aboutsummaryrefslogtreecommitdiff
path: root/opcodes
AgeCommit message (Collapse)AuthorFilesLines
2013-09-022013-09-02 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>Andreas Krebbel2-3/+9
* s390-opc.txt: Fix description for fiebra, fidbra, and fixbra. For the load fp integer instructions only the suppression flag was new with z196 version.
2013-08-28 * aarch64-opc.c (aarch64_logical_immediate_p): Return FALSE if theNick Clifton2-1/+7
immediate is not suitable for the 32-bit ABI. * gas/aarch64/illegal.s: Add illegal constant for logical operation. * gas/aarch64/illegal.l: Add expected error message.
2013-08-23 opcodes/Maciej W. Rozycki2-3/+6
* micromips-opc.c (micromips_opcodes): Use RD_4 for "alnv.ps", replacing NODS. gas/testsuite/ * gas/testsuite/gas/mips/micromips-insn32.d: Adjust for delay slot scheduling of ALNV.PS. * gas/testsuite/gas/mips/micromips-noinsn32.d: Likewise. * gas/testsuite/gas/mips/micromips-trap.d: Likewise. * gas/testsuite/gas/mips/micromips.d: Likewise. * gas/testsuite/gas/mips/micromips@alnv_ps-swap.d: Likewise.
2013-08-23 PR binutils/15834Nick Clifton4-5/+12
Fix typos: --- bfd/bfdio.c | 2 +- bfd/elf32-spu.c | 2 +- bfd/elfnn-aarch64.c | 2 +- binutils/od-xcoff.c | 2 +- config/tcl.m4 | 2 +- gas/config/tc-ia64.c | 2 +- gas/config/tc-sparc.c | 2 +- gas/config/tc-z80.c | 12 ++++++------ gas/doc/c-i386.texi | 6 +++--- gas/doc/c-m32r.texi | 2 +- gas/testsuite/gas/d10v/instruction_packing.d | 2 +- gas/testsuite/gas/z80/atend.d | 2 +- gold/object.h | 2 +- include/gdb/remote-sim.h | 2 +- include/opcode/ChangeLog | 2 +- include/opcode/i960.h | 2 +- ld/testsuite/ld-mips-elf/mips16-pic-1.inc | 2 +- opcodes/aarch64-asm.c | 2 +- opcodes/aarch64-dis.c | 2 +- opcodes/msp430-dis.c | 2 +-
2013-08-19include/opcode/Richard Sandiford3-6/+17
* mips.h (M_DEXT, M_DINS): Delete. opcodes/ * micromips-opc.c (micromips_opcodes): Replace "dext" and "dins" macro entries with "dextm", "dextu", "dinsm" and "dinsu" aliases. Use +H rather than +C for the real "dext". * mips-opc.c (mips_builtin_opcodes): Likewise. gas/ * config/tc-mips.c (report_bad_range, report_bad_field): Delete. (macro): Remove M_DEXT and M_DINS handling. gas/testsuite/ * gas/mips/ext-ill.l, gas/mips/mips64r2-ill.l: Expect DEXT and DINS error messages to have the same form as the EXT and INS ones. * gas/mips/micromips-insn32.d, gas/mips/micromips-noinsn32.d, gas/mips/micromips-trap.d, gas/mips/micromips.d, gas/mips/micromips@mips64r2.d, gas/mips/mips64r2.d: Expect "dext" and "dins" instead of "dextm", "dextu", "dinsm" and "dinsu".
2013-08-19include/opcode/Richard Sandiford6-13/+41
* mips.h (OP_OPTIONAL_REG): New mips_operand_type. (mips_optional_operand_p): New function. opcodes/ * mips-formats.h (OPTIONAL_REG, OPTIONAL_MAPPED_REG): New macros. * micromips-opc.c (decode_micromips_operand): Use OPTIONAL_REG and OPTIONAL_MAPPED_REG. * mips-opc.c (decode_mips_operand): Likewise. * mips16-opc.c (decode_mips16_operand): Likewise. * mips-dis.c (print_insn_arg): Handle OP_OPTIONAL_REG. gas/ * config/tc-mips.c (operand_reg_mask, match_operand): Handle OP_OPTIONAL_REG. (mips_ip, mips16_ip): Use mips_optional_operand_p to check for optional operands.
2013-08-19Remove PREFIX_EVEX_0F3A3E and PREFIX_EVEX_0F3A3FH.J. Lu3-16/+8
* i386-dis.c (PREFIX_EVEX_0F3A3E): Removed. (PREFIX_EVEX_0F3A3F): Likewise. * i386-dis-evex.h (evex_table): Updated.
2013-08-06opcodes/Richard Sandiford2-0/+6
2013-08-06 Jürgen Urban <JuergenUrban@gmx.de> * mips-opc.c (mips_builtin_opcodes): Add a suffixless version of VCLIPW. gas/ 2013-08-06 Jürgen Urban <JuergenUrban@gmx.de> * config/tc-mips.c (match_vu0_suffix_operand): Allow single-channel suffixes to be elided too. (mips_lookup_insn): Don't reject INSN2_VU0_CHANNEL_SUFFIX here. (mips_ip): Assume .xyzw if no VU0 suffix is specified. Allow +N to be omitted too. gas/testsuite/ 2013-08-06 Jürgen Urban <JuergenUrban@gmx.de> * gas/mips/r5900-error-vu0.s, gas/mips/r5900-error-vu0.l, gas/mips/r5900-full-vu0.s, gas/mips/r5900-full-vu0.d: Allow single-channel suffixes to be elided.
2013-08-05 * sparc-opc.c (v9andleon): Fix thinko.Eric Botcazou1-2/+2
2013-08-05gas/Eric Botcazou3-13/+38
* config/tc-sparc.c (sparc_arch_types): Add leon. (sparc_arch): Move sparc4 around and add leon. (sparc_target_format): Document -Aleon. * doc/c-sparc.texi: Likewise. include/ * opcode/sparc.h (sparc_opcode_arch_val): Add SPARC_OPCODE_ARCH_LEON. opcodes/ * sparc-dis.c (compute_arch_mask): Set SPARC_OPCODE_ARCH_LEON bit for bfd_mach_sparc. * sparc-opc.c (MASK_LEON): Define. (v6, v6notlet, v7, v8, v6notv9): Add MASK_LEON. (letandleon): New macro. (v9andleon): Likewise. (sparc_opc): Add leon. (umac): Enable for letandleon. (smac): Likewise. (casa): Enable for v9andleon. (cas): Likewise. (casl): Likewise.
2013-08-04include/opcode/Richard Sandiford3-16/+248
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de> Richard Sandiford <rdsandiford@googlemail.com> * mips.h: Document new VU0 operand characters. (OP_VU0_SUFFIX, OP_VU0_MATCH_SUFFIX): New mips_operand_types. (OP_REG_VF, OP_REG_VI, OP_REG_R5900_I, OP_REG_R5900_Q, OP_REG_R5900_R) (OP_REG_R5900_ACC): New mips_reg_operand_types. (INSN2_VU0_CHANNEL_SUFFIX): New macro. (mips_vu0_channel_mask): Declare. opcodes/ 2013-08-04 Jürgen Urban <JuergenUrban@gmx.de> Richard Sandiford <rdsandiford@googlemail.com> * mips-dis.c (print_reg): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I, OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC. (print_vu0_channel): New function. (print_insn_arg): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX. (print_insn_args): Handle '#'. (print_insn_mips): Handle INSN2_VU0_CHANNEL_SUFFIX. * mips-opc.c (mips_vu0_channel_mask): New constant. (decode_mips_operand): Handle new VU0 operand types. (VU0, VU0CH): New macros. (mips_builtin_opcodes): Add VU0 opcodes. Use "+7" rather than "E" for LQC2 and SQC2. Use "+9" rather than "G" for EE CFC2 and CTC2. Use "+6" rather than "G" for QMFC2 and QMTC2. gas/ 2013-08-04 Jürgen Urban <JuergenUrban@gmx.de> Richard Sandiford <rdsandiford@googlemail.com> * config/tc-mips.c (MAX_OPERANDS): Bump to 6. (RWARN): Bump to 0x8000000. (RTYPE_VI, RTYPE_VF, RTYPE_R5900_I, RTYPE_R5900_Q, RTYPE_R5900_R) (RTYPE_R5900_ACC): New register types. (RTYPE_MASK): Include them. (R5900_I_NAMES, R5900_Q_NAMES, R5900_R_NAMES, R5900_ACC_NAMES): New macros. (reg_names): Include them. (mips_parse_register_1): New function, split out from... (mips_parse_register): ...here. Add a channels_ptr parameter. Look for VU0 channel suffixes when nonnull. (reg_lookup): Update the call to mips_parse_register. (mips_parse_vu0_channels): New function. (OT_CHANNELS, OT_DOUBLE_CHAR): New mips_operand_token_types. (mips_operand_token): Add a "channels" field to the union. Extend the comment above "ch" to OT_DOUBLE_CHAR. (mips_parse_base_start): Match -- and ++. Handle channel suffixes. (mips_parse_argument_token): Handle channel suffixes here too. (validate_mips_insn): Handle INSN2_VU0_CHANNEL_SUFFIX. Ignore OP_VU0_MATCH_SUFFIX when calculating the used bits. Handle '#' formats. (md_begin): Register $vfN and $vfI registers. (operand_reg_mask): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX. (convert_reg_type): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I, OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC. (match_vu0_suffix_operand): New function. (match_operand): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX. (macro): Use "+7" rather than "E" for LDQ2 and STQ2. (mips_lookup_insn): New function. (mips_ip): Use it. Allow "+K" operands to be elided at the end of an instruction. Handle '#' sequences. gas/testsuite/ 2013-08-04 Jürgen Urban <JuergenUrban@gmx.de> * gas/mips/r5900-vu0.d: Expect $vfN and $viN instead of numeric coprocessor registers. * gas/mips/r5900-all-vu0.s, gas/mips/r5900-all-vu0.d, gas/mips/r5900-full-vu0.s, gas/mips/r5900-full-vu0.d, gas/mips/r5900-error-vu0.s, gas/mips/r5900-error-vu0.l: New tests. * gas/mips/mips.exp: Run them.
