aboutsummaryrefslogtreecommitdiff
path: root/ld/testsuite
AgeCommit message (Collapse)AuthorFilesLines
2020-07-22ld, testsuite: do not run CTF tests at all on non-ELF for nowNick Alcock1-0/+5
Right now, the linker is not emitting CTF sections on (at least some) non-ELF platforms, because work similar to that done for ELF needs to be done to each platform in turn to emit linker-generated sections whose contents are programmatically derived. (Or something better needs to be done.) So, for now, the CTF tests will fail on non-ELF for lack of a .ctf section in the output: so skip the CTF tests there temporarily. (This is not the same as the permanent skip of the diags tests, which is done because the input for those is assembler that depends on the ELF syntax of pseudos like .section: this is only a temporary skip, until the linker grows support for CTF on more targets.) ld/ * testsuite/ld-ctf/ctf.exp: Skip on non-ELF for now.
2020-07-22ld, testsuite: only run CTF tests when ld and GCC support CTFNick Alcock2-0/+62
The CTF testsuite runs GCC to generate CTF that it knows matches the input .c files before doing a run_dump_test over it. So we need a GCC capable of doing that, and we need to always avoid running those tests if libctf was disabled because the linker will never be capable of it. ld/ * configure.ac (enable_libctf): Substitute it. * Makefile.am (enablings.exp): New. (EXTRA_DEJAGNU_SITE_CONFIG): Add it. (DISTCLEANFILES): Likewise. * Makefile.in: Regenerate. * configure: Likewise. * testsuite/lib/ld-lib.exp (compile_one_cc): New. (check_ctf_available): Likewise. (skip_ctf_tests): Likewise. * testsuite/ld-ctf/ctf.exp: Call skip_ctf_tests.
2020-07-22ld: new CTF testsuiteEgeyar Bagcioglu73-0/+1757
Uses the new cc option to run_dump_test to compile most tests from C code, ensuring that the types in the C code accurately describe what the .d file is testing. (Some tests, mostly those testing malformed CTF, run directly from .s, or include both .s and .c.) ld/ * testsuite/ld-ctf/ctf.exp: New file. * testsuite/ld-ctf/A-2.c: New file. * testsuite/ld-ctf/A.c: New file. * testsuite/ld-ctf/B-2.c: New file. * testsuite/ld-ctf/B.c: New file. * testsuite/ld-ctf/C-2.c: New file. * testsuite/ld-ctf/C.c: New file. * testsuite/ld-ctf/array-char.c: New file. * testsuite/ld-ctf/array-int.c: New file. * testsuite/ld-ctf/array.d: New file. * testsuite/ld-ctf/child-float.c: New file. * testsuite/ld-ctf/child-int.c: New file. * testsuite/ld-ctf/conflicting-cycle-1.B-1.d: New file. * testsuite/ld-ctf/conflicting-cycle-1.B-2.d: New file. * testsuite/ld-ctf/conflicting-cycle-1.parent.d: New file. * testsuite/ld-ctf/conflicting-cycle-2.A-1.d: New file. * testsuite/ld-ctf/conflicting-cycle-2.A-2.d: New file. * testsuite/ld-ctf/conflicting-cycle-2.parent.d: New file. * testsuite/ld-ctf/conflicting-cycle-3.C-1.d: New file. * testsuite/ld-ctf/conflicting-cycle-3.C-2.d: New file. * testsuite/ld-ctf/conflicting-cycle-3.parent.d: New file. * testsuite/ld-ctf/conflicting-enums.d: New file. * testsuite/ld-ctf/conflicting-typedefs.d: New file. * testsuite/ld-ctf/cross-tu-1.c: New file. * testsuite/ld-ctf/cross-tu-2.c: New file. * testsuite/ld-ctf/cross-tu-conflicting-2.c: New file. * testsuite/ld-ctf/cross-tu-cyclic-1.c: New file. * testsuite/ld-ctf/cross-tu-cyclic-2.c: New file. * testsuite/ld-ctf/cross-tu-cyclic-3.c: New file. * testsuite/ld-ctf/cross-tu-cyclic-4.c: New file. * testsuite/ld-ctf/cross-tu-cyclic-conflicting.d: New file. * testsuite/ld-ctf/cross-tu-cyclic-nonconflicting.d: New file. * testsuite/ld-ctf/cross-tu-into-cycle.d: New file. * testsuite/ld-ctf/cross-tu-noncyclic.d: New file. * testsuite/ld-ctf/cycle-1.c: New file. * testsuite/ld-ctf/cycle-1.d: New file. * testsuite/ld-ctf/cycle-2.A.d: New file. * testsuite/ld-ctf/cycle-2.B.d: New file. * testsuite/ld-ctf/cycle-2.C.d: New file. * testsuite/ld-ctf/diag-ctf-version-0.d: New file. * testsuite/ld-ctf/diag-ctf-version-0.s: New file. * testsuite/ld-ctf/diag-ctf-version-2-unsupported-feature.d: New file. * testsuite/ld-ctf/diag-ctf-version-2-unsupported-feature.s: New file. * testsuite/ld-ctf/diag-ctf-version-f.d: New file. * testsuite/ld-ctf/diag-ctf-version-f.s: New file. * testsuite/ld-ctf/diag-cttname-invalid.d: New file. * testsuite/ld-ctf/diag-cttname-invalid.s: New file. * testsuite/ld-ctf/diag-cttname-null.d: New file. * testsuite/ld-ctf/diag-cttname-null.s: New file. * testsuite/ld-ctf/diag-cuname.d: New file. * testsuite/ld-ctf/diag-cuname.s: New file. * testsuite/ld-ctf/diag-decompression-failure.d: New file. * testsuite/ld-ctf/diag-decompression-failure.s: New file. * testsuite/ld-ctf/diag-parlabel.d: New file. * testsuite/ld-ctf/diag-parlabel.s: New file. * testsuite/ld-ctf/diag-parname.d: New file. * testsuite/ld-ctf/diag-parname.s: New file. * testsuite/ld-ctf/diag-unsupported-flag.d: New file. * testsuite/ld-ctf/diag-unsupported-flag.s: New file. * testsuite/ld-ctf/diag-wrong-magic-number-mixed.d: New file. * testsuite/ld-ctf/diag-wrong-magic-number.d: New file. * testsuite/ld-ctf/diag-wrong-magic-number.s: New file. * testsuite/ld-ctf/enum-2.c: New file. * testsuite/ld-ctf/enum.c: New file. * testsuite/ld-ctf/function.c: New file. * testsuite/ld-ctf/function.d: New file. * testsuite/ld-ctf/slice.c: New file. * testsuite/ld-ctf/slice.d: New file. * testsuite/ld-ctf/super-sub-cycles.c: New file. * testsuite/ld-ctf/super-sub-cycles.d: New file. * testsuite/ld-ctf/typedef-int.c: New file. * testsuite/ld-ctf/typedef-long.c: New file. * testsuite/ld-ctf/union-1.c: New file.
2020-07-22ld: Properly override the IR definitionH.J. Lu8-0/+128
We change the previous definition in the IR object to undefweak only after all LTO symbols have been read. include/ PR ld/26262 PR ld/26267 * bfdlink.h (bfd_link_info): Add lto_all_symbols_read. ld/ PR ld/26262 PR ld/26267 * ldlang.c (lang_process): Set lto_all_symbols_read after all LTO IR symbols have been read. * plugin.c (plugin_notice): Override the IR definition only if all LTO IR symbols have been read or the new definition is non-weak and the the IR definition is weak * testsuite/ld-plugin/lto.exp: Run PR ld/26262 and ld/26267 tests. * testsuite/ld-plugin/pr26262a.c: New file. * testsuite/ld-plugin/pr26262b.c: Likewise. * testsuite/ld-plugin/pr26262c.c: Likewise. * testsuite/ld-plugin/pr26267.err: Likewise. * testsuite/ld-plugin/pr26267a.c: Likewise. * testsuite/ld-plugin/pr26267b.c: Likewise. * testsuite/ld-plugin/pr26267c.c: Likewise.
2020-07-20Fix problem running a few PowerPC linker tests when the .data section is ↵Nick Clifton1-3/+3
retained. * testsuite/ld-powerpc/powerpc.exp (ppcelftests): Use section name .PPC.EMB.apuinfo instead of section number 2 in apuinfo tests.
2020-07-20PR26265, Spurious 'gc-sections requires ... when --init or --finiAlan Modra1-1/+1
bfd/ * elflink.c (_bfd_elf_gc_keep): Use bfd_is_const_section. ld/ PR 26265 * ldlang.c (undef_from_cmdline): Delete. (ldlang_add_undef): Mark "cmdline" param unused. (lang_end): Traverse gc_sym_list to determine whether a symbol root has been specified. Update error message. * testsuite/ld-gc/noent.d: Adjust for changed error message.
