aboutsummaryrefslogtreecommitdiff
path: root/opcodes/mips-opc.c
AgeCommit message (Collapse)AuthorFilesLines
2017-01-02Update year range in copyright notice of all files.Alan Modra1-1/+1
2016-07-13MIPS/opcodes: Address issues with NAL disassemblyMaciej W. Rozycki1-1/+1
Address issues with the disassembly of the NAL assembly idiom and R6 instruction introduced with commit 7361da2c952e ("Add support for MIPS R6.") and then further tweaked with commit b9121b573e2e ("Add in a JALRC alias and fix the NAL instruction."). As from R6 this instruction has replaced the encoding of `bltzal $0, . + 4' as the solely supported form of the former BLTZAL instruction for the regular MIPS ISA. The instruction is marked as an alias only in our regular MIPS opcode table, making it fail to disassemble in R6 code if the `no-aliases' machine option has been passed to `objdump': $ cat test.s .text foo: nal $ as -mips64r6 -o test.o test.s $ objdump -dr --prefix-addresses --show-raw-insn -M no-aliases test.o nal.o: file format elf32-tradbigmips Disassembly of section .text: 00000000 <foo> 04100000 0x4100000 ... $ This is because the `bltzal' entry has been marked as pre-R6 only in the opcode table and there is no other opcode pattern to match. Additionally the changes referred made NAL replace the equivalent `bltzal $0, . + 4' instruction in disassembly, unless the `no-aliases' machine option has been used, in legacy code. Seeing NAL, especially in its updated form lacking the branch target argument, in the disassembly of such code may be confusing to people. This is because unlike with EHB only used in R2 and newer code -- the machine encoding of which we anyway always disassemble to its corresponding current architecture's mnemonic rather than its legacy meaning of `sll $0, $0, 3' -- BLTZAL has been indeed used in legacy code. Even though `bltzal $0, . + 8' and its machine code encoding (0x04100001) -- which is not equivalent to NAL and still disassembles as BLTZAL -- has been the predominant form as opposed to NAL's `bltzal $0, . + 4' (0x04100000), it makes sense to always keep the old form in disassembly, while still accepting `nal' in assembly. Remove the alias marking then from the the `nal' instruction pattern, making it always match for R6 code, even with the `no-aliases' option. And move the entry beyond the `bltzal' entry, making the latter one take precedence for legacy binary code, while letting the former still match any `nal' mnemonic in source code assembled for a legacy target. Add a suitable test case to the GAS test suite. While the change affects the disassembler more than the assembler, so placing the test case in the binutils test suite might be more appropriate, the intent is also to verify that `nal' is still accepted by GAS for legacy targets, plus we have test infrastructure available in the GAS test suite for automatic multiple ISA level testing, which we lack from the binutils framework. opcodes/ * mips-opc.c (mips_builtin_opcodes): Remove the INSN2_ALIAS annotation from the "nal" entry and reorder it beyond "bltzal". gas/ * testsuite/gas/mips/nal-1.d: New test. * testsuite/gas/mips/mipsr6@nal-1.d: New test. * testsuite/gas/mips/nal-2.d: New test. * testsuite/gas/mips/mipsr6@nal-2.d: New test. * testsuite/gas/mips/nal.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests.
2016-05-11Add MIPS32 DSPr3 support.Matthew Fortune1-0/+2
bfd/ * elfxx-mips.c (print_mips_ases): Add DSPR3. binutils/ * readelf.c (print_mips_ases): Add DSPR3. gas/ * config/tc-mips.c (options): Add OPTION_DSPR3 and OPTION_NO_DSPR3. (md_longopts): Likewise. (md_show_usage): Add help for -mdspr3 and -mno-dspr3. (mips_ases): Define availability for DSPr3. (mips_ase_groups): Add ASE_DSPR3 to the DSP group. (mips_convert_ase_flags): Map ASE_DSPR3 to AFL_ASE_DSPR3. * doc/as.texinfo: Document -mdspr3, -mno-dspr3. Fix -mdspr2 formatting. * doc/c-mips.texi: Document -mdspr3, -mno-dspr3, .set dspr3 and .set nodspr3. Fix -mdspr2 formatting. * testsuite/gas/mips/mips32-dspr3.d: New file. * testsuite/gas/mips/mips32-dspr3.s: Likewise. * testsuite/gas/mips/mips.exp: Run mips32-dspr3 test. include/ * elf/mips.h (AFL_ASE_DSPR3): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_DSPR3. * opcode/mips.h (ASE_DSPR3): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add ASE_DSPR3 to mips32r6 and mips64r6. * mips-opc.c (D34): New macro. (mips_builtin_opcodes): Define bposge32c for DSPr3.
2016-01-01Copyright update for binutilsAlan Modra1-1/+1
2015-11-09Move copy_u.w to MSA64 ASE, remove copy_u.d.Robert Suchanek1-2/+1
opcodes/ChangeLog: * mips-opc.c (mips_builtin_opcodes): Change "copy_u.w" to MSA64 ASE, remove "copy_u.d". gas/testsuite/ChangeLog: * gas/mips/micromips@msa.d: Remove "copy_u.w". * gas/mips/msa.d: Likewise. * gas/mips/msa.s: Likweise. * gas/mips/mipsr6@msa.d: Likewise. Replace addresses with regex. * gas/mips/msa64.d: Add "copy_u.w". Remove "copy_u.d". * gas/mips/msa64.s: Likewise. * gas/mips/micromips@msa64.d: Likewise.
2015-08-12[MIPS] Map 'move' to 'or'.Simon Dardis1-1/+1
The MIPS assembly idiom 'move' now maps to the 'or' machine instruction. This change affects microMIPS, MIPS32, MIPS64. 2015-08-12 Simon Dardis <simon.dardis@imgtec.com> opcodes/ * micromips-opc.c (micromips_opcodes): Re-order table so that move based on 'or' is first. * mips-opc.c (mips_builtin_opcodes): Ditto. bfd/ * elfxx-mips.c (STUB_MOVE): Change to use 'or' only. (mips_o32_exec_plt0_entry, mips_n32_exec_plt0_entry, mips_n64_exec_plt0_entry, micromips_insn32_o32_exec_plt0_entry): Update to use 'or' instead of 'addu/daddu'. (_bfd_mips_elf_finish_dynamic_symbol): Update usage of STUB_MOVE. (move_insns_32): Reorder table. gas/ * config/tc-mips.c (move_register): Change to use 'or' only. (s_cpload, s_cpsetup, s_cprestore, s_cpreturn): Update to use or for move. gas/testsuite/ * gas/mips/elf-rel23.d: Update test. * gas/mips/elf-rel23.d: Ditto. * gas/mips/elf-rel23a.d: Ditto. * gas/mips/elf-rel23b.d: Ditto. * gas/mips/elf_e_flags1.d: Ditto. * gas/mips/elf_e_flags2.d: Ditto. * gas/mips/elf_e_flags3.d: Ditto. * gas/mips/elf_e_flags4.d: Ditto. * gas/mips/loc-swap-dis.d: Ditto. * gas/mips/micromips-insn32.d: Ditto. * gas/mips/micromips-noinsn32.d: Ditto. * gas/mips/micromips-trap.d: Ditto. * gas/mips/micromips.d: Ditto. * gas/mips/mips-abi32-pic.d: Ditto. * gas/mips/mips-abi32.d: Ditto. * gas/mips/mips-gp32-fp32-pic.d: Ditto. * gas/mips/mips-gp32-fp32.d: Ditto. * gas/mips/mips-gp32-fp64-pic.d: Ditto. * gas/mips/mips-gp32-fp64.d: Ditto. * gas/mips/mips-gp64-fp32-pic.d: Ditto. * gas/mips/mips-gp64-fp32.d: Ditto. * gas/mips/mips-gp64-fp64-pic.d: Ditto. * gas/mips/mips-gp64-fp64.d: Ditto. * gas/mips/mipsr6@loc-swap-dis.d: Ditto. * gas/mips/tls-o32.d: Ditto. * gas/mips/uld2-eb.d: Ditto. * gas/mips/uld2-el.d: Ditto. * gas/mips/ulw2-eb-ilocks.d: Ditto. * gas/mips/ulw2-eb.d: Ditto. * gas/mips/ulw2-el-ilocks.d: Ditto. * gas/mips/ulw2-el.d: Ditto. * gas/mips/move.d: New test. * gas/mips/move.s: Ditto. * gas/mips/micromips32-move.d: Ditto. * gas/mips/micromips32-move.s: Ditto. * gas/mips/mips.exp: Run the new tests. gold/ * mips.cc (plt0_entry_o32, plt0_entry_n32, plt0_entry_n64, lazy_stub_normal_1, lazy_stub_normal_1_n64, lazy_stub_normal_2, lazy_stub_normal_2_n64, lazy_stub_big, lazy_stub_big_n64, lazy_stub_micromips32_normal_1_n64, lazy_stub_micromips32_normal_2_n64, lazy_stub_micromips32_big, lazy_stub_micromips32_big_n64): Update to use 'or' for move instead of 'addu/daddu'. ld/testsuite/ * ld-mips-elf/compressed-plt-1-n32-mips16.od: Update test. * ld-mips-elf/compressed-plt-1-n32-umips.od: Ditto. * ld-mips-elf/compressed-plt-1-o32-mips16-got.od: Ditto. * ld-mips-elf/compressed-plt-1-o32-mips16-only.od: Ditto. * ld-mips-elf/compressed-plt-1-o32-mips16-word.od: Ditto. * ld-mips-elf/compressed-plt-1-o32-mips16.od: Ditto. * ld-mips-elf/compressed-plt-1-o32-se.od: Ditto. * ld-mips-elf/compressed-plt-1-o32-umips-got.od: Ditto. * ld-mips-elf/compressed-plt-1-o32-umips-word.od: Ditto. * ld-mips-elf/compressed-plt-1-o32-umips.od: Ditto. * ld-mips-elf/jalx-2.dd: Ditto. * ld-mips-elf/mips16-pic-3.dd: Ditto. * ld-mips-elf/pic-and-nonpic-3a.dd: Ditto. * ld-mips-elf/pic-and-nonpic-3b.dd: Ditto. * ld-mips-elf/pic-and-nonpic-5b.dd: Ditto. * ld-mips-elf/pic-and-nonpic-6-n32.dd: Ditto. * ld-mips-elf/pic-and-nonpic-6-o32.dd: Ditto. * ld-mips-elf/stub-dynsym-1-10000.d: Ditto. * ld-mips-elf/stub-dynsym-1-2fe80.d: Ditto. * ld-mips-elf/stub-dynsym-1-7fff.d: Ditto. * ld-mips-elf/stub-dynsym-1-8000.d: Ditto. * ld-mips-elf/stub-dynsym-1-fff0.d: Ditto. * ld-mips-elf/tlsbin-o32.d: Ditto. * ld-mips-elf/tlsdyn-o32-1.d: Ditto. * ld-mips-elf/tlsdyn-o32-2.d: Ditto. * ld-mips-elf/tlsdyn-o32-3.d: Ditto. * ld-mips-elf/tlsdyn-o32.d: Ditto. * ld-mips-elf/tlslib-o32.d: Ditto.
2015-08-12Remove trailing spaces in opcodesH.J. Lu1-4/+4
2015-08-10Add SIGRIE instruction for MIPS R6Robert Suchanek1-0/+1
opcodes/ * mips-opc.c (mips_builtin_opcodes): Add "sigrie". gas/testsuite/ * gas/mips/r6.s: Add tests for "sigrie". * gas/mips/r6.d: Check for "sigrie". * gas/mips/r6-n32.d: Likewise. * gas/mips/r6-n64.d: Likewise.