2013-08-03include/opcode/Richard Sandiford3-13/+21
* mips.h (mips_pcrel_operand): Inherit from mips_int_operand. (mips_int_operand_min, mips_int_operand_max): New functions. (mips_decode_pcrel_operand): Use mips_decode_int_operand. opcodes/ * mips-formats.h (PCREL): Reorder parameters and update the definition to match new mips_pcrel_operand layout. (JUMP, JALX, BRANCH): Update accordingly. * mips16-opc.c (decode_mips16_operand): Likewise. gas/ * config/tc-mips.c (match_int_operand): Use mips_int_operand_min and mips_int_operand_max. (mips16_immed_operand, mips16_immed_operands, MIPS16_NUM_IMMED): Delete. (mips16_immed_operand, mips16_immed_in_range_p): New functions. (mips16_immed, mips16_extended_frag): Use them. Use mips_int_operand instead of mips16_immed_operand.
2013-08-01opcodes/Richard Sandiford2-1/+4
* micromips-opc.c (WR_s): Delete.
2013-08-01include/opcode/Richard Sandiford5-2573/+2575
* mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01include/opcode/Richard Sandiford3-42/+51
* mips.h (MIPS16_INSN_WRITE_SP, MIPS16_INSN_READ_31) (MIPS16_INSN_READ_PC, MIPS16_INSN_UNCOND_BRANCH) (MIPS16_INSN_COND_BRANCH): Delete. opcodes/ * mips16-opc.c (UBR, CBR, RD_31, RD_PC): Redefine as INSN2_* flags. (WR_SP): Replace with... (MOD_SP): ...this. (mips16_opcodes): Update accordingly. * mips-dis.c (print_insn_mips16): Likewise. gas/ * config/tc-mips.c (compact_branch_p, uncond_branch_p): Use the same flags for MIPS16 and non-MIPS16 instructions. (gpr_mod_mask): Move the INSN2_MOD_SP case outside the micromips block. (gpr_read_mask): Use INSN2_READ_GPR_31 for MIPS16 instructions too. (gpr_write_mask): Remove MIPS16_INSN_WRITE_SP handling. (can_swap_branch_p, get_append_method): Use the same flags for MIPS16 and non-MIPS16 instructions. Fix formatting.
2013-08-01opcodes/Richard Sandiford2-172/+176
* mips16-opc.c (mips16_opcodes): Reformat.
2013-08-01opcodes/Richard Sandiford3-18/+24
* mips-opc.c (mips_builtin_opcodes): Remove WR_* and RD_* flags for operands that are hard-coded to $0. * micromips-opc.c (micromips_opcodes): Likewise.
2013-08-01opcodes/Richard Sandiford3-6/+13
* mips-opc.c (mips_builtin_opcodes): Use WR_31 rather than WR_d for the single-operand forms of JALR and JALR.HB. * micromips-opc.c (micromips_opcodes): Likewise JALR, JALRS, JALR.HB and JALRS.HB.
2013-08-01opcodes/Richard Sandiford2-31/+37
* mips-opc.c (mips_builtin_opcodes): Add FP_D to VR5400 vector instructions. Fix them to use WR_MACC instead of WR_CC and add missing RD_MACCs.
2013-08-01opcodes/Richard Sandiford2-1/+5
* mips-dis.c (print_mips16_insn_arg): Include ISA bit in base address.
2013-07-30opcodes/Peter Bergner2-28/+15
* ppc-dis.c (powerpc_init_dialect): Use ppc_parse_cpu() to set dialect.
2013-07-26Add Intel AVX-512 supportH.J. Lu9-15036/+43415
binutils/ 2013-07-26 Sergey Guriev <sergey.s.guriev@intel.com> Alexander Ivchenko <alexander.ivchenko@intel.com> Maxim Kuznetsov <maxim.kuznetsov@intel.com> Sergey Lega <sergey.s.lega@intel.com> Anna Tikhonova <anna.tikhonova@intel.com> Ilya Tocar <ilya.tocar@intel.com> Andrey Turetskiy <andrey.turetskiy@intel.com> Ilya Verbin <ilya.verbin@intel.com> Kirill Yukhin <kirill.yukhin@intel.com> Michael Zolotukhin <michael.v.zolotukhin@intel.com> * dwarf.c (dwarf_regnames_i386): Add k0-k7 registers and numeration in comments. (dwarf_regnames_x86_64): Add xmm16-31 and k0-k7 registers to dwarf table. gas/ 2013-07-26 Sergey Guriev <sergey.s.guriev@intel.com> Alexander Ivchenko <alexander.ivchenko@intel.com> Maxim Kuznetsov <maxim.kuznetsov@intel.com> Sergey Lega <sergey.s.lega@intel.com> Anna Tikhonova <anna.tikhonova@intel.com> Ilya Tocar <ilya.tocar@intel.com> Andrey Turetskiy <andrey.turetskiy@intel.com> Ilya Verbin <ilya.verbin@intel.com> Kirill Yukhin <kirill.yukhin@intel.com> Michael Zolotukhin <michael.v.zolotukhin@intel.com> * config/tc-i386-intel.c (O_zmmword_ptr): New. (i386_types): Add zmmword. (i386_intel_simplify_register): Allow regzmm. (i386_intel_simplify): Handle zmmwords. (i386_intel_operand): Handle RC/SAE, vector operations and zmmwords. * config/tc-i386.c (ZMMWORD_MNEM_SUFFIX): New. (struct RC_Operation): New. (struct Mask_Operation): New. (struct Broadcast_Operation): New. (vex_prefix): Size of bytes increased to 4 to support EVEX encoding. (enum i386_error): Add new error codes: unsupported_broadcast, broadcast_not_on_src_operand, broadcast_needed, unsupported_masking, mask_not_on_destination, no_default_mask, unsupported_rc_sae, rc_sae_operand_not_last_imm, invalid_register_operand, try_vector_disp8. (struct _i386_insn): Add new fields vrex, need_vrex, mask, rounding, broadcast, memshift. (struct RC_name): New. (RC_NamesTable): New. (evexlig): New. (evexwig): New. (extra_symbol_chars): Add '{'. (cpu_arch): Add AVX512F, AVX512CD, AVX512ER and AVX512PF. (i386_operand_type): Add regzmm, regmask and vec_disp8. (match_mem_size): Handle zmmwords. (operand_type_match): Handle zmm-registers. (mode_from_disp_size): Handle vec_disp8. (fits_in_vec_disp8): New. (md_begin): Handle {} properly. (type_names): Add "rZMM", "Mask reg" and "Vector d8". (build_vex_prefix): Handle vrex. (build_evex_prefix): New. (process_immext): Adjust to properly handle EVEX. (md_assemble): Add EVEX encoding support. (swap_2_operands): Correctly handle operands with masking, broadcasting or RC/SAE. (check_VecOperands): Support EVEX features. (VEX_check_operands): Properly handle 16 upper [xyz]mm registers. (match_template): Support regzmm and handle new error codes. (process_suffix): Handle zmmwords and zmm-registers. (check_byte_reg): Extend to zmm-registers. (process_operands): Extend to zmm-registers. (build_modrm_byte): Handle EVEX. (output_insn): Adjust to properly handle EVEX case. (disp_size): Handle vec_disp8. (output_disp): Support compressed disp8*N evex feature. (output_imm): Handle RC/SAE immediates properly. (check_VecOperations): New. (i386_immediate): Handle EVEX features. (i386_index_check): Handle zmmwords and zmm-registers. (RC_SAE_immediate): New. (i386_att_operand): Handle EVEX features. (parse_real_register): Add a check for ZMM/Mask registers. (OPTION_MEVEXLIG): New. (OPTION_MEVEXWIG): New. (md_longopts): Add mevexlig and mevexwig. (md_parse_option): Handle mevexlig and mevexwig options. (md_show_usage): Add description for mevexlig and mevexwig. * doc/c-i386.texi: Document avx512f/.avx512f, avx512cd/.avx512cd, avx512er/.avx512er, avx512pf/.avx512pf, mevexlig and mevexwig. gas/testsuite/ 2013-07-26 Sergey Guriev <sergey.s.guriev@intel.com> Alexander Ivchenko <alexander.ivchenko@intel.com> Maxim Kuznetsov <maxim.kuznetsov@intel.com> Sergey Lega <sergey.s.lega@intel.com> Anna Tikhonova <anna.tikhonova@intel.com> Ilya Tocar <ilya.tocar@intel.com> Andrey Turetskiy <andrey.turetskiy@intel.com> Ilya Verbin <ilya.verbin@intel.com> Kirill Yukhin <kirill.yukhin@intel.com> Michael Zolotukhin <michael.v.zolotukhin@intel.com> * gas/cfi/cfi-i386.s: Add tests for k0-k7. * gas/cfi/cfi-i386.d: Change to reflect above mentioned changes. * gas/cfi/cfi-x86_64.s: Add tests for xmm16-31, k0-7. * gas/cfi/cfi-x86_64.d: Change to reflect above mentioned changes. * gas/i386/ilp32/cfi/cfi-x86_64.d: Ditto. * gas/i386/intel-regs.s: Add tests for zmm0 and xmm16 registers. * gas/i386/intel-regs.d: Change correspondingly. * gas/i386/prefetch-intel.d: Reflect implementation of prefetchwt1. * gas/i386/prefetch.d: Ditto. * gas/i386/x86-64-prefetch-intel.d: Ditto. * gas/i386/x86-64-prefetch.d: Ditto. * gas/i386/avx512f-intel.d: New. * gas/i386/avx512f-nondef.d: New. * gas/i386/avx512f-nondef.s: New. * gas/i386/avx512f-opts-intel.d: New. * gas/i386/avx512f-opts.d: New. * gas/i386/avx512f-opts.s: New. * gas/i386/avx512f.d: New. * gas/i386/avx512f.s: New. * gas/i386/avx512cd-intel.d: New. * gas/i386/avx512cd.d: New. * gas/i386/avx512cd.s: New. * gas/i386/avx512er-intel.d: New. * gas/i386/avx512er.d: New. * gas/i386/avx512er.s: New. * gas/i386/avx512pf-intel.d: New. * gas/i386/avx512pf.d: New. * gas/i386/avx512pf.s: New. * gas/i386/evex-lig.s: New. * gas/i386/evex-lig256-intel.d: New. * gas/i386/evex-lig256.d: New. * gas/i386/evex-lig512-intel.d: New. * gas/i386/evex-lig512.d: New. * gas/i386/evex-wig.s: New. * gas/i386/evex-wig1-intel.d: New. * gas/i386/evex-wig1.d: New. * gas/i386/inval-avx512f.l: New. * gas/i386/inval-avx512f.s: New. * gas/i386/x86-64-avx512f-intel.d: New. * gas/i386/x86-64-avx512f-nondef.d: New. * gas/i386/x86-64-avx512f-nondef.s: New. * gas/i386/x86-64-avx512f-opts-intel.d: New. * gas/i386/x86-64-avx512f-opts.d: New. * gas/i386/x86-64-avx512f-opts.s: New. * gas/i386/x86-64-avx512f.d: New. * gas/i386/x86-64-avx512f.s: New. * gas/i386/x86-64-avx512cd-intel.d: New. * gas/i386/x86-64-avx512cd.d: New. * gas/i386/x86-64-avx512cd.s: New. * gas/i386/x86-64-avx512er-intel.d: New. * gas/i386/x86-64-avx512er.d: New. * gas/i386/x86-64-avx512er.s: New. * gas/i386/x86-64-avx512pf-intel.d: New. * gas/i386/x86-64-avx512pf.d: New. * gas/i386/x86-64-avx512pf.s: New. * gas/i386/x86-64-evex-lig.s: New. * gas/i386/x86-64-evex-lig256-intel.d: New. * gas/i386/x86-64-evex-lig256.d: New. * gas/i386/x86-64-evex-lig512-intel.d: New. * gas/i386/x86-64-evex-lig512.d: New. * gas/i386/x86-64-evex-wig.s: New. * gas/i386/x86-64-evex-wig1-intel.d: New. * gas/i386/x86-64-evex-wig1.d: New. * gas/i386/x86-64-inval-avx512f.l: New. * gas/i386/x86-64-inval-avx512f.s: New. * gas/i386/i386.exp: Run new AVX-512 tests. opcodes/ 2013-07-26 Sergey Guriev <sergey.s.guriev@intel.com> Alexander Ivchenko <alexander.ivchenko@intel.com> Maxim Kuznetsov <maxim.kuznetsov@intel.com> Sergey Lega <sergey.s.lega@intel.com> Anna Tikhonova <anna.tikhonova@intel.com> Ilya Tocar <ilya.tocar@intel.com> Andrey Turetskiy <andrey.turetskiy@intel.com> Ilya Verbin <ilya.verbin@intel.com> Kirill Yukhin <kirill.yukhin@intel.com> Michael Zolotukhin <michael.v.zolotukhin@intel.com> * i386-dis-evex.h: New. * i386-dis.c (OP_Rounding): New. (VPCMP_Fixup): New. (OP_Mask): New. (Rdq): New. (XMxmmq): New. (EXdScalarS): New. (EXymm): New. (EXEvexHalfBcstXmmq): New. (EXxmm_mdq): New. (EXEvexXGscat): New. (EXEvexXNoBcst): New. (VPCMP): New. (EXxEVexR): New. (EXxEVexS): New. (XMask): New. (MaskG): New. (MaskE): New. (MaskR): New. (MaskVex): New. (modes enum): Add evex_x_gscat_mode, evex_x_nobcst_mode, evex_half_bcst_xmmq_mode, xmm_mdq_mode, ymm_mode, evex_rounding_mode, evex_sae_mode, mask_mode. (USE_EVEX_TABLE): New. (EVEX_TABLE): New. (EVEX enum): New. (REG enum): Add REG_EVEX_0F72, REG_EVEX_0F73, REG_EVEX_0F38C6, REG_EVEX_0F38C7. (MOD enum): Add MOD_EVEX_0F10_PREFIX_1, MOD_EVEX_0F10_PREFIX_3, MOD_EVEX_0F11_PREFIX_1, MOD_EVEX_0F11_PREFIX_3, MOD_EVEX_0F12_PREFIX_0, MOD_EVEX_0F16_PREFIX_0, MOD_EVEX_0F38C6_REG_1, MOD_EVEX_0F38C6_REG_2, MOD_EVEX_0F38C6_REG_5, MOD_EVEX_0F38C6_REG_6, MOD_EVEX_0F38C7_REG_1, MOD_EVEX_0F38C7_REG_2, MOD_EVEX_0F38C7_REG_5, MOD_EVEX_0F38C7_REG_6. (PREFIX enum): Add PREFIX_VEX_0F41, PREFIX_VEX_0F42, PREFIX_VEX_0F44, PREFIX_VEX_0F45, PREFIX_VEX_0F46, PREFIX_VEX_0F47, PREFIX_VEX_0F4B, PREFIX_VEX_0F90, PREFIX_VEX_0F91, PREFIX_VEX_0F92, PREFIX_VEX_0F93, PREFIX_VEX_0F98, PREFIX_VEX_0F3A30, PREFIX_VEX_0F3A32, PREFIX_VEX_0F3AF0, PREFIX_EVEX_0F10, PREFIX_EVEX_0F11, PREFIX_EVEX_0F12, PREFIX_EVEX_0F13, PREFIX_EVEX_0F14, PREFIX_EVEX_0F15, PREFIX_EVEX_0F16, PREFIX_EVEX_0F17, PREFIX_EVEX_0F28, PREFIX_EVEX_0F29, PREFIX_EVEX_0F2A, PREFIX_EVEX_0F2B, PREFIX_EVEX_0F2C, PREFIX_EVEX_0F2D, PREFIX_EVEX_0F2E, PREFIX_EVEX_0F2F, PREFIX_EVEX_0F51, PREFIX_EVEX_0F58, PREFIX_EVEX_0F59, PREFIX_EVEX_0F5A, PREFIX_EVEX_0F5B, PREFIX_EVEX_0F5C, PREFIX_EVEX_0F5D, PREFIX_EVEX_0F5E, PREFIX_EVEX_0F5F, PREFIX_EVEX_0F62, PREFIX_EVEX_0F66, PREFIX_EVEX_0F6A, PREFIX_EVEX_0F6C, PREFIX_EVEX_0F6D, PREFIX_EVEX_0F6E, PREFIX_EVEX_0F6F, PREFIX_EVEX_0F70, PREFIX_EVEX_0F72_REG_0, PREFIX_EVEX_0F72_REG_1, PREFIX_EVEX_0F72_REG_2, PREFIX_EVEX_0F72_REG_4, PREFIX_EVEX_0F72_REG_6, PREFIX_EVEX_0F73_REG_2, PREFIX_EVEX_0F73_REG_6, PREFIX_EVEX_0F76, PREFIX_EVEX_0F78, PREFIX_EVEX_0F79, PREFIX_EVEX_0F7A, PREFIX_EVEX_0F7B, PREFIX_EVEX_0F7E, PREFIX_EVEX_0F7F, PREFIX_EVEX_0FC2, PREFIX_EVEX_0FC6, PREFIX_EVEX_0FD2, PREFIX_EVEX_0FD3, PREFIX_EVEX_0FD4, PREFIX_EVEX_0FD6, PREFIX_EVEX_0FDB, PREFIX_EVEX_0FDF, PREFIX_EVEX_0FE2, PREFIX_EVEX_0FE6 