aboutsummaryrefslogtreecommitdiff
path: root/opcodes
AgeCommit message (Collapse)AuthorFilesLines
2020-06-09i386-dis.c: Fix a typo in commentsH.J. Lu2-1/+5
* i386-dis.c (prefix_table): Fix a typo in comments.
2020-06-09x86: consistently print prefixes explicitly which are invalid with VEX etcJan Beulich2-13/+11
All of data size, rep, lock, and rex prefixes are invalid with VEX- and alike encoded insns. Make sure they get printed explicitly in all cases, to signal the anomaly. With this, do away with "rex_ignored" - if there is a rex prefix, we want to print it anyway for VEX etc (and there's nothing "ignored" about it in the first place - such an instruction will raise #UD).
2020-06-09x86: fix {,V}MOV{L,H}PD disassemblyJan Beulich2-23/+48
Neither the legacy nor the VEX-encoded forms are permitted with register operands, just like is already the case for their store forms as well as {,V}MOV{L,H}PS. At the same time, besides folding respective vex_len_table[] entries, adjust adjacent related legacy mod_table[] entries: - when the prefix was already decoded, PREFIX_OPCODE is pointless, - limit the amount of string literals by using X consistently on all {,V}MOV{L,H}P{S,D} forms.
2020-06-09x86: utilize X macro in EVEX decodingJan Beulich6-411/+127
For major opcodes allowing only packed FP kinds of operands, i.e. the ones where legacy and AVX decoding uses the X macro, we can do so for AVX512 as well, by attaching to the checking logic the "EVEX.W must match presence of embedded 66 prefix" rule. (Encodings not following this general pattern simply may not gain the PREFIX_OPCODE attribute.) Note that testing of the thus altered decoding has already been put in place by "x86: correct decoding of packed-FP-only AVX encodings". This can also be at least partly applied to scalar-FP-only insns (i.e. V{,U}COMIS{S,D}) as well as the vector-FP forms of insns also allowing scalar encodings (e.g. VADDP{S,D}). Take the opportunity and also fix EVEX-encoded VMOVNTP{S,D} as well as to-memory forms of VMOV{L,H}PS and both forms of VMOV{L,H}PD to wrongly disassemble with only register operands.
2020-06-09x86: correct decoding of packed-FP-only AVX encodingsJan Beulich2-31/+39
Various AVX insns utilizing the X macro fail to reject F3/F2 embedded prefix encodings. As the PREFIX_OPCODE attribute wasn't used by any non-legacy-encoded insns so far, re-use it to achieve the intended effect.
2020-06-09x86: correct mis-named MOD_0F51 enumeratorJan Beulich2-3/+8
This is for extension major opcode 50, so name it accordingly.
2020-06-08[PATCH] arm: Add DFB instruction for ARMv8-RAlex Coplan2-0/+13
gas/ChangeLog: 2020-06-08 Alex Coplan <alex.coplan@arm.com> * config/tc-arm.c (insns): Add dfb. * testsuite/gas/arm/dfb.d: New test. * testsuite/gas/arm/dfb.s: Input for test. opcodes/ChangeLog: 2020-06-08 Alex Coplan <alex.coplan@arm.com> * arm-dis.c (arm_opcodes): Add dfb. (thumb32_opcodes): Add dfb.
2020-06-08x86: restrict use of register aliasesJan Beulich2-1/+5
Register aliases (created e.g. via .set) check their target register at the time of creation of the alias. While this makes sense, it's not enough: The underlying register must also be "visible" at the time of use. Wrong use of such aliases would lead to internal errors in e.g. add_prefix() or build_modrm_byte(). Split the checking part of parse_real_register() into a new helper function and use it also from the latter part of parse_register() (at the same time replacing a minor open coded part of it). Since parse_register() returning NULL already has a meaning, a fake new "bad register" indicator gets added, which all callers need to check for.
2020-06-06Power10 tidiesAlan Modra2-0/+9
binutils/ * doc/binutils.texi (PowerPC -M option): Mention power10 and pwr10. gas/ * config/tc-ppc.c (md_show_usage): Mention -mpower10 and -mpwr10. * doc/c-ppc.texi: Likewise. opcodes/ * ppc-dis.c (ppc_opts): Accept -mpwr10/-Mpwr10.
2020-06-05bpf stack smashing detectedAlan Modra2-5/+11
* cgen-dis.c (hash_insn_array): Increase size of buf. Assert size is large enough.
2020-06-04cpu,gas,opcodes: remove no longer needed workaround from the BPF portJose E. Marchesi5-27/+35
cpu/ChangeLog: 2020-06-02 Jose E. Marchesi <jose.marchesi@oracle.com> * bpf.cpu (define-bpf-isa): Set base-insn-bitsize to 64. * bpf.opc (bpf_print_insn): Do not set endian_code here. gas/ChangeLog: 2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com> * config/tc-bpf.c (md_begin): Pass CGEN_CPU_OPEN_INSN_ENDIAN to bpf_cgen_cpu_open. (md_assemble): Remove no longer needed hack. opcodes/ChangeLog: 2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com> * disassemble.c (disassemble_init_for_target): Set endian_code for bpf targets. * bpf-desc.c: Regenerate. * bpf-opc.c: Likewise. * bpf-dis.c: Likewise.
