Age | Commit message (Collapse) | Author | Files | Lines |
|
PR 29411
* configure.tgt (ac_default_ld_warn_rwx_segments): Disable for
sparc-solaris configurations.
|
|
Three pppc32 ld tests fail when spe support is included in the linker
due to this snippet in ld/emulparams/elf32ppc.sh.
if grep -q 'ld_elf32_spu_emulation' ldemul-list.h; then
DATA_START_SYMBOLS="${RELOCATING+*crt1.o(.data .data.* .gnu.linkonce.d.*)
PROVIDE (__spe_handle = .);
*(.data.spehandle)
. += 4 * (DEFINED (__spe_handle) || . != 0);}"
fi
* testsuite/ld-powerpc/tlsexe32.r: Pass with .data section present.
* testsuite/ld-powerpc/tlsexe32no.r: Likewise.
* testsuite/ld-powerpc/tlsso32.r: Likewise.
|
|
|
|
When GCC 12 is used to build binutils with -O0, the following 2 tests
failed:
FAIL: Conflicted data syms, partially indexed, stripped, with variables
FAIL: Conflicted data syms, partially indexed, stripped
Compile 2 tests with -O2 to avoid test failures.
PR ld/29378
* testsuite/ld-ctf/data-func-conflicted-vars.d: Compile with -O2.
* testsuite/ld-ctf/data-func-conflicted.d: Likewise.
|
|
gas/testsuite/gas/all/
gas.exp
gas/testsuite/gas/loongarch/
jmp_op.d
jmp_op.s
macro_op.d
macro_op.s
macro_op_32.d
macro_op_32.s
macro_op_large_abs.d
macro_op_large_abs.s
macro_op_large_pc.d
macro_op_large_pc.s
reloc.d
reloc.s
ld/testsuite/ld-elf/
pr26936.d
shared.exp
ld/testsuite/ld-loongarch-elf/
attr-ifunc-4.c
attr-ifunc-4.out
disas-jirl.d
ifunc.exp
jmp_op.d
jmp_op.s
libnopic-global.s
macro_op.d
macro_op.s
macro_op_32.d
macro_op_32.s
nopic-global-so.rd
nopic-global-so.sd
nopic-global.out
nopic-global.s
nopic-global.sd
nopic-global.xd
nopic-local.out
nopic-local.rd
nopic-local.s
nopic-local.sd
nopic-local.xd
nopic-weak-global-so.rd
nopic-weak-global-so.sd
nopic-weak-global.out
nopic-weak-global.s
nopic-weak-global.sd
nopic-weak-global.xd
nopic-weak-local.out
nopic-weak-local.rd
nopic-weak-local.s
nopic-weak-local.sd
nopic-weak-local.xd
pic.exp
pic.ld
|
|
Some R_LARCH_64 in section .eh_frame will to generate
R_LARCH_NONE, we change relocation to R_LARCH_32_PCREL
from R_LARCH_64 in setction .eh_frame and not generate
dynamic relocation for R_LARCH_32_PCREL.
Add New relocate type R_LARCH_32_PCREL for .eh_frame.
include/elf/
loongarch.h
bfd/
bfd/bfd-in2.h
libbfd.h
reloc.c
elfxx-loongarch.c
elfnn-loongarch.c
gas/config/
tc-loongarch.c
binutils/
readelf.c
ld/testsuite/ld-elf/
eh5.d
|
|
On seeing PR29369 my suspicion was naturally on a recent powerpc64
change, commit 0ab80031430e. Without a reproducer, I spent time
wondering what could have gone wrong, and while I doubt this patch
would have fixed the PR, there are some improvements that can be made
to cater for user silliness.
I also noticed that when -z relro -z now sections are created out of
order, with .got before .plt in the section headers but .got is laid
out at a higher address. That's due to the address expression for
.branch_lt referencing SIZEOF(.got) and so calling init_os (which
creates a bfd section) for .got before the .plt section is created.
