| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
binutils:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* readelf.c (print_mips_isa_ext): Print the value of Octeon3.
gas:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* config/tc-mips.c (CPU_IS_OCTEON): Handle CPU_OCTEON3.
(mips_cpu_info_table): Octeon3 enables virt ase.
* doc/c-mips.texi: Document octeon3 as an acceptable value for
-march=.
gas/testsuite:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* gas/mips/mips.exp: Add support for Octeon3 architecture.
Also add in support for running Octeon3 tests.
* gas/mips/octeon3.d: New test.
* gas/mips/octeon3.s: New test source.
opcodes:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* mips-dis.c (mips_arch_choices): Add octeon3.
* mips-opc.c (IOCT): Include INSN_OCTEON3.
(IOCT2): Likewise.
(IOCT3): New define.
(IVIRT): New define.
(mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0,
tlbinv, tlbinvf, tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp, tlti
IVIRT instructions.
Extend mtm0, mtm1, mtm2, mtp0, mtp1, mtp2 instructions to take another
operand for IOCT3.
bfd:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* archures.c: Add octeon3 for mips target.
* bfd-in2.h: Regenerate.
* bfd/cpu-mips.c: Define I_mipsocteon3.
nfo_struct): Add octeon3 support.
* bfd/elfxx-mips.c: (_bfd_elf_mips_mach): Add support for
octeon3.
(mips_set_isa_flags): Add support for octeon3.
(bfd_mips_isa_ext): Add bfd_mach_mips_octeon3.
(mips_mach_extensions): Make bfd_mach_mips_octeon3 an
extension of bfd_mach_mips_octeon2.
(print_mips_isa_ext): Print the value of Octeon3.
|
|
bfd/
* aoutx.h (NAME (aout, machine_type)): Add mips32r6 and mips64r6.
* archures.c (bfd_architecture): Likewise.
* bfd-in2.h (bfd_architecture): Likewise.
(bfd_reloc_code_real): Add relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
* cpu-mips.c (arch_info_struct): Add mips32r6 and mips64r6.
* elf32-mips.c: Define relocs R_MIPS_PC21_S2, R_MIPS_PC26_S2
R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elf64-mips.c: Define REL, and RELA relocations R_MIPS_PC21_S2,
R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16
and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elfn32-mips.c: Likewise.
* elfxx-mips.c (MIPSR6_P): New define.
(mipsr6_exec_plt_entry): New array.
(hi16_reloc_p): Add support for R_MIPS_PCHI16.
(lo16_reloc_p): Add support for R_MIPS_PCLO16.
(aligned_pcrel_reloc_p): New function.
(mips_elf_relocation_needs_la25_stub): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(mips_elf_calculate_relocation): Add support for relocs:
R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2,
R_MIPS_PCHI16 and R_MIPS_PCLO16.
(_bfd_elf_mips_mach): Add support for mips32r6 and mips64r6.
(mips_elf_add_lo16_rel_addend): Add support for R_MIPS_PCHI16.
(_bfd_mips_elf_check_relocs): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(_bfd_mips_elf_relocate_section): Add a check for unaligned
pc relative relocs.
(_bfd_mips_elf_finish_dynamic_symbol): Add support for MIPS r6
plt entry.
(mips_set_isa_flags): Add support for mips32r6 and mips64r6.
(_bfd_mips_elf_print_private_bfd_data): Likewise.
(mips_32bit_flags_p): Add support for mips32r6.
* libbfd.h (bfd_reloc_code_real_names): Add entries for
BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2,
BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2.
* reloc.c: Document relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
binutils/
* readelf.c (get_machine_flags): Add support for mips32r6 and
mips64r6.
elfcpp/
* mips.h (E_MIPS_ARCH_32R6, E_MIPS_ARCH_64R6): New enum constants.
gas/
* config/tc-mips.c (mips_nan2008): New static global.
(mips_flag_nan2008): Removed.
(LL_SC_FMT): New define.
(COP12_FMT): Updated.
(ISA_IS_R6): New define.
(ISA_HAS_64BIT_REGS): Add mips64r6.
(ISA_HAS_DROR): Likewise.
(ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6.
(ISA_HAS_ROR): Likewise.
(ISA_HAS_ODD_SINGLE_FPR): Likewise.
(ISA_HAS_MXHC1): Likewise.
(hilo_interlocks): Likewise.
(md_longopts): Likewise.
(ISA_HAS_LEGACY_NAN): New define.
(options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6.
(mips_ase): Add field rem_rev.
(mips_ases): Updated to add which ISA an ASE was removed in.
(mips_isa_rev): Add support for mips32r6 and mips64r6.
(mips_check_isa_supports_ase): Add support to check if an ASE
has been removed in the specified MIPS ISA revision.
(validate_mips_insn): Skip '-' character.
(macro_build): Likewise.
(mips_check_options): Prevent R6 working with fp32, mips16,
micromips, or branch relaxation.
(file_mips_check_options): Set R6 floating point registers to
64 bit. Also deal with the nan2008 option.
(limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(match_check_prev_operand): New static function.
(match_same_rs_rt_operand): New static function.
(match_non_zero_reg_operand): New static function.
(match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(insns_between): Added case to deal with forbidden slots.
(append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2
and BFD_RELOC_MIPS_26_PCREL_S2.
(match_insn): Add support for operands -A, -B, +' and +". Also
skip '-' character.
(mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo.
(md_parse_option): Add support for mips32r6 and mips64r6. Also
update the nan option handling.
(md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2.
(mips_force_relocation): Prevent forced relaxation for MIPS r6.
(md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(s_mipsset): Add support for mips32r6 and mips64r6.
(s_nan): Update to support the new nan2008 framework.
(tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(mips_elf_final_processing): Updated to use the mips_nan2008.
(mips_cpu_info_table): Add entries for mips32r6 and mips64r6.
(macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref
macros for R6.
(mips_fix_adjustable): Make PC relative R6 relocations relative
to the symbol and not the section.
* configure.ac: Add support for mips32r6 and mips64r6.
* configure: Regenerate.
* doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line
options.
* doc/as.texinfo: Likewise.
gas/testsuite/
* gas/mips/24k-triple-stores-1.s: If testing for r6 prevent
non-supported instructions from being tested.
* gas/mips/24k-triple-stores-2.s: Likewise.
* gas/mips/24k-triple-stores-3.s: Likewise.
* gas/mips/24k-triple-stores-6.s: Likewise.
* gas/mips/beq.s: Likewise.
* gas/mips/eva.s: Likewise.
* gas/mips/ld-zero-3.s: Likewise.
* gas/mips/mips32-cp2.s: Likewise.
* gas/mips/mips32.s: Likewise.
* gas/mips/mips4.s: Likewise.
* gas/mips/add.s: Don't test the add instructions if r6, and
add padding.
* gas/mips/add.d: Check for a triple dot not a nop at the end of the
disassembly output.
* gas/mips/micromips@add.d: Likewise.
* gas/mips/mipsr6@24k-branch-delay-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2-llsc.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2.d: New file.
* gas/mips/mipsr6@24k-triple-stores-3.d: New file.
* gas/mips/mipsr6@24k-triple-stores-6.d: New file.
* gas/mips/mipsr6@add.d: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.s: New file.
* gas/mips/mipsr6@beq.d: New file.
* gas/mips/mipsr6@bge.d: New file.
* gas/mips/mipsr6@bgeu.d: New file.
* gas/mips/mipsr6@blt.d: New file.
* gas/mips/mipsr6@bltu.d: New file.
* gas/mips/mipsr6@branch-misc-1.d: New file.
* gas/mips/mipsr6@branch-misc-2-64.d: New file.
* gas/mips/mipsr6@branch-misc-2pic-64.d: New file.
* gas/mips/mipsr6@branch-misc-4-64.d: New file.
* gas/mips/mipsr6@cache.d: New file.
* gas/mips/mipsr6@eva.d: New file.
* gas/mips/mipsr6@jal-svr4pic-noreorder.d: New file.
* gas/mips/mipsr6@jal-svr4pic.d: New file.
* gas/mips/mipsr6@ld-zero-2.d: New file.
* gas/mips/mipsr6@ld-zero-3.d: New file.
* gas/mips/mipsr6@loc-swap-dis.d: New file.
* gas/mips/mipsr6@mips32-cp2.d: New file.
* gas/mips/mipsr6@mips32-imm.d: New file.
* gas/mips/mipsr6@mips32.d: New file.
* gas/mips/mipsr6@mips32r2.d: New file.
* gas/mips/mipsr6@mips4-fp.d: New file.
* gas/mips/mipsr6@mips4-fp.l: New file.
* gas/mips/mipsr6@mips4-fp.s: New file.
* gas/mips/mipsr6@mips4.d: New file.
* gas/mips/mipsr6@mips5-fp.d: New file.
* gas/mips/mipsr6@mips5-fp.l: New file.
* gas/mips/mipsr6@mips5-fp.s: New file.
* gas/mips/mipsr6@mips64.d: New file.
* gas/mips/mipsr6@msa-branch.d: New file.
* gas/mips/mipsr6@msa.d: New file.
* gas/mips/mipsr6@pref.d: New file.
* gas/mips/mipsr6@relax-swap3.d: New file.
* gas/mips/r6-64-n32.d: New file.
* gas/mips/r6-64-n64.d: New file.
* gas/mips/r6-64-removed.l: New file.
* gas/mips/r6-64-removed.s: New file.
* gas/mips/r6-64.s: New file.
* gas/mips/r6-attr-none-double.d: New file.
* gas/mips/r6-n32.d: New file.
* gas/mips/r6-n64.d: New file.
* gas/mips/r6-removed.l: New file.
* gas/mips/r6-removed.s: New file.
* gas/mips/r6.d: New file.
* gas/mips/r6.s: New file.
* gas/mips/mipsr6@mips32-dsp.d: New file.
* gas/mips/mipsr6@mips32-dspr2.d: New file.
* gas/mips/mipsr6@mips32r2-ill.l: New file.
* gas/mips/mipsr6@mips32r2-ill.s: New file.
* gas/mips/cache.s: Add r6 instruction varients.
* gas/mips/mips.exp: Add support for the mips32r6 and mips64r6
architectures. Also prevent non r6 supported tests from running.
Finally, add in support for running the new r6 tests.
(run_dump_test_arch): Add support for mipsr6 tests.
(run_list_test_arch): Add support for using files of the
form arch@testname.l .
include/elf/
* mips.h: Add relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3,
R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(E_MIPS_ARCH_32R6): New define.
(E_MIPS_ARCH_64R6): New define.
include/opcode/
* mips.h (mips_operand_type): Add new entries: OP_SAME_RS_RT,
OP_CHECK_PREV and OP_NON_ZERO_REG. Add descriptions for the MIPS R6
instruction arguments: -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B,
+I, +O, +R, +:, +\, +", +;
(mips_check_prev_operand): New struct.
(INSN2_FORBIDDEN_SLOT): New define.
(INSN_ISA32R6): New define.
(INSN_ISA64R6): New define.
(INSN_UPTO32R6): New define.
(INSN_UPTO64R6): New define.
(mips_isa_table): Add INSN_UPTO32R6 and INSN_UPTO64R6.
(ISA_MIPS32R6): New define.
(ISA_MIPS64R6): New define.
(CPU_MIPS32R6): New define.
(CPU_MIPS64R6): New define.
(cpu_is_member): Add cases for CPU_MIPS32R6, and CPU_MIPS64R6.
ld/
* ldmain.c (get_emulation): Add support for -mips32r6 and -mips64r6.
opcodes/
* mips-dis.c (mips_arch_choices): Add entries for mips32r6 and
mips64r6.
(parse_mips_dis_option): Allow MSA and virtualization support for
mips64r6.
(mips_print_arg_state): Add fields dest_regno and seen_dest.
(mips_seen_register): New function.
(print_insn_arg): Refactored code to use mips_seen_register
function. Add support for OP_SAME_RS_RT, OP_CHECK_PREV and
OP_NON_ZERO_REG. Changed OP_REPEAT_DEST_REG case to print out
the register rather than aborting.
(print_insn_args): Add length argument. Add code to correctly
calculate the instruction address for pc relative instructions.
(validate_insn_args): New static function.
(print_insn_mips): Prevent jalx disassembling for r6. Use
validate_insn_args.
(print_insn_micromips): Use validate_insn_args.
all the arguments are valid.
* mips-formats.h (PREV_CHECK): New define.
* mips-opc.c (decode_mips_operand): Add support for -a, -b, -d, -s,
-t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +;
(RD_pc): New define.
(FS): New define.
(I37): New define.
(I69): New define.
(mips_builtin_opcodes): Add MIPS R6 instructions. Exclude recoded
MIPS R6 instructions from MIPS R2 instructions.
|
|
This patch firstly adds support for mips32r3 mips32r5, mips64r3
and mips64r5. Secondly it adds support for the eretnc instruction.
ChangeLog:
bfd/
* aoutx.h (NAME (aout, machine_type)): Add mips32r3, mips64r3,
mips32r5 and mips64r5.
* archures.c (bfd_architecture): Likewise.
* bfd-in2.h (bfd_architecture): Likewise.
* cpu-mips.c (arch_info_struct): Likewise.
* elfxx-mips.c (mips_set_isa_flags): Likewise.
gas/
* tc-mips.c (ISA_SUPPORTS_MIPS16E): Add mips32r3, mips32r5, mips64r3
and mips64r5.
(ISA_HAS_64BIT_FPRS): Likewise.
(ISA_HAS_ROR): Likewise.
(ISA_HAS_ODD_SINGLE_FPR): Likewise.
(ISA_HAS_MXHC1): Likewise.
(hilo_interlocks): Likewise.
(md_longopts): Likewise.
(ISA_HAS_64BIT_REGS): Add mips64r3 and mips64r5.
(ISA_HAS_DROR): Likewise.
(options): Add OPTION_MIPS32R3, OPTION_MIPS32R5, OPTION_MIPS64R3, and
OPTION_MIPS64R5.
(mips_isa_rev): Add support for mips32r3, mips32r5, mips64r3 and
mips64r5.
(md_parse_option): Likewise.
(s_mipsset): Likewise.
(mips_cpu_info_table): Add entries for mips32r3, mips32r5, mips64r3
and mips64r5. Also change p5600 entry to be mips32r5.
* configure.in: Add support for mips32r3, mips32r5, mips64r3 and
mips64r5.
* configure: Regenerate.
