aboutsummaryrefslogtreecommitdiff
path: root/opcodes/ppc-dis.c
AgeCommit message (Collapse)AuthorFilesLines
2019-12-10Remove backup ppc struct dis_private.Alan Modra1-3/+4
ppc-dis.c used a global struct whenever malloc failed to provide the eight bytes of memory necessary for struct dis_private. Which is quite ridiculous. If that malloc failed there is zero chance some other malloc won't fail too. * ppc-dis.c (private): Delete variable. (get_powerpc_dialect): Don't segfault on NULL info->private_data. (powerpc_init_dialect): Don't use global private.
2019-06-03Don't waste space in prefix_opcd_indicesAlan Modra1-1/+1
* ppc-dis.c (prefix_opcd_indices): Correct size.
2019-05-24PowerPC add initial -mfuture instruction supportPeter Bergner1-1/+92
This patch adds initial 64-bit insn assembler/disassembler support. The only instruction added is "pnop" along with the automatic aligning of prefix instruction so they do not cross 64-byte boundaries. include/ * dis-asm.h (WIDE_OUTPUT): Define. * opcode/ppc.h (prefix_opcodes, prefix_num_opcodes): Declare. (PPC_OPCODE_POWERXX, PPC_GET_PREFIX, PPC_GET_SUFFIX), (PPC_PREFIX_P, PPC_PREFIX_SEG): Define. opcodes/ * ppc-dis.c (ppc_opts): Add "future" entry. (PREFIX_OPCD_SEGS): Define. (prefix_opcd_indices): New array. (disassemble_init_powerpc): Initialize prefix_opcd_indices. (lookup_prefix): New function. (print_insn_powerpc): Handle 64-bit prefix instructions. * ppc-opc.c (PREFIX_OP, PREFIX_FORM, SUFFIX_MASK, PREFIX_MASK), (PMRR, POWERXX): Define. (prefix_opcodes): New instruction table. (prefix_num_opcodes): New constant. binutils/ * objdump.c (disassemble_bytes): Set WIDE_OUTPUT in flags. gas/ * config/tc-ppc.c (ppc_setup_opcodes): Handle prefix_opcodes. (struct insn_label_list): New. (insn_labels, free_insn_labels): New variables. (ppc_record_label, ppc_clear_labels, ppc_start_line_hook): New funcs. (ppc_frob_label, ppc_new_dot_label): Move functions earlier in file and call ppc_record_label. (md_assemble): Handle 64-bit prefix instructions. Align labels that are on the same line as a prefix instruction. * config/tc-ppc.h (tc_frob_label, ppc_frob_label): Move to later in the file. (md_start_line_hook): Define. (ppc_start_line_hook): Declare. * testsuite/gas/ppc/prefix-align.d, * testsuite/gas/ppc/prefix-align.s: New test. * testsuite/gas/ppc/ppc.exp: Run new test.
2019-05-11PowerPC objdump -MrawAlan Modra1-3/+5
* ppc-dis.c (print_insn_powerpc) Don't skip optional operands when -Mraw is in effect.
2019-05-09Update printing of optional operands during disassembly.Peter Bergner1-9/+8
opcodes/ * ppc-dis.c (skip_optional_operands): Change return type and returns. (print_insn_powerpc) <skip_optional>: Change type. Call skip_optional_operands if we have not skipped any operands. gas/ * testsuite/gas/ppc/476.d: Update expected output. * testsuite/gas/ppc/power6.d: Likewise.
2019-04-07print_insn_powerpc tidyAlan Modra1-26/+23
* ppc-dis.c (print_insn_powerpc): Use a tiny state machine op_separator to control printing of spaces, comma and parens rather than need_comma, need_paren and spaces vars.
2019-04-05PowerPC disassembler: Don't emit trailing spacesAlan Modra1-4/+11
When an instruction has operands, the PowerPC disassembler prints spaces after the opcode so as to line up operands. If the operands are all optional and all default value, then no operands are printed, leaving trailing spaces. This patch fixes that. opcodes/ * ppc-dis.c (print_insn_powerpc): Delay printing spaces after opcode until first operand is output. gas/ * testsuite/gas/ppc/476.d: Remove trailing spaces. * testsuite/gas/ppc/a2.d: Likewise. * testsuite/gas/ppc/booke.d: Likewise. * testsuite/gas/ppc/booke_xcoff.d: Likewise. * testsuite/gas/ppc/e500.d: Likewise. * testsuite/gas/ppc/e500mc.d: Likewise. * testsuite/gas/ppc/e6500.d: Likewise. * testsuite/gas/ppc/htm.d: Likewise. * testsuite/gas/ppc/power6.d: Likewise. * testsuite/gas/ppc/power8.d: Likewise. * testsuite/gas/ppc/power9.d: Likewise. * testsuite/gas/ppc/vle.d: Likewise. ld/ * testsuite/ld-powerpc/tlsexe32.d: Remove trailing spaces. * testsuite/ld-powerpc/tlsopt5.d: Likewise. * testsuite/ld-powerpc/tlsopt5_32.d: Likewise.
2019-03-28PR24390, Don't decode mtfsb field as a cr fieldAlan Modra1-1/+3
"mtfsb0 4*cr7+lt" doesn't make all that much sense, but unfortunately glibc uses just that instead of "mtfsb0 28" to clear the fpscr xe bit. So for backwards compatibility accept cr field expressions when assembling mtfsb operands, but disassemble to a plain number. PR 24390 include/ * opcode/ppc.h (PPC_OPERAND_CR_REG): Comment. opcodes/ * ppc-opc.c (BTF): Define. (powerpc_opcodes): Use for mtfsb*. * ppc-dis.c (print_insn_powerpc): Print fields with both PPC_OPERAND_CR_REG and PPC_OPERAND_CR_BIT as a plain number. gas/ * testsuite/gas/ppc/476.d: Update mtfsb*. * testsuite/gas/ppc/a2.d: Likewise.
2019-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2018-12-28PR24028, PPC_INT_FMTAlan Modra1-10/+10
PPC_INT_FMT is redundant now that bfd.h pulls in inttypes.h if available. Apparently MacOS Mojave defines int64_t as long long even though long is also 64 bits, which confuses the logic selecting PPC_INT_FMT (and BFD_PRI64 too). Hopefully inttypes.h is available on Mojave. PR 24028 include/ * opcode/ppc.h (PPC_INT_FMT): Delete. opcodes/ * ppc-dis.c (print_insn_powerpc): Replace PPC_INT_FMT uses with PRId64/PRIx64.
2018-08-21Use operand->extract to provide defaults for optional PowerPC operandsAlan Modra1-6/+13
Most optional operands to powerpc instructions use a default value of zero, but there are a few exceptions. Those have been handled by PPC_OPERAND_OPTIONAL_VALUE and an entry in the powerpc_operands table for the default value, smuggled in the shift field. This patch changes that to using the operand extract function to provide non-zero defaults. I've also moved the code determining whether optional operands are provided or omitted, to the point the first optional operand is seen, and allowed for the possibility of optional base register operands in a future patch. The patch does change the error you get on invalid assembly like ld 3,4 You'll now see "missing operand" rather than "syntax error; end of line, expected `('". gas/ * config/tc-ppc.c (md_assemble): Delay counting of optional operands until one is encountered. Allow for the possibility of optional base regs, ie. PPC_OPERAND_PARENS. Call ppc_optional_operand_value with extra args. include/ * opcode/ppc.h (struct powerpc_operand): Correct "insert" comment. Mention use of "extract" function to provide default value. (PPC_OPERAND_OPTIONAL_VALUE): Delete. (ppc_optional_operand_value): Rewrite to use extract function. opcodes/ * ppc-dis.c (operand_value_powerpc): Init "invalid". (skip_optional_operands): Count optional operands, and update ppc_optional_operand_value call. * ppc-opc.c (extract_dxdn): Remove ATTRIBUTE_UNUSED from used arg. (extract_vlensi): Likewise. (extract_fxm): Return default value for missing optional operand. (extract_ls, extract_raq, extract_tbr): Likewise. (insert_sxl, extract_sxl): New functions. (insert_esync, extract_esync): Remove Power9 handling and simplify. (powerpc_operands <FXM4, TBR>): Delete PPC_OPERAND_OPTIONAL_VALUE flag and extra entry. (powerpc_operands <SXL>): Likewise, and use insert_sxl and extract_sxl.
2018-07-26PowerPC Improve support for Gekko & BroadwayAlex Chadwick1-0/+7
This is a relatively straightforward patch to improve support for the IBM Gekko and IBM Broadway processors. Broadway is functionally equivalent to the IBM 750CL, while Gekko's functionality is a subset of theirs. The patch simplifies this reality and adds -mgekko and -mbroadway as aliases for -m750cl. I didn't feel it was worth wasting a PPC_OPCODE_* bit to differentiate Gekko. The patch adds a number of simplified mnemonics for special purpose register access. Notably, Broadway adds 4 additional IBAT and DBAT registers but these are not assigned sequential SPR numbers. gas/ * config/tc-ppc.c (md_show_usage): Add -mgekko and -mbroadway. * doc/as.texi (Target PowerPC options): Add -mgekko and -mbroadway. * doc/c-ppc.texi (PowerPC-Opts): Likewise. * testsuite/gas/ppc/broadway.d, * testsuite/gas/ppc/broadway.s: New test for broadway. * testsuite/gas/ppc/ppc.exp: Run new test. include/ * opcode/ppc.h (PPC_OPCODE_750): Adjust comment. opcodes/ * ppc-dis.c (ppc_opts): Add -mgekko and -mbroadway. (powerpc_init_dialect): Handle bfd_mach_ppc_750. * ppc-opc.c (insert_sprbat, extract_sprbat): New functions to support disjointed BAT. (powerpc_operands): Allow extra bit in SPRBAT_MASK. Add SPRGQR. (XSPRGQR_MASK, GEKKO, BROADWAY): Define. (powerpc_opcodes): Add 750cl extended mnemonics for spr access.
