aboutsummaryrefslogtreecommitdiff
path: root/opcodes/arm-dis.c
AgeCommit message (Collapse)AuthorFilesLines
2019-05-16[PATCH 37/57][Arm][OBJDUMP] Add framework for MVE instructionsAndre Vieira1-4/+258
opcodes/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> Michael Collison <michael.collison@arm.com> * arm-dis.c (enum mve_instructions): New enum. (enum mve_unpredictable): Likewise. (enum mve_undefined): Likewise. (struct mopcode32): New struct. (is_mve_okay_in_it): New function. (is_mve_architecture): Likewise. (arm_decode_field): Likewise. (arm_decode_field_multiple): Likewise. (is_mve_encoding_conflict): Likewise. (is_mve_undefined): Likewise. (is_mve_unpredictable): Likewise. (print_mve_undefined): Likewise. (print_mve_unpredictable): Likewise. (print_insn_coprocessor_1): Use arm_decode_field_multiple. (print_insn_mve): New function. (print_insn_thumb32): Handle MVE architecture. (select_arm_features): Force thumb for Armv8.1-m Mainline.
2019-04-15[binutils, ARM, 16/16] Add support to VLDR and VSTR of system registersAndre Vieira1-1/+51
GNU as' Arm backend assumes each mnemonic has a single entry in the instruction table but VLDR (system register) and VSTR (system register) are different instructions than VLDR and VSTR. It is thus necessary to add some form of demultiplexing in the parser. It starts by creating a new operand type OP_VLDR which indicate that the operand is either the existing OP_RVSD operand or a system register. The function parse_operands () then tries these two cases in order, calling the new parse_sys_vldr_vstr for the second case. Since the encoding function is specified in the instruction table entry, it also need to have some sort of demultiplexing. This is done in do_vldr_vstr which either calls the existing do_neon_ldr_str () or calls the new do_t_vldr_vstr_sysreg (). A new internal relocation is needed as well since the offset has a shorter range than in other Thumb coprocessor instructions. Disassembly also requires special care since VSTR (system register) reuse the STC encoding with the coprocessor number 15. Armv8.1-M Mainline ARM manual states that coprocessor 8, 14 and 15 are reserved for floating-point and MVE instructions a feature bit check is added if the coprocessor number is one of this value and we are trying to match a coprocessor instruction (eg. STC) to forbid the match. ChangeLog entries are as follows: *** bfd/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * reloc.c (BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM): New internal relocation. * bfd-in2.h: Regenerate. * libbfd.h: Likewise. *** gas/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * config/tc-arm.c (parse_sys_vldr_vstr): New function. (OP_VLDR): New enum operand_parse_code enumerator. (parse_operands): Add logic for OP_VLDR. (do_t_vldr_vstr_sysreg): New function. (do_vldr_vstr): Likewise. (insns): Guard VLDR and VSTR by arm_ext_v4t for Thumb mode. (md_apply_fix): Add bound check for VLDR and VSTR co-processor offset. Add masking logic for BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM relocation. * testsuite/gas/arm/archv8m_1m-cmse-main-bad.s: Add examples of bad uses of VLDR and VSTR. * testsuite/gas/arm/archv8m_1m-cmse-main-bad.l: Add error messages for above bad uses. * testsuite/gas/arm/archv8m_1m-cmse-main.s: Add examples of VLDR and VSTR valid uses. * testsuite/gas/arm/archv8m_1m-cmse-main.d: Add disassembly for the above examples. *** opcodes/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * arm-dis.c (coprocessor_opcodes): Document new %J and %K format specifier. Add entries for VLDR and VSTR of system registers. (print_insn_coprocessor): Forbid coprocessor numbers 8, 14 and 15 in coprocessor instructions on Armv8.1-M Mainline targets. Add handling of %J and %K format specifier.
2019-04-15[binutils, ARM, 15/16] Add support for VSCCLRMAndre Vieira1-0/+32
Like for CLRM, this patch aims to share as much logic with the similar looking VLDM/VSTM. This is achieved by adding 2 new enumerator values in enum reg_list_els for the single-precision and double-precision variants of VSCCLRM and extending parse_vfp_reg_list () to deal with these types. These behave like the existing REGLIST_VFP_S and REGLIST_VFP_D types with extra logic to expect VPR as the last element in the register list. The function is algo augmented with a new partial_match parameter to indicate if any register other than VPR had already been parsed in the register list so as to not try parsing the second variant if that's the case and return the right error message. The rest of the patch is the usual encoding function, new disassembler table entries and format specifier and parsing, encoding and disassembling tests. It is worth mentioning that the new entry in the disassembler table was added in the coprocessor-related table despite VSCCLRM always being available even in FPU-less configurations. The main reason for this is that VSCCLRM also match VLDMIA entry and must thus be tried first but coprocessor entries are tried before T32 entries. It also makes sense because it is in the same encoding space as coprocessor and VFP instructions and is thus the natural place for someone to look for this instruction. Note: Both variants of VSCCLRM support D16-D31 registers but Armv8.1-M Mainline overall does not. I have thus decided not to implement support for these registers in order to keep the code simpler. It can always be added later if needed. ChangeLog entries are as follows: *** gas/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * config/tc-arm.c (arm_typed_reg_parse): Fix typo in comment. (enum reg_list_els): New REGLIST_VFP_S_VPR and REGLIST_VFP_D_VPR enumerators. (parse_vfp_reg_list): Add new partial_match parameter. Set *partial_match to TRUE if at least one element in the register list has matched. Add support for REGLIST_VFP_S_VPR and REGLIST_VFP_D_VPR register lists which expect VPR as last element in the list. (s_arm_unwind_save_vfp_armv6): Adapt call to parse_vfp_reg_list to new prototype. (s_arm_unwind_save_vfp): Likewise. (enum operand_parse_code): New OP_VRSDVLST enumerator. (parse_operands): Adapt call to parse_vfp_reg_list to new prototype. Handle new OP_VRSDVLST case. (do_t_vscclrm): New function. (insns): New entry for VSCCLRM instruction. * testsuite/gas/arm/archv8m_1m-cmse-main-bad.s: Add invalid VSCCLRM instructions. * testsuite/gas/arm/archv8m_1m-cmse-main-bad.l: Add error expectations for above instructions. * testsuite/gas/arm/archv8m_1m-cmse-main.s: Add tests for VSCCLRM instruction. * testsuite/gas/arm/archv8m_1m-cmse-main.d: Add expected disassembly for above instructions. *** opcodes/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * arm-dis.c (coprocessor_opcodes): Document new %C format control code. Add new entries for VSCCLRM instruction. (print_insn_coprocessor): Handle new %C format control code.
2019-04-15[opcodes, ARM, 14/16] Add mode availability to coprocessor table entriesAndre Vieira1-413/+434
The coprocessor_opcodes table is used both to share commonalities in coprocessor-related instructions and to avoid duplication between Arm and Thumb mode. However, some instructions do have differences between Arm and Thumb. For instance, vldmia allows PC as base register in Arm mode but not in Thumb mode. In that very case the distinction becomes necessary because the encoding with PC as base register is used in Thumb mode to denote a VSCCLRM. It is thus necessary to distinguish what is Arm or Thumb only from what is shared. This patch adds an extra field to the coprocessor_opcodes table entries to indicate what mode is a given instruction available in. The print_insn_coprocessor then uses that field to determine if an entry that matched the mark and value checked should be allowed to match or not given the current mode. ChangeLog entry is as follows: *** opcodes/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * arm-dis.c (enum isa): New enum. (struct sopcode32): New structure. (coprocessor_opcodes): change type of entries to struct sopcode32 and set isa field of all current entries to ANY. (print_insn_coprocessor): Change type of insn to struct sopcode32. Only match an entry if its isa field allows the current mode.
2019-04-15[binutils, ARM, 13/16] Add support for CLRMAndre Vieira1-2/+15
Given the similarity between LDM/STM and CLRM register lists, most of the changes in this patch aim at sharing code between those two sets of instruction. Sharing is achieved both in parsing and encoding of those instructions. In terms of parsing, parse_reg_list () is extended to take a type that describe what type of instruction is being parsed. The reg_list_els used for parse_vfp_reg_list () is reused for the type and that function is added an assert for the new REGLIST_CLRM and REGLIST_RN enumerators. parse_reg_list () is then taught to accept APSR and reject SP and PC when parsing for a CLRM instruction. At last, caller of parse_reg_list () is updated accordingly and logic is added for the new OP_CLRMLST operand. Encoding-wise, encode_thumb2_ldmstm () is reused to encode the variable bits of CLRM and is thus renamed encode_thumb2_multi (). A new do_io parameter is added to distinguish between LDM/STM and CLRM which guard all the LDM/STM specific code of the function. Finally objdump is told how to disassemble CLRM, again reusing the logic to print the LDM/STM register list (format specifier 'm'). Tests are also added in the form of negative tests to check parsing and encoding/disassembling tests. ChangeLog entries are as follows: *** gas/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * config/tc-arm.c (enum reg_list_els): Define earlier and add REGLIST_RN and REGLIST_CLRM enumerators. (parse_reg_list): Add etype parameter to distinguish between regular core register list and CLRM register list. Add logic to recognize CLRM register list. (parse_vfp_reg_list): Assert type is not for core register list. (s_arm_unwind_save_core): Update call to parse_reg_list to new prototype. (enum operand_parse_code): Declare OP_CLRMLST enumerator. (parse_operands): Update call to parse_reg_list to new prototype. Add logic for OP_CLRMLST. (encode_thumb2_ldmstm): Rename into ... (encode_thumb2_multi): This. Add do_io parameter. Add logic to encode CLRM and guard LDM/STM only code by do_io. (do_t_ldmstm): Adapt to use encode_thumb2_multi. (do_t_push_pop): Likewise. (do_t_clrm): New function. (insns): Define CLRM. * testsuite/gas/arm/archv8m_1m-cmse-main-bad.d: New file. * testsuite/gas/arm/archv8m_1m-cmse-main-bad.l: Likewise. * testsuite/gas/arm/archv8m_1m-cmse-main-bad.s: Likewise. * testsuite/gas/arm/archv8m_1m-cmse-main.d: Likewise. * testsuite/gas/arm/archv8m_1m-cmse-main.s: Likewise. *** opcodes/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * arm-dis.c (thumb_opcodes): Document %n control code. Add entry for CLRM. (print_insn_thumb32): Add logic to print %n CLRM register list.