* doc/c-mips.texi: Document the -mips32r3, -mips32r5, -mips64r3 and
-mips64r5 command line options.
* doc/as.texinfo: Likewise.
gas/testsuite/
* gas/mips/mips.exp: Add MIPS32r5 tests. Also add the mips32r3,
mips32r5, mips64r3 and mips64r5 isas to the testsuite.
* gas/mips/r5.s: New test.
* gas/mips/r5.d: Likewise.
include/opcode/
* mips.h (INSN_ISA_MASK): Updated.
(INSN_ISA32R3): New define.
(INSN_ISA32R5): New define.
(INSN_ISA64R3): New define.
(INSN_ISA64R5): New define.
(INSN_ISA64, INSN_ISA64R2, INSN_ISA3_32, INSN_ISA3_32R2, INSN_ISA4_32
INSN_ISA4_32R2, INSN_ISA5_32R2): Renumbered.
(mips_isa_table): Add entries for mips32r3, mips32r5, mips64r3 and
mips64r5.
(INSN_UPTO32R3): New define.
(INSN_UPTO32R5): New define.
(INSN_UPTO64R3): New define.
(INSN_UPTO64R5): New define.
(ISA_MIPS32R3): New define.
(ISA_MIPS32R5): New define.
(ISA_MIPS64R3): New define.
(ISA_MIPS64R5): New define.
(CPU_MIPS32R3): New define.
(CPU_MIPS32R5): New define.
(CPU_MIPS64R3): New define.
(CPU_MIPS64R5): New define.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Add MIPS32r5 eretnc instruction.
(I34): New define.
(I36): New define.
(I66): New define.
(I68): New define.
* mips-dis.c (mips_arch_choices): Add mips32r3, mips32r5, mips64r3 and
mips64r5.
(parse_mips_dis_option): Update MSA and virtualization support to
allow mips64r3 and mips64r5.
|
|
ChangeLog:
binutils/
* doc/binutils.texi: Document the disassemble MIPS XPA instructions
command line option.
gas/
* config/tc-mips.c (options): Add OPTION_XPA and OPTION_NO_XPA.
(md_longopts): Add xpa and no-xpa command line options.
(mips_ases): Add MIPS XPA ASE.
(mips_cpu_info_table): Update p5600 entry to allow the XPA ASE.
* doc/as.texinfo: Document the MIPS XPA command line options.
* doc/c-mips.texi: Document the MIPS XPA command line options,
and assembler directives.
gas/testsuite/
* gas/mips/mips.exp: Add xpa tests.
* gas/mips/xpa.s: New test.
* gas/mips/xpa.d: Likewise.
include/
* opcode/mips.h (ASE_XPA): New define.
opcodes/
* mips-dis.c (mips_arch_choices): Update mips32r2 and mips64r2
to allow the MIPS XPA ASE.
(parse_mips_dis_option): Process the -Mxpa option.
* mips-opc.c (XPA): New define.
(mips_builtin_opcodes): Add MIPS XPA instructions and move the
locations of the ctc0 and cfc0 instructions.
|
|
|
|
2014-02-04 Heiher <r@hev.cc>
* elfxx-mips.c (mips_set_isa_flags): Use E_MIPS_ARCH_64R2 for
Loongson-3A.
(mips_mach_extensions): Make bfd_mach_mips_loongson_3a an
extension of bfd_mach_mipsisa64r2.
opcodes/
2014-02-04 Heiher <r@hev.cc>
* mips-dis.c (mips_arch_choices): Usee ISA_MIPS64R2 for Loongson-3A.
gas/
2014-02-04 Heiher <r@hev.cc>
* config/tc-mips.c (mips_cpu_info_table): Use ISA_MIPS64R2 for
Loongson-3A.
|
|
2013-12-16 Andrew Bennett <andrew.bennett@imgtec.com>
gas/testsuite/gas/mips/
* mips.exp: Add CP1 register name tests.
* cp1-names-mips32.d: New test.
* cp1-names-mips32r2.d: New test.
* cp1-names-mips64.d: New test.
* cp1-names-mips64r2.d: New test.
* cp1-names-numeric.d: New test.
* cp1-names-r3000.d: New test.
* cp1-names-r4000.d: New test.
* cp1-names-sb1.d: New test.
* cp1-names.s: New test.
* micromips-insn32.d: Add the correct symbolic names for the CP1
registers.
* micromips-noinsn32.d: Likewise.
* micromips-trap.d: Likewise.
* micromips.d: Likewise.
opcodes/
* mips-dis.c: Add mips_cp1_names pointer.
(mips_cp1_names_numeric): New array.
(mips_cp1_names_mips3264): New array.
(mips_arch_choice): Add cp1_names.
(mips_arch_choices): Add relevant cp1 register name array to each of
the elements.
(set_default_mips_dis_options): Add support for setting up the
mips_cp1_names pointer.
(parse_mips_dis_option): Add support for the cp1-names command line
variable. Also setup the mips_cp1_names pointer.
(print_reg): Print out name of the cp1 register.
|
|
gas/
* config/mips/tc-mips.c (convert_reg_type): Use
INSN_LOAD_MEMORY instead of INSN_LOAD_MEMORY_DELAY.
(reg_needs_delay): Likewise.
(insns_between): Likewise.
include/
* opcode/mips.h (INSN_LOAD_MEMORY_DELAY): Rename to...
(INSN_LOAD_MEMORY): ...this.
opcodes/
* mips-dis.c (print_insn_mips): Use
INSN_LOAD_MEMORY instead of INSN_LOAD_MEMORY_DELAY.
(print_insn_micromips): Likewise.
* mips-opc.c (LDD): Remove.
(CLD): Include INSN_LOAD_MEMORY.
(LM): New.
(mips_builtin_opcodes): Use LM instead of LDD.
Add LM to load instructions.
|
|
* micromips-opc.c (decode_micromips_operand): Add +T, +U, +V, +W,
+d, +e, +h, +k, +l, +n, +o, +u, +v, +w, +x,
+~, +!, +@, +#, +$, +%, +^, +&, +*, +|.
(MSA): New define.
(MSA64): New define.
(micromips_opcodes): Add MSA instructions.
* mips-dis.c (msa_control_names): New array.
(mips_abi_choice): Add ASE_MSA to mips32r2.
Remove ASE_MDMX from mips64r2.
Add ASE_MSA and ASE_MSA64 to mips64r2.
(parse_mips_dis_option): Handle -Mmsa.
(print_reg): Handle cases for OP_REG_MSA and OP_REG_MSA_CTRL.
(print_insn_arg): Handle cases for OP_IMM_INDEX and OP_REG_INDEX.
(print_mips_disassembler_options): Print -Mmsa.
* mips-opc.c (decode_mips_operand): Add +T, +U, +V, +W, +d, +e, +h, +k,
+l, +n, +o, +u, +v, +w, +~, +!, +@, +#, +$, +%, +^, +&, +*, +|.
(MSA): New define.
(MSA64): New define.
(mips_builtin_op): Add MSA instructions.
|
|
* mips.h (OP_OPTIONAL_REG): New mips_operand_type.
(mips_optional_operand_p): New function.
opcodes/
* mips-formats.h (OPTIONAL_REG, OPTIONAL_MAPPED_REG): New macros.
* micromips-opc.c (decode_micromips_operand): Use OPTIONAL_REG
and OPTIONAL_MAPPED_REG.
* mips-opc.c (decode_mips_operand): Likewise.
* mips16-opc.c (decode_mips16_operand): Likewise.
* mips-dis.c (print_insn_arg): Handle OP_OPTIONAL_REG.
gas/
* config/tc-mips.c (operand_reg_mask, match_operand): Handle
OP_OPTIONAL_REG.
(mips_ip, mips16_ip): Use mips_optional_operand_p to check
for optional operands.
|
|
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* mips.h: Document new VU0 operand characters.
(OP_VU0_SUFFIX, OP_VU0_MATCH_SUFFIX): New mips_operand_types.
(OP_REG_VF, OP_REG_VI, OP_REG_R5900_I, OP_REG_R5900_Q, OP_REG_R5900_R)
(OP_REG_R5900_ACC): New mips_reg_operand_types.
(INSN2_VU0_CHANNEL_SUFFIX): New macro.
(mips_vu0_channel_mask): Declare.
opcodes/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* mips-dis.c (print_reg): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I,
OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC.
(print_vu0_channel): New function.
(print_insn_arg): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(print_insn_args): Handle '#'.
(print_insn_mips): Handle INSN2_VU0_CHANNEL_SUFFIX.
* mips-opc.c (mips_vu0_channel_mask): New constant.
(decode_mips_operand): Handle new VU0 operand types.
(VU0, VU0CH): New macros.
(mips_builtin_opcodes): Add VU0 opcodes. Use "+7" rather than "E"
for LQC2 and SQC2. Use "+9" rather than "G" for EE CFC2 and CTC2.
Use "+6" rather than "G" for QMFC2 and QMTC2.
gas/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* config/tc-mips.c (MAX_OPERANDS): Bump to 6.
(RWARN): Bump to 0x8000000.
(RTYPE_VI, RTYPE_VF, RTYPE_R5900_I, RTYPE_R5900_Q, RTYPE_R5900_R)
(RTYPE_R5900_ACC): New register types.
(RTYPE_MASK): Include them.
(R5900_I_NAMES, R5900_Q_NAMES, R5900_R_NAMES, R5900_ACC_NAMES): New
macros.
(reg_names): Include them.
(mips_parse_register_1): New function, split out from...
(mips_parse_register): ...here. Add a channels_ptr parameter.
Look for VU0 channel suffixes when nonnull.
(reg_lookup): Update the call to mips_parse_register.
(mips_parse_vu0_channels): New function.
(OT_CHANNELS, OT_DOUBLE_CHAR): New mips_operand_token_types.
(mips_operand_token): Add a "channels" field to the union.
Extend the comment above "ch" to OT_DOUBLE_CHAR.
(mips_parse_base_start): Match -- and ++. Handle channel suffixes.
(mips_parse_argument_token): Handle channel suffixes here too.
(validate_mips_insn): Handle INSN2_VU0_CHANNEL_SUFFIX.
Ignore OP_VU0_MATCH_SUFFIX when calculating the used bits.
Handle '#' formats.
(md_begin): Register $vfN and $vfI registers.
(operand_reg_mask): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(convert_reg_type): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I,
OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC.
(match_vu0_suffix_operand): New function.
(match_operand): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(macro): Use "+7" rather than "E" for LDQ2 and STQ2.
(mips_lookup_insn): New function.
(mips_ip): Use it. Allow "+K" operands to be elided at the end
of an instruction. Handle '#' sequences.
gas/testsuite/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
* gas/mips/r5900-vu0.d: Expect $vfN and $viN instead of numeric
coprocessor registers.
* gas/mips/r5900-all-vu0.s, gas/mips/r5900-all-vu0.d,
gas/mips/r5900-full-vu0.s, gas/mips/r5900-full-vu0.d,
gas/mips/r5900-error-vu0.s, gas/mips/r5900-error-vu0.l: New tests.
* gas/mips/mips.exp: Run them.
|
|
* mips.h (mips_decode_reg_operand): New function.
(INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL)
(INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4)
(INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI):
New macros.
(INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D)
(INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T)
(INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S)
(INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z)
(INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D)
(INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD)
(INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG)
(INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP)
(INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP)
(INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other
macros to cover the gaps.
(INSN2_MOD_SP): Replace with...
(INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros.
(MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z)
(MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y)
(MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z)
(MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X):
Delete.
opcodes/
* mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI):
New macros.
(WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R)
(WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete.
(mips_builtin_opcodes): Use the new position-based read-write flags
instead of field-based ones. Use UDI for "udi..." instructions.
* mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2):
New macros.
(WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete.
(RD_T, WR_T, WR_31): Redefine using generic INSN_* flags.
(WR_SP, RD_16): New macros.
(RD_SP): Redefine as an INSN2_* flag.
(MOD_SP): Redefine in terms of RD_SP and WR_SP.
(mips16_opcodes): Use the new position-based read-write flags
instead of field-based ones. Use RD_16 for "nop". Move RD_SP to
pinfo2 field.
* micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2):
New macros.
(WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj)
(WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D)
(WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete.
(RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP.
(micromips_opcodes): Use the new position-based read-write flags
instead of field-based ones.
* mips-dis.c (print_insn_arg): Use mips_decode_reg_operand.
(print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead
of field-based flags.
gas/
* config/tc-mips.c (MAX_OPERANDS): New macro.
(mips_operand_array): New structure.
(mips_operands, mips16_operands, micromips_operands): New arrays.
(micromips_to_32_reg_b_map, micromips_to_32_reg_c_map)
(micromips_to_32_reg_e_map, micromips_to_32_reg_f_map)
(micromips_to_32_reg_g_map, micromips_to_32_reg_l_map)
(micromips_to_32_reg_q_map): Delete.
(insn_operands, insn_opno, insn_extract_operand): New functions.
(validate_mips_insn): Take a mips_operand_array as argument and
use it to build up a list of operands. Extend to handle INSN_MACRO
and MIPS16.
(validate_mips16_insn): New function.
(validate_micromips_insn): Take a mips_operand_array as argument.
Handle INSN_MACRO.
(md_begin): Initialize mips_operands, mips16_operands and
micromips_operands. Call validate_mips_insn and
validate_micromips_insn for macro instructions too.
Call validate_mips16_insn for MIPS16 instructions.
(insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask):
New functions.
(gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use
them. Handle INSN_UDI.
(get_append_method): Use gpr_read_mask.
|
|
* mips.h (MIPS16_INSN_WRITE_SP, MIPS16_INSN_READ_31)
(MIPS16_INSN_READ_PC, MIPS16_INSN_UNCOND_BRANCH)
(MIPS16_INSN_COND_BRANCH): Delete.
opcodes/
* mips16-opc.c (UBR, CBR, RD_31, RD_PC): Redefine as INSN2_* flags.
(WR_SP): Replace with...
(MOD_SP): ...this.
(mips16_opcodes): Update accordingly.
* mips-dis.c (print_insn_mips16): Likewise.
gas/
* config/tc-mips.c (compact_branch_p, uncond_branch_p): Use the same
flags for MIPS16 and non-MIPS16 instructions.
(gpr_mod_mask): Move the INSN2_MOD_SP case outside the micromips block.
(gpr_read_mask): Use INSN2_READ_GPR_31 for MIPS16 instructions too.
(gpr_write_mask): Remove MIPS16_INSN_WRITE_SP handling.
