aboutsummaryrefslogtreecommitdiff
path: root/opcodes
AgeCommit message (Collapse)AuthorFilesLines
2019-07-01x86: drop Vec_Imm4Jan Beulich6-9985/+9983
It is pretty wasteful to have a per-operand flag which is used in exactly 4 cases. It can be relatively easily replaced, and by doing so I've actually found some dead code to remove at the same time (there's no case of ImmExt set at the same time as Vec_Imm4).
2019-07-01x86: limit ImmExt abuseJan Beulich3-126/+136
In quite a few cases ImmExt gets used when there's not really any immediate, but rather a degenerate ModR/M byte. ENCL{S,U} show how this case is supposed to be dealt with. Eliminate most abuses, leaving in place (for now) only ones where process_immext() is involved.
2019-07-01x86: optimize AND/OR with twice the same registerJan Beulich3-4/+10
It seems to be not uncommon for people to use AND or OR in this form for just setting the status flags. TEST, which doesn't write to any register other than EFLAGS, ought to be preferred. Make the change only for -O2 and above though, at least for now.
2019-07-01x86-64: optimize certain commutative VEX-encoded insnsJan Beulich3-334/+371
When they're in the 0F opcode space, swapping their source operands may allow switching from 3-byte to 2-byte VEX prefix encoding. Note that NaN behavior precludes us doing so for many packed and scalar floating point insns; such an optimization would need to be done by the compiler instead in this case, when it knows that NaN-s have undefined behavior anyway. While for explicitly specified AVX/AVX2 insns the optimization (for now at least) gets done only for -O2 and -Os, it is utilized by default in SSE2AVX mode, as there we're re-writing the programmer's specified insns anyway. Rather than introducing a new attribute flag, the change re-uses one which so far was meaningful only for EVEX-encoded insns.
2019-07-01x86: optimize EVEX packed integer logical instructionsJan Beulich3-8/+14
As long as there's no write mask as well as no broadcast, and as long as the scaled Disp8 wouldn't result in a shorter EVEX encoding, encode VPAND{D,Q}, VPANDN{D,Q}, VPOR{D,Q}, and VPXOR{D,Q} acting on only the lower 16 XMM/YMM registers using their VEX equivalents with -O1. Also take the opportunity and avoid looping twice over all operands when dealing with memory-with-displacement ones.
2019-07-01x86: add missing pseudo ops for VPCLMULQDQ ISA extensionJan Beulich4-1/+168
While the ISA extensions doc suggests them to be made available just like the SDM does for the PCLMULQDQ ISA extension, these weren't added when supposrt for the new extension was introduced. Also make sure the 64-bit non-AVX512 test actually tests VEX encodings, not EVEX ones.
2019-07-01x86: drop bogus Disp8MemShift attributesJan Beulich3-6/+12
In commit dc821c5f9a ("x86: replace Reg8, Reg16, Reg32, and Reg64") I apparently blindly copied the original register/memory templates into separate ones, in particular without removing the Disp8MemShift which are applicable to templates with memory operands only.
2019-07-01x86: remove ModRM.mod decoding layer from AVX512F VMOVS{S,D}Jan Beulich5-63/+35
Just like their AVX counterparts they can utilize XMVexScalar / EXdVexScalarS / EXqVexScalarS taking care of dropping the middle operand for their memory forms.
2019-07-01x86: drop a few dead macrosJan Beulich2-5/+5
2019-06-27i386: Check vector length for scatter/gather prefetch instructionsH.J. Lu5-12/+132
Since not all vector lengths are supported by scatter/gather prefetch instructions, decode them only with supported vector lengths. gas/ PR binutils/24719 * testsuite/gas/i386/disassem.s: Add test for vgatherpf0dps with invalid vector length. * testsuite/gas/i386/x86-64-disassem.s: Likewise. * testsuite/gas/i386/disassem.d: Updated. * testsuite/gas/i386/x86-64-disassem.d: Likewise. opcodes/ PR binutils/24719 * i386-dis-evex-len.h: Add EVEX_LEN_0F38C6_REG_1_PREFIX_2, EVEX_LEN_0F38C6_REG_2_PREFIX_2, EVEX_LEN_0F38C6_REG_5_PREFIX_2, EVEX_LEN_0F38C6_REG_6_PREFIX_2, EVEX_LEN_0F38C7_R_1_P_2_W_0, EVEX_LEN_0F38C7_R_1_P_2_W_1, EVEX_LEN_0F38C7_R_2_P_2_W_0, EVEX_LEN_0F38C7_R_2_P_2_W_1, EVEX_LEN_0F38C7_R_5_P_2_W_0, EVEX_LEN_0F38C7_R_5_P_2_W_1, EVEX_LEN_0F38C7_R_6_P_2_W_0 and EVEX_LEN_0F38C7_R_6_P_2_W_1. * i386-dis-evex-prefix.h: Update PREFIX_EVEX_0F38C6_REG_1, PREFIX_EVEX_0F38C6_REG_2, PREFIX_EVEX_0F38C6_REG_5 and PREFIX_EVEX_0F38C6_REG_6 entries. * i386-dis-evex-w.h: Update EVEX_W_0F38C7_R_1_P_2, EVEX_W_0F38C7_R_2_P_2, EVEX_W_0F38C7_R_5_P_2 and EVEX_W_0F38C7_R_6_P_2 entries. * i386-dis.c: Add EVEX_LEN_0F38C6_REG_1_PREFIX_2, EVEX_LEN_0F38C6_REG_2_PREFIX_2, EVEX_LEN_0F38C6_REG_5_PREFIX_2, EVEX_LEN_0F38C6_REG_6_PREFIX_2, EVEX_LEN_0F38C7_R_1_P_2_W_0, EVEX_LEN_0F38C7_R_1_P_2_W_1, EVEX_LEN_0F38C7_R_2_P_2_W_0, EVEX_LEN_0F38C7_R_2_P_2_W_1, EVEX_LEN_0F38C7_R_5_P_2_W_0, EVEX_LEN_0F38C7_R_5_P_2_W_1, EVEX_LEN_0F38C7_R_6_P_2_W_0 and EVEX_LEN_0F38C7_R_6_P_2_W_1 enums.