Fix that by ignoring SIZEOF in exp_init_os. Unlike ADDR and LOADADDR
which need to reference section vma and lma respectively, SIZEOF can
and does cope with a missing bfd section by returning zero for its
size, which of course is correct.
PR 29369
* ldlang.c (exp_init_os): Don't create a bfd section for SIZEOF.
* emulparams/elf64ppc.sh (OTHER_RELRO_SECTIONS_2): Revise
.branch_lt address to take into account possible user sections
with alignment larger than 8 bytes.
|
|
sbrk hasn't been used in binutils/ or ld/ for quite some time (so the
PR was fixed a while ago). Tidy up configury.
PR 17122
binutils/
* configure.ac: Don't check for sbrk.
* sysdep.h (sbrk): Don't supply fallback declaration.
* config.in: Regenerate.
* configure: Regenerate.
ld/
* configure.ac: Don't check for sbrk.
* config.in: Regenerate.
* configure: Regenerate.
|
|
We can't use the PLT entry as the function address for PIC since the PIC
register may not be set up properly for indirect call.
bfd/
PR ld/27998
* elf32-i386.c (elf_i386_relocate_section): Don't allow GOTOFF
relocation against IFUNC symbol for PIC.
ld/
PR ld/27998
* testsuite/ld-i386/pr27998a.d: Replace -shared with -e bar.
* testsuite/ld-i386/pr27998b.d: Expect a linker error.
* testsuite/ld-ifunc/ifunc-2-i386-now.d: Updated.
* testsuite/ld-ifunc/ifunc-2-local-i386-now.d: Likewise.
* testsuite/ld-ifunc/ifunc-2-i386.s: Replace @GOTOFF with @GOT.
* testsuite/ld-ifunc/ifunc-2-local-i386.s: Likewise.
|
|
Since glibc 2.36 will issue warnings for copy relocation against
protected symbols and non-canonical reference to canonical protected
functions, change the linker to always disallow such relocations.
bfd/
* elf32-i386.c (elf_i386_scan_relocs): Remove check for
elf_has_indirect_extern_access.
* elf64-x86-64.c (elf_x86_64_scan_relocs): Likewise.
(elf_x86_64_relocate_section): Remove check for
elf_has_no_copy_on_protected.
* elfxx-x86.c (elf_x86_allocate_dynrelocs): Check for building
executable instead of elf_has_no_copy_on_protected.
(_bfd_x86_elf_adjust_dynamic_symbol): Disallow copy relocation
against non-copyable protected symbol.
* elfxx-x86.h (SYMBOL_NO_COPYRELOC): Remove check for
elf_has_no_copy_on_protected.
ld/
* testsuite/ld-i386/i386.exp: Expect linker error for PR ld/17709
test.
* testsuite/ld-i386/pr17709.rd: Removed.
* testsuite/ld-i386/pr17709.err: New file.
* testsuite/ld-x86-64/pr17709.rd: Removed.
* testsuite/ld-x86-64/pr17709.err: New file.
* testsuite/ld-x86-64/pr28875-func.err: Updated.
* testsuite/ld-x86-64/x86-64.exp: Expect linker error for PR
ld/17709 test. Add tests for function pointer against protected
function.
|
|
Call _bfd_elf_symbol_refs_local_p with local_protected==true. This has
2 noticeable effects for -shared:
* GOT-generating relocations referencing a protected data symbol no
longer lead to a GLOB_DAT (similar to a hidden symbol).
* Direct access relocations (e.g. R_X86_64_PC32) no longer has the
confusing diagnostic below.
__attribute__((visibility("protected"))) void *foo() {
return (void *)foo;
}
// gcc -fpic -shared -fuse-ld=bfd
relocation R_X86_64_PC32 against protected symbol `foo' can not be used when making a shared object
The new behavior matches arm, aarch64 (commit
83c325007c5599fa9b60b8d5f7b84842160e1d1b), and powerpc ports, and other
linkers: gold and ld.lld.
