aboutsummaryrefslogtreecommitdiff
path: root/opcodes/mips-opc.c
AgeCommit message (Collapse)AuthorFilesLines
2007-11-29 bfd/Mark Shinwell1-36/+271
* archures.c (bfd_mach_mips_loongson_2e): New. (bfd_mach_mips_loongson_2f): New. * bfd-in2.h (bfd_mach_mips_loongson_2e): New. (bfd_mach_mips_loongson_2f): New. * cpu-mips.c: Add I_loongson_2e and I_loongson_2f to anonymous enum. (arch_info_struct): Add Loongson-2E and Loongson-2F entries. * elfxx-mips.c (_bfd_elf_mips_mach): Handle Loongson-2E and Loongson-2F flags. (mips_set_isa_flags): Likewise. (mips_mach_extensions): Add Loongson-2E and Loongson-2F entries. binutils/ * readelf.c (get_machine_flags): Handle Loongson-2E and -2F flags. gas/ * config/tc-mips.c (mips_cpu_info_table): Add loongson2e and loongson2f entries. * doc/c-mips.texi: Document -march=loongson{2e,2f} options. gas/testsuite/ * gas/mips/mips.exp: Add loongson-2e and -2f tests. * gas/mips/loongson-2e.d: New. * gas/mips/loongson-2e.s: New. * gas/mips/loongson-2f.d: New. * gas/mips/loongson-2f.s: New. include/elf/ * mips.h (E_MIPS_MACH_LS2E): New. (E_MIPS_MACH_LS2F): New. include/opcode/ * mips.h (INSN_LOONGSON_2E): New. (INSN_LOONGSON_2F): New. (CPU_LOONGSON_2E): New. (CPU_LOONGSON_2F): New. (OPCODE_IS_MEMBER): Update for Loongson-2E and -2F flags. opcodes/ * mips-dis.c (mips_arch_choices): Add Loongson-2E and -2F entries. * mips-opc.c (IL2E): New. (IL2F): New. (mips_builtin_opcodes): Add Loongson-2E and -2F instructions. Allow movz and movn for Loongson-2E and -2F. Add movnz entry. Move coprocessor encodings to the end of the table. Allow certain MIPS V .ps instructions on the Loongson-2E and -2F.
2007-11-29 include/opcode/Mark Shinwell1-138/+143
* mips.h (INSN_ISA*): Redefine certain values as an enumeration. Update comments. (mips_isa_table): New. (ISA_MIPS*): Redefine to match enumeration. (OPCODE_IS_MEMBER): Modify to correctly test new INSN_ISA* values. opcodes/ * mips-opc.c (I3_32, I3_33, I4_32, I4_33, I5_33): New. (mips_builtin_opcodes): Use these new I* values.
2007-10-04opcodes/David Daney1-1/+1
2007-10-04 David Daney <ddaney@avtrex.com> * mips-opc.c (mips_builtin_opcodes): Mark lwxc1 as working on FP_S registers. gas/testsuite/ 2007-10-04 David Daney <ddaney@avtrex.com> * gas/mips/odd-float.d, gas/mips/odd-float.s: New test. * gas/mips/mips.exp: Run it.
2007-07-05Change source files over to GPLv3.Nick Clifton1-13/+14
2007-02-20 [ gas/ChangeLog ]Thiemo Seufer1-0/+55
* config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2, ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support. (macro_build): Add case '2'. (macro): Expand M_BALIGN to nop, packrl.ph or balign. (validate_mips_insn): Add support for balign instruction. (mips_ip): Handle DSP R2 instructions. Support balign instruction. (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE, md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2 command line options. (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives. (md_show_usage): Add -mdspr2 and -mno-dspr2 help output. * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2, .set dspr2, .set nodspr2. [ gas/testsuite/ChangeLog ] * gas/mips/mips32-dspr2.s, gas/mips/mips32-dspr2.d: New test for DSP R2. * gas/mips/mips.exp: Run new test. [ include/opcode/Changelog ] * mips.h (OP_SH_BP, OP_MASK_BP): Add support for balign instruction. (INSN_DSPR2): Add flag for DSP R2 instructions. (M_BALIGN): New macro. [ opcodes/ChangeLog ] * mips-dis.c (mips_arch_choices): Add DSP R2 support. (print_insn_args): Add support for balign instruction. * mips-opc.c (D33): New shortcut for DSP R2 instructions. (mips_builtin_opcodes): Add DSP R2 instructions. [ sim/mips/ChangeLog ] * Makefile.in (IGEN_INCLUDE): Add dsp2.igen. * configure.ac (mips*-sde-elf*, mipsisa32r2*-*-*, mipsisa64r2*-*-*): Add dsp2 to sim_igen_machine. * configure: Regenerate. * dsp.igen (do_ph_op): Add MUL support when op = 2. (do_ph_mulq): New function to support mulq_rs.ph and mulq_s.ph. (mulq_rs.ph): Use do_ph_mulq. (MFHI, MFLO, MTHI, MTLO): Move these instructions to mips.igen. * mips.igen: Add dsp2 model and include dsp2.igen. (MFHI, MFLO, MTHI, MTLO): Extend these instructions for for *mips32r2, *mips64r2, *dsp. (MADD, MADDU, MSUB, MSUBU, MULT, MULTU): Extend these instructions for *mips32r2, *mips64r2, *dsp2. * dsp2.igen: New file for MIPS DSP REV 2 ASE. [ sim/testsuite/sim/mips/ChangeLog ] * basic.exp: Run the dsp2 test. * utils-dsp.inc (dspckacc_astio, dspck_tsimm): New macro. * mips32-dsp2.s: New test.
2006-06-06 [ gas/ChangeLog ]Thiemo Seufer1-1/+130
* config/tc-mips.c (ISA_SUPPORTS_DSP64): New macro. (CPU_HAS_MIPS3D, CPU_HAS_MDMX, CPU_HAS_DSP, CPU_HAS_MT): Delete. (macro_build): Update comment. (mips_ip): Allow DSP64 instructions for MIPS64R2. (mips_after_parse_args): Remove uses of CPU_HAS_MIPS3D and CPU_HAS_MDMX. (mips_cpu_info): Fix formatting. Add MIPS_CPU_ASE_MIPS3D and MIPS_CPU_ASE_MDMX flags for sb1. [ gas/testsuite/ChangeLog ] * gas/mips/mips64-dsp.s, gas/mips/mips64-dsp.d: New DSP64 tests. * gas/mips/mips.exp: Run DSP64 tests. [ opcodes/ChangeLog ] * mips-dis.c: Disassemble DSP64 instructions for MIPS64R2. * mips-opc.c: Add DSP64 instructions.
