aboutsummaryrefslogtreecommitdiff
path: root/ld
AgeCommit message (Collapse)AuthorFilesLines
2021-05-12arm: fix fallout from recent thumb2 detection patchRichard Earnshaw2-1/+6
The recent change to correct the detection of thumb2 object files resulted in a ld test for veneering starting to fail. The problem was the test itself, which was incorrectly expecting thumb1 type far-call veneers instead of the thumb2 flavour. We already have a dump file of the expected form, so the fix is to change the expected output accordingly. ld/ * testsuite/ld-arm/arm-elf.exp (farcall test for v8-m.mainline): Correct expected output.
2021-05-11x86-64/ELF: Fix "clear src_mask for all reloc types" test caseRoland McGrath2-1/+6
ld/ * testsuite/ld-x86-64/rela.d: Fix regexp not to presume a specific address layout, so it works for e.g. --target=x86-64-elf.
2021-05-11Prevent libdel.dll.a from being installed on Windows based systems.Nick Clifton3-0/+9
PR 27113 * Makefile.am (install-data-local): Also delete libdep.dll.a if it is present. * Makefile.in: Regenerate.
2021-05-10Enable linker garbage collection for the PRU target.Dimitar Dimitrov8-7/+17
bfd * elf32-pru.c (elf_backend_can_gc_sections): Define as 1. ld * testsuite/ld-elf/group8a.d: Remove pru from XFAIL list. * testsuite/ld-elf/group8b.d: Ditto. * testsuite/ld-elf/group9a.d: Ditto. * testsuite/ld-elf/group9b.d: Ditto. * testsuite/ld-elf/pr12851.d: Ditto. * testsuite/ld-elf/pr22677.d: Ditto. * testsuite/lib/ld-lib.exp (check_gc_sections_available): Remove pru from list.
2021-05-10PRU: Add alignment for resource table, and allow sizes of memory regions to ↵Dimitar Dimitrov2-2/+14
be set from the command line. ld * scripttempl/pru.sc (.resource_table): Add ALIGN directive. Use symbols for memory sizes.
2021-05-08support generating multi-html pages in parallelMike Frysinger3-7/+24
Use the pattern from other projects where we generate the html pages in a dir named the same as the project. So now we have: gas/doc/gas.html - single html page gas/doc/gas/ - multiple html pages This works for projects that have a doc/ subdir already, but gprof & ld require a little tweaking since they generate their docs in their respective toplevels.
2021-05-08generate single html manual page by defaultMike Frysinger3-2/+7
This better matches other GNU projects like autoconf/automake where the html manual is the single page form. We'll support the multi-page form in a follow up change.
2021-05-07x86-64/ELF: clear src_mask for all reloc typesJan Beulich3-0/+16
x86-64 uses rela relocations. The comment next to the field's declaration says "Non-zero values for ELF USE_RELA targets should be viewed with suspicion ..." And indeed the fields being non-zero causes section contents to be accumulated into the final relocated values in addition to the relocations' addends, which is contrary to the ELF spec.
2021-05-07When computing section link order for a relocateable link, ignore section sizes.Nick Clifton2-6/+14
* ldelfgen.c (compare_link_order): Ignore section size when performing a relocateable link.
2021-05-07multiple definition warnings from script symbolsAlan Modra3-4/+14
In commit 89753bbf81 I enabled a warning for scripts redefining symbols. The idea was to not warn for symbols defined by shared libraries (the h->u.def.section->output_section != NULL test), but the test failed to take into account absolute symbols. Absolute symbols defined in shared libraries are currently indistinguishable from absolute symbols defined in relocatable objects, at least when only looking at struct bfd_link_hash_entry. So, don't warn for any absolute symbols. * ldexp.c (update_definedness): Don't return false for absolute symbols. * ldmain.c (multiple_definition): Print "warning: " in message when not a hard error.
2021-05-07Re: elf: Always append ".COUNT" to local symbolsAlan Modra3-4/+7
Fixes XPASSes on frv-linux. * testsuite/ld-elf/pr27825-1.d: Correct xfail. * testsuite/ld-elf/pr27825-2.d: Likewise.
2021-05-06or1k: Support large plt_relocs when generating plt entriesStafford Horne7-0/+122
The current PLT generation code will generate invalid code when the PLT relocation offset exceeds 64k. This fixes the issue by detecting large plt_reloc offsets and generare code sequences to create larger plt relocations. The "large" plt code needs 2 extra instructions to create 32-bit offsets. bfd/ChangeLog: PR 27746 * elf32-or1k.c (PLT_ENTRY_SIZE_LARGE, PLT_MAX_INSN_COUNT, OR1K_ADD, OR1K_ORI): New macros to help with plt creation. (elf_or1k_link_hash_table): New field plt_count. (elf_or1k_link_hash_entry): New field plt_index. (elf_or1k_plt_entry_size): New function. (or1k_write_plt_entry): Update to support variable size PLTs. (or1k_elf_finish_dynamic_sections): Use new or1k_write_plt_entry API. (or1k_elf_finish_dynamic_symbol): Update to write large PLTs when needed. (allocate_dynrelocs): Use elf_or1k_plt_entry_size to account for PLT size. ld/ChangeLog: PR 27746 testsuite/ld-or1k/or1k.exp (or1kplttests): Add tests for linking along with gotha() relocations. testsuite/ld-or1k/gotha1.dd: New file. testsuite/ld-or1k/gotha1.s: New file. testsuite/ld-or1k/gotha2.dd: New file. testsuite/ld-or1k/gotha2.s: New file testsuite/ld-or1k/pltlib.s (x): Define size to avoid link failure.
2021-05-06libctf, ld: fix test results for upstream GCCNick Alcock13-19/+81
The tests currently in binutils are aimed at the original GCC-based implementation of CTF, which emitted CTF directly from GCC's internal representation. The approach now under review emits CTF from DWARF, with an eye to eventually doing this for all non-DWARF debuginfo-like formats GCC supports. It also uses a different flag to enable CTF emission (-gctf rather than -gt). Adjust the testsuite accordingly. Given that the ld testsuite results are dependent on type ordering, which we do not guarantee at all, it's amazing how little changes. We see a few type ordering differences, slices change because the old GCC was buggy (slices were emitted "backwards", from the wrong end of the machine word) and its expected results were wrong, and GCC now emits the underlying integral type for enumerated types, though CTF has no way to record this yet (coming in v4). GCC also now emits even hidden symbols into the symtab (and thus symtypetab), so one symtypetab test changes its expected results slightly to compensate. Also add tests for the CTF_K_UNKNOWN nonrepresentable type: this couldn't be done before now since the only GCC that emits CTF_K_UNKNOWN for nonrepresentable types is the new one. ld/ChangeLog 2021-05-06 Nick Alcock <nick.alcock@oracle.com> * testsuite/ld-ctf/ctf.exp: Use -gctf, not -gt. * testsuite/lib/ld-lib.exp: Likewise. * testsuite/ld-ctf/nonrepresentable-1.c: New test for nonrepresentable types. * testsuite/ld-ctf/nonrepresentable-2.c: Likewise. * testsuite/ld-ctf/nonrepresentable.d: Likewise. * testsuite/ld-ctf/array.d: Larger type section. * testsuite/ld-ctf/data-func-conflicted.d: Likewise. * testsuite/ld-ctf/enums.d: Likewise. * testsuite/ld-ctf/conflicting-enums.d: Don't compare types. * testsuite/ld-ctf/cross-tu-cyclic-conflicting.d: Changed type order. * testsuite/ld-ctf/cross-tu-noncyclic.d: Likewise. * testsuite/ld-ctf/slice.d: Adjust for improved slice emission. libctf/ChangeLog 2021-05-06 Nick Alcock <nick.alcock@oracle.com> * testsuite/lib/ctf-lib.exp: Use -gctf, not -gt. * testsuite/libctf-regression/nonstatic-var-section-ld-r.lk: Hidden symbols now get into the symtypetab anyway.
2021-05-05elf: Always append ".COUNT" to local symbolsH.J. Lu9-1/+74
Always append ".COUNT" to local symbols to avoid potential conflicts with existing local symbol "XXX.COUNT". bfd/ PR ld/27825 * elflink.c (elf_link_output_symstrtab): Always append ".COUNT" to local symbols. ld/ PR ld/27825 * testsuite/ld-elf/pr27825-1.d: New file. * testsuite/ld-elf/pr27825-1a.s: Likewise. * testsuite/ld-elf/pr27825-1b.s: Likewise. * testsuite/ld-elf/pr27825-2.d: Likewise. * testsuite/ld-elf/pr27825-2a.s: Likewise. * testsuite/ld-elf/pr27825-2b.s: Likewise.