2019-06-27x86: fold AVX scalar to/from int conversion insnsJan Beulich2-48/+15
There's no point doing a separate decode of the VEX.L bit - both decoded forms are identical.
2019-06-27x86: allow VEX et al encodings in 16-bit (protected) modeJan Beulich2-33/+42
These encodings aren't valid in real and VM86 modes, but they are very well usable in 16-bit protected mode. A few adjustments in the disassembler tables are needed where Ev or Gv were wrongly used. Additionally an adjustment is needed to avoid printing "addr32" when that's already recognizable by the use of %eiz. Furthermore the Iq operand template was wrong for XOP:0Ah encoding insns: They're having a uniform 32-bit immediate. Drop Iq and introduce Id instead. Clone a few existing test cases to exercise assembler and disassembler.
2019-06-26RISC-V: Make objdump disassembly work right for binary files.Jim Wilson2-2/+12
Without the ELF header to set info->endian, it ends up as BFD_UNKNOWN_ENDIAN which gets printed as big-endian. But RISC-V instructions are always little endian, so we can set endian_code correctly, and then set display_endian from that. This is similar to how the aarch64 support works, but without the support for constant pools, as we don't have that on RISC-V. opcodes/ PR binutils/24739 * riscv-dis.c (riscv_disasemble_insn): Set info->endian_code. Set info->display_endian to info->endian_code.
2019-06-25x86: correct / adjust debug printingJan Beulich3-14/+29
For quite some time we've been using combinations of bits for specifying various registers in operands and templates. I think it was Alan who had indicated that likely the debug printing would need adjustment as a result. Here we go. Accumulator handling for GPRs gets changed to match that for FPU regs. For this to work, OPERAND_TYPE_ACC{32,64} get repurposed, with their original uses replaced by direct checks of the two bits of interest, which is cheaper than operand_type_equal() invocations. For SIMD registers nothing similar appears to be needed, as respective operands get stripped from the (copy of the) template before pt() is reached. The type change on pi() is to silence a compiler diagnostic. Arguably its other parameter could also be const-qualified.
2019-06-25x86: drop dqa_modeJan Beulich4-24/+15
I assume this mode was needed when EVEX.W handling wasn't really correct yet for other than 64-bit mode. It's clearly not needed anymore. Its elimination also allows dropping the EVEX.W split of VCVT{,U}SI2SS. (For the record, the dropped mode would have been wrong if used in any table entry not already guaranteeing EVEX.W=1.)
2019-06-25x86: simplify OP_I64()Jan Beulich2-40/+8
The only meaningful difference from OP_I() is the handling of the VEX.W=1 case in 64-bit mode for bytemode being v_mode. Funnel everything else into OP_I(), and drop no longer needed local variables.
2019-06-25x86: fix (dis)assembly of certain SSE2 insns in 16-bit modeJan Beulich4-9/+17
MOVNTI was wrongly assembled with a 66h prefix. Add IgnoreSize to address this. It and the scalar to/from integer conversion insns also were also wrongly using Ev / Gv, leading to 16-bit register names being printed when 32-bit ones were meant. Clone the 32-bit SSE2 test to cover both assembler and disassembler.
2019-06-25x86-64: also optimize ANDQ with immediate fitting in 7 bitsJan Beulich3-2/+7
The same reasoning applies here as did/does for immediates fitting in 31 bits.
2019-06-21i386: Break i386-dis-evex.h into small filesH.J. Lu8-3486/+3472
Break i386-dis-evex.h into small files such that each file is included just once. * i386-dis-evex.h: Break into ... * i386-dis-evex-len.h: New file. * i386-dis-evex-mod.h: Likewise. * i386-dis-evex-prefix.h: Likewise. * i386-dis-evex-reg.h: Likewise. * i386-dis-evex-w.h: Likewise. * i386-dis.c: Include i386-dis-evex-reg.h, i386-dis-evex-prefix.h, i386-dis-evex.h, i386-dis-evex-len.h, i386-dis-evex-w.h and i386-dis-evex-mod.h.
