aboutsummaryrefslogtreecommitdiff
path: root/opcodes
AgeCommit message (Collapse)AuthorFilesLines
2018-07-06Fix SBO bit in disassembly mask for ldrah on AArch64.Tamar Christina2-1/+6
The disassembly mask for ldarh incorrectly didn't mask out bit 20 which is part of the SBO part of the instruction and shouldn't be considered input. This fixes the wrong bit fixing the disassembly of instructions to ldarh and makes the behavior consistent. opcodes/ PR binutils/23242 * aarch64-tbl.h (ldarh): Fix disassembly mask.
2018-07-06Fix the read/write flag for these registers on AArch64Tamar Christina2-5/+11
The previous constraints were based on information already in opcodes and it seems that a few of them were wrong. I have now hand verified the ones changed by the previous patch and corrected where needed. This prevents a warning to be issued when one shouldn't be. opcodes/ PR binutils/23369 * aarch64-opc.c (aarch64_sys_regs): Make read/write csselr_el1, vsesr_el2, osdtrrx_el1, osdtrtx_el1, pmsidr_el1. gas/testsuite/ PR binutils/23369 * gas/aarch64/msr.d (csselr_el1, vsesr_el2, osdtrrx_el1, osdtrtx_el1, pmsidr_el1): New. * gas/aarch64/msr.s: Likewise.
2018-07-02GDB PR tdep/8282: MIPS: Wire in `set disassembler-options'Maciej W. Rozycki5-68/+205
Implement MIPS target support for passing options to the disassembler, complementing commit 65b48a81404c ("GDB: Add support for the new set/show disassembler-options commands."). This includes options that expect an argument, so adjust the generic code and data structures used so as to handle such options. So as to give backends syntax flexibility no specific delimiter has been defined to separate options from their respective arguments, so it has to be included as the last character of the option name. Completion code however has not been adjusted and consequently option arguments cannot be completed at this time. Also the MIPS target has non-empty defaults for the options, so that ABI names for the general-purpose registers respect our `set mips abi ...' setting rather than always being determined from the ELF headers of the binary file selected. Handle these defaults as implicit options, never shown to the user and always prepended to the user-specified options, so that the latters can override the defaults. The resulting output for the MIPS target is as follows: (gdb) show disassembler-options The current disassembler options are '' The following disassembler options are supported for use with the 'set disassembler-options <option>[,<option>...]' command: no-aliases Use canonical instruction forms. msa Recognize MSA instructions. virt Recognize the virtualization ASE instructions. xpa Recognize the eXtended Physical Address (XPA) ASE instructions. ginv Recognize the Global INValidate (GINV) ASE instructions. gpr-names=ABI Print GPR names according to specified ABI. Default: based on binary being disassembled. fpr-names=ABI Print FPR names according to specified ABI. Default: numeric. cp0-names=ARCH Print CP0 register names according to specified architecture. Default: based on binary being disassembled. hwr-names=ARCH Print HWR names according to specified architecture. Default: based on binary being disassembled. reg-names=ABI Print GPR and FPR names according to specified ABI. reg-names=ARCH Print CP0 register and HWR names according to specified architecture. For the options above, the following values are supported for "ABI": numeric 32 n32 64 For the options above, the following values are supported for "ARCH": numeric r3000 r3900 r4000 r4010 vr4100 vr4111 vr4120 r4300 r4400 r4600 r4650 r5000 vr5400 vr5500 r5900 r6000 rm7000 rm9000 r8000 r10000 r12000 r14000 r16000 mips5 mips32 mips32r2 mips32r3 mips32r5 mips32r6 mips64 mips64r2 mips64r3 mips64r5 mips64r6 interaptiv-mr2 sb1 loongson2e loongson2f loongson3a octeon octeon+ octeon2 octeon3 xlr xlp (gdb) which corresponds to what `objdump --help' used to print for the MIPS target, with minor formatting changes, most notably option argument lists being wrapped, but also the amount of white space separating options from the respective descriptions. The relevant part the new code is now also used by `objdump --help', which means these formatting changes apply to both outputs, except for argument list wrapping, which is GDB-specific. This also adds a separating new line between the heading and option lists where descriptions are provided, hence: (gdb) set architecture s390:31-bit (gdb) show disassembler-options The current disassembler options are '' The following disassembler options are supported for use with the 'set disassembler-options <option>[,<option>...]' command: esa Disassemble in ESA architecture mode zarch Disassemble in z/Architecture mode insnlength Print unknown instructions according to length from first two bits (gdb) but: (gdb) set architecture powerpc:common (gdb) show disassembler-options The current disassembler options are '' The following disassembler options are supported for use with the 'set disassembler-options <option>[,<option>...]' command: 403, 405, 440, 464, 476, 601, 603, 604, 620, 7400, 7410, 7450, 7455, 750cl, 821, 850, 860, a2, altivec, any, booke, booke32, cell, com, e200z4, e300, e500, e500mc, e500mc64, e5500, e6500, e500x2, efs, efs2, power4, power5, power6, power7, power8, power9, ppc, ppc32, 32, ppc64, 64, ppc64bridge, ppcps, pwr, pwr2, pwr4, pwr5, pwr5x, pwr6, pwr7, pwr8, pwr9, pwrx, raw, spe, spe2, titan, vle, vsx (gdb) Existing affected target backends have been adjusted accordingly. This has been verified manually with: (gdb) set architecture arm (gdb) set architecture powerpc:common (gdb) set architecture s390:31-bit to cause no issues with the `show disassembler-options' and `set disassembler-options' commands. A test case for the MIPS target has also been provided, covering the default settings with ABI overrides as well as disassembler option overrides. 2018-07-02 Maciej W. Rozycki <macro@mips.com> Simon Marchi <simon.marchi@polymtl.ca> include/ PR tdep/8282 * dis-asm.h (disasm_option_arg_t): New typedef. (disasm_options_and_args_t): Likewise. (disasm_options_t): Add `arg' member, document members. (disassembler_options_mips): New prototype. (disassembler_options_arm, disassembler_options_powerpc) (disassembler_options_s390): Update prototypes. opcodes/ PR tdep/8282 * mips-dis.c (mips_option_arg_t): New enumeration. (mips_options): New variable. (disassembler_options_mips): New function. (print_mips_disassembler_options): Reimplement in terms of `disassembler_options_mips'. * arm-dis.c (disassembler_options_arm): Adapt to using the `disasm_options_and_args_t' structure. * ppc-dis.c (disassembler_options_powerpc): Likewise. * s390-dis.c (disassembler_options_s390): Likewise. gdb/ PR tdep/8282 * disasm.h (gdb_disassembler): Add `m_disassembler_options_holder'. member * disasm.c (get_all_disassembler_options): New function. (gdb_disassembler::gdb_disassembler): Use it. (gdb_buffered_insn_length_init_dis): Likewise. (gdb_buffered_insn_length): Adjust accordingly. (set_disassembler_options): Handle options with arguments. (show_disassembler_options_sfunc): Likewise. Add a leading new line if showing options with descriptions. (disassembler_options_completer): Adapt to using the `disasm_options_and_args_t' structure. * mips-tdep.c (mips_disassembler_options): New variable. (mips_disassembler_options_o32): Likewise. (mips_disassembler_options_n32): Likewise. (mips_disassembler_options_n64): Likewise. (gdb_print_insn_mips): Don't set `disassembler_options'. (gdb_print_insn_mips_n32, gdb_print_insn_mips_n64): Remove functions. (mips_gdbarch_init): Always set `gdbarch_print_insn' to `gdb_print_insn_mips'. Set `gdbarch_disassembler_options', `gdbarch_disassembler_options_implicit' and `gdbarch_valid_disassembler_options'. * arm-tdep.c (_initialize_arm_tdep): Adapt to using the `disasm_options_and_args_t' structure. * gdbarch.sh (disassembler_options_implicit): New `gdbarch' method. (valid_disassembler_options): Switch from `disasm_options_t' to the `disasm_options_and_args_t' structure. * NEWS: Document `set disassembler-options' support for the MIPS target. * gdbarch.h: Regenerate. * gdbarch.c: Regenerate. gdb/doc/ PR tdep/8282 * gdb.texinfo (Source and Machine Code): Document `set disassembler-options' support for the MIPS target. gdb/testsuite/ PR tdep/8282 * gdb.arch/mips-disassembler-options.exp: New test. * gdb.arch/mips-disassembler-options.s: New test source.
