| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Back in the day support for these processors was added, we probably
didn't want to waste PPC_OPCODE bits on minor variations. I've had a
complaint that disassembly of mfspr/mtspr was wrong for power8. This
patch fixes that problem.
Note that since -m860/-m850/-m821 are new gas options enabling the
mpc8xx specific mfspr/mtspr variants it is possible that this change
will break some mpc8xx assembly code. ie. you might need to modify
makefiles to pass -m860 to gas.
include/opcode/
* ppc.h (PPC_OPCODE_750, PPC_OPCODE_7450, PPC_OPCODE_860): Define.
opcodes/
* ppc-opc.c (PPC750, PPC7450, PPC860): Define using PPC_OPCODE_*.
* ppc-dis.c (ppc_opts): Add 821, 850 and 860 entries. Add
PPC_OPCODE_7450 to 7450 entry. Add PPC_OPCODE_750 to 750cl entry.
gas/
* config/tc-ppc.c (md_show_usage): Add -m821, -m850, -m860.
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
gas/testsuite/
* gas/ppc/titan.d: Correct mfmcsrr0 disassembly.
|
|
ISA 2.07 (ie, POWER8) added the rfebb instruction which takes one operand
with the value of either a 0 or 1. It also defines an extended mnemonic
with no operands (ie, "rfebb") that is supposed to be equivalent to "rfebb 1".
I implemented rfebb's lone operand with PPC_OPERAND_OPTIONAL, but the
problem is, optional operands that are ommitted always default to the
value 0, which is wrong in this case. I have added support for allowing
non-zero default values by adding an additional flag PPC_OPERAND_OPTIONAL_VALUE
that specifies that the default operand value to be used is stored in the
SHIFT field of the operand field immediately following this one.
This fixes the rfebb issue. I also fixed the mftb and mfcr instructions
so they use the same mechanism. This allows us to flag invalid uses of
mfcr where we explicitly pass in a zero FXM value, like the use in a2.[sd].
include/opcode/
* ppc.h (PPC_OPERAND_OPTIONAL_VALUE): New.
(ppc_optional_operand_value): New inline function.
opcodes/
* ppc-dis.h (skip_optional_operands): Use ppc_optional_operand_value.
* ppc-opc.c (FXM4): Add non-zero optional value.
(TBR): Likewise.
(SXL): Likewise.
(insert_fxm): Handle new default operand value.
(extract_fxm): Likewise.
(insert_tbr): Likewise.
(extract_tbr): Likewise.
gas/
* config/tc-ppc.c (md_assemble): Use ppc_optional_operand_value.
Allow for optional operands without insert functions.
gas/testsuite/
* gas/ppc/power8.d: Fixup rfebb test results.
* gas/ppc/a2.s: Fix invalid mfcr test.
* gas/ppc/a2.d: Likewise.
|
|
The gdb TUI is calling gdb_print_insn() (which calls
disassemble_init_powerpc()) enough to show up high in profiles. As
suggested by Alan, only initialise if the indices are empty.
opcodes/ChangeLog:
2015-03-25 Anton Blanchard <anton@samba.org>
* ppc-dis.c (disassemble_init_powerpc): Only initialise
powerpc_opcd_indices and vle_opcd_indices once.
|
|
|
|
|
|
* ppc-dis.c (powerpc_init_dialect): Use ppc_parse_cpu() to set dialect.
|
|
* ppc-dis.c (powerpc_init_dialect): Set default dialect to power8.
* ppc-opc.c (BHRBE, ST, SIX, PS, SXL, VXPS_MASK, XX1RB_MASK,
XLS_MASK, PPCVSX2): New defines.
(powerpc_opcodes) <bcdadd., bcdsub., bctar, bctar, bctarl, clrbhrb,
fmrgew, fmrgow, lqarx, lxsiwax, lxsiwzx, lxsspx, mfbhrbe,
mffprd, mffprwz, mfvrd, mfvrwz, mfvsrd, mfvsrwz, msgclrp, msgsndp,
mtfprd, mtfprwa, mtfprwz, mtsle, mtvrd, mtvrwa, mtvrwz, mtvsrd,
mtvsrwa, mtvsrwz, pbt., rfebb, stqcx., stxsiwx, stxsspx,
vaddcuq, vaddecuq, vaddeuqm, vaddudm, vadduqm, vbpermq, vcipher,
vcipherlast, vclzb, vclzd, vclzh, vclzw, vcmpequd, vcmpequd.,
vcmpgtsd, vcmpgtsd., vcmpgtud, vcmpgtud., veqv, vgbbd, vmaxsd,
vmaxud, vminsd, vminud, vmrgew, vmrgow, vmulesw, vmuleuw, vmulosw,
vmulouw, vmuluwm, vnand, vncipher, vncipherlast, vorc, vpermxor,
vpksdss, vpksdus, vpkudum, vpkudus, vpmsumb, vpmsumd, vpmsumh,
vpmsumw, vpopcntb, vpopcntd, vpopcnth, vpopcntw, vrld, vsbox,
vshasigmad, vshasigmaw, vsld, vsrad, vsrd, vsubcuq, vsubecuq,
vsubeuqm, vsubudm, vsubuqm, vupkhsw, vupklsw, waitasec, xsaddsp,
xscvdpspn, xscvspdpn, xscvsxdsp, xscvuxdsp, xsdivsp, xsmaddasp,
xsmaddmsp, xsmsubasp, xsmsubmsp, xsmulsp, xsnmaddasp, xsnmaddmsp,
xsnmsubasp, xsnmsubmsp, xsresp, xsrsp, xsrsqrtesp, xssqrtsp,
xssubsp, xxleqv, xxlnand, xxlorc>: New instructions.
<lxvx, stxvx>: New extended mnemonics.
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Use new_seg to fix error
and clean up warning when using PRINT_OPCODE_TABLE.
gas/testsuite/
* gas/ppc/altivec2.d <bcdadd., bcdadd., vaddcuq, vaddecuq, vaddeuqm,
vaddudm, vadduqm, vbpermq, vcipher, vcipherlast, vclzb, vclzd, vclzh,
vclzw, vcmpequd, vcmpequd., vcmpgtsd, vcmpgtsd., vcmpgtud, vcmpgtud.,
veqv, vgbbd, vmaxsd, vmaxud, vminsd, vminud, vmrgew, vmrgow, vmulesw,
vmuleuw, vmulosw, vmulouw, vmuluwm, vnand, vncipher, vncipherlast,
vorc, vpermxor, vpksdss, vpksdus, vpkudum, vpkudus, vpmsumb, vpmsumd,
vpmsumh, vpmsumw, vpopcntb, vpopcntd, vpopcnth, vpopcntw, vrld, vsbox,
vshasigmad, vshasigmaw, vsld, vsrad, vsrd, vsubcuq, vsubecuq, vsubeuqm,
vsubudm, vsubuqm, vupkhsw, vupklsw>: Add new tests.