2019-06-19i386: Check vector length for EVEX broadcast instructionsH.J. Lu3-10/+113
Since not all vector lengths are supported by EVEX broadcast instructions, decode them only with supported vector lengths. gas/ PR binutils/24700 * testsuite/gas/i386/disassem.s: Add test for vbroadcasti32x8 with invalid vector length. * testsuite/gas/i386/x86-64-disassem.s: Likewise. * testsuite/gas/i386/disassem.d: Updated. * testsuite/gas/i386/x86-64-disassem.d: Likewise. opcodes/ PR binutils/24700 * i386-dis-evex.h (evex_table): Update EVEX_W_0F3819_P_2, EVEX_W_0F381A_P_2, EVEX_W_0F381B_P_2, EVEX_W_0F385A_P_2 and EVEX_W_0F385B_P_2. (evex_len_table): Add EVEX_LEN_0F3819_P_2_W_0, EVEX_LEN_0F3819_P_2_W_1, EVEX_LEN_0F381A_P_2_W_0, EVEX_LEN_0F381A_P_2_W_1, EVEX_LEN_0F381B_P_2_W_0, EVEX_LEN_0F381B_P_2_W_1, EVEX_LEN_0F385A_P_2_W_0, EVEX_LEN_0F385A_P_2_W_1, EVEX_LEN_0F385B_P_2_W_0 and EVEX_LEN_0F385B_P_2_W_1. * i386-dis.c (EVEX_LEN_0F3819_P_2_W_0): New enum. (EVEX_LEN_0F3819_P_2_W_1): Likewise. (EVEX_LEN_0F381A_P_2_W_0): Likewise. (EVEX_LEN_0F381A_P_2_W_1): Likewise. (EVEX_LEN_0F381B_P_2_W_0): Likewise. (EVEX_LEN_0F381B_P_2_W_1): Likewise. (EVEX_LEN_0F385A_P_2_W_0): Likewise. (EVEX_LEN_0F385A_P_2_W_1): Likewise. (EVEX_LEN_0F385B_P_2_W_0): Likewise. (EVEX_LEN_0F385B_P_2_W_1): Likewise.
2019-06-17i386: Check vector length for vshufXXX/vinsertXXX/vextractXXXH.J. Lu3-13/+135
Since not all vector lengths are supported by vshufXXX, vinsertXXX and vextractXXX, decode them only with supported vector lengths. gas/ PR binutils/24691 * testsuite/gas/i386/disassem.s: Add test for vshuff32x4 with invalid vector length. * testsuite/gas/i386/x86-64-disassem.s: Likewise. * testsuite/gas/i386/disassem.d: Updated. * testsuite/gas/i386/x86-64-disassem.d: Likewise. opcodes/ PR binutils/24691 * i386-dis-evex.h (evex_table): Update EVEX_W_0F3A23_P_2, EVEX_W_0F3A38_P_2, EVEX_W_0F3A39_P_2, EVEX_W_0F3A3A_P_2, EVEX_W_0F3A3B_P_2 and EVEX_W_0F3A43_P_2. (evex_len_table): Add EVEX_LEN_0F3A23_P_2_W_0, EVEX_LEN_0F3A23_P_2_W_1, EVEX_LEN_0F3A38_P_2_W_0, EVEX_LEN_0F3A38_P_2_W_1, EVEX_LEN_0F3A39_P_2_W_0, EVEX_LEN_0F3A39_P_2_W_1, EVEX_LEN_0F3A3A_P_2_W_0, EVEX_LEN_0F3A3A_P_2_W_1, EVEX_LEN_0F3A3B_P_2_W_0, EVEX_LEN_0F3A3B_P_2_W_1, EVEX_LEN_0F3A43_P_2_W_0 and EVEX_LEN_0F3A43_P_2_W_1. * i386-dis.c (EVEX_LEN_0F3A23_P_2_W_0): New enum. (EVEX_LEN_0F3A23_P_2_W_1): Likewise. (EVEX_LEN_0F3A38_P_2_W_0): Likewise. (EVEX_LEN_0F3A38_P_2_W_1): Likewise. (EVEX_LEN_0F3A39_P_2_W_0): Likewise. (EVEX_LEN_0F3A39_P_2_W_1): Likewise. (EVEX_LEN_0F3A3A_P_2_W_0): Likewise. (EVEX_LEN_0F3A3A_P_2_W_1): Likewise. (EVEX_LEN_0F3A3B_P_2_W_0): Likewise. (EVEX_LEN_0F3A3B_P_2_W_1): Likewise. (EVEX_LEN_0F3A43_P_2_W_0): Likewise. (EVEX_LEN_0F3A43_P_2_W_1): Likewise.
2019-06-14Updated French translation for the opcodes subdirectory.Nick Clifton2-78/+86
* po/fr.po; Updated French translation.
2019-06-13opcodes/or1k: Regenerate opcodesStafford Horne9-273/+1195
This picks up changes for: - new orfpx64a32 spec additions - new unordered instructions - symbol and documentation updates opcodes/ChangeLog: * or1k-asm.c: Regenerated. * or1k-desc.c: Regenerated. * or1k-desc.h: Regenerated. * or1k-dis.c: Regenerated. * or1k-ibld.c: Regenerated. * or1k-opc.c: Regenerated. * or1k-opc.h: Regenerated. * or1k-opinst.c: Regenerated.
