aboutsummaryrefslogtreecommitdiff
path: root/opcodes/i386-opc.h
AgeCommit message (Collapse)AuthorFilesLines
2019-07-17x86: drop stale Mem enumeratorJan Beulich1-3/+1
This was supposed to also be removed by c48dadc9a8 ('x86: drop "mem" operand type attribute'). It's odd enough that this hasn't caused build issues, considering the careful use of OTunused (apparently to avoid "missing initializer" warnings). To avoid such happening again introduce compile time consistency checks.
2019-07-16x86: make RegMem an opcode modifierJan Beulich1-7/+6
... instead of an operand type bit: It's an insn property, not an operand one. There's just one actual change to be made to the templates: Most are now required to have the (unswapped) destination go into ModR/M.rm, so VMOVD template needs its opcode adjusted accordingly and its operands swapped. {,V}MOVS{S,D}, otoh, are left alone in this regard, as otherwise generated code would differ from what we've been producing so far (which I don't think is wanted). Take the opportunity and add a missing IgnoreSize to pextrb (leading to an error in 16-bit mode), and take the liberty to once again drop stray IgnoreSize attributes from lines changed and neighboring related ones.
2019-07-16x86: fold SReg{2,3}Jan Beulich1-6/+3
They're the only exception to there generally being no mix of register kinds possible in an insn operand template, and there being two bits per operand for their representation is also quite wasteful, considering the low number of uses. Fold both bits and deal with the little bit of fallout. Also take the liberty and drop dead code trying to set REX_B: No segment register has RegRex set on it. Additionally I was quite surprised that PUSH/POP with the permitted segment registers is not covered by the test cases. Add the missing pieces.
2019-07-01x86: drop Vec_Imm4Jan Beulich1-4/+0
It is pretty wasteful to have a per-operand flag which is used in exactly 4 cases. It can be relatively easily replaced, and by doing so I've actually found some dead code to remove at the same time (there's no case of ImmExt set at the same time as Vec_Imm4).
2019-06-04Enable Intel AVX512_VP2INTERSECT insnH.J. Lu1-0/+3
This patch enables support for VP2INTERSECT in binutils. Please refer to https://software.intel.com/sites/default/files/managed/c5/15/architecture-instruction-set-extensions-programming-reference.pdf for VP2INTERSECT details. Make check-gas is ok. gas/ 2019-06-04 Igor Tsimbalist <igor.v.tsimbalist@intel.com> Lili Cui <lili.cui@intel.com> * config/tc-i386.c (cpu_arch): Add .avx512_vp2intersect. (cpu_noarch): Likewise. * doc/c-i386.texi: Document avx512_vp2intersect. * testsuite/gas/i386/i386.exp: Run vp2intersect tests. * testsuite/gas/i386/vp2intersect-intel.d: New test. * testsuite/gas/i386/vp2intersect.d: Likewise. * testsuite/gas/i386/vp2intersect.s: Likewise. * testsuite/gas/i386/vp2intersect-inval-bcast.l: Likewise. * testsuite/gas/i386/vp2intersect-inval-bcast.s: Likewise. * testsuite/gas/i386/x86-64-vp2intersect-intel.d: Likewise. * testsuite/gas/i386/x86-64-vp2intersect.d: Likewise. * testsuite/gas/i386/x86-64-vp2intersect.s: Likewise. * testsuite/gas/i386/x86-64-vp2intersect-inval-bcast.l: Likewise. * testsuite/gas/i386/x86-64-vp2intersect-inval-bcast.s: Likewise. opcodes/ 2019-06-04 Igor Tsimbalist <igor.v.tsimbalist@intel.com> Lili Cui <lili.cui@intel.com> * i386-dis.c (enum): Add PREFIX_EVEX_0F3868, EVEX_W_0F3868_P_3. * i386-dis-evex.h (evex_table): Add AVX512_VP2INTERSECT instructions. * i386-gen.c (cpu_flag_init): Add CPU_AVX512_VP2INTERSECT_FLAGS, CPU_ANY_AVX512_VP2INTERSECT_FLAGS. (cpu_flags): Add CpuAVX512_VP2INTERSECT. * i386-opc.h (enum): Add CpuAVX512_VP2INTERSECT. (i386_cpu_flags): Add cpuavx512_vp2intersect. * i386-opc.tbl: Add AVX512_VP2INTERSECT insns. * i386-init.h: Regenerated. * i386-tbl.h: Likewise.
2019-06-04Add support for Intel ENQCMD[S] instructionsH.J. Lu1-0/+3
This patch enables support for ENQCMD[S] in binutils. Please refer to https://software.intel.com/sites/default/files/managed/c5/15/architecture-instruction-set-extensions-programming-reference.pdf for ENQCMD[S] details. Make check-gas is ok. gas/ChangeLog: 2019-06-04 Xuepeng Guo <xuepeng.guo@intel.com> Lili Cui <lili.cui@intel.com> * doc/c-i386.texi: Document enqcmd. * testsuite/gas/i386/enqcmd-intel.d: New file. * testsuite/gas/i386/enqcmd-inval.l: Likewise. * testsuite/gas/i386/enqcmd-inval.s: Likewise. * testsuite/gas/i386/enqcmd.d: Likewise. * testsuite/gas/i386/enqcmd.s: Likewise. * testsuite/gas/i386/x86-64-enqcmd-intel.d: Likewise. * testsuite/gas/i386/x86-64-enqcmd-inval.l: Likewise. * testsuite/gas/i386/x86-64-enqcmd-inval.s: Likewise. * testsuite/gas/i386/x86-64-enqcmd.d: Likewise. * testsuite/gas/i386/x86-64-enqcmd.s: Likewise. * testsuite/gas/i386/i386.exp: Run enqcmd-intel, enqcmd-inval, enqcmd, x86-64-enqcmd-intel, x86-64-enqcmd-inval, and x86-64-enqcmd. opcodes/ChangeLog: 2019-06-04 Xuepeng Guo <xuepeng.guo@intel.com> Lili Cui <lili.cui@intel.com> * i386-dis.c (enum): Add MOD_0F38F8_PREFIX_1 and MOD_0F38F8_PREFIX_3. (prefix_table): New instructions (see prefix above). (mod_table): New instructions (see prefix above). * i386-gen.c (cpu_flag_init): Add entries for enqcmd. (cpu_flags): Add a bitfield for enqmcd. * i386-init.h: Regenerated. * i386-opc.h (enum): Add CpuENQCMD. (i386_cpu_flags): Add a bitfield for cpuenqcmd. * i386-opc.tbl: Add enqcmd and enqcmds instructions. * i386-init.h: Regenerated. * i386-tbl.h: Regenerated.