2015-03-13MIPS: Fix constraint issues with the R6 beqc and bnec instructionsAndrew Bennett1-2/+2
opcodes/ * mips-opc.c (decode_mips_operand): Fix constraint issues with u and y operands. gas/testsuite/ * gas/mips/mips.exp: Added branch constraints testcase. * gas/mips/r6-branch-constraints.s: New test. * gas/mips/r6-branch-constraints.l: New test.
2015-03-13Add support for MIPS R6 evp and dvp instructions.Andrew Bennett1-0/+4
opcodes/ * mips-opc.c (mips_builtin_opcodes): Add evp and dvp instructions. gas/testsuite/ * gas/mips/r6.s: Add evp and dvp instructions. * gas/mips/r6.d: Likewise. * gas/mips/r6-n32.d: Likewise. * gas/mips/r6-n64.d: Likewise.
2015-01-02ChangeLog rotatation and copyright year updateAlan Modra1-1/+1
2014-12-16Add in a JALRC alias and fix the NAL instruction.Matthew Fortune1-1/+2
opcodes/ * mips-opc.c (mips_builtin_opcodes): Add JALRC alias for JIALC. Remove the operand from NAL. gas/testsuite/ * gas/mips/r6.s: Test JALRC and NAL * gas/mips/r6-n32.d: Add expected output for JALRC and NAL. * gas/mips/r6-n64.d: Likewise. * gas/mips/r6.d: Likewise.
2014-10-31MIPS: Add Octeon 3 supportNaveen H.S1-3/+10
binutils: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * readelf.c (print_mips_isa_ext): Print the value of Octeon3. gas: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * config/tc-mips.c (CPU_IS_OCTEON): Handle CPU_OCTEON3. (mips_cpu_info_table): Octeon3 enables virt ase. * doc/c-mips.texi: Document octeon3 as an acceptable value for -march=. gas/testsuite: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * gas/mips/mips.exp: Add support for Octeon3 architecture. Also add in support for running Octeon3 tests. * gas/mips/octeon3.d: New test. * gas/mips/octeon3.s: New test source. opcodes: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * mips-dis.c (mips_arch_choices): Add octeon3. * mips-opc.c (IOCT): Include INSN_OCTEON3. (IOCT2): Likewise. (IOCT3): New define. (IVIRT): New define. (mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0, tlbinv, tlbinvf, tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp, tlti IVIRT instructions. Extend mtm0, mtm1, mtm2, mtp0, mtp1, mtp2 instructions to take another operand for IOCT3. bfd: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * archures.c: Add octeon3 for mips target. * bfd-in2.h: Regenerate. * bfd/cpu-mips.c: Define I_mipsocteon3. nfo_struct): Add octeon3 support. * bfd/elfxx-mips.c: (_bfd_elf_mips_mach): Add support for octeon3. (mips_set_isa_flags): Add support for octeon3. (bfd_mips_isa_ext): Add bfd_mach_mips_octeon3. (mips_mach_extensions): Make bfd_mach_mips_octeon3 an extension of bfd_mach_mips_octeon2. (print_mips_isa_ext): Print the value of Octeon3.
2014-09-15Add support for MIPS R6.Andrew Bennett1-347/+547
bfd/ * aoutx.h (NAME (aout, machine_type)): Add mips32r6 and mips64r6. * archures.c (bfd_architecture): Likewise. * bfd-in2.h (bfd_architecture): Likewise. (bfd_reloc_code_real): Add relocs BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2. * cpu-mips.c (arch_info_struct): Add mips32r6 and mips64r6. * elf32-mips.c: Define relocs R_MIPS_PC21_S2, R_MIPS_PC26_S2 R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. * elf64-mips.c: Define REL, and RELA relocations R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. * elfn32-mips.c: Likewise. * elfxx-mips.c (MIPSR6_P): New define. (mipsr6_exec_plt_entry): New array. (hi16_reloc_p): Add support for R_MIPS_PCHI16. (lo16_reloc_p): Add support for R_MIPS_PCLO16. (aligned_pcrel_reloc_p): New function. (mips_elf_relocation_needs_la25_stub): Add support for relocs: R_MIPS_PC21_S2 and R_MIPS_PC26_S2. (mips_elf_calculate_relocation): Add support for relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (_bfd_elf_mips_mach): Add support for mips32r6 and mips64r6. (mips_elf_add_lo16_rel_addend): Add support for R_MIPS_PCHI16. (_bfd_mips_elf_check_relocs): Add support for relocs: R_MIPS_PC21_S2 and R_MIPS_PC26_S2. (_bfd_mips_elf_relocate_section): Add a check for unaligned pc relative relocs. (_bfd_mips_elf_finish_dynamic_symbol): Add support for MIPS r6 plt entry. (mips_set_isa_flags): Add support for mips32r6 and mips64r6. (_bfd_mips_elf_print_private_bfd_data): Likewise. (mips_32bit_flags_p): Add support for mips32r6. * libbfd.h (bfd_reloc_code_real_names): Add entries for BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2. * reloc.c: Document relocs BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2. binutils/ * readelf.c (get_machine_flags): Add support for mips32r6 and mips64r6. elfcpp/ * mips.h (E_MIPS_ARCH_32R6, E_MIPS_ARCH_64R6): New enum constants. gas/ * config/tc-mips.c (mips_nan2008): New static global. (mips_flag_nan2008): Removed. (LL_SC_FMT): New define. (COP12_FMT): Updated. (ISA_IS_R6): New define. (ISA_HAS_64BIT_REGS): Add mips64r6. (ISA_HAS_DROR): Likewise. (ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6. (ISA_HAS_ROR): Likewise. (ISA_HAS_ODD_SINGLE_FPR): Likewise. (ISA_HAS_MXHC1): Likewise. (hilo_interlocks): Likewise. (md_longopts): Likewise. (ISA_HAS_LEGACY_NAN): New define. (options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6. (mips_ase): Add field rem_rev. (mips_ases): Updated to add which ISA an ASE was removed in. (mips_isa_rev): Add support for mips32r6 and mips64r6. (mips_check_isa_supports_ase): Add support to check if an ASE has been removed in the specified MIPS ISA revision. (validate_mips_insn): Skip '-' character. (macro_build): Likewise. (mips_check_options): Prevent R6 working with fp32, mips16, micromips, or branch relaxation. (file_mips_check_options): Set R6 floating point registers to 64 bit. Also deal with the nan2008 option. (limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. (operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. (match_check_prev_operand): New static function. (match_same_rs_rt_operand): New static function. (match_non_zero_reg_operand): New static function. (match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. (insns_between): Added case to deal with forbidden slots. (append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2 and BFD_RELOC_MIPS_26_PCREL_S2. (match_insn): Add support for operands -A, -B, +' and +". Also skip '-' character. (mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo. (md_parse_option): Add support for mips32r6 and mips64r6. Also update the nan option handling. (md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2. (mips_force_relocation): Prevent forced relaxation for MIPS r6. (md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. (s_mipsset): Add support for mips32r6 and mips64r6. (s_nan): Update to support the new nan2008 framework. (tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. (mips_elf_final_processing): Updated to use the mips_nan2008. (mips_cpu_info_table): Add entries for mips32r6 and mips64r6. (macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref macros for R6. (mips_fix_adjustable): Make PC relative R6 relocations relative to the symbol and not the section. * configure.ac: Add support for mips32r6 and mips64r6. * configure: Regenerate. * doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line options. * doc/as.texinfo: Likewise. gas/testsuite/ * gas/mips/24k-triple-stores-1.s: If testing for r6 prevent non-supported instructions from being tested. * gas/mips/24k-triple-stores-2.s: Likewise. * gas/mips/24k-triple-stores-3.s: Likewise. * gas/mips/24k-triple-stores-6.s: Likewise. * gas/mips/beq.s: Likewise. * gas/mips/eva.s: Likewise. * gas/mips/ld-zero-3.s: Likewise. * gas/mips/mips32-cp2.s: Likewise. * gas/mips/mips32.s: Likewise. * gas/mips/mips4.s: Likewise. * gas/mips/add.s: Don't test the add instructions if r6, and add padding. * gas/mips/add.d: Check for a triple dot not a nop at the end of the disassembly output. * gas/mips/micromips@add.d: Likewise. * gas/mips/mipsr6@24k-branch-delay-1.d: New file. * gas/mips/mipsr6@24k-triple-stores-1.d: New file. * gas/mips/mipsr6@24k-triple-stores-2-llsc.d: New file. * gas/mips/mipsr6@24k-triple-stores-2.d: New file. * gas/mips/mipsr6@24k-triple-stores-3.d: New file. * gas/mips/mipsr6@24k-triple-stores-6.d: New file. * gas/mips/mipsr6@add.d: New file. * gas/mips/mipsr6@attr-gnu-4-1-msingle-float.l: New file. * gas/mips/mipsr6@attr-gnu-4-1-msingle-float.s: New file. * gas/mips/mipsr6@attr-gnu-4-1-msoft-float.l: New file. * gas/mips/mipsr6@attr-gnu-4-1-msoft-float.s: New file. * gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.l: New file. * gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.s: New file. * gas/mips/mipsr6@beq.d: New file. * gas/mips/mipsr6@bge.d: New file. * gas/mips/mipsr6@bgeu.d: New file. * gas/mips/mipsr6@blt.d: New file. * gas/mips/mipsr6@bltu.d: New file. * gas/mips/mipsr6@branch-misc-1.d: New file. * gas/mips/mipsr6@branch-misc-2-64.d: New file. * gas/mips/mipsr6@branch-misc-2pic-64.d: New file. * gas/mips/mipsr6@branch-misc-4-64.d: New file. * gas/mips/mipsr6@cache.d: New file. * gas/mips/mipsr6@eva.d: New file. * gas/mips/mipsr6@jal-svr4pic-noreorder.d: New file. * gas/mips/mipsr6@jal-svr4pic.d: New file. * gas/mips/mipsr6@ld-zero-2.d: New file. * gas/mips/mipsr6@ld-zero-3.d: New file. * gas/mips/mipsr6@loc-swap-dis.d: New file. * gas/mips/mipsr6@mips32-cp2.d: New file. * gas/mips/mipsr6@mips32-imm.d: New file. * gas/mips/mipsr6@mips32.d: New file. * gas/mips/mipsr6@mips32r2.d: New file. * gas/mips/mipsr6@mips4-fp.d: New file. * gas/mips/mipsr6@mips4-fp.l: New file. * gas/mips/mipsr6@mips4-fp.s: New file. * gas/mips/mipsr6@mips4.d: New file. * gas/mips/mipsr6@mips5-fp.d: New file. * gas/mips/mipsr6@mips5-fp.l: New file. * gas/mips/mipsr6@mips5-fp.s: New file. * gas/mips/mipsr6@mips64.d: New file. * gas/mips/mipsr6@msa-branch.d: New file. * gas/mips/mipsr6@msa.d: New file. * gas/mips/mipsr6@pref.d: New file. * gas/mips/mipsr6@relax-swap3.d: New file. * gas/mips/r6-64-n32.d: New file. * gas/mips/r6-64-n64.d: New file. * gas/mips/r6-64-removed.l: New file. * gas/mips/r6-64-removed.s: New file. * gas/mips/r6-64.s: New file. * gas/mips/r6-attr-none-double.d: New file. * gas/mips/r6-n32.d: New file. * gas/mips/r6-n64.d: New file. * gas/mips/r6-removed.l: New file. * gas/mips/r6-removed.s: New file. * gas/mips/r6.d: New file. * gas/mips/r6.s: New file. * gas/mips/mipsr6@mips32-dsp.d: New file. * gas/mips/mipsr6@mips32-dspr2.d: New file. * gas/mips/mipsr6@mips32r2-ill.l: New file. * gas/mips/mipsr6@mips32r2-ill.s: New file. * gas/mips/cache.s: Add r6 instruction varients. * gas/mips/mips.exp: Add support for the mips32r6 and mips64r6 architectures. Also prevent non r6 supported tests from running. Finally, add in support for running the new r6 tests. (run_dump_test_arch): Add support for mipsr6 tests. (run_list_test_arch): Add support for using files of the form arch@testname.l . include/elf/ * mips.h: Add relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (E_MIPS_ARCH_32R6): New define. (E_MIPS_ARCH_64R6): New define. include/opcode/ * mips.h (mips_operand_type): Add new entries: OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. Add descriptions for the MIPS R6 instruction arguments: -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +; (mips_check_prev_operand): New struct. (INSN2_FORBIDDEN_SLOT): New define. (INSN_ISA32R6): New define. (INSN_ISA64R6): New define. (INSN_UPTO32R6): New define. (INSN_UPTO64R6): New define. (mips_isa_table): Add INSN_UPTO32R6 and INSN_UPTO64R6. (ISA_MIPS32R6): New define. (ISA_MIPS64R6): New define. (CPU_MIPS32R6): New define. (CPU_MIPS64R6): New define. (cpu_is_member): Add cases for CPU_MIPS32R6, and CPU_MIPS64R6. ld/ * ldmain.c (get_emulation): Add support for -mips32r6 and -mips64r6. opcodes/ * mips-dis.c (mips_arch_choices): Add entries for mips32r6 and mips64r6. (parse_mips_dis_option): Allow MSA and virtualization support for mips64r6. (mips_print_arg_state): Add fields dest_regno and seen_dest. (mips_seen_register): New function. (print_insn_arg): Refactored code to use mips_seen_register function. Add support for OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. Changed OP_REPEAT_DEST_REG case to print out the register rather than aborting. (print_insn_args): Add length argument. Add code to correctly calculate the instruction address for pc relative instructions. (validate_insn_args): New static function. (print_insn_mips): Prevent jalx disassembling for r6. Use validate_insn_args. (print_insn_micromips): Use validate_insn_args. all the arguments are valid. * mips-formats.h (PREV_CHECK): New define. * mips-opc.c (decode_mips_operand): Add support for -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +; (RD_pc): New define. (FS): New define. (I37): New define. (I69): New define. (mips_builtin_opcodes): Add MIPS R6 instructions. Exclude recoded MIPS R6 instructions from MIPS R2 instructions.