2021-05-05PowerPC undefweak testcaseAlan Modra5-0/+28
Test for commit 4916030821bb and b293661219c3. * testsuite/ld-powerpc/empty.s: New file. * testsuite/ld-powerpc/undefweak.d, * testsuite/ld-powerpc/undefweak.s: New testcase. * testsuite/ld-powerpc/powerpc.exp: Run it.
2021-05-03Re: section symbols without a nameAlan Modra2-1/+6
commit 23356397449 changed this file but missed one place. * testsuite/ld-s390/tlspic_64.rd: Adjust expected output for named section symbols.
2021-04-28Stop the BFD library from treating annobin symbols as potential function ↵Nick Clifton4-0/+28
symbols. bfd * elf.c (_bfd_elf_maybe_function_sym): Do not accept annobin symbols as potential function symbols. * elfnn-aarch64.c (elfNN_aarch64_maybe_function_sym): Likewise. * elf64-ppc.c (ppc64_elf_maybe_function_sym): Likewise. * elf32-arm.c (elf32_arm_maybe_function_sym): Likewise. ld * testsuite/ld-elf/anno-sym.s: New test source file. * testsuite/ld-elf/anno-sym.d: New test driver. * testsuite/ld-elf/anno-sym.l: New test error output.
2021-04-26x86: correct overflow checking for 16-bit PC-relative relocsJan Beulich6-0/+31
The only insn requiring a truly 16-bit PC-relative relocation outside of 16-bit mode is XBEGIN (with an operand size override). For it, the relocation generated should behave similar to 8- and (for 64-bit) 32-bit PC-relatives ones, i.e. be checked for a signed value to fit the field. This same mode is also correct for 16-bit code. Outside of 16-bit code, branches with operand size overrides act in a truly PC-relative way only when living in the low 32k of address space, as they truncate rIP to 16 bits. This can't be expressed by a PC-relative relocation. Putting in place a new testcase, I'd like to note that the two existing ones (pcrel16 and pcrel16abs) appear to be pretty pointless: They don't expect any error despite supposedly checking for overflow, and in fact there can't possibly be any error for the - former since gas doesn't emit any relocation in the first place there, - latter because the way the relocation gets expressed by gas doesn't allow the linker to notice the overflow; it should be detected by gas if at all, but see above (an error would be reported here for x86-64 afaict, but this test doesn't get re-used there).
2021-04-23ld: Properly create a symbolic link to tmpdir/ldscriptsH.J. Lu2-1/+9
Don't create a symbolic link to tmpdir/ldscripts if it exists. PR ld/27771 * testsuite/ld-bootstrap/bootstrap.exp: Create a symbolic link to tmpdir/ldscripts only if it doesn't exist.
2021-04-22x86-64/PE: adjust PR ld/26659 testcase for CygwinJan Beulich2-25/+23
While the testcase put in place by 74edb473c9ec ("PE/Windows x86_64: Fix weak undef symbols after image base change") is fine for MingW, it fails for Cygwin. This is because the default image base is different there (for whatever reason).
2021-04-21Adjust readelf's output so that section symbols without a name as shown with ↵Nick Clifton52-485/+540
their section name. binutils* readelf.c (print_dynamic_symbol): Print the section name for section symbols without a name of their own. * testsuite/binutils-all/mips/global-local-symtab-sort-n64t.d: Adjust expected output to allow for named section symbols. * testsuite/binutils-all/mips/global-local-symtab-sort-o32t.d: Likewise. * testsuite/binutils-all/readelf.s-64: Likewise. * testsuite/binutils-all/readelf.ss-64-unused: Likewise. * testsuite/binutils-all/readelf.ss-tmips: Likewise. * testsuite/binutils-all/readelf.ss-unused: Likewise. ld * testsuite/ld-aarch64/variant_pcs-now.d: Adjust expected output to allow for named section symbols. * testsuite/ld-aarch64/variant_pcs-r.d: Likewise. * testsuite/ld-aarch64/variant_pcs-shared.d: Likewise. * testsuite/ld-alpha/tlsbin.rd: Likewise. * testsuite/ld-alpha/tlsbinr.rd: Likewise. * testsuite/ld-alpha/tlspic.rd: Likewise. * testsuite/ld-arm/rodata-merge-map.sym: Likewise. * testsuite/ld-arm/script-type.sym: Likewise. * testsuite/ld-cris/libdso-2.d: Likewise. * testsuite/ld-cris/pr16044.d: Likewise. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-ia64/tlsbin.rd: Likewise. * testsuite/ld-ia64/tlspic.rd: Likewise. * testsuite/ld-mips-elf/global-local-symtab-sort-n64t.d: Likewise. * testsuite/ld-mips-elf/global-local-symtab-sort-o32t.d: Likewise. * testsuite/ld-mmix/bspec1.d: Likewise. * testsuite/ld-mmix/bspec2.d: Likewise. * testsuite/ld-mmix/local1.d: Likewise. * testsuite/ld-mmix/local3.d: Likewise. * testsuite/ld-mmix/local5.d: Likewise. * testsuite/ld-mmix/local7.d: Likewise. * testsuite/ld-mmix/undef-3.d: Likewise. * testsuite/ld-powerpc/tlsso.r: Likewise. * testsuite/ld-powerpc/tlsso32.r: Likewise. * testsuite/ld-powerpc/tlstocso.r: Likewise. * testsuite/ld-s390/tlsbin.rd: Likewise. * testsuite/ld-s390/tlsbin_64.rd: Likewise. * testsuite/ld-s390/tlspic.rd: Likewise. * testsuite/ld-s390/tlspic_64.rd: Likewise. * testsuite/ld-sparc/gotop32.rd: Likewise. * testsuite/ld-sparc/gotop64.rd: Likewise. * testsuite/ld-sparc/tlssunbin32.rd: Likewise. * testsuite/ld-sparc/tlssunbin64.rd: Likewise. * testsuite/ld-sparc/tlssunnopic32.rd: Likewise. * testsuite/ld-sparc/tlssunnopic64.rd: Likewise. * testsuite/ld-sparc/tlssunpic32.rd: Likewise. * testsuite/ld-sparc/tlssunpic64.rd: Likewise. * testsuite/ld-tic6x/common.d: Likewise. * testsuite/ld-tic6x/shlib-1.rd: Likewise. * testsuite/ld-tic6x/shlib-1b.rd: Likewise. * testsuite/ld-tic6x/shlib-1r.rd: Likewise. * testsuite/ld-tic6x/shlib-1rb.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1b.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1r.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1rb.rd: Likewise. * testsuite/ld-tic6x/shlib-noindex.rd: Likewise. * testsuite/ld-tic6x/static-app-1.rd: Likewise. * testsuite/ld-tic6x/static-app-1b.rd: Likewise. * testsuite/ld-tic6x/static-app-1r.rd: Likewise. * testsuite/ld-tic6x/static-app-1rb.rd: Likewise. gas * testsuite/gas/aarch64/dwarf.d: Adjust expected output to allow for named section symbols. * testsuite/gas/arm/thumbver.d: Likewise. * testsuite/gas/bfin/loop_temps.d: Likewise. * testsuite/gas/elf/section2.e-arc: Likewise. * testsuite/gas/elf/section2.e-arm: Likewise. * testsuite/gas/elf/section2.e-csky: Likewise. * testsuite/gas/elf/section2.e-m32r: Likewise. * testsuite/gas/elf/section2.e-mips: Likewise. * testsuite/gas/elf/section2.e-msp430: Likewise. * testsuite/gas/elf/section2.e-riscv: Likewise. * testsuite/gas/elf/section2.e-rl78: Likewise. * testsuite/gas/elf/section2.e-rx: Likewise. * testsuite/gas/elf/section2.e-score: Likewise. * testsuite/gas/elf/section2.e-tic6x: Likewise. * testsuite/gas/elf/section2.e-unused: Likewise. * testsuite/gas/elf/section2.e-v850: Likewise. * testsuite/gas/elf/section2.e-xtensa: Likewise. * testsuite/gas/ia64/alias-ilp32.d: Likewise. * testsuite/gas/ia64/alias.d: Likewise. * testsuite/gas/ia64/global.d: Likewise. * testsuite/gas/microblaze/relax_size.elf: Likewise. * testsuite/gas/microblaze/relax_size2.elf: Likewise. * testsuite/gas/mips/global-local-symtab-sort-n64t.d: Likewise. * testsuite/gas/mips/global-local-symtab-sort-o32t.d: Likewise. * testsuite/gas/mmix/bspec-1.d: Likewise. * testsuite/gas/mmix/byte-1.d: Likewise. * testsuite/gas/mmix/comment-1.d: Likewise. * testsuite/gas/mmix/loc-1.d: Likewise. * testsuite/gas/mmix/loc-2.d: Likewise. * testsuite/gas/mmix/loc-3.d: Likewise. * testsuite/gas/mmix/loc-4.d: Likewise. * testsuite/gas/mmix/loc-5.d: Likewise. * testsuite/gas/tic6x/scomm-directive-4.d: Likewise.