(can_swap_branch_p, get_append_method): Use the same flags for MIPS16
and non-MIPS16 instructions. Fix formatting.
|
|
* mips-dis.c (print_mips16_insn_arg): Include ISA bit in base address.
|
|
* mips.h (mips_operand_type): Add OP_ENTRY_EXIT_LIST and
OP_SAVE_RESTORE_LIST.
(decode_mips16_operand): Declare.
opcodes/
* mips16-opc.c: Include mips-formats.h.
(reg_0_map, reg_29_map, reg_31_map, reg_m16_map, reg32r_map): New
static arrays.
(decode_mips16_operand): New function.
* mips-dis.c (mips16_to_32_reg_map, mips16_reg_names): Delete.
(print_insn_arg): Handle OP_ENTRY_EXIT list.
Abort for OP_SAVE_RESTORE_LIST.
(print_mips16_insn_arg): Change interface. Use mips_operand
structures. Delete GET_OP_S. Move GET_OP definition to...
(print_insn_mips16): ...here. Call init_print_arg_state.
Update the call to print_mips16_insn_arg.
|
|
* mips.h (mips_operand_type, mips_reg_operand_type): New enums.
(mips_operand, mips_int_operand, mips_mapped_int_operand)
(mips_msb_operand, mips_reg_operand, mips_reg_pair_operand)
(mips_pcrel_operand): New structures.
(mips_insert_operand, mips_extract_operand, mips_signed_operand)
(mips_decode_int_operand, mips_decode_pcrel_operand): New functions.
(decode_mips_operand, decode_micromips_operand): Declare.
opcodes/
* mips-formats.h: New file.
* mips-opc.c: Include mips-formats.h.
(reg_0_map): New static array.
(decode_mips_operand): New function.
* micromips-opc.c: Remove <stdio.h> include. Include mips-formats.h.
(reg_0_map, reg_28_map, reg_29_map, reg_31_map, reg_m16_map)
(reg_mn_map, reg_q_map, reg_h_map1, reg_h_map2, int_b_map)
(int_c_map): New static arrays.
(decode_micromips_operand): New function.
* mips-dis.c (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map)
(micromips_to_32_reg_d_map, micromips_to_32_reg_e_map)
(micromips_to_32_reg_f_map, micromips_to_32_reg_g_map)
(micromips_to_32_reg_h_map1, micromips_to_32_reg_h_map2)
(micromips_to_32_reg_l_map, micromips_to_32_reg_m_map)
(micromips_to_32_reg_n_map, micromips_to_32_reg_q_map)
(micromips_imm_b_map, micromips_imm_c_map): Delete.
(print_reg): New function.
(mips_print_arg_state): New structure.
(init_print_arg_state, print_insn_arg): New functions.
(print_insn_args): Change interface and use mips_operand structures.
Delete GET_OP_S. Move GET_OP definition to...
(print_insn_mips): ...here. Update the call to print_insn_args.
(print_insn_micromips): Use print_insn_args.
gas/
* config/tc-mips.c (validate_mips_insn): Move further up file.
Add insn_bits and decode_operand arguments. Use the mips_operand
fields to work out which bits an operand occupies. Detect double
definitions.
(validate_micromips_insn): Move further up file. Call into
validate_mips_insn.
|
|
* mips.h: Remove documentation of "[" and "]". Update documentation
of "k" and the MDMX formats.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Use "Q" for the INSN_5400
MDMX-like instructions.
* mips-dis.c (print_insn_arg): Use "$f" rather than "$v" when
printing "Q" operands for INSN_5400 instructions.
gas/
* config/tc-mips.c (validate_mips_insn): Remove "[" and "]" handling.
(mips_ip): Likewise. Do not set is_mdmx for INSN_5400 instructions.
Check constraints on the VR5400 RZU.OB, SLL.OB and SRL.OB instructions.
gas/testsuite/
* gas/mips/vr5400-ill.s, gas/mips/vr5400-ill.l: New test.
* gas/mips/mips.exp: Run it.
|
|
* mips.h: Update documentation of "+s" and "+S".
opcodes/
* mips-opc.c (mips_builtin_opcodes): Use "+s" for "cins32" and
"+S" for "cins".
* mips-dis.c (print_mips_arg): Update "+s" and "+S" comments.
Combine cases.
gas/
* config/tc-mips.c (mips_ip): Preserve the real bit number for "+p".
Require the msb to be <= 31 for "+s". Check that the size is <= 31
for both "+s" and "+S".
|
|
* mips.h: Document "+i".
opcodes/
* mips-opc.c (mips_builtin_opcodes): Use "+i" rather than "a" for
"jalx".
* mips16-opc.c (mips16_opcodes): Likewise.
* micromips-opc.c (micromips_opcodes): Likewise.
* mips-dis.c (print_insn_args, print_mips16_insn_arg)
(print_insn_mips16): Handle "+i".
(print_insn_micromips): Likewise. Conditionally preserve the
ISA bit for "a" but not for "+i".
gas/
* config/tc-mips.c (validate_mips_insn, validate_micromips_insn):
(mips_ip, mips16_ip): Handle "+i".
|
|
* mips.h: Remove "mi" documentation. Update "mh" documentation.
(OP_MASK_MI, OP_SH_MI, MICROMIPSOP_MASK_MI, MICROMIPSOP_MASK_MI):
Delete.
(INSN2_WRITE_GPR_MHI): Rename to...
(INSN2_WRITE_GPR_MH): ...this.
opcodes/
* micromips-opc.c (WR_mhi): Rename to..
(WR_mh): ...this.
(micromips_opcodes): Update "movep" entry accordingly. Replace
"mh,mi" with "mh".
* mips-dis.c (micromips_to_32_reg_h_map): Rename to...
(micromips_to_32_reg_h_map1): ...this.
(micromips_to_32_reg_i_map): Rename to...
(micromips_to_32_reg_h_map2): ...this.
(print_micromips_insn): Remove "mi" case. Print both registers
in the pair for "mh".
gas/
* config/tc-mips.c (mips32_to_micromips_reg_h_map): Delete.
(micromips_to_32_reg_h_map): Rename to...
(micromips_to_32_reg_h_map1): ...this.
(micromips_to_32_reg_i_map): Rename to...
(micromips_to_32_reg_h_map2): ...this.
(mips_lookup_reg_pair): New function.
(gpr_write_mask, macro): Adjust after above renaming.
(validate_micromips_insn): Remove "mi" handling.
(mips_ip): Likewise. Parse both registers in a pair for "mh".
|
|
* mips.h: Remove documentation of "+D" and "+T".
opcodes/
* mips-opc.c (mips_builtin_opcodes): Remove "+D" and "+T" entries.
* micromips-opc.c (micromips_opcodes): Likewise.
* mips-dis.c (print_insn_args, print_insn_micromips): Remove "+D"
and "+T" handling. Check for a "0" suffix when deciding whether to
use coprocessor 0 names. In that case, also check for ",H" selectors.
gas/
* config/tc-mips.c (validate_mips_insn, validate_micromips_insn)
(mips_ip): Remove "+D" and "+T" handling.
gas/testsuite/
* gas/mips/lb.d, gas/mips/sb.d: Use coprocessor register names
for LWC0 and SWC0.
|
|
* elfxx-mips.h (_bfd_mips_elf_get_synthetic_symtab): New
prototype.
* elf32-mips.c (elf_backend_plt_sym_val): Remove macro.
(bfd_elf32_get_synthetic_symtab): New macro.
* elfxx-mips.c (plt_entry): New structure.
(mips_elf_link_hash_entry): Add use_plt_entry member.
(mips_elf_link_hash_table): Rename plt_entry_size member to
plt_mips_entry_size. Add plt_comp_entry_size, plt_mips_offset,
plt_comp_offset, plt_got_index entries and plt_header_is_comp
members.
(STUB_LW_MICROMIPS, STUB_MOVE_MICROMIPS): New macros.
(STUB_LUI_MICROMIPS, STUB_JALR_MICROMIPS): Likewise.
(STUB_ORI_MICROMIPS, STUB_LI16U_MICROMIPS): Likewise.
(STUB_LI16S_MICROMIPS): Likewise.
(MICROMIPS_FUNCTION_STUB_NORMAL_SIZE): Likewise.
(MICROMIPS_FUNCTION_STUB_BIG_SIZE): Likewise.
(micromips_o32_exec_plt0_entry): New variable.
(mips16_o32_exec_plt_entry): Likewise.
(micromips_o32_exec_plt_entry): Likewise.
(mips_elf_link_hash_newfunc): Initialize use_plt_entry.
(mips_elf_output_extsym): Update to use gotplt_union's plist
member rather than offset.
(mips_elf_gotplt_index): Likewise. Remove the VxWorks
restriction. Use MIPS_ELF_GOT_SIZE to calculate GOT address.
(mips_elf_count_got_symbols): Update to use gotplt_union's plist
member rather than offset.
(mips_elf_calculate_relocation): Handle MIPS16/microMIPS PLT
entries.
(_bfd_mips_elf_create_dynamic_sections): Don't set PLT sizes
here.
(mips_elf_make_plt_record): New function.
(_bfd_mips_elf_check_relocs): Update comment. Record occurences
of JAL relocations that might need a PLT entry.
(_bfd_mips_elf_adjust_dynamic_symbol): Update to use
gotplt_union's plist member rather than offset. Set individual
PLT entry sizes here. Handle MIPS16/microMIPS PLT entries.
Don't set the symbol's value in the symbol table for PLT
references here. Don't set the PLT or PLT GOT section sizes
here.
(mips_elf_estimate_stub_size): Handle microMIPS stubs.
(mips_elf_allocate_lazy_stub): Likewise.
(mips_elf_lay_out_lazy_stubs): Likewise. Define a _MIPS_STUBS_
magic symbol.
(mips_elf_set_plt_sym_value): New function.
(_bfd_mips_elf_size_dynamic_sections): Set PLT header size and
PLT and PLT GOT section sizes here. Set the symbol values in
the symbol table for PLT references here. Handle microMIPS
annotation of the _PROCEDURE_LINKAGE_TABLE_ magic symbol.
(_bfd_mips_elf_finish_dynamic_symbol): Update to use
gotplt_union's plist member rather than offset. Handle
MIPS16/microMIPS PLT entries. Handle microMIPS stubs.
(_bfd_mips_vxworks_finish_dynamic_symbol): Update to use
gotplt_union's plist member rather than offset. Use
MIPS_ELF_GOT_SIZE to calculate GOT address.
(mips_finish_exec_plt): Handle microMIPS PLT. Return status.
(_bfd_mips_elf_finish_dynamic_sections): Handle result from
mips_finish_exec_plt.
(_bfd_mips_elf_link_hash_table_create): Update to use
gotplt_union's plist member rather than offset.
(_bfd_mips_elf_get_synthetic_symtab): New function.
include/elf/
* mips.h (ELF_ST_IS_MIPS_PLT): Respect STO_MIPS16 setting.
(ELF_ST_SET_MIPS_PLT): Likewise.
gdb/
* mips-tdep.c (mips_elf_make_msymbol_special): Handle MIPS16 and
microMIPS synthetic symbols.
ld/
* emulparams/elf32btsmip.sh: Arrange for .got.plt to be placed
as close to .plt as possible.
* scripttempl/elf.sc: Handle $INITIAL_READWRITE_SECTIONS and
$PLT_NEXT_DATA variables.
ld/testsuite/
* ld-mips-elf/jalx-2.dd: Update for microMIPS PLT support.
* ld-mips-elf/pic-and-nonpic-3a.dd: Update for the _MIPS_STUBS_
magic symbol.
* ld-mips-elf/pic-and-nonpic-3b.dd: Likewise.
* ld-mips-elf/pic-and-nonpic-6-n32.dd: Likewise.
* ld-mips-elf/pic-and-nonpic-6-n64.dd: Likewise.
* ld-mips-elf/pic-and-nonpic-6-o32.dd: Likewise.
* ld-mips-elf/stub-dynsym-1-10000.d: Likewise.
* ld-mips-elf/stub-dynsym-1-2fe80.d: Likewise.
* ld-mips-elf/stub-dynsym-1-7fff.d: Likewise.
* ld-mips-elf/stub-dynsym-1-8000.d: Likewise.
* ld-mips-elf/stub-dynsym-1-fff0.d: Likewise.
* ld-mips-elf/tlslib-o32.d: Likewise.
opcodes/
* mips-dis.c (is_mips16_plt_tail): New function.
(print_insn_mips16): Handle MIPS16 PLT entry's GOT slot address
word.
(is_compressed_mode_p): Handle MIPS16/microMIPS PLT entries.
|
|
Maciej W. Rozycki <macro@codesourcery.com>
Chao-Ying Fu <fu@mips.com>
gas/testsuite/
* gas/mips/mips.exp: Run new tests.
* gas/mips/eva.d: New.
* gas/mips/eva.s: New.
* gas/mips/micromips@eva.d: New.
gas/
* config/tc-mips.c (mips_set_options): Add ase_eva.
(mips_set_options mips_opts): Add ase_eva.
(file_ase_eva): Declare.
(ISA_SUPPORTS_EVA_ASE): Define.
(IS_SEXT_9BIT_NUM): Define.
(MIPS_CPU_ASE_EVA): Define.
(is_opcode_valid): Add support for ase_eva.
(macro_build): Likewise.
(macro): Likewise.
(validate_mips_insn): Likewise.
(validate_micromips_insn): Likewise.
(mips_ip): Likewise.
(options): Add OPTION_EVA and OPTION_NO_EVA.
(md_longopts): Add -meva and -mno-eva.
(md_parse_option): Process new options.
(mips_after_parse_args): Check for valid EVA combinations.
(s_mipsset): Likewise.
include/
* opcode/mips.h (OP_SH_EVAOFFSET): Define.
(OP_MASK_EVAOFFSET): Define.
(INSN_ASE_MASK): Delete.
(ASE_EVA): Define.
(M_CACHEE_AB, M_CACHEE_OB): New.
(M_LBE_OB, M_LBE_AB): New.
(M_LBUE_OB, M_LBUE_AB): New.
(M_LHE_OB, M_LHE_AB): New.
(M_LHUE_OB, M_LHUE_AB): New.
(M_LLE_AB, M_LLE_OB): New.
(M_LWE_OB, M_LWE_AB): New.
(M_LWLE_AB, M_LWLE_OB): New.
(M_LWRE_AB, M_LWRE_OB): New.
(M_PREFE_AB, M_PREFE_OB): New.