2020-07-20x86: Update PR gas/26263 linker testsH.J. Lu3-9/+9
Update and run PR gas/26263 linker tests for all x86 ELF targets to accept any program header layout. PR gas/26263 * testsuite/ld-i386/pr26263.d: Updated. * testsuite/ld-x86-64/pr26263.d: Likewise. * testsuite/ld-x86-64/x86-64.exp: Run gas/26263 test for all ELF targets.
2020-07-19x86: Change PLT32 reloc against section to PC32H.J. Lu5-0/+47
Commit 292676c1 resolved PLT32 reloc aganst local symbol to section. Since PLT32 relocation must be against symbols, turn such PLT32 relocation into PC32 relocation. gas/ PR gas/26263 * config/tc-i386.c (i386_validate_fix): Change PLT32 reloc against section to PC32 reloc. * testsuite/gas/i386/relax-5.d: Updated. * testsuite/gas/i386/x86-64-relax-4.d: Likewise. ld/ PR gas/26263 * testsuite/ld-i386/i386.exp: Run PR gas/26263 test. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-i386/pr26263.d: New file. * testsuite/ld-x86-64/pr26263.d: Likewise. * testsuite/ld-x86-64/pr26263.s: Likewise.
2020-07-19ld: optionally emit _etext last, before .dataHans-Peter Nilsson1-1/+1
So, here's my suggestion for making _init .. __etext cover .text + .rodata (including things like the read-only exception tables) for elf64mmix. A quick web search gives that __etext (and friends) isn't well defined, so each target can interpret the "end of text segment" to their own liking. It seems likely this change is also a better fit than the default for other ports, at least those with .rodata after .text in the same segment. The presence of a separate rodata-segment is optional (and not true for elf64mmix). This is reflected in the name as SEPARATE_TEXT / SEPARATE_CODE isn't considered, to keep it simple; each target has to make sure their settings of variables make sense. ld: * scripttempl/elf.sc (ETEXT_LAST_IN_RODATA_SEGMENT): New variable. * emulparams/elf64mmix.sh (ETEXT_LAST_IN_RODATA_SEGMENT): Define. * testsuite/ld-mmix/sec-1.d: Adjust.
2020-07-19Power10 stub selectionAlan Modra8-12/+222
This patch better supports mixing of power10 and non-power10 code, as might be seen in a cpu-optimized library using ifuncs to select functions optimized for a given cpu. Using -Wl,--no-power10-stubs isn't that good in this situation since non-power10 notoc stubs are slower and larger than the power10 variants, which you'd like to use on power10 code paths. With this change, power10 pc-relative code that makes calls marked @notoc uses power10 stubs if stubs are necessary, and other calls use non-power10 instructions in stubs. This will mean that if gcc is generating code for -mcpu=power10 but with pc-rel disabled then you'll get the older stubs even on power10 (unless you force with -Wl,--power10-stubs). That shouldn't be too big a problem: stubs that use r2 are reasonable. It's just the ones that set up addressing using "mflr 12; bcl 20,31,.+4; mflr 11; mtlr 12" that should be avoided if possible. bfd/ * elf64-ppc.c (struct ppc_link_hash_table): Add has_power10_relocs. (select_alt_stub): New function. (ppc_get_stub_entry): Use it here. (ppc64_elf_check_relocs): Set had_power10_relocs rather than power10_stubs. (ppc64_elf_size_stubs): Clear power10_stubs here instead. Don't merge notoc stubs with other varieties when power10_stubs is "auto". Instead dup the stub hash table entry. (plt_stub_size, ppc_build_one_stub, ppc_size_one_stub): Adjust tests of power10_stubs. ld/ * emultempl/ppc64elf.em (power10-stubs): Accept optional "auto" arg. * ld.texi (power10-stubs): Update. * testsuite/ld-powerpc/callstub-1.d: Force --power10-stubs. * testsuite/ld-powerpc/callstub-2.d: Relax branch offset comparison. * testsuite/ld-powerpc/callstub-4.d: New test. * testsuite/ld-powerpc/notoc.d: Force --no-power10-stubs. * testsuite/ld-powerpc/notoc3.d, * testsuite/ld-powerpc/notoc3.s, * testsuite/ld-powerpc/notoc3.wf: New test. * testsuite/ld-powerpc/powerpc.exp: Run new tests. Pass --no-power10-stubs for notoc link.
2020-07-17mmix ld: move .init (and _init) first.Hans-Peter Nilsson1-6/+6
This both makes the section layout more similar to that of the general default for ELF and fixes (makes true) an assumption that code and rodata is located between _init and __etext, in libgcc/config/mmix/crti.S. Sadly, that's not actually true for ELF (generally and for elf64mmix), where exception-tables and .rodata is after _etext; I'm pondering what to do about that. The original mmix simulator behavior is that memory magically appears on access, initialized with 0, which is not preferable when chasing bugs by throwing code the size of the gcc test-suite to the simulator. The code in crti.S compatibly enables simulator machinery to identify undefined memory and instead stopping the simulator with an error (going to interactive mode for interactive runs). See http://gcc.gnu.org/legacy-ml/gcc-patches/2012-10/msg01871.html for more, including the mmix-sim.ch "patch file". This fixes only one error in the gcc testsuite, gcc.c-torture/execute/pr20621-1.c with LTO, where for some reason gcc/lto chooses to move (writable) data that is only used to read 0 to .rodata. An access (sufficiently far inside a block) in an unregistered place is flagged as an invalid access. The bpo-9m test that I had to adjust, actually exposes a wart: mmo does not have the notion of symbol types (or sections) and the test-case now has leading zeros at "Main" eventually leading to it being misdiagnosed as being outside .text and .data, thus here mapped to BFD as an absolute symbol. The test is not intended to check the mmo symbol-type machinery, so I'm just tweaking it to be symbol-type-neutral for "Main". Since you have to jump through hoops to see the problem, I don't think this commit is worth putting on the 2.35-branch. ld: * scripttempt/mmo.sc: Move .init first in .text output section. * testsuite/ld-mmix/bpo-9m.d: Adjust accordingly.
2020-07-15x86: avoid attaching suffixes to unambiguous insnsJan Beulich121-584/+584
"Unambiguous" is is in particular taking as reference the assembler, which also accepts certain insns - despite them allowing for varying operand size, and hence in principle being ambiguous - without any suffix. For example, from the very beginning of the life of x86-64 I had trouble understanding why a plain and simple RET had to be printed as RETQ. In case someone really used the 16-bit form, RETW disambiguates the two quite fine.
2020-07-15mmix bfd: fix bfd_assert for R_MMIX_PUSHJ_STUBBABLE against undef'd symbolHans-Peter Nilsson4-4/+4
Spotted when inspecting gcc testsuite logs, but this already is covered by the ld-mmix testsuite, it's just that the assert is ignored since the regexp match is for a substring and not anchored. With the anchors added but not the bugfix, the ld.log shows that the asserts cause a non-match as intended: Executing on host: sh -c {./ld-new -LX/src/ld/testsuite/ld-mmix -m elf64mmix -o tmpdir/dump tmpdir/undef-2.o tmpdir/start.o 2>&1} /dev/null dump.tmp (timeout = 300) ./ld-new: BFD (GNU Binutils) 2.34.50.20200629 assertion fail X/src/bfd/elf64-mmix.c:2845 ./ld-new: BFD (GNU Binutils) 2.34.50.20200629 assertion fail X/src/bfd/elf64-mmix.c:2845 ./ld-new: BFD (GNU Binutils) 2.34.50.20200629 assertion fail X/src/bfd/elf64-mmix.c:2845 ./ld-new: tmpdir/undef-2.o:(.text+0x0): undefined reference to `undefd' failed with: <./ld-new: BFD (GNU Binutils) 2.34.50.20200629 assertion fail X/src/bfd/elf64-mmix.c:2845 ./ld-new: BFD (GNU Binutils) 2.34.50.20200629 assertion fail X/src/bfd/elf64-mmix.c:2845 ./ld-new: BFD (GNU Binutils) 2.34.50.20200629 assertion fail X/src/bfd/elf64-mmix.c:2845 ./ld-new: tmpdir/undef-2.o:(.text+0x0): undefined reference to `undefd'>, expected: <\A[^\n\r]*undefined reference to `undefd'\Z> FAIL: ld-mmix/undef-2 Gone with the fix of course, leaving just the intended "undefined reference" like. I'm not going to add anchors manually for all the "error:" strings in the test-suite, not even in the mmix parts. Sorry, but I'll just do it for *these* specific undefined-reference tests. Just a thought: maybe the run_dump_test "error:" string should *automatically* get anchor marks prepended and appended for a single line match as in the patch, "\A[^\n\r]*" prepended and \Z appended unless either anchor mark or \r or \n is present in the regexp? Committed. bfd: * elf64-mmix.c (mmix_elf_relax_section): Improve accounting for R_MMIX_PUSHJ_STUBBABLE relocs against undefined symbols. ld/testsuite: * testsuite/ld-mmix/undef-1.d, testsuite/ld-mmix/undef-1m.d, testsuite/ld-mmix/undef-2.d, testsuite/ld-mmix/undef-2m.d: Add start- and end-anchors to error-string to match just a single-line error-message.
