| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Fix build errors:
cc1: warnings being treated as errors
In file included from .../opcodes/arc-opc.c:2630:
.../opcodes/arc-nps400-tbl.h:38: warning: integer constant is too large for 'long' type
.../opcodes/arc-nps400-tbl.h:38: warning: integer constant is too large for 'long' type
.../opcodes/arc-nps400-tbl.h:41: warning: integer constant is too large for 'long' type
.../opcodes/arc-nps400-tbl.h:41: warning: integer constant is too large for 'long' type
[...]
.../opcodes/arc-nps400-tbl.h:712: warning: integer constant is too large for 'long' type
.../opcodes/arc-nps400-tbl.h:712: warning: integer constant is too large for 'long' type
.../opcodes/arc-nps400-tbl.h:715: warning: integer constant is too large for 'long' type
.../opcodes/arc-nps400-tbl.h:715: warning: integer constant is too large for 'long' type
make[4]: *** [arc-opc.lo] Error 1
and:
cc1: warnings being treated as errors
.../gas/config/tc-arc.c: In function 'md_number_to_chars_midend':
.../gas/config/tc-arc.c:802: warning: integer constant is too large for 'long' type
.../gas/config/tc-arc.c:810: warning: integer constant is too large for 'long' type
make[4]: *** [config/tc-arc.o] Error 1
observed with GCC 4.1.2 and presumably other C89 compilers with the
`arc-elf' and `arc-linux-gnu' targets, caused by the use of constants
the values of which are outside the range of the `int' type (or the
`long' type if it is of the same with). In the C89 language standard
such constants are not implicitly converted to a wider type and an
explicit suffix is required for such constants.
Add a `ull' suffix then as with such constants used in other ports.
gas/
* config/tc-arc.c (md_number_to_chars_midend): Append `ull' to
large constants.
opcodes/
* arc-nps400-tbl.h: Append `ull' to large constants throughout.
|
|
A small number of NPS400 instruction incorrectly used NONE as an
insn_class_t, which would trigger a build warning. Fixed by changing to
MISC.
opcodes/ChangeLog:
* arc-nps400-tbl.h: Change incorrect use of NONE to MISC.
|
|
opcodes * arc-nps400-tbl.h: Add Ultra Ip and Miscellaneous instructions format.
* arc-opc.c: Add defines. e.g. F_NJ, F_NM , F_NO_T, F_NPS_SR, F_NPS_M, F_NPS_CORE, F_NPS_ALL.
(insert_nps_misc_imm_offset): New function.
(extract_nps_misc imm_offset): New function.
(arc_num_flag_operands): Add F_NJ, F_NM, F_NO_T.
(arc_flag_special_cases): Add F_NJ, F_NM, F_NO_T.
include * opcode/arc.h (insn_class_t): Add ULTRAIP and MISC class.
gas * testsuite/gas/arc/nps400-12.s: New file.
* testsuite/gas/arc/nps400-12.d: New file.
|
|
Instructions for loading or storing 16/32B data from one address type to
another.
gas/ChangeLog
* testsuite/gas/arc/nps400-11.s: New file.
* testsuite/gas/arc/nps400-11.d: New file.
include/ChangeLog
* opcode/arc.h (insn_class_t): Add DMA class.
opcodes/ChangeLog
* arc-nps400-tbl.h: Add cp32/cp16 instructions format.
* arc-opc.c: Add F_NPS_NA, NPS_DMA_IMM_ENTRY, NPS_DMA_IMM_OFFSET.
(insert_nps_imm_offset): New function.
(extract_nps_imm_offset): New function.
(insert_nps_imm_entry): New function.
(extract_nps_imm_entry): New function.
|
|
When we match against an address type operand within an instruction it
is important that we match exactly the right address type operand early
on, during the opcode selection phase. If we wait until the operand
insertion phase to check that we have the correct address operand, then
it is too late to select an alternative opcode. This becomes important
only when we have multiple opcodes with the same mnemonic, and operand
lists that differ only in the type of the address operands.