2018-07-02[ARM] Update bfd's Tag_CPU_arch knowledgeThomas Preud'homme2-21/+58
BFD's bfd_get_mach () function returns a bfd specific value representing the architecture of the target which is populated from the Tag_CPU_arch build attribute value of that target. Among other users of that interfacem, objdump which uses it to print the architecture version of the binary being examinated and to decide what instruction is available if run with "-m arm" via its own mapping from bfd_mach_arm_X values to feature bits available. However, both BFD and objdump's most recent known architecture is Armv5TE. When encountering a newer architecture bfd_get_mach will return bfd_mach_arm_unknown. This is unfortunate since objdump uses that value to allow all instructions on all architectures which is already what it does by default, making the "-m arm" trick useless. This patch updates BFD and objdump's knowledge of Arm architecture versions up to the latest Armv8-M Baseline and Mainline, Armv8-R and Armv8.4-A architectures. Since several architecture versions (eg. 8.X-A) share the same Tag_CPU_arch build attribute value and bfd_mach_arm values, the mapping from bfd machine value to feature bits need to return the most featureful feature bits that would yield the given bfd machine value otherwise some instruction would not disassemble under "-m arm" mode. The patch rework that mapping to make this clearer and simplify writing the mapping rules. In particular, for simplicity all FPU instructions are allowed in all cases. Finally, the patch also rewrite the cpu_arch_ver table in GAS to use the TAG_CPU_ARCH_X macros rather than hardcode their value. 2018-07-02 Thomas Preud'homme <thomas.preudhomme@arm.com> bfd/ * archures.c (bfd_mach_arm_5TEJ, bfd_mach_arm_6, bfd_mach_arm_6KZ, bfd_mach_arm_6T2, bfd_mach_arm_6K, bfd_mach_arm_7, bfd_mach_arm_6M, bfd_mach_arm_6SM, bfd_mach_arm_7EM, bfd_mach_arm_8, bfd_mach_arm_8R, bfd_mach_arm_8M_BASE, bfd_mach_arm_8M_MAIN): Define. * bfd-in2.h: Regenerate. * cpu-arm.c (arch_info_struct): Add entries for above new bfd_mach_arm values. * elf32-arm.c (bfd_arm_get_mach_from_attributes): Add Tag_CPU_arch to bfd_mach_arm mapping logic for pre Armv4 and Armv5TEJ and later architectures. Force assert failure for any new Tag_CPU_arch value. gas/ * config/tc-arm.c (cpu_arch_ver): Use symbolic TAG_CPU_ARCH macros rather than hardcode their values. ld/ * arm-dis.c (select_arm_features): Fix typo in heading comment. Allow all FPU features and add mapping from new bfd_mach_arm values to allowed CPU feature bits. opcodes/ * testsuite/ld-arm/tls-descrelax-be8.d: Add architecture version in expected result. * testsuite/ld-arm/tls-descrelax-v7.d: Likewise. * testsuite/ld-arm/tls-longplt-lib.d: Likewise. * testsuite/ld-arm/tls-longplt.d: Likewise.
2018-06-29Fix AArch64 encodings for by element instructions.Tamar Christina7-165/+194
Some instructions in Armv8-a place a limitation on FP16 registers that can be used as the register from which to select an element from. e.g. fmla restricts Rm to 4 bits when using an FP16 register. This restriction does not apply for all instructions, e.g. fcmla does not have this restriction as it gets an extra bit from the M field. Unfortunately, this restriction to S_H was added for all _Em operands before, meaning for a large number of instructions you couldn't use the full register file. This fixes the issue by introducing a new operand _Em16 which applies this restriction only when paired with S_H and leaves the _Em and the other qualifiers for _Em16 unbounded (i.e. using the full 5 bit range). Also the patch updates all instructions that should be affected by this. opcodes/ PR binutils/23192 * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Likewise. * aarch64-opc-2.c: Likewise. * aarch64-dis.c (aarch64_ext_reglane): Add AARCH64_OPND_Em16 constraint. * aarch64-opc.c (operand_general_constraint_met_p, aarch64_print_operand): Likewise. * aarch64-tbl.h (aarch64_opcode_table): Change Em to Em16 for smlal, smlal2, fmla, fmls, fmul, fmulx, sqrdmlah, sqrdlsh, fmlal, fmlsl, fmlal2, fmlsl2. (AARCH64_OPERANDS): Add Em2. gas/ PR binutils/23192 * config/tc-aarch64.c (process_omitted_operand, parse_operands): Add AARCH64_OPND_Em16 * testsuite/gas/aarch64/advsimd-armv8_3.s: Expand tests to cover upper 16 registers. * testsuite/gas/aarch64/advsimd-armv8_3.d: Likewise. * testsuite/gas/aarch64/advsimd-compnum.s: Likewise. * testsuite/gas/aarch64/advsimd-compnum.d: Likewise. * testsuite/gas/aarch64/sve.d: Likewise. include/ PR binutils/23192 *opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_Em16.
2018-06-26Updated translations.Nick Clifton4-865/+1945
gas * po/uk.po: Updated Ukranian translation. bfd * po/uk.po: Updated Ukranian translation. ld * po/uk.po: Updated Ukranian translation. gold * po/uk.po: Updated Ukranian translation. opcodes * po/uk.po: Updated Ukranian translation. * po/de.po: Updated German translation. * po/pt_BR.po: Updated Brazilian Portuguese translation. binutils* po/sv.po: Updated Swedish translation. * po/uk.po: Updated Ukranian translation.
2018-06-26Fix spelling mistakes.Nick Clifton2-1/+5
opcodes * nfp-dis.c: Fix spelling mistake. ld * emultempl/aarch64elf.em: Fix spelling mistake. * emultempl/avrelf.em: Likewise. * emultempl/elf32.em: Likewise. binutils* doc/binutils.texi: Fix spelling mistakes. * README--how-to-make-a-release: Likewise.
2018-06-24Regenerate configure and pot files with updated binutils version number.Nick Clifton3-97/+140
2018-06-24Add 2.30 branch notes to ChangeLogs and NEWS files.Nick Clifton1-0/+4
2018-06-22Correct negs aliasing on AArch64.Tamar Christina4-5/+11
This patch fixes a disassembly issue with the aliases to subs with a shifted register. The subs instruction with the zero register as destination is supposed to alias to cmp and when the first input register is the zero register the subs is supposed to be aliased to negs. This means that a subs with destination and first input registers the zero register is supposed to be a cmp. This is done by raising the priority of the cmp alias. opcodes/ * aarch64-tbl.h (aarch64_opcode_table): Fix alias flag for negs * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Likewise. gas/ * testsuite/gas/aarch64/addsub.s: Add negs to zero reg test. * testsuite/gas/aarch64/addsub.d: Likewise.
2018-06-21MIPS/opcodes: Fix a typo in `-M ginv' option descriptionMaciej W. Rozycki2-1/+6
opcodes/ * mips-dis.c (print_mips_disassembler_options): Fix a typo in `-M ginv' option description.
2018-06-20RISC-V: Accept constant operands in la and llaSebastian Huber2-2/+8
opcodes/ PR gas/23305 * riscv-opc.c (riscv_opcodes): Use new format specifier 'B' for la and lla. gas/ PR gas/23305 * config/tc-riscv.c (riscv_ip): Add format specifier 'B' for constants and symbols. * testsuite/gas/riscv/lla32.d: New file. * testsuite/gas/riscv/lla32.s: Likewise. * testsuite/gas/riscv/lla64-fail.d: Likewise. * testsuite/gas/riscv/lla64-fail.l: Likewise. * testsuite/gas/riscv/lla64-fail.s: Likewise. * testsuite/gas/riscv/lla64.d: Likewise. * testsuite/gas/riscv/lla64.s: Likewise.
2018-06-19Bump to autoconf 2.69 and automake 1.15.1Simon Marchi6-995/+1563
When trying to run the update-gnulib.sh script in gdb, I get this: Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1. Aborting. Apparently, it's an issue with a regex in automake that triggers a warning starting with Perl 5.22. It has been fixed in automake 1.15.1. So I think it's a good excuse to bump the versions of autoconf and automake used in the gnulib import. And to avoid requiring multiple builds of autoconf/automake, it was suggested that we bump the required version of those tools for all binutils-gdb. For autoconf, the 2.69 version is universally available, so it's an easy choice. For automake, different distros and distro versions have different automake versions. But 1.15.1 seems to be the most readily available as a package. In any case, it's easy to build it from source. I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ, because I don't think they are useful in our case. They only specify a lower bound for the acceptable version of automake/autoconf. That's useful if you let the user choose the version of the tool they want to use, but want to set a minimum version (because you use a feature that was introduced in that version). In our case, we force people to use a specific version anyway. For the autoconf version, we have the check in config/override.m4 that enforces the version we want. It will be one less thing to update next time we change autotools version. I hit a few categories of problems that required some changes. They are described below along with the chosen solutions. Problem 1: configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation Solution 1: Adjust the code based on the example at that URL. Problem 2 (in zlib/): Makefile.am: error: required file './INSTALL' not found Makefile.am: 'automake --add-missing' can install 'INSTALL' Makefile.am: error: required file './NEWS' not found Makefile.am: error: required file './AUTHORS' not found Makefile.am: error: required file './COPYING' not found Makefile.am: 'automake --add-missing' can install 'COPYING' Solution 2: Add the foreign option to AUTOMAKE_OPTIONS. Problem 3: doc/Makefile.am:20: error: support for Cygnus-style trees has been removed Solution 3: Remove the cygnus options. Problem 4: Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') Solution 4: Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is already defined earlier). Problem 5: doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 5: Rename .texinfo files to .texi. Problem 6: doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 6: Remove the hack at the bottom of doc/Makefile.am and use the info-in-builddir automake option. Problem 7: doc/Makefile.am:35: error: required file '../texinfo.tex' not found doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex' Solution 7: Use the no-texinfo.tex automake option. We also have one in texinfo/texinfo.tex, not sure if we should point to that, or move it (or a newer version of it added with automake --add-missing) to top-level. Problem 8: Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory, Makefile.am:131: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. Solution 8: Use subdir-objects, that means adjusting references to some .o that will now be in config/. Problem 9: configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... ../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from... ../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from... ../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from... ../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from... configure.ac:375: the top level Solution 9: Use AC_LANG_SOURCE, or use proper quoting. Problem 10 (in intl/): configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS /usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from... /usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from... /usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from... /usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from... /usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from... /usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from... /usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from... configure.ac:7: the top level Solution 10: Add AC_USE_SYSTEM_EXTENSIONS in configure.ac. ChangeLog: * libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * README-maintainer-mode: Update version requirements. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. bfd/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. (INCLUDES): Rename to ... (AM_CPPFLAGS): ... this. * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add info-in-builddir no-texinfo.tex. (info_TEXINFOS): Rename bfd.texinfo to bfd.texi. * doc/bfd.texinfo: Rename to ... * doc/bfd.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. binutils/ChangeLog: * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add info-in-builddir no-texinfo.tex. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. config/ChangeLog: * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. etc/ChangeLog: * configure.in: Remove AC_PREREQ. * configure: Re-generate. gas/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects. (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix. * configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles, extra_objects): Add config/ prefix. * doc/as.texinfo: Rename to... * doc/as.texi: ... this. * doc/Makefile.am: Rename as.texinfo to as.texi throughout. Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gdb/ChangeLog: * common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION, PACKAGE_STRING, PACKAGE_TARNAME): Undefine. * configure.ac: Remove AC_PREREQ, add missing quoting. * gnulib/configure.ac: Modernize usage of AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ. * gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69. (AUTOMAKE_VERSION): Bump to 1.15.1. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. * gnulib/aclocal.m4: Re-generate. * gnulib/config.in: Re-generate. * gnulib/configure: Re-generate. * gnulib/import/Makefile.in: Re-generate. gdb/gdbserver/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. gdb/testsuite/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. gold/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting and usage of AC_LANG_SOURCE. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * testsuite/Makefile.in: Re-generate. gprof/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * gconfig.in: Re-generate. intl/ChangeLog: * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. ld/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. (AUTOMAKE_OPTIONS): Add info-in-builddir. * README: Rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. * gen-doc.texi: Likewise. * h8-doc.texi: Likewise. * ld.texinfo: Rename to ... * ld.texi: ... this. * ldint.texinfo: Rename to ... * ldint.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. libdecnumber/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libiberty/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. opcodes/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. * configure.ac: Remove AC_PREREQ. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. readline/ChangeLog.gdb: * configure: Re-generate. * examples/rlfe/configure: Re-generate. sim/ChangeLog: * All configure.ac: Remove AC_PREREQ. * All configure: Re-generate. zlib/ChangeLog.bin-gdb: * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate.