Note: if some code tries to use direct access relocations to take the
address of foo, the pointer equality will break, but the error should be
reported on the executable link, not on the innocent shared object link.
glibc 2.36 will give a warning at relocation resolving time.
With this change, `#define elf_backend_extern_protected_data 1` is no
longer effective. Just remove it.
Remove the test "Run protected-func-1 without PIE" since -fno-pic
address taken operation in the executable doesn't work with protected
symbol in a shared object by default. Similarly, remove
protected-data-1a and protected-data-1b. protected-data-1b can be made
working by removing HAVE_LD_PIE_COPYRELOC from GCC
(https://sourceware.org/pipermail/gcc-patches/2022-June/596678.html).
|
|
Pass -nostdlib to compiler with -r to avoid unnecessary .o file and
libraries.
PR ld/29377
* testsuite/ld-elf/linux-x86.exp: Pass -nostdlib with -r.
|
|
Only check invalid relocation against protected symbol defined in shared
object.
bfd/
PR ld/29377
* elf32-i386.c (elf_i386_scan_relocs): Only check invalid
relocation against protected symbol defined in shared object.
* elf64-x86-64.c (elf_x86_64_scan_relocs): Likewise.
ld/
PR ld/29377
* testsuite/ld-elf/linux-x86.exp: Run PR ld/29377 tests.
* testsuite/ld-elf/pr29377a.c: New file.
* testsuite/ld-elf/pr29377b.c: Likewise.
|
|
|
|
|
|
|
|
commit d0e0f9c87a3e results "ERROR: i586-linux-cc does not exist" if
cross-building an i586-linux target without a target compiler
installed.
* testsuite/ld-elf/linux-x86.exp (compiler_honours_aligned): New.
Use it after first testing check_compiler_available.
|
|
When the compiler doesn't properly arrange for foo's alignment, there's
no point even trying these tests. Report the situation as a single
"unsupported" test.
|
|
plt_branch stubs are similar to plt_call stubs in that they branch
via bctr. Align them too.
bfd/
* elf64-ppc.c (ppc_size_one_stub): Align plt_branch stubs as for
plt_call stubs.
ld/
* testsuite/ld-powerpc/elfv2exe.d: Adjust for plt_branch changes.
* testsuite/ld-powerpc/notoc.d: Likewise.
* testsuite/ld-powerpc/notoc.wf: Likewise.
* testsuite/ld-powerpc/notoc3.d: Likewise.
* testsuite/ld-powerpc/pr23937.d: Likewise.
|
|
PR 29263
* configure.ac: Fix typo.
* testsuite/ld-elf/elf.exp: Add mips to targets that need
--warn-execstack to pass first pr29072 test.
|
|
PR 29263
* configure.ac: Move HPPA specific code from here...
* configure.tgt: ... to here. Add similar code for MIPS.
Move code for CRIS, MIPS and HPPA to block at start of file.
* configure: Regenerate.
|
|
Commit 04f096fb9e25 ("Move the xc16x target to the obsolete list") moved
the architecture from the "obsolete but still available" to the
"obsolete / support removed" list in config.bfd, making the architecture
impossible to enable (except maybe via "enable everything" options").
Note that I didn't touch */po/*.po{,t} on the assumption that these
would be updated by some (half)automatic means.
|
|
.branch_lt is really an extension of .plt, as is .iplt. We'd like all
of the PLT sections to be fixed relative to .TOC. after stub sizing,
because changes in offset to PLT entries might mean a change in stub
sizes. When -z relro, the relro layout does this by laying out
sections from the end of the relro segment. So for example, a change
in .eh_frame (which happens after stub sizing) will keep the same GOT
to PLT offset when -z relro. Not so when -z norelro, because then the
usual forward layout of section is done and .got is more aligned than
.branch_lt.
* emulparams/elf64ppc.sh: Set .branch_lt address fixed relative
to .got.