This commit fixes this issue, and adds some example instructions that
require this issue to be fixed (the instructions are identical except
for the address type operand).
gas/ChangeLog:
* config/tc-arc.c (find_opcode_match): Use insert function to
validate matching address type operands.
* testsuite/gas/arc/nps400-10.d: New file.
* testsuite/gas/arc/nps400-10.s: New file.
opcodes/ChangeLog:
* arc-opc.c (arc_flag_operands): Add F_DI14.
(arc_flag_classes): Add C_DI14.
* arc-nps400-tbl.h: Add new exc instructions.
|
|
gas/ChangeLog:
* testsuite/gas/arc/nps-400-9.d: Added.
* testsuite/gas/arc/nps-400-9.s: Added.
include/ChangeLog:
* opcode/arc.h: Add PROTOCOL_DECODE to insn_class_t.
opcodes/ChangeLog:
* arc-dis.c (arc_insn_length): Return length 8 for instructions with
major opcode 0xa.
* arc-nps-400-tbl.h: Add dcmac instruction.
* arc-opc.c (arc_operands): Added operands for dcmac instruction.
(insert_nps_rbdouble_64): Added.
(extract_nps_rbdouble_64): Added.
(insert_nps_proto_size): Added.
(extract_nps_proto_size): Added.
|
|
The current handling for arc instructions longer than 32-bits is all
handled as a special case in both the assembler and disassembler.
The problem with this approach is that it leads to code duplication,
selecting a long instruction is exactly the same process as selecting a
short instruction, except over more bits, in both cases we select based
on bit comparison, and initial operand insertion and extraction.
This commit unifies both the long and short instruction worlds,
converting the core opcodes library from being largely 32-bit focused,
to being largely 64-bit focused.
The changes are, on the whole, not too much. There's obviously a lot of
type changes but otherwise the bulk of the code just works. Most of the
actual functional changes are to code that previously handled the longer
48 or 64 bit instructions. The insert/extract handlers for these have
now been brought into line with the short instruction insert/extract
handlers.
All of the special case handling code that was previously added has now
been removed again. Overall, this commit reduces the amount of code in
the arc assembler and disassembler.
gas/ChangeLog:
* config/tc-arc.c (struct arc_insn): Change type of insn field.
(md_number_to_chars_midend): Support 6- and 8-byte values.
(emit_insn0): Update debug output.
(find_opcode_match): Likewise.
(build_fake_opcode_hash_entry): Delete.
(find_special_case_long_opcode): Delete.
(find_special_case): Remove long format special case handling.
(insert_operand): Change instruction type and update debug print
format.
(assemble_insn): Change instruction type, update debug print
formats, and remove unneeded assert.
include/ChangeLog:
* opcode/arc.h (struct arc_opcode): Change type of opcode and mask
fields.
(struct arc_long_opcode): Delete.
(struct arc_operand): Change types for insert and extract
handlers.
opcodes/ChangeLog:
* arc-dis.c (struct arc_operand_iterator): Remove all fields
relating to long instruction processing, add new limm field.
(OPCODE): Rename to...
(OPCODE_32BIT_INSN): ...this.
(OPCODE_AC): Delete.
(skip_this_opcode): Handle different instruction lengths, update
macro name.
(special_flag_p): Update parameter type.
(find_format_from_table): Update for more instruction lengths.
(find_format_long_instructions): Delete.
(find_format): Update for more instruction lengths.
(arc_insn_length): Likewise.
(extract_operand_value): Update for more instruction lengths.
(operand_iterator_next): Remove code relating to long
instructions.
(arc_opcode_to_insn_type): New function.
(print_insn_arc):Update for more instructions lengths.
* arc-ext.c (extInstruction_t): Change argument type.
* arc-ext.h (extInstruction_t): Change argument type.
* arc-fxi.h: Change type unsigned to unsigned long long
extensively throughout.