2021-04-20Rework the R_NEG support on both gas and ld for the PowerPC AIX targets, in ↵Cl?ment Chigot6-0/+92
order to manage C++ exceptions built with GCC. bfd PR binutils/21700 * reloc.c (BFD_RELOC_PPC_NEG): New relocation. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * coff-rs6000.c (_bfd_xcoff_reloc_type_lookup): Add BFD_RELOC_PPC_NEG handler. (xcoff_reloc_type_neg): Correctly substract addend. * coff64-rs6000.c (xcoff64_howto_table): Add R_NEG_32 howto. (xcoff64_rtype2howto): Add handler for R_NEG_32. (xcoff64_reloc_type_lookup): Add BFD_RELOC_PPC_NEG handler. * xcofflink.c (xcoff_need_ldrel_p): Check output section for R_POS-like relocations. New argument added. (xcoff_mark): Adapt to new xcoff_need_ldrel_p argument. (xcoff_link_input_bfd): Likewise. gas * config/tc-ppc.c (ppc_get_csect_to_adjust): New function. (ppc_fix_adjustable): Manage fx_subsy part. (tc_gen_reloc): Create second relocation when both fx_addsy and fx_subsy are provided. * config/tc-ppc.h (RELOC_EXPANSION_POSSIBLE): New define. (MAX_RELOC_EXPANSION): Likewise. (TC_FORCE_RELOCATION_SUB_SAME): Likewise (UNDEFINED_DIFFERENCE_OK): Likewise * testsuite/gas/all/gas.exp: Skip difference between two undefined symbols test. ld * testsuite/ld-powerpc/aix52.exp: Add new test. * testsuite/ld-powerpc/aix-neg-reloc-32.d: New test. * testsuite/ld-powerpc/aix-neg-reloc-64.d: New test. * testsuite/ld-powerpc/aix-neg-reloc.ex: New test. * testsuite/ld-powerpc/aix-neg-reloc.s: New test.
2021-04-13Document the effect of --as-needed on --rpath on Linux based systems.Nick Clifton2-0/+21
* ld.texi (Options): Add note about the effect of --as-needed on the --rpath and --rpath-link options on Linux based systems.
2021-04-13PR27722, error: array subscript has type charAlan Modra2-3/+9
PR 27722 * libdep_plugin.c (str2vec): Don't pass a potentially signed char to isspace.
2021-04-13ENABLE_CHECKING in bfd, opcodes, binutils, ldAlan Modra4-2/+42
gas already has this. Here it enables checking hash table type passed to elf_link_hash_lookup and elf_link_hash_traverse. bfd/ * elf-bfd.h (ENABLE_CHECKING): Define. (elf_link_hash_lookup): Abort if wrong type of hash table. (elf_link_hash_traverse): Likewise. * configure.ac (--enable-checking): Add support. * config.in: Regenerate. * configure: Regenerate. binutils/ * configure.ac (--enable-checking): Add support. * config.in: Regenerate. * configure: Regenerate. ld/ * configure.ac (--enable-checking): Add support. * config.in: Regenerate. * configure: Regenerate. opcodes/ * configure.ac (--enable-checking): Add support. * config.in: Regenerate. * configure: Regenerate.
2021-04-12convert elf_link_hash macros to inline functionsAlan Modra3-2/+8
Involves a bit of editing as we now need to be more precise in pointer types. bfd/ * elf-bfd.h (is_elf_hash_table): Convert macro to inline function. (elf_link_hash_lookup, elf_link_hash_traverse): Likewise. (elf_hash_table, elf_hash_table_id): Likewise. * elf32-arm.c (elf32_arm_setup_section_lists): Delete redundant is_elf_hash_table check. * elf32-csky.c (elf32_csky_setup_section_lists): Likewise. * elf32-hppa.c (clobber_millicode_symbols): Correct param types. * elf64-alpha.c (elf64_alpha_output_extsym): Likewise. * elfnn-ia64.c (elfNN_ia64_global_dyn_info_free: Likewise. (elfNN_ia64_global_dyn_sym_thunk: Likewise. * elf64-ia64-vms.c (elf64_ia64_global_dyn_info_free): Likewise. (elf64_ia64_global_dyn_sym_thunk): Likewise. (elf64_vms_link_add_object_symbols): Pass base type of hash table to is_elf_hash_table. * elflink.c (_bfd_elf_dynamic_symbol_p): Likewise. (_bfd_elf_symbol_refs_local_p, _bfd_elf_add_dynamic_entry): Likewise. (_bfd_elf_strip_zero_sized_dynamic_sections): Likewise. (_bfd_elf_link_check_relocs, elf_link_add_object_symbols): Likewise. (bfd_elf_final_link): Likewise. * elfnn-aarch64.c (elfNN_aarch64_setup_section_lists): Likewise. * elf64-ppc.c (ppc64_elf_set_toc): Likewise. Use bfd_link_hash_lookup. ld/ * emultempl/mipself.em (mips_create_output_section_statements): Pass base type of hash table to is_elf_hash_table. * ldelf.c (ldelf_after_open): Likewise.
2021-04-12PR27719, lang_mark_undefineds trashes memoryAlan Modra5-5/+16
It's not enough to test that the output is ELF before casting bfd_link_hash_entry to elf_link_hash_entry. Some ELF targets (d30v, dlx, pj, s12z, xgate) use the generic linker support in bfd/linker.c and thus their symbols are of type generic_link_hash_entry. Not all of the places this patch touches can result in wrong accesses, but I thought it worth ensuring that all occurrences of elf_link_hash_entry in ld/ were obviously correct. PR 27719 * ldlang.c (lang_mark_undefineds, undef_start_stop): Test that the symbol hash table is the correct type before accessing elf_link_hash_entry symbols. * plugin.c (is_visible_from_outside): Likewise. * emultempl/armelf.em (ld${EMULATION_NAME}_finish): Likewise. * emultempl/solaris2.em (elf_solaris2_before_allocation): Likewise.
2021-04-09PowerPC disassembly of pcrel referencesAlan Modra12-56/+70
This adds some annotation to Power10 pcrel instructions, displaying the target address (ie. pc + D34 field) plus a symbol if there is one at exactly that target address. pld from the .got or .plt will also look up the entry and display it, symbolically if there is a dynamic relocation on the entry. include/ * dis-asm.h (struct disassemble_info): Add dynrelbuf and dynrelcount. binutils/ * objdump.c (struct objdump_disasm_info): Delete dynrelbuf and dynrelcount. (find_symbol_for_address): Adjust for dynrelbuf and dynrelcount move. (disassemble_section, disassemble_data): Likewise. opcodes/ * ppc-dis.c (struct dis_private): Add "special". (POWERPC_DIALECT): Delete. Replace uses with.. (private_data): ..this. New inline function. (disassemble_init_powerpc): Init "special" names. (skip_optional_operands): Add is_pcrel arg, set when detecting R field of prefix instructions. (bsearch_reloc, print_got_plt): New functions. (print_insn_powerpc): For pcrel instructions, print target address and symbol if known, and decode plt and got loads too. gas/ * testsuite/gas/ppc/prefix-pcrel.d: Update expected output. * testsuite/gas/ppc/prefix-reloc.d: Likewise. * gas/testsuite/gas/ppc/vsx_32byte.d: Likewise. ld/ * testsuite/ld-powerpc/inlinepcrel-1.d: Update expected output. * testsuite/ld-powerpc/inlinepcrel-2.d: Likewise. * testsuite/ld-powerpc/notoc2.d: Likewise. * testsuite/ld-powerpc/notoc3.d: Likewise. * testsuite/ld-powerpc/pcrelopt.d: Likewise. * testsuite/ld-powerpc/startstop.d: Likewise. * testsuite/ld-powerpc/tlsget.d: Likewise. * testsuite/ld-powerpc/tlsget2.d: Likewise. * testsuite/ld-powerpc/tlsld.d: Likewise. * testsuite/ld-powerpc/weak1.d: Likewise. * testsuite/ld-powerpc/weak1so.d: Likewise.