2006-05-05 [ gas/ChangeLog ]Thiemo Seufer1-0/+1
* config/tc-mips.c (macro_build): Add case 'k' to handle cache instruction. (macro): Add new case M_CACHE_AB. [ opcodes/ChangeLog ] * mips-opc.c: Add macro for cache instruction. [ include/opcode/ChangeLog ] * mips.h (enum): Add macro M_CACHE_AB.
2006-05-04[ gas/testsuite/ChangeLog ]Thiemo Seufer1-101/+131
2006-05-04 Thiemo Seufer <ths@mips.com> Nigel Stephens <nigel@mips.com> * gas/mips/mips.exp: Run mips32-dsp tests only for mips32r2. * gas/mips/set-arch.d: Adjust according to opcode table changes. [ include/opcode/ChangeLog ] 2006-05-04 Thiemo Seufer <ths@mips.com> Nigel Stephens <nigel@mips.com> David Ung <davidu@mips.com> * mips.h: Add INSN_SMARTMIPS define. [ opcodes/ChangeLog ] 2006-05-04 Thiemo Seufer <ths@mips.com> Nigel Stephens <nigel@mips.com> David Ung <davidu@mips.com> * mips-dis.c (mips_arch_choices): Add smartmips instruction decoding to MIPS32 and MIPS32R2. Limit DSP decoding to release 2 ISAs. Add MIPS3D decoding to MIPS32R2. Add MT decoding to MIPS64R2. * mips-opc.c: fix random typos in comments. (INSN_SMARTMIPS): New defines. (mips_builtin_opcodes): Add paired single support for MIPS32R2. Move bc3f, bc3fl, bc3t, bc3tl downwards. Move flushi, flushd, flushid, wb upwards. Move cfc3, ctc3 downwards. Rework the FP_S and FP_D flags to denote single and double register accesses separately. Move dmfc3, dmtc3, mfc3, mtc3 downwards. Allow jr.hb and jalr.hb for release 1 ISAs. Allow luxc1, suxc1 for MIPS32R2. Add SmartMIPS instructions. Add two-argument variants of bc2f, bc2fl, bc2t, bc2tl. Add mfhc2, mthc2 to release 2 ISAs. * mips16-opc.c (mips16_opcodes): Add sdbbp instruction.
2006-05-032006-05-03 Thiemo Seufer <ths@mips.com>Thiemo Seufer1-1/+1
[ opcodes/ChangeLog ] * mips-opc.c (mips_builtin_opcodes): Fix mftr argument order. [ gas/testsuite/ChangeLog ] * gas/mips/mips32-mt.d: Fix mftr argument order.
2006-04-30[ gas/ChangeLog ]Thiemo Seufer1-0/+66
2006-04-30 Thiemo Seufer <ths@mips.com> David Ung <davidu@mips.com> * config/tc-mips.c (validate_mips_insn): Handling of udi cases. (mips_immed): New table that records various handling of udi instruction patterns. (mips_ip): Adds udi handling. [ include/opcode/ChangeLog ] 2006-04-30 Thiemo Seufer <ths@mips.com> David Ung <davidu@mips.com> * mips.h: Defines udi bits and masks. Add description of characters which may appear in the args field of udi instructions. [ opcodes/ChangeLog ] 2006-04-30 Thiemo Seufer <ths@mips.com> David Ung <davidu@mips.com> * mips-opc.c (mips_builtin_opcodes): Add udi instructions "udi0" to "udi15". * mips-dis.c (print_insn_args): Adds udi argument handling.
2006-01-26* mips-opc.c: Add I33 masks to these MIPS32R2 instructions: prefx,David Ung1-48/+48
ceil.l.d, ceil.l.s, cvt.d.l, cvt.l.d, cvt.l.s, cvt.s.l, floor.l.d, floor.l.s, ldxc1, lwxc1, madd.d, madd.s, msub.d, msub.s, nmadd.d, nmadd.s, nmsub.d, nmsub.s, recip.d, recip.s, round.l.d, rsqrt.d, rsqrt.s, sdxc1, swxc1, trunc.l.d, trunc.l.s.
2005-09-06* mips-opc.c (MT32): New define.Chao-ying Fu1-4/+62
(mips_builtin_opcodes): Move "bc0f", "bc0fl", "bc0t", "bc0tl" to the bottom to avoid opcode collision with "mftr" and "mttr". Add MT instructions. * mips-dis.c (mips_arch_choices): Enable INSN_MT for mips32r2. (print_insn_args): Add supports for +t, +T, !, $, *, &, g operand formats.
2005-08-25* mips-opc.c (WR_a, RD_a, MOD_a, DSP_VOLA, D32): New define.Chao-ying Fu1-0/+137
(mips_builtin_opcodes): Add DSP instructions. * mips-dis.c (mips_arch_choices): Enable INSN_DSP for mips32, mips32r2, mips64, mips64r2. (print_insn_args): Add supports for 3, 4, 5, 6, 7, 8, 9, 0, :, ', @ operand formats.
2005-05-07Update the address and phone number of the FSFNick Clifton1-1/+1
2005-03-03update copyright datesAlan Modra1-1/+1
2005-01-21 2005-01-21 Fred Fish <fnf@specifixinc.com>Fred Fish1-13/+13
* mips-opc.c: Change INSN_ALIAS to INSN2_ALIAS. Change INSN_WRITE_MDMX_ACC to INSN2_WRITE_MDMX_ACC. Change INSN_READ_MDMX_ACC to INSN2_READ_MDMX_ACC. * mips-dis.c: Ditto.
2005-01-19 2005-01-19 Fred Fish <fnf@specifixinc.com>Fred Fish1-1031/+1031
* mips-dis.c (no_aliases): New disassembly option flag. (set_default_mips_dis_options): Init no_aliases to zero. (parse_mips_dis_option): Handle no-aliases option. (print_insn_mips): Ignore table entries that are aliases if no_aliases is set. (print_insn_mips16): Ditto. * mips-opc.c (mips_builtin_opcodes): Add initializer column for new pinfo2 member and add INSN_ALIAS initializers as needed. Also move WR_MACC and RD_MACC initializers from pinfo to pinfo2. * mips16-opc.c (mips16_opcodes): Ditto.