* arc-nps400-tbl.h: Add long instructions taken from
arc_long_opcodes table in arc-opc.c.
* arc-opc.c: Update parameter types on insert/extract handlers.
(arc_long_opcodes): Delete.
(arc_num_long_opcodes): Delete.
(arc_opcode_len): Update for more instruction lengths.
|
|
A few masks were incorrect, there were opcode bits that lives outside of
the instruction mask, the effected instructions are decode1, zncv, and
efabgt.
Previously these instructions would assemble and disassemble correctly,
and a correctly encoded binary should behave no differently. The only
difference would be seen in a few incorrectly encoded binaries,
previously these would have decoded to the above instructions, while now
they will not.
opcodes/ChangeLog:
* arc-nps400-tbl.h: Fix some instruction masks.
|
|
opcodes * arc-nps400-tbl.h: Change block comments to GNU format.
* arc-dis.c: Add new globals addrtypenames,
addrtypenames_max, and addtypeunknown.
(get_addrtype): New function.
(print_insn_arc): Print colons and address types when
required.
* arc-opc.c: Add MAKE_INSERT_NPS_ADDRTYPE macro and use to
define insert and extract functions for all address types.
(arc_operands): Add operands for colon and all address
types.
* arc-nps-400-tbl.h: Add NPS-400 BMU instructions to opcode table.
* arc-opc.c: Add NPS_BD_TYPE and NPS_BMU_NUM operands,
insert_nps_bd_num_buff and extract_nps_bd_num_buff functions.
* arc-nps-400-tbl.h: Add NPS-400 PMU instructions to opcode table.
* arc-opc.c: Add NPS_PMU_NXT_DST and NPS_PMU_NUM_JOB operands,
insert_nps_pmu_num_job and extract_nps_pmu_num_job functions.
include * opcode/arc.h: Add ARC_OPERAND_ADDRTYPE,
ARC_OPERAND_COLON. Add the arc_nps_address_type enum and
ARC_NUM_ADDRTYPES.
* opcode/arc.h: Add BMU to insn_class_t enum.
* opcode/arc.h: Add PMU to insn_class_t enum.
gas * config/tc-arc.c: Add new global arc_addrtype_hash.
Define O_colon and O_addrtype.
(debug_exp): Add O_colon and O_addrtype.
(tokenize_arguments): Handle colon and address type
tokens.
(declare_addrtype): New function.
(md_begin): Initialise arc_addrtype_hash.
(arc_parse_name): Add lookup of address types.
(assemble_insn): Handle colons and address types by
ignoring them.
* testsuite/gas/arc/nps400-8.s: New file.
* testsuite/gas/arc/nps400-8.d: New file.
* testsuite/gas/arc/nps400-8.s: Add PMU instruction tests.
* testsuite/gas/arc/nps400-8.d: Add expected PMU
instruction output.
|
|
gas * config/tc-arc.c (check_cpu_feature, md_parse_option):
Add nps400 option and feature. Add check for nps400
feature. Refactor existing checks to check subclass before
feature enablement.
(md_show_usage): Document flags for NPS-400 and add some other
undocumented flags.
(cpu_type): Remove nps400 CPU type entry
(check_zol): Remove bfd_mach_arc_nps400 case.
(md_show_usage): Add help on -mcpu=nps400.
(cpu_types): Add entry for nps400 as arc700 plus nps400 extension
set.
* doc/c-arc.texi: Document the -mnps400, -mspfp, -mdpfp, and
-fpuda flags. Document -mcpu=nps400.
* testsuite/gas/arc/nps-400-0.d: Use -mcpu=arc700 -mnps400. Change
expected flags to match ARC700 instead of NPS400.
* testsuite/gas/arc/nps-400-1.d: Use -mcpu=arc700 -mnps400.
* testsuite/gas/arc/nps-400-2.d: Likewise.
* testsuite/gas/arc/nps-400-3.d: Likewise.
* testsuite/gas/arc/nps-400-4.d: Likewise.
