Age | Commit message (Collapse) | Author | Files | Lines |
|
The %pcrel_lo addend may causes the overflow, and need more than one
%pcrel_hi values. But there may be only one auipc, shared by those
%pcrel_lo with addends. However, the existing check method in the
riscv_resolve_pcrel_lo_relocs, may not be able to work for some
special/corner cases.
Consider the testcases pcrel-lo-addend-2b. Before applying this patch,
I can compile it successfully. But in fact the addend cause the value
of %pcrel_hi to be different. This patch try to check the value of
%pcrel_hi directly, to make sure it won't be changed. Otherwise, linker
will report the following errors,
(.text+0xa): dangerous relocation: %pcrel_lo overflow with an addend,
the value of %pcrel_hi is 0x1000 without any addend, but may be 0x2000
after adding the %pcrel_lo addend
The toolchain regressions, rv64gc-linux/rv64gc-elf/rv32gc-linux/rv32i-elf,
pass expectedly and looks fine.
bfd/
* elfnn-riscv.c (riscv_resolve_pcrel_lo_relocs): Check the values
of %pcrel_hi, before and after adding the addend. Make sure the
value won't be changed, otherwise, report dangerous error.
ld/
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated.
* testsuite/ld-riscv-elf/pcrel-lo-addend-2a.d: Renamed from
pcrel-lo-addend-2.
* testsuite/ld-riscv-elf/pcrel-lo-addend-2a.s: Likewise.
* testsuite/ld-riscv-elf/pcrel-lo-addend-2b.d: New testcase.
* testsuite/ld-riscv-elf/pcrel-lo-addend-2b.s: Likewise.
|
|
PR 27834
* ldlex.h (enum option_values): Add OPTION_NO_SYMBOLIC.
* lexsup.c (ld_options): Add -Bno-symbolic.
(parse_args): Handle -Bno-symbolic.
* ld.texi: Document -Bno-symbolic.
* NEWS: Mention -Bno-symbolic.
* testsuite/ld-elf/shared.exp: Add a test.
|
|
The recent change to correct the detection of thumb2 object files
resulted in a ld test for veneering starting to fail. The problem was
the test itself, which was incorrectly expecting thumb1 type far-call
veneers instead of the thumb2 flavour. We already have a dump file of
the expected form, so the fix is to change the expected output
accordingly.
ld/
* testsuite/ld-arm/arm-elf.exp (farcall test for v8-m.mainline):
Correct expected output.
|
|
ld/
* testsuite/ld-x86-64/rela.d: Fix regexp not to presume a specific
address layout, so it works for e.g. --target=x86-64-elf.
|
|
PR 27113
* Makefile.am (install-data-local): Also delete libdep.dll.a if it
is present.
* Makefile.in: Regenerate.
|
|
bfd * elf32-pru.c (elf_backend_can_gc_sections): Define as 1.
ld * testsuite/ld-elf/group8a.d: Remove pru from XFAIL list.
* testsuite/ld-elf/group8b.d: Ditto.
* testsuite/ld-elf/group9a.d: Ditto.
* testsuite/ld-elf/group9b.d: Ditto.
* testsuite/ld-elf/pr12851.d: Ditto.
* testsuite/ld-elf/pr22677.d: Ditto.
* testsuite/lib/ld-lib.exp (check_gc_sections_available): Remove
pru from list.
|
|
be set from the command line.
ld * scripttempl/pru.sc (.resource_table): Add ALIGN directive.
Use symbols for memory sizes.
|
|
Use the pattern from other projects where we generate the html pages
in a dir named the same as the project. So now we have:
gas/doc/gas.html - single html page
gas/doc/gas/ - multiple html pages
This works for projects that have a doc/ subdir already, but gprof &
ld require a little tweaking since they generate their docs in their
respective toplevels.
|
|
This better matches other GNU projects like autoconf/automake where
the html manual is the single page form. We'll support the multi-page
form in a follow up change.
|
|
x86-64 uses rela relocations. The comment next to the field's declaration
says "Non-zero values for ELF USE_RELA targets should be viewed with
suspicion ..." And indeed the fields being non-zero causes section
contents to be accumulated into the final relocated values in addition to
the relocations' addends, which is contrary to the ELF spec.
|
|
* ldelfgen.c (compare_link_order): Ignore section size when
performing a relocateable link.
|
|
In commit 89753bbf81 I enabled a warning for scripts redefining
symbols. The idea was to not warn for symbols defined by shared
libraries (the h->u.def.section->output_section != NULL test), but the
test failed to take into account absolute symbols. Absolute symbols
defined in shared libraries are currently indistinguishable from
absolute symbols defined in relocatable objects, at least when only
looking at struct bfd_link_hash_entry. So, don't warn for any
absolute symbols.
* ldexp.c (update_definedness): Don't return false for absolute
symbols.
* ldmain.c (multiple_definition): Print "warning: " in message
when not a hard error.
|
|
Fixes XPASSes on frv-linux.
* testsuite/ld-elf/pr27825-1.d: Correct xfail.
* testsuite/ld-elf/pr27825-2.d: Likewise.
|
|
The current PLT generation code will generate invalid code when the PLT
relocation offset exceeds 64k. This fixes the issue by detecting large
plt_reloc offsets and generare code sequences to create larger plt
relocations.
The "large" plt code needs 2 extra instructions to create 32-bit offsets.
bfd/ChangeLog:
PR 27746
* elf32-or1k.c (PLT_ENTRY_SIZE_LARGE, PLT_MAX_INSN_COUNT,
OR1K_ADD, OR1K_ORI): New macros to help with plt creation.
(elf_or1k_link_hash_table): New field plt_count.
(elf_or1k_link_hash_entry): New field plt_index.
(elf_or1k_plt_entry_size): New function.
(or1k_write_plt_entry): Update to support variable size PLTs.
(or1k_elf_finish_dynamic_sections): Use new or1k_write_plt_entry
API.
(or1k_elf_finish_dynamic_symbol): Update to write large PLTs
when needed.
(allocate_dynrelocs): Use elf_or1k_plt_entry_size to account for
PLT size.
ld/ChangeLog:
PR 27746
testsuite/ld-or1k/or1k.exp (or1kplttests): Add tests for linking
along with gotha() relocations.
testsuite/ld-or1k/gotha1.dd: New file.
testsuite/ld-or1k/gotha1.s: New file.
testsuite/ld-or1k/gotha2.dd: New file.
testsuite/ld-or1k/gotha2.s: New file
testsuite/ld-or1k/pltlib.s (x): Define size to avoid link
failure.
|
|
The tests currently in binutils are aimed at the original GCC-based
implementation of CTF, which emitted CTF directly from GCC's internal
representation. The approach now under review emits CTF from DWARF,
with an eye to eventually doing this for all non-DWARF debuginfo-like
formats GCC supports. It also uses a different flag to enable
CTF emission (-gctf rather than -gt).
Adjust the testsuite accordingly.
Given that the ld testsuite results are dependent on type ordering,
which we do not guarantee at all, it's amazing how little changes. We
see a few type ordering differences, slices change because the old GCC
was buggy (slices were emitted "backwards", from the wrong end of the
machine word) and its expected results were wrong, and GCC now emits the
underlying integral type for enumerated types, though CTF has no way to
record this yet (coming in v4).
GCC also now emits even hidden symbols into the symtab (and thus
symtypetab), so one symtypetab test changes its expected results
slightly to compensate.
Also add tests for the CTF_K_UNKNOWN nonrepresentable type: this
couldn't be done before now since the only GCC that emits CTF_K_UNKNOWN
for nonrepresentable types is the new one.
ld/ChangeLog
2021-05-06 Nick Alcock <nick.alcock@oracle.com>
* testsuite/ld-ctf/ctf.exp: Use -gctf, not -gt.
* testsuite/lib/ld-lib.exp: Likewise.
* testsuite/ld-ctf/nonrepresentable-1.c: New test for nonrepresentable types.
* testsuite/ld-ctf/nonrepresentable-2.c: Likewise.
* testsuite/ld-ctf/nonrepresentable.d: Likewise.