2019-04-15[binutils, ARM, 12/16] Scalar Low Overhead loop instructions for Armv8.1-M ↵Andre Vieira1-0/+37
Mainline s patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils. This patch adds support to the Scalar low overhead loop instructions: LE WLS DLS We also add a new assembler resolvable relocation bfd_reloc_code_real enum for the 12-bit branch offset used in these instructions. ChangeLog entries are as follows: *** bfd/ChnageLog *** 2019-04-12 Sudakshina Das <sudi.das@arm.com> * reloc.c (BFD_RELOC_ARM_THUMB_LOOP12): New. * bfd-in2.h: Regenerated. * libbfd.h: Regenerated. *** gas/ChangeLog *** 2019-04-12 Sudakshina Das <sudi.das@arm.com> Andre Vieira <andre.simoesdiasvieira@arm.com> * config/tc-arm.c (operand_parse_code): Add OP_LR and OP_oLR for the LR operand and optional LR operand. (parse_operands): Add switch cases for OP_LR and OP_oLR for both type checking and value checking. (encode_thumb32_addr_mode): New entries for DLS, WLS and LE. (v8_1_loop_reloc): New helper function for handling labels for the low overhead loop instructions. (do_t_loloop): New function to encode DLS, WLS and LE. (insns): New entries for WLS, DLS and LE. (md_pcrel_from_section): New switch case for BFD_RELOC_ARM_THUMB_LOOP12. (md_appdy_fix): Likewise. (tc_gen_reloc): Likewise. * testsuite/gas/arm/armv8_1-m-tloop.s: New. * testsuite/gas/arm/armv8_1-m-tloop.d: New. * testsuite/gas/arm/armv8_1-m-tloop-bad.s: New. * testsuite/gas/arm/armv8_1-m-tloop-bad.d: New. * testsuite/gas/arm/armv8_1-m-tloop-bad.l: New. *** opcodes/ChangeLog *** 2019-04-12 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (print_insn_thumb32): Updated to accept new %P and %Q patterns.
2019-04-15[binutils, ARM, 11/16] New BFCSEL instruction for Armv8.1-M MainlineAndre Vieira1-0/+8
s patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils. This patch adds the BFCSEL instruction. It also adds a local relocation with a new bfd_reloc_code_real enum. ChangeLog entries are as follows: 2019-04-15 Sudakshina Das <sudi.das@arm.com> * reloc.c (BFD_RELOC_THUMB_PCREL_BFCSEL): New relocation. * bfd-in2.h: Regenerated. * libbfd.h: Likewise. *** gas/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> Andre Vieira <andre.simoesdiasvieira@arm.com> * config/tc-arm.c (T16_32_TAB): New entriy for bfcsel. (do_t_v8_1_branch): New switch case for bfcsel. (toU): Define. (insns): New instruction for bfcsel. (md_pcrel_from_section): New switch case for BFD_RELOC_THUMB_PCREL_BFCSEL. (md_appdy_fix): Likewise (tc_gen_reloc): Likewise. * testsuite/gas/arm/armv8_1-m-bfcsel.d: New. * testsuite/gas/arm/armv8_1-m-bfcsel.s: New. *** ld/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * testsuite/ld-arm/bfcsel.s: New. * testsuite/ld-arm/bfcsel.d: New. * testsuite/ld-arm/arm-elf.exp: Add above test. *** opcodes/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (thumb32_opcodes): New instruction bfcsel. (print_insn_thumb32): Edit the switch case for %Z.
2019-04-15[binutils, ARM, 10/16] BFCSEL infrastructure with new global reloc ↵Andre Vieira1-0/+18
R_ARM_THM_BF12 This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils. This adds infrastructure for the BFCSEL instructions which is one of the first instructions in Arm that have more than one relocations in them. This adds a new relocation R_ARM_THM_BF12. The inconsistency between external R_ARM_THM_BF12 and internal BFD_RELOC_ARM_THUMB_BF13 is because internally we count the static bit-0 of the immediate and we don't externally. ChangeLog entries are as follows : ChangeLog entries are as follows : *** bfd/ChnageLog *** 2019-04-04 Sudakshina Das <sudi.das@arm.com> * reloc.c (BFD_RELOC_ARM_THUMB_BF13): New. * bfd-in2.h: Regenerated. * libbfd.h: Regenerated. * elf32-arm.c (elf32_arm_howto_table_1): New entry for R_ARM_THM_BF13. (elf32_arm_reloc_map elf32_arm_reloc_map): Map BFD_RELOC_ARM_THUMB_BF13 and R_ARM_THM_BF12 together. (elf32_arm_final_link_relocate): New switch case for R_ARM_THM_BF13. *** elfcpp/ChangeLog *** 2019-04-04 Sudakshina Das <sudi.das@arm.com> * arm.h (R_ARM_THM_BF12): New relocation code. *** gas/ChangeLog *** 2019-04-04 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (md_pcrel_from_section): New switch case for BFD_RELOC_ARM_THUMB_BF13. (md_appdy_fix): Likewise. (tc_gen_reloc): Likewise. *** include/ChangeLog *** 2019-04-04 Sudakshina Das <sudi.das@arm.com> * elf/arm.h (START_RELOC_NUMBERS): New entry for R_ARM_THM_BF12. *** opcodes/ChangeLog *** 2019-04-04 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (print_insn_thumb32): Updated to accept new %Z pattern.
2019-04-15[binutils, ARM, 9/16] New BFL instruction for Armv8.1-M MainlineAndre Vieira1-0/+2
This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils. This patch adds the BFL instruction. *** gas/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> Andre Vieira <andre.simoesdiasvieira@arm.com> * config/tc-arm.c (T16_32_TAB): New entrie for bfl. (do_t_v8_1_branch): New switch case for bfl. (insns): New instruction for bfl. * testsuite/gas/arm/armv8_1-m-bfl.d: New. * testsuite/gas/arm/armv8_1-m-bfl.s: New. * testsuite/gas/arm/armv8_1-m-bfl-bad.s: New. * testsuite/gas/arm/armv8_1-m-bfl-bad.d: New. * testsuite/gas/arm/armv8_1-m-bfl-bad.l: New. * testsuite/gas/arm/armv8_1-m-bfl-rel.d: New. * testsuite/gas/arm/armv8_1-m-bfl-rel.s: New. *** ld/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * testsuite/ld-arm/bfl.s: New. * testsuite/ld-arm/bfl.d: New. * testsuite/ld-arm/arm-elf.exp: Add above test. *** opcodes/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (thumb32_opcodes): New instruction bfl.
2019-04-15[binutils, ARM, 8/16] BFL infrastructure with new global reloc R_ARM_THM_BF18Andre Vieira1-0/+18
This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils. This adds infrastructure for the BFL instructions which is one of the first instructions in Arm that have more than one relocations in them. This adds a new relocation R_ARM_THM_BF18. The inconsistency between external R_ARM_THM_BF18 and internal BFD_RELOC_ARM_THUMB_BF19 is because internally we count the static bit-0 of the immediate and we don't externally. ChangeLog entries are as follows : *** bfd/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * reloc.c (BFD_RELOC_ARM_THUMB_BF19): New * libbfd.h: Regenerated. * bfd-in2.h: Regenerated. * bfd-elf32-arm.c (elf32_arm_howto_table_1): New entry for R_ARM_THM_BF18. (elf32_arm_reloc_map elf32_arm_reloc_map): Map BFD_RELOC_ARM_THUMB_BF19 and R_ARM_THM_BF18 together. (elf32_arm_final_link_relocate): New switch case for R_ARM_THM_BF19. *** elfcpp/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm.h (R_ARM_THM_BF18): New relocation code. *** gas/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (md_pcrel_from_section): New switch case for BFD_RELOC_ARM_THUMB_BF19. (md_appdy_fix): Likewise. (tc_gen_reloc): Likewise. *** include/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * elf/arm.h (START_RELOC_NUMBERS): New entry for R_ARM_THM_BF18. *** opcodes/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (print_insn_thumb32): Updated to accept new %Y pattern.
2019-04-15[binutils, ARM, 7/16] New BFX and BFLX instruction for Armv8.1-M MainlineAndre Vieira1-0/+9
This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils. This patch adds the BFX and BFLX instructions. ChangeLog entries are as follows : *** gas/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (T16_32_TAB): New entries for bfx and bflx. (do_t_v8_1_branch): New switch cases for bfx and bflx. (insns): New instruction for bfx and bflx. * testsuite/gas/arm/armv8_1-m-bf-exchange.d: New. * testsuite/gas/arm/armv8_1-m-bf-exchange.s: New. * testsuite/gas/arm/armv8_1-m-bf-exchange-bad.s: New * testsuite/gas/arm/armv8_1-m-bf-exchange-bad.l: New * testsuite/gas/arm/armv8_1-m-bf-exchange-bad.d: New *** opcodes/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (print_insn_thumb32): Add '%<bitfield>S' to print an Arm register with r13 and r15 unpredictable. (thumb32_opcodes): New instructions for bfx and bflx.