PREFIX_EVEX_0FE7, PREFIX_EVEX_0FEB, PREFIX_EVEX_0FEF, PREFIX_EVEX_0FF2, PREFIX_EVEX_0FF3, PREFIX_EVEX_0FF4, PREFIX_EVEX_0FFA, PREFIX_EVEX_0FFB, PREFIX_EVEX_0FFE, PREFIX_EVEX_0F380C, PREFIX_EVEX_0F380D, PREFIX_EVEX_0F3811, PREFIX_EVEX_0F3812, PREFIX_EVEX_0F3813, PREFIX_EVEX_0F3814, PREFIX_EVEX_0F3815, PREFIX_EVEX_0F3816, PREFIX_EVEX_0F3818, PREFIX_EVEX_0F3819, PREFIX_EVEX_0F381A, PREFIX_EVEX_0F381B, PREFIX_EVEX_0F381E, PREFIX_EVEX_0F381F, PREFIX_EVEX_0F3821, PREFIX_EVEX_0F3822, PREFIX_EVEX_0F3823, PREFIX_EVEX_0F3824, PREFIX_EVEX_0F3825, PREFIX_EVEX_0F3827, PREFIX_EVEX_0F3828, PREFIX_EVEX_0F3829, PREFIX_EVEX_0F382A, PREFIX_EVEX_0F382C, PREFIX_EVEX_0F382D, PREFIX_EVEX_0F3831, PREFIX_EVEX_0F3832, PREFIX_EVEX_0F3833, PREFIX_EVEX_0F3834, PREFIX_EVEX_0F3835, PREFIX_EVEX_0F3836, PREFIX_EVEX_0F3837, PREFIX_EVEX_0F3839, PREFIX_EVEX_0F383A, PREFIX_EVEX_0F383B, PREFIX_EVEX_0F383D, PREFIX_EVEX_0F383F, PREFIX_EVEX_0F3840, PREFIX_EVEX_0F3842, PREFIX_EVEX_0F3843, PREFIX_EVEX_0F3844, PREFIX_EVEX_0F3845, PREFIX_EVEX_0F3846, PREFIX_EVEX_0F3847, PREFIX_EVEX_0F384C, PREFIX_EVEX_0F384D, PREFIX_EVEX_0F384E, PREFIX_EVEX_0F384F, PREFIX_EVEX_0F3858, PREFIX_EVEX_0F3859, PREFIX_EVEX_0F385A, PREFIX_EVEX_0F385B, PREFIX_EVEX_0F3864, PREFIX_EVEX_0F3865, PREFIX_EVEX_0F3876, PREFIX_EVEX_0F3877, PREFIX_EVEX_0F387C, PREFIX_EVEX_0F387E, PREFIX_EVEX_0F387F, PREFIX_EVEX_0F3888, PREFIX_EVEX_0F3889, PREFIX_EVEX_0F388A, PREFIX_EVEX_0F388B, PREFIX_EVEX_0F3890, PREFIX_EVEX_0F3891, PREFIX_EVEX_0F3892, PREFIX_EVEX_0F3893, PREFIX_EVEX_0F3896, PREFIX_EVEX_0F3897, PREFIX_EVEX_0F3898, PREFIX_EVEX_0F3899, PREFIX_EVEX_0F389A, PREFIX_EVEX_0F389B, PREFIX_EVEX_0F389C, PREFIX_EVEX_0F389D, PREFIX_EVEX_0F389E, PREFIX_EVEX_0F389F, PREFIX_EVEX_0F38A0, PREFIX_EVEX_0F38A1, PREFIX_EVEX_0F38A2, PREFIX_EVEX_0F38A3, PREFIX_EVEX_0F38A6, PREFIX_EVEX_0F38A7, PREFIX_EVEX_0F38A8, PREFIX_EVEX_0F38A9, PREFIX_EVEX_0F38AA, PREFIX_EVEX_0F38AB, PREFIX_EVEX_0F38AC, PREFIX_EVEX_0F38AD, PREFIX_EVEX_0F38AE, PREFIX_EVEX_0F38AF, PREFIX_EVEX_0F38B6, PREFIX_EVEX_0F38B7, PREFIX_EVEX_0F38B8, PREFIX_EVEX_0F38B9, PREFIX_EVEX_0F38BA, PREFIX_EVEX_0F38BB, PREFIX_EVEX_0F38BC, PREFIX_EVEX_0F38BD, PREFIX_EVEX_0F38BE, PREFIX_EVEX_0F38BF, PREFIX_EVEX_0F38C4, PREFIX_EVEX_0F38C6_REG_1, PREFIX_EVEX_0F38C6_REG_2, PREFIX_EVEX_0F38C6_REG_5, PREFIX_EVEX_0F38C6_REG_6, PREFIX_EVEX_0F38C7_REG_1, PREFIX_EVEX_0F38C7_REG_2, PREFIX_EVEX_0F38C7_REG_5, PREFIX_EVEX_0F38C7_REG_6, PREFIX_EVEX_0F38C8, PREFIX_EVEX_0F38CA, PREFIX_EVEX_0F38CB, PREFIX_EVEX_0F38CC, PREFIX_EVEX_0F38CD, PREFIX_EVEX_0F3A00, PREFIX_EVEX_0F3A01, PREFIX_EVEX_0F3A03, PREFIX_EVEX_0F3A04, PREFIX_EVEX_0F3A05, PREFIX_EVEX_0F3A08, PREFIX_EVEX_0F3A09, PREFIX_EVEX_0F3A0A, PREFIX_EVEX_0F3A0B, PREFIX_EVEX_0F3A17, PREFIX_EVEX_0F3A18, PREFIX_EVEX_0F3A19, PREFIX_EVEX_0F3A1A, PREFIX_EVEX_0F3A1B, PREFIX_EVEX_0F3A1D, PREFIX_EVEX_0F3A1E, PREFIX_EVEX_0F3A1F, PREFIX_EVEX_0F3A21, PREFIX_EVEX_0F3A23, PREFIX_EVEX_0F3A25, PREFIX_EVEX_0F3A26, PREFIX_EVEX_0F3A27, PREFIX_EVEX_0F3A38, PREFIX_EVEX_0F3A39, PREFIX_EVEX_0F3A3A, PREFIX_EVEX_0F3A3B, PREFIX_EVEX_0F3A3E, PREFIX_EVEX_0F3A3F, PREFIX_EVEX_0F3A43, PREFIX_EVEX_0F3A54, PREFIX_EVEX_0F3A55. (VEX_LEN enum): Add VEX_LEN_0F41_P_0, VEX_LEN_0F42_P_0, VEX_LEN_0F44_P_0, VEX_LEN_0F45_P_0, VEX_LEN_0F46_P_0, VEX_LEN_0F47_P_0, VEX_LEN_0F4B_P_2, VEX_LEN_0F90_P_0, VEX_LEN_0F91_P_0, VEX_LEN_0F92_P_0, VEX_LEN_0F93_P_0, VEX_LEN_0F98_P_0, VEX_LEN_0F3A30_P_2, VEX_LEN_0F3A32_P_2, VEX_W_0F41_P_0_LEN_1, VEX_W_0F42_P_0_LEN_1, VEX_W_0F44_P_0_LEN_0, VEX_W_0F45_P_0_LEN_1, VEX_W_0F46_P_0_LEN_1, VEX_W_0F47_P_0_LEN_1, VEX_W_0F4B_P_2_LEN_1, VEX_W_0F90_P_0_LEN_0, VEX_W_0F91_P_0_LEN_0, VEX_W_0F92_P_0_LEN_0, VEX_W_0F93_P_0_LEN_0, VEX_W_0F98_P_0_LEN_0, VEX_W_0F3A30_P_2_LEN_0, VEX_W_0F3A32_P_2_LEN_0. (VEX_W enum): Add EVEX_W_0F10_P_0, EVEX_W_0F10_P_1_M_0, EVEX_W_0F10_P_1_M_1, EVEX_W_0F10_P_2, EVEX_W_0F10_P_3_M_0, EVEX_W_0F10_P_3_M_1, EVEX_W_0F11_P_0, EVEX_W_0F11_P_1_M_0, EVEX_W_0F11_P_1_M_1, EVEX_W_0F11_P_2, EVEX_W_0F11_P_3_M_0, EVEX_W_0F11_P_3_M_1, EVEX_W_0F12_P_0_M_0, EVEX_W_0F12_P_0_M_1, EVEX_W_0F12_P_1, EVEX_W_0F12_P_2, EVEX_W_0F12_P_3, EVEX_W_0F13_P_0, EVEX_W_0F13_P_2, EVEX_W_0F14_P_0, EVEX_W_0F14_P_2, EVEX_W_0F15_P_0, EVEX_W_0F15_P_2, EVEX_W_0F16_P_0_M_0, EVEX_W_0F16_P_0_M_1, EVEX_W_0F16_P_1, EVEX_W_0F16_P_2, EVEX_W_0F17_P_0, EVEX_W_0F17_P_2, EVEX_W_0F28_P_0, EVEX_W_0F28_P_2, EVEX_W_0F29_P_0, EVEX_W_0F29_P_2, EVEX_W_0F2A_P_1, EVEX_W_0F2A_P_3, EVEX_W_0F2B_P_0, EVEX_W_0F2B_P_2, EVEX_W_0F2E_P_0, EVEX_W_0F2E_P_2, EVEX_W_0F2F_P_0, EVEX_W_0F2F_P_2, EVEX_W_0F51_P_0, EVEX_W_0F51_P_1, EVEX_W_0F51_P_2, EVEX_W_0F51_P_3, EVEX_W_0F58_P_0, EVEX_W_0F58_P_1, EVEX_W_0F58_P_2, EVEX_W_0F58_P_3, EVEX_W_0F59_P_0, EVEX_W_0F59_P_1, EVEX_W_0F59_P_2, EVEX_W_0F59_P_3, EVEX_W_0F5A_P_0, EVEX_W_0F5A_P_1, EVEX_W_0F5A_P_2, EVEX_W_0F5A_P_3, EVEX_W_0F5B_P_0, EVEX_W_0F5B_P_1, EVEX_W_0F5B_P_2, EVEX_W_0F5C_P_0, EVEX_W_0F5C_P_1, EVEX_W_0F5C_P_2, EVEX_W_0F5C_P_3, EVEX_W_0F5D_P_0, EVEX_W_0F5D_P_1, EVEX_W_0F5D_P_2, EVEX_W_0F5D_P_3, EVEX_W_0F5E_P_0, EVEX_W_0F5E_P_1, EVEX_W_0F5E_P_2, EVEX_W_0F5E_P_3, EVEX_W_0F5F_P_0, EVEX_W_0F5F_P_1, EVEX_W_0F5F_P_2, EVEX_W_0F5F_P_3, EVEX_W_0F62_P_2, EVEX_W_0F66_P_2, EVEX_W_0F6A_P_2, EVEX_W_0F6C_P_2, EVEX_W_0F6D_P_2, EVEX_W_0F6E_P_2, EVEX_W_0F6F_P_1, EVEX_W_0F6F_P_2, EVEX_W_0F70_P_2, EVEX_W_0F72_R_2_P_2, EVEX_W_0F72_R_6_P_2, EVEX_W_0F73_R_2_P_2, EVEX_W_0F73_R_6_P_2, EVEX_W_0F76_P_2, EVEX_W_0F78_P_0, EVEX_W_0F79_P_0, EVEX_W_0F7A_P_1, EVEX_W_0F7A_P_3, EVEX_W_0F7B_P_1, EVEX_W_0F7B_P_3, EVEX_W_0F7E_P_1, EVEX_W_0F7E_P_2, EVEX_W_0F7F_P_1, EVEX_W_0F7F_P_2, EVEX_W_0FC2_P_0, EVEX_W_0FC2_P_1, EVEX_W_0FC2_P_2, EVEX_W_0FC2_P_3, EVEX_W_0FC6_P_0, EVEX_W_0FC6_P_2, EVEX_W_0FD2_P_2, EVEX_W_0FD3_P_2, EVEX_W_0FD4_P_2, EVEX_W_0FD6_P_2, EVEX_W_0FE6_P_1, EVEX_W_0FE6_P_2, EVEX_W_0FE6_P_3, EVEX_W_0FE7_P_2, EVEX_W_0FF2_P_2, EVEX_W_0FF3_P_2, EVEX_W_0FF4_P_2, EVEX_W_0FFA_P_2, EVEX_W_0FFB_P_2, EVEX_W_0FFE_P_2, EVEX_W_0F380C_P_2, EVEX_W_0F380D_P_2, EVEX_W_0F3811_P_1, EVEX_W_0F3812_P_1, EVEX_W_0F3813_P_1, EVEX_W_0F3813_P_2, EVEX_W_0F3814_P_1, EVEX_W_0F3815_P_1, EVEX_W_0F3818_P_2, EVEX_W_0F3819_P_2, EVEX_W_0F381A_P_2, EVEX_W_0F381B_P_2, EVEX_W_0F381E_P_2, EVEX_W_0F381F_P_2, EVEX_W_0F3821_P_1, EVEX_W_0F3822_P_1, EVEX_W_0F3823_P_1, EVEX_W_0F3824_P_1, EVEX_W_0F3825_P_1, EVEX_W_0F3825_P_2, EVEX_W_0F3828_P_2, EVEX_W_0F3829_P_2, EVEX_W_0F382A_P_1, EVEX_W_0F382A_P_2, EVEX_W_0F3831_P_1, EVEX_W_0F3832_P_1, EVEX_W_0F3833_P_1, EVEX_W_0F3834_P_1, EVEX_W_0F3835_P_1, EVEX_W_0F3835_P_2, EVEX_W_0F3837_P_2, EVEX_W_0F383A_P_1, EVEX_W_0F3840_P_2, EVEX_W_0F3858_P_2, EVEX_W_0F3859_P_2, EVEX_W_0F385A_P_2, EVEX_W_0F385B_P_2, EVEX_W_0F3891_P_2, EVEX_W_0F3893_P_2, EVEX_W_0F38A1_P_2, EVEX_W_0F38A3_P_2, EVEX_W_0F38C7_R_1_P_2, EVEX_W_0F38C7_R_2_P_2, EVEX_W_0F38C7_R_5_P_2, EVEX_W_0F38C7_R_6_P_2, EVEX_W_0F3A00_P_2, EVEX_W_0F3A01_P_2, EVEX_W_0F3A04_P_2, EVEX_W_0F3A05_P_2, EVEX_W_0F3A08_P_2, EVEX_W_0F3A09_P_2, EVEX_W_0F3A0A_P_2, EVEX_W_0F3A0B_P_2, EVEX_W_0F3A18_P_2, EVEX_W_0F3A19_P_2, EVEX_W_0F3A1A_P_2, EVEX_W_0F3A1B_P_2, EVEX_W_0F3A1D_P_2, EVEX_W_0F3A21_P_2, EVEX_W_0F3A23_P_2, EVEX_W_0F3A38_P_2, EVEX_W_0F3A39_P_2, EVEX_W_0F3A3A_P_2, EVEX_W_0F3A3B_P_2, EVEX_W_0F3A43_P_2. (struct vex): Add fields evex, r, v, mask_register_specifier, zeroing, ll, b. (intel_names_xmm): Add upper 16 registers. (att_names_xmm): Ditto. (intel_names_ymm): Ditto. (att_names_ymm): Ditto. (names_zmm): New. (intel_names_zmm): Ditto. (att_names_zmm): Ditto. (names_mask): Ditto. (intel_names_mask): Ditto. (att_names_mask): Ditto. (names_rounding): Ditto. (names_broadcast): Ditto. (x86_64_table): Add