aboutsummaryrefslogtreecommitdiff
path: root/opcodes/Makefile.am
AgeCommit message (Collapse)AuthorFilesLines
2022-05-05Move TILE-Gx files to TARGET64_LIBOPCODES_CFILESLuis Machado1-3/+3
TILE-Gx is a 64-bit core, so we should include those files in the TARGET64_LIBOPCODES_CFILES as opposed to TARGET32_LIBOPCODES_CFILES.
2022-01-02Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The result of running etc/update-copyright.py --this-year, fixing all the files whose mode is changed by the script, plus a build with --enable-maintainer-mode --enable-cgen-maint=yes, then checking out */po/*.pot which we don't update frequently. The copy of cgen was with commit d1dd5fcc38ead reverted as that commit breaks building of bfp opcodes files.
2021-12-03Revert "Re: Don't compile some opcodes files when bfd is 32-bit only"Alan Modra1-5/+5
This reverts commit 7a53275579e7cec9389ccb924f5ecf69e8d89d41. The bpf sim doesn't work with a 32-bit bfd after all.
2021-11-29opcodes: enable silent build rulesMike Frysinger1-26/+26
Also add $(AM_V_xxx) to various manual rules in here.
2021-11-18Re: Don't compile some opcodes files when bfd is 32-bit onlyAlan Modra1-5/+5
Put bpf back in the 32-bit targets, even though bpf requires a 64-bit bfd. bpf sim support apparently works without being 64-bit. * Makefile.am (TARGET64_LIBOPCODES_CFILES): Move bpf files.. (TARGET32_LIBOPCODES_CFILES): ..to here. * Makefile.in: Regenerate.
2021-11-12Don't compile some opcodes files when bfd is 32-bit onlyAlan Modra1-22/+26
* Makefile.am (TARGET_LIBOPCODES_CFILES): Split into.. (TARGET64_LIBOPCODES_CFILES): ..this and.. (TARGET32_LIBOPCODES_CFILES): ..this. (ALL_MACHINES): Likewise split to (ALL64_MACHINES, ALL32_MACHINES): ..this. * disassemble.c: Define some ARCH_* when ARCH_all only if BFD64. * configure.ac (BFD_MACHINES): Defined depending on BFD_ARCH_SIZE. * Makefile.in: Regenerate. * configure: Regenerate.
2021-10-27opcodes: Fix RPATH not being set for dynamic libbfd dependencyMaciej W. Rozycki1-6/+0
If built as a shared library, libopcodes has a load-time dependency on libbfd, which is recorded in the dynamic section, however without a corresponding RPATH entry for the directory to find libbfd in. This causes loading to fail whenever libbfd is only pulled by libopcodes indirectly and libbfd has been installed in a directory that is not in the dynamic loader's search path. It does not happen with the programs included with binutils or GDB, because they all also pull libbfd when using libopcodes, but it can happen with external software, e.g.: $ gdbserver --help gdbserver: error while loading shared libraries: libbfd-[...].so: cannot open shared object file: No such file or directory $ (not our `gdbserver'). Indirect dynamic dependencies are handled by libtool automatically by adding RPATH entries as required, however our setup for libopcodes prevents this from happening by linking in libbfd with an explicit file reference sneaked through to the linker directly behind libtool's back via the `-Wl' linker command-line option rather than via `-l' combined with a suitable library search path specified via `-L', as it would be usually the case, or just referring to the relevant .la file in a fully libtool-enabled configuration such as ours. According to an observation in the discussion back in 2007[1][2][3] that has led to the current arrangement it is to prevent libtool from picking up the wrong version of libbfd. It does not appear to be needed though, not at least with our current libtool incarnation, as directly referring `libbfd.la' does exactly what it should, as previously suggested[4], and with no link-time reference to the installation directory other than to set RPATH. Uninstalled version of libopcodes has libbfd's build-time location prepended to RPATH too, as also expected. Use a direct reference to `libbfd.la' then, making the load error quoted above go away. Alternatively `-L' and `-l' could be used to the same effect, but it seems an unnecessary complication and just another way to circumvent rather than making use of libtool. References: [1] "compile failure due to undefined symbol", <https://sourceware.org/ml/binutils/2007-08/msg00476.html> [2] same, <https://sourceware.org/ml/binutils/2007-09/msg00000.html> [3] same, <https://sourceware.org/ml/binutils/2007-10/msg00019.html> [4] same, <https://sourceware.org/ml/binutils/2007-10/msg00034.html> opcodes/ * Makefile.am: Remove obsolete comment. * configure.ac: Refer `libbfd.la' to link shared BFD library except for Cygwin. * Makefile.in: Regenerate. * configure: Regenerate.
2021-10-24LoongArch opcodes supportliuzhensong1-0/+3
2021-10-22 Chenghua Xu <xuchenghua@loongson.cn> Zhensong Liu <liuzhensong@loongson.cn> Weinan Liu <liuweinan@loongson.cn> include/ * opcode/loongarch.h: New. * dis-asm.h: Declare print_loongarch_disassembler_options. opcodes/ * Makefile.am: Add LoongArch. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Declare print_insn_loongarch. * loongarch-coder.c: New. * loongarch-dis.c: New. * loongarch-opc.c: New. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate.
2021-07-01cgen: split GUILE setting outMike Frysinger1-1/+2
This makes it easier to override to point to an older version of guile. The current cgen code doesn't work with guile-2, so need to point to an older guile-1.8.
2021-05-24opcodes: cris: move desc & opc files from sim/Mike Frysinger1-1/+14
All other cgen ports keep their generated desc & opc files under opcodes/, so move the cris files over too. The cris-opc.c file, while not generated, is already here to complement.
2021-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2020-03-09x86: Also pass -P to $(CPP) when processing i386-opc.tblH.J. Lu1-1/+1
Since i386-opc.tbl contains '\' to avoid very long lines and i386-gen requires that each instruction must be in one line, also pass -P to $(CPP) to inhibit generation of linemarkers in the output from the preprocessor to support i386-gen. * Makefile.am ($(srcdir)/i386-init.h): Also pass -P to $(CPP). * Makefile.in: Regenerated.
2020-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2019-12-17Remove tic80 supportAlan Modra1-2/+0
This is one way of fixing ubsan bug reports, just delete the code. The assembler support was removed back in 2005 along with other non-BFD assemblers, but somehow the remainder of the port stayed in. bfd/ * coff-tic80.c: Delete file. * cpu-tic80.c: Delete file. * archures.c: Remove tic80 support. * coffcode.h: Likewise. * coffswap.h: Likewise. * targets.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * Makefile.am: Likewise. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/objcopy.exp: Remove tic80 support. * testsuite/binutils-all/objdump.exp: Likewise. gas/ * doc/as.texi: Remove mention of tic80. include/ * coff/tic80.h: Delete file. * opcode/tic80.h: Delete file. ld/ * emulparams/tic80coff.sh: Delete file. * scripttempl/tic80coff.sc: Delete file. * configure.tgt: Remove tic80 support. * Makefile.am: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate. opcodes/ * tic80-dis.c: Delete file. * tic80-opc.c: Delete file. * disassemble.c: Remove tic80 support. * disassemble.h: Likewise. * Makefile.am: Likewise. * configure.ac: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate.
2019-05-23opcodes: add support for eBPFJose E. Marchesi1-0/+17
This patch adds support for the Linux kernel eBPF architecture to the opcodes. The port is based on CGEN. opcodes/ChangeLog: 2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com> * configure.ac (SHARED_DEPENDENCIES): Add case for bfd_bpf_arch. * configure: Regenerated. * Makefile.am: Add rules for the files generated from cpu/bpf.cpu and cpu/bpf.opc. (HFILES): Add bpf-desc.h and bpf-opc.h. (TARGET_LIBOPCODES_CFILES): Add bpf-asm.c, bpf-desc.c, bpf-dis.c, bpf-ibld.c and bpf-opc.c. (BPF_DEPS): Define. * Makefile.in: Regenerated. * disassemble.c (ARCH_bpf): Define. (disassembler): Add case for bfd_arch_bpf. (disassemble_init_for_target): Likewise. (enum epbf_isa_attr): Define. * disassemble.h: extern print_insn_bpf. * bpf-asm.c: Generated. * bpf-opc.h: Likewise. * bpf-opc.c: Likewise. * bpf-ibld.c: Likewise. * bpf-dis.c: Likewise. * bpf-desc.h: Likewise. * bpf-desc.c: Likewise.
2019-01-03S12Z: opcodes: Separate the decoding of operations from their display.John Darrington1-0/+1
This change adds an abstraction layer between the decoding of machine operations and their disassembled textual representation. This allows the decoding routines to be re-used for other purposes (at the expense) of slightly slower running time. ChangeLog: opcodes/ * s12z-opc.c: New file. * s12z-opc.h: New file. * s12z-dis.c: Removed all code not directly related to display of instructions. Used the interface provided by the new files instead. * Makefile.am (TARGET_LIBOPCODES_CFILES) Add s12z-opc.c. * Makefile.in: regenerate. * configure.ac (bfd_s12z_arch): Correct the dependencies. * configure: regenerate.
2019-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2018-09-21csky-opc.h: Initialize fields of last array elementsSimon Marchi1-1/+0
clang gives these errors: In file included from /Users/simark/src/binutils-gdb/opcodes/csky-dis.c:30: /Users/simark/src/binutils-gdb/opcodes/csky-opc.h:2330:8: error: missing field 'transfer' initializer [-Werror,-Wmissing-field-initializers] {NULL} ^ /Users/simark/src/binutils-gdb/opcodes/csky-opc.h:8126:10: error: missing field 'transfer' initializer [-Werror,-Wmissing-field-initializers] {NULL} ^ They go away when we Initialize all fields. I noticed there used to be some files built with -Wno-missing-field-initializers, but it's not the case anymore, since commit e7ae278d0474ab84ba3b1ee932a19e83616ddacc. There is still a NO_WMISSING_FIELD_INITIALIZERS variable defined in the Makefile, but it's unused, so I removed it to avoid further confusion. opcodes/ChangeLog: * Makefile.am: Remove NO_WMISSING_FIELD_INITIALIZERS. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * configure.ac: Remove check for -Wno-missing-field-initializers. * csky-opc.h (csky_v1_opcodes): Initialize all fields of last element. (csky_v2_opcodes): Likewise.
