aboutsummaryrefslogtreecommitdiff
path: root/ld
AgeCommit message (Collapse)AuthorFilesLines
2014-08-22 * emulparams/armelf_fbsd.sh (TEXT_START_ADDR): Increase alignment to ↵Andreas Tobler2-0/+8
64kB boundary like in armelf_linux.sh
2014-08-22Index PowerPC64 linker generated .eh_frame in .eh_frame_hdrAlan Modra2-14/+20
I noticed recently that .eh_frame FDEs generated by the linker for call stubs and .glink weren't being indexed in .eh_frame_hdr, due to bfd_elf_discard_info being run before the linker generated .eh_frame sections were available for parsing. This patch moves code around in elf64-ppc.c and ppc64elf.em to avoid that problem. Another problem fixed here is that --gc-sections parses .eh_frame early, and the existing machinery allows only one go at parsing the .eh_frame sections. That resulted in the linker generated .eh_frame CIEs not being merged and no .eh_frame_hdr index entries for those FDEs. It turns out that all the info from parsing .eh_frame is attached to the section, so order of parsing isn't important, and after parsing sec_info_type being set will prevent a section being parsed again. At least, when parsing doesn't hit an error. So there isn't really any need for "parsed_eh_frame". "merge_cies" is also redundant, which means _bfd_elf_{begin,end}_eh_frame_parsing can also disappear. bfd/ * elf-bfd.h (struct eh_frame_hdr_info): Delete merge_cies and parsed_eh_frames. (_bfd_elf_begin_eh_frame_parsing): Delete. (_bfd_elf_end_eh_frame_parsing): Delete. * elf-eh-frame.c (_bfd_elf_begin_eh_frame_parsing): Delete. (_bfd_elf_end_eh_frame_parsing): Delete. (_bfd_elf_parse_eh_frame): Don't test parsed_eh_frame. Test !info->relocatable in place of merge_cies. * elflink.c (bfd_elf_gc_sections, bfd_elf_discard_info): Adjust. * elf64-ppc.c (glink_eh_frame_cie): Pad to multiple of 8. (ppc64_elf_size_stubs): Likewise pad stub FDE. (ppc64_elf_build_stubs): Move code setting glink .eh_frame to.. (ppc64_elf_size_stubs): ..here and.. (ppc64_elf_finish_dynamic_sections): ..here. ld/ * emultempl/ppc64elf.em (gld${EMULATION_NAME}_after_allocation): Call bfd_elf_discard_info after generating glink .eh_frame. Delete redundant test on ppc64_elf_setup_section_lists status.
2014-08-21bfd/ChangeLogTerry Guo9-0/+178
2014-08-21 Tony Wang <tony.wang@arm.com> * elf32-arm.c (elf32_arm_final_link_relocate): Implement the veneer routine for R_ARM_THM_JUMP19. (arm_type_of_stub): Add conditional clause for R_ARM_THM_JUMP19 (elf32_arm_size_stub): Ditto. ld/testsuite/ChangeLog 2014-08-21 Tony Wang <tony.wang@arm.com> * ld-arm/jump-reloc-veneers-cond.s: New test. * ld-arm/farcall-cond-thumb-arm.s: Ditto. * ld-arm/jump-reloc-veneers-cond-short.d: Expected output for target without a veneer generation. * ld-arm/jump-reloc-veneers-cond-long.d: Expected output for target with a veneer generation. * ld-arm/farcall-cond-thumb-arm.d: Expected output for inter working veneer generation. * ld-arm/arm-elf.exp: Add tests for conditional branch veneer.
2014-08-20ARM/ld: Correct macro formatting in armelf.emMaciej W. Rozycki2-3/+8
* emultempl/armelf.em (OPTION_STUBGROUP_SIZE): Fix formatting. (OPTION_NO_MERGE_EXIDX_ENTRIES, OPTION_LONG_PLT): Likewise.
2014-08-20Fix PR ld/17277: bogus dynamic relocs and TEXTREL for ARM PC-relative relocsRoland McGrath4-0/+52
bfd/ PR ld/17277 * elf32-arm.c (elf32_arm_check_relocs): Increment P->pc_count for all reloc types with pc_relative set in the howto, not just for R_ARM_REL32 and R_ARM_REL32_NOI. (allocate_dynrelocs_for_symbol): Update comment. (elf32_arm_gc_sweep_hook): For all reloc types with pc_relative set in the howto, set call_reloc_p and may_need_local_target_p but not may_become_dynamic_p; not only for R_ARM_REL32 and R_ARM_REL32_NOI. (elf32_arm_check_relocs): Likewise. ld/testsuite/ PR ld/17277 * ld-arm/pcrel-shared.s: New file. * ld-arm/pcrel-shared.rd: New file. * ld-arm/arm-elf.exp (armelftests_common): Add it.
2014-08-20ARM: Add support for armeb-*-eabi*Will Newton2-1/+6
At the moment it is possible to configure binutils for these triples but the resulting linker defaults to little endian with huge numbers of testsuite failures, which on the face of it does not appear to make much sense. This patch makes the behaviour similar to armeb-elf and the testsuite is clean. bfd/ChangeLog: 2014-08-20 Will Newton <will.newton@linaro.org> * config.bfd: Default armeb-*-eabi* to big endian. ld/ChangeLog: 2014-08-20 Will Newton <will.newton@linaro.org> * configure.tgt: Default armeb-*-eabi* to big endian.
2014-08-20Enabling the HIGH_ENTROPY_VA flag allows the operating system to useNick Clifton3-0/+17
addresses outside of the 32-bit range before memory exhaustion. This results in a higher entropy implementation of ASLR when used with the DYNAMIC_BASE flag. * include/coff/pe.h: Add HIGH_ENTROPY_VA flag * ld/emultempl/pep.em: Add --high-entropy-va switch * ld/ld.texinfo: Document the --high-entropy-va switch
2014-08-20Add copyright notice to linker script files.Nick Clifton90-58/+1203
2014-08-19Fix --diable-shared --enable-plugins build breakageAlan Modra2-0/+62
Directories that don't use libtool need to add -ldl (on most *nix hosts) to provide dlopen for libbfd. config/ * plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to LIBS via AC_SEARCH_LIBS. gdb/ * acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl. * config.in: Regenerate. sim/ppc/ * configure.ac: Invoke AC_PLUGINS. * config.in: Regenerate. and regen lots of configure files.
2014-08-18LTO plugin with older gccAlan Modra2-1/+5
* ld-plugin/lto.exp: Use gcc -print-file-name to find lto plugin.
2014-08-18PR 17287, DT_NEEDED of unneeded libraries affects --as-neededAlan Modra5-2/+32
PR 17287 bfd/ * elflink.c (on_needed_list): Only consider libraries that have been loaded. ld/ * ld.texinfo (--as-needed): Clarify that references from libraries must be from needed libraries. ld/testsuite/ * ld-plugin/needed3.c: New file. * ld-elf/shared.exp: Add needed3 test.