2020-07-13x86_64-cygwin testsAlan Modra7-20/+18
Tests just having "xfail: x86_64-*-cygwin" aren't good, since presumably if a test fails on x86_64-cygwin then it also fails on x86_64-*-pe* and x86_64-*-mingw*. binutils/ * testsuite/lib/binutils-common.exp (is_pecoff_format): Accept optional machine-os arg. ld/ * testsuite/ld-scripts/default-script1.d: Don't skip, xfail using is_pecoff_format. * testsuite/ld-scripts/default-script2.d: Likewise. * testsuite/ld-scripts/default-script3.d: Likewise. * testsuite/ld-scripts/default-script4.d: Likewise. * testsuite/ld-scripts/pr20302.d: Remove x86_64-*-cygwin from notarget. * testsuite/ld-scripts/provide-6.d: Remove x86_64-*-cygwin from xfail. * testsuite/ld-scripts/provide-8.d: Likewise.
2020-07-10PowerPC64 ld --no-power10-stubsAlan Modra2-0/+39
Needed for libraries that use ifuncs or other means to support cpu-optimized versions of functions, some power10, some not, and those functions make calls using linkage stubs. bfd/ * elf64-ppc.h (struct ppc64_elf_params): Add power10_stubs. * elf64-ppc.c (struct ppc_link_hash_table): Delete power10_stubs. (ppc64_elf_check_relocs): Adjust setting of power10_stubs. (plt_stub_size, ppc_build_one_stub, ppc_size_one_stub): Adjust uses of power10_stubs. ld/ * emultempl/ppc64elf.em (params): Init new field. (enum ppc64_opt): Add OPTION_POWER10_STUBS and OPTION_NO_POWER10_STUBS. (PARSE_AND_LIST_LONGOPTS): Support --power10-stubs and --no-power10-stubs. (PARSE_AND_LIST_OPTIONS, PARSE_AND_LIST_ARGS_CASES): Likewise. * testsuite/ld-powerpc/callstub-3.d: New test. * testsuite/ld-powerpc/powerpc.exp: Run it.
2020-07-09powerpc garbage collect testAlan Modra1-6/+3
ld's garbage collection test on powerpc64 catered for old compilers (pre -mcmodel=medium support), setting options that caused the test to fail. Which meant the test wasn't really testing anything. Get rid of that old compiler support, and avoid -fPIE fails on ppc32. * testsuite/ld-gc/gc.exp: Don't set -mminimal-toc for powerpc64, and remove powerpc64 xfail. Use -fno-PIE for ppc32.
2020-07-09pr18841 tests on powerpc64Alan Modra1-9/+9
The PR18841 test does cross-module calls from within an ifunc resolver, which is nasty, and not supported in general since the called function may not be relocated. In this case the called function (zoo) is just a stub so doesn't need relocating, but on ppc64 the function descriptor for zoo in the executable won't be relocated at the time the shared library ifunc resolver runs. That means the test will fail if your compiler generates PIEs by default. PR 18841 * testsuite/ld-ifunc/ifunc.exp: Run pr18841 tests non-pie.
2020-07-08powerpc-aix5.2 testsAlan Modra86-595/+889
git commit bbd0c8e20472 broke many of these tests, and there have been other changes that caused failures too. * testsuite/lib/ld-lib.exp (ar_simple_create): Pass options before ar command. * testsuite/ld-powerpc/aix52.exp: Run for rs6000-aix5.2. Update match files. * testsuite/ld-powerpc/aix-abs-branch-1.dd: Update. * testsuite/ld-powerpc/aix-core-sec-1.hd: Update. * testsuite/ld-powerpc/aix-gc-1-32.dd: Update. * testsuite/ld-powerpc/aix-gc-1-64.dd: Update. * testsuite/ld-powerpc/aix-glink-1-32.dd: Update. * testsuite/ld-powerpc/aix-glink-1-64.dd: Update. * testsuite/ld-powerpc/aix-glink-2-32.dd: Update. * testsuite/ld-powerpc/aix-glink-2-64.dd: Update. * testsuite/ld-powerpc/aix-no-dup-syms-1-rel.rd: Update. * testsuite/ld-powerpc/aix-ref-1-32.od: Update. * testsuite/ld-powerpc/aix-ref-1-64.od: Update. * testsuite/ld-powerpc/aix-toc-1-32.dd: Update. * testsuite/ld-powerpc/aix-toc-1-64.dd: Update. * testsuite/ld-powerpc/aix-weak-3-32.dd: Update. * testsuite/ld-powerpc/aix-weak-3-64.dd: Update. * testsuite/ld-powerpc/aix-abs-branch-1.nd: Delete, replace with.. * testsuite/ld-powerpc/aix-abs-branch-1-32.nd, * testsuite/ld-powerpc/aix-abs-branch-1-64.nd: ..these new files. * testsuite/ld-powerpc/aix-abs-reloc-1.nd: Delete, replace with.. * testsuite/ld-powerpc/aix-abs-reloc-1-32.nd, * testsuite/ld-powerpc/aix-abs-reloc-1-64.nd: ..these new files. * testsuite/ld-powerpc/aix-abs-reloc-1.od: Delete, replace with.. * testsuite/ld-powerpc/aix-abs-reloc-1-32.od, * testsuite/ld-powerpc/aix-abs-reloc-1-64.od: ..these new files. * testsuite/ld-powerpc/aix-export-1-all.dd: Delete, replace with.. * testsuite/ld-powerpc/aix-export-1-all-32.dd, * testsuite/ld-powerpc/aix-export-1-all-64.dd: ..these new files. * testsuite/ld-powerpc/aix-export-1-full.dd: Delete, replace with.. * testsuite/ld-powerpc/aix-export-1-full-32.dd, * testsuite/ld-powerpc/aix-export-1-full-64.dd: ..these new files. * testsuite/ld-powerpc/aix-export-2.nd: Delete, replace with.. * testsuite/ld-powerpc/aix-export-2-32.nd, * testsuite/ld-powerpc/aix-export-2-64.nd: ..these new files. * testsuite/ld-powerpc/aix-gc-1.nd: Delete, replace with.. * testsuite/ld-powerpc/aix-gc-1-32.nd, * testsuite/ld-powerpc/aix-gc-1-64.nd: ..these new files. * testsuite/ld-powerpc/aix-glink-3.dd: Delete, replace with.. * testsuite/ld-powerpc/aix-glink-3-32.dd, * testsuite/ld-powerpc/aix-glink-3-64.dd: ..these new files. * testsuite/ld-powerpc/aix-lineno-1a.dd: Delete, replace with.. * testsuite/ld-powerpc/aix-lineno-1a-32.dd, * testsuite/ld-powerpc/aix-lineno-1a-64.dd: ..these new files. * testsuite/ld-powerpc/aix-lineno-1a.nd: Delete, replace with.. * testsuite/ld-powerpc/aix-lineno-1a-32.nd, * testsuite/ld-powerpc/aix-lineno-1a-64.nd: ..these new files. * testsuite/ld-powerpc/aix-lineno-1b.dd: Delete, replace with.. * testsuite/ld-powerpc/aix-lineno-1b-32.dd, * testsuite/ld-powerpc/aix-lineno-1b-64.dd: ..these new files. * testsuite/ld-powerpc/aix-lineno-1b.nd: Delete, replace with.. * testsuite/ld-powerpc/aix-lineno-1b-32.nd, * testsuite/ld-powerpc/aix-lineno-1b-64.nd: ..these new files. * testsuite/ld-powerpc/aix-no-dup-syms-1-dso.dnd: Delete, replace with.. * testsuite/ld-powerpc/aix-no-dup-syms-1-dso-32.dnd, * testsuite/ld-powerpc/aix-no-dup-syms-1-dso-64.dnd: ..these new files. * testsuite/ld-powerpc/aix-no-dup-syms-1-dso.drd: Delete, replace with.. * testsuite/ld-powerpc/aix-no-dup-syms-1-dso-32.drd, * testsuite/ld-powerpc/aix-no-dup-syms-1-dso-64.drd: ..these new files. * testsuite/ld-powerpc/aix-no-dup-syms-1-dso.nd: Delete, replace