* testsuite/ld-powerpc/elfv2exe.d: Adjust to suit.
|
|
A number of targets use assignments like:
. = DATA_SEGMENT_RELRO_END (SIZEOF (.got.plt) >= 12 ? 12 : 0, .);
(from i386) in linker scripts to put the end of the relro segment past
the header in .got.plt. Examination of testcases like those edited by
this patch instead sees the end of the relro segment being placed at
the start of .got.plt. For the i386 pie1 test:
[ 9] .got.plt PROGBITS 00002000 001000 00000c 04 WA 0 0 4
GNU_RELRO 0x000f90 0x00001f90 0x00001f90 0x00070 0x00070 R 0x1
A map file shows:
.dynamic 0x0000000000001f90 0x70
*(.dynamic)
.dynamic 0x0000000000001f90 0x70 tmpdir/pie1.o
0x0000000000001f90 _DYNAMIC
.got 0x0000000000002000 0x0
*(.got)
.got 0x0000000000002000 0x0 tmpdir/pie1.o
*(.igot)
0x0000000000002ff4 . = DATA_SEGMENT_RELRO_END (., (SIZEOF (.got.plt) >= 0xc)?0xc:0x0)
.got.plt 0x0000000000002000 0xc
*(.got.plt)
.got.plt 0x0000000000002000 0xc tmpdir/pie1.o
0x0000000000002000 _GLOBAL_OFFSET_TABLE_
The DATA_SEGMENT_RELRO_END value in the map file is weird too. All of
this is triggered by SIZEOF (.got.plt) being evaluated wrongly as
zero. Fix it by taking into account the action of
lang_reset_memory_regions during relaxation.
* ldexp.c (fold_name <SIZEOF>): Use rawsize if size has been reset.
* ldlang.c (lang_size_sections_1): Don't reset processed_vma here.
* testsuite/ld-i386/pie1.d: Adjust to suit.
* testsuite/ld-x86-64/pr20830a.d: Likewise.
* testsuite/ld-x86-64/pr20830b.d: Likewise.
* testsuite/ld-x86-64/pr21038a.d: Likewise.
* testsuite/ld-x86-64/pr21038b.d: Likewise.
* testsuite/ld-x86-64/pr21038c.d: Likewise.
|
|
Similar to commit 4fb55bf6a9606eb7b626c30a9f4e71d6c2d4fbb2 for aarch64.
Commit b68a20d6675f1360ea4db50a9835c073675b9889 changed ld to produce
R_ARM_GLOB_DAT but that defeated the purpose of protected visibility
as an optimization. Restore the previous behavior (which matches
ld.lld) by defining elf_backend_extern_protected_data to 0.
|
|
__attribute__((visibility("protected"))) void *foo() {
return (void *)foo;
}
gcc -fpic -shared -fuse-ld=bfd fails with the confusing diagnostic:
relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `foo' which may bind externally can not be used when making a shared object; recompile with -fPIC
Call _bfd_elf_symbol_refs_local_p with local_protected==true to suppress
the error. The new behavior matches gold and ld.lld.
Note: if some code tries to use direct access relocations to take the
address of foo (likely due to -fno-pic), the pointer equality will
break, but the error should be reported on the executable link, not on
the innocent shared object link. glibc 2.36 will give a warning at
relocation resolving time.
|
|
Follow-up to commit 90b7a5df152a64d2bea20beb438e8b81049a5c30
("aarch64: Disallow copy relocations on protected data").
Commit 32f573bcb3aaa1c9defcad79dbb5851fcc02ae2d changed ld to produce
R_AARCH64_GLOB_DAT but that defeated the purpose of protected visibility
as an optimization. Restore the previous behavior (which matches
ld.lld) by defining elf_backend_extern_protected_data to 0.
|
|
If an executable has copy relocations for extern protected data, that
can only work if the shared object containing the definition is built
with assumptions (a) the compiler emits GOT-generating relocations (b)
the linker produces R_*_GLOB_DAT instead of R_*_RELATIVE. Otherwise the
shared object uses its own definition directly and the executable
accesses a stale copy. Note: the GOT relocations defeat the purpose of
protected visibility as an optimization, and it turns out this never
worked perfectly.
glibc 2.36 will warn on copy relocations on protected data. Let's
produce a warning at link time, matching ld.lld which has been used on
many aarch64 OSes.