2018-07-30Add support for the C_SKY series of processors.Andrew Jenner1-0/+1
This patch series is a new binutils port for C-SKY processors, including support for both the V1 and V2 processor variants. V1 is derived from the MCore architecture while V2 is substantially different, with mixed 16- and 32-bit instructions, a larger register set, a different (but overlapping) ABI, etc. There is support for bare-metal ELF targets and Linux with both glibc and uClibc. This code is being contributed jointly by C-SKY Microsystems and Mentor Graphics. C-SKY is responsible for the technical content and has proposed Lifang Xia and Yunhai Shang as port maintainers. (Note that C-SKY does have a corporate copyright assignment on file with the FSF.) Mentor Graphics' role has been cleaning up the code, adding documentation and additional test cases, etc, to address issues we anticipated reviewers would complain about. bfd * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES): Add C-SKY. (BFD32_BACKENDS, BFD_BACKENDS_CFILES): Likewise. * Makefile.in: Regenerated. * archures.c (enum bfd_architecture): Add bfd_arch_csky and related bfd_mach defines. (bfd_csky_arch): Declare. (bfd_archures_list): Add C-SKY. * bfd-in.h (elf32_csky_build_stubs): Declare. (elf32_csky_size_stubs): Declare. (elf32_csky_next_input_section: Declare. (elf32_csky_setup_section_lists): Declare. * bfd-in2.h: Regenerated. * config.bfd: Add C-SKY. * configure.ac: Likewise. * configure: Regenerated. * cpu-csky.c: New file. * elf-bfd.h (enum elf_target_id): Add C-SKY. * elf32-csky.c: New file. * libbfd.h: Regenerated. * reloc.c: Add C-SKY relocations. * targets.c (csky_elf32_be_vec, csky_elf32_le_vec): Declare. (_bfd_target_vector): Add C-SKY target vector entries. binutils* readelf.c: Include elf/csky.h. (guess_is_rela): Handle EM_CSKY. (dump_relocations): Likewise. (get_machine_name): Likewise. (is_32bit_abs_reloc): Likewise. include * dis-asm.h (csky_symbol_is_valid): Declare. * opcode/csky.h: New file. opcodes * Makefile.am (TARGET_LIBOPCODES_CFILES): Add csky-dis.c. * Makefile.in: Regenerated. * configure.ac: Add C-SKY. * configure: Regenerated. * csky-dis.c: New file. * csky-opc.h: New file. * disassemble.c (ARCH_csky): Define. (disassembler, disassemble_init_for_target): Add case for ARCH_csky. * disassemble.h (print_insn_csky, csky_get_disassembler): Declare. gas * Makefile.am (TARGET_CPU_CFILES): Add entry for C-SKY. (TARGET_CPU_HFILES, TARGET_ENV_HFILES): Likewise. * Makefile.in: Regenerated. * config/tc-csky.c: New file. * config/tc-csky.h: New file. * config/te-csky_abiv1.h: New file. * config/te-csky_abiv1_linux.h: New file. * config/te-csky_abiv2.h: New file. * config/te-csky_abiv2_linux.h: New file. * configure.tgt: Add C-SKY. * doc/Makefile.am (CPU_DOCS): Add entry for C-SKY. * doc/Makefile.in: Regenerated. * doc/all.texi: Set CSKY feature. * doc/as.texi (Overview): Add C-SKY options. (Machine Dependencies): Likewise. * doc/c-csky.texi: New file. * testsuite/gas/csky/*: New test cases. ld * Makefile.am (ALL_EMULATION_SOURCES): Add C-SKY emulations. (ecskyelf.c, ecskyelf_linux.c): New rules. * Makefile.in: Regenerated. * configure.tgt: Add C-SKY. * emulparams/cskyelf.sh: New file. * emulparams/cskyelf_linux.sh: New file. * emultempl/cskyelf.em: New file. * gen-doc.texi: Add C-SKY. * ld.texi: Likewise. (Options specific to C-SKY targets): New section. * testsuite/ld-csky/*: New tests.
2018-07-19x86: pre-process opcodes table before parsingJan Beulich1-2/+4
Instead of expanding macro-like constructs in i386-gen, have the C pre- processor do this for us. Besides being a prerequisite for the next template folding steps, this also paves the way for removing various hidden dependencies between #define-s in i386-opc.h and plain literal numbers used in i386-opc.tbl. The #undef of None is solely to leave the generated i386-tbl.h entirely unchanged.
2018-06-19Bump to autoconf 2.69 and automake 1.15.1Simon Marchi1-1/+1
When trying to run the update-gnulib.sh script in gdb, I get this: Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1. Aborting. Apparently, it's an issue with a regex in automake that triggers a warning starting with Perl 5.22. It has been fixed in automake 1.15.1. So I think it's a good excuse to bump the versions of autoconf and automake used in the gnulib import. And to avoid requiring multiple builds of autoconf/automake, it was suggested that we bump the required version of those tools for all binutils-gdb. For autoconf, the 2.69 version is universally available, so it's an easy choice. For automake, different distros and distro versions have different automake versions. But 1.15.1 seems to be the most readily available as a package. In any case, it's easy to build it from source. I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ, because I don't think they are useful in our case. They only specify a lower bound for the acceptable version of automake/autoconf. That's useful if you let the user choose the version of the tool they want to use, but want to set a minimum version (because you use a feature that was introduced in that version). In our case, we force people to use a specific version anyway. For the autoconf version, we have the check in config/override.m4 that enforces the version we want. It will be one less thing to update next time we change autotools version. I hit a few categories of problems that required some changes. They are described below along with the chosen solutions. Problem 1: configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation Solution 1: Adjust the code based on the example at that URL. Problem 2 (in zlib/): Makefile.am: error: required file './INSTALL' not found Makefile.am: 'automake --add-missing' can install 'INSTALL' Makefile.am: error: required file './NEWS' not found Makefile.am: error: required file './AUTHORS' not found Makefile.am: error: required file './COPYING' not found Makefile.am: 'automake --add-missing' can install 'COPYING' Solution 2: Add the foreign option to AUTOMAKE_OPTIONS. Problem 3: doc/Makefile.am:20: error: support for Cygnus-style trees has been removed Solution 3: Remove the cygnus options. Problem 4: Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') Solution 4: Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is already defined earlier). Problem 5: doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 5: Rename .texinfo files to .texi. Problem 6: doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 6: Remove the hack at the bottom of doc/Makefile.am and use the info-in-builddir automake option. Problem 7: doc/Makefile.am:35: error: required file '../texinfo.tex' not found doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex' Solution 7: Use the no-texinfo.tex automake option. We also have one in texinfo/texinfo.tex, not sure if we should point to that, or move it (or a newer version of it added with automake --add-missing) to top-level. Problem 8: Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory, Makefile.am:131: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. Solution 8: Use subdir-objects, that means adjusting references to some .o that will now be in config/. Problem 9: configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... ../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from... ../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from... ../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from... ../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from... configure.ac:375: the top level Solution 9: Use AC_LANG_SOURCE, or use proper quoting. Problem 10 (in intl/): configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS /usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from... /usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from... /usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from... /usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from... /usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from... /usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from... /usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from... configure.ac:7: the top level Solution 10: Add AC_USE_SYSTEM_EXTENSIONS in configure.ac. ChangeLog: * libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * README-maintainer-mode: Update version requirements. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. bfd/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. (INCLUDES): Rename to ... (AM_CPPFLAGS): ... this. * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add info-in-builddir no-texinfo.tex. (info_TEXINFOS): Rename bfd.texinfo to bfd.texi. * doc/bfd.texinfo: Rename to ... * doc/bfd.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. binutils/ChangeLog: * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add info-in-builddir no-texinfo.tex. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. config/ChangeLog: * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. etc/ChangeLog: * configure.in: Remove AC_PREREQ. * configure: Re-generate. gas/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects. (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix. * configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles, extra_objects): Add config/ prefix. * doc/as.texinfo: Rename to... * doc/as.texi: ... this. * doc/Makefile.am: Rename as.texinfo to as.texi throughout. Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gdb/ChangeLog: * common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION, PACKAGE_STRING, PACKAGE_TARNAME): Undefine. * configure.ac: Remove AC_PREREQ, add missing quoting. * gnulib/configure.ac: Modernize usage of AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ. * gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69. (AUTOMAKE_VERSION): Bump to 1.15.1. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. * gnulib/aclocal.m4: Re-generate. * gnulib/config.in: Re-generate. * gnulib/configure: Re-generate. * gnulib/import/Makefile.in: Re-generate. gdb/gdbserver/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. gdb/testsuite/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. gold/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting and usage of AC_LANG_SOURCE. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * testsuite/Makefile.in: Re-generate. gprof/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * gconfig.in: Re-generate. intl/ChangeLog: * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. ld/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. (AUTOMAKE_OPTIONS): Add info-in-builddir. * README: Rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. * gen-doc.texi: Likewise. * h8-doc.texi: Likewise. * ld.texinfo: Rename to ... * ld.texi: ... this. * ldint.texinfo: Rename to ... * ldint.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. libdecnumber/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libiberty/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. opcodes/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. * configure.ac: Remove AC_PREREQ. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. readline/ChangeLog.gdb: * configure: Re-generate. * examples/rlfe/configure: Re-generate. sim/ChangeLog: * All configure.ac: Remove AC_PREREQ. * All configure: Re-generate. zlib/ChangeLog.bin-gdb: * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate.