2019-04-05x86: Support Intel AVX512 BF16Xuepeng Guo1-0/+3
Add assembler and disassembler support Intel AVX512 BF16: https://software.intel.com/en-us/download/intel-architecture-instruction-set-extensions-programming-reference gas/ 2019-04-05 Xuepeng Guo <xuepeng.guo@intel.com> * config/tc-i386.c (cpu_arch): Add .avx512_bf16. (cpu_noarch): Add noavx512_bf16. * doc/c-i386.texi: Document avx512_bf16. * testsuite/gas/i386/avx512_bf16.d: New file. * testsuite/gas/i386/avx512_bf16.s: Likewise. * testsuite/gas/i386/avx512_bf16_vl-inval.l: Likewise. * testsuite/gas/i386/avx512_bf16_vl-inval.s: Likewise. * testsuite/gas/i386/avx512_bf16_vl.d: Likewise. * testsuite/gas/i386/avx512_bf16_vl.s: Likewise. * testsuite/gas/i386/x86-64-avx512_bf16.d: Likewise. * testsuite/gas/i386/x86-64-avx512_bf16.s: Likewise. * testsuite/gas/i386/x86-64-avx512_bf16_vl-inval.l: Likesie. * testsuite/gas/i386/x86-64-avx512_bf16_vl-inval.s: Likewise. * testsuite/gas/i386/x86-64-avx512_bf16_vl.d: Likewise. * testsuite/gas/i386/x86-64-avx512_bf16_vl.s: Likewise. * testsuite/gas/i386/i386.exp: Add BF16 related tests. opcodes/ 2019-04-05 Xuepeng Guo <xuepeng.guo@intel.com> * i386-dis-evex.h (evex_table): Updated to support BF16 instructions. * i386-dis.c (enum): Add EVEX_W_0F3852_P_1, EVEX_W_0F3872_P_1 and EVEX_W_0F3872_P_3. * i386-gen.c (cpu_flag_init): Add CPU_AVX512_BF16_FLAGS. (cpu_flags): Add bitfield for CpuAVX512_BF16. * i386-opc.h (enum): Add CpuAVX512_BF16. (i386_cpu_flags): Add bitfield for cpuavx512_bf16. * i386-opc.tbl: Add AVX512 BF16 instructions. * i386-init.h: Regenerated. * i386-tbl.h: Likewise.
2019-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2018-10-10x86: fold Size{16,32,64} template attributesJan Beulich1-6/+5
Only one of them can be set at a time, which means they can be expressed by a single 2-bit field instead of three 1-bit ones.
2018-09-14x86: Support VEX/EVEX WIG encodingH.J. Lu1-0/+2
Add VEXWIG, defined as 3, to indicate that the VEX.W/EVEX.W bit is ignored by such VEX/EVEX instructions, aka WIG instructions. Set VexW=3 on VEX/EVEX WIG instructions. Update assembler to check VEXWIG when setting the VEX.W bit. gas/ PR gas/23642 * config/tc-i386.c (build_vex_prefix): Check VEXWIG when setting the VEX.W bit. (build_evex_prefix): Check VEXWIG when setting the EVEX.W bit. opcodes/ PR gas/23642 * i386-opc.h (VEXWIG): New. * i386-opc.tbl: Set VexW=3 on VEX/EVEX WIG instructions. * i386-tbl.h: Regenerated.
2018-09-13x86: use D attribute also for SIMD templatesJan Beulich1-0/+2
Various moves come in load and store forms, and just like on the GPR and FPU sides there would better be only one pattern. In some cases this is not feasible because the opcodes are too different, but quite a few cases follow a similar standard scheme. Introduce Opcode_SIMD_FloatD and Opcode_SIMD_IntD, generalize handling in operand_size_match() (reverse operand handling there simply needs to match "straight" operand one), and fix a long standing, but so far only latent bug with when to zap found_reverse_match. Also once again drop IgnoreSize where pointlessly applied to templates touched anyway as well as *word when redundant with Reg*.
2018-08-11x86: Add CpuCMOV and CpuFXSRH.J. Lu1-0/+6
There are separate CPUID feature bits for fxsave/fxrstor and cmovCC instructions. This patch adds CpuCMOV and CpuFXSR to replace Cpu686 on corresponding instructions. gas/ * config/tc-i386.c (cpu_arch): Add .cmov and .fxsr. (cpu_noarch): Add nocmov and nofxsr. * doc/c-i386.texi: Document cmov and fxsr. opcodes/ * i386-gen.c (cpu_flag_init): Add CpuCMOV and CpuFXSR to CPU_I686_FLAGS. Add CPU_CMOV_FLAGS, CPU_FXSR_FLAGS, CPU_ANY_CMOV_FLAGS and CPU_ANY_FXSR_FLAGS. (cpu_flags): Add CpuCMOV and CpuFXSR. * i386-opc.tbl: Replace Cpu686 with CpuFXSR on fxsave, fxsave64, fxrstor and fxrstor64. Replace Cpu686 with CpuCMOV on cmovCC. * i386-init.h: Regenerated. * i386-tbl.h: Likewise.
2018-08-06x86: fold RegEip/RegRip and RegEiz/RegRizJan Beulich1-4/+2
This allows to simplify the code in a number of places.
2018-08-03x86: drop "mem" operand type attributeJan Beulich1-1/+0
No template specifies this bit, so there's no point recording it in the templates. Use a flags[] bit instead.
2018-07-31x86: fold various AVX512 templates with so far differing Masking attributesJan Beulich1-2/+2
There's no insn allowing ZEROING_MASKING alone. Re-purpose its value for handling the not uncommon case of insns allowing either form of masking with register operands, but only merging masking with a memory operand.
2018-07-31x86: drop CpuVREXJan Beulich1-3/+0
It is fully redundant with CpuAVX512F.
2018-07-25x86: Expand Broadcast to 3 bitsH.J. Lu1-1/+12
Expand Broadcast to 3 bits so that the number of bytes to broadcast can be computed as 1 << (Broadcast - 1). Use it to simplify x86 assembler. gas/ * config/tc-i386.c (Broadcast_Operation): Add bytes. (build_evex_prefix): Use i.broadcast->bytes. (match_broadcast_size): New function. (check_VecOperands): Use the broadcast field to compute the number of bytes to broadcast directly. Set i.broadcast->bytes. Use match_broadcast_size. opcodes/ * i386-gen.c (adjust_broadcast_modifier): New function. (process_i386_opcode_modifier): Add an argument for operands. Adjust the Broadcast value based on operands. (output_i386_opcode): Pass operand_types to process_i386_opcode_modifier. (process_i386_opcodes): Pass NULL as operands to process_i386_opcode_modifier. * i386-opc.h (BYTE_BROADCAST): New. (WORD_BROADCAST): Likewise. (DWORD_BROADCAST): Likewise. (QWORD_BROADCAST): Likewise. (i386_opcode_modifier): Expand broadcast to 3 bits. * i386-tbl.h: Regenerated.
2018-07-19x86: fold various AVX512VL templates into their AVX512F counterpartsJan Beulich1-1/+2
2018-07-18x86: Split vcvtps2{,u}qq and vcvttps2{,u}qqH.J. Lu1-9/+9
After commit 1b54b8d7e4fc8055f9220a5287e8a94d8a65a88d Author: Jan Beulich <jbeulich@novell.com> Date: Mon Dec 18 09:36:14 2017 +0100 x86: fold RegXMM/RegYMM/RegZMM into RegSIMD ... qualified by their respective sizes, allowing to drop FirstXmm0 at the same time. folded RegXMM, RegYMM and RegZMM into RegSIMD, it's no longer impossible to distinguish if Xmmword can represent a memory reference when operand specification contains SIMD register. For example, template operands specification like these RegXMM|...|Xmmword|... and RegXMM|... The Xmmword bitfield is always set by RegXMM which is represented by "RegSIMD|Xmmword". This patch splits each of vcvtps2qq, vcvtps2uqq, vcvttps2qq and vcvttps2uqq into 2 templates: one template only has RegXMM source operand and the other only has mempry source operand. gas/ PR gas/23418 * testsuite/gas/i386/xmmword.s: Add tests for vcvtps2qq, vcvtps2uqq, vcvttps2qq and vcvttps2uqq. * testsuite/gas/i386/xmmword.l: Updated. opcodes/ PR gas/23418 * i386-opc.h (Byte): Update comments. (Word): Likewise. (Dword): Likewise. (Fword): Likewise. (Qword): Likewise. (Tbyte): Likewise. (Xmmword): Likewise. (Ymmword): Likewise. (Zmmword): Likewise. * i386-opc.tbl: Split vcvtps2qq, vcvtps2uqq, vcvttps2qq and vcvttps2uqq. * i386-tbl.h: Regenerated.