2004-07-20opcodes/Maciej W. Rozycki1-16/+28
* mips-opc.c (mips_builtin_opcodes): Move coprocessor 2 move/branch operations to the bottom so that VR5400 multimedia instructions take precedence in disassembly. gas/testsuite/ * gas/mips/vr5400.d: Update for a correct disassembly of "racm.ob".
2004-07-20opcodes/Maciej W. Rozycki1-1/+0
* mips-opc.c (mips_builtin_opcodes): Remove the MIPS32 ISA-specific "break" encoding. gas/testsuite/ * gas/mips/mips32.s: Adjust for the unified "break" syntax. Add another "break" case. Update the comment accordingly. * gas/mips/set-arch.s: Likewise. * gas/mips/mips32.d: Adjust for the new output. * gas/mips/set-arch.d: Likewise.
2003-11-18* config/tc-mips.c (macro): Handle new macros: "lca" and "dlca"Maciej W. Rozycki1-0/+2
for loading addresses using CALL relocations. Don't emit CALL relocations when a base register is used. * gas/mips/lca-svr4pic.d: New test for the "lca" macro. * gas/mips/lca-xgot.d: Likewise. * gas/mips/lca.s: Source for the new tests. * gas/mips/mips.exp: Run the new tests. * opcode/mips.h: Define new enum members, M_LCA_AB and M_DLCA_AB. * mips-opc.c (mips_builtin_opcodes): Handle new macros: "lca" and "dlca".
2003-09-30[ bfd/ChangeLog ]Chris Demetriou1-3/+20
2003-09-30 Chris Demetriou <cgd@broadcom.com> * archures.c (bfd_mach_mipsisa64r2): New define. * bfd-in2.h: Regenerate. * aoutx.h (NAME(aout,machine_type)): Handle bfd_mach_mipsisa64r2. * cpu-mips.c (I_mipsisa64r2): New enum value. (arch_info_struct): Add entry for I_mipsisa64r2. * elfxx-mips.c (_bfd_elf_mips_mach) (_bfd_mips_elf_print_private_bfd_data): Handle E_MIPS_ARCH_64R2. (mips_set_isa_flags): Add bfd_mach_mipsisa64r2 case. (mips_mach_extensions): Add entry for bfd_mach_mipsisa64r2. [ binutils/ChangeLog ] 2003-09-30 Chris Demetriou <cgd@broadcom.com> * readelf.c (get_machine_flags): Handle E_MIPS_ARCH_64R2. [ gas/Changelog ] 2003-09-30 Chris Demetriou <cgd@broadcom.com> * configure.in (mipsisa64r2, mipsisa64r2el, mipsisa64r2*): New CPUs. * configure: Regenerate. * config/tc-mips.c (imm2_expr): New variable. (md_assemble, mips16_ip): Initialize imm2_expr. (ISA_HAS_64BIT_REGS, ISA_HAS_DROR, ISA_HAS_ROR): Add ISA_MIPS64R2. (macro_build): Handle +A, +B, +C, +E, +F, +G, and +H format operands. (macro): Handle M_DEXT and M_DINS. (validate_mips_insn): Handle +E, +F, +G, +H, and +I format operands. (mips_ip): Likewise. (OPTION_MIPS64R2): New define. (md_longopts): New entry for -mips64r2 (OPTION_MIPS64R2). OPTION_ASE_BASE): Increase to compensate for OPTION_MIPS64R2. (md_parse_option): Handle OPTION_MIPS64R2. (s_mipsset): Handle setting "mips64r2" ISA. (mips_cpu_info_table): Add mips64r2. (md_show_usage): Document -mips64r2 option. * doc/as.texinfo: Docuemnt -mips64r2 option. * doc/c-mips.texi: Likewise. [ gas/testsuite/ChangeLog ] 2003-09-30 Chris Demetriou <cgd@broadcom.com> * gas/mips/cp0-names-mips64r2.d: New file. * gas/mips/cp0sel-names-mips64r2.d: New file. * gas/mips/elf_arch_mips64r2.d: New file. * gas/mips/hwr-names-mips64r2.d: New file. * gas/mips/mips32r2-ill-fp64.l: New file. * gas/mips/mips32r2-ill-fp64.s: New file. * gas/mips/mips64r2-ill.l: New file. * gas/mips/mips64r2-ill.s: New file. * gas/mips/mips64r2.d: New file. * gas/mips/mips64r2.s: New file. * gas/mips/mips.exp: Define "mips64r2" arch, and run new tests. [ include/elf/ChangeLog ] 2003-09-30 Chris Demetriou <cgd@broadcom.com> * mips.h (E_MIPS_ARCH_64R2): New define. [ include/opcode/ChangeLog ] 2003-09-30 Chris Demetriou <cgd@broadcom.com> * mips.h: Document +E, +F, +G, +H, and +I operand types. Update documentation of I, +B and +C operand types. (INSN_ISA64R2, ISA_MIPS64R2, CPU_MIPS64R2): New defines. (M_DEXT, M_DINS): New enum values. [ ld/ChangeLog ] 2003-09-30 Chris Demetriou <cgd@broadcom.com> * ldmain.c (get_emulation): Ignore "-mips64r2". [ ld/testsuite/ChangeLog ] 2003-09-30 Chris Demetriou <cgd@broadcom.com> * ld-mips-elf/mips-elf-flags.exp: Add tests for combinations with MIPS64r2. [ opcodes/ChangeLog ] 2003-09-30 Chris Demetriou <cgd@broadcom.com> * mips-dis.c (mips_arch_choices): Add entry for "mips64r2" (print_insn_args): Add handing for +E, +F, +G, and +H. * mips-opc.c (I65): New define for MIPS64r2. (mips_builtin_opcodes): Add "dext", "dextm", "dextu", "dins", "dinsm", "dinsu", "drotl", "drotr", "drotr32", "drotrv", "dsbh", and "dshd" for MIPS64r2. Adjust "dror", "dror32", and "drorv" to be supported on MIPS64r2.
2003-01-012002-12-31 Chris Demetriou <cgd@broadcom.com>Chris Demetriou1-5/+5
* mips-opc.c (mips_builtin_opcodes): Move "di" into the right order alphabetically, and make all hex constants use lower-case letters.