2018-07-02GDB PR tdep/8282: MIPS: Wire in `set disassembler-options'Maciej W. Rozycki1-6/+12
Implement MIPS target support for passing options to the disassembler, complementing commit 65b48a81404c ("GDB: Add support for the new set/show disassembler-options commands."). This includes options that expect an argument, so adjust the generic code and data structures used so as to handle such options. So as to give backends syntax flexibility no specific delimiter has been defined to separate options from their respective arguments, so it has to be included as the last character of the option name. Completion code however has not been adjusted and consequently option arguments cannot be completed at this time. Also the MIPS target has non-empty defaults for the options, so that ABI names for the general-purpose registers respect our `set mips abi ...' setting rather than always being determined from the ELF headers of the binary file selected. Handle these defaults as implicit options, never shown to the user and always prepended to the user-specified options, so that the latters can override the defaults. The resulting output for the MIPS target is as follows: (gdb) show disassembler-options The current disassembler options are '' The following disassembler options are supported for use with the 'set disassembler-options <option>[,<option>...]' command: no-aliases Use canonical instruction forms. msa Recognize MSA instructions. virt Recognize the virtualization ASE instructions. xpa Recognize the eXtended Physical Address (XPA) ASE instructions. ginv Recognize the Global INValidate (GINV) ASE instructions. gpr-names=ABI Print GPR names according to specified ABI. Default: based on binary being disassembled. fpr-names=ABI Print FPR names according to specified ABI. Default: numeric. cp0-names=ARCH Print CP0 register names according to specified architecture. Default: based on binary being disassembled. hwr-names=ARCH Print HWR names according to specified architecture. Default: based on binary being disassembled. reg-names=ABI Print GPR and FPR names according to specified ABI. reg-names=ARCH Print CP0 register and HWR names according to specified architecture. For the options above, the following values are supported for "ABI": numeric 32 n32 64 For the options above, the following values are supported for "ARCH": numeric r3000 r3900 r4000 r4010 vr4100 vr4111 vr4120 r4300 r4400 r4600 r4650 r5000 vr5400 vr5500 r5900 r6000 rm7000 rm9000 r8000 r10000 r12000 r14000 r16000 mips5 mips32 mips32r2 mips32r3 mips32r5 mips32r6 mips64 mips64r2 mips64r3 mips64r5 mips64r6 interaptiv-mr2 sb1 loongson2e loongson2f loongson3a octeon octeon+ octeon2 octeon3 xlr xlp (gdb) which corresponds to what `objdump --help' used to print for the MIPS target, with minor formatting changes, most notably option argument lists being wrapped, but also the amount of white space separating options from the respective descriptions. The relevant part the new code is now also used by `objdump --help', which means these formatting changes apply to both outputs, except for argument list wrapping, which is GDB-specific. This also adds a separating new line between the heading and option lists where descriptions are provided, hence: (gdb) set architecture s390:31-bit (gdb) show disassembler-options The current disassembler options are '' The following disassembler options are supported for use with the 'set disassembler-options <option>[,<option>...]' command: esa Disassemble in ESA architecture mode zarch Disassemble in z/Architecture mode insnlength Print unknown instructions according to length from first two bits (gdb) but: (gdb) set architecture powerpc:common (gdb) show disassembler-options The current disassembler options are '' The following disassembler options are supported for use with the 'set disassembler-options <option>[,<option>...]' command: 403, 405, 440, 464, 476, 601, 603, 604, 620, 7400, 7410, 7450, 7455, 750cl, 821, 850, 860, a2, altivec, any, booke, booke32, cell, com, e200z4, e300, e500, e500mc, e500mc64, e5500, e6500, e500x2, efs, efs2, power4, power5, power6, power7, power8, power9, ppc, ppc32, 32, ppc64, 64, ppc64bridge, ppcps, pwr, pwr2, pwr4, pwr5, pwr5x, pwr6, pwr7, pwr8, pwr9, pwrx, raw, spe, spe2, titan, vle, vsx (gdb) Existing affected target backends have been adjusted accordingly. This has been verified manually with: (gdb) set architecture arm (gdb) set architecture powerpc:common (gdb) set architecture s390:31-bit to cause no issues with the `show disassembler-options' and `set disassembler-options' commands. A test case for the MIPS target has also been provided, covering the default settings with ABI overrides as well as disassembler option overrides. 2018-07-02 Maciej W. Rozycki <macro@mips.com> Simon Marchi <simon.marchi@polymtl.ca> include/ PR tdep/8282 * dis-asm.h (disasm_option_arg_t): New typedef. (disasm_options_and_args_t): Likewise. (disasm_options_t): Add `arg' member, document members. (disassembler_options_mips): New prototype. (disassembler_options_arm, disassembler_options_powerpc) (disassembler_options_s390): Update prototypes. opcodes/ PR tdep/8282 * mips-dis.c (mips_option_arg_t): New enumeration. (mips_options): New variable. (disassembler_options_mips): New function. (print_mips_disassembler_options): Reimplement in terms of `disassembler_options_mips'. * arm-dis.c (disassembler_options_arm): Adapt to using the `disasm_options_and_args_t' structure. * ppc-dis.c (disassembler_options_powerpc): Likewise. * s390-dis.c (disassembler_options_s390): Likewise. gdb/ PR tdep/8282 * disasm.h (gdb_disassembler): Add `m_disassembler_options_holder'. member * disasm.c (get_all_disassembler_options): New function. (gdb_disassembler::gdb_disassembler): Use it. (gdb_buffered_insn_length_init_dis): Likewise. (gdb_buffered_insn_length): Adjust accordingly. (set_disassembler_options): Handle options with arguments. (show_disassembler_options_sfunc): Likewise. Add a leading new line if showing options with descriptions. (disassembler_options_completer): Adapt to using the `disasm_options_and_args_t' structure. * mips-tdep.c (mips_disassembler_options): New variable. (mips_disassembler_options_o32): Likewise. (mips_disassembler_options_n32): Likewise. (mips_disassembler_options_n64): Likewise. (gdb_print_insn_mips): Don't set `disassembler_options'. (gdb_print_insn_mips_n32, gdb_print_insn_mips_n64): Remove functions. (mips_gdbarch_init): Always set `gdbarch_print_insn' to `gdb_print_insn_mips'. Set `gdbarch_disassembler_options', `gdbarch_disassembler_options_implicit' and `gdbarch_valid_disassembler_options'. * arm-tdep.c (_initialize_arm_tdep): Adapt to using the `disasm_options_and_args_t' structure. * gdbarch.sh (disassembler_options_implicit): New `gdbarch' method. (valid_disassembler_options): Switch from `disasm_options_t' to the `disasm_options_and_args_t' structure. * NEWS: Document `set disassembler-options' support for the MIPS target. * gdbarch.h: Regenerate. * gdbarch.c: Regenerate. gdb/doc/ PR tdep/8282 * gdb.texinfo (Source and Machine Code): Document `set disassembler-options' support for the MIPS target. gdb/testsuite/ PR tdep/8282 * gdb.arch/mips-disassembler-options.exp: New test. * gdb.arch/mips-disassembler-options.s: New test source.
2018-05-21Remove fake operand handling for extended mnemonics.Peter Bergner1-6/+0
opcodes/ * ppc-opc.c (insert_bat, extract_bat, insert_bba, extract_bba, insert_rbs, extract_rbs, insert_xb6s, extract_xb6s): Delete functions. (insert_bab, extract_bab, insert_btab, extract_btab, insert_rsb, extract_rsb, insert_xab6, extract_xab6): New functions. (BAT, BBA VBA RBS XB6S): Delete macros. (BTAB, BAB, VAB, RAB, RSB, XAB6): New macros. (BB, BD, RBX, XC6): Update for new macros. (powerpc_opcodes) <evmr, evnot, vmr, vnot, crnot, crclr, crset, crmove, not, not., mr, mr., xxspltd, xxswapd, xvmovsp, xvmovdp, e_crnot, e_crclr, e_crset, e_crmove>: Likewise. * ppc-dis.c (print_insn_powerpc): Delete handling of fake operands. include/ * opcode/ppc.h (PPC_OPERAND_FAKE): Delete macro. gas/ * config/tc-ppc.c (md_assemble): Delete handling of fake operands. * testsuite/gas/ppc/common.s (crmove, cror, or., or, nor., nor): Add test of extended mnemonics. * testsuite/gas/ppc/common.d: Likewise. Don't match instruction offset. * testsuite/gas/ppc/spe.s (evor, evnor): Add test of extended mnemonics. * testsuite/gas/ppc/spe.d: Likewise. Don't match instruction offset.
2018-05-08Correct powerpc spe opcode lookupAlan Modra1-6/+6
Defining SPE2_OPCD_SEGS as 13 discounts the possibility that we'd ever look up spe2_opcd_indices[14..16], which I think is possible. Extend that array to size 16+1, using the macros we use to index the array. Similarly use the index macros for PPC_OPCD_SEGS and VLE_OPCD_SEGS. * ppc-dis.c (PPC_OPCD_SEGS): Define using PPC_OP. (VLE_OPCD_SEGS, SPE2_OPCD_SEGS): Similarly, using macros used to partition opcode space for index lookup.