2018-07-11x86: replace off-by-one OTMaxJan Beulich1-4/+4
With its name it should equal to the largest prior enumerator, which is not very helpful as that will change every once in a while. Rename it to OTNum instead to make name and value match, and correct use sites to no longer use one too large a value.
2018-05-07Enable Intel MOVDIRI, MOVDIR64B instructionsH.J. Lu1-0/+6
gas/ * config/tc-i386.c (cpu_arch): Add .movdir, .movdir64b. (cpu_noarch): Likewise. (process_suffix): Add check for register size. * doc/c-i386.texi: Document movdiri, movdir64b. * testsuite/gas/i386/i386.exp: Run MOVDIR{I,64B} tests. * testsuite/gas/i386/movdir-intel.d: New file. * testsuite/gas/i386/movdir.d: Likewise. * testsuite/gas/i386/movdir.s: Likewise. * testsuite/gas/i386/movdir64b-reg.s: Likewise. * testsuite/gas/i386/movdir64b-reg.l: Likewise. * testsuite/gas/i386/x86-64-movdir-intel.d: Likewise. * testsuite/gas/i386/x86-64-movdir.d: Likewise. * testsuite/gas/i386/x86-64-movdir.s: Likewise. * testsuite/gas/i386/x86-64-movdir64b-reg.s: Likewise. * testsuite/gas/i386/x86-64-movdir64b-reg.l: Likewise. opcodes/ * i386-dis.c (Gva): New. (enum): Add PREFIX_0F38F8, PREFIX_0F38F9, MOD_0F38F8_PREFIX_2, MOD_0F38F9_PREFIX_0. (prefix_table): New instructions (see prefix above). (mod_table): New instructions (see prefix above). (OP_G): Handle va_mode. * i386-gen.c (cpu_flag_init): Add CPU_MOVDIRI_FLAGS, CPU_MOVDIR64B_FLAGS. (cpu_flags): Add CpuMOVDIRI and CpuMOVDIR64B. * i386-opc.h (enum): Add CpuMOVDIRI, CpuMOVDIR64B. (i386_cpu_flags): Add cpumovdiri and cpumovdir64b. * i386-opc.tbl: Add movidir{i,64b}. * i386-init.h: Regenerated. * i386-tbl.h: Likewise.
2018-05-07x86: Replace AddrPrefixOp0 with AddrPrefixOpRegH.J. Lu1-3/+3
This patch replaces AddrPrefixOp0 with AddrPrefixOpReg to indicate that the size of register operand is controlled by the address size prefix. This will be used by Intel MOVDIRI and MOVDIR64B instructions later. gas/ * config/tc-i386.c (process_suffix): Check addrprefixopreg instead of addrprefixop0. opcodes/ * i386-gen.c (opcode_modifiers): Replace AddrPrefixOp0 with AddrPrefixOpReg. * i386-opc.h (AddrPrefixOp0): Renamed to ... (AddrPrefixOpReg): This. (i386_opcode_modifier): Rename addrprefixop0 to addrprefixopreg. * i386-opc.tbl: Replace AddrPrefixOp0 with AddrPrefixOpReg.
2018-04-27Revert "Enable Intel MOVDIRI, MOVDIR64B instructions."Igor Tsimbalist1-24/+0
This reverts commit a914a7c95895161c99533d5919b8504b37ea54a0.
2018-04-26Enable Intel MOVDIRI, MOVDIR64B instructions.Igor Tsimbalist1-0/+24
gas/ * config/tc-i386.c (cpu_arch): Add .movdir, .movdir64b. (cpu_noarch): Likewise. (process_suffix): Add check for register size. * doc/c-i386.texi: Document movdiri, movdir64b. * testsuite/gas/i386/i386.exp: Run MOVDIR{I,64B} tests. * testsuite/gas/i386/movdir-intel.d: New test. * testsuite/gas/i386/movdir.d: Likewise. * testsuite/gas/i386/movdir.s: Likewise. * testsuite/gas/i386/movdir64b-reg.s: Likewise. * testsuite/gas/i386/movdir64b-reg.l: Likewise. * testsuite/gas/i386/x86-64-movdir-intel.d: Likewise. * testsuite/gas/i386/x86-64-movdir.d: Likewise. * testsuite/gas/i386/x86-64-movdir.s: Likewise. * testsuite/gas/i386/x86-64-movdir64b-reg.s: Likewise. * testsuite/gas/i386/x86-64-movdir64b-reg.l: Likewise. opcodes/ * i386-dis.c (enum): Add PREFIX_0F38F8, PREFIX_0F38F9. (prefix_table): New instructions (see prefix above). Add Gva macro and handling in OP_G. * i386-gen.c (cpu_flag_init): Add CPU_MOVDIRI_FLAGS, CPU_MOVDIR64B_FLAGS. (cpu_flags): Likewise. (opcode_modifiers): Add AddrPrefixOpReg. (i386_opcode_modifier): Likewise. * i386-opc.h (enum): Add CpuMOVDIRI, CpuMOVDIR64B. (i386_cpu_flags): Likewise. * i386-opc.tbl: Add movidir{i,64b}. * i386-init.h: Regenerate. * i386-tbl.h: Likewise.
2018-04-26x86: drop CpuRegMMX, CpuReg[XYZ]MM, and CpuRegMaskJan Beulich1-15/+0
It's not clear to me why they had been introduced - the respective comments in opcodes/i386-gen.c are certainly wrong: ymm<N> registers are very well supported (and necessary) with just AVX512F.
2018-04-26x86: drop VexImmExtJan Beulich1-3/+0
It's only used in assertions, and hence not really needed for correct code generation.
2018-04-17Enable Intel CLDEMOTE instruction.Igor Tsimbalist1-0/+3
gas/ * config/tc-i386.c (cpu_arch): Add .cldemote. * doc/c-i386.texi: Document cldemote/.cldemote. * testsuite/gas/i386/cldemote-intel.d: New. * testsuite/gas/i386/cldemote.d: Likewise. * testsuite/gas/i386/cldemote.s: Likewise. * testsuite/gas/i386/i386.exp: Run new tests. * testsuite/gas/i386/x86-64-cldemote-intel.d: New. * testsuite/gas/i386/x86-64-cldemote.d: Likewise. * testsuite/gas/i386/x86-64-cldemote.s: Likewise. * testsuite/gas/i386/ilp32/x86-64-nops.d: Remove 0x0f1c NOP encoding that maps to cldemote. * testsuite/gas/i386/nops.d: Likewise. * testsuite/gas/i386/nops.s: Likewise. * testsuite/gas/i386/x86-64-nops.d: Likewise. * testsuite/gas/i386/x86-64-nops.s: Likewise. opcode/ * i386-dis.c: Add REG_0F1C_MOD_0, MOD_0F1C_PREFIX_0, PREFIX_0F1C. * i386-gen.c (cpu_flag_init): Add CPU_CLDEMOTE_FLAGS, (cpu_flags): Add CpuCLDEMOTE. * i386-init.h: Regenerate. * i386-opc.h (enum): Add CpuCLDEMOTE, (i386_cpu_flags): Add cpucldemote. * i386-opc.tbl: Add cldemote. * i386-tbl.h: Regenerate.