2019-04-15[binutils, ARM, 6/16] New BF instruction for Armv8.1-M MainlineAndre Vieira1-0/+5
This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils. This patch adds the BF instruction. ChangeLog entries are as follows: *** gas/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> Andre Vieira <andre.simoesdiasvieira@arm.com> * config/tc-arm.c (T16_32_TAB): New entries for bf. (do_t_branch_future): New. (insns): New instruction for bf. * testsuite/gas/arm/armv8_1-m-bf.d: New. * testsuite/gas/arm/armv8_1-m-bf.s: New. * testsuite/gas/arm/armv8_1-m-bf-bad.s: New. * testsuite/gas/arm/armv8_1-m-bf-bad.l: New. * testsuite/gas/arm/armv8_1-m-bf-bad.d: New. * testsuite/gas/arm/armv8_1-m-bf-rel.d: New. * testsuite/gas/arm/armv8_1-m-bf-rel.s: New. *** ld/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * testsuite/ld-arm/bf.s: New. * testsuite/ld-arm/bf.d: New. * testsuite/ld-arm/arm-elf.exp: Add above test. *** opcodes/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (thumb32_opcodes): New instructions for bf.
2019-04-15[binutils, ARM, 5/16] BF insns infrastructure with new global reloc ↵Andre Vieira1-0/+18
R_ARM_THM_BF16 This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils. This adds infrastructure for the BF instructions which is one of the first instructions in Arm that have more than one relocations in them. This is the third infrastructure patch that adds a new relocation R_ARM_THM_BF16. The inconsistency between external R_ARM_THM_BF16 and internal BFD_RELOC_ARM_THUMB_BF17 is because internally we count the static bit-0 of the immediate and we don't externally. ChangeLog entries are as follows : *** bfd/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * reloc.c (BFD_RELOC_ARM_THUMB_BF17): New enum. * bfd-in2.h: Regenerated. * libbfd.h: Regenerated. * bfd-elf32-arm.c (elf32_arm_howto_table_1): New entry for R_ARM_THM_BF16. (elf32_arm_reloc_map elf32_arm_reloc_map): Map BFD_RELOC_ARM_THUMB_BF17 and R_ARM_THM_BF16 together. (get_value_helper): New reloc helper. (elf32_arm_final_link_relocate): New switch case for R_ARM_THM_BF16. *** elfcpp/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm.h (R_ARM_THM_BF16): New relocation code. *** gas/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (md_pcrel_from_section): New switch case for BFD_RELOC_ARM_THUMB_BF17. (md_appdy_fix): Likewise. (tc_gen_reloc): Likewise. *** include/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * elf/arm.h (START_RELOC_NUMBERS): New entry for R_ARM_THM_BF16. *** opcodes/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (print_insn_thumb32): Updated to accept new %W pattern.
2019-04-15[binutils, ARM, 3/16] BF insns infrastructure with new bfd_reloc_code_real ↵Andre Vieira1-0/+8
for fallback branch This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils. This adds infrastructure for the Branch Future instructions (BF, BFX, BFL, BFLX, BFCSEL). These are the first instructions in ARM that have more than one relocations in them. This is the first infrastructure patch that adds a new bfd_reloc_code_real enum for the fallback branch offset. This is common for all such instructions and needs to be resolvable by the assembler. ChangeLog entries are as follows : *** bfd/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * reloc.c (BFD_RELOC_THUMB_PCREL_BRANCH5): New enum. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. *** gas/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (md_pcrel_from_section): New switch case for BFD_RELOC_THUMB_PCREL_BRANCH5. (v8_1_branch_value_check): New function to check branch offsets. (md_appdy_fix): New switch case for BFD_RELOC_THUMB_PCREL_BRANCH5. (tc_gen_reloc): Likewise. *** opcodes/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (print_insn_thumb32): Updated to accept new %G pattern.
2019-04-15[binutils, ARM, 1/16] Add support for Armv8.1-M Mainline CLIAndre Vieira1-0/+1
The patch is straightforward, it does the following: - support the new Tag_CPU_arch build attribute value, ie.: + declare the new value + update all the asserts forcing logic to be reviewed for new architectures + create a corresponding bfd_mach_arm_8_1M_MAIN enumerator in bfd and add mapping from Tag_CPU_arch to it + teach readelf about new Tag_CPU_arch value - declare armv8.1-m.main as a supported architecture value - define Armv8.1-M Mainline in terms of feature bits available - tell objdump mapping from bfd_mach_arm_8_1M_MAIN enumerator to feature bits available - update architecture-specific logic in gas and bfd guarded by the asserts mentioned above. - tests for all the above ChangeLog entries are as follows: *** bfd/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * archures.c (bfd_mach_arm_8_1M_MAIN): Define. * bfd-in2.h: Regenerate. * cpu-arm.c (arch_info_struct): Add entry for Armv8.1-M Mainline. * elf32-arm.c (using_thumb_only): Return true for Armv8.1-M Mainline and update assert. (using_thumb2): Likewise. (using_thumb2_bl): Update assert. (arch_has_arm_nop): Likewise. (bfd_arm_get_mach_from_attributes): Add case for Armv8.1-M Mainline. (tag_cpu_arch_combine): Add logic for Armv8.1-M Mainline merging. *** binutils/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * readelf.c (arm_attr_tag_CPU_arch): Add entry for Armv8.1-M Mainline. *** gas/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * config/tc-arm.c (cpu_arch_ver): Add entry for Armv8.1-M Mainline Tag_CPU_arch build attribute value. Reindent. (get_aeabi_cpu_arch_from_fset): Update assert. (aeabi_set_public_attributes): Update assert for Tag_DIV_use logic. * testsuite/gas/arm/attr-march-armv8_1-m.main.d: New test. *** include/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * elf/arm.h (TAG_CPU_ARCH_V8_1M_MAIN): new macro. (MAX_TAG_CPU_ARCH): Set value to above macro. * opcode/arm.h (ARM_EXT2_V8_1M_MAIN): New macro. (ARM_AEXT_V8_1M_MAIN): Likewise. (ARM_AEXT2_V8_1M_MAIN): Likewise. (ARM_ARCH_V8_1M_MAIN): Likewise. *** ld/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * testsuite/ld-arm/attr-merge-13.attr: New test. * testsuite/ld-arm/attr-merge-13a.s: New test. * testsuite/ld-arm/attr-merge-13b.s: New test. *** opcodes/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * arm-dis.c (select_arm_features): Add logic for Armv8.1-M Mainline.
2019-04-07PR24421, Wrong brackets in opcodes/arm-dis.cAlan Modra1-213/+213
PR 24421 * arm-dis.c (print_insn_coprocessor): Correct bracket placement. (print_insn_neon, print_insn_arm): Likewise.
2019-03-25Arm: Fix Arm disassembler mapping symbol search.Tamar Christina1-148/+101
Similar to the AArch64 patches the Arm disassembler has the same issues with out of order sections but also a few short comings. For one thing there are multiple code blocks to determine mapping symbols, and they all work slightly different, and neither fully correct. The first thing this patch does is centralise the mapping symbols search into one function mapping_symbol_for_insn. This function is then updated to perform a search in a similar way as AArch64. Their used to be a value has_mapping_symbols which was used to determine the default disassembly for objects that have no mapping symbols. The problem with the approach was that it was determining this value in the same loop that needed it, which is why this field could take on the states -1, 0, 1 where -1 means "don't know". However this means that until you actually find a mapping symbol or reach the end of the disassembly glob, you don't know if you did the right action or not, and if you didn't you can't correct it anymore. This is why the two jump-reloc-veneers-* testcases end up disassembling some insn as data when they shouldn't. Out of order here refers to an object file where sections are not listed in a monotonic increasing VMA order. The ELF ABI for Arm [1] specifies the following for mapping symbols: 1) A text section must always have a corresponding mapping symbol at it's start. 2) Data sections do not require any mapping symbols. 3) The range of a mapping symbol extends from the address it starts on up to the next mapping symbol (exclusive) or section end (inclusive). However there is no defined order between a symbol and it's corresponding mapping symbol in the symbol table. This means that while in general we look up for a corresponding mapping symbol, we have to make at least one check of the symbol below the address being disassembled. When disassembling different PCs within the same section, the search for mapping symbol can be cached somewhat. We know that the mapping symbol corresponding to the current PC is either the previous one used, or one at the same address as the current PC. However this optimization and mapping symbol search must stop as soon as we reach the end or start of the section. Furthermore if we're only disassembling a part of a section, the search is a allowed to search further than the current chunk, but is not allowed to search past it (The mapping symbol if there, must be at the same address, so in practice we usually stop at PC+4). lastly, since only data sections don't require a mapping symbol the default mapping type should be DATA and not INSN as previously defined, however if the binary has had all its symbols stripped than this isn't very useful. To fix this we determine the default based on the section flags. This will allow the disassembler to be more useful on stripped binaries. If there is no section than we assume you to be disassembling INSN. [1] https://developer.arm.com/docs/ihi0044/latest/elf-for-the-arm-architecture-abi-2018q4-documentation#aaelf32-table4-7 binutils/ChangeLog: * testsuite/binutils-all/arm/in-order-all.d: New test. * testsuite/binutils-all/arm/in-order.d: New test. * testsuite/binutils-all/arm/objdump.exp: Support .d tests. * testsuite/binutils-all/arm/out-of-order-all.d: New test. * testsuite/binutils-all/arm/out-of-order.T: New test. * testsuite/binutils-all/arm/out-of-order.d: New test. * testsuite/binutils-all/arm/out-of-order.s: New test. ld/ChangeLog: * testsuite/ld-arm/jump-reloc-veneers-cond-long.d: Update disassembly. * testsuite/ld-arm/jump-reloc-veneers-long.d: Update disassembly. opcodes/ChangeLog: * arm-dis.c (struct arm_private_data): Remove has_mapping_symbols. (mapping_symbol_for_insn): Implement new algorithm. (print_insn): Remove duplicate code.