2020-06-04opcodes: discriminate endianness and insn-endianness in CGEN portsJose E. Marchesi32-98/+145
The CGEN support code in opcodes accesses instruction contents using a couple of functions defined in cgen-opc.c: cgen_get_insn_value and cgen_put_insn_value. These functions use the "instruction endianness" in the CPU description to order the read/written bytes. The process of writing an instruction to the object file is: a) cgen_put_insn_value ;; Writes out the opcodes. b) ARCH_cgen_insert_operand insert_normal insert_1 cgen_put_insn_value ;; Writes out the bytes of the ;; operand. Likewise, the process of reading an instruction from the object file is: a) cgen_get_insn_value ;; Reads the opcodes. b) ARCH_cgen_extract_operand extract_normal extract_1 cgen_get_insn_value ;; Reads in the bytes of the ;; operand. As can be seen above, cgen_{get,put}_insn_value are used to both process the instruction opcodes (the constant fields conforming the base instruction) and also the values of the instruction operands, such as immediates. This is problematic for architectures in which the endianness of instructions is different to the endianness of data. An example is BPF, where instructions are always encoded big-endian but the data may be either big or little. This patch changes the cgen_{get,put}_insn_value functions in order to get an extra argument with the endianness to use, and adapts the existin callers to these functions in order to provide cd->endian or cd->insn_endian, whatever appropriate. Callers like extract_1 and insert_1 pass cd->endian (since they are reading/writing operand values) while callers reading/writing the base instruction pass cd->insn_endian instead. A few little adjustments have been needed in some existing CGEN based ports: * The BPF assembler uses cgen_put_insn_value. It has been adapted to pass the new endian argument. * The mep port has code in mep.opc that uses cgen_{get,put}_insn_value. It has been adapted to pass the new endianargument. Ditto for a call in the assembler. Tested with --enable-targets=all. Regested in all supported targets. No regressions. include/ChangeLog: 2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com> * opcode/cgen.h: Get an `endian' argument in both cgen_get_insn_value and cgen_put_insn_value. opcodes/ChangeLog: 2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com> * cgen-opc.c (cgen_get_insn_value): Get an `endian' argument. (cgen_put_insn_value): Likewise. (cgen_lookup_insn): Pass endianness to cgen_{get,put}_insn_value. * cgen-dis.in (print_insn): Likewise. * cgen-ibld.in (insert_1): Likewise. (insert_1): Likewise. (insert_insn_normal): Likewise. (extract_1): Likewise. * bpf-dis.c: Regenerate. * bpf-ibld.c: Likewise. * bpf-ibld.c: Likewise. * cgen-dis.in: Likewise. * cgen-ibld.in: Likewise. * cgen-opc.c: Likewise. * epiphany-dis.c: Likewise. * epiphany-ibld.c: Likewise. * fr30-dis.c: Likewise. * fr30-ibld.c: Likewise. * frv-dis.c: Likewise. * frv-ibld.c: Likewise. * ip2k-dis.c: Likewise. * ip2k-ibld.c: Likewise. * iq2000-dis.c: Likewise. * iq2000-ibld.c: Likewise. * lm32-dis.c: Likewise. * lm32-ibld.c: Likewise. * m32c-dis.c: Likewise. * m32c-ibld.c: Likewise. * m32r-dis.c: Likewise. * m32r-ibld.c: Likewise. * mep-dis.c: Likewise. * mep-ibld.c: Likewise. * mt-dis.c: Likewise. * mt-ibld.c: Likewise. * or1k-dis.c: Likewise. * or1k-ibld.c: Likewise. * xc16x-dis.c: Likewise. * xc16x-ibld.c: Likewise. * xstormy16-dis.c: Likewise. * xstormy16-ibld.c: Likewise. gas/ChangeLog: 2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com> * cgen.c (gas_cgen_finish_insn): Pass the endianness to cgen_put_insn_value. (gas_cgen_md_apply_fix): Likewise. (gas_cgen_md_apply_fix): Likewise. * config/tc-bpf.c (md_apply_fix): Pass data endianness to cgen_put_insn_value. * config/tc-mep.c (mep_check_ivc2_scheduling): Pass endianness to cgen_put_insn_value. cpu/ChangeLog: 2020-06-02 Jose E. Marchesi <jose.marchesi@oracle.com> * mep.opc (print_slot_insn): Pass the insn endianness to cgen_get_insn_value.
2020-06-04opcodes: support insn endianness in cgen_cpu_openJose E. Marchesi30-70/+236
This patch adds support for a new CGEN_OPEN_INSN_ENDIAN argument for @arch@_cgen_cpu_open. This is useful for architectures in which the endianness of the instruction words is not the same than the endianness used for data. An accompanying patch has been sent to the CGEN mailing list that adds support for this argument on the CGEN side [1]. Its been already pre-approved [2], and will be applied simultaneously with this binutils series. [1] https://sourceware.org/pipermail/cgen/2020q2/002733.html [2] https://sourceware.org/pipermail/cgen/2020q2/002737.html include/ChangeLog: 2020-06-04 Jose E. Marchesi <jemarch@gnu.org> * opcode/cgen.h (enum cgen_cpu_open_arg): New value CGEN_CPU_OPEN_INSN_ENDIAN. opcodes/ChangeLog: 2020-06-04 Jose E. Marchesi <jemarch@gnu.org> * cgen-dis.in (cpu_desc_list): New field `insn_endian'. (print_insn_): Handle instruction endian. * bpf-dis.c: Regenerate. * bpf-desc.c: Regenerate. * epiphany-dis.c: Likewise. * epiphany-desc.c: Likewise. * fr30-dis.c: Likewise. * fr30-desc.c: Likewise. * frv-dis.c: Likewise. * frv-desc.c: Likewise. * ip2k-dis.c: Likewise. * ip2k-desc.c: Likewise. * iq2000-dis.c: Likewise. * iq2000-desc.c: Likewise. * lm32-dis.c: Likewise. * lm32-desc.c: Likewise. * m32c-dis.c: Likewise. * m32c-desc.c: Likewise. * m32r-dis.c: Likewise. * m32r-desc.c: Likewise. * mep-dis.c: Likewise. * mep-desc.c: Likewise. * mt-dis.c: Likewise. * mt-desc.c: Likewise. * or1k-dis.c: Likewise. * or1k-desc.c: Likewise. * xc16x-dis.c: Likewise. * xc16x-desc.c: Likewise. * xstormy16-dis.c: Likewise. * xstormy16-desc.c: Likewise. binutils/ChangeLog: 2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com> * objdump.c (disassemble_data): Set disasm_info.endian_code to disasm_info.endian after the latter is initialized to the endianness reported by BFD.
2020-06-03Updated Serbian translation for the opcodes sub-directoryNick Clifton2-530/+1480
2020-06-03RISC-V: Fix the error when building RISC-V linux native gdbserver.Nelson Chu2-8/+13
The original report is as follow, https://sourceware.org/pipermail/binutils/2020-June/111383.html Inlcude the bfd.h in the include/opcode/riscv.h may cause gdbserver fail to build. I just want to use the `bfd_boolean` in the opcodes/riscv-opc.c, but I didn't realize this cause the build failed. Fortunately, I can also use the `int` as the function return types just like others in the opcodes/riscv-opc.c. include/ * opcode/riscv.h: Remove #include "bfd.h". And change the return types of riscv_get_isa_spec_class and riscv_get_priv_spec_class from bfd_boolean to int. opcodes/ * riscv-opc.c (riscv_get_isa_spec_class): Change bfd_boolean to int. (riscv_get_priv_spec_class): Likewise.