2018-06-14MIPS: Add Global INValidate ASE supportFaraz Shahbazker3-2/+30
Add support for the Global INValidate Application Specific Extension for Release 6 of the MIPS Architecture. [1] "MIPS Architecture for Programmers Volume II-A: The MIPS32 Instruction Set Manual", Imagination Technologies Ltd., Document Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical List of Instructions", pp. 187-191 bfd/ * elfxx-mips.c (print_mips_ases): Add GINV extension. binutils/ * readelf.c (print_mips_ases): Add GINV extension. gas/ * NEWS: Mention MIPS Global INValidate ASE support. * config/tc-mips.c (options): Add OPTION_GINV and OPTION_NO_GINV. (md_longopts): Likewise. (mips_ases): Define availability for GINV. (mips_convert_ase_flags): Map ASE_GINV to AFL_ASE_GINV. (md_show_usage): Add help for -mginv and -mno-ginv. * doc/as.texinfo: Document -mginv, -mno-ginv. * doc/c-mips.texi: Document -mginv, -mno-ginv, .set ginv and .set noginv. * testsuite/gas/mips/ase-errors-1.s: Add error checks for GINV ASE. * testsuite/gas/mips/ase-errors-2.s: Likewise. * testsuite/gas/mips/ase-errors-1.l: Likewise. * testsuite/gas/mips/ase-errors-2.l: Likewise. * testsuite/gas/mips/ginv.d: New test. * testsuite/gas/mips/ginv-err.d: New test. * testsuite/gas/mips/ginv-err.l: New test stderr output. * testsuite/gas/mips/ginv.s: New test source. * testsuite/gas/mips/ginv-err.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. include/ * elf/mips.h (AFL_ASE_GINV, AFL_ASE_RESERVED1): New macros. (AFL_ASE_MASK): Update to include AFL_ASE_GINV. * opcode/mips.h: Document "+\" operand format. (ASE_GINV): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add GINV to mips32r6 and mips64r6 descriptors. (parse_mips_ase_option): Handle -Mginv option. (print_mips_disassembler_options): Document -Mginv. * mips-opc.c (decode_mips_operand) <+\>: New operand format. (GINV): New macro. (mips_opcodes): Define ginvi and ginvt.
2018-06-13MIPS: Add CRC ASE supportScott Egerton3-2/+26
Add support for the CRC Application Specific Extension for Release 6 of the MIPS Architecture. [1] "MIPS Architecture for Programmers Volume II-A: The MIPS32 Instruction Set Manual", Imagination Technologies Ltd., Document Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical List of Instructions", pp. 143-148 [2] "MIPS Architecture for Programmers Volume II-A: The MIPS64 Instruction Set Manual", Imagination Technologies Ltd., Document Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical List of Instructions", pp. 165-170 ChangeLog: bfd/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> * elfxx-mips.c (print_mips_ases): Add CRC. binutils/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> * readelf.c (print_mips_ases): Add CRC. gas/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> Maciej W. Rozycki <macro@mips.com> * config/tc-mips.c (options): Add OPTION_CRC and OPTION_NO_CRC. (md_longopts): Likewise. (md_show_usage): Add help for -mcrc and -mno-crc. (mips_ases): Define availability for CRC and CRC64. (mips_convert_ase_flags): Map ASE_CRC to AFL_ASE_CRC. * doc/as.texinfo: Document -mcrc, -mno-crc. * doc/c-mips.texi: Document -mcrc, -mno-crc, .set crc and .set no-crc. * testsuite/gas/mips/ase-errors-1.l: Add error checks for CRC ASE. * testsuite/gas/mips/ase-errors-2.l: Likewise. * testsuite/gas/mips/ase-errors-1.s: Likewise. * testsuite/gas/mips/ase-errors-2.s: Likewise. * testsuite/gas/mips/crc.d: New test. * testsuite/gas/mips/crc64.d: New test. * testsuite/gas/mips/crc-err.d: New test. * testsuite/gas/mips/crc64-err.d: New test. * testsuite/gas/mips/crc-err.l: New test stderr output. * testsuite/gas/mips/crc64-err.l: New test stderr output. * testsuite/gas/mips/crc.s: New test source. * testsuite/gas/mips/crc64.s: New test source. * testsuite/gas/mips/crc-err.s: New test source. * testsuite/gas/mips/crc64-err.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. include/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> * elf/mips.h (AFL_ASE_CRC): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_CRC. * opcode/mips.h (ASE_CRC): New macro. * opcode/mips.h (ASE_CRC64): Likewise. opcodes/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> * mips-dis.c (mips_arch_choices): Add CRC and CRC64 ASEs. * mips-opc.c (CRC, CRC64): New macros. (mips_builtin_opcodes): Define crc32b, crc32h, crc32w, crc32cb, crc32ch and crc32cw for CRC. Define crc32d and crc32cd for CRC64.
2018-06-08Prevent undefined FMOV instructions being accepted by the AArch64 assembler.Egeyar Bagcioglu2-2/+22
Detect illegal FMOV instructions that changes the size from 32 bits to 64 bits and vice versa. Add tests for these and other undefined FMOV instructions. PR 20319 gas * testsuite/gas/aarch64/illegal-3.s: Test if unallocated FMOV encodings are detected as undefined. * testsuite/gas/aarch64/illegal-3.d: Likewise. * testsuite/gas/aarch64/illegal.s: Test if FMOV instructions that are changing the size from 32 bits to 64 bits and vice versa trigger an error. * testsuite/gas/aarch64/illegal.l: Likewise. opcodes * aarch64-tbl.h: Introduce QL_INT2FP_FMOV and QL_FP2INT_FMOV. (aarch64_opcode_table) : Use QL_INT2FP_FMOV and QL_FP2INT_FMOV.
2018-06-06Fix xtensa "clobbered by longjmp" warningsAlan Modra2-6/+12
.../opcodes/xtensa-dis.c: In function ‘print_insn_xtensa’: .../opcodes/xtensa-dis.c:257:17: error: variable ‘fmt’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered] xtensa_format fmt; ^~~ .../opcodes/xtensa-dis.c:262:26: error: variable ‘valid_insn’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered] int first, first_slot, valid_insn = 0; ^~~~~~~~~~ * xtensa-dis.c (print_insn_xtensa): Init fmt and valid_insn after setjmp. Move init for some other vars later too.