* gas/ppc/altivec2.s: Likewise.
* gas/ppc/power8.d <bcdadd., bcdsub., bctar, bctarl, clrbhrb, fmrgew,
fmrgow, lqarx, lxsiwax, lxsiwzx, lxsspx, mfbhrbe, mfvsrd, mfvsrwz,
msgclrp, msgsndp, mtsle, mtvsrd, mtvsrwa, mtvsrwz, pbt., rfebb,
stqcx., stxsiwx, stxsspx, vaddcuq, vaddecuq, vaddeuqm, vaddudm,
vadduqm, vbpermq, vcipher, vcipherlast, vclzb, vclzd, vclzh, vclzw,
vcmpequd, vcmpequd., vcmpgtsd, vcmpgtsd., vcmpgtud, vcmpgtud., veqv,
vgbbd, vmaxsd, vmaxud, vminsd, vminud, vmrgow, vmulesw, vmuleuw,
vmulosw, vmulouw, vmuluwm, vnand, vncipher, vncipherlast, vorc,
vpermxor, vpksdss, vpksdus, vpkudum, vpkudus, vpmsumb, vpmsumd,
vpmsumh, vpmsumw, vpopcntb, vpopcntd, vpopcnth, vpopcntw, vrld, vsbox,
vshasigmad, vshasigmaw, vsld, vsrad, vsrd, vsubcuq, vsubecuq, vsubeuqm,
vsubuqm, vupkhsw, vupklsw, waitasec, xsaddsp, xscvdpspn, xscvspdpn,
xscvsxdsp, xscvuxdsp, xsdivsp, xsmaddasp, xsmaddmsp, xsmsubasp,
xsmsubmsp, xsmulsp, xsnmaddasp, xsnmaddmsp, xsnmsubasp, xsnmsubmsp,
xsresp, xsrsp, xsrsqrtesp, xssqrtsp, xssubsp, xxleqv, xxlnand,
xxlorc>: Add new tests.
* gas/ppc/power8.s Likewise.
* gas/ppc/vsx.d <lxvd2x, stxvd2x>: Add new tests.
* gas/ppc/vsx.s Likewise.
* gas/ppc/vsx2.d: New test file.
* gas/ppc/vsx2.s: Likewise.
* gas/ppc/ppc.exp: Run it.
|
|
* ppc.h (PPC_OPCODE_POWER8): New define.
(PPC_OPCODE_HTM): Likewise.
opcodes/
* ppc-dis.c (ppc_opts): Add "power8", "pwr8" and "htm" entries.
* ppc-opc.c (HTM_R, HTM_SI, XRTRB_MASK, XRTRARB_MASK, XRTLRARB_MASK,
XRTARARB_MASK, XRTBFRARB_MASK, XRCL, POWER8, PPCHTM): New defines.
(SH6): Update.
<"tabort.", "tabortdc.", "tabortdci.", "tabortwc.",
"tabortwci.", "tbegin.", "tcheck", "tend.", "trechkpt.",
"treclaim.", "tsr.">: Add POWER8 HTM opcodes.
<"tendall.", "tresume.", "tsuspend.">: Add POWER8 HTM extended opcodes.
gas/
* doc/as.texinfo (Target PowerPC): Document -mpower8 and -mhtm.
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
* config/tc-ppc.c (md_show_usage): Likewise.
(ppc_handle_align): Handle power8's group ending nop.
gas/testsuite/
* gas/ppc/htm.d: New test.
* gas/ppc/htm.s: Likewise.
* gas/ppc/power8.d: Likewise.
* gas/ppc/power8.s: Likewise.
* gas/ppc/ppc.exp: Run them.
|
|
* ppc.h (ppc_parse_cpu): Update prototype.
opcodes/
* ppc-dis.c (ppc_parse_cpu): Add "sticky" param. Track bits
set from ppc_opts.sticky in it. Delete "retain_mask".
(powerpc_init_dialect): Choose default dialect from info->mach
before parsing -M options. Handle more bfd_mach_ppc variants.
Update common default to power7.
gas/
* config/tc-ppc.c (sticky): New var.
(md_parse_option, ppc_machine): Update ppc_parse_cpu calls.
gas/testsuite/
* gas/ppc/astest2.d: Pass -Mppc to objdump.
ld/testsuite/
* ld-powerpc/plt1.d: Update for default "at" branch hints.
* ld-powerpc/tlsexe.d: Likewise.
* ld-powerpc/tlsexetoc.d: Likewise.
* ld-powerpc/tlsopt1.d: Likewise.
* ld-powerpc/tlsopt1_32.d: Likewise.
* ld-powerpc/tlsopt2.d: Likewise.
* ld-powerpc/tlsopt2_32.d: Likewise.
* ld-powerpc/tlsopt4.d: Likewise.
* ld-powerpc/tlsopt4_32.d: Likewise.
* ld-powerpc/tlsso.d: Likewise.
* ld-powerpc/tlstocso.d: Likewise.
|
|
* ppc-dis.c (ppc_opts) <altivec>: Use PPC_OPCODE_ALTIVEC2;
* ppc-opc.c (VBA): New define.
(powerpc_opcodes) <vcuxwfp, vcsxwfp, vcfpuxws, vcfpsxsw, vmr, vnot,
mfppr, mfppr32, mtppr, mtppr32>: New extended mnemonics.
gas/testsuite/
* gas/ppc/power7.d: Add tests for mfppr, mfppr32, mtppr and mtppr32.
* gas/ppc/power7.s: Likewise.
* gas/ppc/altivec.d: Add tests for all legacy Altivec instructions.
* gas/ppc/altivec.s: Likewise.
* gas/ppc/altivec2.d: New test file.
* gas/ppc/altivec2.s: Likewise.
* gas/ppc/ppc.exp: Run it.
|
|
* arm-dis.c: Add necessary casts for printing integer values.
Use %s when printing string values.
* hppa-dis.c: Likewise.
* m68k-dis.c: Likewise.
* microblaze-dis.c: Likewise.
* mips-dis.c: Likewise.
* ppc-dis.c: Likewise.
* sparc-dis.c: Likewise.
* dis-asm.h (fprintf_ftype): Add ATTRIBUTE_FPTR_PRINTF_2.
|
|
* elf32-ppc.h (has_vle_insns, is_ppc_vle): Delete.
(has_tls_reloc, has_tls_get_addr_call): Move back to..
* elf32-ppc.c: ..here.
(ppc_elf_section_flags, elf_backend_section_flags): Delete.
(ppc_elf_modify_segment_map): Use ELF sh_flags to detect VLE sections.
opcodes/
* ppc-dis.c: Don't include elf32-ppc.h, do include elf/ppc.h.
(get_powerpc_dialect): Detect VLE sections from ELF sh_flags.
ld/testsuite/
* ld-powerpc/vle.ld: New.
* ld-powerpc/powerpc.exp (vle reloc tests): Link using vle.ld.
|
|
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* sysdep.h: Generate an error if included before config.h.