with.. * testsuite/ld-powerpc/aix-no-dup-syms-1-dso-32.nd, * testsuite/ld-powerpc/aix-no-dup-syms-1-dso-64.nd: ..these new files. * testsuite/ld-powerpc/aix-no-dup-syms-1-dso.rd: Delete, replace with.. * testsuite/ld-powerpc/aix-no-dup-syms-1-dso-32.rd, * testsuite/ld-powerpc/aix-no-dup-syms-1-dso-64.rd: ..these new files. * testsuite/ld-powerpc/aix-weak-1-dso.dnd: Delete, replace with.. * testsuite/ld-powerpc/aix-weak-1-dso-32.dnd, * testsuite/ld-powerpc/aix-weak-1-dso-64.dnd: ..these new files. * testsuite/ld-powerpc/aix-weak-1-dso.hd: Delete, replace with.. * testsuite/ld-powerpc/aix-weak-1-dso-32.hd, * testsuite/ld-powerpc/aix-weak-1-dso-64.hd: ..these new files. * testsuite/ld-powerpc/aix-weak-1-dso.nd: Delete, replace with.. * testsuite/ld-powerpc/aix-weak-1-dso-32.nd, * testsuite/ld-powerpc/aix-weak-1-dso-64.nd: ..these new files. * testsuite/ld-powerpc/aix-weak-1-gcdso.dnd: Delete, replace with.. * testsuite/ld-powerpc/aix-weak-1-gcdso-32.dnd, * testsuite/ld-powerpc/aix-weak-1-gcdso-64.dnd: ..these new files. * testsuite/ld-powerpc/aix-weak-1-gcdso.hd: Delete, replace with.. * testsuite/ld-powerpc/aix-weak-1-gcdso-32.hd, * testsuite/ld-powerpc/aix-weak-1-gcdso-64.hd: ..these new files. * testsuite/ld-powerpc/aix-weak-1-gcdso.nd: Delete, replace with.. * testsuite/ld-powerpc/aix-weak-1-gcdso-32.nd, * testsuite/ld-powerpc/aix-weak-1-gcdso-64.nd: ..these new files. * testsuite/ld-powerpc/aix-weak-2a.nd: Delete, replace with.. * testsuite/ld-powerpc/aix-weak-2a-32.nd, * testsuite/ld-powerpc/aix-weak-2a-64.nd: ..these new files. * testsuite/ld-powerpc/aix-weak-2b.nd: Delete, replace with.. * testsuite/ld-powerpc/aix-weak-2b-32.nd, * testsuite/ld-powerpc/aix-weak-2b-64.nd: ..these new files. * testsuite/ld-powerpc/aix-weak-2c.nd: Delete, replace with.. * testsuite/ld-powerpc/aix-weak-2c-32.nd, * testsuite/ld-powerpc/aix-weak-2c-64.nd: ..these new files. * testsuite/ld-powerpc/aix-weak-2c.od: Delete, replace with.. * testsuite/ld-powerpc/aix-weak-2c-32.od, * testsuite/ld-powerpc/aix-weak-2c-64.od: ..these new files.
2020-07-07Re: Use is_xcoff_format in ld testsuiteAlan Modra1-1/+2
git commit 7193487fa8 took h8300 out of the notarget list, resulting in h8300-elf +FAIL: ld-scripts/section-match-1 h8300-linux +FAIL: ld-scripts/section-match-1 * testsuite/ld-scripts/section-match-1.d: xfail h8300.
2020-07-07XCOFF ld testsuite fixesAlan Modra52-59/+105
* testsuite/ld-scripts/align.exp: Don't exclude xcoff. Pass -bnogc ld option for xcoff. * testsuite/ld-scripts/provide.exp: Likewise. * testsuite/ld-scripts/data.exp: Pass -bnogc ld option for xcoff. * testsuite/ld-scripts/default-script.exp: Likewise. * testsuite/ld-scripts/defined.exp: Likewise. * testsuite/ld-scripts/empty-address.exp: Likewise. * testsuite/ld-scripts/expr.exp: Likewise. * testsuite/ld-scripts/include.exp: Likewise. * testsuite/ld-scripts/script.exp: Likewise. * testsuite/ld-scripts/assign-loc.d: Don't exclude xcoff. * testsuite/ld-scripts/defined3.d: Likewise. * testsuite/ld-scripts/defined4.d: Likewise. * testsuite/ld-scripts/pr18963.d: Likewise. * testsuite/ld-scripts/sane1.d: Likewise. * testsuite/ld-scripts/segment-start.d: Likewise. * testsuite/ld-scripts/include-1.d: Likewise, and relax text vma. * testsuite/ld-scripts/defined5.d: Update xfail and comment. * testsuite/ld-scripts/defined5.s: Tweak "defined" to be at non-zero section offset. * testsuite/ld-scripts/fill16.d: xfail for xcoff. * testsuite/ld-scripts/provide-2.d: Accept more symbols. * testsuite/ld-scripts/provide-4.d: Likewise. * testsuite/ld-scripts/provide-5.d: Likewise. * testsuite/ld-scripts/provide-6.d: Likewise. * testsuite/ld-scripts/provide-7.d: Likewise. * testsuite/ld-scripts/align.t: Accept xcoff mapped .text and .data. * testsuite/ld-scripts/defined3.t: Likewise. * testsuite/ld-scripts/defined4.t: Likewise. * testsuite/ld-scripts/defined5.t: Likewise. * testsuite/ld-scripts/fill.t: Likewise. * testsuite/ld-scripts/include-subdata.t: Likewise. * testsuite/ld-scripts/provide-1.t: Likewise. * testsuite/ld-scripts/provide-2.t: Likewise. * testsuite/ld-scripts/provide-3.t: Likewise. * testsuite/ld-scripts/provide-4.t: Likewise. * testsuite/ld-scripts/provide-5.t: Likewise. * testsuite/ld-scripts/provide-6.t: Likewise. * testsuite/ld-scripts/provide-7.t: Likewise. * testsuite/ld-scripts/provide-8.t: Likewise. * testsuite/ld-scripts/assign-loc.t: Add required xcoff sections. * testsuite/ld-scripts/sizeof.t: Likewise. * testsuite/ld-scripts/align2.t: Likewise, and mapped sections. * testsuite/ld-scripts/align5.t: Likewise. * testsuite/ld-scripts/default-script.t: Likewise. * testsuite/ld-scripts/empty-address-1.t: Likewise. * testsuite/ld-scripts/empty-address-2a.t: Likewise. * testsuite/ld-scripts/empty-address-2b.t: Likewise. * testsuite/ld-scripts/empty-address-3a.t: Likewise. * testsuite/ld-scripts/empty-address-3b.t: Likewise. * testsuite/ld-scripts/empty-address-3c.t: Likewise. * testsuite/ld-scripts/include-sections.t: Likewise. * testsuite/ld-scripts/pr14962.t: Likewise. * testsuite/ld-scripts/sane1.t: Likewise.
2020-07-07Use is_pecoff_format in ld testsuiteAlan Modra8-25/+32
--image-base 0 is not just for x86_64 mingw. This patch fixes that, and a case where a changed LDFLAGS leaked out of one script to the next. * testsuite/ld-scripts/align.exp: Use is_pecoff_format. * testsuite/ld-scripts/defined.exp: Likewise. * testsuite/ld-scripts/provide.exp: Likewise. * testsuite/ld-scripts/weak.exp: Likewise. * testsuite/ld-scripts/empty-address.exp: Likewise. Reset LDFLAGS on exit. * testsuite/ld-scripts/expr.exp: Set LDFLAGS earlier, and with --image-base for PE. * testsuite/ld-scripts/include.exp: Set LDFLAGS for PE. * testsuite/ld-scripts/script.exp: Use is_pecoff_format, and set LDFLAGS as well as flags.
2020-07-07Use is_xcoff_format in ld testsuiteAlan Modra10-116/+50
* testsuite/ld-checks/checks.exp: Use is_xcoff_format. * testsuite/ld-powerpc/powerpc.exp: Likewise. * testsuite/ld-scripts/print-memory-usage.exp: Likewise. * testsuite/ld-srec/srec.exp: Likewise. * testsuite/ld-undefined/require-defined.exp: Likewise. * testsuite/ld-scripts/expr2.d: Likewise. * testsuite/ld-scripts/section-match-1.d: Only run for ELF. * testsuite/ld-elfvers/vers.exp: Delete dead code. * testsuite/ld-elfvsb/elfvsb.exp: Likewise. * testsuite/ld-elfweak/elfweak.exp: Likewise.