2019-02-07Arm: Backport hlt to all architectures.Tamar Christina1-1/+2
The software trap instruction HLT that was introduced in Armv8-a is used as the semihosting trap instruction in AArch64. In order to allow systems configured to run AArch64 code to also run AArch32 with semihosting it was decided that AArch32 should also use HLT in the case of the "mixed mode" environment. This requires that HLT also be backported to all earlier architectures. The instruction is in the undefined encoding space earlier architectures but must trigger a semihosting trap [3]. The Arm Architectural Reference Manual [1] doesn't explicitly mention this however this is an explicit requirement in the Semihosting-v2 protocol [2]. [1] https://developer.arm.com/docs/ddi0487/latest/arm-architecture-reference-manual-armv8-for-armv8-a-architecture-profile [2] https://developer.arm.com/docs/100863/latest/the-semihosting-interface [3] https://github.com/qemu/qemu/commit/19a6e31c9d2701ef648b70ddcfc3bf64cec8c37e gas/ChangeLog: * config/tc-arm.c (insns): Redefine THUMB_VARIANT and ARM_VARIANT for hlt to armv1. * testsuite/gas/arm/armv8a-automatic-hlt.d: Update TAGs * testsuite/gas/arm/hlt.d: New test. * testsuite/gas/arm/hlt.s: New test. opcodes/ChangeLog: * arm-dis.c (arm_opcodes): Redefine hlt to armv1.
2019-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2018-12-18Include bfd_stdint.h in bfd.hAlan Modra1-0/+1
This patch adds bfd_stdint.h to bfd.h, so that BFD can use size_t where appropriate in function parameters and return values. I also tidy a few other cases where headers are included twice. bfd/ * Makefile.am (bfdinclude_HEADERS): Add bfd_stdint.h. (BFD_H_DEPS): Add include/diagnostics.h. (LOCAL_H_DEPS): Add bfd_stdint.h. * bfd-in.h: Include bfd_stdint.h. * arc-plt.h: Don't include stdint.h. * coff-rs6000.c: Likewise. * coff64-rs6000.c: Likewise. * elfxx-riscv.c: Likewise. * cache.c: Don't include bfd_stdint.h. * elf32-arm.c: Likewise. * elf32-avr.c: Likewise. * elf32-nds32.c: Likewise. * elf32-rl78.c: Likewise. * elf32-rx.c: Likewise. * elf32-wasm32.c: Likewise. * elf64-nfp.c: Likewise. * elflink.c: Likewise. * elfnn-aarch64.c: Likewise. * elfnn-ia64.c: Likewise. * elfxx-ia64.c: Likewise. * elfxx-x86.h: Likewise. * wasm-module.c: Likewise, and don't include sysdep.h twice. * elf-nacl.h: Don't include bfd.h. * mach-o.h: Likewise. * elfxx-aarch64.c: Include bfd.h and elf-bfd.h. * elfxx-aarch64.h: Don't include bfd.h, elf-bfd.h or stdint.h. * mach-o-aarch64.c: Include mach-o.h later. * mach-o-arm.c: Likewise. * mach-o-i386.c: Likewise. * mach-o-x86-64.c: Likewise. * mach-o.c: Likewise. * sysdep.h: Don't include ansidecl.h or sys/stat.h. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. opcodes/ * arm-dis.c: Include bfd.h. * aarch64-opc.c: Include bfd_stdint.h rather than stdint.h. * csky-dis.c: Likewise. * nds32-asm.c: Likewise. * riscv-dis.c: Likewise. * s12z-dis.c: Likewise. * wasm32-dis.c: Likewise.
2018-11-06[BINUTILS, ARM] Add Armv8.5-A to select_arm_features and update macros.Sudakshina Das1-5/+5
This patch addresses the following 1) Adding ARMv8.5-A in select_arm_features. 2) Updating the feature macro so that the new ARM_EXT2_* features for Armv8.5-A are moved to ARM_AEXT2_V8_5A. *** opcodes/ChangeLog *** 2018-11-06 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (select_arm_features): Update bfd_mach_arm_8 with Armv8.5-A. Remove reduntant ARM_EXT2_FP16_FML. *** include/ChangeLog *** 2018-11-06 Sudakshina Das <sudi.das@arm.com> * opcode/arm.h (ARM_ARCH_V8_5A): Move ARM_EXT2_PREDRES and ARM_EXT2_SB to ... (ARM_AEXT2_V8_5A): Here.
2018-10-19Arm: Fix disassembler crashing on -b binary when thumb file and thumb not ↵Tamar Christina1-3/+8
forced. The disassembler for Arm has some aborts in it in places it assumes can never be reached. Under normal circumstances they indeed cannot be reached because the right options are selected from the ARM attributes in the ELF file. However when disassembling with -b binary then if you do not get the options right the disassembler just aborts. This changes it so it just prints how it was trying to interpret the instruction and prints UNKNOWN instructions next to it. This way the user has an idea of what's going. gas/ChangeLog: * testsuite/gas/arm/undefined-insn-arm.d: New test. * testsuite/gas/arm/undefined-insn-thumb.d: New test. * testsuite/gas/arm/undefined-insn.s: New test. opcodes/ChangeLog: * arm-dis.c (UNKNOWN_INSTRUCTION_32BIT): Format specifier for arm mode. (UNKNOWN_INSTRUCTION_16BIT): Format specifier for thumb mode. (print_insn_arm, print_insn_thumb16, print_insn_thumb32): Use them.
2018-10-05[Arm, 2/3] Add instruction SB for AArch32Sudakshina Das1-0/+6
This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools) This patch adds the instruction SB. This instruction is retrospectively made optional for all versions of the architecture from ARMv8.0 to ARMv8.4 and is mandatory from ARMv8.5. Hence adding a new "+sb" for older archtectures. *** include/ChangeLog *** 2018-10-05 Sudakshina Das <sudi.das@arm.com> * opcode/arm.h (ARM_EXT2_SB): New. (ARM_ARCH_V8_5A): Add ARM_EXT2_SB by default. *** opcodes/ChangeLog *** 2018-10-05 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (arm_opcodes): Add sb. (thumb32_opcodes): Likewise. *** gas/ChangeLog *** 2018-10-05 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (arm_ext_sb): New. (insns): Add new sb instruction. (arm_extensions): Add "sb". * doc/c-arm.texi: Document the above. * testsuite/gas/arm/sb-bad.d: New test. * testsuite/gas/arm/sb-bad.l: New test. * testsuite/gas/arm/sb-thumb1.d: New test. * testsuite/gas/arm/sb-thumb2.d: New test. * testsuite/gas/arm/sb.s: New test. * testsuite/gas/arm/sb1.d: New test. * testsuite/gas/arm/sb2.d: New test.
2018-07-11Adds the speculation barrier instructions to the ARM assembler and disassembler.Sudakshina Das1-6/+10
See: https://developer.arm.com/support/arm-security-updates/speculative-processor-vulnerability/download-the-whitepaper opcodes * arm-dis.c (arm_opcodes): Add ssbb and pssbb and move csdb together with them. (thumb32_opcodes): Likewise. gas * config/tc-arm.c (insns): Add new ssbb and pssbb instructions. * testsuite/gas/arm/csdb.s: Add new tests for ssbb and pssbb. * testsuite/gas/arm/csdb.d: Likewise * testsuite/gas/arm/thumb2_it_bad.s: Likewise. * testsuite/gas/arm/thumb2_it_bad.l: Likewise. * testsuite/gas/arm/barrier.d: Update with ssbb. * testsuite/gas/arm/barrier-thumb.d: Likewise.
2018-07-02GDB PR tdep/8282: MIPS: Wire in `set disassembler-options'Maciej W. Rozycki1-5/+11
Implement MIPS target support for passing options to the disassembler, complementing commit 65b48a81404c ("GDB: Add support for the new set/show disassembler-options commands."). This includes options that expect an argument, so adjust the generic code and data structures used so as to handle such options. So as to give backends syntax flexibility no specific delimiter has been defined to separate options from their respective arguments, so it has to be included as the last character of the option name. Completion code however has not been adjusted and consequently option arguments cannot be completed at this time. Also the MIPS target has non-empty defaults for the options, so that ABI names for the general-purpose registers respect our `set mips abi ...' setting rather than always being determined from the ELF headers of the binary file selected. Handle these defaults as implicit options, never shown to the user and always prepended to the user-specified options, so that the latters can override the defaults. The resulting output for the MIPS target is as follows: (gdb) show disassembler-options The current disassembler options are '' The following disassembler options are supported for use with the 'set disassembler-options <option>[,<option>...]' command: no-aliases Use canonical instruction forms. msa Recognize MSA instructions. virt Recognize the virtualization ASE instructions. xpa Recognize the eXtended Physical Address (XPA) ASE instructions. ginv Recognize the Global INValidate (GINV) ASE instructions. gpr-names=ABI Print GPR names according to specified ABI. Default: based on binary being disassembled. fpr-names=ABI Print FPR names according to specified ABI. Default: numeric. cp0-names=ARCH Print CP0 register names according to specified architecture. Default: based on binary being disassembled. hwr-names=ARCH Print HWR names according to specified architecture. Default: based on binary being disassembled. reg-names=ABI Print GPR and FPR names according to specified ABI. reg-names=ARCH Print CP0 register and HWR names according to specified architecture. For the options above, the following values are supported for "ABI": numeric 32 n32 64 For the options above, the following values are supported for "ARCH": numeric r3000 r3900 r4000 r4010 vr4100 vr4111 vr4120 r4300 r4400 r4600 r4650 r5000 vr5400 vr5500 r5900 r6000 rm7000 rm9000 r8000 r10000 r12000 r14000 r16000 mips5 mips32 mips32r2 mips32r3 mips32r5 mips32r6 mips64 mips64r2 mips64r3 mips64r5 mips64r6 interaptiv-mr2 sb1 loongson2e loongson2f loongson3a octeon octeon+ octeon2 octeon3 xlr xlp (gdb) which corresponds to what `objdump --help' used to print for the MIPS