2021-04-06ld: warn about PE base relocations to sections above .relocJan Beulich2-1/+15
Due to a bogus linker script, or perhaps because a section doesn't get placed by a linker script while default placement puts it too high up, sections can end up above .reloc. Since the process of determining its contents (and hence its size) happens before final section placement, relocations needed for such sections would no longer point at the correct address in the final binary. Warn about this (down the road this may want to become an error, unless size determination and content creation for .reloc would get decoupled). To avoid triggering the warning when .reloc gets discarded, suppress populating the section in the first place in this case.
2021-04-05C99 ld configuryAlan Modra7-1573/+633
* configure.ac: Move initfini-array arg handling earlier. Don't check for string.h, strings.h, stdlib.h, or locale.h. Do check for inttypes.h, stdint.h, sys/types.h. Don't check for setlocale, free, getev or strstr. (AC_ISC_POSIX): Don't invoke. * sysdep.h: Include string.h and stdlib.h unconditionally. Test HAVE_SYS_TYPE_H and HAVE_SYS_STAT_H. Remove strstr, free and getenv fallback declarations. * ld.h: Don't test HAVE_LOCALE_H. * ldmain.c: Don't test HAVE_SETLOCALE. * config.in: Regenerate. * configure: Regenerate.
2021-04-01PE/Windows x86_64: Fix weak undef symbols after image base changeTamar Christina4-0/+78
The change in PR19011 changed the image load address from being in the lower 32-bit address space to the higher 64-bit address space. However when you have a weak undef symbol which stays undef at the end of linking the linker has to resolve this (Windows loader does not support undef symbols). As such typically these would resolve to 0. The relocation used for these weak symbols are the normal 32-bit PC_REL call relocs. So when doing the overflow check LD checks if the distance between the symbol and the call is within range. However now that the load address is > 32-bits and the symbol val is 0 this overflow check will always fail. As such the linker gives a bogus error. This patch makes the linker not emit the overflow failure but chooses to still let the check be performed (as it's mid-end code). One down side of this is that it does break the common convention that the call be to sym at 0x0. i.e. before you'd get 401015: 74 05 je 40101c 401017: e8 e4 ef bf ff callq 0 and now you get 140001015: 74 05 je 14000101c 140001017: e8 e4 ef ff bf call 100000000 since the call is PC_REL there's no way to get the range large enough to resolve to 0. As such I have chosen to leave it as the furthest simple range that we can still represent. By only ignoring the error we leave the symbol value itself to still be 0 such that the if(<symbol>) checks still work correctly. bfd/ChangeLog: 2021-04-01 Tamar Christina <tamar.christina@arm.com> PR ld/26659 * cofflink.c (_bfd_coff_generic_relocate_section): Ignore overflow. ld/ChangeLog: 2021-04-01 Tamar Christina <tamar.christina@arm.com> PR ld/26659 * testsuite/ld-pe/pe.exp: Add test. * testsuite/ld-pe/pr26659-weak-undef-sym.d: New test. * testsuite/ld-pe/pr26659-weak-undef-sym.s: New test.
2021-04-01Remove strneq macro and use startswith.Martin Liska2-4/+9
bfd/ChangeLog: * ecoff.c (strneq): Remove strneq and use startswith. (_bfd_ecoff_slurp_armap): Likewise. binutils/ChangeLog: * elfcomm.h (strneq): Remove strneq and use startswith. * readelf.c (ia64_process_unwind): Likewise. (process_note): Likewise. gas/ChangeLog: * config/obj-coff.c (strneq): Remove strneq and use startswith. (weak_is_altname): Likewise. (obj_coff_section): Likewise. * config/tc-cr16.c (process_label_constant): Likewise. * config/tc-crx.c (strneq): Likewise. include/ChangeLog: * opcode/cr16.h (strneq): Remove strneq and use startswith. ld/ChangeLog: * ldbuildid.c (strneq): Remove strneq and use startswith. (validate_build_id_style): Likewise. (compute_build_id_size): Likewise. opcodes/ChangeLog: * arm-dis.c (strneq): Remove strneq and use startswith. * cr16-dis.c (print_insn_cr16): Likewise. * score-dis.c (streq): Likewise. (strneq): Likewise. * score7-dis.c (strneq): Likewise.
2021-03-31Use bool in ldAlan Modra91-1532/+1571
* sysdep.h (POISON_BFD_BOOLEAN): Define. * configure.ac (elf_list_options, elf_shlib_list_options=false), (elf_plt_unwind_list_options=false): Replace FALSE with false, and TRUE with true. * emulparams/call_nop.sh, * emulparams/cet.sh, * emulparams/dynamic_undefined_weak.sh, * emulparams/elf32b4300.sh, * emulparams/elf32lm32.sh, * emulparams/elf32lr5900.sh, * emulparams/elf32lr5900n32.sh, * emulparams/elf32visium.sh, * emulparams/elf_x86_64.sh, * emulparams/extern_protected_data.sh, * emulparams/plt_unwind.sh, * emulparams/reloc_overflow.sh, * emulparams/static.sh, * emulparams/x86-64-lam.sh, * emultempl/aarch64elf.em, * emultempl/aix.em, * emultempl/alphaelf.em, * emultempl/armcoff.em, * emultempl/armelf.em, * emultempl/avrelf.em, * emultempl/beos.em, * emultempl/bfin.em, * emultempl/cr16elf.em, * emultempl/crxelf.em, * emultempl/cskyelf.em, * emultempl/elf.em, * emultempl/genelf.em, * emultempl/hppaelf.em, * emultempl/linux.em, * emultempl/m68hc1xelf.em, * emultempl/metagelf.em, * emultempl/mipself.em, * emultempl/mmix-elfnmmo.em, * emultempl/mmixelf.em, * emultempl/mmo.em, * emultempl/msp430.em, * emultempl/nios2elf.em, * emultempl/pdp11.em, * emultempl/pe.em, * emultempl/pep.em, * emultempl/ppc32elf.em, * emultempl/ppc64elf.em, * emultempl/rxelf.em, * emultempl/rxlinux.em, * emultempl/scoreelf.em, * emultempl/solaris2.em, * emultempl/spuelf.em, * emultempl/ticoff.em, * emultempl/v850elf.em, * emultempl/vms.em, * emultempl/xtensaelf.em, * emultempl/z80.em, * ld.h, * ldbuildid.c, * ldbuildid.h, * ldcref.c, * ldctor.c, * ldctor.h, * ldelf.c, * ldelf.h, * ldelfgen.c, * ldelfgen.h, * ldemul.c, * ldemul.h, * ldexp.c, * ldexp.h, * ldfile.c, * ldfile.h, * ldgram.y, * ldlang.c, * ldlang.h, * ldmain.c, * ldmain.h, * ldmisc.c, * ldmisc.h, * ldwrite.c, * lexsup.c, * mri.c, * pe-dll.c, * pe-dll.h, * pep-dll.h, * plugin.c, * plugin.h, * testplug.c, * testplug2.c, * testplug3.c, * testplug4.c: Replace bfd_boolean with bool, FALSE with false, and TRUE with true. * configure: Regenerate.