2019-06-12Add missing ChangeLog entriesPeter Bergner1-0/+4
2019-06-12Remove the ldmx mnemonic that never made it into POWER9.Peter Bergner1-2/+0
opcodes/ * ppc-opc.c (powerpc_opcodes) <ldmx>: Delete mnemonic. gas/ * testsuite/gas/ppc/power9.d: Delete ldmx tests. * testsuite/gas/ppc/power9.s: Likewise.
2019-06-05i386: Check vector length for EVEX vextractfXX and vinsertfXXH.J. Lu3-9/+92
Since not all vector lengths are supported by EVEX vextractfXX and vinsertfXX, decode them only with supported vector lengths. gas/ PR binutils/24633 * testsuite/gas/i386/disassem.s: Add tests for invalid vector lengths for EVEX vextractfXX and vinsertfXX. * testsuite/gas/i386/x86-64-disassem.s: Likewise. * testsuite/gas/i386/disassem.d: Updated. * testsuite/gas/i386/x86-64-disassem.d: Likewise. opcodes/ PR binutils/24633 * i386-dis-evex.h (evex_table): Update EVEX_W_0F3A18_P_2, EVEX_W_0F3A19_P_2, EVEX_W_0F3A1A_P_2 and EVEX_W_0F3A1B_P_2. (evex_len_table): EVEX_LEN_0F3A18_P_2_W_0, EVEX_LEN_0F3A18_P_2_W_1, EVEX_LEN_0F3A19_P_2_W_0, EVEX_LEN_0F3A19_P_2_W_1, EVEX_LEN_0F3A1A_P_2_W_0, EVEX_LEN_0F3A1A_P_2_W_1, EVEX_LEN_0F3A1B_P_2_W_0, EVEX_LEN_0F3A1B_P_2_W_1. * i386-dis.c (EVEX_LEN_0F3A18_P_2_W_0): New enum. (EVEX_LEN_0F3A18_P_2_W_1): Likewise. (EVEX_LEN_0F3A19_P_2_W_0): Likewise. (EVEX_LEN_0F3A19_P_2_W_1): Likewise. (EVEX_LEN_0F3A1A_P_2_W_0): Likewise. (EVEX_LEN_0F3A1A_P_2_W_1): Likewise. (EVEX_LEN_0F3A1B_P_2_W_0): Likewise. (EVEX_LEN_0F3A1B_P_2_W_1): Likewise.
2019-06-04i386: Check for reserved VEX.vvvv and EVEX.vvvvH.J. Lu2-10/+27
If VEX.vvvv and EVEX.vvvv are reserved, they must be all 1s, which are all 0s in inverted form. Add check for unused VEX.vvvv and EVEX.vvvv when disassembling VEX and EVEX instructions. gas/ PR binutils/24626 * testsuite/gas/i386/disassem.s: Add tests for reserved VEX.vvvv and EVEX.vvvv. * testsuite/gas/i386/x86-64-disassem.s: Likewise. * testsuite/gas/i386/disassem.d: Updated. * testsuite/gas/i386/x86-64-disassem.d: Likewise. opcodes/ PR binutils/24626 * i386-dis.c (print_insn): Check for unused VEX.vvvv and EVEX.vvvv when disassembling VEX and EVEX instructions. (OP_VEX): Set vex.register_specifier to 0 after readding vex.register_specifier. (OP_Vex_2src_1): Likewise. (OP_Vex_2src_2): Likewise. (OP_LWP_E): Likewise. (OP_EX_Vex): Don't check vex.register_specifier. (OP_XMM_Vex): Likewise.
2019-06-04Enable Intel AVX512_VP2INTERSECT insnH.J. Lu8-4142/+4240
This patch enables support for VP2INTERSECT in binutils. Please refer to https://software.intel.com/sites/default/files/managed/c5/15/architecture-instruction-set-extensions-programming-reference.pdf for VP2INTERSECT details. Make check-gas is ok. gas/ 2019-06-04 Igor Tsimbalist <igor.v.tsimbalist@intel.com> Lili Cui <lili.cui@intel.com> * config/tc-i386.c (cpu_arch): Add .avx512_vp2intersect. (cpu_noarch): Likewise. * doc/c-i386.texi: Document avx512_vp2intersect. * testsuite/gas/i386/i386.exp: Run vp2intersect tests. * testsuite/gas/i386/vp2intersect-intel.d: New test. * testsuite/gas/i386/vp2intersect.d: Likewise. * testsuite/gas/i386/vp2intersect.s: Likewise. * testsuite/gas/i386/vp2intersect-inval-bcast.l: Likewise. * testsuite/gas/i386/vp2intersect-inval-bcast.s: Likewise. * testsuite/gas/i386/x86-64-vp2intersect-intel.d: Likewise. * testsuite/gas/i386/x86-64-vp2intersect.d: Likewise. * testsuite/gas/i386/x86-64-vp2intersect.s: Likewise. * testsuite/gas/i386/x86-64-vp2intersect-inval-bcast.l: Likewise. * testsuite/gas/i386/x86-64-vp2intersect-inval-bcast.s: Likewise. opcodes/ 2019-06-04 Igor Tsimbalist <igor.v.tsimbalist@intel.com> Lili Cui <lili.cui@intel.com> * i386-dis.c (enum): Add PREFIX_EVEX_0F3868, EVEX_W_0F3868_P_3. * i386-dis-evex.h (evex_table): Add AVX512_VP2INTERSECT instructions. * i386-gen.c (cpu_flag_init): Add CPU_AVX512_VP2INTERSECT_FLAGS, CPU_ANY_AVX512_VP2INTERSECT_FLAGS. (cpu_flags): Add CpuAVX512_VP2INTERSECT. * i386-opc.h (enum): Add CpuAVX512_VP2INTERSECT. (i386_cpu_flags): Add cpuavx512_vp2intersect. * i386-opc.tbl: Add AVX512_VP2INTERSECT insns. * i386-init.h: Regenerated. * i386-tbl.h: Likewise.