* testsuite/gas/arc/nps-400-5.d: Likewise.
* testsuite/gas/arc/nps-400-6.d: Likewise.
* testsuite/gas/arc/nps-400-7.d: Likewise.
* testsuite/gas/arc/textinsn2op01.s: Change opcode of myinsn to
avoid clash with cbba instruction.
* testsuite/gas/arc/textinsn2op01.d: Likewise.
* testsuite/gas/arc/textinsn3op.d: Likewise.
* testsuite/gas/arc/textinsn3op.s: Likewise.
* testsuite/gas/arc/nps-400-0.d: Test using NPS-400 using
-mcpu=nps400 as an alternative to -mcpu=arc700 -mnps400 flags.
binutils* readelf.c (decode_ARC_machine_flags): Remove E_ARC_MACH_NPS400
case.
ld * testsuite/ld-arc/nps-1a.d: Use -mcpu=arc700 -mnps400.
* testsuite/ld-arc/nps-1b.d: Likewise.
include * opcode/arc.h: Add nps400 extension and instruction
subclass.
Remove ARC_OPCODE_NPS400
* elf/arc.h: Remove E_ARC_MACH_NPS400
opcodes * arc-dis.c (arc_insn_length): Add comment on instruction length.
Use same method for determining instruction length on ARC700 and
NPS-400.
(arc_insn_length, print_insn_arc): Remove bfd_mach_arc_nps400.
* arc-nps400-tbl.h: Make all nps400 instructions ARC700 instructions
with the NPS400 subclass.
* arc-opc.c: Likewise.
bfd * archures.c: Remove bfd_mach_arc_nps400.
* bfd-in2.h: Likewise.
* cpu-arc.c (arch_info_struct): Likewise.
* elf32-arc.c (arc_elf_object_p, arc_elf_final_write_processing):
Likewise.
|
|
This commit adds the ldbit instruction for the NPS-400. The ldbit
instruction uses the same encoding as the ld instruction, but sets
the ZZ field to 11 (which is a reserved setting), and sets the AA
field to 1 or 2 for the x2 and x4 flags respectively.
|
|
With the exception of ldbit, this commit adds implementations of
all DPI instructions for the NPS-400. These instructions are:
- hash / hash.p[0-3]
- tr
- utf8
- e4by
- addf
|
|
This commit completes the implementation of arithmetic and logic
instructions for the NPS-400. These instructions are:
- calcbsd / calcbxd
- calckey / calcxkey
- mxb / imxb
- addl, subl, orl, andl, xorl
- andab / orab
- lbdsize
- bdlen
- csms, csma, cbba
- zncv
- hofs
|
|
gas * config/tc-arc.c (parse_opcode_flags): New function.
(find_opcode_match): Move flag parsing code out to new function.
Ignore operands marked IGNORE.
(build_fake_opcode_hash_entry): New function.
(find_special_case_long_opcode): New function.
(find_special_case): Lookup long opcodes.
* testsuite/gas/arc/nps400-7.d: New file.
* testsuite/gas/arc/nps400-7.s: New file.
include * opcode/arc.h (MAX_INSN_ARGS): Increase to 16.
(struct arc_long_opcode): New structure.
(arc_long_opcodes): Declare.
(arc_num_long_opcodes): Declare.
opcodes * arc-dis.c (struct arc_operand_iterator): New structure.
(find_format_from_table): All the old content from find_format,
with some minor adjustments, and parameter renaming.
(find_format_long_instructions): New function.
(find_format): Rewritten.
(arc_insn_length): Add LSB parameter.
(extract_operand_value): New function.
(operand_iterator_next): New function.
(print_insn_arc): Use new functions to find opcode, and iterator
over operands.
* arc-opc.c (insert_nps_3bit_dst_short): New function.
(extract_nps_3bit_dst_short): New function.
(insert_nps_3bit_src2_short): New function.
(extract_nps_3bit_src2_short): New function.