2020-07-07sh vxworks testsAlan Modra2-2/+2
These tests were failing only due to not being updated for readelf output changes. * testsuite/ld-sh/vxworks1-lib.rd: Update expected output. * testsuite/ld-sh/vxworks4.d: Likewise.
2020-07-03Re: Change readelf's display of symbol namesAlan Modra8-60/+60
Fixes some fallout from git commit 0942c7ab94e5. PR 26028 gas/ * testsuite/gas/ia64/unwind-ilp32.d: Add -T to readelf options. gold/ * testsuite/Makefile.am (file_in_many_sections.stdout): Add -W to readelf options. * testsuite/Makefile.in: Regenerate. ld/ * testsuite/ld-arm/arm-elf.exp (vxworks1): Pass --wide to readelf when dumping relocs. * testsuite/ld-i386/i386.exp (vxworks1): Likewise. * testsuite/ld-sh/sh-vxworks.exp (vxworks1): Likewise. * testsuite/ld-sparc/sparc.exp (vxworks1): Likewise. * testsuite/ld-arm/vxworks1.rd: Adjust to suit. * testsuite/ld-i386/vxworks1.rd: Adjust. * testsuite/ld-sh/vxworks1.rd: Adjust. * testsuite/ld-sparc/vxworks1.rd: Adjust.
2020-07-02Change readelf's display of symbol names (when not in --wide mode) so that ↵Nick Clifton7-12/+12
if they are going to be truncated then "[...]" is displayed at the end. Add a comment line option to disable this enhancement and restore the old behaviour. PR 26028 binutils* readelf.c (print_symbol): Handle truncation of symbol names. (options): Add -T/--silent-truncation option. (parse_args): Handle the option. (print_dynamic_symbol): Correct calculation of width available to display symbol name. * doc/binutils.texi: Document the -T option to readelf. * NEWS: Mention the new feature. gas * testsuite/gas/ia64/group-2.d: Add -T option to readelf command line. * testsuite/gas/ia64/unwind.d: Likewise. * testsuite/gas/mmix/bspec-1.d: Likewise. * testsuite/gas/mmix/bspec-2.d: Likewise. * testsuite/gas/mmix/comment-1.d: Likewise. * testsuite/gas/tic6x/scomm-directive-4.d: Likewise. ld * testsuite/ld-powerpc/powerpc.exp: Add -T option to readelf command line when running some tests. * testsuite/ld-arm/arm-elf.exp: Likewise. * testsuite/ld-mips-elf/mips-elf.exp: Likewise. * testsuite/ld-mmix/local1.d: Likewise. * testsuite/ld-mmix/local3.d: Likewise. * testsuite/ld-mmix/local5.d: Likewise. * testsuite/ld-mmix/local7.d: Likewise. * testsuite/ld-powerpc/powerpc.exp: Likewise.
2020-06-30Remove x86 NaCl target supportH.J. Lu172-3470/+52
NaCl has been deprecated: https://developer.chrome.com/native-client/migration and NaCl will completely disappear in 2021: https://lists.llvm.org/pipermail/llvm-dev/2020-April/141107.html Remove x86 NaCl target support from bfd, binutils, gas and ld. bfd/ * archures.c (bfd_mach_i386_nacl): Removed. (bfd_mach_i386_i386_nacl): Likewise. (bfd_mach_x86_64_nacl): Likewise. (bfd_mach_x64_32_nacl): Likewise. * config.bfd: Remove *-*-nacl* targets. * configure.ac: Remove x86 NaCl target vectors. * cpu-i386.c (bfd_arch_i386_onebyte_nop_fill): Removed. (bfd_x64_32_nacl_arch): Likewise. (bfd_x86_64_nacl_arch): Likewise. (bfd_i386_nacl_arch): Likewise. (bfd_x64_32_arch_intel_syntax): Updated. * elf32-i386.c: Don't include "elf-nacl.h". (elf_i386_nacl_plt): Removed. (elf_i386_nacl_plt0_entry): Likewise. (elf_i386_nacl_plt_entry): Likewise. (elf_i386_nacl_pic_plt0_entry): Likewise. (elf_i386_nacl_pic_plt_entry): Likewise. (elf_i386_nacl_eh_frame_plt): Likewise. (elf_i386_nacl_plt): Likewise. (elf32_i386_nacl_elf_object_p): Likewise. (elf_i386_get_synthetic_symtab): Updated. (elf_i386_link_setup_gnu_properties): Likewise. * elf64-x86-64.c: Don't include "elf-nacl.h". (elf_x86_64_nacl_plt): Removed. (elf64_x86_64_nacl_elf_object_p): Likewise. (elf_x86_64_nacl_plt0_entry): Likewise. (elf_x86_64_nacl_plt_entry): Likewise. (elf_x86_64_nacl_eh_frame_plt): Likewise. (elf_x86_64_nacl_plt): Likewise. (elf32_x86_64_nacl_elf_object_p): Likewise. (elf_x86_64_get_synthetic_symtab): Updated. (elf_x86_64_link_setup_gnu_properties): Likewise. * elfxx-x86.c (_bfd_x86_elf_link_setup_gnu_properties): Likewise. * targets.c: Remove x86 NaCl target vectors. * bfd-in2.h: Regenerated. * configure: Likewise. binutils/ * NEWS: Mention x86 NaCl target support removal. * dwarf.c (init_dwarf_regnames_by_bfd_arch_and_mach): Remove x86 NaCl target support. * testsuite/binutils-all/elfedit-1.d: Likewise. * testsuite/binutils-all/i386/i386.exp: Likewise. * testsuite/binutils-all/x86-64/objects.exp: Likewise. * testsuite/binutils-all/x86-64/pr23494a-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e.d: Likewise. * testsuite/binutils-all/x86-64/x86-64.exp: Likewise. gas/ * NEWS: Mention x86 NaCl target support removal. * config/tc-i386.c: Remove x86 NaCl target support. * config/tc-i386.h: Likewise. * configure.tgt: Likewise. * testsuite/gas/i386/i386.exp: Likewise. * testsuite/gas/i386/iamcu-1.d: Likewise. * testsuite/gas/i386/iamcu-2.d: Likewise. * testsuite/gas/i386/iamcu-3.d: Likewise. * testsuite/gas/i386/iamcu-4.d: Likewise. * testsuite/gas/i386/iamcu-5.d: Likewise. * testsuite/gas/i386/k1om.d: Likewise. * testsuite/gas/i386/l1om.d: Likewise. ld/ * Makefile.am (ALL_EMULATION_SOURCES): Remove eelf_i386_nacl.c, eelf32_x86_64_nacl.c, eelf_x86_64_nacl.c. Remove x86 NaCl dep files. * NEWS: Mention x86 NaCl target support removal. * configure.tgt: Remove x86 NaCl target support. * testsuite/ld-elf/binutils.exp: Likewise. * testsuite/ld-elf/elf.exp: Likewise. * testsuite/ld-elfvers/vers.exp: Likewise. * testsuite/ld-i386/align-branch-1.d: Likewise. * testsuite/ld-i386/export-class.exp: Likewise. * testsuite/ld-i386/i386.exp: Likewise. * testsuite/ld-i386/load1.d: Likewise. * testsuite/ld-i386/pie1.d: Likewise. * testsuite/ld-i386/pr12570a.d: Likewise. * testsuite/ld-i386/pr12570b.d: Likewise. * testsuite/ld-i386/pr19636-1d.d: Likewise. * testsuite/ld-i386/pr19636-1l.d: Likewise. * testsuite/ld-i386/pr19636-2c.d: Likewise. * testsuite/ld-i386/pr19636-2d.d: Likewise. * testsuite/ld-i386/pr19636-2e.d: Likewise. * testsuite/ld-i386/pr20244-1a.d: Likewise. * testsuite/ld-i386/pr20244-1b.d: Likewise. * testsuite/ld-i386/pr20244-2a.d: Likewise. * testsuite/ld-i386/pr20244-2b.d: Likewise. * testsuite/ld-i386/pr20244-2c.d: Likewise. * testsuite/ld-i386/pr20244-4a.d: Likewise. * testsuite/ld-i386/pr20244-4b.d: Likewise. * testsuite/ld-i386/pr21884.d: Likewise. * testsuite/ld-ifunc/binutils.exp: Likewise. * testsuite/ld-ifunc/ifunc-10-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-10-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-11-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-11-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-12-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-12-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-13-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-13-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14c-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14c-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14d-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14d-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14e-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14e-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14f-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14f-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-15-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-15-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-16-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-16-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-16-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-16-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-17a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-17a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-17b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