2018-05-18Add support for the Freescale s12z processor.John Darrington1-0/+1
bfd * Makefile.am: Add s12z files. * Makefile.in: Regenerate. * archures.c: Add bfd_s12z_arch. * bfd-in.h: Add exports of bfd_putb24 and bfd_putl24. * bfd-in2.h: Regenerate. * config.bfd: Add s12z target. * configure.ac: Add s12z target. * configure: Regenerate. * cpu-s12z.c: New file. * elf32-s12z.c: New file. * libbfd.c (bfd_putb24): New function. (bfd_putl24): New function. * libbfd.h: Regenerate. * reloc.c: Add s12z relocations. (bfd_get_reloc_size): Handle size 5 relocs. * targets.c: Add s12z_elf32_vec. opcodes * Makefile.am: Add support for s12z architecture. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * s12z-dis.c: New file. * s12z.h: New file. include * elf/s12z.h: New header. ld * Makefile.am: Add support for s12z architecture. * configure.tgt: Likewise. * Makefile.in: Regenerate. * emulparams/m9s12zelf.sh: New file. * scripttempl/elfm9s12z.sc: New file. * testsuite/ld-discard/static.d: Expect to fail for the s12z target. * testsuite/ld-elf/endsym.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/pr14926.d: Skip for the s12z target. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-s12z: New directory. * testsuite/ld-s12z/opr-linking.d: New file. * testsuite/ld-s12z/opr-linking.s: New file. * testsuite/ld-s12z/relative-linking.d: New file. * testsuite/ld-s12z/relative-linking.s: New file. * testsuite/ld-s12z/z12s.exp: New file. gas * Makefile.am: Add support for s12z target. * Makefile.in: Regenerate. * NEWS: Mention the new support. * config/tc-s12z.c: New file. * config/tc-s12z.h: New file. * configure.tgt: Add s12z support. * doc/Makefile.am: Likewise. * doc/Makefile.in: Regenerate. * doc/all.texi: Add s12z documentation. * doc/as.textinfo: Likewise. * doc/c-s12z.texi: New file. * testsuite/gas/s12z: New directory. * testsuite/gas/s12z/abs.d: New file. * testsuite/gas/s12z/abs.s: New file. * testsuite/gas/s12z/adc-imm.d: New file. * testsuite/gas/s12z/adc-imm.s: New file. * testsuite/gas/s12z/adc-opr.d: New file. * testsuite/gas/s12z/adc-opr.s: New file. * testsuite/gas/s12z/add-imm.d: New file. * testsuite/gas/s12z/add-imm.s: New file. * testsuite/gas/s12z/add-opr.d: New file. * testsuite/gas/s12z/add-opr.s: New file. * testsuite/gas/s12z/and-imm.d: New file. * testsuite/gas/s12z/and-imm.s: New file. * testsuite/gas/s12z/and-opr.d: New file. * testsuite/gas/s12z/and-opr.s: New file. * testsuite/gas/s12z/and-or-cc.d: New file. * testsuite/gas/s12z/and-or-cc.s: New file. * testsuite/gas/s12z/bfext-special.d: New file. * testsuite/gas/s12z/bfext-special.s: New file. * testsuite/gas/s12z/bfext.d: New file. * testsuite/gas/s12z/bfext.s: New file. * testsuite/gas/s12z/bit-manip.d: New file. * testsuite/gas/s12z/bit-manip.s: New file. * testsuite/gas/s12z/bit.d: New file. * testsuite/gas/s12z/bit.s: New file. * testsuite/gas/s12z/bra-expression-defined.d: New file. * testsuite/gas/s12z/bra-expression-defined.s: New file. * testsuite/gas/s12z/bra-expression-undef.d: New file. * testsuite/gas/s12z/bra-expression-undef.s: New file. * testsuite/gas/s12z/bra.d: New file. * testsuite/gas/s12z/bra.s: New file. * testsuite/gas/s12z/brclr-symbols.d: New file. * testsuite/gas/s12z/brclr-symbols.s: New file. * testsuite/gas/s12z/brset-clr-opr-imm-rel.d: New file. * testsuite/gas/s12z/brset-clr-opr-imm-rel.s: New file. * testsuite/gas/s12z/brset-clr-opr-reg-rel.d: New file. * testsuite/gas/s12z/brset-clr-opr-reg-rel.s: New file. * testsuite/gas/s12z/brset-clr-reg-imm-rel.d: New file. * testsuite/gas/s12z/brset-clr-reg-imm-rel.s: New file. * testsuite/gas/s12z/brset-clr-reg-reg-rel.d: New file. * testsuite/gas/s12z/brset-clr-reg-reg-rel.s: New file. * testsuite/gas/s12z/clb.d: New file. * testsuite/gas/s12z/clb.s: New file. * testsuite/gas/s12z/clr-opr.d: New file. * testsuite/gas/s12z/clr-opr.s: New file. * testsuite/gas/s12z/clr.d: New file. * testsuite/gas/s12z/clr.s: New file. * testsuite/gas/s12z/cmp-imm.d: New file. * testsuite/gas/s12z/cmp-imm.s: New file. * testsuite/gas/s12z/cmp-opr-inc.d: New file. * testsuite/gas/s12z/cmp-opr-inc.s: New file. * testsuite/gas/s12z/cmp-opr-rdirect.d: New file. * testsuite/gas/s12z/cmp-opr-rdirect.s: New file. * testsuite/gas/s12z/cmp-opr-reg.d: New file. * testsuite/gas/s12z/cmp-opr-reg.s: New file. * testsuite/gas/s12z/cmp-opr-rindirect.d: New file. * testsuite/gas/s12z/cmp-opr-rindirect.s: New file. * testsuite/gas/s12z/cmp-opr-sxe4.d: New file. * testsuite/gas/s12z/cmp-opr-sxe4.s: New file. * testsuite/gas/s12z/cmp-opr-xys.d: New file. * testsuite/gas/s12z/cmp-opr-xys.s: New file. * testsuite/gas/s12z/cmp-s-imm.d: New file. * testsuite/gas/s12z/cmp-s-imm.s: New file. * testsuite/gas/s12z/cmp-s-opr.d: New file. * testsuite/gas/s12z/cmp-s-opr.s: New file. * testsuite/gas/s12z/cmp-xy.d: New file. * testsuite/gas/s12z/cmp-xy.s: New file. * testsuite/gas/s12z/com-opr.d: New file. * testsuite/gas/s12z/com-opr.s: New file. * testsuite/gas/s12z/complex-shifts.d: New file. * testsuite/gas/s12z/complex-shifts.s: New file. * testsuite/gas/s12z/db-tb-cc-opr.d: New file. * testsuite/gas/s12z/db-tb-cc-opr.s: New file. * testsuite/gas/s12z/db-tb-cc-reg.d: New file. * testsuite/gas/s12z/db-tb-cc-reg.s: New file. * testsuite/gas/s12z/dbCC.d: New file. * testsuite/gas/s12z/dbCC.s: New file. * testsuite/gas/s12z/dec-opr.d: New file. * testsuite/gas/s12z/dec-opr.s: New file. * testsuite/gas/s12z/dec.d: New file. * testsuite/gas/s12z/dec.s: New file. * testsuite/gas/s12z/div.d: New file. * testsuite/gas/s12z/div.s: New file. * testsuite/gas/s12z/eor.d: New file. * testsuite/gas/s12z/eor.s: New file. * testsuite/gas/s12z/exg.d: New file. * testsuite/gas/s12z/exg.s: New file. * testsuite/gas/s12z/ext24-ld-xy.d: New file. * testsuite/gas/s12z/ext24-ld-xy.s: New file. * testsuite/gas/s12z/inc-opr.d: New file. * testsuite/gas/s12z/inc-opr.s: New file. * testsuite/gas/s12z/inc.d: New file. * testsuite/gas/s12z/inc.s: New file. * testsuite/gas/s12z/inh.d: New file. * testsuite/gas/s12z/inh.s: New file. * testsuite/gas/s12z/jmp.d: New file. * testsuite/gas/s12z/jmp.s: New file. * testsuite/gas/s12z/jsr.d: New file. * testsuite/gas/s12z/jsr.s: New file. * testsuite/gas/s12z/ld-imm-page2.d: New file. * testsuite/gas/s12z/ld-imm-page2.s: New file. * testsuite/gas/s12z/ld-imm.d: New file. * testsuite/gas/s12z/ld-imm.s: New file. * testsuite/gas/s12z/ld-immu18.d: New file. * testsuite/gas/s12z/ld-immu18.s: New file. * testsuite/gas/s12z/ld-large-direct.d: New file. * testsuite/gas/s12z/ld-large-direct.s: New file. * testsuite/gas/s12z/ld-opr.d: New file. * testsuite/gas/s12z/ld-opr.s: New file. * testsuite/gas/s12z/ld-s-opr.d: New file. * testsuite/gas/s12z/ld-s-opr.s: New file. * testsuite/gas/s12z/ld-small-direct.d: New file. * testsuite/gas/s12z/ld-small-direct.s: New file. * testsuite/gas/s12z/lea-immu18.d: New file. * testsuite/gas/s12z/lea-immu18.s: New file. * testsuite/gas/s12z/lea.d: New file. * testsuite/gas/s12z/lea.s: New file. * testsuite/gas/s12z/mac.d: New file. * testsuite/gas/s12z/mac.s: New file. * testsuite/gas/s12z/min-max.d: New file. * testsuite/gas/s12z/min-max.s: New file. * testsuite/gas/s12z/mod.d: New file. * testsuite/gas/s12z/mod.s: New file. * testsuite/gas/s12z/mov.d: New file. * testsuite/gas/s12z/mov.s: New file. * testsuite/gas/s12z/mul-imm.d: New file. * testsuite/gas/s12z/mul-imm.s: New file. * testsuite/gas/s12z/mul-opr-opr.d: New file. * testsuite/gas/s12z/mul-opr-opr.s: New file. * testsuite/gas/s12z/mul-opr.d: New file. * testsuite/gas/s12z/mul-opr.s: New file. * testsuite/gas/s12z/mul-reg.d: New file. * testsuite/gas/s12z/mul-reg.s: New file. * testsuite/gas/s12z/mul.d: New file. * testsuite/gas/s12z/mul.s: New file. * testsuite/gas/s12z/neg-opr.d: New file. * testsuite/gas/s12z/neg-opr.s: New file. * testsuite/gas/s12z/not-so-simple-shifts.d: New file. * testsuite/gas/s12z/not-so-simple-shifts.s: New file. * testsuite/gas/s12z/opr-18u.d: New file. * testsuite/gas/s12z/opr-18u.s: New file. * testsuite/gas/s12z/opr-expr.d: New file. * testsuite/gas/s12z/opr-expr.s: New file. * testsuite/gas/s12z/opr-ext-18.d: New file. * testsuite/gas/s12z/opr-ext-18.s: New file. * testsuite/gas/s12z/opr-idx-24-reg.d: New file. * testsuite/gas/s12z/opr-idx-24-reg.s: New file. * testsuite/gas/s12z/opr-idx3-reg.d: New file. * testsuite/gas/s12z/opr-idx3-reg.s: New file. * testsuite/gas/s12z/opr-idx3-xysp-24.d: New file. * testsuite/gas/s12z/opr-idx3-xysp-24.s: New file. * testsuite/gas/s12z/opr-indirect-expr.d: New file. * testsuite/gas/s12z/opr-indirect-expr.s: New file. * testsuite/gas/s12z/opr-symbol.d: New file. * testsuite/gas/s12z/opr-symbol.s: New file. * testsuite/gas/s12z/or-imm.d: New file. * testsuite/gas/s12z/or-imm.s: New file. * testsuite/gas/s12z/or-opr.d: New file. * testsuite/gas/s12z/or-opr.s: New file. * testsuite/gas/s12z/p2-mul.d: New file. * testsuite/gas/s12z/p2-mul.s: New file. * testsuite/gas/s12z/page2-inh.d: New file. * testsuite/gas/s12z/page2-inh.s: New file. * testsuite/gas/s12z/psh-pul.d: New file. * testsuite/gas/s12z/psh-pul.s: New file. * testsuite/gas/s12z/qmul.d: New file. * testsuite/gas/s12z/qmul.s: New file. * testsuite/gas/s12z/rotate.d: New file. * testsuite/gas/s12z/rotate.s: New file. * testsuite/gas/s12z/s12z.exp: New file. * testsuite/gas/s12z/sat.d: New file. * testsuite/gas/s12z/sat.s: New file. * testsuite/gas/s12z/sbc-imm.d: New file. * testsuite/gas/s12z/sbc-imm.s: New file. * testsuite/gas/s12z/sbc-opr.d: New file. * testsuite/gas/s12z/sbc-opr.s: New file. * testsuite/gas/s12z/shift.d: New file. * testsuite/gas/s12z/shift.s: New file. * testsuite/gas/s12z/simple-shift.d: New file. * testsuite/gas/s12z/simple-shift.s: New file. * testsuite/gas/s12z/single-ops.d: New file. * testsuite/gas/s12z/single-ops.s: New file. * testsuite/gas/s12z/specd6.d: New file. * testsuite/gas/s12z/specd6.s: New file. * testsuite/gas/s12z/st-large-direct.d: New file. * testsuite/gas/s12z/st-large-direct.s: New file. * testsuite/gas/s12z/st-opr.d: New file. * testsuite/gas/s12z/st-opr.s: New file. * testsuite/gas/s12z/st-s-opr.d: New file. * testsuite/gas/s12z/st-s-opr.s: New file. * testsuite/gas/s12z/st-small-direct.d: New file. * testsuite/gas/s12z/st-small-direct.s: New file. * testsuite/gas/s12z/st-xy.d: New file. * testsuite/gas/s12z/st-xy.s: New file. * testsuite/gas/s12z/sub-imm.d: New file. * testsuite/gas/s12z/sub-imm.s: New file. * testsuite/gas/s12z/sub-opr.d: New file. * testsuite/gas/s12z/sub-opr.s: New file. * testsuite/gas/s12z/tfr.d: New file. * testsuite/gas/s12z/tfr.s: New file. * testsuite/gas/s12z/trap.d: New file. * testsuite/gas/s12z/trap.s: New file. binutils* readelf.c: Add support for s12z architecture. * testsuite/lib/binutils-common.exp (is_elf_format): Excluse s12z targets.