target, with minor formatting changes, most notably option argument lists being wrapped, but also the amount of white space separating options from the respective descriptions. The relevant part the new code is now also used by `objdump --help', which means these formatting changes apply to both outputs, except for argument list wrapping, which is GDB-specific. This also adds a separating new line between the heading and option lists where descriptions are provided, hence: (gdb) set architecture s390:31-bit (gdb) show disassembler-options The current disassembler options are '' The following disassembler options are supported for use with the 'set disassembler-options <option>[,<option>...]' command: esa Disassemble in ESA architecture mode zarch Disassemble in z/Architecture mode insnlength Print unknown instructions according to length from first two bits (gdb) but: (gdb) set architecture powerpc:common (gdb) show disassembler-options The current disassembler options are '' The following disassembler options are supported for use with the 'set disassembler-options <option>[,<option>...]' command: 403, 405, 440, 464, 476, 601, 603, 604, 620, 7400, 7410, 7450, 7455, 750cl, 821, 850, 860, a2, altivec, any, booke, booke32, cell, com, e200z4, e300, e500, e500mc, e500mc64, e5500, e6500, e500x2, efs, efs2, power4, power5, power6, power7, power8, power9, ppc, ppc32, 32, ppc64, 64, ppc64bridge, ppcps, pwr, pwr2, pwr4, pwr5, pwr5x, pwr6, pwr7, pwr8, pwr9, pwrx, raw, spe, spe2, titan, vle, vsx (gdb) Existing affected target backends have been adjusted accordingly. This has been verified manually with: (gdb) set architecture arm (gdb) set architecture powerpc:common (gdb) set architecture s390:31-bit to cause no issues with the `show disassembler-options' and `set disassembler-options' commands. A test case for the MIPS target has also been provided, covering the default settings with ABI overrides as well as disassembler option overrides. 2018-07-02 Maciej W. Rozycki <macro@mips.com> Simon Marchi <simon.marchi@polymtl.ca> include/ PR tdep/8282 * dis-asm.h (disasm_option_arg_t): New typedef. (disasm_options_and_args_t): Likewise. (disasm_options_t): Add `arg' member, document members. (disassembler_options_mips): New prototype. (disassembler_options_arm, disassembler_options_powerpc) (disassembler_options_s390): Update prototypes. opcodes/ PR tdep/8282 * mips-dis.c (mips_option_arg_t): New enumeration. (mips_options): New variable. (disassembler_options_mips): New function. (print_mips_disassembler_options): Reimplement in terms of `disassembler_options_mips'. * arm-dis.c (disassembler_options_arm): Adapt to using the `disasm_options_and_args_t' structure. * ppc-dis.c (disassembler_options_powerpc): Likewise. * s390-dis.c (disassembler_options_s390): Likewise. gdb/ PR tdep/8282 * disasm.h (gdb_disassembler): Add `m_disassembler_options_holder'. member * disasm.c (get_all_disassembler_options): New function. (gdb_disassembler::gdb_disassembler): Use it. (gdb_buffered_insn_length_init_dis): Likewise. (gdb_buffered_insn_length): Adjust accordingly. (set_disassembler_options): Handle options with arguments. (show_disassembler_options_sfunc): Likewise. Add a leading new line if showing options with descriptions. (disassembler_options_completer): Adapt to using the `disasm_options_and_args_t' structure. * mips-tdep.c (mips_disassembler_options): New variable. (mips_disassembler_options_o32): Likewise. (mips_disassembler_options_n32): Likewise. (mips_disassembler_options_n64): Likewise. (gdb_print_insn_mips): Don't set `disassembler_options'. (gdb_print_insn_mips_n32, gdb_print_insn_mips_n64): Remove functions. (mips_gdbarch_init): Always set `gdbarch_print_insn' to `gdb_print_insn_mips'. Set `gdbarch_disassembler_options', `gdbarch_disassembler_options_implicit' and `gdbarch_valid_disassembler_options'. * arm-tdep.c (_initialize_arm_tdep): Adapt to using the `disasm_options_and_args_t' structure. * gdbarch.sh (disassembler_options_implicit): New `gdbarch' method. (valid_disassembler_options): Switch from `disasm_options_t' to the `disasm_options_and_args_t' structure. * NEWS: Document `set disassembler-options' support for the MIPS target. * gdbarch.h: Regenerate. * gdbarch.c: Regenerate. gdb/doc/ PR tdep/8282 * gdb.texinfo (Source and Machine Code): Document `set disassembler-options' support for the MIPS target. gdb/testsuite/ PR tdep/8282 * gdb.arch/mips-disassembler-options.exp: New test. * gdb.arch/mips-disassembler-options.s: New test source.
2018-07-02[ARM] Update bfd's Tag_CPU_arch knowledgeThomas Preud'homme1-21/+50
BFD's bfd_get_mach () function returns a bfd specific value representing the architecture of the target which is populated from the Tag_CPU_arch build attribute value of that target. Among other users of that interfacem, objdump which uses it to print the architecture version of the binary being examinated and to decide what instruction is available if run with "-m arm" via its own mapping from bfd_mach_arm_X values to feature bits available. However, both BFD and objdump's most recent known architecture is Armv5TE. When encountering a newer architecture bfd_get_mach will return bfd_mach_arm_unknown. This is unfortunate since objdump uses that value to allow all instructions on all architectures which is already what it does by default, making the "-m arm" trick useless. This patch updates BFD and objdump's knowledge of Arm architecture versions up to the latest Armv8-M Baseline and Mainline, Armv8-R and Armv8.4-A architectures. Since several architecture versions (eg. 8.X-A) share the same Tag_CPU_arch build attribute value and bfd_mach_arm values, the mapping from bfd machine value to feature bits need to return the most featureful feature bits that would yield the given bfd machine value otherwise some instruction would not disassemble under "-m arm" mode. The patch rework that mapping to make this clearer and simplify writing the mapping rules. In particular, for simplicity all FPU instructions are allowed in all cases. Finally, the patch also rewrite the cpu_arch_ver table in GAS to use the TAG_CPU_ARCH_X macros rather than hardcode their value. 2018-07-02 Thomas Preud'homme <thomas.preudhomme@arm.com> bfd/ * archures.c (bfd_mach_arm_5TEJ, bfd_mach_arm_6, bfd_mach_arm_6KZ, bfd_mach_arm_6T2, bfd_mach_arm_6K, bfd_mach_arm_7, bfd_mach_arm_6M, bfd_mach_arm_6SM, bfd_mach_arm_7EM, bfd_mach_arm_8, bfd_mach_arm_8R, bfd_mach_arm_8M_BASE, bfd_mach_arm_8M_MAIN): Define. * bfd-in2.h: Regenerate. * cpu-arm.c (arch_info_struct): Add entries for above new bfd_mach_arm values. * elf32-arm.c (bfd_arm_get_mach_from_attributes): Add Tag_CPU_arch to bfd_mach_arm mapping logic for pre Armv4 and Armv5TEJ and later architectures. Force assert failure for any new Tag_CPU_arch value. gas/ * config/tc-arm.c (cpu_arch_ver): Use symbolic TAG_CPU_ARCH macros rather than hardcode their values. ld/ * arm-dis.c (select_arm_features): Fix typo in heading comment. Allow all FPU features and add mapping from new bfd_mach_arm values to allowed CPU feature bits. opcodes/ * testsuite/ld-arm/tls-descrelax-be8.d: Add architecture version in expected result. * testsuite/ld-arm/tls-descrelax-v7.d: Likewise. * testsuite/ld-arm/tls-longplt-lib.d: Likewise. * testsuite/ld-arm/tls-longplt.d: Likewise.
2018-03-03opcodes error messagesAlan Modra1-2/+5
Another patch aimed at making binutils comply with the GNU coding standard. The generated files require https://sourceware.org/ml/cgen/2018-q1/msg00004.html cpu/ * frv.opc: Include opintl.h. (add_next_to_vliw): Use opcodes_error_handler to print error. Standardize error message. (fr500_check_insn_major_constraints, frv_vliw_add_insn): Likewise. opcodes/ * sysdep.h (opcodes_error_handler): Define. (_bfd_error_handler): Declare. * Makefile.am: Remove stray #. * opc2c.c (main): Remove bogus -l arg handling. Print "DO NOT EDIT" comment. * aarch64-dis.c, * arc-dis.c, * arm-dis.c, * avr-dis.c, * d30v-dis.c, * h8300-dis.c, * mmix-dis.c, * ppc-dis.c, * riscv-dis.c, * s390-dis.c, * sparc-dis.c, * v850-dis.c: Use opcodes_error_handler to print errors. Standardize error messages. * msp430-decode.opc, * nios2-dis.c, * rl78-decode.opc: Likewise, and include opintl.h. * nds32-asm.c: Likewise, and include sysdep.h and opintl.h. * i386-gen.c: Standardize error messages. * msp430-decode.c, * rl78-decode.c, rx-decode.c: Regenerate. * Makefile.in: Regenerate. * epiphany-asm.c, * epiphany-desc.c, * epiphany-dis.c, * epiphany-ibld.c, * fr30-asm.c, * fr30-desc.c, * fr30-dis.c, * fr30-ibld.c, * frv-asm.c, * frv-desc.c, * frv-dis.c, * frv-ibld.c, * frv-opc.c, * ip2k-asm.c, * ip2k-desc.c, * ip2k-dis.c, * ip2k-ibld.c, * iq2000-asm.c, * iq2000-desc.c, * iq2000-dis.c, * iq2000-ibld.c, * lm32-asm.c, * lm32-desc.c, * lm32-dis.c, * lm32-ibld.c, * m32c-asm.c, * m32c-desc.c, * m32c-dis.c, * m32c-ibld.c, * m32r-asm.c, * m32r-desc.c, * m32r-dis.c, * m32r-ibld.c, * mep-asm.c, * mep-desc.c, * mep-dis.c, * mep-ibld.c, * mt-asm.c, * mt-desc.c, * mt-dis.c, * mt-ibld.c, * or1k-asm.c, * or1k-desc.c, * or1k-dis.c, * or1k-ibld.c, * xc16x-asm.c, * xc16x-desc.c, * xc16x-dis.c, * xc16x-ibld.c, * xstormy16-asm.c, * xstormy16-desc.c, * xstormy16-dis.c, * xstormy16-ibld.c: Regenerate.