2018-05-07Simplify VLE handling in print_insn_powerpc().Peter Bergner1-35/+20
opcodes/ * ppc-dis.c (print_insn_powerpc) <insn_is_short>: Replace this... <insn_length>: ...with this. Update usage. Remove duplicate call to *info->memory_error_func.
2018-05-07Cleanup ppc code dealing with opcode dumps.Peter Bergner1-41/+25
include/ * opcode/ppc.h (powerpc_num_opcodes): Change type to unsigned. (vle_num_opcodes): Likewise. (spe2_num_opcodes): Likewise. opcodes/ * ppc-opc.c (powerpc_num_opcodes): Likewise. (vle_num_opcodes): Likewise. (spe2_num_opcodes): Likewise. * ppc-dis.c (disassemble_init_powerpc) <powerpc_opcd_indices>: Rewrite initialization loop. (disassemble_init_powerpc) <vle_opcd_indices>: Likewise. (disassemble_init_powerpc) <spe2_opcd_indices>: Likewise. Initialize only once. gas/ * config/tc-ppc.c (ppc_setup_opcodes) <powerpc_opcodes>: Rewrite code to dump the entire opcode table. (ppc_setup_opcodes) <spe2_opcodes>: Likewise. (ppc_setup_opcodes) <vle_opcodes>: Likewise. Fix calculation of opcode index.
2018-03-07XCOFF disassemblerAlan Modra1-11/+5
xcoff (32-bit) objdump accepted but ignored -M options unless -mpowerpc was also given. This patch fixes that, leaving the default as -Mpwr for xcoff. I've also enabled more tests for xcoff targets. binutils/ * configure.ac: Add objdump_private_desc_xcoff for rs6000. * configure: Regenerate. gas/ * testsuite/gas/ppc/aix.exp: Run for rs6000 too. * testsuite/gas/ppc/ppc.exp: Run more tests for non-ELF targets. * testsuite/gas/ppc/machine.d: Don't run for PE targets. opcodes/ * disassemble.c (disassembler): Use bfd_arch_powerpc entry for bfd_arch_rs6000. * disassemble.h (print_insn_rs6000): Delete. * ppc-dis.c (powerpc_init_dialect): Handle rs6000. (disassemble_init_powerpc): Call powerpc_init_dialect for rs6000. (print_insn_rs6000): Delete.
2018-03-03opcodes error messagesAlan Modra1-1/+2
Another patch aimed at making binutils comply with the GNU coding standard. The generated files require https://sourceware.org/ml/cgen/2018-q1/msg00004.html cpu/ * frv.opc: Include opintl.h. (add_next_to_vliw): Use opcodes_error_handler to print error. Standardize error message. (fr500_check_insn_major_constraints, frv_vliw_add_insn): Likewise. opcodes/ * sysdep.h (opcodes_error_handler): Define. (_bfd_error_handler): Declare. * Makefile.am: Remove stray #. * opc2c.c (main): Remove bogus -l arg handling. Print "DO NOT EDIT" comment. * aarch64-dis.c, * arc-dis.c, * arm-dis.c, * avr-dis.c, * d30v-dis.c, * h8300-dis.c, * mmix-dis.c, * ppc-dis.c, * riscv-dis.c, * s390-dis.c, * sparc-dis.c, * v850-dis.c: Use opcodes_error_handler to print errors. Standardize error messages. * msp430-decode.opc, * nios2-dis.c, * rl78-decode.opc: Likewise, and include opintl.h. * nds32-asm.c: Likewise, and include sysdep.h and opintl.h. * i386-gen.c: Standardize error messages. * msp430-decode.c, * rl78-decode.c, rx-decode.c: Regenerate. * Makefile.in: Regenerate. * epiphany-asm.c, * epiphany-desc.c, * epiphany-dis.c, * epiphany-ibld.c, * fr30-asm.c, * fr30-desc.c, * fr30-dis.c, * fr30-ibld.c, * frv-asm.c, * frv-desc.c, * frv-dis.c, * frv-ibld.c, * frv-opc.c, * ip2k-asm.c, * ip2k-desc.c, * ip2k-dis.c, * ip2k-ibld.c, * iq2000-asm.c, * iq2000-desc.c, * iq2000-dis.c, * iq2000-ibld.c, * lm32-asm.c, * lm32-desc.c, * lm32-dis.c, * lm32-ibld.c, * m32c-asm.c, * m32c-desc.c, * m32c-dis.c, * m32c-ibld.c, * m32r-asm.c, * m32r-desc.c, * m32r-dis.c, * m32r-ibld.c, * mep-asm.c, * mep-desc.c, * mep-dis.c, * mep-ibld.c, * mt-asm.c, * mt-desc.c, * mt-dis.c, * mt-ibld.c, * or1k-asm.c, * or1k-desc.c, * or1k-dis.c, * or1k-ibld.c, * xc16x-asm.c, * xc16x-desc.c, * xc16x-dis.c, * xc16x-ibld.c, * xstormy16-asm.c, * xstormy16-desc.c, * xstormy16-dis.c, * xstormy16-ibld.c: Regenerate.
2018-01-03Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2017-12-01Use consistent types for holding instructions, instruction masks, etc.Peter Bergner1-47/+43
include/ * opcode/ppc.h (PPC_INT_FMT): Define. (struct powerpc_opcode) <opcode>: Update type. (struct powerpc_opcode) <mask>: Likewise. (struct powerpc_opcode) <bitm>: Likewise. (struct powerpc_opcode) <insert>: Likewise. (struct powerpc_opcode) <extract>: Likewise. (ppc_optional_operand_value): Likewise. gas/ * config/tc-ppc.c (last_insn): Update type. (insn_validate) <omask, mask>: Likewise. (ppc_setup_opcodes) <mask, right_bit>: Likewise. <PRINT_OPCODE_TABLE>: Update types and printf format specifiers. (ppc_insert_operand): Update return and argument types and remove unneeded type casts. <min, max, right, tmp>: Update type. (md_assemble): Remove unneeded type casts. <insn, val, tmp_insn>: Update type. opcodes/ * opcodes/ppc-dis.c (disassemble_init_powerpc): Fix white space. (operand_value_powerpc): Update return and argument type. <value, top>: Update type. (skip_optional_operands): Update argument type. (lookup_powerpc): Likewise. (lookup_vle): Likewise. <table_opcd, table_mask, insn2>: Update type. (lookup_spe2): Update argument type. <table_opcd, table_mask, insn2>: Update type. (print_insn_powerpc) <insn, value>: Update type. Use PPC_INT_FMT for printing instructions and operands. * opcodes/ppc-opc.c (insert_arx, extract_arx, insert_ary, extract_ary, insert_rx, extract_rx, insert_ry, extract_ry, insert_bat, extract_bat, insert_bba, extract_bba, insert_bdm, extract_bdm, insert_bdp, extract_bdp, valid_bo_pre_v2, valid_bo_post_v2, valid_bo, insert_bo, extract_bo, insert_boe, extract_boe, insert_dcmxs, extract_dcmxs, insert_dxd, extract_dxd, insert_dxdn, extract_dxdn, insert_fxm, extract_fxm, insert_li20, extract_li20, insert_ls, extract_ls, insert_esync, extract_esync, insert_mbe, extract_mbe, insert_mb6, extract_mb6, extract_nb, insert_nbi, insert_nsi, extract_nsi, insert_ral, extract_ral, insert_ram, extract_ram, insert_raq, extract_raq, insert_ras, extract_ras, insert_rbs, extract_rbs, insert_rbx, extract_rbx, insert_sci8, extract_sci8, insert_sci8n, extract_sci8n, insert_sd4h, extract_sd4h, insert_sd4w, extract_sd4w, insert_oimm, extract_oimm, insert_sh6, extract_sh6, insert_spr, extract_spr, insert_sprg, extract_sprg, insert_tbr, extract_tbr, insert_xt6, extract_xt6, insert_xtq6, extract_xtq6, insert_xa6, extract_xa6, insert_xb6, extract_xb6, insert_xb6s, extract_xb6s, insert_xc6, extract_xc6, insert_dm, extract_dm, insert_vlesi, extract_vlesi, insert_vlensi, extract_vlensi, insert_vleui, extract_vleui, insert_vleil, extract_vleil, insert_evuimm1_ex0, extract_evuimm1_ex0, insert_evuimm2_ex0, extract_evuimm2_ex0, insert_evuimm4_ex0, extract_evuimm4_ex0, insert_evuimm8_ex0, extract_evuimm8_ex0, insert_evuimm_lt8, extract_evuimm_lt8, insert_evuimm_lt16, extract_evuimm_lt16, insert_rD_rS_even, extract_rD_rS_even, insert_off_lsp, extract_off_lsp, insert_off_spe2, extract_off_spe2, insert_Ddd, extract_Ddd): Update types. (OP, OPTO, OPL, OPVUP, OPVUPRT, A, AFRALFRC_MASK, B, BD8, BD8IO, BD15, BD24, BBO, Y_MASK , AT1_MASK, AT2_MASK, BBOCB, C_LK, C, CTX, UCTX, DX, EVSEL, IA16, I16A, I16L, IM7, LI20, MME, MD, MDS, SC, SC_MASK, SCI8, SCI8BF, SD4, SE_IM5, SE_R, SE_RR, VX, VX_LSP, VX_RA_CONST, VX_RB_CONST, VX_SPE_CRFD, VX_SPE2_CLR, VX_SPE2_SPLATB, VX_SPE2_OCTET, VX_SPE2_DDHH, VX_SPE2_HH, VX_SPE2_EVMAR, VX_SPE2_EVMAR_MASK, VXA, VXR, VXASH, X, EX, XX2, XX3, XX3RC, XX4, Z, XWRA_MASK, XLRT_MASK, XRLARB_MASK, XLRAND_MASK, XRTLRA_MASK, XRTLRARB_MASK, XRTARARB_MASK, XRTBFRARB_MASK, XOPL, XOPL2, XRCL, XRT, XRTRA, XCMP_MASK, XCMPL_MASK, XTO, XTLB, XSYNC, XEH_MASK, XDSS, XFL, XISEL, XL, XLO, XLYLK, XLOCB, XMBAR, XO, XOPS, XS, XFXM, XSPR, XUC, XW, APU): Update types in casts.