2018-04-11Enable Intel WAITPKG instructions.Igor Tsimbalist1-0/+3
Intel has disclosed a set of new instructions for Tremont processor. The spec is https://software.intel.com/en-us/intel-architecture-instruction-set-extensions-programming-reference This patch enables Intel WAITPKG instructions. gas/ * config/tc-i386.c (cpu_arch): Add WAITPKG. (cpu_noarch): Likewise. * doc/c-i386.texi: Document WAITPKG. * i386/i386.exp: Run WAITPKG tests. * testsuite/gas/i386/waitpkg-intel.d: New test. * testsuite/gas/i386/waitpkg.d: Likewise. * testsuite/gas/i386/waitpkg.s: Likewise. * testsuite/gas/i386/x86-64-waitpkg-intel.d: Likewise. * testsuite/gas/i386/x86-64-waitpkg.d: Likewise. * testsuite/gas/i386/x86-64-waitpkg.s: Likewise. opcodes/ * i386-dis.c (enum): Add PREFIX_MOD_0_0FAE_REG_6, PREFIX_MOD_1_0FAE_REG_6. (va_mode): New. (OP_E_register): Use va_mode. * i386-dis-evex.h (prefix_table): New instructions (see prefixes above). * i386-gen.c (cpu_flag_init): Add WAITPKG. (cpu_flags): Likewise. * i386-opc.h (enum): Likewise. (i386_cpu_flags): Likewise. * i386-opc.tbl: Add umonitor, umwait, tpause. * i386-init.h: Regenerate. * i386-tbl.h: Likewise.
2018-03-28x86: drop VecESizeJan Beulich1-7/+0
It again can be inferred from other information. The vpopcntd templates all need to have Dword added to their memory operands; the lack thereof was actually a bug preventing certain Intel syntax code to assemble, so test cases get extended.
2018-03-28x86: convert broadcast insn attribute to booleanJan Beulich1-11/+1
The (only) valid broadcast type for an insn can be inferred from other information.
2018-03-08x86: Remove support for old (<= 2.8.1) versions of gccH.J. Lu1-3/+0
Old (<= 2.8.1) versions of gcc generate broken fsubp, fsubrp, fdivp and fdivrp instructions. Assembler translates them to correct ones with a warning: [hjl@gnu-cfl-1 gas]$ cat x.s fsubp %st(3),%st [hjl@gnu-cfl-1 gas]$ gcc -c x.s x.s: Assembler messages: x.s:1: Warning: translating to `fsubp %st,%st(3)' [hjl@gnu-cfl-1 gas]$ This patch removes support for old (<= 2.8.1) versions of gcc: [hjl@gnu-cfl-1 gas]$ ./as-new -o x.o x.s x.s: Assembler messages: x.s:1: Error: operand type mismatch for `fsubp' [hjl@gnu-cfl-1 gas]$ gas/ * NEWS: Mention -mold-gcc removal. * config/tc-i386.c (i386_error): Remove old_gcc_only. (old_gcc): Removed. (match_template): Remove old gcc support. (OPTION_MOLD_GCC): Removed. (OPTION_MRELAX_RELOCATIONS): Updated. (md_longopts): Remove OPTION_MOLD_GCC. (md_parse_option): Likewise. (md_show_usage): Remove -mold-gcc. * testsuite/gas/i386/general.s: Convert fsub/fdiv tests for old (<= 2.8.1) versions of gcc. * testsuite/gas/i386/intel.s: Likewise. * testsuite/gas/i386/general.l: Updated. * testsuite/gas/i386/intel-intel.d: Likewise. * testsuite/gas/i386/intel.d: Likewise. * testsuite/gas/i386/intel.e: Likewise. * testsuite/gas/i386/i386.exp: Don't pass -mold-gcc to general. include/ * opcode/i386 (OLDGCC_COMPAT): Removed. opcodes/ * i386-gen.c (opcode_modifiers): Remove OldGcc. * i386-opc.h (OldGcc): Removed. (i386_opcode_modifier): Remove oldgcc. * i386-opc.tbl: Remove fsubp, fsubrp, fdivp and fdivrp instructions for old (<= 2.8.1) versions of gcc. * i386-tbl.h: Regenerated.
2018-03-08x86: fold several AVX512VL templatesJan Beulich1-0/+2
The differences between some of the register and memory forms of the same insn often don't really require the templates to be separate. For example, Disp8MemShift is simply irrelevant to register forms. Fold these as far as possible, and also fold register-only forms. Further folding is possible, but needs other prereq work done first. A note regarding EVEXDYN: This is intended to be used only when no other properties of the template would make is_evex_encoding() return true. In all "normal" cases I think it is preferable to omit this indicator, to keep the table half way readable.
2018-03-08x86: drop FloatDJan Beulich1-3/+0
It can be expressed by D, when making the consumer look at operand size to tell apart both uses.
2018-02-27x86: Add -O[2|s] assembler command-line optionsH.J. Lu1-0/+4
On x86, some instructions have alternate shorter encodings: 1. When the upper 32 bits of destination registers of andq $imm31, %r64 testq $imm31, %r64 xorq %r64, %r64 subq %r64, %r64 known to be zero, we can encode them without the REX_W bit: andl $imm31, %r32 testl $imm31, %r32 xorl %r32, %r32 subl %r32, %r32 This optimization is enabled with -O, -O2 and -Os. 2. Since 0xb0 mov with 32-bit destination registers zero-extends 32-bit immediate to 64-bit destination register, we can use it to encode 64-bit mov with 32-bit immediates. This optimization is enabled with -O, -O2 and -Os. 3. Since the upper bits of destination registers of VEX128 and EVEX128 instructions are extended to zero, if all bits of destination registers of AVX256 or AVX512 instructions are zero, we can use VEX128 or EVEX128 encoding to encode AVX256 or AVX512 instructions. When 2 source registers are identical, AVX256 and AVX512 andn and xor instructions: VOP %reg, %reg, %dest_reg can be encoded with VOP128 %reg, %reg, %dest_reg This optimization is enabled with -O2 and -Os. 4. 16-bit, 32-bit and 64-bit register tests with immediate may be encoded as 8-bit register test with immediate. This optimization is enabled with -Os. This patch does: 1. Add {nooptimize} pseudo prefix to disable instruction size optimization. 2. Add optimize to i386_opcode_modifier to tell assembler that encoding of an instruction may be optimized. gas/ PR gas/22871 * NEWS: Mention -O[2|s]. * config/tc-i386.c (_i386_insn): Add no_optimize. (optimize): New. (optimize_for_space): Likewise. (fits_in_imm7): New function. (fits_in_imm31): Likewise. (optimize_encoding): Likewise. (md_assemble): Call optimize_encoding to optimize encoding. (parse_insn): Handle {nooptimize}. (md_shortopts): Append "O::". (md_parse_option): Handle -On. * doc/c-i386.texi: Document -O0, -O, -O1, -O2 and -Os as well as {nooptimize}. * testsuite/gas/cfi/cfi-x86_64.d: Pass -O0 to assembler. * testsuite/gas/i386/ilp32/cfi/cfi-x86_64.d: Likewise. * testsuite/gas/i386/i386.exp: Run optimize-1, optimize-2, optimize-3, x86-64-optimize-1, x86-64-optimize-2, x86-64-optimize-3 and x86-64-optimize-4. * testsuite/gas/i386/optimize-1.d: New file. * testsuite/gas/i386/optimize-1.s: Likewise. * testsuite/gas/i386/optimize-2.d: Likewise. * testsuite/gas/i386/optimize-2.s: Likewise. * testsuite/gas/i386/optimize-3.d: Likewise. * testsuite/gas/i386/optimize-3.s: Likewise. * testsuite/gas/i386/x86-64-optimize-1.s: Likewise. * testsuite/gas/i386/x86-64-optimize-1.d: Likewise. * testsuite/gas/i386/x86-64-optimize-2.d: Likewise. * testsuite/gas/i386/x86-64-optimize-2.s: Likewise. * testsuite/gas/i386/x86-64-optimize-3.d: Likewise. * testsuite/gas/i386/x86-64-optimize-3.s: Likewise. * testsuite/gas/i386/x86-64-optimize-4.d: Likewise. * testsuite/gas/i386/x86-64-optimize-4.s: Likewise. opcodes/ PR gas/22871 * i386-gen.c (opcode_modifiers): Add Optimize. * i386-opc.h (Optimize): New enum. (i386_opcode_modifier): Add optimize. * i386-opc.tbl: Add "Optimize" to "mov $imm, reg", "sub reg, reg/mem", "test $imm, acc", "test $imm, reg/mem", "and $imm, acc", "and $imm, reg/mem", "xor reg, reg/mem", "movq $imm, reg" and AVX256 and AVX512 versions of vandnps, vandnpd, vpandn, vpandnd, vpandnq, vxorps, vxorpd, vpxor, vpxord and vpxorq. * i386-tbl.h: Regenerated.