2018-02-27[ARM] Remove ARM_FEATURE_COPY macroThomas Preud'homme1-2/+2
Among the macros to manipulate an arm_feature_set structure is the ARM_FEATURE_COPY which copy the value of a feature set into another. This can be achieved with a simple assignement which most of the existing code does. This patch removes the last 2 uses of that macro and remove the macro altogether. 2018-02-27 Thomas Preud'homme <thomas.preudhomme@arm.com> include/ * opcode/arm.h (ARM_FEATURE_COPY): Remove macro definition. 2018-02-27 Thomas Preud'homme <thomas.preudhomme@arm.com> opcodes/ * arm-dis.c (print_insn_coprocessor): Replace uses of ARM_FEATURE_COPY macro by assignements.
2018-02-19[ARM] Fix bxns maskThomas Preud'homme1-1/+1
Bit 7 of BXNS is a fixed bit which distinguish it from BLXNS. Yet it is not set in the disassembler entry mask. This commit fixes that. 2018-02-19 Thomas Preud'homme <thomas.preudhomme@arm.com> opcodes/ * arm-dis.c (thumb_opcodes): Fix BXNS mask.
2018-01-09[Arm] Add CSDB instructionJames Greenhalgh1-0/+6
CSDB is a new instruction which Arm has defined. As it shares the encoding space with NOP instructions, it is available from Armv3 in Arm mode, and Armv6T2 in Thumb mode. OK? If so, please commit on my behalf as I don't have commit rights over here. Thanks, James --- opcodes/ 2018-01-09 James Greenhalgh <james.greenhalgh@arm.com> * arm-dis.c (arm_opcodes): Add csdb. (thumb32_opcodes): Add csdb. gas/ 2018-01-09 James Greenhalgh <james.greenhalgh@arm.com> * config/tc-arm.c (insns): Add csdb, enable for Armv3 and above in Arm execution state, and Armv6T2 and above in Thumb execution state. * testsuite/gas/arm/csdb.s: New. * testsuite/gas/arm/csdb.d: New. * testsuite/gas/arm/thumb2_it_bad.l: Add csdb. * testsuite/gas/arm/thumb2_it_bad.s: Add csdb.
2018-01-03Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2017-11-08Adds command line support for Armv8.4-A, via the new command line option ↵Jiong Wang1-0/+18
-march=armv8.4-a. Add support for "+dotprod" ARM feature (required for ARMv8.4-A). Add assembler and disassembler support for new FP16 instructions introduced in Armv8.4-A gas * config/tc-arm.c (arm_extensions): (arm_archs): New entry for "armv8.4-a". Add FPU_ARCH_DOTPROD_NEON_VFP_ARMV8. (arm_ext_v8_2): New variable. (enum arm_reg_type): New enumeration REG_TYPE_NSD. (reg_expected_msgs): New entry for REG_TYPE_NSD. (parse_typed_reg_or_scalar): Handle REG_TYPE_NSD. (parse_scalar): Support REG_TYPE_VFS. (enum operand_parse_code): New enumerations OP_RNSD and OP_RNSD_RNSC. (parse_operands): Handle OP_RNSD and OP_RNSD_RNSC. (NEON_SHAPE_DEF): New entries for DHH and DHS. (neon_scalar_for_fmac_fp16_long): New function to generate Rm encoding for new FP16 instructions in ARMv8.2-A. (do_neon_fmac_maybe_scalar_long): New function to encode new FP16 instructions in ARMv8.2-A. (do_neon_vfmal): Wrapper function for vfmal. (do_neon_vfmsl): Wrapper function for vfmsl. (insns): New entries for vfmal and vfmsl. * doc/c-arm.texi (-march): Document "armv8.4-a". * testsuite/gas/arm/dotprod-mandatory.d: New test. * testsuite/gas/arm/armv8_2-a-fp16.s: New test source. * testsuite/gas/arm/armv8_2-a-fp16-illegal.s: New test source. * testsuite/gas/arm/armv8_2-a-fp16.d: New test. * testsuite/gas/arm/armv8_3-a-fp16.d: New test. * testsuite/gas/arm/armv8_4-a-fp16.d: New test. * testsuite/gas/arm/armv8_2-a-fp16-thumb2.d: New test. * testsuite/gas/arm/armv8_2-a-fp16-illegal.d: New test. * testsuite/gas/arm/armv8_2-a-fp16-illegal.l: New error file. opcodes * arm-dis.c (coprocessor_opcodes): New entries for ARMv8.2-A new FP16 instructions, including vfmal.f16 and vfmsl.f16. include * opcode/arm.h (ARM_AEXT2_V8_4A): Include Dot Product feature. (ARM_EXT2_V8_4A): New macro. (ARM_AEXT2_V8_4A): Likewise. (ARM_ARCH_V8_4A): Likewise.
2017-08-09[ARM] Don't warn on REG_SP when used in CRC32 instructionsJiong Wang1-11/+6
According to ARMv8-A architecture manual, REG_SP is allowed in CRC32 instructions in Thumb mode. It is REG_PC that will cause unpredictable behaviours on both ARM and Thumb. This patch removes the incorrect warning on Thumb mode. Meanwhile the disassembler is updated to use format "<bitfield>R" instead of "<bitfield>S". "<bitfield>S" is not used elsewhere. so I have deleted related code from the disassembler. gas/ * config/tc-arm.c (do_crc32_1): Remove warning on REG_SP for thumb_mode. * testsuite/gas/arm/crc32-armv8-a-bad.d: Update exepcted result. * testsuite/gas/arm/crc32-armv8-r-bad.d: Likewise. * testsuite/gas/arm/crc32-armv8-a.d: Likewise. * testsuite/gas/arm/crc32-armv8-r.d: Likewise. * testsuite/gas/arm/crc32-armv8-ar-bad.s: Update test case. * testsuite/gas/arm/crc32-armv8-ar.s: Likewise. * testsuite/gas/arm/crc32-bad.l: Update expected error message. opcode/ * arm-dis.c (thumb32_opcodes): Use format 'R' instead of 'S' for register operands in CRC instructions. (print_insn_thumb32): Remove "<bitfield>S" support. Updated the comments.
2017-07-04[Patch ARM] Support MVFR2 VFP Coprocessor register for ARMv8-ARamana Radhakrishnan1-0/+4
This patch adds support mvfr2 control registers for armv8-a as this was missed from the original port to armv8-a (documented at G6.2.109 in (Issue B.a) of the ARM-ARM. This was discovered by an internal user of the GNU toolchain. I'd like to backport this to the binutils 2.28 and binutils 2.29 release branch if possible (with suitable testing and basically checking removing the armv8-r parts). Tristan - are you ok with the backports ? Applied to trunk. regards Ramana 2017-07-04 Ramana Radhakrishnan <ramana.radhakrishnan@arm.com> * gas/config/tc-arm.c (arm_regs): Add MVFR2. (do_vmrs): Constraint for MVFR2 and armv8. (do_vmsr): Likewise. * gas/testsuite/gas/arm/armv8-a+fp.d: Update. * gas/testsuite/gas/arm/armv8-ar+fp.s: Likewise. * gas/testsuite/gas/arm/armv8-r+fp.d: Likewise. * gas/testsuite/gas/arm/vfp-bad.s: Likewise. * gas/testsuite/gas/arm/vfp-bad.l: Likewise. * opcodes/arm-dis.c: Support MVFR2 in disassembly with vmrs and vmsr.
2017-06-28[ARM] Assembler and disassembler support Dot Product ExtensionJiong Wang1-0/+6
This patch add assembler and disassembler support for new Dot Product Extension. The support can be enabled through the new "+dotprod" extension. include/ * opcode/arm.h (FPU_NEON_EXT_DOTPROD): New macro. (FPU_ARCH_DOTPROD_NEON_VFP_ARMV8): New macro. gas/ * config/tc-arm.c (fpu_neon_ext_dotprod): New variable. (neon_scalar_for_mul): Improve comments. (do_neon_dotproduct): New function to encode Dot Product instructions. (do_neon_dotproduct_s): Wrapper function for signed Dot Product instructions. (do_neon_dotproduct_u): Wrapper function for unsigned Dot Product instructions. (insns): New entries for vsdot and vudot. (arm_extensions): New entry for "dotprod". * doc/c-arm.texi: Document new "dotprod" extension. * testsuite/gas/arm/dotprod.s: New test source. * testsuite/gas/arm/dotprod-illegal.s: New test source. * testsuite/gas/arm/dotprod.d: New test. * testsuite/gas/arm/dotprod-thumb2.d: New test. * testsuite/gas/arm/dotprod-illegal.d: New test. * testsuite/gas/arm/dotprod-legacy-arch.d: New test. * testsuite/gas/arm/dotprod-illegal.l: New error file. * testsuite/gas/arm/dotprod-legacy-arch.l: New error file. opcodes/ * arm-dis.c (coprocessor_opcodes): New entries for vsdot and vudot.
2017-06-14Don't use print_insn_XXX in GDBYao Qi1-1/+1
This is a follow-up to [PATCH 0/6] Unify the disassembler selection in gdb and objdump https://sourceware.org/ml/binutils/2017-05/msg00192.html that is, opcodes is able to select the right disassembler, so gdb doesn't have to select them. Instead, gdb can just use default_print_insn. As a result, these print_insn_XXX are not used out of opcodes, so this patch also moves their declarations from include/dis-asm.h to opcodes/disassemble.h. With this change, GDB doesn't use any print_insn_XXX directly any more. gdb: 2017-06-14 Yao Qi <yao.qi@linaro.org> * aarch64-tdep.c (aarch64_gdb_print_insn): Call default_print_insn instead of print_insn_aarch64. * arm-tdep.c (gdb_print_insn_arm): Call default_print_insn instead of print_insn_big_arm and print_insn_little_arm. * i386-tdep.c (i386_print_insn): Call default_print_insn instead of print_insn_i386. * ia64-tdep.c (ia64_print_insn): Call default_print_insn instead of print_insn_ia64. * mips-tdep.c (gdb_print_insn_mips): Call default_print_insn instead of print_insn_big_mips and print_insn_little_mips. * spu-tdep.c (gdb_print_insn_spu): Call default_print_insn instead of print_insn_spu. include: 2017-06-14 Yao Qi <yao.qi@linaro.org> * dis-asm.h (print_insn_aarch64): Move it to opcodes/disassemble.h. (print_insn_big_arm, print_insn_big_mips): Likewise. (print_insn_i386, print_insn_ia64): Likewise. (print_insn_little_arm, print_insn_little_mips): Likewise. (print_insn_spu): Likewise. opcodes: 2017-06-14 Yao Qi <yao.qi@linaro.org> * aarch64-dis.c: Include disassemble.h instead of dis-asm.h. * arm-dis.c: Likewise. * ia64-dis.c: Likewise. * mips-dis.c: Likewise. * spu-dis.c: Likewise. * disassemble.h (print_insn_aarch64): New declaration, moved from include/dis-asm.h. (print_insn_big_arm, print_insn_big_mips): Likewise. (print_insn_i386, print_insn_ia64): Likewise. (print_insn_little_arm, print_insn_little_mips): Likewise.