2017-08-24[PowerPC VLE] Add SPE2 and EFS2 instructions supportAlexander Fedotov1-2/+81
include/ * opcode/ppc.h: (spe2_opcodes, spe2_num_opcodes): New. (PPC_OPCODE_SPE2): New define. (PPC_OPCODE_EFS2): Likewise. (SPE2_XOP): Likewise. (SPE2_XOP_TO_SEG): Likewise. opcodes/ * ppc-dis.c (ppc_mopt): Add PPC_OPCODE_SPE2 and PPC_OPCODE_EFS2 flag to "e200z4" entry. New entries efs2 and spe2. Add PPC_OPCODE_SPE2 and PPC_OPCODE_EFS2 flag to "vle" entry. (SPE2_OPCD_SEGS): New macro. (spe2_opcd_indices): New. (disassemble_init_powerpc): Handle SPE2 opcodes. (lookup_spe2): New function. (print_insn_powerpc): call lookup_spe2. * ppc-opc.c (insert_evuimm1_ex0): New function. (extract_evuimm1_ex0): Likewise. (insert_evuimm_lt8): Likewise. (extract_evuimm_lt8): Likewise. (insert_off_spe2): Likewise. (extract_off_spe2): Likewise. (insert_Ddd): Likewise. (extract_Ddd): Likewise. (DD): New operand. (EVUIMM_LT8): Likewise. (EVUIMM_LT16): Adjust. (MMMM): New operand. (EVUIMM_1): Likewise. (EVUIMM_1_EX0): Likewise. (EVUIMM_2): Adjust. (NNN): New operand. (VX_OFF_SPE2): Likewise. (BBB): Likewise. (DDD): Likewise. (VX_MASK_DDD): New mask. (HH): New operand. (VX_RA_CONST): New macro. (VX_RA_CONST_MASK): Likewise. (VX_RB_CONST): Likewise. (VX_RB_CONST_MASK): Likewise. (VX_OFF_SPE2_MASK): Likewise. (VX_SPE_CRFD): Likewise. (VX_SPE_CRFD_MASK VX): Likewise. (VX_SPE2_CLR): Likewise. (VX_SPE2_CLR_MASK): Likewise. (VX_SPE2_SPLATB): Likewise. (VX_SPE2_SPLATB_MASK): Likewise. (VX_SPE2_OCTET): Likewise. (VX_SPE2_OCTET_MASK): Likewise. (VX_SPE2_DDHH): Likewise. (VX_SPE2_DDHH_MASK): Likewise. (VX_SPE2_HH): Likewise. (VX_SPE2_HH_MASK): Likewise. (VX_SPE2_EVMAR): Likewise. (VX_SPE2_EVMAR_MASK): Likewise. (PPCSPE2): Likewise. (PPCEFS2): Likewise. (vle_opcodes): Add EFS2 and some missing SPE opcodes. (powerpc_macros): Map old SPE instructions have new names with the same opcodes. Add SPE2 instructions which just are mapped to SPE2. (spe2_opcodes): Add SPE2 opcodes. gas/ * config/tc-ppc.c: (md_parse_option): Add mspe2 switch. (md_show_usage): Document -mspe2. (ppc_setup_opcodes): Handle spe2_opcodes. * doc/as.texinfo: Document -mspe2. * doc/c-ppc.texi: Likewise. * testsuite/gas/ppc/efs.d: New file. * testsuite/gas/ppc/efs.s: Likewise. * testsuite/gas/ppc/efs2.d: Likewise. * testsuite/gas/ppc/efs2.s: Likewise. * testsuite/gas/ppc/ppc.exp: Run new tests. * testsuite/gas/ppc/spe.d: New file. * testsuite/gas/ppc/spe.s: Likewise. * testsuite/gas/ppc/spe2-checks.d: Likewise. * testsuite/gas/ppc/spe2-checks.l: Likewise. * testsuite/gas/ppc/spe2-checks.s: Likewise. * testsuite/gas/ppc/spe2.d: Likewise. * testsuite/gas/ppc/spe2.s: Likewise. * testsuite/gas/ppc/spe_ambiguous.d: Likewise. * testsuite/gas/ppc/spe_ambiguous.s: Likewise.
2017-08-21[PowerPC VLE] Add LSP (Lightweight Signal Processing) instruction supportAlexander Fedotov1-1/+1
include/ * opcode/ppc.h (PPC_OPCODE_LSP): New define. opcodes/ * ppc-opc.c (insert_evuimm2_ex0): New function. (extract_evuimm2_ex0): Likewise. (insert_evuimm4_ex0): Likewise. (extract_evuimm4_ex0): Likewise. (insert_evuimm8_ex0): Likewise. (extract_evuimm8_ex0): Likewise. (insert_evuimm_lt16): Likewise. (extract_evuimm_lt16): Likewise. (insert_rD_rS_even): Likewise. (extract_rD_rS_even): Likewise. (insert_off_lsp): Likewise. (extract_off_lsp): Likewise. (RD_EVEN): New operand. (RS_EVEN): Likewise. (RSQ): Adjust. (EVUIMM_LT16): New operand. (HTM_SI): Adjust. (EVUIMM_2_EX0): New operand. (EVUIMM_4): Adjust. (EVUIMM_4_EX0): New operand. (EVUIMM_8): Adjust. (EVUIMM_8_EX0): New operand. (WS): Adjust. (VX_OFF): New operand. (VX_LSP): New macro. (VX_LSP_MASK): Likewise. (VX_LSP_OFF_MASK): Likewise. (PPC_OPCODE_LSP): Likewise. (vle_opcodes): Add LSP opcodes. * ppc-dis.c (ppc_mopt): Add PPC_OPCODE_LSP flag to "vle" entry. gas/ * testsuite/gas/ppc/lsp-checks.d, * testsuite/gas/ppc/lsp-checks.l, * testsuite/gas/ppc/lsp-checks.s: New test. * testsuite/gas/ppc/lsp.d, * testsuite/gas/ppc/lsp.s: New test. * testsuite/gas/ppc/ppc.exp: Run new tests.
2017-05-24Move print_insn_XXX to an opcodes internal headerYao Qi1-1/+1
With the changes done in previous patches, print_insn_XXX functions don't have to be external visible out of opcodes, because both gdb and objdump select disassemblers through a single interface. This patch moves these print_insn_XXX declarations from include/dis-asm.h to opcodes/disassemble.h, which is a new header added by this patch. include: 2017-05-24 Yao Qi <yao.qi@linaro.org> * dis-asm.h: Move some function declarations to opcodes/disassemble.h. opcodes: 2017-05-24 Yao Qi <yao.qi@linaro.org> * alpha-dis.c: Include disassemble.h, don't include dis-asm.h. * avr-dis.c, bfin-dis.c, cr16-dis.c: Likewise. * crx-dis.c, d10v-dis.c, d30v-dis.c: Likewise. * disassemble.c, dlx-dis.c, epiphany-dis.c: Likewise. * fr30-dis.c, ft32-dis.c, h8300-dis.c, h8500-dis.c: Likewise. * hppa-dis.c, i370-dis.c, i386-dis.c: Likewise. * i860-dis.c, i960-dis.c, ip2k-dis.c: Likewise. * iq2000-dis.c, lm32-dis.c, m10200-dis.c: Likewise. * m10300-dis.c, m32r-dis.c, m68hc11-dis.c: Likewise. * m68k-dis.c, m88k-dis.c, mcore-dis.c: Likewise. * metag-dis.c, microblaze-dis.c, mmix-dis.c: Likewise. * moxie-dis.c, msp430-dis.c, mt-dis.c: * nds32-dis.c, nios2-dis.c, ns32k-dis.c: Likewise. * or1k-dis.c, pdp11-dis.c, pj-dis.c: Likewise. * ppc-dis.c, pru-dis.c, riscv-dis.c: Likewise. * rl78-dis.c, s390-dis.c, score-dis.c: Likewise. * sh-dis.c, sh64-dis.c, tic30-dis.c: Likewise. * tic4x-dis.c, tic54x-dis.c, tic6x-dis.c: Likewise. * tic80-dis.c, tilegx-dis.c, tilepro-dis.c: Likewise. * v850-dis.c, vax-dis.c, visium-dis.c: Likewise. * w65-dis.c, wasm32-dis.c, xc16x-dis.c: Likewise. * xgate-dis.c, xstormy16-dis.c, xtensa-dis.c: Likewise. * z80-dis.c, z8k-dis.c: Likewise. * disassemble.h: New file.