2014-08-18Return error status from bfd_elf_discard_info.Alan Modra10-28/+94
bfd/ * elflink.c (bfd_elf_discard_info): Return int error status. * stabs.c (_bfd_discard_section_stabs): Comment typo fix. * bfd-in.h (bfd_elf_discard_info): Updata prototype. * bfd-in2.h: Regenerate. ld/ * emultempl/aarch64elf.em (gld${EMULATION_NAME}_after_allocation): Handle error status from bfd_elf_discard_info. * emultempl/armelf.em: Likewise. * emultempl/elf32.em: Likewise. * emultempl/hppaelf.em: Likewise. * emultempl/metagelf.em: Likewise. * emultempl/nios2elf.em: Likewise. * emultempl/ppc64elf.em: Likewise. * emultempl/tic6xdsbt.em: Likewise. * emultempl/vms.em: Likewise.
2014-08-14Linker part of PR16563 fixAlan Modra5-7/+53
Presents .eh_frame input sections to the optimisation machinery in elf-eh-frame.c in the order they are given by the linker script. PR 16563 bfd/ * elflink.c (bfd_elf_discard_info): Process .eh_frame and .stab in the order they are mapped to output sections. ld/ * ldlang.c (map_head_is_link_order): Rename from stripped_excluded_sections. (lang_clear_os_map): New function, extracted from.. (strip_excluded_output_sections): ..here. * ldlang.h (lang_clear_os_map): Declare. * ldwrite.c (ldwrite): Call lang_clear_os_map. * emultempl/sh64elf.em (sh64_elf_${EMULATION_NAME}_after_allocation): Likewise.
2014-08-14configury changes to make ld plugin support controlled by --enable-pluginsAlan Modra4-881/+858
This also makes --enable-plugins default to on for hosts that can support plugins, so we have consistent lto toolchain support. The ACX_LARGEFILE moves aren't strictly necessary, but are harmless and will be necessary if plugin support is extended to more hosts via libtool's dlopen support. I started down that path then decided it was more work than I was interested in doing. (ACX_LARGEFILE invokes AC_PLUGINS.) config/ * plugins.m4: Test for dlfcn.h or windows.h here to set default for --enable-plugins. Report error if someone tries to enable plugins on a host we don't support. bfd/ * configure.ac: Delete redundant plugin related checks. * configure: Regenerate. binutils/ * configure.ac: Move ACX_LARGEFILE after LT_INIT. * config.in: Regenerate. * configure: Regenerate. gas/ * configure.ac: Move ACX_LARGEFILE after LT_INIT. * config.in: Regenerate. * configure: Regenerate. gprof/ * configure.ac: Move ACX_LARGEFILE after LT_INIT. * configure: Regenerate. * gconfig.in: Regenerate. ld/ * configure.ac: Move AC_PROG_CC and other macros earlier. Delete plugin checks now done in config/plugins.m4. * config.in: Regenerate. * configure: Regenerate.
2014-08-14Simplify is_ir_dummy_bfd testAlan Modra2-8/+8
is_ir_dummy_bfd started life before BFD_PLUGIN was invented. * plugin.c (is_ir_dummy_bfd): Test BFD_PLUGIN flag rather than flags.claimed.
2014-08-13This is necessary for adding __cxa_atexit support for Cygwin in GCC withoutYaakov Selkowitz2-0/+6
exporting __dso_handle from every DLL. * pe-dll.c (autofilter_entry_type autofilter_symbollist_i386): Add __dso_handle.
2014-08-13Fix non-ELF build breakageAlan Modra2-2/+6
* ldlang.c (open_input_bfds): Don't use bfd_elf_get_dyn_lib_class.
2014-08-12Tighten test for ld plugin supportAlan Modra2-1/+5
To not match spu --plugin option. * lib/ld-lib.exp (check_plugin_api_available): Match "-plugin PLUGIN".
2014-08-12Fix build breakage when ld plugins disabledAlan Modra5-16/+14
* ldlang.h (struct lang_input_statement_flags): Don't make "reload" field conditional on ENABLE_PLUGINS. * ldlang.c (open_input_bfds): Expand plugin_should_reload. * plugin.h (plugin_should_reload): Delete. * plugin.c (plugin_should_reload): Delete.
2014-08-12Change ld "notice" interface for better handling of indirect symbolsAlan Modra3-17/+28
The main aim of this change was to have non_ir_ref set correctly on new indirect symbols. I could have added a "copy" param to the "notice" function, so that indirect symbols could be created in plugin_notice, but it seemed cleaner to create indirect syms earlier and pass them rather than "string" to "notice". include/ * bfdlink.h (struct bfd_link_callbacks <notice>): Remove "string" param, add "inh". bfd/ * coff-aux.c (coff_m68k_aux_link_add_one_symbol): Only call "notice" here when not calling the generic add_symbol function. Formatting. Correct handling of indirect symbols. Update notice call. * elflink.c (_bfd_elf_notice_as_needed): Update notice call. * linker.c (_bfd_generic_link_add_one_symbol): Create indirect symbols early. Update notice call. Add comments regarding weak symbols vs. indirect. ld/ * ldmain.c (notice): Update args. * plugin.c (plugin_notice): Likewise. Follow warning sym link. Handle new indirect symbol.
2014-08-12missing changelogAlan Modra1-0/+4
2014-08-12Fix non-plugin warning symbol handlingAlan Modra1-0/+1
PR ld/16746 include/ * bfdlink.h (struct bfd_link_info): Add lto_plugin_active. bfd/ * linker.c (_bfd_generic_link_add_one_symbol <WARN>): Handle !lto_plugin_active. ld/ * plugin.c (plugin_load_plugins): Set link_info.lto_plugin_active.
2014-08-08 * ldlang.h (struct lang_input_statement_flags): Add pushedUlrich Drepper5-0/+67
member. * ldlex.h (enum option_values): Add OPTION_PUSH_STATE and OPTION_POP_STATE. * lexsup.c (ld_options): Add entries for --push-state and --pop-state. (parse_args): Handle OPTION_PUSH_STATE and OPTION_POP_STATE. * ld.texinfo: Document --push-state and --pop-state.
2014-08-07Don't issue a warning for references in LTO IR to warning symbolsH.J. Lu6-0/+59
bfd/ PR ld/16746 * linker.c (_bfd_generic_link_add_one_symbol): Don't issue a warning for references in LTO IR to warning symbols. ld/testsuite/ PR ld/16746 * ld-plugin/lto.exp: Add 4 tests for PR ld/16746. * ld-plugin/pr16746a.c: New file. * ld-plugin/pr16746b.c: Likewise. * ld-plugin/pr16746c.c: Likewise. * ld-plugin/pr16746d.c: Likewise.
2014-08-06PR14918, lto always links in libgcc_s.soAlan Modra2-0/+16
PR14918 * plugin.c (plugin_opt_plugin_arg): Drop --pass-through.