2014-07-29[MIPS] Rename COPROC related macrosMatthew Fortune1-120/+120
gas/ * config/tc-mips.c: Rename INSN_LOAD_COPROC_DELAY to INSN_LOAD_COPROC and INSN_COPROC_MOVE_DELAY to INSN_COPROC_MOVE throughout. include/opcode/ * mips.h (INSN_LOAD_COPROC_DELAY): Rename to... (INSN_LOAD_COPROC): New define. (INSN_COPROC_MOVE_DELAY): Rename to... (INSN_COPROC_MOVE): New define. opcodes/ * micromips-opc.c (COD): Rename throughout to... (CM): New define, update to use INSN_COPROC_MOVE. (LCD): Rename throughout to... (LC): New define, update to use INSN_LOAD_COPROC. * mips-opc.c: Likewise.
2014-07-29[MIPS] Implement O32 FPXX, FP64 and FP64A ABI extensionsMatthew Fortune1-8/+8
Specification: https://dmz-portal.mips.com/wiki/MIPS_O32_ABI_-_FR0_and_FR1_Interlinking include/ * elf/mips.h (PT_MIPS_ABIFLAGS, SHT_MIPS_ABIFLAGS): Define. (Val_GNU_MIPS_ABI_FP_OLD_64): Rename from Val_GNU_MIPS_ABI_FP_64. (Val_GNU_MIPS_ABI_FP_64): Redefine. (Val_GNU_MIPS_ABI_FP_XX): Define. (Elf_External_ABIFlags_v0, Elf_Internal_ABIFlags_v0): New structures. (AFL_REG_NONE, AFL_REG_32, AFL_REG_64, AFL_REG_128): Define. (AFL_ASE_DSP, AFL_ASE_DSPR2, AFL_ASE_EVA, AFL_ASE_MCU): Likewise. (AFL_ASE_MDMX, AFL_ASE_MIPS3D, AFL_ASE_MT, AFL_ASE_SMARTMIPS): Likewise. (AFL_ASE_VIRT, AFL_ASE_MSA, AFL_ASE_MIPS16): Likewise. (AFL_ASE_MICROMIPS, AFL_ASE_XPA): Likewise. (AFL_EXT_XLR, AFL_EXT_OCTEON2, AFL_EXT_OCTEONP): Likewise. (AFL_EXT_LOONGSON_3A, AFL_EXT_OCTEON, AFL_EXT_5900): Likewise. (AFL_EXT_4650, AFL_EXT_4010, AFL_EXT_4100, AFL_EXT_3900): Likewise. (AFL_EXT_10000, AFL_EXT_SB1, AFL_EXT_4111, AFL_EXT_4120): Likewise. (AFL_EXT_5400, AFL_EXT_5500, AFL_EXT_LOONGSON_2E): Likewise. (AFL_EXT_LOONGSON_2F): Likewise. (bfd_mips_elf_swap_abiflags_v0_in): Prototype. (bfd_mips_elf_swap_abiflags_v0_out): Likewise. (bfd_mips_isa_ext): Likewise. bfd/ * elfxx-mips.c (ABI_O32_P, MIPS_ELF_ABIFLAGS_SECTION_NAME_P): New macro. (mips_elf_obj_tdata): Add abiflags and abiflags_valid fields. (bfd_mips_elf_swap_abiflags_v0_in): New function. (bfd_mips_elf_swap_abiflags_v0_out): Likewise. (_bfd_mips_elf_section_from_shdr): Handle SHT_MIPS_ABIFLAGS. (_bfd_mips_elf_fake_sections): Likewise. (_bfd_mips_elf_always_size_sections): Handle .MIPS.abiflags. (_bfd_mips_elf_additional_program_headers): Account for new PT_MIPS_ABIFLAGS program header. (_bfd_mips_elf_modify_segment_map): Create PT_MIPS_ABIFLAGS segment and associate with .MIPS.abiflags. (_bfd_mips_elf_gc_mark_extra_sections): New function. (bfd_mips_isa_ext, update_mips_abiflags_isa): New static function. (infer_mips_abiflags): Likewise. (_bfd_mips_elf_final_link): Handle .MIPS.abiflags. (mips_32bit_flags_p): Moved higher. (mips_elf_merge_obj_attributes, _bfd_mips_fp_abi_string): Error checking for FP ABIs. (_bfd_mips_elf_merge_private_bfd_data): Restructure and add abiflags checks. Check EF_MIPS_FP64 flag consistency. (print_mips_ases, print_mips_isa_ext): New static function. (print_mips_fp_abi_value, get_mips_reg_size): Likewise. (_bfd_mips_elf_print_private_bfd_data): Display abiflags data. (_bfd_mips_post_process_headers): Set EI_ABIVERSION = 3 for Val_GNU_MIPS_ABI_FP_64 or Val_GNU_MIPS_ABI_FP_64A. * elfxx-mips.h (_bfd_mips_elf_gc_mark_extra_sections): New prototype. * elf32-mips.c (elf_backend_gc_mark_extra_sections): Implement. * elfn32-mips.c (elf_backend_gc_mark_extra_sections): Implement. * elf64-mips.c (elf_backend_gc_mark_extra_sections): Implement. binutils/ * readelf.c (get_mips_segment_type): Display name for PT_MIPS_ABIFLAGS. (get_mips_section_type_name): Display name for SHT_MIPS_ABIFLAGS. (display_mips_gnu_attribute): Abstracted fp abi printing to... (print_mips_fp_abi_value): New static function. Handle new FP ABIs. (print_mips_ases, print_mips_isa_ext): New static functions. (get_mips_reg_size): Likewise. (process_mips_specific): Display abiflags data. elfcpp/ * elfcpp.h (PT_MIPS_ABIFLAGS): New program header type. gas/ * config/tc-mips.c (mips_flags_frag): New static global. (struct mips_set_options): Add oddspreg field. (file_mips_opts, mips_opts): Initialize oddspreg. (ISA_HAS_ODD_SINGLE_FPR): Add CPU argument and update for R5900 and Loongson-3a. (enum options, md_longopts, md_parse_option): Add -mfpxx, -modd-spreg and -mno-odd-spreg options. (md_begin): Create .MIPS.abiflags section. (fpabi_incompatible_with, fpabi_requires): New static function. (check_fpabi): Likewise. (mips_check_options): Handle fp=xx and oddspreg restrictions. (file_mips_check_options): Set oddspreg by default for fp=xx. (mips_oddfpreg_ok): Re-write function. (check_regno): Check odd numbered registers regardless of FPR size. For fp != 32 use as_bad instead of as_warn. (match_float_constant): Rewrite check regarding FP register width. Add support for generating constants when MXHC1 is present. Handle fp=xx to comply with the ABI. (macro): Update M_LI_DD similarly to match_float_constant. Generate MTHC1 when available. Check that correct code can be generated for fp=xx and fp=64 ABIs. (parse_code_option, s_mipsset): Add fp=xx, oddspreg and nooddspreg options. (mips_convert_ase_flags): New static function. (mips_elf_final_processing): Use fpabi == Val_GNU_MIPS_ABI_FP_OLD_64 to determine when to add the EF_MIPS_FP64 flag. Populate the .MIPS.abiflags section. (md_mips_end): Update .gnu_attribute based on command line and .module as applicable. Use check_fpabi to ensure .gnu.attribute and command line/.module options are consistent. * doc/as.texinfo: Add missing -mgp64/-mfp64 options and document new -mfpxx, -modd-spreg and -mno-odd-spreg options. * doc/c-mips.texi: Document -mfpxx, -modd-spreg, -mno-odd-spreg, gnu_attribute values and FP ABIs. ld/ * emulparams/elf32bmip.sh: Add .MIPS.abiflags. * emulparams/elf32bmipn32-defs.sh: Likewise. * emulparams/elf64bmip-defs.sh: Likewise. opcodes/ * micromips-opc.c (COD, LCD) New macros. (cfc1, ctc1): Remove FP_S attribute. (dmfc1, mfc1, mfhc1): Add LCD attribute. (dmtc1, mtc1, mthc1): Add COD attribute. * mips-opc.c (cfc1, cftc1, ctc, cttc1): Remove FP_S attribute. binutils/testsuite/ * binutils-all/readelf.s: Account for .MIPS.abiflags and .gnu.attributes. * binutils-all/readelf.ss-tmips: Likewise. * binutils-all/strip-3.d: Likewise. gas/testsuite/ * gas/mips/attr-gnu-4-0.d: New. * gas/mips/attr-gnu-4-0.s: Likewise. * gas/mips/attr-gnu-4-1-mfp32.l: Likewise. * gas/mips/attr-gnu-4-1-mfp32.s: Likewise. * gas/mips/attr-gnu-4-1-mfp64.l: Likewise. * gas/mips/attr-gnu-4-1-mfp64.s: Likewise. * gas/mips/attr-gnu-4-1-mfpxx.s: Likewise. * gas/mips/attr-gnu-4-1-msingle-float.l: Likewise. * gas/mips/attr-gnu-4-1-msingle-float.s: Likewise. * gas/mips/attr-gnu-4-1-msoft-float.l: Likewise. * gas/mips/attr-gnu-4-1-msoft-float.s: Likewise. * gas/mips/attr-gnu-4-1.d: Likewise. * gas/mips/attr-gnu-4-1.s: Likewise. * gas/mips/attr-gnu-4-2-mdouble-float.l: Likewise. * gas/mips/attr-gnu-4-2-mdouble-float.s: Likewise. * gas/mips/attr-gnu-4-2-msoft-float.l: Likewise. * gas/mips/attr-gnu-4-2-msoft-float.s: Likewise. * gas/mips/attr-gnu-4-2.d: Likewise. * gas/mips/attr-gnu-4-2.s: Likewise. * gas/mips/attr-gnu-4-3-mhard-float.l: Likewise. * gas/mips/attr-gnu-4-3-mhard-float.s: Likewise. * gas/mips/attr-gnu-4-3.d: Likewise. * gas/mips/attr-gnu-4-3.s: Likewise. * gas/mips/attr-gnu-4-4.l: Likewise. * gas/mips/attr-gnu-4-4.s: Likewise. * gas/mips/attr-gnu-4-5-64.l: Likewise. * gas/mips/attr-gnu-4-5-64.s: Likewise. * gas/mips/attr-gnu-4-5.d: Likewise. * gas/mips/attr-gnu-4-5.l: Likewise. * gas/mips/attr-gnu-4-5.s: Likewise. * gas/mips/attr-gnu-4-6-64.l: Likewise. * gas/mips/attr-gnu-4-6-64.s: Likewise. * gas/mips/attr-gnu-4-6.d: Likewise. * gas/mips/attr-gnu-4-6.l: Likewise. * gas/mips/attr-gnu-4-6.s: Likewise. * gas/mips/attr-gnu-4-6-msingle-float.l: Likewise. * gas/mips/attr-gnu-4-6-msingle-float.s: Likewise. * gas/mips/attr-gnu-4-6-msoft-float.l: Likewise. * gas/mips/attr-gnu-4-6-msoft-float.s: Likewise. * gas/mips/attr-gnu-4-6-noodd.l: Likewise. * gas/mips/attr-gnu-4-6-noodd.s: Likewise. * gas/mips/attr-gnu-4-7-64.l: Likewise. * gas/mips/attr-gnu-4-7-64.s: Likewise. * gas/mips/attr-gnu-4-7-msingle-float.l: Likewise. * gas/mips/attr-gnu-4-7-msingle-float.s: Likewise. * gas/mips/attr-gnu-4-7-msoft-float.l: Likewise. * gas/mips/attr-gnu-4-7-msoft-float.s: Likewise. * gas/mips/attr-gnu-4-7-odd.l: Likewise. * gas/mips/attr-gnu-4-7-odd.s: Likewise. * gas/mips/attr-gnu-4-7.d: Likewise. * gas/mips/attr-gnu-4-7.l: Likewise. * gas/mips/attr-gnu-4-7.s: Likewise. * gas/mips/attr-none-double.d: Likewise. * gas/mips/attr-none-o32-fp64.d: Likewise. * gas/mips/attr-none-o32-fp64-nooddspreg.d * gas/mips/attr-none-o32-fpxx.d: Likewise. * gas/mips/attr-none-single-float.d: Likewise. * gas/mips/attr-none-soft-float.d: Likewise. * gas/mips/elf_arch_mips32r3.d: Likewise. * gas/mips/elf_arch_mips32r5.d: Likewise. * gas/mips/elf_arch_mips64r3.d: Likewise. * gas/mips/elf_arch_mips64r5.d: Likewise. * gas/mips/li-d.d: Likewise. * gas/mips/li-d.s: Likewise. * gas/mips/module-check-warn.l: Likewise. * gas/mips/module-check-warn.s: Likewise. * gas/mips/module-check.d: Likewise. * gas/mips/module-check.s: Likewise. * gas/mips/module-mfp32.d: Likewise. * gas/mips/module-mfp32.s: Likewise. * gas/mips/module-mfp64.d: Likewise. * gas/mips/module-mfp64.s: Likewise. * gas/mips/module-mfp64-noodd.d: Likewise. * gas/mips/module-mfp64-noodd.s: Likewise. * gas/mips/module-mfpxx.d: Likewise. * gas/mips/module-mfpxx.s: Likewise. * gas/mips/module-msingle-float.d: Likewise. * gas/mips/module-msingle-float.s: Likewise. * gas/mips/module-msoft-float.d: Likewise. * gas/mips/module-msoft-float.s: Likewise. * gas/mips/module-set-mfpxx.d: Likewise. * gas/mips/module-set-mfpxx.s: Likewise. * gas/mips/fpxx-oddfpreg.d: Likewise. * gas/mips/fpxx-oddfpreg.l: Likewise. * gas/mips/fpxx-oddfpreg.s: Likewise. * gas/mips/no-odd-spreg.d: Likewise. * gas/mips/odd-spreg.d: Likewise. * gas/elf/section2.e-mips: Adjust expected output. * gas/mips/attr-gnu-abi-fp-1.d: Likewise. * gas/mips/attr-gnu-abi-msa-1.d: Likewise. * gas/mips/call-nonpic-1.d: Likewise. * gas/mips/elf_arch_mips1.d: Likewise. * gas/mips/elf_arch_mips2.d: Likewise. * gas/mips/elf_arch_mips3.d: Likewise. * gas/mips/elf_arch_mips32.d: Likewise. * gas/mips/elf_arch_mips32r2.d: Likewise. * gas/mips/elf_arch_mips4.d: Likewise. * gas/mips/elf_arch_mips5.d: Likewise. * gas/mips/elf_arch_mips64.d: Likewise. * gas/mips/elf_arch_mips64r2.d: Likewise. * gas/mips/elf_ase_micromips-2.d: Likewise. * gas/mips/elf_ase_micromips.d: Likewise. * gas/mips/elf_ase_mips16-2.d: Likewise. * gas/mips/elf_ase_mips16.d: Likewise. * gas/mips/module-defer-warn1.d: Likewise. * gas/mips/module-override.d: Likewise. * gas/mips/n32-consec.d: Likewise. * gas/mips/nan-2008-1.d: Likewise. * gas/mips/nan-2008-2.d: Likewise. * gas/mips/nan-2008-3.d: Likewise. * gas/mips/nan-2008-4.d: Likewise. * gas/mips/nan-legacy-1.d: Likewise. * gas/mips/nan-legacy-2.d: Likewise. * gas/mips/nan-legacy-3.d: Likewise. * gas/mips/nan-legacy-4.d: Likewise. * gas/mips/nan-legacy-5.d: Likewise. * gas/mips/tmips16-e.d: Likewise. * gas/mips/tmips16-f.d: Likewise. * gas/mips/tmipsel16-e.d: Likewise. * gas/mips/tmipsel16-f.d: Likewise. * gas/testsuite/gas/mips/mips.exp: Add new tests. ld/testsuite/ * ld-mips-elf/abiflags-strip1-ph.d: New. * ld-mips-elf/abiflags-strip2-ph.d: Likewise. * ld-mips-elf/abiflags-strip3-ph.d: Likewise. * ld-mips-elf/abiflags-strip4-ph.d: Likewise. * ld-mips-elf/abiflags-strip5-ph.d: Likewise. * ld-mips-elf/abiflags-strip6-ph.d: Likewise. * ld-mips-elf/abiflags-strip7-ph.d: Likewise. * ld-mips-elf/abiflags-strip8-ph.d: Likewise. * ld-mips-elf/abiflags-strip9-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-0-n32-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-0-n64-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-0-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-06.d: Likewise. * ld-mips-elf/attr-gnu-4-07.d: Likewise. * ld-mips-elf/attr-gnu-4-08.d: Likewise. * ld-mips-elf/attr-gnu-4-1-n32-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-1-n64-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-1-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-16.d: Likewise. * ld-mips-elf/attr-gnu-4-17.d: Likewise. * ld-mips-elf/attr-gnu-4-18.d: Likewise. * ld-mips-elf/attr-gnu-4-2-n32-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-2-n64-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-2-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-26.d: Likewise. * ld-mips-elf/attr-gnu-4-27.d: Likewise. * ld-mips-elf/attr-gnu-4-28.d: Likewise. * ld-mips-elf/attr-gnu-4-3-n32-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-3-n64-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-3-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-36.d: Likewise. * ld-mips-elf/attr-gnu-4-37.d: Likewise. * ld-mips-elf/attr-gnu-4-38.d: Likewise. * ld-mips-elf/attr-gnu-4-4-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-46.d: Likewise. * ld-mips-elf/attr-gnu-4-47.d: Likewise. * ld-mips-elf/attr-gnu-4-48.d: Likewise. * ld-mips-elf/attr-gnu-4-5-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-50.d: Likewise. * ld-mips-elf/attr-gnu-4-52.d: Likewise. * ld-mips-elf/attr-gnu-4-53.d: Likewise. * ld-mips-elf/attr-gnu-4-54.d: Likewise. * ld-mips-elf/attr-gnu-4-55.d: Likewise. * ld-mips-elf/attr-gnu-4-56.d: Likewise. * ld-mips-elf/attr-gnu-4-57.d: Likewise. * ld-mips-elf/attr-gnu-4-58.d: Likewise. * ld-mips-elf/attr-gnu-4-6-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-6.s: Likewise. * ld-mips-elf/attr-gnu-4-60.d: Likewise. * ld-mips-elf/attr-gnu-4-61.d: Likewise. * ld-mips-elf/attr-gnu-4-62.d: Likewise. * ld-mips-elf/attr-gnu-4-63.d: Likewise. * ld-mips-elf/attr-gnu-4-64.d: Likewise. * ld-mips-elf/attr-gnu-4-65.d: Likewise. * ld-mips-elf/attr-gnu-4-66.d: Likewise. * ld-mips-elf/attr-gnu-4-67.d: Likewise. * ld-mips-elf/attr-gnu-4-68.d: Likewise. * ld-mips-elf/attr-gnu-4-7-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-7.s: Likewise. * ld-mips-elf/attr-gnu-4-70.d: Likewise. * ld-mips-elf/attr-gnu-4-71.d: Likewise. * ld-mips-elf/attr-gnu-4-72.d: Likewise. * ld-mips-elf/attr-gnu-4-73.d: Likewise. * ld-mips-elf/attr-gnu-4-74.d: Likewise. * ld-mips-elf/attr-gnu-4-75.d: Likewise. * ld-mips-elf/attr-gnu-4-76.d: Likewise. * ld-mips-elf/attr-gnu-4-77.d: Likewise. * ld-mips-elf/attr-gnu-4-78.d: Likewise. * ld-mips-elf/attr-gnu-4-8.s: Likewise. * ld-mips-elf/attr-gnu-4-81.d: Likewise. * ld-mips-elf/empty.s: Likewise. * ld-mips-elf/attr-gnu-4-00.d: Adjust expected output. * ld-mips-elf/attr-gnu-4-01.d: Likewise. * ld-mips-elf/attr-gnu-4-02.d: Likewise. * ld-mips-elf/attr-gnu-4-03.d: Likewise. * ld-mips-elf/attr-gnu-4-04.d: Likewise. * ld-mips-elf/attr-gnu-4-05.d: Likewise. * ld-mips-elf/attr-gnu-4-10.d: Likewise. * ld-mips-elf/attr-gnu-4-11.d: Likewise. * ld-mips-elf/attr-gnu-4-14.d: Likewise. * ld-mips-elf/attr-gnu-4-15.d: Likewise. * ld-mips-elf/attr-gnu-4-2.s: Likewise. * ld-mips-elf/attr-gnu-4-20.d: Likewise. * ld-mips-elf/attr-gnu-4-22.d: Likewise. * ld-mips-elf/attr-gnu-4-24.d: Likewise. * ld-mips-elf/attr-gnu-4-25.d: Likewise. * ld-mips-elf/attr-gnu-4-3.s: Likewise. * ld-mips-elf/attr-gnu-4-30.d: Likewise. * ld-mips-elf/attr-gnu-4-33.d: Likewise. * ld-mips-elf/attr-gnu-4-34.d: Likewise. * ld-mips-elf/attr-gnu-4-35.d: Likewise. * ld-mips-elf/attr-gnu-4-40.d: Likewise. * ld-mips-elf/attr-gnu-4-41.d: Likewise. * ld-mips-elf/attr-gnu-4-42.d: Likewise. * ld-mips-elf/attr-gnu-4-43.d: Likewise. * ld-mips-elf/attr-gnu-4-44.d: Likewise. * ld-mips-elf/attr-gnu-4-45.d: Likewise. * ld-mips-elf/attr-gnu-4-5.s: Likewise. * ld-mips-elf/attr-gnu-4-51.d: Likewise. * ld-mips-elf/attr-gnu-8-00.d: Likewise. * ld-mips-elf/attr-gnu-8-01.d: Likewise. * ld-mips-elf/attr-gnu-8-02.d: Likewise. * ld-mips-elf/attr-gnu-8-10.d: Likewise. * ld-mips-elf/attr-gnu-8-11.d: Likewise. * ld-mips-elf/attr-gnu-8-20.d: Likewise. * ld-mips-elf/attr-gnu-8-22.d: Likewise. * ld-mips-elf/jalx-2.dd: Likewise. * ld-mips-elf/mips16-pic-1.gd: Likewise. * ld-mips-elf/mips16-pic-2.gd: Likewise. * ld-mips-elf/mips16-pic-3.gd: Likewise. * ld-mips-elf/mips16-pic-4a.gd: Likewise. * ld-mips-elf/multi-got-no-shared.d: Likewise. * ld-mips-elf/nan-2008.d: Likewise. * ld-mips-elf/nan-legacy.d: Rework test. * ld-mips-elf/pic-and-nonpic-3a.gd: Likewise. * ld-mips-elf/pic-and-nonpic-3b.gd: Likewise. * ld-mips-elf/pic-and-nonpic-5b.gd: Likewise. * ld-mips-elf/pic-and-nonpic-6.ld: Likewise. * ld-mips-elf/rel32-n32.d: Likewise. * ld-mips-elf/rel32-o32.d: Likewise. * ld-mips-elf/rel64.d: Likewise. * ld-mips-elf/tls-multi-got-1.r: Likewise. * ld-elf/group.ld: Discard .MIPS.abiflags and .gnu.attributes. * ld-elf/orphan-region.ld: Likewise. * ld-elf/orphan.ld: Likewise. * ld-mips-elf/compressed-plt-1.ld: Likewise. * ld-mips-elf/dyn-sec64.ld: Likewise. * ld-mips-elf/got-dump-1.ld: Likewise. * ld-mips-elf/got-dump-2.ld: Likewise. * ld-mips-elf/got-page-1.ld: Likewise. * ld-mips-elf/mips-dyn.ld: Likewise. * ld-mips-elf/mips-lib.ld: Likewise. * ld-mips-elf/pic-and-nonpic-3a.ld: Likewise. * ld-mips-elf/pic-and-nonpic-3b.ld: Likewise. * ld-mips-elf/pic-and-nonpic-4b.ld: Likewise. * ld-mips-elf/pic-and-nonpic-5b.ld: Likewise. * ld-mips-elf/region1.t: Likewise. * ld-mips-elf/stub-dynsym-1.ld: Likewise. * ld-mips-elf/tls-hidden3.ld: Likewise. * ld-mips-elf/vxworks1.ld: Likewise. * ld-scripts/overlay-size.t: Likewise. * ld-mips-elf/elf-rel-got-n32-embed.d: Remove .MIPS.abiflags from objects. * ld-mips-elf/elf-rel-got-n32.d: Likewise. * ld-mips-elf/elf-rel-got-n64-embed.d: Likewise. * ld-mips-elf/elf-rel-got-n64-linux.d: Likewise. * ld-mips-elf/elf-rel-got-n64.d: Likewise. * ld-mips-elf/elf-rel-xgot-n32.d: Likewise. * ld-mips-elf/elf-rel-xgot-n32-embed.d: Likewise. * ld-mips-elf/elf-rel-xgot-n64.d: Likewise. * ld-mips-elf/elf-rel-xgot-n64-linux.d: Likewise. * ld-mips-elf/elf-rel-xgot-n64-embed.d: Likewise. * ld-mips-elf/mips-elf.exp: Add new tests.
2014-05-07Add MIPS r3 and r5 support.Andrew Bennett1-0/+5
This patch firstly adds support for mips32r3 mips32r5, mips64r3 and mips64r5. Secondly it adds support for the eretnc instruction. ChangeLog: bfd/ * aoutx.h (NAME (aout, machine_type)): Add mips32r3, mips64r3, mips32r5 and mips64r5. * archures.c (bfd_architecture): Likewise. * bfd-in2.h (bfd_architecture): Likewise. * cpu-mips.c (arch_info_struct): Likewise. * elfxx-mips.c (mips_set_isa_flags): Likewise. gas/ * tc-mips.c (ISA_SUPPORTS_MIPS16E): Add mips32r3, mips32r5, mips64r3 and mips64r5. (ISA_HAS_64BIT_FPRS): Likewise. (ISA_HAS_ROR): Likewise. (ISA_HAS_ODD_SINGLE_FPR): Likewise. (ISA_HAS_MXHC1): Likewise. (hilo_interlocks): Likewise. (md_longopts): Likewise. (ISA_HAS_64BIT_REGS): Add mips64r3 and mips64r5. (ISA_HAS_DROR): Likewise. (options): Add OPTION_MIPS32R3, OPTION_MIPS32R5, OPTION_MIPS64R3, and OPTION_MIPS64R5. (mips_isa_rev): Add support for mips32r3, mips32r5, mips64r3 and mips64r5. (md_parse_option): Likewise. (s_mipsset): Likewise. (mips_cpu_info_table): Add entries for mips32r3, mips32r5, mips64r3 and mips64r5. Also change p5600 entry to be mips32r5. * configure.in: Add support for mips32r3, mips32r5, mips64r3 and mips64r5. * configure: Regenerate. * doc/c-mips.texi: Document the -mips32r3, -mips32r5, -mips64r3 and -mips64r5 command line options. * doc/as.texinfo: Likewise. gas/testsuite/ * gas/mips/mips.exp: Add MIPS32r5 tests. Also add the mips32r3, mips32r5, mips64r3 and mips64r5 isas to the testsuite. * gas/mips/r5.s: New test. * gas/mips/r5.d: Likewise. include/opcode/ * mips.h (INSN_ISA_MASK): Updated. (INSN_ISA32R3): New define. (INSN_ISA32R5): New define. (INSN_ISA64R3): New define. (INSN_ISA64R5): New define. (INSN_ISA64, INSN_ISA64R2, INSN_ISA3_32, INSN_ISA3_32R2, INSN_ISA4_32 INSN_ISA4_32R2, INSN_ISA5_32R2): Renumbered. (mips_isa_table): Add entries for mips32r3, mips32r5, mips64r3 and mips64r5. (INSN_UPTO32R3): New define. (INSN_UPTO32R5): New define. (INSN_UPTO64R3): New define. (INSN_UPTO64R5): New define. (ISA_MIPS32R3): New define. (ISA_MIPS32R5): New define. (ISA_MIPS64R3): New define. (ISA_MIPS64R5): New define. (CPU_MIPS32R3): New define. (CPU_MIPS32R5): New define. (CPU_MIPS64R3): New define. (CPU_MIPS64R5): New define. opcodes/ * mips-opc.c (mips_builtin_opcodes): Add MIPS32r5 eretnc instruction. (I34): New define. (I36): New define. (I66): New define. (I68): New define. * mips-dis.c (mips_arch_choices): Add mips32r3, mips32r5, mips64r3 and mips64r5. (parse_mips_dis_option): Update MSA and virtualization support to allow mips64r3 and mips64r5.
2014-05-07Fix an issue with "Rearrange MIPS INSN* masks" patch.Andrew Bennett1-3/+1
This fixes an issue with Mark Shinwell's "Rearrange MIPS INSN* masks" patch (https://sourceware.org/ml/binutils/2007-11/msg00231.html). In the patch the pref instruction had its membership flags changed from I4|I32|G3 to I4_32|G3. Unfortunately G3 was defined as being I4, which made the actual expanded flags as: I4|I32|I4 and therefore the membership flags should have been I4_32. Since the patch was committed G3 was redefined to be I4|EE. This fix just removes I4 from G3 making the expanded membership flags for pref as I4_32|EE. ChangeLog: opcodes/ * mips-opc.c (G3): Remove I4.
2014-04-23Add support for the MIPS eXtended Physical Address (XPA) ASE.Andrew Bennett1-2/+19
ChangeLog: binutils/ * doc/binutils.texi: Document the disassemble MIPS XPA instructions command line option. gas/ * config/tc-mips.c (options): Add OPTION_XPA and OPTION_NO_XPA. (md_longopts): Add xpa and no-xpa command line options. (mips_ases): Add MIPS XPA ASE. (mips_cpu_info_table): Update p5600 entry to allow the XPA ASE. * doc/as.texinfo: Document the MIPS XPA command line options. * doc/c-mips.texi: Document the MIPS XPA command line options, and assembler directives. gas/testsuite/ * gas/mips/mips.exp: Add xpa tests. * gas/mips/xpa.s: New test. * gas/mips/xpa.d: Likewise. include/ * opcode/mips.h (ASE_XPA): New define. opcodes/ * mips-dis.c (mips_arch_choices): Update mips32r2 and mips64r2 to allow the MIPS XPA ASE. (parse_mips_dis_option): Process the -Mxpa option. * mips-opc.c (XPA): New define. (mips_builtin_opcodes): Add MIPS XPA instructions and move the locations of the ctc0 and cfc0 instructions.
2014-03-05Update copyright yearsAlan Modra1-3/+1
2014-03-04opcodes/Richard Sandiford1-66/+66
* mips-opc.c (mips_builtin_opcodes): Move the udi* instructions so that they come after the Loongson extensions.
2013-12-16Range of element index is too large on MIPS MSA element selection instructions.Andrew Bennett1-28/+28
The element index range for the following MIPS MSA instructions: sldi, splati, copy_s, copy_u, insert and insve is 1 bit too large. This patch fixes this issue. ChangeLog: gas/testsuite/gas/mips/ * msa.s: Reduced maximum element index range for sldi, splati, copy_s, copy_u, insert and insve instructions. * msa64.s: Likewise. * micromips@msa.d: Likewise. * micromips@msa64.d: Likewise. * msa.d: Likewise. * msa64.d: Likewise. include/opcode/ * mips.h: Updated description of +o, +u, +v and +w for MIPS and microMIPS. opcodes/ * micromips-opc.c (decode_micromips_operand): Reduced range of +o, +u, +v and +w. (micromips_opcodes): Reduced element index range for sldi, splati, copy_s, copy_u, insert and insve instructions. * opcodes/mips-opc.c (decode_mips_operand): Reduced range of +o, +u, +v and +w. (mips_builtin_opcodes): Reduced element index range for sldi, splati, copy_s, copy_u, insert and insve instructions.