2017-04-11Reorder PPC_OPCODE_* and set PPC_OPCODE_TMR for e6500Alan Modra1-3/+2
PPC_OPCODE_* renumbered to fill the gaps left by previous patches, and reordered chronologically just because. I kept PPC_OPCODE_TMR because presumably it might be used in future APUinfo for e6500. include/ * opcode/ppc.h (PPC_OPCODE_*): Renumber and order chronologically. (PPC_OPCODE_SPE): Comment on this and other bits used for APUinfo. opcodes/ * ppc-dis.c (ppc_opts): Formatting. Set PPC_OPCODE_TMR for e6500. * ppc-opc.c (powerpc_opcodes <mftmr, mttmr>): Remove now unnecessary E6500.
2017-04-11Bye bye PPC_OPCODE_HTM and -mhtmAlan Modra1-6/+4
The -mhtm option is fairly useless too. include/ * opcode/ppc.h (PPC_OPCODE_HTM): Delete. gas/ * config/tc-ppc.c (md_show_usage): Delete mention of -mhtm. * testsuite/gas/ppc/htm.d: Pass -mpower8 and -Mpower8. opcodes/ * ppc-dis.c (ppc_opts): Remove PPC_OPCODE_HTM and "htm". * ppc-opc.c (PPCHTM): Define as PPC_OPCODE_POWER8.
2017-04-11Bye Bye PPC_OPCODE_VSX3Alan Modra1-4/+2
This bit is also useless as it can be replaced with PPC_OPCODE_POWER9. Defining the VSX2 and VSX3 selection based on cpu bits also lets the assembler/disassembler distinguish between the power7 VSX opcodes and the power8 ones. Note that this change means -mvsx now reverts back to just adding the power7 VSX insns. include/ * opcode/ppc.h (PPC_OPCODE_VSX3): Delete. opcodes/ * ppc-dis.c (ppc_opts): Remove PPC_OPCODE_VSX3. * ppc-opc.c (PPCVSX2): Define as PPC_OPCODE_POWER8. (PPCVSX3): Define as PPC_OPCODE_POWER9.
2017-04-11Bye bye PPC_OPCODE_ALTIVEC2Alan Modra1-5/+5
This bit is worse than useless. Using it prevents the assembler and disassembler distinguishing between opcodes added for power8 and those added for power9. include/ * opcode/ppc.h (PPC_OPCODE_ALTIVEC2): Delete. opcodes/ * ppc-dis.c (ppc_opts): Remove PPC_OPCODE_ALTIVEC2. * ppc-opc.c (PPCVEC2): Define as PPC_OPCODE_POWER8|PPC_OPCODE_E6500. (PPCVEC3): Define as PPC_OPCODE_POWER9.
2017-04-10Tidy ppc476 opcodesAlan Modra1-2/+2
PPC_OPCODE_440 being set for ppc476 meant that many opcodes needed to be deprecated for ppc476. There are far fewer to add specially for ppc476 if PPC_OPCODE_440 is not set for ppc476. * ppc-dis.c (ppc_opts <476>): Remove PPC_OPCODE_440. * ppc-opc.c (MULHW): Add PPC_OPCODE_476. (powerpc_opcodes): Adjust PPC440, PPC464 and PPC476 insns to suit removal of PPC_OPCODE_440 from ppc476 cpu selection bits.
2017-04-05-Wwrite-strings: Constify struct disassemble_info's disassembler_options fieldPedro Alves1-1/+1
The memory disassemble_info::disassembler_options points to is always owned by the client. I.e., that field is an non-owning, observing pointer. Thus const makes sense. Are the include/ and opcodes/ bits OK? Tested on x86_64 Fedora 23, built with --enable-targets=all. include/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * dis-asm.h (disassemble_info) <disassembler_options>: Now a "const char *". (next_disassembler_option): Constify. opcodes/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * arc-dis.c (parse_option, parse_disassembler_options): Constify. * arm-dis.c (parse_arm_disassembler_options): Constify. * ppc-dis.c (powerpc_init_dialect): Constify local. * vax-dis.c (parse_disassembler_options): Constify. gdb/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * arm-tdep.c (show_disassembly_style_sfunc): Constify local. * disasm.c (set_disassembler_options): Constify local. * i386-tdep.c (i386_print_insn): Remove cast and FIXME comment.
2017-03-29PowerPC -Mraw disassemblyAlan Modra1-10/+17
This adds -Mraw for PowerPC objdump, a disassembler option to display the underlying machine instruction rather than aliases. For example, "rlwinm" always rather than "rotlwi" when the instruction is performing a simple rotate. binutils/ * doc/binutils.texi (objdump): Document PowerPC -M options. gas/ * config/tc-ppc.c (md_parse_option): Reject -mraw. include/ * opcode/ppc.h (PPC_OPCODE_RAW): Define. (PPC_OPCODE_*): Make them all unsigned long long constants. opcodes/ * ppc-dis.c (ppc_opts): Set PPC_OPCODE_PPC for "any" flags. Add "raw" option. (lookup_powerpc): Don't special case -1 dialect. Handle PPC_OPCODE_RAW. (print_insn_powerpc): Mask out PPC_OPCODE_ANY on first lookup_powerpc call, pass it on second.
2017-03-27PR21303, objdump doesn't show e200z4 insnsAlan Modra1-2/+13
PR 21303 opcodes/ * ppc-dis.c (struct ppc_mopt): Comment. (ppc_opts <e200z4>): Move PPC_OPCODE_VLE from .sticky to .cpu. gas/ * testsuite/gas/ppc/pr21303.d, * testsuite/gas/ppc/pr21303.s: New test * testsuite/gas/ppc/ppc.exp: Run it.
2017-03-08Update -maltivec and -mvsx options to only enable their oldest instructions.Peter Bergner1-2/+2
Currently, the -maltivec and -mvsx GAS options enable *all* of the altivec and vsx instructions respecitively that have ever been added. This is in constract to GCC's -maltivec and -mvsx options, which only enable the oldest (ie, first) set of altivec and vsx instructions. This patch changes GAS to mimic GCC's behaviour with respect to -maltivec and -mvsx and it solves a problem with trying to assemble the lxvx instruction which is different between POWER8 and POWER9. opcodes/ * ppc-dis.c (ppc_opts) <altivec>: Do not use PPC_OPCODE_ALTIVEC2; <vsx>: Do not use PPC_OPCODE_VSX3; gas/ * testsuite/gas/ppc/altivec2.d (as): Use the -mpower8 option. (objdump): Use the -Mpower8 option.
2017-02-28GDB: Add support for the new set/show disassembler-options commands.Peter Bergner1-21/+38
This commit adds support to GDB so that it can modify the disassembler-options value that is passed to the disassembler, similar to objdump's -M option. Currently, the only supported targets are ARM, PowerPC and S/390, but adding support for a new target(s) is not difficult. include/ * dis-asm.h (disasm_options_t): New typedef. (parse_arm_disassembler_option): Remove prototype. (set_arm_regname_option): Likewise. (get_arm_regnames): Likewise. (get_arm_regname_num_options): Likewise. (disassemble_init_s390): New prototype. (disassembler_options_powerpc): Likewise. (disassembler_options_arm): Likewise. (disassembler_options_s390): Likewise. (remove_whitespace_and_extra_commas): Likewise. (disassembler_options_cmp): Likewise. (next_disassembler_option): New inline function. (FOR_EACH_DISASSEMBLER_OPTION): New macro. opcodes/ * disassemble.c Include "safe-ctype.h". (disassemble_init_for_target): Handle s390 init. (remove_whitespace_and_extra_commas): New function. (disassembler_options_cmp): Likewise. * arm-dis.c: Include "libiberty.h". (NUM_ELEM): Delete. (regnames): Use long disassembler style names. Add force-thumb and no-force-thumb options. (NUM_ARM_REGNAMES): Rename from this... (NUM_ARM_OPTIONS): ...to this. Use ARRAY_SIZE. (get_arm_regname_num_options): Delete. (set_arm_regname_option): Likewise. (get_arm_regnames): Likewise. (parse_disassembler_options): Likewise. (parse_arm_disassembler_option): Rename from this... (parse_arm_disassembler_options): ...to this. Make static. Use new FOR_EACH_DISASSEMBLER_OPTION macro to scan over options. (print_insn): Use parse_arm_disassembler_options. (disassembler_options_arm): New function. (print_arm_disassembler_options): Handle updated regnames. * ppc-dis.c: Include "libiberty.h". (ppc_opts): Add "32" and "64" entries. (ppc_parse_cpu): Use ARRAY_SIZE and disassembler_options_cmp. (powerpc_init_dialect): Add break to switch statement. Use new FOR_EACH_DISASSEMBLER_OPTION macro. (disassembler_options_powerpc): New function. (print_ppc_disassembler_options): Use ARRAY_SIZE. Remove printing of "32" and "64". * s390-dis.c: Include "libiberty.h". (init_flag): Remove unneeded variable. (struct s390_options_t): New