2014-08-06Allow lto tests to run with older compilersAlan Modra3-268/+321
* lib/ld-lib.exp (check_lto_fat_available): New. (check_lto_available): Remove -ffat-lto-objects test. * ld-plugin/lto.exp: Use [list ] rather than { } to set up list variables, allowing substition of vars. Set lto_fat and plug_opt and add to various tests.
2014-08-05Regen ld/Makefile.inAlan Modra2-1/+5
* Makefile.in: Regenerate.
2014-08-01Fix PR10373 which is SH relax bug.Kaz Kojima3-3/+15
2014-08-01Fix PR10378 which is SH relax bug.Kaz Kojima3-0/+42
2014-07-29[MIPS] Implement O32 FPXX, FP64 and FP64A ABI extensionsMatthew Fortune165-186/+2013
Specification: https://dmz-portal.mips.com/wiki/MIPS_O32_ABI_-_FR0_and_FR1_Interlinking include/ * elf/mips.h (PT_MIPS_ABIFLAGS, SHT_MIPS_ABIFLAGS): Define. (Val_GNU_MIPS_ABI_FP_OLD_64): Rename from Val_GNU_MIPS_ABI_FP_64. (Val_GNU_MIPS_ABI_FP_64): Redefine. (Val_GNU_MIPS_ABI_FP_XX): Define. (Elf_External_ABIFlags_v0, Elf_Internal_ABIFlags_v0): New structures. (AFL_REG_NONE, AFL_REG_32, AFL_REG_64, AFL_REG_128): Define. (AFL_ASE_DSP, AFL_ASE_DSPR2, AFL_ASE_EVA, AFL_ASE_MCU): Likewise. (AFL_ASE_MDMX, AFL_ASE_MIPS3D, AFL_ASE_MT, AFL_ASE_SMARTMIPS): Likewise. (AFL_ASE_VIRT, AFL_ASE_MSA, AFL_ASE_MIPS16): Likewise. (AFL_ASE_MICROMIPS, AFL_ASE_XPA): Likewise. (AFL_EXT_XLR, AFL_EXT_OCTEON2, AFL_EXT_OCTEONP): Likewise. (AFL_EXT_LOONGSON_3A, AFL_EXT_OCTEON, AFL_EXT_5900): Likewise. (AFL_EXT_4650, AFL_EXT_4010, AFL_EXT_4100, AFL_EXT_3900): Likewise. (AFL_EXT_10000, AFL_EXT_SB1, AFL_EXT_4111, AFL_EXT_4120): Likewise. (AFL_EXT_5400, AFL_EXT_5500, AFL_EXT_LOONGSON_2E): Likewise. (AFL_EXT_LOONGSON_2F): Likewise. (bfd_mips_elf_swap_abiflags_v0_in): Prototype. (bfd_mips_elf_swap_abiflags_v0_out): Likewise. (bfd_mips_isa_ext): Likewise. bfd/ * elfxx-mips.c (ABI_O32_P, MIPS_ELF_ABIFLAGS_SECTION_NAME_P): New macro. (mips_elf_obj_tdata): Add abiflags and abiflags_valid fields. (bfd_mips_elf_swap_abiflags_v0_in): New function. (bfd_mips_elf_swap_abiflags_v0_out): Likewise. (_bfd_mips_elf_section_from_shdr): Handle SHT_MIPS_ABIFLAGS. (_bfd_mips_elf_fake_sections): Likewise. (_bfd_mips_elf_always_size_sections): Handle .MIPS.abiflags. (_bfd_mips_elf_additional_program_headers): Account for new PT_MIPS_ABIFLAGS program header. (_bfd_mips_elf_modify_segment_map): Create PT_MIPS_ABIFLAGS segment and associate with .MIPS.abiflags. (_bfd_mips_elf_gc_mark_extra_sections): New function. (bfd_mips_isa_ext, update_mips_abiflags_isa): New static function. (infer_mips_abiflags): Likewise. (_bfd_mips_elf_final_link): Handle .MIPS.abiflags. (mips_32bit_flags_p): Moved higher. (mips_elf_merge_obj_attributes, _bfd_mips_fp_abi_string): Error checking for FP ABIs. (_bfd_mips_elf_merge_private_bfd_data): Restructure and add abiflags checks. Check EF_MIPS_FP64 flag consistency. (print_mips_ases, print_mips_isa_ext): New static function. (print_mips_fp_abi_value, get_mips_reg_size): Likewise. (_bfd_mips_elf_print_private_bfd_data): Display abiflags data. (_bfd_mips_post_process_headers): Set EI_ABIVERSION = 3 for Val_GNU_MIPS_ABI_FP_64 or Val_GNU_MIPS_ABI_FP_64A. * elfxx-mips.h (_bfd_mips_elf_gc_mark_extra_sections): New prototype. * elf32-mips.c (elf_backend_gc_mark_extra_sections): Implement. * elfn32-mips.c (elf_backend_gc_mark_extra_sections): Implement. * elf64-mips.c (elf_backend_gc_mark_extra_sections): Implement. binutils/ * readelf.c (get_mips_segment_type): Display name for PT_MIPS_ABIFLAGS. (get_mips_section_type_name): Display name for SHT_MIPS_ABIFLAGS. (display_mips_gnu_attribute): Abstracted fp abi printing to... (print_mips_fp_abi_value): New static function. Handle new FP ABIs. (print_mips_ases, print_mips_isa_ext): New static functions. (get_mips_reg_size): Likewise. (process_mips_specific): Display abiflags data. elfcpp/ * elfcpp.h (PT_MIPS_ABIFLAGS): New program header type. gas/ * config/tc-mips.c (mips_flags_frag): New static global. (struct mips_set_options): Add oddspreg field. (file_mips_opts, mips_opts): Initialize oddspreg. (ISA_HAS_ODD_SINGLE_FPR): Add CPU argument and update for R5900 and Loongson-3a. (enum options, md_longopts, md_parse_option): Add -mfpxx, -modd-spreg and -mno-odd-spreg options. (md_begin): Create .MIPS.abiflags section. (fpabi_incompatible_with, fpabi_requires): New static function. (check_fpabi): Likewise. (mips_check_options): Handle fp=xx and oddspreg restrictions. (file_mips_check_options): Set oddspreg by default for fp=xx. (mips_oddfpreg_ok): Re-write function. (check_regno): Check odd numbered registers regardless of FPR size. For fp != 32 use as_bad instead of as_warn. (match_float_constant): Rewrite check regarding FP register width. Add support for generating constants when MXHC1 is present. Handle fp=xx to comply with the ABI. (macro): Update M_LI_DD similarly to match_float_constant. Generate MTHC1 when available. Check that correct code can be generated for fp=xx and fp=64 ABIs. (parse_code_option, s_mipsset): Add fp=xx, oddspreg