2018-06-04xtensa: use property tables for correct disassemblyMax Filippov2-22/+206
xtensa disassembler does not use information from the .xt.prop sections to switch between code/data disassembly in text sections. This may result in incorrect disassembly when data is interpreted as code and disassembler loses synchronization with instruction stream. Use .xt.prop section information to correctly interpret code and data and synchronize with instruction stream. 2018-06-04 Max Filippov <jcmvbkbc@gmail.com> bfd/ * elf32-xtensa.c (xtensa_read_table_entries): Make global. (compute_fill_extra_space): Drop declaration. Rename function to xtensa_compute_fill_extra_space. (compute_ebb_actions, remove_dead_literal): Update references to compute_fill_extra_space. include/ * elf/xtensa.h (xtensa_read_table_entries) (xtensa_compute_fill_extra_space): New declarations. opcodes/ * xtensa-dis.c (bfd.h, elf/xtensa.h): New includes. (dis_private): Add new fields for property section tracking. (xtensa_coalesce_insn_tables, xtensa_find_table_entry) (xtensa_instruction_fits): New functions. (fetch_data): Bump minimal fetch size to 4. (print_insn_xtensa): Make struct dis_private static. Load and prepare property table on section change. Don't disassemble literals. Don't disassemble instructions that cross property table boundaries.
2018-06-01Bump version number to 2.30.52H.J. Lu2-10/+14
Bump version number to 2.30.52 since _bfd_link_hide_symbol has been added to bfd_target. bfd/ * version.m4: Bump version to 2.30.52 * configure: Regenerated. binutils/ * configure: Regenerated. gas/ * configure: Regenerated. gprof/ * configure: Regenerated. ld/ * configure: Regenerated. opcodes/ * configure: Regenerated.
2018-06-01x86: fold MOV to/from segment register templatesJan Beulich3-119/+16
First of all there's no point in having separate Cpu386 templates - the respective SReg3 registers can't be specified for pre-386 anyway; see parse_real_register(). And then we can also make use of D here for the memory forms of the insn. This cannot be done for the non-64bit GPR forms because of the IgnoreSize that cannot be dropped from the to-SREG variant.
2018-06-01x86: don't emit REX.W for SLDT and STRJan Beulich3-4/+9
Just like for other selector register reads, they're unnecessary and should hence be avoided.
2018-06-01x86/Intel: accept "oword ptr" for INVPCIDJan Beulich3-6/+11
The insn is no different in this reagrd from INVEPT and INVVPID.
2018-06-01Make _bfd_error_handler available outside libbfdAlan Modra6-5/+12
Needed when building libopcodes.so. bfd/ * bfd.c (_bfd_error_handler): Arrange for this function to be declared in bfd-in2.h. * libbfd-in.h (_bfd_error_handler): Don't declare. * libbfd.h: Regenerate. * bfd-in2.h: Regenerate. opcodes/ * sysdep.h (_bfd_error_handler): Don't declare. * msp430-decode.opc: Include bfd.h. Don't include ansidecl.h here. * rl78-decode.opc: Likewise. * msp430-decode.c: Regenerate. * rl78-decode.c: Regenerate.
2018-05-30Add znver2 support.Amit Pawar3-0/+15
gas/ * config/tc-i386.c (cpu_flag_init): Add CPU_ZNVER2_FLAGS. * doc/c-i386.texi : Document znver2. * gas/testsuite/gas/i386/arch-13.s: Updated for znver2. * gas/testsuite/gas/i386/arch-13.d: Updated. * gas/testsuite/gas/i386/arch-13-znver1.d: Updated. * gas/testsuite/gas/i386/arch-13-znver2.d: New file. * gas/testsuite/gas/i386/x86-64-arch-3.s: Updated for znver2. * gas/testsuite/gas/i386/x86-64-arch-3.d: Updated. * gas/testsuite/gas/i386/x86-64-arch-3-znver1.d: Updated. * gas/testsuite/gas/i386/x86-64-arch-3-znver2.d: New file. * gas/testsuite/gas/i386/i386.exp: Updated for new test. opcode/ * i386-gen.c (cpu_flag_init): Add CPU_ZNVER2_FLAGS. * i386-init.h : Regenerated.
2018-05-25s12z regenAlan Modra3-1/+7
This patch regenerates a number of files that either were edited by hand or not regenerated when s12z support was added to binutils. bfd/ * Makefile.in: Regenerate. * po/SRC-POTFILES.in: Regenerate. gas/ * po/POTFILES.in: Regenerate. ld/ * po/BLD-POTFILES.in: Regenerate. opcodes/ * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate.
2018-05-21Remove fake operand handling for extended mnemonics.Peter Bergner3-102/+123
opcodes/ * ppc-opc.c (insert_bat, extract_bat, insert_bba, extract_bba, insert_rbs, extract_rbs, insert_xb6s, extract_xb6s): Delete functions. (insert_bab, extract_bab, insert_btab, extract_btab, insert_rsb, extract_rsb, insert_xab6, extract_xab6): New functions. (BAT, BBA VBA RBS XB6S): Delete macros. (BTAB, BAB, VAB, RAB, RSB, XAB6): New macros. (BB, BD, RBX, XC6): Update for new macros. (powerpc_opcodes) <evmr, evnot, vmr, vnot, crnot, crclr, crset, crmove, not, not., mr, mr., xxspltd, xxswapd, xvmovsp, xvmovdp, e_crnot, e_crclr, e_crset, e_crmove>: Likewise. * ppc-dis.c (print_insn_powerpc): Delete handling of fake operands. include/ * opcode/ppc.h (PPC_OPERAND_FAKE): Delete macro. gas/ * config/tc-ppc.c (md_assemble): Delete handling of fake operands. * testsuite/gas/ppc/common.s (crmove, cror, or., or, nor., nor): Add test of extended mnemonics. * testsuite/gas/ppc/common.d: Likewise. Don't match instruction offset. * testsuite/gas/ppc/spe.s (evor, evnor): Add test of extended mnemonics. * testsuite/gas/ppc/spe.d: Likewise. Don't match instruction offset.
2018-05-18Add support for the Freescale s12z processor.John Darrington9-0/+2765
bfd * Makefile.am: Add s12z files. * Makefile.in: Regenerate. * archures.c: Add bfd_s12z_arch. * bfd-in.h: Add exports of bfd_putb24 and bfd_putl24. * bfd-in2.h: Regenerate. * config.bfd: Add s12z target. * configure.ac: Add s12z target. * configure: Regenerate. * cpu-s12z.c: New file. * elf32-s12z.c: New file. * libbfd.c (bfd_putb24): New function. (bfd_putl24): New function. * libbfd.h: Regenerate. * reloc.c: Add s12z relocations. (bfd_get_reloc_size): Handle size 5 relocs. * targets.c: Add s12z_elf32_vec. opcodes * Makefile.am: Add support for s12z architecture. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * s12z-dis.c: New file. * s12z.h: New file. include * elf/s12z.h: New header. ld * Makefile.am: Add support for s12z architecture. * configure.tgt: Likewise. * Makefile.in: Regenerate. * emulparams/m9s12zelf.sh: New file. * scripttempl/elfm9s12z.sc: New file. * testsuite/ld-discard/static.d: Expect to fail for the s12z target. * testsuite/ld-elf/endsym.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/pr14926.d: Skip for the s12z target. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-s12z: New directory. * testsuite/ld-s12z/opr-linking.d: New file. * testsuite/ld-s12z/opr-linking.s: New file. * testsuite/ld-s12z/relative-linking.d: New file. * testsuite/ld-s12z/relative-linking.s: New file. * testsuite/ld-s12z/z12s.exp: New file. gas * Makefile.am: Add support for s12z target. * Makefile.in: Regenerate. * NEWS: Mention the new support. * config/tc-s12z.c: New file. * config/tc-s12z.h: New file. * configure.tgt: Add s12z support. * doc/Makefile.am: Likewise. * doc/Makefile.in: Regenerate. * doc/all.texi: Add s12z documentation. * doc/as.textinfo: Likewise. * doc/c-s12z.texi: New file. * testsuite/gas/s12z: New directory. * testsuite/gas/s12z/abs.d: New file. * testsuite/gas/s12z/abs.s: New file. * testsuite/gas/s12z/adc-imm.d: New file. * testsuite/gas/s12z/adc-imm.s: New file. * testsuite/gas/s12z/adc-opr.d: New file. * testsuite/gas/s12z/adc-opr.s: New file. * testsuite/gas/s12z/add-imm.d: New file. * testsuite/gas/s12z/add-imm.s: New file. * testsuite/gas/s12z/add-opr.d: New file. * testsuite/gas/s12z/add-opr.s: New file. * testsuite/gas/s12z/and-imm.d: New file. * testsuite/gas/s12z/and-imm.s: New file. * testsuite/gas/s12z/and-opr.d: New file. * testsuite/gas/s12z/and-opr.s: New file. * testsuite/gas/s12z/and-or-cc.d: New file. * testsuite/gas/s12z/and-or-cc.s: New file. * testsuite/gas/s12z/bfext-special.d: New file. * testsuite/gas/s12z/bfext-special.s: New file. * testsuite/gas/s12z/bfext.d: New file. * testsuite/gas/s12z/bfext.s: New file. * testsuite/gas/s12z/bit-manip.d: New file. * testsuite/gas/s12z/bit-manip.s: New file. * testsuite/gas/s12z/bit.d: New file. * testsuite/gas/s12z/bit.s: New file. * testsuite/gas/s12z/bra-expression-defined.d: New file. * testsuite/gas/s12z/bra-expression-defined.s: New file. * testsuite/gas/s12z/bra-expression-undef.d: New file. * testsuite/gas/s12z/bra-expression-undef.s: New file. * testsuite/gas/s12z/bra.d: New file. * testsuite/gas/s12z/bra.s: New file. * testsuite/gas/s12z/brclr-symbols.d: New file. * testsuite/gas/s12z/brclr-symbols.s: New file. * testsuite/gas/s12z/brset-clr-opr-imm-rel.d: New file. * testsuite/gas/s12z/brset-clr-opr-imm-rel.s: New file. * testsuite/gas/s12z/brset-clr-opr-reg-rel.d: New file. * testsuite/gas/s12z/brset-clr-opr-reg-rel.s: New file. * testsuite/gas/s12z/brset-clr-reg-imm-rel.d: New file. * testsuite/gas/s12z/brset-clr-reg-imm-rel.s: New file. * testsuite/gas/s12z/brset-clr-reg-reg-rel.d: New file. * testsuite/gas/s12z/brset-clr-reg-reg-rel.s: New file. * testsuite/gas/s12z/clb.d: New file. * testsuite/gas/s12z/clb.s: New file. * testsuite/gas/s12z/clr-opr.d: New file. * testsuite/gas/s12z/clr-opr.s: New file. * testsuite/gas/s12z/clr.d: New file. * testsuite/gas/s12z/clr.s: New file. * testsuite/gas/s12z/cmp-imm.d: New file. * testsuite/gas/s12z/cmp-imm.s: New file. * testsuite/gas/s12z/cmp-opr-inc.d: New file. * testsuite/gas/s12z/cmp-opr-inc.s: New file. * testsuite/gas/s12z/cmp-opr-rdirect.d: New file. * testsuite/gas/s12z/cmp-opr-rdirect.s: New file. * testsuite/gas/s12z/cmp-opr-reg.d: New file. * testsuite/gas/s12z/cmp-opr-reg.s: New file. * testsuite/gas/s12z/cmp-opr-rindirect.d: New file. * testsuite/gas/s12z/cmp-opr-rindirect.s: New file. * testsuite/gas/s12z/cmp-opr-sxe4.d: New file. * testsuite/gas/s12z/cmp-opr-sxe4.s: New file. * testsuite/gas/s12z/cmp-opr-xys.d: New file. * testsuite/gas/s12z/cmp-opr-xys.s: New file. * testsuite/gas/s12z/cmp-s-imm.d: New file. * testsuite/gas/s12z/cmp-s-imm.s: New file. * testsuite/gas/s12z/cmp-s-opr.d: New file. * testsuite/gas/s12z/cmp-s-opr.s: New file. * testsuite/gas/s12z/cmp-xy.d: New file. * testsuite/gas/s12z/cmp-xy.s: New file. * testsuite/gas/s12z/com-opr.d: New file. * testsuite/gas/s12z/com-opr.s: New file. * testsuite/gas/s12z/complex-shifts.d: New file. * testsuite/gas/s12z/complex-shifts.s: New file. * testsuite/gas/s12z/db-tb-cc-opr.d: New file. * testsuite/gas/s12z/db-tb-cc-opr.s: New file. * testsuite/gas/s12z/db-tb-cc-reg.d: New file. * testsuite/gas/s12z/db-tb-cc-reg.s: New file. * testsuite/gas/s12z/dbCC.d: New file. * testsuite/gas/s12z/dbCC.s: New file. * testsuite/gas/s12z/dec-opr.d: New file. * testsuite/gas/s12z/dec-opr.s: New file. * testsuite/gas/s12z/dec.d: New file. * testsuite/gas/s12z/dec.s: New file. * testsuite/gas/s12z/div.d: New file. * testsuite/gas/s12z/div.s: New file. * testsuite/gas/s12z/eor.d: New file. * testsuite/gas/s12z/eor.s: New file. * testsuite/gas/s12z/exg.d: New file. * testsuite/gas/s12z/exg.s: New file. * testsuite/gas/s12z/ext24-ld-xy.d: New file. * testsuite/gas/s12z/ext24-ld-xy.s: New file. * testsuite/gas/s12z/inc-opr.d: New file. * testsuite/gas/s12z/inc-opr.s: New file. * testsuite/gas/s12z/inc.d: New file. * testsuite/gas/s12z/inc.s: New file. * testsuite/gas/s12z/inh.d: New file. * testsuite/gas/s12z/inh.s: New file. * testsuite/gas/s12z/jmp.d: New file. * testsuite/gas/s12z/jmp.s: New file. * testsuite/gas/s12z/jsr.d: New file. * testsuite/gas/s12z/jsr.s: New file. * testsuite/gas/s12z/ld-imm-page2.d: New file. * testsuite/gas/s12z/ld-imm-page2.s: New file. * testsuite/gas/s12z/ld-imm.d: New file. * testsuite/gas/s12z/ld-imm.s: New file. * testsuite/gas/s12z/ld-immu18.d: New file. * testsuite/gas/s12z/ld-immu18.s: New file. * testsuite/gas/s12z/ld-large-direct.d: New file. * testsuite/gas/s12z/ld-large-direct.s: New file. * testsuite/gas/s12z/ld-opr.d: New file. * testsuite/gas/s12z/ld-opr.s: New file. * testsuite/gas/s12z/ld-s-opr.d: New file. * testsuite/gas/s12z/ld-s-opr.s: New file. * testsuite/gas/s12z/ld-small-direct.d: New file. * testsuite/gas/s12z/ld-small-direct.s: New file. * testsuite/gas/s12z/lea-immu18.d: New file. * testsuite/gas/s12z/lea-immu18.s: New file. * testsuite/gas/s12z/lea.d: New file. * testsuite/gas/s12z/lea.s: New file. * testsuite/gas/s12z/mac.d: New file. * testsuite/gas/s12z/mac.s: New file. * testsuite/gas/s12z/min-max.d: New file. * testsuite/gas/s12z/min-max.s: New file. * testsuite/gas/s12z/mod.d: New file. * testsuite/gas/s12z/mod.s: New file. * testsuite/gas/s12z/mov.d: New file. * testsuite/gas/s12z/mov.s: New file. * testsuite/gas/s12z/mul-imm.d: New file. * testsuite/gas/s12z/mul-imm.s: New file. * testsuite/gas/s12z/mul-opr-opr.d: New file. * testsuite/gas/s12z/mul-opr-opr.s: New file. * testsuite/gas/s12z/mul-opr.d: New file. * testsuite/gas/s12z/mul-opr.s: New file. * testsuite/gas/s12z/mul-reg.d: New file. * testsuite/gas/s12z/mul-reg.s: New file. * testsuite/gas/s12z/mul.d: New file. * testsuite/gas/s12z/mul.s: New file. * testsuite/gas/s12z/neg-opr.d: New file. * testsuite/gas/s12z/neg-opr.s: New file. * testsuite/gas/s12z/not-so-simple-shifts.d: New file. * testsuite/gas/s12z/not-so-simple-shifts.s: New file. * testsuite/gas/s12z/opr-18u.d: New file. * testsuite/gas/s12z/opr-18u.s: New file. * testsuite/gas/s12z/opr-expr.d: New file. * testsuite/gas/s12z/opr-expr.s: New file. * testsuite/gas/s12z/opr-ext-18.d: New file. * testsuite/gas/s12z/opr-ext-18.s: New file. * testsuite/gas/s12z/opr-idx-24-reg.d: New file. * testsuite/gas/s12z/opr-idx-24-reg.s: New file. * testsuite/gas/s12z/opr-idx3-reg.d: New file. * testsuite/gas/s12z/opr-idx3-reg.s: New file. * testsuite/gas/s12z/opr-idx3-xysp-24.d: New file. * testsuite/gas/s12z/opr-idx3-xysp-24.s: New file. * testsuite/gas/s12z/opr-indirect-expr.d: New file. * testsuite/gas/s12z/opr-indirect-expr.s: New file. * testsuite/gas/s12z/opr-symbol.d: New file. * testsuite/gas/s12z/opr-symbol.s: New file. * testsuite/gas/s12z/or-imm.d: New file. * testsuite/gas/s12z/or-imm.s: New file. * testsuite/gas/s12z/or-opr.d: New file. * testsuite/gas/s12z/or-opr.s: New file. * testsuite/gas/s12z/p2-mul.d: New file. * testsuite/gas/s12z/p2-mul.s: New file. * testsuite/gas/s12z/page2-inh.d: New file. * testsuite/gas/s12z/page2-inh.s: New file. * testsuite/gas/s12z/psh-pul.d: New file. * testsuite/gas/s12z/psh-pul.s: New file. * testsuite/gas/s12z/qmul.d: New file. * testsuite/gas/s12z/qmul.s: New file. * testsuite/gas/s12z/rotate.d: New file. * testsuite/gas/s12z/rotate.s: New file. * testsuite/gas/s12z/s12z.exp: New file. * testsuite/gas/s12z/sat.d: New file. * testsuite/gas/s12z/sat.s: New file. * testsuite/gas/s12z/sbc-imm.d: New file. * testsuite/gas/s12z/sbc-imm.s: New file. * testsuite/gas/s12z/sbc-opr.d: New file. * testsuite/gas/s12z/sbc-opr.s: New file. * testsuite/gas/s12z/shift.d: New file. * testsuite/gas/s12z/shift.s: New file. * testsuite/gas/s12z/simple-shift.d: New file. * testsuite/gas/s12z/simple-shift.s: New file. * testsuite/gas/s12z/single-ops.d: New file. * testsuite/gas/s12z/single-ops.s: New file. * testsuite/gas/s12z/specd6.d: New file. * testsuite/gas/s12z/specd6.s: New file. * testsuite/gas/s12z/st-large-direct.d: New file. * testsuite/gas/s12z/st-large-direct.s: New file. * testsuite/gas/s12z/st-opr.d: New file. * testsuite/gas/s12z/st-opr.s: New file. * testsuite/gas/s12z/st-s-opr.d: New file. * testsuite/gas/s12z/st-s-opr.s: New file. * testsuite/gas/s12z/st-small-direct.d: New file. * testsuite/gas/s12z/st-small-direct.s: New file. * testsuite/gas/s12z/st-xy.d: New file. * testsuite/gas/s12z/st-xy.s: New file. * testsuite/gas/s12z/sub-imm.d: New file. * testsuite/gas/s12z/sub-imm.s: New file. * testsuite/gas/s12z/sub-opr.d: New file. * testsuite/gas/s12z/sub-opr.s: New file. * testsuite/gas/s12z/tfr.d: New file. * testsuite/gas/s12z/tfr.s: New file. * testsuite/gas/s12z/trap.d: New file. * testsuite/gas/s12z/trap.s: New file. binutils* readelf.c: Add support for s12z architecture. * testsuite/lib/binutils-common.exp (is_elf_format): Excluse s12z targets.