* alpha-opc.c: Include sysdep.h before any other header file.
* alpha-dis.c: Likewise.
* avr-dis.c: Likewise.
* cgen-opc.c: Likewise.
* cr16-dis.c: Likewise.
* cris-dis.c: Likewise.
* crx-dis.c: Likewise.
* d10v-dis.c: Likewise.
* d10v-opc.c: Likewise.
* d30v-dis.c: Likewise.
* d30v-opc.c: Likewise.
* h8500-dis.c: Likewise.
* i370-dis.c: Likewise.
* i370-opc.c: Likewise.
* m10200-dis.c: Likewise.
* m10300-dis.c: Likewise.
* micromips-opc.c: Likewise.
* mips-opc.c: Likewise.
* mips61-opc.c: Likewise.
* moxie-dis.c: Likewise.
* or32-opc.c: Likewise.
* pj-dis.c: Likewise.
* ppc-dis.c: Likewise.
* ppc-opc.c: Likewise.
* s390-dis.c: Likewise.
* sh-dis.c: Likewise.
* sh64-dis.c: Likewise.
* sparc-dis.c: Likewise.
* sparc-opc.c: Likewise.
* spu-dis.c: Likewise.
* tic30-dis.c: Likewise.
* tic54x-dis.c: Likewise.
* tic80-dis.c: Likewise.
* tic80-opc.c: Likewise.
* tilegx-dis.c: Likewise.
* tilepro-dis.c: Likewise.
* v850-dis.c: Likewise.
* v850-opc.c: Likewise.
* vax-dis.c: Likewise.
* w65-dis.c: Likewise.
* xgate-dis.c: Likewise.
* xtensa-dis.c: Likewise.
* rl78-decode.opc: Likewise.
* rl78-decode.c: Regenerate.
* rx-decode.opc: Likewise.
* rx-decode.c: Regenerate.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* sysdep.h: Generate an error if included before config.h.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* aclocal.m4: Regenerate.
* bfd-in.h: Generate an error if included before config.h.
* sysdep.h: Likewise.
* bfd-in2.h: Regenerate.
* compress.c: Remove #include "config.h".
* plugin.c: Likewise.
* elf32-m68hc1x.c: Include sysdep.h before alloca-conf.h.
* elf64-hppa.c: Likewise.
* som.c: Likewise.
* xsymc.c: Likewise.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* aclocal.m4: Regenerate.
* Makefile.am: Use wrappers around C files generated by flex.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
* itbl-lex-wrapper.c: New file.
* config/bfin-lex-wrapper.c: New file.
* cgen.c: Include as.h before setjmp.h.
* config/tc-dlx.c: Include as.h before any other header.
* config/tc-h8300.c: Likewise.
* config/tc-lm32.c: Likewise.
* config/tc-mep.c: Likewise.
* config/tc-microblaze.c: Likewise.
* config/tc-mmix.c: Likewise.
* config/tc-msp430.c: Likewise.
* config/tc-or32.c: Likewise.
* config/tc-tic4x.c: Likewise.
* config/tc-tic54x.c: Likewise.
* config/tc-xtensa.c: Likewise.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* unwind-ia64.h: Include config.h.
|
|
* elf32-ppc.c (has_tls_reloc, has_tls_get_addr_call, has_vle_insns,
is_ppc_vle): Move to..
* elf32-ppc.h: ..here, making is_ppc_vle a macro.
opcodes/
* ppc_dis.c: Don't include elf/ppc.h.
|
|
2012-05-14 Catherine Moore <clm@codesourcery.com>
* NEWS: Mention PowerPC VLE port.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
bfd/
* bfd.c (bfd_lookup_section_flags): Add section parm.
* ecoff.c (bfd_debug_section): Remove flag_info initializer.
* elf-bfd.h (bfd_elf_section_data): Move in section_flag_info.
(bfd_elf_lookup_section_flags): Add section parm.
* elf32-ppc.c (is_ppc_vle): New function.
(ppc_elf_modify_segment_map): New function.
(elf_backend_modify_segment_map): Define.
(has_vle_insns): New define.
* elf32-ppc.h (ppc_elf_modify_segment_map): Declare.
* elflink.c (bfd_elf_lookup_section_flags): Add return value & parm.
Move in logic to omit / include a section.
* libbfd-in.h (bfd_link_info): Add section parm.
(bfd_generic_lookup_section_flags): Likewise.
* reloc.c (bfd_generic_lookup_section_flags): Likewise.
* section.c (bfd_section): Move out section_flag_info.
(BFD_FAKE_SECTION): Remove flag_info initializer.
* targets.c (_bfd_lookup_section_flags): Add section parm.
2012-05-14 Catherine Moore <clm@codesourcery.com>
bfd/
* archures.c (bfd_mach_ppc_vle): New.
* bfd-in2.h: Regenerated.
* cpu-powerpc.c (bfd_powerpc_archs): New entry for vle.
* elf32-ppc.c (split16_format_type): New enumeration.
(ppc_elf_vle_split16): New function.
(HOWTO): Add entries for R_PPC_VLE relocations.
(ppc_elf_reloc_type_lookup): Handle PPC_VLE relocations.
(ppc_elf_section_flags): New function.
(ppc_elf_lookup_section_flags): New function.
(ppc_elf_section_processing): New function.
(ppc_elf_check_relocs): Handle PPC_VLE relocations.
(ppc_elf_relocation_section): Likewise.
(elf_backend_lookup_section_flags_hook): Define.
(elf_backend_section_flags): Define.
(elf_backend_section_processing): Define.
* elf32-ppc.h (ppc_elf_section_processing): Declare.
* libbfd.h: Regenerated.
* reloc.c (BFD_RELOC_PPC_VLE_REL8, BFD_RELOC_PPC_VLE_REL15,
BFD_RELOC_PPC_VLE_REL24, BFD_RELOC_PPC_VLE_LO16A,
BFD_RELOC_PPC_VLE_LO16D, BFD_RELOC_PPC_VLE_HI16A,
BFD_RELOC_PPC_VLE_HI16D, BFD_RELOC_PPC_VLE_HA16A,
BFD_RELOC_PPC_VLE_HA16D, BFD_RELOC_PPC_VLE_SDA21,
BFD_RELOC_PPC_VLE_SDA21_LO, BFD_RELOC_PPC_VLE_SDAREL_LO16A,
BFD_RELOC_PPC_VLE_SDAREL_LO16D, BFD_RELOC_PPC_VLE_SDAREL_HI16A,
BFD_RELOC_PPC_VLE_SDAREL_HI16D, BFD_RELOC_PPC_VLE_SDAREL_HA16A,
BFD_RELOC_PPC_VLE_SDAREL_HA16D): New bfd relocations.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (insn_validate): New func of existing code to call..
(ppc_setup_opcodes): ..from 2 places here.
Revise for second (VLE) opcode table.