and nooddspreg options. (mips_convert_ase_flags): New static function. (mips_elf_final_processing): Use fpabi == Val_GNU_MIPS_ABI_FP_OLD_64 to determine when to add the EF_MIPS_FP64 flag. Populate the .MIPS.abiflags section. (md_mips_end): Update .gnu_attribute based on command line and .module as applicable. Use check_fpabi to ensure .gnu.attribute and command line/.module options are consistent. * doc/as.texinfo: Add missing -mgp64/-mfp64 options and document new -mfpxx, -modd-spreg and -mno-odd-spreg options. * doc/c-mips.texi: Document -mfpxx, -modd-spreg, -mno-odd-spreg, gnu_attribute values and FP ABIs. ld/ * emulparams/elf32bmip.sh: Add .MIPS.abiflags. * emulparams/elf32bmipn32-defs.sh: Likewise. * emulparams/elf64bmip-defs.sh: Likewise. opcodes/ * micromips-opc.c (COD, LCD) New macros. (cfc1, ctc1): Remove FP_S attribute. (dmfc1, mfc1, mfhc1): Add LCD attribute. (dmtc1, mtc1, mthc1): Add COD attribute. * mips-opc.c (cfc1, cftc1, ctc, cttc1): Remove FP_S attribute. binutils/testsuite/ * binutils-all/readelf.s: Account for .MIPS.abiflags and .gnu.attributes. * binutils-all/readelf.ss-tmips: Likewise. * binutils-all/strip-3.d: Likewise. gas/testsuite/ * gas/mips/attr-gnu-4-0.d: New. * gas/mips/attr-gnu-4-0.s: Likewise. * gas/mips/attr-gnu-4-1-mfp32.l: Likewise. * gas/mips/attr-gnu-4-1-mfp32.s: Likewise. * gas/mips/attr-gnu-4-1-mfp64.l: Likewise. * gas/mips/attr-gnu-4-1-mfp64.s: Likewise. * gas/mips/attr-gnu-4-1-mfpxx.s: Likewise. * gas/mips/attr-gnu-4-1-msingle-float.l: Likewise. * gas/mips/attr-gnu-4-1-msingle-float.s: Likewise. * gas/mips/attr-gnu-4-1-msoft-float.l: Likewise. * gas/mips/attr-gnu-4-1-msoft-float.s: Likewise. * gas/mips/attr-gnu-4-1.d: Likewise. * gas/mips/attr-gnu-4-1.s: Likewise. * gas/mips/attr-gnu-4-2-mdouble-float.l: Likewise. * gas/mips/attr-gnu-4-2-mdouble-float.s: Likewise. * gas/mips/attr-gnu-4-2-msoft-float.l: Likewise. * gas/mips/attr-gnu-4-2-msoft-float.s: Likewise. * gas/mips/attr-gnu-4-2.d: Likewise. * gas/mips/attr-gnu-4-2.s: Likewise. * gas/mips/attr-gnu-4-3-mhard-float.l: Likewise. * gas/mips/attr-gnu-4-3-mhard-float.s: Likewise. * gas/mips/attr-gnu-4-3.d: Likewise. * gas/mips/attr-gnu-4-3.s: Likewise. * gas/mips/attr-gnu-4-4.l: Likewise. * gas/mips/attr-gnu-4-4.s: Likewise. * gas/mips/attr-gnu-4-5-64.l: Likewise. * gas/mips/attr-gnu-4-5-64.s: Likewise. * gas/mips/attr-gnu-4-5.d: Likewise. * gas/mips/attr-gnu-4-5.l: Likewise. * gas/mips/attr-gnu-4-5.s: Likewise. * gas/mips/attr-gnu-4-6-64.l: Likewise. * gas/mips/attr-gnu-4-6-64.s: Likewise. * gas/mips/attr-gnu-4-6.d: Likewise. * gas/mips/attr-gnu-4-6.l: Likewise. * gas/mips/attr-gnu-4-6.s: Likewise. * gas/mips/attr-gnu-4-6-msingle-float.l: Likewise. * gas/mips/attr-gnu-4-6-msingle-float.s: Likewise. * gas/mips/attr-gnu-4-6-msoft-float.l: Likewise. * gas/mips/attr-gnu-4-6-msoft-float.s: Likewise. * gas/mips/attr-gnu-4-6-noodd.l: Likewise. * gas/mips/attr-gnu-4-6-noodd.s: Likewise. * gas/mips/attr-gnu-4-7-64.l: Likewise. * gas/mips/attr-gnu-4-7-64.s: Likewise. * gas/mips/attr-gnu-4-7-msingle-float.l: Likewise. * gas/mips/attr-gnu-4-7-msingle-float.s: Likewise. * gas/mips/attr-gnu-4-7-msoft-float.l: Likewise. * gas/mips/attr-gnu-4-7-msoft-float.s: Likewise. * gas/mips/attr-gnu-4-7-odd.l: Likewise. * gas/mips/attr-gnu-4-7-odd.s: Likewise. * gas/mips/attr-gnu-4-7.d: Likewise. * gas/mips/attr-gnu-4-7.l: Likewise. * gas/mips/attr-gnu-4-7.s: Likewise. * gas/mips/attr-none-double.d: Likewise. * gas/mips/attr-none-o32-fp64.d: Likewise. * gas/mips/attr-none-o32-fp64-nooddspreg.d * gas/mips/attr-none-o32-fpxx.d: Likewise. * gas/mips/attr-none-single-float.d: Likewise. * gas/mips/attr-none-soft-float.d: Likewise. * gas/mips/elf_arch_mips32r3.d: Likewise. * gas/mips/elf_arch_mips32r5.d: Likewise. * gas/mips/elf_arch_mips64r3.d: Likewise. * gas/mips/elf_arch_mips64r5.d: Likewise. * gas/mips/li-d.d: Likewise. * gas/mips/li-d.s: Likewise. * gas/mips/module-check-warn.l: Likewise. * gas/mips/module-check-warn.s: Likewise. * gas/mips/module-check.d: Likewise. * gas/mips/module-check.s: Likewise. * gas/mips/module-mfp32.d: Likewise. * gas/mips/module-mfp32.s: Likewise. * gas/mips/module-mfp64.d: Likewise. * gas/mips/module-mfp64.s: Likewise. * gas/mips/module-mfp64-noodd.d: Likewise. * gas/mips/module-mfp64-noodd.s: Likewise. * gas/mips/module-mfpxx.d: Likewise. * gas/mips/module-mfpxx.s: Likewise. * gas/mips/module-msingle-float.d: Likewise. * gas/mips/module-msingle-float.s: Likewise. * gas/mips/module-msoft-float.d: Likewise. * gas/mips/module-msoft-float.s: Likewise. * gas/mips/module-set-mfpxx.d: Likewise. * gas/mips/module-set-mfpxx.s: Likewise. * gas/mips/fpxx-oddfpreg.d: Likewise. * gas/mips/fpxx-oddfpreg.l: Likewise. * gas/mips/fpxx-oddfpreg.s: Likewise. * gas/mips/no-odd-spreg.d: Likewise. * gas/mips/odd-spreg.d: Likewise. * gas/elf/section2.e-mips: Adjust expected output. * gas/mips/attr-gnu-abi-fp-1.d: Likewise. * gas/mips/attr-gnu-abi-msa-1.d: Likewise. * gas/mips/call-nonpic-1.d: Likewise. * gas/mips/elf_arch_mips1.d: Likewise. * gas/mips/elf_arch_mips2.d: Likewise. * gas/mips/elf_arch_mips3.d: Likewise. * gas/mips/elf_arch_mips32.d: Likewise. * gas/mips/elf_arch_mips32r2.d: Likewise. * gas/mips/elf_arch_mips4.d: Likewise. * gas/mips/elf_arch_mips5.d: Likewise. * gas/mips/elf_arch_mips64.d: Likewise. * gas/mips/elf_arch_mips64r2.d: Likewise. * gas/mips/elf_ase_micromips-2.d: Likewise. * gas/mips/elf_ase_micromips.d: Likewise. * gas/mips/elf_ase_mips16-2.d: Likewise. * gas/mips/elf_ase_mips16.d: Likewise. * gas/mips/module-defer-warn1.d: Likewise. * gas/mips/module-override.d: Likewise. * gas/mips/n32-consec.d: Likewise. * gas/mips/nan-2008-1.d: Likewise. * gas/mips/nan-2008-2.d: Likewise. * gas/mips/nan-2008-3.d: Likewise. * gas/mips/nan-2008-4.d: Likewise. * gas/mips/nan-legacy-1.d: Likewise. * gas/mips/nan-legacy-2.d: Likewise. * gas/mips/nan-legacy-3.d: Likewise. * gas/mips/nan-legacy-4.d: Likewise. * gas/mips/nan-legacy-5.d: Likewise. * gas/mips/tmips16-e.d: Likewise. * gas/mips/tmips16-f.d: Likewise. * gas/mips/tmipsel16-e.d: Likewise. * gas/mips/tmipsel16-f.d: Likewise. * gas/testsuite/gas/mips/mips.exp: Add new tests. ld/testsuite/ * ld-mips-elf/abiflags-strip1-ph.d: New. * ld-mips-elf/abiflags-strip2-ph.d: Likewise. * ld-mips-elf/abiflags-strip3-ph.d: Likewise. * ld-mips-elf/abiflags-strip4-ph.d: Likewise. * ld-mips-elf/abiflags-strip5-ph.d: Likewise. * ld-mips-elf/abiflags-strip6-ph.d: Likewise. * ld-mips-elf/abiflags-strip7-ph.d: Likewise. * ld-mips-elf/abiflags-strip8-ph.d: Likewise. * ld-mips-elf/abiflags-strip9-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-0-n32-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-0-n64-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-0-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-06.d: Likewise. * ld-mips-elf/attr-gnu-4-07.d: Likewise. * ld-mips-elf/attr-gnu-4-08.d: Likewise. * ld-mips-elf/attr-gnu-4-1-n32-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-1-n64-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-1-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-16.d: Likewise. * ld-mips-elf/attr-gnu-4-17.d: Likewise. * ld-mips-elf/attr-gnu-4-18.d: Likewise. * ld-mips-elf/attr-gnu-4-2-n32-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-2-n64-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-2-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-26.d: Likewise. * ld-mips-elf/attr-gnu-4-27.d: Likewise. * ld-mips-elf/attr-gnu-4-28.d: Likewise. * ld-mips-elf/attr-gnu-4-3-n32-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-3-n64-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-3-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-36.d: Likewise. * ld-mips-elf/attr-gnu-4-37.d: Likewise. * ld-mips-elf/attr-gnu-4-38.d: Likewise. * ld-mips-elf/attr-gnu-4-4-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-46.d: Likewise. * ld-mips-elf/attr-gnu-4-47.d: Likewise. * ld-mips-elf/attr-gnu-4-48.d: Likewise. * ld-mips-elf/attr-gnu-4-5-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-50.d: Likewise. * ld-mips-elf/attr-gnu-4-52.d: Likewise. * ld-mips-elf/attr-gnu-4-53.d: Likewise. * ld-mips-elf/attr-gnu-4-54.d: Likewise. * ld-mips-elf/attr-gnu-4-55.d: Likewise. * ld-mips-elf/attr-gnu-4-56.d: Likewise. * ld-mips-elf/attr-gnu-4-57.d: Likewise. * ld-mips-elf/attr-gnu-4-58.d: Likewise. * ld-mips-elf/attr-gnu-4-6-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-6.s: Likewise. * ld-mips-elf/attr-gnu-4-60.d: Likewise. * ld-mips-elf/attr-gnu-4-61.d: Likewise. * ld-mips-elf/attr-gnu-4-62.d: Likewise. * ld-mips-elf/attr-gnu-4-63.d: Likewise. * ld-mips-elf/attr-gnu-4-64.d: Likewise. * ld-mips-elf/attr-gnu-4-65.d: Likewise. * ld-mips-elf/attr-gnu-4-66.d: Likewise. * ld-mips-elf/attr-gnu-4-67.d: Likewise. * ld-mips-elf/attr-gnu-4-68.d: Likewise. * ld-mips-elf/attr-gnu-4-7-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-7.s: Likewise. * ld-mips-elf/attr-gnu-4-70.d: Likewise. * ld-mips-elf/attr-gnu-4-71.d: Likewise. * ld-mips-elf/attr-gnu-4-72.d: Likewise. * ld-mips-elf/attr-gnu-4-73.d: Likewise. * ld-mips-elf/attr-gnu-4-74.d: Likewise. * ld-mips-elf/attr-gnu-4-75.d: Likewise. * ld-mips-elf/attr-gnu-4-76.d: Likewise. * ld-mips-elf/attr-gnu-4-77.d: Likewise. * ld-mips-elf/attr-gnu-4-78.d: Likewise. * ld-mips-elf/attr-gnu-4-8.s: Likewise. * ld-mips-elf/attr-gnu-4-81.d: Likewise. * ld-mips-elf/empty.s: Likewise. * ld-mips-elf/attr-gnu-4-00.d: Adjust expected output. * ld-mips-elf/attr-gnu-4-01.d: Likewise. * ld-mips-elf/attr-gnu-4-02.d: Likewise. * ld-mips-elf/attr-gnu-4-03.d: Likewise. * ld-mips-elf/attr-gnu-4-04.d: Likewise. * ld-mips-elf/attr-gnu-4-05.d: Likewise. * ld-mips-elf/attr-gnu-4-10.d: Likewise. * ld-mips-elf/attr-gnu-4-11.d: Likewise. * ld-mips-elf/attr-gnu-4-14.d: Likewise. * ld-mips-elf/attr-gnu-4-15.d: Likewise. * ld-mips-elf/attr-gnu-4-2.s: Likewise. * ld-mips-elf/attr-gnu-4-20.d: Likewise. * ld-mips-elf/attr-gnu-4-22.d: Likewise. * ld-mips-elf/attr-gnu-4-24.d: Likewise. * ld-mips-elf/attr-gnu-4-25.d: Likewise. * ld-mips-elf/attr-gnu-4-3.s: Likewise. * ld-mips-elf/attr-gnu-4-30.d: Likewise. * ld-mips-elf/attr-gnu-4-33.d: Likewise. * ld-mips-elf/attr-gnu-4-34.d: Likewise. * ld-mips-elf/attr-gnu-4-35.d: Likewise. * ld-mips-elf/attr-gnu-4-40.d: Likewise. * ld-mips-elf/attr-gnu-4-41.d: Likewise. * ld-mips-elf/attr-gnu-4-42.d: Likewise. * ld-mips-elf/attr-gnu-4-43.d: Likewise. * ld-mips-elf/attr-gnu-4-44.d: Likewise. * ld-mips-elf/attr-gnu-4-45.d: Likewise. * ld-mips-elf/attr-gnu-4-5.s: Likewise. * ld-mips-elf/attr-gnu-4-51.d: Likewise. * ld-mips-elf/attr-gnu-8-00.d: Likewise. * ld-mips-elf/attr-gnu-8-01.d: Likewise. * ld-mips-elf/attr-gnu-8-02.d: Likewise. * ld-mips-elf/attr-gnu-8-10.d: Likewise. * ld-mips-elf/attr-gnu-8-11.d: Likewise. * ld-mips-elf/attr-gnu-8-20.d: Likewise. * ld-mips-elf/attr-gnu-8-22.d: Likewise. * ld-mips-elf/jalx-2.dd: Likewise. * ld-mips-elf/mips16-pic-1.gd: Likewise. * ld-mips-elf/mips16-pic-2.gd: Likewise. * ld-mips-elf/mips16-pic-3.gd: Likewise. * ld-mips-elf/mips16-pic-4a.gd: Likewise. * ld-mips-elf/multi-got-no-shared.d: Likewise. * ld-mips-elf/nan-2008.d: Likewise. * ld-mips-elf/nan-legacy.d: Rework test. * ld-mips-elf/pic-and-nonpic-3a.gd: Likewise. * ld-mips-elf/pic-and-nonpic-3b.gd: Likewise. * ld-mips-elf/pic-and-nonpic-5b.gd: Likewise. * ld-mips-elf/pic-and-nonpic-6.ld: Likewise. * ld-mips-elf/rel32-n32.d: Likewise. * ld-mips-elf/rel32-o32.d: Likewise. * ld-mips-elf/rel64.d: Likewise. * ld-mips-elf/tls-multi-got-1.r: Likewise. * ld-elf/group.ld: Discard .MIPS.abiflags and .gnu.attributes. * ld-elf/orphan-region.ld: Likewise. * ld-elf/orphan.ld: Likewise. * ld-mips-elf/compressed-plt-1.ld: Likewise. * ld-mips-elf/dyn-sec64.ld: Likewise. * ld-mips-elf/got-dump-1.ld: Likewise. * ld-mips-elf/got-dump-2.ld: Likewise. * ld-mips-elf/got-page-1.ld: Likewise. * ld-mips-elf/mips-dyn.ld: Likewise. * ld-mips-elf/mips-lib.ld: Likewise. * ld-mips-elf/pic-and-nonpic-3a.ld: Likewise. * ld-mips-elf/pic-and-nonpic-3b.ld: Likewise. * ld-mips-elf/pic-and-nonpic-4b.ld: Likewise. * ld-mips-elf/pic-and-nonpic-5b.ld: Likewise. * ld-mips-elf/region1.t: Likewise. * ld-mips-elf/stub-dynsym-1.ld: Likewise. * ld-mips-elf/tls-hidden3.ld: Likewise. * ld-mips-elf/vxworks1.ld: Likewise. * ld-scripts/overlay-size.t: Likewise. * ld-mips-elf/elf-rel-got-n32-embed.d: Remove .MIPS.abiflags from objects. * ld-mips-elf/elf-rel-got-n32.d: Likewise. * ld-mips-elf/elf-rel-got-n64-embed.d: Likewise. * ld-mips-elf/elf-rel-got-n64-linux.d: Likewise. * ld-mips-elf/elf-rel-got-n64.d: Likewise. * ld-mips-elf/elf-rel-xgot-n32.d: Likewise. * ld-mips-elf/elf-rel-xgot-n32-embed.d: Likewise. * ld-mips-elf/elf-rel-xgot-n64.d: Likewise. * ld-mips-elf/elf-rel-xgot-n64-linux.d: Likewise. * ld-mips-elf/elf-rel-xgot-n64-embed.d: Likewise. * ld-mips-elf/mips-elf.exp: Add new tests.
2014-07-27Add moxiebox targetAnthony Green5-0/+28
2014-07-17or1k: increase linux TEXT_START_ADDR to 0x2000Stefan Kristiansson2-0/+6
Override the default value of 0x0000 defined in TEXT_START_ADDR to avoid linux executables to be mapped at zero page. ld/ * emulparams/elf32or1k_linux.sh (TEXT_START_ADDR): Increase from 0x0 to first page boundary at 0x2000.
2014-07-16Properly match PLT entry against .got.plt relocationH.J. Lu9-5/+218
Relocations against .got.plt section may not be in the same order as entries in PLT section. It is incorrect to assume that the Ith reloction index against .got.plt section always maps to the (I + 1)th entry in PLT section. This patch matches the .got.plt relocation offset/index in PLT entry against the index in .got.plt relocation table. It only checks R_*_JUMP_SLOT and R_*_IRELATIVE relocations. It ignores R_*_TLS_DESC and R_*_TLSDESC relocations since they have different PLT entries. bfd/ PR binutils/17154 * elf32-i386.c (elf_i386_plt_sym_val): Only match R_*_JUMP_SLOT and R_*_IRELATIVE relocation offset with PLT entry. * elf64-x86-64.c (elf_x86_64_plt_sym_val): Likewise. (elf_x86_64_plt_sym_val_offset_plt_bnd): New. (elf_x86_64_get_synthetic_symtab): Use it. ld/testsuite/ PR binutils/17154 * ld-ifunc/pr17154-i386.d: New file. * ld-ifunc/pr17154-x86-64.d: Likewise. * ld-ifunc/pr17154-x86.s: Likewise. * ld-x86-64/bnd-ifunc-2.d: Likewise. * ld-x86-64/bnd-ifunc-2.s: Likewise. * ld-x86-64/mpx.exp: Run bnd-ifunc-2. * ld-x86-64/tlsdesc-nacl.pd: Updated. * ld-x86-64/tlsdesc.pd: Likewise.
2014-07-15Update elf_i386_compute_jump_table_sizeH.J. Lu4-0/+20
Commit e1f987424b7b3f5ac63a2a6ae044a202a44b8ff8 changed how next_tls_desc_index was set up. This patch updates elf_i386_compute_jump_table_size to use elf.srelplt->reloc_count instead of next_tls_desc_index. bfd/ PR ld/17057 * elf32-i386.c (elf_i386_compute_jump_table_size): Replace next_tls_desc_index with elf.srelplt->reloc_count. ld/testsuite/ PR ld/17057 * ld-i386/i386.exp: Run pr17057. * ld-i386/pr17057.d: New file. * ld-i386/pr17057.s: Likewise.