Note: x86 requires GNU_PROPERTY_NO_COPY_ON_PROTECTED to have the error.
This is to largely due to GCC 5's "x86-64: Optimize access to globals in
PIE with copy reloc" which started to use direct access relocations for
external data symbols in -fpie mode.
GCC's aarch64 port does not have the change. Nowadays with most builds
switching to -fpie/-fpic, aarch64 mostly doesn't need to worry about
copy relocations. So for aarch64 we simply don't check
GNU_PROPERTY_NO_COPY_ON_PROTECTED.
|
|
Things work again after this.
ld/ChangeLog:
* configure: Regenerate.
|
|
the target is the HPPA architecture.
PR 29263
* configure.ac (ac_default_ld_warn_execstack): Default to 'no' for
HPPA targets.
(ac_default_ld_warn_rwx_segments): Likewise.
* configure: Regenerate.
* testsuite/ld-elf/elf.exp: Add the --warn-execstack command line
option to the command line when running execstack tests for the
HPPA target.
|
|
The optimized insertion sort algorithm in `elf_link_adjust_relocs`
incorrectly assembled "runs" from unsorted entries and inserted them to an
already-sorted prefix, breaking the loop invariants of insertion sort.
This commit updates the run assembly loop to break upon encountering a
non-monotonic change in the sort key.
PR 29259
bfd/
* elflink.c (elf_link_adjust_relocs): Ensure run being inserted
is sorted.
ld/
* testsuite/ld-elf/pr29259.d,
* testsuite/ld-elf/pr29259.s,
* testsuite/ld-elf/pr29259.t: New test.
|
|
At least one place calling list_matching_formats failed to free the
"matching" vector from bfd_check_format_matches afterwards. Fix that
by calling free inside list_matching_formats.
binutils/
* bucomm.c (list_matching_formats): Free arg.
* addr2line.c (process_file): Adjust to suit.
* ar.c (open_inarch, ranlib_touch): Likewise.
* coffdump.c (main): Likewise.
* nm.c (display_archive, display_file): Likewise.
* objcopy.c (copy_file): Likewise.
* objdump.c (display_object_bfd): Likewise.
* size.c (display_bfd): Likewise.
* srconv.c (main): Likewise.
ld/
* ldlang.c (load_symbols): Free "matching".
|
|
MIPS should not be using BFD_RELOC_16 for its R_MIPS_16 relocation,
since R_MIPS_16 specifies a 16-bit field in a 32-bit word.
BFD_RELOC_16, emitted by generic code to handle fixups on 16-bit data
directives, expects fixups to operate on the whole of a 16-bit word.
This patch corrects the problem by using BFD_RELOC_MIPS_16, a new bfd
reloc that is used to generate R_MIPS_16. BFD_RELOC_16 is handled in
md_apply_fix for cases where the fixup can be applied at assembly
time. Like BFD_RELOC_8, BFD_RELOC_16 now has no corresponding object
file relocation, and thus .half, .hword, .short and .dc.w must be
resolved at assembly time. BFD_RELOC_MIPS_REL16 is removed by this
patch since it isn't used.
PR 3243
PR 26542
* reloc.c (BFD_RELOC_MIPS_16): Rename from BFD_RELOC_MIPS_REL16.
* elf32-mips.c (mips_reloc_map): Map BFD_RELOC_MIPS_16 to R_MIPS_16.
* elf64-mips.c (mips_reloc_map): Likewise, delete BFD_RELOC_MIPS_REL16.