(M_SCE_AB, M_SCE_OB): New.
(M_SBE_OB, M_SBE_AB): New.
(M_SHE_OB, M_SHE_AB): New.
(M_SWE_OB, M_SWE_AB): New.
(M_SWLE_AB, M_SWLE_OB): New.
(M_SWRE_AB, M_SWRE_OB): New.
(MICROMIPSOP_SH_EVAOFFSET): Define.
(MICROMIPSOP_MASK_EVAOFFSET): Define.
opcodes/
* micromips-opc.c (EVA): Define.
(TLBINV): Define.
(micromips_opcodes): Add EVA opcodes.
* mips-dis.c (mips_arch_choices): Update for ASE_EVA.
(print_insn_args): Handle EVA offsets.
(print_insn_micromips): Likewise.
* mips-opc.c (EVA): Define.
(TLBINV): Define.
(mips_builtin_opcodes): Add EVA opcodes.
|
|
* micromips-opc.c (IVIRT): New define.
(IVIRT64): New define.
(micromips_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0,
tlbginv, tlbginvf, tlbgp, tlbgr, tlbgwi, tlbgwr VIRT instructions.
* mips-dis.c (print_insn_micromips): Handle mfgc0, mtgc0, dmfgc0,
dmtgc0 to print cp0 names.
|
|
2013-06-08 Catherine Moore <clm@codesourcery.com>
* config/tc-mips.c (is_opcode_valid): Build ASE mask.
(is_opcode_valid_16): Pass ase value to opcode_is_member.
(append_insn): Change INSN_xxxx to ASE_xxxx.
include/
2013-06-08 Catherine Moore <clm@codesourcery.com>
* opcode/mips.h (mips_opcode): Add ase field.
(INSN_ASE_MASK): Delete.
(INSN_DSP): Rename to ASE_DSP. Provide new value.
(INSN_DSPR2): Rename to ASE_DSPR2. Provide new value.
(INSN_MCU): Rename to ASE_MCU. Provide new value.
(INSN_MDMX): Rename to ASE_MDMX. Provide new value.
(INSN_MIPS3d): Rename to ASE_MIPS3D. Provide new value.
(INSN_MT): Rename to ASE_MT. Provide new value.
(INSN_SMARTMIPS): Rename to ASE_SMARTMIPS. Provide new value.
(INSN_VIRT): Rename to ASE_VIRT. Provide new value.
(INSN_VIRT64): Rename to ASE_VIRT64. Provide new value.
(opcode_is_member): Add ase argument. Check ase.
opcodes/
2013-06-08 Catherine Moore <clm@codesourcery.com>
Richard Sandiford <rdsandiford@googlemail.com>
* micromips-opc.c (D32, D33, MC): Update definitions.
(micromips_opcodes): Initialize ase field.
* mips-dis.c (mips_arch_choice): Add ase field.
(mips_arch_choices): Initialize ase field.
(set_default_mips_dis_options): Declare and setup mips_ase.
* mips-opc.c (M3D, SMT, MX, IVIRT, IVIRT64, D32, D33, D64,
MT32, MC): Update definitions.
(mips_builtin_opcodes): Initialize ase field.
|
|
* doc/binutils.texi: Document -Mvirt disassembler option.
gas/ChangeLog:
* config/tc-mips.c (struct mips_set_options): New ase_virt field.
(mips_opts): Update for the new field.
(file_ase_virt): New variable.
(ISA_SUPPORTS_VIRT_ASE): New macro.
(ISA_SUPPORTS_VIRT64_ASE): New macro.
(MIPS_CPU_ASE_VIRT): New define.
(is_opcode_valid): Handle ase_virt.
(macro_build): Handle "+J".
(validate_mips_insn): Likewise.
(mips_ip): Likewise.
(enum options): Add OPTION_VIRT and OPTION_NO_VIRT.
(md_longopts): Add mvirt and mnovirt
(md_parse_option): Handle OPTION_VIRT and OPTION_NO_VIRT.
(mips_after_parse_args): Handle ase_virt field.
(s_mipsset): Handle "virt" and "novirt".
(mips_elf_final_processing): Add a comment about virt ASE might need a new flag.
(md_show_usage): Print out the usage of -mvirt and mno-virt options.
* doc/c-mips.texi: Document -mvirt and -mno-virt.
Document ".set virt" and ".set novirt".
gas/testsuite/ChangeLog:
* gas/mips/mips.exp: Run virt and virt64 testcases.
* gas/mips/virt.d: New file.
* gas/mips/virt.s: New file.
* gas/mips/virt64.d: New file.
* gas/mips/virt64.s: New file.
include/opcode/ChangeLog:
* mips.h (OP_MASK_CODE10): Correct definition.
(OP_SH_CODE10): Likewise.
Add a comment that "+J" is used now for OP_*CODE10.
(INSN_ASE_MASK): Update.
(INSN_VIRT): New macro.
(INSN_VIRT64): New macro
opcodes/ChangeLog:
* mips-dis.c (mips_arch_choices): Add INSN_VIRT to mips32r2 .
Add INSN_VIRT and INSN_VIRT64 to mips64r2.
(parse_mips_dis_option): Handle the virt option.
(print_insn_args): Handle "+J".
(print_mips_disassembler_options): Print out message about virt64.
* mips-opc.c (IVIRT): New define.
(IVIRT64): New define.
(mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0,
tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp VIRT instructions.
Move rfe to the bottom as it conflicts with tlbgp.
|
|
* opcodes/mips-dis.c (print_insn_args): Modify def of reg.
|
|
* mips-dis.c (is_compressed_mode_p): Only match symbols from the
section disassembled.
binutils/testsuite/
* binutils-all/mips/mixed-micromips.d: New test.
* binutils-all/mips/mixed-mips16.d: New test.
* binutils-all/mips/mixed-micromips.s: New test source.
* binutils-all/mips/mixed-mips16.s: New test source.
* binutils-all/mips/mips.exp: New file.
|
|
* bfd-in2.h: Add support for MIPS r5900
* config.bfd: Add support for Sony Playstation 2
* cpu-mips.c: Add support for MIPS r5900
* elfxx-mips.c: Add support for MIPS r5900 (extension of r4000)
* config/tc-mips.c: Add support for MIPS r5900
Add M_LQ_AB and M_SQ_AB to support large values for instructions lq and sq.
* config/tc-mips.c (can_swap_branch_p, get_append_method): Detect some conditional short loops to fix a bug on the r5900 by NOP in the branch delay slot.
* config/tc-mips.c (M_MUL): Support 3 operands in multu on r5900.
* config/tc-mips.c (M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I.
* config/tc-mips.c (s_mipsset): Force 32 bit floating point on r5900.
* configure.in: Detect CPU type when target string contains r5900 (e.g. mips64r5900el-linux-gnu).
* config/tc-mips.c (mips_ip): Check parameter range of instructions mfps and mtps on r5900.
* elf/mips.h: Add MIPS machine variant number for r5900 which is compatible with old Playstation 2 software.
* opcode/mips.h: Add support for r5900 instructions including lq and sq.
* configure.tgt: Support ELF files for Sony Playstation 2 (for ps2dev and ps2sdk).
* emulparams/elf32lr5900n32.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI n32.
* emulparams/elf32lr5900.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI o32.
* Makefile.am: Add linker scripts for Sony Playstation 2 ELF files.
* opcodes/mips-dis.c: Add names for CP0 registers of r5900.
* opcodes/mips-opc.c: Add M_SQ_AB and M_LQ_AB to support larger range for instructions sq and lq.
* opcodes/mips-opc.c: Add support for MIPS r5900 CPU.
Add support for 128 bit MMI (Multimedia Instructions).
Add support for EE instructions (Emotion Engine).
Disable unsupported floating point instructions (64 bit and undefined compare operations).
Enable instructions of MIPS ISA IV which are supported by r5900.
Disable 64 bit co processor instructions.
Disable 64 bit multiplication and division instructions.
Disable instructions for co-processor 2 and 3, because these are not supported (preparation for later VU0 support (Vector Unit)).
Disable cvt.w.s because this behaves like trunc.w.s and the correct execution can't be ensured on r5900.
Add trunc.w.s using the opcode encoding of cvt.w.s on r5900. This will confuse less developers and compilers.
|
|
macros, use local variables for info struct member accesses,
update the type of the variable used to hold the instruction
word.
(print_insn_mips, print_mips16_insn_arg): Likewise.
(print_insn_mips16): Add GET_OP and GET_OP_S local macros, use
local variables for info struct member accesses.
(print_insn_micromips): Add GET_OP_S local macro.
(_print_insn_mips): Update the type of the variable used to hold
the instruction word.
|
|
* mips.h (mips_opcode): Add the exclusions field.
(OPCODE_IS_MEMBER): Remove macro.
(cpu_is_member): New inline function.
(opcode_is_member): Likewise.
opcodes/
* micromips-opc.c (micromips_opcodes): Update comment.
* mips-opc.c (mips_builtin_opcodes): Likewise. Mark coprocessor
instructions for IOCT as appropriate.
* mips-dis.c (print_insn_mips): Replace OPCODE_IS_MEMBER with
opcode_is_member.
* configure.in: Substitute NO_WMISSING_FIELD_INITIALIZERS with
the result of a check for the -Wno-missing-field-initializers
GCC option.
* Makefile.am (NO_WMISSING_FIELD_INITIALIZERS): New variable.
(mips-opc.lo): Pass $(NO_WMISSING_FIELD_INITIALIZERS) to
compilation.
(mips16-opc.lo): Likewise.
(micromips-opc.lo): Likewise.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* Makefile.in: Regenerate.
gas/
* config/tc-mips.c (NO_ISA_COP, COP_INSN): Remove macros.
(is_opcode_valid): Remove coprocessor instruction exclusions.
Replace OPCODE_IS_MEMBER with opcode_is_member.
(is_opcode_valid_16): Replace OPCODE_IS_MEMBER with
opcode_is_member.
(macro): Remove coprocessor instruction exclusions.
|
|
* i960-dis.c: Likewise.
* mips-dis.c: Likewise.
* pdp11-dis.c: Likewise.
* sh-dis.c: Likewise.
* v850-dis.c: Likewise.
* configure.in: Formatting.
* configure: Regenerate.
* rl78-decode.c: Regenerate.
* po/POTFILES.in: Regenerate.
|
|
* mips.h: Document microMIPS DSP ASE usage.
(MICROMIPSOP_MASK_DSPACC, MICROMIPSOP_SH_DSPACC): Update for
microMIPS DSP ASE support.
(MICROMIPSOP_MASK_DSPSFT, MICROMIPSOP_SH_DSPSFT): Likewise.
(MICROMIPSOP_MASK_SA3, MICROMIPSOP_SH_SA3): Likewise.
(MICROMIPSOP_MASK_SA4, MICROMIPSOP_SH_SA4): Likewise.
(MICROMIPSOP_MASK_IMM8, MICROMIPSOP_SH_IMM8): Likewise.
(MICROMIPSOP_MASK_IMM10, MICROMIPSOP_SH_IMM10): Likewise.
(MICROMIPSOP_MASK_WRDSP, MICROMIPSOP_SH_WRDSP): Likewise.
(MICROMIPSOP_MASK_BP, MICROMIPSOP_SH_BP): Likewise.
gas/
* config/tc-mips.c (macro_build) <'2'>: Handle microMIPS.
(macro) <M_BALIGN>: Update error handling.
(validate_micromips_insn) <'2', '3', '4', '5', '6'>: New cases.
<'7', '8', '0', '@', '^'>: Likewise.
(mips_ip) <'2', '3', '4', '5', '6', '7', '8'>: Handle microMIPS.
<'9'>: Fix formatting.
<'0', '@'>: Handle microMIPS.
<'^'>: New case.
gas/testsuite/
* gas/mips/micromips@mips32-dsp.d: New.
* gas/mips/micromips@mips32-dspr2.d: New.
* gas/mips/mips32-dsp.d: Remove -mips32r2.
* gas/mips/mips32-dspr2.d: Likewise.
* gas/mips/mips.exp: (mips_create_arch): Use -mips64r2
for micromips. Use run_dump_test_arches to run dsp tests.
opcodes/
* micromips-opc.c (WR_a, RD_a, MOD_a): New macros.
(DSP_VOLA): Likewise.
(D32, D33): Likewise.
(micromips_opcodes): Add DSP ASE instructions.
* micromips-dis.c (print_insn_micromips) <'2', '3'>: New cases.
<'4', '5', '6', '7', '8', '0', '^', '@'>: Likewise.
|
|
* arm-dis.c: Add necessary casts for printing integer values.
Use %s when printing string values.
* hppa-dis.c: Likewise.
* m68k-dis.c: Likewise.
* microblaze-dis.c: Likewise.
* mips-dis.c: Likewise.
* ppc-dis.c: Likewise.
* sparc-dis.c: Likewise.
* dis-asm.h (fprintf_ftype): Add ATTRIBUTE_FPTR_PRINTF_2.
|
|
* mips-dis: Remove gratuitous newline.
|
|
* config/tc-mips.c (mips_cpu_info_table): Add entry for Broadcom XLP.
* doc/c-mips.texi: Mention XLP.
opcodes/
* mips-dis.c (mips_arch_choices): Add entry for Broadcom XLP.
|
|
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* archures.c (bfd_mach_mips_octeon2): New macro
* bfd-in2.h: Regenerate.
* cpu-mips.c (I_mipsocteon2): New enum value.
(arch_info_struct): Add bfd_mach_mips_octeon2.
* elfxx-mips.c (_bfd_elf_mips_mach): Support E_MIPS_MACH_OCTEON2.
(mips_set_isa_flags): Add bfd_mach_mips_octeon2.
(mips_mach_extensions): Add bfd_mach_mips_octeon2.
gas:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* tc-mips.c (CPU_IS_OCTEON): Add Octeon2.
(mips_cpu_info_table): Add Octeon2.
* doc/c-mips.texi: Document octeon2 as an acceptable value for -march=.
gas/testsuite:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* gas/mips/mips.exp: Add Octeon2 for an architecture.
Run octeon2 test.
* gas/mips/octeon2.d: New file.
* gas/mips/octeon2.s: New file.
include/opcode:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* mips.h (INSN_CHIP_MASK): Update according to INSN_OCTEON2.
(INSN_OCTEON2): New macro.
(CPU_OCTEON2): New macro.
(OPCODE_IS_MEMBER): Add Octeon2.
opcodes:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* mips-dis.c (mips_arch_choices): Add Octeon2.