-17b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-18a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-18a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-18b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-18b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-19a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-19a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-19b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-19b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-2-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-2-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-20-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-20-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-21-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-21-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-22-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-22-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5r-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5r-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-6a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-6a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-6b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-6b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-7a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-7a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-7b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-7b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-8-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-8-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-9-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-9-x86-64.d: Likewise. * testsuite/ld-ifunc/pr17154-i386-now.d: Likewise. * testsuite/ld-ifunc/pr17154-i386.d: Likewise. * testsuite/ld-ifunc/pr17154-x86-64-now.d: Likewise. * testsuite/ld-ifunc/pr17154-x86-64.d: Likewise. * testsuite/ld-plugin/lto.exp: Likewise. * testsuite/ld-x86-64/align-branch-1.d: Likewise. * testsuite/ld-x86-64/dwarfreloc.exp: Likewise. * testsuite/ld-x86-64/line.exp: Likewise. * testsuite/ld-x86-64/load1a.d: Likewise. * testsuite/ld-x86-64/load1b.d: Likewise. * testsuite/ld-x86-64/load1c.d: Likewise. * testsuite/ld-x86-64/load1d.d: Likewise. * testsuite/ld-x86-64/pie3.d: Likewise. * testsuite/ld-x86-64/pr18160.d: Likewise. * testsuite/ld-x86-64/pr19013-x32.d: Likewise. * testsuite/ld-x86-64/pr19013.d: Likewise. * testsuite/ld-x86-64/pr19636-2d.d: Likewise. * testsuite/ld-x86-64/pr19636-2l.d: Likewise. * testsuite/ld-x86-64/pr20253-1b.d: Likewise. * testsuite/ld-x86-64/pr20253-1d.d: Likewise. * testsuite/ld-x86-64/pr20253-1f.d: Likewise. * testsuite/ld-x86-64/pr20253-1h.d: Likewise. * testsuite/ld-x86-64/pr20253-1j.d: Likewise. * testsuite/ld-x86-64/pr20253-1l.d: Likewise. * testsuite/ld-x86-64/pr21884.d: Likewise. * testsuite/ld-x86-64/pr22393-3a.rd: Likewise. * testsuite/ld-x86-64/pr22393-3b.rd: Likewise. * testsuite/ld-x86-64/tlsgd10.dd: Likewise. * testsuite/ld-x86-64/tlsgd5.dd: Likewise. * testsuite/ld-x86-64/tlsgd8.dd: Likewise. * testsuite/ld-x86-64/x86-64.exp: Likewise. * emulparams/elf32_x86_64_nacl.sh: Removed. * emulparams/elf_i386_nacl.sh: Likewise. * emulparams/elf_x86_64_nacl.sh: Likewise. * testsuite/ld-i386/emit-relocs-nacl.rd: Likewise. * testsuite/ld-i386/load1-nacl.d: Likewise. * testsuite/ld-i386/pie1-nacl.d: Likewise. * testsuite/ld-i386/plt-nacl.pd: Likewise. * testsuite/ld-i386/plt-pic-nacl.pd: Likewise. * testsuite/ld-i386/pr17709-nacl.rd: Likewise. * testsuite/ld-i386/pr19636-1d-nacl.d: Likewise. * testsuite/ld-i386/pr19636-2c-nacl.d: Likewise. * testsuite/ld-i386/pr19636-2d-nacl.d: Likewise. * testsuite/ld-i386/pr19636-2e-nacl.d: Likewise. * testsuite/ld-i386/pr19827-nacl.rd: Likewise. * testsuite/ld-i386/pr21884-nacl.d: Likewise. * testsuite/ld-i386/pr21884-nacl.t: Likewise. * testsuite/ld-i386/tlsbin-nacl.rd: Likewise. * testsuite/ld-i386/tlsbin2-nacl.rd: Likewise. * testsuite/ld-i386/tlsbindesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsdesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsgdesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsnopic-nacl.rd: Likewise. * testsuite/ld-i386/tlspic-nacl.rd: Likewise. * testsuite/ld-i386/tlspic2-nacl.rd: Likewise. * testsuite/ld-x86-64/ilp32-4-nacl.d: Likewise. * testsuite/ld-x86-64/load1a-nacl.d: Likewise. * testsuite/ld-x86-64/load1b-nacl.d: Likewise. * testsuite/ld-x86-64/load1c-nacl.d: Likewise. * testsuite/ld-x86-64/load1d-nacl.d: Likewise. * testsuite/ld-x86-64/pie3-nacl.d: Likewise. * testsuite/ld-x86-64/plt-nacl.pd: Likewise. * testsuite/ld-x86-64/pr17709-nacl.rd: Likewise. * testsuite/ld-x86-64/pr19013-nacl.d: Likewise. * testsuite/ld-x86-64/pr19636-2d-nacl.d: Likewise. * testsuite/ld-x86-64/pr19827-nacl.rd: Likewise. * testsuite/ld-x86-64/pr21884-nacl.d: Likewise. * testsuite/ld-x86-64/pr21884-nacl.t: Likewise. * testsuite/ld-x86-64/split-by-file-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsbin-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsbin2-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsbindesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsdesc-nacl.pd: Likewise. * testsuite/ld-x86-64/tlsdesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsgdesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlspic-nacl.rd: Likewise. * testsuite/ld-x86-64/tlspic2-nacl.rd: Likewise. * Makefile.in: Regenerated. * po/BLD-POTFILES.in: Likewise.
2020-06-30solaris XPASS ld-elf/group1Alan Modra1-1/+1
* testsuite/ld-elf/group1.d: Don't xfail all solaris targets, just ix86 and x86_64.
2020-06-30Don't xfail nds32 for ld-elf/reloc-discard testAlan Modra1-1/+1
* testsuite/ld-elf/reloc-discard.d: Don't xfail nds32.
2020-06-30microblaze-linux XPASS ld-elf/var1Alan Modra1-1/+1
microblaze-linux uses the standard ELF script, microblaze-elf its own script lacking an input section pattern needed to make this test pass. Add the missing pattern for .data, in line with most other sections that do have .* patterns. * scripttempl/elfmicroblaze.sc (.data): Add .data.* entry. * testsuite/ld-elf/var1.d: Don't xfail microblaze.
2020-06-29tic6x: Call _bfd_elf_add_dynamic_tagsH.J. Lu13-39/+39
Update tic6x linker tests to expect C6000_DSBT_BASE, C6000_DSBT_SIZE and C6000_DSBT_INDEX dynamic tags immediately before NULL dynamic tag. bfd/ * elf32-tic6x.c (elf32_tic6x_size_dynamic_sections): Call _bfd_elf_add_dynamic_tags. ld/ * testsuite/ld-tic6x/shlib-1.rd: Move C6000_DSBT_BASE, C6000_DSBT_SIZE and C6000_DSBT_INDEX dynamic tags to the last. * testsuite/ld-tic6x/shlib-1b.rd: Likewise. * testsuite/ld-tic6x/shlib-1r.rd: Likewise. * testsuite/ld-tic6x/shlib-1rb.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1b.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1r.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1rb.rd: Likewise. * testsuite/ld-tic6x/shlib-noindex.rd: Likewise. * testsuite/ld-tic6x/static-app-1.rd: Likewise. * testsuite/ld-tic6x/static-app-1b.rd: Likewise. * testsuite/ld-tic6x/static-app-1r.rd: Likewise. * testsuite/ld-tic6x/static-app-1rb.rd: Likewise.
2020-06-29x86_64 k1om testsAlan Modra3-0/+3
On x86_64-nacl we currently see FAIL: Absolute non-overflowing relocs FAIL: ld-x86-64/protected2-k1om FAIL: ld-x86-64/protected3-k1om This limits the tests as per the l1om variants. * testsuite/ld-x86-64/abs-k1om.d: Run only on x86_64-*-linux*. * testsuite/ld-x86-64/protected2-k1om.d: Likewise. * testsuite/ld-x86-64/protected3-k1om.d: Likewise.
2020-06-26ld/x86: actually invoke k1om testsJan Beulich1-0/+3
Unlike claimed by the ChangeLog entries added by 7a9068fe1646 ("Add initial Intel K1OM support") these tests did never get enabled.