2018-04-30This patch adds support to objdump for disassembly of NFP (Netronome Flow ↵Francois H. Theron1-0/+1
Processor) ELF files (.nffw) as well as some basic readelf support. bfd * Makefile.am: Added NFP files to build. * archures.c: Added bfd_arch_nfp * config.bfd: Added NFP support. * configure.ac: Added NFP support. * cpu-nfp.c: New, for NFP support. * elf-bfd.h: Added elf_section_info() * elf64-nfp.c: New, for NFP support. * po/SRC-POTFILES.in: Added NFP source files. * targets.c: Added nfp_elf64_vec * bfd-in2.h: Regenerate. * Makefile.in: Regenerate. * configure: Regenerate. binutils* readelf.c: Very basic support for EM_NFP and its section types. * testsuite/binutils-all/nfp: New directory. * testsuite/binutils-all/nfp/objdump.exp: New file. Run new tests. * testsuite/binutils-all/nfp/test2_ctx8.d: New file. * testsuite/binutils-all/nfp/test2_no-pc_ctx4.d: New file. * testsuite/binutils-all/nfp/test1.d: New file. * testsuite/binutils-all/nfp/nfp6000.nffw: New file. * testsuite/binutils-all/nfp/test2_nfp6000.nffw: New file. * NEWS: Mention the new support. include * dis-asm.h: Added print_nfp_disassembler_options prototype. * elf/common.h: Added EM_NFP, officially assigned. See Google Group Generic System V Application Binary Interface. * elf/nfp.h: New, for NFP support. * opcode/nfp.h: New, for NFP support. opcodes Makefile.am: Added nfp-dis.c. configure.ac: Added bfd_nfp_arch. disassemble.h: Added print_insn_nfp prototype. disassemble.c: Added ARCH_nfp and call to print_insn_nfp nfp-dis.c: New, for NFP support. po/POTFILES.in: Added nfp-dis.c to the list. Makefile.in: Regenerate. configure: Regenerate.
2018-04-16Remove sh5 and sh64 supportAlan Modra1-3/+0
include/ * dis-asm.h: Remove sh5 and sh64 support. bfd/ * Makefile.am: Remove sh5 and sh64 support. * archures.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * cpu-sh.c: Likewise. * elf32-sh-relocs.h: Likewise. * elf32-sh.c: Likewise. * targets.c: Likewise. * elf32-sh64-com.c: Delete. * elf32-sh64.c: Delete. * elf32-sh64.h: Delete. * elf64-sh64.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove sh5 and sh64 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * sh-dis.c: Likewise. * sh64-dis.c: Delete. * sh64-opc.c: Delete. * sh64-opc.h: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. bintuils/ * testsuite/binutils-all/objcopy.exp: Remove sh5 and sh64 support. gas/ * Makefile.am: Remove sh5 and sh64 support. * config/tc-sh.c: Likewise. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/as.texinfo: Likewise. * testsuite/gas/cfi/cfi.exp: Likewise. * testsuite/gas/sh/basic.exp: Likewise. * config/tc-sh64.c: Delete. * config/tc-sh64.h: Delete. * doc/c-sh64.texi: Delete. * testsuite/gas/sh/sh64/abi-32.d: Delete. * testsuite/gas/sh/sh64/abi-32.s: Delete. * testsuite/gas/sh/sh64/abi-64.d: Delete. * testsuite/gas/sh/sh64/abi-64.s: Delete. * testsuite/gas/sh/sh64/basic-1.d: Delete. * testsuite/gas/sh/sh64/basic-1.s: Delete. * testsuite/gas/sh/sh64/case-1.d: Delete. * testsuite/gas/sh/sh64/case-1.s: Delete. * testsuite/gas/sh/sh64/case-noexp-1.d: Delete. * testsuite/gas/sh/sh64/crange1-1.d: Delete. * testsuite/gas/sh/sh64/crange1-2.d: Delete. * testsuite/gas/sh/sh64/crange1.s: Delete. * testsuite/gas/sh/sh64/crange2-1.d: Delete. * testsuite/gas/sh/sh64/crange2-2.d: Delete. * testsuite/gas/sh/sh64/crange2-noexp-1.d: Delete. * testsuite/gas/sh/sh64/crange2.s: Delete. * testsuite/gas/sh/sh64/crange3-1.d: Delete. * testsuite/gas/sh/sh64/crange3.s: Delete. * testsuite/gas/sh/sh64/crange4-1.d: Delete. * testsuite/gas/sh/sh64/crange4.s: Delete. * testsuite/gas/sh/sh64/crange5-1.d: Delete. * testsuite/gas/sh/sh64/crange5.s: Delete. * testsuite/gas/sh/sh64/creg-1.d: Delete. * testsuite/gas/sh/sh64/creg-1.s: Delete. * testsuite/gas/sh/sh64/creg-2.d: Delete. * testsuite/gas/sh/sh64/creg-2.s: Delete. * testsuite/gas/sh/sh64/datal-1.s: Delete. * testsuite/gas/sh/sh64/datal-2.d: Delete. * testsuite/gas/sh/sh64/datal-2.s: Delete. * testsuite/gas/sh/sh64/datal-3.s: Delete. * testsuite/gas/sh/sh64/datal32-1.d: Delete. * testsuite/gas/sh/sh64/datal32-3.d: Delete. * testsuite/gas/sh/sh64/datal64-1.d: Delete. * testsuite/gas/sh/sh64/datal64-3.d: Delete. * testsuite/gas/sh/sh64/eh-1.d: Delete. * testsuite/gas/sh/sh64/eh-1.s: Delete. * testsuite/gas/sh/sh64/endian-1.d: Delete. * testsuite/gas/sh/sh64/endian-1.s: Delete. * testsuite/gas/sh/sh64/endian-2.d: Delete. * testsuite/gas/sh/sh64/endian-2.s: Delete. * testsuite/gas/sh/sh64/err-1.s: Delete. * testsuite/gas/sh/sh64/err-2.s: Delete. * testsuite/gas/sh/sh64/err-3.s: Delete. * testsuite/gas/sh/sh64/err-4.s: Delete. * testsuite/gas/sh/sh64/err-abi-32.s: Delete. * testsuite/gas/sh/sh64/err-abi-64.s: Delete. * testsuite/gas/sh/sh64/err-dsp.s: Delete. * testsuite/gas/sh/sh64/err-movi-noexp-1.s: Delete. * testsuite/gas/sh/sh64/err-noexp-cmd1.s: Delete. * testsuite/gas/sh/sh64/err-pt-1.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd1.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd2.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd3.s: Delete. * testsuite/gas/sh/sh64/err-ptb-1.s: Delete. * testsuite/gas/sh/sh64/err-ptb-2.s: Delete. * testsuite/gas/sh/sh64/err.exp: Delete. * testsuite/gas/sh/sh64/immexpr1.s: Delete. * testsuite/gas/sh/sh64/immexpr2.s: Delete. * testsuite/gas/sh/sh64/immexpr32-1.d: Delete. * testsuite/gas/sh/sh64/immexpr32-2.d: Delete. * testsuite/gas/sh/sh64/immexpr64-1.d: Delete. * testsuite/gas/sh/sh64/immexpr64-2.d: Delete. * testsuite/gas/sh/sh64/lineno.d: Delete. * testsuite/gas/sh/sh64/lineno.s: Delete. * testsuite/gas/sh/sh64/localcom-1.d: Delete. * testsuite/gas/sh/sh64/localcom-1.s: Delete. * testsuite/gas/sh/sh64/mix-1.d: Delete. * testsuite/gas/sh/sh64/mix-1.s: Delete. * testsuite/gas/sh/sh64/mix-noexp-1.d: Delete. * testsuite/gas/sh/sh64/movi-1.s: Delete. * testsuite/gas/sh/sh64/movi-2.s: Delete. * testsuite/gas/sh/sh64/movi-3.d: Delete. * testsuite/gas/sh/sh64/movi-3.s: Delete. * testsuite/gas/sh/sh64/movi32-1.d: Delete. * testsuite/gas/sh/sh64/movi32-2.d: Delete. * testsuite/gas/sh/sh64/movi32-noexp-2.d: Delete. * testsuite/gas/sh/sh64/movi64-1.d: Delete. * testsuite/gas/sh/sh64/movi64-2.d: Delete. * testsuite/gas/sh/sh64/movi64-2.s: Delete. * testsuite/gas/sh/sh64/movi64-3.d: Delete. * testsuite/gas/sh/sh64/movi64-noexp-2.d: Delete. * testsuite/gas/sh/sh64/pt-1.d: Delete. * testsuite/gas/sh/sh64/pt-1.s: Delete. * testsuite/gas/sh/sh64/pt-2.s: Delete. * testsuite/gas/sh/sh64/pt-noexp-1.d: Delete. * testsuite/gas/sh/sh64/pt32-1.d: Delete. * testsuite/gas/sh/sh64/pt32-noexp-2.d: Delete. * testsuite/gas/sh/sh64/pt64-1.d: Delete. * testsuite/gas/sh/sh64/pt64-32-1.d: Delete. * testsuite/gas/sh/sh64/pt64-32-2.d: Delete. * testsuite/gas/sh/sh64/pt64-noexp-2.d: Delete. * testsuite/gas/sh/sh64/ptc-1.s: Delete. * testsuite/gas/sh/sh64/ptc32-1.d: Delete. * testsuite/gas/sh/sh64/ptc32-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-32-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptext-1.s: Delete. * testsuite/gas/sh/sh64/ptext32-1.d: Delete. * testsuite/gas/sh/sh64/ptext32-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-32-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-noexp-1.d: Delete. * testsuite/gas/sh/sh64/rel-1.s: Delete. * testsuite/gas/sh/sh64/rel-2.s: Delete. * testsuite/gas/sh/sh64/rel-3.s: Delete. * testsuite/gas/sh/sh64/rel-4.s: Delete. * testsuite/gas/sh/sh64/rel-5.s: Delete. * testsuite/gas/sh/sh64/rel32-1.d: Delete. * testsuite/gas/sh/sh64/rel32-2.d: Delete. * testsuite/gas/sh/sh64/rel32-3.d: Delete. * testsuite/gas/sh/sh64/rel32-4.d: Delete. * testsuite/gas/sh/sh64/rel32-5.d: Delete. * testsuite/gas/sh/sh64/rel64-1.d: Delete. * testsuite/gas/sh/sh64/rel64-2.d: Delete. * testsuite/gas/sh/sh64/rel64-3.d: Delete. * testsuite/gas/sh/sh64/rel64-4.d: Delete. * testsuite/gas/sh/sh64/rel64-5.d: Delete. * testsuite/gas/sh/sh64/relax-1.d: Delete. * testsuite/gas/sh/sh64/relax-1.s: Delete. * testsuite/gas/sh/sh64/relax-2.d: Delete. * testsuite/gas/sh/sh64/relax-2.s: Delete. * testsuite/gas/sh/sh64/relax-3.d: Delete. * testsuite/gas/sh/sh64/relax-3.s: Delete. * testsuite/gas/sh/sh64/sh64.exp: Delete. * testsuite/gas/sh/sh64/shift-1.s: Delete. * testsuite/gas/sh/sh64/shift-2.s: Delete. * testsuite/gas/sh/sh64/shift-3.s: Delete. * testsuite/gas/sh/sh64/shift32-1.d: Delete. * testsuite/gas/sh/sh64/shift32-3.d: Delete. * testsuite/gas/sh/sh64/shift32-noexp-3.d: Delete. * testsuite/gas/sh/sh64/shift64-1.d: Delete. * testsuite/gas/sh/sh64/shift64-2.d: Delete. * testsuite/gas/sh/sh64/shift64-3.d: Delete. * testsuite/gas/sh/sh64/shift64-noexp-3.d: Delete. * testsuite/gas/sh/sh64/syntax-1.d: Delete. * testsuite/gas/sh/sh64/syntax-1.s: Delete. * testsuite/gas/sh/sh64/syntax-2.d: Delete. * testsuite/gas/sh/sh64/syntax-2.s: Delete. * testsuite/gas/sh/sh64/ua-1.s: Delete. * testsuite/gas/sh/sh64/ua32-1.d: Delete. * testsuite/gas/sh/sh64/ua64-1.d: Delete. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove sh5 and sh64 support. * configure.tgt: Likewise. * ldlang.c: Likewise. * testsuite/ld-elfcomm/elfcomm.exp: Likewise. * testsuite/ld-gc/gc.exp: Likewise. * testsuite/ld-gc/pr13683.d: Likewise. * testsuite/ld-scripts/crossref.exp: Likewise. * testsuite/ld-selective/selective.exp: Likewise. * testsuite/ld-sh/ld-r-1.d: Likewise. * testsuite/ld-sh/rd-sh.exp: Likewise. * testsuite/ld-sh/sh.exp: Likewise. * testsuite/ld-srec/srec.exp: Likewise. * testsuite/ld-undefined/undefined.exp: Likewise. * emulparams/shelf32.sh: Delete. * emulparams/shelf32_linux.sh: Delete. * emulparams/shelf32_nbsd.sh: Delete. * emulparams/shelf64.sh: Delete. * emulparams/shelf64_nbsd.sh: Delete. * emulparams/shlelf32.sh: Delete. * emulparams/shlelf32_linux.sh: Delete. * emulparams/shlelf32_nbsd.sh: Delete. * emulparams/shlelf64.sh: Delete. * emulparams/shlelf64_nbsd.sh: Delete. * emultempl/sh64elf.em: Delete. * testsuite/ld-sh/sh64/abi32.sd: Delete. * testsuite/ld-sh/sh64/abi32.xd: Delete. * testsuite/ld-sh/sh64/abi64.sd: Delete. * testsuite/ld-sh/sh64/abi64.xd: Delete. * testsuite/ld-sh/sh64/abixx-noexp.sd: Delete. * testsuite/ld-sh/sh64/cmpct1.sd: Delete. * testsuite/ld-sh/sh64/cmpct1.xd: Delete. * testsuite/ld-sh/sh64/crange-1.s: Delete. * testsuite/ld-sh/sh64/crange-2a.s: Delete. * testsuite/ld-sh/sh64/crange-2b.s: Delete. * testsuite/ld-sh/sh64/crange-2c.s: Delete. * testsuite/ld-sh/sh64/crange-2d.s: Delete. * testsuite/ld-sh/sh64/crange-2e.s: Delete. * testsuite/ld-sh/sh64/crange-2f.s: Delete. * testsuite/ld-sh/sh64/crange-2g.s: Delete. * testsuite/ld-sh/sh64/crange-2h.s: Delete. * testsuite/ld-sh/sh64/crange-2i.s: Delete. * testsuite/ld-sh/sh64/crange1.rd: Delete. * testsuite/ld-sh/sh64/crange2.rd: Delete. * testsuite/ld-sh/sh64/crange3-cmpct.rd: Delete. * testsuite/ld-sh/sh64/crange3-media.rd: Delete. * testsuite/ld-sh/sh64/crange3.dd: Delete. * testsuite/ld-sh/sh64/crange3.rd: Delete. * testsuite/ld-sh/sh64/crangerel1.rd: Delete. * testsuite/ld-sh/sh64/crangerel2.rd: Delete. * testsuite/ld-sh/sh64/dlsection-1.s: Delete. * testsuite/ld-sh/sh64/dlsection.sd: Delete. * testsuite/ld-sh/sh64/endian.dbd: Delete. * testsuite/ld-sh/sh64/endian.dld: Delete. * testsuite/ld-sh/sh64/endian.ld: Delete. * testsuite/ld-sh/sh64/endian.s: Delete. * testsuite/ld-sh/sh64/endian.sbd: Delete. * testsuite/ld-sh/sh64/endian.sld: Delete. * testsuite/ld-sh/sh64/gotplt.d: Delete. * testsuite/ld-sh/sh64/gotplt.map: Delete. * testsuite/ld-sh/sh64/gotplt.s: Delete. * testsuite/ld-sh/sh64/init-cmpct.d: Delete. * testsuite/ld-sh/sh64/init-media.d: Delete. * testsuite/ld-sh/sh64/init.s: Delete. * testsuite/ld-sh/sh64/init64.d: Delete. * testsuite/ld-sh/sh64/mix1-noexp.sd: Delete. * testsuite/ld-sh/sh64/mix1.sd: Delete. * testsuite/ld-sh/sh64/mix1.xd: Delete. * testsuite/ld-sh/sh64/mix2-noexp.sd: Delete. * testsuite/ld-sh/sh64/mix2.sd: Delete. * testsuite/ld-sh/sh64/mix2.xd: Delete. * testsuite/ld-sh/sh64/rd-sh64.exp: Delete. * testsuite/ld-sh/sh64/rel-1.s: Delete. * testsuite/ld-sh/sh64/rel-2.s: Delete. * testsuite/ld-sh/sh64/rel32.xd: Delete. * testsuite/ld-sh/sh64/rel64.xd: Delete. * testsuite/ld-sh/sh64/relax.exp: Delete. * testsuite/ld-sh/sh64/relax1.s: Delete. * testsuite/ld-sh/sh64/relax2.s: Delete. * testsuite/ld-sh/sh64/relax3.s: Delete. * testsuite/ld-sh/sh64/relax4.s: Delete. * testsuite/ld-sh/sh64/reldl-1.s: Delete. * testsuite/ld-sh/sh64/reldl-2.s: Delete. * testsuite/ld-sh/sh64/reldl32.rd: Delete. * testsuite/ld-sh/sh64/reldl64.rd: Delete. * testsuite/ld-sh/sh64/relfail.exp: Delete. * testsuite/ld-sh/sh64/relfail.s: Delete. * testsuite/ld-sh/sh64/sh64-1.s: Delete. * testsuite/ld-sh/sh64/sh64-2.s: Delete. * testsuite/ld-sh/sh64/sh64.exp: Delete. * testsuite/ld-sh/sh64/shcmp-1.s: Delete. * testsuite/ld-sh/sh64/shdl-1.s: Delete. * testsuite/ld-sh/sh64/shdl-2.s: Delete. * testsuite/ld-sh/sh64/shdl32.xd: Delete. * testsuite/ld-sh/sh64/shdl64.sd: Delete. * testsuite/ld-sh/sh64/shdl64.xd: Delete. * testsuite/ld-sh/sh64/shmix-1.s: Delete. * testsuite/ld-sh/sh64/shmix-2.s: Delete. * testsuite/ld-sh/sh64/shmix-3.s: Delete. * testsuite/ld-sh/sh64/stobin-0-dso.d: Delete. * testsuite/ld-sh/sh64/stobin-1.d: Delete. * testsuite/ld-sh/sh64/stobin.s: Delete. * testsuite/ld-sh/sh64/stolib.s: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove w65 supportAlan Modra1-2/+0
include/ * coff/internal.h: Remove w65 support. * coff/w65.h: Delete. bfd/ * Makefile.am: Remove w65 support. * archures.c: Likewise. * coffcode.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * coff-w65.c: Delete. * cpu-w65.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove w65 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * w65-dis.c: Delete. * w65-opc.h: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/objcopy.exp: Remove w65 support. ld/ * Makefile.am: Remove w65 support. * configure.tgt: Likewise. * emulparams/w65.sh: Delete. * scripttempl/w65.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove m88k supportAlan Modra1-1/+0
include/ * coff/internal.h: Remove m88k support. * coff/m88k.h: Delete. * opcode/m88k.h: Delete. bfd/ * Makefile.am: Remove m88k support. * aoutx.h: Likewise. * archures.c: Likewise. * coffcode.h: Likewise. * coffswap.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * cpu-ns32k.c: Likewise. * elf32-nds32.c: Likewise. * mach-o.c: Likewise. * netbsd-core.c: Likewise. * reloc.c: Likewise. * targets.c: Likewise. * coff-m88k.c: Delete. * cpu-m88k.c: Delete. * elf32-m88k.c: Delete. * hosts/m88kmach3.h: Delete. * m88kmach3.c: Delete. * m88kopenbsd.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove m88k support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * m88k-dis.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * MAINTAINERS (Mark Kettenis): Move to past maintainers. * testsuite/binutils-all/objdump.exp: Remove m88k support. gas/ * configure.ac: Remove m88k support. * config.in: Regenerate. * configure: Regenerate. ld/ * Makefile.am: Remove m88k support. * configure.host: Likewise. * configure.tgt: Likewise. * testsuite/ld-elf/sec-to-seg.exp: Likewise. * emulparams/m88kbcs.sh: Delete. * scripttempl/m88kbcs.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove i370 supportAlan Modra1-2/+0
include/ * elf/i370.h: Delete. * opcode/i370.h: Delete. bfd/ * Makefile.am: Remove i370 support. * archures.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * cpu-i370.c: Delete. * elf32-i370.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove i370 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * i370-dis.c: Delete. * i370-opc.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * readelf.c: Remove i370 support. * testsuite/binutils-all/objdump.exp: Likewise. gas/ * Makefile.am: Remove i370 support. * app.c: Likewise. * config/obj-elf.c: Likewise. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/as.texinfo: Likewise. * testsuite/gas/all/gas.exp: Likewise. * testsuite/gas/elf/warn-2.s: Likewise. * testsuite/gas/lns/lns.exp: Likewise. * config/tc-i370.c: Delete. * config/tc-i370.h: Delete. * doc/c-i370.texi: Delete. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove i370 support. * configure.tgt: Likewise. * testsuite/ld-elf/compressed1d.d: Likewise. * testsuite/ld-elf/group8a.d: Likewise. * testsuite/ld-elf/group8b.d: Likewise. * testsuite/ld-elf/group9a.d: Likewise. * testsuite/ld-elf/group9b.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/pr12851.d: Likewise. * testsuite/ld-elf/pr12975.d: Likewise. * testsuite/ld-elf/pr13177.d: Likewise. * testsuite/ld-elf/pr13195.d: Likewise. * testsuite/ld-elf/pr17615.d: Likewise. * testsuite/ld-elf/pr21562a.d: Likewise. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/pr22677.d: Likewise. * testsuite/lib/ld-lib.exp: Likewise. * emulparams/elf32i370.sh: Delete. * scripttempl/elfi370.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove h8500 supportAlan Modra1-2/+0
