aboutsummaryrefslogtreecommitdiff
path: root/opcodes/mips-opc.c
AgeCommit message (Collapse)AuthorFilesLines
2011-08-09 gas/Maciej W. Rozycki1-0/+10
* config/tc-mips.c (mips_set_options): Add ase_mcu. (mips_opts): Initialise ase_mcu to -1. (ISA_SUPPORTS_MCU_ASE): New macro. (MIPS_CPU_ASE_MCU): Likewise. (is_opcode_valid): Handle MCU. (macro_build, macro): Likewise. (validate_mips_insn, validate_micromips_insn): Likewise. (mips_ip): Likewise. (options): Add OPTION_MCU and OPTION_NO_MCU. (md_longopts): Add mmcu and mno-mcu. (md_parse_option): Handle OPTION_MCU and OPTION_NO_MCU. (mips_after_parse_args): Handle MCU. (s_mipsset): Likewise. (md_show_usage): Handle MCU options. * doc/as.texinfo: Document -mmcu and -mno-mcu options. * doc/c-mips.texi: Likewise, and document ".set mcu" and ".set nomcu" directives. gas/testsuite/ * gas/mips/micromips@mcu.d: New test. * gas/mips/mcu.d: Likewise. * gas/mips/mcu.s: New test source. * gas/mips/mips.exp: Run the new tests. include/opcode/ * mips.h (OP_MASK_3BITPOS, OP_SH_3BITPOS): New macros. (OP_MASK_OFFSET12, OP_SH_OFFSET12): Redefine. (INSN_ASE_MASK): Add the MCU bit. (INSN_MCU): New macro. (M_ACLR_AB, M_ACLR_OB, M_ASET_AB, M_ASET_OB): New enum values. (MICROMIPSOP_MASK_3BITPOS, MICROMIPSOP_SH_3BITPOS): New macros. opcodes/ * mips-dis.c (mips_arch_choices): Enable MCU for "mips32r2" and "mips64r2". (print_insn_args, print_insn_micromips): Handle MCU. * micromips-opc.c (MC): New macro. (micromips_opcodes): Add "aclr", "aset" and "iret". * mips-opc.c (MC): New macro. (mips_builtin_opcodes): Add "aclr", "aset" and "iret".
2011-07-24include/opcode/Richard Sandiford1-24/+26
2011-07-24 Maciej W. Rozycki <macro@codesourcery.com> * mips.h (INSN_TRAP): Rename to... (INSN_NO_DELAY_SLOT): ... this. (INSN_SYNC): Remove macro. gas/ 2011-07-24 Maciej W. Rozycki <macro@codesourcery.com> * config/tc-mips.c (can_swap_branch_p): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT. Remove the check for INSN_SYNC as well as explicit checks for ERET and DERET when scheduling branch delay slots. opcodes/ 2011-07-24 Maciej W. Rozycki <macro@codesourcery.com> * mips-opc.c (NODS): New macro. (TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT. (DSP_VOLA): Likewise. (mips_builtin_opcodes): Add NODS annotation to "deret" and "eret". Replace INSN_SYNC with NODS throughout. Use NODS in place of TRAP for "wait", "waiti" and "yield". * mips16-opc.c (NODS): New macro. (TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT. (mips16_opcodes): Use NODS in place of TRAP for "jalrc", "jrc", "restore" and "save".
2011-02-28 opcodes/Maciej W. Rozycki1-1/+1
* mips-opc.c (mips_builtin_opcodes): Correct register use annotation of "alnv.ps". gas/testsuite/ * gas/mips/alnv_ps-swap.d: New test for ALNV.PS instruction branch swapping. * gas/mips/alnv_ps-swap.s: Source for the new test. * gas/mips/mips.exp: Run the new test.
2011-02-28 gas/Maciej W. Rozycki1-0/+1
* config/tc-mips.c (macro): Handle M_PREF_AB. include/opcode/ * mips.h (M_PREF_AB): New enum value. opcodes/ * mips-opc.c (mips_builtin_opcodes): Add "pref" macro.
2010-12-18include/opcode/Richard Sandiford1-0/+65
2010-12-14 Mingjie Xing <mingjie.xing@gmail.com> * mips.h (OP_*_OFFSET_A, OP_*_OFFSET_B, OP_*_OFFSET_C) (OP_*_RZ, OP_*_FZ, INSN2_M_FP_D, INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z) (INSN2_READ_GPR_Z, INSN2_READ_FPR_Z, INSN2_READ_GPR_D): Define. opcodes/ 2010-12-14 Mingjie Xing <mingjie.xing@gmail.com> * mips-opc.c (WR_z, WR_Z, RD_z, RD_Z, RD_d): Define. (mips_builtin_opcodes): Add loongson3a specific instructions. * mips-dis.c (print_insn_args): Handle the new arguments +a|b|c|z|Z. gas/ 2010-12-14 Mingjie Xing <mingjie.xing@gmail.com> * config/tc-mips.c (insn_uses_reg): Handle the new flags INSN2_READ_FPR_Z, INSN2_READ_GPR_D and INSN2_READ_GPR_Z. (append_insn): Handle delay-slot filling for the new flags. (validate_mips_insn): Handle the new arguments +a|b|c|z|Z. (mips_ip): Handle the new arguments +a|b|c|z|Z. gas/testsuite/ 2010-12-14 Mingjie Xing <mingjie.xing@gmail.com> * gas/mips/loongson-3a-2.s, gas/mips/loongson-3a-2.d, gas/mips/loongson-3a-3.s, gas/mips/loongson-3a-3.d: New tests. * gas/mips/mips.exp: Run them.