escape to evex-table. (reg_table): Include reg_table evex-entries from i386-dis-evex.h. Fix prefetchwt1 instruction. (prefix_table): Add entries for new instructions. (vex_table): Ditto. (vex_len_table): Ditto. (vex_w_table): Ditto. (mod_table): Ditto. (get_valid_dis386): Properly handle new instructions. (print_insn): Handle zmm and mask registers, print mask operand. (intel_operand_size): Support EVEX, new modes and sizes. (OP_E_register): Handle new modes. (OP_E_memory): Ditto. (OP_G): Ditto. (OP_XMM): Ditto. (OP_EX): Ditto. (OP_VEX): Ditto. * i386-gen.c (cpu_flag_init): Update CPU_ANY_SSE_FLAGS and CPU_ANY_AVX_FLAGS. Add CPU_AVX512F_FLAGS, CPU_AVX512CD_FLAGS, CPU_AVX512ER_FLAGS and CPU_AVX512PF_FLAGS. (cpu_flags): Add CpuAVX512F, CpuAVX512CD, CpuAVX512ER, CpuAVX512PF and CpuVREX. (operand_type_init): Add OPERAND_TYPE_REGZMM, OPERAND_TYPE_REGMASK and OPERAND_TYPE_VEC_DISP8. (opcode_modifiers): Add EVex, Masking, VecESize, Broadcast, StaticRounding, SAE, Disp8MemShift, NoDefMask. (operand_types): Add RegZMM, RegMask, Vec_Disp8, Zmmword. * i386-init.h: Regenerate. * i386-opc.h (CpuAVX512F): New. (CpuAVX512CD): New. (CpuAVX512ER): New. (CpuAVX512PF): New. (CpuVREX): New. (i386_cpu_flags): Add cpuavx512f, cpuavx512cd, cpuavx512er, cpuavx512pf and cpuvrex fields. (VecSIB): Add VecSIB512. (EVex): New. (Masking): New. (VecESize): New. (Broadcast): New. (StaticRounding): New. (SAE): New. (Disp8MemShift): New. (NoDefMask): New. (i386_opcode_modifier): Add evex, masking, vecesize, broadcast, staticrounding, sae, disp8memshift and nodefmask. (RegZMM): New. (Zmmword): Ditto. (Vec_Disp8): Ditto. (i386_operand_type): Add regzmm, regmask, zmmword and vec_disp8 fields. (RegVRex): New. * i386-opc.tbl: Add AVX512 instructions. * i386-reg.tbl: Add 16 upper XMM and YMM registers, 32 new ZMM registers, mask registers. * i386-tbl.h: Regenerate.
2013-07-25opcodes/Richard Sandiford2-4/+10
2013-07-25 Aaro Koskinen <aaro.koskinen@iki.fi> PR gas/15220 * mips-opc.c (mips_builtin_opcodes): Fix wrong opcodes for Loongson 2F madd.ps, msub.ps, nmadd.ps and nmsub.ps. gas/testsuite/ * gas/mips/loongson-2f.d: Fix expected output for madd.ps, msub.ps, nmadd.ps and nmsub.ps.
2013-07-25Support Intel SHAH.J. Lu7-2782/+2981
gas/ 2013-07-25 Michael Zolotukhin <michael.v.zolotukhin@intel.com> * config/tc-i386.c (cpu_arch): Add .sha. * doc/c-i386.texi: Document sha/.sha. gas/testsuite/ 2013-07-25 Michael Zolotukhin <michael.v.zolotukhin@intel.com> * gas/i386/sha.d: New. * gas/i386/sha.s: New. * gas/i386/x86-64-sha.d: New. * gas/i386/x86-64-sha.s: New. * gas/i386/i386.exp: Run new SHA tests. opcodes/ 2013-07-25 Michael Zolotukhin <michael.v.zolotukhin@intel.com> * i386-dis.c (PREFIX enum): Add PREFIX_0F38C8, PREFIX_0F38C9, PREFIX_0F38CA, PREFIX_0F38CB, PREFIX_0F38CC, PREFIX_0F38CD, PREFIX_0F3ACC. (prefix_table): Updated. (three_byte_table): Likewise. * i386-gen.c (cpu_flag_init): Add CPU_SHA_FLAGS. (cpu_flags): Add CpuSHA. (i386_cpu_flags): Add cpusha. * i386-init.h: Regenerate. * i386-opc.h (CpuSHA): New. (CpuUnused): Restored. (i386_cpu_flags): Add cpusha. * i386-opc.tbl: Add SHA instructions. * i386-tbl.h: Regenerate.
2013-07-25Correct MPX ChangeLog entriesH.J. Lu1-2/+3
2013-07-24Support Intel MPXH.J. Lu8-9979/+10292
gas/ 2013-07-24 Anna Tikhonova <anna.tikhonova@intel.com> Kirill Yukhin <kirill.yukhin@intel.com> Michael Zolotukhin <michael.v.zolotukhin@intel.com> * config/tc-i386.c (BND_PREFIX): New. (struct _i386_insn): Add new field bnd_prefix. (add_bnd_prefix): New. (cpu_arch): Add MPX. (i386_operand_type): Add regbnd. (md_assemble): Handle BND prefixes. (parse_insn): Likewise. (output_branch): Likewise. (output_jump): Likewise. (build_modrm_byte): Handle regbnd. (OPTION_MADD_BND_PREFIX): New. (md_longopts): Add entry for 'madd-bnd-prefix'. (md_parse_option): Handle madd-bnd-prefix option. (md_show_usage): Add description for madd-bnd-prefix option. * doc/c-i386.texi: Document mpx/.mpx and -madd-bnd-prefix. gas/testsuite/ 2013-07-24 Anna Tikhonova <anna.tikhonova@intel.com> Kirill Yukhin <kirill.yukhin@intel.com> Michael Zolotukhin <michael.v.zolotukhin@intel.com> * gas/i386/mpx-add-bnd-prefix.s: New. * gas/i386/mpx-add-bnd-prefix.d: New. * gas/i386/mpx-inval-1.l: New. * gas/i386/mpx-inval-1.s: New. * gas/i386/mpx.d: New. * gas/i386/mpx.s: New. * gas/i386/x86-64-mpx-add-bnd-prefix.d: New. * gas/i386/x86-64-mpx-add-bnd-prefix.s: New. * gas/i386/x86-64-mpx-addr32.d: New. * gas/i386/x86-64-mpx-addr32.s: New. * gas/i386/x86-64-mpx-inval-1.l: New. * gas/i386/x86-64-mpx-inval-1.s: New. * gas/i386/x86-64-mpx-inval-2.l: New. * gas/i386/x86-64-mpx-inval-2.s: New. * gas/i386/x86-64-mpx.d: New. * gas/i386/x86-64-mpx.s: New. * gas/i386/nops.d: Adjust to MPX changes. * gas/i386/nops.s: Likewise. * gas/i386/x86-64-nops.d: Likewise. * gas/i386/x86-64-nops.s: Likewise. * gas/i386/ilp32/x86-64-nops.d: Likewise. * gas/i386/i386.exp: Run new MPX tests. include/opcode/ 2013-07-24 Anna Tikhonova <anna.tikhonova@intel.com> Kirill Yukhin <kirill.yukhin@intel.com> Michael Zolotukhin <michael.v.zolotukhin@intel.com> * i386.h (BND_PREFIX_OPCODE): New. opcodes/ 2013-07-24 Anna Tikhonova <anna.tikhonova@intel.com> Kirill Yukhin <kirill.yukhin@intel.com> Michael Zolotukhin <michael.v.zolotukhin@intel.com> * i386-dis.c (BND_Fixup): New. (Ebnd): New. (Ev_bnd): New. (Gbnd): New. (BND): New. (v_bnd_mode): New. (bnd_mode): New. (MOD enum): Add new entries. (PREFIX enum): Likewise. (dis tables): Replace XX with BND for near branch and call instructions. (prefix_table): Add new entries. (mod_table): Likewise. (names_bnd): New. (intel_names_bnd): New. (att_names_bnd): New. (BND_PREFIX): New. (prefix_name): Handle BND_PREFIX. (print_insn): Initialize names_bnd. (intel_operand_size): Handle new modes. (OP_E_register): Likewise. (OP_E_memory): Likewise. (OP_G): Likewise. * i386-gen.c (cpu_flag_init): Add CpuMPX. (cpu_flags): Add CpuMPX. (operand_type_init): Add RegBND. (opcode_modifiers): Add BNDPrefixOk. (operand_types): Add RegBND. * i386-init.h: Regenerate. * i386-opc.h (CpuMPX): New. (CpuUnused): Comment out. (i386_cpu_flags): Add cpumpx. (BNDPrefixOk): New. (i386_opcode_modifier): Add bndprefixok. (RegBND): New. (i386_operand_type): Add regbnd. * i386-opc.tbl: Add BNDPrefixOk to near jumps, calls and rets. Add MPX instructions and bnd prefix. * i386-reg.tbl: Add bnd0-bnd3 registers. * i386-tbl.h: Regenerate.