2021-03-31Remove bfd_stdint.hAlan Modra18-19/+39
If we require C99 for binutils then stdint.h is available. bfd/ * .gitignore: Delete bfd_stdint.h entry. * Makefile.am (bfdinclude_HEADERS): Delete bfd_stdint.h. (BUILD_HFILES, LOCAL_H_DEPS): Likewise. * bfd-in.h: Include stdint.h in place of bfd_stdint.h. * configure.ac: Don't invoke GCC_HEADER_STDINT. * configure.com: Don't create bfd_stdint.h. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * bfd-in2.h: Regenerate. * config.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate. binutils/ * coffdump.c: Include stdint.h in place of bfd_stdint.h. * dwarf.c: Likewise. gas/ * config/tc-aarch64.c: Include stdint.h in place of bfd_stdint.h. * config/tc-crx.c: Likewise. * config/tc-nds32.h: Likewise. include/ * cgen/basic-modes.h: Include stdint.h in place of bfd_stdint.h. * elf/nfp.h: Likewise. * opcode/aarch64.h: Likewise. * opcode/cgen.h: Likewise. * opcode/nfp.h: Likewise. * opcode/ppc.h: Likewise. ld/ * elf-hints-local.h: Include stdint.h in place of bfd_stdint.h. * emultempl/nds32elf.em: Likewise. * testsuite/ld-elf/mbind2b.c: Likewise. * testsuite/ld-elf/pr18718.c: Likewise. * testsuite/ld-elf/pr18720a.c: Likewise. * testsuite/ld-elf/pr25749-1.c: Likewise. * testsuite/ld-elf/pr25749-1a.c: Likewise. * testsuite/ld-elf/pr25749-1b.c: Likewise. * testsuite/ld-elf/pr25749-1c.c: Likewise. * testsuite/ld-elf/pr25749-1d.c: Likewise. * testsuite/ld-elf/pr25749-2.c: Likewise. * testsuite/ld-elf/pr25754-1a.c: Likewise. * testsuite/ld-elf/pr25754-2a.c: Likewise. * testsuite/ld-elf/pr25754-3a.c: Likewise. * testsuite/ld-elf/pr25754-4a.c: Likewise. * testsuite/ld-elf/pr25754-5a.c: Likewise. * testsuite/ld-elf/pr25754-6a.c: Likewise. opcodes/ * aarch64-dis.c: Include stdint.h in place of bfd_stdint.h. * aarch64-dis.h: Likewise. * aarch64-opc.c: Likewise. * avr-dis.c: Likewise. * csky-dis.c: Likewise. * nds32-asm.c: Likewise. * nds32-dis.c: Likewise. * nfp-dis.c: Likewise. * riscv-dis.c: Likewise. * s12z-dis.c: Likewise. * wasm32-dis.c: Likewise.
2021-03-29TRUE/FALSE simplificationAlan Modra4-5/+11
There is really no need to write code like "foo != 0 ? TRUE : FALSE" unless we had stupidly defined FALSE as something other than 0 or TRUE as something other than 1. The simpler "foo != 0" does just as well. Similarly "(condition == TRUE)" or "(condition == FALSE) can be simplified to "(condition)" and "(!condition)" respectively. I'll note that there is reason to use "integer_expression != 0" when assigning a bfd_boolean rather than the simpler "integer_expression", if you expect the variable to have 0 or 1 value. It's probably even a good idea to not rely on implicit conversion if bfd_boolean were _Bool. bfd/ * aoutx.h (aout_link_write_symbols): Don't cast boolean expression to bfd_boolean. * elf32-or1k.c (or1k_set_got_and_rela_sizes): Dont compare booleans against FALSE. * elf32-arc.c (name_for_global_symbol): Don't compare boolean to TRUE. (is_reloc_PC_relative): Don't use "boolean_condition ? TRUE : FALSE". (is_reloc_SDA_relative, is_reloc_for_GOT): Likewise. (is_reloc_for_PLT, is_reloc_for_TLS): Likewise. * elf32-arm.c (stm32l4xx_need_create_replacing_stub): Likewise. * elf32-nds32.c (insert_nds32_elf_blank): Likewise. * elf32-rx.c (rx_set_section_contents): Likewise. * elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Likewise. * elfxx-mips.c (_bfd_mips_elf_ignore_undef_symbol): Likewise. * mach-o.c (bfd_mach_o_read_command): Likewise. * targets.c (bfd_get_target_info): Likewise. binutils/ * dlltool.c (main): Don't use "boolean_condition ? TRUE : FALSE". * dwarf.c (read_and_display_attr_value): Likewise. (display_debug_str_offsets): Likewise. * objdump.c (dump_bfd): Likewise. * readelf.c (dump_section_as_strings): Likewise. (dump_section_as_bytes): Likewise. gas/ * atof-generic.c (FALSE, TRUE): Don't define. * config/obj-elf.h (FALSE, TRUE): Don't define. * config/obj-som.h (FALSE, TRUE): Don't define. * config/tc-hppa.h (FALSE, TRUE): Don't define. * config/tc-pdp11.c (FALSE, TRUE): Don't define. * config/tc-iq2000.h (obj_fix_adjustable): Delete. * config/tc-m32r.h (TC_FIX_ADJUSTABLE): Delete. * config/tc-mt.h (obj_fix_adjustable): Delete. * config/tc-nds32.h (TC_FIX_ADJUSTABLE): Delete. * config/tc-arc.c (parse_opcode_flags): Simplify boolean expression. (relaxable_flag, relaxable_operand, assemble_insn): Likewise. (tokenize_extregister): Likewise. * config/tc-csky.c (parse_opcode, get_operand_value): Likewise. (parse_operands_op, parse_operands, md_assemble): Likewise. * config/tc-d10v.c (build_insn): Likewise. * config/tc-score.c (s3_gen_insn_frag): Likewise. * config/tc-score7.c (s7_gen_insn_frag, s7_relax_frag): Likewise. * config/tc-tic6x.c (tic6x_update_features, md_assemble): Likewise. * config/tc-z80.c (emit_byte): Likewise. include/ * opcode/aarch64.h (alias_opcode_p): Simplify boolean expression. (opcode_has_alias, pseudo_opcode_p, optional_operand_p): Likewise. (opcode_has_special_coder): Likewise. ld/ * emultempl/aix.em (gld${EMULATION_NAME}_before_allocation): Simplify boolean expression. * lexsup.c (parse_args): Likewise. * pe-dll.c (pe_dll_id_target): Likewise. opcodes/ * aarch64-opc.c (vector_qualifier_p): Simplify boolean expression. (fp_qualifier_p, get_data_pattern): Likewise. (aarch64_get_operand_modifier_from_value): Likewise. (aarch64_extend_operator_p, aarch64_shift_operator_p): Likewise. (operand_variant_qualifier_p): Likewise. (qualifier_value_in_range_constraint_p): Likewise. (aarch64_get_qualifier_esize): Likewise. (aarch64_get_qualifier_nelem): Likewise. (aarch64_get_qualifier_standard_value): Likewise. (get_lower_bound, get_upper_bound): Likewise. (aarch64_find_best_match, match_operands_qualifier): Likewise. (aarch64_print_operand): Likewise. * aarch64-opc.h (operand_has_inserter, operand_has_extractor): Likewise. (operand_need_sign_extension, operand_need_shift_by_two): Likewise. (operand_need_shift_by_four, operand_maybe_stack_pointer): Likewise. * arm-dis.c (print_insn_mve, print_insn_thumb32): Likewise. * tic6x-dis.c (tic6x_check_fetch_packet_header): Likewise. (print_insn_tic6x): Likewise.
2021-03-25ld: do not rely on the exact size of the CTF symtypetabs in test resultsNick Alcock6-8/+18
The data object and function info sections (collectively "symtypetabs") usually (i.e. if non-indexed) have sizes defined by the size of the ELF dynamic symbol table in the object they are linked to. This means test results should not depend on the exact sizes of these sections, because adding entirely irrelevant symbols to the dynsym can cause spurious test failures. (This also means we should not match the offset of sections that follow them, since those too depend on the exact size of the symtypetab sections.) Spotted by turning the sanitizer on, which introduced new dynsym entries and expanded the symtypetab sizes to match. ld/ChangeLog 2021-03-25 Nick Alcock <nick.alcock@oracle.com> * testsuite/ld-ctf/array.d: Only check that the data object section is nonempty: do not check its exact size. * testsuite/ld-ctf/diag-parlabel.d: Likewise. * testsuite/ld-ctf/slice.d: Likewise. * testsuite/ld-ctf/data-func-conflicted.d: Likewise, and for the func info section too. * testsuite/ld-ctf/function.d: Likewise, for the func info section.