* testsuite/ld-ctf/array.d: Larger type section.
* testsuite/ld-ctf/data-func-conflicted.d: Likewise.
* testsuite/ld-ctf/enums.d: Likewise.
* testsuite/ld-ctf/conflicting-enums.d: Don't compare types.
* testsuite/ld-ctf/cross-tu-cyclic-conflicting.d: Changed type order.
* testsuite/ld-ctf/cross-tu-noncyclic.d: Likewise.
* testsuite/ld-ctf/slice.d: Adjust for improved slice emission.
libctf/ChangeLog
2021-05-06 Nick Alcock <nick.alcock@oracle.com>
* testsuite/lib/ctf-lib.exp: Use -gctf, not -gt.
* testsuite/libctf-regression/nonstatic-var-section-ld-r.lk:
Hidden symbols now get into the symtypetab anyway.
|
|
Always append ".COUNT" to local symbols to avoid potential conflicts
with existing local symbol "XXX.COUNT".
bfd/
PR ld/27825
* elflink.c (elf_link_output_symstrtab): Always append ".COUNT"
to local symbols.
ld/
PR ld/27825
* testsuite/ld-elf/pr27825-1.d: New file.
* testsuite/ld-elf/pr27825-1a.s: Likewise.
* testsuite/ld-elf/pr27825-1b.s: Likewise.
* testsuite/ld-elf/pr27825-2.d: Likewise.
* testsuite/ld-elf/pr27825-2a.s: Likewise.
* testsuite/ld-elf/pr27825-2b.s: Likewise.
|
|
Test for commit 4916030821bb and b293661219c3.
* testsuite/ld-powerpc/empty.s: New file.
* testsuite/ld-powerpc/undefweak.d,
* testsuite/ld-powerpc/undefweak.s: New testcase.
* testsuite/ld-powerpc/powerpc.exp: Run it.
|
|
commit 23356397449 changed this file but missed one place.
* testsuite/ld-s390/tlspic_64.rd: Adjust expected output for
named section symbols.
|
|
symbols.
bfd * elf.c (_bfd_elf_maybe_function_sym): Do not accept annobin
symbols as potential function symbols.
* elfnn-aarch64.c (elfNN_aarch64_maybe_function_sym): Likewise.
* elf64-ppc.c (ppc64_elf_maybe_function_sym): Likewise.
* elf32-arm.c (elf32_arm_maybe_function_sym): Likewise.
ld * testsuite/ld-elf/anno-sym.s: New test source file.
* testsuite/ld-elf/anno-sym.d: New test driver.
* testsuite/ld-elf/anno-sym.l: New test error output.
|
|
The only insn requiring a truly 16-bit PC-relative relocation outside of
16-bit mode is XBEGIN (with an operand size override). For it, the
relocation generated should behave similar to 8- and (for 64-bit) 32-bit
PC-relatives ones, i.e. be checked for a signed value to fit the field.
This same mode is also correct for 16-bit code. Outside of 16-bit code,
branches with operand size overrides act in a truly PC-relative way only
when living in the low 32k of address space, as they truncate rIP to 16
bits. This can't be expressed by a PC-relative relocation.
Putting in place a new testcase, I'd like to note that the two existing
ones (pcrel16 and pcrel16abs) appear to be pretty pointless: They don't
expect any error despite supposedly checking for overflow, and in fact
there can't possibly be any error for the
- former since gas doesn't emit any relocation in the first place there,
- latter because the way the relocation gets expressed by gas doesn't
allow the linker to notice the overflow; it should be detected by gas
if at all, but see above (an error would be reported here for x86-64
afaict, but this test doesn't get re-used there).
|
|
Don't create a symbolic link to tmpdir/ldscripts if it exists.
PR ld/27771
* testsuite/ld-bootstrap/bootstrap.exp: Create a symbolic link
to tmpdir/ldscripts only if it doesn't exist.
|
|
While the testcase put in place by 74edb473c9ec ("PE/Windows x86_64: Fix
weak undef symbols after image base change") is fine for MingW, it fails
for Cygwin. This is because the default image base is different there
(for whatever reason).
|
|
their section name.
binutils* readelf.c (print_dynamic_symbol): Print the section name for
section symbols without a name of their own.
* testsuite/binutils-all/mips/global-local-symtab-sort-n64t.d:
Adjust expected output to allow for named section symbols.
* testsuite/binutils-all/mips/global-local-symtab-sort-o32t.d:
Likewise.
* testsuite/binutils-all/readelf.s-64: Likewise.
* testsuite/binutils-all/readelf.ss-64-unused: Likewise.
* testsuite/binutils-all/readelf.ss-tmips: Likewise.
* testsuite/binutils-all/readelf.ss-unused: Likewise.
ld * testsuite/ld-aarch64/variant_pcs-now.d: Adjust expected output
to allow for named section symbols.
* testsuite/ld-aarch64/variant_pcs-r.d: Likewise.
* testsuite/ld-aarch64/variant_pcs-shared.d: Likewise.
* testsuite/ld-alpha/tlsbin.rd: Likewise.
* testsuite/ld-alpha/tlsbinr.rd: Likewise.
* testsuite/ld-alpha/tlspic.rd: Likewise.
* testsuite/ld-arm/rodata-merge-map.sym: Likewise.
* testsuite/ld-arm/script-type.sym: Likewise.
* testsuite/ld-cris/libdso-2.d: Likewise.
* testsuite/ld-cris/pr16044.d: Likewise.
* testsuite/ld-elf/sec64k.exp: Likewise.
* testsuite/ld-ia64/tlsbin.rd: Likewise.
* testsuite/ld-ia64/tlspic.rd: Likewise.
* testsuite/ld-mips-elf/global-local-symtab-sort-n64t.d: Likewise.
* testsuite/ld-mips-elf/global-local-symtab-sort-o32t.d: Likewise.
* testsuite/ld-mmix/bspec1.d: Likewise.
* testsuite/ld-mmix/bspec2.d: Likewise.
* testsuite/ld-mmix/local1.d: Likewise.
* testsuite/ld-mmix/local3.d: Likewise.
* testsuite/ld-mmix/local5.d: Likewise.
* testsuite/ld-mmix/local7.d: Likewise.
* testsuite/ld-mmix/undef-3.d: Likewise.
* testsuite/ld-powerpc/tlsso.r: Likewise.
* testsuite/ld-powerpc/tlsso32.r: Likewise.
* testsuite/ld-powerpc/tlstocso.r: Likewise.
* testsuite/ld-s390/tlsbin.rd: Likewise.
* testsuite/ld-s390/tlsbin_64.rd: Likewise.
* testsuite/ld-s390/tlspic.rd: Likewise.
* testsuite/ld-s390/tlspic_64.rd: Likewise.
* testsuite/ld-sparc/gotop32.rd: Likewise.
* testsuite/ld-sparc/gotop64.rd: Likewise.
* testsuite/ld-sparc/tlssunbin32.rd: Likewise.
* testsuite/ld-sparc/tlssunbin64.rd: Likewise.
* testsuite/ld-sparc/tlssunnopic32.rd: Likewise.
* testsuite/ld-sparc/tlssunnopic64.rd: Likewise.
* testsuite/ld-sparc/tlssunpic32.rd: Likewise.
* testsuite/ld-sparc/tlssunpic64.rd: Likewise.
* testsuite/ld-tic6x/common.d: Likewise.
* testsuite/ld-tic6x/shlib-1.rd: Likewise.
* testsuite/ld-tic6x/shlib-1b.rd: Likewise.
* testsuite/ld-tic6x/shlib-1r.rd: Likewise.
* testsuite/ld-tic6x/shlib-1rb.rd: Likewise.
* testsuite/ld-tic6x/shlib-app-1.rd: Likewise.
* testsuite/ld-tic6x/shlib-app-1b.rd: Likewise.
* testsuite/ld-tic6x/shlib-app-1r.rd: Likewise.
* testsuite/ld-tic6x/shlib-app-1rb.rd: Likewise.
* testsuite/ld-tic6x/shlib-noindex.rd: Likewise.
