aboutsummaryrefslogtreecommitdiff
path: root/opcodes/ppc-dis.c
AgeCommit message (Collapse)AuthorFilesLines
2024-02-09PowerPC: Add support for Power11 optionsPeter Bergner1-1/+11
binutils/ * doc/binutils.texi (PowerPC -M option): Mention power11 and pwr11. gas/ * config/tc-ppc.c: (md_show_usage): Mention -mpower11 and -mpwr11. * doc/c-ppc.texi: Likewise. opcodes/ * ppc-dis.c (ppc_opts): Add "power11" and "pwr11" entries. (powerpc_init_dialect): Default to "power11".
2024-01-04Update year range in copyright notice of binutils filesAlan Modra1-1/+1
Adds two new external authors to etc/update-copyright.py to cover bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then updates copyright messages as follows: 1) Update cgen/utils.scm emitted copyrights. 2) Run "etc/update-copyright.py --this-year" with an extra external author I haven't committed, 'Kalray SA.', to cover gas testsuite files (which should have their copyright message removed). 3) Build with --enable-maintainer-mode --enable-cgen-maint=yes. 4) Check out */po/*.pot which we don't update frequently.
2023-11-21[opcodes] ARC + PPC: Fix -Walloc-size warningsJan-Benedict Glaw1-1/+1
Recently, -Walloc-size warnings started to kick in. Fix these two calloc() calls to match the intended usage pattern. opcodes/ChangeLog: * arc-dis.c (init_arc_disasm_info): Fix calloc() call. * ppc-dis.c (powerpc_init_dialect): Ditto.
2023-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The newer update-copyright.py fixes file encoding too, removing cr/lf on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
2022-10-27PowerPC: Add support for RFC02653 - Dense Math FacilityPeter Bergner1-0/+3
gas/ * config/tc-ppc.c (pre_defined_registers): Add dense math registers. (md_assemble): Check dmr specified in correct operand. * testsuite/gas/ppc/outerprod.s <dmsetaccz, dmxvbf16ger2, dmxvbf16ger2nn, dmxvbf16ger2np, dmxvbf16ger2pn, dmxvbf16ger2pp, dmxvf16ger2, dmxvf16ger2nn, dmxvf16ger2np, dmxvf16ger2pn, dmxvf16ger2pp, dmxvf32ger, dmxvf32gernn, dmxvf32gernp, dmxvf32gerpn, dmxvf32gerpp, dmxvf64ger, dmxvf64gernn, dmxvf64gernp, dmxvf64gerpn, dmxvf64gerpp, dmxvi16ger2, dmxvi16ger2pp, dmxvi16ger2s, dmxvi16ger2spp, dmxvi4ger8, dmxvi4ger8pp, dmxvi8ger4, dmxvi8ger4pp, dmxvi8ger4spp, dmxxmfacc, dmxxmtacc, pmdmxvbf16ger2, pmdmxvbf16ger2nn, pmdmxvbf16ger2np, pmdmxvbf16ger2pn, pmdmxvbf16ger2pp, pmdmxvf16ger2, pmdmxvf16ger2nn, pmdmxvf16ger2np, pmdmxvf16ger2pn, pmdmxvf16ger2pp, pmdmxvf32ger, pmdmxvf32gernn, pmdmxvf32gernp, pmdmxvf32gerpn, pmdmxvf32gerpp, pmdmxvf64ger, pmdmxvf64gernn, pmdmxvf64gernp, pmdmxvf64gerpn, pmdmxvf64gerpp, pmdmxvi16ger2, pmdmxvi16ger2pp, pmdmxvi16ger2s, pmdmxvi16ger2spp, pmdmxvi4ger8, pmdmxvi4ger8pp, pmdmxvi8ger4, pmdmxvi8ger4pp, pmdmxvi8ger4spp>: Add new tests. * testsuite/gas/ppc/outerprod.d: Likewise. * testsuite/gas/ppc/rfc02653.s: New test. * testsuite/gas/ppc/rfc02653.d: Likewise. * testsuite/gas/ppc/ppc.exp: Run it. include/ * opcode/ppc.h (PPC_OPERAND_DMR): Define. Renumber following PPC_OPERAND defines. opcodes/ * ppc-dis.c (print_insn_powerpc): Prepend 'dm' when printing DMR regs. * ppc-opc.c (insert_p2, (extract_p2, (insert_xa5, (extract_xa5, insert_xb5, (extract_xb5): New functions. (insert_xa6a, extract_xa6a, insert_xb6a, extract_xb6a): Disallow operand overlap only on Power10. (DMR, DMRAB, P1, P2, XA5p, XB5p, XDMR_MASK, XDMRDMR_MASK, XX2ACC_MASK, XX2DMR_MASK, XX3DMR_MASK): New defines. (powerpc_opcodes): Add dmmr, dmsetaccz, dmsetdmrz, dmxor, dmxvbf16ger2, dmxvbf16ger2nn, dmxvbf16ger2np, dmxvbf16ger2pn, dmxvbf16ger2pp, dmxvf16ger2, dmxvf16ger2nn, dmxvf16ger2np, dmxvf16ger2pn, dmxvf16ger2pp, dmxvf32ger, dmxvf32gernn, dmxvf32gernp, dmxvf32gerpn, dmxvf32gerpp, dmxvf64ger, dmxvf64gernn, dmxvf64gernp, dmxvf64gerpn, dmxvf64gerpp, dmxvi16ger2, dmxvi16ger2pp, dmxvi16ger2s, dmxvi16ger2spp, dmxvi4ger8, dmxvi4ger8pp, dmxvi8ger4, dmxvi8ger4pp, dmxvi8ger4spp, dmxxextfdmr256, dmxxextfdmr512, dmxxinstdmr256, dmxxinstdmr512, dmxxmfacc, dmxxmtacc, pmdmxvbf16ger2, pmdmxvbf16ger2nn, pmdmxvbf16ger2np, pmdmxvbf16ger2pn, pmdmxvbf16ger2pp, pmdmxvf16ger2, pmdmxvf16ger2nn, pmdmxvf16ger2np, pmdmxvf16ger2pn, pmdmxvf16ger2pp, pmdmxvf32ger, pmdmxvf32gernn, pmdmxvf32gernp, pmdmxvf32gerpn, pmdmxvf32gerpp, pmdmxvf64ger, pmdmxvf64gernn, pmdmxvf64gernp, pmdmxvf64gerpn, pmdmxvf64gerpp, pmdmxvi16ger2, pmdmxvi16ger2pp, pmdmxvi16ger2s, pmdmxvi16ger2spp, pmdmxvi4ger8, pmdmxvi4ger8pp, pmdmxvi8ger4, pmdmxvi8ger4pp, pmdmxvi8ger4spp.
2022-10-16PowerPC se_rfmci and VLE, SPE2 and LSP insns with -manyAlan Modra1-0/+4
I noticed recently that se_rfmci, a VLE mode instruction, was being accepted by non-VLE cpus, and also that se_rfmci by itself in a section did not cause SHF_PPC_VLE to be set. ie. both testcases added by this patch fail without the changes to tc-ppc.c here. Also, VLE, SPE2 and LSP insns were not accepted by the assembler with -many nor were SPE2 and LSP being disassembled with -Many. gas/ * config/tc-ppc.c (ppc_setup_opcodes): Wrap long lines. Add vle_opcodes when PPC_OPCODE_VLE or PPC_OPCODE_ANY. Simplify disassembler index segment checks. Add LSP and SPE2 opcodes when PPC_OPCODE_ANY too. (md_assemble): Correct logic adding PPC_APUINFO_VLE and SHF_PPC_VLE. * testsuite/gas/ppc/se_rfmci.s * testsuite/gas/ppc/se_rfmci.d, * testsuite/gas/ppc/se_rfmci_bad.d: New tests. * testsuite/gas/ppc/ppc.exp: Run them. opcodes/ * ppc-dis.c (print_insn_powerpc): Disassemble SPE2 and LSP insn when -Many. * ppc-opc.c (vle_opcodes <se_rfmci>): Comment.