For "octeon+", just include OcteonP for the insn.
* mips-opc.c (IOCT): Include Octeon2.
(IOCTP): Include Octeon2.
(IOCT2): New macro.
(mips_builtin_opcodes): Add "laa", "laad", "lac", "lacd", "lad",
"ladd", "lai", "laid", "las", "lasd", "law", "lawd".
Move "lbux", "ldx", "lhx", "lwx", and "lwux" up to where the standard
loads are, and add IOCT2 to them.
Add "lbx" and "lhux".
Add "qmac.00", "qmac.01", "qmac.02", "qmac.03", "qmacs.00",
"qmacs.01", "qmacs.01", "qmacs.02" and "qmacs.03".
Add "zcb" and "zcbt".
|
|
2011-11-29 Andrew Pinski <apinski@cavium.com>
* mips-dis.c (mips_arch_choices): Add Octeon+.
* mips-opc.c (IOCT): Include Octeon+.
(IOCTP): New macro.
(mips_builtin_opcodes): Add "saa" and "saad".
bfd/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* archures.c (bfd_mach_mips_octeonp): New macro.
* bfd-in2.h: Regenerate.
* bfd/cpu-mips.c (I_mipsocteonp): New enum value.
(arch_info_struct): Add bfd_mach_mips_octeonp.
* elfxx-mips.c (mips_set_isa_flags): Add bfd_mach_mips_octeonp.
(mips_mach_extensions): Add bfd_mach_mips_octeonp.
include/opcodes/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* mips.h (INSN_CHIP_MASK): Update according to INSN_OCTEONP.
(INSN_OCTEONP): New macro.
(CPU_OCTEONP): New macro.
(OPCODE_IS_MEMBER): Add Octeon+.
(M_SAA_AB, M_SAAD_AB, M_SAA_OB, M_SAAD_OB): New enum values.
gas/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* config/tc-mips.c (CPU_IS_OCTEON): New macro function.
(CPU_HAS_SEQ): Change to use CPU_IS_OCTEON.
(NO_ISA_COP): Likewise.
(macro) <ld_st>: Add support when off0 is true.
Add support for M_SAA_AB, M_SAA_OB, M_SAAD_OB and M_SAAD_AB.
(mips_cpu_info_table): Add octeon+.
* doc/c-mips.texi: Document octeon+ as an acceptable value for -march=.
gas/testsuite/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* gas/mips/mips.exp: Add octeon+ for an architecture.
Run octeon-saa-saad test.
(run_dump_test_arch): For Octeon architectures, also try octeon@.
* gas/mips/octeon-pref.d: Remove -march=octeon from command line.
* gas/mips/octeon.d: Likewise.
* gas/mips/octeon-saa-saad.d: New file.
* gas/mips/octeon-saa-saad.s: New file
|
|
to infprintf to avoid shadow warning.
|
|
* config/tc-mips.c (mips_set_options): Add ase_mcu.
(mips_opts): Initialise ase_mcu to -1.
(ISA_SUPPORTS_MCU_ASE): New macro.
(MIPS_CPU_ASE_MCU): Likewise.
(is_opcode_valid): Handle MCU.
(macro_build, macro): Likewise.
(validate_mips_insn, validate_micromips_insn): Likewise.
(mips_ip): Likewise.
(options): Add OPTION_MCU and OPTION_NO_MCU.
(md_longopts): Add mmcu and mno-mcu.
(md_parse_option): Handle OPTION_MCU and OPTION_NO_MCU.
(mips_after_parse_args): Handle MCU.
(s_mipsset): Likewise.
(md_show_usage): Handle MCU options.
* doc/as.texinfo: Document -mmcu and -mno-mcu options.
* doc/c-mips.texi: Likewise, and document ".set mcu" and
".set nomcu" directives.
gas/testsuite/
* gas/mips/micromips@mcu.d: New test.
* gas/mips/mcu.d: Likewise.
* gas/mips/mcu.s: New test source.
* gas/mips/mips.exp: Run the new tests.
include/opcode/
* mips.h (OP_MASK_3BITPOS, OP_SH_3BITPOS): New macros.
(OP_MASK_OFFSET12, OP_SH_OFFSET12): Redefine.
(INSN_ASE_MASK): Add the MCU bit.
(INSN_MCU): New macro.
(M_ACLR_AB, M_ACLR_OB, M_ASET_AB, M_ASET_OB): New enum values.
(MICROMIPSOP_MASK_3BITPOS, MICROMIPSOP_SH_3BITPOS): New macros.
opcodes/
* mips-dis.c (mips_arch_choices): Enable MCU for "mips32r2"
and "mips64r2".
(print_insn_args, print_insn_micromips): Handle MCU.
* micromips-opc.c (MC): New macro.
(micromips_opcodes): Add "aclr", "aset" and "iret".
* mips-opc.c (MC): New macro.
(mips_builtin_opcodes): Add "aclr", "aset" and "iret".
|
|
2011-02-25 Chao-ying Fu <fu@mips.com>
Ilie Garbacea <ilie@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
Richard Sandiford <rdsandiford@googlemail.com>
* archures.c (bfd_mach_mips_micromips): New macro.
* cpu-mips.c (I_micromips): New enum value.
(arch_info_struct): Add bfd_mach_mips_micromips.
* elfxx-mips.h (_bfd_mips_elf_is_target_special_symbol): New
prototype.
(_bfd_mips_elf_relax_section): Likewise.
(_bfd_mips16_elf_reloc_unshuffle): Rename to...
(_bfd_mips_elf_reloc_unshuffle): ... this. Handle microMIPS
ASE.
(_bfd_mips16_elf_reloc_shuffle): Rename to...
(_bfd_mips_elf_reloc_shuffle): ... this. Handle microMIPS ASE.
(gprel16_reloc_p): Handle microMIPS ASE.
(literal_reloc_p): New function.
* elf32-mips.c (elf_micromips_howto_table_rel): New variable.
(_bfd_mips_elf32_gprel16_reloc): Handle microMIPS ASE.
(mips16_gprel_reloc): Update for _bfd_mips_elf_reloc_unshuffle
and _bfd_mips_elf_reloc_shuffle changes.
(mips_elf_gprel32_reloc): Update comment.
(micromips_reloc_map): New variable.
(bfd_elf32_bfd_reloc_type_lookup): Handle microMIPS ASE.
(mips_elf32_rtype_to_howto): Likewise.
(mips_info_to_howto_rel): Likewise.
(bfd_elf32_bfd_is_target_special_symbol): Define.
(bfd_elf32_bfd_relax_section): Likewise.
* elf64-mips.c (micromips_elf64_howto_table_rel): New variable.
(micromips_elf64_howto_table_rela): Likewise.
(mips16_gprel_reloc): Update for _bfd_mips_elf_reloc_unshuffle
and _bfd_mips_elf_reloc_shuffle changes.
(micromips_reloc_map): Likewise.
(bfd_elf64_bfd_reloc_type_lookup): Handle microMIPS ASE.
(bfd_elf64_bfd_reloc_name_lookup): Likewise.
(mips_elf64_rtype_to_howto): Likewise.
(bfd_elf64_bfd_is_target_special_symbol): Define.
* elfn32-mips.c (elf_micromips_howto_table_rel): New variable.
(elf_micromips_howto_table_rela): Likewise.
(mips16_gprel_reloc): Update for _bfd_mips_elf_reloc_unshuffle
and _bfd_mips_elf_reloc_shuffle changes.
(micromips_reloc_map): Likewise.
(bfd_elf32_bfd_reloc_type_lookup): Handle microMIPS ASE.
(bfd_elf32_bfd_reloc_name_lookup): Likewise.
(mips_elf_n32_rtype_to_howto): Likewise.
(bfd_elf32_bfd_is_target_special_symbol): Define.
* elfxx-mips.c (LA25_LUI_MICROMIPS_1): New macro.
(LA25_LUI_MICROMIPS_2): Likewise.
(LA25_J_MICROMIPS_1, LA25_J_MICROMIPS_2): Likewise.
(LA25_ADDIU_MICROMIPS_1, LA25_ADDIU_MICROMIPS_2): Likewise.
(TLS_RELOC_P): Handle microMIPS ASE.
(mips_elf_create_stub_symbol): Adjust value of stub symbol if
target is a microMIPS function.
(micromips_reloc_p): New function.
(micromips_reloc_shuffle_p): Likewise.
(got16_reloc_p, call16_reloc_p): Handle microMIPS ASE.
(got_disp_reloc_p, got_page_reloc_p): New functions.
(got_ofst_reloc_p): Likewise.
(got_hi16_reloc_p, got_lo16_reloc_p): Likewise.
(call_hi16_reloc_p, call_lo16_reloc_p): Likewise.
(hi16_reloc_p, lo16_reloc_p, jal_reloc_p): Handle microMIPS ASE.
(micromips_branch_reloc_p): New function.
(tls_gd_reloc_p, tls_ldm_reloc_p): Likewise.
(tls_gottprel_reloc_p): Likewise.
(_bfd_mips16_elf_reloc_unshuffle): Rename to...
(_bfd_mips_elf_reloc_unshuffle): ... this. Handle microMIPS
ASE.
(_bfd_mips16_elf_reloc_shuffle): Rename to...
(_bfd_mips_elf_reloc_shuffle): ... this. Handle microMIPS ASE.
(_bfd_mips_elf_lo16_reloc): Handle microMIPS ASE.
(mips_tls_got_index, mips_elf_got_page): Likewise.
(mips_elf_create_local_got_entry): Likewise.
(mips_elf_relocation_needs_la25_stub): Likewise.
(mips_elf_calculate_relocation): Likewise.
(mips_elf_perform_relocation): Likewise.
(_bfd_mips_elf_symbol_processing): Likewise.
(_bfd_mips_elf_add_symbol_hook): Likewise.
(_bfd_mips_elf_link_output_symbol_hook): Likewise.
(mips_elf_add_lo16_rel_addend): Likewise.
(_bfd_mips_elf_check_relocs): Likewise.
(mips_elf_adjust_addend): Likewise.
(_bfd_mips_elf_relocate_section): Likewise.
(mips_elf_create_la25_stub): Likewise.
(_bfd_mips_vxworks_finish_dynamic_symbol): Likewise.
(_bfd_mips_elf_gc_sweep_hook): Likewise.
(_bfd_mips_elf_is_target_special_symbol): New function.
(mips_elf_relax_delete_bytes): Likewise.
(opcode_descriptor): New structure.
(RA): New macro.
(OP32_SREG, OP32_TREG, OP16_VALID_REG): Likewise.
(b_insns_32, bc_insn_32, bz_insn_32, bzal_insn_32): New variables.
(beq_insn_32): Likewise.
(b_insn_16, bz_insn_16): New variables.
(BZC32_REG_FIELD): New macro.
(bz_rs_insns_32, bz_rt_insns_32): New variables.
(bzc_insns_32, bz_insns_16):Likewise.
(BZ16_REG, BZ16_REG_FIELD): New macros.
(jal_insn_32_bd16, jal_insn_32_bd32): New variables.
(jal_x_insn_32_bd32): Likewise.
(j_insn_32, jalr_insn_32): Likewise.
(ds_insns_32_bd16, ds_insns_32_bd32): Likewise.
(jalr_insn_16_bd16, jalr_insn_16_bd32, jr_insn_16): Likewise.
(JR16_REG): New macro.
(ds_insns_16_bd16): New variable.
(lui_insn): Likewise.
(addiu_insn, addiupc_insn): Likewise.
(ADDIUPC_REG_FIELD): New macro.
(MOVE32_RD, MOVE32_RS): Likewise.
(MOVE16_RD_FIELD, MOVE16_RS_FIELD): Likewise.
(move_insns_32, move_insns_16): New variables.
(nop_insn_32, nop_insn_16): Likewise.
(MATCH): New macro.
(find_match): New function.
(check_br16_dslot, check_br32_dslot): Likewise.
(check_br16, check_br32): Likewise.
(IS_BITSIZE): New macro.
(check_4byte_branch): New function.
(_bfd_mips_elf_relax_section): Likewise.
(_bfd_mips_elf_merge_private_bfd_data): Disallow linking MIPS16
and microMIPS modules together.
(_bfd_mips_elf_print_private_bfd_data): Handle microMIPS ASE.
* reloc.c (BFD_RELOC_MICROMIPS_7_PCREL_S1): New relocation.
(BFD_RELOC_MICROMIPS_10_PCREL_S1): Likewise.
(BFD_RELOC_MICROMIPS_16_PCREL_S1): Likewise.
(BFD_RELOC_MICROMIPS_GPREL16): Likewise.
(BFD_RELOC_MICROMIPS_JMP, BFD_RELOC_MICROMIPS_HI16): Likewise.
(BFD_RELOC_MICROMIPS_HI16_S): Likewise.
(BFD_RELOC_MICROMIPS_LO16): Likewise.
(BFD_RELOC_MICROMIPS_LITERAL): Likewise.
(BFD_RELOC_MICROMIPS_GOT16): Likewise.
(BFD_RELOC_MICROMIPS_CALL16): Likewise.
(BFD_RELOC_MICROMIPS_GOT_HI16): Likewise.
(BFD_RELOC_MICROMIPS_GOT_LO16): Likewise.
(BFD_RELOC_MICROMIPS_CALL_HI16): Likewise.
(BFD_RELOC_MICROMIPS_CALL_LO16): Likewise.
(BFD_RELOC_MICROMIPS_SUB): Likewise.
(BFD_RELOC_MICROMIPS_GOT_PAGE): Likewise.
(BFD_RELOC_MICROMIPS_GOT_OFST): Likewise.
(BFD_RELOC_MICROMIPS_GOT_DISP): Likewise.
(BFD_RELOC_MICROMIPS_HIGHEST): Likewise.
(BFD_RELOC_MICROMIPS_HIGHER): Likewise.
(BFD_RELOC_MICROMIPS_SCN_DISP): Likewise.
(BFD_RELOC_MICROMIPS_JALR): Likewise.
(BFD_RELOC_MICROMIPS_TLS_GD): Likewise.
(BFD_RELOC_MICROMIPS_TLS_LDM): Likewise.
(BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16): Likewise.
(BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16): Likewise.
(BFD_RELOC_MICROMIPS_TLS_GOTTPREL): Likewise.
(BFD_RELOC_MICROMIPS_TLS_TPREL_HI16): Likewise.