structure type. (options): New structure. (init_disasm): Rename from this... (disassemble_init_s390): ...to this. Add initializations for current_arch_mask and option_use_insn_len_bits_p. Remove init_flag. (print_insn_s390): Delete call to init_disasm. (disassembler_options_s390): New function. (print_s390_disassembler_options): Print using information from struct 'options'. * po/opcodes.pot: Regenerate. binutils/ * objdump.c (main): Use remove_whitespace_and_extra_commas. gdb/ * NEWS: Mention new set/show disassembler-options commands. * doc/gdb.texinfo: Document new set/show disassembler-options commands. * disasm.c: Include "arch-utils.h", "gdbcmd.h" and "safe-ctype.h". (prospective_options): New static variable. (gdb_disassembler::gdb_disassembler): Initialize m_di.disassembler_options. (gdb_buffered_insn_length_init_dis): Initilize di->disassembler_options. (get_disassembler_options): New function. (set_disassembler_options): Likewise. (set_disassembler_options_sfunc): Likewise. (show_disassembler_options_sfunc): Likewise. (disassembler_options_completer): Likewise. (_initialize_disasm): Likewise. * disasm.h (get_disassembler_options): New prototype. (set_disassembler_options): Likewise. * gdbarch.sh (gdbarch_disassembler_options): New variable. (gdbarch_verify_disassembler_options): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * arm-tdep.c (num_disassembly_options): Delete. (set_disassembly_style): Likewise. (arm_disassembler_options): New static variable. (set_disassembly_style_sfunc): Convert short style name into long option name. Call set_disassembler_options. (show_disassembly_style_sfunc): New function. (arm_gdbarch_init): Call set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. (_initialize_arm_tdep): Delete regnames variable and update callers. (arm_disassembler_options): Initialize. (disasm_options): New variable. (num_disassembly_options): Rename from this... (num_disassembly_styles): ...to this. Compute by scanning through disasm_options. (valid_disassembly_styles): Initialize using disasm_options. Remove calls to parse_arm_disassembler_option, get_arm_regnames and set_arm_regname_option. Pass show_disassembly_style_sfunc to the "disassembler" setshow command. * rs6000-tdep.c (powerpc_disassembler_options): New static variable. (rs6000_gdbarch_init): Call set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. * s390-tdep.c (s390_disassembler_options): New static variable. (s390_gdbarch_init):all set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. gdb/testsuite/ * gdb.arch/powerpc-power.exp: Delete test. * gdb.arch/powerpc-power.s: Likewise. * gdb.disasm/disassembler-options.exp: New test. * gdb.arch/powerpc-altivec.exp: Likewise. * gdb.arch/powerpc-altivec.s: Likewise. * gdb.arch/powerpc-altivec2.exp: Likewise. * gdb.arch/powerpc-altivec2.s: Likewise. * gdb.arch/powerpc-altivec3.exp: Likewise. * gdb.arch/powerpc-altivec3.s: Likewise. * gdb.arch/powerpc-power7.exp: Likewise. * gdb.arch/powerpc-power7.s: Likewise. * gdb.arch/powerpc-power8.exp: Likewise. * gdb.arch/powerpc-power8.s: Likewise. * gdb.arch/powerpc-power9.exp: Likewise. * gdb.arch/powerpc-power9.s: Likewise. * gdb.arch/powerpc-vsx.exp: Likewise. * gdb.arch/powerpc-vsx.s: Likewise. * gdb.arch/powerpc-vsx2.exp: Likewise. * gdb.arch/powerpc-vsx2.s: Likewise. * gdb.arch/powerpc-vsx3.exp: Likewise. * gdb.arch/powerpc-vsx3.s: Likewise. * gdb.arch/arm-disassembler-options.exp: Likewise. * gdb.arch/powerpc-disassembler-options.exp: Likewise. * gdb.arch/s390-disassembler-options.exp: Likewise.
2017-01-02Update year range in copyright notice of all files.Alan Modra1-1/+1
2016-12-08Fix crash when disassembling invalid range on powerpc vleLuis Machado1-1/+1
I got a report of a gdb crash for vle and further investigation showed an attempt to disassemble an invalid memory range. I tracked the crash down to the code in get_powerpc_dialect, where we fail to make sure we have a valid section pointer before dereferencing it. There is no such problem for rs6000-based disassembling. opcodes/ChangeLog: 2016-12-08 Luis Machado <lgustavo@codesourcery.com> * ppc-dis.c (get_powerpc_dialect): Check NULL info->section.
2016-08-01 Fix some PowerPC VLE BFD issues and add some PowerPC VLE instructions.Andrew Jenner1-0/+5
bfd/ * elf32-ppc.c (is_branch_reloc): Recognise VLE branch relocations. (ppc_elf_howto_raw): Fix dst_mask of R_PPC_VLE_REL15. (ppc_elf_vle_split16): Clear field before inserting. opcodes/ * ppc-opc.c (vle_opcodes): Alias 'e_cmpwi' to 'e_cmpi' and 'e_cmplwi' to 'e_cmpli' instead. (OPVUPRT, OPVUPRT_MASK): Define. (powerpc_opcodes): Add E200Z4 insns. (vle_opcodes): Add context save/restore insns. include/ * opcode/ppc.h (PPC_OPCODE_E200Z4): New define.
2016-06-07PowerPC VLEAlan Modra1-34/+37
VLE is an encoding, not a particular processor architecture, so it isn't really proper to select insns based on PPC_OPCODE_VLE. For example {"evaddw", VX (4, 512), VX_MASK, PPCSPE|PPCVLE, PPCNONE, {RS, RA, RB}}, {"vaddubs", VX (4, 512), VX_MASK, PPCVEC|PPCVLE, PPCNONE, {VD, VA, VB}}, shows two insns that have the same encoding, both available with VLE. Enabling both with VLE means we can't disassemble the second variant even if -Maltivec is given rather than -Mspe. Also, we don't check user assembly against the processor type as well as we could. Another problem is that when using the VLE encoding, insns from the main ppc opcode table are not available, except those using opcode 4 and 31. Correcting this revealed two errors in the ld testsuite, use of "nop" and "rfmci" when -mvle. This patch fixes those problems in the opcode table, and removes PPCNONE. I find a plain 0 distracts less from other values. In addition, I've implemented code to recognize some machine values from the apuinfo note present in ppc32 objects. It's not a complete disambiguation since we're lacking info to detect newer chips, but what we have should help with disassembly. include/ * elf/ppc.h (APUINFO_SECTION_NAME, APUINFO_LABEL, PPC_APUINFO_ISEL, PPC_APUINFO_PMR, PPC_APUINFO_RFMCI, PPC_APUINFO_CACHELCK, PPC_APUINFO_SPE, PPC_APUINFO_EFS, PPC_APUINFO_BRLOCK, PPC_APUINFO_VLE: Define. opcodes/ * ppc-dis.c (ppc_opts): Delete extraneous parentheses. Default cpu for "vle" to e500. * ppc-opc.c (ALLOW8_SPRG): Remove PPC_OPCODE_VLE. (NO371, PPCSPE, PPCISEL, PPCEFS, MULHW, DCBT_EO): Likewise. (PPCNONE): Delete, substitute throughout. (powerpc_opcodes): Remove PPCVLE from "flags". Add to "deprecated" except for major opcode 4 and 31. (vle_opcodes <se_rfmci>): Add PPCRFMCI to flags. bfd/ * cpu-powerpc.c (powerpc_compatible): Allow bfd_mach_ppc_vle entry to match other 32-bit archs. * elf32-ppc.c (_bfd_elf_ppc_set_arch): New function. (ppc_elf_object_p): Call it. (ppc_elf_special_sections): Use APUINFO_SECTION_NAME. Fix overlong line. (APUINFO_SECTION_NAME, APUINFO_LABEL): Don't define here. * elf64-ppc.c (ppc64_elf_object_p): Call _bfd_elf_ppc_set_arch. * bfd-in.h (_bfd_elf_ppc_at_tls_transform, _bfd_elf_ppc_at_tprel_transform): Move to.. * elf-bfd.h: ..here. (_bfd_elf_ppc_set_arch): Declare. * bfd-in2.h: Regenerate. gas/ * config/tc-ppc.c (PPC_APUINFO_ISEL, PPC_APUINFO_PMR, PPC_APUINFO_RFMCI, PPC_APUINFO_CACHELCK, PPC_APUINFO_SPE, PPC_APUINFO_EFS, PPC_APUINFO_BRLOCK, PPC_APUINFO_VLE): Don't define. (ppc_setup_opcodes): Check vle disables powerpc_opcodes overridden by vle_opcodes, and that vle flag doesn't enable opcodes. Don't add vle_opcodes twice. (ppc_cleanup): Use APUINFO_SECTION_NAME and APUINFO_LABEL. ld/ * testsuite/ld-powerpc/apuinfo1.s: Delete nop. * testsuite/ld-powerpc/apuinfo-vle2.s: New. * testsuite/ld-powerpc/powerpc.exp: Use apuinfo-vle2.s.