include/ * coff/h8500.h: Delete. * coff/internal.h: Remove h8500 support. bfd/ * Makefile.am: Remove h8500 support. * archures.c: Likewise. * coffcode.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * coff-h8500.c: Delete. * cpu-h8500.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove h8500 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * h8500-dis.c: Delete. * h8500-opc.h: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/objcopy.exp: Remove h8500 support. * testsuite/lib/binutils-common.exp: Likewise. gas/ * config/obj-coff.h: Remove h8500 support. ld/ * Makefile.am: Remove h8500 support. * configure.tgt: Likewise. * emulparams/h8500.sh: Delete. * emulparams/h8500b.sh: Delete. * emulparams/h8500c.sh: Delete. * emulparams/h8500m.sh: Delete. * emulparams/h8500s.sh: Delete. * scripttempl/h8500.sc: Delete. * scripttempl/h8500b.sc: Delete. * scripttempl/h8500c.sc: Delete. * scripttempl/h8500m.sc: Delete. * scripttempl/h8500s.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-11Remove i860, i960, bout and aout-adobe targetsAlan Modra1-2/+0
Plus remove a few leftovers from the 29k support. include/ * aout/adobe.h: Delete. * aout/reloc.h: Delete. * coff/i860.h: Delete. * coff/i960.h: Delete. * elf/i860.h: Delete. * elf/i960.h: Delete. * opcode/i860.h: Delete. * opcode/i960.h: Delete. * aout/aout64.h (enum reloc_type): Trim off 29k and other unused values. * aout/ar.h (ARMAGB): Remove. * coff/internal.h (struct internal_aouthdr, struct internal_scnhdr, union internal_auxent): Remove i960 support. bfd/ * aout-adobe.c: Delete. * bout.c: Delete. * coff-i860.c: Delete. * coff-i960.c: Delete. * cpu-i860.c: Delete. * cpu-i960.c: Delete. * elf32-i860.c: Delete. * elf32-i960.c: Delete. * hosts/i860mach3.h: Delete. * Makefile.am: Remove i860, i960, bout, and adobe support. * archures.c: Remove i860 and i960 support. * coffcode.h: Likewise. * reloc.c: Likewise. * aoutx.h: Comment updates. * archive.c: Remove BOUT and i960 support. * bfd.c: Remove BOUT support. * coffswap.h: Remove i960 support. * config.bfd: Remove i860, i960 and adobe targets. * configure.ac: Remove adode, bout, i860, i960, icoff targets. * targets.c: Likewise. * ieee.c: Remove i960 support. * mach-o.c: Remove i860 support. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * opcodes/i860-dis.c: Delete. * opcodes/i960-dis.c: Delete. * Makefile.am: Remove i860 and i960 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * ieee.c: Remove i960 support. * od-macho.c: Remove i860 support. * readelf.c: Remove i860 and i960 support. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/binutils-all/objdump.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * config/aout_gnu.h: Delete. * config/tc-i860.c: Delete. * config/tc-i860.h: Delete. * config/tc-i960.c: Delete. * config/tc-i960.h: Delete. * doc/c-i860.texi: Delete. * doc/c-i960.texi: Delete. * testsuite/gas/i860/README.i860: Delete. * testsuite/gas/i860/bitwise.d: Delete. * testsuite/gas/i860/bitwise.s: Delete. * testsuite/gas/i860/branch.d: Delete. * testsuite/gas/i860/branch.s: Delete. * testsuite/gas/i860/bte.d: Delete. * testsuite/gas/i860/bte.s: Delete. * testsuite/gas/i860/dir-align01.d: Delete. * testsuite/gas/i860/dir-align01.s: Delete. * testsuite/gas/i860/dir-intel01.d: Delete. * testsuite/gas/i860/dir-intel01.s: Delete. * testsuite/gas/i860/dir-intel02.d: Delete. * testsuite/gas/i860/dir-intel02.s: Delete. * testsuite/gas/i860/dir-intel03-err.l: Delete. * testsuite/gas/i860/dir-intel03-err.s: Delete. * testsuite/gas/i860/dual01.d: Delete. * testsuite/gas/i860/dual01.s: Delete. * testsuite/gas/i860/dual02-err.l: Delete. * testsuite/gas/i860/dual02-err.s: Delete. * testsuite/gas/i860/dual03.d: Delete. * testsuite/gas/i860/dual03.s: Delete. * testsuite/gas/i860/fldst01.d: Delete. * testsuite/gas/i860/fldst01.s: Delete. * testsuite/gas/i860/fldst02.d: Delete. * testsuite/gas/i860/fldst02.s: Delete. * testsuite/gas/i860/fldst03.d: Delete. * testsuite/gas/i860/fldst03.s: Delete. * testsuite/gas/i860/fldst04.d: Delete. * testsuite/gas/i860/fldst04.s: Delete. * testsuite/gas/i860/fldst05.d: Delete. * testsuite/gas/i860/fldst05.s: Delete. * testsuite/gas/i860/fldst06.d: Delete. * testsuite/gas/i860/fldst06.s: Delete. * testsuite/gas/i860/fldst07.d: Delete. * testsuite/gas/i860/fldst07.s: Delete. * testsuite/gas/i860/fldst08.d: Delete. * testsuite/gas/i860/fldst08.s: Delete. * testsuite/gas/i860/float01.d: Delete. * testsuite/gas/i860/float01.s: Delete. * testsuite/gas/i860/float02.d: Delete. * testsuite/gas/i860/float02.s: Delete. * testsuite/gas/i860/float03.d: Delete. * testsuite/gas/i860/float03.s: Delete. * testsuite/gas/i860/float04.d: Delete. * testsuite/gas/i860/float04.s: Delete. * testsuite/gas/i860/form.d: Delete. * testsuite/gas/i860/form.s: Delete. * testsuite/gas/i860/i860.exp: Delete. * testsuite/gas/i860/iarith.d: Delete. * testsuite/gas/i860/iarith.s: Delete. * testsuite/gas/i860/ldst01.d: Delete. * testsuite/gas/i860/ldst01.s: Delete. * testsuite/gas/i860/ldst02.d: Delete. * testsuite/gas/i860/ldst02.s: Delete. * testsuite/gas/i860/ldst03.d: Delete. * testsuite/gas/i860/ldst03.s: Delete. * testsuite/gas/i860/ldst04.d: Delete. * testsuite/gas/i860/ldst04.s: Delete. * testsuite/gas/i860/ldst05.d: Delete. * testsuite/gas/i860/ldst05.s: Delete. * testsuite/gas/i860/ldst06.d: Delete. * testsuite/gas/i860/ldst06.s: Delete. * testsuite/gas/i860/pfam.d: Delete. * testsuite/gas/i860/pfam.s: Delete. * testsuite/gas/i860/pfmam.d: Delete. * testsuite/gas/i860/pfmam.s: Delete. * testsuite/gas/i860/pfmsm.d: Delete. * testsuite/gas/i860/pfmsm.s: Delete. * testsuite/gas/i860/pfsm.d: Delete. * testsuite/gas/i860/pfsm.s: Delete. * testsuite/gas/i860/pseudo-ops01.d: Delete. * testsuite/gas/i860/pseudo-ops01.s: Delete. * testsuite/gas/i860/regress01.d: Delete. * testsuite/gas/i860/regress01.s: Delete. * testsuite/gas/i860/shift.d: Delete. * testsuite/gas/i860/shift.s: Delete. * testsuite/gas/i860/simd.d: Delete. * testsuite/gas/i860/simd.s: Delete. * testsuite/gas/i860/system.d: Delete. * testsuite/gas/i860/system.s: Delete. * testsuite/gas/i860/xp.d: Delete. * testsuite/gas/i860/xp.s: Delete. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/all.texi: Likewise. * testsuite/gas/all/gas.exp * config/obj-coff.h: Remove i960 support. * doc/internals.texi: Likewise. * expr.c: Likewise. * read.c: Likewise. * write.c: Likewise. * write.h: Likewise. * testsuite/gas/lns/lns.exp: Likewise. * testsuite/gas/symver/symver.exp: Likewise. * config/tc-m68k.c: Remove BOUT support. * config/tc-score.c: Likewise. * config/tc-score7.c: Likewise. * config/tc-sparc.c: Likewise. * symbols.c: Likewise. * doc/h8.texi: Likewise. * configure.ac: Remove BOUT and i860 support. * doc/as.texinfo: Remove BOUT, i860 and i960 support * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * emulparams/coff_i860.sh: Delete. * emulparams/elf32_i860.sh: Delete. * emulparams/elf32_i960.sh: Delete. * emulparams/gld960.sh: Delete. * emulparams/gld960coff.sh: Delete. * emulparams/lnk960.sh: Delete. * emultempl/gld960.em: Delete. * emultempl/gld960c.em: Delete. * emultempl/lnk960.em: Delete. * scripttempl/i860coff.sc: Delete. * scripttempl/i960.sc: Delete. * ld.texinfo: Remove i960 support. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * testsuite/ld-discard/extern.d: Likewise. * testsuite/ld-discard/start.d: Likewise. * testsuite/ld-discard/static.d: Likewise. * testsuite/ld-elf/compressed1d.d: Likewise. * testsuite/ld-elf/group1.d: Likewise. * testsuite/ld-elf/group3b.d: Likewise. * testsuite/ld-elf/group8a.d: Likewise. * testsuite/ld-elf/group8b.d: Likewise. * testsuite/ld-elf/group9a.d: Likewise. * testsuite/ld-elf/group9b.d: Likewise. * testsuite/ld-elf/linkonce2.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/merge2.d: Likewise. * testsuite/ld-elf/merge3.d: Likewise. * testsuite/ld-elf/orphan-10.d: Likewise. * testsuite/ld-elf/orphan-11.d: Likewise. * testsuite/ld-elf/orphan-12.d: Likewise. * testsuite/ld-elf/orphan-9.d: Likewise. * testsuite/ld-elf/orphan-region.d: Likewise. * testsuite/ld-elf/orphan.d: Likewise. * testsuite/ld-elf/orphan3.d: Likewise. * testsuite/ld-elf/pr12851.d: Likewise. * testsuite/ld-elf/pr12975.d: Likewise. * testsuite/ld-elf/pr13177.d: Likewise. * testsuite/ld-elf/pr13195.d: Likewise. * testsuite/ld-elf/pr17550a.d: Likewise. * testsuite/ld-elf/pr17550b.d: Likewise. * testsuite/ld-elf/pr17550c.d: Likewise. * testsuite/ld-elf/pr17550d.d: Likewise. * testsuite/ld-elf/pr17615.d: Likewise. * testsuite/ld-elf/pr20528a.d: Likewise. * testsuite/ld-elf/pr20528b.d: Likewise. * testsuite/ld-elf/pr21562a.d: Likewise. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/pr22677.d: Likewise. * testsuite/ld-elf/pr22836-1a.d: Likewise. * testsuite/ld-elf/pr22836-1b.d: Likewise. * testsuite/ld-elf/pr349.d: Likewise. * testsuite/ld-elf/sec-to-seg.exp: Likewise. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-elf/warn1.d: Likewise. * testsuite/ld-elf/warn2.d: Likewise. * testsuite/ld-elf/warn3.d: Likewise. * testsuite/lib/ld-lib.exp: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-03-03opcodes error messagesAlan Modra1-1/+1