2014-07-15[AArch64] Fix ld testcase linker script glitch.Jiong Wang2-7/+11
Specify -T relocs.ld for emit-relocs-local-addend.d to be consistent will all other emit-relocs* testcases ld/testsuite/ * ld-aarch64/emit-relocs-local-addend.d: Use target linker script.
2014-07-10Fix xtensa ld segfault when linking linux modulesMax Filippov2-1/+7
is_inconsistent_linkonce_section makes an assumption that section name that starts with ".gnu.linkonce.prop." has one more dot in its suffix. However gas generates such section name by insertion of "prop." right after ".gnu.linkonce." part of the name of the original section. So, for section named ".gnu.linkonce.this_module" corresponding property section name does not satisfy the assumption. Such section names are common in linux modules. This bug was exposed by the patch "a35d5e8 Fix alignment for the first section frag on xtensa", that makes gas produce property section for each section that has ".align" directive in it. Use suffix that immediately follows ".gnu.linkonce.prop." when there are no more dots following it. 2014-07-10 Max Filippov <jcmvbkbc@gmail.com> ld/ * emultempl/xtensaelf.em (is_inconsistent_linkonce_section): correctly handle missing dot in section name after ".gnu.linkonce.prop.".
2014-07-10Fix tests when configured for arm-linux and arm-elfWill Newton27-214/+246
With this change all gas and most ld tests pass when configured for arm-linux. It doesn't look like these configurations have been tested in a long time but this attempts to stem the bit-rot slightly. gas/testsuite/ChangeLog: 2014-07-10 Will Newton <will.newton@linaro.org> * gas/arm/bl-local-2.d: Only enable the test on EABI and NaCl configurations. * gas/arm/bl-local-v4t.d: Likewise. * gas/arm/blx-local.d: Likewise. * gas/arm/branch-reloc.d: Likewise. ld/testsuite/ChangeLog: 2014-07-10 Will Newton <will.newton@linaro.org> * ld-arm/arm-elf.exp (armelftests_nonacl): Move Cortex-A8 fix tests, IFUNC tests and other EABI requiring tests to... (armeabitests_nonacl): ...here. * ld-arm/arm-app-abs32.d: Loosen regex for architecture type to allow test to pass on configurations without an attributes section. * ld-arm/arm-app.d: Likewise. * ld-arm/arm-lib-plt32.d: Likewise. * ld-arm/arm-lib.d: Likewise. * ld-arm/arm-static-app.d: Likewise. * ld-arm/armthumb-lib.d: Likewise. * ld-arm/cortex-a8-far.d: Likewise. * ld-arm/farcall-mixed-app.d: Likewise. * ld-arm/farcall-mixed-lib-v4t.d: Likewise. * ld-arm/farcall-mixed-lib.d: Likewise. * ld-arm/mixed-app-v5.d: Likewise. * ld-arm/mixed-app.d: Likewise. * ld-arm/mixed-lib.d: Likewise. * ld-arm/tls-app.d: Likewise. * ld-arm/tls-descrelax-be32.d: Likewise. * ld-arm/tls-descrelax.d: Likewise. * ld-arm/tls-descseq.d: Likewise. * ld-arm/tls-gdesc-got.d: Likewise. * ld-arm/tls-gdesc.d: Likewise. * ld-arm/tls-gdierelax.d: Likewise. * ld-arm/tls-gdierelax2.d: Likewise. * ld-arm/tls-gdlerelax.d: Likewise. * ld-arm/tls-lib-loc.d: Likewise. * ld-arm/tls-lib.d: Likewise. * ld-arm/tls-thumb1.d: Likewise.
2014-07-10ld/testsuite: Disable non-PIC shared library tests on ARMWill Newton2-1/+6
ARM doesn't support non-PIC shared libraries so don't run those tests. ld/testsuite/ChangeLog: 2014-07-10 Will Newton <will.newton@linaro.org> * ld-elfvers/vers.exp: Set pic to yes for ARM targets.
2014-07-08 * scripttempl/avr.sc: Remove KEEP for .data andDenis Chertykov2-5/+7
force .bss VMA to end of .data VMA.
2014-07-08ld/ARM: Increase maximum page size to 64kBWill Newton7-9/+23
Increase the maximum page size to 64kB and align the TEXT_START_ADDR to a 64kB boundary. This brings AArch32 in line with AArch64 and improves compatability under certain conditions. bfd/ChangeLog: 2014-07-08 Will Newton <will.newton@linaro.org> * elf32-arm.c (ELF_MAXPAGESIZE): Increase the default value to 64kB and remove custom setting for NaCl. ld/ChangeLog: 2014-07-08 Will Newton <will.newton@linaro.org> * emulparams/armelf_linux.sh (TEXT_START_ADDR): Increase alignment to 64kB boundary. ld/testsuite/ChangeLog: 2014-07-08 Will Newton <will.newton@linaro.org> * ld-arm/arm-lib.ld: Increase MAXPAGESIZE value to match bfd. * ld-arm/cortex-a8-fix-bl-rel-plt.d: Update offsets to take into account increased segment alignment. * ld-arm/ifunc-gdesc.r: Likewise. * ld-arm/tls-lib.d: Likewise.
2014-07-08Copy st_other for linker script symbol assignmentsAlan Modra4-0/+51
This fixes a problem seen on powerpc64le ELFv2 when creating a function symbol alias with ld --defsym. st_other needs to be copied from the source symbol to the alias in order to set up the local entry offset for the alias. I decided to make this change in the generic ELF code rather than in elf64-ppc.c since it looks like other targets that use st_other bits might benefit too. bfd/ * elflink.c (_bfd_elf_copy_link_hash_symbol_type): Copy st_other bits from source to dest. * linker.c (_bfd_generic_copy_link_hash_symbol_type): Update comment. * targets.c (struct bfd_target <_bfd_copy_link_hash_symbol_type>): Likewise. * bfd-in2.h: Regenerate. ld/testsuite/ * ld-powerpc/defsym.s, * ld-powerpc/defsym.d: New test. * ld-powerpc/powerpc.exp: Run it.