* testsuite/ld-tic6x/static-app-1.rd: Likewise.
* testsuite/ld-tic6x/static-app-1b.rd: Likewise.
* testsuite/ld-tic6x/static-app-1r.rd: Likewise.
* testsuite/ld-tic6x/static-app-1rb.rd: Likewise.
gas * testsuite/gas/aarch64/dwarf.d: Adjust expected output to allow
for named section symbols.
* testsuite/gas/arm/thumbver.d: Likewise.
* testsuite/gas/bfin/loop_temps.d: Likewise.
* testsuite/gas/elf/section2.e-arc: Likewise.
* testsuite/gas/elf/section2.e-arm: Likewise.
* testsuite/gas/elf/section2.e-csky: Likewise.
* testsuite/gas/elf/section2.e-m32r: Likewise.
* testsuite/gas/elf/section2.e-mips: Likewise.
* testsuite/gas/elf/section2.e-msp430: Likewise.
* testsuite/gas/elf/section2.e-riscv: Likewise.
* testsuite/gas/elf/section2.e-rl78: Likewise.
* testsuite/gas/elf/section2.e-rx: Likewise.
* testsuite/gas/elf/section2.e-score: Likewise.
* testsuite/gas/elf/section2.e-tic6x: Likewise.
* testsuite/gas/elf/section2.e-unused: Likewise.
* testsuite/gas/elf/section2.e-v850: Likewise.
* testsuite/gas/elf/section2.e-xtensa: Likewise.
* testsuite/gas/ia64/alias-ilp32.d: Likewise.
* testsuite/gas/ia64/alias.d: Likewise.
* testsuite/gas/ia64/global.d: Likewise.
* testsuite/gas/microblaze/relax_size.elf: Likewise.
* testsuite/gas/microblaze/relax_size2.elf: Likewise.
* testsuite/gas/mips/global-local-symtab-sort-n64t.d: Likewise.
* testsuite/gas/mips/global-local-symtab-sort-o32t.d: Likewise.
* testsuite/gas/mmix/bspec-1.d: Likewise.
* testsuite/gas/mmix/byte-1.d: Likewise.
* testsuite/gas/mmix/comment-1.d: Likewise.
* testsuite/gas/mmix/loc-1.d: Likewise.
* testsuite/gas/mmix/loc-2.d: Likewise.
* testsuite/gas/mmix/loc-3.d: Likewise.
* testsuite/gas/mmix/loc-4.d: Likewise.
* testsuite/gas/mmix/loc-5.d: Likewise.
* testsuite/gas/tic6x/scomm-directive-4.d: Likewise.
|
|
order to manage C++ exceptions built with GCC.
bfd PR binutils/21700
* reloc.c (BFD_RELOC_PPC_NEG): New relocation.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* coff-rs6000.c (_bfd_xcoff_reloc_type_lookup): Add
BFD_RELOC_PPC_NEG handler.
(xcoff_reloc_type_neg): Correctly substract addend.
* coff64-rs6000.c (xcoff64_howto_table): Add R_NEG_32
howto.
(xcoff64_rtype2howto): Add handler for R_NEG_32.
(xcoff64_reloc_type_lookup): Add BFD_RELOC_PPC_NEG handler.
* xcofflink.c (xcoff_need_ldrel_p): Check output section
for R_POS-like relocations. New argument added.
(xcoff_mark): Adapt to new xcoff_need_ldrel_p argument.
(xcoff_link_input_bfd): Likewise.
gas * config/tc-ppc.c (ppc_get_csect_to_adjust): New function.
(ppc_fix_adjustable): Manage fx_subsy part.
(tc_gen_reloc): Create second relocation when both
fx_addsy and fx_subsy are provided.
* config/tc-ppc.h (RELOC_EXPANSION_POSSIBLE): New define.
(MAX_RELOC_EXPANSION): Likewise.
(TC_FORCE_RELOCATION_SUB_SAME): Likewise
(UNDEFINED_DIFFERENCE_OK): Likewise
* testsuite/gas/all/gas.exp: Skip difference between two
undefined symbols test.
ld * testsuite/ld-powerpc/aix52.exp: Add new test.
* testsuite/ld-powerpc/aix-neg-reloc-32.d: New test.
* testsuite/ld-powerpc/aix-neg-reloc-64.d: New test.
* testsuite/ld-powerpc/aix-neg-reloc.ex: New test.
* testsuite/ld-powerpc/aix-neg-reloc.s: New test.
|
|
* ld.texi (Options): Add note about the effect of --as-needed on
the --rpath and --rpath-link options on Linux based systems.
|
|
PR 27722
* libdep_plugin.c (str2vec): Don't pass a potentially signed char
to isspace.
|
|
gas already has this. Here it enables checking hash table type passed
to elf_link_hash_lookup and elf_link_hash_traverse.
bfd/
* elf-bfd.h (ENABLE_CHECKING): Define.
(elf_link_hash_lookup): Abort if wrong type of hash table.
(elf_link_hash_traverse): Likewise.
* configure.ac (--enable-checking): Add support.
* config.in: Regenerate.
* configure: Regenerate.
binutils/
* configure.ac (--enable-checking): Add support.
* config.in: Regenerate.
* configure: Regenerate.
ld/
* configure.ac (--enable-checking): Add support.
* config.in: Regenerate.
* configure: Regenerate.
opcodes/
* configure.ac (--enable-checking): Add support.
* config.in: Regenerate.
* configure: Regenerate.
|
|
Involves a bit of editing as we now need to be more precise in pointer
types.
bfd/
* elf-bfd.h (is_elf_hash_table): Convert macro to inline function.
(elf_link_hash_lookup, elf_link_hash_traverse): Likewise.
(elf_hash_table, elf_hash_table_id): Likewise.
* elf32-arm.c (elf32_arm_setup_section_lists): Delete redundant
is_elf_hash_table check.
* elf32-csky.c (elf32_csky_setup_section_lists): Likewise.
* elf32-hppa.c (clobber_millicode_symbols): Correct param types.
* elf64-alpha.c (elf64_alpha_output_extsym): Likewise.
* elfnn-ia64.c (elfNN_ia64_global_dyn_info_free: Likewise.
(elfNN_ia64_global_dyn_sym_thunk: Likewise.
* elf64-ia64-vms.c (elf64_ia64_global_dyn_info_free): Likewise.
(elf64_ia64_global_dyn_sym_thunk): Likewise.
(elf64_vms_link_add_object_symbols): Pass base type of hash table
to is_elf_hash_table.
* elflink.c (_bfd_elf_dynamic_symbol_p): Likewise.
(_bfd_elf_symbol_refs_local_p, _bfd_elf_add_dynamic_entry): Likewise.
(_bfd_elf_strip_zero_sized_dynamic_sections): Likewise.
(_bfd_elf_link_check_relocs, elf_link_add_object_symbols): Likewise.
(bfd_elf_final_link): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_setup_section_lists): Likewise.
* elf64-ppc.c (ppc64_elf_set_toc): Likewise. Use bfd_link_hash_lookup.
ld/
* emultempl/mipself.em (mips_create_output_section_statements):
Pass base type of hash table to is_elf_hash_table.
* ldelf.c (ldelf_after_open): Likewise.
|
|
It's not enough to test that the output is ELF before casting
bfd_link_hash_entry to elf_link_hash_entry. Some ELF targets (d30v,
dlx, pj, s12z, xgate) use the generic linker support in bfd/linker.c
and thus their symbols are of type generic_link_hash_entry.
Not all of the places this patch touches can result in wrong accesses,
but I thought it worth ensuring that all occurrences of
elf_link_hash_entry in ld/ were obviously correct.
PR 27719
* ldlang.c (lang_mark_undefineds, undef_start_stop): Test that
the symbol hash table is the correct type before accessing
elf_link_hash_entry symbols.
* plugin.c (is_visible_from_outside): Likewise.
* emultempl/armelf.em (ld${EMULATION_NAME}_finish): Likewise.