2021-03-22Add startswith function and use it instead of CONST_STRNEQ.Martin Liska15-33/+58
bfd/ChangeLog: * bfd-in.h (startswith): Add startswith function. (CONST_STRNEQ): Remove. * bfd-in2.h (startswith): Regenerate with make headers. * archive.c (bfd_slurp_armap): Replace usage of CONST_STRNEQ with startswith. (_bfd_slurp_extended_name_table): Likewise. * archive64.c (_bfd_archive_64_bit_slurp_armap): Likewise. * bfd.c (bfd_get_sign_extend_vma): Likewise. (bfd_convert_section_size): Likewise. (bfd_convert_section_contents): Likewise. * coff-stgo32.c (go32exe_create_stub): Likewise. (go32exe_check_format): Likewise. * coffcode.h (styp_to_sec_flags): Likewise. (GNU_DEBUGALTLINK): Likewise. * coffgen.c (_bfd_coff_section_already_linked): Likewise. (coff_gc_sweep): Likewise. (bfd_coff_gc_sections): Likewise. * cofflink.c (coff_link_add_symbols): Likewise. (process_embedded_commands): Likewise. * compress.c (bfd_is_section_compressed_with_header): Likewise. (bfd_init_section_decompress_status): Likewise. * dwarf2.c (find_debug_info): Likewise. (place_sections): Likewise. * ecoff.c (_bfd_ecoff_slurp_armap): Likewise. * elf-m10300.c (_bfd_mn10300_elf_size_dynamic_sections): Likewise. * elf.c (_bfd_elf_make_section_from_shdr): Likewise. (assign_section_numbers): Likewise. (elfcore_grok_win32pstatus): Likewise. * elf32-arm.c (cmse_scan): Likewise. (elf32_arm_gc_mark_extra_sections): Likewise. (elf32_arm_size_dynamic_sections): Likewise. (is_arm_elf_unwind_section_name): Likewise. * elf32-bfin.c (bfin_size_dynamic_sections): Likewise. * elf32-cr16.c (_bfd_cr16_elf_size_dynamic_sections): Likewise. * elf32-cris.c (elf_cris_size_dynamic_sections): Likewise. * elf32-csky.c (csky_elf_size_dynamic_sections): Likewise. * elf32-hppa.c (elf32_hppa_size_dynamic_sections): Likewise. * elf32-iq2000.c (iq2000_elf_check_relocs): Likewise. * elf32-lm32.c (lm32_elf_size_dynamic_sections): Likewise. * elf32-m32r.c (m32r_elf_size_dynamic_sections): Likewise. * elf32-m68k.c (elf_m68k_size_dynamic_sections): Likewise. * elf32-metag.c (elf_metag_size_dynamic_sections): Likewise. * elf32-msp430.c (msp430_elf_relax_delete_bytes): Likewise. * elf32-nios2.c (nios2_elf32_size_dynamic_sections): Likewise. * elf32-or1k.c (or1k_elf_size_dynamic_sections): Likewise. * elf32-ppc.c (ppc_elf_size_dynamic_sections): Likewise. * elf32-s390.c (elf_s390_size_dynamic_sections): Likewise. * elf32-score.c (s3_bfd_score_elf_size_dynamic_sections): Likewise. * elf32-score7.c (s7_bfd_score_elf_size_dynamic_sections): Likewise. * elf32-sh.c (sh_elf_size_dynamic_sections): Likewise. * elf32-tic6x.c (is_tic6x_elf_unwind_section_name): Likewise. (elf32_tic6x_size_dynamic_sections): Likewise. * elf32-vax.c (elf_vax_size_dynamic_sections): Likewise. * elf32-xtensa.c (elf_xtensa_size_dynamic_sections): Likewise. (xtensa_is_insntable_section): Likewise. (xtensa_is_littable_section): Likewise. (xtensa_is_proptable_section): Likewise. (xtensa_property_section_name): Likewise. (xtensa_callback_required_dependence): Likewise. * elf64-alpha.c (elf64_alpha_size_dynamic_sections): Likewise. * elf64-hppa.c (elf64_hppa_size_dynamic_sections): Likewise. * elf64-ia64-vms.c (is_unwind_section_name): Likewise. (get_reloc_section): Likewise. (elf64_ia64_size_dynamic_sections): Likewise. (elf64_ia64_object_p): Likewise. * elf64-mmix.c (mmix_elf_add_symbol_hook): Likewise. * elf64-ppc.c (ppc64_elf_size_dynamic_sections): Likewise. * elf64-s390.c (elf_s390_size_dynamic_sections): Likewise. * elflink.c (elf_link_add_object_symbols): Likewise. (_bfd_elf_gc_mark_extra_sections): Likewise. (bfd_elf_parse_eh_frame_entries): Likewise. (_bfd_elf_section_already_linked): Likewise. * elfnn-aarch64.c (elfNN_aarch64_size_dynamic_sections): Likewise. * elfnn-ia64.c (is_unwind_section_name): Likewise. (elfNN_ia64_size_dynamic_sections): Likewise. (elfNN_ia64_object_p): Likewise. * elfxx-mips.c (FN_STUB_P): Likewise. (CALL_STUB_P): Likewise. (CALL_FP_STUB_P): Likewise. (_bfd_mips_elf_section_from_shdr): Likewise. (_bfd_mips_elf_fake_sections): Likewise. (_bfd_mips_elf_size_dynamic_sections): Likewise. (_bfd_mips_final_write_processing): Likewise. (_bfd_mips_elf_final_link): Likewise. * elfxx-sparc.c (_bfd_sparc_elf_size_dynamic_sections): Likewise. * elfxx-x86.c (elf_i386_is_reloc_section): Likewise. (elf_x86_64_is_reloc_section): Likewise. * hpux-core.c (thread_section_p): Likewise. * libcoff.h (bfd_pei_p): Likewise. * linker.c (REAL): Likewise. (unwrap_hash_lookup): Likewise. (_bfd_generic_link_add_one_symbol): Likewise. * mmo.c (mmo_internal_write_section): Likewise. * osf-core.c (osf_core_core_file_p): Likewise. * pef.c (bfd_pef_print_symbol): Likewise. * pei-x86_64.c (pex64_print_all_pdata_sections): Likewise. * som.c (som_slurp_symbol_table): Likewise. (som_slurp_armap): Likewise. * wasm-module.c (wasm_compute_custom_section_file_position): Likewise. binutils/ChangeLog: * dlltool.c (scan_drectve_symbols): Replace usage of CONST_STRNEQ with startswith. * emul_aix.c (ar_emul_aix_parse_arg): Likewise. * objcopy.c (is_mergeable_note_section): Likewise. * objdump.c (dump_dwarf_section): Likewise. * prdbg.c (pr_method_type): Likewise. (pr_class_baseclass): Likewise. (tg_class_baseclass): Likewise. * readelf.c (process_lto_symbol_tables): Likewise. * stabs.c (ULLHIGH): Likewise. (parse_stab_argtypes): Likewise. (stab_demangle_function_name): Likewise. gas/ChangeLog: * config/tc-i386.c (md_parse_option): Replace usage of CONST_STRNEQ with startswith. (x86_64_section_word): Likewise. * config/tc-sparc.c (md_parse_option): Likewise. gdb/ChangeLog: * arm-tdep.c (show_disassembly_style_sfunc): Replace usage of CONST_STRNEQ with startswith. (_initialize_arm_tdep): Likewise. ld/ChangeLog: * emultempl/aix.em: Replace usage of CONST_STRNEQ with startswith. * emultempl/beos.em: Likewise. * emultempl/elf.em: Likewise. * emultempl/pe.em: Likewise. * emultempl/pep.em: Likewise. * emultempl/xtensaelf.em: Likewise. * ldctor.c (ctor_prio): Likewise. * ldelf.c (ldelf_try_needed): Likewise. (ldelf_parse_ld_so_conf): Likewise. (ldelf_after_open): Likewise. (output_rel_find): Likewise. (ldelf_place_orphan): Likewise. * ldfile.c (ldfile_add_library_path): Likewise. * ldlang.c (lang_add_input_file): Likewise. * ldmain.c (get_sysroot): Likewise. (get_emulation): Likewise. (add_archive_element): Likewise. * ldwrite.c (unsplittable_name): Likewise. (clone_section): Likewise. * lexsup.c (parse_args): Likewise. * pe-dll.c (is_import): Likewise. (pe_implied_import_dll): Likewise. opcodes/ChangeLog: * aarch64-dis.c (parse_aarch64_dis_option): Replace usage of CONST_STRNEQ with startswith. * arc-dis.c (parse_option): Likewise. * arm-dis.c (parse_arm_disassembler_options): Likewise. * cris-dis.c (print_with_operands): Likewise. * h8300-dis.c (bfd_h8_disassemble): Likewise. * i386-dis.c (print_insn): Likewise. * ia64-gen.c (fetch_insn_class): Likewise. (parse_resource_users): Likewise. (in_iclass): Likewise. (lookup_specifier): Likewise. (insert_opcode_dependencies): Likewise. * mips-dis.c (parse_mips_ase_option): Likewise. (parse_mips_dis_option): Likewise. * s390-dis.c (disassemble_init_s390): Likewise. * wasm32-dis.c (parse_wasm32_disassembler_options): Likewise.