2010-12-11opcodes/Richard Sandiford1-22/+34
2010-12-03 Mingming Sun <mingm.sun@gmail.com> * mips-opc.c: (mips_builtin_opcodes): Add loongson3a mul/div and fixed point instructions. gas/testsuite/ 2010-12-03 Mingming Sun <mingm.sun@gmail.com> * gas/mips/loongson-3a.s, gas/mips/loongson-3a.d: New test. * gas/mips/mips.exp: Run it.
2010-11-11 bfd/Nick Clifton1-59/+60
* archures.c (bfd_mach_mips_loongson_3a): Defined. * bfd-in2.h (bfd_mach_mips_loongson_3a): Defined. * cpu-mips.c (I_loongson_3a): New add. (arch_info_struct): Add loongson_3a. * elfxx-mips.c (_bfd_elf_mips_mach): Add loongson_3a. (mips_set_isa_flags): Add loongson_3a. (mips_mach_extensions): Add loongson_3a in MIPS64 extensions. binutils/ * readelf.c (get_machine_flags): Add loongson-3a. gas/ * config/tc-mips.c (mips_cpu_info_table): Add loongson3a in MIPS 64. * doc/c-mips.texi (MIPS cpu): Add loongson3a. include/ * elf/mips.h (E_MIPS_MACH_LS3A): Defined. * opcode/mips.h (INSN_LOONGSON_3A): Defined. (CPU_LOONGSON_3A): Defined. (OPCODE_IS_MEMBER): Add LOONGSON_3A. opcodes/ * mips-dis.c (mips_arch_choices): Add loongson3a. * mips-opc.c (IL3A): Defined as INSN_LOONGSON_3A. (mips_builtin_opcodes): Modify some instructions' membership from IL2F to IL2F|IL3A, since these instructions are supported by Loongson_3A.
2010-10-28 * mips-opc.c (mips_builtin_opcodes): Fix formatting of "ld".Maciej W. Rozycki1-1/+1
2010-10-252010-10-25 Chao-ying Fu <fu@mips.com>Chao-ying Fu1-6/+6
* mips-opc.c (madd, maddu, msub, msubu, mult, multu): Change D33 to D32.
2010-10-18 opcodes/Maciej W. Rozycki1-2/+4
* mips-opc.c (mips_builtin_opcodes): Move M_LD_OB and M_SD_OB macros before their corresponding MIPS III hardware instructions. gas/ * config/tc-mips.c (macro)[M_LD_OB, M_SD_OB]: Handle 64-bit ABIs. gas/testsuite/ * gas/mips/lineno.s: Convert to o32. * gas/mips/lineno.d: Adjust patterns accordingly. Force the o32 ABI.
2010-09-14 opcodes/Maciej W. Rozycki1-0/+5
* mips-opc.c (mips_builtin_opcodes): Add "sync_acquire", "sync_mb", "sync_release", "sync_rmb" and "sync_wmb". gas/testsuite/ * gas/mips/mips32r2-sync.d: New test for MIPS32r2 "sync" instruction variants. * gas/mips/octeon@mips32r2-sync.d: Likewise, Octeon version. * gas/mips/mips32r2-sync.s: Source for the new test. * gas/mips/mips.exp: Run the new test.
2010-05-262010-05-26 Catherine Moore <clm@codesourcery.com>Catherine Moore1-2/+2
David Ung <davidu@mips.com> * mips-opc.c: Change membership to I1 for instructions ssnop and ehb. 2010-05-26 Catherine Moore <clm@codesoucery.com> Maxim Kuvyrkov <maxim@codesourcery.com> * gas/mips/set-arch.d: Expect ehb.
2010-05-26 gas/Catherine Moore1-4/+1
* config/tc-mips.c (is_opcode_valid): Remove expansionp. (macro_build): Change invocation of is_opcode_valid. (mips_ip): Likewise. gas/testsuite/ * gas/mips/mips-no-jalx.l: Delete. * gas/mips/mips-no-jalx.s: Delete. * gas/mips/mips-jalx-2.d: New. * gas/mips/mips-jalx-2.s: New. * gas/mips/mips.exp (mips-jalx-2): Run new test. (mips-no-jalx): Remove deleted test. include/ * opcode/mips.h (INSN_MIPS16): Remove. opcodes/ * mips-dis.c (mips_arch): Remove INSN_MIPS16. * mips-opc.c (I16): Remove. (mips_builtin_op): Reclassify jalx.
2009-09-02update copyright datesAlan Modra1-1/+1
2009-02-18opcodes/Adam Nemet1-2/+2
* mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific dmfc2 and dmtc2 before the architecture-level variants. gas/testsuite/ * gas/mips/octeon.s: Add more tests for dmfc2 and dmtc2. * gas/mips/octeon.d: Update. * gas/mips/octeon-ill.l: Update error message.