2020-06-01Regen opcodes/bpf-desc.cAlan Modra2-12/+8
The last regen used an old version of cgen. * bpf-desc.c: Regenerate.
2020-05-28cpu,opcodes: add instruction semantics to bpf.cpu and minor fixesJose E. Marchesi5-204/+243
This patch adds semantic RTL descriptions to the eBPF instructions defined in cpu/bpf.cpu. It also contains a couple of minor improvements. Tested in bpf-unknown-none targets. No regressions. cpu/ChangeLog: 2020-05-28 Jose E. Marchesi <jose.marchesi@oracle.com> David Faust <david.faust@oracle.com> * bpf.cpu (define-alu-insn-un): Add definitions of semantics. (define-alu-insn-mov): Likewise. (daib): Likewise. (define-alu-instructions): Likewise. (define-endian-insn): Likewise. (define-lddw): Likewise. (dlabs): Likewise. (dlind): Likewise. (dxli): Likewise. (dxsi): Likewise. (dsti): Likewise. (define-ldstx-insns): Likewise. (define-st-insns): Likewise. (define-cond-jump-insn): Likewise. (dcji): Likewise. (define-condjump-insns): Likewise. (define-call-insn): Likewise. (ja): Likewise. ("exit"): Likewise. (define-atomic-insns): Likewise. (sem-exchange-and-add): New macro. * bpf.cpu ("brkpt"): New instruction. (bpfbf): Set word-bitsize to 32 and insn-endian big. (h-gpr): Prefer r0 to `a' and r6 to `ctx'. (h-pc): Expand definition. * bpf.opc (bpf_print_insn): Set endian_code to BIG. opcodes/ChangeLog: 2020-05-28 Jose E. Marchesi <jose.marchesi@oracle.com> David Faust <david.faust@oracle.com> * bpf-desc.c: Regenerate. * bpf-opc.h: Likewise. * bpf-opc.c: Likewise. * bpf-dis.c: Likewise.
2020-05-28ubsan: nios2: undefined shiftAlan Modra2-11/+10
* nios2-dis.c (nios2_print_insn_arg): Avoid shift left of negative values.
2020-05-28asan: ns32k: use of uninitialized valueAlan Modra2-7/+8
* ns32k-dis.c (print_insn_arg): Handle d value of 'f' for immediates. (print_insn_ns32k): Revert last change.
2020-05-28Fix a potential use of an uninitialised value in the ns32k disassembler.Nick Clifton2-1/+9
* ns32k-dis.c (print_insn_ns32k): Change the arg_bufs array to static.
2020-05-26Fix extraction of signed constants in nios2 disassembler (again).Sandra Loosemore2-8/+25
In commit 6031ac352c05c5c9f44e24fa1c5a8222a7a7d02d I added some casts to explicitly do conversions from unsigned to signed as 32-bit quantities to address some bugs with different sizes of long and bfd_signed_vma. Those casts were removed in the rewrite of the sign-extension logic in commit 1d61b032265e69317f42e8019e072506f11890c5, reintroducing the same bugs. This patch restores the casts. 2020-05-26 Sandra Loosemore <sandra@codesourcery.com> opcodes/ * nios2-dis.c (nios2_print_insn_arg): Add explicit casts to extractions of signed fields.
2020-05-26ChangeLog entries for f687f5f563Stefan Schulze Frielinghaus1-0/+6
2020-05-26S/390: z13: Accept vector alignment hintsStefan Schulze Frielinghaus1-12/+7
Accept vector alignment hints on z13 although they are ignored there. The advantage is that any binary compiled for architecture level z13 may run on z14 or later and benefit from vector alignment hints. gas/ChangeLog: 2020-05-18 Stefan Schulze Frielinghaus <stefansf@linux.ibm.com> * testsuite/gas/s390/zarch-z13.d: Add regexp checks for vector load/store instruction variants with alignment hints. * testsuite/gas/s390/zarch-z13.s: Emit new vector load/store instruction variants with alignment hints. opcodes/ChangeLog: 2020-05-18 Stefan Schulze Frielinghaus <stefansf@linux.ibm.com> * s390-opc.txt: Relocate vector load/store instructions with additional alignment parameter and change architecture level constraint from z14 to z13.
2020-05-21Replace "if (x) free (x)" with "free (x)", opcodesAlan Modra20-194/+88
cpu/ * mep.opc (mep_cgen_expand_macros_and_parse_operand): Replace "if (x) free (x)" with "free (x)". opcodes/ * arc-ext.c: Replace "if (x) free (x)" with "free (x)" throughout. * sparc-dis.c: Likewise. * tic4x-dis.c: Likewise. * xtensa-dis.c: Likewise. * bpf-desc.c: Regenerate. * epiphany-desc.c: Regenerate. * fr30-desc.c: Regenerate. * frv-desc.c: Regenerate. * ip2k-desc.c: Regenerate. * iq2000-desc.c: Regenerate. * lm32-desc.c: Regenerate. * m32c-desc.c: Regenerate. * m32r-desc.c: Regenerate. * mep-asm.c: Regenerate. * mep-desc.c: Regenerate. * mt-desc.c: Regenerate. * or1k-desc.c: Regenerate. * xc16x-desc.c: Regenerate. * xstormy16-desc.c: Regenerate.