Add #ifdef'd code to print opcode tables.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Allow out-of-order
for the VLE conditional branches.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/
* config/tc-ppc.c (PPC_VLE_SPLIT16A): New macro.
(PPC_VLE_SPLIT16D): New macro.
(PPC_VLE_LO16A): New macro.
(PPC_VLE_LO16D): New macro.
(PPC_VLE_HI16A): New macro.
(PPC_VLE_HI16D): New macro.
(PPC_VLE_HA16A): New macro.
(PPC_VLE_HA16D): New macro.
(PPC_APUINFO_VLE): New definition.
(md_chars_to_number): New function.
(md_parse_option): Check for combinations of little
endian and -mvle.
(md_show_usage): Document -mvle.
(ppc_arch): Recognize VLE.
(ppc_mach): Recognize bfd_mach_ppc_vle.
(ppc_setup_opcodes): Print the opcode table if
* config/tc-ppc.h (ppc_frag_check): Declare.
* doc/c-ppc.texi: Document -mvle.
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
gas/
* config/tc-ppc.h (ppc_dw2_line_min_insn_length): Declare.
(DWARF2_LINE_MIN_INSN_LENGTH): Redefine.
* config/tc-ppc.c (ppc_dw2_line_min_insn_length): New.
* dwarf2dbg.c (scale_addr_delta): Handle values of 1
for DWARF2_LINE_MIN_INSN_LENGTH.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/testsuite/
* gas/ppc/ppc.exp: Run new tests.
* gas/ppc/vle-reloc.d: New test.
* gas/ppc/vle-reloc.s: New test.
* gas/ppc/vle-simple-1.d: New test.
* gas/ppc/vle-simple-1.s: New test.
* gas/ppc/vle-simple-2.d: New test.
* gas/ppc/vle-simple-2.s: New test.
* gas/ppc/vle-simple-3.d: New test.
* gas/ppc/vle-simple-3.s: New test.
* gas/ppc/vle-simple-4.d: New test.
* gas/ppc/vle-simple-4.s: New test.
* gas/ppc/vle-simple-5.d: New test.
* gas/ppc/vle-simple-5.s: New test.
* gas/ppc/vle-simple-6.d: New test.
* gas/ppc/vle-simple-6.s: New test.
* gas/ppc/vle.d: New test.
* gas/ppc/vle.s: New test.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (SEC_PPC_VLE): Remove.
2012-05-14 Catherine Moore <clm@codesourcery.com>
James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (R_PPC_VLE_REL8): New reloction.
(R_PPC_VLE_REL15): Likewise.
(R_PPC_VLE_REL24): Likewise.
(R_PPC_VLE_LO16A): Likewise.
(R_PPC_VLE_LO16D): Likewise.
(R_PPC_VLE_HI16A): Likewise.
(R_PPC_VLE_HI16D): Likewise.
(R_PPC_VLE_HA16A): Likewise.
(R_PPC_VLE_HA16D): Likewise.
(R_PPC_VLE_SDA21): Likewise.
(R_PPC_VLE_SDA21_LO): Likewise.
(R_PPC_VLE_SDAREL_LO16A): Likewise.
(R_PPC_VLE_SDAREL_LO16D): Likewise.
(R_PPC_VLE_SDAREL_HI16A): Likewise.
(R_PPC_VLE_SDAREL_HI16D): Likewise.
(R_PPC_VLE_SDAREL_HA16A): Likewise.
(R_PPC_VLE_SDAREL_HA16D): Likewise.
(SEC_PPC_VLE): Remove.
(PF_PPC_VLE): New program header flag.
(SHF_PPC_VLE): New section header flag.
(vle_opcodes, vle_num_opcodes): New.
(VLE_OP): New macro.
(VLE_OP_TO_SEG): New macro.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
include/opcode/
* ppc.h (PPC_OPCODE_VLE): New definition.
(PPC_OP_SA): New macro.
(PPC_OP_SE_VLE): New macro.
(PPC_OP): Use a variable shift amount.
(powerpc_operand): Update comments.
(PPC_OPSHIFT_INV): New macro.
(PPC_OPERAND_CR): Replace with...
(PPC_OPERAND_CR_BIT): ...this and
(PPC_OPERAND_CR_REG): ...this.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/
* ldlang.c (walk_wild_consider_section): Don't copy section_flag_list.
Pass it to callback.
(walk_wild_section_general): Pass section_flag_list to callback.
(lang_add_section): Add sflag_list parm.
Move out logic to keep / omit a section & call bfd_lookup_section_flags.
(output_section_callback_fast): Add sflag_list parm.
Add new parm to lang_add_section calls.
(output_section_callback): Likewise.
(check_section_callback): Add sflag_list parm.
(lang_place_orphans): Add new parm to lang_add_section calls.
(gc_section_callback): Add sflag_list parm.
(find_relro_section_callback): Likewise.
* ldlang.h (callback_t): Add flag_info parm.
(lang_add_section): Add sflag_list parm.
* emultempl/armelf.em (elf32_arm_add_stub_section):
Add lang_add_section parm.
* emultempl/beos.em (gld*_place_orphan): Likewise.
* emultempl/elf32.em (gld*_place_orphan): Likewise.
* emultempl/hppaelf.em (hppaelf_add_stub_section): Likewise.
* emultempl/m68hc1xelf.em (m68hc11elf_add_stub_section): Likewise.
* emultempl/mipself.em (mips_add_stub_section): Likewise.
* emultempl/mmo.em (mmo_place_orphan): Likewise.
* emultempl/pe.em (gld_*_place_orphan): Likewise.
* emultempl/pep.em (gld_*_place_orphan): Likewise.
* emultempl/ppc64elf.em (ppc_add_stub_section): Likewise.
* emultempl/spuelf.em (spu_place_special_section): Likewise.
* emultempl/vms.em (vms_place_orphan): Likewise.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/testsuite/
* ld-powerpc/powerpc.exp: Create ppceabitests.
* ld-powerpc/vle-multiseg.s: New.
* ld-powerpc/vle-multiseg-1.d: New.
* ld-powerpc/vle-multiseg-1.ld: New.
* ld-powerpc/vle-multiseg-2.d: New.
* ld-powerpc/vle-multiseg-2.ld: New.
* ld-powerpc/vle-multiseg-3.d: New.
* ld-powerpc/vle-multiseg-3.ld: New.
* ld-powerpc/vle-multiseg-4.d: New.
* ld-powerpc/vle-multiseg-4.ld: New.
* ld-powerpc/vle-multiseg-5.d: New.
* ld-powerpc/vle-multiseg-5.ld: New.
* ld-powerpc/vle-multiseg-6.d: New.
* ld-powerpc/vle-multiseg-6.ld: New.
* ld-powerpc/vle-multiseg-6a.s: New.
* ld-powerpc/vle-multiseg-6b.s: New.
* ld-powerpc/vle-multiseg-6c.s: New.
* ld-powerpc/vle-multiseg-6d.s: New.