* emultempl/solaris2.em (elf_solaris2_before_allocation): Likewise.
|
|
This adds some annotation to Power10 pcrel instructions, displaying
the target address (ie. pc + D34 field) plus a symbol if there is one
at exactly that target address. pld from the .got or .plt will also
look up the entry and display it, symbolically if there is a dynamic
relocation on the entry.
include/
* dis-asm.h (struct disassemble_info): Add dynrelbuf and dynrelcount.
binutils/
* objdump.c (struct objdump_disasm_info): Delete dynrelbuf and
dynrelcount.
(find_symbol_for_address): Adjust for dynrelbuf and dynrelcount move.
(disassemble_section, disassemble_data): Likewise.
opcodes/
* ppc-dis.c (struct dis_private): Add "special".
(POWERPC_DIALECT): Delete. Replace uses with..
(private_data): ..this. New inline function.
(disassemble_init_powerpc): Init "special" names.
(skip_optional_operands): Add is_pcrel arg, set when detecting R
field of prefix instructions.
(bsearch_reloc, print_got_plt): New functions.
(print_insn_powerpc): For pcrel instructions, print target address
and symbol if known, and decode plt and got loads too.
gas/
* testsuite/gas/ppc/prefix-pcrel.d: Update expected output.
* testsuite/gas/ppc/prefix-reloc.d: Likewise.
* gas/testsuite/gas/ppc/vsx_32byte.d: Likewise.
ld/
* testsuite/ld-powerpc/inlinepcrel-1.d: Update expected output.
* testsuite/ld-powerpc/inlinepcrel-2.d: Likewise.
* testsuite/ld-powerpc/notoc2.d: Likewise.
* testsuite/ld-powerpc/notoc3.d: Likewise.
* testsuite/ld-powerpc/pcrelopt.d: Likewise.
* testsuite/ld-powerpc/startstop.d: Likewise.
* testsuite/ld-powerpc/tlsget.d: Likewise.
* testsuite/ld-powerpc/tlsget2.d: Likewise.
* testsuite/ld-powerpc/tlsld.d: Likewise.
* testsuite/ld-powerpc/weak1.d: Likewise.
* testsuite/ld-powerpc/weak1so.d: Likewise.
|
|
Due to a bogus linker script, or perhaps because a section doesn't get
placed by a linker script while default placement puts it too high up,
sections can end up above .reloc. Since the process of determining its
contents (and hence its size) happens before final section placement,
relocations needed for such sections would no longer point at the
correct address in the final binary. Warn about this (down the road this
may want to become an error, unless size determination and content
creation for .reloc would get decoupled).
To avoid triggering the warning when .reloc gets discarded, suppress
populating the section in the first place in this case.
|
|
* configure.ac: Move initfini-array arg handling earlier. Don't
check for string.h, strings.h, stdlib.h, or locale.h. Do check
for inttypes.h, stdint.h, sys/types.h. Don't check for
setlocale, free, getev or strstr.
(AC_ISC_POSIX): Don't invoke.
* sysdep.h: Include string.h and stdlib.h unconditionally. Test
HAVE_SYS_TYPE_H and HAVE_SYS_STAT_H. Remove strstr, free and
getenv fallback declarations.
* ld.h: Don't test HAVE_LOCALE_H.
* ldmain.c: Don't test HAVE_SETLOCALE.
* config.in: Regenerate.
* configure: Regenerate.
|
|
The change in PR19011 changed the image load address from being in the lower
32-bit address space to the higher 64-bit address space.
However when you have a weak undef symbol which stays undef at the end of
linking the linker has to resolve this (Windows loader does not support undef
symbols). As such typically these would resolve to 0.
The relocation used for these weak symbols are the normal 32-bit PC_REL call
relocs. So when doing the overflow check LD checks if the distance between the
symbol and the call is within range. However now that the load address is
> 32-bits and the symbol val is 0 this overflow check will always fail.
As such the linker gives a bogus error. This patch makes the linker not emit
the overflow failure but chooses to still let the check be performed (as it's
mid-end code).
One down side of this is that it does break the common convention that the call
be to sym at 0x0. i.e. before you'd get
401015: 74 05 je 40101c
401017: e8 e4 ef bf ff callq 0
and now you get
140001015: 74 05 je 14000101c
140001017: e8 e4 ef ff bf call 100000000
since the call is PC_REL there's no way to get the range large enough to
resolve to 0. As such I have chosen to leave it as the furthest simple range
that we can still represent.
By only ignoring the error we leave the symbol value itself to still be 0
such that the if(<symbol>) checks still work correctly.
bfd/ChangeLog:
2021-04-01 Tamar Christina <tamar.christina@arm.com>
PR ld/26659
* cofflink.c (_bfd_coff_generic_relocate_section): Ignore overflow.
ld/ChangeLog:
2021-04-01 Tamar Christina <tamar.christina@arm.com>
PR ld/26659
* testsuite/ld-pe/pe.exp: Add test.
* testsuite/ld-pe/pr26659-weak-undef-sym.d: New test.
* testsuite/ld-pe/pr26659-weak-undef-sym.s: New test.
|
|
bfd/ChangeLog:
* ecoff.c (strneq): Remove strneq and use startswith.
(_bfd_ecoff_slurp_armap): Likewise.
binutils/ChangeLog:
* elfcomm.h (strneq): Remove strneq and use startswith.
* readelf.c (ia64_process_unwind): Likewise.
(process_note): Likewise.
gas/ChangeLog:
* config/obj-coff.c (strneq): Remove strneq and use startswith.
(weak_is_altname): Likewise.
(obj_coff_section): Likewise.
* config/tc-cr16.c (process_label_constant): Likewise.
* config/tc-crx.c (strneq): Likewise.
include/ChangeLog:
* opcode/cr16.h (strneq): Remove strneq and use startswith.
ld/ChangeLog:
* ldbuildid.c (strneq): Remove strneq and use startswith.
(validate_build_id_style): Likewise.
(compute_build_id_size): Likewise.
opcodes/ChangeLog:
* arm-dis.c (strneq): Remove strneq and use startswith.
* cr16-dis.c (print_insn_cr16): Likewise.
* score-dis.c (streq): Likewise.
(strneq): Likewise.
* score7-dis.c (strneq): Likewise.
|
|
* sysdep.h (POISON_BFD_BOOLEAN): Define.
* configure.ac (elf_list_options, elf_shlib_list_options=false),
(elf_plt_unwind_list_options=false): Replace FALSE with false,
and TRUE with true.
* emulparams/call_nop.sh, * emulparams/cet.sh,
* emulparams/dynamic_undefined_weak.sh,
* emulparams/elf32b4300.sh, * emulparams/elf32lm32.sh,
* emulparams/elf32lr5900.sh, * emulparams/elf32lr5900n32.sh,
* emulparams/elf32visium.sh, * emulparams/elf_x86_64.sh,
* emulparams/extern_protected_data.sh, * emulparams/plt_unwind.sh,
* emulparams/reloc_overflow.sh, * emulparams/static.sh,
* emulparams/x86-64-lam.sh, * emultempl/aarch64elf.em,
* emultempl/aix.em, * emultempl/alphaelf.em,
* emultempl/armcoff.em, * emultempl/armelf.em,
* emultempl/avrelf.em, * emultempl/beos.em, * emultempl/bfin.em,
* emultempl/cr16elf.em, * emultempl/crxelf.em,
* emultempl/cskyelf.em, * emultempl/elf.em, * emultempl/genelf.em,
* emultempl/hppaelf.em, * emultempl/linux.em,
* emultempl/m68hc1xelf.em, * emultempl/metagelf.em,
* emultempl/mipself.em, * emultempl/mmix-elfnmmo.em,
* emultempl/mmixelf.em, * emultempl/mmo.em, * emultempl/msp430.em,
* emultempl/nios2elf.em, * emultempl/pdp11.em, * emultempl/pe.em,
* emultempl/pep.em, * emultempl/ppc32elf.em,
* emultempl/ppc64elf.em, * emultempl/rxelf.em,
* emultempl/rxlinux.em, * emultempl/scoreelf.em,
* emultempl/solaris2.em, * emultempl/spuelf.em,
* emultempl/ticoff.em, * emultempl/v850elf.em, * emultempl/vms.em,
* emultempl/xtensaelf.em, * emultempl/z80.em, * ld.h,
* ldbuildid.c, * ldbuildid.h, * ldcref.c, * ldctor.c, * ldctor.h,
* ldelf.c, * ldelf.h, * ldelfgen.c, * ldelfgen.h, * ldemul.c,
* ldemul.h, * ldexp.c, * ldexp.h, * ldfile.c, * ldfile.h,
* ldgram.y, * ldlang.c, * ldlang.h, * ldmain.c, * ldmain.h,
* ldmisc.c, * ldmisc.h, * ldwrite.c, * lexsup.c, * mri.c,
* pe-dll.c, * pe-dll.h, * pep-dll.h, * plugin.c, * plugin.h,
* testplug.c, * testplug2.c, * testplug3.c, * testplug4.c: Replace
bfd_boolean with bool, FALSE with false, and TRUE with true.