2019-06-04Add support for Intel ENQCMD[S] instructionsH.J. Lu7-4064/+4190
This patch enables support for ENQCMD[S] in binutils. Please refer to https://software.intel.com/sites/default/files/managed/c5/15/architecture-instruction-set-extensions-programming-reference.pdf for ENQCMD[S] details. Make check-gas is ok. gas/ChangeLog: 2019-06-04 Xuepeng Guo <xuepeng.guo@intel.com> Lili Cui <lili.cui@intel.com> * doc/c-i386.texi: Document enqcmd. * testsuite/gas/i386/enqcmd-intel.d: New file. * testsuite/gas/i386/enqcmd-inval.l: Likewise. * testsuite/gas/i386/enqcmd-inval.s: Likewise. * testsuite/gas/i386/enqcmd.d: Likewise. * testsuite/gas/i386/enqcmd.s: Likewise. * testsuite/gas/i386/x86-64-enqcmd-intel.d: Likewise. * testsuite/gas/i386/x86-64-enqcmd-inval.l: Likewise. * testsuite/gas/i386/x86-64-enqcmd-inval.s: Likewise. * testsuite/gas/i386/x86-64-enqcmd.d: Likewise. * testsuite/gas/i386/x86-64-enqcmd.s: Likewise. * testsuite/gas/i386/i386.exp: Run enqcmd-intel, enqcmd-inval, enqcmd, x86-64-enqcmd-intel, x86-64-enqcmd-inval, and x86-64-enqcmd. opcodes/ChangeLog: 2019-06-04 Xuepeng Guo <xuepeng.guo@intel.com> Lili Cui <lili.cui@intel.com> * i386-dis.c (enum): Add MOD_0F38F8_PREFIX_1 and MOD_0F38F8_PREFIX_3. (prefix_table): New instructions (see prefix above). (mod_table): New instructions (see prefix above). * i386-gen.c (cpu_flag_init): Add entries for enqcmd. (cpu_flags): Add a bitfield for enqmcd. * i386-init.h: Regenerated. * i386-opc.h (enum): Add CpuENQCMD. (i386_cpu_flags): Add a bitfield for cpuenqcmd. * i386-opc.tbl: Add enqcmd and enqcmds instructions. * i386-init.h: Regenerated. * i386-tbl.h: Regenerated.
2019-06-04Remove an unnecessary set of parentheses in the arm-dis.c source file.Alan Hayward2-1/+5
* arm-dis.c (is_mve_unpredictable): Remove spurious paranthesis.
2019-06-03Don't waste space in prefix_opcd_indicesAlan Modra2-1/+5
* ppc-dis.c (prefix_opcd_indices): Correct size.
2019-05-28x86: Add CheckRegSize to AVX512_BF16 instructions with Disp8ShiftVLH.J. Lu3-4/+11
For AVX512 instructions with Disp8ShiftVL and Broadcast, we may need to add CheckRegSize to check if broadcast matches the destination register size. gas/ PR gas/24625 * testsuite/gas/i386/inval-avx512f.s: Add tests for AVX512_BF16 instructions with invalid broadcast. * testsuite/gas/i386/x86-64-inval-avx512f.s: Likewise. * testsuite/gas/i386/inval-avx512f.l: Updated. * testsuite/gas/i386/x86-64-inval-avx512f.l: Likewise. opcodes/ PR gas/24625 * i386-opc.tbl: Add CheckRegSize to AVX512_BF16 instructions with Disp8ShiftVL. * i386-tbl.h: Regenerated.
2019-05-24Regen POTFILES for bpfAlan Modra2-0/+11
bfd/ * po/SRC-POTFILES.in: Regenerate. gas/ * po/POTFILES.in: Regenerate. ld/ * po/BLD-POTFILES.in: Regenerate. opcodes/ * po/POTFILES.in: Regenerate.