2013-07-17opcodes/Richard Sandiford2-4/+13
* mips-formats.h (MAPPED_INT, MAPPED_REG, REG_PAIR): Add ATTRIBUTE_UNUSED.
2013-07-14opcodes/Richard Sandiford6-3225/+3170
* Makefile.am (mips-opc.lo, micromips-opc.lo, mips16-opc.lo): Remove special rules. * Makefile.in: Regenerate. * mips-opc.c, micromips-opc.c, mips16-opc.c: Explicitly initialize all fields. Reformat.
2013-07-14include/opcode/Richard Sandiford3-460/+328
* mips.h (mips_operand_type): Add OP_ENTRY_EXIT_LIST and OP_SAVE_RESTORE_LIST. (decode_mips16_operand): Declare. opcodes/ * mips16-opc.c: Include mips-formats.h. (reg_0_map, reg_29_map, reg_31_map, reg_m16_map, reg32r_map): New static arrays. (decode_mips16_operand): New function. * mips-dis.c (mips16_to_32_reg_map, mips16_reg_names): Delete. (print_insn_arg): Handle OP_ENTRY_EXIT list. Abort for OP_SAVE_RESTORE_LIST. (print_mips16_insn_arg): Change interface. Use mips_operand structures. Delete GET_OP_S. Move GET_OP definition to... (print_insn_mips16): ...here. Call init_print_arg_state. Update the call to print_mips16_insn_arg.
2013-07-14include/opcode/Richard Sandiford5-1086/+720
* mips.h (mips_operand_type, mips_reg_operand_type): New enums. (mips_operand, mips_int_operand, mips_mapped_int_operand) (mips_msb_operand, mips_reg_operand, mips_reg_pair_operand) (mips_pcrel_operand): New structures. (mips_insert_operand, mips_extract_operand, mips_signed_operand) (mips_decode_int_operand, mips_decode_pcrel_operand): New functions. (decode_mips_operand, decode_micromips_operand): Declare. opcodes/ * mips-formats.h: New file. * mips-opc.c: Include mips-formats.h. (reg_0_map): New static array. (decode_mips_operand): New function. * micromips-opc.c: Remove <stdio.h> include. Include mips-formats.h. (reg_0_map, reg_28_map, reg_29_map, reg_31_map, reg_m16_map) (reg_mn_map, reg_q_map, reg_h_map1, reg_h_map2, int_b_map) (int_c_map): New static arrays. (decode_micromips_operand): New function. * mips-dis.c (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_d_map, micromips_to_32_reg_e_map) (micromips_to_32_reg_f_map, micromips_to_32_reg_g_map) (micromips_to_32_reg_h_map1, micromips_to_32_reg_h_map2) (micromips_to_32_reg_l_map, micromips_to_32_reg_m_map) (micromips_to_32_reg_n_map, micromips_to_32_reg_q_map) (micromips_imm_b_map, micromips_imm_c_map): Delete. (print_reg): New function. (mips_print_arg_state): New structure. (init_print_arg_state, print_insn_arg): New functions. (print_insn_args): Change interface and use mips_operand structures. Delete GET_OP_S. Move GET_OP definition to... (print_insn_mips): ...here. Update the call to print_insn_args. (print_insn_micromips): Use print_insn_args. gas/ * config/tc-mips.c (validate_mips_insn): Move further up file. Add insn_bits and decode_operand arguments. Use the mips_operand fields to work out which bits an operand occupies. Detect double definitions. (validate_micromips_insn): Move further up file. Call into validate_mips_insn.
2013-07-14include/opcode/Richard Sandiford2-14/+19
* mips.h: Document MIPS16 "I" opcode. opcodes/ * mips16-opc.c (mips16_opcodes): Use "I" for immediate operands in macros. gas/ * config/tc-mips.c (mips16_ip): Handle "I".
2013-07-14opcodes/Richard Sandiford2-3/+8
* mips-opc.c (mips_builtin_opcodes): Use "S,T" rather than "V,T" for ADDA.S, MULA.S and SUBA.S.
2013-07-08Replace Xmmword with Qword on cvttps2piH.J. Lu3-3/+9
gas/testsuite/ PR gas/13572 * gas/i386/simd.s: Add a test for cvttps2pi. * gas/i386/simd-intel.d: Updated. * gas/i386/simd.d: Likewise. opcodes/ PR gas/13572 * i386-opc.tbl: Replace Xmmword with Qword on cvttps2pi. * i386-tbl.h: Regenerated.
2013-07-07include/opcode/Richard Sandiford3-107/+24
* mips.h (M_ACLR_OB, M_ASET_OB, M_CACHE_OB, M_CACHEE_OB, M_L_DOB) (M_LB_A, M_LBE_OB, M_LBU_A, M_LBUE_OB, M_LD_A, M_LD_OB, M_LDC2_OB) (M_LDL_OB, M_LDM_OB, M_LDP_OB, M_LDR_OB, M_LH_A, M_LHE_OB, M_LHU_A) (M_LHUE_OB, M_LL_OB, M_LLD_OB, M_LLE_OB, M_LS_A, M_LW_A, M_LWE_OB) (M_LWC0_A, M_LWC1_A, M_LWC2_A, M_LWC2_OB, M_LWC3_A, M_LWL_A, M_LWL_OB) (M_LWLE_OB, M_LWM_OB, M_LWP_OB, M_LWR_A, M_LWR_OB, M_LWRE_OB, M_LWU_OB) (M_PREF_OB, M_PREFE_OB, M_S_DOB, M_SAA_OB, M_SAAD_OB, M_SC_OB) (M_SCD_OB, M_SCE_OB, M_SD_A, M_SD_OB, M_SDC2_OB, M_SDL_OB, M_SDM_OB) (M_SDP_OB, M_SDR_OB, M_SB_A, M_SBE_OB, M_SH_A, M_SHE_OB, M_SW_A) (M_SWE_OB, M_SWC0_A, M_SWC1_A, M_SWC2_A, M_SWC2_OB, M_SWC3_A, M_SWL_A) (M_SWL_OB, M_SWLE_OB, M_SWM_OB, M_SWP_OB, M_SWR_A, M_SWR_OB, M_SWRE_OB) (M_ULD, M_ULH, M_ULHU, M_ULW, M_USH, M_USW, M_USD): Delete. (M_ULD_A, M_ULH_A, M_ULHU_A, M_ULW_A, M_USH_A, M_USW_A, M_USD_A): Rename to... (M_ULD_AB, M_ULH_AB, M_ULHU_AB, M_ULW_AB, M_USH_AB, M_USW_AB) (M_USD_AB): ...these. opcodes/ * mips-opc.c (mips_builtin_opcodes): Remove o(b) macros. Move LD and SD A(B) macros up. * micromips-opc.c (micromips_opcodes): Likewise. gas/ * config/tc-mips.c (gprel16_reloc_p): New function. (macro_read_relocs): Assume BFD_RELOC_LO16 if all relocs are BFD_RELOC_UNUSED. (offset_high_part, small_offset_p): New functions. (nacro): Use them. Remove *_OB and *_DOB cases. For single- register load and store macros, handle the 16-bit offset case first. If a 16-bit offset is not suitable for the instruction we're generating, load it into the temporary register using ADDRESS_ADDI_INSN. Make the M_LI_DD code fall through into the M_L_DAB code once the address has been constructed. For double load and store macros, again handle the 16-bit offset case first. If the second register cannot be accessed from the same high part as the first, load it into AT using ADDRESS_ADDI_INSN. Fix the handling of LD in cases where the first register is the same as the base. Also handle the case where the offset is not 16 bits and the second register cannot be accessed from the same high part as the first. For unaligned loads and stores, fuse the offbits == 12 and old "ab" handling. Apply this handling whenever the second offset needs a different high part from the first. Construct the offset using ADDRESS_ADDI_INSN where possible, for offbits == 16 as well as offbits == 12. Use offset_reloc when constructing the individual loads and stores. (mips_ip): Set up imm_expr, imm2_expr, offset_expr, imm_reloc and offset_reloc before matching against a particular opcode. Handle elided 'A' constants. Allow 'A' constants to use relocation operators. gas/testsuite/ * gas/mips/ldstla-32.d: Avoid "lui at,0x0" sequences for truncated constants. * gas/mips/ldstla-32-shared.d: Likewise. * gas/mips/mcu.d: Use ADDIU in preference to LI+ADDU when adding 16-bit constants to the base. * gas/mips/micromips@mcu.d: Likewise. * gas/mips/micromips@cache.d: Likewise. * gas/mips/micromips@pref.d: Likewise. * gas/mips/micromips.d, gas/mips/micromips-insn32.d, gas/mips/micromips-noinsn32.d, gas/mips/micromips-trap.d: Likewise. Allow the full 16-bit offset range to be used for SB, LB and LBU in USH and ULH sequences. Fix the expected output for LD and SD when the two LW and SW offsets need different high parts. * gas/mips/eva.s: Test PREFE with relocation operators. * gas/mips/eva.d: Use ADDIU in preference to LI+ADDU for 16-bit constants. Update after eva.s change. * gas/mips/micromips@eva.d: Likewise. * gas/mips/ld-reloc.s, gas/mips/ld-reloc.d, gas/mips/l_d-reloc.s, gas/mips/l_d-reloc.d, gas/mips/ulw-reloc.s, gas/mips/ulw-reloc.d, gas/mips/micromips@ulw-reloc.d, gas/mips/ulh-reloc.s, gas/mips/ulh-reloc.d: New tests. * gas/mips/mips.exp: Run them.