2020-06-26m68k: tag floating-point ABI usedPat Bernardi13-0/+73
This patch adds GNU attribute support to m68k and utilises it to tag the floating-point calling convention used (hard-float or soft-float). It enables the linker to ensure linked objects use a consistent floating-point ABI and allows tools like GDB to infer the ABI used from the ELF file. It is based on similar work done for PowerPC. bfd/ * elf32-m68k.c (m68k_elf_merge_obj_attributes): New function. (elf32_m68k_merge_private_bfd_data): Merge GNU attributes. binutils/ * readelf.c (display_m68k_gnu_attribute): New function. (process_arch_specific): Call display_m68k_gnu_attribute for EM_68K. gas/ * config/tc-m68k.c (m68k_elf_gnu_attribute): New function. (md_pseudo_table): Handle "gnu_attribute". * doc/as.texi: Document GNU attribute for M68K. include/ * elf/m68k.h: Add enum for GNU object attribute with floating point tag name and values. ld/ * testsuite/ld-m68k/attr-gnu-4-0.s: New file. * testsuite/ld-m68k/attr-gnu-4-1.s: Likewise. * testsuite/ld-m68k/attr-gnu-4-2.s: Likewise. * testsuite/ld-m68k/attr-gnu-4-00.d: Likewise. * testsuite/ld-m68k/attr-gnu-4-01.d: Likewise. * testsuite/ld-m68k/attr-gnu-4-02.d: Likewise. * testsuite/ld-m68k/attr-gnu-4-10.d: Likewise. * testsuite/ld-m68k/attr-gnu-4-11.d: Likewise. * testsuite/ld-m68k/attr-gnu-4-12.d: Likewise. * testsuite/ld-m68k/attr-gnu-4-20.d: Likewise. * testsuite/ld-m68k/attr-gnu-4-21.d: Likewise. * testsuite/ld-m68k/attr-gnu-4-22.d: Likewise. * testsuite/ld-m68k/m68k.exp: Run the new tests.
2020-06-24csky: Don't generate unnecessary dynamic tagsH.J. Lu2-8/+2
Dynamic tags, DT_JMPREL, PLTREL and PLTRELSZ, are needed only if there are relocation entries for PLT. Don't generate them if there are no relocation entries for PLT. bfd/ PR ld/26083 * elf32-csky.c (csky_elf_size_dynamic_sections): Call _bfd_elf_add_dynamic_tags. ld/ PR ld/26083 * testsuite/ld-csky/tls-ie-v1.d: Updated. * testsuite/ld-csky/tls-ie.d: Likewise.
2020-06-24cris: Don't generate unnecessary dynamic tagsH.J. Lu4-11/+33
Dynamic tags, DT_JMPREL, PLTREL and PLTRELSZ, are needed only if there are relocation entries for PLT. Don't generate them if there are no relocation entries for PLT. bfd/ PR ld/26083 * elf32-cris.c (elf_cris_size_dynamic_sections): Call _bfd_elf_add_dynamic_tags. ld/ PR ld/26083 * testsuite/ld-cris/libdso-15b.d: Updated. * testsuite/ld-cris/libdso-1c.d: Likewise. * testsuite/ld-cris/libdso-1d.d: Likewise. * testsuite/ld-cris/libdso-15c.d: New file.
2020-06-24ld: Set non_ir_ref_regular on source for assignmentH.J. Lu3-0/+36
We need to set non_ir_ref_regular on the source for assignment to get the correct LTO resolution: 190 a27be7f4ad90c5ce PREVAILING_DEF real_g instead of 190 30c3b2d8f967f5ea PREVAILING_DEF_IRONLY real_g PR ld/26163 * ldexp.c (exp_fold_tree_1): Set non_ir_ref_regular on the source for assignment. * testsuite/ld-plugin/lto.exp: Run ld/26163 test. * testsuite/ld-plugin/pr26163a.c: New file. * testsuite/ld-plugin/pr26163b.c: Likewise.
2020-06-23Correct bfin XPASSesAlan Modra1-17/+15
bfin-elf and bfin-linux differ. This patch fixes these: bfin-linux-uclibc -XPASS: PR ld/14170 bfin-linux-uclibc -XPASS: pr17068 link --as-needed lib in group bfin-linux-uclibc -XPASS: -Bsymbolic-functions bfin-linux-uclibc -XPASS: pr22374 function pointer initialization * testsuite/ld-elf/shared.exp (pr14170): Clear xfail for bfin-*-linux*. (pr17068, symbolic-func.so, pr22374): Likewise.
2020-06-22RISC-V: Report warning when linking the objects with different priv specs.Nelson Chu6-6/+54
We do know some conflicts among different privileged specs. For linker, the safest approach is that don't allow the object linked with others which may cause conflicts. But this may cause inconvenience since not all objects with conflicting priv specs are linked will cause problems. But it is hard to know the detailed conflict cases for linker, so we probably need a option to tell linker that we do know there are no conflicts, or we are willing to take risks to link the objects with conflicted priv specs. But the option is still under discussion. Therefore, we can report warnings rather than errors when linking the objects with conflicted priv specs. This not only makes the linker more flexible, but also warns people that the conflicts may happen. We also need to update the output priv spec version once the input priv spec is newer. bfd/ * elfxx-riscv.c (struct priv_spec_t priv_specs[]): Move them from opcodes/riscv-opc.c to bfd/elfxx-riscv.c, since we need it in linker. (riscv_get_priv_spec_class): Likewise. (riscv_get_priv_spec_name): Likewise. (riscv_get_priv_spec_class_from_numbers): New function, convert the version numbers into string, then call riscv_get_priv_spec_class to get the priv spec class. * elfxx-riscv.h (riscv_get_priv_spec_class): Move forward declaration from include/opcode/riscv.h to bfd/elfxx-riscv.h. (riscv_get_priv_spec_name): Likewise. (riscv_get_priv_spec_class_from_numbers): New forward declaration. (opcode/riscv.h): Include it in the header rather than elfxx-riscv.c. * elfnn-riscv.c (riscv_merge_attributes): Get the priv spec classes of input and output objects form their priv spec attributes by riscv_get_priv_spec_class_from_numbers. Report warning rather than errors when linking objects with differnet priv spec versions. We do know v1.9.1 may have conflicts to other versions, so report the warning, too. After that, update the output priv spec version to the newest one so far. gas/ * config/tc-riscv.c (buf_size, buf): Remove the unused variables. (riscv_set_default_priv_spec): Get the priv spec version from the priv spec attributes by riscv_get_priv_spec_class_from_numbers. include/ * opcode/riscv.h (riscv_get_priv_spec_class): Move the function forward declarations to bfd/elfxx-riscv.h. (riscv_get_priv_spec_name): Likewise. opcodes/ * riscv-opc.c: Move the structures and functions to bfd/elfxx-riscv.c. * riscv-dis.c: Include elfxx-riscv.h. ld/ * testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-01.d: Updated. * testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-02.d: Updated. * testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-03.d: Updated. * testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-04.d: Updated. * testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-05.d: Updated. * testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-06.d: Updated.
2020-06-20Remove perror from ld_assemble, ld_compile and ld_nmAlan Modra20-76/+66
ERROR should really be reserved for errors in the testsuite framework, not just normal errors from the tools under test. Removing use of perror has been suggested before but without action, over concerns that some test failures might be missed. This patch removes uses of perror in ld_assemble, ld_compile and ld_nm, and updates numerous places that ignored the result of these functions by inappropriately returning an "unresolved" test status. Net result over my large set of targets look good, in some cases improving the diagnostics, eg: i386-msdos -ERROR: tmpdir/script: nm failed i386-msdos -ERROR: tmpdir/script: nm failed i386-msdos -ERROR: tmpdir/script: nm failed i386-msdos -ERROR: tmpdir/script: nm failed i386-msdos +FAIL: script i386-msdos +FAIL: MRI script i386-msdos +FAIL: MEMORY i386-msdos +FAIL: MEMORY with symbols * testsuite/lib/ld-lib.exp (default_ld_compile): Don't perror on a compiler error. (default_ld_assemble): Similarly for an assembler error. (default_ld_nm): Similarly for an nm error. (run_ld_link_tests): Report ld_assemble errors as a fail. (check_as_cfi): Remove now unnecessary perror substitution. * testsuite/ld-elf/exclude.exp: Report ld_nm error return as test fails rather then unresolved. * testsuite/ld-gc/gc.exp: Likewise. * testsuite/ld-scripts/alignof.exp: Likewise. * testsuite/ld-scripts/defined.exp: Likewise. * testsuite/ld-scripts/script.exp: Likewise. * testsuite/ld-scripts/sizeof.exp: Likewise. * testsuite/ld-selective/selective.exp: Likewise. * testsuite/ld-scripts/extern.exp: Likewise. Return on ld_link failure. * testsuite/ld-elfweak/elfweak.exp: Report compiler errors as test unresolved. * testsuite/ld-fastcall/fastcall.exp: Report assember errors as test fails. * testsuite/ld-i386/i386.exp (iamcu_tests): Likewise. * testsuite/ld-ia64/line.exp: Likewise. * testsuite/ld-mep/mep.exp: Likewise. * testsuite/ld-mips-elf/mips-elf-flags.exp: Likewise. * testsuite/ld-nios2/nios2.exp: Likewise. * testsuite/ld-scripts/alignof.exp: Likewise. * testsuite/ld-x86-64/line.exp: Likewise. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-scripts/log2.exp: Formatting. * testsuite/ld-tic6x/tic6x.exp: Report ld_link errors as a test fail.