Another patch aimed at making binutils comply with the GNU coding standard. The generated files require https://sourceware.org/ml/cgen/2018-q1/msg00004.html cpu/ * frv.opc: Include opintl.h. (add_next_to_vliw): Use opcodes_error_handler to print error. Standardize error message. (fr500_check_insn_major_constraints, frv_vliw_add_insn): Likewise. opcodes/ * sysdep.h (opcodes_error_handler): Define. (_bfd_error_handler): Declare. * Makefile.am: Remove stray #. * opc2c.c (main): Remove bogus -l arg handling. Print "DO NOT EDIT" comment. * aarch64-dis.c, * arc-dis.c, * arm-dis.c, * avr-dis.c, * d30v-dis.c, * h8300-dis.c, * mmix-dis.c, * ppc-dis.c, * riscv-dis.c, * s390-dis.c, * sparc-dis.c, * v850-dis.c: Use opcodes_error_handler to print errors. Standardize error messages. * msp430-decode.opc, * nios2-dis.c, * rl78-decode.opc: Likewise, and include opintl.h. * nds32-asm.c: Likewise, and include sysdep.h and opintl.h. * i386-gen.c: Standardize error messages. * msp430-decode.c, * rl78-decode.c, rx-decode.c: Regenerate. * Makefile.in: Regenerate. * epiphany-asm.c, * epiphany-desc.c, * epiphany-dis.c, * epiphany-ibld.c, * fr30-asm.c, * fr30-desc.c, * fr30-dis.c, * fr30-ibld.c, * frv-asm.c, * frv-desc.c, * frv-dis.c, * frv-ibld.c, * frv-opc.c, * ip2k-asm.c, * ip2k-desc.c, * ip2k-dis.c, * ip2k-ibld.c, * iq2000-asm.c, * iq2000-desc.c, * iq2000-dis.c, * iq2000-ibld.c, * lm32-asm.c, * lm32-desc.c, * lm32-dis.c, * lm32-ibld.c, * m32c-asm.c, * m32c-desc.c, * m32c-dis.c, * m32c-ibld.c, * m32r-asm.c, * m32r-desc.c, * m32r-dis.c, * m32r-ibld.c, * mep-asm.c, * mep-desc.c, * mep-dis.c, * mep-ibld.c, * mt-asm.c, * mt-desc.c, * mt-dis.c, * mt-ibld.c, * or1k-asm.c, * or1k-desc.c, * or1k-dis.c, * or1k-ibld.c, * xc16x-asm.c, * xc16x-desc.c, * xc16x-dis.c, * xc16x-ibld.c, * xstormy16-asm.c, * xstormy16-desc.c, * xstormy16-dis.c, * xstormy16-ibld.c: Regenerate.
2018-01-03Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2017-04-06Add support for disassembling WebAssembly opcodes.Pip Cet1-0/+1
include * dis-asm.h: Add prototypes for wasm32 disassembler. opcodes * Makefile.am: Add wasm32-dis.c. * configure.ac: Add wasm32-dis.c to wasm32 target. * disassemble.c: Add wasm32 disassembler code. * wasm32-dis.c: New file. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. * po/opcodes.pot: Regenerate. gas * testsuite/gas/wasm32/allinsn.d: Adjust test for disassembler changes. * testsuite/gas/wasm32/disass.d: New test. * testsuite/gas/wasm32/disass.s: New test. * testsuite/gas/wasm32/disass-2.d: New test. * testsuite/gas/wasm32/disass-2.s: New test. * testsuite/gas/wasm32/reloc.d: Adjust test for changed reloc names. * testsuite/gas/wasm32/reloc.s: Update test for changed assembler syntax. * testsuite/gas/wasm32/wasm32.exp: Run new tests. Expect allinsn test to succeed.
2017-01-02Update year range in copyright notice of all files.Alan Modra1-1/+1
2016-12-31PRU Opcode PortDimitar Dimitrov1-0/+2
opcodes/ * Makefile.am: Add PRU source files. * configure.ac: Add PRU target. * disassemble.c (disassembler): Register PRU arch. * pru-dis.c: New file. * pru-opc.c: New file. * Makefile.in: Regenerate. * configure: Regenerate. Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
2016-12-28Check bfd support for bfd_mips_elf_get_abiflags in mips make ruleAlan Modra1-3/+15
The previous scheme with a dependency in opcodes on libbfd.la broke "make distclean". * configure.ac: Revert 2016-12-23. * Makefile.am: Likewise. (MIPS_DEFS): Define. (mips-dis.lo): Add rule. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * config.in: Regenerate. * configure: Regenerate.
2016-12-23opcodes: Use autoconf to check for `bfd_mips_elf_get_abiflags' in BFDMaciej W. Rozycki1-2/+3
Fix a regression introduced with commit 5e7fc731f80e ("MIPS/opcodes: Also set disassembler's ASE flags from ELF structures"), further updated with commit 4df995c77118 ("MIPS/opcodes: Also set disassembler's ASE flags from ELF structures"), and use autoconf to check for the presence of `bfd_mips_elf_get_abiflags' in BFD. opcodes/ * mips-dis.c (set_default_mips_dis_options): Use HAVE_BFD_MIPS_ELF_GET_ABIFLAGS rather than BFD64 to guard the call to `bfd_mips_elf_get_abiflags'. * configure.ac: Check for `bfd_mips_elf_get_abiflags' in BFD. * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add `libbfd.la'. * aclocal.m4: Regenerate. * configure: Regenerate. * config.in: Regenerate. * Makefile.in: Regenerate.
2016-12-20Add opcodes RISC-V dependenciesAlan Modra1-0/+2
* Makefile.am (TARGET_LIBOPCODES_CFILES): Add riscv files. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate.
2016-01-01Copyright update for binutilsAlan Modra1-1/+1
2015-08-12Remove trailing spaces in opcodesH.J. Lu1-8/+8
2015-01-28FT32 initial supportAlan Modra1-0/+2
FT32 is a new 32-bit RISC core developed by FTDI for embedded applications. * configure.ac: Add FT32 support. * configure: Regenerate. bfd/ * Makefile.am: Add FT32 files. * archures.c (enum bfd_architecture): Add bfd_arch_ft32. (bfd_mach_ft32): Define. (bfd_ft32_arch): Declare. (bfd_archures_list): Add bfd_ft32_arch. * config.bfd: Handle FT32. * configure.ac: Likewise. * cpu-ft32.c: New file. * elf32-ft32.c: New file. * reloc.c (BFD_RELOC_FT32_10, BFD_RELOC_FT32_20, BFD_RELOC_FT32_17, BFD_RELOC_FT32_18): Define. * targets.c (_bfd_target_vector): Add ft32_elf32_vec. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * readelf.c: Add FT32 support. gas/ * Makefile.am: Add FT32 files. * config/tc-ft32.c: New file. * config/tc-ft32.h: New file. * configure.tgt: Add FT32 support. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. gas/testsuite/ * gas/ft32/ft32.exp: New file. * gas/ft32/insn.d: New file. * gas/ft32/insn.s: New file. include/ * dis-asm.h (print_insn_ft32): Declare. include/elf/ * common.h (EM_FT32): Define. * ft32.h: New file. include/opcode/ * ft32.h: New file. ld/ * Makefile.am: Add FT32 files. * configure.tgt: Handle FT32 target. * emulparams/elf32ft32.sh: New file. * scripttempl/ft32.sc: New file. * Makefile.in: Regenerate. opcodes/ * Makefile.am: Add FT32 files. * configure.ac: Handle FT32. * disassemble.c (disassembler): Call print_insn_ft32. * ft32-dis.c: New file. * ft32-opc.c: New file. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate.
2015-01-02ChangeLog rotatation and copyright year updateAlan Modra1-1/+1
2014-12-06Add Visium support to opcodesEric Botcazou1-0/+2
include/ * dis-asm.h (print_insn_visium): Declare. include/opcode/ * visium.h: New file. opcodes/ * configure.ac: Add Visium support. * configure: Regenerate. * Makefile.am (TARGET_LIBOPCODES_CFILES): Add visium-dis.c and visium-opc.c. * Makefile.in: Regenerate. * disassemble.c (ARCH_visium): Define if ARCH_all. (disassembler): Deal with bfd_arch_visium if ARCH_visium. * visium-dis.c: New file. * visium-opc.c: Likewise. * po/POTFILES.in: Regenerate.
2014-07-04Use modern AC_INIT in configure.inAlan Modra1-4/+2
This removes usage of the obsolete AC_INIT and AM_INIT_AUTOMAKE in all binutils configure.in files. The BFD version is now in bfd/version.m4 rather than bfd/configure.in, which allows automake to automatically track this dependency. bfd/ * version.m4: New file. * configure.in: Include version.m4. (AC_INIT): Update. * Makefile.am (RELEASE): Delete. (bfdver.h): Depend on development.sh, use instead of RELEASE. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. opcodes/ * configure.in: Include bfd/version.m4. (AC_INIT, AM_INIT_AUTOMAKE): Use modern form. (BFD_VERSION): Delete. * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in. * configure: Regenerate. * Makefile.in: Regenerate. binutils/ * configure.in: Include bfd/version.m4. (AC_INIT, AM_INIT_AUTOMAKE): Use modern form. (BFD_VERSION): Delete. * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in. * configure: Regenerate. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. gas/ * configure.in: Include bfd/version.m4. (AC_INIT, AM_INIT_AUTOMAKE): Use modern form. (BFD_VERSION): Delete. * configure.com: Get bfd version from bfd/version.m4. * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in. * configure: Regenerate. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. gprof/ * configure.in: Include bfd/version.m4. (AC_INIT, AM_INIT_AUTOMAKE): Use modern form. (BFD_VERSION): Delete. * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in. * configure: Regenerate. * Makefile.in: Regenerate. ld/ * configure.in: Include bfd/version.m4. (AC_INIT, AM_INIT_AUTOMAKE): Use modern form. (BFD_VERSION): Delete. * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in. * configure: Regenerate. * Makefile.in: Regenerate.