2013-11-192013-11-19 Catherine Moore <clm@codesourcery.com>Catherine Moore1-1/+1
* micromips-opc.c (LM): Define. (micromips_opcodes): Add LM to load instructions. * mips-opc.c (prefe): Add LM attribute.
2013-11-15MIPS/opcodes: Add MFCR and MTCR data dependenciesMaciej W. Rozycki1-2/+2
* mips-opc.c (mips_builtin_opcodes): Add RD_2 to "mfcr" and "mtcr".
2013-11-112013-11-11 Catherine Moore <clm@codesourcery.com>Catherine Moore1-88/+88
gas/ * config/mips/tc-mips.c (convert_reg_type): Use INSN_LOAD_MEMORY instead of INSN_LOAD_MEMORY_DELAY. (reg_needs_delay): Likewise. (insns_between): Likewise. include/ * opcode/mips.h (INSN_LOAD_MEMORY_DELAY): Rename to... (INSN_LOAD_MEMORY): ...this. opcodes/ * mips-dis.c (print_insn_mips): Use INSN_LOAD_MEMORY instead of INSN_LOAD_MEMORY_DELAY. (print_insn_micromips): Likewise. * mips-opc.c (LDD): Remove. (CLD): Include INSN_LOAD_MEMORY. (LM): New. (mips_builtin_opcodes): Use LM instead of LDD. Add LM to load instructions.
2013-10-142013-10-14 Chao-ying Fu <Chao-ying.Fu@imgtec.com>Chao-ying Fu1-0/+562
* micromips-opc.c (decode_micromips_operand): Add +T, +U, +V, +W, +d, +e, +h, +k, +l, +n, +o, +u, +v, +w, +x, +~, +!, +@, +#, +$, +%, +^, +&, +*, +|. (MSA): New define. (MSA64): New define. (micromips_opcodes): Add MSA instructions. * mips-dis.c (msa_control_names): New array. (mips_abi_choice): Add ASE_MSA to mips32r2. Remove ASE_MDMX from mips64r2. Add ASE_MSA and ASE_MSA64 to mips64r2. (parse_mips_dis_option): Handle -Mmsa. (print_reg): Handle cases for OP_REG_MSA and OP_REG_MSA_CTRL. (print_insn_arg): Handle cases for OP_IMM_INDEX and OP_REG_INDEX. (print_mips_disassembler_options): Print -Mmsa. * mips-opc.c (decode_mips_operand): Add +T, +U, +V, +W, +d, +e, +h, +k, +l, +n, +o, +u, +v, +w, +~, +!, +@, +#, +$, +%, +^, +&, +*, +|. (MSA): New define. (MSA64): New define. (mips_builtin_op): Add MSA instructions.
2013-08-19include/opcode/Richard Sandiford1-3/+5
* mips.h (M_DEXT, M_DINS): Delete. opcodes/ * micromips-opc.c (micromips_opcodes): Replace "dext" and "dins" macro entries with "dextm", "dextu", "dinsm" and "dinsu" aliases. Use +H rather than +C for the real "dext". * mips-opc.c (mips_builtin_opcodes): Likewise. gas/ * config/tc-mips.c (report_bad_range, report_bad_field): Delete. (macro): Remove M_DEXT and M_DINS handling. gas/testsuite/ * gas/mips/ext-ill.l, gas/mips/mips64r2-ill.l: Expect DEXT and DINS error messages to have the same form as the EXT and INS ones. * gas/mips/micromips-insn32.d, gas/mips/micromips-noinsn32.d, gas/mips/micromips-trap.d, gas/mips/micromips.d, gas/mips/micromips@mips64r2.d, gas/mips/mips64r2.d: Expect "dext" and "dins" instead of "dextm", "dextu", "dinsm" and "dinsu".
2013-08-19include/opcode/Richard Sandiford1-5/+5
* mips.h (OP_OPTIONAL_REG): New mips_operand_type. (mips_optional_operand_p): New function. opcodes/ * mips-formats.h (OPTIONAL_REG, OPTIONAL_MAPPED_REG): New macros. * micromips-opc.c (decode_micromips_operand): Use OPTIONAL_REG and OPTIONAL_MAPPED_REG. * mips-opc.c (decode_mips_operand): Likewise. * mips16-opc.c (decode_mips16_operand): Likewise. * mips-dis.c (print_insn_arg): Handle OP_OPTIONAL_REG. gas/ * config/tc-mips.c (operand_reg_mask, match_operand): Handle OP_OPTIONAL_REG. (mips_ip, mips16_ip): Use mips_optional_operand_p to check for optional operands.
2013-08-06opcodes/Richard Sandiford1-0/+1
2013-08-06 Jürgen Urban <JuergenUrban@gmx.de> * mips-opc.c (mips_builtin_opcodes): Add a suffixless version of VCLIPW. gas/ 2013-08-06 Jürgen Urban <JuergenUrban@gmx.de> * config/tc-mips.c (match_vu0_suffix_operand): Allow single-channel suffixes to be elided too. (mips_lookup_insn): Don't reject INSN2_VU0_CHANNEL_SUFFIX here. (mips_ip): Assume .xyzw if no VU0 suffix is specified. Allow +N to be omitted too. gas/testsuite/ 2013-08-06 Jürgen Urban <JuergenUrban@gmx.de> * gas/mips/r5900-error-vu0.s, gas/mips/r5900-error-vu0.l, gas/mips/r5900-full-vu0.s, gas/mips/r5900-full-vu0.d: Allow single-channel suffixes to be elided.
2013-08-04include/opcode/Richard Sandiford1-16/+171
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de> Richard Sandiford <rdsandiford@googlemail.com> * mips.h: Document new VU0 operand characters. (OP_VU0_SUFFIX, OP_VU0_MATCH_SUFFIX): New mips_operand_types. (OP_REG_VF, OP_REG_VI, OP_REG_R5900_I, OP_REG_R5900_Q, OP_REG_R5900_R) (OP_REG_R5900_ACC): New mips_reg_operand_types. (INSN2_VU0_CHANNEL_SUFFIX): New macro. (mips_vu0_channel_mask): Declare. opcodes/ 2013-08-04 Jürgen Urban <JuergenUrban@gmx.de> Richard Sandiford <rdsandiford@googlemail.com> * mips-dis.c (print_reg): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I, OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC. (print_vu0_channel): New function. (print_insn_arg): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX. (print_insn_args): Handle '#'. (print_insn_mips): Handle INSN2_VU0_CHANNEL_SUFFIX. * mips-opc.c (mips_vu0_channel_mask): New constant. (decode_mips_operand): Handle new VU0 operand types. (VU0, VU0CH): New macros. (mips_builtin_opcodes): Add VU0 opcodes. Use "+7" rather than "E" for LQC2 and SQC2. Use "+9" rather than "G" for EE CFC2 and CTC2. Use "+6" rather than "G" for QMFC2 and QMTC2. gas/ 2013-08-04 Jürgen Urban <JuergenUrban@gmx.de> Richard Sandiford <rdsandiford@googlemail.com> * config/tc-mips.c (MAX_OPERANDS): Bump to 6. (RWARN): Bump to 0x8000000. (RTYPE_VI, RTYPE_VF, RTYPE_R5900_I, RTYPE_R5900_Q, RTYPE_R5900_R) (RTYPE_R5900_ACC): New register types. (RTYPE_MASK): Include them. (R5900_I_NAMES, R5900_Q_NAMES, R5900_R_NAMES, R5900_ACC_NAMES): New macros. (reg_names): Include them. (mips_parse_register_1): New function, split out from... (mips_parse_register): ...here. Add a channels_ptr parameter. Look for VU0 channel suffixes when nonnull. (reg_lookup): Update the call to mips_parse_register. (mips_parse_vu0_channels): New function. (OT_CHANNELS, OT_DOUBLE_CHAR): New mips_operand_token_types. (mips_operand_token): Add a "channels" field to the union. Extend the comment above "ch" to OT_DOUBLE_CHAR. (mips_parse_base_start): Match -- and ++. Handle channel suffixes. (mips_parse_argument_token): Handle channel suffixes here too. (validate_mips_insn): Handle INSN2_VU0_CHANNEL_SUFFIX. Ignore OP_VU0_MATCH_SUFFIX when calculating the used bits. Handle '#' formats. (md_begin): Register $vfN and $vfI registers. (operand_reg_mask): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX. (convert_reg_type): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I, OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC. (match_vu0_suffix_operand): New function. (match_operand): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX. (macro): Use "+7" rather than "E" for LDQ2 and STQ2. (mips_lookup_insn): New function. (mips_ip): Use it. Allow "+K" operands to be elided at the end of an instruction. Handle '#' sequences. gas/testsuite/ 2013-08-04 Jürgen Urban <JuergenUrban@gmx.de> * gas/mips/r5900-vu0.d: Expect $vfN and $viN instead of numeric coprocessor registers. * gas/mips/r5900-all-vu0.s, gas/mips/r5900-all-vu0.d, gas/mips/r5900-full-vu0.s, gas/mips/r5900-full-vu0.d, gas/mips/r5900-error-vu0.s, gas/mips/r5900-error-vu0.l: New tests. * gas/mips/mips.exp: Run them.
2013-08-01include/opcode/Richard Sandiford1-1706/+1698
* mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01opcodes/Richard Sandiford1-11/+11
* mips-opc.c (mips_builtin_opcodes): Remove WR_* and RD_* flags for operands that are hard-coded to $0. * micromips-opc.c (micromips_opcodes): Likewise.
2013-08-01opcodes/Richard Sandiford1-2/+2
* mips-opc.c (mips_builtin_opcodes): Use WR_31 rather than WR_d for the single-operand forms of JALR and JALR.HB. * micromips-opc.c (micromips_opcodes): Likewise JALR, JALRS, JALR.HB and JALRS.HB.
2013-08-01opcodes/Richard Sandiford1-31/+31
* mips-opc.c (mips_builtin_opcodes): Add FP_D to VR5400 vector instructions. Fix them to use WR_MACC instead of WR_CC and add missing RD_MACCs.
2013-07-25opcodes/Richard Sandiford1-4/+4
2013-07-25 Aaro Koskinen <aaro.koskinen@iki.fi> PR gas/15220 * mips-opc.c (mips_builtin_opcodes): Fix wrong opcodes for Loongson 2F madd.ps, msub.ps, nmadd.ps and nmsub.ps. gas/testsuite/ * gas/mips/loongson-2f.d: Fix expected output for madd.ps, msub.ps, nmadd.ps and nmsub.ps.
2013-07-14opcodes/Richard Sandiford1-1993/+1993
* Makefile.am (mips-opc.lo, micromips-opc.lo, mips16-opc.lo): Remove special rules. * Makefile.in: Regenerate. * mips-opc.c, micromips-opc.c, mips16-opc.c: Explicitly initialize all fields. Reformat.