(BFD_RELOC_MICROMIPS_TLS_TPREL_LO16): Likewise.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
binutils/
2011-02-25 Chao-ying Fu <fu@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* readelf.c (get_machine_flags): Handle microMIPS ASE.
(get_mips_symbol_other): Likewise.
gas/
2011-02-25 Maciej W. Rozycki <macro@codesourcery.com>
Chao-ying Fu <fu@mips.com>
Richard Sandiford <rdsandiford@googlemail.com>
* config/tc-mips.h (mips_segment_info): Add one bit for
microMIPS.
(TC_LABEL_IS_LOCAL): New macro.
(mips_label_is_local): New prototype.
* config/tc-mips.c (S0, S7): New macros.
(emit_branch_likely_macro): New variable.
(mips_set_options): Add micromips.
(mips_opts): Initialise micromips to -1.
(file_ase_micromips): New variable.
(CPU_HAS_MICROMIPS): New macro.
(hilo_interlocks): Set for microMIPS too.
(gpr_interlocks): Likewise.
(cop_interlocks): Likewise.
(cop_mem_interlocks): Likewise.
(HAVE_CODE_COMPRESSION): New macro.
(micromips_op_hash): New variable.
(micromips_nop16_insn, micromips_nop32_insn): New variables.
(NOP_INSN): Handle microMIPS ASE.
(mips32_to_micromips_reg_b_map): New macro.
(mips32_to_micromips_reg_c_map): Likewise.
(mips32_to_micromips_reg_d_map): Likewise.
(mips32_to_micromips_reg_e_map): Likewise.
(mips32_to_micromips_reg_f_map): Likewise.
(mips32_to_micromips_reg_g_map): Likewise.
(mips32_to_micromips_reg_l_map): Likewise.
(mips32_to_micromips_reg_n_map): Likewise.
(mips32_to_micromips_reg_h_map): New variable.
(mips32_to_micromips_reg_m_map): Likewise.
(mips32_to_micromips_reg_q_map): Likewise.
(micromips_to_32_reg_h_map): New variable.
(micromips_to_32_reg_i_map): Likewise.
(micromips_to_32_reg_m_map): Likewise.
(micromips_to_32_reg_q_map): Likewise.
(micromips_to_32_reg_b_map): New macro.
(micromips_to_32_reg_c_map): Likewise.
(micromips_to_32_reg_d_map): Likewise.
(micromips_to_32_reg_e_map): Likewise.
(micromips_to_32_reg_f_map): Likewise.
(micromips_to_32_reg_g_map): Likewise.
(micromips_to_32_reg_l_map): Likewise.
(micromips_to_32_reg_n_map): Likewise.
(micromips_imm_b_map, micromips_imm_c_map): New macros.
(RELAX_DELAY_SLOT_16BIT): New macro.
(RELAX_DELAY_SLOT_SIZE_FIRST): Likewise.
(RELAX_DELAY_SLOT_SIZE_SECOND): Likewise.
(RELAX_MICROMIPS_ENCODE, RELAX_MICROMIPS_P): New macros.
(RELAX_MICROMIPS_TYPE, RELAX_MICROMIPS_AT): Likewise.
(RELAX_MICROMIPS_U16BIT, RELAX_MICROMIPS_UNCOND): Likewise.
(RELAX_MICROMIPS_COMPACT, RELAX_MICROMIPS_LINK): Likewise.
(RELAX_MICROMIPS_RELAX32, RELAX_MICROMIPS_TOOFAR16): Likewise.
(RELAX_MICROMIPS_MARK_TOOFAR16): Likewise.
(RELAX_MICROMIPS_CLEAR_TOOFAR16): Likewise.
(RELAX_MICROMIPS_TOOFAR32): Likewise.
(RELAX_MICROMIPS_MARK_TOOFAR32): Likewise.
(RELAX_MICROMIPS_CLEAR_TOOFAR32): Likewise.
(INSERT_OPERAND, EXTRACT_OPERAND): Handle microMIPS ASE.
(mips_macro_warning): Add delay_slot_16bit_p, delay_slot_32bit_p,
fsize and insns.
(mips_mark_labels): New function.
(mips16_small, mips16_ext): Remove variables, replacing with...
(forced_insn_size): ... this.
(append_insn, mips16_ip): Update accordingly.
(micromips_insn_length): New function.
(insn_length): Return the length of microMIPS instructions.
(mips_record_mips16_mode): Rename to...
(mips_record_compressed_mode): ... this. Handle microMIPS ASE.
(install_insn): Handle microMIPS ASE.
(reglist_lookup): New function.
(is_size_valid, is_delay_slot_valid): Likewise.
(md_begin): Handle microMIPS ASE.
(md_assemble): Likewise. Update for append_insn interface change.
(micromips_reloc_p): New function.
(got16_reloc_p): Handle microMIPS ASE.
(hi16_reloc_p): Likewise.
(lo16_reloc_p): Likewise.
(jmp_reloc_p): New function.
(jalr_reloc_p): Likewise.
(matching_lo_reloc): Handle microMIPS ASE.
(insn_uses_reg, reg_needs_delay): Likewise.
(mips_move_labels): Likewise.
(mips16_mark_labels): Rename to...
(mips_compressed_mark_labels): ... this. Handle microMIPS ASE.
(gpr_mod_mask): New function.
(gpr_read_mask, gpr_write_mask): Handle microMIPS ASE.
(fpr_read_mask, fpr_write_mask): Likewise.
(insns_between, nops_for_vr4130, nops_for_insn): Likewise.
(fix_loongson2f_nop, fix_loongson2f_jump): Likewise.
(MICROMIPS_LABEL_CHAR): New macro.
(micromips_target_label, micromips_target_name): New variables.
(micromips_label_name, micromips_label_expr): New functions.
(micromips_label_inc, micromips_add_label): Likewise.
(mips_label_is_local): Likewise.
(micromips_map_reloc): Likewise.
(can_swap_branch_p): Handle microMIPS ASE.
(append_insn): Add expansionp argument. Handle microMIPS ASE.
(start_noreorder, end_noreorder): Handle microMIPS ASE.
(macro_start, macro_warning, macro_end): Likewise.
(brk_fmt, cop12_fmt, jalr_fmt, lui_fmt): New variables.
(mem12_fmt, mfhl_fmt, shft_fmt, trap_fmt): Likewise.
(BRK_FMT, COP12_FMT, JALR_FMT, LUI_FMT): New macros.
(MEM12_FMT, MFHL_FMT, SHFT_FMT, TRAP_FMT): Likewise.
(macro_build): Handle microMIPS ASE. Update for append_insn
interface change.
(mips16_macro_build): Update for append_insn interface change.
(macro_build_jalr): Handle microMIPS ASE.
(macro_build_lui): Likewise. Simplify.
(load_register): Handle microMIPS ASE.
(load_address): Likewise.
(move_register): Likewise.
(macro_build_branch_likely): New function.
(macro_build_branch_ccl): Likewise.
(macro_build_branch_rs): Likewise.
(macro_build_branch_rsrt): Likewise.
(macro): Handle microMIPS ASE.
(validate_micromips_insn): New function.
(expr_const_in_range): Likewise.
(mips_ip): Handle microMIPS ASE.
(options): Add OPTION_MICROMIPS and OPTION_NO_MICROMIPS.
(md_longopts): Add mmicromips and mno-micromips.
(md_parse_option): Handle OPTION_MICROMIPS and
OPTION_NO_MICROMIPS.
(mips_after_parse_args): Handle microMIPS ASE.
(md_pcrel_from): Handle microMIPS relocations.
(mips_force_relocation): Likewise.
(md_apply_fix): Likewise.
(mips_align): Handle microMIPS ASE.
(s_mipsset): Likewise.
(s_cpload, s_cpsetup, s_cpreturn): Use relocation wrappers.
(s_dtprel_internal): Likewise.
(s_gpword, s_gpdword): Likewise.
(s_insn): Handle microMIPS ASE.
(s_mips_stab): Likewise.
(relaxed_micromips_32bit_branch_length): New function.
(relaxed_micromips_16bit_branch_length): New function.
(md_estimate_size_before_relax): Handle microMIPS ASE.
(mips_fix_adjustable): Likewise.
(tc_gen_reloc): Handle microMIPS relocations.
(mips_relax_frag): Handle microMIPS ASE.
(md_convert_frag): Likewise.
(mips_frob_file_after_relocs): Likewise.
(mips_elf_final_processing): Likewise.
(mips_nop_opcode): Likewise.
(mips_handle_align): Likewise.
(md_show_usage): Handle microMIPS options.
* symbols.c (TC_LABEL_IS_LOCAL): New macro.
(S_IS_LOCAL): Add a TC_LABEL_IS_LOCAL check.
* doc/as.texinfo (Target MIPS options): Add -mmicromips and
-mno-micromips.
(-mmicromips, -mno-micromips): New options.
* doc/c-mips.texi (-mmicromips, -mno-micromips): New options.
(MIPS ISA): Document .set micromips and .set nomicromips.
(MIPS insn): Update for microMIPS support.
gas/testsuite/
2011-02-25 Maciej W. Rozycki <macro@codesourcery.com>
Chao-ying Fu <fu@mips.com>
Richard Sandiford <rdsandiford@googlemail.com>
* gas/mips/micromips.d: New test.
* gas/mips/micromips-branch-delay.d: Likewise.
* gas/mips/micromips-branch-relax.d: Likewise.
* gas/mips/micromips-branch-relax-pic.d: Likewise.
* gas/mips/micromips-size-1.d: Likewise.
* gas/mips/micromips-trap.d: Likewise.
* gas/mips/micromips.l: New stderr output.
* gas/mips/micromips-branch-delay.l: Likewise.
* gas/mips/micromips-branch-relax.l: Likewise.
* gas/mips/micromips-branch-relax-pic.l: Likewise.
* gas/mips/micromips-size-0.l: New list test.
* gas/mips/micromips-size-1.l: New stderr output.
* gas/mips/micromips.s: New test source.
* gas/mips/micromips-branch-delay.s: Likewise.
* gas/mips/micromips-branch-relax.s: Likewise.
* gas/mips/micromips-size-0.s: Likewise.
* gas/mips/micromips-size-1.s: Likewise.
* gas/mips/mips.exp: Run the new tests.
* gas/mips/dli.s: Use .p2align.
* gas/mips/elf_ase_micromips.d: New test.
* gas/mips/elf_ase_micromips-2.d: Likewise.
* gas/mips/micromips@abs.d: Likewise.
* gas/mips/micromips@add.d: Likewise.
* gas/mips/micromips@alnv_ps-swap.d: Likewise.
* gas/mips/micromips@and.d: Likewise.
* gas/mips/micromips@beq.d: Likewise.
* gas/mips/micromips@bge.d: Likewise.
* gas/mips/micromips@bgeu.d: Likewise.
* gas/mips/micromips@blt.d: Likewise.
* gas/mips/micromips@bltu.d: Likewise.
* gas/mips/micromips@branch-likely.d: Likewise.
* gas/mips/micromips@branch-misc-1.d: Likewise.
* gas/mips/micromips@branch-misc-2-64.d: Likewise.
* gas/mips/micromips@branch-misc-2.d: Likewise.
* gas/mips/micromips@branch-misc-2pic-64.d: Likewise.
* gas/mips/micromips@branch-misc-2pic.d: Likewise.
* gas/mips/micromips@branch-misc-4-64.d: Likewise.
* gas/mips/micromips@branch-misc-4.d: Likewise.
* gas/mips/micromips@branch-self.d: Likewise.
* gas/mips/micromips@cache.d: Likewise.
* gas/mips/micromips@daddi.d: Likewise.
* gas/mips/micromips@dli.d: Likewise.
* gas/mips/micromips@elf-jal.d: Likewise.
* gas/mips/micromips@elf-rel2.d: Likewise.
* gas/mips/micromips@elfel-rel2.d: Likewise.
* gas/mips/micromips@elf-rel4.d: Likewise.
* gas/mips/micromips@jal-svr4pic.d: Likewise.
* gas/mips/micromips@jal-svr4pic-noreorder.d: Likewise.
* gas/mips/micromips@lb-svr4pic-ilocks.d: Likewise.
* gas/mips/micromips@li.d: Likewise.
* gas/mips/micromips@loc-swap-dis.d: Likewise.
* gas/mips/micromips@loc-swap.d: Likewise.
* gas/mips/micromips@mips1-fp.d: Likewise.
* gas/mips/micromips@mips32-cp2.d: Likewise.
* gas/mips/micromips@mips32-imm.d: Likewise.
* gas/mips/micromips@mips32-sf32.d: Likewise.
* gas/mips/micromips@mips32.d: Likewise.
* gas/mips/micromips@mips32r2-cp2.d: Likewise.
* gas/mips/micromips@mips32r2-fp32.d: Likewise.
* gas/mips/micromips@mips32r2-sync.d: Likewise.
* gas/mips/micromips@mips32r2.d: Likewise.
* gas/mips/micromips@mips4-branch-likely.d: Likewise.
* gas/mips/micromips@mips4-fp.d: Likewise.
* gas/mips/micromips@mips4.d: Likewise.
* gas/mips/micromips@mips5.d: Likewise.
* gas/mips/micromips@mips64-cp2.d: Likewise.
* gas/mips/micromips@mips64.d: Likewise.
* gas/mips/micromips@mips64r2.d: Likewise.
* gas/mips/micromips@pref.d: Likewise.
* gas/mips/micromips@relax-at.d: Likewise.
* gas/mips/micromips@relax.d: Likewise.
* gas/mips/micromips@rol-hw.d: Likewise.
* gas/mips/micromips@uld2-eb.d: Likewise.
* gas/mips/micromips@uld2-el.d: Likewise.
* gas/mips/micromips@ulh2-eb.d: Likewise.
* gas/mips/micromips@ulh2-el.d: Likewise.
* gas/mips/micromips@ulw2-eb-ilocks.d: Likewise.
* gas/mips/micromips@ulw2-el-ilocks.d: Likewise.
* gas/mips/cache.d: Likewise.
* gas/mips/daddi.d: Likewise.
* gas/mips/mips32-imm.d: Likewise.
* gas/mips/pref.d: Likewise.
* gas/mips/elf-rel27.d: Handle microMIPS ASE.
* gas/mips/l_d.d: Likewise.
* gas/mips/l_d-n32.d: Likewise.
* gas/mips/l_d-n64.d: Likewise.
* gas/mips/ld.d: Likewise.
* gas/mips/ld-n32.d: Likewise.
* gas/mips/ld-n64.d: Likewise.