* ld-powerpc/powerpc.exp: Run new tests.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/testsuite/
* ld-powerpc/apuinfo.rd: Update for VLE.
* ld-powerpc/vle-reloc-1.d: New.
* ld-powerpc/vle-reloc-1.s: New.
* ld-powerpc/vle-reloc-2.d: New.
* ld-powerpc/vle-reloc-2.s: New.
* ld-powerpc/vle-reloc-3.d: New.
* ld-powerpc/vle-reloc-3.s: New.
* ld-powerpc/vle-reloc-def-1.s: New.
* ld-powerpc/vle-reloc-def-2.s: New.
* ld-powerpc/vle-reloc-def-3.s: New.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
opcodes/
* ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
(PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
(vle_opcd_indices): New array.
(lookup_vle): New function.
(disassemble_init_powerpc): Revise for second (VLE) opcode table.
(print_insn_powerpc): Likewise.
* ppc-opc.c: Likewise.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
Nathan Froyd <froydnj@codesourcery.com>
opcodes/
* ppc-opc.c (insert_arx, extract_arx): New functions.
(insert_ary, extract_ary): New functions.
(insert_li20, extract_li20): New functions.
(insert_rx, extract_rx): New functions.
(insert_ry, extract_ry): New functions.
(insert_sci8, extract_sci8): New functions.
(insert_sci8n, extract_sci8n): New functions.
(insert_sd4h, extract_sd4h): New functions.
(insert_sd4w, extract_sd4w): New functions.
(insert_vlesi, extract_vlesi): New functions.
(insert_vlensi, extract_vlensi): New functions.
(insert_vleui, extract_vleui): New functions.
(insert_vleil, extract_vleil): New functions.
(BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
(BI16, BI32, BO32, B8): New.
(B15, B24, CRD32, CRS): New.
(CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
(DB, IMM20, RD, Rx, ARX, RY, RZ): New.
(ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
(SH6_MASK): Use PPC_OPSHIFT_INV.
(SI8, UI5, OIMM5, UI7, BO16): New.
(VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
(XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
(ALLOW8_SPRG): New.
(insert_sprg, extract_sprg): Check ALLOW8_SPRG.
(OPVUP, OPVUP_MASK OPVUP): New
(BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
(EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
(BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
(BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
(IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
(IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
(SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
(SE_IM5, SE_IM5_MASK): New.
(SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
(EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
(BO32DNZ, BO32DZ): New.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
(PPCVLE): New.
(powerpc_opcodes): Add new VLE instructions. Update existing
instruction to include PPCVLE if supported.
* ppc-dis.c (ppc_opts): Add vle entry.
(get_powerpc_dialect): New function.
(powerpc_init_dialect): VLE support.
(print_insn_big_powerpc): Call get_powerpc_dialect.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Handle negative shift counts.
(print_insn_powerpc): Handle 2-byte instruction lengths.
|
|
(powerpc_opcd_indices): Bump array size.
(disassemble_init_powerpc): Set powerpc_opcd_indices entries
corresponding to unused opcodes to following entry.
(lookup_powerpc): New function, extracted and optimised from..
(print_insn_powerpc): ..here.
|
|
* dis-asm.h (disassemble_init_powerpc): Declare.
opcodes/
* disassemble.c (disassemble_init_for_target): Handle ppc init.
* ppc-dis.c (private): New var.
(powerpc_init_dialect): Don't return calloc failure, instead use
private.
(PPC_OPCD_SEGS, PPC_OP_TO_SEG): Define.
(powerpc_opcd_indices): New array.
(disassemble_init_powerpc): New function.
(print_insn_big_powerpc): Don't init dialect here.
(print_insn_little_powerpc): Likewise.
(print_insn_powerpc): Start search using powerpc_opcd_indices.
|
|
* ppc.h: Add PPC_OPCODE_ALTIVEC2, PPC_OPCODE_E6500, PPC_OPCODE_TMR.
opcodes/
* ppc-dis.c (ppc_opts): Add entries for "e5500" and "e6500".
* ppc-opc.c (insert_ls, TMR, ESYNC, XSYNCLE_MASK): New.
(PPCVEC2, PPCTMR, E6500): New short names.
(powerpc_opcodes): Add vabsdub, vabsduh, vabsduw, dni, mvidsplt,
mviwsplt, icblq., mftmr, mttmr, dcblq., miso, lvexbx, lvexhx,
lvexwx, stvexbx, stvexhx, stvexwx, lvepx, lvepxl, stvepx, stvepxl,
lvtrx, lvtrxl, lvtlx, lvtlxl, stvfrx, stvfrxl, stvflx, stvflxl,
lvswx, lvswxl, stvswx, stvswxl, lvsm mnemonics. Accept LS, ESYNC
optional operands on sync instruction for E6500 target.
bfd/
* archures.c: Add bfd_mach_ppc_e5500 and bfd_mach_ppc_e6500.
* bfd-in2.h: Regenerate.
* cpu-powerpc.c (bfd_powerpc_archs): Add entryies for
bfd_mach_ppc_e5500 and bfd_mach_ppc_e6500.
gas/
* config/tc-ppc.c (md_show_usage): Document -me5500 and -me6500.
(ppc_handle_align): Add termination nop opcode for e500mc family.
* doc/as.texinfo: Document options -me5500 and -me6500.
* doc/c-ppc.texi: Likewise.
gas/testsuite/
* gas/ppc/e500mc64_nop.s: New test case for e500mc family
termination nops.
* gas/ppc/e500mc64_nop.d: Likewise.
* gas/ppc/e5500_nop.s: Likewise.
* gas/ppc/e5500_nop.d: Likewise.
* gas/ppc/e6500_nop.s: Likewise.
* gas/ppc/e6500_nop.d: Likewise.
* gas/ppc/e6500.s: New.
* gas/ppc/e6500.d: Likewise.
* gas/ppc/ppc.exp: Run e6500, e500mc64_nop, e5500_nop, and e6500_nop.
|
|
(valid_bo_pre_v2, valid_bo_post_v2): New functions, extracted from..
(valid_bo): ..here. When disassembling, accept either 'y' or 'at'
type encoding on second pass.
(powerpc_opcodes): Use ISA_V2 to enable branch insns rather than
POWER4.
* ppc-dis.c (print_insn_powerpc): Delete dialect_orig. Instead
ignore deprecated on second pass.
|
|
* config/tc-ppc.c (ppc_set_cpu): Cast PPC_OPCODE_xxx to ppc_cpu_t
before inverting.
binutils/:
* ppc-dis.c (powerpc_init_dialect): Cast PPC_OPCODE_xxx to
ppc_cpu_t before inverting.
|
|
* ppc.h (PPC_OPCODE_32, PPC_OPCODE_BOOKE64, PPC_OPCODE_CLASSIC): Delete.
Renumber other PPC_OPCODE defines.
gas/
* config/tc-ppc.c (ppc_set_cpu): Remove old opcode flags.