* configure: Regenerate.
|
|
If we require C99 for binutils then stdint.h is available.
bfd/
* .gitignore: Delete bfd_stdint.h entry.
* Makefile.am (bfdinclude_HEADERS): Delete bfd_stdint.h.
(BUILD_HFILES, LOCAL_H_DEPS): Likewise.
* bfd-in.h: Include stdint.h in place of bfd_stdint.h.
* configure.ac: Don't invoke GCC_HEADER_STDINT.
* configure.com: Don't create bfd_stdint.h.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* bfd-in2.h: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
* doc/Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
binutils/
* coffdump.c: Include stdint.h in place of bfd_stdint.h.
* dwarf.c: Likewise.
gas/
* config/tc-aarch64.c: Include stdint.h in place of bfd_stdint.h.
* config/tc-crx.c: Likewise.
* config/tc-nds32.h: Likewise.
include/
* cgen/basic-modes.h: Include stdint.h in place of bfd_stdint.h.
* elf/nfp.h: Likewise.
* opcode/aarch64.h: Likewise.
* opcode/cgen.h: Likewise.
* opcode/nfp.h: Likewise.
* opcode/ppc.h: Likewise.
ld/
* elf-hints-local.h: Include stdint.h in place of bfd_stdint.h.
* emultempl/nds32elf.em: Likewise.
* testsuite/ld-elf/mbind2b.c: Likewise.
* testsuite/ld-elf/pr18718.c: Likewise.
* testsuite/ld-elf/pr18720a.c: Likewise.
* testsuite/ld-elf/pr25749-1.c: Likewise.
* testsuite/ld-elf/pr25749-1a.c: Likewise.
* testsuite/ld-elf/pr25749-1b.c: Likewise.
* testsuite/ld-elf/pr25749-1c.c: Likewise.
* testsuite/ld-elf/pr25749-1d.c: Likewise.
* testsuite/ld-elf/pr25749-2.c: Likewise.
* testsuite/ld-elf/pr25754-1a.c: Likewise.
* testsuite/ld-elf/pr25754-2a.c: Likewise.
* testsuite/ld-elf/pr25754-3a.c: Likewise.
* testsuite/ld-elf/pr25754-4a.c: Likewise.
* testsuite/ld-elf/pr25754-5a.c: Likewise.
* testsuite/ld-elf/pr25754-6a.c: Likewise.
opcodes/
* aarch64-dis.c: Include stdint.h in place of bfd_stdint.h.
* aarch64-dis.h: Likewise.
* aarch64-opc.c: Likewise.
* avr-dis.c: Likewise.
* csky-dis.c: Likewise.
* nds32-asm.c: Likewise.
* nds32-dis.c: Likewise.
* nfp-dis.c: Likewise.
* riscv-dis.c: Likewise.
* s12z-dis.c: Likewise.
* wasm32-dis.c: Likewise.
|
|
There is really no need to write code like "foo != 0 ? TRUE : FALSE"
unless we had stupidly defined FALSE as something other than 0 or TRUE
as something other than 1. The simpler "foo != 0" does just as well.
Similarly "(condition == TRUE)" or "(condition == FALSE) can be
simplified to "(condition)" and "(!condition)" respectively.
I'll note that there is reason to use "integer_expression != 0" when
assigning a bfd_boolean rather than the simpler "integer_expression",
if you expect the variable to have 0 or 1 value. It's probably even a
good idea to not rely on implicit conversion if bfd_boolean were _Bool.
bfd/
* aoutx.h (aout_link_write_symbols): Don't cast boolean expression
to bfd_boolean.
* elf32-or1k.c (or1k_set_got_and_rela_sizes): Dont compare booleans
against FALSE.
* elf32-arc.c (name_for_global_symbol): Don't compare boolean to TRUE.
(is_reloc_PC_relative): Don't use "boolean_condition ? TRUE : FALSE".
(is_reloc_SDA_relative, is_reloc_for_GOT): Likewise.
(is_reloc_for_PLT, is_reloc_for_TLS): Likewise.
* elf32-arm.c (stm32l4xx_need_create_replacing_stub): Likewise.
* elf32-nds32.c (insert_nds32_elf_blank): Likewise.
* elf32-rx.c (rx_set_section_contents): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Likewise.
* elfxx-mips.c (_bfd_mips_elf_ignore_undef_symbol): Likewise.
* mach-o.c (bfd_mach_o_read_command): Likewise.
* targets.c (bfd_get_target_info): Likewise.
binutils/
* dlltool.c (main): Don't use "boolean_condition ? TRUE : FALSE".
* dwarf.c (read_and_display_attr_value): Likewise.
(display_debug_str_offsets): Likewise.
* objdump.c (dump_bfd): Likewise.
* readelf.c (dump_section_as_strings): Likewise.
(dump_section_as_bytes): Likewise.
gas/
* atof-generic.c (FALSE, TRUE): Don't define.
* config/obj-elf.h (FALSE, TRUE): Don't define.
* config/obj-som.h (FALSE, TRUE): Don't define.
* config/tc-hppa.h (FALSE, TRUE): Don't define.
* config/tc-pdp11.c (FALSE, TRUE): Don't define.
* config/tc-iq2000.h (obj_fix_adjustable): Delete.
* config/tc-m32r.h (TC_FIX_ADJUSTABLE): Delete.
* config/tc-mt.h (obj_fix_adjustable): Delete.
* config/tc-nds32.h (TC_FIX_ADJUSTABLE): Delete.
* config/tc-arc.c (parse_opcode_flags): Simplify boolean expression.
(relaxable_flag, relaxable_operand, assemble_insn): Likewise.
(tokenize_extregister): Likewise.
* config/tc-csky.c (parse_opcode, get_operand_value): Likewise.
(parse_operands_op, parse_operands, md_assemble): Likewise.
* config/tc-d10v.c (build_insn): Likewise.
* config/tc-score.c (s3_gen_insn_frag): Likewise.
* config/tc-score7.c (s7_gen_insn_frag, s7_relax_frag): Likewise.
* config/tc-tic6x.c (tic6x_update_features, md_assemble): Likewise.
* config/tc-z80.c (emit_byte): Likewise.
include/
* opcode/aarch64.h (alias_opcode_p): Simplify boolean expression.
(opcode_has_alias, pseudo_opcode_p, optional_operand_p): Likewise.
(opcode_has_special_coder): Likewise.
ld/
* emultempl/aix.em (gld${EMULATION_NAME}_before_allocation): Simplify
boolean expression.
* lexsup.c (parse_args): Likewise.
* pe-dll.c (pe_dll_id_target): Likewise.
opcodes/
* aarch64-opc.c (vector_qualifier_p): Simplify boolean expression.
(fp_qualifier_p, get_data_pattern): Likewise.
(aarch64_get_operand_modifier_from_value): Likewise.
(aarch64_extend_operator_p, aarch64_shift_operator_p): Likewise.
(operand_variant_qualifier_p): Likewise.
(qualifier_value_in_range_constraint_p): Likewise.
(aarch64_get_qualifier_esize): Likewise.