2019-05-24PowerPC D-form prefixed loads and storesPeter Bergner2-4/+197
opcodes/ * ppc-opc.c (insert_d34, extract_d34, insert_nsi34, extract_nsi34), (insert_pcrel, extract_pcrel, extract_pcrel0): New functions. (extract_esync, extract_raq, extract_tbr, extract_sxl): Comment. (powerpc_operands <D34, SI34, NSI34, PRA0, PRAQ, PCREL, PCREL0, XTOP>): Define and add entries. (P8LS, PMLS, P_D_MASK, P_DRAPCREL_MASK): Define. (prefix_opcodes): Add pli, paddi, pla, psubi, plwz, plbz, pstw, pstb, plhz, plha, psth, plfs, plfd, pstfs, pstfd, plq, plxsd, plxssp, pld, plwa, pstxsd, pstxssp, pstxv, pstd, and pstq. gas/ * config/tc-ppc.c (ppc_insert_operand): Only sign extend fields that are 32-bits or smaller. * messages.c (as_internal_value_out_of_range): Do not truncate variables and use BFD_VMA_FMT to print them. * testsuite/gas/ppc/prefix-pcrel.s, * testsuite/gas/ppc/prefix-pcrel.d: New test. * testsuite/gas/ppc/ppc.exp: Run it.
2019-05-24PowerPC add initial -mfuture instruction supportPeter Bergner3-1/+130
This patch adds initial 64-bit insn assembler/disassembler support. The only instruction added is "pnop" along with the automatic aligning of prefix instruction so they do not cross 64-byte boundaries. include/ * dis-asm.h (WIDE_OUTPUT): Define. * opcode/ppc.h (prefix_opcodes, prefix_num_opcodes): Declare. (PPC_OPCODE_POWERXX, PPC_GET_PREFIX, PPC_GET_SUFFIX), (PPC_PREFIX_P, PPC_PREFIX_SEG): Define. opcodes/ * ppc-dis.c (ppc_opts): Add "future" entry. (PREFIX_OPCD_SEGS): Define. (prefix_opcd_indices): New array. (disassemble_init_powerpc): Initialize prefix_opcd_indices. (lookup_prefix): New function. (print_insn_powerpc): Handle 64-bit prefix instructions. * ppc-opc.c (PREFIX_OP, PREFIX_FORM, SUFFIX_MASK, PREFIX_MASK), (PMRR, POWERXX): Define. (prefix_opcodes): New instruction table. (prefix_num_opcodes): New constant. binutils/ * objdump.c (disassemble_bytes): Set WIDE_OUTPUT in flags. gas/ * config/tc-ppc.c (ppc_setup_opcodes): Handle prefix_opcodes. (struct insn_label_list): New. (insn_labels, free_insn_labels): New variables. (ppc_record_label, ppc_clear_labels, ppc_start_line_hook): New funcs. (ppc_frob_label, ppc_new_dot_label): Move functions earlier in file and call ppc_record_label. (md_assemble): Handle 64-bit prefix instructions. Align labels that are on the same line as a prefix instruction. * config/tc-ppc.h (tc_frob_label, ppc_frob_label): Move to later in the file. (md_start_line_hook): Define. (ppc_start_line_hook): Declare. * testsuite/gas/ppc/prefix-align.d, * testsuite/gas/ppc/prefix-align.s: New test. * testsuite/gas/ppc/ppc.exp: Run new test.
2019-05-23opcodes: add support for eBPFJose E. Marchesi14-3/+5837
This patch adds support for the Linux kernel eBPF architecture to the opcodes. The port is based on CGEN. opcodes/ChangeLog: 2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com> * configure.ac (SHARED_DEPENDENCIES): Add case for bfd_bpf_arch. * configure: Regenerated. * Makefile.am: Add rules for the files generated from cpu/bpf.cpu and cpu/bpf.opc. (HFILES): Add bpf-desc.h and bpf-opc.h. (TARGET_LIBOPCODES_CFILES): Add bpf-asm.c, bpf-desc.c, bpf-dis.c, bpf-ibld.c and bpf-opc.c. (BPF_DEPS): Define. * Makefile.in: Regenerated. * disassemble.c (ARCH_bpf): Define. (disassembler): Add case for bfd_arch_bpf. (disassemble_init_for_target): Likewise. (enum epbf_isa_attr): Define. * disassemble.h: extern print_insn_bpf. * bpf-asm.c: Generated. * bpf-opc.h: Likewise. * bpf-opc.c: Likewise. * bpf-ibld.c: Likewise. * bpf-dis.c: Likewise. * bpf-desc.h: Likewise. * bpf-desc.c: Likewise.