(ppc_setup_opcodes): Likewise. Simplify opcode selection.
opcodes/
* ppc-dis.c (ppc_opts, powerpc_init_dialect): Remove old opcode flags.
* ppc-opc.c (PPC32, POWER32, COM32, CLASSIC): Delete.
(PPC64, MFDEC2): Update.
(NON32, NO371): Define.
(powerpc_opcode): Update to not use old opcode flags, and avoid
-m601 duplicates.
|
|
* config/tc-ppc.c (md_assemble): Emit APUinfo section for
PPC_OPCODE_E500.
gas/testsuite/
* gas/ppc/e500.s: Add eieio, mbar and lwsync
* gas/ppc/e500.d: Likewise.
include/opcode/
* ppc.h (PPC_OPCODE_E500): Define.
opcodes/
* ppc-dis.c (ppc_opts): Remove PPC_OPCODE_E500MC from e500 and
e500x2. Add PPC_OPCODE_E500 to e500 and e500x2
* ppc-opc.c (powerpc_opcodes): Deprecate all opcodes on EFS which
touch floating point regs and are enabled by COM, PPC or PPCCOM.
Treat sync as msync on e500. Treat eieio as mbar 1 on e500.
Treat lwsync as msync on e500.
|
|
|
|
* config/tc-ppc.c (md_show_usage): Add -mpwr4, -mpwr5, -mpwr5x,
-mpwr6 and -mpwr7.
opcodes/
* ppc-dis.c (ppc_opts): Add "pwr4", "pwr5", "pwr5x", "pwr6"
and "pwr7". Move "a2" into alphabetical order.
|
|
* opcode/ppc.h (PPC_OPCODE_TITAN): Define.
bfd/
* archures.c (bfd_mach_ppc_titan): Define.
* bfd-in2.h: Regenerate.
* cpu-powerpc.c (bfd_powerpc_archs): Add titan entry.
opcodes/
* ppc-dis.c (ppc_opts): Add titan entry.
* ppc-opc.c (TITAN, MULHW): Define.
(powerpc_opcodes): Support AppliedMicro Titan core (APM83xxx).
gas/
* config/tc-ppc.c (md_show_usage): Mention -mtitan. Don't use tabs.
(ppc_mach): Handle titan.
* doc/c-ppc.texi: Mention -mtitan.
gas/testsuite/
* gas/ppc/titan.d, * gas/ppc/titan.s: New test.
* gas/ppc/ppc.exp: Run it.
|
|
* archures.c: Add bfd_mach_ppc_e500mc64.
* bfd-in2.h: Regenerate.
* cpu-powerpc.c (bfd_powerpc_archs): Add entry for
bfd_mach_ppc_e500mc64.
gas/
* config/tc-ppc.c (md_show_usage): Document -me500mc64.
opcodes/
* ppc-dis.c (ppc_opts): Add entry for "e500mc64".
|
|
* config/tc-ppc.c (md_show_usage): Document -m476.
* doc/c-ppc.texi (PowerPC-Opts): Document -m476.
gas/testsuite/
* gas/ppc/476.s: New test.
* gas/ppc/476.d: Likewise.
* gas/ppc/ppc.exp: Run the 476 test.
include/opcode/
* ppc.h (PPC_OPCODE_476): Define.
opcodes/
* ppc-dis.c (ppc_opts): Add "476" entry.
* ppc-opc.c (PPC476): Define.
(powerpc_opcodes): Update mnemonics where required for 476.
|
|
* config/tc-ppc.c (md_show_usage): Rename "ppca2" to "a2".
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
gas/testsuite/
* gas/ppc/a2.d: Rename "ppca2" to "a2".
include/opcode/
* ppc.h (PPC_OPCODE_A2): Rename from PPC_OPCODE_PPCA2.
opcodes/
* ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
* ppc-dis.c (ppc_opts): Likewise.
Rename "ppca2" to "a2".
|
|
* config/tc-ppc.c (md_show_usage): Document -mpcca2.
* doc/c-ppc.texi (PowerPC-Opts): Document -mppca2.
gas/testsuite/
* gas/ppc/a2.s: New.
* gas/ppc/a2.d: Likewise.
* gas/ppc/ppc.exp: Run the a2 dump test.
include/opcode/
* ppc.h (PPC_OPCODE_PPCA2): New.
opcodes/
* ppc-dis.c (ppc_opts): Add "ppca2" entry.
* ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
ici mnemonics.
(ERAT_T): New operand.
(XWC_MASK): New mask.
(XOPL2): New macro.
(PPCA2): Define.
|
|
* ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
due to -many/-Many.
(print_insn_powerpc): Make sure we only deprecate instructions using
the original dialect and not a modified dialect due to -Many handling.
Move the handling of the condition register and default operands to
the end of the if/else if/else chain.
* ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
instructions from newer processors are listed before older ones.
<"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
that have instructions with conflicting opcodes.
|
|
* ppc.h (ppc_parse_cpu): Declare.
opcodes/
* ppc-dis.c: Include "opintl.h".
(struct ppc_mopt, ppc_opts): New.
(ppc_parse_cpu): New function.
(powerpc_init_dialect): Use it.
(print_ppc_disassembler_options): Dump options from ppc_opts.
Internationalize message.
gas/
* config/tc-ppc.c (parse_cpu): Delete.
(md_parse_option, ppc_machine): Use ppc_parse_cpu.
gas/testsuite/
* gas/ppc/altivec_and_spe.d (objdump): Add -Maltivec.
* gas/ppc/common.d: Adjust for -Mcom not including -Mppc.
|
|
* config/tc-ppc.c (pre_defined_registers): Add "f32" to "f63",
"f.32" to "f.63", "vs0" to "vs63" and "vs.0" to "vs.63".
(parse_cpu): Extend -mpower7 to accept power7 and isel instructions.
gas/testsuite/
* gas/ppc/e500mc.d ("wait", "waitsrv", "waitimpl"): Add tests.
* gas/ppc/e500mc.s: Likewise.
* gas/ppc/power6.d ("cdtbcd", "cbcdtd", "addg6s"): Add tests.
* gas/ppc/power6.s: Likewise.
* gas/ppc/power7.d ("lfdpx", "mffgpr", "mftgpr"): Remove invalid tests.
("wait", "waitsrv", "waitimpl", "divwe", "divwe.", "divweo", "divweo.",
"divweu", "divweu.", "divweuo", "divweuo.", "bpermd", "popcntw",
"popcntd", "ldbrx", "stdbrx", "lfiwzx", "lfiwzx", "fcfids", "fcfids.",
"fcfidus", "fcfidus.", "fctiwu", "fctiwu.", "fctiwuz", "fctiwuz.",
"fctidu", "fctidu.", "fctiduz", "fctiduz.", "fcfidu", "fcfidu.",
"ftdiv", "ftdiv", "ftsqrt", "ftsqrt", "dcbtt", "dcbtstt", "dcffix",
"dcffix.", "lbarx", "lbarx", "lbarx", "lharx", "lharx", "lharx",
"stbcx.", "sthcx.", "fre", "fre.", "fres", "fres.", "frsqrte",
"frsqrte.", "frsqrtes", "frsqrtes.", "isel"): Add tests.