2018-05-18opcodes sources should not include libbfd.hAlan Modra2-7/+10
* nfp-dis.c: Don't #include libbfd.h. (init_nfp3200_priv): Use bfd_get_section_contents. (nit_nfp6000_mecsr_sec): Likewise.
2018-05-17Updated simplified Chinese translation for the opcodes directory.Nick Clifton2-466/+465
opcodes * po/zh_CN.po: Updated simplified Chinese translation.
2018-05-16Fix disassembly mask for vector sdot on AArch64.Tamar Christina3-160/+186
This patch corrects the disassembly masks for by element dot product instructions. The bit 10 was wrong and supposed to be 1. This caused incorrect disassembly of instructions in the unallocated space to disassemble as dot product instructions. No encoding errors can arrise from this issue. opcodes/ PR binutils/23109 * aarch64-tbl.h (aarch64_opcode_table): Correct sdot and udot. * aarch64-dis-2.c: Regenerate.
2018-05-15Implement Read/Write constraints on system registers on AArch64Tamar Christina6-94/+197
This patch adds constraints for read and write only system registers with the msr and mrs instructions. The code will treat having both flags set and none set as the same. These flags add constraints that must be matched up. e.g. a system register with a READ only flag set, can only be used with mrs. If The constraint fails a warning is emitted. Examples of the warnings generated: test.s: Assembler messages: test.s:5: Warning: specified register cannot be written to at operand 1 -- `msr dbgdtrrx_el0,x3' test.s:7: Warning: specified register cannot be read from at operand 2 -- `mrs x3,dbgdtrtx_el0' test.s:8: Warning: specified register cannot be written to at operand 1 -- `msr midr_el1,x3' and disassembly notes: 0000000000000000 <main>: 0: d5130503 msr dbgdtrtx_el0, x3 4: d5130503 msr dbgdtrtx_el0, x3 8: d5330503 mrs x3, dbgdtrrx_el0 c: d5330503 mrs x3, dbgdtrrx_el0 10: d5180003 msr midr_el1, x3 ; note: writing to a read-only register. Note that because dbgdtrrx_el0 and dbgdtrtx_el0 have the same encoding, during disassembly the constraints are use to disambiguate between the two. An exact constraint match is always prefered over partial ones if available. As always the warnings can be suppressed with -w and also be made errors using warnings as errors. binutils/ PR binutils/21446 * doc/binutils.texi (-M): Document AArch64 options. gas/ PR binutils/21446 * testsuite/gas/aarch64/illegal-sysreg-2.s: Fix pmbidr_el1 test. * testsuite/gas/aarch64/illegal-sysreg-2.l: Likewise. * testsuite/gas/aarch64/illegal-sysreg-2.d: Likewise. * testsuite/gas/aarch64/sysreg-diagnostic.s: New. * testsuite/gas/aarch64/sysreg-diagnostic.l: New. * testsuite/gas/aarch64/sysreg-diagnostic.d: New. include/ PR binutils/21446 * opcode/aarch64.h (F_SYS_READ, F_SYS_WRITE): New. opcodes/ PR binutils/21446 * aarch64-asm.c (opintl.h): Include. (aarch64_ins_sysreg): Enforce read/write constraints. * aarch64-dis.c (aarch64_ext_sysreg): Likewise. * aarch64-opc.h (F_DEPRECATED, F_ARCHEXT, F_HASXT): Moved here. (F_REG_READ, F_REG_WRITE): New. * aarch64-opc.c (aarch64_print_operand): Generate notes for AARCH64_OPND_SYSREG. (F_DEPRECATED, F_ARCHEXT, F_HASXT): Move to aarch64-opc.h. (aarch64_sys_regs): Add constraints to currentel, midr_el1, ctr_el0, mpidr_el1, revidr_el1, aidr_el1, dczid_el0, id_dfr0_el1, id_pfr0_el1, id_pfr1_el1, id_afr0_el1, id_mmfr0_el1, id_mmfr1_el1, id_mmfr2_el1, id_mmfr3_el1, id_mmfr4_el1, id_isar0_el1, id_isar1_el1, id_isar2_el1, id_isar3_el1, id_isar4_el1, id_isar5_el1, mvfr0_el1, mvfr1_el1, mvfr2_el1, ccsidr_el1, id_aa64pfr0_el1, id_aa64pfr1_el1, id_aa64dfr0_el1, id_aa64dfr1_el1, id_aa64isar0_el1, id_aa64isar1_el1, id_aa64mmfr0_el1, id_aa64mmfr1_el1, id_aa64mmfr2_el1, id_aa64afr0_el1, id_aa64afr0_el1, id_aa64afr1_el1, id_aa64zfr0_el1, clidr_el1, csselr_el1, vsesr_el2, erridr_el1, erxfr_el1, rvbar_el1, rvbar_el2, rvbar_el3, isr_el1, tpidrro_el0, cntfrq_el0, cntpct_el0, cntvct_el0, mdccsr_el0, dbgdtrrx_el0, dbgdtrtx_el0, osdtrrx_el1, osdtrtx_el1, mdrar_el1, oslar_el1, oslsr_el1, dbgauthstatus_el1, pmbidr_el1, pmsidr_el1, pmswinc_el0, pmceid0_el0, pmceid1_el0. * aarch64-tbl.h (aarch64_opcode_table): Add constraints to msr (F_SYS_WRITE), mrs (F_SYS_READ).
2018-05-15Allow non-fatal errors to be emitted and for disassembly notes be placed on ↵Tamar Christina3-3/+35
AArch64 This patch adds a new platform option "notes" that can be used to indicate if disassembly notes should be placed in the disassembly as comments. These notes can contain information about a failing constraint such as reading from a write-only register. The disassembly will not be blocked because of this but -M notes will emit a comment saying that the operation is not allowed. For assembly this patch adds a new non-fatal status for errors. This is essentially a warning. The reason for not creating an actual warning type is that this causes the interaction between the ordering of warnings and errors to be problematic. Currently the error buffer is almost always filled because of the way operands are matched during assembly. An earlier template may have put an error there that would only be displayed if no other template matches or generates a higher priority error. But by definition a warning is lower priority than a warning, so the error (which is incorrect if another template matched) will supersede the warning. By treating warnings as errors and only later relaxing the severity this relationship keeps working and the existing reporting infrastructure can be re-used. binutils/ PR binutils/21446 * doc/binutils.texi (-M): Document AArch64 options. * NEWS: Document notes and warnings. gas/ PR binutils/21446 * config/tc-aarch64.c (print_operands): Indicate no notes. (output_operand_error_record): Support non-fatal errors. (output_operand_error_report, warn_unpredictable_ldst, md_assemble): Likewise. include/ PR binutils/21446 * opcode/aarch64.h (aarch64_operand_error): Add non_fatal. (aarch64_print_operand): Support notes. opcodes/ PR binutils/21446 * aarch64-dis.c (no_notes: New. (parse_aarch64_dis_option): Support notes. (aarch64_decode_insn, print_operands): Likewise. (print_aarch64_disassembler_options): Document notes. * aarch64-opc.c (aarch64_print_operand): Support notes.