2016-01-01Copyright update for binutilsAlan Modra1-1/+1
2015-11-11Add assembler, disassembler and linker support for power9.Peter Bergner1-2/+14
include/opcode/ * ppc.h (PPC_OPCODE_POWER9): New define. (PPC_OPCODE_VSX3): Likewise. opcodes/ * ppc-dis.c (ppc_opts): Add "power9" and "pwr9" entries. Add PPC_OPCODE_VSX3 to the vsx entry. (powerpc_init_dialect): Set default dialect to power9. * ppc-opc.c (insert_dcmxs, extract_dcmxs, insert_dxd, extract_dxd, insert_dxdn, extract_dxdn, insert_l0, extract_l0, insert_l1, extract_l1 insert_xtq6, extract_xtq6): New static functions. (insert_esync): Test for illegal L operand value. (DCMX, DCMXS, DXD, NDXD, L0, L1, RC, FC, UIM6, X_R, RIC, PRS, XSQ6, XTQ6, LRAND, IMM8, DQX, DQX_MASK, DX, DX_MASK, VXVAPS_MASK, VXVA,XVA, XX2VA, XVARC, XBF_MASK, XX2UIM4_MASK, XX2BFD_MASK, XX2DCMXS_MASK, XVA_MASK, XRLA_MASK, XBFRARB_MASK, XLRAND_MASK, POWER9, PPCVEC3, PPCVSX3): New defines. (powerpc_opcodes) <ps_cmpu0, ps_cmpo0, ps_cmpu1, ps_cmpo1, fcmpu, fcmpo, ftdiv, ftsqrt>: Use XBF_MASK. <mcrxr>: Use XBFRARB_MASK. <addpcis, bcdcfn., bcdcfsq., bcdcfz., bcdcpsgn., bcdctn., bcdctsq., bcdctz., bcds., bcdsetsgn., bcdsr., bcdtrunc., bcdus., bcdutrunc., cmpeqb, cmprb, cnttzd, cnttzd., cnttzw, cnttzw., copy, copy_first, cp_abort, darn, dtstsfi, dtstsfiq, extswsli, extswsli., ldat, ldmx, lwat, lxsd, lxsibzx, lxsihzx, lxssp, lxv, lxvb16x, lxvh8x, lxvl, lxvll, lxvwsx, lxvx, maddhd, maddhdu, maddld, mcrxrx, mfvsrld, modsd, modsw, modud, moduw, msgsync, mtvsrdd, mtvsrws, paste, paste., paste_last, rmieg, setb, slbieg, slbsync, stdat, stop, stwat, stxsd, stxsibx, stxsihx, stxssp, stxv, stxvb16x, stxvh8x, stxvl, stxvll, stxvx, subpcis, urfid, vbpermd, vclzlsbb, vcmpneb, vcmpneb., vcmpneh, vcmpneh., vcmpnew, vcmpnew., vcmpnezb, vcmpnezb., vcmpnezh, vcmpnezh., vcmpnezw, vcmpnezw., vctzb, vctzd, vctzh, vctzlsbb, vctzw, vextractd, vextractub, vextractuh, vextractuw, vextsb2d, vextsb2w, vextsh2d, vextsh2w, vextsw2d, vextublx, vextubrx, vextuhlx, vextuhrx, vextuwlx, vextuwrx, vinsertb, vinsertd, vinserth, vinsertw, vmul10cuq, vmul10ecuq, vmul10euq, vmul10uq, vnegd, vnegw, vpermr, vprtybd, vprtybq, vprtybw, vrldmi, vrldnm, vrlwmi, vrlwnm, vslv, vsrv, wait, xsabsqp, xsaddqp, xsaddqpo, xscmpeqdp, xscmpexpdp, xscmpexpqp, xscmpgedp, xscmpgtdp, xscmpnedp, xscmpoqp, xscmpuqp, xscpsgnqp, xscvdphp, xscvdpqp, xscvhpdp, xscvqpdp, xscvqpdpo, xscvqpsdz, xscvqpswz, xscvqpudz, xscvqpuwz, xscvsdqp, xscvudqp, xsdivqp, xsdivqpo, xsiexpdp, xsiexpqp, xsmaddqp, xsmaddqpo, xsmaxcdp, xsmaxjdp, xsmincdp, xsminjdp, xsmsubqp, xsmsubqpo, xsmulqp, xsmulqpo, xsnabsqp, xsnegqp, xsnmaddqp, xsnmaddqpo, xsnmsubqp, xsnmsubqpo, xsrqpi, xsrqpix, xsrqpxp, xssqrtqp, xssqrtqpo, xssubqp, xssubqpo, xststdcdp, xststdcqp, xststdcsp, xsxexpdp, xsxexpqp, xsxsigdp, xsxsigqp, xvcmpnedp, xvcmpnedp., xvcmpnesp, xvcmpnesp., xvcvhpsp, xvcvsphp, xviexpdp, xviexpsp, xvtstdcdp, xvtstdcsp, xvxexpdp, xvxexpsp, xvxsigdp, xvxsigsp, xxbrd, xxbrh, xxbrq, xxbrw, xxextractuw, xxinsertw, xxperm, xxpermr, xxspltib>: New instructions. <doze, nap, sleep, rvwinkle, waitasec, lxvx, stxvx>: Disable on POWER9. <tlbiel, tlbie, sync, slbmfev, slbmfee>: Add additional operands. include/elf/ * ppc.h (R_PPC_REL16DX_HA): New reloction. * ppc64.h (R_PPC64_REL16DX_HA): Likewise. bfd/ * elf32-ppc.c (ppc_elf_howto_raw): Add R_PPC_REL16DX_HA. (ppc_elf_reloc_type_lookup): Handle R_PPC_REL16DX_HA. (ppc_elf_addr16_ha_reloc): Likewise. (ppc_elf_check_relocs): Likewise. (ppc_elf_relocate_section): Likewise. (is_insn_dq_form): Handle lxv and stxv instructions. * elf64-ppc.c (ppc64_elf_howto_raw): Add R_PPC64_REL16DX_HA. (ppc64_elf_reloc_type_lookup): Handle R_PPC64_REL16DX_HA. (ppc64_elf_ha_reloc): Likewise. (ppc64_elf_check_relocs): Likewise. (ppc64_elf_relocate_section): Likewise. * bfd-in2.h: Regenerate. * libbfd.h: Likewise. * reloc.c (BFD_RELOC_PPC_REL16DX_HA): New. elfcpp/ * powerpc.h (R_POWERPC_REL16DX_HA): Define. gas/ * doc/as.texinfo (Target PowerPC): Document -mpower9 and -mpwr9. * doc/c-ppc.texi (PowerPC-Opts): Likewise. * config/tc-ppc.c (md_show_usage): Likewise. (md_assemble): Handle BFD_RELOC_PPC_REL16DX_HA. (md_apply_fix): Likewise. (ppc_handle_align): Handle power9's group ending nop. gas/testsuite/ * gas/ppc/altivec3.s: New test. * gas/ppc/altivec3.d: Likewise. * gas/ppc/vsx3.s: Likewise. * gas/ppc/vsx3.d: Likewise. * gas/ppc/power9.s: Likewise. * gas/ppc/power9.d: Likewise. * gas/ppc/ppc.exp: Run them. * gas/ppc/power8.s <lxvx, lxvd2x, stxvx, stxvd2x>: Add new tests. * gas/ppc/power8.d: Likewise. * gas/ppc/vsx.s: <lxvx, stxvx>: Rename invalid mnemonics ... <lxvd2x, stxvd2x>: ...to this. * gas/ppc/vsx.d: Likewise. gold/ * gold/powerpc.cc (Powerpc_relocate_functions::addr16_dq): New function. (Powerpc_relocate_functions::addr16dx_ha): Likewise. (Target_powerpc::Scan::local): Handle R_POWERPC_REL16DX_HA. (Target_powerpc::Scan::global): Likewise. (Target_powerpc::Relocate::relocate): Likewise. ld/testsuite/ * ld-powerpc/addpcis.d: New test. * ld-powerpc/addpcis.s: New test. * ld-powerpc/powerpc.exp: Run it.
2015-08-12Remove trailing spaces in opcodesH.J. Lu1-1/+1
2015-07-03Remove ppc860, ppc750cl, ppc7450 insns from common ppc.Alan Modra1-2/+8
Back in the day support for these processors was added, we probably didn't want to waste PPC_OPCODE bits on minor variations. I've had a complaint that disassembly of mfspr/mtspr was wrong for power8. This patch fixes that problem. Note that since -m860/-m850/-m821 are new gas options enabling the mpc8xx specific mfspr/mtspr variants it is possible that this change will break some mpc8xx assembly code. ie. you might need to modify makefiles to pass -m860 to gas. include/opcode/ * ppc.h (PPC_OPCODE_750, PPC_OPCODE_7450, PPC_OPCODE_860): Define. opcodes/ * ppc-opc.c (PPC750, PPC7450, PPC860): Define using PPC_OPCODE_*. * ppc-dis.c (ppc_opts): Add 821, 850 and 860 entries. Add PPC_OPCODE_7450 to 7450 entry. Add PPC_OPCODE_750 to 750cl entry. gas/ * config/tc-ppc.c (md_show_usage): Add -m821, -m850, -m860. * doc/c-ppc.texi (PowerPC-Opts): Likewise. gas/testsuite/ * gas/ppc/titan.d: Correct mfmcsrr0 disassembly.
2015-06-19Allow for optional operands with non-zero default values.Peter Bergner1-1/+2
ISA 2.07 (ie, POWER8) added the rfebb instruction which takes one operand with the value of either a 0 or 1. It also defines an extended mnemonic with no operands (ie, "rfebb") that is supposed to be equivalent to "rfebb 1". I implemented rfebb's lone operand with PPC_OPERAND_OPTIONAL, but the problem is, optional operands that are ommitted always default to the value 0, which is wrong in this case. I have added support for allowing non-zero default values by adding an additional flag PPC_OPERAND_OPTIONAL_VALUE that specifies that the default operand value to be used is stored in the SHIFT field of the operand field immediately following this one. This fixes the rfebb issue. I also fixed the mftb and mfcr instructions so they use the same mechanism. This allows us to flag invalid uses of mfcr where we explicitly pass in a zero FXM value, like the use in a2.[sd]. include/opcode/ * ppc.h (PPC_OPERAND_OPTIONAL_VALUE): New. (ppc_optional_operand_value): New inline function. opcodes/ * ppc-dis.h (skip_optional_operands): Use ppc_optional_operand_value. * ppc-opc.c (FXM4): Add non-zero optional value. (TBR): Likewise. (SXL): Likewise. (insert_fxm): Handle new default operand value. (extract_fxm): Likewise. (insert_tbr): Likewise. (extract_tbr): Likewise. gas/ * config/tc-ppc.c (md_assemble): Use ppc_optional_operand_value. Allow for optional operands without insert functions. gas/testsuite/ * gas/ppc/power8.d: Fixup rfebb test results. * gas/ppc/a2.s: Fix invalid mfcr test. * gas/ppc/a2.d: Likewise.