2013-07-07opcodes/Richard Sandiford2-0/+7
* mips16-opc.c: Add entries for argumentless "entry" and "exit" instructions. gas/testsuite/ * gas/mips/mips16.d, gas/mips/mips16-64.d: Remove trailing whitespace from ENTRY and EXIT lines.
2013-07-07include/opcode/Richard Sandiford3-63/+32
* mips.h: Remove documentation of "[" and "]". Update documentation of "k" and the MDMX formats. opcodes/ * mips-opc.c (mips_builtin_opcodes): Use "Q" for the INSN_5400 MDMX-like instructions. * mips-dis.c (print_insn_arg): Use "$f" rather than "$v" when printing "Q" operands for INSN_5400 instructions. gas/ * config/tc-mips.c (validate_mips_insn): Remove "[" and "]" handling. (mips_ip): Likewise. Do not set is_mdmx for INSN_5400 instructions. Check constraints on the VR5400 RZU.OB, SLL.OB and SRL.OB instructions. gas/testsuite/ * gas/mips/vr5400-ill.s, gas/mips/vr5400-ill.l: New test. * gas/mips/mips.exp: Run it.
2013-07-07include/opcode/Richard Sandiford3-9/+13
* mips.h: Update documentation of "+s" and "+S". opcodes/ * mips-opc.c (mips_builtin_opcodes): Use "+s" for "cins32" and "+S" for "cins". * mips-dis.c (print_mips_arg): Update "+s" and "+S" comments. Combine cases. gas/ * config/tc-mips.c (mips_ip): Preserve the real bit number for "+p". Require the msb to be <= 31 for "+s". Check that the size is <= 31 for both "+s" and "+S".
2013-07-07include/opcode/Richard Sandiford5-20/+36
* mips.h: Document "+i". opcodes/ * mips-opc.c (mips_builtin_opcodes): Use "+i" rather than "a" for "jalx". * mips16-opc.c (mips16_opcodes): Likewise. * micromips-opc.c (micromips_opcodes): Likewise. * mips-dis.c (print_insn_args, print_mips16_insn_arg) (print_insn_mips16): Handle "+i". (print_insn_micromips): Likewise. Conditionally preserve the ISA bit for "a" but not for "+i". gas/ * config/tc-mips.c (validate_mips_insn, validate_micromips_insn): (mips_ip, mips16_ip): Handle "+i".
2013-07-07include/opcode/Richard Sandiford3-13/+21
* mips.h: Remove "mi" documentation. Update "mh" documentation. (OP_MASK_MI, OP_SH_MI, MICROMIPSOP_MASK_MI, MICROMIPSOP_MASK_MI): Delete. (INSN2_WRITE_GPR_MHI): Rename to... (INSN2_WRITE_GPR_MH): ...this. opcodes/ * micromips-opc.c (WR_mhi): Rename to.. (WR_mh): ...this. (micromips_opcodes): Update "movep" entry accordingly. Replace "mh,mi" with "mh". * mips-dis.c (micromips_to_32_reg_h_map): Rename to... (micromips_to_32_reg_h_map1): ...this. (micromips_to_32_reg_i_map): Rename to... (micromips_to_32_reg_h_map2): ...this. (print_micromips_insn): Remove "mi" case. Print both registers in the pair for "mh". gas/ * config/tc-mips.c (mips32_to_micromips_reg_h_map): Delete. (micromips_to_32_reg_h_map): Rename to... (micromips_to_32_reg_h_map1): ...this. (micromips_to_32_reg_i_map): Rename to... (micromips_to_32_reg_h_map2): ...this. (mips_lookup_reg_pair): New function. (gpr_write_mask, macro): Adjust after above renaming. (validate_micromips_insn): Remove "mi" handling. (mips_ip): Likewise. Parse both registers in a pair for "mh".
2013-07-07include/opcode/Richard Sandiford4-120/+69
* mips.h: Remove documentation of "+D" and "+T". opcodes/ * mips-opc.c (mips_builtin_opcodes): Remove "+D" and "+T" entries. * micromips-opc.c (micromips_opcodes): Likewise. * mips-dis.c (print_insn_args, print_insn_micromips): Remove "+D" and "+T" handling. Check for a "0" suffix when deciding whether to use coprocessor 0 names. In that case, also check for ",H" selectors. gas/ * config/tc-mips.c (validate_mips_insn, validate_micromips_insn) (mips_ip): Remove "+D" and "+T" handling. gas/testsuite/ * gas/mips/lb.d, gas/mips/sb.d: Use coprocessor register names for LWC0 and SWC0.
2013-07-052013-07-05 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>Andreas Krebbel3-9/+19
opcodes/ * s390-opc.c (J12_12, J24_24): New macros. (INSTR_MII_UPI): Rename to INSTR_MII_UPP. (MASK_MII_UPI): Rename to MASK_MII_UPP. * s390-opc.txt: Rename MII_UPI to MII_UPP for bprp instruction. include/elf/ * s390.h: Add new relocs R_390_PC12DBL, R_390_PLT12DBL, R_390_PC24DBL, and R_390_PLT24DBL. gas/testsuite/ * gas/s390/zarch-zEC12.s: Change bprp second operand and add variants requiring relocations. * gas/s390/zarch-zEC12.d: Likewise. gas/ * config/tc-s390.c (md_gather_operands, md_apply_fix): Support new relocs. bfd/ * elf32-s390.c: Add new relocation definitions R_390_PC12DBL, R_390_PLT12DBL, R_390_PC24DBL, and R_390_PLT24DBL. (elf_s390_reloc_type_lookup, elf_s390_check_relocs) (elf_s390_gc_sweep_hook, elf_s390_relocate_section): Support new relocations. * elf64-s390.c: See elf32-s390.c * bfd-in2.h: Add new relocs to enum bfd_reloc_code_real. * libbfd.h: Add new reloc strings.
2013-07-04 * ppc-opc.c (powerpc_opcodes): Add tdui, twui, tdu, twu, tui, tu.Alan Modra2-0/+10
2013-06-26 * rx-decode.opc (rx_decode_opcode): Check sd field as well as ssNick Clifton3-2/+8
field when checking for type 2 nop. * rx-decode.c: Regenerate.
2013-06-25 bfd/Maciej W. Rozycki2-0/+14
* elfxx-mips.h (_bfd_mips_elf_insn32): New prototype. * elfxx-mips.c (mips_elf_link_hash_table): Add insn32 member. (STUB_MOVE32_MICROMIPS, STUB_JALR32_MICROMIPS): New macros. (MICROMIPS_INSN32_FUNCTION_STUB_NORMAL_SIZE): Likewise. (MICROMIPS_INSN32_FUNCTION_STUB_BIG_SIZE): Likewise. (micromips_insn32_o32_exec_plt0_entry): New variable. (micromips_insn32_o32_exec_plt_entry): Likewise. (_bfd_mips_elf_adjust_dynamic_symbol): Handle insn32 mode. (mips_elf_estimate_stub_size): Likewise. (_bfd_mips_elf_size_dynamic_sections): Likewise. (_bfd_mips_elf_finish_dynamic_symbol): Likewise. (mips_finish_exec_plt): Likewise. (_bfd_mips_elf_relax_section): Likewise. (_bfd_mips_elf_insn32): New function. (_bfd_mips_elf_get_synthetic_symtab): Handle insn32 PLT. gas/ * config/tc-mips.c (mips_set_options): Add insn32 member. (mips_opts): Initialize it. (NOP_INSN, NOP_INSN_SIZE): Handle insn32 mode. (options): Add OPTION_INSN32 and OPTION_NO_INSN32 enum values. (md_longopts): Add "minsn32" and "mno-insn32" options. (is_size_valid): Handle insn32 mode. (md_assemble): Pass instruction string down to macro. (brk_fmt): Add second dimension and insn32 mode initializers. (mfhl_fmt): Likewise. (BRK_FMT, MFHL_FMT): Handle insn32 mode. (macro_build) <'c'>: Handle microMIPS 32-bit BREAK encoding. (macro_build_jalr, move_register): Handle insn32 mode. (macro_build_branch_rs): Likewise. (macro): Handle insn32 mode. <M_JRADDIUSP>, <M_JRC>, <M_MOVEP>: New cases. (mips_ip): Handle insn32 mode. (md_parse_option): Handle OPTION_INSN32 and OPTION_NO_INSN32. (s_mipsset): Handle "insn32" and "noinsn32" pseudo-ops. (mips_handle_align): Handle insn32 mode. (md_show_usage): Add -minsn32 and -mno-insn32. * doc/as.texinfo (Target MIPS options): Add -minsn32 and -mno-insn32 options. (-minsn32, -mno-insn32): New options. * doc/c-mips.texi (MIPS Opts): Add -minsn32 and -mno-insn32 options. (MIPS assembly options): New node. Document .set insn32 and .set noinsn32. (MIPS-Dependent): List the new node. gas/testsuite/ * gas/mips/micromips-insn32.d: New test. * gas/mips/micromips-noinsn32.d: Likewise. * gas/mips/micromips.l: Rename to... * gas/mips/micromips-warn.l: ... this. * gas/mips/micromips.d: Update accordingly. * gas/mips/micromips-trap.d: Likewise. * gas/mips/micromips.l: New list test. * gas/mips/micromips.s: Add conditionals. * gas/mips/mips.exp: Run the new tests. include/opcode/ * mips.h: Add M_JRADDIUSP, M_JRC and M_MOVEP anonymous enum values. ld/ * emultempl/mipself.em (insn32): New variable. (mips_create_output_section_statements): Handle insn32 mode. (PARSE_AND_LIST_PROLOGUE): New macro. (PARSE_AND_LIST_LONGOPTS): Likewise. (PARSE_AND_LIST_OPTIONS): Likewise. * gen-doc.texi: Set MIPS. * ld.texinfo: Likewise. (Options specific to MIPS targets): New section. (ld and MIPS family): New node. (Top, Machine Dependent): List the new node. opcodes/ * micromips-opc.c (micromips_opcodes): Add "jraddiusp", "jrc" and "movep" macros.