2018-01-23Enable Intel PCONFIG instruction.Igor Tsimbalist1-0/+3
Intel has disclosed a set of new instructions for Icelake processor. The spec is https://software.intel.com/sites/default/files/managed/c5/15/architecture-instruction-set-extensions-programming-reference.pdf This patch enables Intel PCONFIG instruction. gas/ * config/tc-i386.c (cpu_arch): Add .pconfig. * doc/c-i386.texi: Document .pconfig. * testsuite/gas/i386/i386.exp: Add PCONFIG tests. * testsuite/gas/i386/pconfig-intel.d: New test. * testsuite/gas/i386/pconfig.d: Likewise. * testsuite/gas/i386/pconfig.s: Likewise. * testsuite/gas/i386/x86-64-pconfig-intel.d: Likewise. * testsuite/gas/i386/x86-64-pconfig.d: Likewise. * testsuite/gas/i386/x86-64-pconfig.s: Likewise. opcodes/ * i386-dis.c (enum): Add pconfig. * i386-gen.c (cpu_flag_init): Add CPU_PCONFIG_FLAGS. (cpu_flags): Add CpuPCONFIG. * i386-opc.h (enum): Add CpuPCONFIG. (i386_cpu_flags): Add cpupconfig. * i386-opc.tbl: Add PCONFIG instruction. * i386-init.h: Regenerate. * i386-tbl.h: Likewise.
2018-01-23Enable Intel WBNOINVD instruction.Igor Tsimbalist1-0/+3
Intel has disclosed a set of new instructions for Icelake processor. The spec is https://software.intel.com/sites/default/files/managed/c5/15/architecture-instruction-set-extensions-programming-reference.pdf This patch enables Intel WBNOINVD instruction. gas/ * config/tc-i386.c (cpu_arch): Add .wbnoinvd. * doc/c-i386.texi: Document .wbnoinvd. * testsuite/gas/i386/i386.exp: Add WBNOINVD tests. * testsuite/gas/i386/wbnoinvd-intel.d: New test. * testsuite/gas/i386/wbnoinvd.d: Likewise. * testsuite/gas/i386/wbnoinvd.s: Likewise. * testsuite/gas/i386/x86-64-wbnoinvd-intel.d: Likewise. * testsuite/gas/i386/x86-64-wbnoinvd.d: Likewise. * testsuite/gas/i386/x86-64-wbnoinvd.s: Likewise. opcodes/ * i386-dis.c (enum): Add PREFIX_0F09. * i386-gen.c (cpu_flag_init): Add CPU_WBNOINVD_FLAGS. (cpu_flags): Add CpuWBNOINVD. * i386-opc.h (enum): Add CpuWBNOINVD. (i386_cpu_flags): Add cpuwbnoinvd. * i386-opc.tbl: Add WBNOINVD instruction. * i386-init.h: Regenerate. * i386-tbl.h: Likewise.
2018-01-17Replace CET bit with IBT and SHSTK bits.Igor Tsimbalist1-3/+5
The latest specification for Intel CET technology defined two new bits instead of previously used CET bit. These are IBT and SHSTK bits. The patch replaces CET bit with IBT and SHSTK bits. gas/ * config/tc-i386.c (cpu_arch): Delete .cet. Add .ibt, .shstk. (cpu_noarch): Add noibt, noshstk. (parse_insn): Change cpucet to cpuibt. * doc/c-i386.texi: Delete .cet. Add .ibt, .shstk. * testsuite/gas/i386/cet-ibt-inval.l: New test. * testsuite/gas/i386/cet-ibt-inval.s: Likewise. * testsuite/gas/i386/cet-shstk-inval.l: Likewise. * testsuite/gas/i386/cet-shstk-inval.s: Likewise. * testsuite/gas/i386/x86-64-cet-ibt-inval.l: Likewise. * testsuite/gas/i386/x86-64-cet-ibt-inval.s: Likewise. * testsuite/gas/i386/x86-64-cet-shstk-inval.l: Likewise. * testsuite/gas/i386/x86-64-cet-shstk-inval.s: Likewise. opcodes/ * i386-gen.c (cpu_flag_init): Delete CPU_CET_FLAGS, CpuCET. Add CPU_IBT_FLAGS, CPU_SHSTK_FLAGS, CPY_ANY_IBT_FLAGS, CPU_ANY_SHSTK_FLAGS, CpuIBT, CpuSHSTK. (cpu_flags): Add CpuIBT, CpuSHSTK. * i386-opc.h (enum): Add CpuIBT, CpuSHSTK. (i386_cpu_flags): Add cpuibt, cpushstk. * i386-opc.tbl: Change CpuCET to CpuSHSTK and CpuIBT. * i386-init.h: Regenerate. * i386-tbl.h: Likewise.
2018-01-03Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2017-12-18x86: fold certain AVX and AVX2 templatesJan Beulich1-1/+1
Just like for instructions in GPRs, there's no need to have separate templates for otherwise identical insns acting on XMM or YMM registers (or memory of the same size).
2017-12-18x86: fold RegXMM/RegYMM/RegZMM into RegSIMDJan Beulich1-13/+4
... qualified by their respective sizes, allowing to drop FirstXmm0 at the same time.
2017-12-18x86: drop FloatReg and FloatAccJan Beulich1-7/+1
Express them as Reg|Tbyte and Acc|Tbyte respectively.