2019-05-21[binutils, ARM] <spec_reg> changes for VMRS and VMSR instructionsSudakshina Das2-2/+27
This patch makes changes to the <spec_reg> operand for VMRS and VMSR instructions as per the Armv8.1-M Mainline. New <spec_reg> options to support are: 0b0010: FPSCR_nzcvqc, access to FPSCR condition and saturation flags. 0b1100: VPR, privileged only access to the VPR register. 0b1101: P0, access to VPR.P0 predicate fields 0b1110: FPCXT_NS, enables saving and restoring of Non-secure floating point context. 0b1111: FPCXT_S, enables saving and restoring of Secure floating point context *** gas/ChangeLog *** 2019-05-21 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (parse_operands): Update case OP_RVC to parse p0 and P0. (do_vmrs): Add checks for valid operands with respect to cpu and fpu options. (do_vmsr): Likewise. (reg_names): New reg_names for FPSCR_nzcvqc, VPR, FPCXT_NS and FPCXT_S. * testsuite/gas/arm/armv8_1-m-spec-reg.d: New. * testsuite/gas/arm/armv8_1-m-spec-reg.s: New. * testsuite/gas/arm/armv8_1-m-spec-reg-bad1.d: New. * testsuite/gas/arm/armv8_1-m-spec-reg-bad2.d: New. * testsuite/gas/arm/armv8_1-m-spec-reg-bad3.d: New. * testsuite/gas/arm/armv8_1-m-spec-reg-bad1.l: New. * testsuite/gas/arm/armv8_1-m-spec-reg-bad2.l: New. * testsuite/gas/arm/armv8_1-m-spec-reg-bad3.l: New. * testsuite/gas/arm/vfp1xD.d: Updated to allow new valid values. * testsuite/gas/arm/vfp1xD_t2.d: Likewise. *** opcodes/ChangeLog *** 2019-05-21 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (coprocessor_opcodes): New instructions for VMRS and VMSR with the new operands.
2019-05-21[binutils, Arm] Add support for conditional instructions in Armv8.1-M MainlineSudakshina Das2-0/+99
This patch adds the following instructions which are part of the Armv8.1-M Mainline: CINC CINV CNEG CSINC CSINV CSNEG CSET CSETM CSEL gas/ChangeLog: 2019-05-21 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (TOGGLE_BIT): New. (T16_32_TAB): New entries for cinc, cinv, cneg, csinc, csinv, csneg, cset, csetm and csel. (operand_parse_code): New OP_RR_ZR. (parse_operand): Handle case for OP_RR_ZR. (do_t_cond): New. (insns): New instructions for cinc, cinv, cneg, csinc, csinv, csneg, cset, csetm, csel. * testsuite/gas/arm/armv8_1-m-cond-bad.d: New test. * testsuite/gas/arm/armv8_1-m-cond-bad.l: New test. * testsuite/gas/arm/armv8_1-m-cond-bad.s: New test. * testsuite/gas/arm/armv8_1-m-cond.d: New test. * testsuite/gas/arm/armv8_1-m-cond.s: New test. opcodes/ChangeLog: 2019-05-21 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (enum mve_instructions): New enum for csinc, csinv, csneg, csel, cset, csetm, cinv, cinv and cneg. (mve_opcodes): New instructions as above. (is_mve_encoding_conflict): Add cases for csinc, csinv, csneg and csel. (print_insn_mve): Accept new %<bitfield>c and %<bitfield>C.
2019-05-21[binutils, Arm] Add support for shift instructions in MVESudakshina Das2-0/+194
This patch adds the following instructions which are part of Armv8.1-M MVE: ASRL (imm) ASRL (reg) LSLL (imm) LSLL (reg) LSRL SQRSHRL SRQSHR SQSHLL SQSHL SRSHRL SRSHR UQRSHLL UQRSHL UQSHLL UQSHL URSHLL URSHL *** gas/ChangeLog *** 2019-05-21 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (operand_parse_code): New entries for OP_RRnpcsp_I32 (register or integer operands). (do_mve_scalar_shift): New. (insns): New instructions for asrl, lsll, lsrl, sqrshrl, sqrshr, sqshl sqshll, srshr, srshrl, uqrshll, uqrshl, uqshll, uqshl, urshrl and urshr. * testsuite/gas/arm/mve-shift.d: New. * testsuite/gas/arm/mve-shift.s: New. * testsuite/gas/arm/mve-shift-bad.d: New. * testsuite/gas/arm/mve-shift-bad.s: New. * testsuite/gas/arm/mve-shift-bad.l: New. *** opcodes/ChangeLog *** 2019-05-21 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (emun mve_instructions): Updated for new instructions. (mve_opcodes): New instructions for asrl, lsll, lsrl, sqrshrl, sqrshr, sqshl, sqshll, srshr, srshrl, uqrshll, uqrshl, uqshll, uqshl, urshrl and urshr. (is_mve_okay_in_it): Add new instructions to TRUE list. (is_mve_unpredictable): Add cases for UNPRED_R13 and UNPRED_R15. (print_insn_mve): Updated to accept new %j, %<bitfield>m and %<bitfield>n patterns.
2019-05-21MIPS/gas: Reject $0 as source register for DAUI instructionFaraz Shahbazker2-1/+6
The MIPS64R6 TRM requires that the source register for DAUI not be r0. [1] "MIPS Architecture for Programmers Volume II-A: The MIPS64 Instruction Set Manual", Imagination Technologies Ltd., Document Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical List of Instructions", pp. 67-68. gas/ * testsuite/gas/mips/r6-branch-constraints.s: Rename to ... * testsuite/gas/mips/r6-reg-constraints.s: this and add test case for DAUI. * testsuite/gas/mips/r6-branch-constraints.l: Rename to ... * testsuite/gas/mips/r6-reg-constraints.l: this and add test for DAUI. * testsuite/gas/mips/mips.exp: Rename test from r6-branch-constraints to r6-reg-constraints. opcodes/ * mips-opc.c (mips_builtin_opcodes): Change source register constraint for DAUI.