2022-10-14e200 LSP supportAlan Modra1-5/+79
It has bothered me for a long time that we have disabled LSP (and SPE) tests. Also the LSP test comment indicating there is something wrong with get_powerpc_dialect. I don't think there is. Decoding of a VLE instruction depends on whether the processor is in VLE mode (some processors support both VLE and standard PPC) which we flag per section with SHF_PPC_VLE for decoding when disassembling. Background: Some versions of powerpc e200 have "Lightweight Signal Processing" support, examples being e200z215 and e200z425. As far as I can tell, LSP and SPE are mutually exclusive. This seems to be borne out by insn encoding, for example LSP "zvaddih" and SPE "evaddw" have the same encoding. So none of the processor descriptions in ppc_opts ought to have both PPC_OPCODE_LSP and PPC_OPCODE_SPE/2, if we want disassembly to work. I also could not find anything to suggest that the LSP insns are enabled only in VLE mode, which means the LSP insns should not be in vle_opcodes. Fix all this by moving the LSP insns to their own table, and add a new e200z2 cpu entry with LSP support, removing LSP from -me200z4 and from -mvle. (Yes, I know, as I said above some of the e200z4 processors have LSP. Others have SPE. It's hard to choose good options. Think of z2 as meaning earlier, z4 as later.) Also add -mlsp to allow adding the LSP insn set. include/ * opcode/ppc.h (lsp_opcodes, lsp_num_opcodes): Declare. (LSP_OP_TO_SEG): Define. binutils/ * doc/binutils.texi: Update ppc docs. gas/ * config/tc-ppc.c (ppc_setup_opcodes): Add lsp opcodes to ppc_hash. * doc/c-ppc.texi: Document e200 and lsp. * testsuite/gas/ppc/lsp-checks.d: Assemble with -me200z2. * testsuite/gas/ppc/lsp.d: Likewise, disassembly too. * testsuite/gas/ppc/ppc.exp: Don't xfail lsp test. opcodes/ * ppc-dis.c (ppc_opts): Add e200z2 and lsp. Don't set PPC_OPCODE_LSP for e200z4 or vle. (ppc_parse_cpu): Mutually exclude LSP and SPE. (LSP_OPCD_SEGS): Define. (lsp_opcd_indices): New array. (disassemble_init_powerpc): Init lsp_opcd_indices. (lookup_lsp): New function. (print_insn_powerpc): Call it. * ppc-opc.c: Include libiberty.h for ARRAY_SIZE and use throughout. (vle_opcodes): Move LSP opcodes to.. (lsp_opcodes): ..here, and sort. (lsp_num_opcodes): New.
2022-09-12ppc: Document the -mfuture and -Mfuture options and make them usablePeter Bergner1-1/+2
The -mfuture and -Mfuture options which are used for adding potential new ISA instructions were not documented. They also lacked a bitmask so new instructions could not be enabled by those options. Fixed. binutils/ * doc/binutils.texi: Document -Mfuture. gas/ * config/tc-ppc.c: Document -mfuture * doc/c-ppc.texi: Likewise. include/ * opcode/ppc.h (PPC_OPCODE_FUTURE): Define. opcodes/ * ppc-dis.c (ppc_opts) <future>: Use it. * ppc-opc.c (FUTURE): Define.
2022-08-11ppc/svp64: introduce non-zero operand flagDmitry Selyutin1-0/+3
svstep and svshape instructions subtract 1 before encoding some of the operands. Obviously zero is not supported for these operands. Whilst PPC_OPERAND_PLUS1 fits perfectly to mark that maximal value should be incremented, there is no flag which marks the fact that zero values are not allowed. This patch adds a new flag, PPC_OPERAND_NONZERO, for this purpose.
2022-08-11ppc/svp64: support LibreSOC architectureDmitry Selyutin1-0/+5
This patch adds support for LibreSOC machine and SVP64 extension flag for PowerPC architecture. SV (Simple-V) is a strict RISC-paradigm Scalable Vector Extension for the Power ISA. SVP64 is the 64-bit Prefixed instruction format implementing SV. Funded by NLnet through EU Grants No: 825310 and 825322, SV is in DRAFT form and is to be publicly submitted via the OpenPOWER Foundation ISA Working Group via the newly-created External RFC Process. For more details, visit https://libre-soc.org.
2022-07-25libopcodes/ppc: add support for disassembler stylingAndrew Burgess1-30/+85
This commit adds disassembler styling to the libopcodes ppc disassembler. This conversion was pretty straight forward, I just converted the fprintf_func calls to fprintf_styled_func calls and added an appropriate style. For testing the new styling I just assembled then disassembled the source files in gas/testsuite/gas/ppc and manually checked that the styling looked reasonable. I think the only slightly weird case was how things like '4*cr1+eq' are styled. As best I can tell, this construct, used for example in this instruction: crand 4*cr1+lt,4*cr1+gt,4*cr1+eq is used to access a field of a control register. I initially tried styling this whole construct as a register[1], but during review it was suggested that instead different parts of the text should have different styles. In this commit I propose styling '4*cr1+lt' like this: 4 - immediate, * - text, cr1 - register + - text lt - sub-mnemonic If the user does not request styled output from objdump, then there should be no change in the disassembler output after this commit. [1] https://sourceware.org/pipermail/binutils/2022-July/121771.html
2022-05-25ppc: extend opindex to 16 bitsDmitry Selyutin1-6/+6
With the upcoming SVP64 extension[0] to PowerPC architecture, it became evident that PowerPC operand indices no longer fit 8 bits. This patch switches the underlying type to uint16_t, also introducing a special typedef so that any future extension goes even smoother. [0] https://libre-soc.org include/ * opcode/ppc.h (ppc_opindex_t): New typedef. (struct powerpc_opcode): Use it. (PPC_OPINDEX_MAX): Define. gas/ * write.h (struct fix): Increase size of fx_pcrel_adjust. Reorganise. * config/tc-ppc.c (insn_validate): Use ppc_opindex_t for operands. (md_assemble): Likewise. (md_apply_fix): Likewise. Mask fx_pcrel_adjust with PPC_OPINDEX_MAX. (ppc_setup_opcodes): Adjust opcode index assertion. opcodes/ * ppc-dis.c (skip_optional_operands): Use ppc_opindex_t for operand pointer. (lookup_powerpc, lookup_prefix, lookup_vle, lookup_spe2): Likewise. (print_insn_powerpc): Likewise.
2022-03-14PR28959, obdump doesn't disassemble mftb instructionAlan Modra1-2/+3
Without a -M cpu option given, powerpc objdump defaults currently to -Mpower10 but -Many is also given. Commit 1ff6a3b8e562 regressed -Many disassembly of instructions that are encoded differently depending on cpu, such as mftb which has pre- and post-power4 encodings. PR 28959 * ppc-dis.c (lookup_powerpc): Revert 2021-05-28 change. Instead only look at deprecated PPC_OPCODE_RAW bit when -Many.
2022-01-02Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The result of running etc/update-copyright.py --this-year, fixing all the files whose mode is changed by the script, plus a build with --enable-maintainer-mode --enable-cgen-maint=yes, then checking out */po/*.pot which we don't update frequently. The copy of cgen was with commit d1dd5fcc38ead reverted as that commit breaks building of bfp opcodes files.