2017-12-18x86: replace Reg8, Reg16, Reg32, and Reg64Jan Beulich1-12/+3
Use a combination of a single new Reg bit and Byte, Word, Dword, or Qword instead. Besides shrinking the number of operand type bits this has the benefit of making register handling more similar to accumulator handling (a generic flag is being accompanied by a "size qualifier"). It requires, however, to split a few insn templates, as it is no longer correct to have combinations like Reg32|Reg64|Byte. This slight growth in size will hopefully be outweighed by this change paving the road for folding a presumably much larger number of templates later on.
2017-11-30x86: drop Vec_Disp8Jan Beulich1-4/+0
This is fully redundant with Disp8MemShift being non-zero, and hence can be folded with normal Disp8 handling.
2017-10-23Enable Intel AVX512_BITALG instructions.Igor Tsimbalist1-0/+3
Intel has disclosed a set of new instructions. The spec is https://software.intel.com/sites/default/files/managed/c5/15/architecture-instruction-set-extensions-programming-reference.pdf gas/ * config/tc-i386.c (cpu_arch): Add .avx512_bitalg. (cpu_noarch): noavx512_bitalg. * doc/c-i386.texi: Document .avx512_bitalg, noavx512_bitalg. * testsuite/gas/i386/i386.exp: Add AVX512_BITALG tests. * testsuite/gas/i386/avx512f_bitalg-intel.d: New test. * testsuite/gas/i386/avx512f_bitalg.d: Likewise. * testsuite/gas/i386/avx512f_bitalg.s: Likewise. * testsuite/gas/i386/avx512vl_bitalg-intel.d: Likewise. * testsuite/gas/i386/avx512vl_bitalg.d: Likewise. * testsuite/gas/i386/avx512vl_bitalg.s: Likewise. * testsuite/gas/i386/x86-64-avx512f_bitalg-intel.d: Likewise. * testsuite/gas/i386/x86-64-avx512f_bitalg.d: Likewise. * testsuite/gas/i386/x86-64-avx512f_bitalg.s: Likewise. * testsuite/gas/i386/x86-64-avx512vl_bitalg-intel.d: Likewise. * testsuite/gas/i386/x86-64-avx512vl_bitalg.d: Likewise. * testsuite/gas/i386/x86-64-avx512vl_bitalg.s: Likewise. opcodes/ * i386-dis.c (enum): Add PREFIX_EVEX_0F3854, PREFIX_EVEX_0F388F. (enum): Add EVEX_W_0F3854_P_2. * i386-dis-evex.h (evex_table): Updated. * i386-gen.c (cpu_flag_init): Add CPU_AVX512_BITALG, CPU_ANY_AVX512_BITALG_FLAGS. Update CPU_ANY_AVX512F_FLAGS. (cpu_flags): Add CpuAVX512_BITALG. * i386-opc.h (enum): Add CpuAVX512_BITALG. (i386_cpu_flags): Add cpuavx512_bitalg.. * i386-opc.tbl: Add Intel AVX512_BITALG instructions. * i386-init.h: Regenerate. * i386-tbl.h: Likewise.
2017-10-23Enable Intel AVX512_VNNI instructions.Igor Tsimbalist1-1/+4
Intel has disclosed a set of new instructions. The spec is https://software.intel.com/sites/default/files/managed/c5/15/architecture-instruction-set-extensions-programming-reference.pdf gas/ * config/tc-i386.c (cpu_arch): Add .avx512_vnni. (cpu_noarch): Add noavx512_vnni. * doc/c-i386.texi: Document .avx512_vnni. * testsuite/gas/i386/i386.exp: Add AVX512_VNNI tests. * testsuite/gas/i386/avx512vnni-intel.d: New test. * testsuite/gas/i386/avx512vnni.d: Likewise. * testsuite/gas/i386/avx512vnni.s: Likewise. * testsuite/gas/i386/avx512vnni_vl-intel.d: Likewise. * testsuite/gas/i386/avx512vnni_vl.d: Likewise. * testsuite/gas/i386/avx512vnni_vl.s: Likewise. * testsuite/gas/i386/x86-64-avx512vnni-intel.d: Likewise. * testsuite/gas/i386/x86-64-avx512vnni.d: Likewise. * testsuite/gas/i386/x86-64-avx512vnni.s: Likewise. * testsuite/gas/i386/x86-64-avx512vnni_vl-intel.d: Likewise. * testsuite/gas/i386/x86-64-avx512vnni_vl.d: Likewise. * testsuite/gas/i386/x86-64-avx512vnni_vl.s: Likewise. opcodes/ * i386-dis.c (enum): Add PREFIX_EVEX_0F3850, PREFIX_EVEX_0F3851. * i386-dis-evex.h (evex_table): Updated. * i386-gen.c (cpu_flag_init): Add CPU_AVX512_VNNI, CPU_ANY_AVX512_VNNI_FLAGS. Update CPU_ANY_AVX512F_FLAGS. (cpu_flags): Add CpuAVX512_VNNI. * i386-opc.h (enum): Add CpuAVX512_VNNI. (i386_cpu_flags): Add cpuavx512_vnni. * i386-opc.tbl Add Intel AVX512_VNNI instructions. * i386-init.h: Regenerate. * i386-tbl.h: Likewise.
2017-10-23Enable Intel VPCLMULQDQ instruction.Igor Tsimbalist1-1/+4
Intel has disclosed a set of new instructions. The spec is https://software.intel.com/sites/default/files/managed/c5/15/architecture-instruction-set-extensions-programming-reference.pdf gas/ * config/tc-i386.c (cpu_arch): Add VPCLMULQDQ. * doc/c-i386.texi: Document VPCLMULQDQ. * testsuite/gas/i386/i386.exp: Run VPCLMULQDQ tests. * testsuite/gas/i386/avx512f_vpclmulqdq-intel.d: New test. * testsuite/gas/i386/avx512f_vpclmulqdq-wig.s: Ditto. * testsuite/gas/i386/avx512f_vpclmulqdq-wig1-intel.d: Ditto. * testsuite/gas/i386/avx512f_vpclmulqdq-wig1.d: Ditto. * testsuite/gas/i386/avx512f_vpclmulqdq.d: Ditto. * testsuite/gas/i386/avx512f_vpclmulqdq.s: Ditto. * testsuite/gas/i386/avx512vl_vpclmulqdq-intel.d: Ditto. * testsuite/gas/i386/avx512vl_vpclmulqdq-wig.s: Ditto. * testsuite/gas/i386/avx512vl_vpclmulqdq-wig1-intel.d: Ditto. * testsuite/gas/i386/avx512vl_vpclmulqdq-wig1.d: Ditto. * testsuite/gas/i386/avx512vl_vpclmulqdq.d: Ditto. * testsuite/gas/i386/avx512vl_vpclmulqdq.s: Ditto. * testsuite/gas/i386/vpclmulqdq-intel.d: Ditto. * testsuite/gas/i386/vpclmulqdq.d: Ditto. * testsuite/gas/i386/vpclmulqdq.s: Ditto. * testsuite/gas/i386/x86-64-avx512f_vpclmulqdq-intel.d: Ditto. * testsuite/gas/i386/x86-64-avx512f_vpclmulqdq-wig.s: Ditto. * testsuite/gas/i386/x86-64-avx512f_vpclmulqdq-wig1-intel.d: Ditto. * testsuite/gas/i386/x86-64-avx512f_vpclmulqdq-wig1.d: Ditto. * testsuite/gas/i386/x86-64-avx512f_vpclmulqdq.d: Ditto. * testsuite/gas/i386/x86-64-avx512f_vpclmulqdq.s: Ditto. * testsuite/gas/i386/x86-64-avx512vl_vpclmulqdq-intel.d: Ditto. * testsuite/gas/i386/x86-64-avx512vl_vpclmulqdq-wig.s: Ditto. * testsuite/gas/i386/x86-64-avx512vl_vpclmulqdq-wig1-intel.d: Ditto. * testsuite/gas/i386/x86-64-avx512vl_vpclmulqdq-wig1.d: Ditto. * testsuite/gas/i386/x86-64-avx512vl_vpclmulqdq.d: Ditto. * testsuite/gas/i386/x86-64-avx512vl_vpclmulqdq.s: Ditto. * testsuite/gas/i386/x86-64-vpclmulqdq-intel.d: Ditto. * testsuite/gas/i386/x86-64-vpclmulqdq.d: Ditto. * testsuite/gas/i386/x86-64-vpclmulqdq.s: Ditto. opcodes/ * i386-dis.c (enum): Add PREFIX_EVEX_0F3A44. (enum): Remove VEX_LEN_0F3A44_P_2. (vex_len_table): Ditto. (enum): Remove VEX_W_0F3A44_P_2. (vew_w_table): Ditto. (prefix_table): Adjust instructions (see prefixes above). * i386-dis-evex.h (evex_table): Add new instructions (see prefixes above). * i386-gen.c (cpu_flag_init): Add VPCLMULQDQ. (bitfield_cpu_flags): Ditto. * i386-opc.h (enum): Ditto. (i386_cpu_flags): Ditto. (CpuUnused): Comment out to avoid zero-width field problem. * i386-opc.tbl (vpclmulqdq): New instruction. * i386-init.h: Regenerate. * i386-tbl.h: Ditto.