2002-12-31[ gas/ChangeLog ]Chris Demetriou1-0/+4
2002-12-31 Chris Demetriou <cgd@broadcom.com> * config/tc-mips.c (validate_mips_insn, mips_ip): Recognize the "+D" operand, which will be used only by the disassembler. [ gas/testsuite/ChangeLog ] 2002-12-31 Chris Demetriou <cgd@broadcom.com> * gas/mips/cp0sel-names-mips32.d: New test. * gas/mips/cp0sel-names-mips32r2.d: New test. * gas/mips/cp0sel-names-mips64.d: New test. * gas/mips/cp0sel-names-numeric.d: New test. * gas/mips/cp0sel-names-sb1.d: New test. * gas/mips/cp0sel-names.s: New test source file. * gas/mips/mips.exp: Run new tests. [ include/opcode/ChangeLog ] 2002-12-31 Chris Demetriou <cgd@broadcom.com> * mips.h: Note that the "+D" operand type name is now used. [ opcodes/ChangeLog ] 2002-12-31 Chris Demetriou <cgd@broadcom.com> * mips-dis.c (mips_cp0sel_name): New structure. (mips_cp0sel_names_mips3264, mips_cp0sel_names_mips3264r2) (mips_cp0sel_names_sb1): New arrays. (mips_arch_choice): New structure members "cp0sel_names" and "cp0sel_names_len". (mips_arch_choices): Add references to new cp0sel_names arrays as appropriate, and make all existing entries reference appropriate mips_XXX_names_numeric arrays rather than simply using NULL. (mips_cp0sel_names, mips_cp0sel_names_len): New variables. (lookup_mips_cp0sel_name): New function. (set_default_mips_dis_options): Set mips_cp0sel_names and mips_cp0sel_names_len as appropriate. Remove now-unnecessary checks for NULL register name arrays. (parse_mips_dis_option): Likewise. (print_insn_arg): Handle "+D" operand type. * mips-opc.c (mips_builtin_opcodes): Add new "+D" variants of mfc0, mtc0, dmfc0, and dmtc0 to print CP0+sel register names symbolically.
2002-12-31[ bfd/ChangeLog ]Chris Demetriou1-5/+35
2002-12-30 Chris Demetriou <cgd@broadcom.com> * aoutx.h (NAME(aout,machine_type)): Add bfd_mach_mipsisa32r2 case. * archures.c (bfd_mach_mipsisa32r2): New define. * bfd-in2.h: Regenerate. * cpu-mips.c (I_mipsisa32r2): New enum value. (arch_info_struct): Add entry for I_mipsisa32r2. * elfxx-mips.c (elf_mips_isa, _bfd_elf_mips_mach) (_bfd_mips_elf_print_private_bfd_data): Handle E_MIPS_ARCH_32R2. (_bfd_mips_elf_final_write_processing): Add bfd_mach_mipsisa32r2 case. (_bfd_mips_elf_merge_private_bfd_data): Handle merging of binaries marked as using MIPS32 Release 2. [ binutils/ChangeLog ] 2002-12-30 Chris Demetriou <cgd@broadcom.com> * doc/binutils.texi (objdump): Note MIPS HWR (Hardware Register) changes in MIPS -M options. [ gas/ChangeLog ] 2002-12-30 Chris Demetriou <cgd@broadcom.com> * configure.in: Recognize mipsisa32r2, mipsisa32r2el, and CPU variants. * configure: Regenerate. * config/tc-mips.c (ISA_HAS_DROR, ISA_HAS_ROR): New defines. (macro_build): Handle "K" operand. (macro2): Use ISA_HAS_DROR and ISA_HAS_ROR in the places where CPU_HAS_DROR and CPU_HAS_ROR are currently used. (mips_ip): New variable "lastpos", and implement "+A", "+B", and "+C" operands for MIPS32 Release 2 ins/ext instructions. Implement "K" operand for MIPS32 Release 2 rdhwr instruction. (validate_mips_insn): Implement "+" as a way to extend the allowed operands, and implement "K", "+A", "+B", and "+C" operands. (OPTION_MIPS32R2): New define. (md_longopts): Add entry for OPTION_MIPS32R2. (OPTION_ELF_BASE): Adjust to accomodate OPTIONS_MIPS32R2. (md_parse_option): Handle OPTION_MIPS32R2. (s_mipsset): Reimplement handling of ".set mipsN" options and add support for ".set mips32r2". (mips_cpu_info_table): Add entry for "mips32r2" (MIPS32 Release 2). (md_show_usage): Document "-mips32r2" option. * doc/as.texinfo: Document "-mips32r2" option. * doc/c-mips.texi: Likewise. [ gas/testsuite/ChangeLog ] 2002-12-30 Chris Demetriou <cgd@broadcom.com> * gas/mips/cp0-names-mips32r2.d: New test. * gas/mips/hwr-names-mips32r2.d: New test. * gas/mips/hwr-names-numeric.d: New test. * gas/mips/hwr-names.s: New test source file. * gas/mips/mips32r2.d: New test. * gas/mips/mips32r2.s: New test source file. * gas/mips/mips32r2-ill.l: New test. * gas/mips/mips32r2-ill.s: New test source file. * gas/mips/mips.exp: Add mips32r2 architecture data array entry. Run new tests mentioned above. [ include/elf/ChangeLog ] 2002-12-30 Chris Demetriou <cgd@broadcom.com> * mips.h (E_MIPS_ARCH_32R2): New define. [ include/opcode/ChangeLog ] 2002-12-30 Chris Demetriou <cgd@broadcom.com> * mips.h: Document "+" as the start of two-character operand type names, and add new "K", "+A", "+B", and "+C" operand types. (OP_MASK_INSMSB, OP_SH_INSMSB, OP_MASK_EXTMSB) (OP_SH_EXTMSB, INSN_ISA32R2, ISA_MIPS32R2, CPU_MIPS32R2): New defines. [ opcodes/ChangeLog ] 2002-12-30 Chris Demetriou <cgd@broadcom.com> * mips-dis.c (mips_cp0_names_mips3264r2, mips_hwr_names_numeric) (mips_hwr_names_mips3264r2): New arrays. (mips_arch_choice): New "hwr_names" member. (mips_arch_choices): Adjust for structure change, and add a new entry for "mips32r2" ISA. (mips_hwr_names): New variable. (set_default_mips_dis_options): Set mips_hwr_names. (parse_mips_dis_option): New "hwr-names" option which sets mips_hwr_names, and adjust "reg-names=ARCH" to set mips_hwr_names. (print_insn_arg): Change return type to "int" and use that to indicate number of characters consumed. Add support for "+" operand extension character, "+A", "+B", "+C", and "K" operands. (print_insn_mips): Adjust for changes to print_insn_arg. (print_mips_disassembler_options): Adjust for "hwr-names" addition and "reg-names" change. * mips-opc (I33): New define (shorthand for INSN_ISA32R2). (mips_builtin_opcodes): Note that "nop" and "ssnop" are special forms of "sll". Add new MIPS32 Release 2 instructions: ehb, di, ei, ext, ins, jr.hb, jalr.hb, mfhc1, mfhc2, mthc1, mthc2, rdhwr, rdpgpr, seb, seh, synci, wrpgpr, wsbh. Note that hardware rotate instructions (ror, rorv) can be used on MIPS32 Release 2, and add the official mnemonics for them (rotr, rotrv) and the similar "rotl" mnemonic for left-rotate.