2017-06-14[opcodes][arm] Remove bogus entry added by accident in former patchAndre Vieira1-2/+0
2017-07-14 Andre Vieira <andre.simoesdiasvieira@arm.com> * arm-dis.c (print_insn_arm): Remove bogus entry for bx.
2017-05-02Fix value in comment of disassembled ARM type A opcodes.Bernd Edlinger1-2/+2
* arm-dis.c (print_insn_thumb32): Fix value_in_comment.
2017-04-05-Wwrite-strings: Constify struct disassemble_info's disassembler_options fieldPedro Alves1-2/+2
The memory disassemble_info::disassembler_options points to is always owned by the client. I.e., that field is an non-owning, observing pointer. Thus const makes sense. Are the include/ and opcodes/ bits OK? Tested on x86_64 Fedora 23, built with --enable-targets=all. include/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * dis-asm.h (disassemble_info) <disassembler_options>: Now a "const char *". (next_disassembler_option): Constify. opcodes/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * arc-dis.c (parse_option, parse_disassembler_options): Constify. * arm-dis.c (parse_arm_disassembler_options): Constify. * ppc-dis.c (powerpc_init_dialect): Constify local. * vax-dis.c (parse_disassembler_options): Constify. gdb/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * arm-tdep.c (show_disassembly_style_sfunc): Constify local. * disasm.c (set_disassembler_options): Constify local. * i386-tdep.c (i386_print_insn): Remove cast and FIXME comment.
2017-02-28GDB: Add support for the new set/show disassembler-options commands.Peter Bergner1-95/+74
This commit adds support to GDB so that it can modify the disassembler-options value that is passed to the disassembler, similar to objdump's -M option. Currently, the only supported targets are ARM, PowerPC and S/390, but adding support for a new target(s) is not difficult. include/ * dis-asm.h (disasm_options_t): New typedef. (parse_arm_disassembler_option): Remove prototype. (set_arm_regname_option): Likewise. (get_arm_regnames): Likewise. (get_arm_regname_num_options): Likewise. (disassemble_init_s390): New prototype. (disassembler_options_powerpc): Likewise. (disassembler_options_arm): Likewise. (disassembler_options_s390): Likewise. (remove_whitespace_and_extra_commas): Likewise. (disassembler_options_cmp): Likewise. (next_disassembler_option): New inline function. (FOR_EACH_DISASSEMBLER_OPTION): New macro. opcodes/ * disassemble.c Include "safe-ctype.h". (disassemble_init_for_target): Handle s390 init. (remove_whitespace_and_extra_commas): New function. (disassembler_options_cmp): Likewise. * arm-dis.c: Include "libiberty.h". (NUM_ELEM): Delete. (regnames): Use long disassembler style names. Add force-thumb and no-force-thumb options. (NUM_ARM_REGNAMES): Rename from this... (NUM_ARM_OPTIONS): ...to this. Use ARRAY_SIZE. (get_arm_regname_num_options): Delete. (set_arm_regname_option): Likewise. (get_arm_regnames): Likewise. (parse_disassembler_options): Likewise. (parse_arm_disassembler_option): Rename from this... (parse_arm_disassembler_options): ...to this. Make static. Use new FOR_EACH_DISASSEMBLER_OPTION macro to scan over options. (print_insn): Use parse_arm_disassembler_options. (disassembler_options_arm): New function. (print_arm_disassembler_options): Handle updated regnames. * ppc-dis.c: Include "libiberty.h". (ppc_opts): Add "32" and "64" entries. (ppc_parse_cpu): Use ARRAY_SIZE and disassembler_options_cmp. (powerpc_init_dialect): Add break to switch statement. Use new FOR_EACH_DISASSEMBLER_OPTION macro. (disassembler_options_powerpc): New function. (print_ppc_disassembler_options): Use ARRAY_SIZE. Remove printing of "32" and "64". * s390-dis.c: Include "libiberty.h". (init_flag): Remove unneeded variable. (struct s390_options_t): New structure type. (options): New structure. (init_disasm): Rename from this... (disassemble_init_s390): ...to this. Add initializations for current_arch_mask and option_use_insn_len_bits_p. Remove init_flag. (print_insn_s390): Delete call to init_disasm. (disassembler_options_s390): New function. (print_s390_disassembler_options): Print using information from struct 'options'. * po/opcodes.pot: Regenerate. binutils/ * objdump.c (main): Use remove_whitespace_and_extra_commas. gdb/ * NEWS: Mention new set/show disassembler-options commands. * doc/gdb.texinfo: Document new set/show disassembler-options commands. * disasm.c: Include "arch-utils.h", "gdbcmd.h" and "safe-ctype.h". (prospective_options): New static variable. (gdb_disassembler::gdb_disassembler): Initialize m_di.disassembler_options. (gdb_buffered_insn_length_init_dis): Initilize di->disassembler_options. (get_disassembler_options): New function. (set_disassembler_options): Likewise. (set_disassembler_options_sfunc): Likewise. (show_disassembler_options_sfunc): Likewise. (disassembler_options_completer): Likewise. (_initialize_disasm): Likewise. * disasm.h (get_disassembler_options): New prototype. (set_disassembler_options): Likewise. * gdbarch.sh (gdbarch_disassembler_options): New variable. (gdbarch_verify_disassembler_options): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * arm-tdep.c (num_disassembly_options): Delete. (set_disassembly_style): Likewise. (arm_disassembler_options): New static variable. (set_disassembly_style_sfunc): Convert short style name into long option name. Call set_disassembler_options. (show_disassembly_style_sfunc): New function. (arm_gdbarch_init): Call set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. (_initialize_arm_tdep): Delete regnames variable and update callers. (arm_disassembler_options): Initialize. (disasm_options): New variable. (num_disassembly_options): Rename from this... (num_disassembly_styles): ...to this. Compute by scanning through disasm_options. (valid_disassembly_styles): Initialize using disasm_options. Remove calls to parse_arm_disassembler_option, get_arm_regnames and set_arm_regname_option. Pass show_disassembly_style_sfunc to the "disassembler" setshow command. * rs6000-tdep.c (powerpc_disassembler_options): New static variable. (rs6000_gdbarch_init): Call set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. * s390-tdep.c (s390_disassembler_options): New static variable. (s390_gdbarch_init):all set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. gdb/testsuite/ * gdb.arch/powerpc-power.exp: Delete test. * gdb.arch/powerpc-power.s: Likewise. * gdb.disasm/disassembler-options.exp: New test. * gdb.arch/powerpc-altivec.exp: Likewise. * gdb.arch/powerpc-altivec.s: Likewise. * gdb.arch/powerpc-altivec2.exp: Likewise. * gdb.arch/powerpc-altivec2.s: Likewise. * gdb.arch/powerpc-altivec3.exp: Likewise. * gdb.arch/powerpc-altivec3.s: Likewise. * gdb.arch/powerpc-power7.exp: Likewise. * gdb.arch/powerpc-power7.s: Likewise. * gdb.arch/powerpc-power8.exp: Likewise. * gdb.arch/powerpc-power8.s: Likewise. * gdb.arch/powerpc-power9.exp: Likewise. * gdb.arch/powerpc-power9.s: Likewise. * gdb.arch/powerpc-vsx.exp: Likewise. * gdb.arch/powerpc-vsx.s: Likewise. * gdb.arch/powerpc-vsx2.exp: Likewise. * gdb.arch/powerpc-vsx2.s: Likewise. * gdb.arch/powerpc-vsx3.exp: Likewise. * gdb.arch/powerpc-vsx3.s: Likewise. * gdb.arch/arm-disassembler-options.exp: Likewise. * gdb.arch/powerpc-disassembler-options.exp: Likewise. * gdb.arch/s390-disassembler-options.exp: Likewise.
2017-01-18[ARM] Fix the decoding of indexed element VCMLA instructionSzabolcs Nagy1-4/+4
Bit 24 of the indexed element vcmla decode mask was incorrectly left unset. This could cause incorrect disassembly of some currently undefined instructions as vcmla. Rotatation immediates were not printed correctly in the disassembly (could print 170 and 280 instead of 180 and 270). opcodes/ * arm-dis.c (coprocessor_opcodes): Fix vcmla mask and disassembly. gas/ * testsuite/gas/arm/armv8_3-a-simd.s: Add vcmla tests. * testsuite/gas/arm/armv8_3-a-simd.d: Update.
2017-01-02Update year range in copyright notice of all files.Alan Modra1-1/+1
2016-12-16Fix compile time warning building arm-dis.cNick Clifton1-2/+2
2016-12-05[ARM] Add ARMv8.3 VCMLA and VCADD instructionsSzabolcs Nagy1-0/+28
Add support for VCMLA and VCADD advanced SIMD complex number instructions. The command line option is -march=armv8.3-a+fp16+simd for enabling all instructions. In arm-dis.c the formatting syntax was abused a bit to select between 0 vs 90 or 180 vs 270 or 90 vs 270 based on a bit value instead of duplicating entries in the opcode table. gas/ * config/tc-arm.c (do_vcmla, do_vcadd): Define. (neon_scalar_for_vcmla): Define. (enum operand_parse_code): Add OP_IROT1 and OP_IROT2. (NEON_ENC_TAB): Add DDSI and QQSI variants. (insns): Add vcmla and vcadd. * testsuite/gas/arm/armv8_3-a-simd.d: New. * testsuite/gas/arm/armv8_3-a-simd.s: New. * testsuite/gas/arm/armv8_3-a-simd-bad.d: New. * testsuite/gas/arm/armv8_3-a-simd-bad.l: New. * testsuite/gas/arm/armv8_3-a-simd-bad.s: New. opcodes/ * arm-dis.c (coprocessor_opcodes): Add vcmla and vcadd. (print_insn_coprocessor): Add 'V' format for neon D or Q regs.