(aarch64_get_qualifier_nelem): Likewise.
(aarch64_get_qualifier_standard_value): Likewise.
(get_lower_bound, get_upper_bound): Likewise.
(aarch64_find_best_match, match_operands_qualifier): Likewise.
(aarch64_print_operand): Likewise.
* aarch64-opc.h (operand_has_inserter, operand_has_extractor): Likewise.
(operand_need_sign_extension, operand_need_shift_by_two): Likewise.
(operand_need_shift_by_four, operand_maybe_stack_pointer): Likewise.
* arm-dis.c (print_insn_mve, print_insn_thumb32): Likewise.
* tic6x-dis.c (tic6x_check_fetch_packet_header): Likewise.
(print_insn_tic6x): Likewise.
|
|
The data object and function info sections (collectively "symtypetabs")
usually (i.e. if non-indexed) have sizes defined by the size of the ELF
dynamic symbol table in the object they are linked to. This means test
results should not depend on the exact sizes of these sections, because
adding entirely irrelevant symbols to the dynsym can cause spurious test
failures. (This also means we should not match the offset of sections
that follow them, since those too depend on the exact size of the
symtypetab sections.)
Spotted by turning the sanitizer on, which introduced new dynsym entries
and expanded the symtypetab sizes to match.
ld/ChangeLog
2021-03-25 Nick Alcock <nick.alcock@oracle.com>
* testsuite/ld-ctf/array.d: Only check that the data object
section is nonempty: do not check its exact size.
* testsuite/ld-ctf/diag-parlabel.d: Likewise.
* testsuite/ld-ctf/slice.d: Likewise.
* testsuite/ld-ctf/data-func-conflicted.d: Likewise, and for the
func info section too.
* testsuite/ld-ctf/function.d: Likewise, for the func info section.
|
|
bfd/ChangeLog:
* bfd-in.h (startswith): Add startswith function.
(CONST_STRNEQ): Remove.
* bfd-in2.h (startswith): Regenerate with make headers.
* archive.c (bfd_slurp_armap): Replace usage of CONST_STRNEQ with startswith.
(_bfd_slurp_extended_name_table): Likewise.
* archive64.c (_bfd_archive_64_bit_slurp_armap): Likewise.
* bfd.c (bfd_get_sign_extend_vma): Likewise.
(bfd_convert_section_size): Likewise.
(bfd_convert_section_contents): Likewise.
* coff-stgo32.c (go32exe_create_stub): Likewise.
(go32exe_check_format): Likewise.
* coffcode.h (styp_to_sec_flags): Likewise.
(GNU_DEBUGALTLINK): Likewise.
* coffgen.c (_bfd_coff_section_already_linked): Likewise.
(coff_gc_sweep): Likewise.
(bfd_coff_gc_sections): Likewise.
* cofflink.c (coff_link_add_symbols): Likewise.
(process_embedded_commands): Likewise.
* compress.c (bfd_is_section_compressed_with_header): Likewise.
(bfd_init_section_decompress_status): Likewise.
* dwarf2.c (find_debug_info): Likewise.
(place_sections): Likewise.
* ecoff.c (_bfd_ecoff_slurp_armap): Likewise.
* elf-m10300.c (_bfd_mn10300_elf_size_dynamic_sections): Likewise.
* elf.c (_bfd_elf_make_section_from_shdr): Likewise.
(assign_section_numbers): Likewise.
(elfcore_grok_win32pstatus): Likewise.
* elf32-arm.c (cmse_scan): Likewise.
(elf32_arm_gc_mark_extra_sections): Likewise.
(elf32_arm_size_dynamic_sections): Likewise.
(is_arm_elf_unwind_section_name): Likewise.
* elf32-bfin.c (bfin_size_dynamic_sections): Likewise.
* elf32-cr16.c (_bfd_cr16_elf_size_dynamic_sections): Likewise.
* elf32-cris.c (elf_cris_size_dynamic_sections): Likewise.
* elf32-csky.c (csky_elf_size_dynamic_sections): Likewise.
* elf32-hppa.c (elf32_hppa_size_dynamic_sections): Likewise.
* elf32-iq2000.c (iq2000_elf_check_relocs): Likewise.
* elf32-lm32.c (lm32_elf_size_dynamic_sections): Likewise.
* elf32-m32r.c (m32r_elf_size_dynamic_sections): Likewise.
* elf32-m68k.c (elf_m68k_size_dynamic_sections): Likewise.
* elf32-metag.c (elf_metag_size_dynamic_sections): Likewise.
* elf32-msp430.c (msp430_elf_relax_delete_bytes): Likewise.
* elf32-nios2.c (nios2_elf32_size_dynamic_sections): Likewise.
* elf32-or1k.c (or1k_elf_size_dynamic_sections): Likewise.
* elf32-ppc.c (ppc_elf_size_dynamic_sections): Likewise.
* elf32-s390.c (elf_s390_size_dynamic_sections): Likewise.
* elf32-score.c (s3_bfd_score_elf_size_dynamic_sections): Likewise.
* elf32-score7.c (s7_bfd_score_elf_size_dynamic_sections): Likewise.
* elf32-sh.c (sh_elf_size_dynamic_sections): Likewise.
* elf32-tic6x.c (is_tic6x_elf_unwind_section_name): Likewise.
(elf32_tic6x_size_dynamic_sections): Likewise.
* elf32-vax.c (elf_vax_size_dynamic_sections): Likewise.
* elf32-xtensa.c (elf_xtensa_size_dynamic_sections): Likewise.
(xtensa_is_insntable_section): Likewise.
(xtensa_is_littable_section): Likewise.
(xtensa_is_proptable_section): Likewise.
(xtensa_property_section_name): Likewise.
(xtensa_callback_required_dependence): Likewise.
* elf64-alpha.c (elf64_alpha_size_dynamic_sections): Likewise.
* elf64-hppa.c (elf64_hppa_size_dynamic_sections): Likewise.
* elf64-ia64-vms.c (is_unwind_section_name): Likewise.
(get_reloc_section): Likewise.
(elf64_ia64_size_dynamic_sections): Likewise.
(elf64_ia64_object_p): Likewise.
* elf64-mmix.c (mmix_elf_add_symbol_hook): Likewise.
* elf64-ppc.c (ppc64_elf_size_dynamic_sections): Likewise.
* elf64-s390.c (elf_s390_size_dynamic_sections): Likewise.
* elflink.c (elf_link_add_object_symbols): Likewise.
(_bfd_elf_gc_mark_extra_sections): Likewise.
(bfd_elf_parse_eh_frame_entries): Likewise.
(_bfd_elf_section_already_linked): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_size_dynamic_sections): Likewise.
* elfnn-ia64.c (is_unwind_section_name): Likewise.
(elfNN_ia64_size_dynamic_sections): Likewise.
(elfNN_ia64_object_p): Likewise.
* elfxx-mips.c (FN_STUB_P): Likewise.
(CALL_STUB_P): Likewise.
(CALL_FP_STUB_P): Likewise.
(_bfd_mips_elf_section_from_shdr): Likewise.
(_bfd_mips_elf_fake_sections): Likewise.
(_bfd_mips_elf_size_dynamic_sections): Likewise.
(_bfd_mips_final_write_processing): Likewise.
(_bfd_mips_elf_final_link): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_size_dynamic_sections): Likewise.
* elfxx-x86.c (elf_i386_is_reloc_section): Likewise.
(elf_x86_64_is_reloc_section): Likewise.
* hpux-core.c (thread_section_p): Likewise.
* libcoff.h (bfd_pei_p): Likewise.
* linker.c (REAL): Likewise.
(unwrap_hash_lookup): Likewise.
(_bfd_generic_link_add_one_symbol): Likewise.
* mmo.c (mmo_internal_write_section): Likewise.
* osf-core.c (osf_core_core_file_p): Likewise.
* pef.c (bfd_pef_print_symbol): Likewise.
* pei-x86_64.c (pex64_print_all_pdata_sections): Likewise.
* som.c (som_slurp_symbol_table): Likewise.
(som_slurp_armap): Likewise.