2014-06-05Make it easy to make --disable-werror the default for both binutils and gdbJoel Brobecker1-1/+2
The goal of this patch is to provide an easy way to make --disable-werror the default when building binutils, or the parts of binutils that need to get built when building GDB. In development mode, we want to continue making -Werror the default with GCC. But, when making releases, I think we want to make it as easy as possible for regular users to successfully build from sources. GDB already has this kind of feature to turn -Werror as well as the use of the libmcheck library. As GDB Release Manager, I take advantage of it to turn those off after having cut the branch. I'd like to be able to do the same for the binutils bits. And perhaps Tristan will want to do the same for his releases too (not sure, binutils builders might be a little savvier than GDB builders). This patch introduces a new file, called development.sh, which just sets a variable called $development. In our development branches (Eg. "master"), it's set to true. But setting it to false would allow us to change the default behavior of various development-related features to be turned off; in this case, it turns off the use of -Werror by default (use --enable-werror to turn it back on). bfd/ChangeLog: * development.sh: New file. * warning.m4 (AM_BINUTILS_WARNINGS): Source bfd/development.sh. Make -Werror the default with GCC only if DEVELOPMENT is true. * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add $(srcdir)/development.sh. * Makefile.in, configure: Regenerate. binutils/ChangeLog: * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on bfd's development.sh. * Makefile.in, configure: Regenerate. gas/ChangeLog: * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on bfd's development.sh. * Makefile.in, configure: Regenerate. gold/ChangeLog: * Makefile.am (CONFIG_STATUS_DEPENDENCIES): New. * Makefile.in, configure: Regenerate. gprof/ChangeLog: * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on bfd's development.sh. * Makefile.in, configure: Regenerate. ld/ChangeLog: * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on bfd's development.sh. * Makefile.in, configure: Regenerate. opcodes/ChangeLog: * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on bfd's development.sh. * Makefile.in, configure: Regenerate. gdb/ChangeLog: * development.sh: Delete. * Makefile.in (config.status): Adjust dependency on development.sh. * configure.ac: Adjust development.sh source call. * configure: Regenerate. gdb/gdbserver/ChangeLog: * configure.ac: Adjust development.sh source call. * Makefile.in (config.status): Adjust dependency on development.sh. * configure: Regenerate. Tested on x86_64-linux by building two ways: One with DEVELOPMENT set to true, and one with DEVELOPMENT set to false. In the first case, I could see the use of -Werror, while it disappeared in the second case.
2014-04-22Remove support for the (deprecated) openrisc and or32 configurations and replaceChristian Svensson1-16/+13
with support for the new or1k configuration.
2014-03-05Update copyright yearsAlan Modra1-1/+1
2013-12-13Add support for Andes NDS32:Kuan-Lin Chen1-0/+2
BFD: * Makefile.am (BFD32_BACKENDS, BFD32_BACKENDS_CFILES): Add nds32 files. * Makefile.in: Regenerate. * archures.c (bfd_nds32_arch): Add nds32 target. * bfd-in2.h: Regenerate. * config.bfd (nds32*le-*-linux): Add bfd_elf32_nds32lelin_vec and bfd_elf32_nds32belin_vec. (nds32*be-*-linux*): Likewise. (nds32*le-*-*): Add bfd_elf32_nds32le_vec and bfd_elf32_nds32be_vec. (nds32*be-*-*): Likewise. * configure.in (bfd_elf32_nds32be_vec): Add elf32-nds32.lo. (bfd_elf32_nds32le_vec): Likewise. (bfd_elf32_nds32belin_vec): Likewise. (bfd_elf32_nds32lelin_vec): Likewise. * configure: Regenerate. * cpu-nds32.c: New file for nds32. * elf-bfd.h: Add NDS32_ELF_DATA. * elf32-nds32.c: New file for nds32. * elf32-nds32.h: New file for nds32. * libbfd.h: Regenerate. * reloc.c: Add relocations for nds32. * targets.c (bfd_elf32_nds32be_vec): New declaration for nds32. (bfd_elf32_nds32le_vec): Likewise. (bfd_elf32_nds32belin_vec): Likewise. (bfd_elf32_nds32lelin_vec): Likewise. BINUTILS: * readelf.c: Include elf/nds32.h (guess_is_rela): Add case for EM_NDS32. (dump_relocations): Add case for EM_NDS32. (decode_NDS32_machine_flags): New. (get_machine_flags): Add case for EM_NDS32. (is_32bit_abs_reloc): Likewise. (is_16bit_abs_reloc): Likewise. (process_nds32_specific): New. (process_arch_specific): Add case for EM_NDS32. * NEWS: Announce Andes nds32 support. * MAINTAINERS: Add nds32 maintainers. TESTSUITE: * binutils-all/objdump.exp: Add NDS32 cpu. * binutils-all/readelf.r: Skip extra reloc created by NDS32. GAS: * Makefile.am (TARGET_CPU_CFILES): Add config/tc-nds32.c. (TARGET_CPU_HFILES): Add config/tc-nds32.h. * Makefile.in: Regenerate. * configure.in (nds32): Add nds32 target extension config support. * configure.tgt : Add case for nds32-*-elf* and nds32-*-linux*. * configure: Regenerate. * config/tc-nds32.c: New file for nds32. * config/tc-nds32.h: New file for nds32. * doc/Makefile.am (CPU_DOCS): Add c-nds32.texi. * doc/Makefile.in: Regenerate. * doc/as.texinfo: Add nds32 options. * doc/all.texi: Set NDS32. * doc/c-nds32.texi: New file dor nds32 document. * NEWS: Announce Andes nds32 support. TESTSUITE: * gas/all/gas.exp: Add expected failures for NDS32. * gas/elf/elf.exp: Likewise. * gas/lns/lns.exp: Use alternate test. * gas/macros/irp.d: Skip for NDS32. * gas/macros/macros.exp: Skip some tests for the NDS32. * gas/macros/rept.d: Skip for NDS32. * gas/macros/test3.d: Skip for NDS32. * gas/nds32: New directory. * gas/nds32/alu-1.s: New test. * gas/nds32/alu-1.d: Likewise. * gas/nds32/alu-2.s: Likewise. * gas/nds32/alu-2.d: Likewise. * gas/nds32/br-1.d: Likewise. * gas/nds32/br-1.s: Likewise. * gas/nds32/br-2.d: Likewise. * gas/nds32/br-2.s: Likewise. * gas/nds32/ji-jr.d: Likewise. * gas/nds32/ji-jr.s: Likewise. * gas/nds32/ls.d: Likewise. * gas/nds32/ls.s: Likewise. * gas/nds32/lsi.d: Likewise. * gas/nds32/lsi.s: Likewise. * gas/nds32/to-16bit-v1.d: Likewise. * gas/nds32/to-16bit-v1.s: Likewise. * gas/nds32/to-16bit-v2.d: Likewise. * gas/nds32/to-16bit-v2.s: Likewise. * gas/nds32/to-16bit-v3.d: Likewise. * gas/nds32/to-16bit-v3.s: Likewise. * gas/nds32/nds32.exp: New test driver. LD: * Makefile.am (ALL_EMULATION_SOURCES): Add nds32 target. * Makefile.in: Regenerate. * configure.tgt: Add case for nds32*le-*-elf*, nds32*be-*-elf*, nds32*le-*-linux-gnu*, and nds32*be-*-linux-gnu*. * emulparams/nds32belf.sh: New file for nds32. * emulparams/nds32belf_linux.sh: Likewise. * emulparams/nds32belf16m.sh: Likewise. * emulparams/nds32elf.sh: Likewise. * emulparams/nds32elf_linux.sh: Likewise. * emulparams/nds32elf16m.sh: Likewise. * emultempl/nds32elf.em: Likewise. * scripttempl/nds32elf.sc}: Likewise. * gen-doc.texi: Set NDS32. * ld.texinfo: Set NDS32. * NEWS: Announce Andes nds32 support. TESTSUITE: * lib/ld-lib.exp: Add NDS32 to list of targets that do not support shared library generation. * ld-nds32: New directory. * ld-nds32/branch.d: New test. * ld-nds32/branch.ld: New test. * ld-nds32/branch.s: New test. * ld-nds32/diff.d: New test. * ld-nds32/diff.ld: New test. * ld-nds32/diff.s: New test. * ld-nds32/gp.d: New test. * ld-nds32/gp.ld: New test. * ld-nds32/gp.s: New test. * ld-nds32/imm.d: New test. * ld-nds32/imm.ld: New test. * ld-nds32/imm.s: New test. * ld-nds32/imm_symbol.s: New test. * ld-nds32/relax_jmp.d: New test. * ld-nds32/relax_jmp.ld: New test. * ld-nds32/relax_jmp.s: New test. * ld-nds32/relax_load_store.d: New test. * ld-nds32/relax_load_store.ld: New test. * ld-nds32/relax_load_store.s: New test. * ld-nds32/nds32.exp: New file. OPCODES: * Makefile.am (TARGET_LIBOPCODES_CFILES): Add nds32-asm.c and nds32-dis.c. * Makefile.in: Regenerate. * configure.in: Add case for bfd_nds32_arch. * configure: Regenerate. * disassemble.c (ARCH_nds32): Define. * nds32-asm.c: New file for nds32. * nds32-asm.h: New file for nds32. * nds32-dis.c: New file for nds32. * nds32-opc.h: New file for nds32. INCLUDE: * dis-asm.h (print_insn_nds32): Add nds32 target. * elf/nds32.h: New file for nds32. * opcode/nds32.h: New file for nds32.
2013-07-14opcodes/Richard Sandiford1-39/+0
* Makefile.am (mips-opc.lo, micromips-opc.lo, mips16-opc.lo): Remove special rules. * Makefile.in: Regenerate. * mips-opc.c, micromips-opc.c, mips16-opc.c: Explicitly initialize all fields. Reformat.
2013-06-21 * msp430-decode.opc: New.Nick Clifton1-0/+5
* msp430-decode.c: New/generated. * Makefile.am (TARGET_LIBOPCODES_CFILES): Add msp430-decode.c. (MAINTAINER_CLEANFILES): Likewise. Add rule to build msp430-decode.c frommsp430decode.opc using the opc2c program. * Makefile.in: Regenerate. * configure.in: Add msp430-decode.lo to msp430 architecture files. * configure: Regenerate. * msp430-decode.h: New.
2013-06-17 * Makefile.am (mips-opc.lo): Add rules to create automaticAlan Modra1-3/+33
dependency files. Pass archdefs. (micromips-opc.lo, mips16-opc.lo): Likewise. * Makefile.in: Regenerate.
generated by cgit v1.1 at 2024-12-02 16:52:54 +0000