* gas/ppc/power7.s: Likewise.
* gas/ppc/vsx.d: New test.
* gas/ppc/vsx.s: Likewise.
* gas/ppc/ppc.exp: Run it.
include/opcode/
* ppc.h (PPC_OPCODE_POWER7): New.
opcodes/
* ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
the power7 and the isel instructions.
* ppc-opc.c (insert_xc6, extract_xc6): New static functions.
(insert_dm, extract_dm): Likewise.
(XB6): Update comment to include XX2 form.
(WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
(RemoveXX3DM): Delete.
(powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
"mftgpr">: Deprecate for POWER7.
<"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
"frsqrte.">: Deprecate the three operand form and enable the two
operand form for POWER7 and later.
<"wait">: Extend to accept optional parameter. Enable for POWER7.
<"waitsrv", "waitimpl">: Add extended opcodes.
<"ldbrx", "stdbrx">: Enable for POWER7.
<"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
<"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
"divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
"divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
"divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
"fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
"fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
"lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
<"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
"stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
"xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
"xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
"xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
"xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
"xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
"xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
"xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
"xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
"xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
"xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
"xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
"xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
"xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
"xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
"xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
"xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
"xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
"xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
"xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
"xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
"xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
"xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
"xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
"xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
"xxspltw", "xxswapd">: Add VSX opcodes.
|
|
* ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
* ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
operand form and enable the four operand form for POWER6 and later.
<mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
three operand form for POWER6 and later.
gas/testsuite/
* gas/ppc/power6.s ("mtfsf", "mtfsf.", "mtfsfi", "mtfsfi."): Add tests.
* gas/ppc/power6.d: Likewise.
|
|
* ppc-dis.c (powerpc_init_dialect): Do not set PPC_OPCODE_BOOKE
for -Mbooke.
(print_ppc_disassembler_options): Update usage.
* ppc-opc.c (DE, DES, DEO, DE_MASK): Remove.
(BOOKE64): Remove.
(PPCCHLK64): Likewise.
(powerpc_opcodes): Remove all BOOKE64 instructions.
gas/
* config/tc-ppc.c (parse_cpu): Remove booke64 support. Update
usage strings.
(ppc_setup_opcodes): Likewise, remove booke64 support.
* doc/c-ppc.texi (PowerPC-Opts): Remove -mbooke32 and -mbooke64.
* doc/as.texinfo (Overview): Likewise.
binutils/
* doc/binutils.texi (objdump): Update booke documentation.
* NEWS: Document user-visible changes to command line options.
|
|
* config/tc-ppc.c (parse_cpu): Rename altivec_or_spe to retain_flags.
Handle -mvsx and -mpower7.
(md_show_usage): Document -mpower7 and -mvsx.
* doc/as.texinfo (Target PowerPC): Document -mvsx.
* doc/c-ppc.texi (PowerPC-Opts): Document -mvsx and -mpower7.
gas/testsuite/
* gas/ppc/power7.d: New.
* gas/ppc/power7.s: Likewise.
* gas/ppc/ppc.exp: Run power7 test.
include/opcode/
* ppc.h (PPC_OPCODE_VSX, PPC_OPERAND_VSR): New.
opcodes/
* ppc-dis.c (powerpc_init_dialect): Handle power7 and vsx options.
(print_insn_powerpc): Prepend 'vs' when printing VSX registers.
(print_ppc_disassembler_options): Document -Mpower7 and -Mvsx.
* ppc-opc.c (insert_xt6): New static function.
(extract_xt6): Likewise.
(insert_xa6): Likewise.
(extract_xa6: Likewise.
(insert_xb6): Likewise.
(extract_xb6): Likewise.
(insert_xb6s): Likewise.
(extract_xb6s): Likewise.
(XS6, XT6, XA6, XB6, XB6S, DM, XX3, XX3DM, XX1_MASK, XX3_MASK,
XX3DM_MASK, PPCVSX): New.
(powerpc_opcodes): Add opcodes "lxvd2x", "lxvd2ux", "stxvd2x",
"stxvd2ux", "xxmrghd", "xxmrgld", "xxpermdi", "xvmovdp", "xvcpsgndp".
|
|
* ppc.h (PPC_OPCODE_405): Define.
(PPC_OPERAND_FSL, PPC_OPERAND_FCR, PPC_OPERAND_UDI): Define.
gas/
* config/tc-ppc.c (parse_cpu): Separate handling of -m403/405.
(md_show_usage): Likewise.
opcodes/
* ppc-dis.c (print_insn_powerpc): Disassemble FSL/FCR/UDI fields.
* ppc-opc.c (powerpc_operands): Add Xilinx APU related operands.
(insert_sprg, PPC405): Use PPC_OPCODE_405.
(powerpc_opcodes): Add Xilinx APU related opcodes.
|
|
* config/tc-ppc.c (parse_cpu): Handle -m464.
(md_show_usage): Likewise.
opcodes/
* ppc-dis.c (powerpc_init_dialect): Handle -M464.
(print_ppc_disassembler_options): Likewise.
* ppc-opc.c (PPC464): Define.
(powerpc_opcodes): Add mfdcrux and mtdcrux.
|
|
* ppc.h (ppc_cpu_t): New typedef.
(struct powerpc_opcode <flags>): Use it.
(struct powerpc_operand <insert, extract>): Likewise.
(struct powerpc_macro <flags>): Likewise.
gas/
* config/tc-ppc.c (ppc_cpu): Use ppc_cpu_t typedef.
(ppc_insert_operand): Likewise.
(ppc_machine): Likewise.
* config/tc-ppc.h: #include "opcode/ppc.h"
(struct _ppc_fix_extra <ppc_cpu>): Use ppc_cpu_t typedef.
(ppc_cpu): Update extern decl.
opcodes/
* ppc-dis.c (print_insn_powerpc): Update prototye to use new
ppc_cpu_t typedef.
(struct dis_private): New.
(POWERPC_DIALECT): New define.
(powerpc_dialect): Renamed to...
(powerpc_init_dialect): This. Update to use ppc_cpu_t and
struct dis_private.
(print_insn_big_powerpc): Update for using structure in
info->private_data.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Change type of dialect param to ppc_cpu_t.
(skip_optional_operands): Likewise.
(print_insn_powerpc): Likewise. Remove initialization of dialect.