* wasm-module.c (wasm_compute_custom_section_file_position): Likewise.
binutils/ChangeLog:
* dlltool.c (scan_drectve_symbols): Replace usage of CONST_STRNEQ with startswith.
* emul_aix.c (ar_emul_aix_parse_arg): Likewise.
* objcopy.c (is_mergeable_note_section): Likewise.
* objdump.c (dump_dwarf_section): Likewise.
* prdbg.c (pr_method_type): Likewise.
(pr_class_baseclass): Likewise.
(tg_class_baseclass): Likewise.
* readelf.c (process_lto_symbol_tables): Likewise.
* stabs.c (ULLHIGH): Likewise.
(parse_stab_argtypes): Likewise.
(stab_demangle_function_name): Likewise.
gas/ChangeLog:
* config/tc-i386.c (md_parse_option): Replace usage of CONST_STRNEQ with startswith.
(x86_64_section_word): Likewise.
* config/tc-sparc.c (md_parse_option): Likewise.
gdb/ChangeLog:
* arm-tdep.c (show_disassembly_style_sfunc): Replace usage of CONST_STRNEQ with startswith.
(_initialize_arm_tdep): Likewise.
ld/ChangeLog:
* emultempl/aix.em: Replace usage of CONST_STRNEQ with startswith.
* emultempl/beos.em: Likewise.
* emultempl/elf.em: Likewise.
* emultempl/pe.em: Likewise.
* emultempl/pep.em: Likewise.
* emultempl/xtensaelf.em: Likewise.
* ldctor.c (ctor_prio): Likewise.
* ldelf.c (ldelf_try_needed): Likewise.
(ldelf_parse_ld_so_conf): Likewise.
(ldelf_after_open): Likewise.
(output_rel_find): Likewise.
(ldelf_place_orphan): Likewise.
* ldfile.c (ldfile_add_library_path): Likewise.
* ldlang.c (lang_add_input_file): Likewise.
* ldmain.c (get_sysroot): Likewise.
(get_emulation): Likewise.
(add_archive_element): Likewise.
* ldwrite.c (unsplittable_name): Likewise.
(clone_section): Likewise.
* lexsup.c (parse_args): Likewise.
* pe-dll.c (is_import): Likewise.
(pe_implied_import_dll): Likewise.
opcodes/ChangeLog:
* aarch64-dis.c (parse_aarch64_dis_option): Replace usage of CONST_STRNEQ with startswith.
* arc-dis.c (parse_option): Likewise.
* arm-dis.c (parse_arm_disassembler_options): Likewise.
* cris-dis.c (print_with_operands): Likewise.
* h8300-dis.c (bfd_h8_disassemble): Likewise.
* i386-dis.c (print_insn): Likewise.
* ia64-gen.c (fetch_insn_class): Likewise.
(parse_resource_users): Likewise.
(in_iclass): Likewise.
(lookup_specifier): Likewise.
(insert_opcode_dependencies): Likewise.
* mips-dis.c (parse_mips_ase_option): Likewise.
(parse_mips_dis_option): Likewise.
* s390-dis.c (disassemble_init_s390): Likewise.
* wasm32-dis.c (parse_wasm32_disassembler_options): Likewise.
|
|
PR ld/27590
* testsuite/ld-x86-64/pr27590.rd: New file.
* testsuite/ld-x86-64/pr27590a.obj.bz2: Likewise.
* testsuite/ld-x86-64/pr27590b.obj.bz2: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run ld/27590 test.
|
|
The exception for debug sections in clearing SEC_EXCLUDE when
relocatable was really for one specific debug section, so let's make
it do just that.
bfd/
PR 27590
* elf.c (_bfd_elf_make_section_from_shdr): Remove SHF_EXCLUDE
test for .gnu.debuglto*.
ld/
PR 27590
* ldlang.c (lang_gc_sections): Clear SEC_EXCLUDE when relocatable
for all sections except .stabstr.
|
|
PR 27590
* testsuite/ld-elf/pr27590a.d: Match relocs using label, and
R_MIPS_NONE.
* testsuite/ld-elf/pr27590b.d: Likewise.
|
|
commit 994b25132814f4c2be93ce53a616a74139c4cf3c
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Sun Jan 17 20:01:16 2021 -0800
ld/elf: Ignore section symbols when matching linkonce with comdat
ignored section symbols when comparing symbols in 2 sections. Since all
references to debugging sections are done with section symbols, symbols
in debugging sections are ignored and we fail to match symbols in comdat
debugging sections. Also .gnu.debuglto_.debug_* sections aren't treated
as debugging sections.
1. Treate .gnu.debuglto_.debug_ section as debugging section unless it
is marked with SHF_EXCLUDE.
2. Revert commit 994b2513281 in elf_create_symbuf.
3. Ignore section symbols only when matching non-debugging sections or
linkonce section with comdat section.
bfd/
PR ld/27590
* elf.c (_bfd_elf_make_section_from_shdr): Treate
.gnu.debuglto_.debug_ section as debugging section unless it is
marked with SHF_EXCLUDE.
* elflink.c (elf_create_symbuf): Revert commit 994b2513281.
(bfd_elf_match_symbols_in_sections): Ignore section symbols when
matching non-debugging sections or linkonce section with comdat
section.
ld/
PR ld/27590
* testsuite/ld-elf/pr27590.s: New file.
* testsuite/ld-elf/pr27590a.d: Likewise.
* testsuite/ld-elf/pr27590b.d: Likewise.
* testsuite/ld-i386/i386.exp: Also run ld/27193 test with
--reduce-memory-overheads.
|
|
Check version >= 3, instead of version == 3 || version == 4, for
DW_FORM_ref_addr.
bfd/
PR ld/27587
* dwarf2.c (read_attribute_value): Check version >= 3 for
DW_FORM_ref_addr.
ld/
PR ld/27587
* testsuite/ld-x86-64/pr27587.err: New file.
* testsuite/ld-x86-64/pr27587a.obj.bz2: Likewise.
* testsuite/ld-x86-64/pr27587b.obj.bz2: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run PR ld/27587 test.
|
|
The previous commit started to error-check the lookup of
ctf_type_encoding for the underlying type that is internally done when
carrying out a ctf_type_encoding on a slice.
Unfortunately, enums have no encoding, so this has historically been
returning an error (which is ignored) and then populating the cte_format
with uninitialized data. Now the error is not ignored, this is
returning an error, which breaks linking of CTF containing bitfields of
enumerated type.
CTF format v3 does not record the actual underlying type of a enum, but
we can mock up something that is not *too* wrong, and that is at any
rate better than uninitialized data.
ld/ChangeLog
2021-03-18 Nick Alcock <nick.alcock@oracle.com>
* testsuite/ld-ctf/slice.c: Check slices of enums too.
* testsuite/ld-ctf/slice.d: Results adjusted.
libctf/ChangeLog
2021-03-18 Nick Alcock <nick.alcock@oracle.com>
* ctf-types.c (ctf_type_encoding): Support, after a fashion, for enums.
* ctf-dump.c (ctf_dump_format_type): Do not report enums' degenerate
encoding.
|
|
* pe-dll.c (pe_find_cdecl_alias_match): Use memmove to overwrite
lname string.
|
|
The allocation of reloc_d doesn't take reloc_s->size into account. There
is already padding being emitted up to the allocated size. While
reloc_s->size ought to still be zero at this point anyway (and hence the
code being deleted would have been just dead), don't risk writing past
the actual allocation.
|
|
Attempting to build --enable-targets=all on a 32-bit host results in a
number of errors like the following.
eelf32lriscv.o: in function `gldelf32lriscv_after_allocation':
eelf32lriscv.c:98: undefined reference to `bfd_elf32_riscv_restart_relax_sections'
That's due to needing --enable-64-bit-bfd to get the riscv BFD support
built.
* Makefile.am (ALL_EMULATION_SOURCES): Move riscv files to..
(ALL_64_EMULATION_SOURCES): ..here.
* Makefile.in: Regenerate.
|
|
Add support for TLS in XCOFF. Amongst the things done by this commit:
- Update XCOFF auxialiary header to match new version and allow TLS
sections.