* elfn32-mips.c (mips_reloc_map): Likewise.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
gas/
* config/tc-mips.c (append_insn): Handle BFD_RELOC_MIPS_16.
(macro_build): Likewise.
(mips_percent_op <%half>): Generate BFD_RELOC_MIPS_16.
(md_apply_fix): Handle BFD_RELOC_16 and BFD_RELOC_MIPS_16 when fx_done.
ld/
* testsuite/ld-mips-elf/reloc-local-overflow.d,
* testsuite/ld-mips-elf/reloc-local-overflow.s: Rewrite.
|
|
Update
commit 68c4956b1401de70173848a6bdf620cb42fa9358
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Tue Apr 26 09:08:54 2022 -0700
x86: Properly handle function pointer reference
to properly handle IFUNC function pointer reference. Since IFUNC symbol
value is only known at run-time, set pointer_equality_needed for IFUNC
function pointer reference in PDE so that it will be resolved to its PLT
entry directly.
bfd/
PR ld/29216
* elf32-i386.c (elf_i386_scan_relocs): Set pointer_equality_needed
for IFUNC function pointer reference in PDE.
* elf64-x86-64.c (elf_x86_64_scan_relocs): Likewise.
ld/
PR ld/29216
* testsuite/ld-ifunc/ifunc.exp: Run PR ld/29216 test.
* testsuite/ld-ifunc/pr29216.c: New file.
|
|
This fixes:
FAIL: Build ifunc-1a with -z ibtplt
FAIL: Build ifunc-1a with PIE -z ibtplt
FAIL: Build libno-plt-1b.so
FAIL: No PLT (dynamic 1a)
FAIL: No PLT (dynamic 1b)
FAIL: No PLT (dynamic 1c)
FAIL: No PLT (static 1d)
FAIL: No PLT (PIE 1e)
FAIL: No PLT (PIE 1f)
FAIL: No PLT (PIE 1g)
FAIL: No PLT (dynamic 1h)
FAIL: No PLT (dynamic 1i)
FAIL: No PLT (static 1j)
* ld-i386/libno-plt-1b.dd: Remove trailing whitespaces.
* ld-i386/no-plt-1a.dd: Likewise.
* ld-i386/no-plt-1b.dd: Likewise.
* ld-i386/no-plt-1c.dd: Likewise.
* ld-i386/no-plt-1d.dd: Likewise.
* ld-i386/no-plt-1e.dd: Likewise.
* ld-i386/no-plt-1f.dd: Likewise.
* ld-i386/no-plt-1g.dd: Likewise.
* ld-i386/no-plt-1h.dd: Likewise.
* ld-i386/no-plt-1i.dd: Likewise.
* ld-i386/no-plt-1j.dd: Likewise.
* ld-i386/plt-main-ibt.dd: Likewise.
* ld-i386/plt-pie-ibt.dd: Likewise.
|
|
git commit 202be274a4 also missed adjusting a few testsuite files.
This fixes
i686-vxworks +FAIL: VxWorks shared library test 1
i686-vxworks +FAIL: VxWorks executable test 1 (dynamic)
|
|
git commit 202be274a4 went a little wild in removing trailing spaces
in gas/testsuite/gas/i386/{secidx.d,secrel.d}, causing
x86_64-w64-mingw32 +FAIL: i386 secrel reloc
x86_64-w64-mingw32 +FAIL: i386 secidx reloc
I could have just replaced the trailing space, but let's fix the
objdump output instead. Touches lots of testsuite files.
|
|
While working on another patch[1] I had need to touch this code in
i386-dis.c:
ins->obufp = ins->mnemonicendp;
for (i = strlen (ins->obuf) + prefix_length; i < 6; i++)
oappend (ins, " ");
oappend (ins, " ");
(*ins->info->fprintf_styled_func)
(ins->info->stream, dis_style_mnemonic, "%s", ins->obuf);
What this code does is add whitespace after the instruction mnemonic
and before the instruction operands.