2020-05-20[PATCH v2 0/9] RISC-V: Support version controling for ISA standard ↵Nelson Chu4-63/+331
extensions and CSR 1. Remove the -mriscv-isa-version and --with-riscv-isa-version options. We can still use -march to choose the version for each extensions, so there is no need to add these. 2. Change the arguments of options from [1p9|1p9p1|...] to [1.9|1.9.1|...]. Unlike the architecture string has specified by spec, ther is no need to do the same thing for options. 3. Spilt the patches to reduce the burdens of review. [PATCH 3/7] RISC-V: Support new GAS options and configure options to set ISA versions to [PATCH v2 3/9] RISC-V: Support GAS option -misa-spec to set ISA versions [PATCH v2 4/9] RISC-V: Support configure options to set ISA versions by default. [PATCH 4/7] RISC-V: Support version checking for CSR according to privilege version. to [PATCH v2 5/9] RISC-V: Support version checking for CSR according to privilege spec version. [PATCH v2 6/9] RISC-V: Support configure option to choose the privilege spec version. 4. Use enum class rather than string to compare the choosen ISA spec in opcodes/riscv-opc.c. The behavior is same as comparing the choosen privilege spec. include * opcode/riscv.h: Include "bfd.h" to support bfd_boolean. (enum riscv_isa_spec_class): New enum class. All supported ISA spec belong to one of the class (struct riscv_ext_version): New structure holds version information for the specific ISA. * opcode/riscv-opc.h (DECLARE_CSR): There are two version information, define_version and abort_version. The define_version means which privilege spec is started to define the CSR, and the abort_version means which privilege spec is started to abort the CSR. If the CSR is valid for the newest spec, then the abort_version should be PRIV_SPEC_CLASS_DRAFT. (DECLARE_CSR_ALIAS): Same as DECLARE_CSR, but only for the obselete CSR. * opcode/riscv.h (enum riscv_priv_spec_class): New enum class. Define the current supported privilege spec versions. (struct riscv_csr_extra): Add new fields to store more information about the CSR. We use these information to find the suitable CSR address when user choosing a specific privilege spec. binutils * dwarf.c: Updated since DECLARE_CSR is changed. opcodes * riscv-opc.c (riscv_ext_version_table): The table used to store all information about the supported spec and the corresponding ISA versions. Currently, only Zicsr is supported to verify the correctness of Z sub extension settings. Others will be supported in the future patches. (struct isa_spec_t, isa_specs): List for all supported ISA spec classes and the corresponding strings. (riscv_get_isa_spec_class): New function. Get the corresponding ISA spec class by giving a ISA spec string. * riscv-opc.c (struct priv_spec_t): New structure. (struct priv_spec_t priv_specs): List for all supported privilege spec classes and the corresponding strings. (riscv_get_priv_spec_class): New function. Get the corresponding privilege spec class by giving a spec string. (riscv_get_priv_spec_name): New function. Get the corresponding privilege spec string by giving a CSR version class. * riscv-dis.c: Updated since DECLARE_CSR is changed. * riscv-dis.c: Add new disassembler option -Mpriv-spec to dump the CSR according to the chosen version. Build a hash table riscv_csr_hash to store the valid CSR for the chosen pirv verison. Dump the direct CSR address rather than it's name if it is invalid. (parse_riscv_dis_option_without_args): New function. Parse the options without arguments. (parse_riscv_dis_option): Call parse_riscv_dis_option_without_args to parse the options without arguments first, and then handle the options with arguments. Add the new option -Mpriv-spec, which has argument. * riscv-dis.c (print_riscv_disassembler_options): Add description about the new OBJDUMP option. ld * testsuite/ld-riscv-elf/attr-merge-arch-01.d: Updated priv attributes according to the -mpriv-spec option. * testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-priv-spec-a.s: Likewise. * testsuite/ld-riscv-elf/attr-merge-priv-spec-b.s: Likewise. * testsuite/ld-riscv-elf/attr-merge-priv-spec.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-stack-align.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-strict-align-01.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-strict-align-02.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-strict-align-03.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-strict-align-04.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-strict-align-05.d: Likewise. bfd * elfxx-riscv.h (riscv_parse_subset_t): Add new callback function get_default_version. It is used to find the default version for the specific extension. * elfxx-riscv.c (riscv_parsing_subset_version): Remove the parameters default_major_version and default_minor_version. Add new bfd_boolean parameter *use_default_version. Set it to TRUE if we need to call the callback rps->get_default_version to find the default version. (riscv_parse_std_ext): Call rps->get_default_version if we fail to find the default version in riscv_parsing_subset_version, and then call riscv_add_subset to add the subset into subset list. (riscv_parse_prefixed_ext): Likewise. (riscv_std_z_ext_strtab): Support Zicsr extensions. * elfnn-riscv.c (riscv_merge_std_ext): Use strcasecmp to compare the strings rather than characters. riscv_merge_arch_attr_info): The callback function get_default_version is only needed for assembler, so set it to NULL int the linker. * elfxx-riscv.c (riscv_estimate_digit): Remove the static. * elfxx-riscv.h: Updated. gas * testsuite/gas/riscv/priv-reg-fail-read-only-01.s: Updated. * config/tc-riscv.c (default_arch_with_ext, default_isa_spec): Static variables which are used to set the ISA extensions. You can use -march (or ELF build attributes) and -misa-spec to set them, respectively. (ext_version_hash): The hash table used to handle the extensions with versions. (init_ext_version_hash): Initialize the ext_version_hash according to riscv_ext_version_table. (riscv_get_default_ext_version): The callback function of riscv_parse_subset_t. According to the choosed ISA spec, get the default version for the specific extension. (riscv_set_arch): Set the callback function. (enum options, struct option md_longopts): Add new option -misa-spec. (md_parse_option): Do not call riscv_set_arch for -march. We will call it later in riscv_after_parse_args. Call riscv_get_isa_spec_class to set default_isa_spec class. (riscv_after_parse_args): Call init_ext_version_hash to initialize the ext_version_hash, and then call riscv_set_arch to set the architecture with versions according to default_arch_with_ext. * testsuite/gas/riscv/attribute-02.d: Set 0p0 as default version for x extensions. * testsuite/gas/riscv/attribute-03.d: Likewise. * testsuite/gas/riscv/attribute-09.d: New testcase. For i-ext, we already set it's version to 2p1 by march, so no need to use the default 2p2 