* ppc-opc.c (extract_bat, extract_bba, extract_bdm, extract_bdp,
extract_bo, extract_boe, extract_fxm, extract_mb6, extract_mbe,
extract_nb, extract_nsi, extract_rbs, extract_sh6, extract_spr,
extract_sprg, extract_tbr insert_bat, insert_bba, insert_bdm,
insert_bdp, insert_bo, insert_boe, insert_fxm, insert_mb6, insert_mbe,
insert_nsi, insert_ral, insert_ram, insert_raq, insert_ras, insert_rbs,
insert_sh6, insert_spr, insert_sprg, insert_tbr): Change the dialect
param to be of type ppc_cpu_t. Update prototype.
|
|
|
|
* doc/binutils.texi (objdump): Document -Mppcps.
gas/
* config/tc-ppc.c (parse_cpu): Handle "750cl".
(pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
(md_show_usage): Document -m750cl.
(md_assemble): Handle two delimiters in succession (eg. `),').
* doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
* testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
* testsuite/gas/ppc/ppc750ps.s: New file.
* testsuite/gas/ppc/ppc750ps.d: Likewise.
include/opcode/
* ppc.h (PPC_OPCODE_PPCPS): New.
opcodes/
* ppc-opc.c (PSW, PSWM, PSQ, PSQM, PSD, MTMSRD_L): New.
(XOPS, XOPS_MASK, XW, XW_MASK): Likewise.
(PPCPS): Likewise.
(powerpc_opcodes): Add all pair singles instructions.
* ppc-dis.c (powerpc_dialect): Handle "ppcps".
(print_ppc_disassembler_options): Document -Mppcps.
|
|
|
|
after setting skip_optional.
|
|
(print_insn_powerpc): Use the new operand_value_powerpc and
skip_optional_operands functions to omit or print all optional
operands as a group.
* ppc-opc.c (BFF, W, XFL_L, XWRA_MASK): New.
(XFL_MASK): Delete L and W bits from the mask.
(mtfsfi, mtfsfi.): Replace use of BF with BFF. Relpace use of XRA_MASK
with XWRA_MASK. Use W.
(mtfsf, mtfsf.): Use XFL_L and W.
|
|
* ppc.h (struct powerpc_operand): Replace "bits" with "bitm".
(num_powerpc_operands): Declare.
(PPC_OPERAND_SIGNED et al): Redefine as hex.
(PPC_OPERAND_PLUS1): Define.
opcodes/
* ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
change.
* ppc-opc.c (powerpc_operands): Replace bit count with bit mask
in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
references to following deleted functions.
(insert_bd, extract_bd, insert_dq, extract_dq): Delete.
(insert_ds, extract_ds, insert_de, extract_de): Delete.
(insert_des, extract_des, insert_li, extract_li): Delete.
(insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
(insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
(num_powerpc_operands): New constant.
(XSPRG_MASK): Remove entire SPRG field.
(powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
gas/
* messages.c (as_internal_value_out_of_range): Extend to report
errors for values with invalid low bits set.
* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
fields. Check that operands and opcode fields are disjoint.
(ppc_insert_operand): Check operands using mask rather than bit
count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
insertion code.
(md_apply_fix): Adjust for struct powerpc_operand change.
|
|
* ppc-dis.c (print_ppc_disassembler_options): Note the -M440 can be used.
|
|
|
|
* ppc.h (PPC_OPCODE_POWER6): Define.
Adjust whitespace.
gas/
* config/tc-ppc.c (parse_cpu): Handle "-mpower6".
(md_show_usage): Document it.
(ppc_setup_opcodes): Test power6 opcode flag bits.
* doc/c-ppc.texi (PowerPC-Opts): Document "-mpower6".
opcodes/
* ppc-dis.c (powerpc_dialect): Handle power6 option.
(print_ppc_disassembler_options): Mention power6.
|
|
* elf32-arm.c (elf32_arm_check_relocs): Avoid aliasing warnings from
GCC.
(elf32_arm_size_dynamic_sections): Likewise.
* ecofflink.c (bfd_ecoff_debug_one_external): Likewise.
* elf32-hppa.c (elf32_hppa_check_relocs): Likewise.
* elf32-m32r.c (m32r_elf_check_relocs): Likewise.
* elf32-m68k.c (elf_m68k_check_relocs): Likewise.
* elf32-ppc.c (ppc_elf_check_relocs): Likewise.
* elf32-s390.c (elf_s390_check_relocs): Likewise.
(elf_s390_size_dynamic_sections): Likewise.
* elf32-sh.c (sh_elf_check_relocs): Likewise.
* elf64-ppc.c (ppc64_elf_check_relocs, dec_dynrel_count)
(ppc64_elf_size_dynamic_sections): Likewise.
* elf64-s390.c (elf_s390_check_relocs): Likewise.
(elf_s390_size_dynamic_sections): Likewise.
* elfxx-mips.c (_bfd_mips_elf_finish_dynamic_sections): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_check_relocs): Likewise.
(_bfd_sparc_elf_size_dynamic_sections): Likewise.
* ieee.c (ieee_slurp_section_data): Likewise.
* oasys.c (oasys_slurp_section_data): Likewise.
opcodes/
* ppc-dis.c (struct dis_private): Remove.
(powerpc_dialect): Avoid aliasing warnings.
(print_insn_big_powerpc, print_insn_little_powerpc): Likewise.
|
|
* config/tc-ppc.c (parse_cpu): Add -me300 support.
(md_show_usage): Likewise.
* doc/c-ppc.texi (PowerPC-Opts): Document it.
include/opcode/
* ppc.h (PPC_OPCODE_E300): Define.
opcodes/
* ppc-dis.c (powerpc_dialect): Handle e300.
(print_ppc_disassembler_options): Likewise.
* ppc-opc.c (PPCE300): Define.
(powerpc_opcodes): Mark icbt as available for the e300.
binutils/
* doc/binutils.texi (objdump): Document -M e300.
|
|
bfd:
* elf32-xtensa.c (vsprint_msg): Add format attribute. Fix
format bugs.
* vms.h (_bfd_vms_debug): Add format attribute.
(_bfd_vms_debug, _bfd_hexdump): Fix typos.
binutils:
* bucomm.h (report): Add format attribute.
* dlltool.c (inform): Likewise.
* dllwrap.c (display, inform, warn): Likewise.
* objdump.c (objdump_sprintf): Likewise.
* readelf.c (error, warn): Likewise. Fix format bugs.
gas:
* config/tc-tic30.c (debug): Add format attribute. Fix format
bugs.
include:
* dis-asm.h (fprintf_ftype): Add format attribute.
opcodes:
* arc-dis.c, arm-dis.c, cris-dis.c, crx-dis.c, d10v-dis.c,
d30v-dis.c, fr30-dis.c, h8300-dis.c, h8500-dis.c, i860-dis.c,
ia64-dis.c, ip2k-dis.c, m10200-dis.c, m10300-dis.c,
m88k-dis.c, mcore-dis.c, mips-dis.c, ms1-dis.c, or32-dis.c,
ppc-dis.c, sh64-dis.c, sparc-dis.c, tic4x-dis.c, tic80-dis.c,
v850-dis.c: Fix format bugs.
* ia64-gen.c (fail, warn): Add format attribute.
* or32-opc.c (debug): Likewise.
|