- Add TLS sections (.tdata and .tbss) support in gas and ld.
- Add support for the TLS relocations in gas and ld.
Two different types BFD_RELOC are created for PPC and PPC64 as
the size is a pointer, thus distinct in 32 or 64bit.
The addresses given by ld to .tdata and .tbss is a bit special. In
XCOFF, these addresses are actually offsets from the TLS pointer
computed at runtime. AIX assembly and linker does the same. In
top of that, the .tdata must be before .data (this is mandatory for AIX
loader). Thus, the aix ld script is recomputing "." before .data to restore
its original value. There might be a simpler way, but this one is working.
Optimisation linked to TLS relocations aren't yet implemented.
bfd/
* reloc.c (BFD_RELOC_PPC_TLS_LE, BFD_RELOC_PPC_TLS_IE,
BFD_RELOC_PPC_TLS_M, BFD_RELOC_PPC_TLS_ML, BFD_RELOC_PPC64_TLS_GD,
BFD_RELOC_PPC64_TLS_LD, BFD_RELOC_PPC64_TLS_LE,
BFD_RELOC_PPC64_TLS_IE, BFD_RELOC_PPC64_TLS_M,
BFD_RELOC_PPC64_TLS_ML): New relocations.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* coff-rs6000.c (xcoff_calculate_relocation): Call
xcoff_reloc_type_tls for TLS relocations.
(xcoff_howto_table): Implement TLS relocations.
(_bfd_xcoff_reloc_type_lookup): Add cases TLS relocations.
(xcoff_reloc_type_tls): New function.
* coff64-rs6000.c (xcoff_calculate_relocation): Likewise.
(xcoff_howto_table): Likewise.
(_bfd_xcoff_reloc_type_lookup): Likewise.
* coffcode.h (sec_to_styp_flags): Handle TLS sections.
(styp_to_sec_flags): Likewise.
(coff_compute_section_file_positions): Avoid file offset
optimisation for .data when the previous section is .tdata.
(coff_write_object_contents): Handle TLS sections.
* coffswap.h (coff_swap_aouthdr_out): Add support for
new fields in aouthdr.
* libxcoff.h (xcoff_reloc_type_tls): Add prototype.
* xcofflink.c (xcoff_link_add_symbols): Handle XMC_UL.
(xcoff_need_ldrel_p): Add cases for TLS relocations.
(xcoff_create_ldrel): Add l_symndx for TLS sections.
gas/
* config/tc-ppc.c (ppc_xcoff_text_section, ppc_xcoff_data_section,
(ppc_xcoff_bss_section, ppc_xcoff_tdata_section,
(ppc_xcoff_tbss_section): New variables.
(ppc_text_subsegment, ppc_text_csects, ppc_data_subgments,
(ppc_data_csects): Removed.
(ppc_xcoff_section_is_initialized, ppc_init_xcoff_section,
ppc_xcoff_parse_cons): New functions.
(md_being): Initialize XCOFF sections.
(ppc_xcoff_suffix): Add support for TLS relocations
(fixup_size, md_apply_fix): Add support for new BFD_RELOC.
(ppc_change_csect): Handle XMC_TL, XMC_UL. Correctly, add XMC_BS
to .bss section. Handle new XCOFF section variables.
(ppc_comm): Likewise.
(ppc_toc): Likewise.
(ppc_symbol_new_hook): Likewise.
(ppc_frob_symbol): Likewise.
(ppc_fix_adjustable): Add tbss support.
* config/tc-ppc.h (TC_PARSE_CONS_EXPRESSION): New define.
(ppc_xcoff_parse_cons): Add prototype.
(struct ppc_xcoff_section): New structure.
ld/
* emultempl/aix.em: Ensure .tdata section is removed
if empty, even with -r flag.
* scripttempl/aix.sc: Handle TLS sections.
* testsuite/ld-powerpc/aix52.exp: Add new tests.
* testsuite/ld-powerpc/aix-tls-reloc-32.d: New test.
* testsuite/ld-powerpc/aix-tls-reloc-64.d: New test.
* testsuite/ld-powerpc/aix-tls-reloc.ex: New test.
* testsuite/ld-powerpc/aix-tls-reloc.s: New test.
* testsuite/ld-powerpc/aix-tls-section-32.d: New test.
* testsuite/ld-powerpc/aix-tls-section-64.d: New test.
* testsuite/ld-powerpc/aix-tls-section.ex: New test.
* testsuite/ld-powerpc/aix-tls-section.s: New test.
include/
* coff/internal.h (struct internal_aouthdr): Add new fields.
* coff/rs6000.h (AOUTHDRÃ): Add new fields.
* coff/rs6k64.h (struct external_filehdr): Likewise.
* coff/xcoff.h (_TDATA), _TBSS): New defines
(RS6K_AOUTHDR_TLS_LE, RS6K_AOUTHDR_RAS, RS6K_AOUTHDR_ALGNTDATA,
RS6K_AOUTHDR_SHR_SYMTAB, RS6K_AOUTHDR_FORK_POLICY,
RS6K_AOUTHDR_FORK_COR): New defines.
(XMC_TU): Removed.
(XMC_UL): New define.
|
|
Implement support for largetoc on XCOFF.
R_TOCU and R_TOCL are referenced by the new BFD defines:
BFD_RELOC_PPC_TOC16_HI and BFD_RELOC_PPC_TOC16_LO.
A new toc storage class is added XMC_TE.
In order to correctly handle R_TOCU, the logic behind
xcoff_reloc_type_toc is changed to compute the whole TOC offset
instead of just the difference between the "link" offset and the
"assembly" offset.
In gas, add a function to transform addis format used by AIX
"addis RT, D(RA)" into the ELF format "addis RT, RA, SI".
bfd/
* reloc.c (BFD_RELOC_PPC_TOC16_HI, BFD_RELOC_PPC_TOC16_LO):
New relocations.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* coff-rs6000.c (xcoff_calculate_relocation): Call
xcoff_reloc_type_toc for R_TOCU and R_TOCL.
(xcoff_howto_table): Remove src_mask for TOC relocations.
Add R_TOCU and R_TOCL howtos.
(_bfd_xcoff_reloc_type_lookup): Add cases for
BFD_RELOC_PPC_TOC16_HI and BFD_RELOC_PPC_TOC16_LO.
(xcoff_reloc_type_toc): Compute the whole offset.
Implement R_TOCU and R_TOCL.
* coff64-rs6000.c (xcoff64_calculate_relocation):
Likewise.
(xcoff64_howto_table): Likewise.
(xcoff64_reloc_type_lookup): Likewise.
gas/
* config/tc-ppc.c (ppc_xcoff_suffix): New function.
(MAP, MAP32, MAP64): New macros for XCOFF.
(ppc_xcoff_fixup_addis): New function.
(ppc_is_toc_sym): Handle XMC_TE.
(fixup_size): Add cases for BFD_RELOC_PPC_TOC16_HI and
BFD_RELOC_PPC_TOC16_LO.
(md_assemble): Call ppc_xcoff_fixup_addis for XCOFF.
(ppc_change_csect): Handle XMC_TE.
(ppc_tc): Enable .tc symbols to have only a XMC_TC or XMC_TE
storage class.
(ppc_symbol_new_hook): Handle XMC_TE.
(ppc_frob_symbol): Likewise.
(ppc_fix_adjustable): Likewise.
(md_apply_fix): Handle BFD_RELOC_PPC_TOC16_HI and
BFD_RELOC_PPC_TOC16_LO.
ld/
* scripttempl/aix.sc: Add .te to .data section.
* testsuite/ld-powerpc/aix52.exp: Add test structure for AIX7+.
Add aix-largetoc-1 test.
* testsuite/ld-powerpc/aix-largetoc-1-32.d: New test.
* testsuite/ld-powerpc/aix-largetoc-1-64.d: New test.
* testsuite/ld-powerpc/aix-largetoc-1.ex: New test.
* testsuite/ld-powerpc/aix-largetoc-1.s: New test.
|