(insert_nps_bitop1_size): New function.
(extract_nps_bitop1_size): New function.
(insert_nps_bitop2_size): New function.
(extract_nps_bitop2_size): New function.
(insert_nps_bitop_mod4_msb): New function.
(extract_nps_bitop_mod4_msb): New function.
(insert_nps_bitop_mod4_lsb): New function.
(extract_nps_bitop_mod4_lsb): New function.
(insert_nps_bitop_dst_pos3_pos4): New function.
(extract_nps_bitop_dst_pos3_pos4): New function.
(insert_nps_bitop_ins_ext): New function.
(extract_nps_bitop_ins_ext): New function.
(arc_operands): Add new operands.
(arc_long_opcodes): New global array.
(arc_num_long_opcodes): New global.
* arc-nps400-tbl.h: Add comments referencing arc_long_opcodes.
|
|
gas * testsuite/gas/arc/nps-400-1.s: Add rflt variants with
operands of types a,b,u6, 0,b,u6, and 0,b,limm.
* testsuite/gas/arc/nps-400-1.d: Likewise.
opcodes * arc-nps400-tbl.h: Add operands a,b,u6, 0,b,u6, and
0,b,limm to the rflt instruction.
|
|
Add some more arc/nps400 instructions and the associated operands.
There's also a test added into the assembler.
gas/ChangeLog:
* testsuite/gas/arc/nps400-6.d: New file.
* testsuite/gas/arc/nps400-6.s: New file.
include/ChangeLog:
* opcode/arc.h (MAX_INSN_ARGS): Increase 6 to 8.
opcodes/ChangeLog:
* arc-nps400-tbl.h: Add addb, subb, adcb, sbcb, andb, xorb, orb,
fxorb, wxorb, shlb, shrb, notb, cntbb, div, mod, divm, and qcmp
instructions.
* arc-opc.c (insert_nps_bitop_size): Delete.
(extract_nps_bitop_size): Delete.
(MAKE_SRC_POS_INSERT_EXTRACT_FUNCS): Define, and use.
(extract_nps_qcmp_m3): Define.
(extract_nps_qcmp_m2): Define.
(extract_nps_qcmp_m1): Define.
(arc_flag_operands): Add F_NPS_SX, F_NPS_AR, F_NPS_AL.
(arc_flag_classes): Add C_NPS_SX, C_NPS_AR_AL
(arc_operands): Add NPS_SRC2_POS, NPS_SRC1_POS, NPS_ADDB_SIZE,
NPS_ANDB_SIZE, NPS_FXORB_SIZ, NPS_WXORB_SIZ, NPS_R_XLDST,
NPS_DIV_UIMM4, NPS_QCMP_SIZE, NPS_QCMP_M1, NPS_QCMP_M2, and
NPS_QCMP_M3.
|
|
Add dctcp, dcip, dcet, and dcacl instructions.
gas/ChangeLog:
* testsuite/gas/arc/nps400-4.d: New file.
* testsuite/gas/arc/nps400-4.s: New file.
* testsuite/gas/arc/nps400-5.d: New file.
* testsuite/gas/arc/nps400-5.s: New file.
include/ChangeLog:
* opcode/arc.h (insn_class_t): Add NET and ACL class.
opcodes/ChangeLog:
* arc-nps400-tbl.h: Add dctcp, dcip, dcet, and dcacl instructions.
|
|
Add support for arc/nps400 cmem instructions, these load and store
instructions are hard-wired to access "0x57f00000 + 16-bit-offset".
Supporting this relocation required some additions to the arc relocation
handling in the bfd library, as well as the standard changes required to
add a new relocation type.
There's a test of the new instructions in the assembler, and a test of
the relocation in the linker.
bfd/ChangeLog:
* reloc.c: Add BFD_RELOC_ARC_NPS_CMEM16 entry.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-arc.c: Add 'opcode/arc.h' include.
(struct arc_relocation_data): Add symbol_name.
(arc_special_overflow_checks): New function.