The problem I ran into when working on this code can be seen by
assembling this input file:
.text
nop
retq
Now, when I disassemble, here's the output. I've replaced trailing
whitespace with '_' so that the issue is clearer:
Disassembly of section .text:
0000000000000000 <.text>:
0: 90 nop
1: c3 retq___
Notice that there's no trailing whitespace after 'nop', but there are
three spaces after 'retq'!
What happens is that instruction mnemonics are emitted into a buffer
instr_info::obuf, then instr_info::mnemonicendp is setup to point to
the '\0' character at the end of the mnemonic.
When we emit the whitespace, this is then added starting at the
mnemonicendp position. Lets consider 'retq', first the buffer is
setup like this:
'r' 'e' 't' 'q' '\0'
Then we add whitespace characters at the '\0', converting the buffer
to this:
'r' 'e' 't' 'q' ' ' ' ' ' ' '\0'
However, 'nop' is actually an alias for 'xchg %rax,%rax', so,
initially, the buffer is setup like this:
'x' 'c' 'h' 'g' '\0'
Then in NOP_Fixup we spot that we have an instruction that is an alias
for 'nop', and adjust the buffer to this:
'n' 'o' 'p' '\0' '\0'
The second '\0' is left over from the original buffer contents.
However, when we rewrite the buffer, we don't afjust mnemonicendp,
which still points at the second '\0' character.
Now, when we insert whitespace we get:
'n' 'o' 'p' '\0' ' ' ' ' ' ' ' ' '\0'
Notice the whitespace is inserted after the first '\0', so, when we
print the buffer, the whitespace is not printed.
The fix for this is pretty easy, I can change NOP_Fixup to adjust
mnemonicendp, but now a bunch of tests start failing, we now produce
whitespace after the 'nop', which the tests don't expect.
So, I could update the tests to expect the whitespace....
...except I'm not a fan of trailing whitespace, so I'd really rather
not.
Turns out, I can pretty easily update the whitespace emitting code to
spot instructions that have zero operands and just not emit any
whitespace in this case. So this is what I've done.
I've left in the fix for NOP_Fixup, I think updating mnemonicendp is
probably a good thing, though this is not really required any more.
I've then updated all the tests that I saw failing to adjust the
expected patterns to account for the change in whitespace.
[1] https://sourceware.org/pipermail/binutils/2022-April/120610.html
|
|
ld:
configure.tgt (cris-*-*, crisv32-*-* sans *-aout and *-linux): Unless
specified through the --enable-* -option, default to
--no-warn-rwx-segment.
Change-Id: I846bcd3e6762da807b17215a9fe337461ea0d710
|
|
In the now-historical CRIS glibc port, the default stack permission
was no-exec as in "#define DEFAULT_STACK_PERMS (PF_R|PF_W)", and the
gcc port only emits the executable-stack marker when needed; when
emitting code needing it. In other words, the binutils setting
mismatches. It doesn't matter much, except being confusing and
defaulting to "off" is more sane.
ld:
* testsuite/ld-elf/elf.exp (target_defaults_to_execstack): Switch to 0
for cris*-*-*.
bfd:
* elf32-cris.c (elf_backend_default_execstack): Define to 0.
Change-Id: I52f37598f119b19111c7a6546c00a627fca0f396
|
|
Copy initialisation over from the elf.em before_parse. Commit
ba951afb999 2022-05-03 changed behaviour on arm and score regarding
exec stack. This patch restores the previous behaviour.
* emultempl/aarch64elf.em (before_parse): Init separate_code,
warn_execstack, no_warn_rwx_segments and default_execstack.
* emultempl/armelf.em (before_parse): Likewise.
* emultempl/scoreelf.em (before_parse): Likewise.