2021-05-29PowerPC table driven -Mraw disassemblyAlan Modra1-30/+18
opcodes/ * ppc-dis.c (lookup_powerpc): Test deprecated field when -Many. Don't special case PPC_OPCODE_RAW. (lookup_prefix): Likewise. (lookup_vle, lookup_spe2): Similarly. Add dialect parameter and.. (print_insn_powerpc): ..update caller. * ppc-opc.c (EXT): Define. (powerpc_opcodes): Mark extended mnemonics with EXT. (prefix_opcodes, vle_opcodes): Likewise. (XISEL, XISEL_MASK): Add cr field and simplify. (powerpc_opcodes): Use XISEL with extended isel mnemonics and sort all isel variants to where the base mnemonic belongs. Sort dstt, dststt and dssall. gas/ * testsuite/gas/ppc/raw.s, * testsuite/gas/ppc/raw.d: New test. * testsuite/gas/ppc/ppc.exp: Run it.
2021-04-09PowerPC disassembly of pcrel referencesAlan Modra1-10/+131
This adds some annotation to Power10 pcrel instructions, displaying the target address (ie. pc + D34 field) plus a symbol if there is one at exactly that target address. pld from the .got or .plt will also look up the entry and display it, symbolically if there is a dynamic relocation on the entry. include/ * dis-asm.h (struct disassemble_info): Add dynrelbuf and dynrelcount. binutils/ * objdump.c (struct objdump_disasm_info): Delete dynrelbuf and dynrelcount. (find_symbol_for_address): Adjust for dynrelbuf and dynrelcount move. (disassemble_section, disassemble_data): Likewise. opcodes/ * ppc-dis.c (struct dis_private): Add "special". (POWERPC_DIALECT): Delete. Replace uses with.. (private_data): ..this. New inline function. (disassemble_init_powerpc): Init "special" names. (skip_optional_operands): Add is_pcrel arg, set when detecting R field of prefix instructions. (bsearch_reloc, print_got_plt): New functions. (print_insn_powerpc): For pcrel instructions, print target address and symbol if known, and decode plt and got loads too. gas/ * testsuite/gas/ppc/prefix-pcrel.d: Update expected output. * testsuite/gas/ppc/prefix-reloc.d: Likewise. * gas/testsuite/gas/ppc/vsx_32byte.d: Likewise. ld/ * testsuite/ld-powerpc/inlinepcrel-1.d: Update expected output. * testsuite/ld-powerpc/inlinepcrel-2.d: Likewise. * testsuite/ld-powerpc/notoc2.d: Likewise. * testsuite/ld-powerpc/notoc3.d: Likewise. * testsuite/ld-powerpc/pcrelopt.d: Likewise. * testsuite/ld-powerpc/startstop.d: Likewise. * testsuite/ld-powerpc/tlsget.d: Likewise. * testsuite/ld-powerpc/tlsget2.d: Likewise. * testsuite/ld-powerpc/tlsld.d: Likewise. * testsuite/ld-powerpc/weak1.d: Likewise. * testsuite/ld-powerpc/weak1so.d: Likewise.
2021-03-31Use bool in opcodesAlan Modra1-11/+11
cpu/ * frv.opc: Replace bfd_boolean with bool, FALSE with false, and TRUE with true throughout. opcodes/ * sysdep.h (POISON_BFD_BOOLEAN): Define. * aarch64-asm-2.c, * aarch64-asm.c, * aarch64-asm.h, * aarch64-dis-2.c, * aarch64-dis.c, * aarch64-dis.h, * aarch64-gen.c, * aarch64-opc.c, * aarch64-opc.h, * arc-dis.c, * arc-dis.h, * arc-fxi.h, * arc-opc.c, * arm-dis.c, * bfin-dis.c, * cris-dis.c, * csky-dis.c, * csky-opc.h, * dis-buf.c, * disassemble.c, * frv-opc.c, * frv-opc.h, * h8300-dis.c, * i386-dis.c, * m68k-dis.c, * metag-dis.c, * microblaze-dis.c, * microblaze-dis.h, * micromips-opc.c, * mips-dis.c, * mips-formats.h, * mips-opc.c, * mips16-opc.c, * mmix-dis.c, * msp430-dis.c, * nds32-dis.c, * nfp-dis.c, * nios2-dis.c, * ppc-dis.c, * riscv-dis.c, * score-dis.c, * score7-dis.c, * tic6x-dis.c, * v850-dis.c, * vax-dis.c, * wasm32-dis.c, * xtensa-dis.c: Replace bfd_boolean with bool, FALSE with false, and TRUE with true throughout.
2021-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2020-09-16Tidy elf_symbol_fromAlan Modra1-1/+1
bfd/ * elf-bfd.h (elf_symbol_from): Remove unused ABFD parameter. * elf.c (ignore_section_sym, _bfd_elf_copy_private_symbol_data), (swap_out_syms): Adjust elf_symbol_from invocation. binutils/ * nm.c (print_symbol): Adjust elf_symbol_from invocation. * objcopy.c (is_hidden_symbol): Likewise. gas/ * config/obj-elf.c (obj_elf_visibility, elf_frob_symbol): Adjust elf_symbol_from invocation. * config/tc-aarch64.c (s_variant_pcs): Likewise. * config/tc-m68hc11.c (s_m68hc11_mark_symbol): Likewise. * config/tc-ppc.c (ppc_elf_localentry, ppc_force_relocation), (ppc_fix_adjustable): Likewise. * config/tc-xgate.c (xgate_frob_symbol): Likewise. ld/ * plugin.c (asymbol_from_plugin_symbol): Adjust elf_symbol_from invocation. opcodes/ * ppc-dis.c (ppc_symbol_is_valid): Adjust elf_symbol_from invocation.
2020-09-10Stop symbols generated by the annobin gcc plugin from breaking the ↵Nick Clifton1-0/+24
disassembly of PowerPC binaries. * ppc-dis.c (ppc_symbol_is_valid): New function. Returns false for hidden, local, no-type symbols. (disassemble_init_powerpc): Point the symbol_is_valid field in the info structure at the new function.
2020-06-06Power10 tidiesAlan Modra1-0/+5
binutils/ * doc/binutils.texi (PowerPC -M option): Mention power10 and pwr10. gas/ * config/tc-ppc.c (md_show_usage): Mention -mpower10 and -mpwr10. * doc/c-ppc.texi: Likewise. opcodes/ * ppc-dis.c (ppc_opts): Accept -mpwr10/-Mpwr10.
2020-05-11Power10 Reduced precision outer product operationsAlan Modra1-0/+2
include/ * opcode/ppc.h (PPC_OPERAND_ACC): Define. Renumber following PPC_OPERAND defines. opcodes/ * ppc-opc.c (insert_xa6a, extract_xa6a, insert_xb6a, extract_xb6a): New functions. (powerpc_operands): Define ACC, PMSK8, PMSK4, PMSK2, XMSK, YMSK, YMSK2, XA6a, XA6ap, XB6a entries. (PMMIRR, P_X_MASK, P_XX1_MASK, P_GER_MASK): Define (P_GER2_MASK, P_GER4_MASK, P_GER8_MASK, P_GER64_MASK): Define. (PPCVSX4): Define. (powerpc_opcodes): Add xxmfacc, xxmtacc, xxsetaccz, xvi8ger4pp, xvi8ger4, xvf16ger2pp, xvf16ger2, xvf32gerpp, xvf32ger, xvi4ger8pp, xvi4ger8, xvi16ger2spp, xvi16ger2s, xvbf16ger2pp, xvbf16ger2, xvf64gerpp, xvf64ger, xvi16ger2, xvf16ger2np, xvf32gernp, xvi8ger4spp, xvi16ger2pp, xvbf16ger2np, xvf64gernp, xvf16ger2pn, xvf32gerpn, xvbf16ger2pn, xvf64gerpn, xvf16ger2nn, xvf32gernn, xvbf16ger2nn, xvf64gernn, xvcvbf16sp, xvcvspbf16. (prefix_opcodes): Add pmxvi8ger4pp, pmxvi8ger4, pmxvf16ger2pp, pmxvf16ger2, pmxvf32gerpp, pmxvf32ger, pmxvi4ger8pp, pmxvi4ger8, pmxvi16ger2spp, pmxvi16ger2s, pmxvbf16ger2pp, pmxvbf16ger2, pmxvf64gerpp, pmxvf64ger, pmxvi16ger2, pmxvf16ger2np, pmxvf32gernp, pmxvi8ger4spp, pmxvi16ger2pp, pmxvbf16ger2np, pmxvf64gernp, pmxvf16ger2pn, pmxvf32gerpn, pmxvbf16ger2pn, pmxvf64gerpn, pmxvf16ger2nn, pmxvf32gernn, pmxvbf16ger2nn, pmxvf64gernn. gas/ * config/tc-ppc.c (pre_defined_registers): Add accumulators. (md_assemble): Check acc specified in correct operand. * testsuite/gas/ppc/outerprod.d, * testsuite/gas/ppc/outerprod.s, * testsuite/gas/ppc/vsx4.d, * testsuite/gas/ppc/vsx4.s: New tests. * testsuite/gas/ppc/ppc.exp: Run them.