version. For m-ext, we do not set the version by -march and ELF arch attribute, so set the default 2p0 to it. For zicsr, it is not defined in ISA spec 2p2, so set 0p0 to it. * testsuite/gas/riscv/attribute-10.d: New testcase. The version of zicsr is 2p0 according to ISA spec 20191213. * config/tc-riscv.c (DEFAULT_RISCV_ARCH_WITH_EXT) (DEFAULT_RISCV_ISA_SPEC): Default configure option settings. You can set them by configure options --with-arch and --with-isa-spec, respectively. (riscv_set_default_isa_spec): New function used to set the default ISA spec. (md_parse_option): Call riscv_set_default_isa_spec rather than call riscv_get_isa_spec_class directly. (riscv_after_parse_args): If the -isa-spec is not set, then we set the default ISA spec according to DEFAULT_RISCV_ISA_SPEC by calling riscv_set_default_isa_spec. * testsuite/gas/riscv/attribute-01.d: Add -misa-spec=2.2, since the --with-isa-spec may be set to different ISA spec. * testsuite/gas/riscv/attribute-02.d: Likewise. * testsuite/gas/riscv/attribute-03.d: Likewise. * testsuite/gas/riscv/attribute-04.d: Likewise. * testsuite/gas/riscv/attribute-05.d: Likewise. * testsuite/gas/riscv/attribute-06.d: Likewise. * testsuite/gas/riscv/attribute-07.d: Likewise. * configure.ac: Add configure options, --with-arch and --with-isa-spec. * configure: Regenerated. * config.in: Regenerated. * config/tc-riscv.c (default_priv_spec): Static variable which is used to check if the CSR is valid for the chosen privilege spec. You can use -mpriv-spec to set it. (enum reg_class): We now get the CSR address from csr_extra_hash rather than reg_names_hash. Therefore, move RCLASS_CSR behind RCLASS_MAX. (riscv_init_csr_hashes): Only need to initialize one hash table csr_extra_hash. (riscv_csr_class_check): Change the return type to void. Don't check the ISA dependency if -mcsr-check isn't set. (riscv_csr_version_check): New function. Check and find the CSR address from csr_extra_hash, according to default_priv_spec. Report warning for the invalid CSR if -mcsr-check is set. (reg_csr_lookup_internal): Updated. (reg_lookup_internal): Likewise. (md_begin): Updated since DECLARE_CSR and DECLARE_CSR_ALIAS are changed. (enum options, struct option md_longopts): Add new GAS option -mpriv-spec. (md_parse_option): Call riscv_set_default_priv_version to set default_priv_spec. (riscv_after_parse_args): If -mpriv-spec isn't set, then set the default privilege spec to the newest one. (enum riscv_csr_class, struct riscv_csr_extra): Move them to include/opcode/riscv.h. * testsuite/gas/riscv/priv-reg-fail-fext.d: This test case just want to check the ISA dependency for CSR, so fix the spec version by adding -mpriv-spec=1.11. * testsuite/gas/riscv/priv-reg-fail-fext.l: Likewise. There are some version warnings for the test case. * gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.d: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-read-only-02.d: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.d: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.d: New test case. Check whether the CSR is valid when privilege version 1.9 is choosed. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.l: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: New test case. Check whether the CSR is valid when privilege version 1.9.1 is choosed. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.d: New test case. Check whether the CSR is valid when privilege version 1.10 is choosed. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.d: New test case. Check whether the CSR is valid when privilege version 1.11 is choosed. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise. * config/tc-riscv.c (DEFAULT_RISCV_ISA_SPEC): Default configure option setting. You can set it by configure option --with-priv-spec. (riscv_set_default_priv_spec): New function used to set the default privilege spec. (md_parse_option): Call riscv_set_default_priv_spec rather than call riscv_get_priv_spec_class directly. (riscv_after_parse_args): If -mpriv-spec isn't set, then we set the default privilege spec according to DEFAULT_RISCV_PRIV_SPEC by calling riscv_set_default_priv_spec. * testsuite/gas/riscv/csr-dw-regnums.d: Add -mpriv-spec=1.11, since the --with-priv-spec may be set to different privilege spec. * testsuite/gas/riscv/priv-reg.d: Likewise. * configure.ac: Add configure option --with-priv-spec. * configure: Regenerated. * config.in: Regenerated. * config/tc-riscv.c (explicit_attr): Rename explicit_arch_attr to explicit_attr. Set it to TRUE if any ELF attribute is found. (riscv_set_default_priv_spec): Try to set the default_priv_spec if the priv attributes are set. (md_assemble): Set the default_priv_spec according to the priv attributes when we start to assemble instruction. (riscv_write_out_attrs): Rename riscv_write_out_arch_attr to riscv_write_out_attrs. Update the arch and priv attributes. If we don't set the corresponding ELF attributes, then try to output the default ones. (riscv_set_public_attributes): If any ELF attribute or -march-attr options is set (explicit_attr is TRUE), then call riscv_write_out_attrs to update the arch and priv attributes. (s_riscv_attribute): Make sure all arch and priv attributes are set before any instruction. * testsuite/gas/riscv/attribute-01.d: Update the priv attributes if any ELF attribute or -march-attr is set. If the priv attributes are not set, then try to update them by the default setting (-mpriv-spec or --with-priv-spec). * testsuite/gas/riscv/attribute-02.d: Likewise. * testsuite/gas/riscv/attribute-03.d: Likewise. * testsuite/gas/riscv/attribute-04.d: Likewise. * testsuite/gas/riscv/attribute-06.d: Likewise. * testsuite/gas/riscv/attribute-07.d: Likewise. * testsuite/gas/riscv/attribute-08.d: Likewise. * testsuite/gas/riscv/attribute-09.d: Likewise. * testsuite/gas/riscv/attribute-10.d: Likewise. * testsuite/gas/riscv/attribute-unknown.d: Likewise. * testsuite/gas/riscv/attribute-05.d: Likewise. Also, the priv spec set by priv attributes must be supported. * testsuite/gas/riscv/attribute-05.s: Likewise. * testsuite/gas/riscv/priv-reg-fail-version-1p9.d: Likewise. Updated priv attributes according to the -mpriv-spec option. * testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: Likewise. * testsuite/gas/riscv/priv-reg-fail-version-1p10.d: Likewise. * testsuite/gas/riscv/priv-reg-fail-version-1p11.d: Likewise. * testsuite/gas/riscv/priv-reg.d: Removed. * testsuite/gas/riscv/priv-reg-version-1p9.d: New test case. Dump the CSR according to the priv spec 1.9. * testsuite/gas/riscv/priv-reg-version-1p9p1.d: New test case. Dump the CSR according to the priv spec 1.9.1. * testsuite/gas/riscv/priv-reg-version-1p10.d: New test case. Dump the CSR according to the priv spec 1.10. * testsuite/gas/riscv/priv-reg-version-1p11.d: New test case. Dump the CSR according to the priv spec 1.11. * config/tc-riscv.c (md_show_usage): Add descriptions about the new GAS options. * doc/c-riscv.texi: Likewise.