* gas/mips/s_d.d: Likewise.
* gas/mips/s_d-n32.d: Likewise.
* gas/mips/s_d-n64.d: Likewise.
* gas/mips/sd.d: Likewise.
* gas/mips/sd-n32.d: Likewise.
* gas/mips/sd-n64.d: Likewise.
* gas/mips/mips32.d: Update immediates.
* gas/mips/micromips@mips32-cp2.s: New test source.
* gas/mips/micromips@mips32-imm.s: Likewise.
* gas/mips/micromips@mips32r2-cp2.s: Likewise.
* gas/mips/micromips@mips64-cp2.s: Likewise.
* gas/mips/cache.s: Likewise.
* gas/mips/daddi.s: Likewise.
* gas/mips/mips32-imm.s: Likewise.
* gas/mips/elf-rel4.s: Handle microMIPS ASE.
* gas/mips/lb-pic.s: Likewise.
* gas/mips/ld.s: Likewise.
* gas/mips/mips32.s: Likewise.
* gas/mips/mips.exp: Add the micromips arch. Exclude mips16e
from micromips. Run mips32-imm.
* gas/mips/jal-mask-11.d: New test.
* gas/mips/jal-mask-12.d: Likewise.
* gas/mips/micromips@jal-mask-11.d: Likewise.
* gas/mips/jal-mask-1.s: Source for the new tests.
* gas/mips/jal-mask-21.d: New test.
* gas/mips/jal-mask-22.d: Likewise.
* gas/mips/micromips@jal-mask-12.d: Likewise.
* gas/mips/jal-mask-2.s: Source for the new tests.
* gas/mips/mips.exp: Run the new tests.
* gas/mips/mips16-e.d: Add --special-syms to `objdump'.
* gas/mips/tmips16-e.d: Likewise.
* gas/mips/mipsel16-e.d: Likewise.
* gas/mips/tmipsel16-e.d: Likewise.
* gas/mips/and.s: Adjust padding.
* gas/mips/beq.s: Likewise.
* gas/mips/bge.s: Likewise.
* gas/mips/bgeu.s: Likewise.
* gas/mips/blt.s: Likewise.
* gas/mips/bltu.s: Likewise.
* gas/mips/branch-misc-2.s: Likewise.
* gas/mips/jal.s: Likewise.
* gas/mips/li.s: Likewise.
* gas/mips/mips4.s: Likewise.
* gas/mips/mips4-fp.s: Likewise.
* gas/mips/relax.s: Likewise.
* gas/mips/and.d: Update accordingly.
* gas/mips/elf-jal.d: Likewise.
* gas/mips/jal.d: Likewise.
* gas/mips/li.d: Likewise.
* gas/mips/relax-at.d: Likewise.
* gas/mips/relax.d: Likewise.
include/elf/
2011-02-25 Chao-ying Fu <fu@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* mips.h (R_MICROMIPS_min): New relocations.
(R_MICROMIPS_26_S1): Likewise.
(R_MICROMIPS_HI16, R_MICROMIPS_LO16): Likewise.
(R_MICROMIPS_GPREL16, R_MICROMIPS_LITERAL): Likewise.
(R_MICROMIPS_GOT16, R_MICROMIPS_PC7_S1): Likewise.
(R_MICROMIPS_PC10_S1, R_MICROMIPS_PC16_S1): Likewise.
(R_MICROMIPS_CALL16, R_MICROMIPS_GOT_DISP): Likewise.
(R_MICROMIPS_GOT_PAGE, R_MICROMIPS_GOT_OFST): Likewise.
(R_MICROMIPS_GOT_HI16, R_MICROMIPS_GOT_LO16): Likewise.
(R_MICROMIPS_SUB, R_MICROMIPS_HIGHER): Likewise.
(R_MICROMIPS_HIGHEST, R_MICROMIPS_CALL_HI16): Likewise.
(R_MICROMIPS_CALL_LO16, R_MICROMIPS_SCN_DISP): Likewise.
(R_MICROMIPS_JALR, R_MICROMIPS_HI0_LO16): Likewise.
(R_MICROMIPS_TLS_GD, R_MICROMIPS_TLS_LDM): Likewise.
(R_MICROMIPS_TLS_DTPREL_HI, R_MICROMIPS_TLS_DTPREL_LO): Likewise.
(R_MICROMIPS_TLS_GOTTPREL): Likewise.
(R_MICROMIPS_TLS_TPREL_HI16): Likewise.
(R_MICROMIPS_TLS_TPREL_LO16): Likewise.
(R_MICROMIPS_GPREL7_S2, R_MICROMIPS_PC23_S2): Likewise.
(R_MICROMIPS_max): Likewise.
(EF_MIPS_ARCH_ASE_MICROMIPS): New macro.
(STO_MIPS_ISA, STO_MIPS_FLAGS): Likewise.
(ELF_ST_IS_MIPS_PLT, ELF_ST_SET_MIPS_PLT): Likewise.
(STO_MICROMIPS): Likewise.
(ELF_ST_IS_MICROMIPS, ELF_ST_SET_MICROMIPS): Likewise.
(ELF_ST_IS_COMPRESSED): Likewise.
(STO_MIPS_PLT, STO_MIPS_PIC): Rework.
(ELF_ST_IS_MIPS_PIC, ELF_ST_SET_MIPS_PIC): Likewise.
(STO_MIPS16, ELF_ST_IS_MIPS16, ELF_ST_SET_MIPS16): Likewise.
include/opcode/
2011-02-25 Chao-ying Fu <fu@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* mips.h (OP_MASK_EXTLSB, OP_SH_EXTLSB): New macros.
(OP_MASK_STYPE, OP_SH_STYPE): Likewise.
(OP_MASK_CODE10, OP_SH_CODE10): Likewise.
(OP_MASK_TRAP, OP_SH_TRAP): Likewise.
(OP_MASK_OFFSET12, OP_SH_OFFSET12): Likewise.
(OP_MASK_OFFSET10, OP_SH_OFFSET10): Likewise.
(OP_MASK_RS3, OP_SH_RS3): Likewise.
(OP_MASK_MB, OP_SH_MB, OP_MASK_MC, OP_SH_MC): Likewise.
(OP_MASK_MD, OP_SH_MD, OP_MASK_ME, OP_SH_ME): Likewise.
(OP_MASK_MF, OP_SH_MF, OP_MASK_MG, OP_SH_MG): Likewise.
(OP_MASK_MJ, OP_SH_MJ, OP_MASK_ML, OP_SH_ML): Likewise.
(OP_MASK_MP, OP_SH_MP, OP_MASK_MQ, OP_SH_MQ): Likewise.
(OP_MASK_IMMA, OP_SH_IMMA, OP_MASK_IMMB, OP_SH_IMMB): Likewise.
(OP_MASK_IMMC, OP_SH_IMMC, OP_MASK_IMMF, OP_SH_IMMF): Likewise.
(OP_MASK_IMMG, OP_SH_IMMG, OP_MASK_IMMH, OP_SH_IMMH): Likewise.
(OP_MASK_IMMI, OP_SH_IMMI, OP_MASK_IMMJ, OP_SH_IMMJ): Likewise.
(OP_MASK_IMML, OP_SH_IMML, OP_MASK_IMMM, OP_SH_IMMM): Likewise.
(OP_MASK_IMMN, OP_SH_IMMN, OP_MASK_IMMO, OP_SH_IMMO): Likewise.
(OP_MASK_IMMP, OP_SH_IMMP, OP_MASK_IMMQ, OP_SH_IMMQ): Likewise.
(OP_MASK_IMMU, OP_SH_IMMU, OP_MASK_IMMW, OP_SH_IMMW): Likewise.
(OP_MASK_IMMX, OP_SH_IMMX, OP_MASK_IMMY, OP_SH_IMMY): Likewise.
(INSN_WRITE_GPR_S): New macro.
(INSN2_BRANCH_DELAY_16BIT, INSN2_BRANCH_DELAY_32BIT): Likewise.
(INSN2_READ_FPR_D): Likewise.
(INSN2_MOD_GPR_MB, INSN2_MOD_GPR_MC): Likewise.
(INSN2_MOD_GPR_MD, INSN2_MOD_GPR_ME): Likewise.
(INSN2_MOD_GPR_MF, INSN2_MOD_GPR_MG): Likewise.
(INSN2_MOD_GPR_MJ, INSN2_MOD_GPR_MP): Likewise.
(INSN2_MOD_GPR_MQ, INSN2_MOD_SP): Likewise.
(INSN2_READ_GPR_31, INSN2_READ_GP, INSN2_READ_PC): Likewise.
(INSN2_UNCOND_BRANCH, INSN2_COND_BRANCH): Likewise.
(INSN2_MOD_GPR_MHI, INSN2_MOD_GPR_MM, INSN2_MOD_GPR_MN): Likewise.
(CPU_MICROMIPS): New macro.
(M_BC1FL, M_BC1TL, M_BC2FL, M_BC2TL): New enum values.
(M_BEQL, M_BGEZ, M_BGEZL, M_BGEZALL, M_BGTZ, M_BGTZL): Likewise.
(M_BLEZ, M_BLEZL, M_BLTZ, M_BLTZL, M_BLTZALL, M_BNEL): Likewise.
(M_CACHE_OB, M_JALS_1, M_JALS_2, M_JALS_A): Likewise.
(M_LDC2_OB, M_LDL_OB, M_LDM_AB, M_LDM_OB): Likewise.
(M_LDP_AB, M_LDP_OB, M_LDR_OB, M_LL_OB, M_LLD_OB): Likewise.
(M_LWC2_OB, M_LWL_OB, M_LWM_AB, M_LWM_OB): Likewise.
(M_LWP_AB, M_LWP_OB, M_LWR_OB): Likewise.
(M_LWU_OB, M_PREF_OB, M_SC_OB, M_SCD_OB): Likewise.
(M_SDC2_OB, M_SDL_OB, M_SDM_AB, M_SDM_OB): Likewise.
(M_SDP_AB, M_SDP_OB, M_SDR_OB): Likewise.
(M_SWC2_OB, M_SWL_OB, M_SWM_AB, M_SWM_OB): Likewise.
(M_SWP_AB, M_SWP_OB, M_SWR_OB): Likewise.
(MICROMIPSOP_MASK_MAJOR, MICROMIPSOP_SH_MAJOR): New macros.
(MICROMIPSOP_MASK_IMMEDIATE, MICROMIPSOP_SH_IMMEDIATE): Likewise.
(MICROMIPSOP_MASK_DELTA, MICROMIPSOP_SH_DELTA): Likewise.
(MICROMIPSOP_MASK_CODE10, MICROMIPSOP_SH_CODE10): Likewise.
(MICROMIPSOP_MASK_TRAP, MICROMIPSOP_SH_TRAP): Likewise.
(MICROMIPSOP_MASK_SHAMT, MICROMIPSOP_SH_SHAMT): Likewise.
(MICROMIPSOP_MASK_TARGET, MICROMIPSOP_SH_TARGET): Likewise.
(MICROMIPSOP_MASK_EXTLSB, MICROMIPSOP_SH_EXTLSB): Likewise.
(MICROMIPSOP_MASK_EXTMSBD, MICROMIPSOP_SH_EXTMSBD): Likewise.
(MICROMIPSOP_MASK_INSMSB, MICROMIPSOP_SH_INSMSB): Likewise.
(MICROMIPSOP_MASK_CODE, MICROMIPSOP_SH_CODE): Likewise.
(MICROMIPSOP_MASK_CODE2, MICROMIPSOP_SH_CODE2): Likewise.
(MICROMIPSOP_MASK_CACHE, MICROMIPSOP_SH_CACHE): Likewise.
(MICROMIPSOP_MASK_SEL, MICROMIPSOP_SH_SEL): Likewise.
(MICROMIPSOP_MASK_OFFSET12, MICROMIPSOP_SH_OFFSET12): Likewise.
(MICROMIPSOP_MASK_3BITPOS, MICROMIPSOP_SH_3BITPOS): Likewise.
(MICROMIPSOP_MASK_STYPE, MICROMIPSOP_SH_STYPE): Likewise.
(MICROMIPSOP_MASK_OFFSET10, MICROMIPSOP_SH_OFFSET10): Likewise.
(MICROMIPSOP_MASK_RS, MICROMIPSOP_SH_RS): Likewise.
(MICROMIPSOP_MASK_RT, MICROMIPSOP_SH_RT): Likewise.
(MICROMIPSOP_MASK_RD, MICROMIPSOP_SH_RD): Likewise.
(MICROMIPSOP_MASK_FS, MICROMIPSOP_SH_FS): Likewise.
(MICROMIPSOP_MASK_FT, MICROMIPSOP_SH_FT): Likewise.
(MICROMIPSOP_MASK_FD, MICROMIPSOP_SH_FD): Likewise.
(MICROMIPSOP_MASK_FR, MICROMIPSOP_SH_FR): Likewise.
(MICROMIPSOP_MASK_RS3, MICROMIPSOP_SH_RS3): Likewise.
(MICROMIPSOP_MASK_PREFX, MICROMIPSOP_SH_PREFX): Likewise.
(MICROMIPSOP_MASK_BCC, MICROMIPSOP_SH_BCC): Likewise.
(MICROMIPSOP_MASK_CCC, MICROMIPSOP_SH_CCC): Likewise.
(MICROMIPSOP_MASK_COPZ, MICROMIPSOP_SH_COPZ): Likewise.
(MICROMIPSOP_MASK_MB, MICROMIPSOP_SH_MB): Likewise.
(MICROMIPSOP_MASK_MC, MICROMIPSOP_SH_MC): Likewise.
(MICROMIPSOP_MASK_MD, MICROMIPSOP_SH_MD): Likewise.
(MICROMIPSOP_MASK_ME, MICROMIPSOP_SH_ME): Likewise.
(MICROMIPSOP_MASK_MF, MICROMIPSOP_SH_MF): Likewise.
(MICROMIPSOP_MASK_MG, MICROMIPSOP_SH_MG): Likewise.
(MICROMIPSOP_MASK_MH, MICROMIPSOP_SH_MH): Likewise.
(MICROMIPSOP_MASK_MI, MICROMIPSOP_SH_MI): Likewise.
(MICROMIPSOP_MASK_MJ, MICROMIPSOP_SH_MJ): Likewise.
(MICROMIPSOP_MASK_ML, MICROMIPSOP_SH_ML): Likewise.
(MICROMIPSOP_MASK_MM, MICROMIPSOP_SH_MM): Likewise.