2013-07-14include/opcode/Richard Sandiford1-0/+117
* mips.h (mips_operand_type, mips_reg_operand_type): New enums. (mips_operand, mips_int_operand, mips_mapped_int_operand) (mips_msb_operand, mips_reg_operand, mips_reg_pair_operand) (mips_pcrel_operand): New structures. (mips_insert_operand, mips_extract_operand, mips_signed_operand) (mips_decode_int_operand, mips_decode_pcrel_operand): New functions. (decode_mips_operand, decode_micromips_operand): Declare. opcodes/ * mips-formats.h: New file. * mips-opc.c: Include mips-formats.h. (reg_0_map): New static array. (decode_mips_operand): New function. * micromips-opc.c: Remove <stdio.h> include. Include mips-formats.h. (reg_0_map, reg_28_map, reg_29_map, reg_31_map, reg_m16_map) (reg_mn_map, reg_q_map, reg_h_map1, reg_h_map2, int_b_map) (int_c_map): New static arrays. (decode_micromips_operand): New function. * mips-dis.c (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_d_map, micromips_to_32_reg_e_map) (micromips_to_32_reg_f_map, micromips_to_32_reg_g_map) (micromips_to_32_reg_h_map1, micromips_to_32_reg_h_map2) (micromips_to_32_reg_l_map, micromips_to_32_reg_m_map) (micromips_to_32_reg_n_map, micromips_to_32_reg_q_map) (micromips_imm_b_map, micromips_imm_c_map): Delete. (print_reg): New function. (mips_print_arg_state): New structure. (init_print_arg_state, print_insn_arg): New functions. (print_insn_args): Change interface and use mips_operand structures. Delete GET_OP_S. Move GET_OP definition to... (print_insn_mips): ...here. Update the call to print_insn_args. (print_insn_micromips): Use print_insn_args. gas/ * config/tc-mips.c (validate_mips_insn): Move further up file. Add insn_bits and decode_operand arguments. Use the mips_operand fields to work out which bits an operand occupies. Detect double definitions. (validate_micromips_insn): Move further up file. Call into validate_mips_insn.
2013-07-14opcodes/Richard Sandiford1-3/+3
* mips-opc.c (mips_builtin_opcodes): Use "S,T" rather than "V,T" for ADDA.S, MULA.S and SUBA.S.
2013-07-07include/opcode/Richard Sandiford1-40/+9
* mips.h (M_ACLR_OB, M_ASET_OB, M_CACHE_OB, M_CACHEE_OB, M_L_DOB) (M_LB_A, M_LBE_OB, M_LBU_A, M_LBUE_OB, M_LD_A, M_LD_OB, M_LDC2_OB) (M_LDL_OB, M_LDM_OB, M_LDP_OB, M_LDR_OB, M_LH_A, M_LHE_OB, M_LHU_A) (M_LHUE_OB, M_LL_OB, M_LLD_OB, M_LLE_OB, M_LS_A, M_LW_A, M_LWE_OB) (M_LWC0_A, M_LWC1_A, M_LWC2_A, M_LWC2_OB, M_LWC3_A, M_LWL_A, M_LWL_OB) (M_LWLE_OB, M_LWM_OB, M_LWP_OB, M_LWR_A, M_LWR_OB, M_LWRE_OB, M_LWU_OB) (M_PREF_OB, M_PREFE_OB, M_S_DOB, M_SAA_OB, M_SAAD_OB, M_SC_OB) (M_SCD_OB, M_SCE_OB, M_SD_A, M_SD_OB, M_SDC2_OB, M_SDL_OB, M_SDM_OB) (M_SDP_OB, M_SDR_OB, M_SB_A, M_SBE_OB, M_SH_A, M_SHE_OB, M_SW_A) (M_SWE_OB, M_SWC0_A, M_SWC1_A, M_SWC2_A, M_SWC2_OB, M_SWC3_A, M_SWL_A) (M_SWL_OB, M_SWLE_OB, M_SWM_OB, M_SWP_OB, M_SWR_A, M_SWR_OB, M_SWRE_OB) (M_ULD, M_ULH, M_ULHU, M_ULW, M_USH, M_USW, M_USD): Delete. (M_ULD_A, M_ULH_A, M_ULHU_A, M_ULW_A, M_USH_A, M_USW_A, M_USD_A): Rename to... (M_ULD_AB, M_ULH_AB, M_ULHU_AB, M_ULW_AB, M_USH_AB, M_USW_AB) (M_USD_AB): ...these. opcodes/ * mips-opc.c (mips_builtin_opcodes): Remove o(b) macros. Move LD and SD A(B) macros up. * micromips-opc.c (micromips_opcodes): Likewise. gas/ * config/tc-mips.c (gprel16_reloc_p): New function. (macro_read_relocs): Assume BFD_RELOC_LO16 if all relocs are BFD_RELOC_UNUSED. (offset_high_part, small_offset_p): New functions. (nacro): Use them. Remove *_OB and *_DOB cases. For single- register load and store macros, handle the 16-bit offset case first. If a 16-bit offset is not suitable for the instruction we're generating, load it into the temporary register using ADDRESS_ADDI_INSN. Make the M_LI_DD code fall through into the M_L_DAB code once the address has been constructed. For double load and store macros, again handle the 16-bit offset case first. If the second register cannot be accessed from the same high part as the first, load it into AT using ADDRESS_ADDI_INSN. Fix the handling of LD in cases where the first register is the same as the base. Also handle the case where the offset is not 16 bits and the second register cannot be accessed from the same high part as the first. For unaligned loads and stores, fuse the offbits == 12 and old "ab" handling. Apply this handling whenever the second offset needs a different high part from the first. Construct the offset using ADDRESS_ADDI_INSN where possible, for offbits == 16 as well as offbits == 12. Use offset_reloc when constructing the individual loads and stores. (mips_ip): Set up imm_expr, imm2_expr, offset_expr, imm_reloc and offset_reloc before matching against a particular opcode. Handle elided 'A' constants. Allow 'A' constants to use relocation operators. gas/testsuite/ * gas/mips/ldstla-32.d: Avoid "lui at,0x0" sequences for truncated constants. * gas/mips/ldstla-32-shared.d: Likewise. * gas/mips/mcu.d: Use ADDIU in preference to LI+ADDU when adding 16-bit constants to the base. * gas/mips/micromips@mcu.d: Likewise. * gas/mips/micromips@cache.d: Likewise. * gas/mips/micromips@pref.d: Likewise. * gas/mips/micromips.d, gas/mips/micromips-insn32.d, gas/mips/micromips-noinsn32.d, gas/mips/micromips-trap.d: Likewise. Allow the full 16-bit offset range to be used for SB, LB and LBU in USH and ULH sequences. Fix the expected output for LD and SD when the two LW and SW offsets need different high parts. * gas/mips/eva.s: Test PREFE with relocation operators. * gas/mips/eva.d: Use ADDIU in preference to LI+ADDU for 16-bit constants. Update after eva.s change. * gas/mips/micromips@eva.d: Likewise. * gas/mips/ld-reloc.s, gas/mips/ld-reloc.d, gas/mips/l_d-reloc.s, gas/mips/l_d-reloc.d, gas/mips/ulw-reloc.s, gas/mips/ulw-reloc.d, gas/mips/micromips@ulw-reloc.d, gas/mips/ulh-reloc.s, gas/mips/ulh-reloc.d: New tests. * gas/mips/mips.exp: Run them.
2013-07-07include/opcode/Richard Sandiford1-59/+21
* mips.h: Remove documentation of "[" and "]". Update documentation of "k" and the MDMX formats. opcodes/ * mips-opc.c (mips_builtin_opcodes): Use "Q" for the INSN_5400 MDMX-like instructions. * mips-dis.c (print_insn_arg): Use "$f" rather than "$v" when printing "Q" operands for INSN_5400 instructions. gas/ * config/tc-mips.c (validate_mips_insn): Remove "[" and "]" handling. (mips_ip): Likewise. Do not set is_mdmx for INSN_5400 instructions. Check constraints on the VR5400 RZU.OB, SLL.OB and SRL.OB instructions. gas/testsuite/ * gas/mips/vr5400-ill.s, gas/mips/vr5400-ill.l: New test. * gas/mips/mips.exp: Run it.
2013-07-07include/opcode/Richard Sandiford1-4/+4
* mips.h: Update documentation of "+s" and "+S". opcodes/ * mips-opc.c (mips_builtin_opcodes): Use "+s" for "cins32" and "+S" for "cins". * mips-dis.c (print_mips_arg): Update "+s" and "+S" comments. Combine cases. gas/ * config/tc-mips.c (mips_ip): Preserve the real bit number for "+p". Require the msb to be <= 31 for "+s". Check that the size is <= 31 for both "+s" and "+S".
2013-07-07include/opcode/Richard Sandiford1-1/+1
* mips.h: Document "+i". opcodes/ * mips-opc.c (mips_builtin_opcodes): Use "+i" rather than "a" for "jalx". * mips16-opc.c (mips16_opcodes): Likewise. * micromips-opc.c (micromips_opcodes): Likewise. * mips-dis.c (print_insn_args, print_mips16_insn_arg) (print_insn_mips16): Handle "+i". (print_insn_micromips): Likewise. Conditionally preserve the ISA bit for "a" but not for "+i". gas/ * config/tc-mips.c (validate_mips_insn, validate_micromips_insn): (mips_ip, mips16_ip): Handle "+i".
2013-07-07include/opcode/Richard Sandiford1-10/+0
* mips.h: Remove documentation of "+D" and "+T". opcodes/ * mips-opc.c (mips_builtin_opcodes): Remove "+D" and "+T" entries. * micromips-opc.c (micromips_opcodes): Likewise. * mips-dis.c (print_insn_args, print_insn_micromips): Remove "+D" and "+T" handling. Check for a "0" suffix when deciding whether to use coprocessor 0 names. In that case, also check for ",H" selectors. gas/ * config/tc-mips.c (validate_mips_insn, validate_micromips_insn) (mips_ip): Remove "+D" and "+T" handling. gas/testsuite/ * gas/mips/lb.d, gas/mips/sb.d: Use coprocessor register names for LWC0 and SWC0.
2013-06-172013-06-17 Catherine Moore <clm@codesourcery.com>Catherine Moore1-0/+57
Maciej W. Rozycki <macro@codesourcery.com> Chao-Ying Fu <fu@mips.com> gas/testsuite/ * gas/mips/mips.exp: Run new tests. * gas/mips/eva.d: New. * gas/mips/eva.s: New. * gas/mips/micromips@eva.d: New. gas/ * config/tc-mips.c (mips_set_options): Add ase_eva. (mips_set_options mips_opts): Add ase_eva. (file_ase_eva): Declare. (ISA_SUPPORTS_EVA_ASE): Define. (IS_SEXT_9BIT_NUM): Define. (MIPS_CPU_ASE_EVA): Define. (is_opcode_valid): Add support for ase_eva. (macro_build): Likewise. (macro): Likewise. (validate_mips_insn): Likewise. (validate_micromips_insn): Likewise. (mips_ip): Likewise. (options): Add OPTION_EVA and OPTION_NO_EVA. (md_longopts): Add -meva and -mno-eva. (md_parse_option): Process new options. (mips_after_parse_args): Check for valid EVA combinations. (s_mipsset): Likewise. include/ * opcode/mips.h (OP_SH_EVAOFFSET): Define. (OP_MASK_EVAOFFSET): Define. (INSN_ASE_MASK): Delete. (ASE_EVA): Define. (M_CACHEE_AB, M_CACHEE_OB): New. (M_LBE_OB, M_LBE_AB): New. (M_LBUE_OB, M_LBUE_AB): New. (M_LHE_OB, M_LHE_AB): New. (M_LHUE_OB, M_LHUE_AB): New. (M_LLE_AB, M_LLE_OB): New. (M_LWE_OB, M_LWE_AB): New. (M_LWLE_AB, M_LWLE_OB): New. (M_LWRE_AB, M_LWRE_OB): New. (M_PREFE_AB, M_PREFE_OB): New. (M_SCE_AB, M_SCE_OB): New. (M_SBE_OB, M_SBE_AB): New. (M_SHE_OB, M_SHE_AB): New. (M_SWE_OB, M_SWE_AB): New. (M_SWLE_AB, M_SWLE_OB): New. (M_SWRE_AB, M_SWRE_OB): New. (MICROMIPSOP_SH_EVAOFFSET): Define. (MICROMIPSOP_MASK_EVAOFFSET): Define. opcodes/ * micromips-opc.c (EVA): Define. (TLBINV): Define. (micromips_opcodes): Add EVA opcodes. * mips-dis.c (mips_arch_choices): Update for ASE_EVA. (print_insn_args): Handle EVA offsets. (print_insn_micromips): Likewise. * mips-opc.c (EVA): Define. (TLBINV): Define. (mips_builtin_opcodes): Add EVA opcodes.