2020-05-19Power10 dcbf, sync, and wait extensions.Peter Bergner2-26/+243
opcodes/ * ppc-opc.c (insert_ls, extract_ls): Handle 3-bit L fields and new WC values on POWER10 sync, dcbf and wait instructions. (insert_pl, extract_pl): New functions. (L2OPT, LS, WC): Use insert_ls and extract_ls. (LS3): New , 3-bit L for sync. (LS3, L3OPT): New, 3-bit L for sync and dcbf. (SC2, PL): New, 2-bit SC and PL for sync and wait. (XWCPL_MASK, XL3RT_MASK, XSYNCLS_MASK): New instruction masks. (XOPL3, XWCPL, XSYNCLS): New opcode macros. (powerpc_opcodes) <dcbflp, dcbfps, dcbstps pause_short, phwsync, plwsync, stcisync, stncisync, stsync, waitrsv>: New extended mnemonics. <wait>: Enable PL operand on POWER10. <dcbf>: Enable L3OPT operand on POWER10. <sync>: Enable SC2 operand on POWER10. gas/ * testsuite/gas/ppc/power9.s <dcbf, dcbfl, dcbflp>: Add tests. * testsuite/gas/ppc/power9.d: Likewise. * testsuite/gas/ppc/power10.s <dcbf, dcbfps, dcbstps, hwsync, lwsync, pause_short, phwsync, plwsync, ptesync, stcisync, stncisync, stsync, sync, wait, waitrsv>: Add tests. * testsuite/gas/ppc/power10.d: Likewise.
2020-05-19or1k: Regenerate opcodes after removing 32-bit supportStafford Horne9-1648/+1195
opcodes/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> PR 25184 * or1k-asm.c: Regenerate. * or1k-desc.c: Regenerate. * or1k-desc.h: Regenerate. * or1k-dis.c: Regenerate. * or1k-ibld.c: Regenerate. * or1k-opc.c: Regenerate. * or1k-opc.h: Regenerate. * or1k-opinst.c: Regenerate.
2020-05-11Power10 VSX scalar min-max-compare quad precision operationsAlan Modra2-0/+16
opcodes/ * ppc-opc (powerpc_opcodes): Add xscmpeqqp, xscmpgeqp, xscmpgtqp, xsmaxcqp, xsmincqp. gas/ * testsuite/gas/ppc/scalarquad.d, * testsuite/gas/ppc/scalarquad.s: New test. * testsuite/gas/ppc/ppc.exp: Run it.
2020-05-11Power10 VSX load/store rightmost element operationsAlan Modra2-0/+21
opcodes/ * ppc-opc.c (powerpc_opcodes): Add lxvrbx, lxvrhx, lxvrwx, lxvrdx, stxvrbx, stxvrhx, stxvrwx, stxvrdx. gas/ * testsuite/gas/ppc/rightmost.d, * testsuite/gas/ppc/rightmost.s: New test. * testsuite/gas/ppc/ppc.exp: Run it.
2020-05-11Power10 test lsb by byte operationAlan Modra2-0/+5
opcodes/ * ppc-opc.c (powerpc_opcodes): Add xvtlsbb. gas/ * testsuite/gas/ppc/xvtlsbb.d, * testsuite/gas/ppc/xvtlsbb.s: New test. * testsuite/gas/ppc/ppc.exp: Run it.
2020-05-11Power10 string operationsAlan Modra2-0/+15
opcodes/ * ppc-opc.c (powerpc_opcodes): Add vstribl, vstribr, vstrihl, vstrihr, vclrlb, vclrrb, vstribl., vstribr., vstrihl., vstrihr.. gas/ * testsuite/gas/ppc/stringop.d, * testsuite/gas/ppc/stringop.s: New test. * testsuite/gas/ppc/ppc.exp: Run it.
2020-05-11Power10 Set boolean extensionPeter Bergner2-0/+13
opcodes/ * ppc-opc.c (powerpc_opcodes) <setbc, setbcr, setnbc, setnbcr>: New mnemonics. gas/ * testsuite/gas/ppc/set_bool.d, * testsuite/gas/ppc/set_bool.s: New test. * testsuite/gas/ppc/ppc.exp: Run it.
2020-05-11Power10 bit manipulation operationsAlan Modra2-1/+27
opcodes/ * ppc-opc.c (UIM8, P_U8XX4_MASK): Define. (powerpc_opcodes): Add vgnb, vcfuged, vpextd, vpdepd, vclzdm, vctzdm, cntlzdm, pdepd, pextd, cfuged, cnttzdm. (prefix_opcodes): Add xxeval. gas/ * testsuite/gas/ppc/bitmanip.d, * testsuite/gas/ppc/bitmanip.s: New test. * testsuite/gas/ppc/ppc.exp: Run it.
2020-05-11Power10 VSX PCV generate operationsAlan Modra2-0/+9
opcodes/ * ppc-opc.c (powerpc_opcodes): Add xxgenpcvbm, xxgenpcvhm, xxgenpcvwm, xxgenpcvdm. gas/ * testsuite/gas/ppc/genpcv.d, * testsuite/gas/ppc/genpcv.s: New test. * testsuite/gas/ppc/ppc.exp: Run it.
2020-05-11Power10 VSX Mask Manipulation OperationsAlan Modra2-1/+36
opcodes/ * ppc-opc.c (MP, VXVAM_MASK): Define. (VXVAPS_MASK): Use VXVA_MASK. (powerpc_opcodes): Add mtvsrbmi, vexpandbm, vexpandhm, vexpandwm, vexpanddm, vexpandqm, vextractbm, vextracthm, vextractwm, vextractdm, vextractqm, mtvsrbm, mtvsrhm, mtvsrwm, mtvsrdm, mtvsrqm, vcntmbb, vcntmbh, vcntmbw, vcntmbd. gas/ * testsuite/gas/ppc/maskmanip.d, * testsuite/gas/ppc/maskmanip.s: New test. * testsuite/gas/ppc/ppc.exp: Run it.