2013-06-24 bfd/Maciej W. Rozycki2-23/+67
* elfxx-mips.h (_bfd_mips_elf_get_synthetic_symtab): New prototype. * elf32-mips.c (elf_backend_plt_sym_val): Remove macro. (bfd_elf32_get_synthetic_symtab): New macro. * elfxx-mips.c (plt_entry): New structure. (mips_elf_link_hash_entry): Add use_plt_entry member. (mips_elf_link_hash_table): Rename plt_entry_size member to plt_mips_entry_size. Add plt_comp_entry_size, plt_mips_offset, plt_comp_offset, plt_got_index entries and plt_header_is_comp members. (STUB_LW_MICROMIPS, STUB_MOVE_MICROMIPS): New macros. (STUB_LUI_MICROMIPS, STUB_JALR_MICROMIPS): Likewise. (STUB_ORI_MICROMIPS, STUB_LI16U_MICROMIPS): Likewise. (STUB_LI16S_MICROMIPS): Likewise. (MICROMIPS_FUNCTION_STUB_NORMAL_SIZE): Likewise. (MICROMIPS_FUNCTION_STUB_BIG_SIZE): Likewise. (micromips_o32_exec_plt0_entry): New variable. (mips16_o32_exec_plt_entry): Likewise. (micromips_o32_exec_plt_entry): Likewise. (mips_elf_link_hash_newfunc): Initialize use_plt_entry. (mips_elf_output_extsym): Update to use gotplt_union's plist member rather than offset. (mips_elf_gotplt_index): Likewise. Remove the VxWorks restriction. Use MIPS_ELF_GOT_SIZE to calculate GOT address. (mips_elf_count_got_symbols): Update to use gotplt_union's plist member rather than offset. (mips_elf_calculate_relocation): Handle MIPS16/microMIPS PLT entries. (_bfd_mips_elf_create_dynamic_sections): Don't set PLT sizes here. (mips_elf_make_plt_record): New function. (_bfd_mips_elf_check_relocs): Update comment. Record occurences of JAL relocations that might need a PLT entry. (_bfd_mips_elf_adjust_dynamic_symbol): Update to use gotplt_union's plist member rather than offset. Set individual PLT entry sizes here. Handle MIPS16/microMIPS PLT entries. Don't set the symbol's value in the symbol table for PLT references here. Don't set the PLT or PLT GOT section sizes here. (mips_elf_estimate_stub_size): Handle microMIPS stubs. (mips_elf_allocate_lazy_stub): Likewise. (mips_elf_lay_out_lazy_stubs): Likewise. Define a _MIPS_STUBS_ magic symbol. (mips_elf_set_plt_sym_value): New function. (_bfd_mips_elf_size_dynamic_sections): Set PLT header size and PLT and PLT GOT section sizes here. Set the symbol values in the symbol table for PLT references here. Handle microMIPS annotation of the _PROCEDURE_LINKAGE_TABLE_ magic symbol. (_bfd_mips_elf_finish_dynamic_symbol): Update to use gotplt_union's plist member rather than offset. Handle MIPS16/microMIPS PLT entries. Handle microMIPS stubs. (_bfd_mips_vxworks_finish_dynamic_symbol): Update to use gotplt_union's plist member rather than offset. Use MIPS_ELF_GOT_SIZE to calculate GOT address. (mips_finish_exec_plt): Handle microMIPS PLT. Return status. (_bfd_mips_elf_finish_dynamic_sections): Handle result from mips_finish_exec_plt. (_bfd_mips_elf_link_hash_table_create): Update to use gotplt_union's plist member rather than offset. (_bfd_mips_elf_get_synthetic_symtab): New function. include/elf/ * mips.h (ELF_ST_IS_MIPS_PLT): Respect STO_MIPS16 setting. (ELF_ST_SET_MIPS_PLT): Likewise. gdb/ * mips-tdep.c (mips_elf_make_msymbol_special): Handle MIPS16 and microMIPS synthetic symbols. ld/ * emulparams/elf32btsmip.sh: Arrange for .got.plt to be placed as close to .plt as possible. * scripttempl/elf.sc: Handle $INITIAL_READWRITE_SECTIONS and $PLT_NEXT_DATA variables. ld/testsuite/ * ld-mips-elf/jalx-2.dd: Update for microMIPS PLT support. * ld-mips-elf/pic-and-nonpic-3a.dd: Update for the _MIPS_STUBS_ magic symbol. * ld-mips-elf/pic-and-nonpic-3b.dd: Likewise. * ld-mips-elf/pic-and-nonpic-6-n32.dd: Likewise. * ld-mips-elf/pic-and-nonpic-6-n64.dd: Likewise. * ld-mips-elf/pic-and-nonpic-6-o32.dd: Likewise. * ld-mips-elf/stub-dynsym-1-10000.d: Likewise. * ld-mips-elf/stub-dynsym-1-2fe80.d: Likewise. * ld-mips-elf/stub-dynsym-1-7fff.d: Likewise. * ld-mips-elf/stub-dynsym-1-8000.d: Likewise. * ld-mips-elf/stub-dynsym-1-fff0.d: Likewise. * ld-mips-elf/tlslib-o32.d: Likewise. opcodes/ * mips-dis.c (is_mips16_plt_tail): New function. (print_insn_mips16): Handle MIPS16 PLT entry's GOT slot address word. (is_compressed_mode_p): Handle MIPS16/microMIPS PLT entries.
2013-06-21 * msp430-decode.opc: New.Nick Clifton9-113/+5264
* msp430-decode.c: New/generated. * Makefile.am (TARGET_LIBOPCODES_CFILES): Add msp430-decode.c. (MAINTAINER_CLEANFILES): Likewise. Add rule to build msp430-decode.c frommsp430decode.opc using the opc2c program. * Makefile.in: Regenerate. * configure.in: Add msp430-decode.lo to msp430 architecture files. * configure: Regenerate. * msp430-decode.h: New.
2013-06-20bfd/Yufeng Zhang2-5/+6
* bfd-in.h (bfd_elf64_aarch64_set_options): Add 'extern'. * bfd-in2.h: Re-generated. * elf64-aarch64.c (RELOC_SECTION): Removed. (SWAP_RELOC_IN, SWAP_RELOC_OUT): Ditto. (AARCH64_ELF_OS_ABI_VERSION): Ditto. (elf64_aarch64_link_hash_traverse): Ditto. (elf64_aarch64_size_stubs): Change 'Aarch64' to 'AArch64' in the comment. opcodes/ * aarch64-dis.c (EMBEDDED_ENV): Remove the check on it. (SYMTAB_AVAILABLE): Removed. (#include "elf/aarch64.h): Ditto.
2013-06-172013-06-17 Catherine Moore <clm@codesourcery.com>Catherine Moore4-4/+141
Maciej W. Rozycki <macro@codesourcery.com> Chao-Ying Fu <fu@mips.com> gas/testsuite/ * gas/mips/mips.exp: Run new tests. * gas/mips/eva.d: New. * gas/mips/eva.s: New. * gas/mips/micromips@eva.d: New. gas/ * config/tc-mips.c (mips_set_options): Add ase_eva. (mips_set_options mips_opts): Add ase_eva. (file_ase_eva): Declare. (ISA_SUPPORTS_EVA_ASE): Define. (IS_SEXT_9BIT_NUM): Define. (MIPS_CPU_ASE_EVA): Define. (is_opcode_valid): Add support for ase_eva. (macro_build): Likewise. (macro): Likewise. (validate_mips_insn): Likewise. (validate_micromips_insn): Likewise. (mips_ip): Likewise. (options): Add OPTION_EVA and OPTION_NO_EVA. (md_longopts): Add -meva and -mno-eva. (md_parse_option): Process new options. (mips_after_parse_args): Check for valid EVA combinations. (s_mipsset): Likewise. include/ * opcode/mips.h (OP_SH_EVAOFFSET): Define. (OP_MASK_EVAOFFSET): Define. (INSN_ASE_MASK): Delete. (ASE_EVA): Define. (M_CACHEE_AB, M_CACHEE_OB): New. (M_LBE_OB, M_LBE_AB): New. (M_LBUE_OB, M_LBUE_AB): New. (M_LHE_OB, M_LHE_AB): New. (M_LHUE_OB, M_LHUE_AB): New. (M_LLE_AB, M_LLE_OB): New. (M_LWE_OB, M_LWE_AB): New. (M_LWLE_AB, M_LWLE_OB): New. (M_LWRE_AB, M_LWRE_OB): New. (M_PREFE_AB, M_PREFE_OB): New. (M_SCE_AB, M_SCE_OB): New. (M_SBE_OB, M_SBE_AB): New. (M_SHE_OB, M_SHE_AB): New. (M_SWE_OB, M_SWE_AB): New. (M_SWLE_AB, M_SWLE_OB): New. (M_SWRE_AB, M_SWRE_OB): New. (MICROMIPSOP_SH_EVAOFFSET): Define. (MICROMIPSOP_MASK_EVAOFFSET): Define. opcodes/ * micromips-opc.c (EVA): Define. (TLBINV): Define. (micromips_opcodes): Add EVA opcodes. * mips-dis.c (mips_arch_choices): Update for ASE_EVA. (print_insn_args): Handle EVA offsets. (print_insn_micromips): Likewise. * mips-opc.c (EVA): Define. (TLBINV): Define. (mips_builtin_opcodes): Add EVA opcodes.
2013-06-17 * Makefile.am (mips-opc.lo): Add rules to create automaticAlan Modra3-6/+58
dependency files. Pass archdefs. (micromips-opc.lo, mips16-opc.lo): Likewise. * Makefile.in: Regenerate.
2013-06-14* rx-decode.opc (rx_decode_opcode): Bit operations onDJ Delorie3-81/+103
registers are 32-bit operations, not 8-bit operations. * rx-decode.c: Regenerate.
generated by cgit v1.1 at 2024-12-02 11:11:42 +0000