2009-02-03bfd:Joseph Myers1-0/+15
2009-02-03 Sandip Matte <sandip@rmicorp.com> * aoutx.h (NAME (aout, machine_type)): Handle bfd_mach_mips_xlr. * archures.c (bfd_mach_mips_xlr): Define. * bfd-in2.h: Regenerate. * cpu-mips.c (I_xlr): Define. (arch_info_struct): Add XLR entry. * elfxx-mips.c (_bfd_elf_mips_mach): Handle E_MIPS_MACH_XLR. (mips_set_isa_flags): Handle bfd_mach_mips_xlr (mips_mach_extensions): Add XLR entry. binutils: 2009-02-03 Sandip Matte <sandip@rmicorp.com> * readelf.c (get_machine_flags): Handle E_MIPS_MACH_XLR. gas: 2009-02-03 Sandip Matte <sandip@rmicorp.com> * config/tc-mips.c (macro): Handle M_MSGSND, M_MSGLD, M_MSGLD_T, M_MSGWAIT and M_MSGWAIT_T. (mips_cpu_info_table): Add XLR entry. * doc/c-mips.texi (-march): Document xlr. gas/testsuite: 2009-02-03 Sandip Matte <sandip@rmicorp.com> * gas/mips/mips.exp (xlr): New architecture. (xlr-ext): Run test. * gas/mips/xlr-ext.d, gas/mips/xlr-ext.s: New. include/elf: 2009-02-03 Sandip Matte <sandip@rmicorp.com> * mips.h (E_MIPS_MACH_XLR): Define. include/opcode: 2009-02-03 Sandip Matte <sandip@rmicorp.com> * mips.h (INSN_XLR): Define. (INSN_CHIP_MASK): Update. (CPU_XLR): Define. (OPCODE_IS_MEMBER): Update. (M_MSGSND, M_MSGLD, M_MSGLD_T, M_MSGWAIT, M_MSGWAIT_T): Define. opcodes: 2009-02-03 Sandip Matte <sandip@rmicorp.com> * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define. (mips_arch_choices): Add XLR entry. * mips-opc.c (XLR): Define. (mips_builtin_opcodes): Add XLR instructions.
2009-01-28* mips-opc.c (suxc1): Add the flag of FP_D.Nick Clifton1-2/+2
2008-11-062008-11-06 Chao-ying Fu <fu@mips.com>Chao-ying Fu1-4/+5
* mips-opc.c (synciobdma, syncs, syncw, syncws): Move these before sync. (sync): New instruction with 5-bit sync type. * mips-dis.c (print_insn_args: Add case '1' to print 5-bit values.
2008-07-07 * mips-opc.c (CP): New macro.Adam Nemet1-19/+22
(mips_builtin_opcodes): Mark c0, c2 and c3 as CP. Add Octeon to the membership of di, dmfc0, dmtc0, ei, mfc0 and mtc0. Add dmfc2 and dmtc2 Octeon instructions.
2008-06-12 * mips.h: Document new field descriptors +Q.Nick Clifton1-0/+4
(OP_SH_SEQI, OP_MASK_SEQI): New bit mask and shift count for SEQI. opcodes/ * mips-dis.c (print_insn_args): Handle field descriptor +Q. * mips-opc.c (mips_builtin_opcodes): Add Octeon instructions seq, seqi, sne and snei. gas/ * config/tc-mips.c (validate_mips_insn): Handle field descriptor +Q. (mips_ip): Likewise. (macro_build): Likewise. (CPU_HAS_SEQ): New macro. (macro2) <M_SEQ_I, M_SNE_I>: Use it. Emit seq/sne and seqi/snei. gas/testsuite/ * gas/mips/octeon.s, gas/mips/octeon.d: Add tests for seq* and sne*. * gas/mips/octeon-ill.s, gas/mips/octeon-ill.s: Add tests for seqi and snei.
2008-06-12include/opcode/Nick Clifton1-0/+28
* mips.h: Document new field descriptors +x, +X, +p, +P, +s, +S. Update comment before MIPS16 field descriptors to mention MIPS16. (OP_SH_BBITIND, OP_MASK_BBITIND): New bit mask and shift count for BBIT. (OP_SH_CINSPOS, OP_MASK_CINSPOS, OP_SH_CINSLM1, OP_MASK_CINSLM1): New bit masks and shift counts for cins and exts. gas/ * config/tc-mips.c (validate_mips_insn): Handle field descriptors +x, +X, +p, +P, +s, +S. (mips_ip): Likewise. opcodes/ * mips-dis.c (print_insn_args): Handle field descriptors +x, +p, +s, +S. * mips-opc.c (mips_builtin_opcodes): Add Octeon instructions baddu, bbit*, cins*, dmul, pop, dpop, exts*, mtm*, mtp*, syncs, syncw, syncws, vm3mulu, vm0 and vmulu. gas/testsuite/ * gas/mips/octeon.s, gas/mips/octeon.d: Add tests for baddu, bbit*, cins*, dmul, pop, dpop, exts*, mtm*, mtp*, syncs, syncw, syncws, vm3mulu, vm0 and vmulu. * gas/mips/octeon-ill.s, gas/mips/octeon-ill.s: New test. * gas/mips/mips.exp: Run it. Run octeon test with run_dump_test_arches.
2008-04-29 * mips-opc.c (mips_builtin_opcodes): Set field `match' to 0 forAdam Nemet1-4/+4
the two drem and the two dremu macros.
2008-04-28 * mips-opc.c (mips_builtin_opcodes): Mark prefx and c1Adam Nemet1-23/+23
instructions FP_S. Mark l.s, li.s, lwc1, swc1, s.s, trunc.w.s and cop1 macros INSN2_M_FP_S. Mark l.d, li.d, ldc1 and sdc1 macros INSN2_M_FP_D. Mark trunc.w.d macro INSN2_M_FP_S and INSN2_M_FP_D.
2008-02-04 * mips-dis.c: Update copyright.Adam Nemet1-1/+3
(mips_arch_choices): Add Octeon. * mips-opc.c: Update copyright. (IOCT): New macro. (mips_builtin_opcodes): Add Octeon instruction synciobdma.