2020-05-11Power10 Reduced precision outer product operationsAlan Modra3-4/+231
include/ * opcode/ppc.h (PPC_OPERAND_ACC): Define. Renumber following PPC_OPERAND defines. opcodes/ * ppc-opc.c (insert_xa6a, extract_xa6a, insert_xb6a, extract_xb6a): New functions. (powerpc_operands): Define ACC, PMSK8, PMSK4, PMSK2, XMSK, YMSK, YMSK2, XA6a, XA6ap, XB6a entries. (PMMIRR, P_X_MASK, P_XX1_MASK, P_GER_MASK): Define (P_GER2_MASK, P_GER4_MASK, P_GER8_MASK, P_GER64_MASK): Define. (PPCVSX4): Define. (powerpc_opcodes): Add xxmfacc, xxmtacc, xxsetaccz, xvi8ger4pp, xvi8ger4, xvf16ger2pp, xvf16ger2, xvf32gerpp, xvf32ger, xvi4ger8pp, xvi4ger8, xvi16ger2spp, xvi16ger2s, xvbf16ger2pp, xvbf16ger2, xvf64gerpp, xvf64ger, xvi16ger2, xvf16ger2np, xvf32gernp, xvi8ger4spp, xvi16ger2pp, xvbf16ger2np, xvf64gernp, xvf16ger2pn, xvf32gerpn, xvbf16ger2pn, xvf64gerpn, xvf16ger2nn, xvf32gernn, xvbf16ger2nn, xvf64gernn, xvcvbf16sp, xvcvspbf16. (prefix_opcodes): Add pmxvi8ger4pp, pmxvi8ger4, pmxvf16ger2pp, pmxvf16ger2, pmxvf32gerpp, pmxvf32ger, pmxvi4ger8pp, pmxvi4ger8, pmxvi16ger2spp, pmxvi16ger2s, pmxvbf16ger2pp, pmxvbf16ger2, pmxvf64gerpp, pmxvf64ger, pmxvi16ger2, pmxvf16ger2np, pmxvf32gernp, pmxvi8ger4spp, pmxvi16ger2pp, pmxvbf16ger2np, pmxvf64gernp, pmxvf16ger2pn, pmxvf32gerpn, pmxvbf16ger2pn, pmxvf64gerpn, pmxvf16ger2nn, pmxvf32gernn, pmxvbf16ger2nn, pmxvf64gernn. gas/ * config/tc-ppc.c (pre_defined_registers): Add accumulators. (md_assemble): Check acc specified in correct operand. * testsuite/gas/ppc/outerprod.d, * testsuite/gas/ppc/outerprod.s, * testsuite/gas/ppc/vsx4.d, * testsuite/gas/ppc/vsx4.s: New tests. * testsuite/gas/ppc/ppc.exp: Run them.
2020-05-11Power10 SIMD permute class operationsAlan Modra2-3/+129
opcodes/ * ppc-opc.c (insert_imm32, extract_imm32): New functions. (insert_xts, extract_xts): New functions. (IMM32, UIM3, IX, UIM5, SH3, XTS, P8RR): Define. (P_XX4_MASK, P_UXX4_MASK, VSOP, P_VS_MASK, P_VSI_MASK): Define. (VXRC_MASK, VXSH_MASK): Define. (powerpc_opcodes): Add vinsbvlx, vsldbi, vextdubvlx, vextdubvrx, vextduhvlx, vextduhvrx, vextduwvlx, vextduwvrx, vextddvlx, vextddvrx, vinshvlx, vinswvlx, vinsw, vinsbvrx, vinshvrx, vinswvrx, vinsd, vinsblx, vsrdbi, vinshlx, vinswlx, vinsdlx, vinsbrx, vinshrx, vinswrx, vinsdrx, lxvkq. (prefix_opcodes): Add xxsplti32dx, xxspltidp, xxspltiw, xxblendvb, xxblendvh, xxblendvw, xxblendvd, xxpermx. gas/ * testsuite/gas/ppc/simd_perm.d, * testsuite/gas/ppc/simd_perm.s: New test. * testsuite/gas/ppc/ppc.exp: Run it.
2020-05-11Power10 128-bit binary integer operationsAlan Modra2-0/+44
opcodes/ * ppc-opc.c (powerpc_opcodes): Add vrlq, vdivuq, vmsumcud, vrlqmi, vmuloud, vcmpuq, vslq, vdivsq, vcmpsq, vrlqnm, vcmpequq, vmulosd, vsrq, vdiveuq, vcmpgtuq, vmuleud, vsraq, vdivesq, vcmpgtsq, vmulesd, vcmpequq., vextsd2q, vmoduq, vcmpgtuq., vmodsq, vcmpgtsq., xscvqpuqz, xscvuqqp, xscvqpsqz, xscvsqqp, dcffixqq, dctfixqq. gas/ * testsuite/gas/ppc/int128.d, * testsuite/gas/ppc/int128.s: New test. * testsuite/gas/ppc/ppc.exp: Run it.
2020-05-11Power10 VSX 32-byte storage accessAlan Modra2-1/+44
bfd/ * elf64-ppc.c (xlate_pcrel_opt): Handle lxvp and stxvp. opcodes/ * ppc-opc.c (insert_xtp, extract_xtp): New functions. (XTP, DQXP, DQXP_MASK): Define. (powerpc_opcodes): Add lxvp, stxvp, lxvpx, stxvpx. (prefix_opcodes): Add plxvp and pstxvp. gas/ * testsuite/gas/ppc/vsx_32byte.d, * testsuite/gas/ppc/vsx_32byte.s: New test. * testsuite/gas/ppc/ppc.exp: Run it. ld/ * testsuite/ld-powerpc/pcrelopt.s: Add lxvp and stxvp. * testsuite/ld-powerpc/pcrelopt.d: Update.