2020-05-11PowerPC Default disassembler to -Mpower10Alan Modra1-1/+1
* ppc-dis.c (powerpc_init_dialect): Default to "power10".
2020-05-11PowerPC Rename powerxx to power10Alan Modra1-2/+7
Now that ISA3.1 is out we can finish with the powerxx silliness. bfd/ * elf64-ppc.c: Rename powerxx to power10 throughout. gas/ * config/tc-ppc.c (md_assemble): Update for PPC_OPCODE_POWER10 renaming. * testsuite/gas/ppc/prefix-align.d: Use -mpower10/-Mpower10 in place of -mfuture/-Mfuture. * testsuite/gas/ppc/prefix-pcrel.d: Likewise. * testsuite/gas/ppc/prefix-reloc.d: Likewise. gold/ * powerpc.cc: Rename powerxx to power10 throughout. include/ * elf/ppc64.h: Update comment. * opcode/ppc.h (PPC_OPCODE_POWER10): Rename from PPC_OPCODE_POWERXX. ld/ * testsuite/ld-powerpc/callstub-1.d: Use -mpower10/-Mpower10 in place of -mfuture/-Mfuture. * testsuite/ld-powerpc/notoc2.d: Likewise. * testsuite/ld-powerpc/powerpc.exp: Likewise. * testsuite/ld-powerpc/tlsgd.d: Likewise. * testsuite/ld-powerpc/tlsie.d: Likewise. * testsuite/ld-powerpc/tlsld.d: Likewise. opcodes/ * ppc-dis.c (ppc_opts): Add "power10" entry. (print_insn_powerpc): Update for PPC_OPCODE_POWER10 renaming. * ppc-opc.c (POWER10): Rename from POWERXX. Update all uses.
2020-03-20PowerPC disassembly of odd sized sectionsAlan Modra1-10/+18
We shouldn't really decode a 2-byte left-over at the end of a section as if the section contains two more bytes of zeros. Not that it matters very much, but this patch tidies the corner case. * ppc-dis.c (print_insn_powerpc): Only clear needed bytes of partially filled buffer. Prevent lookup of 4-byte insns when only VLE 2-byte insns are possible due to section size. Print ".word" rather than ".long" for 2-byte leftovers.
2020-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2019-12-23ppc: misc minor build correctionsJan Beulich1-5/+5
Avoid shadowing a libiberty symbol (which oldish gcc warns about by default), and allow building cleanly on 32-bit distros.
2019-12-10Remove backup ppc struct dis_private.Alan Modra1-3/+4
ppc-dis.c used a global struct whenever malloc failed to provide the eight bytes of memory necessary for struct dis_private. Which is quite ridiculous. If that malloc failed there is zero chance some other malloc won't fail too. * ppc-dis.c (private): Delete variable. (get_powerpc_dialect): Don't segfault on NULL info->private_data. (powerpc_init_dialect): Don't use global private.
2019-06-03Don't waste space in prefix_opcd_indicesAlan Modra1-1/+1
* ppc-dis.c (prefix_opcd_indices): Correct size.
2019-05-24PowerPC add initial -mfuture instruction supportPeter Bergner1-1/+92
This patch adds initial 64-bit insn assembler/disassembler support. The only instruction added is "pnop" along with the automatic aligning of prefix instruction so they do not cross 64-byte boundaries. include/ * dis-asm.h (WIDE_OUTPUT): Define. * opcode/ppc.h (prefix_opcodes, prefix_num_opcodes): Declare. (PPC_OPCODE_POWERXX, PPC_GET_PREFIX, PPC_GET_SUFFIX), (PPC_PREFIX_P, PPC_PREFIX_SEG): Define. opcodes/ * ppc-dis.c (ppc_opts): Add "future" entry. (PREFIX_OPCD_SEGS): Define. (prefix_opcd_indices): New array. (disassemble_init_powerpc): Initialize prefix_opcd_indices. (lookup_prefix): New function. (print_insn_powerpc): Handle 64-bit prefix instructions. * ppc-opc.c (PREFIX_OP, PREFIX_FORM, SUFFIX_MASK, PREFIX_MASK), (PMRR, POWERXX): Define. (prefix_opcodes): New instruction table. (prefix_num_opcodes): New constant. binutils/ * objdump.c (disassemble_bytes): Set WIDE_OUTPUT in flags. gas/ * config/tc-ppc.c (ppc_setup_opcodes): Handle prefix_opcodes. (struct insn_label_list): New. (insn_labels, free_insn_labels): New variables. (ppc_record_label, ppc_clear_labels, ppc_start_line_hook): New funcs. (ppc_frob_label, ppc_new_dot_label): Move functions earlier in file and call ppc_record_label. (md_assemble): Handle 64-bit prefix instructions. Align labels that are on the same line as a prefix instruction. * config/tc-ppc.h (tc_frob_label, ppc_frob_label): Move to later in the file. (md_start_line_hook): Define. (ppc_start_line_hook): Declare. * testsuite/gas/ppc/prefix-align.d, * testsuite/gas/ppc/prefix-align.s: New test. * testsuite/gas/ppc/ppc.exp: Run new test.
2019-05-11PowerPC objdump -MrawAlan Modra1-3/+5
* ppc-dis.c (print_insn_powerpc) Don't skip optional operands when -Mraw is in effect.
2019-05-09Update printing of optional operands during disassembly.Peter Bergner1-9/+8
opcodes/ * ppc-dis.c (skip_optional_operands): Change return type and returns. (print_insn_powerpc) <skip_optional>: Change type. Call skip_optional_operands if we have not skipped any operands. gas/ * testsuite/gas/ppc/476.d: Update expected output. * testsuite/gas/ppc/power6.d: Likewise.
2019-04-07print_insn_powerpc tidyAlan Modra1-26/+23
* ppc-dis.c (print_insn_powerpc): Use a tiny state machine op_separator to control printing of spaces, comma and parens rather than need_comma, need_paren and spaces vars.
2019-04-05PowerPC disassembler: Don't emit trailing spacesAlan Modra1-4/+11
When an instruction has operands, the PowerPC disassembler prints spaces after the opcode so as to line up operands. If the operands are all optional and all default value, then no operands are printed, leaving trailing spaces. This patch fixes that. opcodes/ * ppc-dis.c (print_insn_powerpc): Delay printing spaces after opcode until first operand is output. gas/ * testsuite/gas/ppc/476.d: Remove trailing spaces. * testsuite/gas/ppc/a2.d: Likewise. * testsuite/gas/ppc/booke.d: Likewise. * testsuite/gas/ppc/booke_xcoff.d: Likewise. * testsuite/gas/ppc/e500.d: Likewise. * testsuite/gas/ppc/e500mc.d: Likewise. * testsuite/gas/ppc/e6500.d: Likewise. * testsuite/gas/ppc/htm.d: Likewise. * testsuite/gas/ppc/power6.d: Likewise. * testsuite/gas/ppc/power8.d: Likewise. * testsuite/gas/ppc/power9.d: Likewise. * testsuite/gas/ppc/vle.d: Likewise. ld/ * testsuite/ld-powerpc/tlsexe32.d: Remove trailing spaces. * testsuite/ld-powerpc/tlsopt5.d: Likewise. * testsuite/ld-powerpc/tlsopt5_32.d: Likewise.