2007-11-29 bfd/Mark Shinwell1-36/+271
* archures.c (bfd_mach_mips_loongson_2e): New. (bfd_mach_mips_loongson_2f): New. * bfd-in2.h (bfd_mach_mips_loongson_2e): New. (bfd_mach_mips_loongson_2f): New. * cpu-mips.c: Add I_loongson_2e and I_loongson_2f to anonymous enum. (arch_info_struct): Add Loongson-2E and Loongson-2F entries. * elfxx-mips.c (_bfd_elf_mips_mach): Handle Loongson-2E and Loongson-2F flags. (mips_set_isa_flags): Likewise. (mips_mach_extensions): Add Loongson-2E and Loongson-2F entries. binutils/ * readelf.c (get_machine_flags): Handle Loongson-2E and -2F flags. gas/ * config/tc-mips.c (mips_cpu_info_table): Add loongson2e and loongson2f entries. * doc/c-mips.texi: Document -march=loongson{2e,2f} options. gas/testsuite/ * gas/mips/mips.exp: Add loongson-2e and -2f tests. * gas/mips/loongson-2e.d: New. * gas/mips/loongson-2e.s: New. * gas/mips/loongson-2f.d: New. * gas/mips/loongson-2f.s: New. include/elf/ * mips.h (E_MIPS_MACH_LS2E): New. (E_MIPS_MACH_LS2F): New. include/opcode/ * mips.h (INSN_LOONGSON_2E): New. (INSN_LOONGSON_2F): New. (CPU_LOONGSON_2E): New. (CPU_LOONGSON_2F): New. (OPCODE_IS_MEMBER): Update for Loongson-2E and -2F flags. opcodes/ * mips-dis.c (mips_arch_choices): Add Loongson-2E and -2F entries. * mips-opc.c (IL2E): New. (IL2F): New. (mips_builtin_opcodes): Add Loongson-2E and -2F instructions. Allow movz and movn for Loongson-2E and -2F. Add movnz entry. Move coprocessor encodings to the end of the table. Allow certain MIPS V .ps instructions on the Loongson-2E and -2F.
2007-11-29 include/opcode/Mark Shinwell1-138/+143
* mips.h (INSN_ISA*): Redefine certain values as an enumeration. Update comments. (mips_isa_table): New. (ISA_MIPS*): Redefine to match enumeration. (OPCODE_IS_MEMBER): Modify to correctly test new INSN_ISA* values. opcodes/ * mips-opc.c (I3_32, I3_33, I4_32, I4_33, I5_33): New. (mips_builtin_opcodes): Use these new I* values.
2007-10-04opcodes/David Daney1-1/+1
2007-10-04 David Daney <ddaney@avtrex.com> * mips-opc.c (mips_builtin_opcodes): Mark lwxc1 as working on FP_S registers. gas/testsuite/ 2007-10-04 David Daney <ddaney@avtrex.com> * gas/mips/odd-float.d, gas/mips/odd-float.s: New test. * gas/mips/mips.exp: Run it.
2007-07-05Change source files over to GPLv3.Nick Clifton1-13/+14
2007-02-20 [ gas/ChangeLog ]Thiemo Seufer1-0/+55
* config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2, ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support. (macro_build): Add case '2'. (macro): Expand M_BALIGN to nop, packrl.ph or balign. (validate_mips_insn): Add support for balign instruction. (mips_ip): Handle DSP R2 instructions. Support balign instruction. (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE, md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2 command line options. (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives. (md_show_usage): Add -mdspr2 and -mno-dspr2 help output. * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2, .set dspr2, .set nodspr2. [ gas/testsuite/ChangeLog ] * gas/mips/mips32-dspr2.s, gas/mips/mips32-dspr2.d: New test for DSP R2. * gas/mips/mips.exp: Run new test. [ include/opcode/Changelog ] * mips.h (OP_SH_BP, OP_MASK_BP): Add support for balign instruction. (INSN_DSPR2): Add flag for DSP R2 instructions. (M_BALIGN): New macro. [ opcodes/ChangeLog ] * mips-dis.c (mips_arch_choices): Add DSP R2 support. (print_insn_args): Add support for balign instruction. * mips-opc.c (D33): New shortcut for DSP R2 instructions. (mips_builtin_opcodes): Add DSP R2 instructions. [ sim/mips/ChangeLog ] * Makefile.in (IGEN_INCLUDE): Add dsp2.igen. * configure.ac (mips*-sde-elf*, mipsisa32r2*-*-*, mipsisa64r2*-*-*): Add dsp2 to sim_igen_machine. * configure: Regenerate. * dsp.igen (do_ph_op): Add MUL support when op = 2. (do_ph_mulq): New function to support mulq_rs.ph and mulq_s.ph. (mulq_rs.ph): Use do_ph_mulq. (MFHI, MFLO, MTHI, MTLO): Move these instructions to mips.igen. * mips.igen: Add dsp2 model and include dsp2.igen. (MFHI, MFLO, MTHI, MTLO): Extend these instructions for for *mips32r2, *mips64r2, *dsp. (MADD, MADDU, MSUB, MSUBU, MULT, MULTU): Extend these instructions for *mips32r2, *mips64r2, *dsp2. * dsp2.igen: New file for MIPS DSP REV 2 ASE. [ sim/testsuite/sim/mips/ChangeLog ] * basic.exp: Run the dsp2 test. * utils-dsp.inc (dspckacc_astio, dspck_tsimm): New macro. * mips32-dsp2.s: New test.
2006-06-06 [ gas/ChangeLog ]Thiemo Seufer1-1/+130
* config/tc-mips.c (ISA_SUPPORTS_DSP64): New macro. (CPU_HAS_MIPS3D, CPU_HAS_MDMX, CPU_HAS_DSP, CPU_HAS_MT): Delete. (macro_build): Update comment. (mips_ip): Allow DSP64 instructions for MIPS64R2. (mips_after_parse_args): Remove uses of CPU_HAS_MIPS3D and CPU_HAS_MDMX. (mips_cpu_info): Fix formatting. Add MIPS_CPU_ASE_MIPS3D and MIPS_CPU_ASE_MDMX flags for sb1. [ gas/testsuite/ChangeLog ] * gas/mips/mips64-dsp.s, gas/mips/mips64-dsp.d: New DSP64 tests. * gas/mips/mips.exp: Run DSP64 tests. [ opcodes/ChangeLog ] * mips-dis.c: Disassemble DSP64 instructions for MIPS64R2. * mips-opc.c: Add DSP64 instructions.