(arc_do_relocation): Use arc_special_overflow_checks, reindent as
required, add an extra comment.
(elf_arc_relocate_section): Setup symbol_name in reloc_data.
gas/ChangeLog:
* testsuite/gas/arc/nps400-3.d: New file.
* testsuite/gas/arc/nps400-3.s: New file.
include/ChangeLog:
* elf/arc-reloc.def: Add ARC_NPS_CMEM16 reloc.
* opcode/arc.h (NPS_CMEM_HIGH_VALUE): Define.
ld/ChangeLog:
* testsuite/ld-arc/arc.exp: New file.
* testsuite/ld-arc/nps-1.s: New file.
* testsuite/ld-arc/nps-1a.d: New file.
* testsuite/ld-arc/nps-1b.d: New file.
* testsuite/ld-arc/nps-1b.err: New file.
opcodes/ChangeLog:
* arc-nps400-tbl.h: Add xldb, xldw, xld, xstb, xstw, and xst
instructions.
* arc-opc.c (insert_nps_cmem_uimm16): New function.
(extract_nps_cmem_uimm16): New function.
(arc_operands): Add NPS_XLDST_UIMM16 operand.
|
|
Add some new control instructions to the opcodes library, and a new test
for these new instructions to the assembler. The new instructions use
an instruction flag longer than any seen before (on arc), and so the max
flag length is extended to accommodate this.
gas/ChangeLog:
* config/tc-arc.h (MAX_FLAG_NAME_LENGTH): Increase to 7.
* testsuite/gas/arc/nps400-2.d: New file.
* testsuite/gas/arc/nps400-2.s: New file.
opcodes/ChangeLog:
* arc-nps400-tbl.h: Add schd, sync, and hwschd instructions.
* arc-opc.c (arc_flag_operands): Add new flags.
(arc_flag_classes): Add new classes.
|
|
Adds the movbi, decode1, fbset, fbclear, encode0, encode1, rflt, crc16,
and crc32 instructions for the nps400 arc machine type.
gas/ChangeLog:
* testsuite/gas/arc/nps400-1.d: Update expected results.
* testsuite/gas/arc/nps400-1.s: Additional test cases.
opcodes/ChangeLog:
* arc-nps400-tbl.h: Add movbi, decode1, fbset, fbclear, encode0,
encode1, rflt, crc16, and crc32 instructions.
* arc-opc.c (arc_flag_operands): Add F_NPS_R.
(arc_flag_classes): Add C_NPS_R.
(insert_nps_bitop_size_2b): New function.
(extract_nps_bitop_size_2b): Likewise.
(insert_nps_bitop_uimm8): Likewise.
(extract_nps_bitop_uimm8): Likewise.
(arc_operands): Add new operand entries.
|
|
Add a new comment, and clean up some whitespace issues in the
instruction table.
opcode/ChangeLog:
* arc-nps400-tbl.h: Add a header comment, and fix some whitespace
issues. No functional changes.
|
|
Adds the first few nps400 instructions.
gas/ChangeLog:
* testsuite/gas/arc/nps400-0.d: New file.
* testsuite/gas/arc/nps400-0.s: New file.
* testsuite/gas/arc/nps400-1.d: New file.
* testsuite/gas/arc/nps400-1.s: New file.
include/ChangeLog:
* opcodes/arc.h (insn_class_t): Add BITOP type.
opcodes/ChangeLog:
* arc-nps400-tbl.h: New file.
* arc-opc.c: Add top level comment.
(insert_nps_3bit_dst): New function.
(extract_nps_3bit_dst): New function.
(insert_nps_3bit_src2): New function.
(extract_nps_3bit_src2): New function.
(insert_nps_bitop_size): New function.
(extract_nps_bitop_size): New function.
(arc_flag_operands): Add nps400 entries.
(arc_flag_classes): Add nps400 entries.
(arc_operands): Add nps400 entries.
(arc_opcodes): Add nps400 include.
|