2002-12-18[ opcodes/ChangeLog ]Chris Demetriou1-8/+5
2002-12-18 Chris Demetriou <cgd@broadcom.com> * mips-opc.c (mips_builtin_opcodes): Remove one "ror" and two "dror" entries, and reorder the remaining "dror" and "ror" entries. [ gas/ChangeLog ] 2002-12-18 Chris Demetriou <cgd@broadcom.com> * config/tc-mips.c (macro): In M_DROL, M_DROR, M_ROL, and M_ROR, use hardware rotate ops as appropriate. In M_DROL_I, M_DROR_I, M_ROL_I, and M_ROR_I, simplify code, clean up warnings, and arrange not to issue warnings about use of AT when AT is not actually used. [ gas/testsuite/ChangeLog ] 2002-12-18 Chris Demetriou <cgd@broadcom.com> * gas/mips/rol.s: Add ".set noat" and some new instructions to test. * gas/mips/rol64.s: Likewise. * gas/mips/rol.l: New file. * gas/mips/rol.d: Adjust to use rol.l and for rol.s changes. * gas/mips/rol64.l: New file. * gas/mips/rol64.d: Adjust to use rol64.l and for rol64.s changes. * gas/mips/rol-hw.d: New file. * gas/mips/rol-hw.l: New file. * gas/mips/rol64-hw.d: New file. * gas/mips/rol64-hw.l: New file. * gas/mips/mips.exp: Run rol-hw and rol64-hw tests.
2002-09-30[include/opcode/]Richard Sandiford1-21/+138
* mips.h: Update comment for new opcodes. (OP_MASK_VECBYTE, OP_SH_VECBYTE): New. (OP_MASK_VECALIGN, OP_SH_VECALIGN): New. (INSN_4111, INSN_4120, INSN_5400, INSN_5500): New. (CPU_VR4120, CPU_VR5400, CPU_VR5500): New. (OPCODE_IS_MEMBER): Handle the new CPU_* values and INSN_* flags. Don't match CPU_R4111 with INSN_4100. [opcodes/] * mips-dis.c (print_insn_arg): Handle '[', ']', 'e' and '%'. (mips_isa_type): Handle bfd_mach_mips4120, bfd_mach_mips5400 and bfd_mach_mips5500. * mips-opc.c (V1): Include INSN_4111 and INSN_4120. (N411, N412, N5, N54, N55): New convenience defines. (mips_builtin_opcodes): Add vr4120, vr5400 and vr5500 opcodes. Change dmadd16 and madd16 from V1 to N411.
2002-08-09* config/tc-mips.c (macro): Handle a register plus a 16-bitMaciej W. Rozycki1-2/+0
immediate offset in "dla" and "la" expansions. * gas/mips/empic.d: Treat "addiu" and "daddiu" as equivalent when $0 is source. * mips-opc.c (mips_builtin_opcodes): Remove "dla" and "la" as aliases to "daddiu" and "addiu".
2002-07-09 * config/tc-mips.c (macro_build): Handle MIPS16 insns.Thiemo Seufer1-3/+4
(mips_ip): Likewise. * mips.h (INSN_MIPS16): New define. * mips-dis.c (mips_isa_type): Add MIPS16 insn handling. * mips-opc.c (I16): New define. (mips_builtin_opcodes): Make jalx an I16 insn.
2002-05-312002-05-31 Chris G. Demetriou <cgd@broadcom.com>Chris Demetriou1-8/+8
* mips-opc.c: Clean up a few whitespace issues, and sort a few entries understanding that 'x' follows 'w' in the alphabet.
2002-05-31[ opcodes/ChangeLog ]Chris Demetriou1-46/+49
2002-05-31 Chris G. Demetriou <cgd@broadcom.com> Ed Satterthwaite <ehs@broadcom.com> * mips-opc.c: Add support for SB-1 MDMX subset and extensions. [ gas/testsuite/ChangeLog ] 2002-05-31 Chris G. Demetriou <cgd@broadcom.com> * gas/mips/sb1-ext-mdmx.s: New file. * gas/mips/sb1-ext-mdmx.d: Likewise. * gas/mips/mips.exp: Run new "sb1-ext-mdmx" test.