2015-03-26powerpc: Only initialise opcode indices onceAnton Blanchard1-25/+29
The gdb TUI is calling gdb_print_insn() (which calls disassemble_init_powerpc()) enough to show up high in profiles. As suggested by Alan, only initialise if the indices are empty. opcodes/ChangeLog: 2015-03-25 Anton Blanchard <anton@samba.org> * ppc-dis.c (disassemble_init_powerpc): Only initialise powerpc_opcd_indices and vle_opcd_indices once.
2015-01-02ChangeLog rotatation and copyright year updateAlan Modra1-1/+1
2014-03-05Update copyright yearsAlan Modra1-2/+1
2013-07-30opcodes/Peter Bergner1-28/+11
* ppc-dis.c (powerpc_init_dialect): Use ppc_parse_cpu() to set dialect.
2013-05-21opcodes/Peter Bergner1-4/+1
* ppc-dis.c (powerpc_init_dialect): Set default dialect to power8. * ppc-opc.c (BHRBE, ST, SIX, PS, SXL, VXPS_MASK, XX1RB_MASK, XLS_MASK, PPCVSX2): New defines. (powerpc_opcodes) <bcdadd., bcdsub., bctar, bctar, bctarl, clrbhrb, fmrgew, fmrgow, lqarx, lxsiwax, lxsiwzx, lxsspx, mfbhrbe, mffprd, mffprwz, mfvrd, mfvrwz, mfvsrd, mfvsrwz, msgclrp, msgsndp, mtfprd, mtfprwa, mtfprwz, mtsle, mtvrd, mtvrwa, mtvrwz, mtvsrd, mtvsrwa, mtvsrwz, pbt., rfebb, stqcx., stxsiwx, stxsspx, vaddcuq, vaddecuq, vaddeuqm, vaddudm, vadduqm, vbpermq, vcipher, vcipherlast, vclzb, vclzd, vclzh, vclzw, vcmpequd, vcmpequd., vcmpgtsd, vcmpgtsd., vcmpgtud, vcmpgtud., veqv, vgbbd, vmaxsd, vmaxud, vminsd, vminud, vmrgew, vmrgow, vmulesw, vmuleuw, vmulosw, vmulouw, vmuluwm, vnand, vncipher, vncipherlast, vorc, vpermxor, vpksdss, vpksdus, vpkudum, vpkudus, vpmsumb, vpmsumd, vpmsumh, vpmsumw, vpopcntb, vpopcntd, vpopcnth, vpopcntw, vrld, vsbox, vshasigmad, vshasigmaw, vsld, vsrad, vsrd, vsubcuq, vsubecuq, vsubeuqm, vsubudm, vsubuqm, vupkhsw, vupklsw, waitasec, xsaddsp, xscvdpspn, xscvspdpn, xscvsxdsp, xscvuxdsp, xsdivsp, xsmaddasp, xsmaddmsp, xsmsubasp, xsmsubmsp, xsmulsp, xsnmaddasp, xsnmaddmsp, xsnmsubasp, xsnmsubmsp, xsresp, xsrsp, xsrsqrtesp, xssqrtsp, xssubsp, xxleqv, xxlnand, xxlorc>: New instructions. <lxvx, stxvx>: New extended mnemonics. gas/ * config/tc-ppc.c (ppc_setup_opcodes): Use new_seg to fix error and clean up warning when using PRINT_OPCODE_TABLE. gas/testsuite/ * gas/ppc/altivec2.d <bcdadd., bcdadd., vaddcuq, vaddecuq, vaddeuqm, vaddudm, vadduqm, vbpermq, vcipher, vcipherlast, vclzb, vclzd, vclzh, vclzw, vcmpequd, vcmpequd., vcmpgtsd, vcmpgtsd., vcmpgtud, vcmpgtud., veqv, vgbbd, vmaxsd, vmaxud, vminsd, vminud, vmrgew, vmrgow, vmulesw, vmuleuw, vmulosw, vmulouw, vmuluwm, vnand, vncipher, vncipherlast, vorc, vpermxor, vpksdss, vpksdus, vpkudum, vpkudus, vpmsumb, vpmsumd, vpmsumh, vpmsumw, vpopcntb, vpopcntd, vpopcnth, vpopcntw, vrld, vsbox, vshasigmad, vshasigmaw, vsld, vsrad, vsrd, vsubcuq, vsubecuq, vsubeuqm, vsubudm, vsubuqm, vupkhsw, vupklsw>: Add new tests. * gas/ppc/altivec2.s: Likewise. * gas/ppc/power8.d <bcdadd., bcdsub., bctar, bctarl, clrbhrb, fmrgew, fmrgow, lqarx, lxsiwax, lxsiwzx, lxsspx, mfbhrbe, mfvsrd, mfvsrwz, msgclrp, msgsndp, mtsle, mtvsrd, mtvsrwa, mtvsrwz, pbt., rfebb, stqcx., stxsiwx, stxsspx, vaddcuq, vaddecuq, vaddeuqm, vaddudm, vadduqm, vbpermq, vcipher, vcipherlast, vclzb, vclzd, vclzh, vclzw, vcmpequd, vcmpequd., vcmpgtsd, vcmpgtsd., vcmpgtud, vcmpgtud., veqv, vgbbd, vmaxsd, vmaxud, vminsd, vminud, vmrgow, vmulesw, vmuleuw, vmulosw, vmulouw, vmuluwm, vnand, vncipher, vncipherlast, vorc, vpermxor, vpksdss, vpksdus, vpkudum, vpkudus, vpmsumb, vpmsumd, vpmsumh, vpmsumw, vpopcntb, vpopcntd, vpopcnth, vpopcntw, vrld, vsbox, vshasigmad, vshasigmaw, vsld, vsrad, vsrd, vsubcuq, vsubecuq, vsubeuqm, vsubuqm, vupkhsw, vupklsw, waitasec, xsaddsp, xscvdpspn, xscvspdpn, xscvsxdsp, xscvuxdsp, xsdivsp, xsmaddasp, xsmaddmsp, xsmsubasp, xsmsubmsp, xsmulsp, xsnmaddasp, xsnmaddmsp, xsnmsubasp, xsnmsubmsp, xsresp, xsrsp, xsrsqrtesp, xssqrtsp, xssubsp, xxleqv, xxlnand, xxlorc>: Add new tests. * gas/ppc/power8.s Likewise. * gas/ppc/vsx.d <lxvd2x, stxvd2x>: Add new tests. * gas/ppc/vsx.s Likewise. * gas/ppc/vsx2.d: New test file. * gas/ppc/vsx2.s: Likewise. * gas/ppc/ppc.exp: Run it.
2013-01-11include/opcode/Peter Bergner1-0/+12
* ppc.h (PPC_OPCODE_POWER8): New define. (PPC_OPCODE_HTM): Likewise. opcodes/ * ppc-dis.c (ppc_opts): Add "power8", "pwr8" and "htm" entries. * ppc-opc.c (HTM_R, HTM_SI, XRTRB_MASK, XRTRARB_MASK, XRTLRARB_MASK, XRTARARB_MASK, XRTBFRARB_MASK, XRCL, POWER8, PPCHTM): New defines. (SH6): Update. <"tabort.", "tabortdc.", "tabortdci.", "tabortwc.", "tabortwci.", "tbegin.", "tcheck", "tend.", "trechkpt.", "treclaim.", "tsr.">: Add POWER8 HTM opcodes. <"tendall.", "tresume.", "tsuspend.">: Add POWER8 HTM extended opcodes. gas/ * doc/as.texinfo (Target PowerPC): Document -mpower8 and -mhtm. * doc/c-ppc.texi (PowerPC-Opts): Likewise. * config/tc-ppc.c (md_show_usage): Likewise. (ppc_handle_align): Handle power8's group ending nop. gas/testsuite/ * gas/ppc/htm.d: New test. * gas/ppc/htm.s: Likewise. * gas/ppc/power8.d: Likewise. * gas/ppc/power8.s: Likewise. * gas/ppc/ppc.exp: Run them.
2012-11-23include/opcode/Alan Modra1-24/+68
* ppc.h (ppc_parse_cpu): Update prototype. opcodes/ * ppc-dis.c (ppc_parse_cpu): Add "sticky" param. Track bits set from ppc_opts.sticky in it. Delete "retain_mask". (powerpc_init_dialect): Choose default dialect from info->mach before parsing -M options. Handle more bfd_mach_ppc variants. Update common default to power7. gas/ * config/tc-ppc.c (sticky): New var. (md_parse_option, ppc_machine): Update ppc_parse_cpu calls. gas/testsuite/ * gas/ppc/astest2.d: Pass -Mppc to objdump. ld/testsuite/ * ld-powerpc/plt1.d: Update for default "at" branch hints. * ld-powerpc/tlsexe.d: Likewise. * ld-powerpc/tlsexetoc.d: Likewise. * ld-powerpc/tlsopt1.d: Likewise. * ld-powerpc/tlsopt1_32.d: Likewise. * ld-powerpc/tlsopt2.d: Likewise. * ld-powerpc/tlsopt2_32.d: Likewise. * ld-powerpc/tlsopt4.d: Likewise. * ld-powerpc/tlsopt4_32.d: Likewise. * ld-powerpc/tlsso.d: Likewise. * ld-powerpc/tlstocso.d: Likewise.
generated by cgit v1.1 at 2024-11-25 15:00:29 +0000