2006-05-05 [ gas/ChangeLog ]Thiemo Seufer1-0/+1
* config/tc-mips.c (macro_build): Add case 'k' to handle cache instruction. (macro): Add new case M_CACHE_AB. [ opcodes/ChangeLog ] * mips-opc.c: Add macro for cache instruction. [ include/opcode/ChangeLog ] * mips.h (enum): Add macro M_CACHE_AB.
2006-05-04[ gas/testsuite/ChangeLog ]Thiemo Seufer1-101/+131
2006-05-04 Thiemo Seufer <ths@mips.com> Nigel Stephens <nigel@mips.com> * gas/mips/mips.exp: Run mips32-dsp tests only for mips32r2. * gas/mips/set-arch.d: Adjust according to opcode table changes. [ include/opcode/ChangeLog ] 2006-05-04 Thiemo Seufer <ths@mips.com> Nigel Stephens <nigel@mips.com> David Ung <davidu@mips.com> * mips.h: Add INSN_SMARTMIPS define. [ opcodes/ChangeLog ] 2006-05-04 Thiemo Seufer <ths@mips.com> Nigel Stephens <nigel@mips.com> David Ung <davidu@mips.com> * mips-dis.c (mips_arch_choices): Add smartmips instruction decoding to MIPS32 and MIPS32R2. Limit DSP decoding to release 2 ISAs. Add MIPS3D decoding to MIPS32R2. Add MT decoding to MIPS64R2. * mips-opc.c: fix random typos in comments. (INSN_SMARTMIPS): New defines. (mips_builtin_opcodes): Add paired single support for MIPS32R2. Move bc3f, bc3fl, bc3t, bc3tl downwards. Move flushi, flushd, flushid, wb upwards. Move cfc3, ctc3 downwards. Rework the FP_S and FP_D flags to denote single and double register accesses separately. Move dmfc3, dmtc3, mfc3, mtc3 downwards. Allow jr.hb and jalr.hb for release 1 ISAs. Allow luxc1, suxc1 for MIPS32R2. Add SmartMIPS instructions. Add two-argument variants of bc2f, bc2fl, bc2t, bc2tl. Add mfhc2, mthc2 to release 2 ISAs. * mips16-opc.c (mips16_opcodes): Add sdbbp instruction.
2006-05-032006-05-03 Thiemo Seufer <ths@mips.com>Thiemo Seufer1-1/+1
[ opcodes/ChangeLog ] * mips-opc.c (mips_builtin_opcodes): Fix mftr argument order. [ gas/testsuite/ChangeLog ] * gas/mips/mips32-mt.d: Fix mftr argument order.
2006-04-30[ gas/ChangeLog ]Thiemo Seufer1-0/+66
2006-04-30 Thiemo Seufer <ths@mips.com> David Ung <davidu@mips.com> * config/tc-mips.c (validate_mips_insn): Handling of udi cases. (mips_immed): New table that records various handling of udi instruction patterns. (mips_ip): Adds udi handling. [ include/opcode/ChangeLog ] 2006-04-30 Thiemo Seufer <ths@mips.com> David Ung <davidu@mips.com> * mips.h: Defines udi bits and masks. Add description of characters which may appear in the args field of udi instructions. [ opcodes/ChangeLog ] 2006-04-30 Thiemo Seufer <ths@mips.com> David Ung <davidu@mips.com> * mips-opc.c (mips_builtin_opcodes): Add udi instructions "udi0" to "udi15". * mips-dis.c (print_insn_args): Adds udi argument handling.
2006-01-26* mips-opc.c: Add I33 masks to these MIPS32R2 instructions: prefx,David Ung1-48/+48
ceil.l.d, ceil.l.s, cvt.d.l, cvt.l.d, cvt.l.s, cvt.s.l, floor.l.d, floor.l.s, ldxc1, lwxc1, madd.d, madd.s, msub.d, msub.s, nmadd.d, nmadd.s, nmsub.d, nmsub.s, recip.d, recip.s, round.l.d, rsqrt.d, rsqrt.s, sdxc1, swxc1, trunc.l.d, trunc.l.s.
2005-09-06* mips-opc.c (MT32): New define.Chao-ying Fu1-4/+62
(mips_builtin_opcodes): Move "bc0f", "bc0fl", "bc0t", "bc0tl" to the bottom to avoid opcode collision with "mftr" and "mttr". Add MT instructions. * mips-dis.c (mips_arch_choices): Enable INSN_MT for mips32r2. (print_insn_args): Add supports for +t, +T, !, $, *, &, g operand formats.
2005-08-25* mips-opc.c (WR_a, RD_a, MOD_a, DSP_VOLA, D32): New define.Chao-ying Fu1-0/+137
(mips_builtin_opcodes): Add DSP instructions. * mips-dis.c (mips_arch_choices): Enable INSN_DSP for mips32, mips32r2, mips64, mips64r2. (print_insn_args): Add supports for 3, 4, 5, 6, 7, 8, 9, 0, :, ', @ operand formats.
2005-05-07Update the address and phone number of the FSFNick Clifton1-1/+1
2005-03-03update copyright datesAlan Modra1-1/+1
2005-01-21 2005-01-21 Fred Fish <fnf@specifixinc.com>Fred Fish1-13/+13
* mips-opc.c: Change INSN_ALIAS to INSN2_ALIAS. Change INSN_WRITE_MDMX_ACC to INSN2_WRITE_MDMX_ACC. Change INSN_READ_MDMX_ACC to INSN2_READ_MDMX_ACC. * mips-dis.c: Ditto.