2017-10-23Enable Intel VAES instructions.Igor Tsimbalist1-0/+3
Intel has disclosed a set of new instructions. The spec is https://software.intel.com/sites/default/files/managed/c5/15/architecture-instruction-set-extensions-programming-reference.pdf gas/ * config/tc-i386.c (cpu_arch): Add VAES. * doc/c-i386.texi: Document VAES. * testsuite/gas/i386/i386.exp: Run VAES tests. * testsuite/gas/i386/avx512f_vaes-intel.d: New test. * testsuite/gas/i386/avx512f_vaes-wig.s: Ditto. * testsuite/gas/i386/avx512f_vaes-wig1-intel.d: Ditto. * testsuite/gas/i386/avx512f_vaes-wig1.d: Ditto. * testsuite/gas/i386/avx512f_vaes.d: Ditto. * testsuite/gas/i386/avx512f_vaes.s: Ditto. * testsuite/gas/i386/avx512vl_vaes-intel.d: Ditto. * testsuite/gas/i386/avx512vl_vaes-wig.s: Ditto. * testsuite/gas/i386/avx512vl_vaes-wig1-intel.d: Ditto. * testsuite/gas/i386/avx512vl_vaes-wig1.d: Ditto. * testsuite/gas/i386/avx512vl_vaes.d: Ditto. * testsuite/gas/i386/avx512vl_vaes.s: Ditto. * testsuite/gas/i386/vaes-intel.d: Ditto. * testsuite/gas/i386/vaes.d: Ditto. * testsuite/gas/i386/vaes.s: Ditto. * testsuite/gas/i386/x86-64-avx512f_vaes-intel.d: Ditto. * testsuite/gas/i386/x86-64-avx512f_vaes-wig.s: Ditto. * testsuite/gas/i386/x86-64-avx512f_vaes-wig1-intel.d: Ditto. * testsuite/gas/i386/x86-64-avx512f_vaes-wig1.d: Ditto. * testsuite/gas/i386/x86-64-avx512f_vaes.d: Ditto. * testsuite/gas/i386/x86-64-avx512f_vaes.s: Ditto. * testsuite/gas/i386/x86-64-avx512vl_vaes-intel.d: Ditto. * testsuite/gas/i386/x86-64-avx512vl_vaes-wig.s: Ditto. * testsuite/gas/i386/x86-64-avx512vl_vaes-wig1-intel.d: Ditto. * testsuite/gas/i386/x86-64-avx512vl_vaes-wig1.d: Ditto. * testsuite/gas/i386/x86-64-avx512vl_vaes.d: Ditto. * testsuite/gas/i386/x86-64-avx512vl_vaes.s: Ditto. * testsuite/gas/i386/x86-64-vaes-intel.d: Ditto. * testsuite/gas/i386/x86-64-vaes.d: Ditto. * testsuite/gas/i386/x86-64-vaes.s: Ditto. opcodes/ * i386-dis.c (enum): Add PREFIX_EVEX_0F38DC, PREFIX_EVEX_0F38DD, PREFIX_EVEX_0F38DE, PREFIX_EVEX_0F38DF. (enum): Remove VEX_LEN_0F38DC_P_2, VEX_LEN_0F38DD_P_2, VEX_LEN_0F38DE_P_2, VEX_LEN_0F38DF_P_2. (vex_len_table): Ditto. (enum): Remove VEX_W_0F38DC_P_2, VEX_W_0F38DD_P_2, VEX_W_0F38DE_P_2, VEX_W_0F38DF_P_2. (vew_w_table): Ditto. (prefix_table): Adjust instructions (see prefixes above). * i386-dis-evex.h (evex_table): Add new instructions (see prefixes above). * i386-gen.c (cpu_flag_init): Add VAES. (bitfield_cpu_flags): Ditto. * i386-opc.h (enum): Ditto. (i386_cpu_flags): Ditto. * i386-opc.tbl (vaes{enc,dec}{last,}): New instructions. * i386-init.h: Regenerate. * i386-tbl.h: Ditto.