2019-03-28PR24390, Don't decode mtfsb field as a cr fieldAlan Modra1-1/+3
"mtfsb0 4*cr7+lt" doesn't make all that much sense, but unfortunately glibc uses just that instead of "mtfsb0 28" to clear the fpscr xe bit. So for backwards compatibility accept cr field expressions when assembling mtfsb operands, but disassemble to a plain number. PR 24390 include/ * opcode/ppc.h (PPC_OPERAND_CR_REG): Comment. opcodes/ * ppc-opc.c (BTF): Define. (powerpc_opcodes): Use for mtfsb*. * ppc-dis.c (print_insn_powerpc): Print fields with both PPC_OPERAND_CR_REG and PPC_OPERAND_CR_BIT as a plain number. gas/ * testsuite/gas/ppc/476.d: Update mtfsb*. * testsuite/gas/ppc/a2.d: Likewise.
2019-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2018-12-28PR24028, PPC_INT_FMTAlan Modra1-10/+10
PPC_INT_FMT is redundant now that bfd.h pulls in inttypes.h if available. Apparently MacOS Mojave defines int64_t as long long even though long is also 64 bits, which confuses the logic selecting PPC_INT_FMT (and BFD_PRI64 too). Hopefully inttypes.h is available on Mojave. PR 24028 include/ * opcode/ppc.h (PPC_INT_FMT): Delete. opcodes/ * ppc-dis.c (print_insn_powerpc): Replace PPC_INT_FMT uses with PRId64/PRIx64.
2018-08-21Use operand->extract to provide defaults for optional PowerPC operandsAlan Modra1-6/+13
Most optional operands to powerpc instructions use a default value of zero, but there are a few exceptions. Those have been handled by PPC_OPERAND_OPTIONAL_VALUE and an entry in the powerpc_operands table for the default value, smuggled in the shift field. This patch changes that to using the operand extract function to provide non-zero defaults. I've also moved the code determining whether optional operands are provided or omitted, to the point the first optional operand is seen, and allowed for the possibility of optional base register operands in a future patch. The patch does change the error you get on invalid assembly like ld 3,4 You'll now see "missing operand" rather than "syntax error; end of line, expected `('". gas/ * config/tc-ppc.c (md_assemble): Delay counting of optional operands until one is encountered. Allow for the possibility of optional base regs, ie. PPC_OPERAND_PARENS. Call ppc_optional_operand_value with extra args. include/ * opcode/ppc.h (struct powerpc_operand): Correct "insert" comment. Mention use of "extract" function to provide default value. (PPC_OPERAND_OPTIONAL_VALUE): Delete. (ppc_optional_operand_value): Rewrite to use extract function. opcodes/ * ppc-dis.c (operand_value_powerpc): Init "invalid". (skip_optional_operands): Count optional operands, and update ppc_optional_operand_value call. * ppc-opc.c (extract_dxdn): Remove ATTRIBUTE_UNUSED from used arg. (extract_vlensi): Likewise. (extract_fxm): Return default value for missing optional operand. (extract_ls, extract_raq, extract_tbr): Likewise. (insert_sxl, extract_sxl): New functions. (insert_esync, extract_esync): Remove Power9 handling and simplify. (powerpc_operands <FXM4, TBR>): Delete PPC_OPERAND_OPTIONAL_VALUE flag and extra entry. (powerpc_operands <SXL>): Likewise, and use insert_sxl and extract_sxl.
2018-07-26PowerPC Improve support for Gekko & BroadwayAlex Chadwick1-0/+7
This is a relatively straightforward patch to improve support for the IBM Gekko and IBM Broadway processors. Broadway is functionally equivalent to the IBM 750CL, while Gekko's functionality is a subset of theirs. The patch simplifies this reality and adds -mgekko and -mbroadway as aliases for -m750cl. I didn't feel it was worth wasting a PPC_OPCODE_* bit to differentiate Gekko. The patch adds a number of simplified mnemonics for special purpose register access. Notably, Broadway adds 4 additional IBAT and DBAT registers but these are not assigned sequential SPR numbers. gas/ * config/tc-ppc.c (md_show_usage): Add -mgekko and -mbroadway. * doc/as.texi (Target PowerPC options): Add -mgekko and -mbroadway. * doc/c-ppc.texi (PowerPC-Opts): Likewise. * testsuite/gas/ppc/broadway.d, * testsuite/gas/ppc/broadway.s: New test for broadway. * testsuite/gas/ppc/ppc.exp: Run new test. include/ * opcode/ppc.h (PPC_OPCODE_750): Adjust comment. opcodes/ * ppc-dis.c (ppc_opts): Add -mgekko and -mbroadway. (powerpc_init_dialect): Handle bfd_mach_ppc_750. * ppc-opc.c (insert_sprbat, extract_sprbat): New functions to support disjointed BAT. (powerpc_operands): Allow extra bit in SPRBAT_MASK. Add SPRGQR. (XSPRGQR_MASK, GEKKO, BROADWAY): Define. (powerpc_opcodes): Add 750cl extended mnemonics for spr access.