2016-12-05[ARM] Add ARMv8.3 VJCVT instructionSzabolcs Nagy1-0/+4
Add support for VJCVT javascript conversion instruction. gas/ * config/tc-arm.c (arm_ext_v8_3, do_vjcvt): Define. (insns): Add vjcvt. * testsuite/gas/aarch64/armv8_3-a-fp.s: New. * testsuite/gas/aarch64/armv8_3-a-fp.d: New. * testsuite/gas/aarch64/armv8_3-a-fp-bad.s: New. * testsuite/gas/aarch64/armv8_3-a-fp-bad.d: New. * testsuite/gas/aarch64/armv8_3-a-fp-bad.l: New. opcodes/ * arm-dis.c (coprocessor_opcodes): Add vjcvt.
2016-10-06-Wimplicit-fallthrough warning fixesAlan Modra1-0/+1
Comment changes. bfd/ * coff-h8300.c: Spell fall through comments consistently. * coffgen.c: Likewise. * elf32-hppa.c: Likewise. * elf32-ppc.c: Likewise. * elf32-score.c: Likewise. * elf32-score7.c: Likewise. * elf64-ppc.c: Likewise. * elfxx-aarch64.c: Likewise. * elfxx-mips.c: Likewise. * cpu-ns32k.c: Add missing fall through comments. * elf-m10300.c: Likewise. * elf32-arm.c: Likewise. * elf32-avr.c: Likewise. * elf32-bfin.c: Likewise. * elf32-frv.c: Likewise. * elf32-i386.c: Likewise. * elf32-microblaze.c: Likewise. * elf32-nds32.c: Likewise. * elf32-ppc.c: Likewise. * elf32-rl78.c: Likewise. * elf32-rx.c: Likewise. * elf32-s390.c: Likewise. * elf32-sh.c: Likewise. * elf32-tic6x.c: Likewise. * elf64-ia64-vms.c: Likewise. * elf64-ppc.c: Likewise. * elf64-s390.c: Likewise. * elf64-x86-64.c: Likewise. * elflink.c: Likewise. * elfnn-aarch64.c: Likewise. * elfnn-ia64.c: Likewise. * ieee.c: Likewise. * oasys.c: Likewise. * pdp11.c: Likewise. * srec.c: Likewise. * versados.c: Likewise. opcodes/ * aarch64-opc.c: Spell fall through comments consistently. * i386-dis.c: Likewise. * aarch64-dis.c: Add missing fall through comments. * aarch64-opc.c: Likewise. * arc-dis.c: Likewise. * arm-dis.c: Likewise. * i386-dis.c: Likewise. * m68k-dis.c: Likewise. * mep-asm.c: Likewise. * ns32k-dis.c: Likewise. * sh-dis.c: Likewise. * tic4x-dis.c: Likewise. * tic6x-dis.c: Likewise. * vax-dis.c: Likewise. binutils/ * dlltool.c: Spell fall through comments consistently. * objcopy.c: Likewise. * readelf.c: Likewise. * dwarf.c: Add missing fall through comments. * elfcomm.c: Likewise. * sysinfo.y: Likewise. * readelf.c: Likewise. Also remove extraneous comments. gas/ * app.c: Add missing fall through comments. * dw2gencfi.c: Likewise. * expr.c: Likewise. * config/tc-alpha.c: Likewise. * config/tc-arc.c: Likewise. * config/tc-arm.c: Likewise. * config/tc-cr16.c: Likewise. * config/tc-crx.c: Likewise. * config/tc-dlx.c: Likewise. * config/tc-h8300.c: Likewise. * config/tc-hppa.c: Likewise. * config/tc-i370.c: Likewise. * config/tc-i386.c: Likewise. * config/tc-i960.c: Likewise. * config/tc-ia64.c: Likewise. * config/tc-m68hc11.c: Likewise. * config/tc-m68k.c: Likewise. * config/tc-mep.c: Likewise. * config/tc-metag.c: Likewise. * config/tc-microblaze.c: Likewise. * config/tc-mips.c: Likewise. * config/tc-ns32k.c: Likewise. * config/tc-rx.c: Likewise. * config/tc-score.c: Likewise. * config/tc-score7.c: Likewise. * config/tc-sh.c: Likewise. * config/tc-tic4x.c: Likewise. * config/tc-vax.c: Likewise. * config/tc-xstormy16.c: Likewise. * config/tc-z80.c: Likewise. * config/tc-z8k.c: Likewise. * config/obj-elf.c: Likewise. * config/tc-i386.c: Likewise. * depend.c: Spell fall through comments consistently. * config/tc-arm.c: Likewise. * config/tc-d10v.c: Likewise. * config/tc-i960.c: Likewise. * config/tc-ia64.c: Likewise. * config/tc-m68k.c: Likewise. * config/tc-mcore.c: Likewise. * config/tc-mep.c: Likewise. * config/tc-ns32k.c: Likewise. * config/tc-visium.c: Likewise. * config/tc-xstormy16.c: Likewise. * config/tc-z8k.c: Likewise. gprof/ * gprof.c: Add missing fall through comments. ld/ * lexsup.c: Spell fall through comments consistently and add missing fall through comments.
2016-08-26Add missing ARMv8-M special registersThomas Preud'homme1-14/+23
2016-08-26 Thomas Preud'homme <thomas.preudhomme@arm.com> gas/ * config/tc-arm.c (v7m_psrs): Add MSPLIM, PSPLIM, MSPLIM_NS, PSPLIM_NS, PRIMASK_NS, BASEPRI_NS, FAULTMASK_NS, CONTROL_NS, SP_NS and their lowecase counterpart special registers. Write register identifier in hex. * testsuite/gas/arm/archv8m-cmse-msr.s: Reorganize tests per operation, special register and then case. Use different register for each operation. Add tests for new special registers. * testsuite/gas/arm/archv8m-cmse-msr-base.d: Adapt expected result accordingly. * testsuite/gas/arm/archv8m-cmse-msr-main.d: Likewise. * testsuite/gas/arm/archv8m-main-dsp-4.d: Likewise. opcodes/ * arm-dis.c (psr_name): Use hex as case labels. Add detection for MSPLIM, PSPLIM, MSPLIM_NS, PSPLIM_NS, PRIMASK_NS, BASEPRI_NS, FAULTMASK_NS, CONTROL_NS and SP_NS special registers.
2016-06-30Fix typo in commentYao Qi1-1/+1
This patch fixes the typo "uf" in the comment. I'll push it in as the change is obvious. 2016-06-30 Yao Qi <yao.qi@linaro.org> * arm-dis.c (print_insn): Fix typo in comment.
2016-06-07[ARM] Add command line option for RAS extension.Matthew Wahab1-2/+2
This patch adds the architecture extension "+ras" to enable RAS support. It is enabled by default for -march=armv8.2-a and available but disabled by default for armv8-a and armv8.1-a. gas/ * config/tc-arm.c (arm_ext_v8_2): Rename to arm_ext_ras. (arm_ext_ras): Renamed from arm_ext_v8_2. (insns): Update for arm_ext_v8_2 renaming. (arm_extensions): Add "ras". * doc/c-arm.texi (ARM Options): Add an entry for "ras". * testsuite/gas/arm/armv8-a+ras.d: New. * testsuite/gas/arm/armv8_2-a.d: Add explicit command line options. include/ * opcode/arm.h (ARM_EXT2_RAS): New. Also align preceding entries. (ARM_AEXT_V8_2A): Add ARM_EXT2_RAS. opcodes/ * arm-dis.c (arm_opcodes): Replace ARM_EXT_V8_2A with ARM_EXT_RAS in relevant entries.
2016-05-10Use getters/setters to access ARM branch typeThomas Preud'homme1-4/+5
2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com> bfd/ * elf32-arm.c (elf32_arm_size_stubs): Use new macros ARM_GET_SYM_BRANCH_TYPE and ARM_SET_SYM_BRANCH_TYPE to respectively get and set branch type of a symbol. (bfd_elf32_arm_process_before_allocation): Likewise. (elf32_arm_relocate_section): Likewise and fix identation along the way. (allocate_dynrelocs_for_symbol): Likewise. (elf32_arm_finish_dynamic_symbol): Likewise. (elf32_arm_swap_symbol_in): Likewise. (elf32_arm_swap_symbol_out): Likewise. gas/ * config/tc-arm.c (arm_adjust_symtab): Use ARM_SET_SYM_BRANCH_TYPE to set branch type of a symbol. gdb/ * arm-tdep.c (arm_elf_make_msymbol_special): Use ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol. include/ * arm.h (enum arm_st_branch_type): Add new ST_BRANCH_ENUM_SIZE enumerator. (NUM_ENUM_ARM_ST_BRANCH_TYPE_BITS): New macro. (ENUM_ARM_ST_BRANCH_TYPE_BITMASK): Likewise. (ARM_SYM_BRANCH_TYPE): Replace by ... (ARM_GET_SYM_BRANCH_TYPE): This and ... (ARM_SET_SYM_BRANCH_TYPE): This in two versions depending on whether BFD_ASSERT is defined or not. ld/ * emultempl/armelf.em (gld${EMULATION_NAME}_finish): Use ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol. opcodes/ * arm-dis.c (get_sym_code_type): Use ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol. (print_insn): Likewise.
generated by cgit v1.1 at 2024-11-29 16:26:21 +0000