2005-01-19 2005-01-19 Fred Fish <fnf@specifixinc.com>Fred Fish1-1031/+1031
* mips-dis.c (no_aliases): New disassembly option flag. (set_default_mips_dis_options): Init no_aliases to zero. (parse_mips_dis_option): Handle no-aliases option. (print_insn_mips): Ignore table entries that are aliases if no_aliases is set. (print_insn_mips16): Ditto. * mips-opc.c (mips_builtin_opcodes): Add initializer column for new pinfo2 member and add INSN_ALIAS initializers as needed. Also move WR_MACC and RD_MACC initializers from pinfo to pinfo2. * mips16-opc.c (mips16_opcodes): Ditto.
2004-07-20opcodes/Maciej W. Rozycki1-16/+28
* mips-opc.c (mips_builtin_opcodes): Move coprocessor 2 move/branch operations to the bottom so that VR5400 multimedia instructions take precedence in disassembly. gas/testsuite/ * gas/mips/vr5400.d: Update for a correct disassembly of "racm.ob".
2004-07-20opcodes/Maciej W. Rozycki1-1/+0
* mips-opc.c (mips_builtin_opcodes): Remove the MIPS32 ISA-specific "break" encoding. gas/testsuite/ * gas/mips/mips32.s: Adjust for the unified "break" syntax. Add another "break" case. Update the comment accordingly. * gas/mips/set-arch.s: Likewise. * gas/mips/mips32.d: Adjust for the new output. * gas/mips/set-arch.d: Likewise.
2003-11-18* config/tc-mips.c (macro): Handle new macros: "lca" and "dlca"Maciej W. Rozycki1-0/+2
for loading addresses using CALL relocations. Don't emit CALL relocations when a base register is used. * gas/mips/lca-svr4pic.d: New test for the "lca" macro. * gas/mips/lca-xgot.d: Likewise. * gas/mips/lca.s: Source for the new tests. * gas/mips/mips.exp: Run the new tests. * opcode/mips.h: Define new enum members, M_LCA_AB and M_DLCA_AB. * mips-opc.c (mips_builtin_opcodes): Handle new macros: "lca" and "dlca".
2003-09-30[ bfd/ChangeLog ]Chris Demetriou1-3/+20
2003-09-30 Chris Demetriou <cgd@broadcom.com> * archures.c (bfd_mach_mipsisa64r2): New define. * bfd-in2.h: Regenerate. * aoutx.h (NAME(aout,machine_type)): Handle bfd_mach_mipsisa64r2. * cpu-mips.c (I_mipsisa64r2): New enum value. (arch_info_struct): Add entry for I_mipsisa64r2. * elfxx-mips.c (_bfd_elf_mips_mach) (_bfd_mips_elf_print_private_bfd_data): Handle E_MIPS_ARCH_64R2. (mips_set_isa_flags): Add bfd_mach_mipsisa64r2 case. (mips_mach_extensions): Add entry for bfd_mach_mipsisa64r2. [ binutils/ChangeLog ] 2003-09-30 Chris Demetriou <cgd@broadcom.com> * readelf.c (get_machine_flags): Handle E_MIPS_ARCH_64R2. [ gas/Changelog ] 2003-09-30 Chris Demetriou <cgd@broadcom.com> * configure.in (mipsisa64r2, mipsisa64r2el, mipsisa64r2*): New CPUs. * configure: Regenerate. * config/tc-mips.c (imm2_expr): New variable. (md_assemble, mips16_ip): Initialize imm2_expr. (ISA_HAS_64BIT_REGS, ISA_HAS_DROR, ISA_HAS_ROR): Add ISA_MIPS64R2. (macro_build): Handle +A, +B, +C, +E, +F, +G, and +H format operands. (macro): Handle M_DEXT and M_DINS. (validate_mips_insn): Handle +E, +F, +G, +H, and +I format operands. (mips_ip): Likewise. (OPTION_MIPS64R2): New define. (md_longopts): New entry for -mips64r2 (OPTION_MIPS64R2). OPTION_ASE_BASE): Increase to compensate for OPTION_MIPS64R2. (md_parse_option): Handle OPTION_MIPS64R2. (s_mipsset): Handle setting "mips64r2" ISA. (mips_cpu_info_table): Add mips64r2. (md_show_usage): Document -mips64r2 option. * doc/as.texinfo: Docuemnt -mips64r2 option. * doc/c-mips.texi: Likewise. [ gas/testsuite/ChangeLog ] 2003-09-30 Chris Demetriou <cgd@broadcom.com> * gas/mips/cp0-names-mips64r2.d: New file. * gas/mips/cp0sel-names-mips64r2.d: New file. * gas/mips/elf_arch_mips64r2.d: New file. * gas/mips/hwr-names-mips64r2.d: New file. * gas/mips/mips32r2-ill-fp64.l: New file. * gas/mips/mips32r2-ill-fp64.s: New file. * gas/mips/mips64r2-ill.l: New file. * gas/mips/mips64r2-ill.s: New file. * gas/mips/mips64r2.d: New file. * gas/mips/mips64r2.s: New file. * gas/mips/mips.exp: Define "mips64r2" arch, and run new tests. [ include/elf/ChangeLog ] 2003-09-30 Chris Demetriou <cgd@broadcom.com> * mips.h (E_MIPS_ARCH_64R2): New define. [ include/opcode/ChangeLog ] 2003-09-30 Chris Demetriou <cgd@broadcom.com> * mips.h: Document +E, +F, +G, +H, and +I operand types. Update documentation of I, +B and +C operand types. (INSN_ISA64R2, ISA_MIPS64R2, CPU_MIPS64R2): New defines. (M_DEXT, M_DINS): New enum values. [ ld/ChangeLog ] 2003-09-30 Chris Demetriou <cgd@broadcom.com> * ldmain.c (get_emulation): Ignore "-mips64r2". [ ld/testsuite/ChangeLog ] 2003-09-30 Chris Demetriou <cgd@broadcom.com> * ld-mips-elf/mips-elf-flags.exp: Add tests for combinations with MIPS64r2. [ opcodes/ChangeLog ] 2003-09-30 Chris Demetriou <cgd@broadcom.com> * mips-dis.c (mips_arch_choices): Add entry for "mips64r2" (print_insn_args): Add handing for +E, +F, +G, and +H. * mips-opc.c (I65): New define for MIPS64r2. (mips_builtin_opcodes): Add "dext", "dextm", "dextu", "dins", "dinsm", "dinsu", "drotl", "drotr", "drotr32", "drotrv", "dsbh", and "dshd" for MIPS64r2. Adjust "dror", "dror32", and "drorv" to be supported on MIPS64r2.