2002-05-31[ gas/ChangeLog ]Chris Demetriou1-5/+99
2002-05-30 Chris G. Demetriou <cgd@broadcom.com> Ed Satterthwaite <ehs@broadcom.com> * config/tc-mips.c (mips_set_options): New "ase_mdmx" member. (mips_opts): Initialize "ase_mdmx" member. (file_ase_mdmx): New variable. (CPU_HAS_MDMX): New macro. (md_begin): Initialize mips_opts.ase_mdmx and file_ase_mdmx based on command line options and configuration defaults. (macro_build): Note in comment that use of MDMX in macros is not currently allowed. (validate_mips_insn): Add support for the "O", "Q", "X", "Y", and "Z" MDMX operand types. (mips_ip): Accept MDMX instructions if mips_opts.ase_mdmx is set, and add support for the "O", "Q", "X", "Y", and "Z" MDMX operand types. (OPTION_MDMX, OPTION_NO_MDMX, md_longopts, md_parse_option): Add support for "-mdmx" and "-no-mdmx" options. (OPTION_ELF_BASE): Move to accomodate new options. (s_mipsset): Support ".set mdmx" and ".set nomdmx". (mips_elf_final_processing): Set MDMX ASE ELF header flag if file_ase_mdmx was set. * doc/as.texinfo: Document -mdmx and -no-mdmx options. * doc/c-mips.texi: Likewise, and document ".set mdmx" and ".set nomdmx" directives. [ gas/testsuite/ChangeLog ] 2002-05-30 Chris G. Demetriou <cgd@broadcom.com> * gas/mips/mips64-mdmx.s: New file. * gas/mips/mips64-mdmx.d: Likewise. * gas/mips/mips.exp: Run new "mips64-mdmx" test. [ include/opcode/ChangeLog ] 2002-05-30 Chris G. Demetriou <cgd@broadcom.com> * mips.h (OP_SH_ALN, OP_MASK_ALN, OP_SH_VSEL, OP_MASK_VSEL) (MDMX_FMTSEL_IMM_QH, MDMX_FMTSEL_IMM_OB, MDMX_FMTSEL_VEC_QH) (MDMX_FMTSEL_VEC_OB, INSN_READ_MDMX_ACC, INSN_WRITE_MDMX_ACC) (INSN_MDMX): New constants, for MDMX support. (opcode character list): Add "O", "Q", "X", "Y", and "Z" for MDMX. [ opcodes/ChangeLog ] 2002-05-30 Chris G. Demetriou <cgd@broadcom.com> Ed Satterthwaite <ehs@broadcom.com> * mips-dis.c (print_insn_arg): Add support for 'O', 'Q', 'X', 'Y', and 'Z' formats, for MDMX. (mips_isa_type): Add MDMX instructions to the ISA bit mask for bfd_mach_mipsisa64. * mips-opc.c: Add support for MDMX instructions. (MX): New definition. * mips-dis.c: Update copyright years to include 2002.
2002-05-21? gas/testsuite/gas/mips/rol64.dThiemo Seufer1-0/+4
? gas/testsuite/gas/mips/rol64.s Index: gas/ChangeLog =================================================================== RCS file: /cvs/src/src/gas/ChangeLog,v retrieving revision 1.1334 diff -u -p -r1.1334 ChangeLog --- gas/ChangeLog 21 May 2002 20:01:51 -0000 1.1334 +++ gas/ChangeLog 21 May 2002 23:32:51 -0000 @@ -1,3 +1,8 @@ +2002-05-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> + + * config/tc-mips.c (macro2): Add 64 bit drol, dror macros. + Optimize the rotate by zero case. + 2002-05-21 Nick Clifton <nickc@cambridge.redhat.com> * configure.in: Remove accidental enabling of bfd_gas=yes for Index: gas/config/tc-mips.c =================================================================== RCS file: /cvs/src/src/gas/config/tc-mips.c,v retrieving revision 1.123 diff -u -p -r1.123 tc-mips.c --- gas/config/tc-mips.c 14 May 2002 23:35:59 -0000 1.123 +++ gas/config/tc-mips.c 21 May 2002 23:32:52 -0000 @@ -6686,6 +6686,17 @@ macro2 (ip) --mips_opts.noreorder; break; + case M_DROL: + macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "dsubu", + "d,v,t", AT, 0, treg); + macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "dsrlv", + "d,t,s", AT, sreg, AT); + macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "dsllv", + "d,t,s", dreg, sreg, treg); + macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "or", + "d,v,t", dreg, dreg, AT); + break; + case M_ROL: macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "subu", "d,v,t", AT, 0, treg); @@ -6697,15 +6708,55 @@ macro2 (ip) "d,v,t", dreg, dreg, AT); break; + case M_DROL_I: + { + unsigned int rot; + char *l, *r; + + if (imm_expr.X_op != O_constant) + as_bad (_("rotate count too large")); + rot = imm_expr.X_add_number & 0x3f; + if (! rot) + break; + l = (rot < 0x20) ? "dsll" : "dsll32"; + r = ((0x40 - rot) < 0x20) ? "dsrl" : "dsrl32"; + rot &= 0x1f; + macro_build ((char *) NULL, &icnt, (expressionS *) NULL, l, + "d,w,<", AT, sreg, rot); + macro_build ((char *) NULL, &icnt, (expressionS *) NULL, r, + "d,w,<", dreg, sreg, (0x20 - rot) & 0x1f); + macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "or", + "d,v,t", dreg, dreg, AT); + } + break; + case M_ROL_I: - if (imm_expr.X_op != O_constant) - as_bad (_("rotate count too large")); - macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "sll", "d,w,<", - AT, sreg, (int) (imm_expr.X_add_number & 0x1f)); - macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "srl", "d,w,<", - dreg, sreg, (int) ((0 - imm_expr.X_add_number) & 0x1f)); - macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "or", "d,v,t", - dreg, dreg, AT); + { + unsigned int rot; + + if (imm_expr.X_op != O_constant) + as_bad (_("rotate count too large")); + rot = imm_expr.X_add_number & 0x1f; + if (! rot) + break; + macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "sll", + "d,w,<", AT, sreg, rot); + macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "srl", + "d,w,<", dreg, sreg, (0x20 - rot) & 0x1f); + macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "or", + "d,v,t", dreg, dreg, AT); + } + break; + + case M_DROR: + macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "dsubu", + "d,v,t", AT, 0, treg); + macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "dsllv", + "d,t,s", AT, sreg, AT); + macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "dsrlv", + "d,t,s", dreg, sreg, treg); + macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "or", + "d,v,t", dreg, dreg, AT); break; case M_ROR: @@ -6719,15 +6770,44 @@ macro2 (ip) "d,v,t", dreg, dreg, AT); break; + case M_DROR_I: + { + unsigned int rot; + char *l, *r; + + if (imm_expr.X_op != O_constant) + as_bad (_("rotate count too large")); + rot = imm_expr.X_add_number & 0x3f; + if (! rot) + break; + r = (rot < 0x20) ? "dsrl" : "dsrl32"; + l = ((0x40 - rot) < 0x20) ? "dsll" : "dsll32"; + rot &= 0x1f; + macro_build ((char *) NULL, &icnt, (expressionS *) NULL, r, + "d,w,<", AT, sreg, rot); + macro_build ((char *) NULL, &icnt, (expressionS *) NULL, l, + "d,w,<", dreg, sreg, (0x20 - rot) & 0x1f); + macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "or", + "d,v,t", dreg, dreg, AT); + } + break; + case M_ROR_I: - if (imm_expr.X_op != O_constant) - as_bad (_("rotate count too large")); - macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "srl", "d,w,<", - AT, sreg, (int) (imm_expr.X_add_number & 0x1f)); - macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "sll", "d,w,<", - dreg, sreg, (int) ((0 - imm_expr.X_add_number) & 0x1f)); - macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "or", "d,v,t", - dreg, dreg, AT); + { + unsigned int rot; + + if (imm_expr.X_op != O_constant) + as_bad (_("rotate count too large")); + rot = imm_expr.X_add_number & 0x1f; + if (! rot) + break; + macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "srl", + "d,w,<", AT, sreg, rot); + macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "sll", + "d,w,<", dreg, sreg, (0x20 - rot) & 0x1f); + macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "or", + "d,v,t", dreg, dreg, AT); + } break; case M_S_DOB: Index: gas/testsuite/ChangeLog =================================================================== RCS file: /cvs/src/src/gas/testsuite/ChangeLog,v retrieving revision 1.315 diff -u -p -r1.315 ChangeLog --- gas/testsuite/ChangeLog 20 May 2002 17:05:34 -0000 1.315 +++ gas/testsuite/ChangeLog 21 May 2002 23:32:54 -0000 @@ -1,3 +1,9 @@ +2002-05-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> + + * gas/mips/rol64.s: New file, test of drol, dror macros. + * gas/mips/rol64.d: Likewise. + * gas/mips/mips.exp: Add new test. + 2002-05-20 Nick Clifton <nickc@cambridge.redhat.com> * gas/arm/arm.exp: Replace deprecated command line switches Index: gas/testsuite/gas/mips/mips.exp =================================================================== RCS file: /cvs/src/src/gas/testsuite/gas/mips/mips.exp,v retrieving revision 1.32 diff -u -p -r1.32 mips.exp --- gas/testsuite/gas/mips/mips.exp 4 Apr 2002 08:23:30 -0000 1.32 +++ gas/testsuite/gas/mips/mips.exp 21 May 2002 23:32:54 -0000 @@ -122,6 +122,7 @@ if { [istarget mips*-*-*] } then { run_dump_test "mul" } run_dump_test "rol" + run_dump_test "rol64" if !$aout { run_dump_test "sb" } run_dump_test "trunc" if !$aout { run_dump_test "ulh" } Index: include/opcode/ChangeLog =================================================================== RCS file: /cvs/src/src/include/opcode/ChangeLog,v retrieving revision 1.167 diff -u -p -r1.167 ChangeLog --- include/opcode/ChangeLog 17 May 2002 19:01:03 -0000 1.167 +++ include/opcode/ChangeLog 21 May 2002 23:32:57 -0000 @@ -1,3 +1,7 @@ +2002-05-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> + + * mips.h: Add M_DROL, M_DROL_I, M_DROR, M_DROR_I macro cases. + 2002-05-17 Andrey Volkov <avolkov@sources.redhat.com> * h8300.h: Corrected defs of all control regs Index: include/opcode/mips.h =================================================================== RCS file: /cvs/src/src/include/opcode/mips.h,v retrieving revision 1.24 diff -u -p -r1.24 mips.h --- include/opcode/mips.h 16 Mar 2002 03:09:18 -0000 1.24 +++ include/opcode/mips.h 21 May 2002 23:32:57 -0000 @@ -526,9 +526,13 @@ enum M_REM_3I, M_REMU_3, M_REMU_3I, + M_DROL, M_ROL, + M_DROL_I, M_ROL_I, + M_DROR, M_ROR, + M_DROR_I, M_ROR_I, M_S_DA, M_S_DOB, Index: opcodes/ChangeLog =================================================================== RCS file: /cvs/src/src/opcodes/ChangeLog,v retrieving revision 1.447 diff -u -p -r1.447 ChangeLog --- opcodes/ChangeLog 17 May 2002 14:36:45 -0000 1.447 +++ opcodes/ChangeLog 21 May 2002 23:33:00 -0000 @@ -1,3 +1,7 @@ +2002-05-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> + + * mips-opc.c (mips_builtin_opcodes): Add drol, dror macros. + Fri May 17 14:26:44 2002 J"orn Rennecke <joern.rennecke@superh.com> * disassemble.c (disassembler): Just use print_insn_sh for bfd_arch_sh. Index: opcodes/mips-opc.c =================================================================== RCS file: /cvs/src/src/opcodes/mips-opc.c,v retrieving revision 1.32 diff -u -p -r1.32 mips-opc.c --- opcodes/mips-opc.c 17 Mar 2002 02:42:25 -0000 1.32 +++ opcodes/mips-opc.c 21 May 2002 23:33:00 -0000 @@ -492,6 +492,10 @@ const struct mips_opcode mips_builtin_op {"dremu", "z,s,t", 0x0000001f, 0xfc00ffff, RD_s|RD_t|WR_HILO, I3 }, {"dremu", "d,v,t", 3, (int) M_DREMU_3, INSN_MACRO, I3 }, {"dremu", "d,v,I", 3, (int) M_DREMU_3I, INSN_MACRO, I3 }, +{"drol", "d,v,t", 0, (int) M_DROL, INSN_MACRO, I3 }, +{"drol", "d,v,I", 0, (int) M_DROL_I, INSN_MACRO, I3 }, +{"dror", "d,v,t", 0, (int) M_DROR, INSN_MACRO, I3 }, +{"dror", "d,v,I", 0, (int) M_DROR_I, INSN_MACRO, I3 }, {"dsllv", "d,t,s", 0x00000014, 0xfc0007ff, WR_d|RD_t|RD_s, I3 }, {"dsll32", "d,w,<", 0x0000003c, 0xffe0003f, WR_d|RD_t, I3 }, {"dsll", "d,w,s", 0x00000014, 0xfc0007ff, WR_d|RD_t|RD_s, I3 }, /* dsllv */
2002-03-172002-03-16 Chris Demetriou <cgd@broadcom.com>Chris Demetriou1-8/+11
* mips-opc.c (M3D): Tweak comment. (mips_builtin_op): Add comment indicating that opcodes of the same name must be placed together in the table, and sort the "recip.fmt", "recip1.fmt", "recip2.fmt", "rsqrt.fmt", "rsqrt1.fmt", and "rsqrt2.fmt" opcodes by name.