2013-06-08gas/Richard Sandiford1-721/+721
2013-06-08 Catherine Moore <clm@codesourcery.com> * config/tc-mips.c (is_opcode_valid): Build ASE mask. (is_opcode_valid_16): Pass ase value to opcode_is_member. (append_insn): Change INSN_xxxx to ASE_xxxx. include/ 2013-06-08 Catherine Moore <clm@codesourcery.com> * opcode/mips.h (mips_opcode): Add ase field. (INSN_ASE_MASK): Delete. (INSN_DSP): Rename to ASE_DSP. Provide new value. (INSN_DSPR2): Rename to ASE_DSPR2. Provide new value. (INSN_MCU): Rename to ASE_MCU. Provide new value. (INSN_MDMX): Rename to ASE_MDMX. Provide new value. (INSN_MIPS3d): Rename to ASE_MIPS3D. Provide new value. (INSN_MT): Rename to ASE_MT. Provide new value. (INSN_SMARTMIPS): Rename to ASE_SMARTMIPS. Provide new value. (INSN_VIRT): Rename to ASE_VIRT. Provide new value. (INSN_VIRT64): Rename to ASE_VIRT64. Provide new value. (opcode_is_member): Add ase argument. Check ase. opcodes/ 2013-06-08 Catherine Moore <clm@codesourcery.com> Richard Sandiford <rdsandiford@googlemail.com> * micromips-opc.c (D32, D33, MC): Update definitions. (micromips_opcodes): Initialize ase field. * mips-dis.c (mips_arch_choice): Add ase field. (mips_arch_choices): Initialize ase field. (set_default_mips_dis_options): Declare and setup mips_ase. * mips-opc.c (M3D, SMT, MX, IVIRT, IVIRT64, D32, D33, D64, MT32, MC): Update definitions. (mips_builtin_opcodes): Initialize ase field.
2013-05-22include/opcode/Richard Sandiford1-7/+20
2013-05-22 Jürgen Urban <JuergenUrban@gmx.de> * mips.h (M_LQC2_AB, M_SQC2_AB): New macros. opcodes/ 2013-05-22 Jürgen Urban <JuergenUrban@gmx.de> * mips-opc.c (mips_builtin_opcodes): Add R5900 VU0 instructions. gas/ 2013-05-22 Jürgen Urban <JuergenUrban@gmx.de> * config/tc-mips.c (macro): Handle M_LQC2_AB and M_SQC2_AB. gas/testsuite/ 2013-05-22 Jürgen Urban <JuergenUrban@gmx.de> * gas/mips/r5900-full.s, gas/mips/r5900-full.d: Add tests for LQ and SQ macros. * gas/mips/r5900-vu0.s, gas/mips/r5900-vu0.d: New test. * gas/mips/mips.exp: Run it.
2013-05-10binutils/ChangeLog:Andrew Pinski1-1/+25
* doc/binutils.texi: Document -Mvirt disassembler option. gas/ChangeLog: * config/tc-mips.c (struct mips_set_options): New ase_virt field. (mips_opts): Update for the new field. (file_ase_virt): New variable. (ISA_SUPPORTS_VIRT_ASE): New macro. (ISA_SUPPORTS_VIRT64_ASE): New macro. (MIPS_CPU_ASE_VIRT): New define. (is_opcode_valid): Handle ase_virt. (macro_build): Handle "+J". (validate_mips_insn): Likewise. (mips_ip): Likewise. (enum options): Add OPTION_VIRT and OPTION_NO_VIRT. (md_longopts): Add mvirt and mnovirt (md_parse_option): Handle OPTION_VIRT and OPTION_NO_VIRT. (mips_after_parse_args): Handle ase_virt field. (s_mipsset): Handle "virt" and "novirt". (mips_elf_final_processing): Add a comment about virt ASE might need a new flag. (md_show_usage): Print out the usage of -mvirt and mno-virt options. * doc/c-mips.texi: Document -mvirt and -mno-virt. Document ".set virt" and ".set novirt". gas/testsuite/ChangeLog: * gas/mips/mips.exp: Run virt and virt64 testcases. * gas/mips/virt.d: New file. * gas/mips/virt.s: New file. * gas/mips/virt64.d: New file. * gas/mips/virt64.s: New file. include/opcode/ChangeLog: * mips.h (OP_MASK_CODE10): Correct definition. (OP_SH_CODE10): Likewise. Add a comment that "+J" is used now for OP_*CODE10. (INSN_ASE_MASK): Update. (INSN_VIRT): New macro. (INSN_VIRT64): New macro opcodes/ChangeLog: * mips-dis.c (mips_arch_choices): Add INSN_VIRT to mips32r2 . Add INSN_VIRT and INSN_VIRT64 to mips64r2. (parse_mips_dis_option): Handle the virt option. (print_insn_args): Handle "+J". (print_mips_disassembler_options): Print out message about virt64. * mips-opc.c (IVIRT): New define. (IVIRT64): New define. (mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0, tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp VIRT instructions. Move rfe to the bottom as it conflicts with tlbgp.
2013-02-09gas/Richard Sandiford1-13/+13
2013-02-09 Jürgen Urban <JuergenUrban@gmx.de> * config/tc-mips.c (CPU_HAS_LDC1_SDC1): New macro. (macro): Use it. Assert that trunc.w.s is not used for r5900. opcodes/ 2013-02-09 Jürgen Urban <JuergenUrban@gmx.de> * mips-opc.c (mips_builtin_opcodes): Enable l.d and s.d macros for single-float. Disable ll, lld, sc and scd for EE. Disable the trunc.w.s macro for EE. gas/testsuite/ 2013-02-09 Jürgen Urban <JuergenUrban@gmx.de> * gas/mips/24k-triple-stores-2.d, gas/mips/24k-triple-stores-2.s, gas/mips/micromips@24k-triple-stores-2.d: Move "sc" tests to... * gas/mips/24k-triple-stores-2-llsc.d, gas/mips/24k-triple-stores-2-llsc.s, gas/mips/micromips@24k-triple-stores-2-llsc.d: ...these new tests. * gas/mips/r5900-full.d, gas/mips/r5900-full.s: Verify that the MIPS ISA level can be upgraded to support ll, sc, lld and scd. * gas/mips/l_d-single.d, gas/mips/s_d-single.d, gas/mips/r5900-nollsc.l, gas/mips/r5900-nollsc.s: New tests. * gas/mips/mips.exp: Update accordingly. Add "nollsc" to r5900 properties.
2013-01-04 * archures.c: Add support for MIPS r5900Nick Clifton1-138/+295
* bfd-in2.h: Add support for MIPS r5900 * config.bfd: Add support for Sony Playstation 2 * cpu-mips.c: Add support for MIPS r5900 * elfxx-mips.c: Add support for MIPS r5900 (extension of r4000) * config/tc-mips.c: Add support for MIPS r5900 Add M_LQ_AB and M_SQ_AB to support large values for instructions lq and sq. * config/tc-mips.c (can_swap_branch_p, get_append_method): Detect some conditional short loops to fix a bug on the r5900 by NOP in the branch delay slot. * config/tc-mips.c (M_MUL): Support 3 operands in multu on r5900. * config/tc-mips.c (M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I. * config/tc-mips.c (s_mipsset): Force 32 bit floating point on r5900. * configure.in: Detect CPU type when target string contains r5900 (e.g. mips64r5900el-linux-gnu). * config/tc-mips.c (mips_ip): Check parameter range of instructions mfps and mtps on r5900. * elf/mips.h: Add MIPS machine variant number for r5900 which is compatible with old Playstation 2 software. * opcode/mips.h: Add support for r5900 instructions including lq and sq. * configure.tgt: Support ELF files for Sony Playstation 2 (for ps2dev and ps2sdk). * emulparams/elf32lr5900n32.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI n32. * emulparams/elf32lr5900.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI o32. * Makefile.am: Add linker scripts for Sony Playstation 2 ELF files. * opcodes/mips-dis.c: Add names for CP0 registers of r5900. * opcodes/mips-opc.c: Add M_SQ_AB and M_LQ_AB to support larger range for instructions sq and lq. * opcodes/mips-opc.c: Add support for MIPS r5900 CPU. Add support for 128 bit MMI (Multimedia Instructions). Add support for EE instructions (Emotion Engine). Disable unsupported floating point instructions (64 bit and undefined compare operations). Enable instructions of MIPS ISA IV which are supported by r5900. Disable 64 bit co processor instructions. Disable 64 bit multiplication and division instructions. Disable instructions for co-processor 2 and 3, because these are not supported (preparation for later VU0 support (Vector Unit)). Disable cvt.w.s because this behaves like trunc.w.s and the correct execution can't be ensured on r5900. Add trunc.w.s using the opcode encoding of cvt.w.s on r5900. This will confuse less developers and compilers.
2012-08-13 include/opcode/Maciej W. Rozycki1-91/+91
* mips.h (mips_opcode): Add the exclusions field. (OPCODE_IS_MEMBER): Remove macro. (cpu_is_member): New inline function. (opcode_is_member): Likewise. opcodes/ * micromips-opc.c (micromips_opcodes): Update comment. * mips-opc.c (mips_builtin_opcodes): Likewise. Mark coprocessor instructions for IOCT as appropriate. * mips-dis.c (print_insn_mips): Replace OPCODE_IS_MEMBER with opcode_is_member. * configure.in: Substitute NO_WMISSING_FIELD_INITIALIZERS with the result of a check for the -Wno-missing-field-initializers GCC option. * Makefile.am (NO_WMISSING_FIELD_INITIALIZERS): New variable. (mips-opc.lo): Pass $(NO_WMISSING_FIELD_INITIALIZERS) to compilation. (mips16-opc.lo): Likewise. (micromips-opc.lo): Likewise. * aclocal.m4: Regenerate. * configure: Regenerate. * Makefile.in: Regenerate. gas/ * config/tc-mips.c (NO_ISA_COP, COP_INSN): Remove macros. (is_opcode_valid): Remove coprocessor instruction exclusions. Replace OPCODE_IS_MEMBER with opcode_is_member. (is_opcode_valid_16): Replace OPCODE_IS_MEMBER with opcode_is_member. (macro): Remove coprocessor instruction exclusions.
generated by cgit v1.1 at 2024-12-27 01:54:53 +0000