2017-10-23Enable Intel GFNI instructions.Igor Tsimbalist1-2/+3
Intel has disclosed a set of new instructions. The spec is https://software.intel.com/sites/default/files/managed/c5/15/architecture-instruction-set-extensions-programming-reference.pdf gas/ * config/tc-i386.c (cpu_arch): Add .gfni. * doc/c-i386.texi: Document .gfni. * testsuite/gas/i386/i386.exp: Add GFNI tests. * testsuite/gas/i386/avx.s: New GFNI test. * testsuite/gas/i386/x86-64-avx.s: Likewise. * testsuite/gas/i386/avx.d: Adjust. * testsuite/gas/i386/avx-intel.d: Likewise * testsuite/gas/i386/ilp32/x86-64-avx-intel.d: Likewise. * testsuite/gas/i386/ilp32/x86-64-avx.d: Likewise. * testsuite/gas/i386/avx512f_gfni-intel.d: New test. * testsuite/gas/i386/avx512f_gfni.d: Likewise. * testsuite/gas/i386/avx512f_gfni.s: Likewise. * testsuite/gas/i386/avx512vl_gfni-intel.d: Likewise. * testsuite/gas/i386/avx512vl_gfni.d: Likewise. * testsuite/gas/i386/avx512vl_gfni.s: Likewise. * testsuite/gas/i386/gfni-intel.d: Likewise. * testsuite/gas/i386/gfni.d: Likewise. * testsuite/gas/i386/gfni.s: Likewise. * testsuite/gas/i386/x86-64-avx512f_gfni-intel.d: Likewise. * testsuite/gas/i386/x86-64-avx512f_gfni.d: Likewise. * testsuite/gas/i386/x86-64-avx512f_gfni.s: Likewise. * testsuite/gas/i386/x86-64-avx512vl_gfni-intel.d: Likewise. * testsuite/gas/i386/x86-64-avx512vl_gfni.d: Likewise. * testsuite/gas/i386/x86-64-avx512vl_gfni.s: Likewise. * testsuite/gas/i386/x86-64-avx_gfni-intel.d: Likewise. * testsuite/gas/i386/x86-64-avx_gfni.d: Likewise. * testsuite/gas/i386/x86-64-avx_gfni.s: Likewise. * testsuite/gas/i386/x86-64-gfni-intel.d: Likewise. * testsuite/gas/i386/x86-64-gfni.d: Likewise. * testsuite/gas/i386/x86-64-gfni.s: Likewise. opcodes/ * i386-dis.c (enum): Add PREFIX_0F38CF, PREFIX_0F3ACE, PREFIX_0F3ACF, PREFIX_VEX_0F38CF, PREFIX_VEX_0F3ACE, PREFIX_VEX_0F3ACF, PREFIX_EVEX_0F38CF, PREFIX_EVEX_0F3ACE, PREFIX_EVEX_0F3ACF. (enum): Add VEX_W_0F38CF_P_2, VEX_W_0F3ACE_P_2, VEX_W_0F3ACF_P_2, EVEX_W_0F3ACE_P_2, EVEX_W_0F3ACF_P_2. (prefix_table): Updated (see prefixes above). (three_byte_table): Likewise. (vex_w_table): Likewise. * i386-dis-evex.h: Likewise. * i386-gen.c (cpu_flag_init): Add CPU_GFNI_FLAGS, CpuGFNI. (cpu_flags): Add CpuGFNI. * i386-opc.h (enum): Add CpuGFNI. (i386_cpu_flags): Add cpugfni. * i386-opc.tbl: Add Intel GFNI instructions. * i386-init.h: Regenerate. * i386-tbl.h: Likewise.
2017-10-23Enable Intel AVX512_VBMI2 instructions.Igor Tsimbalist1-2/+5
Intel has disclosed a set of new instructions. The spec is https://software.intel.com/sites/default/files/managed/c5/15/architecture-instruction-set-extensions-programming-reference.pdf gas/ * config/tc-i386.c (cpu_arch): Add .avx512_vbmi2. (cpu_noarch): noavx512_vbmi2. * doc/c-i386.texi: Document .avx512_vbmi2, noavx512_vbmi2. * testsuite/gas/i386/i386.exp: Add AVX512_VBMI2 tests. * testsuite/gas/i386/avx512vbmi2-intel.d: New test. * testsuite/gas/i386/avx512vbmi2.d: Likewise. * testsuite/gas/i386/avx512vbmi2.s: Likewise. * testsuite/gas/i386/avx512vbmi2_vl-intel.d: Likewise. * testsuite/gas/i386/avx512vbmi2_vl.d: Likewise. * testsuite/gas/i386/avx512vbmi2_vl.s: Likewise. * testsuite/gas/i386/x86-64-avx512vbmi2-intel.d: Likewise. * testsuite/gas/i386/x86-64-avx512vbmi2.d: Likewise. * testsuite/gas/i386/x86-64-avx512vbmi2.s: Likewise. * testsuite/gas/i386/x86-64-avx512vbmi2_vl-intel.d: Likewise. * testsuite/gas/i386/x86-64-avx512vbmi2_vl.d: Likewise. * testsuite/gas/i386/x86-64-avx512vbmi2_vl.s: Likewise. opcodes/ * i386-dis.c (enum): Add b_scalar_mode, w_scalar_mode. Define EXbScalar and EXwScalar for OP_EX. (enum): Add PREFIX_EVEX_0F3862, PREFIX_EVEX_0F3863, PREFIX_EVEX_0F3870, PREFIX_EVEX_0F3871, PREFIX_EVEX_0F3872, PREFIX_EVEX_0F3873, PREFIX_EVEX_0F3A70, PREFIX_EVEX_0F3A71, PREFIX_EVEX_0F3A72, PREFIX_EVEX_0F3A73. (enum): Add EVEX_W_0F3862_P_2, EVEX_W_0F3863_P_2, EVEX_W_0F3870_P_2, EVEX_W_0F3871_P_2, EVEX_W_0F3872_P_2, EVEX_W_0F3873_P_2, EVEX_W_0F3A70_P_2, EVEX_W_0F3A71_P_2, EVEX_W_0F3A72_P_2, EVEX_W_0F3A73_P_2. (intel_operand_size): Handle b_scalar_mode and w_scalar_mode. (OP_E_memory): Likewise. * i386-dis-evex.h: Updated. * i386-gen.c (cpu_flag_init): Add CPU_AVX512_VBMI2, CPU_ANY_AVX512_VBMI2_FLAGS. Update CPU_ANY_AVX512F_FLAGS. (cpu_flags): Add CpuAVX512_VBMI2. * i386-opc.h (enum): Add CpuAVX512_VBMI2. (i386_cpu_flags): Add cpuavx512_vbmi2. * i386-opc.tbl: Add Intel AVX512_VBMI2 instructions. * i386-init.h: Regenerate. * i386-tbl.h: Likewise.
2017-05-22x86: Add NOTRACK prefix supportH.J. Lu1-0/+3
For register indirect branches, NOTRACK prefix (0x3e), which is also the DS segment register prefix, can be used to ignore the CET indirect branch track. gas/ * config/tc-i386.c (REX_PREFIX): Changed to 7. (NOTRACK_PREFIX): New. (MAX_PREFIXES): Changed to 8. (_i386_insn): Add notrack_prefix. (PREFIX_GROUP): Add PREFIX_DS. (add_prefix): Return PREFIX_DS for DS_PREFIX_OPCODE. (md_assemble): Check if NOTRACK prefix is supported. (parse_insn): Set notrack_prefix and issue an error for other prefixes after NOTRACK prefix. * testsuite/gas/i386/i386.exp: Run tests for NOTRACK prefix. * testsuite/gas/i386/notrack-intel.d: New file. * testsuite/gas/i386/notrack.d: Likewise. * testsuite/gas/i386/notrack.s: Likewise. * testsuite/gas/i386/notrackbad.l: Likewise. * testsuite/gas/i386/notrackbad.s: Likewise. * testsuite/gas/i386/x86-64-notrack-intel.d: Likewise. * testsuite/gas/i386/x86-64-notrack.d: Likewise. * testsuite/gas/i386/x86-64-notrack.s: Likewise. * testsuite/gas/i386/x86-64-notrackbad.l: Likewise. * testsuite/gas/i386/x86-64-notrackbad.s: Likewise. include/ * include/opcode/i386.h (NOTRACK_PREFIX_OPCODE): New. opcodes/ * i386-dis.c (NOTRACK_Fixup): New. (NOTRACK): Likewise. (NOTRACK_PREFIX): Likewise. (last_active_prefix): Likewise. (reg_table): Use NOTRACK on indirect call and jmp. (ckprefix): Set last_active_prefix. (prefix_name): Return "notrack" for NOTRACK_PREFIX. * i386-gen.c (opcode_modifiers): Add NoTrackPrefixOk. * i386-opc.h (NoTrackPrefixOk): New. (i386_opcode_modifier): Add notrackprefixok. * i386-opc.tbl: Add NoTrackPrefixOk to indirect call and jmp. Add notrack. * i386-tbl.h: Regenerated.
generated by cgit v1.1 at 2024-11-21 21:23:30 +0000