2014-07-08Enable elf_backend_rela_normal for AArch64Jiong Wang6-0/+82
If we are generating non-relocatable object and --emit-relocs specified, aarch64 ld is actually generating wrong addend for rela entry when relocate against local symbol. for example, for simple testcase foo.c === const char * const a = "foo"; const char * foo () { return a; } bar.c === const char * const b = "bar"; const char * bar () { return b; } aarch64-none-linux-gnu-ld --emit-relocs -o x.o foo.o bar.o aarch64-none-linux-gnu-readelf -r x.o ... R_AARCH64_ADR_PRE 0000000000400018 .rodata + 0 ... R_AARCH64_ADD_ABS 0000000000400018 .rodata + 0 ... R_AARCH64_ADR_PRE 0000000000400018 .rodata + 0 ... R_AARCH64_ADD_ABS 0000000000400018 .rodata + 0 while it should be: ... R_AARCH64_ADR_PRE 0000000000400018 .rodata + 0 ... R_AARCH64_ADD_ABS 0000000000400018 .rodata + 0 ... R_AARCH64_ADR_PRE 0000000000400018 .rodata + 10 ... R_AARCH64_ADD_ABS 0000000000400018 .rodata + 10 bfd generic code could actually handle this properly, but only when elf_backend_rela_normal set to '1'. this patch enable this and remove those target specific hack. bfd/ * elfnn-aarch64.c (elf_backend_rela_normal): Set to 1. (elfNN_aarch64_relocate_section): Remove duplicated addend adjustment when info->relocatable be true. ld/testsuite/ * ld-aarch64/emit-relocs-local-addend-bar.s: * New source file. * ld-aarch64/emit-relocs-local-addend-foo.s: * Likewise. * ld-aarch64/emit-relocs-local-addend.d: * New testcase. * ld-aarch64/local-addend-r.d: Likewise.
2014-07-08Run ar with --plugin for LTO 11 testAlan Modra2-1/+20
Objects built with -fno-fat-lto-objects (the default for gcc-4.9) have no normal symbols, except things like __gnu_lto_slim. These useless symbols are the ones put into the archive index, and of course nothing references them so no objects are extracted by the linker. Running ar with --plugin changes ar behaviour to put the lto symbols into the archive index. PR 17112 * ld-plugin/lto.exp: When building liblti-11.a, pass --plugin path_to_gcc/liblto_plugin.so to ar.
2014-07-07Reinstate compiler checkAlan Modra2-0/+9
* lib/ld-lib.exp (check_lto_shared_available): Reinstate compiler check here too.
2014-07-07This patch prevents a linker testsuite error if the checks are run with aNick Clifton2-0/+9
toolchain that just contains the binutils - ie without a compiler. * lib/ld-lib.exp (check_lto_available): Check that a compiler is available before testing for LTO support.
2014-07-07Ensure ld testsuite gcc -B options precede $CC -B optionsAlan Modra5-108/+93
Various ld-elf/shared.exp and ld-plugin/lto.exp tests simply appended the testsuite -B options intended to force gcc use the linker under test. This fails if $CC itself has -B options, as when setting CC to run gcc out of a build directory. Net result is that tests were run using the gcc build dir collect-ld. * config/default.exp: Don't make tmpdir/gas. Put as symlink into tmpdir/ld. (gcc_gas_flag, gcc_ld_flag): Delete. (gcc_B_opt, ld_L_opt): New globals. ld-elf/shared.exp: Remove all refs to gcc_gas_flag and gcc_ld_flag. ld-plugin/lto.exp: Likewise. lib/ld-lib.exp (run_host_cmd): Add gcc_B_opt and ld_L_opt here. (ld_simple_link): Remove -B handling now that this is done in run_host_cmd. Simplify. (default_ld_compile): Simplify. (check_lto_available): Use run_host_cmd_yesno. (check_lto_shared_available): Likewise.
2014-07-05Rid libdummy.a from lto.expAlan Modra3-66/+74
libdummy.a is used to make run_cc_link_tests compile objects and archive them. libdummy.a isn't used. What we're really doing is preventing a final link. So do that directly. * lib/ld-lib.exp (run_ld_link_tests): Stop after assembling objects if binfile is empty. (run_ld_link_exec_tests, run_cc_link_tests): Likewise. Tidy status checks. * ld-plugin/lto.exp: Don't use libdummy.a trick to compile objects. Instead use an empty output file.
2014-07-04Update "configure.in" in comments and docoAlan Modra3-2/+7
bfd/ * Makefile.am: Update "configure.in" comments. * PORTING: Likewise. * aoutx.h: Likewise. * configure.host: Likewise. * doc/bfdint.texi: Likewise. * targets.c: Likewise. * warning.m4: Likewise. * Makefile.in: Regenerate. gas/ * doc/internals.texi: Update "configure.in" comments. * acinclude.m4: Likewise. * config/tc-sparc.c: Likewise. ld/ * configure.ac: Update "configure.in" comments. * configure: Regenerate.
2014-07-04Rename configure.in to configure.acAlan Modra4-2/+8
bfd/ * configure.ac: Rename from configure.in. * Makefile.in: Regenerate. * config.in: Regenerate. * doc/Makefile.in: Regenerate. opcodes/ * configure.ac: Rename from configure.in. * Makefile.in: Regenerate. * config.in: Regenerate. binutils/ * configure.ac: Rename from configure.in. * Makefile.in: Regenerate. * config.in: Regenerate. * doc/Makefile.in: Regenerate. gas/ * configure.ac: Rename from configure.in. * Makefile.in: Regenerate. * config.in: Regenerate. * doc/Makefile.in: Regenerate. gprof/ * configure.ac: Rename from configure.in. * configure.ac: Rename from configure.in. * Makefile.in: Regenerate. * gconfig.in: Regenerate. ld/ * configure.ac: Rename from configure.in. * Makefile.in: Regenerate. * config.in: Regenerate.
2014-07-04Use modern AC_INIT in configure.inAlan Modra5-34/+41
This removes usage of the obsolete AC_INIT and AM_INIT_AUTOMAKE in all binutils configure.in files. The BFD version is now in bfd/version.m4 rather than bfd/configure.in, which allows automake to automatically track this dependency. bfd/ * version.m4: New file. * configure.in: Include version.m4. (AC_INIT): Update. * Makefile.am (RELEASE): Delete. (bfdver.h): Depend on development.sh, use instead of RELEASE. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. opcodes/ * configure.in: Include bfd/version.m4. (AC_INIT, AM_INIT_AUTOMAKE): Use modern form. (BFD_VERSION): Delete. * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in. * configure: Regenerate. * Makefile.in: Regenerate. binutils/ * configure.in: Include bfd/version.m4. (AC_INIT, AM_INIT_AUTOMAKE): Use modern form. (BFD_VERSION): Delete. * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in. * configure: Regenerate. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. gas/ * configure.in: Include bfd/version.m4. (AC_INIT, AM_INIT_AUTOMAKE): Use modern form. (BFD_VERSION): Delete. * configure.com: Get bfd version from bfd/version.m4. * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in. * configure: Regenerate. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. gprof/ * configure.in: Include bfd/version.m4. (AC_INIT, AM_INIT_AUTOMAKE): Use modern form. (BFD_VERSION): Delete. * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in. * configure: Regenerate. * Makefile.in: Regenerate. ld/ * configure.in: Include bfd/version.m4. (AC_INIT, AM_INIT_AUTOMAKE): Use modern form. (BFD_VERSION): Delete. * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in. * configure: Regenerate. * Makefile.in: Regenerate.
generated by cgit v1.1 at 2025-01-10 11:43:41 +0000