2002-03-16[ gas/ChangeLog ]Chris Demetriou1-1/+73
2002-03-15 Chris G. Demetriou <cgd@broadcom.com> * config/tc-mips.c (mips_set_options): New "ase_mips3d" member. (mips_opts): Initialize "ase_mips3d" member. (file_ase_mips3d): New variable. (CPU_HAS_MIPS3D): New macro. (md_begin): Initialize mips_opts.ase_mips3d and file_ase_mips3d based on command line options and configuration defaults. (macro_build, mips_ip): Accept MIPS-3D instructions if mips_opts.ase_mips3d is set. (OPTION_MIPS3D, OPTION_NO_MIPS3D, md_longopts, md_parse_option): Add support for "-mips3d" and "-no-mips3d" options. (OPTION_ELF_BASE): Move to accomodate new options. (s_mipsset): Support ".set mips3d" and ".set nomips3d". (mips_elf_final_processing): Add a comment indicating that a MIPS-3D ASE ELF header flag should be set, when one exists. * doc/as.texinfo: Document -mips3d and -no-mips3d options. * doc/c-mips.texi: Likewise, and document ".set mips3d" and ".set nomips3d" directives. [ gas/testsuite/ChangeLog ] 2002-03-15 Chris G. Demetriou <cgd@broadcom.com> * gas/mips/mips64-mips3d.s: New file. * gas/mips/mips64-mips3d.d: Likewise. * gas/mips/mips.exp: Run new "mips64-mips3d" test. [ include/opcode/ChangeLog ] 2002-03-15 Chris G. Demetriou <cgd@broadcom.com> * mips.h (INSN_MIPS3D): New definition used to mark MIPS-3D instructions. (OPCODE_IS_MEMBER): Adjust comments to indicate that ASE bit masks may be passed along with the ISA bitmask. [ opcodes/ChangeLog ] 2002-03-15 Chris G. Demetriou <cgd@broadcom.com> * mips-dis.c (mips_isa_type): Add MIPS3D instructions to the ISA bit masks for bfd_mach_mips_sb1 and bfd_mach_mipsisa64. Add comments for bfd_mach_mipsisa32 and bfd_mach_mipsisa64 that indicate that they should dissassemble all applicable MIPS-specified ASEs. * mips-opc.c: Add support for MIPS-3D instructions. (M3D): New definition. * mips-opc.c: Update copyright years.
2002-03-162002-03-15 Chris G. Demetriou <cgd@broadcom.com>Chris Demetriou1-6/+6
* mips-opc.c (mips_builtin_opcodes): Sort bc<N> opcodes by name.
2002-03-062002-03-06 Chris Demetriou <cgd@broadcom.com>Chris Demetriou1-1/+3
* mips-opc.c (mips_builtin_opcodes): Mark "pref" as being present on I4. * mips-opc.c (mips_builtin_opcodes): Add "movn.ps" and "movz.ps".
2001-10-23[opcodes/ChangeLog]Chris Demetriou1-2/+2
2001-10-21 Chris Demetriou <cgd@broadcom.com> * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and "bltzall" as writing GPR 31 (since they do). * mips-dis.c (print_insn_arg): Calculate info->target where appropriate. (print_insn_mips): Fill in instruction info. (print_mips16_insn_arg): Remove unneded variable 'val'. Removed duplicated instruction target calculations, calculate once and print that result. Use same idiom for masking the jump segment bits as is used in print_insn_arg. [gas/testsuite/ChangeLog] 2001-10-21 Chris Demetriou <cgd@broadcom.com> * gas/mips/beq.s: Add zero words at end of instructions so that objdump will print "..." when disassembling. * gas/mips/beq.d: Update for disassembler changes which force branch delay-slot nops to be printed. * gas/mips/bge.d: Ditto. * gas/mips/bgeu.d: Ditto. * gas/mips/blt.d: Ditto. * gas/mips/bltu.d: Ditto. * gas/mips/jal-svr4pic.d: Ditto. * gas/mips/jal-xgot.d: Ditto.
2001-10-18[gas/testsuite/ChangeLog]Chris Demetriou1-0/+5
2001-10-17 Chris Demetriou <cgd@broadcom.com> * gas/mips/mips.exp (sb1-ext-ps): New test to test SB-1 core's paired-single extensions to the MIPS64 ISA. * gas/mips/sb1-ext-ps.d: New file. * gas/mips/sb1-ext-ps.s: New file. [include/opcode/ChangeLog] 2001-10-17 Chris Demetriou <cgd@broadcom.com> * mips.h (INSN_SB1): New cpu-specific instruction bit. (OPCODE_IS_MEMBER): Allow instructions matching INSN_SB1 if cpu is CPU_SB1. [opcodes/ChangeLog] 2001-10-17 Chris Demetriou <cgd@broadcom.com> * mips-dis.c (mips_isa_type): Make the ISA used to disassemble SB-1 binaries include instructions specific to the SB-1. * mips-opc.c (SB1): New definition. (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps", "recip.ps", "rsqrt.ps", and "sqrt.ps".
2001-08-16Add support for MIPS R1[02]000 performance counter opcodes.Thiemo Seufer1-4/+9
2001-08-16 * mips-opc.c: R3900s can support all branch likely INSN_MACROs whereJonathan Larmour1-18/+18
the corresponding non-likely insn is in MIPS I.
2001-08-10 * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32Richard Sandiford1-3/+1
argument. * mips-opc.c (G6): Undefine. (mips_builtin_opcodes): Remove gp32 entry for "move". Add macro as the first "move" alternative.
2001-07-212001-07-21 Chris Demetriou <cgd@broadcom.com>Chris Demetriou1-4/+4
* mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s into the rest of the surrounding definitions.
2001-06-222001-06-22 Eric Christopher <echristo@redhat.com>Eric Christopher1-5/+4
* mips-opc.c: Move prefx to start of the table.
2001-03-24Remove extraneous whitespaceNick Clifton1-8/+8
2001-03-13Fix typos in ChangeLogs; fix dates in copyright noticesNick Clifton1-1/+2
2000-12-12Update copyright datesNick Clifton1-1/+1
2000-12-03Add MIPS64 instructions and testsNick Clifton1-4/+14
2000-12-03Remove all uses of M1.Nick Clifton1-87/+84
2000-12-03Use the WR_HILO, RD_HILO, MOD_HILO, and MOD_LO macros.Nick Clifton1-317/+317
2000-12-03Finish off adding MIPS32 instructions.Nick Clifton1-315/+317
generated by cgit v1.1 at 2024-12-04 08:22:20 +0000