2003-01-012002-12-31 Chris Demetriou <cgd@broadcom.com>Chris Demetriou1-5/+5
* mips-opc.c (mips_builtin_opcodes): Move "di" into the right order alphabetically, and make all hex constants use lower-case letters.
2002-12-31[ gas/ChangeLog ]Chris Demetriou1-0/+4
2002-12-31 Chris Demetriou <cgd@broadcom.com> * config/tc-mips.c (validate_mips_insn, mips_ip): Recognize the "+D" operand, which will be used only by the disassembler. [ gas/testsuite/ChangeLog ] 2002-12-31 Chris Demetriou <cgd@broadcom.com> * gas/mips/cp0sel-names-mips32.d: New test. * gas/mips/cp0sel-names-mips32r2.d: New test. * gas/mips/cp0sel-names-mips64.d: New test. * gas/mips/cp0sel-names-numeric.d: New test. * gas/mips/cp0sel-names-sb1.d: New test. * gas/mips/cp0sel-names.s: New test source file. * gas/mips/mips.exp: Run new tests. [ include/opcode/ChangeLog ] 2002-12-31 Chris Demetriou <cgd@broadcom.com> * mips.h: Note that the "+D" operand type name is now used. [ opcodes/ChangeLog ] 2002-12-31 Chris Demetriou <cgd@broadcom.com> * mips-dis.c (mips_cp0sel_name): New structure. (mips_cp0sel_names_mips3264, mips_cp0sel_names_mips3264r2) (mips_cp0sel_names_sb1): New arrays. (mips_arch_choice): New structure members "cp0sel_names" and "cp0sel_names_len". (mips_arch_choices): Add references to new cp0sel_names arrays as appropriate, and make all existing entries reference appropriate mips_XXX_names_numeric arrays rather than simply using NULL. (mips_cp0sel_names, mips_cp0sel_names_len): New variables. (lookup_mips_cp0sel_name): New function. (set_default_mips_dis_options): Set mips_cp0sel_names and mips_cp0sel_names_len as appropriate. Remove now-unnecessary checks for NULL register name arrays. (parse_mips_dis_option): Likewise. (print_insn_arg): Handle "+D" operand type. * mips-opc.c (mips_builtin_opcodes): Add new "+D" variants of mfc0, mtc0, dmfc0, and dmtc0 to print CP0+sel register names symbolically.
2002-12-31[ bfd/ChangeLog ]Chris Demetriou1-5/+35
2002-12-30 Chris Demetriou <cgd@broadcom.com> * aoutx.h (NAME(aout,machine_type)): Add bfd_mach_mipsisa32r2 case. * archures.c (bfd_mach_mipsisa32r2): New define. * bfd-in2.h: Regenerate. * cpu-mips.c (I_mipsisa32r2): New enum value. (arch_info_struct): Add entry for I_mipsisa32r2. * elfxx-mips.c (elf_mips_isa, _bfd_elf_mips_mach) (_bfd_mips_elf_print_private_bfd_data): Handle E_MIPS_ARCH_32R2. (_bfd_mips_elf_final_write_processing): Add bfd_mach_mipsisa32r2 case. (_bfd_mips_elf_merge_private_bfd_data): Handle merging of binaries marked as using MIPS32 Release 2. [ binutils/ChangeLog ] 2002-12-30 Chris Demetriou <cgd@broadcom.com> * doc/binutils.texi (objdump): Note MIPS HWR (Hardware Register) changes in MIPS -M options. [ gas/ChangeLog ] 2002-12-30 Chris Demetriou <cgd@broadcom.com> * configure.in: Recognize mipsisa32r2, mipsisa32r2el, and CPU variants. * configure: Regenerate. * config/tc-mips.c (ISA_HAS_DROR, ISA_HAS_ROR): New defines. (macro_build): Handle "K" operand. (macro2): Use ISA_HAS_DROR and ISA_HAS_ROR in the places where CPU_HAS_DROR and CPU_HAS_ROR are currently used. (mips_ip): New variable "lastpos", and implement "+A", "+B", and "+C" operands for MIPS32 Release 2 ins/ext instructions. Implement "K" operand for MIPS32 Release 2 rdhwr instruction. (validate_mips_insn): Implement "+" as a way to extend the allowed operands, and implement "K", "+A", "+B", and "+C" operands. (OPTION_MIPS32R2): New define. (md_longopts): Add entry for OPTION_MIPS32R2. (OPTION_ELF_BASE): Adjust to accomodate OPTIONS_MIPS32R2. (md_parse_option): Handle OPTION_MIPS32R2. (s_mipsset): Reimplement handling of ".set mipsN" options and add support for ".set mips32r2". (mips_cpu_info_table): Add entry for "mips32r2" (MIPS32 Release 2). (md_show_usage): Document "-mips32r2" option. * doc/as.texinfo: Document "-mips32r2" option. * doc/c-mips.texi: Likewise. [ gas/testsuite/ChangeLog ] 2002-12-30 Chris Demetriou <cgd@broadcom.com> * gas/mips/cp0-names-mips32r2.d: New test. * gas/mips/hwr-names-mips32r2.d: New