2020-06-20ecoff testsuite fixesAlan Modra5-25/+25
The aim of this change is to remove a whole lot of "assembly failed" errors for ecoff targets. * testsuite/ld-alpha/alpha.exp: Exclude *ecoff targets. * testsuite/ld-elf/binutils.exp: Likewise. * testsuite/ld-elf/tls.exp: Likewise. * testsuite/ld-elf/tls_common.exp: Likewise. * testsuite/ld-scripts/phdrs2.exp: Likewise.
2020-06-20SH gas configure and ld testsAlan Modra1-66/+66
All current SH gas targets use BFD. sh-coff was incorrectly reported as unsupported. gas/ * configure.tgt: Set bfd_gas for all SH targets. ld/ * testsuite/ld-sh/sh.exp: Don't run relax tests for non-ELF. Fail when ld_assemble fails. Use elseif to reduce indentation.
2020-06-19Re: ld testsuite fixes for alphaAlan Modra3-3/+3
I missed some. * testsuite/ld-plugin/pr22983.1.d: Accept st_other notations. * testsuite/ld-plugin/pr22983.2.d: Likewise. * testsuite/ld-plugin/pr22983.4.d: Likewise.
2020-06-19ld testsuite fixes for alphaAlan Modra8-11/+11
Some tests failed just due to st_other info, eg. [NOPV], being emitted by readelf or objdump. Fix that. Also since alpha doesn't support ifunc, don't run the ifunc tests for alpha. * testsuite/ld-elf/dynamic-1.rd: Accept st_other notations. * testsuite/ld-elf/rdynamic-1.rd: Likewise. * testsuite/ld-elf/pr9676.rd: Likewise. * testsuite/ld-elf/pr9679.rd: Likewise. * testsuite/ld-elfvers/vers30.dsym: Likewise. * testsuite/ld-elfvers/vers31.dsym: Likewise. * testsuite/ld-plugin/pr22983.3.d: Likewise. * testsuite/ld-ifunc/ifunc.exp: Exclude alpha.
2020-06-19Emit a warning when -z relro is unsupportedAlan Modra6-23/+17
ld silently accepts -z relro and -z norelro for targets that lack the necessary GNU_RELRO support. This patch makes those targets emit a warning instead, and adds testsuite infrastructure to detect when relro is unsupported. binutils/ * testsuite/config/default.exp (ld_elf_shared_opt): Don't set. * testsuite/lib/binutils-common.exp (check_relro_support): New proc. (run_dump_test): Use check_relro_support to decide whether to pass extra ld option "-z norelro". ld/ * emultempl/elf.em (gld${EMULATION_NAME}_handle_option): Omit -z relro and -z norelro when target support for GNU_RELRO is lacking. (gld${EMULATION_NAME}_before_parse): Ignore RELRO default too. * emultempl/aarch64elf.em (gld${EMULATION_NAME}_before_parse): Ignore RELRO default when target support for GNU_RELRO is lacking. * emultempl/armelf.em (gld${EMULATION_NAME}_before_parse): Likewise. * emultempl/linux.em (gld${EMULATION_NAME}_before_parse): Likewise. * emultempl/scoreelf.em (gld${EMULATION_NAME}_before_parse): Likewise. * testsuite/config/default.exp (ld_elf_shared_opt): Don't set. * testsuite/ld-elf/pr16322.d: xfail when no relro support. * testsuite/ld-elf/pr22393-1a.d: Likewise. * testsuite/ld-elf/pr22393-1b.d: Likewise. * testsuite/ld-elf/shared.exp (pr20995-2.so, pr20995-2): Likewise. * testsuite/lib/ld-lib.exp (run_ld_link_tests): Use check_relro_support to decide whether to pass extra ld option "-z norelro".
2020-06-17ld: Suppress warning for unsupported attribute from older GCCH.J. Lu1-0/+3
Suppress warning for unsupported attribute from older GCC: .../ld/testsuite/ld-elf/pr25754-1a.c:9: warning: 'noclone' attribute directive ignored .../ld/testsuite/ld-elf/pr25754-1a.c:9: warning: 'noclone' attribute directive ignored ERROR: .../ld/testsuite/ld-elf/pr25754-1a.c: compilation failed UNRESOLVED: Build pr25754-1a ( ) * testsuite/ld-elf/linux-x86.exp (check_pr25749a): Append "-w" to cflags.
2020-06-17ld: Require GCC 5 for Build pr25749-1b (-pie -fPIE)H.J. Lu1-1/+1
Before GCC 5, Build pr25749-1b (-pie -fPIE) won't trigger the expected linker error. * testsuite/ld-elf/linux-x86.exp: Require GCC 5 for Build pr25749-1b (-pie -fPIE).
2020-06-16Re: Use __asm__ rather than asm in ld testsuiteAlan Modra2-3/+3
* testsuite/ld-elf/pr19553c.c: Replace asm with __asm__. * testsuite/ld-elfvers/vers27b.c: Likewise.
2020-06-16Use __asm__ rather than asm in ld testsuiteAlan Modra28-72/+75
* testsuite/ld-elf/pr23428.c: Define _DEFAULT_SOURCE. * testsuite/ld-elf/indirect1b.c: Replace asm with __asm__. * testsuite/ld-elf/indirect2.c: Likewise. * testsuite/ld-elf/indirect3b.c: Likewise. * testsuite/ld-elf/indirect4b.c: Likewise. * testsuite/ld-elf/pr14323-2.c: Likewise. * testsuite/ld-elf/pr18720b.c: Likewise. * testsuite/ld-elf/pr23428.c: Likewise. * testsuite/ld-elfvsb/common.c: Likewise. * testsuite/ld-elfvsb/main.c: Likewise. * testsuite/ld-elfvsb/sh1.c: Likewise. * testsuite/ld-elfvsb/test.c: Likewise. * testsuite/ld-pe/aligncomm-1.c: Likewise. * testsuite/ld-pe/aligncomm-2.c: Likewise. * testsuite/ld-pe/aligncomm-3.c: Likewise. * testsuite/ld-pe/aligncomm-4.c: Likewise. * testsuite/ld-plugin/pr23958.c: Likewise. * testsuite/ld-size/size-1b.c: Likewise. * testsuite/ld-size/size-2b.c: Likewise. * testsuite/ld-size/size-3a.c: Likewise. * testsuite/ld-size/size-3b.c: Likewise. * testsuite/ld-size/size-3c.c: Likewise. * testsuite/ld-size/size-4b.c: Likewise. * testsuite/ld-size/size-5b.c: Likewise. * testsuite/ld-size/size-6a.c: Likewise. * testsuite/ld-size/size-7a.c: Likewise. * testsuite/ld-size/size-8a.c: Likewise. * testsuite/ld-size/size-9b.c: Likewise. * testsuite/ld-size/size-10b.c: Likewise.
2020-06-16Really remove tic30-aout supportAlan Modra2-3/+3
bfd/ * aout-tic30.c: Delete file. * Makefile.am (BFD32_BACKENDS): Remove aout-tic30.lo. (BFD32_BACKENDS_CFILES): Remove aout-tic30.c. * config.bfd (c30-*-*aout*, tic30-*-*aout*): Remove entry. (xc16x-*-elf): Sort properly. * configure.ac: Remove tic30_aout_vec. * targets.c: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. gas/ * config/tc-tic30.h: Remove OBJ_AOUT support. * configure.tgt: Delete tic30-*-*aout* entry. ld/ * emulparams/tic30aout.sh: Delete file. * scripttempl/tic30aout.sc: Delete file. * Makefile.am: Remove etic30aout.c from ALL_EMULATION_SOURCES and delete dependency. * configure.tgt: Delete tic30-*-*aout* entry. * testsuite/ld-scripts/sane1.d: Delete tic30-*-aout mention. * testsuite/ld-scripts/segment-start.d: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2020-06-15Unnecessary load_lib in ld testsuiteAlan Modra6-18/+1
ld-lib.exp is loaded in config/defaults.exp * testsuite/ld-scripts/include.exp: Don't load ld-lib.exp. * testsuite/ld-scripts/phdrs3.exp: Likewise. * testsuite/ld-scripts/rgn-at.exp: Likewise. * testsuite/ld-scripts/rgn-over.exp: Likewise. * testsuite/ld-scripts/sort.exp: Likewise. * testsuite/ld-discard/discard.exp: Likewise. Use is_elf_format.
generated by cgit v1.1 at 2024-11-20 12:24:17 +0000