2020-05-11Power10 vector integer multiply, divide, modulo insnsAlan Modra2-0/+23
opcodes/ * ppc-opc.c (powerpc_opcodes): Add vdivuw, vdivud, vdivsw, vmulld, vdivsd, vmulhuw, vdiveuw, vmulhud, vdiveud, vmulhsw, vdivesw, vmulhsd, vdivesd, vmoduw, vmodud, vmodsw, vmodsd. gas/ * testsuite/gas/ppc/vec_mul.s, * testsuite/gas/ppc/vec_mul.d: New test. * testsuite/gas/ppc/ppc.exp: Run it.
2020-05-11Power10 byte reverse instructionsPeter Bergner2-0/+10
opcodes/ * ppc-opc.c (powerpc_opcodes) <brd, brh, brw>: New mnemonics. gas/ * testsuite/gas/ppc/byte_rev.d, * testsuite/gas/ppc/byte_rev.s: New test. * testsuite/gas/ppc/ppc.exp: Run it.
2020-05-11Power10 Copy/Paste ExtensionsPeter Bergner2-2/+37
opcodes/ * opcodes/ppc-opc.c (insert_l1opt, extract_l1opt): New functions. (L1OPT): Define. (powerpc_opcodes) <paste.>: Add L operand for cpu POWER10. gas/ * testsuite/gas/ppc/power10.d: Add paste. tests. * testsuite/gas/ppc/power10.s: Likewise.
2020-05-11Power10 Add new L operand to the slbiag instructionPeter Bergner2-1/+7
opcodes/ * ppc-opc.c (powerpc_opcodes) <slbiag>: Add variant with L operand. gas/ * testsuite/gas/ppc/power10.s: New test. * testsuite/gas/ppc/power10.d: Likewise. * testsuite/gas/ppc/ppc.exp: Run it.
2020-05-11PowerPC Default disassembler to -Mpower10Alan Modra2-1/+5
* ppc-dis.c (powerpc_init_dialect): Default to "power10".
2020-05-11PowerPC Rename powerxx to power10Alan Modra3-30/+41
Now that ISA3.1 is out we can finish with the powerxx silliness. bfd/ * elf64-ppc.c: Rename powerxx to power10 throughout. gas/ * config/tc-ppc.c (md_assemble): Update for PPC_OPCODE_POWER10 renaming. * testsuite/gas/ppc/prefix-align.d: Use -mpower10/-Mpower10 in place of -mfuture/-Mfuture. * testsuite/gas/ppc/prefix-pcrel.d: Likewise. * testsuite/gas/ppc/prefix-reloc.d: Likewise. gold/ * powerpc.cc: Rename powerxx to power10 throughout. include/ * elf/ppc64.h: Update comment. * opcode/ppc.h (PPC_OPCODE_POWER10): Rename from PPC_OPCODE_POWERXX. ld/ * testsuite/ld-powerpc/callstub-1.d: Use -mpower10/-Mpower10 in place of -mfuture/-Mfuture. * testsuite/ld-powerpc/notoc2.d: Likewise. * testsuite/ld-powerpc/powerpc.exp: Likewise. * testsuite/ld-powerpc/tlsgd.d: Likewise. * testsuite/ld-powerpc/tlsie.d: Likewise. * testsuite/ld-powerpc/tlsld.d: Likewise. opcodes/ * ppc-dis.c (ppc_opts): Add "power10" entry. (print_insn_powerpc): Update for PPC_OPCODE_POWER10 renaming. * ppc-opc.c (POWER10): Rename from POWERXX. Update all uses.
2020-05-11Updated French translation for the ld sub-directory and an update Spanish ↵Nick Clifton2-349/+455
translation for the opcodes subdirectory.
2020-04-30AArch64: add GAS support for UDF instructionAlex Coplan8-2477/+2541
binutils * testsuite/binutils-all/aarch64/in-order-all.d: Update to use new disassembly. * testsuite/binutils-all/aarch64/out-of-order-all.d: Likewise. ld/ * testsuite/ld-aarch64/erratum843419_tls_ie.d: Use udf in disassembly. * testsuite/ld-aarch64/farcall-b-section.d: Likewise. * testsuite/ld-aarch64/farcall-back.d: Likewise. * testsuite/ld-aarch64/farcall-bl-section.d: Likewise. gas/ * config/tc-aarch64.c (fix_insn): Implement for AARCH64_OPND_UNDEFINED. (parse_operands): Implement for AARCH64_OPND_UNDEFINED. * testsuite/gas/aarch64/udf.s: New. * testsuite/gas/aarch64/udf.d: New. * testsuite/gas/aarch64/udf-invalid.s: New. * testsuite/gas/aarch64/udf-invalid.l: New. * testsuite/gas/aarch64/udf-invalid.d: New. include * opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_UNDEFINED. opcodes * aarch64-opc.h (enum aarch64_field_kind): Add FLD_imm16_2. * aarch64-opc.c (fields): Add entry for FLD_imm16_2. (operand_general_constraint_met_p): validate AARCH64_OPND_UNDEFINED. * aarch64-tbl.h (aarch64_opcode_table): Add udf instruction, entry for FLD_imm16_2. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated.
2020-04-29Also use unsigned 8-bit immediate values for the LDRC and SETRC insns.Nick Clifton2-2/+8
PR 22699 * sh-opc.h: Also use unsigned 8-bit immediate values for the LDRC and SETRC insns.
2020-04-29Updated Serbian translation for the binutils sub-directory, and Swedish ↵Nick Clifton2-351/+457
translation for the opcodes sub-directory.
2020-04-29Fix the disassmbly of SH instructions which have an unsigned 8-bit immediate ↵Nick Clifton3-18/+31
operand. PR 22699 opcodes * sh-opc.h (IMM0_8): Replace with IMM0_8S and IMM0_8U. Use IMM0_8S for arithmetic insns and IMM0_8U for logical insns. * sh-dis.c (print_insn_sh): Change IMM0_8 case to IMM0_8S and add IMM0_8U case. gas * config/tc-sh.c (build_Mytes): Change operand type IMM0_8 to IMM0_8S and add support for IMM0_8U. * testsuite/gas/sh/sh4a.s: Add test of a logical insn using an unsigned 8-bit immediate. * testsuite/gas/sh/sh4a.d: Extended expected disassembly.
generated by cgit v1.1 at 2025-01-27 00:13:32 +0000