* testsuite/ld-elf/elf.exp (target_defaults_to_execstack): Return
true for arm and nacl.
|
|
Generate a .note.package FDO package metadata ELF note, following
the spec: https://systemd.io/ELF_PACKAGE_METADATA/
If the jansson library is available at build time (and it is explicitly
enabled), link ld to it, and use it to validate that the input is
correct JSON, to avoid writing garbage to the file. The
configure option --enable-jansson has to be used to explicitly enable
it (error out when not found). This allows bootstrappers (or others who
are not interested) to seamlessly skip it without issues.
|
|
|
|
Make ld and bfd values consistent by swapping values 0 and 2 in
link_info.warn_execstack. This has the benefit of making the value an
"extended" boolean, with 0 meaning no warning, 1 meaning warn, other
values a conditional warning.
Yes, this patch introduces fails on arm/aarch64. Not a problem with
this patch but an arm/aarch64 before_parse problem.
bfd/
* elflink.c (bfd_elf_size_dynamic_sections): Adjust
warn_execstack test.
include/
* bfdlink.h (warn_execstack): Swap 0 and 2 meaning.
ld/
* configure.ac (DEFAULT_LD_WARN_EXECSTACK): Use values of 0,
1, 2 consistent with link_info.warn_execstack.
* ld.texi: Typo fixes.
* lexsup.c (parse_args): Adjust setting of link_info.warn_execstack.
(elf_static_list_options): Adjust help message conditions.
* configure: Regenerate.
|
|
PR 29006
* pe-dll.c (dll_name): Delete, replacing with..
(dll_filename): ..this, moved earlier in file.
(generate_edata): Delete parameters. Don't set up dll_name here..
(pe_process_import_defs): ..instead set up dll_filename and
dll_symname here before returning.
(dll_symname_len): Delete write-only variable.
(pe_dll_generate_implib): Don't set up dll_symname here.
|
|
Fix it some more.
bfd/
* elfnn-loongarch.c: Remove commented out elf_backend_* defines.
ld/
* testsuite/ld-elf/elf.exp (target_defaults_to_execstack): Match
arm*. Delete loongarch.
|
|
|
|
When an IR symbol SYM is referenced in IR via __real_SYM, its resolution
should be LDPR_PREVAILING_DEF, not PREVAILING_DEF_IRONLY, since LTO
doesn't know that __real_SYM should be resolved by SYM.
bfd/
PR ld/29086
* linker.c (bfd_wrapped_link_hash_lookup): Mark SYM is referenced
via __real_SYM.
include/
PR ld/29086
* bfdlink.h (bfd_link_hash_entry): Add ref_real.
ld/
PR ld/29086
* plugin.c (get_symbols): Resolve SYM definition to
LDPR_PREVAILING_DEF for __real_SYM reference.
* testsuite/ld-plugin/lto.exp: Run PR ld/29086 test.
* testsuite/ld-plugin/pr29086.c: New file.
|
|
As already done for PowerPC64, fix dynamic relocs for absolute symbols.
The patch also tidies the dynamic reloc handling code in check_relocs,
removing leftover comments and code from when check_relocs was called
as each object file was read in.
bfd/
* elf32-ppc.c (ppc_elf_check_relocs): Set isym and ifunc earlier.
Rearrange tests for dynamic relocs, handling absolute symbols.
(allocate_dynrelocs): Don't allocate dynamic relocs for locally
defined absolute symbols.
(ppc_elf_size_dynamic_sections): Similarly.
(ppc_elf_relocate_section): Similarly.
ld/
* testsuite/ld-powerpc/abs32-pie.d,
* testsuite/ld-powerpc/abs32-pie.r,
* testsuite/ld-powerpc/abs32-reloc.s,
* testsuite/ld-powerpc/abs32-shared.d,
* testsuite/ld-powerpc/abs32-shared.r,
* testsuite/ld-powerpc/abs32-static.d,
* testsuite/ld-powerpc/abs32-static.r: New tests.
* testsuite/ld-powerpc/powerpc.exp: Run them.
|
|
* aclocal.m4: Regenerate with automake 1.15.1.
|