2018-07-02GDB PR tdep/8282: MIPS: Wire in `set disassembler-options'Maciej W. Rozycki1-6/+12
Implement MIPS target support for passing options to the disassembler, complementing commit 65b48a81404c ("GDB: Add support for the new set/show disassembler-options commands."). This includes options that expect an argument, so adjust the generic code and data structures used so as to handle such options. So as to give backends syntax flexibility no specific delimiter has been defined to separate options from their respective arguments, so it has to be included as the last character of the option name. Completion code however has not been adjusted and consequently option arguments cannot be completed at this time. Also the MIPS target has non-empty defaults for the options, so that ABI names for the general-purpose registers respect our `set mips abi ...' setting rather than always being determined from the ELF headers of the binary file selected. Handle these defaults as implicit options, never shown to the user and always prepended to the user-specified options, so that the latters can override the defaults. The resulting output for the MIPS target is as follows: (gdb) show disassembler-options The current disassembler options are '' The following disassembler options are supported for use with the 'set disassembler-options <option>[,<option>...]' command: no-aliases Use canonical instruction forms. msa Recognize MSA instructions. virt Recognize the virtualization ASE instructions. xpa Recognize the eXtended Physical Address (XPA) ASE instructions. ginv Recognize the Global INValidate (GINV) ASE instructions. gpr-names=ABI Print GPR names according to specified ABI. Default: based on binary being disassembled. fpr-names=ABI Print FPR names according to specified ABI. Default: numeric. cp0-names=ARCH Print CP0 register names according to specified architecture. Default: based on binary being disassembled. hwr-names=ARCH Print HWR names according to specified architecture. Default: based on binary being disassembled. reg-names=ABI Print GPR and FPR names according to specified ABI. reg-names=ARCH Print CP0 register and HWR names according to specified architecture. For the options above, the following values are supported for "ABI": numeric 32 n32 64 For the options above, the following values are supported for "ARCH": numeric r3000 r3900 r4000 r4010 vr4100 vr4111 vr4120 r4300 r4400 r4600 r4650 r5000 vr5400 vr5500 r5900 r6000 rm7000 rm9000 r8000 r10000 r12000 r14000 r16000 mips5 mips32 mips32r2 mips32r3 mips32r5 mips32r6 mips64 mips64r2 mips64r3 mips64r5 mips64r6 interaptiv-mr2 sb1 loongson2e loongson2f loongson3a octeon octeon+ octeon2 octeon3 xlr xlp (gdb) which corresponds to what `objdump --help' used to print for the MIPS target, with minor formatting changes, most notably option argument lists being wrapped, but also the amount of white space separating options from the respective descriptions. The relevant part the new code is now also used by `objdump --help', which means these formatting changes apply to both outputs, except for argument list wrapping, which is GDB-specific. This also adds a separating new line between the heading and option lists where descriptions are provided, hence: (gdb) set architecture s390:31-bit (gdb) show disassembler-options The current disassembler options are '' The following disassembler options are supported for use with the 'set disassembler-options <option>[,<option>...]' command: esa Disassemble in ESA architecture mode zarch Disassemble in z/Architecture mode insnlength Print unknown instructions according to length from first two bits (gdb) but: (gdb) set architecture powerpc:common (gdb) show disassembler-options The current disassembler options are '' The following disassembler options are supported for use with the 'set disassembler-options <option>[,<option>...]' command: 403, 405, 440, 464, 476, 601, 603, 604, 620, 7400, 7410, 7450, 7455, 750cl, 821, 850, 860, a2, altivec, any, booke, booke32, cell, com, e200z4, e300, e500, e500mc, e500mc64, e5500, e6500, e500x2, efs, efs2, power4, power5, power6, power7, power8, power9, ppc, ppc32, 32, ppc64, 64, ppc64bridge, ppcps, pwr, pwr2, pwr4, pwr5, pwr5x, pwr6, pwr7, pwr8, pwr9, pwrx, raw, spe, spe2, titan, vle, vsx (gdb) Existing affected target backends have been adjusted accordingly. This has been verified manually with: (gdb) set architecture arm (gdb) set architecture powerpc:common (gdb) set architecture s390:31-bit to cause no issues with the `show disassembler-options' and `set disassembler-options' commands. A test case for the MIPS target has also been provided, covering the default settings with ABI overrides as well as disassembler option overrides. 2018-07-02 Maciej W. Rozycki <macro@mips.com> Simon Marchi <simon.marchi@polymtl.ca> include/ PR tdep/8282 * dis-asm.h (disasm_option_arg_t): New typedef. (disasm_options_and_args_t): Likewise. (disasm_options_t): Add `arg' member, document members. (disassembler_options_mips): New prototype. (disassembler_options_arm, disassembler_options_powerpc) (disassembler_options_s390): Update prototypes. opcodes/ PR tdep/8282 * mips-dis.c (mips_option_arg_t): New enumeration. (mips_options): New variable. (disassembler_options_mips): New function. (print_mips_disassembler_options): Reimplement in terms of `disassembler_options_mips'. * arm-dis.c (disassembler_options_arm): Adapt to using the `disasm_options_and_args_t' structure. * ppc-dis.c (disassembler_options_powerpc): Likewise. * s390-dis.c (disassembler_options_s390): Likewise. gdb/ PR tdep/8282 * disasm.h (gdb_disassembler): Add `m_disassembler_options_holder'. member * disasm.c (get_all_disassembler_options): New function. (gdb_disassembler::gdb_disassembler): Use it. (gdb_buffered_insn_length_init_dis): Likewise. (gdb_buffered_insn_length): Adjust accordingly. (set_disassembler_options): Handle options with arguments. (show_disassembler_options_sfunc): Likewise. Add a leading new line if showing options with descriptions. (disassembler_options_completer): Adapt to using the `disasm_options_and_args_t' structure. * mips-tdep.c (mips_disassembler_options): New variable. (mips_disassembler_options_o32): Likewise. (mips_disassembler_options_n32): Likewise. (mips_disassembler_options_n64): Likewise. (gdb_print_insn_mips): Don't set `disassembler_options'. (gdb_print_insn_mips_n32, gdb_print_insn_mips_n64): Remove functions. (mips_gdbarch_init): Always set `gdbarch_print_insn' to `gdb_print_insn_mips'. Set `gdbarch_disassembler_options', `gdbarch_disassembler_options_implicit' and `gdbarch_valid_disassembler_options'. * arm-tdep.c (_initialize_arm_tdep): Adapt to using the `disasm_options_and_args_t' structure. * gdbarch.sh (disassembler_options_implicit): New `gdbarch' method. (valid_disassembler_options): Switch from `disasm_options_t' to the `disasm_options_and_args_t' structure. * NEWS: Document `set disassembler-options' support for the MIPS target. * gdbarch.h: Regenerate. * gdbarch.c: Regenerate. gdb/doc/ PR tdep/8282 * gdb.texinfo (Source and Machine Code): Document `set disassembler-options' support for the MIPS target. gdb/testsuite/ PR tdep/8282 * gdb.arch/mips-disassembler-options.exp: New test. * gdb.arch/mips-disassembler-options.s: New test source.
2018-05-21Remove fake operand handling for extended mnemonics.Peter Bergner1-6/+0
opcodes/ * ppc-opc.c (insert_bat, extract_bat, insert_bba, extract_bba, insert_rbs, extract_rbs, insert_xb6s, extract_xb6s): Delete functions. (insert_bab, extract_bab, insert_btab, extract_btab, insert_rsb, extract_rsb, insert_xab6, extract_xab6): New functions. (BAT, BBA VBA RBS XB6S): Delete macros. (BTAB, BAB, VAB, RAB, RSB, XAB6): New macros. (BB, BD, RBX, XC6): Update for new macros. (powerpc_opcodes) <evmr, evnot, vmr, vnot, crnot, crclr, crset, crmove, not, not., mr, mr., xxspltd, xxswapd, xvmovsp, xvmovdp, e_crnot, e_crclr, e_crset, e_crmove>: Likewise. * ppc-dis.c (print_insn_powerpc): Delete handling of fake operands. include/ * opcode/ppc.h (PPC_OPERAND_FAKE): Delete macro. gas/ * config/tc-ppc.c (md_assemble): Delete handling of fake operands. * testsuite/gas/ppc/common.s (crmove, cror, or., or, nor., nor): Add test of extended mnemonics. * testsuite/gas/ppc/common.d: Likewise. Don't match instruction offset. * testsuite/gas/ppc/spe.s (evor, evnor): Add test of extended mnemonics. * testsuite/gas/ppc/spe.d: Likewise. Don't match instruction offset.
2018-05-08Correct powerpc spe opcode lookupAlan Modra1-6/+6
Defining SPE2_OPCD_SEGS as 13 discounts the possibility that we'd ever look up spe2_opcd_indices[14..16], which I think is possible. Extend that array to size 16+1, using the macros we use to index the array. Similarly use the index macros for PPC_OPCD_SEGS and VLE_OPCD_SEGS. * ppc-dis.c (PPC_OPCD_SEGS): Define using PPC_OP. (VLE_OPCD_SEGS, SPE2_OPCD_SEGS): Similarly, using macros used to partition opcode space for index lookup.
2018-05-07Simplify VLE handling in print_insn_powerpc().Peter Bergner1-35/+20
opcodes/ * ppc-dis.c (print_insn_powerpc) <insn_is_short>: Replace this... <insn_length>: ...with this. Update usage. Remove duplicate call to *info->memory_error_func.