test. * gas/mips/hwr-names-numeric.d: New test. * gas/mips/hwr-names.s: New test source file. * gas/mips/mips32r2.d: New test. * gas/mips/mips32r2.s: New test source file. * gas/mips/mips32r2-ill.l: New test. * gas/mips/mips32r2-ill.s: New test source file. * gas/mips/mips.exp: Add mips32r2 architecture data array entry. Run new tests mentioned above. [ include/elf/ChangeLog ] 2002-12-30 Chris Demetriou <cgd@broadcom.com> * mips.h (E_MIPS_ARCH_32R2): New define. [ include/opcode/ChangeLog ] 2002-12-30 Chris Demetriou <cgd@broadcom.com> * mips.h: Document "+" as the start of two-character operand type names, and add new "K", "+A", "+B", and "+C" operand types. (OP_MASK_INSMSB, OP_SH_INSMSB, OP_MASK_EXTMSB) (OP_SH_EXTMSB, INSN_ISA32R2, ISA_MIPS32R2, CPU_MIPS32R2): New defines. [ opcodes/ChangeLog ] 2002-12-30 Chris Demetriou <cgd@broadcom.com> * mips-dis.c (mips_cp0_names_mips3264r2, mips_hwr_names_numeric) (mips_hwr_names_mips3264r2): New arrays. (mips_arch_choice): New "hwr_names" member. (mips_arch_choices): Adjust for structure change, and add a new entry for "mips32r2" ISA. (mips_hwr_names): New variable. (set_default_mips_dis_options): Set mips_hwr_names. (parse_mips_dis_option): New "hwr-names" option which sets mips_hwr_names, and adjust "reg-names=ARCH" to set mips_hwr_names. (print_insn_arg): Change return type to "int" and use that to indicate number of characters consumed. Add support for "+" operand extension character, "+A", "+B", "+C", and "K" operands. (print_insn_mips): Adjust for changes to print_insn_arg. (print_mips_disassembler_options): Adjust for "hwr-names" addition and "reg-names" change. * mips-opc (I33): New define (shorthand for INSN_ISA32R2). (mips_builtin_opcodes): Note that "nop" and "ssnop" are special forms of "sll". Add new MIPS32 Release 2 instructions: ehb, di, ei, ext, ins, jr.hb, jalr.hb, mfhc1, mfhc2, mthc1, mthc2, rdhwr, rdpgpr, seb, seh, synci, wrpgpr, wsbh. Note that hardware rotate instructions (ror, rorv) can be used on MIPS32 Release 2, and add the official mnemonics for them (rotr, rotrv) and the similar "rotl" mnemonic for left-rotate.
2002-12-18[ opcodes/ChangeLog ]Chris Demetriou1-8/+5
2002-12-18 Chris Demetriou <cgd@broadcom.com> * mips-opc.c (mips_builtin_opcodes): Remove one "ror" and two "dror" entries, and reorder the remaining "dror" and "ror" entries. [ gas/ChangeLog ] 2002-12-18 Chris Demetriou <cgd@broadcom.com> * config/tc-mips.c (macro): In M_DROL, M_DROR, M_ROL, and M_ROR, use hardware rotate ops as appropriate. In M_DROL_I, M_DROR_I, M_ROL_I, and M_ROR_I, simplify code, clean up warnings, and arrange not to issue warnings about use of AT when AT is not actually used. [ gas/testsuite/ChangeLog ] 2002-12-18 Chris Demetriou <cgd@broadcom.com> * gas/mips/rol.s: Add ".set noat" and some new instructions to test. * gas/mips/rol64.s: Likewise. * gas/mips/rol.l: New file. * gas/mips/rol.d: Adjust to use rol.l and for rol.s changes. * gas/mips/rol64.l: New file. * gas/mips/rol64.d: Adjust to use rol64.l and for rol64.s changes. * gas/mips/rol-hw.d: New file. * gas/mips/rol-hw.l: New file. * gas/mips/rol64-hw.d: New file. * gas/mips/rol64-hw.l: New file. * gas/mips/mips.exp: Run rol-hw and rol64-hw tests.
2002-09-30[include/opcode/]Richard Sandiford1-21/+138
* mips.h: Update comment for new opcodes. (OP_MASK_VECBYTE, OP_SH_VECBYTE): New. (OP_MASK_VECALIGN, OP_SH_VECALIGN): New. (INSN_4111, INSN_4120, INSN_5400, INSN_5500): New. (CPU_VR4120, CPU_VR5400, CPU_VR5500): New. (OPCODE_IS_MEMBER): Handle the new CPU_* values and INSN_* flags. Don't match CPU_R4111 with INSN_4100. [opcodes/] * mips-dis.c (print_insn_arg): Handle '[', ']', 'e' and '%'. (mips_isa_type): Handle bfd_mach_mips4120, bfd_mach_mips5400 and bfd_mach_mips5500. * mips-opc.c (V1): Include INSN_4111 and INSN_4120. (N411, N412, N5, N54, N55): New convenience defines. (mips_builtin_opcodes): Add vr4120, vr5400 and vr5500 opcodes. Change dmadd16 and madd16 from V1 to N411.
generated by cgit v1.1 at 2025-01-12 02:14:14 +0000