(MICROMIPSOP_MASK_MN, MICROMIPSOP_SH_MN): Likewise.
(MICROMIPSOP_MASK_MP, MICROMIPSOP_SH_MP): Likewise.
(MICROMIPSOP_MASK_MQ, MICROMIPSOP_SH_MQ): Likewise.
(MICROMIPSOP_MASK_IMMA, MICROMIPSOP_SH_IMMA): Likewise.
(MICROMIPSOP_MASK_IMMB, MICROMIPSOP_SH_IMMB): Likewise.
(MICROMIPSOP_MASK_IMMC, MICROMIPSOP_SH_IMMC): Likewise.
(MICROMIPSOP_MASK_IMMD, MICROMIPSOP_SH_IMMD): Likewise.
(MICROMIPSOP_MASK_IMME, MICROMIPSOP_SH_IMME): Likewise.
(MICROMIPSOP_MASK_IMMF, MICROMIPSOP_SH_IMMF): Likewise.
(MICROMIPSOP_MASK_IMMG, MICROMIPSOP_SH_IMMG): Likewise.
(MICROMIPSOP_MASK_IMMH, MICROMIPSOP_SH_IMMH): Likewise.
(MICROMIPSOP_MASK_IMMI, MICROMIPSOP_SH_IMMI): Likewise.
(MICROMIPSOP_MASK_IMMJ, MICROMIPSOP_SH_IMMJ): Likewise.
(MICROMIPSOP_MASK_IMML, MICROMIPSOP_SH_IMML): Likewise.
(MICROMIPSOP_MASK_IMMM, MICROMIPSOP_SH_IMMM): Likewise.
(MICROMIPSOP_MASK_IMMN, MICROMIPSOP_SH_IMMN): Likewise.
(MICROMIPSOP_MASK_IMMO, MICROMIPSOP_SH_IMMO): Likewise.
(MICROMIPSOP_MASK_IMMP, MICROMIPSOP_SH_IMMP): Likewise.
(MICROMIPSOP_MASK_IMMQ, MICROMIPSOP_SH_IMMQ): Likewise.
(MICROMIPSOP_MASK_IMMU, MICROMIPSOP_SH_IMMU): Likewise.
(MICROMIPSOP_MASK_IMMW, MICROMIPSOP_SH_IMMW): Likewise.
(MICROMIPSOP_MASK_IMMX, MICROMIPSOP_SH_IMMX): Likewise.
(MICROMIPSOP_MASK_IMMY, MICROMIPSOP_SH_IMMY): Likewise.
(MICROMIPSOP_MASK_CODE, MICROMIPSOP_SH_CODE): Likewise.
(MICROMIPSOP_MASK_CODE2, MICROMIPSOP_SH_CODE2): Likewise.
(MICROMIPSOP_MASK_CACHE, MICROMIPSOP_SH_CACHE): Likewise.
(MICROMIPSOP_MASK_CODE20, MICROMIPSOP_SH_CODE20): Likewise.
(MICROMIPSOP_MASK_PERFREG, MICROMIPSOP_SH_PERFREG): Likewise.
(MICROMIPSOP_MASK_CODE19, MICROMIPSOP_SH_CODE19): Likewise.
(MICROMIPSOP_MASK_ALN, MICROMIPSOP_SH_ALN): Likewise.
(MICROMIPSOP_MASK_VECBYTE, MICROMIPSOP_SH_VECBYTE): Likewise.
(MICROMIPSOP_MASK_VECALIGN, MICROMIPSOP_SH_VECALIGN): Likewise.
(MICROMIPSOP_MASK_DSPACC, MICROMIPSOP_SH_DSPACC): Likewise.
(MICROMIPSOP_MASK_DSPACC_S, MICROMIPSOP_SH_DSPACC_S): Likewise.
(MICROMIPSOP_MASK_DSPSFT, MICROMIPSOP_SH_DSPSFT): Likewise.
(MICROMIPSOP_MASK_DSPSFT_7, MICROMIPSOP_SH_DSPSFT_7): Likewise.
(MICROMIPSOP_MASK_SA3, MICROMIPSOP_SH_SA3): Likewise.
(MICROMIPSOP_MASK_SA4, MICROMIPSOP_SH_SA4): Likewise.
(MICROMIPSOP_MASK_IMM8, MICROMIPSOP_SH_IMM8): Likewise.
(MICROMIPSOP_MASK_IMM10, MICROMIPSOP_SH_IMM10): Likewise.
(MICROMIPSOP_MASK_WRDSP, MICROMIPSOP_SH_WRDSP): Likewise.
(MICROMIPSOP_MASK_RDDSP, MICROMIPSOP_SH_RDDSP): Likewise.
(MICROMIPSOP_MASK_BP, MICROMIPSOP_SH_BP): Likewise.
(MICROMIPSOP_MASK_MT_U, MICROMIPSOP_SH_MT_U): Likewise.
(MICROMIPSOP_MASK_MT_H, MICROMIPSOP_SH_MT_H): Likewise.
(MICROMIPSOP_MASK_MTACC_T, MICROMIPSOP_SH_MTACC_T): Likewise.
(MICROMIPSOP_MASK_MTACC_D, MICROMIPSOP_SH_MTACC_D): Likewise.
(MICROMIPSOP_MASK_BBITIND, MICROMIPSOP_SH_BBITIND): Likewise.
(MICROMIPSOP_MASK_CINSPOS, MICROMIPSOP_SH_CINSPOS): Likewise.
(MICROMIPSOP_MASK_CINSLM1, MICROMIPSOP_SH_CINSLM1): Likewise.
(MICROMIPSOP_MASK_SEQI, MICROMIPSOP_SH_SEQI): Likewise.
(micromips_opcodes): New declaration.
(bfd_micromips_num_opcodes): Likewise.
ld/testsuite/
2011-02-25 Catherine Moore <clm@codesourcery.com>
Chao-ying Fu <fu@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* lib/ld-lib.exp (run_dump_test): Support distinct assembler
flags for the same source named multiple times.
* ld-mips-elf/jalx-1.s: New test source.
* ld-mips-elf/jalx-1.d: New test output.
* ld-mips-elf/jalx-1.ld: New test linker script.
* ld-mips-elf/jalx-2-main.s: New test source.
* ld-mips-elf/jalx-2-ex.s: Likewise.
* ld-mips-elf/jalx-2-printf.s: Likewise.
* ld-mips-elf/jalx-2.dd: New test output.
* ld-mips-elf/jalx-2.ld: New test linker script.
* ld-mips-elf/mips16-and-micromips.d: New test.
* ld-mips-elf/mips-elf.exp: Run the new tests
opcodes/
2011-02-25 Chao-ying Fu <fu@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* micromips-opc.c: New file.
* mips-dis.c (micromips_to_32_reg_b_map): New array.
(micromips_to_32_reg_c_map, micromips_to_32_reg_d_map): Likewise.
(micromips_to_32_reg_e_map, micromips_to_32_reg_f_map): Likewise.
(micromips_to_32_reg_g_map, micromips_to_32_reg_l_map): Likewise.
(micromips_to_32_reg_q_map): Likewise.
(micromips_imm_b_map, micromips_imm_c_map): Likewise.
(micromips_ase): New variable.
(is_micromips): New function.
(set_default_mips_dis_options): Handle microMIPS ASE.
(print_insn_micromips): New function.
(is_compressed_mode_p): Likewise.
(_print_insn_mips): Handle microMIPS instructions.
* Makefile.am (CFILES): Add micromips-opc.c.
* configure.in (bfd_mips_arch): Add micromips-opc.lo.
* Makefile.in: Regenerate.
* configure: Regenerate.
* mips-dis.c (micromips_to_32_reg_h_map): New variable.
(micromips_to_32_reg_i_map): Likewise.
(micromips_to_32_reg_m_map): Likewise.
(micromips_to_32_reg_n_map): New macro.
|
|
|
|
2010-12-14 Mingjie Xing <mingjie.xing@gmail.com>
* mips.h (OP_*_OFFSET_A, OP_*_OFFSET_B, OP_*_OFFSET_C)
(OP_*_RZ, OP_*_FZ, INSN2_M_FP_D, INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z)
(INSN2_READ_GPR_Z, INSN2_READ_FPR_Z, INSN2_READ_GPR_D): Define.
opcodes/
2010-12-14 Mingjie Xing <mingjie.xing@gmail.com>
* mips-opc.c (WR_z, WR_Z, RD_z, RD_Z, RD_d): Define.
(mips_builtin_opcodes): Add loongson3a specific instructions.
* mips-dis.c (print_insn_args): Handle the new arguments +a|b|c|z|Z.
gas/
2010-12-14 Mingjie Xing <mingjie.xing@gmail.com>
* config/tc-mips.c (insn_uses_reg): Handle the new flags
INSN2_READ_FPR_Z, INSN2_READ_GPR_D and INSN2_READ_GPR_Z.
(append_insn): Handle delay-slot filling for the new flags.
(validate_mips_insn): Handle the new arguments +a|b|c|z|Z.
(mips_ip): Handle the new arguments +a|b|c|z|Z.
gas/testsuite/
2010-12-14 Mingjie Xing <mingjie.xing@gmail.com>
* gas/mips/loongson-3a-2.s, gas/mips/loongson-3a-2.d,
gas/mips/loongson-3a-3.s, gas/mips/loongson-3a-3.d: New tests.
* gas/mips/mips.exp: Run them.
|
|
* archures.c (bfd_mach_mips_loongson_3a): Defined.
* bfd-in2.h (bfd_mach_mips_loongson_3a): Defined.
* cpu-mips.c (I_loongson_3a): New add.
(arch_info_struct): Add loongson_3a.
* elfxx-mips.c (_bfd_elf_mips_mach): Add loongson_3a.
(mips_set_isa_flags): Add loongson_3a.
(mips_mach_extensions): Add loongson_3a in MIPS64 extensions.
binutils/
* readelf.c (get_machine_flags): Add loongson-3a.
gas/
* config/tc-mips.c (mips_cpu_info_table): Add loongson3a in MIPS 64.
* doc/c-mips.texi (MIPS cpu): Add loongson3a.
include/
* elf/mips.h (E_MIPS_MACH_LS3A): Defined.
* opcode/mips.h (INSN_LOONGSON_3A): Defined.
(CPU_LOONGSON_3A): Defined.
(OPCODE_IS_MEMBER): Add LOONGSON_3A.
opcodes/
* mips-dis.c (mips_arch_choices): Add loongson3a.
* mips-opc.c (IL3A): Defined as INSN_LOONGSON_3A.
(mips_builtin_opcodes): Modify some instructions' membership from
IL2F to IL2F|IL3A, since these instructions are supported by Loongson_3A.
|
|
determination.
|
|
* config/tc-mips.c (nops_for_insn_or_target): Replace
MIPS16_INSN_BRANCH with MIPS16_INSN_UNCOND_BRANCH and
MIPS16_INSN_COND_BRANCH.
include/opcode/
* mips.h (MIPS16_INSN_UNCOND_BRANCH): New macro.
(MIPS16_INSN_BRANCH): Rename to...
(MIPS16_INSN_COND_BRANCH): ... this.
opcodes/
* mips-dis.c (print_mips16_insn_arg): Remove branch instruction
type and delay slot determination.
(print_insn_mips16): Extend branch instruction type and delay
slot determination to cover all instructions.
* mips16-opc.c (BR): Remove macro.
(UBR, CBR): New macros.
(mips16_opcodes): Update branch annotation for "b", "beqz",
"bnez", "bteqz" and "btnez". Add branch annotation for "jalrc"
and "jrc".
|
|
* config/tc-mips.c (is_opcode_valid): Remove expansionp.
(macro_build): Change invocation of is_opcode_valid.
(mips_ip): Likewise.
gas/testsuite/
* gas/mips/mips-no-jalx.l: Delete.
* gas/mips/mips-no-jalx.s: Delete.
* gas/mips/mips-jalx-2.d: New.
* gas/mips/mips-jalx-2.s: New.
* gas/mips/mips.exp (mips-jalx-2): Run new test.
(mips-no-jalx): Remove deleted test.
include/
* opcode/mips.h (INSN_MIPS16): Remove.
opcodes/
* mips-dis.c (mips_arch): Remove INSN_MIPS16.
* mips-opc.c (I16): Remove.
(mips_builtin_op): Reclassify jalx.
|
|
|
|
2009-02-03 Sandip Matte <sandip@rmicorp.com>
* aoutx.h (NAME (aout, machine_type)): Handle bfd_mach_mips_xlr.
* archures.c (bfd_mach_mips_xlr): Define.
* bfd-in2.h: Regenerate.
* cpu-mips.c (I_xlr): Define.
(arch_info_struct): Add XLR entry.
* elfxx-mips.c (_bfd_elf_mips_mach): Handle E_MIPS_MACH_XLR.
(mips_set_isa_flags): Handle bfd_mach_mips_xlr
(mips_mach_extensions): Add XLR entry.
binutils:
2009-02-03 Sandip Matte <sandip@rmicorp.com>
* readelf.c (get_machine_flags): Handle E_MIPS_MACH_XLR.
gas:
2009-02-03 Sandip Matte <sandip@rmicorp.com>
* config/tc-mips.c (macro): Handle M_MSGSND, M_MSGLD, M_MSGLD_T,
M_MSGWAIT and M_MSGWAIT_T.
(mips_cpu_info_table): Add XLR entry.
* doc/c-mips.texi (-march): Document xlr.
gas/testsuite:
2009-02-03 Sandip Matte <sandip@rmicorp.com>
* gas/mips/mips.exp (xlr): New architecture.
(xlr-ext): Run test.
* gas/mips/xlr-ext.d, gas/mips/xlr-ext.s: New.
include/elf:
2009-02-03 Sandip Matte <sandip@rmicorp.com>
* mips.h (E_MIPS_MACH_XLR): Define.
include/opcode:
2009-02-03 Sandip Matte <sandip@rmicorp.com>
* mips.h (INSN_XLR): Define.
(INSN_CHIP_MASK): Update.
(CPU_XLR): Define.
(OPCODE_IS_MEMBER): Update.
(M_MSGSND, M_MSGLD, M_MSGLD_T, M_MSGWAIT, M_MSGWAIT_T): Define.
opcodes:
2009-02-03 Sandip Matte <sandip@rmicorp.com>
* mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
(mips_arch_choices): Add XLR entry.
* mips-opc.c (XLR): Define.
(mips_builtin_opcodes): Add XLR instructions.
|
