX. * tilegx.h: New file. * tilepro.h: New file. * Makefile.am (ALL_EMULATION_SOURCES): Add eelf32tilegx.c and eelf32tilepro.c. (ALL_64_EMULATION_SOURCES): Add eelf64tilegx.c. (eelf32tilegx.c): New target. (eelf32tilepro.c): Likewise. (eelf64tilegx.c): Likewise. * Makefile.in: Regenerate. * configure.tgt: Handle tilegx-*-* and tilepro-*-*. * emulparams/elf32tilegx.sh: New file. * emulparams/elf64tilegx.sh: New file. * emulparams/elf32tilepro.sh: New file. * ld-elf/eh5.d: Don't run on tile*. * ld-srec/srec.exp: xfail on tile*. * ld-tilegx/external.s: New file. * ld-tilegx/reloc.d: New file. * ld-tilegx/reloc.s: New file. * ld-tilegx/tilegx.exp: New file. * ld-tilepro/external.s: New file. * ld-tilepro/reloc.d: New file. * ld-tilepro/reloc.s: New file. * ld-tilepro/tilepro.exp: New file. * Makefile.am (TARGET_LIBOPCODES_CFILES): Add tilegx-dis.c, tilegx-opc.c, tilepro-dis.c, and tilepro-opc.c. * Makefile.in: Regenerate. * configure.in: Handle bfd_tilegx_arch and bfd_tilepro_arch. * configure: Regenerate. * disassemble.c (disassembler): Add ARCH_tilegx and ARCH_tilepro. * po/POTFILES.in: Regenerate. * tilegx-dis.c: New file. * tilegx-opc.c: New file. * tilepro-dis.c: New file. * tilepro-opc.c: New file.