2018-05-15Modify AArch64 Assembly and disassembly functions to be able to fail and ↵Tamar Christina9-556/+759
report why. This patch if the first patch in a series to add the ability to add constraints to system registers that an instruction must adhere to in order for the register to be usable with that instruction. These constraints can also be used to disambiguate between registers with the same encoding during disassembly. This patch adds a new flags entry in the sysreg structures and ensures it is filled in and read out during assembly/disassembly. It also adds the ability for the assemble and disassemble functions to be able to gracefully fail and re-use the existing error reporting infrastructure. The return type of these functions are changed to a boolean to denote success or failure and the error structure is passed around to them. This requires aarch64-gen changes so a lot of the changes here are just mechanical. gas/ PR binutils/21446 * config/tc-aarch64.c (parse_sys_reg): Return register flags. (parse_operands): Fill in register flags. gdb/ PR binutils/21446 * aarch64-tdep.c (aarch64_analyze_prologue, aarch64_software_single_step, aarch64_displaced_step_copy_insn): Indicate not interested in errors. include/ PR binutils/21446 * opcode/aarch64.h (aarch64_opnd_info): Change sysreg to struct. (aarch64_decode_insn): Accept error struct. opcodes/ PR binutils/21446 * aarch64-asm.h (aarch64_insert_operand, aarch64_##x): Return boolean and take error struct. * aarch64-asm.c (aarch64_ext_regno, aarch64_ins_reglane, aarch64_ins_reglist, aarch64_ins_ldst_reglist, aarch64_ins_ldst_reglist_r, aarch64_ins_ldst_elemlist, aarch64_ins_advsimd_imm_shift, aarch64_ins_imm, aarch64_ins_imm_half, aarch64_ins_advsimd_imm_modified, aarch64_ins_fpimm, aarch64_ins_imm_rotate1, aarch64_ins_imm_rotate2, aarch64_ins_fbits, aarch64_ins_aimm, aarch64_ins_limm_1, aarch64_ins_limm, aarch64_ins_inv_limm, aarch64_ins_ft, aarch64_ins_addr_simple, aarch64_ins_addr_regoff, aarch64_ins_addr_offset, aarch64_ins_addr_simm, aarch64_ins_addr_simm10, aarch64_ins_addr_uimm12, aarch64_ins_simd_addr_post, aarch64_ins_cond, aarch64_ins_sysreg, aarch64_ins_pstatefield, aarch64_ins_sysins_op, aarch64_ins_barrier, aarch64_ins_prfop, aarch64_ins_hint, aarch64_ins_reg_extended, aarch64_ins_reg_shifted, aarch64_ins_sve_addr_ri_s4xvl, aarch64_ins_sve_addr_ri_s6xvl, aarch64_ins_sve_addr_ri_s9xvl, aarch64_ins_sve_addr_ri_s4, aarch64_ins_sve_addr_ri_u6, aarch64_ins_sve_addr_rr_lsl, aarch64_ins_sve_addr_rz_xtw, aarch64_ins_sve_addr_zi_u5, aarch64_ext_sve_addr_zz, aarch64_ins_sve_addr_zz_lsl, aarch64_ins_sve_addr_zz_sxtw, aarch64_ins_sve_addr_zz_uxtw, aarch64_ins_sve_aimm, aarch64_ins_sve_asimm, aarch64_ins_sve_index, aarch64_ins_sve_limm_mov, aarch64_ins_sve_quad_index, aarch64_ins_sve_reglist, aarch64_ins_sve_scale, aarch64_ins_sve_shlimm, aarch64_ins_sve_shrimm, aarch64_ins_sve_float_half_one, aarch64_ins_sve_float_half_two, aarch64_ins_sve_float_zero_one, aarch64_opcode_encode): Likewise. * aarch64-dis.h (aarch64_extract_operand, aarch64_##x): Likewise. * aarch64-dis.c (aarch64_ext_regno, aarch64_ext_reglane, aarch64_ext_reglist, aarch64_ext_ldst_reglist, aarch64_ext_ldst_reglist_r, aarch64_ext_ldst_elemlist, aarch64_ext_advsimd_imm_shift, aarch64_ext_imm, aarch64_ext_imm_half, aarch64_ext_advsimd_imm_modified, aarch64_ext_fpimm, aarch64_ext_imm_rotate1, aarch64_ext_imm_rotate2, aarch64_ext_fbits, aarch64_ext_aimm, aarch64_ext_limm_1, aarch64_ext_limm, decode_limm, aarch64_ext_inv_limm, aarch64_ext_ft, aarch64_ext_addr_simple, aarch64_ext_addr_regoff, aarch64_ext_addr_offset, aarch64_ext_addr_simm, aarch64_ext_addr_simm10, aarch64_ext_addr_uimm12, aarch64_ext_simd_addr_post, aarch64_ext_cond, aarch64_ext_sysreg, aarch64_ext_pstatefield, aarch64_ext_sysins_op, aarch64_ext_barrier, aarch64_ext_prfop, aarch64_ext_hint, aarch64_ext_reg_extended, aarch64_ext_reg_shifted, aarch64_ext_sve_addr_ri_s4xvl, aarch64_ext_sve_addr_ri_s6xvl, aarch64_ext_sve_addr_ri_s9xvl, aarch64_ext_sve_addr_ri_s4, aarch64_ext_sve_addr_ri_u6, aarch64_ext_sve_addr_rr_lsl, aarch64_ext_sve_addr_rz_xtw, aarch64_ext_sve_addr_zi_u5, aarch64_ext_sve_addr_zz, aarch64_ext_sve_addr_zz_lsl, aarch64_ext_sve_addr_zz_sxtw, aarch64_ext_sve_addr_zz_uxtw, aarch64_ext_sve_aimm, aarch64_ext_sve_asimm, aarch64_ext_sve_index, aarch64_ext_sve_limm_mov, aarch64_ext_sve_quad_index, aarch64_ext_sve_reglist, aarch64_ext_sve_scale, aarch64_ext_sve_shlimm, aarch64_ext_sve_shrimm, aarch64_ext_sve_float_half_one, aarch64_ext_sve_float_half_two, aarch64_ext_sve_float_zero_one, aarch64_opcode_decode): Likewise. (determine_disassembling_preference, aarch64_decode_insn, print_insn_aarch64_word, print_insn_data): Take errors struct. (print_insn_aarch64): Use errors. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-gen.c (print_operand_inserter): Use errors and change type to boolean in aarch64_insert_operan. (print_operand_extractor): Likewise. * aarch64-opc.c (aarch64_print_operand): Use sysreg struct.
2018-05-15Fix error messages in the NFP sources when building for 32-bit targets.Francois H. Theron2-45/+44
bfd * targets.c: Wrap nfp_elf64_vec in BFD64 ifdef. include * opcode/nfp.h: Use uint64_t instead of bfd_vma. opcodes * nfp-dis.c: Use uint64_t for instruction variables, not bfd_vma.
2018-05-09x86: Remove Disp<N> from movidir{i,64b}H.J. Lu2-3/+7
* i386-opc.tbl: Remove Disp<N> from movidir{i,64b}.
2018-05-09PR22069, Several instances of register accidentally spelled as regsiterAlan Modra3-2/+7
PR 22069 binutils/ * od-macho.c (dump_unwind_encoding_x86): Adjust for macro renaming. cpu/ChangeLog * or1kcommon.cpu (spr-reg-info): Typo fix. include/ChangeLog * mach-o/unwind.h (MACH_O_UNWIND_X86_64_RBP_FRAME_REGISTERS): Rename from MACH_O_UNWIND_X86_64_RBP_FRAME_REGSITERS. (MACH_O_UNWIND_X86_EBP_FRAME_REGISTERS): Rename from MACH_O_UNWIND_X86_EBP_FRAME_REGSITERS. opcodes/ChangeLog * cr16-opc.c (cr16_instruction): Comment typo fix. * hppa-dis.c (print_insn_hppa): Likewise. sim/ppc/ChangeLog * e500_registers.h: Comment typo fix. * ppc-instructions (ppc_insn_mfcr): Likewise.
2018-05-08RISC-V: Add missing hint instructions from RV128I.Jim Wilson2-9/+54
gas/ * testsuite/gas/riscv/c-zero-imm.d: Add more tests. * testsuite/gas/riscv/c-zero-imm.s: Likewise. * testsuite/gas/riscv/c-zero-reg.d: Fix typo in test. Add disabled future test for RV128 support. * testsuite/gas/riscv/c-zero-reg.s: Likewise. include/ * opcode/riscv-opc.h (MATCH_C_SRLI64, MASK_C_SRLI64): New. (MATCH_C_SRAI64, MASK_C_SRAI64): New. (MATCH_C_SLLI64, MASK_C_SLLI64): New. opcodes/ * riscv-opc.c (match_c_slli, match_slli_as_c_slli): New. (match_c_slli64, match_srxi_as_c_srxi): New. (riscv_opcodes) <slli, sll>: Use match_slli_as_c_slli. <srli, srl, srai, sra>: Use match_srxi_as_c_srxi. <c.slli, c.srli, c.srai>: Use match_s_slli. <c.slli64, c.srli64, c.srai64>: New.
2018-05-08Correct powerpc spe opcode lookupAlan Modra2-6/+12
Defining SPE2_OPCD_SEGS as 13 discounts the possibility that we'd ever look up spe2_opcd_indices[14..16], which I think is possible. Extend that array to size 16+1, using the macros we use to index the array. Similarly use the index macros for PPC_OPCD_SEGS and VLE_OPCD_SEGS. * ppc-dis.c (PPC_OPCD_SEGS): Define using PPC_OP. (VLE_OPCD_SEGS, SPE2_OPCD_SEGS): Similarly, using macros used to partition opcode space for index lookup.
2018-05-07Simplify VLE handling in print_insn_powerpc().Peter Bergner2-35/+26
opcodes/ * ppc-dis.c (print_insn_powerpc) <insn_is_short>: Replace this... <insn_length>: ...with this. Update usage. Remove duplicate call to *info->memory_error_func.