2018-05-07Cleanup ppc code dealing with opcode dumps.Peter Bergner1-41/+25
include/ * opcode/ppc.h (powerpc_num_opcodes): Change type to unsigned. (vle_num_opcodes): Likewise. (spe2_num_opcodes): Likewise. opcodes/ * ppc-opc.c (powerpc_num_opcodes): Likewise. (vle_num_opcodes): Likewise. (spe2_num_opcodes): Likewise. * ppc-dis.c (disassemble_init_powerpc) <powerpc_opcd_indices>: Rewrite initialization loop. (disassemble_init_powerpc) <vle_opcd_indices>: Likewise. (disassemble_init_powerpc) <spe2_opcd_indices>: Likewise. Initialize only once. gas/ * config/tc-ppc.c (ppc_setup_opcodes) <powerpc_opcodes>: Rewrite code to dump the entire opcode table. (ppc_setup_opcodes) <spe2_opcodes>: Likewise. (ppc_setup_opcodes) <vle_opcodes>: Likewise. Fix calculation of opcode index.
2018-03-07XCOFF disassemblerAlan Modra1-11/+5
xcoff (32-bit) objdump accepted but ignored -M options unless -mpowerpc was also given. This patch fixes that, leaving the default as -Mpwr for xcoff. I've also enabled more tests for xcoff targets. binutils/ * configure.ac: Add objdump_private_desc_xcoff for rs6000. * configure: Regenerate. gas/ * testsuite/gas/ppc/aix.exp: Run for rs6000 too. * testsuite/gas/ppc/ppc.exp: Run more tests for non-ELF targets. * testsuite/gas/ppc/machine.d: Don't run for PE targets. opcodes/ * disassemble.c (disassembler): Use bfd_arch_powerpc entry for bfd_arch_rs6000. * disassemble.h (print_insn_rs6000): Delete. * ppc-dis.c (powerpc_init_dialect): Handle rs6000. (disassemble_init_powerpc): Call powerpc_init_dialect for rs6000. (print_insn_rs6000): Delete.
2018-03-03opcodes error messagesAlan Modra1-1/+2
Another patch aimed at making binutils comply with the GNU coding standard. The generated files require https://sourceware.org/ml/cgen/2018-q1/msg00004.html cpu/ * frv.opc: Include opintl.h. (add_next_to_vliw): Use opcodes_error_handler to print error. Standardize error message. (fr500_check_insn_major_constraints, frv_vliw_add_insn): Likewise. opcodes/ * sysdep.h (opcodes_error_handler): Define. (_bfd_error_handler): Declare. * Makefile.am: Remove stray #. * opc2c.c (main): Remove bogus -l arg handling. Print "DO NOT EDIT" comment. * aarch64-dis.c, * arc-dis.c, * arm-dis.c, * avr-dis.c, * d30v-dis.c, * h8300-dis.c, * mmix-dis.c, * ppc-dis.c, * riscv-dis.c, * s390-dis.c, * sparc-dis.c, * v850-dis.c: Use opcodes_error_handler to print errors. Standardize error messages. * msp430-decode.opc, * nios2-dis.c, * rl78-decode.opc: Likewise, and include opintl.h. * nds32-asm.c: Likewise, and include sysdep.h and opintl.h. * i386-gen.c: Standardize error messages. * msp430-decode.c, * rl78-decode.c, rx-decode.c: Regenerate. * Makefile.in: Regenerate. * epiphany-asm.c, * epiphany-desc.c, * epiphany-dis.c, * epiphany-ibld.c, * fr30-asm.c, * fr30-desc.c, * fr30-dis.c, * fr30-ibld.c, * frv-asm.c, * frv-desc.c, * frv-dis.c, * frv-ibld.c, * frv-opc.c, * ip2k-asm.c, * ip2k-desc.c, * ip2k-dis.c, * ip2k-ibld.c, * iq2000-asm.c, * iq2000-desc.c, * iq2000-dis.c, * iq2000-ibld.c, * lm32-asm.c, * lm32-desc.c, * lm32-dis.c, * lm32-ibld.c, * m32c-asm.c, * m32c-desc.c, * m32c-dis.c, * m32c-ibld.c, * m32r-asm.c, * m32r-desc.c, * m32r-dis.c, * m32r-ibld.c, * mep-asm.c, * mep-desc.c, * mep-dis.c, * mep-ibld.c, * mt-asm.c, * mt-desc.c, * mt-dis.c, * mt-ibld.c, * or1k-asm.c, * or1k-desc.c, * or1k-dis.c, * or1k-ibld.c, * xc16x-asm.c, * xc16x-desc.c, * xc16x-dis.c, * xc16x-ibld.c, * xstormy16-asm.c, * xstormy16-desc.c, * xstormy16-dis.c, * xstormy16-ibld.c: Regenerate.
2018-01-03Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2017-12-01Use consistent types for holding instructions, instruction masks, etc.Peter Bergner1-47/+43
include/ * opcode/ppc.h (PPC_INT_FMT): Define. (struct powerpc_opcode) <opcode>: Update type. (struct powerpc_opcode) <mask>: Likewise. (struct powerpc_opcode) <bitm>: Likewise. (struct powerpc_opcode) <insert>: Likewise. (struct powerpc_opcode) <extract>: Likewise. (ppc_optional_operand_value): Likewise. gas/ * config/tc-ppc.c (last_insn): Update type. (insn_validate) <omask, mask>: Likewise. (ppc_setup_opcodes) <mask, right_bit>: Likewise. <PRINT_OPCODE_TABLE>: Update types and printf format specifiers. (ppc_insert_operand): Update return and argument types and remove unneeded type casts. <min, max, right, tmp>: Update type. (md_assemble): Remove unneeded type casts. <insn, val, tmp_insn>: Update type. opcodes/ * opcodes/ppc-dis.c (disassemble_init_powerpc): Fix white space. (operand_value_powerpc): Update return and argument type. <value, top>: Update type. (skip_optional_operands): Update argument type. (lookup_powerpc): Likewise. (lookup_vle): Likewise. <table_opcd, table_mask, insn2>: Update type. (lookup_spe2): Update argument type. <table_opcd, table_mask, insn2>: Update type. (print_insn_powerpc) <insn, value>: Update type. Use PPC_INT_FMT for printing instructions and operands. * opcodes/ppc-opc.c (insert_arx, extract_arx, insert_ary, extract_ary, insert_rx, extract_rx, insert_ry, extract_ry, insert_bat, extract_bat, insert_bba, extract_bba, insert_bdm, extract_bdm, insert_bdp, extract_bdp, valid_bo_pre_v2, valid_bo_post_v2, valid_bo, insert_bo, extract_bo, insert_boe, extract_boe, insert_dcmxs, extract_dcmxs, insert_dxd, extract_dxd, insert_dxdn, extract_dxdn, insert_fxm, extract_fxm, insert_li20, extract_li20, insert_ls, extract_ls, insert_esync, extract_esync, insert_mbe, extract_mbe, insert_mb6, extract_mb6, extract_nb, insert_nbi, insert_nsi, extract_nsi, insert_ral, extract_ral, insert_ram, extract_ram, insert_raq, extract_raq, insert_ras, extract_ras, insert_rbs, extract_rbs, insert_rbx, extract_rbx, insert_sci8, extract_sci8, insert_sci8n, extract_sci8n, insert_sd4h, extract_sd4h, insert_sd4w, extract_sd4w, insert_oimm, extract_oimm, insert_sh6, extract_sh6, insert_spr, extract_spr, insert_sprg, extract_sprg, insert_tbr, extract_tbr, insert_xt6, extract_xt6, insert_xtq6, extract_xtq6, insert_xa6, extract_xa6, insert_xb6, extract_xb6, insert_xb6s, extract_xb6s, insert_xc6, extract_xc6, insert_dm, extract_dm, insert_vlesi, extract_vlesi, insert_vlensi, extract_vlensi, insert_vleui, extract_vleui, insert_vleil, extract_vleil, insert_evuimm1_ex0, extract_evuimm1_ex0, insert_evuimm2_ex0, extract_evuimm2_ex0, insert_evuimm4_ex0, extract_evuimm4_ex0, insert_evuimm8_ex0, extract_evuimm8_ex0, insert_evuimm_lt8, extract_evuimm_lt8, insert_evuimm_lt16, extract_evuimm_lt16, insert_rD_rS_even, extract_rD_rS_even, insert_off_lsp, extract_off_lsp, insert_off_spe2, extract_off_spe2, insert_Ddd, extract_Ddd): Update types. (OP, OPTO, OPL, OPVUP, OPVUPRT, A, AFRALFRC_MASK, B, BD8, BD8IO, BD15, BD24, BBO, Y_MASK , AT1_MASK, AT2_MASK, BBOCB, C_LK, C, CTX, UCTX, DX, EVSEL, IA16, I16A, I16L, IM7, LI20, MME, MD, MDS, SC, SC_MASK, SCI8, SCI8BF, SD4, SE_IM5, SE_R, SE_RR, VX, VX_LSP, VX_RA_CONST, VX_RB_CONST, VX_SPE_CRFD, VX_SPE2_CLR, VX_SPE2_SPLATB, VX_SPE2_OCTET, VX_SPE2_DDHH, VX_SPE2_HH, VX_SPE2_EVMAR, VX_SPE2_EVMAR_MASK, VXA, VXR, VXASH, X, EX, XX2, XX3, XX3RC, XX4, Z, XWRA_MASK, XLRT_MASK, XRLARB_MASK, XLRAND_MASK, XRTLRA_MASK, XRTLRARB_MASK, XRTARARB_MASK, XRTBFRARB_MASK, XOPL, XOPL2, XRCL, XRT, XRTRA, XCMP_MASK, XCMPL_MASK, XTO, XTLB, XSYNC, XEH_MASK, XDSS, XFL, XISEL, XL, XLO, XLYLK, XLOCB, XMBAR, XO, XOPS, XS, XFXM, XSPR, XUC, XW, APU): Update types in casts.