2019-05-20Updated translations for various binutils subdirectories.Nick Clifton2-584/+977
bfd * po/fr.po: Updated French translation. binutils* po/ca.po: Updated Catalan translation. gprof * po/de.po: Updated German translation. opcodes * po/fr.po: Updated French translation.
2019-05-16[PATCH 56/57][Arm][OBJDUMP] Add support for MVE instructions: vpnot, vpsel, ↵Andre Vieira2-0/+154
vqabs, vqadd, vqsub, vqneg and vrev opcodes/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> Michael Collison <michael.collison@arm.com> * arm-dis.c (thumb32_opcodes): Add new instructions. (enum mve_instructions): Likewise. (enum mve_undefined): Add new reasons. (is_mve_encoding_conflict): Handle new instructions. (is_mve_undefined): Likewise. (is_mve_unpredictable): Likewise. (print_mve_undefined): Likewise. (print_mve_size): Likewise.
2019-05-16[PATCH 55/57][Arm][OBJDUMP] Add support for MVE instructions: vmul, vmulh, ↵Andre Vieira2-0/+83
vrmulh and vneg opcodes/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> Michael Collison <michael.collison@arm.com> * arm-dis.c (thumb32_opcodes): Add new instructions. (enum mve_instructions): Likewise. (is_mve_encoding_conflict): Handle new instructions. (is_mve_undefined): Likewise. (is_mve_unpredictable): Likewise. (print_mve_size): Likewise.
2019-05-16[PATCH 54/57][Arm][OBJDUMP] Add support for MVE instructions: vmax(a), ↵Andre Vieira2-0/+163
vmax(a)v, vmaxnm(a), vmaxnm(a)v, vmin(a), vmin(a)v, vminnm(a), vminnm(a)v and vmla opcodes/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> Michael Collison <michael.collison@arm.com> * arm-dis.c (thumb32_opcodes): Add new instructions. (enum mve_instructions): Likewise. (is_mve_encoding_conflict): Likewise. (is_mve_unpredictable): Likewise. (print_mve_size): Likewise.
2019-05-16[PATCH 53/57][Arm][OBJDUMP] Add support for MVE instructions: vand, vbrsr, ↵Andre Vieira2-0/+76
vcls, vclz and vctp opcodes/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> Michael Collison <michael.collison@arm.com> * arm-dis.c (thumb32_opcodes): Add new instructions. (enum mve_instructions): Likewise. (is_mve_encoding_conflict): Handle new instructions. (is_mve_undefined): Likewise. (is_mve_unpredictable): Likewise. (print_mve_size): Likewise.
2019-05-16[PATCH 52/57][Arm][OBJDUMP] Add support for MVE instructions: vadc, vabav, ↵Andre Vieira2-0/+154
vabd, vabs, vadd, vsbc and vsub opcodes/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> Michael Collison <michael.collison@arm.com> * arm-dis.c (thumb32_opcodes): Add new instructions. (enum mve_instructions): Likewise. (is_mve_encoding_conflict): Handle new instructions. (is_mve_undefined): Likewise. (is_mve_unpredictable): Likewise. (print_mve_size): Likewise. (print_insn_mve): Likewise.
2019-05-16[PATCH 51/57][Arm][OBJDUMP] Add support for MVE instructions: lctp, letp, ↵Andre Vieira2-3/+24
wlstp and dlstp opcodes/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> Michael Collison <michael.collison@arm.com> * arm-dis.c (thumb32_opcodes): Add new instructions. (print_insn_thumb32): Handle new instructions.
2019-05-16[PATCH 50/57][Arm][OBJDUMP] Add support for MVE shift instructionsAndre Vieira2-2/+422
opcodes/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> Michael Collison <michael.collison@arm.com> * arm-dis.c (enum mve_instructions): Add new instructions. (enum mve_undefined): Add new reasons. (is_mve_encoding_conflict): Handle new instructions. (is_mve_undefined): Likewise. (is_mve_unpredictable): Likewise. (print_mve_undefined): Likewise. (print_mve_size): Likewise. (print_mve_shift_n): Likewise. (print_insn_mve): Likewise.
2019-05-16[PATCH 49/57][Arm][OBJDUMP] Add support for MVE complex number instructionsAndre Vieira2-0/+152
opcodes/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> Michael Collison <michael.collison@arm.com> * arm-dis.c (enum mve_instructions): Add new instructions. (is_mve_encoding_conflict): Handle new instructions. (is_mve_unpredictable): Likewise. (print_mve_rotate): Likewise. (print_mve_size): Likewise. (print_insn_mve): Likewise.
2019-05-16[PATCH 48/57][Arm][OBJDUMP] Add support for MVE instructions: vddup, vdwdup, ↵Andre Vieira2-1/+96
vidup and viwdup opcodes/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> Michael Collison <michael.collison@arm.com> * arm-dis.c (enum mve_instructions): Add new instructions. (is_mve_encoding_conflict): Handle new instructions. (is_mve_unpredictable): Likewise. (print_mve_size): Likewise. (print_insn_mve): Likewise.
generated by cgit v1.1 at 2025-03-10 17:38:36 +0000