2018-05-07Enable Intel MOVDIRI, MOVDIR64B instructionsH.J. Lu7-5115/+5285
gas/ * config/tc-i386.c (cpu_arch): Add .movdir, .movdir64b. (cpu_noarch): Likewise. (process_suffix): Add check for register size. * doc/c-i386.texi: Document movdiri, movdir64b. * testsuite/gas/i386/i386.exp: Run MOVDIR{I,64B} tests. * testsuite/gas/i386/movdir-intel.d: New file. * testsuite/gas/i386/movdir.d: Likewise. * testsuite/gas/i386/movdir.s: Likewise. * testsuite/gas/i386/movdir64b-reg.s: Likewise. * testsuite/gas/i386/movdir64b-reg.l: Likewise. * testsuite/gas/i386/x86-64-movdir-intel.d: Likewise. * testsuite/gas/i386/x86-64-movdir.d: Likewise. * testsuite/gas/i386/x86-64-movdir.s: Likewise. * testsuite/gas/i386/x86-64-movdir64b-reg.s: Likewise. * testsuite/gas/i386/x86-64-movdir64b-reg.l: Likewise. opcodes/ * i386-dis.c (Gva): New. (enum): Add PREFIX_0F38F8, PREFIX_0F38F9, MOD_0F38F8_PREFIX_2, MOD_0F38F9_PREFIX_0. (prefix_table): New instructions (see prefix above). (mod_table): New instructions (see prefix above). (OP_G): Handle va_mode. * i386-gen.c (cpu_flag_init): Add CPU_MOVDIRI_FLAGS, CPU_MOVDIR64B_FLAGS. (cpu_flags): Add CpuMOVDIRI and CpuMOVDIR64B. * i386-opc.h (enum): Add CpuMOVDIRI, CpuMOVDIR64B. (i386_cpu_flags): Add cpumovdiri and cpumovdir64b. * i386-opc.tbl: Add movidir{i,64b}. * i386-init.h: Regenerated. * i386-tbl.h: Likewise.
2018-05-07x86: Replace AddrPrefixOp0 with AddrPrefixOpRegH.J. Lu4-14/+23
This patch replaces AddrPrefixOp0 with AddrPrefixOpReg to indicate that the size of register operand is controlled by the address size prefix. This will be used by Intel MOVDIRI and MOVDIR64B instructions later. gas/ * config/tc-i386.c (process_suffix): Check addrprefixopreg instead of addrprefixop0. opcodes/ * i386-gen.c (opcode_modifiers): Replace AddrPrefixOp0 with AddrPrefixOpReg. * i386-opc.h (AddrPrefixOp0): Renamed to ... (AddrPrefixOpReg): This. (i386_opcode_modifier): Rename addrprefixop0 to addrprefixopreg. * i386-opc.tbl: Replace AddrPrefixOp0 with AddrPrefixOpReg.
2018-05-07Cleanup ppc code dealing with opcode dumps.Peter Bergner3-44/+39
include/ * opcode/ppc.h (powerpc_num_opcodes): Change type to unsigned. (vle_num_opcodes): Likewise. (spe2_num_opcodes): Likewise. opcodes/ * ppc-opc.c (powerpc_num_opcodes): Likewise. (vle_num_opcodes): Likewise. (spe2_num_opcodes): Likewise. * ppc-dis.c (disassemble_init_powerpc) <powerpc_opcd_indices>: Rewrite initialization loop. (disassemble_init_powerpc) <vle_opcd_indices>: Likewise. (disassemble_init_powerpc) <spe2_opcd_indices>: Likewise. Initialize only once. gas/ * config/tc-ppc.c (ppc_setup_opcodes) <powerpc_opcodes>: Rewrite code to dump the entire opcode table. (ppc_setup_opcodes) <spe2_opcodes>: Likewise. (ppc_setup_opcodes) <vle_opcodes>: Likewise. Fix calculation of opcode index.
2018-05-01Fix unintialized memory in aarch64 opcodes.Tamar Christina2-3/+7
This patch fixes an issue where the memory for the opcode structure is not zero'd before the first exit branch. So there is one failure mode for which uninitialized memory is returned. This causes weird failures when the return code is not checked before inst is used. opcodes/ * aarch64-dis.c (aarch64_opcode_decode): Moved memory clear code.
2018-04-30This patch adds support to objdump for disassembly of NFP (Netronome Flow ↵Francois H. Theron10-207/+3545
Processor) ELF files (.nffw) as well as some basic readelf support. bfd * Makefile.am: Added NFP files to build. * archures.c: Added bfd_arch_nfp * config.bfd: Added NFP support. * configure.ac: Added NFP support. * cpu-nfp.c: New, for NFP support. * elf-bfd.h: Added elf_section_info() * elf64-nfp.c: New, for NFP support. * po/SRC-POTFILES.in: Added NFP source files. * targets.c: Added nfp_elf64_vec * bfd-in2.h: Regenerate. * Makefile.in: Regenerate. * configure: Regenerate. binutils* readelf.c: Very basic support for EM_NFP and its section types. * testsuite/binutils-all/nfp: New directory. * testsuite/binutils-all/nfp/objdump.exp: New file. Run new tests. * testsuite/binutils-all/nfp/test2_ctx8.d: New file. * testsuite/binutils-all/nfp/test2_no-pc_ctx4.d: New file. * testsuite/binutils-all/nfp/test1.d: New file. * testsuite/binutils-all/nfp/nfp6000.nffw: New file. * testsuite/binutils-all/nfp/test2_nfp6000.nffw: New file. * NEWS: Mention the new support. include * dis-asm.h: Added print_nfp_disassembler_options prototype. * elf/common.h: Added EM_NFP, officially assigned. See Google Group Generic System V Application Binary Interface. * elf/nfp.h: New, for NFP support. * opcode/nfp.h: New, for NFP support. opcodes Makefile.am: Added nfp-dis.c. configure.ac: Added bfd_nfp_arch. disassemble.h: Added print_insn_nfp prototype. disassemble.c: Added ARCH_nfp and call to print_insn_nfp nfp-dis.c: New, for NFP support. po/POTFILES.in: Added nfp-dis.c to the list. Makefile.in: Regenerate. configure: Regenerate.
2018-04-27Revert "Enable Intel MOVDIRI, MOVDIR64B instructions."Igor Tsimbalist7-15311/+15097
This reverts commit a914a7c95895161c99533d5919b8504b37ea54a0.
2018-04-26Enable Intel MOVDIRI, MOVDIR64B instructions.Igor Tsimbalist7-15097/+15311
gas/ * config/tc-i386.c (cpu_arch): Add .movdir, .movdir64b. (cpu_noarch): Likewise. (process_suffix): Add check for register size. * doc/c-i386.texi: Document movdiri, movdir64b. * testsuite/gas/i386/i386.exp: Run MOVDIR{I,64B} tests. * testsuite/gas/i386/movdir-intel.d: New test. * testsuite/gas/i386/movdir.d: Likewise. * testsuite/gas/i386/movdir.s: Likewise. * testsuite/gas/i386/movdir64b-reg.s: Likewise. * testsuite/gas/i386/movdir64b-reg.l: Likewise. * testsuite/gas/i386/x86-64-movdir-intel.d: Likewise. * testsuite/gas/i386/x86-64-movdir.d: Likewise. * testsuite/gas/i386/x86-64-movdir.s: Likewise. * testsuite/gas/i386/x86-64-movdir64b-reg.s: Likewise. * testsuite/gas/i386/x86-64-movdir64b-reg.l: Likewise. opcodes/ * i386-dis.c (enum): Add PREFIX_0F38F8, PREFIX_0F38F9. (prefix_table): New instructions (see prefix above). Add Gva macro and handling in OP_G. * i386-gen.c (cpu_flag_init): Add CPU_MOVDIRI_FLAGS, CPU_MOVDIR64B_FLAGS. (cpu_flags): Likewise. (opcode_modifiers): Add AddrPrefixOpReg. (i386_opcode_modifier): Likewise. * i386-opc.h (enum): Add CpuMOVDIRI, CpuMOVDIR64B. (i386_cpu_flags): Likewise. * i386-opc.tbl: Add movidir{i,64b}. * i386-init.h: Regenerate. * i386-tbl.h: Likewise.
2018-04-26x86: fold various non-memory operand AVX512VL templatesJan Beulich3-2028/+570
There's little point carrying up to three templates per insn flavor when the sole difference is operand size and the dependency on AVX512VL being enabled. Instead the need for AVX512VL can be derived from an operand allowing for ZMMword as well as one or both or XMMword and YMMword (irrespective of whether this is a register or memory operand). Without further abstraction to deal with the different Disp8MemShift values between the templates, only a limited set (mostly ones only allowing for non-memory operands) can be folded, which is being done here. Also drop IgnoreSize wherever possible from anything that's being touched anyway.
2018-04-26x86: CpuXSAVE is a prereq for various other featuresJan Beulich3-31/+39
All of AVX, LWP, MPX, and PKU require XSAVE, and hence it as well as XRSTOR should be enabled when enabling these ISA extensions. Leverage these implications to shorten some of the cpu_flag_init[] entries.
2018-04-26x86: drop CpuRegMMX, CpuReg[XYZ]MM, and CpuRegMaskJan Beulich5-5220/+5212
It's not clear to me why they had been introduced - the respective comments in opcodes/i386-gen.c are certainly wrong: ymm<N> registers are very well supported (and necessary) with just AVX512F.
2018-04-26x86: x87-related adjustmentsJan Beulich3-24/+30
Neither 287 wrt 8087 nor 387 wrt 287 are proper supersets - in each case some insns get removed from the ISA (they become NOPs, but code intended for newer co-processors should not use them). Furthermore with .no87, ST should not be recognized as a register name.
generated by cgit v1.1 at 2024-12-26 08:13:16 +0000