2017-08-24[PowerPC VLE] Add SPE2 and EFS2 instructions supportAlexander Fedotov1-2/+81
include/ * opcode/ppc.h: (spe2_opcodes, spe2_num_opcodes): New. (PPC_OPCODE_SPE2): New define. (PPC_OPCODE_EFS2): Likewise. (SPE2_XOP): Likewise. (SPE2_XOP_TO_SEG): Likewise. opcodes/ * ppc-dis.c (ppc_mopt): Add PPC_OPCODE_SPE2 and PPC_OPCODE_EFS2 flag to "e200z4" entry. New entries efs2 and spe2. Add PPC_OPCODE_SPE2 and PPC_OPCODE_EFS2 flag to "vle" entry. (SPE2_OPCD_SEGS): New macro. (spe2_opcd_indices): New. (disassemble_init_powerpc): Handle SPE2 opcodes. (lookup_spe2): New function. (print_insn_powerpc): call lookup_spe2. * ppc-opc.c (insert_evuimm1_ex0): New function. (extract_evuimm1_ex0): Likewise. (insert_evuimm_lt8): Likewise. (extract_evuimm_lt8): Likewise. (insert_off_spe2): Likewise. (extract_off_spe2): Likewise. (insert_Ddd): Likewise. (extract_Ddd): Likewise. (DD): New operand. (EVUIMM_LT8): Likewise. (EVUIMM_LT16): Adjust. (MMMM): New operand. (EVUIMM_1): Likewise. (EVUIMM_1_EX0): Likewise. (EVUIMM_2): Adjust. (NNN): New operand. (VX_OFF_SPE2): Likewise. (BBB): Likewise. (DDD): Likewise. (VX_MASK_DDD): New mask. (HH): New operand. (VX_RA_CONST): New macro. (VX_RA_CONST_MASK): Likewise. (VX_RB_CONST): Likewise. (VX_RB_CONST_MASK): Likewise. (VX_OFF_SPE2_MASK): Likewise. (VX_SPE_CRFD): Likewise. (VX_SPE_CRFD_MASK VX): Likewise. (VX_SPE2_CLR): Likewise. (VX_SPE2_CLR_MASK): Likewise. (VX_SPE2_SPLATB): Likewise. (VX_SPE2_SPLATB_MASK): Likewise. (VX_SPE2_OCTET): Likewise. (VX_SPE2_OCTET_MASK): Likewise. (VX_SPE2_DDHH): Likewise. (VX_SPE2_DDHH_MASK): Likewise. (VX_SPE2_HH): Likewise. (VX_SPE2_HH_MASK): Likewise. (VX_SPE2_EVMAR): Likewise. (VX_SPE2_EVMAR_MASK): Likewise. (PPCSPE2): Likewise. (PPCEFS2): Likewise. (vle_opcodes): Add EFS2 and some missing SPE opcodes. (powerpc_macros): Map old SPE instructions have new names with the same opcodes. Add SPE2 instructions which just are mapped to SPE2. (spe2_opcodes): Add SPE2 opcodes. gas/ * config/tc-ppc.c: (md_parse_option): Add mspe2 switch. (md_show_usage): Document -mspe2. (ppc_setup_opcodes): Handle spe2_opcodes. * doc/as.texinfo: Document -mspe2. * doc/c-ppc.texi: Likewise. * testsuite/gas/ppc/efs.d: New file. * testsuite/gas/ppc/efs.s: Likewise. * testsuite/gas/ppc/efs2.d: Likewise. * testsuite/gas/ppc/efs2.s: Likewise. * testsuite/gas/ppc/ppc.exp: Run new tests. * testsuite/gas/ppc/spe.d: New file. * testsuite/gas/ppc/spe.s: Likewise. * testsuite/gas/ppc/spe2-checks.d: Likewise. * testsuite/gas/ppc/spe2-checks.l: Likewise. * testsuite/gas/ppc/spe2-checks.s: Likewise. * testsuite/gas/ppc/spe2.d: Likewise. * testsuite/gas/ppc/spe2.s: Likewise. * testsuite/gas/ppc/spe_ambiguous.d: Likewise. * testsuite/gas/ppc/spe_ambiguous.s: Likewise.
2017-08-21[PowerPC VLE] Add LSP (Lightweight Signal Processing) instruction supportAlexander Fedotov1-1/+1
include/ * opcode/ppc.h (PPC_OPCODE_LSP): New define. opcodes/ * ppc-opc.c (insert_evuimm2_ex0): New function. (extract_evuimm2_ex0): Likewise. (insert_evuimm4_ex0): Likewise. (extract_evuimm4_ex0): Likewise. (insert_evuimm8_ex0): Likewise. (extract_evuimm8_ex0): Likewise. (insert_evuimm_lt16): Likewise. (extract_evuimm_lt16): Likewise. (insert_rD_rS_even): Likewise. (extract_rD_rS_even): Likewise. (insert_off_lsp): Likewise. (extract_off_lsp): Likewise. (RD_EVEN): New operand. (RS_EVEN): Likewise. (RSQ): Adjust. (EVUIMM_LT16): New operand. (HTM_SI): Adjust. (EVUIMM_2_EX0): New operand. (EVUIMM_4): Adjust. (EVUIMM_4_EX0): New operand. (EVUIMM_8): Adjust. (EVUIMM_8_EX0): New operand. (WS): Adjust. (VX_OFF): New operand. (VX_LSP): New macro. (VX_LSP_MASK): Likewise. (VX_LSP_OFF_MASK): Likewise. (PPC_OPCODE_LSP): Likewise. (vle_opcodes): Add LSP opcodes. * ppc-dis.c (ppc_mopt): Add PPC_OPCODE_LSP flag to "vle" entry. gas/ * testsuite/gas/ppc/lsp-checks.d, * testsuite/gas/ppc/lsp-checks.l, * testsuite/gas/ppc/lsp-checks.s: New test. * testsuite/gas/ppc/lsp.d, * testsuite/gas/ppc/lsp.s: New test. * testsuite/gas/ppc/ppc.exp: Run new tests.
generated by cgit v1.1 at 2024-12-21 09:03:07 +0000