2021-03-19x86-64: Add a testcase for PR ld/27590H.J. Lu5-0/+24
PR ld/27590 * testsuite/ld-x86-64/pr27590.rd: New file. * testsuite/ld-x86-64/pr27590a.obj.bz2: Likewise. * testsuite/ld-x86-64/pr27590b.obj.bz2: Likewise. * testsuite/ld-x86-64/x86-64.exp: Run ld/27590 test.
2021-03-20DWARF LTO debug sections vs. .stabstrAlan Modra2-2/+9
The exception for debug sections in clearing SEC_EXCLUDE when relocatable was really for one specific debug section, so let's make it do just that. bfd/ PR 27590 * elf.c (_bfd_elf_make_section_from_shdr): Remove SHF_EXCLUDE test for .gnu.debuglto*. ld/ PR 27590 * ldlang.c (lang_gc_sections): Clear SEC_EXCLUDE when relocatable for all sections except .stabstr.
2021-03-19pr27590 testcase fixesAlan Modra3-4/+15
PR 27590 * testsuite/ld-elf/pr27590a.d: Match relocs using label, and R_MIPS_NONE. * testsuite/ld-elf/pr27590b.d: Likewise.
2021-03-18elf: Handle .gnu.debuglto_.debug_* sectionsH.J. Lu5-2/+42
commit 994b25132814f4c2be93ce53a616a74139c4cf3c Author: H.J. Lu <hjl.tools@gmail.com> Date: Sun Jan 17 20:01:16 2021 -0800 ld/elf: Ignore section symbols when matching linkonce with comdat ignored section symbols when comparing symbols in 2 sections. Since all references to debugging sections are done with section symbols, symbols in debugging sections are ignored and we fail to match symbols in comdat debugging sections. Also .gnu.debuglto_.debug_* sections aren't treated as debugging sections. 1. Treate .gnu.debuglto_.debug_ section as debugging section unless it is marked with SHF_EXCLUDE. 2. Revert commit 994b2513281 in elf_create_symbuf. 3. Ignore section symbols only when matching non-debugging sections or linkonce section with comdat section. bfd/ PR ld/27590 * elf.c (_bfd_elf_make_section_from_shdr): Treate .gnu.debuglto_.debug_ section as debugging section unless it is marked with SHF_EXCLUDE. * elflink.c (elf_create_symbuf): Revert commit 994b2513281. (bfd_elf_match_symbols_in_sections): Ignore section symbols when matching non-debugging sections or linkonce section with comdat section. ld/ PR ld/27590 * testsuite/ld-elf/pr27590.s: New file. * testsuite/ld-elf/pr27590a.d: Likewise. * testsuite/ld-elf/pr27590b.d: Likewise. * testsuite/ld-i386/i386.exp: Also run ld/27193 test with --reduce-memory-overheads.
2021-03-18DWARF: Check version >= 3 for DW_FORM_ref_addrH.J. Lu5-0/+16
Check version >= 3, instead of version == 3 || version == 4, for DW_FORM_ref_addr. bfd/ PR ld/27587 * dwarf2.c (read_attribute_value): Check version >= 3 for DW_FORM_ref_addr. ld/ PR ld/27587 * testsuite/ld-x86-64/pr27587.err: New file. * testsuite/ld-x86-64/pr27587a.obj.bz2: Likewise. * testsuite/ld-x86-64/pr27587b.obj.bz2: Likewise. * testsuite/ld-x86-64/x86-64.exp: Run PR ld/27587 test.
2021-03-18libctf: support encodings for enumsNick Alcock3-2/+10
The previous commit started to error-check the lookup of ctf_type_encoding for the underlying type that is internally done when carrying out a ctf_type_encoding on a slice. Unfortunately, enums have no encoding, so this has historically been returning an error (which is ignored) and then populating the cte_format with uninitialized data. Now the error is not ignored, this is returning an error, which breaks linking of CTF containing bitfields of enumerated type. CTF format v3 does not record the actual underlying type of a enum, but we can mock up something that is not *too* wrong, and that is at any rate better than uninitialized data. ld/ChangeLog 2021-03-18 Nick Alcock <nick.alcock@oracle.com> * testsuite/ld-ctf/slice.c: Check slices of enums too. * testsuite/ld-ctf/slice.d: Results adjusted. libctf/ChangeLog 2021-03-18 Nick Alcock <nick.alcock@oracle.com> * ctf-types.c (ctf_type_encoding): Support, after a fashion, for enums. * ctf-dump.c (ctf_dump_format_type): Do not report enums' degenerate encoding.
2021-03-16Fix potentially undefined behaviour use of strcpcy.Nick Clifton2-1/+8
* pe-dll.c (pe_find_cdecl_alias_match): Use memmove to overwrite lname string.
2021-03-15ld: don't chance overrunning PE .reloc section contentJan Beulich2-3/+4
The allocation of reloc_d doesn't take reloc_s->size into account. There is already padding being emitted up to the allocated size. While reloc_s->size ought to still be zero at this point anyway (and hence the code being deleted would have been just dead), don't risk writing past the actual allocation.
2021-03-12riscv --enable-targets=all on 32-bit hostAlan Modra3-12/+18
Attempting to build --enable-targets=all on a 32-bit host results in a number of errors like the following. eelf32lriscv.o: in function `gldelf32lriscv_after_allocation': eelf32lriscv.c:98: undefined reference to `bfd_elf32_riscv_restart_relax_sections' That's due to needing --enable-64-bit-bfd to get the riscv BFD support built. * Makefile.am (ALL_EMULATION_SOURCES): Move riscv files to.. (ALL_64_EMULATION_SOURCES): ..here. * Makefile.in: Regenerate.
2021-03-12aix: implement TLS relocation for gas and ldClément Chigot12-1/+264
Add support for TLS in XCOFF. Amongst the things done by this commit: - Update XCOFF auxialiary header to match new version and allow TLS sections. - Add TLS sections (.tdata and .tbss) support in gas and ld. - Add support for the TLS relocations in gas and ld. Two different types BFD_RELOC are created for PPC and PPC64 as the size is a pointer, thus distinct in 32 or 64bit. The addresses given by ld to .tdata and .tbss is a bit special. In XCOFF, these addresses are actually offsets from the TLS pointer computed at runtime. AIX assembly and linker does the same. In top of that, the .tdata must be before .data (this is mandatory for AIX loader). Thus, the aix ld script is recomputing "." before .data to restore its original value. There might be a simpler way, but this one is working. Optimisation linked to TLS relocations aren't yet implemented. bfd/ * reloc.c (BFD_RELOC_PPC_TLS_LE, BFD_RELOC_PPC_TLS_IE, BFD_RELOC_PPC_TLS_M, BFD_RELOC_PPC_TLS_ML, BFD_RELOC_PPC64_TLS_GD, BFD_RELOC_PPC64_TLS_LD, BFD_RELOC_PPC64_TLS_LE, BFD_RELOC_PPC64_TLS_IE, BFD_RELOC_PPC64_TLS_M, BFD_RELOC_PPC64_TLS_ML): New relocations. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * coff-rs6000.c (xcoff_calculate_relocation): Call xcoff_reloc_type_tls for TLS relocations. (xcoff_howto_table): Implement TLS relocations. (_bfd_xcoff_reloc_type_lookup): Add cases TLS relocations. (xcoff_reloc_type_tls): New function. * coff64-rs6000.c (xcoff_calculate_relocation): Likewise. (xcoff_howto_table): Likewise. (_bfd_xcoff_reloc_type_lookup): Likewise. * coffcode.h (sec_to_styp_flags): Handle TLS sections. (styp_to_sec_flags): Likewise. (coff_compute_section_file_positions): Avoid file offset optimisation for .data when the previous section is .tdata. (coff_write_object_contents): Handle TLS sections. * coffswap.h (coff_swap_aouthdr_out): Add support for new fields in aouthdr. * libxcoff.h (xcoff_reloc_type_tls): Add prototype. * xcofflink.c (xcoff_link_add_symbols): Handle XMC_UL. (xcoff_need_ldrel_p): Add cases for TLS relocations. (xcoff_create_ldrel): Add l_symndx for TLS sections. gas/ * config/tc-ppc.c (ppc_xcoff_text_section, ppc_xcoff_data_section, (ppc_xcoff_bss_section, ppc_xcoff_tdata_section, (ppc_xcoff_tbss_section): New variables. (ppc_text_subsegment, ppc_text_csects, ppc_data_subgments, (ppc_data_csects): Removed. (ppc_xcoff_section_is_initialized, ppc_init_xcoff_section, ppc_xcoff_parse_cons): New functions. (md_being): Initialize XCOFF sections. (ppc_xcoff_suffix): Add support for TLS relocations (fixup_size, md_apply_fix): Add support for new BFD_RELOC. (ppc_change_csect): Handle XMC_TL, XMC_UL. Correctly, add XMC_BS to .bss section. Handle new XCOFF section variables. (ppc_comm): Likewise. (ppc_toc): Likewise. (ppc_symbol_new_hook): Likewise. (ppc_frob_symbol): Likewise. (ppc_fix_adjustable): Add tbss support. * config/tc-ppc.h (TC_PARSE_CONS_EXPRESSION): New define. (ppc_xcoff_parse_cons): Add prototype. (struct ppc_xcoff_section): New structure. ld/ * emultempl/aix.em: Ensure .tdata section is removed if empty, even with -r flag. * scripttempl/aix.sc: Handle TLS sections. * testsuite/ld-powerpc/aix52.exp: Add new tests. * testsuite/ld-powerpc/aix-tls-reloc-32.d: New test. * testsuite/ld-powerpc/aix-tls-reloc-64.d: New test. * testsuite/ld-powerpc/aix-tls-reloc.ex: New test. * testsuite/ld-powerpc/aix-tls-reloc.s: New test. * testsuite/ld-powerpc/aix-tls-section-32.d: New test. * testsuite/ld-powerpc/aix-tls-section-64.d: New test. * testsuite/ld-powerpc/aix-tls-section.ex: New test. * testsuite/ld-powerpc/aix-tls-section.s: New test. include/ * coff/internal.h (struct internal_aouthdr): Add new fields. * coff/rs6000.h (AOUTHDRÃ): Add new fields. * coff/rs6k64.h (struct external_filehdr): Likewise. * coff/xcoff.h (_TDATA), _TBSS): New defines (RS6K_AOUTHDR_TLS_LE, RS6K_AOUTHDR_RAS, RS6K_AOUTHDR_ALGNTDATA, RS6K_AOUTHDR_SHR_SYMTAB, RS6K_AOUTHDR_FORK_POLICY, RS6K_AOUTHDR_FORK_COR): New defines. (XMC_TU): Removed. (XMC_UL): New define.
2021-03-12aix: implement R_TOCU and R_TOCL relocationsClément Chigot7-0/+94
Implement support for largetoc on XCOFF. R_TOCU and R_TOCL are referenced by the new BFD defines: BFD_RELOC_PPC_TOC16_HI and BFD_RELOC_PPC_TOC16_LO. A new toc storage class is added XMC_TE. In order to correctly handle R_TOCU, the logic behind xcoff_reloc_type_toc is changed to compute the whole TOC offset instead of just the difference between the "link" offset and the "assembly" offset. In gas, add a function to transform addis format used by AIX "addis RT, D(RA)" into the ELF format "addis RT, RA, SI". bfd/ * reloc.c (BFD_RELOC_PPC_TOC16_HI, BFD_RELOC_PPC_TOC16_LO): New relocations. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * coff-rs6000.c (xcoff_calculate_relocation): Call xcoff_reloc_type_toc for R_TOCU and R_TOCL. (xcoff_howto_table): Remove src_mask for TOC relocations. Add R_TOCU and R_TOCL howtos. (_bfd_xcoff_reloc_type_lookup): Add cases for BFD_RELOC_PPC_TOC16_HI and BFD_RELOC_PPC_TOC16_LO. (xcoff_reloc_type_toc): Compute the whole offset. Implement R_TOCU and R_TOCL. * coff64-rs6000.c (xcoff64_calculate_relocation): Likewise. (xcoff64_howto_table): Likewise. (xcoff64_reloc_type_lookup): Likewise. gas/ * config/tc-ppc.c (ppc_xcoff_suffix): New function. (MAP, MAP32, MAP64): New macros for XCOFF. (ppc_xcoff_fixup_addis): New function. (ppc_is_toc_sym): Handle XMC_TE. (fixup_size): Add cases for BFD_RELOC_PPC_TOC16_HI and BFD_RELOC_PPC_TOC16_LO. (md_assemble): Call ppc_xcoff_fixup_addis for XCOFF. (ppc_change_csect): Handle XMC_TE. (ppc_tc): Enable .tc symbols to have only a XMC_TC or XMC_TE storage class. (ppc_symbol_new_hook): Handle XMC_TE. (ppc_frob_symbol): Likewise. (ppc_fix_adjustable): Likewise. (md_apply_fix): Handle BFD_RELOC_PPC_TOC16_HI and BFD_RELOC_PPC_TOC16_LO. ld/ * scripttempl/aix.sc: Add .te to .data section. * testsuite/ld-powerpc/aix52.exp: Add test structure for AIX7+. Add aix-largetoc-1 test. * testsuite/ld-powerpc/aix-largetoc-1-32.d: New test. * testsuite/ld-powerpc/aix-largetoc-1-64.d: New test. * testsuite/ld-powerpc/aix-largetoc-1.ex: New test. * testsuite/ld-powerpc/aix-largetoc-1.s: New test.
2021-03-12PE image base falloutAlan Modra7-21/+53
Fixes x86_64-w64-mingw32 tests that failed with the recent diagnosis for out of range RVA, and a couple of other gc-sections tests that failed for other reasons. * testsuite/ld-gc/gc.exp: Pass "-image-base 0" to ld for PE, and arrange to define __main for some run_dump_test tests. * testsuite/ld-gc/pr13683.d: Accept more symbols. * testsuite/ld-gc/pr14265.d: Likewise, and ordering. * testsuite/ld-scripts/crossref.exp: Pass "-image-base 0" to ld for PE. * testsuite/ld-srec/srec.exp: Likewise. * testsuite/lib/ld-lib.exp (ld_link_defsyms): Use is_pecoff_format.
2021-03-11RISC-V: Improve multiple relax passes problem.Nelson Chu5-1/+47
According to the commit abd20cb637008da9d32018b4b03973e119388a0a, an intersting thing is that - the more relax passes, the more chances of relaxations are reduced [1]. Originally, we set the boolean `again` to TRUE once the code is actually deleted, and then we run the relaxations repeatedly if `again` is still TRUE. But `again` only works for the relax pass itself, and won't affect others. That is - we can not use `again` to re-run the relax pass when we already enter into the following passes (can not run the relax passes backwards). Besides, we must seperate the PCREL relaxations into two relax passes for some reasons [2], it make us lose some relax opportunities. This patch try to fix the problem, and the basic idea was come from Jim Wilson - we use a new boolean, restart_relax, to determine if we need to run the whole relax passes again from 0 to 2. Once we have deleted the code between relax pass 0 to 2, the restart_relax will be set to TRUE, we should run the whole relaxations again to give them more chances to shorten the code. We will only enter into the relax pass 3 when the restart_relax is FALSE, since we can't relax anything else once we start to handle the alignments. I have passed the gcc/binutils regressions by riscv-gnu-toolchain, and looks fine for now. [1] https://sourceware.org/pipermail/binutils/2020-November/114223.html [2] https://sourceware.org/pipermail/binutils/2020-November/114235.html bfd/ * elfnn-riscv.c (riscv_elf_link_hash_table): New boolean restart_relax, used to check if we need to run the whole relaxations from relax pass 0 to 2 again. (riscv_elf_link_hash_table_create): Init restart_relax to FALSE. (_bfd_riscv_relax_align): Remove obsolete sec_flg0 set. (_bfd_riscv_relax_delete): Set again to TRUE if we do delete the code. (bfd_elfNN_riscv_restart_relax_sections): New function. Called by after_allocation to check if we need to run the whole relaxations again. (_bfd_riscv_relax_section): We will only enter into the relax pass 3 when the restart_relax is FALSE; At last set restart_relax to TRUE if again is TRUE, too. * elfxx-riscv.h (bfd_elf32_riscv_restart_relax_sections): Declaration. (bfd_elf64_riscv_restart_relax_sections): Likewise. ld/ * emultempl/riscvelf.em (after_allocation): Run ldelf_map_segments many times if riscv_restart_relax_sections returns TRUE. * testsuite/ld-riscv-elf/restart-relax.d: New testcase. Before applying this patch, the call won't be relaxed to jal; But now we have more chances to do relaxations. * testsuite/ld-riscv-elf/restart-relax.s: Likewise. * testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated.
generated by cgit v1.1 at 2024-10-14 16:16:26 +0000